diff options
Diffstat (limited to 'Documentation')
27 files changed, 1992 insertions, 40 deletions
diff --git a/Documentation/Makefile b/Documentation/Makefile index 5a340fd492..304b31edee 100644 --- a/Documentation/Makefile +++ b/Documentation/Makefile @@ -1,9 +1,9 @@ MAN1_TXT= \ $(filter-out $(addsuffix .txt, $(ARTICLES) $(SP_ARTICLES)), \ $(wildcard git-*.txt)) \ - gitk.txt git.txt + gitk.txt gitweb.txt git.txt MAN5_TXT=gitattributes.txt gitignore.txt gitmodules.txt githooks.txt \ - gitrepository-layout.txt + gitrepository-layout.txt gitweb.conf.txt MAN7_TXT=gitcli.txt gittutorial.txt gittutorial-2.txt \ gitcvs-migration.txt gitcore-tutorial.txt gitglossary.txt \ gitdiffcore.txt gitnamespaces.txt gitrevisions.txt gitworkflows.txt diff --git a/Documentation/RelNotes/1.7.8.txt b/Documentation/RelNotes/1.7.8.txt new file mode 100644 index 0000000000..b4d90bba0f --- /dev/null +++ b/Documentation/RelNotes/1.7.8.txt @@ -0,0 +1,161 @@ +Git v1.7.8 Release Notes +======================== + +Updates since v1.7.7 +-------------------- + + * Some git-svn, git-gui, git-p4 (in contrib) and msysgit updates. + + * Updates to bash completion scripts. + + * The build procedure has been taught to take advantage of computed + dependency automatically when the complier supports it. + + * The date parser now accepts timezone designators that lack minutes + part and also has a colon between "hh:mm". + + * The contents of the /etc/mailname file, if exists, is used as the + default value of the hostname part of the committer/author e-mail. + + * "git am" learned how to read from patches generated by Hg. + + * "git archive" talking with a remote repository can report errors + from the remote side in a more informative way. + + * "git branch" learned an explicit --list option to ask for branches + listed, optionally with a glob matching pattern to limit its output. + + * "git check-attr" learned "--cached" option to look at .gitattributes + files from the index, not from the working tree. + + * Variants of "git cherry-pick" and "git revert" that take multiple + commits learned to "--continue" and "--abort". + + * "git daemon" gives more human readble error messages to clients + using ERR packets when appropriate. + + * Errors at the network layer is logged by "git daemon". + + * "git diff" learned "--minimal" option to spend extra cycles to come + up with a minimal patch output. + + * "git diff" learned "--function-context" option to show the whole + function as context that was affected by a change. + + * "git difftool" can be told to skip launching the tool for a path by + answering 'n' to its prompt. + + * "git fetch" learned to honor transfer.fsckobjects configuration to + validate the objects that were received from the other end, just like + "git receive-pack" (the receiving end of "git push") does. + + * "git fetch" makes sure that the set of objects it received from the + other end actually completes the history before updating the refs. + "git receive-pack" (the receiving end of "git push") learned to do the + same. + + * "git fetch" learned that fetching/cloning from a regular file on the + filesystem is not necessarily a request to unpack a bundle file; the + file could be ".git" with "gitdir: <path>" in it. + + * "git for-each-ref" learned "%(contents:subject)", "%(contents:body)" + and "%(contents:signature)". The last one is useful for signed tags. + + * "git grep" used to incorrectly pay attention to .gitignore files + scattered in the directory it was working in even when "--no-index" + option was used. It no longer does this. The "--exclude-standard" + option needs to be given to explicitly activate the ignore + mechanism. + + * "git grep" learned "--untracked" option, where given patterns are + searched in untracked (but not ignored) files as well as tracked + files in the working tree, so that matches in new but not yet + added files do not get missed. + + * The recursive merge backend no longer looks for meaningless + existing merges in submodules unless in the outermost merge. + + * "git log" and friends learned "--children" option. + + * "git ls-remote" learned to respond to "-h"(elp) requests. + + * "mediawiki" remote helper can interact with (surprise!) MediaWiki + with "git fetch" & "git push". + + * "git merge" learned the "--edit" option to allow users to edit the + merge commit log message. + + * "git rebase -i" can be told to use special purpose editor suitable + only for its insn sheet via sequence.editor configuration variable. + + * "git send-email" learned to respond to "-h"(elp) requests. + + * "git send-email" allows the value given to sendemail.aliasfile to begin + with "~/" to refer to the $HOME directory. + + * "git send-email" forces use of Authen::SASL::Perl to work around + issues between Authen::SASL::Cyrus and AUTH PLAIN/LOGIN. + + * "git stash" learned "--include-untracked" option to stash away + untracked/ignored cruft from the working tree. + + * "git submodule clone" does not leak an error message to the UI + level unnecessarily anymore. + + * "git submodule update" learned to honor "none" as the value for + submodule.<name>.update to specify that the named submodule should + not be checked out by default. + + * When populating a new submodule directory with "git submodule init", + the $GIT_DIR metainformation directory for submodules is created inside + $GIT_DIR/modules/<name>/ directory of the superproject and referenced + via the gitfile mechanism. This is to make it possible to switch + between commits in the superproject that has and does not have the + submodule in the tree without re-cloning. + + * "gitweb" leaked unescaped control characters from syntax hiliter + outputs. + + * "gitweb" can be told to give custom string at the end of the HTML + HEAD element. + + * "gitweb" now has its own manual pages. + + +Also contains other documentation updates and minor code cleanups. + + +Fixes since v1.7.7 +------------------ + +Unless otherwise noted, all fixes in the 1.7.7.X maintenance track are +included in this release. + + * HTTP transport did not use pushurl correctly, and also did not tell + what host it is trying to authenticate with when asking for + credentials. + (merge deba493 jk/http-auth later to maint). + + * "git blame" was aborted if started from an uncommitted content and + the path had the textconv filter in effect. + (merge 8518088 ss/blame-textconv-fake-working-tree later to maint). + + * Adding many refs to the local repository in one go (e.g. "git fetch" + that fetches many tags) and looking up a ref by name in a repository + with too many refs were unnecessarily slow. + (merge 17d68a54d jp/get-ref-dir-unsorted later to maint). + + * Report from "git commit" on untracked files was confused under + core.ignorecase option. + (merge 395c7356 jk/name-hash-dirent later to maint). + + * "git merge" did not understand ":/<pattern>" as a way to name a commit. + + " "git push" on the receiving end used to call post-receive and post-update + hooks for attempted removal of non-existing refs. + (merge 160b81ed ph/push-to-delete-nothing later to maint). + + * Help text for "git remote set-url" and "git remote set-branches" + were misspelled. + (merge c49904e fc/remote-seturl-usage-fix later to maint). + (merge 656cdf0 jc/remote-setbranches-usage-fix later to maint). diff --git a/Documentation/blame-options.txt b/Documentation/blame-options.txt index e76195ac97..d4a51da464 100644 --- a/Documentation/blame-options.txt +++ b/Documentation/blame-options.txt @@ -117,5 +117,4 @@ commit. And the default value is 40. If there are more than one take effect. -h:: ---help:: Show help message. diff --git a/Documentation/config.txt b/Documentation/config.txt index eae75a39c0..5a841da6d4 100644 --- a/Documentation/config.txt +++ b/Documentation/config.txt @@ -45,9 +45,10 @@ lines. Variables may belong directly to a section or to a given subsection. You can have `[section]` if you have `[section "subsection"]`, but you don't need to. -There is also a case insensitive alternative `[section.subsection]` syntax. -In this syntax, subsection names follow the same restrictions as for section -names. +There is also a deprecated `[section.subsection]` syntax. With this +syntax, the subsection name is converted to lower-case and is also +compared case sensitively. These subsection names follow the same +restrictions as section names. All the other lines (and the remainder of the line after the section header) are recognized as setting variables, in the form @@ -473,6 +474,12 @@ core.editor:: variable when it is set, and the environment variable `GIT_EDITOR` is not set. See linkgit:git-var[1]. +sequence.editor:: + Text editor used by `git rebase -i` for editing the rebase insn file. + The value is meant to be interpreted by the shell when it is used. + It can be overridden by the `GIT_SEQUENCE_EDITOR` environment variable. + When not configured the default commit message editor is used instead. + core.pager:: The command that git will use to paginate output. Can be overridden with the `GIT_PAGER` environment @@ -857,6 +864,13 @@ fetch.recurseSubmodules:: when its superproject retrieves a commit that updates the submodule's reference. +fetch.fsckObjects:: + If it is set to true, git-fetch-pack will check all fetched + objects. It will abort in the case of a malformed object or a + broken link. The result of an abort are only dangling objects. + Defaults to false. If not set, the value of `transfer.fsckObjects` + is used instead. + fetch.unpackLimit:: If the number of objects fetched over the git native transfer is below this @@ -1064,6 +1078,23 @@ All gitcvs variables except for 'gitcvs.usecrlfattr' and is one of "ext" and "pserver") to make them apply only for the given access method. +gitweb.category:: +gitweb.description:: +gitweb.owner:: +gitweb.url:: + See linkgit:gitweb[1] for description. + +gitweb.avatar:: +gitweb.blame:: +gitweb.grep:: +gitweb.highlight:: +gitweb.patches:: +gitweb.pickaxe:: +gitweb.remote_heads:: +gitweb.showsizes:: +gitweb.snapshot:: + See linkgit:gitweb.conf[5] for description. + grep.lineNumber:: If set to true, enable '-n' option by default. @@ -1596,7 +1627,8 @@ receive.fsckObjects:: If it is set to true, git-receive-pack will check all received objects. It will abort in the case of a malformed object or a broken link. The result of an abort are only dangling objects. - Defaults to false. + Defaults to false. If not set, the value of `transfer.fsckObjects` + is used instead. receive.unpackLimit:: If the number of objects received in a push is below this @@ -1831,6 +1863,11 @@ tar.umask:: archiving user's umask will be used instead. See umask(2) and linkgit:git-archive[1]. +transfer.fsckObjects:: + When `fetch.fsckObjects` or `receive.fsckObjects` are + not set, the value of this variable is used instead. + Defaults to false. + transfer.unpackLimit:: When `fetch.unpackLimit` or `receive.unpackLimit` are not set, the value of this variable is used instead. diff --git a/Documentation/diff-options.txt b/Documentation/diff-options.txt index 66624a1769..9f7cba2be6 100644 --- a/Documentation/diff-options.txt +++ b/Documentation/diff-options.txt @@ -408,6 +408,10 @@ endif::git-format-patch[] Show the context between diff hunks, up to the specified number of lines, thereby fusing hunks that are close to each other. +-W:: +--function-context:: + Show whole surrounding functions of changes. + ifndef::git-format-patch[] ifndef::git-log[] --exit-code:: diff --git a/Documentation/git-branch.txt b/Documentation/git-branch.txt index 507b8d0ab2..f46013c91f 100644 --- a/Documentation/git-branch.txt +++ b/Documentation/git-branch.txt @@ -9,8 +9,8 @@ SYNOPSIS -------- [verse] 'git branch' [--color[=<when>] | --no-color] [-r | -a] - [-v [--abbrev=<length> | --no-abbrev]] - [(--merged | --no-merged | --contains) [<commit>]] + [--list] [-v [--abbrev=<length> | --no-abbrev]] + [(--merged | --no-merged | --contains) [<commit>]] [<pattern>...] 