diff options
Diffstat (limited to 'Documentation')
39 files changed, 1784 insertions, 794 deletions
diff --git a/Documentation/CodingGuidelines b/Documentation/CodingGuidelines index 48aa4edfbd..72967deb78 100644 --- a/Documentation/CodingGuidelines +++ b/Documentation/CodingGuidelines @@ -118,6 +118,24 @@ For shell scripts specifically (not exhaustive): do this fi + - If a command sequence joined with && or || or | spans multiple + lines, put each command on a separate line and put && and || and | + operators at the end of each line, rather than the start. This + means you don't need to use \ to join lines, since the above + operators imply the sequence isn't finished. + + (incorrect) + grep blob verify_pack_result \ + | awk -f print_1.awk \ + | sort >actual && + ... + + (correct) + grep blob verify_pack_result | + awk -f print_1.awk | + sort >actual && + ... + - We prefer "test" over "[ ... ]". - We do not write the noiseword "function" in front of shell diff --git a/Documentation/Makefile b/Documentation/Makefile index a42dcfc745..95f6a321f2 100644 --- a/Documentation/Makefile +++ b/Documentation/Makefile @@ -344,7 +344,7 @@ $(OBSOLETE_HTML): %.html : %.txto asciidoc.conf mv $@+ $@ manpage-base-url.xsl: manpage-base-url.xsl.in - sed "s|@@MAN_BASE_URL@@|$(MAN_BASE_URL)|" $< > $@ + $(QUIET_GEN)sed "s|@@MAN_BASE_URL@@|$(MAN_BASE_URL)|" $< > $@ %.1 %.5 %.7 : %.xml manpage-base-url.xsl $(QUIET_XMLTO)$(RM) $@ && \ diff --git a/Documentation/RelNotes/2.20.0.txt b/Documentation/RelNotes/2.20.0.txt new file mode 100644 index 0000000000..2cc5fd7a9f --- /dev/null +++ b/Documentation/RelNotes/2.20.0.txt @@ -0,0 +1,183 @@ +Git Release Notes +================= + +Backward Compatibility Notes +---------------------------- + + * "git branch -l <foo>" used to be a way to ask a reflog to be + created while creating a new branch, but that is no longer the + case. It is a short-hand for "git branch --list <foo>" now. + + * "git push" into refs/tags/* hierarchy is rejected without getting + forced, but "git fetch" (misguidedly) used the "fast forwarding" + rule used for the refs/heads/* hierarchy; this has been corrected, + which means some fetches of tags that did not fail with older + version of Git will fail without "--force" with this version. + + +Updates since v2.19 +------------------- + +UI, Workflows & Features + + * Running "git clone" against a project that contain two files with + pathnames that differ only in cases on a case insensitive + filesystem would result in one of the files lost because the + underlying filesystem is incapable of holding both at the same + time. An attempt is made to detect such a case and warn. + + * "git checkout -b newbranch [HEAD]" should not have to do as much as + checking out a commit different from HEAD. An attempt is made to + optimize this special case. + + * "git rev-list --stdin </dev/null" used to be an error; it now shows + no output without an error. "git rev-list --stdin --default HEAD" + still falls back to the given default when nothing is given on the + standard input. + + * Lift code from GitHub to restrict delta computation so that an + object that exists in one fork is not made into a delta against + another object that does not appear in the same forked repository. + + * "git format-patch" learned new "--interdiff" and "--range-diff" + options to explain the difference between this version and the + previous attempt in the cover letter (or after the tree-dashes as + a comment). + + * "git mailinfo" used in "git am" learned to make a best-effort + recovery of a patch corrupted by MUA that sends text/plain with + format=flawed option. + (merge 3aa4d81f88 rs/mailinfo-format-flowed later to maint). + + * The rules used by "git push" and "git fetch" to determine if a ref + can or cannot be updated were inconsistent; specifically, fetching + to update existing tags were allowed even though tags are supposed + to be unmoving anchoring points. "git fetch" was taught to forbid + updates to existing tags without the "--force" option. + + * "git multi-pack-index" learned to detect corruption in the .midx + file it uses, and this feature has been integrated into "git fsck". + + +Performance, Internal Implementation, Development Support etc. + + * When there are too many packfiles in a repository (which is not + recommended), looking up an object in these would require + consulting many pack .idx files; a new mechanism to have a single + file that consolidates all of these .idx files is introduced. + + * "git submodule update" is getting rewritten piece-by-piece into C. + + * The code for computing history reachability has been shuffled, + obtained a bunch of new tests to cover them, and then being + improved. + + * The unpack_trees() API used in checking out a branch and merging + walks one or more trees along with the index. When the cache-tree + in the index tells us that we are walking a tree whose flattened + contents is known (i.e. matches a span in the index), as linearly + scanning a span in the index is much more efficient than having to + open tree objects recursively and listing their entries, the walk + can be optimized, which has been done. + + * When creating a thin pack, which allows objects to be made into a + delta against another object that is not in the resulting pack but + is known to be present on the receiving end, the code learned to + take advantage of the reachability bitmap; this allows the server + to send a delta against a base beyond the "boundary" commit. + + * spatch transformation to replace boolean uses of !hashcmp() to + newly introduced oideq() is added, and applied, to regain + performance lost due to support of multiple hash algorithms. + + * Fix a bug in which the same path could be registered under multiple + worktree entries if the path was missing (for instance, was removed + manually). Also, as a convenience, expand the number of cases in + which --force is applicable. + + * Split Documentation/config.txt for easier maintenance. + (merge 6014363f0b nd/config-split later to maint). + + * Test helper binaries clean-up. + (merge c9a1f4161f nd/test-tool later to maint). + + * Various tests