diff options
Diffstat (limited to 'Documentation')
| -rw-r--r-- | Documentation/SubmittingPatches | 6 | ||||
| -rw-r--r-- | Documentation/config/core.txt | 14 | ||||
| -rw-r--r-- | Documentation/git-daemon.txt | 2 | ||||
| -rw-r--r-- | Documentation/git-filter-branch.txt | 2 | ||||
| -rw-r--r-- | Documentation/git-help.txt | 4 | ||||
| -rw-r--r-- | Documentation/git-ls-tree.txt | 4 | ||||
| -rw-r--r-- | Documentation/git-remote-ext.txt | 2 | ||||
| -rw-r--r-- | Documentation/git-submodule.txt | 2 | ||||
| -rw-r--r-- | Documentation/git-web--browse.txt | 4 | ||||
| -rw-r--r-- | Documentation/gitk.txt | 8 | ||||
| -rw-r--r-- | Documentation/gitmodules.txt | 2 | ||||
| -rw-r--r-- | Documentation/gitrepository-layout.txt | 2 | ||||
| -rw-r--r-- | Documentation/gitweb.conf.txt | 30 | ||||
| -rw-r--r-- | Documentation/gitweb.txt | 38 | ||||
| -rw-r--r-- | Documentation/howto/setup-git-server-over-http.txt | 4 | ||||
| -rw-r--r-- | Documentation/revisions.txt | 4 | ||||
| -rw-r--r-- | Documentation/sequencer.txt | 2 |
17 files changed, 65 insertions, 65 deletions
diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches index ec8b205145..6d589e118c 100644 --- a/Documentation/SubmittingPatches +++ b/Documentation/SubmittingPatches @@ -372,15 +372,15 @@ such as "Thanks-to:", "Based-on-patch-by:", or "Mentored-by:". Some parts of the system have dedicated maintainers with their own repositories. -- 'git-gui/' comes from git-gui project, maintained by Pat Thoyts: +- `git-gui/` comes from git-gui project, maintained by Pat Thoyts: git://repo.or.cz/git-gui.git -- 'gitk-git/' comes from Paul Mackerras's gitk project: +- `gitk-git/` comes from Paul Mackerras's gitk project: git://ozlabs.org/~paulus/gitk -- 'po/' comes from the localization coordinator, Jiang Xin: +- `po/` comes from the localization coordinator, Jiang Xin: https://github.com/git-l10n/git-po/ diff --git a/Documentation/config/core.txt b/Documentation/config/core.txt index 7e9b6c8f4c..75538d27e7 100644 --- a/Documentation/config/core.txt +++ b/Documentation/config/core.txt @@ -414,7 +414,7 @@ Common unit suffixes of 'k', 'm', or 'g' are supported. core.excludesFile:: Specifies the pathname to the file that contains patterns to describe paths that are not meant to be tracked, in addition - to '.gitignore' (per-directory) and '.git/info/exclude'. + to `.gitignore` (per-directory) and `.git/info/exclude`. Defaults to `$XDG_CONFIG_HOME/git/ignore`. If `$XDG_CONFIG_HOME` is either not set or empty, `$HOME/.config/git/ignore` is used instead. See linkgit:gitignore[5]. @@ -429,8 +429,8 @@ core.askPass:: command-line argument and write the password on its STDOUT. core.attributesFile:: - In addition to '.gitattributes' (per-directory) and - '.git/info/attributes', Git looks into this file for attributes + In addition to `.gitattributes` (per-directory) and + `.git/info/attributes`, Git looks into this file for attributes (see linkgit:gitattributes[5]). Path expansions are made the same way as for `core.excludesFile`. Its default value is `$XDG_CONFIG_HOME/git/attributes`. If `$XDG_CONFIG_HOME` is either not @@ -438,10 +438,10 @@ core.attributesFile:: core.hooksPath:: By default Git will look for your hooks in the - '$GIT_DIR/hooks' directory. Set this to different path, - e.g. '/etc/git/hooks', and Git will try to find your hooks in - that directory, e.g. '/etc/git/hooks/pre-receive' instead of - in '$GIT_DIR/hooks/pre-receive'. + `$GIT_DIR/hooks` directory. Set this to different path, + e.g. `/etc/git/hooks`, and Git will try to find your hooks in + that directory, e.g. `/etc/git/hooks/pre-receive` instead of + in `$GIT_DIR/hooks/pre-receive`. + The path can be either absolute or relative. A relative path is taken as relative to the directory where the hooks are run (see diff --git a/Documentation/git-daemon.txt b/Documentation/git-daemon.txt index 56d54a4898..fdc28c041c 100644 --- a/Documentation/git-daemon.txt +++ b/Documentation/git-daemon.txt @@ -57,7 +57,7 @@ OPTIONS This is sort of "Git root" - if you run 'git daemon' with '--base-path=/srv/git' on example.com, then if you later try to pull 'git://example.com/hello.git', 'git daemon' will interpret the path - as '/srv/git/hello.git'. + as `/srv/git/hello.git`. --base-path-relaxed:: If --base-path is enabled and repo lookup fails, with this option diff --git a/Documentation/git-filter-branch.txt