diff options
Diffstat (limited to 'Documentation')
61 files changed, 1830 insertions, 259 deletions
diff --git a/Documentation/CodingGuidelines b/Documentation/CodingGuidelines index 45465bc0c9..1ff6d8e2d2 100644 --- a/Documentation/CodingGuidelines +++ b/Documentation/CodingGuidelines @@ -498,7 +498,12 @@ Error Messages - Do not end error messages with a full stop. - - Do not capitalize ("unable to open %s", not "Unable to open %s") + - Do not capitalize the first word, only because it is the first word + in the message ("unable to open %s", not "Unable to open %s"). But + "SHA-3 not supported" is fine, because the reason the first word is + capitalized is not because it is at the beginning of the sentence, + but because the word would be spelled in capital letters even when + it appeared in the middle of the sentence. - Say what the error is first ("cannot open %s", not "%s: cannot open") diff --git a/Documentation/Makefile b/Documentation/Makefile index 81d1bf7a04..2aae4c9cbb 100644 --- a/Documentation/Makefile +++ b/Documentation/Makefile @@ -2,6 +2,8 @@ MAN1_TXT = MAN5_TXT = MAN7_TXT = +HOWTO_TXT = +DOC_DEP_TXT = TECH_DOCS = ARTICLES = SP_ARTICLES = @@ -42,6 +44,11 @@ MAN7_TXT += gittutorial-2.txt MAN7_TXT += gittutorial.txt MAN7_TXT += gitworkflows.txt +HOWTO_TXT += $(wildcard howto/*.txt) + +DOC_DEP_TXT += $(wildcard *.txt) +DOC_DEP_TXT += $(wildcard config/*.txt) + ifdef MAN_FILTER MAN_TXT = $(filter $(MAN_FILTER),$(MAN1_TXT) $(MAN5_TXT) $(MAN7_TXT)) else @@ -76,6 +83,7 @@ SP_ARTICLES += howto/rebuild-from-update-hook SP_ARTICLES += howto/rebase-from-internal-branch SP_ARTICLES += howto/keep-canonical-history-correct SP_ARTICLES += howto/maintain-git +SP_ARTICLES += howto/coordinate-embargoed-releases API_DOCS = $(patsubst %.txt,%,$(filter-out technical/api-index-skel.txt technical/api-index.txt, $(wildcard technical/api-*.txt))) SP_ARTICLES += $(API_DOCS) @@ -90,6 +98,7 @@ TECH_DOCS += technical/multi-pack-index TECH_DOCS += technical/pack-format TECH_DOCS += technical/pack-heuristics TECH_DOCS += technical/pack-protocol +TECH_DOCS += technical/parallel-checkout TECH_DOCS += technical/partial-clone TECH_DOCS += technical/protocol-capabilities TECH_DOCS += technical/protocol-common @@ -284,7 +293,7 @@ docdep_prereqs = \ mergetools-list.made $(mergetools_txt) \ cmd-list.made $(cmds_txt) -doc.dep : $(docdep_prereqs) $(wildcard *.txt) $(wildcard config/*.txt) build-docdep.perl +doc.dep : $(docdep_prereqs) $(DOC_DEP_TXT) build-docdep.perl $(QUIET_GEN)$(RM) $@+ $@ && \ $(PERL_PATH) ./build-docdep.perl >$@+ $(QUIET_STDERR) && \ mv $@+ $@ @@ -427,9 +436,9 @@ $(patsubst %.txt,%.texi,$(MAN_TXT)): %.texi : %.xml $(DOCBOOK2X_TEXI) --to-stdout $*.xml >$@+ && \ mv $@+ $@ -howto-index.txt: howto-index.sh $(wildcard howto/*.txt) +howto-index.txt: howto-index.sh $(HOWTO_TXT) $(QUIET_GEN)$(RM) $@+ $@ && \ - '$(SHELL_PATH_SQ)' ./howto-index.sh $(sort $(wildcard howto/*.txt)) >$@+ && \ + '$(SHELL_PATH_SQ)' ./howto-index.sh $(sort $(HOWTO_TXT)) >$@+ && \ mv $@+ $@ $(patsubst %,%.html,$(ARTICLES)) : %.html : %.txt @@ -438,7 +447,7 @@ $(patsubst %,%.html,$(ARTICLES)) : %.html : %.txt WEBDOC_DEST = /pub/software/scm/git/docs howto/%.html: ASCIIDOC_EXTRA += -a git-relative-html-prefix=../ -$(patsubst %.txt,%.html,$(wildcard howto/*.txt)): %.html : %.txt GIT-ASCIIDOCFLAGS +$(patsubst %.txt,%.html,$(HOWTO_TXT)): %.html : %.txt GIT-ASCIIDOCFLAGS $(QUIET_ASCIIDOC)$(RM) $@+ $@ && \ sed -e '1,/^$$/d' $< | \ $(TXT_TO_HTML) - >$@+ && \ @@ -470,7 +479,13 @@ print-man1: @for i in $(MAN1_TXT); do echo $$i; done lint-docs:: - $(QUIET_LINT)$(PERL_PATH) lint-gitlink.perl + $(QUIET_LINT)$(PERL_PATH) lint-gitlink.perl \ + $(HOWTO_TXT) $(DOC_DEP_TXT) \ + --section=1 $(MAN1_TXT) \ + --section=5 $(MAN5_TXT) \ + --section=7 $(MAN7_TXT); \ + $(PERL_PATH) lint-man-end-blurb.perl $(MAN_TXT); \ + $(PERL_PATH) lint-man-section-order.perl $(MAN_TXT); ifeq ($(wildcard po/Makefile),po/Makefile) doc-l10n install-l10n:: diff --git a/Documentation/RelNotes/2.32.0.txt b/Documentation/RelNotes/2.32.0.txt new file mode 100644 index 0000000000..f4e5191ae2 --- /dev/null +++ b/Documentation/RelNotes/2.32.0.txt @@ -0,0 +1,282 @@ +Git 2.32 Release Notes +====================== + +Backward compatibility notes +---------------------------- + + * ".gitattributes", ".gitignore", and ".mailmap" files that are + symbolic links are ignored. + + +Updates since v2.31 +------------------- + +UI, Workflows & Features + + * It does not make sense to make ".gitattributes", ".gitignore" and + ".mailmap" symlinks, as they are supposed to be usable from the + object store (think: bare repositories where HEAD:.mailmap etc. are + used). When these files are symbolic links, we used to read the + contents of the files pointed by them by mistake, which has been + corrected. + + * "git stash show" learned to optionally show untracked part of the + stash. + + * "git log --format='...'" learned "%(describe)" placeholder. + + * "git repack" so far has been only capable of repacking everything + under the sun into a single pack (or split by size). A cleverer + strategy to reduce the cost of repacking a repository has been + introduced. + + * The http codepath learned to let the credential layer to cache the + password used to unlock a certificate that has successfully been + used. + + * "git commit --fixup=<commit>", which was to tweak the changes made + to the contents while keeping the original log message intact, + learned "--fixup=(amend|reword):<commit>", that can be used to + tweak both the message and the contents, and only the message, + respectively. + + * When accessing a server with a URL like https://user:pass@site/, we + did not to fall back to the basic authentication with the + credential material embedded in the URL after the "Negotiate" + authentication failed. Now we do. + + * "git send-email" learned to honor the core.hooksPath configuration. + + * "git format-patch -v<n>" learned to allow a reroll count that is + not an integer. + + * "git commit" learned "--trailer <key>[=<value>]" option; together + with the interpret-trailers command, this will make it easier to + support custom trailers. + + * "git clone --reject-shallow" option fails the clone as soon as we + notice that we are cloning from a shallow repository. + + * A configuration variable has been added to force tips of certain + refs to be given a reachability bitmap. + + * "gitweb" learned "e-mail privacy" feature to redact strings that + look like e-mail addresses on various pages. + + * "git apply --3way" has always been "to fall back to 3-way merge + only when straight application fails". Swap the order of falling + back so that 3-way is always attempted first (only when the option + is given, of course) and then straight patch application is used as + a fallback when it fails. + + * "git apply" now takes "--3way" and "--cached" at the same time, and + work and record results only in the index. + + * The command line completion (in contrib/) has learned that + CHERRY_PICK_HEAD is a possible pseudo-ref. + + * Userdiff patterns for "Scheme" has been added. + + * "git log" learned "--diff-merges=<style>" option, with an + associated configuration variable log.diffMerges. + + +Performance, Internal Implementation, Development Support etc. + + * Rename detection rework continues. + + * GIT_TEST_FAIL_PREREQS is a mechanism to skip test pieces with + prerequisites to catch broken tests that depend on the side effects + of optional pieces, but did not work at all when negative + prerequisites were involved. + (merge 27d578d904 jk/fail-prereq-testfix later to maint). + + * "git diff-index" codepath has been taught to trust fsmonitor status + to reduce number of lstat() calls. + (merge 7e5aa13d2c nk/diff-index-fsmonitor later to maint). + + * Reorganize Makefile to allow building git.o and other essential + objects without extra stuff needed only for testing. + + * Preparatory API changes for parallel checkout. + + * A simple IPC interface gets introduced to build services like + fsmonitor on top. + + * Fsck API clean-up. + + * SECURITY.md that is facing individual contributors and end users + has been introduced. Also a procedure to follow when preparing + embargoed releases has been spelled out. + (merge 09420b7648 js/security-md later to maint). + + * Optimize "rev-list --use-bitmap-index --objects" corner case that + uses negative tags as the stopping points. + + * CMake update for vsbuild. + + * An on-disk reverse-index to map the in-pack location of an object + back to its object name across multiple packfiles is introduced. + + * Generate [ec]tags under $(QUIET_GEN). + + * Clean-up codepaths that implements "git send-email --validate" + option and improves the message from it. + + * The last remnant of gettext-poison has been removed. + + * The test framework has been taught to optionally turn the default + merge strategy to "ort" throughout the system where we use + three-way merges internally, like cherry-pick, rebase etc., + primarily to enhance its test coverage (the strategy has been + available as an explicit "-s ort" choice). + + * A bit of code clean-up and a lot of test clean-up around userdiff + area. + + * Handling of "promisor packs" that allows certain objects to be + missing and lazily retrievable has been optimized (a bit). + + * When packet_write() fails, we gave an extra error message + unnecessarily, which has been corrected. + + * The checkout machinery has been taught to perform the actual + write-out of the files in parallel when able. + + * Show errno in the trace output in the error codepath that calls + read_raw_ref method. + + * Effort to make the command line completion (in contrib/) safe with + "set -u" continues. + + +Fixes since v2.31 +----------------- + + * The fsmonitor interface read from its input without making sure + there is something to read from. This bug is new in 2.31 + timeframe. + + * The data structure used by fsmonitor interface was not properly + duplicated during an in-core merge, leading to use-after-free etc. + + * "git bisect" reimplemented more in C during 2.30 timeframe did not + take an annotated tag as a good/bad endpoint well. This regression + has been corrected. + + * Fix macros that can silently inject unintended null-statements. + + * CALLOC_ARRAY() macro replaces many uses of xcalloc(). + + * Update insn in Makefile comments to run fuzz-all target. + + * Fix a corner case bug in "git mv" on case insensitive systems, + which was introduced in 2.29 timeframe. + + * We had a code to diagnose and die cleanly when a required + clean/smudge filter is missing, but an assert before that + unnecessarily fired, hiding the end-user facing die() message. + (merge 6fab35f748 mt/cleanly-die-upon-missing-required-filter later to maint). + + * Update C code that sets a few configuration variables when a remote + is configured so that it spells configuration variable names in the + canonical camelCase. + (merge 0f1da600e6 ab/remote-write-config-in-camel-case later to maint). + + * A new configuration variable has been introduced to allow choosing + which version of the generation number gets used in the + commit-graph file. + (merge 702110aac6 ds/commit-graph-generation-config later to maint). + + * Perf test update to work better in secondary worktrees. + (merge 36e834abc1 jk/perf-in-worktrees later to maint). + + * Updates to memory allocation code around the use of pcre2 library. + (merge c1760352e0 ab/grep-pcre2-allocfix later to maint). + + * "git -c core.bare=false clone --bare ..." would have segfaulted, + which has been corrected. + (merge 75555676ad bc/clone-bare-with-conflicting-config later to maint). + + * When "git checkout" removes a path that does not exist in the + commit it is checking out, it wasn't careful enough not to follow + symbolic links, which has been corrected. + (merge fab78a0c3d mt/checkout-remove-nofollow later to maint). + + * A few option description strings started with capital letters, + which were corrected. + (merge 5ee90326dc cc/downcase-opt-help later to maint). + + * Plug or annotate remaining leaks that trigger while running the + very basic set of tests. + (merge 68ffe095a2 ah/plugleaks later to maint). + + * The hashwrite() API uses a buffering mechanism to avoid calling + write(2) too frequently. This logic has been refactored to be + easier to understand. + (merge ddaf1f62e3 ds/clarify-hashwrite later to maint). + + * "git cherry-pick/revert" with or without "--[no-]edit" did not spawn + the editor as expected (e.g. "revert --no-edit" after a conflict + still asked to edit the message), which has been corrected. + (merge 39edfd5cbc en/sequencer-edit-upon-conflict-fix later to maint). + + * "git daemon" has been tightened against systems that take backslash + as directory separator. + (merge 9a7f1ce8b7 rs/daemon-sanitize-dir-sep later to maint). + + * A NULL-dereference bug has been corrected in an error codepath in + "git for-each-ref", "git branch --list" etc. + (merge c685450880 jk/ref-filter-segfault-fix later to maint). + + * Streamline the codepath to fix the UTF-8 encoding issues in the + argv[] and the prefix on macOS. + (merge c7d0e61016 tb/precompose-prefix-simplify later to maint). + + * The command-line completion script (in contrib/) had a couple of + references that would have given a warning under the "-u" (nounset) + option. + (merge c5c0548d79 vs/completion-with-set-u later to maint). + + * When "git pack-objects" makes a literal copy of a part of existing + packfile using the reachability bitmaps, its update to the progress + meter was broken. + (merge 8e118e8490 jk/pack-objects-bitmap-progress-fix later to maint). + + * The dependencies for config-list.h and command-list.h were broken + when the former was split out of the latter, which has been + corrected. + (merge 56550ea718 sg/bugreport-fixes later to maint). + + * "git push --quiet --set-upstream" was not quiet when setting the + upstream branch configuration, which has been corrected. + (merge f3cce896a8 ow/push-quiet-set-upstream later to maint). + + * The prefetch task in "git maintenance" assumed that "git fetch" + from any remote would fetch all its local branches, which would + fetch too much if the user is interested in only a subset of + branches there. + (merge 32f67888d8 ds/maintenance-prefetch-fix later to maint). + + * Clarify that pathnames recorded in Git trees are most often (but + not necessarily) encoded in UTF-8. + (merge 9364bf465d ab/pathname-encoding-doc later to maint). + + * Other code cleanup, docfix, build fix, etc. + (merge f451960708 dl/cat-file-doc-cleanup later to maint). + (merge 12604a8d0c sv/t9801-test-path-is-file-cleanup later to maint). + (merge ea7e63921c jr/doc-ignore-typofix later to maint). + (merge 23c781f173 ps/update-ref-trans-hook-doc later to maint). + (merge 42efa1231a jk/filter-branch-sha256 later to maint). + (merge 4c8e3dca6e tb/push-simple-uses-branch-merge-config later to maint). + (merge 6534d436a2 bs/asciidoctor-installation-hints later to maint). + (merge 47957485b3 ab/read-tree later to maint). + (merge 2be927f3d1 ab/diff-no-index-tests later to maint). + (merge 76593c09bb ab/detox-gettext-tests later to maint). + (merge 28e29ee38b jc/doc-format-patch-clarify later to maint). + (merge fc12b6fdde fm/user-manual-use-preface later to maint). + (merge dba94e3a85 cc/test-helper-bloom-usage-fix later to maint). + (merge 61a7660516 hn/reftable-tables-doc-update later to maint). + (merge 81ed96a9b2 jt/fetch-pack-request-fix later to maint). + (merge 151b6c2dd7 jc/doc-do-not-capitalize-clarification later to maint). + (merge 9160068ac6 js/access-nul-emulation-on-windows later to maint). diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches index 0452db2e67..55287d72e0 100644 --- a/Documentation/SubmittingPatches +++ b/Documentation/SubmittingPatches @@ -117,10 +117,13 @@ If in doubt which identifier to use, run `git log --no-merges` on the files you are modifying to see the current conventions. [[summary-section]] -It's customary to start the remainder of the first line after "area: " -with a lower-case letter. E.g. "doc: clarify...", not "doc: -Clarify...", or "githooks.txt: improve...", not "githooks.txt: -Improve...". +The title sentence after the "area:" prefix omits the full stop at the +end, and its first word is not capitalized unless there is a reason to +capitalize it other than because it is the first word in the sentence. +E.g. "doc: clarify...", not "doc: Clarify...", or "githooks.txt: +improve...", not "githooks.txt: Improve...". But "refs: HEAD is also +treated as a ref" is correct, as we spell `HEAD` in all caps even when +it appears in the middle of a sentence. [[meaningful-message]] The body should provide a meaningful commit message, which: diff --git a/Documentation/config/advice.txt b/Documentation/config/advice.txt index acbd0c09aa..8b2849ff7b 100644 --- a/Documentation/config/advice.txt +++ b/Documentation/config/advice.txt @@ -119,4 +119,8 @@ advice.