have been updated to make it easier to swap the + hash function used for object identification. + (merge ae0c89d41b bc/hash-independent-tests later to maint). + + * Update fsck.skipList implementation and documentation. + (merge 371a655074 ab/fsck-skiplist later to maint). + + +Fixes since v2.19 +----------------- + + * "git interpret-trailers" and its underlying machinery had a buggy + code that attempted to ignore patch text after commit log message, + which triggered in various codepaths that will always get the log + message alone and never get such an input. + (merge 66e83d9b41 jk/trailer-fixes later to maint). + + * Malformed or crafted data in packstream can make our code attempt + to read or write past the allocated buffer and abort, instead of + reporting an error, which has been fixed. + + * "git rebase -i" did not clear the state files correctly when a run + of "squash/fixup" is aborted and then the user manually amended the + commit instead, which has been corrected. + (merge 10d2f35436 js/rebase-i-autosquash-fix later to maint). + + * When fsmonitor is in use, after operation on submodules updates + .gitmodules, we lost track of the fact that we did so and relied on + stale fsmonitor data. + (merge 43f1180814 bp/mv-submodules-with-fsmonitor later to maint). + + * Fix for a long-standing bug that leaves the index file corrupt when + it shrinks during a partial commit. + (merge 6c003d6ffb jk/reopen-tempfile-truncate later to maint). + + * Further fix for O_APPEND emulation on Windows + (merge eeaf7ddac7 js/mingw-o-append later to maint). + + * A corner case bugfix in "git rerere" code. + (merge ad2bf0d9b4 en/rerere-multi-stage-1-fix later to maint). + + * "git add ':(attr:foo)'" is not supported and is supposed to be + rejected while the command line arguments are parsed, but we fail + to reject such a command line upfront. + (merge 84d938b732 nd/attr-pathspec-fix later to maint). + + * Recent update broke the reachability algorithm when refs (e.g. + tags) that point at objects that are not commit were involved, + which has been fixed. + + * "git rebase" etc. in Git 2.19 fails to abort when given an empty + commit log message as result of editing, which has been corrected. + (merge a3ec9eaf38 en/sequencer-empty-edit-result-aborts later to maint). + + * The code to backfill objects in lazily cloned repository did not + work correctly, which has been corrected. + (merge e68302011c jt/lazy-object-fetch-fix later to maint). + + * Update error messages given by "git remote" and make them consistent. + (merge 5025425dff ms/remote-error-message-update later to maint). + + * "git update-ref" learned to make both "--no-deref" and "--stdin" + work at the same time. + (merge d345e9fbe7 en/update-ref-no-deref-stdin later to maint). + + * Recently added "range-diff" had a corner-case bug to cause it + segfault, which has been corrected. + (merge e467a90c7a tg/range-diff-corner-case-fix later to maint). + + * Code cleanup, docfix, build fix, etc. + (merge 96a7501aad ts/doc-build-manpage-xsl-quietly later to maint). + (merge b9b07efdb2 tg/conflict-marker-size later to maint). + (merge fa0aeea770 sg/doc-trace-appends later to maint). + (merge d64324cb60 tb/void-check-attr later to maint). + (merge c3b9bc94b9 en/double-semicolon-fix later to maint). + (merge 79336116f5 sg/t3701-tighten-trace later to maint). + (merge 801fa63a90 jk/dev-build-format-security later to maint). + (merge 0597dd62ba sb/string-list-remove-unused later to maint). + (merge db2d36fad8 bw/protocol-v2 later to maint). + (merge 456d7cd3a9 sg/split-index-test later to maint). diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches index b44fd51f27..ec8b205145 100644 --- a/Documentation/SubmittingPatches +++ b/Documentation/SubmittingPatches @@ -80,7 +80,9 @@ GitHub-Travis CI hints section for details. Do not forget to update the documentation to describe the updated behavior and make sure that the resulting documentation set formats -well. It is currently a liberal mixture of US and UK English norms for +well (try the Documentation/doc-diff script). + +We currently have a liberal mixture of US and UK English norms for spelling and grammar, which is somewhat unfortunate. A huge patch that touches the files all over the place only to correct the inconsistency is not welcome, though. Potential clashes with other changes that can diff --git a/Documentation/config.txt b/Documentation/config.txt index eb66a11975..f6f4c21a54 100644 --- a/Documentation/config.txt +++ b/Documentation/config.txt @@ -225,7 +225,7 @@ boolean:: false;; Boolean false literals are `no`, `off`, `false`, `0` and the empty string. + -When converting value to the canonical form using `--bool` type +When converting a value to its canonical form using the `--type=bool` type specifier, 'git config' will ensure that the output is "true" or "false" (spelled in lowercase). @@ -832,12 +832,6 @@ core.packedRefsTimeout:: all; -1 means to try indefinitely. Default is 1000 (i.e., retry for 1 second). -sequence.editor:: - Text editor used by `git rebase -i` for editing the rebase instruction file. - The value is meant to be interpreted by the shell when it is used. - It can be overridden by the `GIT_SEQUENCE_EDITOR` environment variable. - When not configured the default commit message editor is used instead. - core.pager:: Text viewer for use by Git commands (e.g., 'less'). The value is meant to be interpreted by the shell. The order of preference @@ -937,6 +931,11 @@ core.useReplaceRefs:: option was given on the command line. See linkgit:git[1] and linkgit:git-replace[1] for more information. +core.multiPackIndex:: + Use the multi-pack-index file to track multiple packfiles using a + single index. See link:technical/multi-pack-index.html[the + multi-pack-index design document]. + core.sparseCheckout:: Enable "sparse checkout" feature. See section "Sparse checkout" in linkgit:git-read-tree[1] for more information. @@ -1154,6 +1153,14 @@ and by linkgit:git-worktree[1] when 'git worktree add' refers to a remote branch. This setting might be used for other checkout-like commands or functionality in the future. +checkout.optimizeNewBranch:: + Optimizes