b/Documentation/git-filter-branch.txt index e6f08ab189..6b53dd7e06 100644 --- a/Documentation/git-filter-branch.txt +++ b/Documentation/git-filter-branch.txt @@ -189,7 +189,7 @@ to other tags will be rewritten to point to the underlying commit. rewriting. When applying a tree filter, the command needs to temporarily check out the tree to some directory, which may consume considerable space in case of large projects. By default it - does this in the '.git-rewrite/' directory but you can override + does this in the `.git-rewrite/` directory but you can override that choice by this parameter. -f:: diff --git a/Documentation/git-help.txt b/Documentation/git-help.txt index c318bf87e1..f71db0daa2 100644 --- a/Documentation/git-help.txt +++ b/Documentation/git-help.txt @@ -171,8 +171,8 @@ variable, we launch 'kfmclient' to try to open the man page on an already opened konqueror in a new tab if possible. For consistency, we also try such a trick if 'man.konqueror.path' is -set to something like 'A_PATH_TO/konqueror'. That means we will try to -launch 'A_PATH_TO/kfmclient' instead. +set to something like `A_PATH_TO/konqueror`. That means we will try to +launch `A_PATH_TO/kfmclient` instead. If you really want to use 'konqueror', then you can use something like the following: diff --git a/Documentation/git-ls-tree.txt b/Documentation/git-ls-tree.txt index 9dee7bef35..a7515714da 100644 --- a/Documentation/git-ls-tree.txt +++ b/Documentation/git-ls-tree.txt @@ -27,9 +27,9 @@ in the current working directory. Note that: taken as relative to the current working directory. E.g. when you are in a directory 'sub' that has a directory 'dir', you can run 'git ls-tree -r HEAD dir' to list the contents of the tree (that is - 'sub/dir' in `HEAD`). You don't want to give a tree that is not at the + `sub/dir` in `HEAD`). You don't want to give a tree that is not at the root level (e.g. `git ls-tree -r HEAD:sub dir`) in this case, as that - would result in asking for 'sub/sub/dir' in the `HEAD` commit. + would result in asking for `sub/sub/dir` in the `HEAD` commit. However, the current working directory can be ignored by passing --full-tree option. diff --git a/Documentation/git-remote-ext.txt b/Documentation/git-remote-ext.txt index 3fc5d94336..6ccffa1c11 100644 --- a/Documentation/git-remote-ext.txt +++ b/Documentation/git-remote-ext.txt @@ -104,7 +104,7 @@ begins with `ext::`. Examples: link-level address). "ext::git-server-alias foo %G/repo% with% spaces %Vfoo":: - Represents a repository with path '/repo with spaces' accessed + Represents a repository with path `/repo with spaces` accessed using the helper program "git-server-alias foo". The hostname for the remote server passed in the protocol stream will be "foo" (this allows multiple virtual Git servers to share a diff --git a/Documentation/git-submodule.txt b/Documentation/git-submodule.txt index ba3c4df550..764bcf13e4 100644 --- a/Documentation/git-submodule.txt +++ b/Documentation/git-submodule.txt @@ -38,7 +38,7 @@ This may be either an absolute URL, or (if it begins with ./ or ../), the location relative to the superproject's default remote repository (Please note that to specify a repository 'foo.git' which is located right next to a superproject 'bar.git', you'll -have to use '../foo.git' instead of './foo.git' - as one might expect +have to use `../foo.git` instead of `./foo.git` - as one might expect when following the rules for relative URLs - because the evaluation of relative URLs in Git is identical to that of relative directories). + diff --git a/Documentation/git-web--browse.txt b/Documentation/git-web--browse.txt index fd952a5ff9..8d162b56c5 100644 --- a/Documentation/git-web--browse.txt +++ b/Documentation/git-web--browse.txt @@ -92,8 +92,8 @@ configuration variable, we launch 'kfmclient' to try to open the HTML man page on an already opened konqueror in a new tab if possible. For consistency, we also try such a trick if 'browser.konqueror.path' is -set to something like 'A_PATH_TO/konqueror'. That means we will try to -launch 'A_PATH_TO/kfmclient' instead. +set to something like `A_PATH_TO/konqueror`. That means we will try to +launch `A_PATH_TO/kfmclient` instead. If you really want to use 'konqueror', then you can use something like the following: diff --git a/Documentation/gitk.txt b/Documentation/gitk.txt