diff options
Diffstat (limited to 'Documentation')
86 files changed, 2547 insertions, 632 deletions
diff --git a/Documentation/Makefile b/Documentation/Makefile index 04f69cf64e..a4c4063e50 100644 --- a/Documentation/Makefile +++ b/Documentation/Makefile @@ -6,7 +6,7 @@ MAN5_TXT=gitattributes.txt gitignore.txt gitmodules.txt githooks.txt \ gitrepository-layout.txt MAN7_TXT=gitcli.txt gittutorial.txt gittutorial-2.txt \ gitcvs-migration.txt gitcore-tutorial.txt gitglossary.txt \ - gitdiffcore.txt gitworkflows.txt + gitdiffcore.txt gitrevisions.txt gitworkflows.txt MAN_TXT = $(MAN1_TXT) $(MAN5_TXT) $(MAN7_TXT) MAN_XML=$(patsubst %.txt,%.xml,$(MAN_TXT)) diff --git a/Documentation/RelNotes-1.7.1.1.txt b/Documentation/RelNotes-1.7.1.1.txt new file mode 100644 index 0000000000..3f6b3148a3 --- /dev/null +++ b/Documentation/RelNotes-1.7.1.1.txt @@ -0,0 +1,96 @@ +Git v1.7.1.1 Release Notes +========================== + +Fixes since v1.7.1 +------------------ + + * Authentication over http transport can now be made lazily, in that the + request can first go to a URL without username, get a 401 response and + then the client will ask for the username to use. + + * We used to mistakenly think "../work" is a subdirectory of the current + directory when we are in "../work-xyz". + + * The attribute mechanism now allows an entry that uses an attribute + macro that set/unset one attribute, immediately followed by an + overriding setting; this makes attribute macros much easier to use. + + * We didn't recognize timezone "Z" as a synonym for "UTC" (75b37e70). + + * In 1.7.0, read-tree and user commands that use the mechanism such as + checkout and merge were fixed to handle switching between branches one + of which has a file while the other has a directory at the same path + correctly even when there are some "confusing" pathnames in them. But + the algorithm used for this fix was suboptimal and had a terrible + performance degradation especially in larger trees. + + * "git am -3" did not show diagnosis when the patch in the message was corrupt. + + * After "git apply --whitespace=fix" removed trailing blank lines in an + patch in a patch series, it failed to apply later patches that depend + on the presence of such blank lines. + + * "git bundle --stdin" segfaulted. + + * "git checkout" and "git rebase" overwrote paths that are marked "assume + unchanged". + + * "git commit --amend" on a commit with an invalid author-name line that + lacks the display name didn't work. + + * "git describe" did not tie-break tags that point at the same commit + correctly; newer ones are preferred by paying attention to the + tagger date now. + + * "git diff" used to tell underlying xdiff machinery to work very hard to + minimize the output, but this often was spending too many extra cycles + for very little gain. + + * "git diff --color" did not paint extended diff headers per line + (i.e. the coloring escape sequence didn't end at the end of line), + which confused "less -R". + + * "git fetch" over HTTP verifies the downloaded packfiles more robustly. + + * The memory usage by "git index-pack" (run during "git fetch" and "git + push") got leaner. + + * "GIT_DIR=foo.git git init --bare bar.git" created foo.git instead of bar.git. + + * "git log --abbrev=$num --format='%h' ignored --abbrev=$num. + + * "git ls-files ../out/side/cwd" refused to work. + + * "git merge --log" used to replace the custom message given by "-m" with + the shortlog, instead of appending to it. + + * "git notes copy" without any other argument segfaulted. + + * "git pull" accepted "--dry-run", gave it to underlying "git fetch" but + ignored the option itself, resulting in a bogus attempt to merge + unrelated commit. + + * "git rebase" did not faithfully reproduce a malformed author ident, that + is often seen in a repository converted from foreign SCMs. + + * "git reset --hard" started from a wrong directory and a working tree in + a nonstandard location is in use got confused. + + * "git send-email" lacked a way to specify the domainname used in the + EHLO/HELO exchange, causing rejected connection from picky servers. + It learned --smtp-domain option to solve this issue. + + * "git send-email" did not declare a content-transfer-encoding and + content-type even when its payload needs to be sent in 8-bit. + + * "git show -C -C" and other corner cases lost diff metainfo output + in 1.7.0. + + * "git stash" incorrectly lost paths in the working tree that were + previously removed from the index. + + * "git status" stopped refreshing the index by mistake in 1.7.1. + + * "git status" showed excess "hints" even when advice.statusHints is set to false. + +And other minor fixes and documentation updates. diff --git a/Documentation/RelNotes-1.7.1.2.txt b/Documentation/RelNotes-1.7.1.2.txt new file mode 100644 index 0000000000..61ba14e262 --- /dev/null +++ b/Documentation/RelNotes-1.7.1.2.txt @@ -0,0 +1,28 @@ +Git v1.7.1.2 Release Notes +========================== + +Fixes since v1.7.1.1 +-------------------- + + * "git commit" did not honor GIT_REFLOG_ACTION environment variable, resulting + reflog messages for cherry-pick and revert actions to be recorded as "commit". + + * "git clone/fetch/pull" issued an incorrect error message when a ref and + a symref that points to the ref were updated at the same time. This + obviously would update them to the same value, and should not result in + an error condition. + + * "git diff" inside a tree with many pathnames that have certain + characters has become very slow in 1.7.0 by mistake. + + * "git rev-parse --parseopt --stop-at-non-option" did not stop at non option + when --keep-dashdash was in effect. + + * An overlong line after ".gitdir: " in a git file caused out of bounds + access to an array on the stack. + + * "git config --path conf.var" to attempt to expand a variable conf.var + that uses "~/" short-hand segfaulted when $HOME environment variable + was not set. + +And other minor fixes and documentation updates. diff --git a/Documentation/RelNotes-1.7.1.txt b/Documentation/RelNotes-1.7.1.txt new file mode 100644 index 0000000000..9d89fedb36 --- /dev/null +++ b/Documentation/RelNotes-1.7.1.txt @@ -0,0 +1,89 @@ +Git v1.7.1 Release Notes +======================== + +Updates since v1.7.0 +-------------------- + + * Eric Raymond is the maintainer of updated CIAbot scripts, in contrib/. + + * gitk updates. + + * Some commands (e.g. svn and http interfaces) that interactively ask + for a password can be told to use an external program given via + GIT_ASKPASS. + + * Conflict markers that lead the common ancestor in diff3-style output + now have a label, which hopefully would help third-party tools that + expect one. + + * Comes with an updated bash-completion script. + + * "git am" learned "--keep-cr" option to handle inputs that are + a mixture of changes to files with and without CRLF line endings. + + * "git cvsimport" learned -R option to leave revision mapping between + CVS revisions and resulting git commits. + + * "git diff --submodule" notices and describes dirty submodules. + + * "git for-each-ref" learned %(symref), %(symref:short) and %(flag) + tokens. + + * "git hash-object --stdin-paths" can take "--no-filters" option now. + + * "git init" can be told to look at init.templatedir configuration + variable (obviously that has to come from either /etc/gitconfig or + $HOME/.gitconfig). + + * "git grep" learned "--no-index" option, to search inside contents that + are not managed by git. + + * "git grep" learned --color=auto/always/never. + + * "git grep" learned to paint filename and line-number in colors. + + * "git log -p --first-parent -m" shows one-parent diff for merge + commits, instead of showing combined diff. + + * "git merge-file" learned to use custom conflict marker size and also + to use the "union merge" behaviour. + + * "git notes" command has been rewritten in C and learned many commands + and features to help you carry notes forward across rebases and amends. + + * "git request-pull" identifies the commit the request is relative to in + a more readable way. + + * "git reset" learned "--keep" option that lets you discard commits + near the tip while preserving your local changes in a way similar + to how "git checkout branch" does. + + * "git status" notices and describes dirty submodules. + + * "git svn" should work better when interacting with repositories + with CRLF line endings. + + * "git imap-send" learned to support CRAM-MD5 authentication. + + * "gitweb" installation procedure can use "minified" js/css files + better. + + * Various documentation updates. + +Fixes since v1.7.0 +------------------ + +All of the fixes in v1.7.0.X maintenance series are included in this +release, unless otherwise noted. + + * "git add frotz/nitfol" did not complain when the entire frotz/ directory + was ignored. + + * "git diff --stat" used "int" to count the size of differences, + which could result in overflowing. + + * "git rev-list --pretty=oneline" didn't terminate a record with LF for + commits without any message. + + * "git rev-list --abbrev-commit" defaulted to 40-byte abbreviations, unlike + newer tools in the git toolset. diff --git a/Documentation/RelNotes-1.7.2.1.txt b/Documentation/RelNotes-1.7.2.1.txt new file mode 100644 index 0000000000..1103c47a4f --- /dev/null +++ b/Documentation/RelNotes-1.7.2.1.txt @@ -0,0 +1,25 @@ +Git v1.7.2.1 Release Notes +========================== + +Fixes since v1.7.2 +------------------ + + * "git instaweb" wasn't useful when your Apache was installed under a + name other than apache2 (e.g. "httpd"). + + * Similarly, "git web--browse" (invoked by "git help -w") learned that + chrome browser is sometimes called google-chrome. + + * An overlong line after ".gitdir: " in a git file caused out of bounds + access to an array on the stack. + + * "git config --path conf.var" to attempt to expand a variable conf.var + that uses "~/" short-hand segfaulted when $HOME environment variable + was not set. + + * Documentation on Cygwin failed to build. + + * The error message from "git pull blarg" when 'blarg' is an unknown + remote name has been improved. + +And other minor fixes and documentation updates. diff --git a/Documentation/RelNotes-1.7.2.txt b/Documentation/RelNotes-1.7.2.txt new file mode 100644 index 0000000000..15cf01178c --- /dev/null +++ b/Documentation/RelNotes-1.7.2.txt @@ -0,0 +1,151 @@ +Git v1.7.2 Release Notes +======================== + +Updates since v1.7.1 +-------------------- + + * core.eol configuration and text/eol attributes are the new way to control + the end of line conventions for files in the working tree. + + * core.autocrlf has been made safer - it will now only handle line + endings for new files and files that are LF-only in the + repository. To normalize content that has been checked in with + CRLF, use the new eol/text attributes. + + * The whitespace rules used in "git apply --whitespace" and "git diff" + gained a new member in the family (tab-in-indent) to help projects with + policy to indent only with spaces. + + * When working from a subdirectory, by default, git does not look for its + metadirectory ".git" across filesystems, primarily to help people who + have invocations of git in their custom PS1 prompts, as being outside + of a git repository would look for ".git" all the way up to the root + directory, and NFS mounts are often slow. DISCOVERY_ACROSS_FILESYSTEM + environment variable can be used to tell git not to stop at a + filesystem boundary. + + * Usage help messages generated by parse-options library (i.e. most + of the Porcelain commands) are sent to the standard output now. + + * ':/<string>' notation to look for a commit now takes regular expression + and it is not anchored at the beginning of the commit log message + anymore (this is a backward incompatible change). + + * "git" wrapper learned "-c name=value" option to override configuration + variable from the command line. + + * Improved portability for various platforms including older SunOS, + HP-UX 10/11, AIX, Tru64, etc. and platforms with Python 2.4. + + * The message from "git am -3" has been improved when conflict + resolution ended up making the patch a no-op. + + * "git blame" applies the textconv filter to the contents it works + on, when available. + + * "git checkout --orphan newbranch" is similar to "-b newbranch" but + prepares to create a root commit that is not connected to any existing + commit. + + * "git cherry-pick" learned to pick a range of commits + (e.g. "cherry-pick A..B" and "cherry-pick --stdin"), so did "git + revert"; these do not support the nicer sequencing control "rebase + [-i]" has, though. + + * "git cherry-pick" and "git revert" learned --strategy option to specify + the merge strategy to be used when performing three-way merges. + + * "git cvsserver" can be told to use pserver; its password file can be + stored outside the repository. + + * The output from the textconv filter used by "git diff" can be cached to + speed up their reuse. + + * "git diff --word-diff=<mode>" extends the existing "--color-words" + option, making it more useful in color-challenged environments. + + * The regexp to detect function headers used by "git diff" for PHP has + been enhanced for visibility modifiers (public, protected, etc.) to + better support PHP5. + + * "diff.noprefix" configuration variable can be used to implicitly + ask for "diff --no-prefix" behaviour. + + * "git for-each-ref" learned "%(objectname:short)" that gives the object + name abbreviated. + + * "git format-patch" learned --signature option and format.signature + configuration variable to customize the e-mail signature used in the + output. + + * Various options to "git grep" (e.g. --count, --name-only) work better + with binary files. + + * "git grep" learned "-Ovi" to open the files with hits in your editor. + + * "git help -w" learned "chrome" and "chromium" browsers. + + * "git log --decorate" shows commit decorations in various colours. + + * "git log --follow <path>" follows across copies (it used to only follow + renames). This may make the processing more expensive. + + * "git log --pretty=format:<template>" specifier learned "% <something>" + magic that inserts a space only when %<something> expands to a + non-empty string; this is similar to "%+<something>" magic, but is + useful in a context to generate a single line output. + + * "git notes prune" learned "-n" (dry-run) and "-v" options, similar to + what "git prune" has. + + * "git patch-id" can be fed a mbox without getting confused by the + signature line in the format-patch output. + + * "git remote" learned "set-branches" subcommand. + + * "git rev-list A..B" learned --ancestry-path option to further limit + the result to the commits that are on the ancestry chain between A and + B (i.e. commits that are not descendants of A are excluded). + + * "git show -5" is equivalent to "git show --do-walk 5"; this is similar + to the update to make "git show master..next" walk the history, + introduced in 1.6.4. + + * "git status [-s] --ignored" can be used to list ignored paths. + + * "git status -s -b" shows the current branch in the output. + + * "git status" learned "--ignore-submodules" option. + + * Various "gitweb" enhancements and clean-ups, including syntax + highlighting, "plackup" support for instaweb, .fcgi suffix to run + it as FastCGI script, etc. + + * The test harness has been updated to produce TAP-friendly output. + + * Many documentation improvement patches are also included. + + +Fixes since v1.7.1 +------------------ + +All of the fixes in v1.7.1.X maintenance series are included in this +release, unless otherwise noted. + + * We didn't URL decode "file:///path/to/repo" correctly when path/to/repo + had percent-encoded characters (638794c, 9d2e942, ce83eda, 3c73a1d). + + * "git clone" did not configure remote.origin.url correctly for bare + clones (df61c889). + + * "git diff --graph" works better with "--color-words" and other options + (81fa024..4297c0a). + + * "git diff" could show ambiguous abbreviation of blob object names on + its "index" line (3e5a188). + + * "git reset --hard" started from a wrong directory and a working tree in + a nonstandard location is in use got confused (560fb6a1). + + * "git read-tree -m A B" used to switch to branch B while retaining + local changes added an incorrect cache-tree information (b1f47514). diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches index c686f8646b..eb53e0636e 100644 --- a/Documentation/SubmittingPatches +++ b/Documentation/SubmittingPatches @@ -41,6 +41,7 @@ Checklist (and a short version for the impatient): maintainer (gitster@pobox.com) if (and only if) the patch is ready for inclusion. If you use git-send-email(1), please test it first by sending email to yourself. + - see below for instructions specific to your mailer Long version: @@ -53,6 +54,34 @@ But the patch submission requirements are a lot more relaxed here on the technical/contents front, because the core GIT is thousand times smaller ;-). So here is only the relevant bits. +(0) Decide what to base your work on. + +In general, always base your work on the oldest branch that your +change is relevant to. + + - A bugfix should be based on 'maint' in general. If the bug is not + present in 'maint', base it on 'master'. For a bug that's not yet + in 'master', find the topic that introduces the regression, and + base your work on the tip of the topic. + + - A new feature should be based on 'master' in general. If the new + feature depends on a topic that is in 'pu', but not in 'master', + base your work on the tip of that topic. + + - Corrections and enhancements to a topic not yet in 'master' should + be based on the tip of that topic. If the topic has not been merged + to 'next', it's alright to add a note to squash minor corrections + into the series. + + - In the exceptional case that a new feature depends on several topics + not in 'master', start working on 'next' or 'pu' privately and send + out patches for discussion. Before the final merge, you may have to + wait until some of the dependent topics graduate to 'master', and + rebase your work. + +To find the tip of a topic branch, run "git log --first-parent +master..pu" and look for the merge commit. The second parent of this +commit is the tip of the topic branch. (1) Make separate commits for logically separate changes. @@ -170,17 +199,16 @@ patch, format it as "multipart/signed", not a text/plain message that starts with '-----BEGIN PGP SIGNED MESSAGE-----'. That is not a text/plain, it's something else. -Note that your maintainer does not necessarily read everything -on the git mailing list. If your patch is for discussion first, -send it "To:" the mailing list, and optionally "cc:" him. If it -is trivially correct or after the list reached a consensus, send -it "To:" the maintainer and optionally "cc:" the list for -inclusion. - -Also note that your maintainer does not actively involve himself in -maintaining what are in contrib/ hierarchy. When you send fixes and -enhancements to them, do not forget to "cc: " the person who primarily -worked on that hierarchy in contrib/. +Unless your patch is a very trivial and an obviously correct one, +first send it with "To:" set to the mailing list, with "cc:" listing +people who are involved in the area you are touching (the output from +"git blame $path" and "git shortlog --no-merges $path" would help to +identify them), to solicit comments and reviews. After the list +reached a consensus that it is a good idea to apply the patch, re-send +it with "To:" set to the maintainer and optionally "cc:" the list for +inclusion. Do not forget to add trailers such as "Acked-by:", +"Reviewed-by:" and "Tested-by:" after your "Signed-off-by:" line as +necessary. (4) Sign your work @@ -519,12 +547,28 @@ Gmail GMail does not appear to have any way to turn off line wrapping in the web interface, so this will mangle any emails that you send. You can however -use any IMAP email client to connect to the google imap server, and forward -the emails through that. Just make sure to disable line wrapping in that -email client. Alternatively, use "git send-email" instead. +use "git send-email" and send your patches through the GMail SMTP server, or +use any IMAP email client to connect to the google IMAP server and forward +the emails through that. + +To use "git send-email" and send your patches through the GMail SMTP server, +edit ~/.gitconfig to specify your account settings: + +[sendemail] + smtpencryption = tls + smtpserver = smtp.gmail.com + smtpuser = user@gmail.com + smtppass = p4ssw0rd + smtpserverport = 587 -Submitting properly formatted patches via Gmail is simple now that -IMAP support is available. First, edit your ~/.gitconfig to specify your +Once your commits are ready to be sent to the mailing list, run the +following commands: + + $ git format-patch --cover-letter -M origin/master -o outgoing/ + $ edit outgoing/0000-* + $ git send-email outgoing/* + +To submit using the IMAP interface, first, edit your ~/.gitconfig to specify your account settings: [imap] @@ -538,14 +582,12 @@ account settings: You might need to instead use: folder = "[Google Mail]/Drafts" if you get an error that the "Folder doesn't exist". -Next, ensure that your Gmail settings are correct. In "Settings" the -"Use Unicode (UTF-8) encoding for outgoing messages" should be checked. - -Once your commits are ready to send to the mailing list, run the following -command to send the patch emails to your Gmail Drafts folder. +Once your commits are ready to be sent to the mailing list, run the +following commands: - $ git format-patch -M --stdout origin/master | git imap-send + $ git format-patch --cover-letter -M --stdout origin/master | git imap-send -Go to your Gmail account, open the Drafts folder, find the patch email, fill -in the To: and CC: fields and send away! +Just make sure to disable line wrapping in the email client (GMail web +interface will line wrap no matter what, so you need to use a real +IMAP client). diff --git a/Documentation/blame-options.txt b/Documentation/blame-options.txt index d8205691c6..16e3c68576 100644 --- a/Documentation/blame-options.txt +++ b/Documentation/blame-options.txt @@ -90,9 +90,9 @@ of lines before or after the line given by <start>. running extra passes of inspection. + <num> is optional but it is the lower bound on the number of -alphanumeric characters that git must detect as moving +alphanumeric characters that git must detect as moving/copying within a file for it to associate those lines with the parent -commit. +commit. The default value is 20. -C|<num>|:: In addition to `-M`, detect lines moved or copied from other @@ -105,9 +105,11 @@ commit. looks for copies from other files in any commit. + <num> is optional but it is the lower bound on the number of -alphanumeric characters that git must detect as moving +alphanumeric characters that git must detect as moving/copying between files for it to associate those lines with the parent -commit. +commit. And the default value is 40. If there are more than one +`-C` options given, the <num> argument of the last `-C` will +take effect. -h:: --help:: diff --git a/Documentation/config.txt b/Documentation/config.txt index 8adb55c801..f81fb918da 100644 --- a/Documentation/config.txt +++ b/Documentation/config.txt @@ -196,20 +196,17 @@ core.quotepath:: quoted without `-z` regardless of the setting of this variable. -core.autocrlf:: - If true, makes git convert `CRLF` at the end of lines in text files to - `LF` when reading from the work tree, and convert in reverse when - writing to the work tree. The variable can be set to - 'input', in which case the conversion happens only while - reading from the work tree but files are written out to the work - tree with `LF` at the end of lines. A file is considered - "text" (i.e. be subjected to the autocrlf mechanism) based on - the file's `crlf` attribute, or if `crlf` is unspecified, - based on the file's contents. See linkgit:gitattributes[5]. +core.eol:: + Sets the line ending type to use in the working directory for + files that have the `text` property set. Alternatives are + 'lf', 'crlf' and 'native', which uses the platform's native + line ending. The default value is `native`. See + linkgit:gitattributes[5] for more information on end-of-line + conversion. core.safecrlf:: - If true, makes git check if converting `CRLF` as controlled by - `core.autocrlf` is reversible. Git will verify if a command + If true, makes git check if converting `CRLF` is reversible when + end-of-line conversion is active. Git will verify if a command modifies a file in the work tree either directly or indirectly. For example, committing a file followed by checking out the same file should yield the original file in the work tree. If @@ -219,7 +216,7 @@ core.safecrlf:: irreversible conversion but continue the operation. + CRLF conversion bears a slight chance of corrupting data. -autocrlf=true will convert CRLF to LF during commit and LF to +When it is enabled, git will convert CRLF to LF during commit and LF to CRLF during checkout. A file that contains a mixture of LF and CRLF before