the performance of "git checkout -b <new_branch>" when + using sparse-checkout. When set to true, git will not update the + repo based on the current sparse-checkout settings. This means it + will not update the skip-worktree bit in the index nor add/remove + files in the working directory to reflect the current sparse checkout + settings nor will it show the local changes. + clean.requireForce:: A boolean to make git-clean do nothing unless given -f, -i or -n. Defaults to true. @@ -1507,159 +1514,9 @@ fastimport.unpackLimit:: operation complete faster, especially on slow filesystems. If not set, the value of `transfer.unpackLimit` is used instead. -fetch.recurseSubmodules:: - This option can be either set to a boolean value or to 'on-demand'. - Setting it to a boolean changes the behavior of fetch and pull to - unconditionally recurse into submodules when set to true or to not - recurse at all when set to false. When set to 'on-demand' (the default - value), fetch and pull will only recurse into a populated submodule - when its superproject retrieves a commit that updates the submodule's - reference. - -fetch.fsckObjects:: - If it is set to true, git-fetch-pack will check all fetched - objects. See `transfer.fsckObjects` for what's - checked. Defaults to false. If not set, the value of - `transfer.fsckObjects` is used instead. - -fetch.fsck.<msg-id>:: - Acts like `fsck.<msg-id>`, but is used by - linkgit:git-fetch-pack[1] instead of linkgit:git-fsck[1]. See - the `fsck.<msg-id>` documentation for details. - -fetch.fsck.skipList:: - Acts like `fsck.skipList`, but is used by - linkgit:git-fetch-pack[1] instead of linkgit:git-fsck[1]. See - the `fsck.skipList` documentation for details. - -fetch.unpackLimit:: - If the number of objects fetched over the Git native - transfer is below this - limit, then the objects will be unpacked into loose object - files. However if the number of received objects equals or - exceeds this limit then the received pack will be stored as - a pack, after adding any missing delta bases. Storing the - pack from a push can make the push operation complete faster, - especially on slow filesystems. If not set, the value of - `transfer.unpackLimit` is used instead. - -fetch.prune:: - If true, fetch will automatically behave as if the `--prune` - option was given on the command line. See also `remote.<name>.prune` - and the PRUNING section of linkgit:git-fetch[1]. - -fetch.pruneTags:: - If true, fetch will automatically behave as if the - `refs/tags/*:refs/tags/*` refspec was provided when pruning, - if not set already. This allows for setting both this option - and `fetch.prune` to maintain a 1=1 mapping to upstream - refs. See also `remote.<name>.pruneTags` and the PRUNING - section of linkgit:git-fetch[1]. - -fetch.output:: - Control how ref update status is printed. Valid values are - `full` and `compact`. Default value is `full`. See section - OUTPUT in linkgit:git-fetch[1] for detail. - -fetch.negotiationAlgorithm:: - Control how information about the commits in the local repository is - sent when negotiating the contents of the packfile to be sent by the - server. Set to "skipping" to use an algorithm that skips commits in an - effort to converge faster, but may result in a larger-than-necessary - packfile; The default is "default" which instructs Git to use the default algorithm - that never skips commits (unless the server has acknowledged it or one - of its descendants). - Unknown values will cause 'git fetch' to error out. -+ -See also the `--negotiation-tip` option for linkgit:git-fetch[1]. - -format.attach:: - Enable multipart/mixed attachments as the default for - 'format-patch'. The value can also be a double quoted string - which will enable attachments as the default and set the - value as the boundary. See the --attach option in - linkgit:git-format-patch[1]. - -format.from:: - Provides the default value for the `--from` option to format-patch. - Accepts a boolean value, or a name and email address. If false, - format-patch defaults to `--no-from`, using commit authors directly in - the "From:" field of patch mails. If true, format-patch defaults to - `--from`, using your committer identity in the "From:" field of patch - mails and including a "From:" field in the body of the patch mail if - different. If set to a non-boolean value, format-patch uses that - value instead of your committer identity. Defaults to false. - -format.numbered:: - A boolean which can enable or disable sequence numbers in patch - subjects. It defaults to "auto" which enables it only if there - is more than one patch. It can be enabled or disabled for all - messages by setting it to "true" or "false". See --numbered - option in linkgit:git-format-patch[1]. - -format.headers:: - Additional email headers to include in a patch to be submitted - by mail. See linkgit:git-format-patch[1]. - -format.to:: -format.cc:: - Additional recipients to include in a patch to be submitted - by mail. See the --to and --cc options in - linkgit:git-format-patch[1]. - -format.subjectPrefix:: - The default for format-patch is to output files with the '[PATCH]' - subject prefix. Use this variable to change that prefix. - -format.signature:: - The default for format-patch is to output a signature containing - the Git version number. Use this variable to change that default. - Set this variable to the empty string ("") to suppress - signature generation. - -format.signatureFile:: - Works just like format.signature except the contents of the - file specified by this variable will be used as the signature. - -format.suffix:: - The default for format-patch is to output files with the suffix - `.patch`. Use this variable to change that suffix (make sure to - include the dot if you want it). - -format.pretty:: - The default pretty format for log/show/whatchanged command, - See linkgit:git-log[1], linkgit:git-show[1], - linkgit:git-whatchanged[1]. - -format.thread:: - The default threading style for 'git format-patch'. Can be - a boolean value, or `shallow` or `deep`. `shallow` threading - makes every mail a reply to the head of the series, - where the head is chosen