*:: addEmptyPathspec:: Advice shown if a user runs the add command without providing the pathspec parameter. + updateSparsePath:: + Advice shown when either linkgit:git-add[1] or linkgit:git-rm[1] + is asked to update index entries outside the current sparse + checkout. -- diff --git a/Documentation/config/checkout.txt b/Documentation/config/checkout.txt index 2cddf7b4b4..bfbca90f0e 100644 --- a/Documentation/config/checkout.txt +++ b/Documentation/config/checkout.txt @@ -21,3 +21,24 @@ checkout.guess:: Provides the default value for the `--guess` or `--no-guess` option in `git checkout` and `git switch`. See linkgit:git-switch[1] and linkgit:git-checkout[1]. + +checkout.workers:: + The number of parallel workers to use when updating the working tree. + The default is one, i.e. sequential execution. If set to a value less + than one, Git will use as many workers as the number of logical cores + available. This setting and `checkout.thresholdForParallelism` affect + all commands that perform checkout. E.g. checkout, clone, reset, + sparse-checkout, etc. ++ +Note: parallel checkout usually delivers better performance for repositories +located on SSDs or over NFS. For repositories on spinning disks and/or machines +with a small number of cores, the default sequential checkout often performs +better. The size and compression level of a repository might also influence how +well the parallel version performs. + +checkout.thresholdForParallelism:: + When running parallel checkout with a small number of files, the cost + of subprocess spawning and inter-process communication might outweigh + the parallelization gains. This setting allows to define the minimum + number of files for which parallel checkout should be attempted. The + default is 100. diff --git a/Documentation/config/clone.txt b/Documentation/config/clone.txt index 47de36a5fe..7bcfbd18a5 100644 --- a/Documentation/config/clone.txt +++ b/Documentation/config/clone.txt @@ -2,3 +2,7 @@ clone.defaultRemoteName:: The name of the remote to create when cloning a repository. Defaults to `origin`, and can be overridden by passing the `--origin` command-line option to linkgit:git-clone[1]. + +clone.rejectShallow:: + Reject to clone a repository if it is a shallow one, can be overridden by + passing option `--reject-shallow` in command line. See linkgit:git-clone[1] diff --git a/Documentation/config/commitgraph.txt b/Documentation/config/commitgraph.txt index 4582c39fc4..30604e4a4c 100644 --- a/Documentation/config/commitgraph.txt +++ b/Documentation/config/commitgraph.txt @@ -1,3 +1,9 @@ +commitGraph.generationVersion:: + Specifies the type of generation number version to use when writing + or reading the commit-graph file. If version 1 is specified, then + the corrected commit dates will not be written or read. Defaults to + 2. + commitGraph.maxNewFilters:: Specifies the default value for the `--max-new-filters` option of `git commit-graph write` (c.f., linkgit:git-commit-graph[1]). diff --git a/Documentation/config/index.txt b/Documentation/config/index.txt index 7cb50b37e9..75f3a2d105 100644 --- a/Documentation/config/index.txt +++ b/Documentation/config/index.txt @@ -14,6 +14,11 @@ index.recordOffsetTable:: Defaults to 'true' if index.threads has been explicitly enabled, 'false' otherwise. +index.sparse:: + When enabled, write the index using sparse-directory entries. This + has no effect unless `core.sparseCheckout` and + `core.sparseCheckoutCone` are both enabled. Defaults to 'false'. + index.threads:: Specifies the number of threads to spawn when loading the index. This is meant to reduce index load time on multiprocessor machines. diff --git a/Documentation/config/log.txt b/Documentation/config/log.txt index 208d5fdcaa..456eb07800 100644 --- a/Documentation/config/log.txt +++ b/Documentation/config/log.txt @@ -24,6 +24,11 @@ log.excludeDecoration:: the config option can be overridden by the `--decorate-refs` option. +log.diffMerges:: + Set default diff format to be used for merge commits. See + `--diff-merges` in linkgit:git-log[1] for details. + Defaults to `separate`. + log.follow:: If `true`, `git log` will act as if the `--follow` option was used when a single <path> is given. This has the same limitations as `--follow`, diff --git a/Documentation/config/pack.txt b/Documentation/config/pack.txt index 3da4ea98e2..c0844d8d8e 100644 --- a/Documentation/config/pack.txt +++ b/Documentation/config/pack.txt @@ -122,6 +122,21 @@ pack.useSparse:: commits contain certain types of direct renames. Default is `true`. +pack.preferBitmapTips:: + When selecting which commits will receive bitmaps, prefer a + commit at the tip of any reference that is a suffix of any value + of this configuration over any other commits in the "selection + window". ++ +Note that setting this configuration to `refs/foo` does not mean that +the commits at the tips of `refs/foo/bar` and `refs/foo/baz` will +necessarily be selected. This is because commits are selected for +bitmaps from within a series of windows of variable length. ++ +If a commit at the tip of any reference which is a suffix of any value +of this configuration is seen in a window, it is immediately given +preference over any other commit in that window. + pack.writeBitmaps (deprecated):: This is a deprecated synonym for `repack.writeBitmaps`. diff --git a/Documentation/config/rebase.txt b/Documentation/config/rebase.txt index 214f31b451..8c979cb20f 100644 --- a/Documentation/config/rebase.txt +++ b/Documentation/config/rebase.txt @@ -1,10 +1,3 @@ -rebase.useBuiltin:: - Unused configuration variable. Used in Git versions 2.20 and - 2.21 as an escape hatch to enable the legacy shellscript - implementation of rebase. Now the built-in rewrite of it in C - is always used. Setting this will emit a warning, to alert any - remaining users that setting this now does nothing. - rebase.backend:: Default backend to use for rebasing. Possible choices are 'apply' or 'merge'. In the future, if the merge backend gains diff --git a/Documentation/config/stash.txt b/Documentation/config/stash.txt index 00eb35434e..413f907cba 100644 --- a/Documentation/config/stash.txt +++ b/Documentation/config/stash.txt @@ -5,6 +5,11 @@ stash.useBuiltin:: is always used. Setting this will emit a warning, to alert any remaining users that setting this now does nothing. +stash.showIncludeUntracked:: + If this is set to true, the `git stash show` command without an + option will show the untracked files of a stash entry. Defaults to + false. See description of 'show' command in linkgit:git-stash[1]. + stash.showPatch:: If this is set to true, the `git stash show` command without an option will show the stash entry in patch form. Defaults to false. diff --git a/Documentation/config/uploadpack.txt b/Documentation/config/uploadpack.txt index b0d761282c..32fad5bbe8 100644 --- a/Documentation/config/uploadpack.txt +++ b/Documentation/config/uploadpack.txt @@ -59,15 +59,16 @@ uploadpack.allowFilter:: uploadpackfilter.allow:: Provides a default value for unspecified object filters (see: the - below configuration variable). + below configuration variable). If set to `true`, this will also + enable all filters which get added in the future. Defaults to `true`. uploadpackfilter.<filter>.allow:: Explicitly allow or ban the object filter corresponding to `<filter>`, where `<filter>` may be one of: `blob:none`, - `blob:limit`, `tree`, `sparse:oid`, or `combine`. If using - combined filters, both `combine` and all of the nested filter - kinds must be allowed. Defaults to `uploadpackfilter.allow`. + `blob:limit`, `object:type`, `tree`, `sparse:oid`, or `combine`. + If using combined filters, both `combine` and all of the nested + filter kinds must be allowed. Defaults to `uploadpackfilter.allow`. uploadpackfilter.tree.maxDepth:: Only allow `--filter=tree:<n>` when `<n>` is no more than the value of diff --git a/Documentation/diff-generate-patch.txt b/Documentation/diff-generate-patch.txt index 2db8eacc3e..c78063d4f7 100644 --- a/Documentation/diff-generate-patch.txt +++ b/Documentation/diff-generate-patch.txt @@ -11,7 +11,7 @@ linkgit:git-diff-files[1] with the `-p` option produces patch text. You can customize the creation of patch text via the `GIT_EXTERNAL_DIFF` and the `GIT_DIFF_OPTS` environment variables -(see linkgit:git[1]). +(see linkgit:git[1]), and the `diff` attribute (see linkgit:gitattributes[5]). What the -p option produces is slightly different from the traditional diff format: @@ -74,6 +74,11 @@ separate lines indicate the old and the new mode. rename from b rename to a +5. Hunk headers mention the name of the function to which the hunk + applies. See "Defining a custom hunk-header" in + linkgit:gitattributes[5] for details of how to tailor to this to + specific languages. + Combined diff format -------------------- diff --git a/Documentation/diff-options.txt b/Documentation/diff-options.txt index aa2b5c11f2..530d115914 100644 --- a/Documentation/diff-options.txt +++ b/Documentation/diff-options.txt @@ -34,7 +34,7 @@ endif::git-diff[] endif::git-format-patch[] ifdef::git-log[] ---diff-merges=(off|none|first-parent|1|separate|m|combined|c|dense-combined|cc):: +--diff-merges=(off|none|on|first-parent|1|separate|m|combined|c|dense-combined|cc):: --no-diff-merges:: Specify diff format to be used for merge commits. Default is {diff-merges-default} unless `--first-parent` is in use, in which case @@ -45,17 +45,24 @@ ifdef::git-log[] Disable output of diffs for merge commits. Useful to override implied value. + +--diff-merges=on::: +--diff-merges=m::: +-m::: + This option makes diff output for merge commits to be shown in + the default format. `-m` will produce the output only if `-p` + is given as well. The default format could be changed using + `log.diffMerges` configuration parameter, which default value + is `separate`. ++ --diff-merges=first-parent::: --diff-merges=1::: This option makes merge commits show the full diff with respect to the first parent only. + --diff-merges=separate::: ---diff-merges=m::: --m::: This makes merge commits show the full diff with respect to each of the parents. Separate log entry and diff is generated - for each parent. `-m` doesn't produce any output without `-p`. + for each parent. + --diff-merges=combined::: --diff-merges=c::: @@ -293,11 +300,14 @@ explained for the configuration variable `core.quotePath` (see linkgit:git-config[1]). --name-only:: - Show only names of changed files. + Show only names of changed files. The file names are often encoded in UTF-8. + For more information see the discussion about encoding in the linkgit:git-log[1] + manual page. --name-status:: Show only names and status of changed files. See the description of the `--diff-filter` option on what the status letters mean. + Just like `--name-only` the file names are often encoded in UTF-8. --submodule[=<format>]:: Specify how differences in submodules are shown. When specifying diff --git a/Documentation/fetch-options.txt b/Documentation/fetch-options.txt index 07783deee3..9e7b4e189c 100644 --- a/Documentation/fetch-options.txt +++ b/Documentation/fetch-options.txt @@ -110,6 +110,11 @@ ifndef::git-pull[] setting `fetch.writeCommitGraph`. endif::git-pull[] +--prefetch:: + Modify the configured refspec to place all refs into the + `refs/prefetch/` namespace. See the `prefetch` task in + linkgit:git-maintenance[1]. + -p:: --prune:: Before fetching, remove any remote-tracking references that no diff --git a/Documentation/git-apply.txt b/Documentation/git-apply.txt index 91d9a8601c..aa1ae56a25 100644 --- a/Documentation/git-apply.txt +++ b/Documentation/git-apply.txt @@ -84,12 +84,13 @@ OPTIONS -3:: --3way:: - When the patch does not apply cleanly, fall back on 3-way merge if - the patch records the identity of blobs it is supposed to apply to, - and we have those blobs available locally, possibly leaving the + Attempt 3-way merge if the patch records the identity of blobs it is supposed + to apply to and we have those blobs available locally, possibly leaving the conflict markers in the files in the working tree for the user to - resolve. This option implies the `--index` option, and is incompatible - with the `--reject` and the `--cached` options. + resolve. This option implies the `--index` option unless the + `--cached` option is used, and is incompatible with the `--reject` option. + When used with the `--cached` option, any conflicts are left at higher stages + in the cache. --build-fake-ancestor=<file>:: Newer 'git diff' output has embedded 'index information' diff --git a/Documentation/git-cat-file.txt b/Documentation/git-cat-file.txt index 8e192d87db..4eb0421b3f 100644 --- a/Documentation/git-cat-file.txt +++ b/Documentation/git-cat-file.txt @@ -35,42 +35,42 @@ OPTIONS -t:: Instead of the content, show the object type identified by - <object>. + `<object>`. -s:: Instead of the content, show the object size identified by - <object>. + `<object>`. -e:: - Exit with zero status if <object> exists and is a valid - object. If <object> is of an invalid format exit with non-zero and + Exit with zero status if `<object>` exists and is a valid + object. If `<object>` is of an invalid format exit with non-zero and emits an error on stderr. -p:: - Pretty-print the contents of <object> based on its type. + Pretty-print the contents of `<object>` based on its type. <type>:: - Typically this matches the real type of <object> but asking + Typically this matches the real type of `<object>` but asking for a type that can trivially be dereferenced from the given - <object> is also permitted. An example is to ask for a - "tree" with <object> being a commit object that contains it, - or to ask for a "blob" with <object> being a tag object that + `<object>` is also permitted. An example is to ask for a + "tree" with `<object>` being a commit object that contains it, + or to ask for a "blob" with `<object>` being a tag object that points at it. --textconv:: Show the content as transformed by a textconv filter. In this case, - <object> has to be of the form <tree-ish>:<path>, or :<path> in + `<object>` has to be of the form `<tree-ish>:<path>`, or `:<path>` in order to apply the filter to the content recorded in the index at - <path>. + `<path>`. --filters:: Show the content as converted by the