the commit cannot be recreated by git. For text files this is the right thing to do: it corrects line endings @@ -243,15 +240,25 @@ converting CRLFs corrupts data. + Note, this safety check does not mean that a checkout will generate a file identical to the original file for a different setting of -`core.autocrlf`, but only for the current one. For example, a text -file with `LF` would be accepted with `core.autocrlf=input` and could -later be checked out with `core.autocrlf=true`, in which case the +`core.eol` and `core.autocrlf`, but only for the current one. For +example, a text file with `LF` would be accepted with `core.eol=lf` +and could later be checked out with `core.eol=crlf`, in which case the resulting file would contain `CRLF`, although the original file contained `LF`. However, in both work trees the line endings would be consistent, that is either all `LF` or all `CRLF`, but never mixed. A file with mixed line endings would be reported by the `core.safecrlf` mechanism. +core.autocrlf:: + Setting this variable to "true" is almost the same as setting + the `text` attribute to "auto" on all files except that text + files are not guaranteed to be normalized: files that contain + `CRLF` in the repository will not be touched. Use this + setting if you want to have `CRLF` line endings in your + working directory even though the repository does not have + normalized line endings. This variable can be set to 'input', + in which case no output conversion is performed. + core.symlinks:: If false, symbolic links are checked out as small plain files that contain the link text. linkgit:git-update-index[1] and @@ -481,6 +488,8 @@ core.whitespace:: error (enabled by default). * `indent-with-non-tab` treats a line that is indented with 8 or more space characters as an error (not enabled by default). +* `tab-in-indent` treats a tab character in the initial indent part of + the line as an error (not enabled by default). * `blank-at-eof` treats blank lines added at the end of file as an error (enabled by default). * `trailing-space` is a short-hand to cover both `blank-at-eol` and @@ -518,16 +527,12 @@ check that makes sure that existing object files will not get overwritten. core.notesRef:: When showing commit messages, also show notes which are stored in - the given ref. This ref is expected to contain files named - after the full SHA-1 of the commit they annotate. + the given ref. The ref must be fully qualified. If the given + ref does not exist, it is not an error but means that no + notes should be printed. + -If such a file exists in the given ref, the referenced blob is read, and -appended to the commit message, separated by a "Notes:" line. If the -given ref itself does not exist, it is not an error, but means that no -notes should be printed. -+ -This setting defaults to "refs/notes/commits", and can be overridden by -the `GIT_NOTES_REF` environment variable. +This setting defaults to "refs/notes/commits", and it can be overridden by +the 'GIT_NOTES_REF' environment variable. See linkgit:git-notes[1]. core.sparseCheckout:: Enable "sparse checkout" feature. See section "Sparse checkout" in @@ -555,6 +560,13 @@ it will be treated as a shell command. For example, defining executed from the top-level directory of a repository, which may not necessarily be the current directory. +am.keepcr:: + If true, git-am will call git-mailsplit for patches in mbox format + with parameter '--keep-cr'. In this case git-mailsplit will + not remove `\r` from lines ending with `\r\n`. Can be overrriden + by giving '--no-keep-cr' from the command line. + See linkgit:git-am[1], linkgit:git-mailsplit[1]. + apply.ignorewhitespace:: When set to 'change', tells 'git apply' to ignore changes in whitespace, in the same way as the '--ignore-space-change' @@ -678,14 +690,39 @@ color.diff.<slot>:: (highlighting whitespace errors). The values of these variables may be specified as in color.branch.<slot>. +color.decorate.<slot>:: + Use customized color for 'git log --decorate' output. `<slot>` is one + of `branch`, `remoteBranch`, `tag`, `stash` or `HEAD` for local + branches, remote tracking branches, tags, stash and HEAD, respectively. + color.grep:: When set to `always`, always highlight matches. When `false` (or `never`), never. When set to `true` or `auto`, use color only when the output is written to the terminal. Defaults to `false`. -color.grep.match:: - Use customized color for matches. The value of this variable - may be specified as in color.branch.<slot>. +color.grep.<slot>:: + Use customized color for grep colorization. `<slot>` specifies which + part of the line to use the specified color, and is one of ++ +-- +`context`;; + non-matching text in context lines (when using `-A`, `-B`, or `-C`) +`filename`;; + filename prefix (when not using `-h`) +`function`;; + function name lines (when using `-p`) +`linenumber`;; + line number prefix (when using `-n`) +`match`;; + matching text +`selected`;; + non-matching text in selected lines +`separator`;; + separators between fields on a line (`:`, `-`, and `=`) + and between hunks (`--`) +-- ++ +The values of these variables may be specified as in color.branch.<slot>. color.interactive:: When set to `always`, always use colors for interactive prompts @@ -767,6 +804,8 @@ diff.mnemonicprefix:: standard "a/" and "b/" depending on what is being compared. When this configuration is in effect, reverse diff output also swaps the order of the prefixes: +diff.noprefix:: + If set, 'git diff' does not show any source or destination prefix. `git diff`;; compares the (i)ndex and the (w)ork tree; `git diff HEAD`;; @@ -847,14 +886,22 @@ format.headers:: Additional email headers to include in a patch to be submitted by mail. See linkgit:git-format-patch[1]. +format.to:: format.cc:: - Additional "Cc:" headers to include in a patch to be submitted - by mail. See the --cc option in linkgit:git-format-patch[1]. + Additional recipients to include in a patch to be submitted + by mail. See the --to and --cc options in + linkgit:git-format-patch[1]. format.subjectprefix:: The default for format-patch is to output files with the '[PATCH]' subject prefix. Use this variable to change that prefix. +format.signature:: + The default for format-patch is to output a signature containing + the git version number. Use this variable to change that default. + Set this variable to the empty string ("") to suppress + signature generation. + format.suffix:: The default for format-patch is to output files with the suffix `.patch`. Use this variable to change that suffix (make sure to @@ -915,13 +962,19 @@ gc.pruneexpire:: unreachable objects immediately. gc.reflogexpire:: +gc.<pattern>.reflogexpire:: 'git reflog expire' removes reflog entries older than - this time; defaults to 90 days. + this time; defaults to 90 days. With "<pattern>" (e.g. + "refs/stash") in the middle the setting applies only to + the refs that match the <pattern>. gc.reflogexpireunreachable:: +gc.<ref>.reflogexpireunreachable:: 'git reflog expire' removes reflog entries older than this time and are not reachable from the current tip; - defaults to 30 days. + defaults to 30 days. With "<pattern>" (e.g. "refs/stash") + in the middle, the setting applies only to the refs that + match the <pattern>. gc.rerereresolved:: Records of conflicted merge you resolved earlier are @@ -946,13 +999,15 @@ gitcvs.logfile:: various stuff. See linkgit:git-cvsserver[1]. gitcvs.usecrlfattr:: - If true, the server will look up the `crlf` attribute for - files to determine the '-k' modes to use. If `crlf` is set, - the '-k' mode will be left blank, so cvs clients will - treat it as text. If `crlf` is explicitly unset, the file + If true, the server will look up the end-of-line conversion + attributes for files to determine the '-k' modes to use. If + the attributes force git to treat a file as text, + the '-k' mode will be left blank so cvs clients will + treat it as text. If they suppress text conversion, the file will be set with '-kb' mode, which suppresses any newline munging - the client might otherwise do. If `crlf` is not specified, - then 'gitcvs.allbinary' is used. See linkgit:gitattributes[5]. + the client might otherwise do. If the attributes do not allow + the file type to be determined, then 'gitcvs.allbinary' is + used. See linkgit:gitattributes[5]. gitcvs.allbinary:: This is used if 'gitcvs.usecrlfattr' does not resolve @@ -1203,6 +1258,10 @@ imap:: The configuration variables in the 'imap' section are described in linkgit:git-imap-send[1]. +init.templatedir:: + Specify the directory from which templates will be copied. + (See the "TEMPLATE DIRECTORY" section of linkgit:git-init[1].) + instaweb.browser:: Specify the program that will be used to browse your working repository in gitweb. See linkgit:git-instaweb[1]. @@ -1235,6 +1294,13 @@ log.date:: following alternatives: {relative,local,default,iso,rfc,short}. See linkgit:git-log[1]. +log.decorate:: + Print out the ref names of any commits that are shown by the log + command. If 'short' is specified, the ref name prefixes 'refs/heads/', + 'refs/tags/' and 'refs/remotes/' will not be printed. If 'full' is + specified, the full ref name (including prefix) will be printed. + This is the same as the log commands '--decorate' option. + log.showroot:: If true, the initial commit will be shown as a big creation event. This is equivalent to a diff against an empty tree. @@ -1303,6 +1369,53 @@ mergetool.keepTemporaries:: mergetool.prompt:: Prompt before each invocation of the merge resolution program. +notes.displayRef:: + The (fully qualified) refname from which to show notes when + showing commit messages. The value of this variable can be set + to a glob, in which case notes from all matching refs will be + shown. You may also specify this configuration variable + several times. A warning will be issued for refs that do not + exist, but a glob that does not match any refs is silently + ignored. ++ +This setting can be overridden with the `GIT_NOTES_DISPLAY_REF` +environment variable, which must be a colon separated list of refs or +globs. ++ +The effective value of "core.notesRef" (possibly overridden by +GIT_NOTES_REF) is also implicitly added to the list of refs to be +displayed. + +notes.rewrite.<command>:: + When rewriting commits with <command> (currently `amend` or + `rebase`) and this variable is set to `true`, git + automatically copies your notes from the original to the + rewritten commit. Defaults to `true`, but see + "notes.rewriteRef" below. + +notes.rewriteMode:: + When copying notes during a rewrite (see the + "notes.rewrite.<command>" option), determines what to do if + the target commit already has a note. Must be one of + `overwrite`, `concatenate`, or `ignore`. Defaults to + `concatenate`. ++ +This setting can be overridden with the `GIT_NOTES_REWRITE_MODE` +environment variable. + +notes.rewriteRef:: + When copying notes during a rewrite, specifies the (fully + qualified) ref whose notes should be copied. The ref may be a + glob, in which case notes in all matching refs will be copied. + You may also specify this configuration several times. ++ +Does not have a default value; you must configure this variable to +enable note rewriting. ++ +This setting can be overridden with the `GIT_NOTES_REWRITE_REF` +environment variable, which must be a colon separated list of refs or +globs. + pack.window:: The size of the window used by linkgit:git-pack-objects[1] when no window size is given on the command line. Defaults to 10. @@ -1386,6 +1499,16 @@ pager.<cmd>:: it takes precedence over this option. To disable pagination for all commands, set `core.pager` or `GIT_PAGER` to `cat`. +pretty.<name>:: + Alias for a --pretty= format string, as specified in + linkgit:git-log[1]. Any aliases defined here can be used just + as the built-in pretty formats could. For example, + running `git config pretty.changelog "format:{asterisk} %H %s"` + would cause the invocation `git log --pretty=changelog` + to be equivalent to running `git log "--pretty=format:{asterisk} %H %s"`. + Note that an alias with the same name as a built-in format + will be silently ignored. + pull.octopus:: The default merge strategy to use when pulling multiple branches at once. @@ -1435,8 +1558,12 @@ receive.denyDeletes:: If set to true, git-receive-pack will deny a ref update that deletes the ref. Use this to prevent such a ref deletion via a push. +receive.denyDeleteCurrent:: + If set to true, git-receive-pack will deny a ref update that + deletes the currently checked out branch of a non-bare repository. + receive.denyCurrentBranch:: - If set to true or "refuse", receive-pack will deny a ref update + If set to true or "refuse", git-receive-pack will deny a ref update to the currently checked out branch of a non-bare repository. Such a push is potentially dangerous because it brings the HEAD out of sync with the index and working tree. If set to "warn", @@ -1498,7 +1625,9 @@ remote.<name>.uploadpack:: remote.<name>.tagopt:: Setting this value to \--no-tags disables automatic tag following when - fetching from remote <name> + fetching from remote <name>. Setting it to \--tags will fetch every + tag from remote <name>, even if they are not reachable from remote + branch heads. remote.<name>.vcs:: Setting this to a value <vcs> will cause git to interact with @@ -1562,6 +1691,7 @@ sendemail.smtppass:: sendemail.suppresscc:: sendemail.suppressfrom:: sendemail.to:: +sendemail.smtpdomain:: sendemail.smtpserver:: sendemail.smtpserverport:: sendemail.smtpuser:: @@ -1608,6 +1738,15 @@ status.submodulesummary:: summary of commits for modified submodules will be shown (see --summary-limit option of linkgit:git-submodule[1]). +submodule.<name>.path:: +submodule.<name>.url:: +submodule.<name>.update:: + The path within this project, URL, and the updating strategy + for a submodule. These variables are initially populated + by 'git submodule init'; edit them to override the + URL and other values found in the `.gitmodules` file. See + linkgit:git-submodule[1] and linkgit:gitmodules[5] for details. + tar.umask:: This variable can be used to restrict the permission bits of tar archive entries. The default is 0002, which turns off the diff --git a/Documentation/diff-generate-patch.txt b/Documentation/diff-generate-patch.txt index 0f25ba7e38..8f9a2412fd 100644 --- a/Documentation/diff-generate-patch.txt +++ b/Documentation/diff-generate-patch.txt @@ -56,7 +56,8 @@ combined diff format "git-diff-tree", "git-diff-files" and "git-diff" can take '-c' or '--cc' option to produce 'combined diff'. For showing a merge commit -with "git log -p", this is the default format. +with "git log -p", this is the default format; you can force showing +full diff with the '-m' option. A 'combined diff' format looks like this: ------------ diff --git a/Documentation/diff-options.txt b/Documentation/diff-options.txt index a1191d647b..eecedaab6e 100644 --- a/Documentation/diff-options.txt +++ b/Documentation/diff-options.txt @@ -21,6 +21,7 @@ endif::git-format-patch[] ifndef::git-format-patch[] -p:: -u:: +--patch:: Generate patch (see section on generating patches). {git-diff? This is the default.} endif::git-format-patch[] @@ -117,18 +118,48 @@ any of those replacements occurred. option and lists the commits in that commit range like the 'summary' option of linkgit:git-submodule[1] does. ---color:: +--color[=<when>]:: Show colored diff. + The value must be always (the default), never, or auto. --no-color:: Turn off colored diff, even when the configuration file gives the default to color output. + Same as `--color=never`. ---color-words[=<regex>]:: - Show colored word diff, i.e., color words which have changed. - By default, words are separated by whitespace. +--word-diff[=<mode>]:: + Show a word diff, using the <mode> to delimit changed words. + By default, words are delimited by whitespace; see + `--word-diff-regex` below. The <mode> defaults to 'plain', and + must be one of: ++ +-- +color:: + Highlight changed words using only colors. Implies `--color`. +plain:: + Show words as `[-removed-]` and `{+added+}`. Makes no + attempts to escape the delimiters if they appear in the input, + so the output may be ambiguous. +porcelain:: + Use a special line-based format intended for script + consumption. Added/removed/unchanged runs are printed in the + usual unified diff format, starting with a `+`/`-`/` ` + character at the beginning of the line and extending to the + end of the line. Newlines in the input are represented by a + tilde `~` on a line of its own. +none:: + Disable word diff again. +-- ++ +Note that despite the name of the first mode, color is used to +highlight the changed parts in all modes if enabled. + +--word-diff-regex=<regex>:: + Use <regex> to decide what a word is, instead of considering + runs of non-whitespace to be a word. Also implies + `--word-diff` unless it was already enabled. + -When a <regex> is specified, every non-overlapping match of the +Every non-overlapping match of the <regex> is considered a word. Anything between these matches is considered whitespace and ignored(!) for the purposes of finding differences. You may want to append `|[^[:space:]]` to your regular @@ -140,6 +171,10 @@ The regex can also be set via a diff driver or configuration option, see linkgit:gitattributes[1] or linkgit:git-config[1]. Giving it explicitly overrides any diff driver or configuration setting. Diff drivers override configuration settings. + +--color-words[=<regex>]:: + Equivalent to `--word-diff=color` plus (if a regex was + specified) `--word-diff-regex=<regex>`. endif::git-format-patch[] --no-renames:: @@ -171,14 +206,46 @@ endif::git-format-patch[] the diff-patch output format. Non default number of digits can be specified with `--abbrev=<n>`. --B:: - Break complete rewrite changes into pairs of delete and create. - --M:: +-B[<n>][/<m>]:: + Break complete rewrite changes into pairs of delete and + create. This serves two purposes: ++ +It affects the way a change that amounts to a total rewrite of a file +not as a series of deletion and insertion mixed together with a very +few lines that happen to match textually as the context, but as a +single deletion of everything old followed by a single insertion of +everything new, and the number `m` controls this aspect of the -B +option (defaults to 60%). `-B/70%` specifies that less than 30% of the +original should remain in the result for git to consider it a total +rewrite (i.e. otherwise the resulting patch will be a series of +deletion and insertion mixed together with context lines). ++ +When used with -M, a totally-rewritten file is also considered as the +source of a rename (usually -M only considers a file that disappeared +as the source of a rename), and the number `n` controls this aspect of +the -B option (defaults to 50%). `-B20%` specifies that a change with +addition and deletion compared to 20% or more of the file's size are +eligible for being picked up as a possible source of a rename to +another file. + +-M[<n>]:: +ifndef::git-log[] Detect renames. +endif::git-log[] +ifdef::git-log[] + If generating diffs, detect and report renames for each commit. + For following files across renames while traversing history, see + `--follow`. +endif::git-log[] + If `n` is specified, it is a is a threshold on the similarity + index (i.e. amount of addition/deletions compared to the + file's size). For example, `-M90%` means git should consider a + delete/add pair to be a rename if more than 90% of the file + hasn't changed. --C:: +-C[<n>]:: Detect copies as well as renames. See also `--find-copies-harder`. + If `n` is specified, it has the same meaning as for `-M<n>`. ifndef::git-format-patch[] --diff-filter=[ACDMRTUXB*]:: @@ -286,8 +353,14 @@ endif::git-format-patch[] --no-ext-diff:: Disallow external diff drivers. ---ignore-submodules:: - Ignore changes to submodules in the diff generation. +--ignore-submodules[=<when>]:: + Ignore changes to submodules in the diff generation. <when> can be + either "untracked", "dirty" or "all", which is the default. When + "untracked" is used submodules are not considered dirty when they only + contain untracked content (but they are still scanned for modified + content). Using "dirty" ignores all changes to the work tree of submodules, + only changes to the commits stored in the superproject are shown (this was + the behavior until 1.7.0). Using "all" hides all changes to submodules. --src-prefix=<prefix>:: Show the given source prefix instead of "a/". diff --git a/Documentation/everyday.txt b/Documentation/everyday.txt index 9310b650d3..e0ba8cc075 100644 --- a/Documentation/everyday.txt +++ b/Documentation/everyday.txt @@ -1,13 +1,8 @@ Everyday GIT With 20 Commands Or So =================================== -<<Basic Repository>> commands are needed by people who have a -repository --- that is everybody, because every working tree of -git is a repository. - -In addition, <<Individual Developer (Standalone)>> commands are -essential for anybody who makes a commit, even for somebody who -works alone. +<<Individual Developer (Standalone)>> commands are essential for +anybody who makes a commit, even for somebody who works alone. If you work with other people, you will need commands listed in the <<Individual Developer (Participant)>> section as well. @@ -20,46 +15,6 @@ administrators who are responsible for the care and feeding of git repositories. -Basic Repository[[Basic Repository]] ------------------------------------- - -Everybody uses these commands to maintain git repositories. - - * linkgit:git-init[1] or linkgit:git-clone[1] to create a - new repository. - - * linkgit:git-fsck[1] to check the repository for errors. - - * linkgit:git-gc[1] to do common housekeeping tasks such as - repack and prune. - -Examples -~~~~~~~~ - -Check health and remove cruft.:: -+ ------------- -$ git fsck <1> -$ git count-objects <2> -$ git gc <3> ------------- -+ -<1> running without `\--full` is usually cheap and assures the -repository health reasonably well. -<2> check how many loose objects there are and how much -disk space is wasted by not repacking. -<3> repacks the local repository and performs other housekeeping tasks. - -Repack a small project into single pack.:: -+ ------------- -$ git gc <1> ------------- -+ -<1> pack all the objects reachable from the refs into one pack, -then remove the other packs. - - Individual Developer (Standalone)[[Individual Developer (Standalone)]] ---------------------------------------------------------------------- @@ -67,6 +22,8 @@ A standalone individual developer does not exchange patches with other people, and works alone in a single repository, using the following commands. + * linkgit:git-init[1] to create a new repository. + * linkgit:git-show-branch[1] to see where you are. * linkgit:git-log[1] to see what happened. diff --git a/Documentation/fetch-options.txt b/Documentation/fetch-options.txt index fe716b2e42..9333c42c55 100644 --- a/Documentation/fetch-options.txt +++ b/Documentation/fetch-options.txt @@ -34,6 +34,7 @@ ifndef::git-pull[] Allow several <repository> and <group> arguments to be specified. No <refspec>s may be specified. +-p:: --prune:: After fetching, remove any remote tracking branches which no longer exist on the remote. @@ -78,9 +79,16 @@ ifndef::git-pull[] -q:: --quiet:: Pass --quiet to git-fetch-pack and silence any other internally - used git commands. + used git commands. Progress is not reported to the standard error + stream. -v:: --verbose:: Be verbose. endif::git-pull[] + +--progress:: + Progress status is reported on the standard error stream + by default when it is attached to a terminal, unless -q + is specified. This flag forces progress status even if the + standard error stream is not directed to a terminal. diff --git a/Documentation/git-add.txt b/Documentation/git-add.txt index 51cbeb7032..e22a62f065 100644 --- a/Documentation/git-add.txt +++ b/Documentation/git-add.txt @@ -10,7 +10,8 @@ SYNOPSIS [verse] 'git add' [-n] [-v] [--force | -f] [--interactive | -i] [--patch | -p] [--edit | -e] [--all | [--update | -u]] [--intent-to-add | -N] - [--refresh] [--ignore-errors] [--] [<filepattern>...] + [--refresh] [--ignore-errors] [--ignore-missing] [--] + [<filepattern>...] DESCRIPTION ----------- @@ -57,7 +58,8 @@ OPTIONS -n:: --dry-run:: - Don't actually add the file(s), just show if they exist. + Don't actually add the file(s), just show if they exist and/or will + be ignored. -v:: --verbose:: @@ -131,6 +133,12 @@ subdirectories. them, do not abort the operation, but continue adding the others. The command shall still exit with non-zero status. +--ignore-missing:: + This option can only be used together with --dry-run. By using + this option the user can check if any of the given files would + be ignored, no matter if they are already present in the work + tree or not. + \--:: This option can be used to separate command-line options from the list of files, (useful when filenames might be mistaken @@ -266,9 +274,9 @@ patch:: y - stage this hunk n - do not stage this hunk - q - quit, do not stage this hunk nor any of the remaining ones - a - stage this and all the remaining hunks in the file - d - do not stage this hunk nor any of the remaining hunks in the file + q - quit; do not stage this hunk nor any of the remaining ones + a - stage this hunk and all later hunks in the file + d - do not stage this hunk nor any of the later hunks in the file g - select a hunk to go to / - search for a hunk matching the given regex j - leave this hunk undecided, see next undecided hunk diff --git a/Documentation/git-am.txt b/Documentation/git-am.txt index 23864df8da..9e62f8778f 100644 --- a/Documentation/git-am.txt +++ b/Documentation/git-am.txt @@ -9,7 +9,7 @@ git-am - Apply a series of patches from a mailbox SYNOPSIS -------- [verse] -'git am' [--signoff] [--keep] [--utf8 | --no-utf8] +'git am' [--signoff] [--keep] [--keep-cr | --no-keep-cr] [--utf8 | --no-utf8] [--3way] [--interactive] [--committer-date-is-author-date] [--ignore-date] [--ignore-space-change | --ignore-whitespace] [--whitespace=<option>] [-C<n>] [-p<n>] [--directory=<dir>] @@ -39,6 +39,13 @@ OPTIONS --keep:: Pass `-k` flag to 'git mailinfo' (see linkgit:git-mailinfo[1]). +--keep-cr:: +--no-keep-cr:: + With `--keep-cr`, call 'git mailsplit' (see linkgit:git-mailsplit[1]) + with the same option, to prevent it from stripping CR at the end of + lines. `am.keepcr` configuration variable can be used to specify the + default behaviour. `--no-keep-cr` is useful to override `am.keepcr`. + -c:: --scissors:: Remove everything in body before a scissors line (see diff --git a/Documentation/git-apply.txt b/Documentation/git-apply.txt index 8463439ac5..4a74b23d40 100644 --- a/Documentation/git-apply.txt +++ b/Documentation/git-apply.txt @@ -26,6 +26,10 @@ with the `--cache` option the patch is only applied to the index. Without these options, the command applies the patch only to files, and does not require them to be in a git repository. +This command applies the patch but does not create a commit. Use +linkgit:git-am[1] to create commits from patches generated by +linkgit:git-format-patch[1] and/or received by email. + OPTIONS ------- <patch>...:: @@ -242,6 +246,12 @@ If `--index` is not specified, then the submodule commits in the patch are ignored and only the absence or presence of the corresponding subdirectory is checked and (if possible) updated. + +SEE ALSO +-------- +linkgit:git-am[1]. + + Author ------ Written by Linus Torvalds <torvalds@osdl.org> diff --git a/Documentation/git-branch.txt b/Documentation/git-branch.txt index 60fa684b1d..1940256930 100644 --- a/Documentation/git-branch.txt +++ b/Documentation/git-branch.txt @@ -8,7 +8,7 @@ git-branch - List, create, or delete branches SYNOPSIS -------- [verse] -'git branch' [--color | --no-color] [-r | -a] +'git branch' [--color[=<when>] | --no-color] [-r | -a] [-v [--abbrev=<length> | --no-abbrev]] [(--merged | --no-merged | --contains) [<commit>]] 'git branch' [--set-upstream | --track | --no-track] [-l] [-f] <branchname> [<start-point>] @@ -88,12 +88,14 @@ OPTIONS -M:: Move/rename a branch even if the new branch name already exists. ---color:: +--color[=<when>]:: Color branches to highlight current, local, and remote branches. + The value must be always (the default), never, or auto. --no-color:: Turn off branch colors, even when the configuration file gives the default to color output. + Same as `--color=never`. -r:: List or delete (if used with -d) the remote-tracking branches. diff --git a/Documentation/git-cat-file.txt b/Documentation/git-cat-file.txt index 58c8d65772..a3f56b07fd 100644 --- a/Documentation/git-cat-file.txt +++ b/Documentation/git-cat-file.txt @@ -9,14 +9,15 @@ git-cat-file - Provide content or type and size information for repository objec SYNOPSIS -------- [verse] -'git cat-file' (-t | -s | -e | -p | <type>) <object> +'git cat-file' (-t | -s | -e | -p | <type> | --textconv ) <object> 'git cat-file' (--batch | --batch-check) < <list-of-objects> DESCRIPTION ----------- In its first form, the command provides the content or the type of an object in the repository. The type is required unless '-t' or '-p' is used to find the -object type, or '-s' is used to find the object size. +object type, or '-s' is used to find the object size, or '--textconv' is used +(which implies type "blob"). In the second form, a list of objects (separated by linefeeds) is provided on stdin, and the SHA1, type, and size of each object is printed on stdout. @@ -26,7 +27,7 @@ OPTIONS <object>:: The name of the object to show. For a more complete list of ways to spell object names, see - the "SPECIFYING REVISIONS" section in linkgit:git-rev-parse[1]. + the "SPECIFYING REVISIONS" section in linkgit:gitrevisions[1]. -t:: Instead of the content, show the object type identified by @@ -51,6 +52,11 @@ OPTIONS or to ask for a "blob" with <object> being a tag object that points at it. +--textconv:: + Show the content as transformed by a textconv filter. In this case, + <object> has be of the form <treeish>:<path>, or :<path> in order + to apply the filter to the content recorded in the index at <path>. + --batch:: Print the SHA1, type, size, and contents of each object provided on stdin. May not be combined with any other options or arguments. diff --git a/Documentation/git-check-ref-format.txt b/Documentation/git-check-ref-format.txt index 379eee6734..f5c2e0601d 100644 --- a/Documentation/git-check-ref-format.txt +++ b/Documentation/git-check-ref-format.txt @@ -49,7 +49,7 @@ git imposes the following rules on how references are named: These rules make it easy for shell script based tools to parse reference names, pathname expansion by the shell when a reference name is used unquoted (by mistake), and also avoids ambiguities in certain -reference name expressions (see linkgit:git-rev-parse[1]): +reference name expressions (see linkgit:gitrevisions[1]): . A double-dot `..` is often used as in `ref1..ref2`, and in some contexts this notation means `{caret}ref1 ref2` (i.e. not in diff --git a/Documentation/git-checkout.txt b/Documentation/git-checkout.txt index 37c1810e3f..1bacd2e104 100644 --- a/Documentation/git-checkout.txt +++ b/Documentation/git-checkout.txt @@ -9,39 +9,47 @@ SYNOPSIS -------- [verse] 'git checkout' [-q] [-f] [-m] [<branch>] -'git checkout' [-q] [-f] [-m] [-b <new_branch>] [<start_point>] +'git checkout' [-q] [-f] [-m] [[-b|--orphan] <new_branch>] [<start_point>] 'git checkout' [-f|--ours|--theirs|-m|--conflict=<style>] [<tree-ish>] [--] <paths>... 'git checkout' --patch [<tree-ish>] [--] [<paths>...] DESCRIPTION ----------- - -When <paths> are not given, this command switches branches by -updating the index, working tree, and HEAD to reflect the specified +Updates files in the working tree to match the version in the index +or the specified tree. If no paths are given, 'git checkout' will +also update `HEAD` to set the specified branch as the current branch. -If `-b` is given, a new branch is created and checked out, as if -linkgit:git-branch[1] were called; in this case you can -use the --track or --no-track options, which will be passed to `git -branch`. As a convenience, --track without `-b` implies branch -creation; see the description of --track below. - -When <paths> or --patch are given, this command does *not* switch -branches. It updates the named paths in the working tree from -the index file, or from a named <tree-ish> (most often a commit). In -this case, the `-b` and `--track` options are meaningless and giving -either of them results in an error. The <tree-ish> argument can be -used to specify a specific tree-ish (i.e. commit, tag or tree) -to update the index for the given paths before updating the -working tree. - -The index may contain unmerged entries after a failed merge. By -default, if you try to check out such an entry from the index, the +'git checkout' [<branch>]:: +'git checkout' -b <new branch> [<start point>]:: + + This form switches branches by updating the index, working + tree, and HEAD to reflect the specified branch. ++ +If `-b` is given, a new branch is created as if linkgit:git-branch[1] +were called and then checked out; in this case you can +use the `--track` or `--no-track` options, which will be passed to +'git branch'. As a convenience, `--track` without `-b` implies branch +creation; see the description of `--track` below. + +'git checkout' [--patch] [<tree-ish>] [--] <pathspec>...:: + + When <paths> or `--patch` are given, 'git checkout' *not* switch + branches. It updates the named paths in the working tree from + the index file or from a named <tree-ish> (most often a commit). In + this case, the `-b` and `--track` options are meaningless and giving + either of them results in an error. The <tree-ish> argument can be + used to specify a specific tree-ish (i.e. commit, tag or tree) + to update the index for the given paths before updating the + working tree. ++ +The index may contain unmerged entries because of a previous failed merge. +By default, if you try to check out such an entry from the index, the checkout operation will fail and nothing will be checked out. -Using -f will ignore these unmerged entries. The contents from a +Using `-f` will ignore these unmerged entries. The contents from a specific side of the merge can be checked out of the index by -using --ours or --theirs. With -m, changes made to the working tree -file can be discarded to recreate the original conflicted merge result. +using `--ours` or `--theirs`. With `-m`, changes made to the working tree +file can be discarded to re-create the original conflicted merge result. OPTIONS ------- @@ -90,6 +98,31 @@ explicitly give a name with '-b' in such a case. Create the new branch's reflog; see linkgit:git-branch[1] for details. +--orphan:: + Create a new 'orphan' branch, named <new_branch>, started from + <start_point> and switch to it. The first commit made on this + new branch will have no parents and it will be the root of a new + history totally disconnected from all the other branches and + commits. ++ +The index and the working tree are adjusted as if you had previously run +"git checkout <start_point>". This allows you to start a new history +that records a set of paths similar to <start_point> by easily running +"git commit -a" to make the root commit. ++ +This can be useful when you want to publish the tree from a commit +without exposing its full history. You might want to do this to publish +an open source branch of a project whose current tree is "clean", but +whose full history contains proprietary or otherwise encumbered bits of +code. ++ +If you want to start a disconnected history that records a set of paths +that is totally different from the one of <start_point>, then you should +clear the index and the working tree right after creating the orphan +branch by running "git rm -rf ." from the top level of the working tree. +Afterwards you will be ready to prepare your new files, repopulating the +working tree, by copying them from elsewhere, extracting a tarball, etc. + -m:: --merge:: When switching branches, @@ -136,6 +169,10 @@ edits from your current working tree. As a special case, the `"@\{-N\}"` syntax for the N-th last branch checks out the branch (instead of detaching). You may also specify `-` which is synonymous with `"@\{-1\}"`. ++ +As a further special case, you may use `"A...B"` as a shortcut for the +merge base of `A` and `B` if there is exactly one merge base. You can +leave out at most one of `A` and `B`, in which case it defaults to `HEAD`. <new_branch>:: Name for the new branch. @@ -226,7 +263,7 @@ the above checkout would fail like this: + ------------ $ git checkout mytopic -fatal: Entry 'frotz' not uptodate. Cannot merge. +error: You have local changes to 'frotz'; not switching branches. ------------ + You can give the `-m` flag to the command, which would try a diff --git a/Documentation/git-cherry-pick.txt b/Documentation/git-cherry-pick.txt index 78f4714da0..2cef579316 100644 --- a/Documentation/git-cherry-pick.txt +++ b/Documentation/git-cherry-pick.txt @@ -3,24 +3,28 @@ git-cherry-pick(1) NAME ---- -git-cherry-pick - Apply the change introduced by an existing commit +git-cherry-pick - Apply the changes introduced by some existing commits SYNOPSIS -------- -'git cherry-pick' [--edit] [-n] [-m parent-number] [-s] [-x] <commit> +'git cherry-pick' [--edit] [-n] [-m parent-number] [-s] [-x] [--ff] <commit>... DESCRIPTION ----------- -Given one existing commit, apply the change the patch introduces, and record a -new commit that records it. This requires your working tree to be clean (no -modifications from the HEAD commit). + +Given one or more existing commits, apply the change each one +introduces, recording a new commit for each. This requires your +working tree to be clean (no modifications from the HEAD commit). OPTIONS ------- -<commit>:: - Commit to cherry-pick. - For a more complete list of ways to spell commits, see the - "SPECIFYING REVISIONS" section in linkgit:git-rev-parse[1]. +<commit>...:: + Commits to cherry-pick. + For a more complete list of ways to spell commits, see + linkgit:gitrevisions[1]. + Sets of commits can be passed but no traversal is done by + default, as if the '--no-walk' option was specified, see + linkgit:git-rev-list[1]. -e:: --edit:: @@ -55,10 +59,10 @@ OPTIONS -n:: --no-commit:: - Usually the command automatically creates a commit. - This flag applies the change necessary to cherry-pick - the named commit to your working tree and the index, - but does not make the commit. In addition, when this + Usually the command automatically creates a sequence of commits. + This flag applies the changes necessary to cherry-pick + each named commit to your working tree and the index, + without making any commit. In addition, when this option is used, your index does not have to match the HEAD commit. The cherry-pick is done against the beginning state of your index. @@ -70,6 +74,51 @@ effect to your index in a row. --signoff:: Add Signed-off-by line at the end of the commit message. +--ff:: + If the current HEAD is the same as the parent of the + cherry-pick'ed commit, then a fast forward to this commit will + be performed. + +EXAMPLES +-------- +git cherry-pick master:: + + Apply the change introduced by the commit at the tip of the + master branch and create a new commit with this change. + +git cherry-pick ..master:: +git cherry-pick ^HEAD master:: + + Apply the changes introduced by all commits that are ancestors + of master but not of HEAD to produce new commits. + +git cherry-pick master\~4 master~2:: + + Apply the changes introduced by the fifth and third last + commits pointed to by master and create 2 new commits with + these changes. + +git cherry-pick -n master~1 next:: + + Apply to the working tree and the index the changes introduced + by the second last commit pointed to by master and by the last + commit pointed to by next, but do not create any commit with + these changes. + +git cherry-pick --ff ..next:: + + If history is linear and HEAD is an ancestor of next, update + the working tree and advance the HEAD pointer to match next. + Otherwise, apply the changes introduced by those commits that + are in next but not HEAD to the current branch, creating a new + commit for each new change. + +git rev-list --reverse master \-- README | git cherry-pick -n --stdin:: + + Apply the changes introduced by all commits on the master + branch that touched README to the working tree and index, + so the result can be inspected and made into a single new + commit if suitable. Author ------ @@ -79,6 +128,10 @@ Documentation -------------- Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. +SEE ALSO +-------- +linkgit:git-revert[1] + GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-clone.txt b/Documentation/git-clone.txt index d15cb17d78..dc7d3d17b1 100644 --- a/Documentation/git-clone.txt +++ b/Documentation/git-clone.txt @@ -102,7 +102,8 @@ objects from the source repository into a pack in the cloned repository. --verbose:: -v:: - Run verbosely. + Run verbosely. Does not affect the reporting of progress status + to the standard error stream. --progress:: Progress status is reported on the standard error stream @@ -149,8 +150,7 @@ objects from the source repository into a pack in the cloned repository. --template=<template_directory>:: Specify the directory from which templates will be used; - if unset the templates are taken from the installation - defined default, typically `/usr/share/git-core/templates`. + (See the "TEMPLATE DIRECTORY" section of linkgit:git-init[1].) --depth <depth>:: Create a 'shallow' clone with a history truncated to the diff --git a/Documentation/git-commit.txt b/Documentation/git-commit.txt index 64fb458b45..c28603ecf5 100644 --- a/Documentation/git-commit.txt +++ b/Documentation/git-commit.txt @@ -10,7 +10,7 @@ SYNOPSIS [verse] 'git commit' [-a | --interactive] [-s] [-v] [-u<mode>] [--amend] [--dry-run] [(-c | -C) <commit>] [-F <file> | -m <msg>] [--reset-author] - [--allow-empty] [--no-verify] [-e] [--author=<author>] + [--allow-empty] [--allow-empty-message] [--no-verify] [-e] [--author=<author>] [--date=<date>] [--cleanup=<mode>] [--status | --no-status] [--] [[-i | -o ]<file>...] @@ -95,10 +95,11 @@ OPTIONS read the message from the standard input. --author=<author>:: - Override the author name used in the commit. You can use the - standard `A U Thor <author@example.com>` format. Otherwise, - an existing commit that matches the given string and its author - name is used. + Override the commit author. Specify an explicit author using the + standard `A U Thor <author@example.com>` format. Otherwise <author> + is assumed to be a pattern and is used to search for an existing + commit by that author (i.e. rev-list --all -i --author=<author>); + the commit author is then copied from the first such commit found. --date=<date>:: Override the author date used in the commit. @@ -131,6 +132,12 @@ OPTIONS from making such a commit. This option bypasses the safety, and is primarily for use by foreign scm interface scripts. +--allow-empty-message:: + Like --allow-empty this command is primarily for use by foreign + scm interface scripts. It allows you to create a commit with an + empty commit message without using plumbing commands like + linkgit:git-commit-tree[1]. + --cleanup=<mode>:: This option sets how the commit message is cleaned up. The '<mode>' can be one of 'verbatim', 'whitespace', 'strip', diff --git a/Documentation/git-cvsimport.txt b/Documentation/git-cvsimport.txt index ddfcb3d143..8bcd875a67 100644 --- a/Documentation/git-cvsimport.txt +++ b/Documentation/git-cvsimport.txt @@ -13,7 +13,7 @@ SYNOPSIS [-A <author-conv-file>] [-p <options-for-cvsps>] [-P <file>] [-C <git_repository>] [-z <fuzz>] [-i] [-k] [-u] [-s <subst>] [-a] [-m] [-M <regex>] [-S <regex>] [-L <commitlimit>] - [-r <remote>] [<CVS_module>] + [-r <remote>] [-R] [<CVS_module>] DESCRIPTION @@ -157,6 +157,22 @@ It is not recommended to use this feature if you intend to export changes back to CVS again later with 'git cvsexportcommit'. +-R:: + Generate a `$GIT_DIR/cvs-revisions` file containing a mapping from CVS + revision numbers to newly-created Git commit IDs. The generated file + will contain one line for each (filename, revision) pair imported; + each line will look like ++ +--------- +src/widget.c 1.1 1d862f173cdc7325b6fa6d2ae1cfd61fd1b512b7 +--------- ++ +The revision data is appended to the file if it already exists, for use when +doing incremental imports. ++ +This option may be useful if you have CVS revision numbers stored in commit +messages, bug-tracking systems, email archives, and the like. + -h:: Print a short usage message and exit. diff --git a/Documentation/git-cvsserver.txt b/Documentation/git-cvsserver.txt index dbb053ee17..7004dd2dec 100644 --- a/Documentation/git-cvsserver.txt +++ b/Documentation/git-cvsserver.txt @@ -72,9 +72,6 @@ plugin. Most functionality works fine with both of these clients. LIMITATIONS ----------- -Currently cvsserver works over SSH connections for read/write clients, and -over pserver for anonymous CVS access. - CVS clients cannot tag, branch or perform GIT merges. 'git-cvsserver' maps GIT branches to CVS modules. This is very different @@ -84,7 +81,7 @@ one or more directories. INSTALLATION ------------ -1. If you are going to offer anonymous CVS access via pserver, add a line in +1. If you are going to offer CVS access via pserver, add a line in /etc/inetd.conf like + -- @@ -101,6 +98,38 @@ looks like cvspserver stream tcp nowait nobody /usr/bin/git-cvsserver git-cvsserver pserver ------ + +Only anonymous access is provided by pserve by default. To commit you +will have to create pserver accounts, simply add a gitcvs.authdb +setting in the config file of the repositories you want the cvsserver +to allow writes to, for example: + +------ + + [gitcvs] + authdb = /etc/cvsserver/passwd + +------ +The format of these files is username followed by the crypted password, +for example: + +------ + myuser:$1Oyx5r9mdGZ2 + myuser:$1$BA)@$vbnMJMDym7tA32AamXrm./ +------ +You can use the 'htpasswd' facility that comes with Apache to make these +files, but Apache's MD5 crypt method differs from the one used by most C +library's crypt() function, so don't use the -m option. + +Alternatively you can produce the password with perl's crypt() operator: +----- + perl -e 'my ($user, $pass) = @ARGV; printf "%s:%s\n", $user, crypt($user, $pass)' $USER password +----- + +Then provide your password via the pserver method, for example: +------ + cvs -d:pserver:someuser:somepassword <at> server/path/repo.git co <HEAD_name> +------ No special setup is needed for SSH access, other than having GIT tools in the PATH. If you have clients that do not accept the CVS_SERVER environment variable, you can rename 'git-cvsserver' to `cvs`. @@ -340,16 +369,13 @@ By default the server leaves the '-k' mode blank for all files, which causes the cvs client to treat them as a text files, subject to crlf conversion on some platforms. -You can make the server use `crlf` attributes to set the '-k' modes -for files by setting the `gitcvs.usecrlfattr` config variable. -In this case, if `crlf` is explicitly unset ('-crlf'), then the -server will set '-kb' mode for binary files. If `crlf` is set, -then the '-k' mode will explicitly be left blank. See -also linkgit:gitattributes[5] for more information about the `crlf` -attribute. +You can make the server use the end-of-line conversion attributes to +set the '-k' modes for files by setting the `gitcvs.usecrlfattr` +config variable. See linkgit:gitattributes[5] for more information +about end-of-line conversion. Alternatively, if `gitcvs.usecrlfattr` config is not enabled -or if the `crlf` attribute is unspecified for a filename, then +or the attributes do not allow automatic detection for a filename, then the server uses the `gitcvs.allbinary` config for the default setting. If `gitcvs.allbinary` is set, then file not otherwise specified will default to '-kb' mode. Otherwise the '-k' mode diff --git a/Documentation/git-diff.txt b/Documentation/git-diff.txt index 723a64872f..08fd4099ad 100644 --- a/Documentation/git-diff.txt +++ b/Documentation/git-diff.txt @@ -68,11 +68,11 @@ for the last two forms that use ".." notations, can be any <tree-ish>. For a more complete list of ways to spell <commit>, see -"SPECIFYING REVISIONS" section in linkgit:git-rev-parse[1]. +"SPECIFYING REVISIONS" section in linkgit:gitrevisions[1]. However, "diff" is about comparing two _endpoints_, not ranges, and the range notations ("<commit>..<commit>" and "<commit>\...<commit>") do not mean a range as defined in the -"SPECIFYING RANGES" section in linkgit:git-rev-parse[1]. +"SPECIFYING RANGES" section in linkgit:gitrevisions[1]. OPTIONS ------- diff --git a/Documentation/git-fast-import.txt b/Documentation/git-fast-import.txt index 19082b04eb..77a0a2481a 100644 --- a/Documentation/git-fast-import.txt +++ b/Documentation/git-fast-import.txt @@ -439,7 +439,7 @@ Marks must be declared (via `mark`) before they can be used. * A complete 40 byte or abbreviated commit SHA-1 in hex. * Any valid Git SHA-1 expression that resolves to a commit. See - ``SPECIFYING REVISIONS'' in linkgit:git-rev-parse[1] for details. + ``SPECIFYING REVISIONS'' in linkgit:gitrevisions[1] for details. The special case of restarting an incremental import from the current branch value should be written as: diff --git a/Documentation/git-for-each-ref.txt b/Documentation/git-for-each-ref.txt index 7e83288d18..390d85ccae 100644 --- a/Documentation/git-for-each-ref.txt +++ b/Documentation/git-for-each-ref.txt @@ -86,6 +86,7 @@ objectsize:: objectname:: The object name (aka SHA-1). + For a non-ambiguous abbreviation of the object name append `:short`. upstream:: The name of a local ref which can be considered ``upstream'' diff --git a/Documentation/git-format-patch.txt b/Documentation/git-format-patch.txt index 9674f9de67..4b3f5ba535 100644 --- a/Documentation/git-format-patch.txt +++ b/Documentation/git-format-patch.txt @@ -13,12 +13,13 @@ SYNOPSIS [--no-thread | --thread[=<style>]] [(--attach|--inline)[=<boundary>] | --no-attach] [-s | --signoff] + [--signature=<signature> | --no-signature] [-n | --numbered | -N | --no-numbered] [--start-number <n>] [--numbered-files] [--in-reply-to=Message-Id] [--suffix=.