'git branch' [--set-upstream | --track | --no-track] [-l] [-f] <branchname> [<start-point>] 'git branch' (-m | -M) [<oldbranch>] <newbranch> 'git branch' (-d | -D) [-r] <branchname>... @@ -20,7 +20,11 @@ DESCRIPTION With no arguments, existing branches are listed and the current branch will be highlighted with an asterisk. Option `-r` causes the remote-tracking -branches to be listed, and option `-a` shows both. +branches to be listed, and option `-a` shows both. This list mode is also +activated by the `--list` option (see below). +<pattern> restricts the output to matching branches, the pattern is a shell +wildcard (i.e., matched using fnmatch(3)) +Multiple patterns may be given; if any of them matches, the tag is shown. With `--contains`, shows only the branches that contain the named commit (in other words, the branches whose tip commits are descendants of the @@ -64,6 +68,7 @@ way to clean up all obsolete remote-tracking branches. OPTIONS ------- -d:: +--delete:: Delete a branch. The branch must be fully merged in its upstream branch, or in `HEAD` if no upstream was set with `--track` or `--set-upstream`. @@ -72,6 +77,7 @@ OPTIONS Delete a branch irrespective of its merged status. -l:: +--create-reflog:: Create the branch's reflog. This activates recording of all changes made to the branch ref, enabling use of date based sha1 expressions such as "<branchname>@\{yesterday}". @@ -84,6 +90,7 @@ OPTIONS already. Without `-f` 'git branch' refuses to change an existing branch. -m:: +--move:: Move/rename a branch and the corresponding reflog. -M:: @@ -100,14 +107,21 @@ OPTIONS Same as `--color=never`. -r:: +--remotes:: List or delete (if used with -d) the remote-tracking branches. -a:: +--all:: List both remote-tracking branches and local branches. +--list:: + Activate the list mode. `git branch <pattern>` would try to create a branch, + use `git branch --list <pattern>` to list matching branches. + -v:: --verbose:: - Show sha1 and commit subject line for each head, along with + When in list mode, + show sha1 and commit subject line for each head, along with relationship to upstream branch (if any). If given twice, print the name of the upstream branch, as well. diff --git a/Documentation/git-check-attr.txt b/Documentation/git-check-attr.txt index 1f7312a189..5abdbaa51c 100644 --- a/Documentation/git-check-attr.txt +++ b/Documentation/git-check-attr.txt @@ -24,6 +24,9 @@ OPTIONS paths. If this option is used, then 'unspecified' attributes will not be included in the output. +--cached:: + Consider `.gitattributes` in the index only, ignoring the working tree. + --stdin:: Read file names from stdin instead of from the command-line. diff --git a/Documentation/git-check-ref-format.txt b/Documentation/git-check-ref-format.txt index c9fdf84a08..103e7b128d 100644 --- a/Documentation/git-check-ref-format.txt +++ b/Documentation/git-check-ref-format.txt @@ -8,8 +8,9 @@ git-check-ref-format - Ensures that a reference name is well formed SYNOPSIS -------- [verse] -'git check-ref-format' <refname> -'git check-ref-format' --print <refname> +'git check-ref-format' [--normalize] + [--[no-]allow-onelevel] [--refspec-pattern] + <refname> 'git check-ref-format' --branch <branchname-shorthand> DESCRIPTION @@ -28,22 +29,28 @@ git imposes the following rules on how references are named: . They can include slash `/` for hierarchical (directory) grouping, but no slash-separated component can begin with a - dot `.`. + dot `.` or end with the sequence `.lock`. . They must contain at least one `/`. This enforces the presence of a category like `heads/`, `tags/` etc. but the actual names are not - restricted. + restricted. If the `--allow-onelevel` option is used, this rule + is waived. . They cannot have two consecutive dots `..` anywhere. . They cannot have ASCII control characters (i.e. bytes whose values are lower than \040, or \177 `DEL`), space, tilde `~`, - caret `{caret}`, colon `:`, question-mark `?`, asterisk `*`, - or open bracket `[` anywhere. + caret `{caret}`, or colon `:` anywhere. -. They cannot end with a slash `/` nor a dot `.`. +. They cannot have question-mark `?`, asterisk `{asterisk}`, or open + bracket `[` anywhere. See the `--refspec-pattern` option below for + an exception to this rule. -. They cannot end with the sequence `.lock`. +. They cannot begin or end with a slash `/` or contain multiple + consecutive slashes (see the `--normalize` option below for an + exception to this rule) + +. They cannot end with a dot `.`. . They cannot contain a sequence `@{`. @@ -68,16 +75,36 @@ reference name expressions (see linkgit:gitrevisions[7]): . at-open-brace `@{` is used as a notation to access a reflog entry. -With the `--print` option, if 'refname' is acceptable, it prints the -canonicalized name of a hypothetical reference with that name. That is, -it prints 'refname' with any extra `/` characters removed. - With the `--branch` option, it expands the ``previous branch syntax'' `@{-n}`. For example, `@{-1}` is a way to refer the last branch you were on. This option should be used by porcelains to accept this syntax anywhere a branch name is expected, so they can act as if you typed the branch name. +OPTIONS +------- +--allow-onelevel:: +--no-allow-onelevel:: + Controls whether one-level refnames are accepted (i.e., + refnames that do not contain multiple `/`-separated + components). The default is `--no-allow-onelevel`. + +--refspec-pattern:: + Interpret <refname> as a reference name pattern for a refspec + (as used with remote repositories). If this option is + enabled, <refname> is allowed to contain a single `{asterisk}` + in place of a one full pathname component (e.g., + `foo/{asterisk}/bar` but not `foo/bar{asterisk}`). + +--normalize:: + Normalize 'refname' by removing any leading slash (`/`) + characters and collapsing runs of adjacent slashes between + name components into a single slash. Iff the normalized + refname is valid then print it to standard output and exit + with a status of 0. (`--print` is a deprecated way to spell + `--normalize`.) + + EXAMPLES -------- @@ -90,7 +117,7 @@ $ git check-ref-format --branch @{-1} * Determine the reference name to use for a new branch: + ------------ -$ ref=$(git check-ref-format --print "refs/heads/$newbranch") || +$ ref=$(git check-ref-format --normalize "refs/heads/$newbranch") || die "we do not like '$newbranch' as a branch name." ------------ diff --git a/Documentation/git-cherry-pick.txt b/Documentation/git-cherry-pick.txt index 7cfa3d92ac..fed5097e00 100644 --- a/Documentation/git-cherry-pick.txt +++ b/Documentation/git-cherry-pick.txt @@ -9,6 +9,9 @@ SYNOPSIS -------- [verse] 'git cherry-pick' [--edit] [-n] [-m parent-number] [-s] [-x] [--ff] <commit>... +'git cherry-pick' --continue +'git cherry-pick' --quit +'git cherry-pick' --abort DESCRIPTION ----------- @@ -110,6 +113,10 @@ effect to your index in a row. Pass the merge strategy-specific option through to the merge strategy. See linkgit:git-merge[1] for details. +SEQUENCER SUBCOMMANDS +--------------------- +include::sequencer.txt[] + EXAMPLES -------- `git cherry-pick master`:: diff --git a/Documentation/git-commit-tree.txt b/Documentation/git-commit-tree.txt index 0fdb82ee86..02133d5fc9 100644 --- a/Documentation/git-commit-tree.txt +++ b/Documentation/git-commit-tree.txt @@ -68,7 +68,9 @@ if set: In case (some of) these environment variables are not set, the information is taken from the configuration items user.name and user.email, or, if not -present, system user name and fully qualified hostname. +present, system user name and the hostname used for outgoing mail (taken +from `/etc/mailname` and falling back to the fully qualified hostname when +that file does not exist). A commit comment is read from stdin. If a changelog entry is not provided via "<" redirection, 'git commit-tree' will just wait @@ -90,6 +92,10 @@ Discussion include::i18n.txt[] +FILES +----- +/etc/mailname + SEE ALSO -------- linkgit:git-write-tree[1] diff --git a/Documentation/git-daemon.txt b/Documentation/git-daemon.txt index 69a1e4af9e..31b28fc29f 100644 --- a/Documentation/git-daemon.txt +++ b/Documentation/git-daemon.txt @@ -161,6 +161,16 @@ the facility of inet daemon to achieve the same before spawning repository configuration. By default, all the services are overridable. +--informative-errors:: +--no-informative-errors:: + When informative errors are turned on, git-daemon will report + more verbose errors to the client, differentiating conditions + like "no such repository" from "repository not exported". This + is more convenient for clients, but may leak information about + the existence of unexported repositories. When informative + errors are not enabled, all errors report "access denied" to the + client. The default is --no-informative-errors. + <directory>:: A directory to add to the whitelist of allowed directories. Unless --strict-paths is specified this will also include subdirectories diff --git a/Documentation/git-for-each-ref.txt b/Documentation/git-for-each-ref.txt index 152e695c81..c872b883ba 100644 --- a/Documentation/git-for-each-ref.txt +++ b/Documentation/git-for-each-ref.txt @@ -101,9 +101,10 @@ Fields that have name-email-date tuple as its value (`author`, `committer`, and `tagger`) can be suffixed with `name`, `email`, and `date` to extract the named component. -The first line of the message in a commit and tag object is -`subject`, the remaining lines are `body`. The whole message -is `contents`. +The complete message in a commit and tag object is `contents`. +Its first line is `contents:subject`, the remaining lines +are `contents:body` and the optional GPG signature +is `contents:signature`. For sorting purposes, fields with numeric values sort in numeric order (`objectsize`, `authordate`, `committerdate`, `taggerdate`). diff --git a/Documentation/git-grep.txt b/Documentation/git-grep.txt index e44a4988b7..15d6711d46 100644 --- a/Documentation/git-grep.txt +++ b/Documentation/git-grep.txt @@ -23,7 +23,7 @@ SYNOPSIS [-A <post-context>] [-B <pre-context>] [-C <context>] [-f <file>] [-e] <pattern> [--and|--or|--not|(|)|-e <pattern>...] - [--cached | --no-index | <tree>...] + [ [--exclude-standard] [--cached | --no-index | --untracked] | <tree>...] [--] [<pathspec>...] DESCRIPTION @@ -49,7 +49,20 @@ OPTIONS blobs registered in the index file. --no-index:: - Search files in the current directory, not just those tracked by git. + Search files in the current directory that is not managed by git. + +--untracked:: + In addition to searching in the tracked files in the working + tree, search also in untracked files. + +--no-exclude-standard:: + Also search in ignored files by not honoring the `.gitignore` + mechanism. Only useful with `--untracked`. + +--exclude-standard:: + Do not pay attention to ignored files specified via the `.gitignore` + mechanism. Only useful when searching files in the current directory + with `--no-index`. -a:: --text:: diff --git a/Documentation/git-instaweb.txt b/Documentation/git-instaweb.txt index ea95c90460..f3eef510f2 100644 --- a/Documentation/git-instaweb.txt +++ b/Documentation/git-instaweb.txt @@ -84,6 +84,10 @@ If the configuration variable 'instaweb.browser' is not set, 'web.browser' will be used instead if it is defined. See linkgit:git-web{litdd}browse[1] for more information about this. +SEE ALSO +-------- +linkgit:gitweb[1] + GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-reset.txt b/Documentation/git-reset.txt index b2832fc7eb..b674866e6d 100644 --- a/Documentation/git-reset.txt +++ b/Documentation/git-reset.txt @@ -9,8 +9,8 @@ SYNOPSIS -------- [verse] 'git reset' [-q] [<commit>] [--] <paths>... -'git reset' [--patch|-p] [<commit>] [--] [<paths>...] -'git reset' [--soft | --mixed | --hard | --merge | --keep] [-q] [<commit>] +'git reset' (--patch | -p) [<commit>] [--] [<paths>...] +'git reset' (--soft | --mixed | --hard | --merge | --keep) [-q] [<commit>] DESCRIPTION ----------- @@ -34,7 +34,7 @@ Alternatively, using linkgit:git-checkout[1] and specifying a commit, you can copy the contents of a path out of a commit to the index and to the working tree in one go. -'git reset' --patch|-p [<commit>] [--] [<paths>...]:: +'git reset' (--patch | -p) [<commit>] [--] [<paths>...]:: Interactively select hunks in the difference between the index and <commit> (defaults to HEAD). The chosen hunks are applied in reverse to the index. @@ -43,7 +43,7 @@ This means that `git reset -p` is the opposite of `git add -p`, i.e. you can use it to selectively reset hunks. See the ``Interactive Mode'' section of linkgit:git-add[1] to learn how to operate the `\--patch` mode. -'git reset' [--<mode>] [<commit>]:: +'git reset' --<mode> [<commit>]:: This form resets the current branch head to <commit> and possibly updates the index (resetting it to the tree of <commit>) and the working tree depending on <mode>, which diff --git a/Documentation/git-rev-parse.txt b/Documentation/git-rev-parse.txt index 42c9676eaa..8023dc086d 100644 --- a/Documentation/git-rev-parse.txt +++ b/Documentation/git-rev-parse.txt @@ -180,6 +180,10 @@ print a message to stderr and exit with nonzero status. <args>...:: Flags and parameters to be parsed. +--resolve-git-dir <path>:: + Check if <path> is a valid git-dir or a git-file pointing to a valid + git-dir. If <path> is a valid git-dir the resolved path to git-dir will + be printed. include::revisions.txt[] diff --git a/Documentation/git-revert.txt b/Documentation/git-revert.txt index b311d59c7c..b699a3458e 100644 --- a/Documentation/git-revert.txt +++ b/Documentation/git-revert.txt @@ -9,6 +9,9 @@ SYNOPSIS -------- [verse] 'git revert' [--edit | --no-edit] [-n] [-m parent-number] [-s] <commit>... +'git revert' --continue +'git revert' --quit +'git revert' --abort DESCRIPTION ----------- @@ -91,6 +94,10 @@ effect to your index in a row. Pass the merge strategy-specific option through to the merge strategy. See linkgit:git-merge[1] for details. +SEQUENCER SUBCOMMANDS +--------------------- +include::sequencer.txt[] + EXAMPLES -------- `git revert HEAD~3`:: diff --git a/Documentation/git-submodule.txt b/Documentation/git-submodule.txt index 67cf5f0f8b..6ec3fef079 100644 --- a/Documentation/git-submodule.txt +++ b/Documentation/git-submodule.txt @@ -120,6 +120,8 @@ too (and can also report changes to a submodule's work tree). init:: Initialize the submodules, i.e. register each submodule name and url found in .gitmodules into .git/config. + It will also copy the value of `submodule.