filters configured in - the current working tree for the given <path> (i.e. smudge filters, - end-of-line conversion, etc). In this case, <object> has to be of - the form <tree-ish>:<path>, or :<path>. + the current working tree for the given `<path>` (i.e. smudge filters, + end-of-line conversion, etc). In this case, `<object>` has to be of + the form `<tree-ish>:<path>`, or `:<path>`. --path=<path>:: - For use with --textconv or --filters, to allow specifying an object + For use with `--textconv` or `--filters`, to allow specifying an object name and a path separately, e.g. when it is difficult to figure out the revision from which the blob came. @@ -115,15 +115,15 @@ OPTIONS repository. --allow-unknown-type:: - Allow -s or -t to query broken/corrupt objects of unknown type. + Allow `-s` or `-t` to query broken/corrupt objects of unknown type. --follow-symlinks:: - With --batch or --batch-check, follow symlinks inside the + With `--batch` or `--batch-check`, follow symlinks inside the repository when requesting objects with extended SHA-1 expressions of the form tree-ish:path-in-tree. Instead of providing output about the link itself, provide output about the linked-to object. If a symlink points outside the - tree-ish (e.g. a link to /foo or a root-level link to ../foo), + tree-ish (e.g. a link to `/foo` or a root-level link to `../foo`), the portion of the link which is outside the tree will be printed. + @@ -175,15 +175,15 @@ respectively print: OUTPUT ------ -If `-t` is specified, one of the <type>. +If `-t` is specified, one of the `<type>`. -If `-s` is specified, the size of the <object> in bytes. +If `-s` is specified, the size of the `<object>` in bytes. -If `-e` is specified, no output, unless the <object> is malformed. +If `-e` is specified, no output, unless the `<object>` is malformed. -If `-p` is specified, the contents of <object> are pretty-printed. +If `-p` is specified, the contents of `<object>` are pretty-printed. -If <type> is specified, the raw (though uncompressed) contents of the <object> +If `<type>` is specified, the raw (though uncompressed) contents of the `<object>` will be returned. BATCH OUTPUT @@ -200,7 +200,7 @@ object, with placeholders of the form `%(atom)` expanded, followed by a newline. The available atoms are: `objectname`:: - The 40-hex object name of the object. + The full hex representation of the object name. `objecttype`:: The type of the object (the same as `cat-file -t` reports). @@ -215,8 +215,9 @@ newline. The available atoms are: `deltabase`:: If the object is stored as a delta on-disk, this expands to the - 40-hex sha1 of the delta base object. Otherwise, expands to the - null sha1 (40 zeroes). See `CAVEATS` below. + full hex representation of the delta base object name. + Otherwise, expands to the null OID (all zeroes). See `CAVEATS` + below. `rest`:: If this atom is used in the output string, input lines are split @@ -235,14 +236,14 @@ newline. For example, `--batch` without a custom format would produce: ------------ -<sha1> SP <type> SP <size> LF +<oid> SP <type> SP <size> LF <contents> LF ------------ Whereas `--batch-check='%(objectname) %(objecttype)'` would produce: ------------ -<sha1> SP <type> LF +<oid> SP <type> LF ------------ If a name is specified on stdin that cannot be resolved to an object in @@ -258,7 +259,7 @@ If a name is specified that might refer to more than one object (an ambiguous sh <object> SP ambiguous LF ------------ -If --follow-symlinks is used, and a symlink in the repository points +If `--follow-symlinks` is used, and a symlink in the repository points outside the repository, then `cat-file` will ignore any custom format and print: @@ -267,11 +268,11 @@ symlink SP <size> LF <symlink> LF ------------ -The symlink will either be absolute (beginning with a /), or relative -to the tree root. For instance, if dir/link points to ../../foo, then -<symlink> will be ../foo. <size> is the size of the symlink in bytes. +The symlink will either be absolute (beginning with a `/`), or relative +to the tree root. For instance, if dir/link points to `../../foo`, then +`<symlink>` will be `../foo`. `<size>` is the size of the symlink in bytes. -If --follow-symlinks is used, the following error messages will be +If `--follow-symlinks` is used, the following error messages will be displayed: ------------ diff --git a/Documentation/git-clone.txt b/Documentation/git-clone.txt index 02d9c19cec..3fe3810f1c 100644 --- a/Documentation/git-clone.txt +++ b/Documentation/git-clone.txt @@ -15,7 +15,7 @@ SYNOPSIS [--dissociate] [--separate-git-dir <git dir>] [--depth <depth>] [--[no-]single-branch] [--no-tags] [--recurse-submodules[=<pathspec>]] [--[no-]shallow-submodules] - [--[no-]remote-submodules] [--jobs <n>] [--sparse] + [--[no-]remote-submodules] [--jobs <n>] [--sparse] [--[no-]reject-shallow] [--filter=<filter>] [--] <repository> [<directory>] @@ -149,6 +149,11 @@ objects from the source repository into a pack in the cloned repository. --no-checkout:: No checkout of HEAD is performed after the clone is complete. +--[no-]reject-shallow:: + Fail if the source repository is a shallow repository. + The 'clone.rejectShallow' configuration variable can be used to + specify the default. + --bare:: Make a 'bare' Git repository. That is, instead of creating `<directory>` and placing the administrative diff --git a/Documentation/git-commit.txt b/Documentation/git-commit.txt index 17150fa7ea..340c5fbb48 100644 --- a/Documentation/git-commit.txt +++ b/Documentation/git-commit.txt @@ -9,12 +9,13 @@ SYNOPSIS -------- [verse] 'git commit' [-a | --interactive | --patch] [-s] [-v] [-u<mode>] [--amend] - [--dry-run] [(-c | -C | --fixup | --squash) <commit>] + [--dry-run] [(-c | -C | --squash) <commit> | --fixup [(amend|reword):]<commit>)] [-F <file> | -m <msg>] [--reset-author] [--allow-empty] [--allow-empty-message] [--no-verify] [-e] [--author=<author>] [--date=<date>] [--cleanup=<mode>] [--[no-]status] [-i | -o] [--pathspec-from-file=<file> [--pathspec-file-nul]] - [-S[<keyid>]] [--] [<pathspec>...] + [(--trailer <token>[(=|:)<value>])...] [-S[<keyid>]] + [--] [<pathspec>...] DESCRIPTION ----------- @@ -86,11 +87,44 @@ OPTIONS Like '-C', but with `-c` the editor is invoked, so that the user can further edit the commit message. ---fixup=<commit>:: - Construct a commit message for use with `rebase --autosquash`. - The commit message will be the subject line from the specified - commit with a prefix of "fixup! ". See linkgit:git-rebase[1] - for details. +--fixup=[(amend|reword):]<commit>:: + Create a new commit which "fixes up" `<commit>` when applied with + `git rebase --autosquash`. Plain `--fixup=<commit>` creates a + "fixup!" commit which changes the content of `<commit>` but leaves + its log message untouched. `--fixup=amend:<commit>` is similar but + creates an "amend!" commit which also replaces the log message of + `<commit>` with the log message of the "amend!" commit. + `--fixup=reword:<commit>` creates an "amend!" commit which + replaces the log message of `<commit>` with its own log message + but makes no changes to the content of `<commit>`. ++ +The commit created by plain `--fixup=<commit>` has a subject +composed of "fixup!" followed by the subject line from <commit>, +and is recognized specially by `git rebase --autosquash`. The `-m` +option may be used to supplement the log message of the created +commit, but the additional commentary will be thrown away once the +"fixup!" commit is squashed into `<commit>` by +`git rebase --autosquash`. ++ +The commit created by `--fixup=amend:<commit>` is similar but its +subject is instead prefixed with "amend!". The log message of +<commit> is copied into the log message of the "amend!" commit and +opened in an editor so it can be refined. When `git rebase +--autosquash` squashes the "amend!" commit into `<commit>`, the +log message of `<commit>` is replaced by the refined log message +from the "amend!" commit. It is an error for the "amend!" commit's +log message to be empty unless `--allow-empty-message` is +specified. ++ +`--fixup=reword:<commit>` is shorthand for `--fixup=amend:<commit> +--only`. It creates an "amend!" commit with only a log message +(ignoring any changes staged in the index). When squashed by `git +rebase --autosquash`, it replaces the log message of `<commit>` +without making any other changes. ++ +Neither "fixup!" nor "amend!" commits change authorship of +`<commit>` when applied by `git rebase --autosquash`. +See linkgit:git-rebase[1] for details. --squash=<commit>:: Construct a commit message for use with `rebase --autosquash`. @@ -166,6 +200,17 @@ The `-m` option is mutually exclusive with `-c`, `-C`, and `-F`. include::signoff-option.txt[] +--trailer <token>[(=|:)<value>]:: + Specify a (<token>, <value>) pair that should be applied as a + trailer. (e.g. `git commit --trailer "Signed-off-by:C O Mitter \ + <committer@example.com>" --trailer "Helped-by:C O Mitter \ + <committer@example.com>"` will add the "Signed-off-by" trailer + and the "Helped-by" trailer to the commit message.) + The `trailer.*` configuration variables + (linkgit:git-interpret-trailers[1]) can be used to define if + a duplicated trailer is omitted, where in the run of trailers + each trailer would appear, and other details. + -n:: --no-verify:: This option bypasses the pre-commit and commit-msg hooks. diff --git a/Documentation/git-config.txt b/Documentation/git-config.txt index 4b4cc5c5e8..5cddadafd2 100644 --- a/Documentation/git-config.txt +++ b/Documentation/git-config.txt @@ -340,6 +340,11 @@ GIT_CONFIG:: Using the "--global" option forces this to ~/.gitconfig. Using the "--system" option forces this to $(prefix)/etc/gitconfig. +GIT_CONFIG_GLOBAL:: +GIT_CONFIG_SYSTEM:: + Take the configuration from the given files instead from global or + system-level configuration. See linkgit:git[1] for details. + GIT_CONFIG_NOSYSTEM:: Whether to skip reading settings from the system-wide $(prefix)/etc/gitconfig file. See linkgit:git[1] for details. diff --git a/Documentation/git-credential.txt b/Documentation/git-credential.txt index 31c81c4c02..206e3c5f40 100644 --- a/Documentation/git-credential.txt +++ b/Documentation/git-credential.txt @@ -159,3 +159,7 @@ empty string. + Components which are missing from the URL (e.g., there is no username in the example above) will be left unset. + +GIT +--- +Part of the linkgit:git[1] suite diff --git a/Documentation/git-cvsserver.txt b/Documentation/git-cvsserver.txt index 1b1c71ad9d..f2e4a47ebe 100644 --- a/Documentation/git-cvsserver.txt +++ b/Documentation/git-cvsserver.txt @@ -24,6 +24,18 @@ Usage: [verse] 'git-cvsserver' [<options>] [pserver|server] [<directory> ...] +DESCRIPTION +----------- + +This application is a CVS emulation layer for Git. + +It is highly functional. However, not all methods are implemented, +and for those methods that are implemented, +not all switches are implemented. + +Testing has been done using both the CLI CVS client, and the Eclipse CVS +plugin. Most functionality works fine with both of these clients. + OPTIONS ------- @@ -57,18 +69,6 @@ access still needs to be enabled by the `gitcvs.enabled` config option unless `--export-all` was given, too. -DESCRIPTION ------------ - -This application is a CVS emulation layer for Git. - -It is highly functional. However, not all methods are implemented, -and for those methods that are implemented, -not all switches are implemented. - -Testing has been done using both the CLI CVS client, and the Eclipse CVS -plugin. Most functionality works fine with both of these clients. - LIMITATIONS ----------- diff --git a/Documentation/git-format-patch.txt b/Documentation/git-format-patch.txt index 3e49bf2210..911da181a1 100644 --- a/Documentation/git-format-patch.txt +++ b/Documentation/git-format-patch.txt @@ -36,11 +36,28 @@ SYNOPSIS DESCRIPTION ----------- -Prepare each commit with its patch in -one file per commit, formatted to resemble UNIX mailbox format. +Prepare each commit with its "patch" in +one "message" per commit, formatted to resemble a UNIX mailbox. The output of this command is convenient for e-mail submission or for use with 'git am'. +A "message" generated by the command consists of three parts: + +* A brief metadata header that begins with `From <commit>` + with a fixed `Mon Sep 17 00:00:00 2001` datestamp to help programs + like "file(1)" to recognize that the file is an output from this + command, fields that record the author identity, the author date, + and the title of the change (taken from the first paragraph of the + commit log message). + +* The second and subsequent paragraphs of the commit log message. + +* The "patch", which is the "diff -p --stat" output (see + linkgit:git-diff[1]) between the commit and its parent. + +The log message and the patch is separated by a line with a +three-dash line. + There are two ways to specify which commits to operate on. 1. A single commit, <since>, specifies that the commits leading @@ -221,6 +238,11 @@ populated with placeholder text. `--subject-prefix` option) has ` v<n>` appended to it. E.g. `--reroll-count=4` may produce `v4-0001-add-makefile.patch` file that has "Subject: [PATCH v4 1/20] Add makefile" in it. + `<n>` does not have to be an integer (e.g. "--reroll-count=4.4", + or "--reroll-count=4rev2" are allowed), but the downside of + using such a reroll-count is that the range-diff/interdiff + with the previous version does not state exactly which + version the new interation is compared against. --to=<email>:: Add a `To:` header to the email headers. This is in addition diff --git a/Documentation/git-grep.txt b/Documentation/git-grep.txt index 4e0ba8234a..3d393fbac1 100644 --- a/Documentation/git-grep.txt +++ b/Documentation/git-grep.txt @@ -38,38 +38,6 @@ are lists of one or more search expressions separated by newline characters. An empty string as search expression matches all lines. -CONFIGURATION -------------- - -grep.lineNumber:: - If set to true, enable `-n` option by default. - -grep.column:: - If set to true, enable the `--column` option by default. - -grep.patternType:: - Set the default matching behavior. Using a value of 'basic', 'extended', - 'fixed', or 'perl' will enable the `--basic-regexp`, `--extended-regexp`, - `--fixed-strings`, or `--perl-regexp` option accordingly, while the - value 'default' will return to the default matching behavior. - -grep.extendedRegexp:: - If set to true, enable `--extended-regexp` option by default. This - option is ignored when the `grep.patternType` option is set to a value - other than 'default'. - -grep.threads:: - Number of grep worker threads to use. If unset (or set to 0), Git will - use as many threads as the number of logical cores available. - -grep.fullName:: - If set to true, enable `--full-name` option by default. - -grep.fallbackToNoIndex:: - If set to true, fall back to git grep --no-index if git grep - is executed outside of a git repository. Defaults to false. - - OPTIONS ------- --cached:: @@ -363,6 +331,38 @@ with multiple threads might perform slower than single threaded if `--textconv` is given and there're too many text conversions. So if you experience low performance in this case, it might be desirable to use `--threads=1`. +CONFIGURATION +------------- + +grep.lineNumber:: + If set to true, enable `-n` option by default. + +grep.column:: + If set to true, enable the `--column` option by default. + +grep.patternType:: + Set the default matching behavior. Using a value of 'basic', 'extended', + 'fixed', or 'perl' will enable the `--basic-regexp`, `--extended-regexp`, + `--fixed-strings`, or `--perl-regexp` option accordingly, while the + value 'default' will return to the default matching behavior. + +grep.extendedRegexp:: + If set to true, enable `--extended-regexp` option by default. This + option is ignored when the `grep.patternType` option is set to a value + other than 'default'. + +grep.threads:: + Number of grep worker threads to use. If unset (or set to 0), Git will + use as many threads as the number of logical cores available. + +grep.fullName:: + If set to true, enable `--full-name` option by default. + +grep.fallbackToNoIndex:: + If set to true, fall back to git grep --no-index if git grep + is executed outside of a git repository. Defaults to false. + + GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-maintenance.txt b/Documentation/git-maintenance.txt index 80ddd33ceb..1e738ad398 100644 --- a/Documentation/git-maintenance.txt +++ b/Documentation/git-maintenance.txt @@ -92,10 +92,8 @@ commit-graph:: prefetch:: The `prefetch` task updates the object directory with the latest objects from all registered remotes. For each remote, a `git fetch` - command is run. The refmap is custom to avoid updating local or remote - branches (those in `refs/heads` or `refs/remotes`). Instead, the - remote refs are stored in `refs/prefetch/<remote>/`. Also, tags are - not updated. + command is run. The configured refspec is modified to place all + requested refs within `refs/prefetch/`. Also, tags are not updated. + This is done to avoid disrupting the remote-tracking branches. The end users expect these refs to stay unmoved unless they initiate a fetch. With prefetch diff --git a/Documentation/git-mktag.txt b/Documentation/git-mktag.txt index 17a2603a60..466a697519 100644 --- a/Documentation/git-mktag.txt +++ b/Documentation/git-mktag.txt @@ -11,14 +11,6 @@ SYNOPSIS [verse] 'git mktag' -OPTIONS -------- - ---strict:: - By default mktag turns on the equivalent of - linkgit:git-fsck[1] `--strict` mode. Use `--no-strict` to - disable it. - DESCRIPTION ----------- @@ -45,6 +37,14 @@ the appropriate `fsck.