<sfx>] [--ignore-if-in-upstream] [--subject-prefix=Subject-Prefix] - [--cc=<email>] + [--to=<email>] [--cc=<email>] [--cover-letter] [<common diff options>] [ <since> | <revision range> ] @@ -38,7 +39,7 @@ There are two ways to specify which commits to operate on. that leads to the <since> to be output. 2. Generic <revision range> expression (see "SPECIFYING - REVISIONS" section in linkgit:git-rev-parse[1]) means the + REVISIONS" section in linkgit:gitrevisions[1]) means the commits in the specified range. The first rule takes precedence in the case of a single <commit>. To @@ -162,6 +163,10 @@ will want to ensure that threading is disabled for `git send-email`. allows for useful naming of a patch series, and can be combined with the `--numbered` option. +--to=<email>:: + Add a `To:` header to the email headers. This is in addition + to any configured headers, and may be used multiple times. + --cc=<email>:: Add a `Cc:` header to the email headers. This is in addition to any configured headers, and may be used multiple times. @@ -176,6 +181,12 @@ will want to ensure that threading is disabled for `git send-email`. containing the shortlog and the overall diffstat. You can fill in a description in the file before sending it out. +--[no]-signature=<signature>:: + Add a signature to each message produced. Per RFC 3676 the signature + is separated from the body by a line with '-- ' on it. If the + signature option is omitted the signature defaults to the git version + number. + --suffix=.<sfx>:: Instead of using `.patch` as the suffix for generated filenames, use specified suffix. A common alternative is @@ -202,8 +213,8 @@ CONFIGURATION ------------- You can specify extra mail header lines to be added to each message, defaults for the subject prefix and file suffix, number patches when -outputting more than one patch, add "Cc:" headers, configure attachments, -and sign off patches with configuration variables. +outputting more than one patch, add "To" or "Cc:" headers, configure +attachments, and sign off patches with configuration variables. ------------ [format] @@ -211,6 +222,7 @@ and sign off patches with configuration variables. subjectprefix = CHANGE suffix = .txt numbered = auto + to = <email> cc = <email> attach [ = mime-boundary-string ] signoff = true diff --git a/Documentation/git-gc.txt b/Documentation/git-gc.txt index 189573a3b3..315f07ef1c 100644 --- a/Documentation/git-gc.txt +++ b/Documentation/git-gc.txt @@ -88,6 +88,16 @@ commits prior to the amend or rebase occurring. Since these changes are not part of the current project most users will want to expire them sooner. This option defaults to '30 days'. +The above two configuration variables can be given to a pattern. For +example, this sets non-default expiry values only to remote tracking +branches: + +------------ +[gc "refs/remotes/*"] + reflogExpire = never + reflogexpireUnreachable = 3 days +------------ + The optional configuration variable 'gc.rerereresolved' indicates how long records of conflicted merge you resolved earlier are kept. This defaults to 60 days. @@ -127,6 +137,13 @@ If you are expecting some objects to be collected and they aren't, check all of those locations and decide whether it makes sense in your case to remove those references. +HOOKS +----- + +The 'git gc --auto' command will run the 'pre-auto-gc' hook. See +linkgit:githooks[5] for more information. + + SEE ALSO -------- linkgit:git-prune[1] diff --git a/Documentation/git-grep.txt b/Documentation/git-grep.txt index ee506e67f0..5474dd7f94 100644 --- a/Documentation/git-grep.txt +++ b/Documentation/git-grep.txt @@ -14,10 +14,11 @@ SYNOPSIS [-E | --extended-regexp] [-G | --basic-regexp] [-F | --fixed-strings] [-n] [-l | --files-with-matches] [-L | --files-without-match] + [(-O | --open-files-in-pager) [<pager>]] [-z | --null] [-c | --count] [--all-match] [-q | --quiet] [--max-depth <depth>] - [--color | --no-color] + [--color[=<when>] | --no-color] [-A <post-context>] [-B <pre-context>] [-C <context>] [-f <file>] [-e] <pattern> [--and|--or|--not|(|)|-e <pattern>...] @@ -104,6 +105,13 @@ OPTIONS For better compatibility with 'git diff', `--name-only` is a synonym for `--files-with-matches`. +-O [<pager>]:: +--open-files-in-pager [<pager>]:: + Open the matching files in the pager (not the output of 'grep'). + If the pager happens to be "less" or "vi", and the user + specified only one pattern, the first file is positioned at + the first match automatically. + -z:: --null:: Output \0 instead of the character that normally follows a @@ -114,12 +122,14 @@ OPTIONS Instead of showing every matched line, show the number of lines that match. ---color:: +--color[=<when>]:: Show colored matches. + The value must be always (the default), never, or auto. --no-color:: Turn off match highlighting, even when the configuration file gives the default to color output. + Same as `--color=never`. -[ABC] <context>:: Show `context` trailing (`A` -- after), or leading (`B` @@ -181,7 +191,7 @@ OPTIONS Examples -------- -git grep 'time_t' -- '*.[ch]':: +git grep 'time_t' \-- '*.[ch]':: Looks for `time_t` in all tracked .c and .h files in the working directory and its subdirectories. diff --git a/Documentation/git-hash-object.txt b/Documentation/git-hash-object.txt index 479fce4693..6904739a48 100644 --- a/Documentation/git-hash-object.txt +++ b/Documentation/git-hash-object.txt @@ -10,7 +10,7 @@ SYNOPSIS -------- [verse] 'git hash-object' [-t <type>] [-w] [--path=<file>|--no-filters] [--stdin] [--] <file>... -'git hash-object' [-t <type>] [-w] --stdin-paths < <list-of-paths> +'git hash-object' [-t <type>] [-w] --stdin-paths [--no-filters] < <list-of-paths> DESCRIPTION ----------- diff --git a/Documentation/git-imap-send.txt b/Documentation/git-imap-send.txt index ad446b0e8b..57aba42e66 100644 --- a/Documentation/git-imap-send.txt +++ b/Documentation/git-imap-send.txt @@ -73,6 +73,10 @@ imap.preformattedHTML:: option causes Thunderbird to send the patch as a plain/text, format=fixed email. Default is `false`. +imap.authMethod:: + Specify authenticate method for authentication with IMAP server. + Current supported method is 'CRAM-MD5' only. + Examples ~~~~~~~~ diff --git a/Documentation/git-init.txt b/Documentation/git-init.txt index 7ee102da48..246b07ebf9 100644 --- a/Documentation/git-init.txt +++ b/Documentation/git-init.txt @@ -28,14 +28,8 @@ current working directory. --template=<template_directory>:: -Provide the directory from which templates will be used. The default template -directory is `/usr/share/git-core/templates`. - -When specified, `<template_directory>` is used as the source of the template -files rather than the default. The template files include some directory -structure, some suggested "exclude patterns", and copies of non-executing -"hook" files. The suggested patterns and hook files are all modifiable and -extensible. +Specify the directory from which templates will be used. (See the "TEMPLATE +DIRECTORY" section below.) --shared[={false|true|umask|group|all|world|everybody|0xxx}]:: @@ -106,6 +100,25 @@ of the repository, such as installing the default hooks and setting the configuration variables. The old name is retained for backward compatibility reasons. +TEMPLATE DIRECTORY +------------------ + +The template directory contains files and directories that will be copied to +the `$GIT_DIR` after it is created. + +The template directory used will (in order): + + - The argument given with the `--template` option. + + - The contents of the `$GIT_TEMPLATE_DIR` environment variable. + + - The `init.templatedir` configuration variable. + + - The default template directory: `/usr/share/git-core/templates`. + +The default template directory includes some directory structure, some +suggested "exclude patterns", and copies of sample "hook" files. +The suggested patterns and hook files are all modifiable and extensible. EXAMPLES -------- diff --git a/Documentation/git-instaweb.txt b/Documentation/git-instaweb.txt index a1f17df074..2c3c4d2994 100644 --- a/Documentation/git-instaweb.txt +++ b/Documentation/git-instaweb.txt @@ -29,7 +29,7 @@ OPTIONS The HTTP daemon command-line that will be executed. Command-line options may be specified here, and the configuration file will be added at the end of the command-line. - Currently apache2, lighttpd, mongoose and webrick are supported. + Currently apache2, lighttpd, mongoose, plackup and webrick are supported. (Default: lighttpd) -m:: diff --git a/Documentation/git-log.txt b/Documentation/git-log.txt index 0e39bb61ee..c213bdbdc5 100644 --- a/Documentation/git-log.txt +++ b/Documentation/git-log.txt @@ -23,9 +23,6 @@ each commit introduces are shown. OPTIONS ------- -:git-log: 1 -include::diff-options.txt[] - -<n>:: Limits the number of commits to show. @@ -34,10 +31,14 @@ include::diff-options.txt[] either <since> or <until> is omitted, it defaults to `HEAD`, i.e. the tip of the current branch. For a more complete list of ways to spell <since> - and <until>, see "SPECIFYING REVISIONS" section in - linkgit:git-rev-parse[1]. + and <until>, see linkgit:gitrevisions[1]. ---decorate[=short|full]:: +--follow:: + Continue listing the history of a file beyond renames + (works only for a single file). + +--no-decorate:: +--decorate[=short|full|no]:: Print out the ref names of any commits that are shown. If 'short' is specified, the ref name prefixes 'refs/heads/', 'refs/tags/' and 'refs/remotes/' will not be printed. If 'full' is specified, the @@ -54,9 +55,9 @@ include::diff-options.txt[] paths. With this, the full diff is shown for commits that touch the specified paths; this means that "<path>..." limits only commits, and doesn't limit diff for those commits. - ---follow:: - Continue listing the history of a file beyond renames. ++ +Note that this affects all diff-based output types, e.g. those +produced by --stat etc. --log-size:: Before the log message print out its size in bytes. Intended @@ -71,6 +72,11 @@ include::diff-options.txt[] to be prefixed with "\-- " to separate them from options or refnames. +Common diff options +~~~~~~~~~~~~~~~~~~~ + +:git-log: 1 +include::diff-options.txt[] include::rev-list-options.txt[] @@ -118,11 +124,62 @@ git log master --not --remotes=*/master:: Shows all commits that are in local master but not in any remote repository master branches. +git log -p -m --first-parent:: + + Shows the history including change diffs, but only from the + "main branch" perspective, skipping commits that come from merged + branches, and showing full diffs of changes introduced by the merges. + This makes sense only when following a strict policy of merging all + topic branches when staying on a single integration branch. + + Discussion ---------- include::i18n.txt[] +Configuration +------------- + +See linkgit:git-config[1] for core variables and linkgit:git-diff[1] +for settings related to diff generation. + +format.pretty:: + Default for the `--format` option. (See "PRETTY FORMATS" above.) + Defaults to "medium". + +i18n.logOutputEncoding:: + Encoding to use when displaying logs. (See "Discussion", above.) + Defaults to the value of `i18n.commitEncoding` if set, UTF-8 + otherwise. + +log.date:: + Default format for human-readable dates. (Compare the + `--date` option.) Defaults to "default", which means to write + dates like `Sat May 8 19:35:34 2010 -0500`. + +log.showroot:: + If `false`, 'git log' and related commands will not treat the + initial commit as a big creation event. Any root commits in + `git log -p` output would be shown without a diff attached. + The default is `true`. + +mailmap.file:: + See linkgit:git-shortlog[1]. + +notes.displayRef:: + Which refs, in addition to the default set by `core.notesRef` + or 'GIT_NOTES_REF', to read notes from when showing commit + messages with the 'log' family of commands. See + linkgit:git-notes[1]. ++ +May be an unabbreviated ref name or a glob and may be specified +multiple times. A warning will be issued for refs that do not exist, +but a glob that does not match any refs is silently ignored. ++ +This setting can be disabled by the `--no-standard-notes` option, +overridden by the 'GIT_NOTES_DISPLAY_REF' environment variable, +and supplemented by the `--show-notes` option. Author ------ diff --git a/Documentation/git-ls-files.txt b/Documentation/git-ls-files.txt index 3521637b58..bd919f2dfd 100644 --- a/Documentation/git-ls-files.txt +++ b/Documentation/git-ls-files.txt @@ -106,8 +106,16 @@ OPTIONS with `-s` or `-u` options does not make any sense. -t:: - Identify the file status with the following tags (followed by - a space) at the start of each line: + This feature is semi-deprecated. For scripting purpose, + linkgit:git-status[1] `--porcelain` and + linkgit:git-diff-files[1] `--name-status` are almost always + superior alternatives, and users should look at + linkgit:git-status[1] `--short` or linkgit:git-diff[1] + `--name-status` for more user-friendly alternatives. ++ +This option identifies the file status with the following tags (followed by +a space) at the start of each line: + H:: cached S:: skip-worktree M:: unmerged diff --git a/Documentation/git-mailinfo.txt b/Documentation/git-mailinfo.txt index e3d58cbac3..3ea5aad56c 100644 --- a/Documentation/git-mailinfo.txt +++ b/Documentation/git-mailinfo.txt @@ -40,16 +40,16 @@ OPTIONS -u:: The commit log message, author name and author email are taken from the e-mail, and after minimally decoding MIME - transfer encoding, re-coded in UTF-8 by transliterating + transfer encoding, re-coded in the charset specified by + i18n.commitencoding (defaulting to UTF-8) by transliterating them. This used to be optional but now it is the default. + Note that the patch is always used as-is without charset conversion, even with this flag. --encoding=<encoding>:: - Similar to -u but if the local convention is different - from what is specified by i18n.commitencoding, this flag - can be used to override it. + Similar to -u. But when re-coding, the charset specified here is + used instead of the one specified by i18n.commitencoding or UTF-8. -n:: Disable all charset re-coding of the metadata. diff --git a/Documentation/git-mailsplit.txt b/Documentation/git-mailsplit.txt index 5cc94ec53d..a634485281 100644 --- a/Documentation/git-mailsplit.txt +++ b/Documentation/git-mailsplit.txt @@ -7,7 +7,7 @@ git-mailsplit - Simple UNIX mbox splitter program SYNOPSIS -------- -'git mailsplit' [-b] [-f<nn>] [-d<prec>] -o<directory> [--] [<mbox>|<Maildir>...] +'git mailsplit' [-b] [-f<nn>] [-d<prec>] [--keep-cr] -o<directory> [--] [<mbox>|<Maildir>...] DESCRIPTION ----------- @@ -43,6 +43,9 @@ OPTIONS Skip the first <nn> numbers, for example if -f3 is specified, start the numbering with 0004. +--keep-cr:: + Do not remove `\r` from lines ending with `\r\n`. + Author ------ Written by Linus Torvalds <torvalds@osdl.org> diff --git a/Documentation/git-merge-file.txt b/Documentation/git-merge-file.txt index 234269ae59..f334d694e0 100644 --- a/Documentation/git-merge-file.txt +++ b/Documentation/git-merge-file.txt @@ -10,7 +10,7 @@ SYNOPSIS -------- [verse] 'git merge-file' [-L <current-name> [-L <base-name> [-L <other-name>]]] - [--ours|--theirs] [-p|--stdout] [-q|--quiet] + [--ours|--theirs|--union] [-p|--stdout] [-q|--quiet] [--marker-size=<n>] <current-file> <base-file> <other-file> @@ -35,9 +35,10 @@ normally outputs a warning and brackets the conflict with lines containing >>>>>>> B If there are conflicts, the user should edit the result and delete one of -the alternatives. When `--ours` or `--theirs` option is in effect, however, -these conflicts are resolved favouring lines from `<current-file>` or -lines from `<other-file>` respectively. +the alternatives. When `--ours`, `--theirs`, or `--union` option is in effect, +however, these conflicts are resolved favouring lines from `<current-file>`, +lines from `<other-file>`, or lines from both respectively. The length of the +conflict markers can be given with the `--marker-size` option. The exit value of this program is negative on error, and the number of conflicts otherwise. If the merge was clean, the exit value is 0. @@ -67,8 +68,9 @@ OPTIONS --ours:: --theirs:: +--union:: Instead of leaving conflicts in the file, resolve conflicts - favouring our (or their) side of the lines. + favouring our (or their or both) side of the lines. EXAMPLES diff --git a/Documentation/git-merge.txt b/Documentation/git-merge.txt index c2325ef90e..84043cc5b2 100644 --- a/Documentation/git-merge.txt +++ b/Documentation/git-merge.txt @@ -58,7 +58,12 @@ include::merge-options.txt[] -m <msg>:: Set the commit message to be used for the merge commit (in - case one is created). The 'git fmt-merge-msg' command can be + case one is created). + + If `--log` is specified, a shortlog of the commits being merged + will be appended to the specified message. + + The 'git fmt-merge-msg' command can be used to give a good default for automated 'git merge' invocations. diff --git a/Documentation/git-mergetool.txt b/Documentation/git-mergetool.txt index 55735faf7b..e4ed016146 100644 --- a/Documentation/git-mergetool.txt +++ b/Documentation/git-mergetool.txt @@ -72,6 +72,16 @@ success of the resolution after the custom tool has exited. This is the default behaviour; the option is provided to override any configuration settings. +TEMPORARY FILES +--------------- +`git mergetool` creates `*.orig` backup files while resolving merges. +These are safe to remove once a file has been merged and its +`git mergetool` session has completed. + +Setting the `mergetool.keepBackup` configuration variable to `false` +causes `git mergetool` to automatically remove the backup as files +are successfully merged. + Author ------ Written by Theodore Y Ts'o <tytso@mit.edu> diff --git a/Documentation/git-notes.txt b/Documentation/git-notes.txt index d4487cab52..2981d8c5ef 100644 --- a/Documentation/git-notes.txt +++ b/Documentation/git-notes.txt @@ -3,57 +3,284 @@ git-notes(1) NAME ---- -git-notes - Add/inspect commit notes +git-notes - Add or inspect object notes SYNOPSIS -------- [verse] -'git notes' (edit [-F <file> | -m <msg>] | show) [commit] +'git notes' [list [<object>]] +'git notes' add [-f] [-F <file> | -m <msg> | (-c | -C) <object>] [<object>] +'git notes' copy [-f] ( --stdin | <from-object> <to-object> ) +'git notes' append [-F <file> | -m <msg> | (-c | -C) <object>] [<object>] +'git notes' edit [<object>] +'git notes' show [<object>] +'git notes' remove [<object>] +'git notes' prune [-n | -v] + DESCRIPTION ----------- -This command allows you to add notes to commit messages, without -changing the commit. To discern these notes from the message stored -in the commit object, the notes are indented like the message, after -an unindented line saying "Notes:". +Adds, removes, or reads notes attached to objects, without touching +the objects themselves. + +By default, notes are saved to and read from `refs/notes/commits`, but +this default can be overridden. See the OPTIONS, CONFIGURATION, and +ENVIRONMENT sections below. If this ref does not exist, it will be +quietly created when it is first needed to store a note. + +A typical use of notes is to supplement a commit message without +changing the commit itself. Notes can be shown by 'git log' along with +the original commit message. To distinguish these notes from the +message stored in the commit object, the notes are indented like the +message, after an unindented line saying "Notes (<refname>):" (or +"Notes:" for `refs/notes/commits`). -To disable commit notes, you have to set the config variable -core.notesRef to the empty string. Alternatively, you can set it -to a different ref, something like "refs/notes/bugzilla". This setting -can be overridden by the environment variable "GIT_NOTES_REF". +To change which notes are shown by 'git log', see the +"notes.displayRef" configuration in linkgit:git-log[1]. + +See the "notes.rewrite.<command>" configuration for a way to carry +notes across commands that rewrite commits. SUBCOMMANDS ----------- +list:: + List the notes object for a given object. If no object is + given, show a list of all note objects and the objects they + annotate (in the format "<note object> <annotated object>"). + This is the default subcommand if no subcommand is given. + +add:: + Add notes for a given object (defaults to HEAD). Abort if the + object already has notes (use `-f` to overwrite an + existing note). + +copy:: + Copy the notes for the first object onto the second object. + Abort if the second object already has notes, or if the first + object has none (use -f to overwrite existing notes to the + second object). This subcommand is equivalent to: + `git notes add [-f] -C $(git notes list <from-object>) <to-object>` ++ +In `\--stdin` mode, take lines in the format ++ +---------- +<from-object> SP <to-object> [ SP <rest> ] LF +---------- ++ +on standard input, and copy the notes from each <from-object> to its +corresponding <to-object>. (The optional `<rest>` is ignored so that +the command can read the input given to the `post-rewrite` hook.) + +append:: + Append to the notes of an existing object (defaults to HEAD). + Creates a new notes object if needed. + edit:: - Edit the notes for a given commit (defaults to HEAD). + Edit the notes for a given object (defaults to HEAD). show:: - Show the notes for a given commit (defaults to HEAD). + Show the notes for a given object (defaults to HEAD). + +remove:: + Remove the notes for a given object (defaults to HEAD). + This is equivalent to specifying an empty note message to + the `edit` subcommand. +prune:: + Remove all notes for non-existing/unreachable objects. OPTIONS ------- +-f:: +--force:: + When adding notes to an object that already has notes, + overwrite the existing notes (instead of aborting). + -m <msg>:: +--message=<msg>:: Use the given note message (instead of prompting). - If multiple `-m` (or `-F`) options are given, their - values are concatenated as separate paragraphs. + If multiple `-m` options are given, their values + are concatenated as separate paragraphs. + Lines starting with `#` and empty lines other than a + single line between paragraphs will be stripped out. -F <file>:: +--file=<file>:: Take the note message from the given file. Use '-' to read the note message from the standard input. - If multiple `-F` (or `-m`) options are given, their - values are concatenated as separate paragraphs. + Lines starting with `#` and empty lines other than a + single line between paragraphs will be stripped out. + +-C <object>:: +--reuse-message=<object>:: + Take the note message from the given blob object (for + example, another note). + +-c <object>:: +--reedit-message=<object>:: + Like '-C', but with '-c' the editor is invoked, so that + the user can further edit the note message. + +--ref <ref>:: + Manipulate the notes tree in <ref>. This overrides + 'GIT_NOTES_REF' and the "core.notesRef" configuration. The ref + is taken to be in `refs/notes/` if it is not qualified. + +-n:: +--dry-run:: + Do not remove anything; just report the object names whose notes + would be removed. + +-v:: +--verbose:: + Report all object names whose notes are removed. + + +DISCUSSION +---------- + +Commit notes are blobs containing extra information about an object +(usually information to supplement a commit's message). These blobs +are taken from notes refs. A notes ref is usually a branch which +contains "files" whose paths are the object names for the objects +they describe, with some directory separators included for performance +reasons footnote:[Permitted pathnames have the form +'ab'`/`'cd'`/`'ef'`/`'...'`/`'abcdef...': a sequence of directory +names of two hexadecimal digits each followed by a filename with the +rest of the object ID.]. + +Every notes change creates a new commit at the specified notes ref. +You can therefore inspect the history of the notes by invoking, e.g., +`git log -p notes/commits`. Currently the commit message only records +which operation triggered the update, and the commit authorship is +determined according to the usual rules (see linkgit:git-commit[1]). +These details may change in the future. + +It is also permitted for a notes ref to point directly to a tree +object, in which case the history of the notes can be read with +`git log -p -g <refname>`. + + +EXAMPLES +-------- + +You can use notes to add annotations with information that was not +available at the time a commit was written. + +------------ +$ git notes add -m 'Tested-by: Johannes Sixt <j6t@kdbg.org>' 72a144e2 +$ git show -s 72a144e +[...] + Signed-off-by: Junio C Hamano <gitster@pobox.com> + +Notes: + Tested-by: Johannes Sixt <j6t@kdbg.org> +------------ + +In principle, a note is a regular Git blob, and any kind of +(non-)format is accepted. You can binary-safely create notes from +arbitrary files using 'git hash-object': + +------------ +$ cc *.c +$ blob=$(git hash-object -w a.out) +$ git notes --ref=built add -C "$blob" HEAD +------------ + +Of course, it doesn't make much sense to display non-text-format notes +with 'git log', so if you use such notes, you'll probably need to write +some special-purpose tools to do something useful with them. + + +CONFIGURATION +------------- + +core.notesRef:: + Notes ref to read and manipulate instead of + `refs/notes/commits`. Must be an unabbreviated ref name. + This setting can be overridden through the environment and + command line. + +notes.displayRef:: + Which ref (or refs, if a glob or specified more than once), in + addition to the default set by `core.notesRef` or + 'GIT_NOTES_REF', to read notes from when showing commit + messages with the 'git log' family of commands. + This setting can be overridden on the command line or by the + 'GIT_NOTES_DISPLAY_REF' environment variable. + See linkgit:git-log[1]. + +notes.rewrite.