$name.update` into + .git/config. The key used in .git/config is `submodule.$name.url`. This command does not alter existing information in .git/config. You can then customize the submodule clone URLs in .git/config @@ -133,7 +135,7 @@ update:: checkout the commit specified in the index of the containing repository. This will make the submodules HEAD be detached unless `--rebase` or `--merge` is specified or the key `submodule.$name.update` is set to - `rebase` or `merge`. + `rebase`, `merge` or `none`. + If the submodule is not yet initialized, and you just want to use the setting as stored in .gitmodules, you can automatically initialize the @@ -141,6 +143,10 @@ submodule with the `--init` option. + If `--recursive` is specified, this command will recurse into the registered submodules, and update any nested submodules within. ++ +If the configuration key `submodule.$name.update` is set to `none` the +submodule with name `$name` will not be updated by default. This can be +overriden by adding `--checkout` to the command. summary:: Show commit summary between the given commit (defaults to HEAD) and diff --git a/Documentation/git-svn.txt b/Documentation/git-svn.txt index f977e8780b..34ee785064 100644 --- a/Documentation/git-svn.txt +++ b/Documentation/git-svn.txt @@ -234,6 +234,14 @@ svn:mergeinfo property in the SVN repository when possible. Currently, this can only be done when dcommitting non-fast-forward merges where all parents but the first have already been pushed into SVN. +--interactive;; + Ask the user to confirm that a patch set should actually be sent to SVN. + For each patch, one may answer "yes" (accept this patch), "no" (discard this + patch), "all" (accept all patches), or "quit". + + + 'git svn dcommit' returns immediately if answer if "no" or "quit", without + commiting anything to SVN. + 'branch':: Create a branch in the SVN repository. diff --git a/Documentation/git-tag.txt b/Documentation/git-tag.txt index fb1c0ac694..c83cb13de6 100644 --- a/Documentation/git-tag.txt +++ b/Documentation/git-tag.txt @@ -43,12 +43,15 @@ GnuPG key for signing. OPTIONS ------- -a:: +--annotate:: Make an unsigned, annotated tag object -s:: +--sign:: Make a GPG-signed tag, using the default e-mail address's key -u <key-id>:: +--local-user=<key-id>:: Make a GPG-signed tag, using the given key -f:: @@ -56,9 +59,11 @@ OPTIONS Replace an existing tag with the given name (instead of failing) -d:: +--delete:: Delete existing tags with the given names. -v:: +--verify:: Verify the gpg signature of the given tag names. -n<num>:: @@ -69,6 +74,7 @@ OPTIONS If the tag is not annotated, the commit message is displayed instead. -l <pattern>:: +--list <pattern>:: List tags with names that match the given pattern (or all if no pattern is given). Running "git tag" without arguments also lists all tags. The pattern is a shell wildcard (i.e., matched @@ -79,6 +85,7 @@ OPTIONS Only list tags which contain the specified commit. -m <msg>:: +--message=<msg>:: Use the given tag message (instead of prompting). If multiple `-m` options are given, their values are concatenated as separate paragraphs. @@ -86,6 +93,7 @@ OPTIONS is given. -F <file>:: +--file=<file>:: Take the tag message from the given file. Use '-' to read the message from the standard input. Implies `-a` if none of `-a`, `-s`, or `-u <key-id>` diff --git a/Documentation/git.txt b/Documentation/git.txt index 5c313e5214..da7d48787e 100644 --- a/Documentation/git.txt +++ b/Documentation/git.txt @@ -44,6 +44,11 @@ unreleased) version of git, that is available from 'master' branch of the `git.git` repository. Documentation for older releases are available here: +* link:v1.7.8/git.html[documentation for release 1.7.8] + +* release notes for + link:RelNotes/1.7.8.txt[1.7.8]. + * link:v1.7.7.5/git.html[documentation for release 1.7.7.5] * release notes for diff --git a/Documentation/gitweb.conf.txt b/Documentation/gitweb.conf.txt new file mode 100644 index 0000000000..7aba497b74 --- /dev/null +++ b/Documentation/gitweb.conf.txt @@ -0,0 +1,889 @@ +gitweb.conf(5) +============== + +NAME +---- +gitweb.conf - Gitweb (git web interface) configuration file + +SYNOPSIS +-------- +/etc/gitweb.conf, /etc/gitweb-common.conf, $GITWEBDIR/gitweb_config.perl + +DESCRIPTION +----------- + +The gitweb CGI script for viewing Git repositories over the web uses a +perl script fragment as its configuration file. You can set variables +using "`our $variable = value`"; text from a "#" character until the +end of a line is ignored. See *perlsyn*(1) for details. + +An example: + + # gitweb configuration file for http://git.example.org + # + our $projectroot = "/srv/git"; # FHS recommendation + our $site_name = 'Example.org >> Repos'; + + +The configuration file is used to override the default settings that +were built into gitweb at the time the 'gitweb.cgi' script was generated. + +While one could just alter the configuration settings in the gitweb +CGI itself, those changes would be lost upon upgrade. Configuration +settings might also be placed into a file in the same directory as the +CGI script with the default name 'gitweb_config.perl' -- allowing +one to have multiple gitweb instances with different configurations by +the use of symlinks. + +Note that some configuration can be controlled on per-repository rather than +gitweb-wide basis: see "Per-repository gitweb configuration" subsection on +linkgit:gitweb[1] manpage. + + +DISCUSSION +---------- +Gitweb reads configuration data from the following sources in the +following order: + + * built-in values (some set during build stage), + + * common system-wide configuration file (defaults to + '/etc/gitweb-common.conf'), + + * either per-instance configuration file (defaults to 'gitweb_config.perl' + in the same directory as the installed gitweb), or if it does not exists + then fallback system-wide configuration file (defaults to '/etc/gitweb.conf'). + +Values obtained in later configuration files override values obtained earlier +in the above sequence. + +Locations of the common system-wide configuration file, the fallback +system-wide configuration file and the per-instance configuration file +are defined at compile time using build-time Makefile configuration +variables, respectively `GITWEB_CONFIG_COMMON`, `GITWEB_CONFIG_SYSTEM` +and `GITWEB_CONFIG`. + +You can also override locations of gitweb configuration files during +runtime by setting the following environment variables: +`GITWEB_CONFIG_COMMON`, `GITWEB_CONFIG_SYSTEM` and `GITWEB_CONFIG` +to a non-empty value. + + +The syntax of the configuration files is that of Perl, since these files are +handled by sourcing them as fragments of Perl code (the language that +gitweb itself is written in). Variables are typically set using the +`our` qualifier (as in "`our $variable = <value>;`") to avoid syntax +errors if a new version of gitweb no longer uses a variable and therefore +stops declaring it. + +You can include other configuration file using read_config_file() +subroutine. For example, one might want to put gitweb configuration +related to access control for viewing repositories via Gitolite (one +of git repository management tools) in a separate file, e.g. in +'/etc/gitweb-gitolite.conf'. To include it, put + +-------------------------------------------------- +read_config_file("/etc/gitweb-gitolite.conf"); +-------------------------------------------------- + +somewhere in gitweb configuration file used, e.g. in per-installation +gitweb configuration file. Note that read_config_file() checks itself +that the file it reads exists, and does nothing if it is not found. +It also handles errors in included file. + + +The default configuration with no configuration file at all may work +perfectly well for some installations. Still, a configuration file is +useful for customizing or tweaking the behavior of gitweb in many ways, and +some optional features will not be present unless explicitly enabled using +the configurable `%features` variable (see also "Configuring gitweb +features" section below). + + +CONFIGURATION VARIABLES +----------------------- +Some configuration variables have their default values (embedded in the CGI +script) set during building gitweb -- if that is the case, this fact is put +in their description. See gitweb's 'INSTALL' file for instructions on building +and installing gitweb. + + +Location of repositories +~~~~~~~~~~~~~~~~~~~~~~~~ +The configuration variables described below control how gitweb finds +git repositories, and how repositories are displayed and accessed. + +See also "Repositories" and later subsections in linkgit:gitweb[1] manpage. + +$projectroot:: + Absolute filesystem path which will be prepended to project path; + the path to repository is `$projectroot/$project`. Set to + `$GITWEB_PROJECTROOT` during installation. This variable has to be + set correctly for gitweb to find repositories. ++ +For example, if `$projectroot` is set to "/srv/git" by putting the following +in gitweb config file: ++ +---------------------------------------------------------------------------- +our $projectroot = "/srv/git"; +---------------------------------------------------------------------------- ++ +then ++ +------------------------------------------------ +http://git.example.com/gitweb.cgi?p=foo/bar.git +------------------------------------------------ ++ +and its path_info based equivalent ++ +------------------------------------------------ +http://git.example.com/gitweb.cgi/foo/bar.git +------------------------------------------------ ++ +will map to the path '/srv/git/foo/bar.git' on the filesystem. + +$projects_list:: + Name of a plain text file listing projects, or a name of directory + to be scanned for projects. ++ +Project list files should list one project per line, with each line +having the following format ++ +----------------------------------------------------------------------------- +<URI-encoded filesystem path to repository> SP <URI-encoded repository owner> +----------------------------------------------------------------------------- ++ +The default value of this variable is determined by the `GITWEB_LIST` +makefile variable at installation time. If this variable is empty, gitweb +will fall back to scanning the `$projectroot` directory for repositories. + +$project_maxdepth:: + If `$projects_list` variable is unset, gitweb will recursively + scan filesystem for git repositories. The `$project_maxdepth` + is used to limit traversing depth, relative to `$projectroot` + (starting point); it means that directories which are further + from `$projectroot` than `$project_maxdepth` will be skipped. ++ +It is purely performance optimization, originally intended for MacOS X, +where recursive directory traversal is slow. Gitweb follows symbolic +links, but it detects cycles, ignoring any duplicate files and directories. ++ +The default value of this variable is determined by the build-time +configuration variable `GITWEB_PROJECT_MAXDEPTH`, which defaults to +2007. + +$export_ok:: + Show repository only if this file exists (in