<msg-id>` varible: git -c fsck.extraHeaderEntry=ignore mktag <my-tag-with-headers +OPTIONS +------- + +--strict:: + By default mktag turns on the equivalent of + linkgit:git-fsck[1] `--strict` mode. Use `--no-strict` to + disable it. + Tag Format ---------- A tag signature file, to be fed to this command's standard input, diff --git a/Documentation/git-multi-pack-index.txt b/Documentation/git-multi-pack-index.txt index eb0caa0439..ffd601bc17 100644 --- a/Documentation/git-multi-pack-index.txt +++ b/Documentation/git-multi-pack-index.txt @@ -9,7 +9,8 @@ git-multi-pack-index - Write and verify multi-pack-indexes SYNOPSIS -------- [verse] -'git multi-pack-index' [--object-dir=<dir>] [--[no-]progress] <subcommand> +'git multi-pack-index' [--object-dir=<dir>] [--[no-]progress] + [--preferred-pack=<pack>] <subcommand> DESCRIPTION ----------- @@ -30,7 +31,16 @@ OPTIONS The following subcommands are available: write:: - Write a new MIDX file. + Write a new MIDX file. The following options are available for + the `write` sub-command: ++ +-- + --preferred-pack=<pack>:: + Optionally specify the tie-breaking pack used when + multiple packs contain the same object. If not given, + ties are broken in favor of the pack with the lowest + mtime. +-- verify:: Verify the contents of the MIDX file. diff --git a/Documentation/git-p4.txt b/Documentation/git-p4.txt index f89e68b424..38e5257b2a 100644 --- a/Documentation/git-p4.txt +++ b/Documentation/git-p4.txt @@ -762,3 +762,7 @@ IMPLEMENTATION DETAILS message indicating the p4 depot location and change number. This line is used by later 'git p4 sync' operations to know which p4 changes are new. + +GIT +--- +Part of the linkgit:git[1] suite diff --git a/Documentation/git-pack-objects.txt b/Documentation/git-pack-objects.txt index f85cb7ea93..25d9fbe37a 100644 --- a/Documentation/git-pack-objects.txt +++ b/Documentation/git-pack-objects.txt @@ -85,6 +85,16 @@ base-name:: reference was included in the resulting packfile. This can be useful to send new tags to native Git clients. +--stdin-packs:: + Read the basenames of packfiles (e.g., `pack-1234abcd.pack`) + from the standard input, instead of object names or revision + arguments. The resulting pack contains all objects listed in the + included packs (those not beginning with `^`), excluding any + objects listed in the excluded packs (beginning with `^`). ++ +Incompatible with `--revs`, or options that imply `--revs` (such as +`--all`), with the exception of `--unpacked`, which is compatible. + --window=<n>:: --depth=<n>:: These two options affect how the objects contained in diff --git a/Documentation/git-push.txt b/Documentation/git-push.txt index ab103c82cf..a953c7c387 100644 --- a/Documentation/git-push.txt +++ b/Documentation/git-push.txt @@ -600,7 +600,7 @@ EXAMPLES `git push origin`:: Without additional configuration, pushes the current branch to - the configured upstream (`remote.origin.merge` configuration + the configured upstream (`branch.<name>.merge` configuration variable) if it has the same name as the current branch, and errors out without pushing otherwise. + diff --git a/Documentation/git-rebase.txt b/Documentation/git-rebase.txt index a0487b5cc5..55af6fd24e 100644 --- a/Documentation/git-rebase.txt +++ b/Documentation/git-rebase.txt @@ -200,12 +200,6 @@ Alternatively, you can undo the 'git rebase' with git rebase --abort -CONFIGURATION -------------- - -include::config/rebase.txt[] -include::config/sequencer.txt[] - OPTIONS ------- --onto <newbase>:: @@ -593,16 +587,17 @@ See also INCOMPATIBLE OPTIONS below. --autosquash:: --no-autosquash:: - When the commit log message begins with "squash! ..." (or - "fixup! ..."), and there is already a commit in the todo list that - matches the same `...`, automatically modify the todo list of rebase - -i so that the commit marked for squashing comes right after the - commit to be modified, and change the action of the moved commit - from `pick` to `squash` (or `fixup`). A commit matches the `...` if - the commit subject matches, or if the `...` refers to the commit's - hash. As a fall-back, partial matches of the commit subject work, - too. The recommended way to create fixup/squash commits is by using - the `--fixup`/`--squash` options of linkgit:git-commit[1]. + When the commit log message begins with "squash! ..." or "fixup! ..." + or "amend! ...", and there is already a commit in the todo list that + matches the same `...`, automatically modify the todo list of + `rebase -i`, so that the commit marked for squashing comes right after + the commit to be modified, and change the action of the moved commit + from `pick` to `squash` or `fixup` or `fixup -C` respectively. A commit + matches the `...` if the commit subject matches, or if the `...` refers + to the commit's hash. As a fall-back, partial matches of the commit + subject work, too. The recommended way to create fixup/amend/squash + commits is by using the `--fixup`, `--fixup=amend:` or `--fixup=reword:` + and `--squash` options respectively of linkgit:git-commit[1]. + If the `--autosquash` option is enabled by default using the configuration variable `rebase.autoSquash`, this option can be @@ -622,6 +617,14 @@ See also INCOMPATIBLE OPTIONS below. --no-reschedule-failed-exec:: Automatically reschedule `exec` commands that failed. This only makes sense in interactive mode (or when an `--exec` option was provided). ++ +Even though this option applies once a rebase is started, it's set for +the whole rebase at the start based on either the +`rebase.rescheduleFailedExec` configuration (see linkgit:git-config[1] +or "CONFIGURATION" below) or whether this option is +provided. Otherwise an explicit `--no-reschedule-failed-exec` at the +start would be overridden by the presence of +`rebase.rescheduleFailedExec=true` configuration. INCOMPATIBLE OPTIONS -------------------- @@ -887,9 +890,17 @@ If you want to fold two or more commits into one, replace the command "pick" for the second and subsequent commits with "squash" or "fixup". If the commits had different authors, the folded commit will be attributed to the author of the first commit. The suggested commit -message for the folded commit is the concatenation of the commit -messages of the first commit and of those with the "squash" command, -but omits the commit messages of commits with the "fixup" command. +message for the folded commit is the concatenation of the first +commit's message with those identified by "squash" commands, omitting the +messages of commits identified by "fixup" commands, unless "fixup -c" +is used. In that case the suggested commit message is only the message +of the "fixup -c" commit, and an editor is opened allowing you to edit +the message. The contents (patch) of the "fixup -c" commit are still +incorporated into the folded commit. If there is more than one "fixup -c" +commit, the message from the final one is used. You can also use +"fixup -C" to get the same behavior as "fixup -c" except without opening +an editor. + 'git rebase' will stop when "pick" has been replaced with "edit" or when a command fails due to merge errors. When you are done editing @@ -1257,6 +1268,12 @@ merge tlsv1.3 merge cmake ------------ +CONFIGURATION +------------- + +include::config/rebase.txt[] +include::config/sequencer.txt[] + BUGS ---- The todo list presented by the deprecated `--preserve-merges --interactive` diff --git a/Documentation/git-repack.txt b/Documentation/git-repack.txt index fbd4b4ae06..317d63cf0d 100644 --- a/Documentation/git-repack.txt +++ b/Documentation/git-repack.txt @@ -165,6 +165,29 @@ depth is 4095. Pass the `--delta-islands` option to `git-pack-objects`, see linkgit:git-pack-objects[1]. +-g=<factor>:: +--geometric=<factor>:: + Arrange resulting pack structure so that each successive pack + contains at least `<factor>` times the number of objects as the + next-largest pack. ++ +`git repack` ensures this by determining a "cut" of packfiles that need +to be repacked into one in order to ensure a geometric progression. It +picks the smallest set of packfiles such that as many of the larger +packfiles (by count of objects contained in that pack) may be left +intact. ++ +Unlike other repack modes, the set of objects to pack is determined +uniquely by the set of packs being "rolled-up"; in other words, the +packs determined to need to be combined in order to restore a geometric +progression. ++ +When `--unpacked` is specified, loose objects are implicitly included in +this "roll-up", without respect to their reachability. This is subject +to change in the future. This option (implying a drastically different +repack mode) is not guaranteed to work with all other combinations of +option to `git repack`). + CONFIGURATION ------------- diff --git a/Documentation/git-rm.txt b/Documentation/git-rm.txt index ab750367fd..26e9b28470 100644 --- a/Documentation/git-rm.txt +++ b/Documentation/git-rm.txt @@ -23,7 +23,9 @@ branch, and no updates to their contents can be staged in the index, though that default behavior can be overridden with the `-f` option. When `--cached` is given, the staged content has to match either the tip of the branch or the file on disk, -allowing the file to be removed from just the index. +allowing the file to be removed from just the index. When +sparse-checkouts are in use (see linkgit:git-sparse-checkout[1]), +`git rm` will only remove paths within the sparse-checkout patterns. OPTIONS diff --git a/Documentation/git-sparse-checkout.txt b/Documentation/git-sparse-checkout.txt index a0eeaeb02e..fdcf43f87c 100644 --- a/Documentation/git-sparse-checkout.txt +++ b/Documentation/git-sparse-checkout.txt @@ -45,6 +45,20 @@ To avoid interfering with other worktrees, it first enables the When `--cone` is provided, the `core.sparseCheckoutCone` setting is also set, allowing for better performance with a limited set of patterns (see 'CONE PATTERN SET' below). ++ +Use the `--[no-]sparse-index` option to toggle the use of the sparse +index format. This reduces the size of the index to be more closely +aligned with your sparse-checkout definition. This can have significant +performance advantages for commands such as `git status` or `git add`. +This feature is still experimental. Some commands might be slower with +a sparse index until they are properly integrated with the feature. ++ +**WARNING:** Using a sparse index requires modifying the index in a way +that is not completely understood by external tools. If you have trouble +with this compatibility, then run `git sparse-checkout init --no-sparse-index` +to rewrite your index to not be sparse. Older versions of Git will not +understand the sparse directory entries index extension and may fail to +interact with your repository until it is disabled. 'set':: Write a set of patterns to the sparse-checkout file, as given as diff --git a/Documentation/git-stash.txt b/Documentation/git-stash.txt index f1197d641b..a8c8c32f1e 100644 --- a/Documentation/git-stash.txt +++ b/Documentation/git-stash.txt @@ -9,7 +9,7 @@ SYNOPSIS -------- [verse] 'git stash' list [<log-options>] -'git stash' show [<diff-options>] [<stash>] +'git stash' show [-u|--include-untracked|--only-untracked] [<diff-options>] [<stash>] 'git stash' drop [-q|--quiet] [<stash>] 'git stash' ( pop | apply ) [--index] [-q|--quiet] [<stash>] 'git stash' branch <branchname> [<stash>] @@ -83,7 +83,7 @@ stash@{1}: On master: 9cc0589... Add git-stash The command takes options applicable to the 'git log' command to control what is shown and how. See linkgit:git-log[1]. -show [<diff-options>] [<stash>]:: +show [-u|--include-untracked|--only-untracked] [<diff-options>] [<stash>]:: Show the changes recorded in the stash entry as a diff between the stashed contents and the commit back when the stash entry was first @@ -91,8 +91,8 @@ show [<diff-options>] [<stash>]:: By default, the command shows the diffstat, but it will accept any format known to 'git diff' (e.g., `git stash show -p stash@{1}` to view the second most recent entry in patch form). - You can use stash.showStat and/or stash.showPatch config variables - to change the default behavior. + You can use stash.showIncludeUntracked, stash.showStat, and + stash.showPatch config variables to change the default behavior. pop [--index] [-q|--quiet] [<stash>]:: @@ -160,10 +160,18 @@ up with `git clean`. -u:: --include-untracked:: - This option is only valid for `push` and `save` commands. +--no-include-untracked:: + When used with the `push` and `save` commands, + all untracked files are also stashed and then cleaned up with + `git clean`. ++ +When used with the `show` command, show the untracked files in the stash +entry as part of the diff. + +--only-untracked:: + This option is only valid for the `show` command. + -All untracked files are also stashed and then cleaned up with -`git clean`. +Show only the untracked files in the stash entry as part of the diff. --index:: This option is only valid for `pop` and `apply` commands. diff --git a/Documentation/git-svn.txt b/Documentation/git-svn.txt index 67b143cc81..d5776ffcfd 100644 --- a/Documentation/git-svn.txt +++ b/Documentation/git-svn.txt @@ -1061,25 +1061,6 @@ with different name spaces. For example: branches = stable/*:refs/remotes/svn/stable/* branches = debug/*:refs/remotes/svn/debug/* -BUGS ----- - -We ignore all SVN properties except svn:executable. Any unhandled -properties are logged to $GIT_DIR/svn/<refname>/unhandled.log - -Renamed and copied directories are not detected by Git and hence not -tracked when committing to SVN. I do not plan on adding support for -this as it's quite difficult and time-consuming to get working for all -the possible corner cases (Git doesn't do it, either). Committing -renamed and copied files is fully supported if they're similar enough -for Git to detect them. - -In SVN, it is possible (though discouraged) to commit changes to a tag -(because a tag is just a directory copy, thus technically the same as a -branch). When cloning an SVN repository, 'git svn' cannot know if such a -commit to a tag will happen in the future. Thus it acts conservatively -and imports all SVN tags as branches, prefixing the tag name with 'tags/'. - CONFIGURATION ------------- @@ -1166,6 +1147,25 @@ $GIT_DIR/svn/\**/.rev_map.