<command>:: + When rewriting commits with <command> (currently `amend` or + `rebase`), if this variable is `false`, git will not copy + notes from the original to the rewritten commit. Defaults to + `true`. See also "`notes.rewriteRef`" below. ++ +This setting can be overridden by the 'GIT_NOTES_REWRITE_REF' +environment variable. + +notes.rewriteMode:: + When copying notes during a rewrite, what to do if the target + commit already has a note. Must be one of `overwrite`, + `concatenate`, and `ignore`. Defaults to `concatenate`. ++ +This setting can be overridden with the `GIT_NOTES_REWRITE_MODE` +environment variable. + +notes.rewriteRef:: + When copying notes during a rewrite, specifies the (fully + qualified) ref whose notes should be copied. May be a glob, + in which case notes in all matching refs will be copied. You + may also specify this configuration several times. ++ +Does not have a default value; you must configure this variable to +enable note rewriting. ++ +Can be overridden with the 'GIT_NOTES_REWRITE_REF' environment variable. + + +ENVIRONMENT +----------- + +'GIT_NOTES_REF':: + Which ref to manipulate notes from, instead of `refs/notes/commits`. + This overrides the `core.notesRef` setting. + +'GIT_NOTES_DISPLAY_REF':: + Colon-delimited list of refs or globs indicating which refs, + in addition to the default from `core.notesRef` or + 'GIT_NOTES_REF', to read notes from when showing commit + messages. + This overrides the `notes.displayRef` setting. ++ +A warning will be issued for refs that do not exist, but a glob that +does not match any refs is silently ignored. + +'GIT_NOTES_REWRITE_MODE':: + When copying notes during a rewrite, what to do if the target + commit already has a note. + Must be one of `overwrite`, `concatenate`, and `ignore`. + This overrides the `core.rewriteMode` setting. + +'GIT_NOTES_REWRITE_REF':: + When rewriting commits, which notes to copy from the original + to the rewritten commit. Must be a colon-delimited list of + refs or globs. ++ +If not set in the environment, the list of notes to copy depends +on the `notes.rewrite.<command>` and `notes.rewriteRef` settings. Author ------ -Written by Johannes Schindelin <johannes.schindelin@gmx.de> +Written by Johannes Schindelin <johannes.schindelin@gmx.de> and +Johan Herland <johan@herland.net> Documentation ------------- -Documentation by Johannes Schindelin +Documentation by Johannes Schindelin and Johan Herland GIT --- diff --git a/Documentation/git-prune.txt b/Documentation/git-prune.txt index 15cfb7a8dc..4d673a5686 100644 --- a/Documentation/git-prune.txt +++ b/Documentation/git-prune.txt @@ -31,10 +31,12 @@ OPTIONS ------- -n:: +--dry-run:: Do not remove anything; just report what it would remove. -v:: +--verbose:: Report all removed objects. \--:: diff --git a/Documentation/git-pull.txt b/Documentation/git-pull.txt index 31f42ea21a..ab4de10358 100644 --- a/Documentation/git-pull.txt +++ b/Documentation/git-pull.txt @@ -31,6 +31,16 @@ in a state that is hard to back out of in the case of a conflict. OPTIONS ------- +-q:: +--quiet:: + This is passed to both underlying git-fetch to squelch reporting of + during transfer, and underlying git-merge to squelch output during + merging. + +-v:: +--verbose:: + Pass --verbose to git-fetch and git-merge. + Options related to merging ~~~~~~~~~~~~~~~~~~~~~~~~~~ diff --git a/Documentation/git-push.txt b/Documentation/git-push.txt index 7a4e507c4b..658ff2ff67 100644 --- a/Documentation/git-push.txt +++ b/Documentation/git-push.txt @@ -41,7 +41,7 @@ OPTIONS[[OPTIONS]] + The <src> is often the name of the branch you would want to push, but it can be any arbitrary "SHA-1 expression", such as `master~4` or -`HEAD` (see linkgit:git-rev-parse[1]). +`HEAD` (see linkgit:gitrevisions[1]). + The <dst> tells which ref on the remote side is updated with this push. Arbitrary expressions cannot be used here, an actual ref must @@ -146,14 +146,21 @@ useful if you write an alias or script around 'git push'. receiver share many of the same objects in common. The default is \--thin. +-q:: +--quiet:: + Suppress all output, including the listing of updated refs, + unless an error occurs. Progress is not reported to the standard + error stream. + -v:: --verbose:: Run verbosely. --q:: ---quiet:: - Suppress all output, including the listing of updated refs, - unless an error occurs. +--progress:: + Progress status is reported on the standard error stream + by default when it is attached to a terminal, unless -q + is specified. This flag forces progress status even if the + standard error stream is not directed to a terminal. include::urls-remotes.txt[] @@ -193,16 +200,29 @@ summary:: For a successfully pushed ref, the summary shows the old and new values of the ref in a form suitable for using as an argument to `git log` (this is `<old>..<new>` in most cases, and - `<old>...<new>` for forced non-fast-forward updates). For a - failed update, more details are given for the failure. - The string `rejected` indicates that git did not try to send the - ref at all (typically because it is not a fast-forward). The - string `remote rejected` indicates that the remote end refused - the update; this rejection is typically caused by a hook on the - remote side. The string `remote failure` indicates that the - remote end did not report the successful update of the ref - (perhaps because of a temporary error on the remote side, a - break in the network connection, or other transient error). + `<old>...<new>` for forced non-fast-forward updates). ++ +For a failed update, more details are given: ++ +-- +rejected:: + Git did not try to send the ref at all, typically because it + is not a fast-forward and you did not force the update. + +remote rejected:: + The remote end refused the update. Usually caused by a hook + on the remote side, or because the remote repository has one + of the following safety options in effect: + `receive.denyCurrentBranch` (for pushes to the checked out + branch), `receive.denyNonFastForwards` (for forced + non-fast-forward updates), `receive.denyDeletes` or + `receive.denyDeleteCurrent`. See linkgit:git-config[1]. + +remote failure:: + The remote end did not report the successful update of the ref, + perhaps because of a temporary error on the remote side, a + break in the network connection, or other transient error. +-- from:: The name of the local ref being pushed, minus its diff --git a/Documentation/git-read-tree.txt b/Documentation/git-read-tree.txt index f6037c4f6a..2e78da448f 100644 --- a/Documentation/git-read-tree.txt +++ b/Documentation/git-read-tree.txt @@ -412,6 +412,13 @@ turn `core.sparseCheckout` on in order to have sparse checkout support. +BUGS +---- +In order to match a directory with $GIT_DIR/info/sparse-checkout, +trailing slash must be used. The form without trailing slash, while +works with .gitignore, does not work with sparse checkout. + + SEE ALSO -------- linkgit:git-write-tree[1]; linkgit:git-ls-files[1]; diff --git a/Documentation/git-rebase.txt b/Documentation/git-rebase.txt index 823f2a4638..be23ad2359 100644 --- a/Documentation/git-rebase.txt +++ b/Documentation/git-rebase.txt @@ -206,6 +206,10 @@ OPTIONS --onto option is not specified, the starting point is <upstream>. May be any valid commit, and not just an existing branch name. ++ +As a special case, you may use "A...B" as a shortcut for the +merge base of A and B if there is exactly one merge base. You can +leave out at most one of A and B, in which case it defaults to HEAD. <upstream>:: Upstream branch to compare against. May be any valid commit, @@ -274,9 +278,16 @@ which makes little sense. -f:: --force-rebase:: Force the rebase even if the current branch is a descendant - of the commit you are rebasing onto. Normally the command will + of the commit you are rebasing onto. Normally non-interactive rebase will exit with the message "Current branch is up to date" in such a situation. + Incompatible with the --interactive option. ++ +You may find this (or --no-ff with an interactive rebase) helpful after +reverting a topic branch merge, as this option recreates the topic branch with +fresh commits so it can be remerged successfully without needing to "revert +the reversion" (see the +link:howto/revert-a-faulty-merge.txt[revert-a-faulty-merge How-To] for details). --ignore-whitespace:: --whitespace=<option>:: @@ -288,6 +299,7 @@ which makes little sense. --ignore-date:: These flags are passed to 'git am' to easily change the dates of the rebased commits (see linkgit:git-am[1]). + Incompatible with the --interactive option. -i:: --interactive:: @@ -298,6 +310,11 @@ which makes little sense. -p:: --preserve-merges:: Instead of ignoring merges, try to recreate them. ++ +This uses the `--interactive` machinery internally, but combining it +with the `--interactive` option explicitly is generally not a good +idea unless you know what you are doing (see BUGS below). + --root:: Rebase all commits reachable from <branch>, instead of @@ -316,7 +333,19 @@ which makes little sense. commit to be modified, and change the action of the moved commit from `pick` to `squash` (or `fixup`). + -This option is only valid when '--interactive' option is used. +This option is only valid when the '--interactive' option is used. + +--no-ff:: + With --interactive, cherry-pick all rebased commits instead of + fast-forwarding over the unchanged ones. This ensures that the + entire history of the rebased branch is composed of new commits. ++ +Without --interactive, this is a synonym for --force-rebase. ++ +You may find this helpful after reverting a topic branch merge, as this option +recreates the topic branch with fresh commits so it can be remerged +successfully without needing to "revert the reversion" (see the +link:howto/revert-a-faulty-merge.txt[revert-a-faulty-merge How-To] for details). include::merge-strategies.txt[] @@ -587,6 +616,28 @@ The ripple effect of a "hard case" recovery is especially bad: case" recovery too! +BUGS +---- +The todo list presented by `--preserve-merges --interactive` does not +represent the topology of the revision graph. Editing commits and +rewording their commit messages should work fine, but attempts to +reorder commits tend to produce counterintuitive results. + +For example, an attempt to rearrange +------------ +1 --- 2 --- 3 --- 4 --- 5 +------------ +to +------------ +1 --- 2 --- 4 --- 3 --- 5 +------------ +by moving the "pick 4" line will result in the following history: +------------ + 3 + / +1 --- 2 --- 4 --- 5 +------------ + Authors ------ Written by Junio C Hamano <gitster@pobox.com> and diff --git a/Documentation/git-reflog.txt b/Documentation/git-reflog.txt index 4eaa62b691..5a0451aaf3 100644 --- a/Documentation/git-reflog.txt +++ b/Documentation/git-reflog.txt @@ -40,7 +40,7 @@ see linkgit:git-log[1]. The reflog is useful in various git commands, to specify the old value of a reference. For example, `HEAD@\{2\}` means "where HEAD used to be two moves ago", `master@\{one.week.ago\}` means "where master used to -point to one week ago", and so on. See linkgit:git-rev-parse[1] for +point to one week ago", and so on. See linkgit:gitrevisions[1] for more details. To delete single entries from the reflog, use the subcommand "delete" diff --git a/Documentation/git-remote-helpers.txt b/Documentation/git-remote-helpers.txt index 1b5f61aa0b..3a23477ce7 100644 --- a/Documentation/git-remote-helpers.txt +++ b/Documentation/git-remote-helpers.txt @@ -3,20 +3,69 @@ git-remote-helpers(1) NAME ---- -git-remote-helpers - Helper programs for interoperation with remote git +git-remote-helpers - Helper programs to interact with remote repositories SYNOPSIS -------- -'git remote-<transport>' <remote> +'git remote-<transport>' <repository> [<URL>] DESCRIPTION ----------- -These programs are normally not used directly by end users, but are -invoked by various git programs that interact with remote repositories -when the repository they would operate on will be accessed using -transport code not linked into the main git binary. Various particular -helper programs will behave as documented here. +Remote helper programs are normally not used directly by end users, +but they are invoked by git when it needs to interact with remote +repositories git does not support natively. A given helper will +implement a subset of the capabilities documented here. When git +needs to interact with a repository using a remote helper, it spawns +the helper as an independent process, sends commands to the helper's +standard input, and expects results from the helper's standard +output. Because a remote helper runs as an independent process from +git, there is no need to re-link git to add a new helper, nor any +need to link the helper with the implementation of git. + +Every helper must support the "capabilities" command, which git will +use to determine what other commands the helper will accept. Other +commands generally concern facilities like discovering and updating +remote refs, transporting objects between the object database and +the remote repository, and updating the local object store. + +Helpers supporting the 'fetch' capability can discover refs from the +remote repository and transfer objects reachable from those refs to +the local object store. Helpers supporting the 'push' capability can +transfer local objects to the remote repository and update remote refs. + +Git comes with a "curl" family of remote helpers, that handle various +transport protocols, such as 'git-remote-http', 'git-remote-https', +'git-remote-ftp' and 'git-remote-ftps'. They implement the capabilities +'fetch', 'option', and 'push'. + +INVOCATION +---------- + +Remote helper programs are invoked with one or (optionally) two +arguments. The first argument specifies a remote repository as in git; +it is either the name of a configured remote or a URL. The second +argument specifies a URL; it is usually of the form +'<transport>://<address>', but any arbitrary string is possible. + +When git encounters a URL of the form '<transport>://<address>', where +'<transport>' is a protocol that it cannot handle natively, it +automatically invokes 'git remote-<transport>' with the full URL as +the second argument. If such a URL is encountered directly on the +command line, the first argument is the same as the second, and if it +is encountered in a configured remote, the first argument is the name +of that remote. + +A URL of the form '<transport>::<address>' explicitly instructs git to +invoke 'git remote-<transport>' with '<address>' as the second +argument. If such a URL is encountered directly on the command line, +the first argument is '<address>', and if it is encountered in a +configured remote, the first argument is the name of that remote. + +Additionally, when a configured remote has 'remote.<name>.vcs' set to +'<transport>', git explicitly invokes 'git remote-<transport>' with +'<name>' as the first argument. If set, the second argument is +'remote.<name>.url'; otherwise, the second argument is omitted. COMMANDS -------- @@ -25,8 +74,8 @@ Commands are given by the caller on the helper's standard input, one per line. 'capabilities':: Lists the capabilities of the helper, one per line, ending - with a blank line. Each capability may be preceded with '*'. - This marks them mandatory for git version using the remote + with a blank line. Each capability may be preceded with '*', + which marks them mandatory for git version using the remote helper to understand (unknown mandatory capability is fatal error). @@ -35,27 +84,27 @@ Commands are given by the caller on the helper's standard input, one per line. [<attr> ...]". The value may be a hex sha1 hash, "@<dest>" for a symref, or "?" to indicate that the helper could not get the value of the ref. A space-separated list of attributes follows - the name; unrecognized attributes are ignored. After the - complete list, outputs a blank line. + the name; unrecognized attributes are ignored. The list ends + with a blank line. + If 'push' is supported this may be called as 'list for-push' to obtain the current refs prior to sending one or more 'push' commands to the helper. 'option' <name> <value>:: - Set the transport helper option <name> to <value>. Outputs a + Sets the transport helper option <name> to <value>. Outputs a single line containing one of 'ok' (option successfully set), 'unsupported' (option not recognized) or 'error <msg>' - (option <name> is supported but <value> is not correct + (option <name> is supported but <value> is not valid for it). Options should be set before other commands, - and may how those commands behave. + and may influence the behavior of those commands. + Supported if the helper has the "option" capability. 'fetch' <sha1> <name>:: Fetches the given object, writing the necessary objects to the database. Fetch commands are sent in a batch, one - per line, and the batch is terminated with a blank line. + per line, terminated with a blank line. Outputs a single blank line when all fetch commands in the same batch are complete. Only objects which were reported in the ref list with a sha1 may be fetched this way. @@ -67,7 +116,7 @@ suitably updated. Supported if the helper has the "fetch" capability. 'push' +<src>:<dst>:: - Pushes the given <src> commit or branch locally to the + Pushes the given local <src> commit or branch to the remote branch described by <dst>. A batch sequence of one or more push commands is terminated with a blank line. + @@ -91,6 +140,9 @@ Supported if the helper has the "push" capability. by applying the refspecs from the "refspec" capability to the name of the ref. + +Especially useful for interoperability with a foreign versioning +system. ++ Supported if the helper has the "import" capability. 'connect' <service>:: @@ -119,16 +171,11 @@ CAPABILITIES ------------ 'fetch':: - This helper supports the 'fetch' command. - 'option':: - This helper supports the option command. - 'push':: - This helper supports the 'push' command. - 'import':: - This helper supports the 'import' command. +'connect':: + This helper supports the corresponding command with the same name. 'refspec' 'spec':: When using the import command, expect the source ref to have @@ -140,9 +187,6 @@ CAPABILITIES all, it must cover all refs reported by the list command; if it is not used, it is effectively "*:*" -'connect':: - This helper supports the 'connect' command. - REF LIST ATTRIBUTES ------------------- @@ -158,19 +202,19 @@ REF LIST ATTRIBUTES OPTIONS ------- 'option verbosity' <N>:: - Change the level of messages displayed by the helper. - When N is 0 the end-user has asked the process to be - quiet, and the helper should produce only error output. - N of 1 is the default level of verbosity, higher values + Changes the verbosity of messages displayed by the helper. + A value of 0 for N means that processes operate + quietly, and the helper produces only error output. + 1 is the default level of verbosity, and higher values of N correspond to the number of -v flags passed on the command line. 'option progress' \{'true'|'false'\}:: - Enable (or disable) progress messages displayed by the + Enables (or disables) progress messages displayed by the transport helper during a command. 'option depth' <depth>:: - Deepen the history of a shallow repository. + Deepens the history of a shallow repository. 'option followtags' \{'true'|'false'\}:: If enabled the helper should automatically fetch annotated @@ -186,11 +230,15 @@ OPTIONS helpers this only applies to the 'push', if supported. 'option servpath <c-style-quoted-path>':: - Set service path (--upload-pack, --receive-pack etc.) for - next connect. Remote helper MAY support this option. Remote - helper MUST NOT rely on this option being set before + Sets service path (--upload-pack, --receive-pack etc.) for + next connect. Remote helper may support this option, but + must not rely on this option being set before connect request occurs. +SEE ALSO +-------- +linkgit:git-remote[1] + Documentation ------------- Documentation by Daniel Barkalow and Ilari Liusvaara diff --git a/Documentation/git-remote.txt b/Documentation/git-remote.txt index 3fc599c0c7..aa021b0cb8 100644 --- a/Documentation/git-remote.txt +++ b/Documentation/git-remote.txt @@ -10,10 +10,11 @@ SYNOPSIS -------- [verse] 'git remote' [-v | --verbose] -'git remote add' [-t <branch>] [-m <master>] [-f] [--mirror] <name> <url> +'git remote add' [-t <branch>] [-m <master>] [-f] [--tags|--no-tags] [--mirror] <name> <url> 'git remote rename' <old> <new> 'git remote rm' <name> 'git remote set-head' <name> (-a | -d | <branch>) +'git remote set-branches' <name> [--add] <branch>... 'git remote set-url' [--push] <name> <newurl> [<oldurl>] 'git remote set-url --add' [--push] <name> <newurl> 'git remote set-url --delete' [--push] <name> <url> @@ -51,6 +52,12 @@ update remote-tracking branches <name>/<branch>. With `-f` option, `git fetch <name>` is run immediately after the remote information is set up. + +With `--tags` option, `git fetch <name>` imports every tag from the +remote repository. ++ +With `--no-tags` option, `git fetch <name>` does not import tags from +the remote repository. ++ With `-t <branch>` option, instead of the default glob refspec for the remote to track all branches under `$GIT_DIR/remotes/<name>/`, a refspec to track only `<branch>` @@ -104,6 +111,18 @@ remote set-head origin master" will set `$GIT_DIR/refs/remotes/origin/HEAD` to `refs/remotes/origin/master` already exists; if not it must be fetched first. + +'set-branches':: + +Changes the list of branches tracked by the named remote. +This can be used to track a subset of the available remote branches +after the initial setup for a remote. ++ +The named branches will be interpreted as if specified with the +`-t` option on the 'git remote add' command line. ++ +With `--add`, instead of replacing the list of currently tracked +branches, adds to that list. + 'set-url':: Changes URL remote points to. Sets first URL remote points to matching diff --git a/Documentation/git-rerere.txt b/Documentation/git-rerere.txt index acc220a00f..db99d4786e 100644 --- a/Documentation/git-rerere.txt +++ b/Documentation/git-rerere.txt @@ -7,7 +7,7 @@ git-rerere - Reuse recorded resolution of conflicted merges SYNOPSIS -------- -'git rerere' ['clear'|'diff'|'status'|'gc'] +'git rerere' ['clear'|'forget' [<pathspec>]|'diff'|'status'|'gc'] DESCRIPTION ----------- @@ -40,6 +40,11 @@ This resets the metadata used by rerere if a merge resolution is to be aborted. Calling 'git am [--skip|--abort]' or 'git rebase [--skip|--abort]' will automatically invoke this command. +'forget' <pathspec>:: + +This resets the conflict resolutions which rerere has recorded for the current +conflict in <pathspec>. The <pathspec> is optional. + 'diff':: This displays diffs for the current state of the resolution. It is diff --git a/Documentation/git-reset.txt b/Documentation/git-reset.txt index 168db08627..645f0c1748 100644 --- a/Documentation/git-reset.txt +++ b/Documentation/git-reset.txt @@ -8,7 +8,7 @@ git-reset - Reset current HEAD to the specified state SYNOPSIS -------- [verse] -'git reset' [--mixed | --soft | --hard | --merge] [-q] [<commit>] +'git reset' [--mixed | --soft | --hard | --merge | --keep] [-q] [<commit>] 'git reset' [-q] [<commit>] [--] <paths>... 