repository). Only + effective if this variable evaluates to true. Can be set when + building gitweb by setting `GITWEB_EXPORT_OK`. This path is + relative to `GIT_DIR`. git-daemon[1] uses 'git-daemon-export-ok', + unless started with `--export-all`. By default this variable is + not set, which means that this feature is turned off. + +$export_auth_hook:: + Function used to determine which repositories should be shown. + This subroutine should take one parameter, the full path to + a project, and if it returns true, that project will be included + in the projects list and can be accessed through gitweb as long + as it fulfills the other requirements described by $export_ok, + $projects_list, and $projects_maxdepth. Example: ++ +---------------------------------------------------------------------------- +our $export_auth_hook = sub { return -e "$_[0]/git-daemon-export-ok"; }; +---------------------------------------------------------------------------- ++ +though the above might be done by using `$export_ok` instead ++ +---------------------------------------------------------------------------- +our $export_ok = "git-daemon-export-ok"; +---------------------------------------------------------------------------- ++ +If not set (default), it means that this feature is disabled. ++ +See also more involved example in "Controlling access to git repositories" +subsection on linkgit:gitweb[1] manpage. + +$strict_export:: + Only allow viewing of repositories also shown on the overview page. + This for example makes `$gitweb_export_ok` file decide if repository is + available and not only if it is shown. If `$gitweb_list` points to + file with list of project, only those repositories listed would be + available for gitweb. Can be set during building gitweb via + `GITWEB_STRICT_EXPORT`. By default this variable is not set, which + means that you can directly access those repositories that are hidden + from projects list page (e.g. the are not listed in the $projects_list + file). + + +Finding files +~~~~~~~~~~~~~ +The following configuration variables tell gitweb where to find files. +The values of these variables are paths on the filesystem. + +$GIT:: + Core git executable to use. By default set to `$GIT_BINDIR/git`, which + in turn is by default set to `$(bindir)/git`. If you use git installed + from a binary package, you should usually set this to "/usr/bin/git". + This can just be "git" if your web server has a sensible PATH; from + security point of view it is better to use absolute path to git binary. + If you have multiple git versions installed it can be used to choose + which one to use. Must be (correctly) set for gitweb to be able to + work. + +$mimetypes_file:: + File to use for (filename extension based) guessing of MIME types before + trying '/etc/mime.types'. *NOTE* that this path, if relative, is taken + as relative to the current git repository, not to CGI script. If unset, + only '/etc/mime.types' is used (if present on filesystem). If no mimetypes + file is found, mimetype guessing based on extension of file is disabled. + Unset by default. + +$highlight_bin:: + Path to the highlight executable to use (it must be the one from + http://www.andre-simon.de[] due to assumptions about parameters and output). + By default set to 'highlight'; set it to full path to highlight + executable if it is not installed on your web server's PATH. + Note that 'highlight' feature must be set for gitweb to actually + use syntax hightlighting. ++ +*NOTE*: if you want to add support for new file type (supported by +"highlight" but not used by gitweb), you need to modify `%highlight_ext` +or `%highlight_basename`, depending on whether you detect type of file +based on extension (for example "sh") or on its basename (for example +"Makefile"). The keys of these hashes are extension and basename, +respectively, and value for given key is name of syntax to be passed via +`--syntax <syntax>` to highlighter. ++ +For example if repositories you are hosting use "phtml" extension for +PHP files, and you want to have correct syntax-highlighting for those +files, you can add the following to gitweb configuration: ++ +--------------------------------------------------------- +our %highlight_ext; +$highlight_ext{'phtml'} = 'php'; +--------------------------------------------------------- + + +Links and their targets +~~~~~~~~~~~~~~~~~~~~~~~ +The configuration variables described below configure some of gitweb links: +their target and their look (text or image), and where to find page +prerequisites (stylesheet, favicon, images, scripts). Usually they are left +at their default values, with the possible exception of `@stylesheets` +variable. + +@stylesheets:: + List of URIs of stylesheets (relative to the base URI of a page). You + might specify more than one stylesheet, for example to use "gitweb.css" + as base with site specific modifications in a separate stylesheet + to make it easier to upgrade gitweb. For example, you can add + a `site` stylesheet by putting ++ +---------------------------------------------------------------------------- +push @stylesheets, "gitweb-site.css"; +---------------------------------------------------------------------------- ++ +in the gitweb config file. Those values that are relative paths are +relative to base URI of gitweb. ++ +This list should contain the URI of gitweb's standard stylesheet. The default +URI of gitweb stylesheet can be set at build time using the `GITWEB_CSS` +makefile variable. Its default value is 'static/gitweb.css' +(or 'static/gitweb.min.css' if the `CSSMIN` variable is defined, +i.e. if CSS minifier is used during build). ++ +*Note*: there is also a legacy `$stylesheet` configuration variable, which was +used by older gitweb. If `$stylesheet` variable is defined, only CSS stylesheet +given by this variable is used by gitweb. + +$logo:: + Points to the location where you put 'git-logo.png' on your web + server, or to be more the generic URI of logo, 72x27 size). This image + is displayed in the top right corner of each gitweb page and used as + a logo for the Atom feed. Relative to the base URI of gitweb (as a path). + Can be adjusted when building gitweb using `GITWEB_LOGO` variable + By default set to 'static/git-logo.png'. + +$favicon:: + Points to the location where you put 'git-favicon.png' on your web + server, or to be more the generic URI of favicon, which will be served + as "image/png" type. Web browsers that support favicons (website icons) + may display them in the browser's URL bar and next to the site name in + bookmarks. Relative to the base URI of gitweb. Can be adjusted at + build time using `GITWEB_FAVICON` variable. + By default set to 'static/git-favicon.png'. + +$javascript:: + Points to the location where you put 'gitweb.js' on your web server, + or to be more generic the URI of JavaScript code used by gitweb. + Relative to the base URI of gitweb. Can be set at build time using + the `GITWEB_JS` build-time configuration variable. ++ +The default value is either 'static/gitweb.js', or 'static/gitweb.min.js' if +the `JSMIN` build variable was defined, i.e. if JavaScript minifier was used +at build time. *Note* that this single file is generated from multiple +individual JavaScript "modules". + +$home_link:: + Target of the home link on the top of all pages (the first part of view + "breadcrumbs"). By default it is set to the absolute URI of a current page + (to the value of `$my_uri` variable, or to "/" if `$my_uri` is undefined + or is an empty string). + +$home_link_str:: + Label for the "home link" at the top of all pages, leading to `$home_link` + (usually the main gitweb page, which contains the projects list). It is + used as the first component of gitweb's "breadcrumb trail": + `<home link> / <project> / <action>`. Can be set at build time using + the `GITWEB_HOME_LINK_STR` variable. By default it is set to "projects", + as this link leads to the list of projects. Other popular choice it to + set it to the name of site. + +$logo_url:: +$logo_label:: + URI and label (title) for the Git logo link (or your site logo, + if you chose to use different logo image). By default, these both + refer to git homepage, http://git-scm.com[]; in the past, they pointed + to git documentation at http://www.kernel.org[]. + + +Changing gitweb's look +~~~~~~~~~~~~~~~~~~~~~~ +You can adjust how pages generated by gitweb look using the variables described +below. You can change the site name, add common headers and footers for all +pages, and add a description of this gitweb installation on its main page +(which is the projects list page), etc. + +$site_name:: + Name of your site or organization, to appear in page titles. Set it + to something descriptive for clearer bookmarks etc. If this variable + is not set or is, then gitweb uses the value of the `SERVER_NAME` + CGI environment variable, setting site name to "$SERVER_NAME Git", + or "Untitled Git" if this variable is not set (e.g. if running gitweb + as standalone script). ++ +Can be set using the `GITWEB_SITENAME` at build time. Unset by default. + +$site_html_head_string:: + HTML snippet to be included in the <head> section of each page. + Can be set using `GITWEB_SITE_HTML_HEAD_STRING` at build time. + No default value. + +$site_header:: + Name of a file with HTML to be included at the top of each page. + Relative to the directory containing the 'gitweb.cgi' script. + Can be set using `GITWEB_SITE_HEADER` at build time. No default + value. + +$site_footer:: + Name of a file with HTML to be included at the bottom of each page. + Relative to the directory containing the 'gitweb.cgi' script. + Can be set using `GITWEB_SITE_FOOTER` at build time. No default + value. + +$home_text:: + Name of a HTML file which, if it exists, is included on the + gitweb projects overview page ("projects_list" view). Relative to + the directory containing the gitweb.cgi script. Default value + can be adjusted during build time using `GITWEB_HOMETEXT` variable. + By default set to 'indextext.html'. + +$projects_list_description_width:: + The width (in characters) of the "Description" column of the projects list. + Longer descriptions will be truncated (trying to cut at word boundary); + the full description is available in the 'title' attribute (usually shown on + mouseover). The default is 25, which might be too small if you + use long project descriptions. + +$default_projects_order:: + Default value of ordering of projects on projects list page, which + means the ordering used if you don't explicitly sort projects list + (if there is no "o" CGI query parameter in the URL). Valid values + are "none" (unsorted), "project" (projects are by project name, + i.e. path to repository relative to `$projectroot`), "descr" + (project description), "owner", and "age" (by date of most current + commit). ++ +Default value is "project". Unknown value means unsorted. + + +Changing gitweb's behavior +~~~~~~~~~~~~~~~~~~~~~~~~~~ +These configuration variables control _internal_ gitweb behavior. + +$default_blob_plain_mimetype:: + Default mimetype for the blob_plain (raw) view, if mimetype checking + doesn't result in some other type; by default "text/plain". + Gitweb guesses mimetype of a file to display based on extension + of its filename, using `$mimetypes_file` (if set and file exists) + and '/etc/mime.types' files (see *mime.types*(5) manpage; only + filename extension rules are supported by gitweb). + +$default_text_plain_charset:: + Default charset for text files. If this is not set, the web server + configuration will be used. Unset by default. + +$fallback_encoding:: + Gitweb assumes this charset when a line contains non-UTF-8 characters. + The fallback decoding is used without error checking, so it can be even + "utf-8". The value must be a valid encoding; see the *Encoding::Supported*(3pm) + man page for a list. The default is "latin1", aka. "iso-8859-1". + +@diff_opts:: + Rename detection options for git-diff and git-diff-tree. The default is + (\'-M'); set it to (\'-C') or (\'-C', \'-C') to also detect copies, + or set it to () i.e. empty list if you don't want to have renames + detection. ++ +*Note* that rename and especially copy detection can be quite +CPU-intensive. Note also that non git tools can have problems with +patches generated with options mentioned above, especially when they +involve file copies (\'-C') or criss-cross renames (\'-B'). + + +Some optional features and policies +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +Most