diff options
Diffstat (limited to 'Documentation')
| -rw-r--r-- | Documentation/diff-options.txt | 4 | ||||
| -rw-r--r-- | Documentation/git-bisect.txt | 4 | ||||
| -rw-r--r-- | Documentation/git-fetch-pack.txt | 2 | ||||
| -rw-r--r-- | Documentation/git-for-each-ref.txt | 2 | ||||
| -rw-r--r-- | Documentation/git-mktree.txt | 2 | ||||
| -rw-r--r-- | Documentation/git-rebase.txt | 7 | ||||
| -rw-r--r-- | Documentation/git-send-email.txt | 18 | ||||
| -rw-r--r-- | Documentation/git-status.txt | 2 | ||||
| -rw-r--r-- | Documentation/git-svn.txt | 13 | ||||
| -rw-r--r-- | Documentation/git-worktree.txt | 18 | ||||
| -rw-r--r-- | Documentation/technical/api-directory-listing.txt | 2 |
11 files changed, 39 insertions, 35 deletions
diff --git a/Documentation/diff-options.txt b/Documentation/diff-options.txt index e3a44f03cd..f466600972 100644 --- a/Documentation/diff-options.txt +++ b/Documentation/diff-options.txt @@ -568,7 +568,7 @@ the normal order. -- + Patterns have the same syntax and semantics as patterns used for -fnmantch(3) without the FNM_PATHNAME flag, except a pathname also +fnmatch(3) without the FNM_PATHNAME flag, except a pathname also matches a pattern if removing any number of the final pathname components matches the pattern. For example, the pattern "`foo*bar`" matches "`fooasdfbar`" and "`foo/bar/baz/asdf`" but not "`foobarx`". @@ -592,7 +592,7 @@ endif::git-format-patch[] Treat all files as text. --ignore-cr-at-eol:: - Ignore carrige-return at the end of line when doing a comparison. + Ignore carriage-return at the end of line when doing a comparison. --ignore-space-at-eol:: Ignore changes in whitespace at EOL. diff --git a/Documentation/git-bisect.txt b/Documentation/git-bisect.txt index 4a1417bdcd..4b45d837a7 100644 --- a/Documentation/git-bisect.txt +++ b/Documentation/git-bisect.txt @@ -165,8 +165,8 @@ To get a reminder of the currently used terms, use git bisect terms ------------------------------------------------ -You can get just the old (respectively new) term with `git bisect term ---term-old` or `git bisect term --term-good`. +You can get just the old (respectively new) term with `git bisect terms +--term-old` or `git bisect terms --term-good`. If you would like to use your own terms instead of "bad"/"good" or "new"/"old", you can choose any names you like (except existing bisect diff --git a/Documentation/git-fetch-pack.txt b/Documentation/git-fetch-pack.txt index f7ebe36a7b..c975884793 100644 --- a/Documentation/git-fetch-pack.txt +++ b/Documentation/git-fetch-pack.txt @@ -88,7 +88,7 @@ be in a separate packet, and the list must end with a flush packet. infinite even if there is an ancestor-chain that long. --shallow-since=<date>:: - Deepen or shorten the history of a shallow'repository to + Deepen or shorten the history of a shallow repository to include all reachable commits after <date>. --shallow-exclude=<revision>:: diff --git a/Documentation/git-for-each-ref.txt b/Documentation/git-for-each-ref.txt index dffa14a795..085d177d97 100644 --- a/Documentation/git-for-each-ref.txt +++ b/Documentation/git-for-each-ref.txt @@ -121,7 +121,7 @@ refname:: stripping with positive <N>, or it becomes the full refname if stripping with negative <N>. Neither is an error. + -`strip` can be used as a synomym to `lstrip`. +`strip` can be used as a synonym to `lstrip`. objecttype:: The type of the object (`blob`, `tree`, `commit`, `tag`). diff --git a/Documentation/git-mktree.txt b/Documentation/git-mktree.txt index c3616e7711..27fe2b32e1 100644 --- a/Documentation/git-mktree.txt +++ b/Documentation/git-mktree.txt @@ -14,7 +14,7 @@ SYNOPSIS DESCRIPTION ----------- Reads standard input in non-recursive `ls-tree` output format, and creates -a tree object. The order of the tree entries is normalised by mktree so +a tree object. The order of the tree entries is normalized by mktree so pre-sorting the input is not required. The object name of the tree object built is written to the standard output. diff --git a/Documentation/git-rebase.txt b/Documentation/git-rebase.txt index 3277ca1432..dd852068b1 100644 --- a/Documentation/git-rebase.txt +++ b/Documentation/git-rebase.txt @@ -364,9 +364,10 @@ default is `--no-fork-point`, otherwise the default is `--fork-point`. Incompatible with the --interactive option. --signoff:: - This flag is passed to 'git am' to sign off all the rebased - commits (see linkgit:git-am[1]). Incompatible with the - --interactive option. + Add a Signed-off-by: trailer to all the rebased commits. Note + that if `--interactive` is given then only commits marked to be + picked, edited or reworded will have the trailer added. Incompatible + with the `--preserve-merges` option. -i:: --interactive:: diff --git a/Documentation/git-send-email.txt b/Documentation/git-send-email.txt index 71ef97ba9b..60cf96f4c1 100644 --- a/Documentation/git-send-email.txt +++ b/Documentation/git-send-email.txt @@ -255,7 +255,7 @@ must be used for each option. --batch-size=<num>:: Some email servers (e.g. smtp.163.com) limit the number emails to be - sent per session (connection) and this will lead to a faliure when + sent per session (connection) and this will lead to a failure when sending many messages. With this option, send-email will disconnect after sending $<num> messages and wait for a few seconds (see --relogin-delay) and reconnect, to work around such a limit. You may want to @@ -473,16 +473,7 @@ edit ~/.gitconfig to specify your account settings: If you have multifactor authentication setup on your gmail account, you will need to generate an app-specific password for use with 'git send-email'. Visit -https://security.google.com/settings/security/apppasswords to setup an -app-specific password. Once setup, you can store it with the credentials -helper: - - $ git credential fill - protocol=smtp - host=smtp.gmail.com - username=youname@gmail.com - password=app-password - +https://security.google.com/settings/security/apppasswords to create it. Once your commits are ready to be sent to the mailing list, run the following commands: @@ -491,6 +482,11 @@ following commands: $ edit outgoing/0000-* $ git send-email outgoing/* +The first time you run it, you will be prompted for your credentials. Enter the +app-specific or your regular password as appropriate. If you have credential +helper configured (see linkgit:git-credential[1]), the password will be saved in +the credential store so you won't have to type it the next time. + Note: the following perl modules are required Net::SMTP::SSL, MIME::Base64 and Authen::SASL diff --git a/Documentation/git-status.txt b/Documentation/git-status.txt index 6c230c0c72..c16e27e63d 100644 --- a/Documentation/git-status.txt +++ b/Documentation/git-status.txt @@ -113,7 +113,7 @@ The possible options are: - 'matching' - Shows ignored files and directories matching an ignore pattern. + -When 'matching' mode is specified, paths that explicity match an +When 'matching' mode is specified, paths that explicitly match an ignored pattern are shown. If a directory matches an ignore pattern, then it is shown, but not paths contained in the ignored directory. If a directory does not match an ignore pattern, but all contents are diff --git a/Documentation/git-svn.txt b/Documentation/git-svn.txt index 636e09048e..d59379ee23 100644 --- a/Documentation/git-svn.txt +++ b/Documentation/git-svn.txt @@ -635,7 +635,8 @@ config key: svn.findcopiesharder -A<filename>:: --authors-file=<filename>:: - Syntax is compatible with the file used by 'git cvsimport': + Syntax is compatible with the file used by 'git cvsimport' but + an empty email address can be supplied with '<>': + ------------------------------------------------------------------------ loginname = Joe User <user@example.com> @@ -654,8 +655,14 @@ config key: svn.authorsfile If this option is specified, for each SVN committer name that does not exist in the authors file, the given file is executed with the committer name as the first argument. The program is - expected to return a single line of the form "Name <email>", - which will be treated as if included in the authors file. + expected to return a single line of the form "Name <email>" or + "Name <>", which will be treated as if included in the authors + file. ++ +Due to historical reasons a relative 'filename' is first searched +relative to the current directory for 'init' and 'clone' and relative +to the root of the working tree for 'fetch'. If 'filename' is +not found, it is searched like any other command in '$PATH'. + [verse] config key: svn.authorsProg diff --git a/Documentation/git-worktree.txt b/Documentation/git-worktree.txt index e7eb24ab85..2755ca90e3 100644 --- a/Documentation/git-worktree.txt +++ b/Documentation/git-worktree.txt @@ -27,11 +27,12 @@ out more than one branch at a time. With `git worktree add` a new working tree is associated with the repository. This new working tree is called a "linked working tree" as opposed to the "main working tree" prepared by "git init" or "git clone". A repository has one main working tree (if it's not a -bare repository) and zero or more linked working trees. +bare repository) and zero or more linked working trees. When you are done +with a linked working tree, remove it with `git worktree remove`. -When you are done with a linked working tree you can simply delete it. -The working tree's administrative files in the repository (see -"DETAILS" below) will eventually be removed automatically (see +If a working tree is deleted without using `git worktree remove`, then +its associated administrative files, which reside in the repository +(see "DETAILS" below), will eventually be removed automatically (see `gc.worktreePruneExpire` in linkgit:git-config[1]), or you can run `git worktree prune` in the main or any linked working tree to clean up any stale administrative files. @@ -106,7 +107,7 @@ OPTIONS By default, `add` refuses to create a new working tree when `<commit-ish>` is a branch name and is already checked out by another working tree and `remove` refuses to remove an unclean - working tree. This option overrides that safeguard. + working tree. This option overrides these safeguards. -b <new-branch>:: -B <new-branch>:: @@ -232,7 +233,7 @@ The worktree list command has two output formats. The default format shows the details on a single line with columns. For example: ------------ -S git worktree list +$ git worktree list /path/to/bare-source (bare) /path/to/linked-worktree abcd1234 [master] /path/to/other-linked-worktree 1234abc (detached HEAD) @@ -247,7 +248,7 @@ if the value is true. An empty line indicates the end of a worktree. For example: ------------ -S git worktree list --porcelain +$ git worktree list --porcelain worktree /path/to/bare-source bare @@ -278,8 +279,7 @@ $ pushd ../temp # ... hack hack hack ... $ git commit -a -m 'emergency fix for boss' $ popd -$ rm -rf ../temp -$ git worktree prune +$ git worktree remove ../temp ------------ BUGS diff --git a/Documentation/technical/api-directory-listing.txt b/Documentation/technical/api-directory-listing.txt index 7fae00f44f..4f44ca24f6 100644 --- a/Documentation/technical/api-directory-listing.txt +++ b/Documentation/technical/api-directory-listing.txt @@ -53,7 +53,7 @@ The notable options are: not be returned even if all of its contents are ignored. In this case, the contents are returned as individual entries. + -If this is set, files and directories that explicity match an ignore +If this is set, files and directories that explicitly match an ignore pattern are reported. Implicity ignored directories (directories that do not match an ignore pattern, but whose contents are all ignored) are not reported, instead all of the contents are reported. |