*:: if it is missing or not up to date. 'git svn reset' automatically rewinds it. +BUGS +---- + +We ignore all SVN properties except svn:executable. Any unhandled +properties are logged to $GIT_DIR/svn/<refname>/unhandled.log + +Renamed and copied directories are not detected by Git and hence not +tracked when committing to SVN. I do not plan on adding support for +this as it's quite difficult and time-consuming to get working for all +the possible corner cases (Git doesn't do it, either). Committing +renamed and copied files is fully supported if they're similar enough +for Git to detect them. + +In SVN, it is possible (though discouraged) to commit changes to a tag +(because a tag is just a directory copy, thus technically the same as a +branch). When cloning an SVN repository, 'git svn' cannot know if such a +commit to a tag will happen in the future. Thus it acts conservatively +and imports all SVN tags as branches, prefixing the tag name with 'tags/'. + SEE ALSO -------- linkgit:git-rebase[1] diff --git a/Documentation/git.txt b/Documentation/git.txt index 3a9c44987f..6dd241ef83 100644 --- a/Documentation/git.txt +++ b/Documentation/git.txt @@ -13,7 +13,7 @@ SYNOPSIS [--exec-path[=<path>]] [--html-path] [--man-path] [--info-path] [-p|--paginate|-P|--no-pager] [--no-replace-objects] [--bare] [--git-dir=<path>] [--work-tree=<path>] [--namespace=<name>] - [--super-prefix=<path>] [--config-env <name>=<envvar>] + [--super-prefix=<path>] [--config-env=<name>=<envvar>] <command> [<args>] DESCRIPTION @@ -670,6 +670,16 @@ for further details. If this environment variable is set to `0`, git will not prompt on the terminal (e.g., when asking for HTTP authentication). +`GIT_CONFIG_GLOBAL`:: +`GIT_CONFIG_SYSTEM`:: + Take the configuration from the given files instead from global or + system-level configuration files. If `GIT_CONFIG_SYSTEM` is set, the + system config file defined at build time (usually `/etc/gitconfig`) + will not be read. Likewise, if `GIT_CONFIG_GLOBAL` is set, neither + `$HOME/.gitconfig` nor `$XDG_CONFIG_HOME/git/config` will be read. Can + be set to `/dev/null` to skip reading configuration files of the + respective level. + `GIT_CONFIG_NOSYSTEM`:: Whether to skip reading settings from the system-wide `$(prefix)/etc/gitconfig` file. This environment variable can diff --git a/Documentation/gitattributes.txt b/Documentation/gitattributes.txt index e84e104f93..cfcfa800c2 100644 --- a/Documentation/gitattributes.txt +++ b/Documentation/gitattributes.txt @@ -845,6 +845,8 @@ patterns are available: - `rust` suitable for source code in the Rust language. +- `scheme` suitable for source code in the Scheme language. + - `tex` suitable for source code for LaTeX documents. @@ -1174,7 +1176,8 @@ tag then no replacement will be done. The placeholders are the same as those for the option `--pretty=format:` of linkgit:git-log[1], except that they need to be wrapped like this: `$Format:PLACEHOLDERS$` in the file. E.g. the string `$Format:%H$` will be replaced by the -commit hash. +commit hash. However, only one `%(describe)` placeholder is expanded +per archive to avoid denial-of-service attacks. Packing objects diff --git a/Documentation/gitdiffcore.txt b/Documentation/gitdiffcore.txt index 1c7269655f..0d57f86abc 100644 --- a/Documentation/gitdiffcore.txt +++ b/Documentation/gitdiffcore.txt @@ -187,7 +187,7 @@ mark a file pair as a rename and stop considering other candidates for better matches. At most, one comparison is done per file in this preliminary pass; so if there are several remaining ext.txt files throughout the directory hierarchy after exact rename detection, this -preliminary step will be skipped for those files. +preliminary step may be skipped for those files. Note. When the "-C" option is used with `--find-copies-harder` option, 'git diff-{asterisk}' commands feed unmodified filepairs to diff --git a/Documentation/githooks.txt b/Documentation/githooks.txt index 1f3b57d04d..b51959ff94 100644 --- a/Documentation/githooks.txt +++ b/Documentation/githooks.txt @@ -138,7 +138,7 @@ given); `template` (if a `-t` option was given or the configuration option `commit.template` is set); `merge` (if the commit is a merge or a `.git/MERGE_MSG` file exists); `squash` (if a `.git/SQUASH_MSG` file exists); or `commit`, followed by -a commit SHA-1 (if a `-c`, `-C` or `--amend` option was given). +a commit object name (if a `-c`, `-C` or `--amend` option was given). If the exit status is non-zero, `git commit` will abort. @@ -231,19 +231,19 @@ named remote is not being used both values will be the same. Information about what is to be pushed is provided on the hook's standard input with lines of the form: - <local ref> SP <local sha1> SP <remote ref> SP <remote sha1> LF + <local ref> SP <local object name> SP <remote ref> SP <remote object name> LF For instance, if the command +git push origin master:foreign+ were run the hook would receive a line like the following: refs/heads/master 67890 refs/heads/foreign 12345 -although the full, 40-character SHA-1s would be supplied. If the foreign ref -does not yet exist the `<remote SHA-1>` will be 40 `0`. If a ref is to be -deleted, the `<local ref>` will be supplied as `(delete)` and the `<local -SHA-1>` will be 40 `0`. If the local commit was specified by something other -than a name which could be expanded (such as `HEAD~`, or a SHA-1) it will be -supplied as it was originally given. +although the full object name would be supplied. If the foreign ref does not +yet exist the `<remote object name>` will be the all-zeroes object name. If a +ref is to be deleted, the `<local ref>` will be supplied as `(delete)` and the +`<local object name>` will be the all-zeroes object name. If the local commit +was specified by something other than a name which could be expanded (such as +`HEAD~`, or an object name) it will be supplied as it was originally given. If this hook exits with a non-zero status, `git push` will abort without pushing anything. Information about why the push is rejected may be sent @@ -268,7 +268,7 @@ input a line of the format: where `<old-value>` is the old object name stored in the ref, `<new-value>` is the new object name to be stored in the ref and `<ref-name>` is the full name of the ref. -When creating a new ref, `<old-value>` is 40 `0`. +When creating a new ref, `<old-value>` is the all-zeroes object name. If the hook exits with non-zero status, none of the refs will be updated. If the hook exits with zero, updating of individual refs can @@ -473,7 +473,8 @@ reference-transaction This hook is invoked by any Git command that performs reference updates. It executes whenever a reference transaction is prepared, -committed or aborted and may thus get called multiple times. +committed or aborted and may thus get called multiple times. The hook +does not cover symbolic references (but that may change in the future). The hook takes exactly one argument, which is the current state the given reference transaction is in: @@ -492,6 +493,14 @@ receives on standard input a line of the format: <old-value> SP <new-value> SP <ref-name> LF +where `<old-value>` is the old object name passed into the reference +transaction, `<new-value>` is the new object name to be stored in the +ref and `<ref-name>` is the full name of the ref. When force updating +the reference regardless of its current value or when the reference is +to be created anew, `<old-value>` is the all-zeroes object name. To +distinguish these cases, you can inspect the current value of +`<ref-name>` via `git rev-parse`. + The exit status of the hook is ignored for any state except for the "prepared" state. In the "prepared" state, a non-zero exit status will cause the transaction to be aborted. The hook will not be called with @@ -550,7 +559,7 @@ command-dependent arguments may be passed in the future. The hook receives a list of the rewritten commits on stdin, in the format - <old-sha1> SP <new-sha1> [ SP <extra-info> ] LF + <old-object-name> SP <new-object-name> [ SP <extra-info> ] LF The 'extra-info' is again command-dependent. If it is empty, the preceding SP is also omitted. Currently, no commands pass any @@ -566,7 +575,7 @@ rebase:: For the 'squash' and 'fixup' operation, all commits that were squashed are listed as being rewritten to the squashed commit. This means that there will be several lines sharing the same - 'new-sha1'. + 'new-object-name'. + The commits are guaranteed to be listed in the order that they were processed by rebase. diff --git a/Documentation/gitignore.txt b/Documentation/gitignore.txt index d47b1ae296..5751603b13 100644 --- a/Documentation/gitignore.txt +++ b/Documentation/gitignore.txt @@ -153,7 +153,7 @@ EXAMPLES -------- - The pattern `hello.*` matches any file or folder - whose name begins with `hello`. If one wants to restrict + whose name begins with `hello.`. If one wants to restrict this only to the directory and not in its subdirectories, one can prepend the pattern with a slash, i.e. `/hello.*`; the pattern now matches `hello.txt`, `hello.c` but not diff --git a/Documentation/gitnamespaces.txt b/Documentation/gitnamespaces.txt index b614969ad2..1c8d2ecc35 100644 --- a/Documentation/gitnamespaces.txt +++ b/Documentation/gitnamespaces.txt @@ -62,3 +62,7 @@ git clone ext::'git --namespace=foo %s /tmp/prefixed.git' ---------- include::transfer-data-leaks.txt[] + +GIT +--- +Part of the linkgit:git[1] suite diff --git a/Documentation/gitweb.conf.txt b/Documentation/gitweb.conf.txt index 7963a79ba9..34b1d6e224 100644 --- a/Documentation/gitweb.conf.txt +++ b/Documentation/gitweb.conf.txt @@ -751,6 +751,17 @@ default font sizes or lineheights are changed (e.g. via adding extra CSS stylesheet in `@stylesheets`), it may be appropriate to change these values. +email-privacy:: + Redact e-mail addresses from the generated HTML, etc. content. + This obscures e-mail addresses retrieved from the author/committer + and comment sections of the Git log. + It is meant to hinder web crawlers that harvest and abuse addresses. + Such crawlers may not respect robots.txt. + Note that users and user tools also see the addresses as redacted. + If Gitweb is not the final step in a workflow then subsequent steps + may misbehave because of the redacted information they receive. + Disabled by default. + highlight:: Server-side syntax highlight support in "blob" view. It requires `$highlight_bin` program to be available (see the description of diff --git a/Documentation/howto/coordinate-embargoed-releases.txt b/Documentation/howto/coordinate-embargoed-releases.txt new file mode 100644 index 0000000000..601aae88e9 --- /dev/null +++ b/Documentation/howto/coordinate-embargoed-releases.txt @@ -0,0 +1,131 @@ +Content-type: text/asciidoc +Abstract: When a critical vulnerability is discovered and fixed, we follow this + script to coordinate a public release. + +How we coordinate embargoed releases +==================================== + +To protect Git users from critical vulnerabilities, we do not just release +fixed versions like regular maintenance releases. Instead, we coordinate +releases with packagers, keeping the fixes under an embargo until the release +date. That way, users will have a chance to upgrade on that date, no matter +what Operating System or distribution they run. + +Open a Security Advisory draft +------------------------------ + +The first step is to https://github.com/git/git/security/advisories/new[open an +advisory]. Technically, it is not necessary, but it is convenient and saves a +bit of hassle. This advisory can also be used to obtain the CVE number and it +will give us a private fork associated with it that can be used to collaborate +on a fix. + +Release date of the embargoed version +------------------------------------- + +If the vulnerability affects Windows users, we want to have our friends over at +Visual Studio on board. This means we need to target a "Patch Tuesday" (i.e. a +second Tuesday of the month), at the minimum three weeks from heads-up to +coordinated release. + +If the vulnerability affects the server side, or can benefit from scans on the +server side (i.e. if `git fsck` can detect an attack), it is important to give +all involved Git repository hosting sites enough time to scan all of those +repositories. + +Notifying the Linux distributions +--------------------------------- + +At most two weeks before release date, we need to send a notification to +distros@vs.openwall.org, preferably less than 7 days before the release date. +This will reach most (all?) Linux distributions. See an example below, and the +guidelines for this mailing list at +https://oss-security.openwall.org/wiki/mailing-lists/distros#how-to-use-the-lists[here]. + +Once the version has been published, we send a note about that to oss-security. +As an example, see https://www.openwall.com/lists/oss-security/2019/12/13/1[the +v2.24.1 mail]; +https://oss-security.openwall.org/wiki/mailing-lists/oss-security[Here] are +their guidelines. + +The mail to oss-security should also describe the exploit, and give credit to +the reporter(s): security researchers still receive too little respect for the +invaluable service they provide, and public credit goes a long way to keep them +paid by their respective organizations. + +Technically, describing any exploit can be delayed up to 7 days, but we usually +refrain from doing that, including it right away. + +As a courtesy we typically attach a Git bundle (as `.tar.xz` because the list +will drop `.bundle` attachments) in the mail to distros@ so that the involved +parties can take care of integrating/backporting them. This bundle is typically +created using a command like this: + + git bundle create cve-xxx.bundle ^origin/master vA.B.C vD.E.F + tar cJvf cve-xxx.bundle.tar.xz cve-xxx.bundle + +Example mail to distros@vs.openwall.org +--------------------------------------- + +.... +To: distros@vs.openwall.org +Cc: git-security@googlegroups.com, <other people involved in the report/fix> +Subject: [vs] Upcoming Git security fix release + +Team, + +The Git project will release new versions on <date> at 10am Pacific Time or +soon thereafter. I have attached a Git bundle (embedded in a `.tar.xz` to avoid +it being dropped) which you can fetch into a clone of +https://github.com/git/git via `git fetch --tags /path/to/cve-xxx.bundle`, +containing the tags for versions <versions>. + +You can verify with `git tag -v <tag>` that the versions were signed by +the Git maintainer, using the same GPG key as e.g. v2.24.0. + +Please use these tags to prepare `git` packages for your various +distributions, using the appropriate tagged versions. The added test cases +help verify the correctness. + +The addressed issues are: + +<list of CVEs with a short description, typically copy/pasted from Git's +release notes, usually demo exploit(s), too> + +Credit for finding the vulnerability goes to <reporter>, credit for fixing +it goes to <developer>. + +Thanks, +<name> + +.... + +Example mail to oss-security@lists.openwall.com +----------------------------------------------- + +.... +To: oss-security@lists.openwall.com +Cc: git-security@googlegroups.com, <other people involved in the report/fix> +Subject: git: <copy from security advisory> + +Team, + +The Git project released new versions on <date>, addressing <CVE>. + +All supported platforms are affected in one way or another, and all Git +versions all the way back to <version> are affected. The fixed versions are: +<versions>. + +Link to the announcement: <link to lore.kernel.org/git> + +We highly recommend to upgrade. + +The addressed issues are: +* <list of CVEs and their explanations, along with demo exploits> + +Credit for finding the vulnerability goes to <reporter>, credit for fixing +it goes to <developer>. + +Thanks, +<name> +.... diff --git a/Documentation/lint-gitlink.perl b/Documentation/lint-gitlink.perl index 476cc30b83..b22a367844 100755 --- a/Documentation/lint-gitlink.perl +++ b/Documentation/lint-gitlink.perl @@ -1,71 +1,67 @@ #!