'git reset' --patch [<commit>] [--] [<paths>...] @@ -52,6 +52,14 @@ OPTIONS and updates the files that are different between the named commit and the current commit in the working tree. +--keep:: + Reset the index to the given commit, keeping local changes in + the working tree since the current commit, while updating + working tree files without local changes to what appears in + the given commit. If a file that is different between the + current commit and the given commit has local changes, reset + is aborted. + -p:: --patch:: Interactively select hunks in the difference between the index @@ -93,6 +101,7 @@ in the index and in state D in HEAD. --mixed A D D --hard D D D --merge (disallowed) + --keep (disallowed) working index HEAD target working index HEAD ---------------------------------------------------- @@ -100,6 +109,7 @@ in the index and in state D in HEAD. --mixed A C C --hard C C C --merge (disallowed) + --keep A C C working index HEAD target working index HEAD ---------------------------------------------------- @@ -107,6 +117,7 @@ in the index and in state D in HEAD. --mixed B D D --hard D D D --merge D D D + --keep (disallowed) working index HEAD target working index HEAD ---------------------------------------------------- @@ -114,6 +125,7 @@ in the index and in state D in HEAD. --mixed B C C --hard C C C --merge C C C + --keep B C C working index HEAD target working index HEAD ---------------------------------------------------- @@ -121,6 +133,7 @@ in the index and in state D in HEAD. --mixed B D D --hard D D D --merge (disallowed) + --keep (disallowed) working index HEAD target working index HEAD ---------------------------------------------------- @@ -128,6 +141,7 @@ in the index and in state D in HEAD. --mixed B C C --hard C C C --merge B C C + --keep B C C "reset --merge" is meant to be used when resetting out of a conflicted merge. Any mergy operation guarantees that the work tree file that is @@ -138,6 +152,15 @@ between the index and the work tree, then it means that we are not resetting out from a state that a mergy operation left after failing with a conflict. That is why we disallow --merge option in this case. +"reset --keep" is meant to be used when removing some of the last +commits in the current branch while keeping changes in the working +tree. If there could be conflicts between the changes in the commit we +want to remove and the changes in the working tree we want to keep, +the reset is disallowed. That's why it is disallowed if there are both +changes between the working tree and HEAD, and between HEAD and the +target. To be safe, it is also disallowed when there are unmerged +entries. + The following tables show what happens when there are unmerged entries: @@ -147,6 +170,7 @@ entries: --mixed X B B --hard B B B --merge B B B + --keep (disallowed) working index HEAD target working index HEAD ---------------------------------------------------- @@ -154,6 +178,7 @@ entries: --mixed X A A --hard A A A --merge A A A + --keep (disallowed) X means any state and U means an unmerged index. @@ -325,6 +350,32 @@ $ git add frotz.c <3> <2> This commits all other changes in the index. <3> Adds the file to the index again. +Keep changes in working tree while discarding some previous commits:: ++ +Suppose you are working on something and you commit it, and then you +continue working a bit more, but now you think that what you have in +your working tree should be in another branch that has nothing to do +with what you commited previously. You can start a new branch and +reset it while keeping the changes in your work tree. ++ +------------ +$ git tag start +$ git checkout -b branch1 +$ edit +$ git commit ... <1> +$ edit +$ git checkout -b branch2 <2> +$ git reset --keep start <3> +------------ ++ +<1> This commits your first edits in branch1. +<2> In the ideal world, you could have realized that the earlier + commit did not belong to the new topic when you created and switched + to branch2 (i.e. "git checkout -b branch2 start"), but nobody is + perfect. +<3> But you can use "reset --keep" to remove the unwanted commit after + you switched to "branch2". + Author ------ Written by Junio C Hamano <gitster@pobox.com> and Linus Torvalds <torvalds@osdl.org> diff --git a/Documentation/git-rev-parse.txt b/Documentation/git-rev-parse.txt index 8db600f6ba..be4c053360 100644 --- a/Documentation/git-rev-parse.txt +++ b/Documentation/git-rev-parse.txt @@ -174,202 +174,7 @@ shown. If the pattern does not contain a globbing character (`?`, Flags and parameters to be parsed. -SPECIFYING REVISIONS --------------------- - -A revision parameter typically, but not necessarily, names a -commit object. They use what is called an 'extended SHA1' -syntax. Here are various ways to spell object names. The -ones listed near the end of this list are to name trees and -blobs contained in a commit. - -* The full SHA1 object name (40-byte hexadecimal string), or - a substring of such that is unique within the repository. - E.g. dae86e1950b1277e545cee180551750029cfe735 and dae86e both - name the same commit object if there are no other object in - your repository whose object name starts with dae86e. - -* An output from 'git describe'; i.e. a closest tag, optionally - followed by a dash and a number of commits, followed by a dash, a - `g`, and an abbreviated object name. - -* A symbolic ref name. E.g. 'master' typically means the commit - object referenced by refs/heads/master. If you - happen to have both heads/master and tags/master, you can - explicitly say 'heads/master' to tell git which one you mean. - When ambiguous, a `<name>` is disambiguated by taking the - first match in the following rules: - - . if `$GIT_DIR/<name>` exists, that is what you mean (this is usually - useful only for `HEAD`, `FETCH_HEAD`, `ORIG_HEAD` and `MERGE_HEAD`); - - . otherwise, `refs/<name>` if exists; - - . otherwise, `refs/tags/<name>` if exists; - - . otherwise, `refs/heads/<name>` if exists; - - . otherwise, `refs/remotes/<name>` if exists; - - . otherwise, `refs/remotes/<name>/HEAD` if exists. -+ -HEAD names the commit your changes in the working tree is based on. -FETCH_HEAD records the branch you fetched from a remote repository -with your last 'git fetch' invocation. -ORIG_HEAD is created by commands that moves your HEAD in a drastic -way, to record the position of the HEAD before their operation, so that -you can change the tip of the branch back to the state before you ran -them easily. -MERGE_HEAD records the commit(s) you are merging into your branch -when you run 'git merge'. -+ -Note that any of the `refs/*` cases above may come either from -the `$GIT_DIR/refs` directory or from the `$GIT_DIR/packed-refs` file. - -* A ref followed by the suffix '@' with a date specification - enclosed in a brace - pair (e.g. '\{yesterday\}', '\{1 month 2 weeks 3 days 1 hour 1 - second ago\}' or '\{1979-02-26 18:30:00\}') to specify the value - of the ref at a prior point in time. This suffix may only be - used immediately following a ref name and the ref must have an - existing log ($GIT_DIR/logs/<ref>). Note that this looks up the state - of your *local* ref at a given time; e.g., what was in your local - `master` branch last week. If you want to look at commits made during - certain times, see `--since` and `--until`. - -* A ref followed by the suffix '@' with an ordinal specification - enclosed in a brace pair (e.g. '\{1\}', '\{15\}') to specify - the n-th prior value of that ref. For example 'master@\{1\}' - is the immediate prior value of 'master' while 'master@\{5\}' - is the 5th prior value of 'master'. This suffix may only be used - immediately following a ref name and the ref must have an existing - log ($GIT_DIR/logs/<ref>). - -* You can use the '@' construct with an empty ref part to get at a - reflog of the current branch. For example, if you are on the - branch 'blabla', then '@\{1\}' means the same as 'blabla@\{1\}'. - -* The special construct '@\{-<n>\}' means the <n>th branch checked out - before the current one. - -* The suffix '@\{upstream\}' to a ref (short form 'ref@\{u\}') refers to - the branch the ref is set to build on top of. Missing ref defaults - to the current branch. - -* A suffix '{caret}' to a revision parameter means the first parent of - that commit object. '{caret}<n>' means the <n>th parent (i.e. - 'rev{caret}' - is equivalent to 'rev{caret}1'). As a special rule, - 'rev{caret}0' means the commit itself and is used when 'rev' is the - object name of a tag object that refers to a commit object. - -* A suffix '{tilde}<n>' to a revision parameter means the commit - object that is the <n>th generation grand-parent of the named - commit object, following only the first parent. I.e. rev~3 is - equivalent to rev{caret}{caret}{caret} which is equivalent to - rev{caret}1{caret}1{caret}1. See below for a illustration of - the usage of this form. - -* A suffix '{caret}' followed by an object type name enclosed in - brace pair (e.g. `v0.99.8{caret}\{commit\}`) means the object - could be a tag, and dereference the tag recursively until an - object of that type is found or the object cannot be - dereferenced anymore (in which case, barf). `rev{caret}0` - introduced earlier is a short-hand for `rev{caret}\{commit\}`. - -* A suffix '{caret}' followed by an empty brace pair - (e.g. `v0.99.8{caret}\{\}`) means the object could be a tag, - and dereference the tag recursively until a non-tag object is - found. - -* A colon, followed by a slash, followed by a text: this names - a commit whose commit message starts with the specified text. - This name returns the youngest matching commit which is - reachable from any ref. If the commit message starts with a - '!', you have to repeat that; the special sequence ':/!', - followed by something else than '!' is reserved for now. - -* A suffix ':' followed by a path; this names the blob or tree - at the given path in the tree-ish object named by the part - before the colon. - -* A colon, optionally followed by a stage number (0 to 3) and a - colon, followed by a path; this names a blob object in the - index at the given path. Missing stage number (and the colon - that follows it) names a stage 0 entry. During a merge, stage - 1 is the common ancestor, stage 2 is the target branch's version - (typically the current branch), and stage 3 is the version from - the branch being merged. - -Here is an illustration, by Jon Loeliger. Both commit nodes B -and C are parents of commit node A. Parent commits are ordered -left-to-right. - -........................................ -G H I J - \ / \ / - D E F - \ | / \ - \ | / | - \|/ | - B C - \ / - \ / - A -........................................ - - A = = A^0 - B = A^ = A^1 = A~1 - C = A^2 = A^2 - D = A^^ = A^1^1 = A~2 - E = B^2 = A^^2 - F = B^3 = A^^3 - G = A^^^ = A^1^1^1 = A~3 - H = D^2 = B^^2 = A^^^2 = A~2^2 - I = F^ = B^3^ = A^^3^ - J = F^2 = B^3^2 = A^^3^2 - - -SPECIFYING RANGES ------------------ - -History traversing commands such as 'git log' operate on a set -of commits, not just a single commit. To these commands, -specifying a single revision with the notation described in the -previous section means the set of commits reachable from that -commit, following the commit ancestry chain. - -To exclude commits reachable from a commit, a prefix `{caret}` -notation is used. E.g. `{caret}r1 r2` means commits reachable -from `r2` but exclude the ones reachable from `r1`. - -This set operation appears so often that there is a shorthand -for it. When you have two commits `r1` and `r2` (named according -to the syntax explained in SPECIFYING REVISIONS above), you can ask -for commits that are reachable from r2 excluding those that are reachable -from r1 by `{caret}r1 r2` and it can be written as `r1..r2`. - -A similar notation `r1\...r2` is called symmetric difference -of `r1` and `r2` and is defined as -`r1 r2 --not $(git merge-base --all r1 r2)`. -It is the set of commits that are reachable from either one of -`r1` or `r2` but not from both. - -Two other shorthands for naming a set that is formed by a commit -and its parent commits exist. The `r1{caret}@` notation means all -parents of `r1`. `r1{caret}!` includes commit `r1` but excludes -all of its parents. - -Here are a handful of examples: - - D G H D - D F G H I J D F - ^G D H D - ^D B E I J F B - B...C G H D E B C - ^D B C E I J F B C - C^@ I J F - F^! D G H D F +include::revisions.txt[] PARSEOPT -------- @@ -379,10 +184,13 @@ scripts the same facilities C builtins have. It works as an option normalizer (e.g. splits single switches aggregate values), a bit like `getopt(1)` does. It takes on the standard input the specification of the options to parse and -understand, and echoes on the standard output a line suitable for `sh(1)` `eval` +understand, and echoes on the standard output a string suitable for `sh(1)` `eval` to replace the arguments with normalized ones. In case of error, it outputs usage on the standard error stream, and exits with code 129. +Note: Make sure you quote the result when passing it to `eval`. See +below for an example. + Input Format ~~~~~~~~~~~~ @@ -439,7 +247,7 @@ bar= some cool option --bar with an argument An option group Header C? option C with an optional argument" -eval `echo "$OPTS_SPEC" | git rev-parse --parseopt -- "$@" || echo exit $?` +eval "$(echo "$OPTS_SPEC" | git rev-parse --parseopt -- "$@" || echo exit $?)" ------------ SQ-QUOTE diff --git a/Documentation/git-revert.txt b/Documentation/git-revert.txt index c66bf8072e..b7d9ef7e47 100644 --- a/Documentation/git-revert.txt +++ b/Documentation/git-revert.txt @@ -3,20 +3,22 @@ git-revert(1) NAME ---- -git-revert - Revert an existing commit +git-revert - Revert some existing commits SYNOPSIS -------- -'git revert' [--edit | --no-edit] [-n] [-m parent-number] [-s] <commit> +'git revert' [--edit | --no-edit] [-n] [-m parent-number] [-s] <commit>... DESCRIPTION ----------- -Given one existing commit, revert the change the patch introduces, and record a -new commit that records it. This requires your working tree to be clean (no -modifications from the HEAD commit). -Note: 'git revert' is used to record a new commit to reverse the -effect of an earlier commit (often a faulty one). If you want to +Given one or more existing commits, revert the changes that the +related patches introduce, and record some new commits that record +them. This requires your working tree to be clean (no modifications +from the HEAD commit). + +Note: 'git revert' is used to record some new commits to reverse the +effect of some earlier commits (often only a faulty one). If you want to throw away all uncommitted changes in your working directory, you should see linkgit:git-reset[1], particularly the '--hard' option. If you want to extract specific files as they were in another commit, you @@ -26,10 +28,13 @@ both will discard uncommitted changes in your working directory. OPTIONS ------- -<commit>:: - Commit to revert. +<commit>...:: + Commits to revert. For a more complete list of ways to spell commit names, see - "SPECIFYING REVISIONS" section in linkgit:git-rev-parse[1]. + linkgit:gitrevisions[1]. + Sets of commits can also be given but no traversal is done by + default, see linkgit:git-rev-list[1] and its '--no-walk' + option. -e:: --edit:: @@ -59,11 +64,11 @@ more details. -n:: --no-commit:: - Usually the command automatically creates a commit with - a commit log message stating which commit was - reverted. This flag applies the change necessary - to revert the named commit to your working tree - and the index, but does not make the commit. In addition, + Usually the command automatically creates some commits with + commit log messages stating which commits were + reverted. This flag applies the changes necessary + to revert the named commits to your working tree + and the index, but does not make the commits. In addition, when this option is used, your index does not have to match the HEAD commit. The revert is done against the beginning state of your index. @@ -75,6 +80,20 @@ effect to your index in a row. --signoff:: Add Signed-off-by line at the end of the commit message. +EXAMPLES +-------- +git revert HEAD~3:: + + Revert the changes specified by the fourth last commit in HEAD + and create a new commit with the reverted changes. + +git revert -n master\~5..master~2:: + + Revert the changes done by commits from the fifth last commit + in master (included) to the third last commit in master + (included), but do not create any commit with the reverted + changes. The revert only modifies the working tree and the + index. Author ------ @@ -84,6 +103,10 @@ Documentation -------------- Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. +SEE ALSO +-------- +linkgit:git-cherry-pick[1] + GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-send-email.txt b/Documentation/git-send-email.txt index ced35b2f53..c283084272 100644 --- a/Documentation/git-send-email.txt +++ b/Documentation/git-send-email.txt @@ -101,6 +101,15 @@ See the CONFIGURATION section for 'sendemail.multiedit'. + The --to option must be repeated for each user you want on the to list. +--8bit-encoding=<encoding>:: + When encountering a non-ASCII message or subject that does not + declare its encoding, add headers/quoting to indicate it is + encoded in <encoding>. Default is the value of the + 'sendemail.assume8bitEncoding'; if that is unspecified, this + will be prompted for if any non-ASCII files are encountered. ++ +Note that no attempts whatsoever are made to validate the encoding. + Sending ~~~~~~~ @@ -119,6 +128,13 @@ Sending value reverts to plain SMTP. Default is the value of 'sendemail.smtpencryption'. +--smtp-domain=<FQDN>:: + Specifies the Fully Qualified Domain Name (FQDN) used in the + HELO/EHLO command to the SMTP server. Some servers require the + FQDN to match your IP address. If not set, git send-email attempts + to determine your FQDN automatically. Default is the value of + 'sendemail.smtpdomain'. + --smtp-pass[=<password>]:: Password for SMTP-AUTH. The argument is optional: If no argument is specified, then the empty string is used as @@ -300,6 +316,21 @@ sendemail.confirm:: in the previous section for the meaning of these values. +Use gmail as the smtp server +---------------------------- + +Add the following section to the config file: + + [sendemail] + smtpencryption = tls + smtpserver = smtp.gmail.com + smtpuser = yourname@gmail.com + smtpserverport = 587 + +Note: the following perl modules are required + Net::SMTP::SSL, MIME::Base64 and Authen::SASL + + Author ------ Written by Ryan Anderson <ryan@michonline.com> diff --git a/Documentation/git-shortlog.txt b/Documentation/git-shortlog.txt index dfd4d0c223..bc1ac77495 100644 --- a/Documentation/git-shortlog.txt +++ b/Documentation/git-shortlog.txt @@ -9,7 +9,7 @@ SYNOPSIS -------- [verse] git log --pretty=short | 'git shortlog' [-h] [-n] [-s] [-e] [-w] -'git shortlog' [-n|--numbered] [-s|--summary] [-e|--email] [-w[<width>[,<indent1>[,<indent2>]]]] [<committish>...] +'git shortlog' [-n|--numbered] [-s|--summary] [-e|--email] [-w[<width>[,<indent1>[,<indent2>]]]] <commit>... DESCRIPTION ----------- @@ -19,6 +19,11 @@ the first line of the commit message will be shown. Additionally, "[PATCH]" will be stripped from the commit description. +If no revisions are passed on the command line and either standard input +is not a terminal or there is no current branch, 'git shortlog' will +output a summary of the log read from standard input, without +reference to the current repository. + OPTIONS ------- @@ -39,6 +44,14 @@ OPTIONS --email:: Show the email address of each author. +--format[='<format>']:: + Instead of the commit subject, use some other information to + describe each commit. '<format>' can be any string accepted + by the `--format` option of 'git log', such as '{asterisk} [%h] %s'. + (See the "PRETTY FORMATS" section of linkgit:git-log[1].) + + Each pretty-printed commit will be rewrapped before it is shown. + -w[<width>[,<indent1>[,<indent2>]]]:: Linewrap the output by wrapping each line at `width`. The first line of each entry is indented by `indent1` spaces, and the second diff --git a/Documentation/git-show-branch.txt b/Documentation/git-show-branch.txt index b9c4154e73..81ba29669c 100644 --- a/Documentation/git-show-branch.txt +++ b/Documentation/git-show-branch.txt @@ -9,7 +9,7 @@ SYNOPSIS -------- [verse] 'git show-branch' [-a|--all] [-r|--remotes] [--topo-order | --date-order] - [--current] [--color | --no-color] [--sparse] + [--current] [--color[=<when>] | --no-color] [--sparse] [--more=<n> | --list | --independent | --merge-base] [--no-name | --sha1-name] [--topics] [<rev> | <glob>]... @@ -32,7 +32,7 @@ no <rev> nor <glob> is given on the command line. OPTIONS ------- <rev>:: - Arbitrary extended SHA1 expression (see linkgit:git-rev-parse[1]) + Arbitrary extended SHA1 expression (see linkgit:gitrevisions[1]) that typically names a branch head or a tag. <glob>:: @@ -117,13 +117,15 @@ OPTIONS When no explicit <ref> parameter is given, it defaults to the current branch (or `HEAD` if it is detached). ---color:: +--color[=<when>]:: Color the status sign (one of these: `*` `!` `+` `-`) of each commit corresponding to the branch it's in. + The value must be always (the default), never, or auto. --no-color:: Turn off colored output, even when the configuration file gives the default to color output. + Same as `--color=never`. Note that --more, --list, --independent and --merge-base options are mutually exclusive. diff --git a/Documentation/git-show-ref.txt b/Documentation/git-show-ref.txt index 3f9d9c6db3..75780d7d63 100644 --- a/Documentation/git-show-ref.txt +++ b/Documentation/git-show-ref.txt @@ -163,9 +163,15 @@ flag, so you can do to get a listing of all tags together with what they dereference. +FILES +----- +`.git/refs/*`, `.git/packed-refs` + SEE ALSO -------- -linkgit:git-ls-remote[1] +linkgit:git-ls-remote[1], +linkgit:git-update-ref[1], +linkgit:gitrepository-layout[5] AUTHORS ------- diff --git a/Documentation/git-show.txt b/Documentation/git-show.txt index 55e687a7c7..0002bfb045 100644 --- a/Documentation/git-show.txt +++ b/Documentation/git-show.txt @@ -36,7 +36,7 @@ OPTIONS <object>...:: The names of objects to show. For a more complete list of ways to spell object names, see - "SPECIFYING REVISIONS" section in linkgit:git-rev-parse[1]. + "SPECIFYING REVISIONS" section in linkgit:gitrevisions[1]. include::pretty-options.txt[] diff --git a/Documentation/git-status.txt b/Documentation/git-status.txt index 2d4bbfcaf4..2fd054c104 100644 --- a/Documentation/git-status.txt +++ b/Documentation/git-status.txt @@ -27,6 +27,10 @@ OPTIONS --short:: Give the output in the short-format. +-b:: +--branch:: + Show the branch and tracking info even in short-format. + --porcelain:: Give the output in a stable, easy-to-parse format for scripts. Currently this is identical to --short output, but is guaranteed @@ -49,6 +53,17 @@ See linkgit:git-config[1] for configuration variable used to change the default for when the option is not specified. +--ignore-submodules[=<when>]:: + Ignore changes to submodules when looking for changes. <when> can be + either "untracked", "dirty" or "all", which is the default. When + "untracked" is used submodules are not considered dirty when they only + contain untracked content (but they are still scanned for modified + content). Using "dirty" ignores all changes to the work tree of submodules, + only changes to the commits stored in the superproject are shown (this was + the behavior before 1.7.0). Using "all" hides all changes to submodules + (and suppresses the output of submodule summaries when the config option + `status.submodulesummary` is set). + -z:: Terminate entries with NUL, instead of LF. This implies the `--porcelain` output format if no other format is given. @@ -120,6 +135,10 @@ Ignored files are not listed. ? ? untracked ------------------------------------------------- +If -b is used the short-format status is preceded by a line + +## branchname tracking info + There is an alternate -z format recommended for machine parsing. In that format, the status field is the same, but some other things change. First, the '->' is omitted from rename entries and the field @@ -128,7 +147,7 @@ order is reversed (e.g 'from -> to' becomes 'to from'). Second, a NUL and the terminating newline (but a space still separates the status field from the first filename). Third, filenames containing special characters are not specially formatted; no quoting or -backslash-escaping is performed. +backslash-escaping is performed. Fourth, there is no branch line. CONFIGURATION ------------- diff --git a/Documentation/git-submodule.txt b/Documentation/git-submodule.txt index 2502531a3d..1ed331c599 100644 --- a/Documentation/git-submodule.txt +++ b/Documentation/git-submodule.txt @@ -9,7 +9,7 @@ git-submodule - Initialize, update or inspect submodules SYNOPSIS -------- [verse] -'git submodule' [--quiet] add [-b branch] +'git submodule' [--quiet] add [-b branch] [-f|--force] [--reference <repository>] [--] <repository> [<path>] 'git submodule' [--quiet] status [--cached] [--recursive] [--] [<path>...] 