index 244cd01493..1eabb0aaf3 100644 --- a/Documentation/gitk.txt +++ b/Documentation/gitk.txt @@ -168,12 +168,12 @@ Files ----- User configuration and preferences are stored at: -* '$XDG_CONFIG_HOME/git/gitk' if it exists, otherwise -* '$HOME/.gitk' if it exists +* `$XDG_CONFIG_HOME/git/gitk` if it exists, otherwise +* `$HOME/.gitk` if it exists -If neither of the above exist then '$XDG_CONFIG_HOME/git/gitk' is created and +If neither of the above exist then `$XDG_CONFIG_HOME/git/gitk` is created and used by default. If '$XDG_CONFIG_HOME' is not set it defaults to -'$HOME/.config' in all cases. +`$HOME/.config` in all cases. History ------- diff --git a/Documentation/gitmodules.txt b/Documentation/gitmodules.txt index 312b6f9259..a66e95b70c 100644 --- a/Documentation/gitmodules.txt +++ b/Documentation/gitmodules.txt @@ -115,7 +115,7 @@ Consider the following .gitmodules file: This defines two submodules, `libfoo` and `libbar`. These are expected to -be checked out in the paths 'include/foo' and 'include/bar', and for both +be checked out in the paths `include/foo` and `include/bar`, and for both submodules a URL is specified which can be used for cloning the submodules. SEE ALSO diff --git a/Documentation/gitrepository-layout.txt b/Documentation/gitrepository-layout.txt index 366dee238c..216b11ee88 100644 --- a/Documentation/gitrepository-layout.txt +++ b/Documentation/gitrepository-layout.txt @@ -84,7 +84,7 @@ objects/info/alternates:: to the object database, not to the repository!) in your alternates file, but it will not work if you use absolute paths unless the absolute path in filesystem and web URL - is the same. See also 'objects/info/http-alternates'. + is the same. See also `objects/info/http-alternates`. objects/info/http-alternates:: This file records URLs to alternate object stores that diff --git a/Documentation/gitweb.conf.txt b/Documentation/gitweb.conf.txt index 92535dbac5..18e1b6ad4c 100644 --- a/Documentation/gitweb.conf.txt +++ b/Documentation/gitweb.conf.txt @@ -50,11 +50,11 @@ following order: * built-in values (some set during build stage), * common system-wide configuration file (defaults to - '/etc/gitweb-common.conf'), + `/etc/gitweb-common.conf`), * either per-instance configuration file (defaults to 'gitweb_config.perl' in the same directory as the installed gitweb), or if it does not exists - then fallback system-wide configuration file (defaults to '/etc/gitweb.conf'). + then fallback system-wide configuration file (defaults to `/etc/gitweb.conf`). Values obtained in later configuration files override values obtained earlier in the above sequence. @@ -82,7 +82,7 @@ You can include other configuration file using read_config_file() subroutine. For example, one might want to put gitweb configuration related to access control for viewing repositories via Gitolite (one of Git repository management tools) in a separate file, e.g. in -'/etc/gitweb-gitolite.conf'. To include it, put +`/etc/gitweb-gitolite.conf`. To include it, put -------------------------------------------------- read_config_file("/etc/gitweb-gitolite.conf"); @@ -142,7 +142,7 @@ and its path_info based equivalent http://git.example.com/gitweb.cgi/foo/bar.git ------------------------------------------------ + -will map to the path '/srv/git/foo/bar.git' on the filesystem. +will map to the path `/srv/git/foo/bar.git` on the filesystem. $projects_list:: Name of a plain text file listing projects, or a name of directory @@ -234,9 +234,9 @@ $GIT:: $mimetypes_file:: File to use for (filename extension based) guessing of MIME types before - trying '/etc/mime.types'. *NOTE* that this path, if relative, is taken + trying `/etc/mime.types`. *NOTE* that this path, if relative, is taken as relative to the current Git repository, not to CGI script. If unset, - only '/etc/mime.types' is used (if present on filesystem). If no mimetypes + only `/etc/mime.types` is used (if present on filesystem). If no mimetypes file is found, mimetype guessing based on extension of file is disabled. Unset by default. @@ -297,8 +297,8 @@ relative to base URI of gitweb. + This list should contain the URI of gitweb's standard stylesheet. The default URI of gitweb stylesheet can be set at build time using the `GITWEB_CSS` -makefile variable. Its default value is 'static/gitweb.css' -(or 'static/gitweb.min.css' if the `CSSMIN` variable