from the cover letter, the - `--in-reply-to`, and the first patch mail, in this order. - `deep` threading makes every mail a reply to the previous one. - A true boolean value is the same as `shallow`, and a false - value disables threading. - -format.signOff:: - A boolean value which lets you enable the `-s/--signoff` option of - format-patch by default. *Note:* Adding the Signed-off-by: line to a - patch should be a conscious act and means that you certify you have - the rights to submit this work under the same open source license. - Please see the 'SubmittingPatches' document for further discussion. - -format.coverLetter:: - A boolean that controls whether to generate a cover-letter when - format-patch is invoked, but in addition can be set to "auto", to - generate a cover-letter only when there's more than one patch. - -format.outputDirectory:: - Set a custom directory to store the resulting files instead of the - current working directory. - -format.useAutoBase:: - A boolean value which lets you enable the `--base=auto` option of - format-patch by default. +include::fetch-config.txt[] + +include::format-config.txt[] filter.<driver>.clean:: The command which is used to convert the content of a worktree @@ -1710,12 +1567,16 @@ doing the same for `receive.fsck.<msg-id>` and `fetch.fsck.<msg-id>` will only cause git to warn. fsck.skipList:: - The path to a sorted list of object names (i.e. one SHA-1 per + The path to a list of object names (i.e. one unabbreviated SHA-1 per line) that are known to be broken in a non-fatal way and should - be ignored. This feature is useful when an established project - should be accepted despite early commits containing errors that - can be safely ignored such as invalid committer email addresses. - Note: corrupt objects cannot be skipped with this setting. + be ignored. On versions of Git 2.20 and later comments ('#'), empty + lines, and any leading and trailing whitespace is ignored. Everything + but a SHA-1 per line will error out on older versions. ++ +This feature is useful when an established project should be accepted +despite early commits containing errors that can be safely ignored +such as invalid committer email addresses. Note: corrupt objects +cannot be skipped with this setting. + Like `fsck.<msg-id>` this variable has corresponding `receive.fsck.skipList` and `fetch.fsck.skipList` variants. @@ -1725,6 +1586,15 @@ Unlike variables like `color.ui` and `core.editor` the fall back on the `fsck.skipList` configuration if they aren't set. To uniformly configure the same fsck settings in different circumstances all three of them they must all set to the same values. ++ +Older versions of Git (before 2.20) documented that the object names +list should be sorted. This was never a requirement, the object names +could appear in any order, but when reading the list we tracked whether +the list was sorted for the purposes of an internal binary search +implementation, which could save itself some work with an already sorted +list. Unless you had a humongous list there was no reason to go out of +your way to pre-sort the list. After Git version 2.20 a hash implementation +is used instead, so there's now no reason to pre-sort the list. gc.aggressiveDepth:: The depth parameter used in the delta compression @@ -1773,7 +1643,8 @@ gc.writeCommitGraph:: for details. gc.logExpiry:: - If the file gc.log exists, then `git gc --auto` won't run + If the file gc.log exists, then `git gc --auto` will print + its content and exit with status zero instead of running unless that file is more than 'gc.logExpiry' old. Default is "1.day". See `gc.pruneExpire` for more ways to specify its value. @@ -1834,73 +1705,7 @@ gc.rerereUnresolved:: You can also use more human-readable "1.month.ago", etc. The default is 15 days. See linkgit:git-rerere[1]. -gitcvs.commitMsgAnnotation:: - Append this string to each commit message. Set to empty string - to disable this feature. Defaults to "via git-CVS emulator". - -gitcvs.enabled:: - Whether the CVS server interface is enabled for this repository. - See linkgit:git-cvsserver[1]. - -gitcvs.logFile:: - Path to a log file where the CVS server interface well... logs - various stuff. See linkgit:git-cvsserver[1]. - -gitcvs.usecrlfattr:: - If true, the server will look up the end-of-line conversion - attributes for files to determine the `-k` modes to use. If - the attributes force Git to treat a file as text, - the `-k` mode will be left blank so CVS clients will - treat it as text. If they suppress text conversion, the file - will be set with '-kb' mode, which suppresses any newline munging - the client might otherwise do. If the attributes do not allow - the file type to be determined, then `gitcvs.allBinary` is - used. See linkgit:gitattributes[5]. - -gitcvs.allBinary:: - This is used if `gitcvs.usecrlfattr` does not resolve - the correct '-kb' mode to use. If true, all - unresolved files are sent to the client in - mode '-kb'. This causes the client to treat them - as binary files, which suppresses any newline munging it - otherwise might do. Alternatively, if it is set to "guess", - then the contents of the file are examined to decide if - it is binary, similar to `core.autocrlf`. - -gitcvs.dbName:: - Database used by git-cvsserver to cache revision information - derived from the Git repository. The exact meaning depends on the - used database driver, for SQLite (which is the default driver) this - is a filename. Supports variable substitution (see - linkgit:git-cvsserver[1] for details). May not contain semicolons (`;`). - Default: '%Ggitcvs.%m.sqlite' - -gitcvs.dbDriver:: - Used Perl DBI driver. You can specify any available driver - for this here, but it might not work. git-cvsserver is tested - with 'DBD::SQLite', reported to work with 'DBD::Pg', and - reported *not* to work with 'DBD::mysql'. Experimental feature. - May not contain double colons (`:`). Default: 'SQLite'. - See linkgit:git-cvsserver[1]. - -gitcvs.dbUser, gitcvs.dbPass:: - Database user and password. Only useful if setting `gitcvs.dbDriver`, - since SQLite has no concept of database users and/or passwords. - 'gitcvs.dbUser' supports variable substitution (see - linkgit:git-cvsserver[1] for details). - -gitcvs.dbTableNamePrefix:: - Database table name prefix. Prepended to the names of any - database tables used, allowing a single database to be used - for several repositories. Supports variable substitution (see - linkgit:git-cvsserver[1] for details). Any non-alphabetic - characters will be replaced with underscores. - -All gitcvs variables except for `gitcvs.usecrlfattr` and -`gitcvs.allBinary` can also be specified as -'gitcvs.