of features are configured via `%feature` hash; however some of extra +gitweb features can be turned on and configured using variables described +below. This list beside configuration variables that control how gitweb +looks does contain variables configuring administrative side of gitweb +(e.g. cross-site scripting prevention; admittedly this as side effect +affects how "summary" pages look like, or load limiting). + +@git_base_url_list:: + List of git base URLs. These URLs are used to generate URLs + describing from where to fetch a project, which are shown on + project summary page. The full fetch URL is "`$git_base_url/$project`", + for each element of this list. You can set up multiple base URLs + (for example one for `git://` protocol, and one for `http://` + protocol). ++ +Note that per repository configuration can be set in '$GIT_DIR/cloneurl' +file, or as values of multi-value `gitweb.url` configuration variable in +project config. Per-repository configuration takes precedence over value +composed from `@git_base_url_list` elements and project name. ++ +You can setup one single value (single entry/item in this list) at build +time by setting the `GITWEB_BASE_URL` built-time configuration variable. +By default it is set to (), i.e. an empty list. This means that gitweb +would not try to create project URL (to fetch) from project name. + +$projects_list_group_categories:: + Whether to enables the grouping of projects by category on the project + list page. The category of a project is determined by the + `$GIT_DIR/category` file or the `gitweb.category` variable in each + repository's configuration. Disabled by default (set to 0). + +$project_list_default_category:: + Default category for projects for which none is specified. If this is + set to the empty string, such projects will remain uncategorized and + listed at the top, above categorized projects. Used only if project + categories are enabled, which means if `$projects_list_group_categories` + is true. By default set to "" (empty string). + +$prevent_xss:: + If true, some gitweb features are disabled to prevent content in + repositories from launching cross-site scripting (XSS) attacks. Set this + to true if you don't trust the content of your repositories. + False by default (set to 0). + +$maxload:: + Used to set the maximum load that we will still respond to gitweb queries. + If the server load exceeds this value then gitweb will return + "503 Service Unavailable" error. The server load is taken to be 0 + if gitweb cannot determine its value. Currently it works only on Linux, + where it uses '/proc/loadavg'; the load there is the number of active + tasks on the system -- processes that are actually running -- averaged + over the last minute. ++ +Set `$maxload` to undefined value (`undef`) to turn this feature off. +The default value is 300. + +$per_request_config:: + If this is set to code reference, it will be run once for each request. + You can set parts of configuration that change per session this way. + For example, one might use the following code in a gitweb configuration + file ++ +-------------------------------------------------------------------------------- +our $per_request_config = sub { + $ENV{GL_USER} = $cgi->remote_user || "gitweb"; +}; +-------------------------------------------------------------------------------- ++ +If `$per_request_config` is not a code reference, it is interpreted as boolean +value. If it is true gitweb will process config files once per request, +and if it is false gitweb will process config files only once, each time it +is executed. True by default (set to 1). ++ +*NOTE*: `$my_url`, `$my_uri`, and `$base_url` are overwritten with their default +values before every request, so if you want to change them, be sure to set +this variable to true or a code reference effecting the desired changes. ++ +This variable matters only when using persistent web environments that +serve multiple requests using single gitweb instance, like mod_perl, +FastCGI or Plackup. + + +Other variables +~~~~~~~~~~~~~~~ +Usually you should not need to change (adjust) any of configuration +variables described below; they should be automatically set by gitweb to +correct value. + + +$version:: + Gitweb version, set automatically when creating gitweb.cgi from + gitweb.perl. You might want to modify it if you are running modified + gitweb, for example ++ +--------------------------------------------------- +our $version .= " with caching"; +--------------------------------------------------- ++ +if you run modified version of gitweb with caching support. This variable +is purely informational, used e.g. in the "generator" meta header in HTML +header. + +$my_url:: +$my_uri:: + Full URL and absolute URL of the gitweb script; + in earlier versions of gitweb you might have need to set those + variables, but now there should be no need to do it. See + `$per_request_config` if you need to set them still. + +$base_url:: + Base URL for relative URLs in pages generated by gitweb, + (e.g. `$logo`, `$favicon`, `@stylesheets` if they are relative URLs), + needed and used '<base href="$base_url">' only for URLs with nonempty + PATH_INFO. Usually gitweb sets its value correctly, + and there is no need to set this variable, e.g. to $my_uri or "/". + See `$per_request_config` if you need to override it anyway. + + +CONFIGURING GITWEB FEATURES +--------------------------- +Many gitweb features can be enabled (or disabled) and configured using the +`%feature` hash. Names of gitweb features are keys of this hash. + +Each `%feature` hash element is a hash reference and has the following +structure: +---------------------------------------------------------------------- +"<feature_name>" => { + "sub" => <feature-sub (subroutine)>, + "override" => <allow-override (boolean)>, + "default" => [ <options>... ] +}, +---------------------------------------------------------------------- +Some features cannot be overridden per project. For those +features the structure of appropriate `%feature` hash element has a simpler +form: +---------------------------------------------------------------------- +"<feature_name>" => { + "override" => 0, + "default" => [ <options>... ] +}, +---------------------------------------------------------------------- +As one can see it lacks the \'sub' element. + +The meaning of each part of feature configuration is described +below: + +default:: + List (array reference) of feature parameters (if there are any), + used also to toggle (enable or disable) given feature. ++ +Note that it is currently *always* an array reference, even if +feature doesn't accept any configuration parameters, and \'default' +is used only to turn it on or off. In such case you turn feature on +by setting this element to `[1]`, and torn it off by setting it to +`[0]`. See also the passage about the "blame" feature in the "Examples" +section. ++ +To disable features that accept parameters (are configurable), you +need to set this element to empty list i.e. `[]`. + +override:: + If this field has a true value then the given feature is + overriddable, which means that it can be configured + (or enabled/disabled) on a per-repository basis. ++ +Usually given "<feature>" is configurable via the `gitweb.<feature>` +config variable in the per-repository git configuration file. ++ +*Note* that no feature is overriddable by default. + +sub:: + Internal detail of implementation. What is important is that + if this field is not present then per-repository override for + given feature is not supported. ++ +You wouldn't need to ever change it in gitweb config file. + + +Features in `%feature` +~~~~~~~~~~~~~~~~~~~~~~ +The gitweb features that are configurable via `%feature` hash are listed +below. This should be a complete list, but ultimately the authoritative +and complete list is in gitweb.cgi source code, with features described +in the comments. + +blame:: + Enable the "blame" and "blame_incremental" blob views, showing for + each line the last commit that modified it; see linkgit:git-blame[1]. + This can be very CPU-intensive and is therefore disabled by default. ++ +This feature can be configured on a per-repository basis via +repository's `gitweb.blame` configuration variable (boolean). + +snapshot:: + Enable and configure the "snapshot" action, which allows user to + download a compressed archive of any tree or commit, as produced + by linkgit:git-archive[1] and possibly additionally compressed. + This can potentially generate high traffic if you have large project. ++ +The value of \'default' is a list of names of snapshot formats, +defined in `%known_snapshot_formats` hash, that you wish to offer. +Supported formats include "tgz", "tbz2", "txz" (gzip/bzip2/xz +compressed tar archive) and "zip"; please consult gitweb sources for +a definitive list. By default only "tgz" is offered. ++ +This feature can be configured on a per-repository basis via +repository's `gitweb.blame` configuration variable, which contains +a comma separated list of formats or "none" to disable snapshots. +Unknown values are ignored. + +grep:: + Enable grep search, which lists the files in currently selected + tree (directory) containing the given string; see linkgit:git-grep[1]. + This can be potentially CPU-intensive, of course. Enabled by default. ++ +This feature can be configured on a per-repository basis via +repository's `gitweb.grep` configuration variable (boolean). + +pickaxe:: + Enable the so called pickaxe search, which will list the commits + that introduced or removed a given string in a file. This can be + practical and quite faster alternative to "blame" action, but it is + still potentially CPU-intensive. Enabled by default. ++ +The pickaxe search is described in linkgit:git-log[1] (the +description of `-S<string>` option, which refers to pickaxe entry in +linkgit:gitdiffcore[7] for more details). ++ +This feature can be configured on a per-repository basis by setting +repository's `gitweb.pickaxe` configuration variable (boolean). + +show-sizes:: + Enable showing size of blobs (ordinary files) in a "tree" view, in a + separate column, similar to what `ls -l` does; see description of + `-l` option in linkgit:git-ls-tree[1] manpage. This costs a bit of + I/O. Enabled by default. ++ +This feature can be configured on a per-repository basis via +repository's `gitweb.showsizes` configuration variable (boolean). + +patches:: + Enable and configure "patches" view, which displays list of commits in email + (plain text) output format; see also linkgit:git-format-patch[1]. + The value is the maximum number of patches in a patchset generated + in "patches" view. Set the 'default' field to a list containing single + item of or to an empty list to disable patch view, or to a list + containing a single negative number to remove any limit. + Default value is 16. ++ +This feature can be configured on a per-repository basis via +repository's `gitweb.patches` configuration variable (integer). + +avatar:: + Avatar support. When this feature is enabled, views such as + "shortlog" or "commit" will display an avatar associated with + the email of each committer and author. ++ +Currently available providers are *"gravatar"* and *"picon"*. +Only one provider at a time can be selected ('default' is one element list). +If an unknown provider is specified, the feature is disabled. +*Note* that some providers might require extra Perl packages to be +installed; see 'gitweb/INSTALL' for more details. ++ +This feature can be configured on a per-repository basis via +repository's `gitweb.avatar` configuration variable. ++ +See also `%avatar_size` with pixel sizes for icons and avatars +("default" is used for one-line like "log" and "shortlog", "double" +is used for two-line like "commit", "commitdiff" or "tag"). If the +default font sizes or lineheights are changed (e.g. via adding extra +CSS stylesheet in `@stylesheets`), it may be appropriate to change +these values. + +highlight:: + Server-side syntax highlight support in "blob" view. It requires + `$highlight_bin` program to be available (see the description of + this variable in the "Configuration variables" section above), + and therefore is disabled by default. ++ +This feature can be configured on a per-repository basis via +repository's `gitweb.highlight` configuration variable (boolean). + +remote_heads:: + Enable displaying remote heads (remote-tracking branches) in the "heads" + list. In most