is defined, +makefile variable. Its default value is `static/gitweb.css` +(or `static/gitweb.min.css` if the `CSSMIN` variable is defined, i.e. if CSS minifier is used during build). + *Note*: there is also a legacy `$stylesheet` configuration variable, which was @@ -311,7 +311,7 @@ $logo:: is displayed in the top right corner of each gitweb page and used as a logo for the Atom feed. Relative to the base URI of gitweb (as a path). Can be adjusted when building gitweb using `GITWEB_LOGO` variable - By default set to 'static/git-logo.png'. + By default set to `static/git-logo.png`. $favicon:: Points to the location where you put 'git-favicon.png' on your web @@ -320,7 +320,7 @@ $favicon:: may display them in the browser's URL bar and next to the site name in bookmarks. Relative to the base URI of gitweb. Can be adjusted at build time using `GITWEB_FAVICON` variable. - By default set to 'static/git-favicon.png'. + By default set to `static/git-favicon.png`. $javascript:: Points to the location where you put 'gitweb.js' on your web server, @@ -328,7 +328,7 @@ $javascript:: Relative to the base URI of gitweb. Can be set at build time using the `GITWEB_JS` build-time configuration variable. + -The default value is either 'static/gitweb.js', or 'static/gitweb.min.js' if +The default value is either `static/gitweb.js`, or `static/gitweb.min.js` if the `JSMIN` build variable was defined, i.e. if JavaScript minifier was used at build time. *Note* that this single file is generated from multiple individual JavaScript "modules". @@ -444,7 +444,7 @@ $default_blob_plain_mimetype:: doesn't result in some other type; by default "text/plain". Gitweb guesses mimetype of a file to display based on extension of its filename, using `$mimetypes_file` (if set and file exists) - and '/etc/mime.types' files (see *mime.types*(5) manpage; only + and `/etc/mime.types` files (see *mime.types*(5) manpage; only filename extension rules are supported by gitweb). $default_text_plain_charset:: @@ -486,7 +486,7 @@ affects how "summary" pages look like, or load limiting). (for example one for `git://` protocol, and one for `http://` protocol). + -Note that per repository configuration can be set in '$GIT_DIR/cloneurl' +Note that per repository configuration can be set in `$GIT_DIR/cloneurl` file, or as values of multi-value `gitweb.url` configuration variable in project config. Per-repository configuration takes precedence over value composed from `@git_base_url_list` elements and project name. @@ -520,7 +520,7 @@ $maxload:: If the server load exceeds this value then gitweb will return "503 Service Unavailable" error. The server load is taken to be 0 if gitweb cannot determine its value. Currently it works only on Linux, - where it uses '/proc/loadavg'; the load there is the number of active + where it uses `/proc/loadavg`; the load there is the number of active tasks on the system -- processes that are actually running -- averaged over the last minute. + @@ -739,7 +739,7 @@ Currently available providers are *"gravatar"* and *"picon"*. Only one provider at a time can be selected ('default' is one element list). If an unknown provider is specified, the feature is disabled. *Note* that some providers might require extra Perl packages to be -installed; see 'gitweb/INSTALL' for more details. +installed; see `gitweb/INSTALL` for more details. + This feature can be configured on a per-repository basis via repository's `gitweb.avatar` configuration variable. diff --git a/Documentation/gitweb.txt b/Documentation/gitweb.txt index 88450589af..c7436098c9 100644 --- a/Documentation/gitweb.txt +++ b/Documentation/gitweb.txt @@ -36,7 +36,7 @@ browsed using gitweb itself. CONFIGURATION ------------- Various aspects of gitweb's behavior can be controlled through the configuration -file 'gitweb_config.perl' or '/etc/gitweb.conf'. See the linkgit:gitweb.conf[5] +file `gitweb_config.perl` or `/etc/gitweb.conf`. See the linkgit:gitweb.conf[5] for details. Repositories @@ -51,7 +51,7 @@ projects' root" subsection). our $projectroot = '/path/to/parent/directory'; ----------------------------------------------------------------------- -The default value for `$projectroot` is '/pub/git'. You can change it during +The default value for `$projectroot` is `/pub/git`. You can change it during building gitweb via `GITWEB_PROJECTROOT` build