<access_method>.<varname>' (where 'access_method' -is one of "ext" and "pserver") to make them apply only for the given -access method. +include::gitcvs-config.txt[] gitweb.category:: gitweb.description:: @@ -1965,63 +1770,7 @@ gpg.<format>.program:: be used as a legacy synonym for `gpg.openpgp.program`. The default value for `gpg.x509.program` is "gpgsm". -gui.commitMsgWidth:: - Defines how wide the commit message window is in the - linkgit:git-gui[1]. "75" is the default. - -gui.diffContext:: - Specifies how many context lines should be used in calls to diff - made by the linkgit:git-gui[1]. The default is "5". - -gui.displayUntracked:: - Determines if linkgit:git-gui[1] shows untracked files - in the file list. The default is "true". - -gui.encoding:: - Specifies the default encoding to use for displaying of - file contents in linkgit:git-gui[1] and linkgit:gitk[1]. - It can be overridden by setting the 'encoding' attribute - for relevant files (see linkgit:gitattributes[5]). - If this option is not set, the tools default to the - locale encoding. - -gui.matchTrackingBranch:: - Determines if new branches created with linkgit:git-gui[1] should - default to tracking remote branches with matching names or - not. Default: "false". - -gui.newBranchTemplate:: - Is used as suggested name when creating new branches using the - linkgit:git-gui[1]. - -gui.pruneDuringFetch:: - "true" if linkgit:git-gui[1] should prune remote-tracking branches when - performing a fetch. The default value is "false". - -gui.trustmtime:: - Determines if linkgit:git-gui[1] should trust the file modification - timestamp or not. By default the timestamps are not trusted. - -gui.spellingDictionary:: - Specifies the dictionary used for spell checking commit messages in - the linkgit:git-gui[1]. When set to "none" spell checking is turned - off. - -gui.fastCopyBlame:: - If true, 'git gui blame' uses `-C` instead of `-C -C` for original - location detection. It makes blame significantly faster on huge - repositories at the expense of less thorough copy detection. - -gui.copyBlameThreshold:: - Specifies the threshold to use in 'git gui blame' original location - detection, measured in alphanumeric characters. See the - linkgit:git-blame[1] manual for more information on copy detection. - -gui.blamehistoryctx:: - Specifies the radius of history context in days to show in - linkgit:gitk[1] for the selected commit, when the `Show History - Context` menu item is invoked from 'git gui blame'. If this - variable is set to zero, the whole history is shown. +include::gui-config.txt[] guitool.<name>.cmd:: Specifies the shell command line to execute when the corresponding item @@ -2671,6 +2420,21 @@ Note that changing the compression level will not automatically recompress all existing objects. You can force recompression by passing the -F option to linkgit:git-repack[1]. +pack.island:: + An extended regular expression configuring a set of delta + islands. See "DELTA ISLANDS" in linkgit:git-pack-objects[1] + for details. + +pack.islandCore:: + Specify an island name which gets to have its objects be + packed first. This creates a kind of pseudo-pack at the front + of one pack, so that the objects from the specified island are + hopefully faster to copy into any pack that should be served + to a user requesting these objects. In practice this means + that the island specified should likely correspond to what is + the most commonly cloned in the repo. See also "DELTA ISLANDS" + in linkgit:git-pack-objects[1]. + pack.deltaCacheSize:: The maximum memory in bytes used for caching deltas in linkgit:git-pack-objects[1] before writing them out to a pack. @@ -2828,284 +2592,17 @@ protocol.version:: * `1` - the original wire protocol with the addition of a version string in the initial response from the server. --- - -pull.ff:: - By default, Git does not create an extra merge commit when merging - a commit that is a descendant of the current commit. Instead, the - tip of the current branch is fast-forwarded. When set to `false`, - this variable tells Git to create an extra merge commit in such - a case (equivalent to giving the `--no-ff` option from the command - line). When set to `only`, only such fast-forward merges are - allowed (equivalent to giving the `--ff-only` option from the - command line). This setting overrides `merge.ff` when pulling. - -pull.rebase:: - When true, rebase branches on top of the fetched branch, instead - of merging the default branch from the default remote when "git - pull" is run. See "branch.<name>.rebase" for setting this on a - per-branch basis. -+ -When `merges`, pass the `--rebase-merges` option to 'git rebase' -so that the local merge commits are included in the rebase (see -linkgit:git-rebase[1] for details). -+ -When preserve, also pass `--preserve-merges` along to 'git rebase' -so that locally committed merge commits will not be flattened -by running 'git pull'. -+ -When the value is `interactive`, the rebase is run in interactive mode. -+ -*NOTE*: this is a possibly dangerous operation; do *not* use -it unless you understand the implications (see linkgit:git-rebase[1] -for details). - -pull.octopus:: - The default merge strategy to use when pulling multiple branches - at once. - -pull.twohead:: - The default merge strategy to use when pulling a single branch. - -push.default:: - Defines the action `git push` should take if no refspec is - explicitly given. Different values are well-suited for - specific workflows; for instance, in a purely central workflow - (i.e. the fetch source is equal to the push destination), - `upstream` is probably what you want. Possible values are: -+ --- - -* `nothing` - do not push anything (error out) unless a refspec is - explicitly given. This is primarily meant for people who want to - avoid mistakes by always being explicit. - -* `current` - push the current branch to update a branch with the same - name on the receiving end. Works in both central and non-central - workflows. - -* `upstream` - push the current branch back to the branch whose - changes are usually integrated into the current branch (which is - called `@{upstream}`). This mode only makes sense if you are - pushing to the same repository you would normally pull from - (i.e. central workflow). - -* `tracking` - This is a deprecated synonym for `upstream`. - -* `simple` - in centralized workflow, work like `upstream` with an - added safety to refuse to push if the upstream branch's name is - different from the local one. -+ -When pushing to a remote that is different from the remote you normally -pull from, work as `current`. This is the safest option and is suited -for beginners. -+ -This mode has become the default in Git 2.0. - -* `matching` - push all branches having the same name on both ends. - This makes the repository you are pushing to remember the set of - branches that will be pushed out (e.g. if you always push 'maint' - and 'master' there and no other branches, the repository you push - to will have these two branches, and your local 'maint' and - 'master' will be pushed there). -+ -To use this mode effectively, you have to make sure _all_ the -branches you would push out are ready to be pushed out before -running 'git push', as the whole point of this mode is to allow you -to push all of the branches in one go. If you usually finish work -on only one branch and push out the result, while other branches are -unfinished, this mode is not for you. Also this mode is not -suitable for pushing into a shared central repository, as other -people may add new branches there, or update the tip of existing -branches outside your control. -+ -This used to be the default, but not since Git 2.0 (`simple` is the -new default). - --- +* `2` - link:technical/protocol-v2.html[wire protocol version 2]. -push.followTags:: - If set to true enable `--follow-tags` option by default. You - may override this configuration at time of push by specifying - `--no-follow-tags`. - -push.gpgSign:: - May be set to a boolean value, or the string 'if-asked'. A true - value causes all pushes to be GPG signed, as if `--signed` is - passed to linkgit:git-push[1]. The string 'if-asked' causes - pushes to be signed if the server supports it, as if - `--signed=if-asked` is passed to 'git push'. A false value may - override a value from a lower-priority config file. An explicit - command-line flag always overrides this config option. - -push.pushOption:: - When no `--push-option=<option>` argument is given from the - command line, `git push` behaves as if each <value> of - this variable is given as `--push-option=<value>`. -+ -This is a multi-valued variable, and an empty value can be used in a -higher priority configuration file (e.g. `.git/config` in a -repository) to clear the values inherited from a lower priority -configuration files (e.g. `$HOME/.gitconfig`). -+ -- -Example: +include::pull-config.txt[] -/etc/gitconfig - push.pushoption = a - push.pushoption = b - -~/.gitconfig - push.pushoption = c - -repo/.git/config - push.pushoption = - push.pushoption = b - -This will result in only b (a and c are cleared). - --- - -push.recurseSubmodules:: - Make sure all submodule commits used by the revisions to be pushed - are available on a remote-tracking branch. If the value is 'check' - then Git will verify that all submodule commits that changed in the - revisions to be pushed are available on at least one remote of the - submodule. If any commits are missing, the push will be aborted and - exit with non-zero status. If the value is 'on-demand' then all - submodules that changed in the revisions to be pushed will be - pushed. If on-demand was not able to push all necessary revisions - it will also be aborted and exit with non-zero status. If the value - is 'no' then default behavior of ignoring submodules when pushing - is retained. You may override this configuration at time of push by - specifying '--recurse-submodules=check|on-demand|no'. +include::push-config.txt[] include::rebase-config.txt[] -receive.advertiseAtomic:: - By default, git-receive-pack will advertise the atomic push - capability to its clients. If you don't want to advertise this - capability, set this variable to false. - -receive.advertisePushOptions:: - When set to true, git-receive-pack will advertise the push options - capability to its clients. False by default. - -receive.autogc:: - By default, git-receive-pack will run "git-gc --auto" after - receiving data from git-push and updating refs. You can stop - it by setting this variable to false. - -receive.certNonceSeed:: - By setting this variable to a string, `git receive-pack` - will accept a `git push --signed` and verifies it by using - a "nonce" protected by HMAC using this string as a secret - key. - -receive.certNonceSlop:: - When a `git push --signed` sent a push certificate with a - "nonce" that was issued by a receive-pack serving the same - repository within this many seconds, export the "nonce" - found in the certificate to `GIT_PUSH_CERT_NONCE` to the - hooks (instead of what the receive-pack asked the sending - side to include). This may allow writing checks in - `pre-receive` and `post-receive` a bit easier. Instead of - checking `GIT_PUSH_CERT_NONCE_SLOP` environment variable - that records by how many seconds the nonce is stale to - decide if they want to accept the certificate, they only - can check `GIT_PUSH_CERT_NONCE_STATUS` is `OK`. - -receive.fsckObjects:: - If it is set to true, git-receive-pack will check all received - objects. See `transfer.fsckObjects` for what's checked. - Defaults to false. If not set, the value of - `transfer.fsckObjects` is used instead. - -receive.fsck.<msg-id>:: - Acts like `fsck.<msg-id>`, but is used by - linkgit:git-receive-pack[1] instead of - linkgit:git-fsck[1]. See the `fsck.