cases the list of remote-tracking branches is an + unnecessary internal private detail, and this feature is therefore + disabled by default. linkgit:git-instaweb[1], which is usually used + to browse local repositories, enables and uses this feature. ++ +This feature can be configured on a per-repository basis via +repository's `gitweb.remote_heads` configuration variable (boolean). + + +The remaining features cannot be overridden on a per project basis. + +search:: + Enable text search, which will list the commits which match author, + committer or commit text to a given string; see the description of + `--author`, `--committer` and `--grep` options in linkgit:git-log[1] + manpage. Enabled by default. ++ +Project specific override is not supported. + +forks:: + If this feature is enabled, gitweb considers projects in + subdirectories of project root (basename) to be forks of existing + projects. For each project `$projname.git`, projects in the + `$projname/` directory and its subdirectories will not be + shown in the main projects list. Instead, a \'+' mark is shown + next to `$projname`, which links to a "forks" view that lists all + the forks (all projects in `$projname/` subdirectory). Additionally + a "forks" view for a project is linked from project summary page. ++ +If the project list is taken from a file (`$projects_list` points to a +file), forks are only recognized if they are listed after the main project +in that file. ++ +Project specific override is not supported. + +actions:: + Insert custom links to the action bar of all project pages. This + allows you to link to third-party scripts integrating into gitweb. ++ +The "default" value consists of a list of triplets in the form +`("<label>", "<link>", "<position>")` where "position" is the label +after which to insert the link, "link" is a format string where `%n` +expands to the project name, `%f` to the project path within the +filesystem (i.e. "$projectroot/$project"), `%h` to the current hash +(\'h' gitweb parameter) and `%b` to the current hash base +(\'hb' gitweb parameter); `%%` expands to \'%'. ++ +For example, at the time this page was written, the http://repo.or.cz[] +git hosting site set it to the following to enable graphical log +(using the third party tool *git-browser*): ++ +---------------------------------------------------------------------- +$feature{'actions'}{'default'} = + [ ('graphiclog', '/git-browser/by-commit.html?r=%n', 'summary')]; +---------------------------------------------------------------------- ++ +This adds a link titled "graphiclog" after the "summary" link, leading to +`git-browser` script, passing `r=<project>` as a query parameter. ++ +Project specific override is not supported. + +timed:: + Enable displaying how much time and how many git commands it took to + generate and display each page in the page footer (at the bottom of + page). For example the footer might contain: "This page took 6.53325 + seconds and 13 git commands to generate." Disabled by default. ++ +Project specific override is not supported. + +javascript-timezone:: + Enable and configure the ability to change a common timezone for dates + in gitweb output via JavaScript. Dates in gitweb output include + authordate and committerdate in "commit", "commitdiff" and "log" + views, and taggerdate in "tag" view. Enabled by default. ++ +The value is a list of three values: a default timezone (for if the client +hasn't selected some other timezone and saved it in a cookie), a name of cookie +where to store selected timezone, and a CSS class used to mark up +dates for manipulation. If you want to turn this feature off, set "default" +to empty list: `[]`. ++ +Typical gitweb config files will only change starting (default) timezone, +and leave other elements at their default values: ++ +--------------------------------------------------------------------------- +$feature{'javascript-timezone'}{'default'}[0] = "utc"; +--------------------------------------------------------------------------- ++ +The example configuration presented here is guaranteed to be backwards +and forward compatible. ++ +Timezone values can be "local" (for local timezone that browser uses), "utc" +(what gitweb uses when JavaScript or this feature is disabled), or numerical +timezones in the form of "+/-HHMM", such as "+0200". ++ +Project specific override is not supported. + + +EXAMPLES +-------- + +To enable blame, pickaxe search, and snapshot support (allowing "tar.gz" and +"zip" snapshots), while allowing individual projects to turn them off, put +the following in your GITWEB_CONFIG file: + + $feature{'blame'}{'default'} = [1]; + $feature{'blame'}{'override'} = 1; + + $feature{'pickaxe'}{'default'} = [1]; + $feature{'pickaxe'}{'override'} = 1; + + $feature{'snapshot'}{'default'} = ['zip', 'tgz']; + $feature{'snapshot'}{'override'} = 1; + +If you allow overriding for the snapshot feature, you can specify which +snapshot formats are globally disabled. You can also add any command line +options you want (such as setting the compression level). For instance, you +can disable Zip compressed snapshots and set *gzip*(1) to run at level 6 by +adding the following lines to your gitweb configuration file: + + $known_snapshot_formats{'zip'}{'disabled'} = 1; + $known_snapshot_formats{'tgz'}{'compressor'} = ['gzip','-6']; + +ENVIRONMENT +----------- +The location of per-instance and system-wide configuration files can be +overridden using the following environment variables: + +GITWEB_CONFIG:: + Sets location of per-instance configuration file. +GITWEB_CONFIG_SYSTEM:: + Sets location of fallback system-wide configuration file. + This file is read only if per-instance one does not exist. +GITWEB_CONFIG_COMMON:: + Sets location of common system-wide configuration file. + + +FILES +----- +gitweb_config.perl:: + This is default name of per-instance configuration file. The + format of this file is described above. +/etc/gitweb.conf:: + This is default name of fallback system-wide configuration + file. This file is used only if per-instance configuration + variable is not found. +/etc/gitweb-common.conf:: + This is default name of common system-wide configuration + file. + + +SEE ALSO +-------- +linkgit:gitweb[1], linkgit:git-instaweb[1] + +'gitweb/README', 'gitweb/INSTALL' + +GIT +--- +Part of the linkgit:git[1] suite diff --git a/Documentation/gitweb.txt b/Documentation/gitweb.txt new file mode 100644 index 0000000000..605a085326 --- /dev/null +++ b/Documentation/gitweb.txt @@ -0,0 +1,704 @@ +gitweb(1) +========= + +NAME +---- +gitweb - Git web interface (web frontend to Git repositories) + +SYNOPSIS +-------- +To get started with gitweb, run linkgit:git-instaweb[1] from a git repository. +This would configure and start your web server, and run web browser pointing to +gitweb. + + +DESCRIPTION +----------- +Gitweb provides a web interface to git repositories. It's features include: + +* Viewing multiple Git repositories with common root. +* Browsing every revision of the repository. +* Viewing the contents of files in the repository at any revision. +* Viewing the revision log of branches, history of files and directories, + see what was changed when, by who. +* Viewing the blame/annotation details of any file (if enabled). +* Generating RSS and Atom feeds of commits, for any branch. + The feeds are auto-discoverable in modern web browsers. +* Viewing everything that was changed in a revision, and step through + revisions one at a time, viewing the history of the repository. +* Finding commits which commit messages matches given search term. + +See http://git.kernel.org/?p=git/git.git;a=tree;f=gitweb[] or +http://repo.or.cz/w/git.git/tree/HEAD:/gitweb/[] for gitweb source code, +browsed using gitweb itself. + + +CONFIGURATION +------------- +Various aspects of gitweb's behavior can be controlled through the configuration +file 'gitweb_config.perl' or '/etc/gitweb.conf'. See the linkgit:gitweb.conf[5] +for details. + +Repositories +~~~~~~~~~~~~ +Gitweb can show information from one or more Git repositories. These +repositories have to be all on local filesystem, and have to share common +repository root, i.e. be all under a single parent repository (but see also +"Advanced web server setup" section, "Webserver configuration with multiple +projects' root" subsection). + +----------------------------------------------------------------------- +our $projectroot = '/path/to/parent/directory'; +----------------------------------------------------------------------- + +The default value for `$projectroot` is '/pub/git'. You can change it during +building gitweb via `GITWEB_PROJECTROOT` build configuration variable. + +By default all git repositories under `$projectroot` are visible and available +to gitweb. The list of projects is generated by default by scanning the +`$projectroot` directory for git repositories (for object databases to be +more exact; gitweb is not interested in a working area, and is best suited +to showing "bare" repositories). + +The name of repository in gitweb is path to it's `$GIT_DIR` (it's object +database) relative to `$projectroot`. Therefore the repository $repo can be +found at "$projectroot/$repo". + + +Projects list file format +~~~~~~~~~~~~~~~~~~~~~~~~~ +Instead of having gitweb find repositories by scanning filesystem +starting from $projectroot, you can provide a pre-generated list of +visible projects by setting `$projects_list` to point to a plain text +file with a list of projects (with some additional info). + +This file uses the following format: + +* One record (for project / repository) per line; does not support line +continuation (newline escaping). + +* Leading and trailing whitespace are ignored. + +* Whitespace separated fields; any run of whitespace can be used as field +separator (rules for Perl's "`split(" ", $line)`"). + +* Fields use modified URI encoding, defined in RFC 3986, section 2.1 +(Percent-Encoding), or rather "Query string encoding" (see +link:http://en.wikipedia.org/wiki/Query_string#URL_encoding[]), the difference +being that SP (" ") can be encoded as "{plus}" (and therefore "{plus}" has to be +also percent-encoded). ++ +Reserved characters are: "%" (used for encoding), "{plus}" (can be used to +encode SPACE), all whitespace characters as defined in Perl, including SP, +TAB and LF, (used to separate fields in a record). + +* Currently recognized fields are: +<repository path>:: + path to repository GIT_DIR, relative to `$projectroot` +<repository owner>:: + displayed as repository owner, preferably full name, or email, + or both + +You can generate the projects list index file using the project_index action +(the 'TXT' link on projects list page) directly from gitweb; see also +"Generating projects list using gitweb" section below. + +Example contents: +----------------------------------------------------------------------- +foo.git Joe+R+Hacker+<joe@example.com> +foo/bar.git O+W+Ner+<owner@example.org> +----------------------------------------------------------------------- + + +By default this file controls only which projects are *visible* on projects +list page (note that entries that do not point to correctly recognized git +repositories won't be displayed by gitweb). Even if a project is not +visible on projects list page, you can view it nevertheless by hand-crafting +a gitweb URL. By setting `$strict_export` configuration variable (see +linkgit:gitweb.conf[5]) to true value you can allow viewing only of +repositories also shown on the overview page (i.e. only projects explicitly +listed in projects list file will be accessible). + + +Generating projects list using gitweb +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +We assume that GITWEB_CONFIG has its default Makefile value, namely +'gitweb_config.perl'. Put the following in 'gitweb_make_index.perl' file: +---------------------------------------------------------------------------- +read_config_file("gitweb_config.perl"); +$projects_list = $projectroot; +---------------------------------------------------------------------------- + +Then create the following script to get list of project in the format +suitable for GITWEB_LIST build configuration variable (or +`$projects_list` variable in gitweb config): + +---------------------------------------------------------------------------- +#!