configuration variable. By default all Git repositories under `$projectroot` are visible and available @@ -231,7 +231,7 @@ Unnamed repository; edit this file to name it for gitweb. ------------------------------------------------------------------------------- + from the template during repository creation, usually installed in -'/usr/share/git-core/templates/'. You can use the `gitweb.description` repo +`/usr/share/git-core/templates/`. You can use the `gitweb.description` repo configuration variable, but the file takes precedence. category (or `gitweb.category`):: @@ -407,7 +407,7 @@ in the instructions so they can be included in a future release. Apache as CGI ~~~~~~~~~~~~~ Apache must be configured to support CGI scripts in the directory in -which gitweb is installed. Let's assume that it is '/var/www/cgi-bin' +which gitweb is installed. Let's assume that it is `/var/www/cgi-bin` directory. ----------------------------------------------------------------------- @@ -431,7 +431,7 @@ You can use mod_perl with gitweb. You must install Apache::Registry (for mod_perl 1.x) or ModPerl::Registry (for mod_perl 2.x) to enable this support. -Assuming that gitweb is installed to '/var/www/perl', the following +Assuming that gitweb is installed to `/var/www/perl`, the following Apache configuration (for mod_perl 2.x) is suitable. ----------------------------------------------------------------------- @@ -456,7 +456,7 @@ Apache with FastCGI ~~~~~~~~~~~~~~~~~~~ Gitweb works with Apache and FastCGI. First you need to rename, copy or symlink gitweb.cgi to gitweb.fcgi. Let's assume that gitweb is -installed in '/usr/share/gitweb' directory. The following Apache +installed in `/usr/share/gitweb` directory. The following Apache configuration is suitable (UNTESTED!) ----------------------------------------------------------------------- @@ -503,22 +503,22 @@ repositories, you can configure Apache like this: ----------------------------------------------------------------------- The above configuration expects your public repositories to live under -'/pub/git' and will serve them as `http://git.domain.org/dir-under-pub-git`, +`/pub/git` and will serve them as `http://git.domain.org/dir-under-pub-git`, both as clonable Git URL and as browseable gitweb interface. If you then start your linkgit:git-daemon[1] with `--base-path=/pub/git --export-all` then you can even use the `git://` URL with exactly the same path. Setting the environment variable `GITWEB_CONFIG` will tell gitweb to use the -named file (i.e. in this example '/etc/gitweb.conf') as a configuration for +named file (i.e. in this example `/etc/gitweb.conf`) as a configuration for gitweb. You don't really need it in above example; it is required only if your configuration file is in different place than built-in (during -compiling gitweb) 'gitweb_config.perl' or '/etc/gitweb.conf'. See +compiling gitweb) 'gitweb_config.perl' or `/etc/gitweb.conf`. See linkgit:gitweb.conf[5] for details, especially information about precedence rules. If you use the rewrite rules from the example you *might* also need something like the following in your gitweb configuration file -('/etc/gitweb.conf' following example): +(`/etc/gitweb.conf` following example): ---------------------------------------------------------------------------- @stylesheets = ("/some/absolute/path/gitweb.css"); $my_uri = "/"; @@ -575,7 +575,7 @@ like this: Here actual project root is passed to gitweb via `GITWEB_PROJECT_ROOT` environment variable from a web server, so you need to put the following -line in gitweb configuration file ('/etc/gitweb.conf' in above example): +line in gitweb configuration file (`/etc/gitweb.conf` in above example): -------------------------------------------------------------------------- $projectroot = $ENV{'GITWEB_PROJECTROOT'} || "/pub/git"; -------------------------------------------------------------------------- @@ -585,7 +585,7 @@ referenced by `$per_request_config`; These configurations enable two things. First, each unix user (`<user>`) of the server will be able to browse through gitweb Git repositories found in -'~/public_git/' with the following url: +`~/public_git/` with the following url: http://git.example.org/~<user>/ @@ -596,7 +596,7 @@ If you already use `mod_userdir` in your virtual host or you don't want to use the \'~' as first