<msg-id>` documentation for - details. - -receive.fsck.skipList:: - Acts like `fsck.skipList`, but is used by - linkgit:git-receive-pack[1] instead of - linkgit:git-fsck[1]. See the `fsck.skipList` documentation for - details. - -receive.keepAlive:: - After receiving the pack from the client, `receive-pack` may - produce no output (if `--quiet` was specified) while processing - the pack, causing some networks to drop the TCP connection. - With this option set, if `receive-pack` does not transmit - any data in this phase for `receive.keepAlive` seconds, it will - send a short keepalive packet. The default is 5 seconds; set - to 0 to disable keepalives entirely. - -receive.unpackLimit:: - If the number of objects received in a push is below this - limit then the objects will be unpacked into loose object - files. However if the number of received objects equals or - exceeds this limit then the received pack will be stored as - a pack, after adding any missing delta bases. Storing the - pack from a push can make the push operation complete faster, - especially on slow filesystems. If not set, the value of - `transfer.unpackLimit` is used instead. - -receive.maxInputSize:: - If the size of the incoming pack stream is larger than this - limit, then git-receive-pack will error out, instead of - accepting the pack file. If not set or set to 0, then the size - is unlimited. - -receive.denyDeletes:: - If set to true, git-receive-pack will deny a ref update that deletes - the ref. Use this to prevent such a ref deletion via a push. - -receive.denyDeleteCurrent:: - If set to true, git-receive-pack will deny a ref update that - deletes the currently checked out branch of a non-bare repository. - -receive.denyCurrentBranch:: - If set to true or "refuse", git-receive-pack will deny a ref update - to the currently checked out branch of a non-bare repository. - Such a push is potentially dangerous because it brings the HEAD - out of sync with the index and working tree. If set to "warn", - print a warning of such a push to stderr, but allow the push to - proceed. If set to false or "ignore", allow such pushes with no - message. Defaults to "refuse". -+ -Another option is "updateInstead" which will update the working -tree if pushing into the current branch. This option is -intended for synchronizing working directories when one side is not easily -accessible via interactive ssh (e.g. a live web site, hence the requirement -that the working directory be clean). This mode also comes in handy when -developing inside a VM to test and fix code on different Operating Systems. -+ -By default, "updateInstead" will refuse the push if the working tree or -the index have any difference from the HEAD, but the `push-to-checkout` -hook can be used to customize this. See linkgit:githooks[5]. - -receive.denyNonFastForwards:: - If set to true, git-receive-pack will deny a ref update which is - not a fast-forward. Use this to prevent such an update via a push, - even if that push is forced. This configuration variable is - set when initializing a shared repository. - -receive.hideRefs:: - This variable is the same as `transfer.hideRefs`, but applies - only to `receive-pack` (and so affects pushes, but not fetches). - An attempt to update or delete a hidden ref by `git push` is - rejected. - -receive.updateServerInfo:: - If set to true, git-receive-pack will run git-update-server-info - after receiving data from git-push and updating refs. - -receive.shallowUpdate:: - If set to true, .git/shallow can be updated when new refs - require new shallow roots. Otherwise those refs are rejected. +include::receive-config.txt[] remote.pushDefault:: The remote to push to by default. Overrides @@ -3205,6 +2702,10 @@ repack.packKeptObjects:: index is being written (either via `--write-bitmap-index` or `repack.writeBitmaps`). +repack.useDeltaIslands:: + If set to true, makes `git repack` act as if `--delta-islands` + was passed. Defaults to `false`. + repack.writeBitmaps:: When true, git will write a bitmap index when packing all objects to disk (e.g., when `git repack -a` is run). This @@ -3227,71 +2728,15 @@ rerere.enabled:: `$GIT_DIR`, e.g. if "rerere" was previously used in the repository. -sendemail.identity:: - A configuration identity. When given, causes values in the - 'sendemail.<identity>' subsection to take precedence over - values in the 'sendemail' section. The default identity is - the value of `sendemail.identity`. - -sendemail.smtpEncryption:: - See linkgit:git-send-email[1] for description. Note that this - setting is not subject to the 'identity' mechanism. - -sendemail.smtpssl (deprecated):: - Deprecated alias for 'sendemail.smtpEncryption = ssl'. - -sendemail.smtpsslcertpath:: - Path to ca-certificates (either a directory or a single file). - Set it to an empty string to disable certificate verification. - -sendemail.<identity>.*:: - Identity-specific versions of the 'sendemail.*' parameters - found below, taking precedence over those when this - identity is selected, through either the command-line or - `sendemail.identity`. - -sendemail.aliasesFile:: -sendemail.aliasFileType:: -sendemail.annotate:: -sendemail.bcc:: -sendemail.cc:: -sendemail.ccCmd:: -sendemail.chainReplyTo:: -sendemail.confirm:: -sendemail.envelopeSender:: -sendemail.from:: -sendemail.multiEdit:: -sendemail.signedoffbycc:: -sendemail.smtpPass:: -sendemail.suppresscc:: -sendemail.suppressFrom:: -sendemail.to:: -sendemail.tocmd:: -sendemail.smtpDomain:: -sendemail.smtpServer:: -sendemail.smtpServerPort:: -sendemail.smtpServerOption:: -sendemail.smtpUser:: -sendemail.thread:: -sendemail.transferEncoding:: -sendemail.validate:: -sendemail.xmailer:: - See linkgit:git-send-email[1] for description. - -sendemail.signedoffcc (deprecated):: - Deprecated alias for `sendemail.signedoffbycc`. - -sendemail.smtpBatchSize:: - Number of messages to be sent per connection, after that a relogin - will happen. If the value is 0 or undefined, send all messages in - one connection. - See also the `--batch-size` option of linkgit:git-send-email[1]. - -sendemail.smtpReloginDelay:: - Seconds wait before reconnecting to smtp server. - See also the `--relogin-delay` option of linkgit:git-send-email[1]. - -showbranch.default:: +include::sendemail-config.txt[] + +sequence.editor:: + Text editor used by `git rebase -i` for editing the rebase instruction file. + The value is meant to be interpreted by the shell when it is used. + It can be overridden by the `GIT_SEQUENCE_EDITOR` environment variable. + When not configured the default commit message editor is used instead. + +showBranch.default:: The default set of branches for linkgit:git-show-branch[1]. See linkgit:git-show-branch[1]. @@ -3403,88 +2848,7 @@ stash.showStat:: option will show diffstat of the stash entry. Defaults to true. See description of 'show' command in linkgit:git-stash[1]. -submodule.