/bin/sh + +export GITWEB_CONFIG="gitweb_make_index.perl" +export GATEWAY_INTERFACE="CGI/1.1" +export HTTP_ACCEPT="*/*" +export REQUEST_METHOD="GET" +export QUERY_STRING="a=project_index" + +perl -- /var/www/cgi-bin/gitweb.cgi +---------------------------------------------------------------------------- + +Run this script and save its output to a file. This file could then be used +as projects list file, which means that you can set `$projects_list` to its +filename. + + +Controlling access to git repositories +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +By default all git repositories under `$projectroot` are visible and +available to gitweb. You can however configure how gitweb controls access +to repositories. + +* As described in "Projects list file format" section, you can control which +projects are *visible* by selectively including repositories in projects +list file, and setting `$projects_list` gitweb configuration variable to +point to it. With `$strict_export` set, projects list file can be used to +control which repositories are *available* as well. + +* You can configure gitweb to only list and allow viewing of the explicitly +exported repositories, via `$export_ok` variable in gitweb config file; see +linkgit:gitweb.conf[5] manpage. If it evaluates to true, gitweb shows +repositories only if this file named by `$export_ok` exists in its object +database (if directory has the magic file named `$export_ok`). ++ +For example linkgit:git-daemon[1] by default (unless `--export-all` option +is used) allows pulling only for those repositories that have +'git-daemon-export-ok' file. Adding ++ +-------------------------------------------------------------------------- +our $export_ok = "git-daemon-export-ok"; +-------------------------------------------------------------------------- ++ +makes gitweb show and allow access only to those repositories that can be +fetched from via `git://` protocol. + +* Finally, it is possible to specify an arbitrary perl subroutine that will +be called for each repository to determine if it can be exported. The +subroutine receives an absolute path to the project (repository) as its only +parameter (i.e. "$projectroot/$project"). ++ +For example, if you use mod_perl to run the script, and have dumb +HTTP protocol authentication configured for your repositories, you +can use the following hook to allow access only if the user is +authorized to read the files: ++ +-------------------------------------------------------------------------- +$export_auth_hook = sub { + use Apache2::SubRequest (); + use Apache2::Const -compile => qw(HTTP_OK); + my $path = "$_[0]/HEAD"; + my $r = Apache2::RequestUtil->request; + my $sub = $r->lookup_file($path); + return $sub->filename eq $path + && $sub->status == Apache2::Const::HTTP_OK; +}; +-------------------------------------------------------------------------- + + +Per-repository gitweb configuration +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +You can configure individual repositories shown in gitweb by creating file +in the 'GIT_DIR' of git repository, or by setting some repo configuration +variable (in 'GIT_DIR/config', see linkgit:git-config[1]). + +You can use the following files in repository: + +README.html:: + A html file (HTML fragment) which is included on the gitweb project + "summary" page inside `<div>` block element. You can use it for longer + description of a project, to provide links (for example to project's + homepage), etc. This is recognized only if XSS prevention is off + (`$prevent_xss` is false, see linkgit:gitweb.conf[5]); a way to include + a README safely when XSS prevention is on may be worked out in the + future. + +description (or `gitweb.description`):: + Short (shortened to `$projects_list_description_width` in the projects + list page, which is 25 characters by default; see + linkgit:gitweb.conf[5]) single line description of a project (of a + repository). Plain text file; HTML will be escaped. By default set to ++ +------------------------------------------------------------------------------- +Unnamed repository; edit this file to name it for gitweb. +------------------------------------------------------------------------------- ++ +from the template during repository creation, usually installed in +'/usr/share/git-core/templates/'. You can use the `gitweb.description` repo +configuration variable, but the file takes precedence. + +category (or `gitweb.category`):: + Singe line category of a project, used to group projects if + `$projects_list_group_categories` is enabled. By default (file and + configuration variable absent), uncategorized projects are put in the + `$project_list_default_category` category. You can use the + `gitweb.category` repo configuration variable, but the file takes + precedence. ++ +The configuration variables `$projects_list_group_categories` and +`$project_list_default_category` are described in linkgit:gitweb.conf[5] + +cloneurl (or multiple-valued `gitweb.url`):: + File with repository URL (used for clone and fetch), one per line. + Displayed in the project summary page. You can use multiple-valued + `gitweb.url` repository configuration variable for that, but the file + takes precedence. ++ +This is per-repository enhancement / version of global prefix-based +`@git_base_url_list` gitweb configuration variable (see +linkgit:gitweb.conf[5]). + +gitweb.owner:: + You can use the `gitweb.owner` repository configuration variable to set + repository's owner. It is displayed in the project list and summary + page. ++ +If it's not set, filesystem directory's owner is used (via GECOS field, +i.e. real name field from *getpwuid*(3)) if `$projects_list` is unset +(gitweb scans `$projectroot` for repositories); if `$projects_list` +points to file with list of repositories, then project owner defaults to +value from this file for given repository. + +various `gitweb.*` config variables (in config):: + Read description of `%feature` hash for detailed list, and descriptions. + See also "Configuring gitweb features" section in linkgit:gitweb.conf[5] + + +ACTIONS, AND URLS +----------------- +Gitweb can use path_info (component) based URLs, or it can pass all necessary +information via query parameters. The typical gitweb URLs are broken down in to +five components: + +----------------------------------------------------------------------- +.../gitweb.cgi/<repo>/<action>/<revision>:/<path>?<arguments> +----------------------------------------------------------------------- + +repo:: + The repository the action will be performed on. ++ +All actions except for those that list all available projects, +in whatever form, require this parameter. + +action:: + The action that will be run. Defaults to 'projects_list' if repo + is not set, and to 'summary' otherwise. + +revision:: + Revision shown. Defaults to HEAD. + +path:: + The path within the <repository> that the action is performed on, + for those actions that require it. + +arguments:: + Any arguments that control the behaviour of the action. + +Some actions require or allow to specify two revisions, and sometimes even two +pathnames. In most general form such path_info (component) based gitweb URL +looks like this: + +----------------------------------------------------------------------- +.../gitweb.cgi/<repo>/<action>/<revision_from>:/<path_from>..<revision_to>:/<path_to>?<arguments> +----------------------------------------------------------------------- + + +Each action is implemented as a subroutine, and must be present in %actions +hash. Some actions are disabled by default, and must be turned on via feature +mechanism. For example to enable 'blame' view add the following to gitweb +configuration file: + +----------------------------------------------------------------------- +$feature{'blame'}{'default'} = [1]; +----------------------------------------------------------------------- + + +Actions: +~~~~~~~~ +The standard actions are: + +project_list:: + Lists the available Git repositories. This is the default command if no + repository is specified in the URL. + +summary:: + Displays summary about given repository. This is the default command if + no action is specified in URL, and only repository is specified. + +heads:: +remotes:: + Lists all local or all remote-tracking branches in given repository. ++ +The latter is not available by default, unless configured. + +tags:: + List all tags (lightweight and annotated) in given repository. + +blob:: +tree:: + Shows the files and directories in a given repository path, at given + revision. This is default command if no action is specified in the URL, + and path is given. + +blob_plain:: + Returns the raw data for the file in given repository, at given path and + revision. Links to this action are marked 'raw'. + +blobdiff:: + Shows the difference between two revisions of the same file. + +blame:: +blame_incremental:: + Shows the blame (also called annotation) information for a file. On a + per line basis it shows the revision in which that line was last changed + and the user that committed the change. The incremental version (which + if configured is used automatically when JavaScript is enabled) uses + Ajax to incrementally add blame info to the contents of given file. ++ +This action is disabled by default for performance reasons. + +commit:: +commitdiff:: + Shows information about a specific commit in a repository. The 'commit' + view shows information about commit in more detail, the 'commitdiff' + action shows changeset for given commit. + +patch:: + Returns the commit in plain text mail format, suitable for applying with + linkgit:git-am[1]. + +tag:: + Display specific annotated tag (tag object). + +log:: +shortlog:: + Shows log information (commit message or just commit subject) for a + given branch (starting from given revision). ++ +The 'shortlog' view is more compact; it shows one commit per line. + +history:: + Shows history of the file or directory in a given repository path, + starting from given revision (defaults to HEAD, i.e. default branch). ++ +This view is similar to 'shortlog' view. + +rss:: +atom:: + Generates an RSS (or Atom) feed of changes to repository. + + +WEBSERVER CONFIGURATION +----------------------- +This section explains how to configure some common webservers to run gitweb. In +all cases, `/path/to/gitweb` in the examples is the directory you ran installed +gitweb in, and contains `gitweb_config.perl`. + +If you've configured a web server that isn't listed here for gitweb, please send +in the instructions so they can be included in a future release. + +Apache as CGI +~~~~~~~~~~~~~ +Apache must be configured to support CGI scripts in the directory in +which gitweb is installed. Let's assume that it is '/var/www/cgi-bin' +directory. + +----------------------------------------------------------------------- +ScriptAlias /cgi-bin/ "/var/www/cgi-bin/" + +<Directory "/var/www/cgi-bin"> + Options Indexes FollowSymlinks ExecCGI + AllowOverride None + Order allow,deny + Allow from all +</Directory> +----------------------------------------------------------------------- + +With that configuration the full path to browse repositories would be: + + http://server/cgi-bin/gitweb.cgi + +Apache with mod_perl, via ModPerl::Registry +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +You can use mod_perl with gitweb. You must install Apache::Registry +(for mod_perl 1.x) or ModPerl::Registry (for mod_perl 2.x) to enable +this support. + +Assuming that gitweb is installed to '/var/www/perl', the following +Apache configuration (for mod_perl 2.x) is suitable. + +----------------------------------------------------------------------- +Alias /perl "/var/www/perl" + +<Directory "/var/www/perl"> + SetHandler perl-script + PerlResponseHandler ModPerl::Registry + PerlOptions +ParseHeaders + Options Indexes FollowSymlinks +ExecCGI + AllowOverride None + Order allow,deny + Allow from all +</Directory> +----------------------------------------------------------------------- + +With that configuration the full path to browse repositories would be: + + http://server/perl/gitweb.cgi + +Apache with FastCGI +~~~~~~~~~~~~~~~~~~~ +Gitweb works with Apache and FastCGI. First you need to rename, copy +or symlink gitweb.cgi to gitweb.fcgi. Let's assume that gitweb is +installed in '/usr/share/gitweb' directory. The following Apache +configuration is suitable (UNTESTED!) + +----------------------------------------------------------------------- +FastCgiServer /usr/share/gitweb/gitweb.cgi +ScriptAlias /gitweb /usr/share/gitweb/gitweb.cgi + +Alias /gitweb/static /usr/share/gitweb/static +<Directory /usr/share/gitweb/static> + SetHandler default-handler +</Directory> +----------------------------------------------------------------------- + +With that configuration the full path to browse repositories would be: + + http://server/gitweb + + +ADVANCED WEB SERVER SETUP +------------------------- +All of those examples use request rewriting, and need `mod_rewrite` +(or equivalent; examples below are written for Apache). + +Single URL for gitweb and for fetching +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +If you want to have one URL for both gitweb and your `http://` +repositories, you can configure Apache like this: + +----------------------------------------------------------------------- +<VirtualHost *:80> + ServerName git.example.org + DocumentRoot /pub/git + SetEnv GITWEB_CONFIG /etc/gitweb.conf + + # turning on mod rewrite + RewriteEngine on + + # make the front page an internal rewrite to the gitweb script + RewriteRule ^/$ /cgi-bin/gitweb.cgi + + # make access for "dumb clients" work + RewriteRule ^/(.