character, just comment or remove the second rewrite rule, and uncomment one of the following according to what you want. -Second, repositories found in '/pub/scm/' and '/var/git/' will be accessible +Second, repositories found in `/pub/scm/` and `/var/git/` will be accessible through `http://git.example.org/scm/` and `http://git.example.org/var/`. You can add as many project roots as you want by adding rewrite rules like the third and the fourth. @@ -614,7 +614,7 @@ that it consumes and produces URLs in the form http://git.example.com/project.git/shortlog/sometag i.e. without 'gitweb.cgi' part, by using a configuration such as the -following. This configuration assumes that '/var/www/gitweb' is the +following. This configuration assumes that `/var/www/gitweb` is the DocumentRoot of your webserver, contains the gitweb.cgi script and complementary static files (stylesheet, favicon, JavaScript): @@ -645,9 +645,9 @@ parameter. `@stylesheets`, `$my_uri` and `$home_link`, but you lose "dumb client" access to your project .git dirs (described in "Single URL for gitweb and for fetching" section). A possible workaround for the latter is the -following: in your project root dir (e.g. '/pub/git') have the projects -named *without* a .git extension (e.g. '/pub/git/project' instead of -'/pub/git/project.git') and configure Apache as follows: +following: in your project root dir (e.g. `/pub/git`) have the projects +named *without* a .git extension (e.g. `/pub/git/project` instead of +`/pub/git/project.git`) and configure Apache as follows: ---------------------------------------------------------------------------- <VirtualHost *:80> ServerAlias git.example.com @@ -681,7 +681,7 @@ cloned), while will provide human-friendly gitweb access. This solution is not 100% bulletproof, in the sense that if some project has -a named ref (branch, tag) starting with 'git/', then paths such as +a named ref (branch, tag) starting with `git/`, then paths such as http://git.example.com/project/command/abranch..git/abranch @@ -697,7 +697,7 @@ SEE ALSO -------- linkgit:gitweb.conf[5], linkgit:git-instaweb[1] -'gitweb/README', 'gitweb/INSTALL' +`gitweb/README`, `gitweb/INSTALL` GIT --- diff --git a/Documentation/howto/setup-git-server-over-http.txt b/Documentation/howto/setup-git-server-over-http.txt index f44e5e9458..bfe6f9b500 100644 --- a/Documentation/howto/setup-git-server-over-http.txt +++ b/Documentation/howto/setup-git-server-over-http.txt @@ -244,8 +244,8 @@ Using a proxy: -------------- If you have to access the WebDAV server from behind an HTTP(S) proxy, -set the variable 'all_proxy' to 'http://proxy-host.com:port', or -'http://login-on-proxy:passwd-on-proxy@proxy-host.com:port'. See 'man +set the variable 'all_proxy' to `http://proxy-host.com:port`, or +`http://login-on-proxy:passwd-on-proxy@proxy-host.com:port`. See 'man curl' for details. diff --git a/Documentation/revisions.txt b/Documentation/revisions.txt index 72daa20e76..2337a995ec 100644 --- a/Documentation/revisions.txt +++ b/Documentation/revisions.txt @@ -58,7 +58,7 @@ when you run `git merge`. when you run `git cherry-pick`. + Note that any of the 'refs/*' cases above may come either from -the '$GIT_DIR/refs' directory or from the '$GIT_DIR/packed-refs' file. +the `$GIT_DIR/refs` directory or from the `$GIT_DIR/packed-refs` file. While the ref name encoding is unspecified, UTF-8 is preferred as some output processing may assume ref names in UTF-8. @@ -108,7 +108,7 @@ some output processing may assume ref names in UTF-8. `git push` were run while `branchname` was checked out (or the current `HEAD` if no branchname is specified). Since our push destination is in a remote repository, of course, we report the local tracking branch - that corresponds to that branch (i.e., something in 'refs/remotes/'). + that corresponds to that branch (i.e., something in `refs/remotes/`). + Here's an example to make it more clear: + diff --git a/Documentation/sequencer.txt b/Documentation/sequencer.txt index 5747f442f2..5a57c4a407 100644 --- a/Documentation/sequencer.txt +++ b/Documentation/sequencer.txt @@ -1,6 +1,6 @@ --continue:: Continue the operation in progress using the information in - '.git/sequencer'. Can be used to continue after resolving + `.git/sequencer`. Can be used to continue after resolving conflicts in a failed cherry-pick or revert. --quit:: |