'git submodule' [--quiet] init [--] [<path>...] @@ -145,10 +145,12 @@ summary:: foreach:: Evaluates an arbitrary shell command in each checked out submodule. - The command has access to the variables $name, $path and $sha1: + The command has access to the variables $name, $path, $sha1 and + $toplevel: $name is the name of the relevant submodule section in .gitmodules, $path is the name of the submodule directory relative to the - superproject, and $sha1 is the commit as recorded in the superproject. + superproject, $sha1 is the commit as recorded in the superproject, + and $toplevel is the absolute path to the top-level of the superproject. Any submodules defined in the superproject but not checked out are ignored by this command. Unless given --quiet, foreach prints the name of each submodule before evaluating the command. @@ -181,6 +183,11 @@ OPTIONS --branch:: Branch of repository to add as submodule. +-f:: +--force:: + This option is only valid for the add command. + Allow adding an otherwise ignored submodule path. + --cached:: This option is only valid for status and summary commands. These commands typically use the commit found in the submodule HEAD, but diff --git a/Documentation/git-svn.txt b/Documentation/git-svn.txt index 99f3c1ea6c..b09bd9761f 100644 --- a/Documentation/git-svn.txt +++ b/Documentation/git-svn.txt @@ -243,7 +243,7 @@ where <name> is the name of the SVN repository as specified by the -R option to --username;; Specify the SVN username to perform the commit as. This option overrides - configuration property 'username'. + the 'username' configuration property. --commit-url;; Use the specified URL to connect to the destination Subversion diff --git a/Documentation/git-update-index.txt b/Documentation/git-update-index.txt index 68dc1879fe..765d4b312e 100644 --- a/Documentation/git-update-index.txt +++ b/Documentation/git-update-index.txt @@ -93,8 +93,6 @@ OPTIONS This option can be also used as a coarse file-level mechanism to ignore uncommitted changes in tracked files (akin to what `.gitignore` does for untracked files). -You should remember that an explicit 'git add' operation will -still cause the file to be refreshed from the working tree. Git will fail (gracefully) in case it needs to modify this file in the index e.g. when merging in a commit; thus, in case the assumed-untracked file is changed upstream, diff --git a/Documentation/git.txt b/Documentation/git.txt index 46a215824e..c28a7ecc4d 100644 --- a/Documentation/git.txt +++ b/Documentation/git.txt @@ -12,6 +12,7 @@ SYNOPSIS 'git' [--version] [--exec-path[=GIT_EXEC_PATH]] [--html-path] [-p|--paginate|--no-pager] [--no-replace-objects] [--bare] [--git-dir=GIT_DIR] [--work-tree=GIT_WORK_TREE] + [-c name=value] [--help] COMMAND [ARGS] DESCRIPTION @@ -43,6 +44,19 @@ unreleased) version of git, that is available from 'master' branch of the `git.git` repository. Documentation for older releases are available here: +* link:v1.7.2.1/git.html[documentation for release 1.7.2.1] + +* release notes for + link:RelNotes-1.7.2.1.txt[1.7.2.1], + link:RelNotes-1.7.2.txt[1.7.2]. + +* link:v1.7.1.2/git.html[documentation for release 1.7.1.2] + +* release notes for + link:RelNotes-1.7.1.2.txt[1.7.1.2], + link:RelNotes-1.7.1.1.txt[1.7.1.1], + link:RelNotes-1.7.1.txt[1.7.1]. + * link:v1.7.0.7/git.html[documentation for release 1.7.0.7] * release notes for @@ -224,6 +238,12 @@ displayed. See linkgit:git-help[1] for more information, because `git --help ...` is converted internally into `git help ...`. +-c <name>=<value>:: + Pass a configuration parameter to the command. The value + given will override values from configuration files. + The <name> is expected in the same format as listed by + 'git config' (subkeys separated by dots). + --exec-path:: Path to wherever your core git programs are installed. This can also be controlled by setting the GIT_EXEC_PATH @@ -467,7 +487,7 @@ HEAD:: (i.e. the contents of `$GIT_DIR/refs/heads/<head>`). For a more complete list of ways to spell object names, see -"SPECIFYING REVISIONS" section in linkgit:git-rev-parse[1]. +"SPECIFYING REVISIONS" section in linkgit:gitrevisions[1]. File/Directory Structure @@ -534,6 +554,16 @@ git so take care if using Cogito etc. a GIT_DIR set on the command line or in the environment. (Useful for excluding slow-loading network directories.) +'GIT_DISCOVERY_ACROSS_FILESYSTEM':: + When run in a directory that does not have ".git" repository + directory, git tries to find such a directory in the parent + directories to find the top of the working tree, but by default it + does not cross filesystem boundaries. This environment variable + can be set to true to tell git not to stop at filesystem + boundaries. Like 'GIT_CEILING_DIRECTORIES', this will not affect + an explicit repository directory set via 'GIT_DIR' or on the + command line. + git Commits ~~~~~~~~~~~ 'GIT_AUTHOR_NAME':: @@ -697,6 +727,13 @@ The documentation for git suite was started by David Greaves <david@dgreaves.com>, and later enhanced greatly by the contributors on the git-list <git@vger.kernel.org>. +Reporting Bugs +-------------- + +Report bugs to the Git mailing list <git@vger.kernel.org> where the +development and maintenance is primarily done. You do not have to be +subscribed to the list to send a message there. + SEE ALSO -------- linkgit:gittutorial[7], linkgit:gittutorial-2[7], diff --git a/Documentation/gitattributes.txt b/Documentation/gitattributes.txt index d892e642ed..564586b943 100644 --- a/Documentation/gitattributes.txt +++ b/Documentation/gitattributes.txt @@ -92,53 +92,154 @@ such as 'git checkout' and 'git merge' run. They also affect how git stores the contents you prepare in the working tree in the repository upon 'git add' and 'git commit'. -`crlf` +`text` ^^^^^^ -This attribute controls the line-ending convention. +This attribute enables and controls end-of-line normalization. When a +text file is normalized, its line endings are converted to LF in the +repository. To control what line ending style is used in the working +directory, use the `eol` attribute for a single file and the +`core.eol` configuration variable for all text files. Set:: - Setting the `crlf` attribute on a path is meant to mark - the path as a "text" file. 'core.autocrlf' conversion - takes place without guessing the content type by - inspection. + Setting the `text` attribute on a path enables end-of-line + normalization and marks the path as a text file. End-of-line + conversion takes place without guessing the content type. Unset:: - Unsetting the `crlf` attribute on a path tells git not to + Unsetting the `text` attribute on a path tells git not to attempt any end-of-line conversion upon checkin or checkout. +Set to string value "auto":: + + When `text` is set to "auto", the path is marked for automatic + end-of-line normalization. If git decides that the content is + text, its line endings are normalized to LF on checkin. + Unspecified:: - Unspecified `crlf` attribute tells git to apply the - `core.autocrlf` conversion when the file content looks - like text. + If the `text` attribute is unspecified, git uses the + `core.autocrlf` configuration variable to determine if the + file should be converted. -Set to string value "input":: +Any other value causes git to act as if `text` has been left +unspecified. - This is similar to setting the attribute to `true`, but - also forces git to act as if `core.autocrlf` is set to - `input` for the path. +`eol` +^^^^^ -Any other value set to `crlf` attribute is ignored and git acts -as if the attribute is left unspecified. +This attribute sets a specific line-ending style to be used in the +working directory. It enables end-of-line normalization without any +content checks, effectively setting the `text` attribute. +Set to string value "crlf":: -The `core.autocrlf` conversion -^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + This setting forces git to normalize line endings for this + file on checkin and convert them to CRLF when the file is + checked out. + +Set to string value "lf":: + + This setting forces git to normalize line endings to LF on + checkin and prevents conversion to CRLF when the file is + checked out. + +Backwards compatibility with `crlf` attribute +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +For backwards compatibility, the `crlf` attribute is interpreted as +follows: + +------------------------ +crlf text +-crlf -text +crlf=input eol=lf +------------------------ + +End-of-line conversion +^^^^^^^^^^^^^^^^^^^^^^ + +While git normally leaves file contents alone, it can be configured to +normalize line endings to LF in the repository and, optionally, to +convert them to CRLF when files are checked out. + +Here is an example that will make git normalize .txt, .vcproj and .sh +files, ensure that .vcproj files have CRLF and .sh files have LF in +the working directory, and prevent .jpg files from being normalized +regardless of their content. + +------------------------ +*.txt text +*.vcproj eol=crlf +*.sh eol=lf +*.jpg -text +------------------------ + +Other source code management systems normalize all text files in their +repositories, and there are two ways to enable similar automatic +normalization in git. + +If you simply want to have CRLF line endings in your working directory +regardless of the repository you are working with, you can set the +config variable "core.autocrlf" without changing any attributes. -If the configuration variable `core.autocrlf` is false, no -conversion is done. +------------------------ +[core] + autocrlf = true +------------------------ + +This does not force normalization of all text files, but does ensure +that text files that you introduce to the repository have their line +endings normalized to LF when they are added, and that files that are +already normalized in the repository stay normalized. + +If you want to interoperate with a source code management system that +enforces end-of-line normalization, or you simply want all text files +in your repository to be normalized, you should instead set the `text` +attribute to "auto" for _all_ files. + +------------------------ +* text=auto +------------------------ + +This ensures that all files that git considers to be text will have +normalized (LF) line endings in the repository. The `core.eol` +configuration variable controls which line endings git will use for +normalized files in your working directory; the default is to use the +native line ending for your platform, or CRLF if `core.autocrlf` is +set. + +NOTE: When `text=auto` normalization is enabled in an existing +repository, any text files containing CRLFs should be normalized. If +they are not they will be normalized the next time someone tries to +change them, causing unfortunate misattribution. From a clean working +directory: + +------------------------------------------------- +$ echo "* text=auto" >>.gitattributes +$ rm .git/index # Remove the index to force git to +$ git reset # re-scan the working directory +$ git status # Show files that will be normalized +$ git add -u +$ git add .gitattributes +$ git commit -m "Introduce end-of-line normalization" +------------------------------------------------- + +If any files that should not be normalized show up in 'git status', +unset their `text` attribute before running 'git add -u'. -When `core.autocrlf` is true, it means that the platform wants -CRLF line endings for files in the working tree, and you want to -convert them back to the normal LF line endings when checking -in to the repository. +------------------------ +manual.pdf -text +------------------------ -When `core.autocrlf` is set to "input", line endings are -converted to LF upon checkin, but there is no conversion done -upon checkout. +Conversely, text files that git does not detect can have normalization +enabled manually. + +------------------------ +weirdchars.txt text +------------------------ If `core.safecrlf` is set to "true" or "warn", git verifies if the conversion is reversible for the current setting of @@ -223,11 +324,11 @@ Interaction between checkin/checkout attributes In the check-in codepath, the worktree file is first converted with `filter` driver (if specified and corresponding driver defined), then the result is processed with `ident` (if -specified), and then finally with `crlf` (again, if specified +specified), and then finally with `text` (again, if specified and applicable). In the check-out codepath, the blob content is first converted -with `crlf`, and then `ident` and fed to `filter`. +with `text`, and then `ident` and fed to `filter`. Generating diff text @@ -360,7 +461,7 @@ patterns are available: Customizing word diff ^^^^^^^^^^^^^^^^^^^^^ -You can customize the rules that `git diff --color-words` uses to +You can customize the rules that `git diff --word-diff` uses to split words in a line, by specifying an appropriate regular expression in the "diff.*.wordRegex" configuration variable. For example, in TeX a backslash followed by a sequence of letters forms a command, but @@ -414,6 +515,26 @@ because it quickly conveys the changes you have made), you should generate it separately and send it as a comment _in addition to_ the usual binary diff that you might send. +Because text conversion can be slow, especially when doing a +large number of them with `git log -p`, git provides a mechanism +to cache the output and use it in future diffs. To enable +caching, set the "cachetextconv" variable in your diff driver's +config. For example: + +------------------------ +[diff "jpg"] + textconv = exif + cachetextconv = true +------------------------ + +This will cache the result of running "exif" on each blob +indefinitely. If you change the textconv config variable for a +diff driver, git will automatically invalidate the cache entries +and re-run the textconv filter. If you want to invalidate the +cache manually (e.g., because your version of "exif" was updated +and now produces better output), you can remove the cache +manually with `git update-ref -d refs/notes/textconv/jpg` (where +"jpg" is the name of the diff driver, as in the example above). Performing a three-way merge ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ @@ -631,7 +752,7 @@ You do not want any end-of-line conversions applied to, nor textual diffs produced for, any binary file you track. You would need to specify e.g. ------------ -*.jpg -crlf -diff +*.jpg -text -diff ------------ but that may become cumbersome, when you have many attributes. Using @@ -644,7 +765,7 @@ the same time. The system knows a built-in attribute macro, `binary`: which is equivalent to the above. Note that the attribute macros can only be "Set" (see the above example that sets "binary" macro as if it were an -ordinary attribute --- setting it in turn unsets "crlf" and "diff"). +ordinary attribute --- setting it in turn unsets "text" and "diff"). DEFINING ATTRIBUTE MACROS @@ -655,7 +776,7 @@ at the toplevel (i.e. not in any subdirectory). The built-in attribute macro "binary" is equivalent to: ------------ -[attr]binary -diff -crlf +[attr]binary -diff -text ------------ diff --git a/Documentation/gitcore-tutorial.txt b/Documentation/gitcore-tutorial.txt index f7815e96a2..ed3ddc92cb 100644 --- a/Documentation/gitcore-tutorial.txt +++ b/Documentation/gitcore-tutorial.txt @@ -971,7 +971,7 @@ commits from the master branch. The string inside brackets before the commit log message is a short name you can use to name the commit. In the above example, 'master' and 'mybranch' are branch heads. 'master^' is the first parent of 'master' -branch head. Please see linkgit:git-rev-parse[1] if you want to +branch head. Please see linkgit:gitrevisions[1] if you want to see more complex cases. [NOTE] diff --git a/Documentation/gitdiffcore.txt b/Documentation/gitdiffcore.txt index 9de8caf5d1..5d91a7e5b3 100644 --- a/Documentation/gitdiffcore.txt +++ b/Documentation/gitdiffcore.txt @@ -227,8 +227,8 @@ changes that touch a specified string, and is controlled by the commands. When diffcore-pickaxe is in use, it checks if there are -filepairs whose "original" side has the specified string and -whose "result" side does not. Such a filepair represents "the +filepairs whose "result" side has the specified string and +whose "origin" side does not. Such a filepair represents "the string appeared in this changeset". It also checks for the opposite case that loses the specified string. diff --git a/Documentation/githooks.txt b/Documentation/githooks.txt index 87e2c035a7..7183aa9abb 100644 --- a/Documentation/githooks.txt +++ b/Documentation/githooks.txt @@ -317,6 +317,44 @@ This hook is invoked by 'git gc --auto'. It takes no parameter, and exiting with non-zero status from this script causes the 'git gc --auto' to abort. +post-rewrite +~~~~~~~~~~~~ + +This hook is invoked by commands that rewrite commits (`git commit +--amend`, 'git-rebase'; currently 'git-filter-branch' does 'not' call +it!). Its first argument denotes the command it was invoked by: +currently one of `amend` or `rebase`. Further command-dependent +arguments may be passed in the future. + +The hook receives a list of the rewritten commits on stdin, in the +format + + <old-sha1> SP <new-sha1> [ SP <extra-info> ] LF + +The 'extra-info' is again command-dependent. If it is empty, the +preceding SP is also omitted. Currently, no commands pass any +'extra-info'. + +The hook always runs after the automatic note copying (see +"notes.rewrite.<command>" in linkgit:git-config.txt) has happened, and +thus has access to these notes. + +The following command-specific comments apply: + +rebase:: + For the 'squash' and 'fixup' operation, all commits that were + squashed are listed as being rewritten to the squashed commit. + This means that there will be several lines sharing the same + 'new-sha1'. ++ +The commits are guaranteed to be listed in the order that they were +processed by rebase. + +There is no default 'post-rewrite' hook, but see the +`post-receive-copy-notes` script in `contrib/hooks` for an example +that copies your git-notes to the rewritten commits. + + GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/gitignore.txt b/Documentation/gitignore.txt index 98c459dc82..e10fa88b8c 100644 --- a/Documentation/gitignore.txt +++ b/Documentation/gitignore.txt @@ -83,16 +83,20 @@ Patterns have the following format: - If the pattern does not contain a slash '/', git treats it as a shell glob pattern and checks for a match against the - pathname without leading directories. + pathname relative to the location of the `.gitignore` file + (relative to the toplevel of the work tree if not from a + `.gitignore` file). - Otherwise, git treats the pattern as a shell glob suitable for consumption by fnmatch(3) with the FNM_PATHNAME flag: wildcards in the pattern will not match a / in the pathname. For example, "Documentation/\*.html" matches - "Documentation/git.html" but not - "Documentation/ppc/ppc.html". A leading slash matches the - beginning of the pathname; for example, "/*.c" matches - "cat-file.c" but not "mozilla-sha1/sha1.c". + "Documentation/git.html" but not "Documentation/ppc/ppc.html" + or "tools/perf/Documentation/perf.html". + + - A leading slash matches the beginning of the pathname. + For example, "/*.c" matches "cat-file.c" but not + "mozilla-sha1/sha1.c". An example: diff --git a/Documentation/gitk.txt b/Documentation/gitk.txt index 99baa24a2d..05ac1c79f7 100644 --- a/Documentation/gitk.txt +++ b/Documentation/gitk.txt @@ -69,7 +69,7 @@ frequently used options. the form "'<from>'..'<to>'" to show all revisions between '<from>' and back to '<to>'. Note, more advanced revision selection can be applied. For a more complete list of ways to spell object names, see - "SPECIFYING REVISIONS" section in linkgit:git-rev-parse[1]. + linkgit:gitrevisions[1]. <path>...:: diff --git a/Documentation/gitmodules.txt b/Documentation/gitmodules.txt index 5daf750d19..72a13d18e0 100644 --- a/Documentation/gitmodules.txt +++ b/Documentation/gitmodules.txt @@ -29,6 +29,9 @@ submodule.<name>.path:: submodule.<name>.url:: Defines an url from where the submodule repository can be cloned. + This may be either an absolute URL ready to be passed to + linkgit:git-clone[1] or (if it begins with ./ or ../) a location + relative to the superproject's origin repository. submodule.<name>.update:: Defines what to do when the submodule is updated by the superproject. diff --git a/Documentation/gitrevisions.txt b/Documentation/gitrevisions.txt new file mode 100644 index 0000000000..fc4789f98e --- /dev/null +++ b/Documentation/gitrevisions.txt @@ -0,0 +1,35 @@ +gitrevisions(7) +================ + +NAME +---- +gitrevisions - specifying revisions and ranges for git + +SYNOPSIS +-------- +gitrevisions + + +DESCRIPTION +----------- + +Many Git commands take revision parameters as arguments. Depending on +the command, they denote a specific commit or, for commands which +walk the revision graph (such as linkgit:git-log[1]), all commits which can +be reached from that commit. In the latter case one can also specify a +range of revisions explicitly. + +In addition, some Git commands (such as linkgit:git-show[1]) also take +revision parameters which denote other objects than commits, e.g. blobs +("files") or trees ("directories of files"). + +include::revisions.txt[] + + +SEE ALSO +-------- +linkgit:git-rev-parse[1] + +GIT +--- +Part of the linkgit:git[1] suite diff --git a/Documentation/howto/revert-a-faulty-merge.txt b/Documentation/howto/revert-a-faulty-merge.txt index 3b4a390005..ff5c0bc27a 100644 --- a/Documentation/howto/revert-a-faulty-merge.txt +++ b/Documentation/howto/revert-a-faulty-merge.txt @@ -142,6 +142,8 @@ different resolution strategies: revert of a merge was rebuilt from scratch (i.e. rebasing and fixing, as you seem to have interpreted), then re-merging the result without doing anything else fancy would be the right thing to do. + (See the ADDENDUM below for how to rebuild a branch from scratch + without changing its original branching-off point.) However, there are things to keep in mind when reverting a merge (and reverting such a revert). @@ -177,3 +179,91 @@ the answer is: "oops, I really shouldn't have merged it, because it wasn't ready yet, and I really need to undo _all_ of the merge"). So then you really should revert the merge, but when you want to re-do the merge, you now need to do it by reverting the revert. + +ADDENDUM + +Sometimes you have to rewrite one of a topic branch's commits *and* you can't +change the topic's branching-off point. Consider the following situation: + + P---o---o---M---x---x---W---x + \ / + A---B---C + +where commit W reverted commit M because it turned out that commit B was wrong +and needs to be rewritten, but you need the rewritten topic to still branch +from commit P (perhaps P is a branching-off point for yet another branch, and +you want be able to merge the topic into both branches). + +The natural thing to do in this case is to checkout the A-B-C branch and use +"rebase -i P" to change commit B. However this does not rewrite commit A, +because "rebase -i" by default fast-forwards over any initial commits selected +with the "pick" command. So you end up with this: + + P---o---o---M---x---x---W---x + \ / + A---B---C <-- old branch + \ + B'---C' <-- naively rewritten branch + +To merge A-B'-C' into the mainline branch you would still have to first revert +commit W in order to pick up the changes in A, but then it's likely that the +changes in B' will conflict with the original B changes re-introduced by the +reversion of W. + +However, you can avoid these problems if you recreate the entire branch, +including commit A: + + A'---B'---C' <-- completely rewritten branch + / + P---o---o---M---x---x---W---x + \ / + A---B---C + +You can merge A'-B'-C' into the mainline branch without worrying about first +reverting W. Mainline's history would look like this: + + A'---B'---C'------------------ + / \ + P---o---o---M---x---x---W---x---M2 + \ / + A---B---C + +But if you don't actually need to change commit A, then you need some way to +recreate it as a new commit with the same changes in it. The rebase commmand's +--no-ff option provides a way to do this: + + $ git rebase [-i] --no-ff P + +The --no-ff option creates a new branch A'-B'-C' with all-new commits (all the +SHA IDs will be different) even if in the interactive case you only actually +modify commit B. You can then merge this new branch directly into the mainline +branch and be sure you'll get all of the branch's changes. + +You can also use --no-ff in cases where you just add extra commits to the topic +to fix it up. Let's revisit the situation discussed at the start of this howto: + + P---o---o---M---x---x---W---x + \ / + A---B---C----------------D---E <-- fixed-up topic branch + +At this point, you can use --no-ff to recreate the topic branch: + + $ git checkout E + $ git rebase --no-ff P + +yielding + + A'---B'---C'------------D'---E' <-- recreated topic branch + / + P---o---o---M---x---x---W---x + \ / + A---B---C----------------D---E + +You can merge the recreated branch into the mainline without reverting commit W, +and mainline's history will look like this: + + A'---B'---C'------------D'---E' + / \ + P---o---o---M---x---x---W---x---M2 + \ / + A---B---C diff --git a/Documentation/install-webdoc.sh b/Documentation/install-webdoc.sh index 2135a8ee1f..34d02a2418 100755 --- a/Documentation/install-webdoc.sh +++ b/Documentation/install-webdoc.sh @@ -12,7 +12,7 @@ do then : did not match elif test -f "$T/$h" && - diff -u -I'Last updated [0-9][0-9]-[A-Z][a-z][a-z]-' "$T/$h" "$h" + $DIFF -u -I'Last updated [0-9][0-9]-[A-Z][a-z][a-z]-' "$T/$h" "$h" then :; # up to date else diff --git a/Documentation/merge-options.txt b/Documentation/merge-options.txt index 81ac823964..722d704ff2 100644 --- a/Documentation/merge-options.txt +++ b/Documentation/merge-options.txt @@ -72,6 +72,7 @@ option can be used to override --squash. Synonyms to --stat and --no-stat; these are deprecated and will be removed in the future. +ifndef::git-pull[] -q:: --quiet:: Operate quietly. @@ -79,3 +80,4 @@ option can be used to override --squash. -v:: --verbose:: Be verbose. +endif::git-pull[] diff --git a/Documentation/pretty-formats.txt b/Documentation/pretty-formats.txt index 1686a54d22..561cc9f7d7 100644 --- a/Documentation/pretty-formats.txt +++ b/Documentation/pretty-formats.txt @@ -11,7 +11,12 @@ have limited your view of history: for example, if you are only interested in changes related to a certain directory or file. -Here are some additional details for each format: +There are several built-in formats, and you can define +additional formats by setting a pretty.