/usr/bin/perl -use File::Find; -use Getopt::Long; +use strict; +use warnings; -my $basedir = "."; -GetOptions("basedir=s" => \$basedir) - or die("Cannot parse command line arguments\n"); +# Parse arguments, a simple state machine for input like: +# +# howto/*.txt config/*.txt --section=1 git.txt git-add.txt [...] --to-lint git-add.txt a-file.txt [...] +my %TXT; +my %SECTION; +my $section; +my $lint_these = 0; +for my $arg (@ARGV) { + if (my ($sec) = $arg =~ /^--section=(\d+)$/s) { + $section = $sec; + next; + } -my $found_errors = 0; + my ($name) = $arg =~ /^(.*?)\.txt$/s; + unless (defined $section) { + $TXT{$name} = $arg; + next; + } -sub report { - my ($where, $what, $error) = @_; - print "$where: $error: $what\n"; - $found_errors = 1; + $SECTION{$name} = $section; } -sub grab_section { - my ($page) = @_; - open my $fh, "<", "$basedir/$page.txt"; - my $firstline = <$fh>; - chomp $firstline; - close $fh; - my ($section) = ($firstline =~ /.*\((\d)\)$/); - return $section; +my $exit_code = 0; +sub report { + my ($pos, $line, $target, $msg) = @_; + substr($line, $pos) = "' <-- HERE"; + $line =~ s/^\s+//; + print "$ARGV:$.: error: $target: $msg, shown with 'HERE' below:\n"; + print "$ARGV:$.:\t'$line\n"; + $exit_code = 1; } -sub lint { - my ($file) = @_; - open my $fh, "<", $file - or return; - while (<$fh>) { - my $where = "$file:$."; - while (s/linkgit:((.*?)\[(\d)\])//) { - my ($target, $page, $section) = ($1, $2, $3); +@ARGV = sort values %TXT; +die "BUG: Nothing to process!" unless @ARGV; +while (<>) { + my $line = $_; + while ($line =~ m/linkgit:((.*?)\[(\d)\])/g) { + my $pos = pos $line; + my ($target, $page, $section) = ($1, $2, $3); - # De-AsciiDoc - $page =~ s/{litdd}/--/g; + # De-AsciiDoc + $page =~ s/{litdd}/--/g; - if ($page !~ /^git/) { - report($where, $target, "nongit link"); - next; - } - if (! -f "$basedir/$page.txt") { - report($where, $target, "no such source"); - next; - } - $real_section = grab_section($page); - if ($real_section != $section) { - report($where, $target, - "wrong section (should be $real_section)"); - next; - } + if (!exists $TXT{$page}) { + report($pos, $line, $target, "link outside of our own docs"); + next; + } + if (!exists $SECTION{$page}) { + report($pos, $line, $target, "link outside of our sectioned docs"); + next; + } + my $real_section = $SECTION{$page}; + if ($section != $SECTION{$page}) { + report($pos, $line, $target, "wrong section (should be $real_section)"); + next; } } - close $fh; -} - -sub lint_it { - lint($File::Find::name) if -f && /\.txt$/; -} - -if (!@ARGV) { - find({ wanted => \&lint_it, no_chdir => 1 }, $basedir); -} else { - for (@ARGV) { - lint($_); - } + # this resets our $. for each file + close ARGV if eof; } -exit $found_errors; +exit $exit_code; diff --git a/Documentation/lint-man-end-blurb.perl b/Documentation/lint-man-end-blurb.perl new file mode 100755 index 0000000000..d69312e5db --- /dev/null +++ b/Documentation/lint-man-end-blurb.perl @@ -0,0 +1,24 @@ +#!/usr/bin/perl + +use strict; +use warnings; + +my $exit_code = 0; +sub report { + my ($target, $msg) = @_; + print "error: $target: $msg\n"; + $exit_code = 1; +} + +local $/; +while (my $slurp = <>) { + report($ARGV, "has no 'Part of the linkgit:git[1] suite' end blurb") + unless $slurp =~ m[ + ^GIT\n + ---\n + \QPart of the linkgit:git[1] suite\E \n + \z + ]mx; +} + +exit $exit_code; diff --git a/Documentation/lint-man-section-order.perl b/Documentation/lint-man-section-order.perl new file mode 100755 index 0000000000..b05f9156dd --- /dev/null +++ b/Documentation/lint-man-section-order.perl @@ -0,0 +1,105 @@ +#!/usr/bin/perl + +use strict; +use warnings; + +my %SECTIONS; +{ + my $order = 0; + %SECTIONS = ( + 'NAME' => { + required => 1, + order => $order++, + }, + 'SYNOPSIS' => { + required => 1, + order => $order++, + }, + 'DESCRIPTION' => { + required => 1, + order => $order++, + }, + 'OPTIONS' => { + order => $order++, + required => 0, + }, + 'CONFIGURATION' => { + order => $order++, + }, + 'BUGS' => { + order => $order++, + }, + 'SEE ALSO' => { + order => $order++, + }, + 'GIT' => { + required => 1, + order => $order++, + }, + ); +} +my $SECTION_RX = do { + my ($names) = join "|", keys %SECTIONS; + qr/^($names)$/s; +}; + +my $exit_code = 0; +sub report { + my ($msg) = @_; + print "$ARGV:$.: $msg\n"; + $exit_code = 1; +} + +my $last_was_section; +my @actual_order; +while (my $line = <>) { + chomp $line; + if ($line =~ $SECTION_RX) { + push @actual_order => $line; + $last_was_section = 1; + # Have no "last" section yet, processing NAME + next if @actual_order == 1; + + my @expected_order = sort { + $SECTIONS{$a}->{order} <=> $SECTIONS{$b}->{order} + } @actual_order; + + my $expected_last = $expected_order[-2]; + my $actual_last = $actual_order[-2]; + if ($actual_last ne $expected_last) { + report("section '$line' incorrectly ordered, comes after '$actual_last'"); + } + next; + } + if ($last_was_section) { + my $last_section = $actual_order[-1]; + if (length $last_section ne length $line) { + report("dashes under '$last_section' should match its length!"); + } + if ($line !~ /^-+$/) { + report("dashes under '$last_section' should be '-' dashes!"); + } + $last_was_section = 0; + } + + if (eof) { + # We have both a hash and an array to consider, for + # convenience + my %actual_sections; + @actual_sections{@actual_order} = (); + + for my $section (sort keys %SECTIONS) { + next if !$SECTIONS{$section}->{required} or exists $actual_sections{$section}; + report("has no required '$section' section!"); + } + + # Reset per-file state + { + @actual_order = (); + # this resets our $. for each file + close ARGV; + } + } +} + +exit $exit_code; diff --git a/Documentation/pretty-formats.txt b/Documentation/pretty-formats.txt index 6b59e28d44..cd697f508c 100644 --- a/Documentation/pretty-formats.txt +++ b/Documentation/pretty-formats.txt @@ -190,6 +190,8 @@ The placeholders are: '%ai':: author date, ISO 8601-like format '%aI':: author date, strict ISO 8601 format '%as':: author date, short format (`YYYY-MM-DD`) +'%ah':: author date, human style (like the `--date=human` option of + linkgit:git-rev-list[1]) '%cn':: committer name '%cN':: committer name (respecting .mailmap, see linkgit:git-shortlog[1] or linkgit:git-blame[1]) @@ -206,8 +208,23 @@ The placeholders are: '%ci':: committer date, ISO 8601-like format '%cI':: committer date, strict ISO 8601 format '%cs':: committer date, short format (`YYYY-MM-DD`) +'%ch':: committer date, human style(like the `--date=human` option of + linkgit:git-rev-list[1]) '%d':: ref names, like the --decorate option of linkgit:git-log[1] '%D':: ref names without the " (", ")" wrapping. +'%(describe[:options])':: human-readable name, like + linkgit:git-describe[1]; empty string for + undescribable commits. The `describe` string + may be followed by a colon and zero or more + comma-separated options. Descriptions can be + inconsistent when tags are added or removed at + the same time. ++ +** 'match=<pattern>': Only consider tags matching the given + `glob(7)` pattern, excluding the "refs/tags/" prefix. +** 'exclude=<pattern>': Do not consider tags matching the given + `glob(7)` pattern, excluding the "refs/tags/" prefix. + '%S':: ref name given on the command line by which the commit was reached (like `git log --source`), only works with `git log` '%e':: encoding diff --git a/Documentation/rev-list-options.txt b/Documentation/rev-list-options.txt index b1c8f86c6e..5bf2a85f69 100644 --- a/Documentation/rev-list-options.txt +++ b/Documentation/rev-list-options.txt @@ -892,6 +892,9 @@ or units. n may be zero. The suffixes k, m, and g can be used to name units in KiB, MiB, or GiB. For example, 'blob:limit=1k' is the same as 'blob:limit=1024'. + +The form '--filter=object:type=(tag|commit|tree|blob)' omits all objects +which are not of the requested type. ++ The form '--filter=sparse:oid=<blob-ish>' uses a sparse-checkout specification contained in the blob (or blob-expression) '<blob-ish>' to omit blobs that would not be not required for a sparse checkout on @@ -930,6 +933,11 @@ equivalent. --no-filter:: Turn off any previous `--filter=` argument. +--filter-provided-objects:: + Filter the list of explicitly provided objects, which would otherwise + always be printed even if they did not match any of the filters. Only + useful with `--filter=`. + --filter-print-omitted:: Only useful with `--filter=`; prints a list of the objects omitted by the filter. Object IDs are prefixed with a ``~'' character. diff --git a/Documentation/technical/api-error-handling.txt b/Documentation/technical/api-error-handling.txt index ceeedd485c..8be4f4d0d6 100644 --- a/Documentation/technical/api-error-handling.txt +++ b/Documentation/technical/api-error-handling.txt @@ -1,8 +1,11 @@ Error reporting in git ====================== -`die`, `usage`, `error`, and `warning` report errors of various -kinds. +`BUG`, `die`, `usage`, `error`, and `warning` report errors of +various kinds. + +- `BUG` is for failed internal assertions that should never happen, + i.e. a bug in git itself. - `die` is for fatal application errors. It prints a message to the user and exits with status 128. @@ -20,6 +23,9 @@ kinds. without running into too many problems. Like `error`, it returns -1 after reporting the situation to the caller. +These reports will be logged via the trace2 facility. See the "error" +event in link:api-trace2.txt[trace2 API]. + Customizable error handlers --------------------------- diff --git a/Documentation/technical/api-simple-ipc.txt b/Documentation/technical/api-simple-ipc.txt new file mode 100644 index 0000000000..d79ad323e6 --- /dev/null +++ b/Documentation/technical/api-simple-ipc.txt @@ -0,0 +1,105 @@ +Simple-IPC API +============== + +The Simple-IPC API is a collection of `ipc_` prefixed library routines +and a basic communication protocol that allow an IPC-client process to +send an application-specific IPC-request message to an IPC-server +process and receive an application-specific IPC-response message. + +Communication occurs over a named pipe on Windows and a Unix domain +socket on other platforms. IPC-clients and IPC-servers rendezvous at +a previously agreed-to application-specific pathname (which is outside +the scope of this design) that is local to the computer system. + +The IPC-server routines within the server application process create a +thread pool to listen for connections and receive request messages +from multiple concurrent IPC-clients. When received, these messages +are dispatched up to the server application callbacks for handling. +IPC-server routines then incrementally relay responses back to the +IPC-client. + +The IPC-client routines within a client application process connect +to the IPC-server and send a request message and wait for a response. +When received, the response is returned back the caller. + +For example, the `fsmonitor--daemon` feature will be built as a server +application on top of the IPC-server library routines. It will have +threads watching for file system events and a thread pool waiting for +client connections. Clients, such as `git status` will request a list +of file system events since a point in time and the server will +respond with a list of changed files and directories. The formats of +the request and response are application-specific; the IPC-client and +IPC-server routines treat them as opaque byte streams. + + +Comparison with sub-process model +--------------------------------- + +The Simple-IPC mechanism differs from the existing `sub-process.c` +model (Documentation/technical/long-running-process-protocol.txt) and +used by applications like Git-LFS. In the LFS-style sub-process model +the helper is started by the foreground process, communication happens +via a pair of file descriptors bound to the stdin/stdout of the +sub-process, the sub-process only serves the current foreground +process, and the sub-process exits when the foreground process +terminates. + +In the Simple-IPC model the server is a very long-running service. It +can service many clients at the same time and has a private socket or +named pipe connection to each active client. It might be started +(on-demand) by the current client process or it might have been +started by a previous client or by the OS at boot time. The server +process is not associated with a terminal and it persists after +clients terminate. Clients do not have access to the stdin/stdout of +the server process and therefore must communicate over sockets or +named pipes. + + +Server startup and shutdown +--------------------------- + +How an application server based upon IPC-server is started is also +outside the scope of the Simple-IPC design and is a property of the +application using it. For example, the server might be started or +restarted during routine maintenance operations, or it might be +started as a system service during the system boot-up sequence, or it +might be started on-demand by a foreground Git command when needed. + +Similarly, server shutdown is a property of the application using +the simple-ipc routines. For example, the server might decide to +shutdown when idle or only upon explicit request. + + +Simple-IPC protocol +------------------- + +The Simple-IPC protocol consists of a single request message from the +client and an optional response message from the server. Both the +client and server messages are unlimited in length and are terminated +with a flush packet. + +The pkt-line routines (Documentation/technical/protocol-common.txt) +are used to simplify buffer management during message generation, +transmission, and reception. A flush packet is used to mark the end +of the message. This allows the sender to incrementally generate and +transmit the message. It allows the receiver to incrementally receive +the message in chunks and to know when they have received the entire +message. + +The actual byte format of the client request and server response +messages are application specific. The IPC layer transmits and +receives them as opaque byte buffers without any concern for the +content within. It is the job of the calling application layer to +understand the contents of the request and response messages. + + +Summary +------- + +Conceptually, the Simple-IPC protocol is similar to an HTTP REST +request. Clients connect, make an application-specific and +stateless request, receive an application-specific +response, and disconnect. It is a one round trip facility for +querying the server. The Simple-IPC routines hide the socket, +named pipe, and thread pool details and allow the application +layer to focus on the application