*\.git/(?!/?(HEAD|info|objects|refs)).*)?$ \ + /cgi-bin/gitweb.cgi%{REQUEST_URI} [L,PT] +</VirtualHost> +----------------------------------------------------------------------- + +The above configuration expects your public repositories to live under +'/pub/git' and will serve them as `http://git.domain.org/dir-under-pub-git`, +both as cloneable GIT URL and as browseable gitweb interface. If you then +start your linkgit:git-daemon[1] with `--base-path=/pub/git --export-all` +then you can even use the `git://` URL with exactly the same path. + +Setting the environment variable `GITWEB_CONFIG` will tell gitweb to use the +named file (i.e. in this example '/etc/gitweb.conf') as a configuration for +gitweb. You don't really need it in above example; it is required only if +your configuration file is in different place than built-in (during +compiling gitweb) 'gitweb_config.perl' or '/etc/gitweb.conf'. See +linkgit:gitweb.conf[5] for details, especially information about precedence +rules. + +If you use the rewrite rules from the example you *might* also need +something like the following in your gitweb configuration file +('/etc/gitweb.conf' following example): +---------------------------------------------------------------------------- +@stylesheets = ("/some/absolute/path/gitweb.css"); +$my_uri = "/"; +$home_link = "/"; +$per_request_config = 1; +---------------------------------------------------------------------------- +Nowadays though gitweb should create HTML base tag when needed (to set base +URI for relative links), so it should work automatically. + + +Webserver configuration with multiple projects' root +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +If you want to use gitweb with several project roots you can edit your +Apache virtual host and gitweb configuration files in the following way. + +The virtual host configuration (in Apache configuration file) should look +like this: +-------------------------------------------------------------------------- +<VirtualHost *:80> + ServerName git.example.org + DocumentRoot /pub/git + SetEnv GITWEB_CONFIG /etc/gitweb.conf + + # turning on mod rewrite + RewriteEngine on + + # make the front page an internal rewrite to the gitweb script + RewriteRule ^/$ /cgi-bin/gitweb.cgi [QSA,L,PT] + + # look for a public_git folder in unix users' home + # http://git.example.org/~<user>/ + RewriteRule ^/\~([^\/]+)(/|/gitweb.cgi)?$ /cgi-bin/gitweb.cgi \ + [QSA,E=GITWEB_PROJECTROOT:/home/$1/public_git/,L,PT] + + # http://git.example.org/+<user>/ + #RewriteRule ^/\+([^\/]+)(/|/gitweb.cgi)?$ /cgi-bin/gitweb.cgi \ + [QSA,E=GITWEB_PROJECTROOT:/home/$1/public_git/,L,PT] + + # http://git.example.org/user/<user>/ + #RewriteRule ^/user/([^\/]+)/(gitweb.cgi)?$ /cgi-bin/gitweb.cgi \ + [QSA,E=GITWEB_PROJECTROOT:/home/$1/public_git/,L,PT] + + # defined list of project roots + RewriteRule ^/scm(/|/gitweb.cgi)?$ /cgi-bin/gitweb.cgi \ + [QSA,E=GITWEB_PROJECTROOT:/pub/scm/,L,PT] + RewriteRule ^/var(/|/gitweb.cgi)?$ /cgi-bin/gitweb.cgi \ + [QSA,E=GITWEB_PROJECTROOT:/var/git/,L,PT] + + # make access for "dumb clients" work + RewriteRule ^/(.*\.git/(?!/?(HEAD|info|objects|refs)).*)?$ \ + /cgi-bin/gitweb.cgi%{REQUEST_URI} [L,PT] +</VirtualHost> +-------------------------------------------------------------------------- + +Here actual project root is passed to gitweb via `GITWEB_PROJECT_ROOT` +environment variable from a web server, so you need to put the following +line in gitweb configuration file ('/etc/gitweb.conf' in above example): +-------------------------------------------------------------------------- +$projectroot = $ENV{'GITWEB_PROJECTROOT'} || "/pub/git"; +-------------------------------------------------------------------------- +*Note* that this requires to be set for each request, so either +`$per_request_config` must be false, or the above must be put in code +referenced by `$per_request_config`; + +These configurations enable two things. First, each unix user (`<user>`) of +the server will be able to browse through gitweb git repositories found in +'~/public_git/' with the following url: + + http://git.example.org/~<user>/ + +If you do not want this feature on your server just remove the second +rewrite rule. + +If you already use `mod_userdir` in your virtual host or you don't want to +use the \'~' as first character, just comment or remove the second rewrite +rule, and uncomment one of the following according to what you want. + +Second, repositories found in '/pub/scm/' and '/var/git/' will be accessible +through `http://git.example.org/scm/` and `http://git.example.org/var/`. +You can add as many project roots as you want by adding rewrite rules like +the third and the fourth. + + +PATH_INFO usage +~~~~~~~~~~~~~~~ +If you enable PATH_INFO usage in gitweb by putting +---------------------------------------------------------------------------- +$feature{'pathinfo'}{'default'} = [1]; +---------------------------------------------------------------------------- +in your gitweb configuration file, it is possible to set up your server so +that it consumes and produces URLs in the form + + http://git.example.com/project.git/shortlog/sometag + +i.e. without 'gitweb.cgi' part, by using a configuration such as the +following. This configuration assumes that '/var/www/gitweb' is the +DocumentRoot of your webserver, contains the gitweb.cgi script and +complementary static files (stylesheet, favicon, JavaScript): + +---------------------------------------------------------------------------- +<VirtualHost *:80> + ServerAlias git.example.com + + DocumentRoot /var/www/gitweb + + <Directory /var/www/gitweb> + Options ExecCGI + AddHandler cgi-script cgi + + DirectoryIndex gitweb.cgi + + RewriteEngine On + RewriteCond %{REQUEST_FILENAME} !-f + RewriteCond %{REQUEST_FILENAME} !-d + RewriteRule ^.* /gitweb.cgi/$0 [L,PT] + </Directory> +</VirtualHost> +---------------------------------------------------------------------------- +The rewrite rule guarantees that existing static files will be properly +served, whereas any other URL will be passed to gitweb as PATH_INFO +parameter. + +*Notice* that in this case you don't need special settings for +`@stylesheets`, `$my_uri` and `$home_link`, but you lose "dumb client" +access to your project .git dirs (described in "Single URL for gitweb and +for fetching" section). A possible workaround for the latter is the +following: in your project root dir (e.g. '/pub/git') have the projects +named *without* a .git extension (e.g. '/pub/git/project' instead of +'/pub/git/project.git') and configure Apache as follows: +---------------------------------------------------------------------------- +<VirtualHost *:80> + ServerAlias git.example.com + + DocumentRoot /var/www/gitweb + + AliasMatch ^(/.*?)(\.git)(/.*)?$ /pub/git$1$3 + <Directory /var/www/gitweb> + Options ExecCGI + AddHandler cgi-script cgi + + DirectoryIndex gitweb.cgi + + RewriteEngine On + RewriteCond %{REQUEST_FILENAME} !-f + RewriteCond %{REQUEST_FILENAME} !-d + RewriteRule ^.* /gitweb.cgi/$0 [L,PT] + </Directory> +</VirtualHost> +---------------------------------------------------------------------------- + +The additional AliasMatch makes it so that + + http://git.example.com/project.git + +will give raw access to the project's git dir (so that the project can be +cloned), while + + http://git.example.com/project + +will provide human-friendly gitweb access. + +This solution is not 100% bulletproof, in the sense that if some project has +a named ref (branch, tag) starting with 'git/', then paths such as + + http://git.example.com/project/command/abranch..git/abranch + +will fail with a 404 error. + + +BUGS +---- +Please report any bugs or feature requests to git@vger.kernel.org, +putting "gitweb" in the subject of email. + +SEE ALSO +-------- +linkgit:gitweb.conf[5], linkgit:git-instaweb[1] + +'gitweb/README', 'gitweb/INSTALL' + +GIT +--- +Part of the linkgit:git[1] suite diff --git a/Documentation/merge-options.txt b/Documentation/merge-options.txt index b613d4ed08..1a5c12e317 100644 --- a/Documentation/merge-options.txt +++ b/Documentation/merge-options.txt @@ -7,6 +7,11 @@ With --no-commit perform the merge but pretend the merge failed and do not autocommit, to give the user a chance to inspect and further tweak the merge result before committing. +--edit:: +-e:: + Invoke editor before committing successful merge to further + edit the default merge message. + --ff:: --no-ff:: Do not generate a merge commit if the merge resolved as diff --git a/Documentation/sequencer.txt b/Documentation/sequencer.txt new file mode 100644 index 0000000000..5747f442f2 --- /dev/null +++ b/Documentation/sequencer.txt @@ -0,0 +1,12 @@ +--continue:: + Continue the operation in progress using the information in + '.git/sequencer'. Can be used to continue after resolving + conflicts in a failed cherry-pick or revert. + +--quit:: + Forget about the current operation in progress. Can be used + to clear the sequencer state after a failed cherry-pick or + revert. + +--abort:: + Cancel the operation and return to the pre-sequence state. diff --git a/Documentation/technical/api-parse-options.txt b/Documentation/technical/api-parse-options.txt index f6a4a361bd..4b92514f60 100644 --- a/Documentation/technical/api-parse-options.txt +++ b/Documentation/technical/api-parse-options.txt @@ -135,9 +135,14 @@ There are some macros to easily define options: describes the group or an empty string. Start the description with an upper-case letter. -`OPT_BOOLEAN(short, long, &int_var, description)`:: - Introduce a boolean option. - `int_var` is incremented on each use. +`OPT_BOOL(short, long, &int_var, description)`:: + Introduce a boolean option. `int_var` is set to one with + `--option` and set to zero with `--no-option`. + +`OPT_COUNTUP(short, long, &int_var, description)`:: + Introduce a count-up option. + `int_var` is incremented on each use of `--option`, and + reset to zero with `--no-option`. `OPT_BIT(short, long, &int_var, description, mask)`:: Introduce a boolean option. @@ -148,8 +153,9 @@ There are some macros to easily define options: If used, `int_var` is bitwise-anded with the inverted `mask`. `OPT_SET_INT(short, long, &int_var, description, integer)`:: - Introduce a boolean option. - If used, set `int_var` to `integer`. + Introduce an integer option. + `int_var` is set to `integer` with `--option`, and + reset to zero with `--no-option`. `OPT_SET_PTR(short, long, &ptr_var, description, ptr)`:: Introduce a boolean option. @@ -198,6 +204,11 @@ There are some macros to easily define options: "auto", set `int_var` to 1 if stdout is a tty or a pager, 0 otherwise. +`OPT_NOOP_NOARG(short, long)`:: + Introduce an option that has no effect and takes no arguments. + Use it to hide deprecated options that are still to be recognized + and ignored silently. + The last element of the array must be `OPT_END()`. diff --git a/Documentation/technical/pack-protocol.txt b/Documentation/technical/pack-protocol.txt index a7004c63e7..546980c0a4 100644 --- a/Documentation/technical/pack-protocol.txt +++ b/Documentation/technical/pack-protocol.txt @@ -60,6 +60,13 @@ process on the server side over the Git protocol is this: "0039git-upload-pack /schacon/gitbook.git\0host=example.com\0" | nc -v example.com 9418 +If the server refuses the request for some reasons, it could abort +gracefully with an error message. + +---- + error-line = PKT-LINE("ERR" SP explanation-text) +---- + SSH Transport ------------- |