<name> +config option to either another format name, or a +'format:' string, as described below (see +linkgit:git-config[1]). Here are the details of the +built-in formats: * 'oneline' @@ -76,9 +81,9 @@ displayed in full, regardless of whether --abbrev or true parent commits, without taking grafts nor history simplification into account. -* 'format:' +* 'format:<string>' + -The 'format:' format allows you to specify which information +The 'format:<string>' format allows you to specify which information you want to show. It works a little bit like printf format, with the notable exception that you get a newline with '%n' instead of '\n'. @@ -123,6 +128,7 @@ The placeholders are: - '%s': subject - '%f': sanitized subject line, suitable for a filename - '%b': body +- '%B': raw body (unwrapped subject and body) - '%N': commit notes - '%gD': reflog selector, e.g., `refs/stash@\{1\}` - '%gd': shortened reflog selector, e.g., `stash@\{1\}` @@ -153,6 +159,10 @@ If you add a `-` (minus sign) after '%' of a placeholder, line-feeds that immediately precede the expansion are deleted if and only if the placeholder expands to an empty string. +If you add a ` ` (space) after '%' of a placeholder, a space +is inserted immediately before the expansion if and only if the +placeholder expands to a non-empty string. + * 'tformat:' + The 'tformat:' format works exactly like 'format:', except that it diff --git a/Documentation/pretty-options.txt b/Documentation/pretty-options.txt index aa96caeab2..9b6f3899ec 100644 --- a/Documentation/pretty-options.txt +++ b/Documentation/pretty-options.txt @@ -1,10 +1,11 @@ --pretty[='<format>']:: ---format[='<format>']:: +--format='<format>':: Pretty-print the contents of the commit logs in a given format, where '<format>' can be one of 'oneline', 'short', 'medium', - 'full', 'fuller', 'email', 'raw' and 'format:<string>'. - When omitted, the format defaults to 'medium'. + 'full', 'fuller', 'email', 'raw' and 'format:<string>'. See + the "PRETTY FORMATS" section for some additional details for each + format. When omitted, the format defaults to 'medium'. + Note: you can specify the default pretty format in the repository configuration (see linkgit:git-config[1]). @@ -30,9 +31,18 @@ people using 80-column terminals. defaults to UTF-8. --no-notes:: ---show-notes:: +--show-notes[=<ref>]:: Show the notes (see linkgit:git-notes[1]) that annotate the commit, when showing the commit log message. This is the default for `git log`, `git show` and `git whatchanged` commands when there is no `--pretty`, `--format` nor `--oneline` option is given on the command line. ++ +With an optional argument, add this ref to the list of notes. The ref +is taken to be in `refs/notes/` if it is not qualified. + +--[no-]standard-notes:: + Enable or disable populating the notes ref list from the + 'core.notesRef' and 'notes.displayRef' variables (or + corresponding environment overrides). Enabled by default. + See linkgit:git-config[1]. diff --git a/Documentation/rev-list-options.txt b/Documentation/rev-list-options.txt index 81c0e6f184..cc562a057a 100644 --- a/Documentation/rev-list-options.txt +++ b/Documentation/rev-list-options.txt @@ -98,6 +98,15 @@ you would get an output like this: This implies the '--topo-order' option by default, but the '--date-order' option may also be specified. +ifdef::git-rev-list[] +--count:: + Print a number stating how many commits would have been + listed, and suppress all other output. When used together + with '--left-right', instead print the counts for left and + right commits, separated by a tab. +endif::git-rev-list[] + + ifndef::git-rev-list[] Diff Formatting ~~~~~~~~~~~~~~~ @@ -108,8 +117,8 @@ options may be given. See linkgit:git-diff-files[1] for more options. -c:: - This flag changes the way a merge commit is displayed. It shows - the differences from each of the parents to the merge result + With this option, diff output for a merge commit + shows the differences from each of the parents to the merge result simultaneously instead of showing pairwise diff between a parent and the result one at a time. Furthermore, it lists only files which were modified from all parents. @@ -121,6 +130,15 @@ options may be given. See linkgit:git-diff-files[1] for more options. the parents have only two variants and the merge result picks one of them without modification. +-m:: + + This flag makes the merge commits show the full diff like + regular commits; for each merge parent, a separate log entry + and diff is generated. An exception is that only diff against + the first parent is shown when '--first-parent' option is given; + in that case, the output represents the changes the merge + brought _into_ the then-current branch. + -r:: Show recursive diffs. @@ -375,6 +393,14 @@ Default mode:: merges from the resulting history, as there are no selected commits contributing to this merge. +--ancestry-path:: + + When given a range of commits to display (e.g. 'commit1..commit2' + or 'commit2 {caret}commit1'), only display commits that exist + directly on the ancestry chain between the 'commit1' and + 'commit2', i.e. commits that are both descendants of 'commit1', + and ancestors of 'commit2'. + A more detailed explanation follows. Suppose you specified `foo` as the <paths>. We shall call commits @@ -431,7 +457,7 @@ This results in: + ----------------------------------------------------------------------- .-A---N---O - / / + / / / I---------D ----------------------------------------------------------------------- + @@ -502,8 +528,6 @@ Note that without '\--full-history', this still simplifies merges: if one of the parents is TREESAME, we follow only that one, so the other sides of the merge are never walked. -Finally, there is a fourth simplification mode available: - --simplify-merges:: First, build a history graph in the same way that @@ -545,6 +569,46 @@ Note the major differences in `N` and `P` over '\--full-history': removed completely, because it had one parent and is TREESAME. -- +Finally, there is a fifth simplification mode available: + +--ancestry-path:: + + Limit the displayed commits to those directly on the ancestry + chain between the "from" and "to" commits in the given commit + range. I.e. only display commits that are ancestor of the "to" + commit, and descendants of the "from" commit. ++ +As an example use case, consider the following commit history: ++ +----------------------------------------------------------------------- + D---E-------F + / \ \ + B---C---G---H---I---J + / \ + A-------K---------------L--M +----------------------------------------------------------------------- ++ +A regular 'D..M' computes the set of commits that are ancestors of `M`, +but excludes the ones that are ancestors of `D`. This is useful to see +what happened to the history leading to `M` since `D`, in the sense +that "what does `M` have that did not exist in `D`". The result in this +example would be all the commits, except `A` and `B` (and `D` itself, +of course). ++ +When we want to find out what commits in `M` are contaminated with the +bug introduced by `D` and need fixing, however, we might want to view +only the subset of 'D..M' that are actually descendants of `D`, i.e. +excluding `C` and `K`. This is exactly what the '\--ancestry-path' +option does. Applied to the 'D..M' range, it results in: ++ +----------------------------------------------------------------------- + E-------F + \ \ + G---H---I---J + \ + L--M +----------------------------------------------------------------------- + The '\--simplify-by-decoration' option allows you to view only the big picture of the topology of the history, by omitting commits that are not referenced by tags. Commits are marked as !TREESAME diff --git a/Documentation/revisions.txt b/Documentation/revisions.txt new file mode 100644 index 0000000000..fe846f043c --- /dev/null +++ b/Documentation/revisions.txt @@ -0,0 +1,199 @@ +SPECIFYING REVISIONS +-------------------- + +A revision parameter typically, but not necessarily, names a +commit object. They use what is called an 'extended SHA1' +syntax. Here are various ways to spell object names. The +ones listed near the end of this list are to name trees and +blobs contained in a commit. + +* The full SHA1 object name (40-byte hexadecimal string), or + a substring of such that is unique within the repository. + E.g. dae86e1950b1277e545cee180551750029cfe735 and dae86e both + name the same commit object if there are no other object in + your repository whose object name starts with dae86e. + +* An output from 'git describe'; i.e. a closest tag, optionally + followed by a dash and a number of commits, followed by a dash, a + `g`, and an abbreviated object name. + +* A symbolic ref name. E.g. 'master' typically means the commit + object referenced by refs/heads/master. If you + happen to have both heads/master and tags/master, you can + explicitly say 'heads/master' to tell git which one you mean. + When ambiguous, a `<name>` is disambiguated by taking the + first match in the following rules: + + . if `$GIT_DIR/<name>` exists, that is what you mean (this is usually + useful only for `HEAD`, `FETCH_HEAD`, `ORIG_HEAD` and `MERGE_HEAD`); + + . otherwise, `refs/<name>` if exists; + + . otherwise, `refs/tags/<name>` if exists; + + . otherwise, `refs/heads/<name>` if exists; + + . otherwise, `refs/remotes/<name>` if exists; + + . otherwise, `refs/remotes/<name>/HEAD` if exists. ++ +HEAD names the commit your changes in the working tree is based on. +FETCH_HEAD records the branch you fetched from a remote repository +with your last 'git fetch' invocation. +ORIG_HEAD is created by commands that moves your HEAD in a drastic +way, to record the position of the HEAD before their operation, so that +you can change the tip of the branch back to the state before you ran +them easily. +MERGE_HEAD records the commit(s) you are merging into your branch +when you run 'git merge'. ++ +Note that any of the `refs/*` cases above may come either from +the `$GIT_DIR/refs` directory or from the `$GIT_DIR/packed-refs` file. + +* A ref followed by the suffix '@' with a date specification + enclosed in a brace + pair (e.g. '\{yesterday\}', '\{1 month 2 weeks 3 days 1 hour 1 + second ago\}' or '\{1979-02-26 18:30:00\}') to specify the value + of the ref at a prior point in time. This suffix may only be + used immediately following a ref name and the ref must have an + existing log ($GIT_DIR/logs/<ref>). Note that this looks up the state + of your *local* ref at a given time; e.g., what was in your local + `master` branch last week. If you want to look at commits made during + certain times, see `--since` and `--until`. + +* A ref followed by the suffix '@' with an ordinal specification + enclosed in a brace pair (e.g. '\{1\}', '\{15\}') to specify + the n-th prior value of that ref. For example 'master@\{1\}' + is the immediate prior value of 'master' while 'master@\{5\}' + is the 5th prior value of 'master'. This suffix may only be used + immediately following a ref name and the ref must have an existing + log ($GIT_DIR/logs/<ref>). + +* You can use the '@' construct with an empty ref part to get at a + reflog of the current branch. For example, if you are on the + branch 'blabla', then '@\{1\}' means the same as 'blabla@\{1\}'. + +* The special construct '@\{-<n>\}' means the <n>th branch checked out + before the current one. + +* The suffix '@\{upstream\}' to a ref (short form 'ref@\{u\}') refers to + the branch the ref is set to build on top of. Missing ref defaults + to the current branch. + +* A suffix '{caret}' to a revision parameter (e.g. 'HEAD{caret}') means the first parent of + that commit object. '{caret}<n>' means the <n>th parent (i.e. + 'rev{caret}' + is equivalent to 'rev{caret}1'). As a special rule, + 'rev{caret}0' means the commit itself and is used when 'rev' is the + object name of a tag object that refers to a commit object. + +* A suffix '{tilde}<n>' to a revision parameter means the commit + object that is the <n>th generation grand-parent of the named + commit object, following only the first parent. I.e. rev~3 is + equivalent to rev{caret}{caret}{caret} which is equivalent to + rev{caret}1{caret}1{caret}1. See below for a illustration of + the usage of this form. + +* A suffix '{caret}' followed by an object type name enclosed in + brace pair (e.g. `v0.99.8{caret}\{commit\}`) means the object + could be a tag, and dereference the tag recursively until an + object of that type is found or the object cannot be + dereferenced anymore (in which case, barf). `rev{caret}0` + introduced earlier is a short-hand for `rev{caret}\{commit\}`. + +* A suffix '{caret}' followed by an empty brace pair + (e.g. `v0.99.8{caret}\{\}`) means the object could be a tag, + and dereference the tag recursively until a non-tag object is + found. + +* A colon, followed by a slash, followed by a text (e.g. `:/fix nasty bug`): this names + a commit whose commit message starts with the specified text. + This name returns the youngest matching commit which is + reachable from any ref. If the commit message starts with a + '!', you have to repeat that; the special sequence ':/!', + followed by something else than '!' is reserved for now. + +* A suffix ':' followed by a path (e.g. `HEAD:README`); this names the blob or tree + at the given path in the tree-ish object named by the part + before the colon. + ':path' (with an empty part before the colon, e.g. `:README`) + is a special case of the syntax described next: content + recorded in the index at the given path. + +* A colon, optionally followed by a stage number (0 to 3) and a + colon, followed by a path (e.g. `:0:README`); this names a blob object in the + index at the given path. Missing stage number (and the colon + that follows it, e.g. `:README`) names a stage 0 entry. During a merge, stage + 1 is the common ancestor, stage 2 is the target branch's version + (typically the current branch), and stage 3 is the version from + the branch being merged. + +Here is an illustration, by Jon Loeliger. Both commit nodes B +and C are parents of commit node A. Parent commits are ordered +left-to-right. + +........................................ +G H I J + \ / \ / + D E F + \ | / \ + \ | / | + \|/ | + B C + \ / + \ / + A +........................................ + + A = = A^0 + B = A^ = A^1 = A~1 + C = A^2 = A^2 + D = A^^ = A^1^1 = A~2 + E = B^2 = A^^2 + F = B^3 = A^^3 + G = A^^^ = A^1^1^1 = A~3 + H = D^2 = B^^2 = A^^^2 = A~2^2 + I = F^ = B^3^ = A^^3^ + J = F^2 = B^3^2 = A^^3^2 + + +SPECIFYING RANGES +----------------- + +History traversing commands such as 'git log' operate on a set +of commits, not just a single commit. To these commands, +specifying a single revision with the notation described in the +previous section means the set of commits reachable from that +commit, following the commit ancestry chain. + +To exclude commits reachable from a commit, a prefix `{caret}` +notation is used. E.g. `{caret}r1 r2` means commits reachable +from `r2` but exclude the ones reachable from `r1`. + +This set operation appears so often that there is a shorthand +for it. When you have two commits `r1` and `r2` (named according +to the syntax explained in SPECIFYING REVISIONS above), you can ask +for commits that are reachable from r2 excluding those that are reachable +from r1 by `{caret}r1 r2` and it can be written as `r1..r2`. + +A similar notation `r1\...r2` is called symmetric difference +of `r1` and `r2` and is defined as +`r1 r2 --not $(git merge-base --all r1 r2)`. +It is the set of commits that are reachable from either one of +`r1` or `r2` but not from both. + +Two other shorthands for naming a set that is formed by a commit +and its parent commits exist. The `r1{caret}@` notation means all +parents of `r1`. `r1{caret}!` includes commit `r1` but excludes +all of its parents. + +Here are a handful of examples: + + D G H D + D F G H I J D F + ^G D H D + ^D B E I J F B + B...C G H D E B C + ^D B C E I J F B C + C^@ I J F + F^! D G H D F diff --git a/Documentation/technical/api-parse-options.txt b/Documentation/technical/api-parse-options.txt index 50f9e9ac17..312e3b2e2b 100644 --- a/Documentation/technical/api-parse-options.txt +++ b/Documentation/technical/api-parse-options.txt @@ -115,6 +115,9 @@ There are some macros to easily define options: `OPT__ABBREV(&int_var)`:: Add `\--abbrev[=<n>]`. +`OPT__COLOR(&int_var, description)`:: + Add `\--color[=<when>]` and `--no-color`. + `OPT__DRY_RUN(&int_var)`:: Add `-n, \--dry-run`. @@ -183,6 +186,15 @@ There are some macros to easily define options: arguments. Short options that happen to be digits take precedence over it. +`OPT_COLOR_FLAG(short, long, &int_var, description)`:: + Introduce an option that takes an optional argument that can + have one of three values: "always", "never", or "auto". If the + argument is not given, it defaults to "always". The `--no-` form + works like `--long=never`; it cannot take an argument. If + "always", set `int_var` to 1; if "never", set `int_var` to 0; if + "auto", set `int_var` to 1 if stdout is a tty or a pager, + 0 otherwise. + The last element of the array must be `OPT_END()`. diff --git a/Documentation/technical/api-run-command.txt b/Documentation/technical/api-run-command.txt index 44876fa703..f18b4f4817 100644 --- a/Documentation/technical/api-run-command.txt +++ b/Documentation/technical/api-run-command.txt @@ -231,8 +231,9 @@ The function pointer in .proc has the following signature: There are serious restrictions on what the asynchronous function can do -because this facility is implemented by a pipe to a forked process on -UNIX, but by a thread in the same address space on Windows: +because this facility is implemented by a thread in the same address +space on most platforms (when pthreads is available), but by a pipe to +a forked process otherwise: . It cannot change the program's state (global variables, environment, etc.) in a way that the caller notices; in other words, .in and .out diff --git a/Documentation/technical/api-string-list.txt b/Documentation/technical/api-string-list.txt index 293bb15d20..3f575bdcff 100644 --- a/Documentation/technical/api-string-list.txt +++ b/Documentation/technical/api-string-list.txt @@ -38,8 +38,8 @@ struct string_list list; int i; memset(&list, 0, sizeof(struct string_list)); -string_list_append("foo", &list); -string_list_append("bar", &list); +string_list_append(&list, "foo"); +string_list_append(&list, "bar"); for (i = 0; i < list.nr; i++) printf("%s\n", list.items[i].string) ---- @@ -104,8 +104,12 @@ write `string_list_insert(...)->util = ...;`. `unsorted_string_list_has_string`:: It's like `string_list_has_string()` but for unsorted lists. + +`unsorted_string_list_lookup`:: + + It's like `string_list_lookup()` but for unsorted lists. + -This function needs to look through all items, as opposed to its +The above two functions need to look through all items, as opposed to their counterpart for sorted lists, which performs a binary search. Data structures diff --git a/Documentation/technical/protocol-capabilities.txt b/Documentation/technical/protocol-capabilities.txt index fd1a593149..b15517fa06 100644 --- a/Documentation/technical/protocol-capabilities.txt +++ b/Documentation/technical/protocol-capabilities.txt @@ -119,7 +119,7 @@ both. ofs-delta --------- -Server can send, and client understand PACKv2 with delta refering to +Server can send, and client understand PACKv2 with delta referring to its base by position in pack rather than by an obj-id. That is, they can send/read OBJ_OFS_DELTA (aka type 6) in a packfile. diff --git a/Documentation/urls.txt b/Documentation/urls.txt index 459a394dc0..1dcd1e7f1e 100644 --- a/Documentation/urls.txt +++ b/Documentation/urls.txt @@ -1,44 +1,57 @@ GIT URLS[[URLS]] ---------------- -One of the following notations can be used -to name the remote repository: +In general, URLs contain information about the transport protocol, the +address of the remote server, and the path to the repository. +Depending on the transport protocol, some of this information may be +absent. + +Git natively supports ssh, git, http, https, ftp, ftps, and rsync +protocols. The following syntaxes may be used with them: -- rsync://host.xz/path/to/repo.git/ -- http://host.xz{startsb}:port{endsb}/path/to/repo.git/ -- https://host.xz{startsb}:port{endsb}/path/to/repo.git/ -- git://host.xz{startsb}:port{endsb}/path/to/repo.git/ -- git://host.xz{startsb}:port{endsb}/~user/path/to/repo.git/ - ssh://{startsb}user@{endsb}host.xz{startsb}:port{endsb}/path/to/repo.git/ -- ssh://{startsb}user@{endsb}host.xz/path/to/repo.git/ -- ssh://{startsb}user@{endsb}host.xz/~user/path/to/repo.git/ -- ssh://{startsb}user@{endsb}host.xz/~/path/to/repo.git +- git://host.xz{startsb}:port{endsb}/path/to/repo.git/ +- http{startsb}s{endsb}://host.xz{startsb}:port{endsb}/path/to/repo.git/ +- ftp{startsb}s{endsb}://host.xz{startsb}:port{endsb}/path/to/repo.git/ +- rsync://host.xz/path/to/repo.git/ -SSH is the default transport protocol over the network. You can -optionally specify which user to log-in as, and an alternate, -scp-like syntax is also supported. Both syntaxes support -username expansion, as does the native git protocol, but -only the former supports port specification. The following -three are identical to the last three above, respectively: +An alternative scp-like syntax may also be used with the ssh protocol: -- {startsb}user@{endsb}host.xz:/path/to/repo.git/ -- {startsb}user@{endsb}host.xz:~user/path/to/repo.git/ -- {startsb}user@{endsb}host.xz:path/to/repo.git +- {startsb}user@{endsb}host.xz:path/to/repo.git/ -To sync with a local directory, you can use: +The ssh and git protocols additionally support ~username expansion: + +- ssh://{startsb}user@{endsb}host.xz{startsb}:port{endsb}/~{startsb}user{endsb}/path/to/repo.git/ +- git://host.xz{startsb}:port{endsb}/~{startsb}user{endsb}/path/to/repo.git/ +- {startsb}user@{endsb}host.xz:/~{startsb}user{endsb}/path/to/repo.git/ + +For local respositories, also supported by git natively, the following +syntaxes may be used: - /path/to/repo.git/ - file:///path/to/repo.git/ ifndef::git-clone[] -They are mostly equivalent, except when cloning. See -linkgit:git-clone[1] for details. +These two syntaxes are mostly equivalent, except when cloning, when +the former implies --local option. See linkgit:git-clone[1] for +details. endif::git-clone[] ifdef::git-clone[] -They are equivalent, except the former implies --local option. +These two syntaxes are mostly equivalent, except the former implies +--local option. endif::git-clone[] +When git doesn't know how to handle a certain transport protocol, it +attempts to use the 'remote-<transport>' remote helper, if one +exists. To explicitly request a remote helper, the following syntax +may be used: + +- <transport>::<address> + +where <address> may be a path, a server and path, or an arbitrary +URL-like string recognized by the specific remote helper being +invoked. See linkgit:git-remote-helpers[1] for details. If there are a large number of similarly-named remote repositories and you want to use a different format for them (such that the URLs you diff --git a/Documentation/user-manual.txt b/Documentation/user-manual.txt index fe6fb722da..22aee34d4a 100644 --- a/Documentation/user-manual.txt +++ b/Documentation/user-manual.txt @@ -397,7 +397,7 @@ is usually a shortcut for the HEAD branch in the repository "origin". For the complete list of paths which git checks for references, and the order it uses to decide which to choose when there are multiple references with the same shorthand name, see the "SPECIFYING -REVISIONS" section of linkgit:git-rev-parse[1]. +REVISIONS" section of linkgit:gitrevisions[1]. [[Updating-a-repository-With-git-fetch]] Updating a repository with git fetch @@ -568,7 +568,7 @@ We have seen several ways of naming commits already: - HEAD: refers to the head of the current branch There are many more; see the "SPECIFYING REVISIONS" section of the -linkgit:git-rev-parse[1] man page for the complete list of ways to +linkgit:gitrevisions[1] man page for the complete list of ways to name revisions. Some examples: ------------------------------------------------- @@ -909,7 +909,7 @@ commits reachable from some head but not from any tag in the repository: $ gitk $( git show-ref --heads ) --not $( git show-ref --tags ) ------------------------------------------------- -(See linkgit:git-rev-parse[1] for explanations of commit-selecting +(See linkgit:gitrevisions[1] for explanations of commit-selecting syntax such as `--not`.) [[making-a-release]] @@ -1635,7 +1635,7 @@ you've checked out. The reflogs are kept by default for 30 days, after which they may be pruned. See linkgit:git-reflog[1] and linkgit:git-gc[1] to learn how to control this pruning, and see the "SPECIFYING REVISIONS" -section of linkgit:git-rev-parse[1] for details. +section of linkgit:gitrevisions[1] for details. Note that the reflog history is very different from normal git history. While normal history is shared by every repository that works on the |