at hand. diff --git a/Documentation/technical/api-trace2.txt b/Documentation/technical/api-trace2.txt index c65ffafc48..3f52f981a2 100644 --- a/Documentation/technical/api-trace2.txt +++ b/Documentation/technical/api-trace2.txt @@ -465,7 +465,7 @@ completed.) ------------ `"error"`:: - This event is emitted when one of the `error()`, `die()`, + This event is emitted when one of the `BUG()`, `error()`, `die()`, `warning()`, or `usage()` functions are called. + ------------ diff --git a/Documentation/technical/index-format.txt b/Documentation/technical/index-format.txt index d363a71c37..65da0daaa5 100644 --- a/Documentation/technical/index-format.txt +++ b/Documentation/technical/index-format.txt @@ -44,6 +44,13 @@ Git index format localization, no special casing of directory separator '/'). Entries with the same name are sorted by their stage field. + An index entry typically represents a file. However, if sparse-checkout + is enabled in cone mode (`core.sparseCheckoutCone` is enabled) and the + `extensions.sparseIndex` extension is enabled, then the index may + contain entries for directories outside of the sparse-checkout definition. + These entries have mode `040000`, include the `SKIP_WORKTREE` bit, and + the path ends in a directory separator. + 32-bit ctime seconds, the last time a file's metadata changed this is stat(2) data @@ -385,3 +392,15 @@ The remaining data of each directory block is grouped by type: in this block of entries. - 32-bit count of cache entries in this block + +== Sparse Directory Entries + + When using sparse-checkout in cone mode, some entire directories within + the index can be summarized by pointing to a tree object instead of the + entire expanded list of paths within that tree. An index containing such + entries is a "sparse index". Index format versions 4 and less were not + implemented with such entries in mind. Thus, for these versions, an + index containing sparse directory entries will include this extension + with signature { 's', 'd', 'i', 'r' }. Like the split-index extension, + tools should avoid interacting with a sparse index unless they understand + this extension. diff --git a/Documentation/technical/multi-pack-index.txt b/Documentation/technical/multi-pack-index.txt index e8e377a59f..fb688976c4 100644 --- a/Documentation/technical/multi-pack-index.txt +++ b/Documentation/technical/multi-pack-index.txt @@ -43,8 +43,9 @@ Design Details a change in format. - The MIDX keeps only one record per object ID. If an object appears - in multiple packfiles, then the MIDX selects the copy in the most- - recently modified packfile. + in multiple packfiles, then the MIDX selects the copy in the + preferred packfile, otherwise selecting from the most-recently + modified packfile. - If there exist packfiles in the pack directory not registered in the MIDX, then those packfiles are loaded into the `packed_git` diff --git a/Documentation/technical/pack-format.txt b/Documentation/technical/pack-format.txt index 1faa949bf6..8d2f42f29e 100644 --- a/Documentation/technical/pack-format.txt +++ b/Documentation/technical/pack-format.txt @@ -379,3 +379,86 @@ CHUNK DATA: TRAILER: Index checksum of the above contents. + +== multi-pack-index reverse indexes + +Similar to the pack-based reverse index, the multi-pack index can also +be used to generate a reverse index. + +Instead of mapping between offset, pack-, and index position, this +reverse index maps between an object's position within the MIDX, and +that object's position within a pseudo-pack that the MIDX describes +(i.e., the ith entry of the multi-pack reverse index holds the MIDX +position of ith object in pseudo-pack order). + +To clarify the difference between these orderings, consider a multi-pack +reachability bitmap (which does not yet exist, but is what we are +building towards here). Each bit needs to correspond to an object in the +MIDX, and so we need an efficient mapping from bit position to MIDX +position. + +One solution is to let bits occupy the same position in the oid-sorted +index stored by the MIDX. But because oids are effectively random, their +resulting reachability bitmaps would have no locality, and thus compress +poorly. (This is the reason that single-pack bitmaps use the pack +ordering, and not the .idx ordering, for the same purpose.) + +So we'd like to define an ordering for the whole MIDX based around +pack ordering, which has far better locality (and thus compresses more +efficiently). We can think of a pseudo-pack created by the concatenation +of all of the packs in the MIDX. E.g., if we had a MIDX with three packs +(a, b, c), with 10, 15, and 20 objects respectively, we can imagine an +ordering of the objects like: + + |a,0|a,1|...|a,9|b,0|b,1|...|b,14|c,0|c,1|...|c,19| + +where the ordering of the packs is defined by the MIDX's pack list, +and then the ordering of objects within each pack is the same as the +order in the actual packfile. + +Given the list of packs and their counts of objects, you can +naïvely reconstruct that pseudo-pack ordering (e.g., the object at +position 27 must be (c,1) because packs "a" and "b" consumed 25 of the +slots). But there's a catch. Objects may be duplicated between packs, in +which case the MIDX only stores one pointer to the object (and thus we'd +want only one slot in the bitmap). + +Callers could handle duplicates themselves by reading objects in order +of their bit-position, but that's linear in the number of objects, and +much too expensive for ordinary bitmap lookups. Building a reverse index +solves this, since it is the logical inverse of the index, and that +index has already removed duplicates. But, building a reverse index on +the fly can be expensive. Since we already have an on-disk format for +pack-based reverse indexes, let's reuse it for the MIDX's pseudo-pack, +too. + +Objects from the MIDX are ordered as follows to string together the +pseudo-pack. Let `pack(o)` return the pack from which `o` was selected +by the MIDX, and define an ordering of packs based on their numeric ID +(as stored by the MIDX). Let `offset(o)` return the object offset of `o` +within `pack(o)`. Then, compare `o1` and `o2` as follows: + + - If one of `pack(o1)` and `pack(o2)` is preferred and the other + is not, then the preferred one sorts first. ++ +(This is a detail that allows the MIDX bitmap to determine which +pack should be used by the pack-reuse mechanism, since it can ask +the MIDX for the pack containing the object at bit position 0). + + - If `pack(o1) ≠ pack(o2)`, then sort the two objects in descending + order based on the pack ID. + + - Otherwise, `pack(o1) = pack(o2)`, and the objects are sorted in + pack-order (i.e., `o1` sorts ahead of `o2` exactly when `offset(o1) + < offset(o2)`). + +In short, a MIDX's pseudo-pack is the de-duplicated concatenation of +objects in packs stored by the MIDX, laid out in pack order, and the +packs arranged in MIDX order (with the preferred pack coming first). + +Finally, note that the MIDX's reverse index is not stored as a chunk in +the multi-pack-index itself. This is done because the reverse index +includes the checksum of the pack or MIDX to which it belongs, which +makes it impossible to write in the MIDX. To avoid races when rewriting +the MIDX, a MIDX reverse index includes the MIDX's checksum in its +filename (e.g., `multi-pack-index-xyz.rev`). diff --git a/Documentation/technical/parallel-checkout.txt b/Documentation/technical/parallel-checkout.txt new file mode 100644 index 0000000000..e790258a1a --- /dev/null +++ b/Documentation/technical/parallel-checkout.txt @@ -0,0 +1,270 @@ +Parallel Checkout Design Notes +============================== + +The "Parallel Checkout" feature attempts to use multiple processes to +parallelize the work of uncompressing the blobs, applying in-core +filters, and writing the resulting contents to the working tree during a +checkout operation. It can be used by all checkout-related commands, +such as `clone`, `checkout`, `reset`, `sparse-checkout`, and others. + +These commands share the following basic structure: + +* Step 1: Read the current index file into memory. + +* Step 2: Modify the in-memory index based upon the command, and + temporarily mark all cache entries that need to be updated. + +* Step 3: Populate the working tree to match the new candidate index. + This includes iterating over all of the to-be-updated cache entries + and delete, create, or overwrite the associated files in the working + tree. + +* Step 4: Write the new index to disk. + +Step 3 is the focus of the "parallel checkout" effort described here. + +Sequential Implementation +------------------------- + +For the purposes of discussion here, the current sequential +implementation of Step 3 is divided in 3 parts, each one implemented in +its own function: + +* Step 3a: `unpack-trees.c:check_updates()` contains a series of + sequential loops iterating over the `cache_entry`'s array. The main + loop in this function calls the Step 3b function for each of the + to-be-updated entries. + +* Step 3b: `entry.c:checkout_entry()` examines the existing working tree + for file conflicts, collisions, and unsaved changes. It removes files + and creates leading directories as necessary. It calls the Step 3c + function for each entry to be written. + +* Step 3c: `entry.c:write_entry()` loads the blob into memory, smudges + it if necessary, creates the file in the working tree, writes the + smudged contents, calls `fstat()` or `lstat()`, and updates the + associated `cache_entry` struct with the stat information gathered. + +It wouldn't be safe to perform Step 3b in parallel, as there could be +race conditions between file creations and removals. Instead, the +parallel checkout framework lets the sequential code handle Step 3b, +and uses parallel workers to replace the sequential +`entry.c:write_entry()` calls from Step 3c. + +Rejected Multi-Threaded Solution +-------------------------------- + +The most "straightforward" implementation would be to spread the set of +to-be-updated cache entries across multiple threads. But due to the +thread-unsafe functions in the ODB code, we would have to use locks to +coordinate the parallel operation. An early prototype of this solution +showed that the multi-threaded checkout would bring performance +improvements over the sequential code, but there was still too much lock +contention. A `perf` profiling indicated that around 20% of the runtime +during a local Linux clone (on an SSD) was spent in locking functions. +For this reason this approach was rejected in favor of using multiple +child processes, which led to a better performance. + +Multi-Process Solution +---------------------- + +Parallel checkout alters the aforementioned Step 3 to use multiple +`checkout--worker` background processes to distribute the work. The +long-running worker processes are controlled by the foreground Git +command using the existing run-command API. + +Overview +~~~~~~~~ + +Step 3b is only slightly altered; for each entry to be checked out, the +main process performs the following steps: + +* M1: Check whether there is any untracked or unclean file in the + working tree which would be overwritten by this entry, and decide + whether to proceed (removing the file(s)) or not. + +* M2: Create the leading directories. + +* M3: Load the conversion attributes for the entry's path. + +* M4: Check, based on the entry's type and conversion attributes, + whether the entry is eligible for parallel checkout (more on this + later). If it is eligible, enqueue the entry and the loaded + attributes to later write the entry in parallel. If not, write the + entry right away, using the default sequential code. + +Note: we save the conversion attributes associated with each entry +because the workers don't have access to the main process' index state, +so they can't load the attributes by themselves (and the attributes are +needed to properly smudge the entry). Additionally, this has a positive +impact on performance as (1) we don't need to load the attributes twice +and (2) the attributes machinery is optimized to handle paths in +sequential order. + +After all entries have passed through the above steps, the main process +checks if the number of enqueued entries is sufficient to spread among +the workers. If not, it just writes them sequentially. Otherwise, it +spawns the workers and distributes the queued entries uniformly in +continuous chunks. This aims to minimize the chances of two workers +writing to the same directory simultaneously, which could increase lock +contention in the kernel. + +Then, for each assigned item, each worker: + +* W1: Checks if there is any non-directory file in the leading part of + the entry's path or if there already exists a file at the entry' path. + If so, mark the entry with `PC_ITEM_COLLIDED` and skip it (more on + this later). + +* W2: Creates the file (with O_CREAT and O_EXCL). + +* W3: Loads the blob into memory (inflating and delta reconstructing + it). + +* W4: Applies any required in-process filter, like end-of-line + conversion and re-encoding. + +* W5: Writes the result to the file descriptor opened at W2. + +* W6: Calls `fstat()` or lstat()` on the just-written path, and sends + the result back to the main process, together with the end status of + the operation and the item's identification number. + +Note that, when possible, steps W3 to W5 are delegated to the streaming +machinery, removing the need to keep the entire blob in memory. + +If the worker fails to read the blob or to write it to the working tree, +it removes the created file to avoid leaving empty files behind. This is +the *only* time a worker is allowed to remove a file. + +As mentioned earlier, it is the responsibility of the main process to +remove any file that blocks the checkout operation (or abort if the +removal(s) would cause data loss and the user didn't ask to `--force`). +This is crucial to avoid race conditions and also to properly detect +path collisions at Step W1. + +After the workers finish writing the items and sending back the required +information, the main process handles the results in two steps: + +- First, it updates the in-memory index with the `lstat()` information + sent by the workers. (This must be done first as this information + might me required in the following step.) + +- Then it writes the items which collided on disk (i.e. items marked + with `PC_ITEM_COLLIDED`). More on this below. + +Path Collisions +--------------- + +Path collisions happen when two different paths correspond to the same +entry in the file system. E.g. the paths 'a' and 'A' would collide in a +case-insensitive file system. + +The sequential checkout deals with collisions in the same way that it +deals with files that were already present in the working tree before +checkout. Basically, it checks if the path that it wants to write +already exists on disk, makes sure the existing file doesn't have +unsaved data, and then overwrites it. (To be more pedantic: it deletes +the existing file and creates the new one.) So, if there are multiple +colliding files to be checked out, the sequential code will write each +one of them but only the last will actually survive on disk. + +Parallel checkout aims to reproduce the same behavior. However, we +cannot let the workers racily write to the same file on disk. Instead, +the workers detect when the entry that they want to check out would +collide with an existing file, and mark it with `PC_ITEM_COLLIDED`. +Later, the main process can sequentially feed these entries back to +`checkout_entry()` without the risk of race conditions. On clone, this +also has the effect of marking the colliding entries to later emit a +warning for the user, like the classic sequential checkout does. + +The workers are able to detect both collisions among the entries being +concurrently written and collisions between a parallel-eligible entry +and an ineligible entry. The general idea for collision detection is +quite straightforward: for each parallel-eligible entry, the main +process must remove all files that prevent this entry from being written +(before enqueueing it). This includes any non-directory file in the +leading path of the entry. Later, when a worker gets assigned the entry, +it looks again for the non-directories files and for an already existing +file at the entry's path. If any of these checks finds something, the +worker knows that there was a path collision. + +Because parallel checkout can distinguish path collisions from the case +where the file was already present in the working tree before checkout, +we could alternatively choose to skip the checkout of colliding entries. +However, each entry that doesn't get written would have NULL `lstat()` +fields on the index. This could cause performance penalties for +subsequent commands that need to refresh the index, as they would have +to go to the file system to see if the entry is dirty. Thus, if we have +N entries in a colliding group and we decide to write and `lstat()` only +one of them, every subsequent `git-status` will have to read, convert, +and hash the written file N - 1 times. By checking out all colliding +entries (like the sequential code does), we only pay the overhead once, +during checkout. + +Eligible Entries for Parallel Checkout +-------------------------------------- + +As previously mentioned, not all entries passed to `checkout_entry()` +will be considered eligible for parallel checkout. More specifically, we +exclude: + +- Symbolic links; to avoid race conditions that, in combination with + path collisions, could cause workers to write files at the wrong + place. For example, if we were to concurrently check out a symlink + 'a' -> 'b' and a regular file 'A/f' in a case-insensitive file system, + we could potentially end up writing the file 'A/f' at 'a/f', due to a + race condition. + +- Regular files that require external filters (either "one shot" filters + or long-running process filters). These filters are black-boxes to Git + and may have their own internal locking or non-concurrent assumptions. + So it might not be safe to run multiple instances in parallel. ++ +Besides, long-running filters may use the delayed checkout feature to +postpone the return of some filtered blobs. The delayed checkout queue +and the parallel checkout queue are not compatible and should remain +separate. ++ +Note: regular files that only require internal filters, like end-of-line +conversion and re-encoding, are eligible for parallel checkout. + +Ineligible entries are checked out by the classic sequential codepath +*before* spawning workers. + +Note: submodules's files are also eligible for parallel checkout (as +long as they don't fall into any of the excluding categories mentioned +above). But since each submodule is checked out in its own child +process, we don't mix the superproject's and the submodules' files in +the same parallel checkout process or queue. + +The API +------- + +The parallel checkout API was designed with the goal of minimizing +changes to the current users of the checkout machinery. This means that +they don't have to call a different function for sequential or parallel +checkout. As already mentioned, `checkout_entry()` will automatically +insert the given entry in the parallel checkout queue when this feature +is enabled and the entry is eligible; otherwise, it will just write the +entry right away, using the sequential code. In general, callers of the +parallel checkout API should look similar to this: + +---------------------------------------------- +int pc_workers, pc_threshold, err = 0; +struct checkout state; + +get_parallel_checkout_configs(&pc_workers, &pc_threshold); + +/* + * This check is not strictly required, but it + * should save some time in sequential mode. + */ +if (pc_workers > 1) + init_parallel_checkout(); + +for (each cache_entry ce to-be-updated) + err |= checkout_entry(ce, &state, NULL, NULL); + +err |= run_parallel_checkout(&state, pc_workers, pc_threshold, NULL, NULL); +---------------------------------------------- diff --git a/Documentation/technical/reftable.txt b/Documentation/technical/reftable.txt index 3ef169af27..d7c3b645cf 100644 --- a/Documentation/technical/reftable.txt +++ b/Documentation/technical/reftable.txt @@ -1011,8 +1011,13 @@ reftable stack, reload `tables.list`, and delete any tables no longer mentioned in `tables.list`. Irregular program exit may still leave about unused files. In this case, a -cleanup operation can read `tables.list`, note its modification timestamp, and -delete any unreferenced `*.ref` files that are older. +cleanup operation should proceed as follows: + +* take a lock `tables.list.lock` to prevent concurrent modifications +* refresh the reftable stack, by reading `tables.list` +* for each `*.ref` file, remove it if +** it is not mentioned in `tables.list`, and +** its max update_index is not beyond the max update_index of the stack Alternatives considered diff --git a/Documentation/technical/sparse-index.txt b/Documentation/technical/sparse-index.txt new file mode 100644 index 0000000000..3b24c1a219 --- /dev/null +++ b/Documentation/technical/sparse-index.txt @@ -0,0 +1,208 @@ +Git Sparse-Index Design Document +================================ + +The sparse-checkout feature allows users to focus a working directory on +a subset of the files at HEAD. The cone mode patterns, enabled by +`core.sparseCheckoutCone`, allow for very fast pattern matching to +discover which files at HEAD belong in the sparse-checkout cone. + +Three important scale dimensions for a Git working directory are: + +* `HEAD`: How many files are present at `HEAD`? + +* Populated: How many files are within the sparse-checkout cone. + +* Modified: How many files has the user modified in the working directory? + +We will use big-O notation -- O(X) -- to denote how expensive certain +operations are in terms of these dimensions. + +These dimensions are ordered by their magnitude: users (typically) modify +fewer files than are populated, and we can only populate files at `HEAD`. + +Problems occur if there is an extreme imbalance in these dimensions. For +example, if `HEAD` contains millions of paths but the populated set has +only tens of thousands, then commands like `git status` and `git add` can +be dominated by operations that require O(`HEAD`) operations instead of +O(Populated). Primarily, the cost is in parsing and rewriting the index, +which is filled primarily with files at `HEAD` that are marked with the +`SKIP_WORKTREE` bit. + +The sparse-index intends to take these commands that read and modify the +index from O(`HEAD`) to O(Populated). To do this, we need to modify the +index format in a significant way: add "sparse directory" entries. + +With cone mode patterns, it is possible to detect when an entire +directory will have its contents outside of the sparse-checkout definition. +Instead of listing all of the files it contains as individual entries, a +sparse-index contains an entry with the directory name, referencing the +object ID of the tree at `HEAD` and marked with the `SKIP_WORKTREE` bit. +If we need to discover the details for paths within that directory, we +can parse trees to find that list. + +At time of writing, sparse-directory entries violate expectations about the +index format and its in-memory data structure. There are many consumers in +the codebase that expect to iterate through all of the index entries and +see only files. In fact, these loops expect to see a reference to every +staged file. One way to handle this is to parse trees to replace a +sparse-directory entry with all of the files within that tree as the index +is loaded. However, parsing trees is slower than parsing the index format, +so that is a slower operation than if we left the index alone. The plan is +to make all of these integrations "sparse aware" so this expansion through +tree parsing is unnecessary and they use fewer resources than when using a +full index. + +The implementation plan below follows four phases to slowly integrate with +the sparse-index. The intention is to incrementally update Git commands to +interact safely with the sparse-index without significant slowdowns. This +may not always be possible, but the hope is that the primary commands that +users need in their daily work are dramatically improved. + +Phase I: Format and initial speedups +------------------------------------ + +During this phase, Git learns to enable the sparse-index and safely parse +one. Protections are put in place so that every consumer of the in-memory +data structure can operate with its current assumption of every file at +`HEAD`. + +At first, every index parse will call a helper method, +`ensure_full_index()`, which scans the index for sparse-directory entries +(pointing to trees) and replaces them with the full list of paths (with +blob contents) by parsing tree objects. This will be slower in all cases. +The only noticeable change in behavior will be that the serialized index +file contains sparse-directory entries. + +To start, we use a new required index extension, `sdir`, to allow +inserting sparse-directory entries into indexes with file format +versions 2, 3, and 4. This prevents Git versions that do not understand +the sparse-index from operating on one, while allowing tools that do not +understand the sparse-index to operate on repositories as long as they do +not interact with the index. A new format, index v5, will be introduced +that includes sparse-directory entries by default. It might also +introduce other features that have been considered for improving the +index, as well. + +Next, consumers of the index will be guarded against operating on a +sparse-index by inserting calls to `ensure_full_index()` or +`expand_index_to_path()`. If a specific path is requested, then those will +be protected from within the `index_file_exists()` and `index_name_pos()` +API calls: they will call `ensure_full_index()` if necessary. The +intention here is to preserve existing behavior when interacting with a +sparse-checkout. We don't want a change to happen by accident, without +tests. Many of these locations may not need any change before removing the +guards, but we should not do so without tests to ensure the expected +behavior happens. + +It may be desirable to _change_ the behavior of some commands in the +presence of a sparse index or more generally in any sparse-checkout +scenario. In such cases, these should be carefully communicated and +tested. No such behavior changes are intended during this phase. + +During a scan of the codebase, not every iteration of the cache entries +needs an `ensure_full_index()` check. The basic reasons include: + +1. The loop is scanning for entries with non-zero stage. These entries + are not collapsed into a sparse-directory entry. + +2. The loop is scanning for submodules. These entries are not collapsed + into a sparse-directory entry. + +3. The loop is part of the index API, especially around reading or + writing the format. + +4. The loop is checking for correct order of cache entries and that is + correct if and only if the sparse-directory entries are in the correct + location. + +5. The loop ignores entries with the `SKIP_WORKTREE` bit set, or is + otherwise already aware of sparse directory entries. + +6. The sparse-index is disabled at this point when using the split-index + feature, so no effort is made to protect the split-index API. + +Even after inserting these guards, we will keep expanding sparse-indexes +for most Git commands using the `command_requires_full_index` repository +setting. This setting will be on by default and disabled one builtin at a +time until we have sufficient confidence that all of the index operations +are properly guarded. + +To complete this phase, the commands `git status` and `git add` will be +integrated with the sparse-index so that they operate with O(Populated) +performance. They will be carefully tested for operations within and +outside the sparse-checkout definition. + +Phase II: Careful integrations +------------------------------ + +This phase focuses on ensuring that all index extensions and APIs work +well with a sparse-index. This requires significant increases to our test +coverage, especially for operations that interact with the working +directory outside of the sparse-checkout definition. Some of these +behaviors may not be the desirable ones, such as some tests already +marked for failure in `t1092-sparse-checkout-compatibility.sh`. + +The index extensions that may require special integrations are: + +* FS Monitor +* Untracked cache + +While integrating with these features, we should look for patterns that +might lead to better APIs for interacting with the index. Coalescing +common usage patterns into an API call can reduce the number of places +where sparse-directories need to be handled carefully. + +Phase III: Important command speedups +------------------------------------- + +At this point, the patterns for testing and implementing sparse-directory +logic should be relatively stable. This phase focuses on updating some of +the most common builtins that use the index to operate as O(Populated). +Here is a potential list of commands that could be valuable to integrate +at this point: + +* `git commit` +* `git checkout` +* `git merge` +* `git rebase` + +Hopefully, commands such as `git merge` and `git rebase` can benefit +instead from merge algorithms that do not use the index as a data +structure, such as the merge-ORT strategy. As these topics mature, we +may enable the ORT strategy by default for repositories using the +sparse-index feature. + +Along with `git status` and `git add`, these commands cover the majority +of users' interactions with the working directory. In addition, we can +integrate with these commands: + +* `git grep` +* `git rm` + +These have been proposed as some whose behavior could change when in a +repo with a sparse-checkout definition. It would be good to include this +behavior automatically when using a sparse-index. Some clarity is needed +to make the behavior switch clear to the user. + +This phase is the first where parallel work might be possible without too +much conflicts between topics. + +Phase IV: The long tail +----------------------- + +This last phase is less a "phase" and more "the new normal" after all of +the previous work. + +To start, the `command_requires_full_index` option could be removed in +favor of expanding only when hitting an API guard. + +There are many Git commands that could use special attention to operate as +O(Populated), while some might be so rare that it is acceptable to leave +them with additional overhead when a sparse-index is present. + +Here are some commands that might be useful to update: + +* `git sparse-checkout set` +* `git am` +* `git clean` +* `git stash` diff --git a/Documentation/user-manual.txt b/Documentation/user-manual.txt index fd480b8645..f9e54b8674 100644 --- a/Documentation/user-manual.txt +++ b/Documentation/user-manual.txt @@ -1,5 +1,8 @@ = Git User Manual +[preface] +== Introduction + Git is a fast distributed revision control system. This manual is designed to be readable by someone with basic UNIX |