<name>.url:: - The URL for a submodule. This variable is copied from the .gitmodules - file to the git config via 'git submodule init'. The user can change - the configured URL before obtaining the submodule via 'git submodule - update'. If neither submodule.<name>.active or submodule.active are - set, the presence of this variable is used as a fallback to indicate - whether the submodule is of interest to git commands. - See linkgit:git-submodule[1] and linkgit:gitmodules[5] for details. - -submodule.<name>.update:: - The method by which a submodule is updated by 'git submodule update', - which is the only affected command, others such as - 'git checkout --recurse-submodules' are unaffected. It exists for - historical reasons, when 'git submodule' was the only command to - interact with submodules; settings like `submodule.active` - and `pull.rebase` are more specific. It is populated by - `git submodule init` from the linkgit:gitmodules[5] file. - See description of 'update' command in linkgit:git-submodule[1]. - -submodule.<name>.branch:: - The remote branch name for a submodule, used by `git submodule - update --remote`. Set this option to override the value found in - the `.gitmodules` file. See linkgit:git-submodule[1] and - linkgit:gitmodules[5] for details. - -submodule.<name>.fetchRecurseSubmodules:: - This option can be used to control recursive fetching of this - submodule. It can be overridden by using the --[no-]recurse-submodules - command-line option to "git fetch" and "git pull". - This setting will override that from in the linkgit:gitmodules[5] - file. - -submodule.<name>.ignore:: - Defines under what circumstances "git status" and the diff family show - a submodule as modified. When set to "all", it will never be considered - modified (but it will nonetheless show up in the output of status and - commit when it has been staged), "dirty" will ignore all changes - to the submodules work tree and - takes only differences between the HEAD of the submodule and the commit - recorded in the superproject into account. "untracked" will additionally - let submodules with modified tracked files in their work tree show up. - Using "none" (the default when this option is not set) also shows - submodules that have untracked files in their work tree as changed. - This setting overrides any setting made in .gitmodules for this submodule, - both settings can be overridden on the command line by using the - "--ignore-submodules" option. The 'git submodule' commands are not - affected by this setting. - -submodule.<name>.active:: - Boolean value indicating if the submodule is of interest to git - commands. This config option takes precedence over the - submodule.active config option. See linkgit:gitsubmodules[7] for - details. - -submodule.active:: - A repeated field which contains a pathspec used to match against a - submodule's path to determine if the submodule is of interest to git - commands. See linkgit:gitsubmodules[7] for details. - -submodule.recurse:: - Specifies if commands recurse into submodules by default. This - applies to all commands that have a `--recurse-submodules` option, - except `clone`. - Defaults to false. - -submodule.fetchJobs:: - Specifies how many submodules are fetched/cloned at the same time. - A positive integer allows up to that number of submodules fetched - in parallel. A value of 0 will give some reasonable default. - If unset, it defaults to 1. - -submodule.alternateLocation:: - Specifies how the submodules obtain alternates when submodules are - cloned. Possible values are `no`, `superproject`. - By default `no` is assumed, which doesn't add references. When the - value is set to `superproject` the submodule to be cloned computes - its alternates location relative to the superprojects alternate. - -submodule.alternateErrorStrategy:: - Specifies how to treat errors with the alternates for a submodule - as computed via `submodule.alternateLocation`. Possible values are - `ignore`, `info`, `die`. Default is `die`. +include::submodule-config.txt[] tag.forceSignAnnotated:: A boolean to specify whether annotated tags created should be GPG signed. @@ -3632,15 +2996,15 @@ uploadpack.packObjectsHook:: was run. I.e., `upload-pack` will feed input intended for `pack-objects` to the hook, and expects a completed packfile on stdout. - -uploadpack.allowFilter:: - If this option is set, `upload-pack` will support partial - clone and partial fetch object filtering. + Note that this configuration variable is ignored if it is seen in the repository-level config (this is a safety measure against fetching from untrusted repositories). +uploadpack.allowFilter:: + If this option is set, `upload-pack` will support partial + clone and partial fetch object filtering. + uploadpack.allowRefInWant:: If this option is set, `upload-pack` will support the `ref-in-want` feature of the protocol version 2 `fetch` command. This feature diff --git a/Documentation/doc-diff b/Documentation/doc-diff index f483fe427c..dfd9418778 100755 --- a/Documentation/doc-diff +++ b/Documentation/doc-diff @@ -1,21 +1,34 @@ #!/bin/sh +# +# Build two documentation trees and diff the resulting formatted output. +# Compared to a source diff, this can reveal mistakes in the formatting. +# For example: +# +# ./doc-diff origin/master HEAD +# +# would show the differences introduced by a branch based on master. OPTIONS_SPEC="\ doc-diff [options] <from> <to> [-- <diff-options>] +doc-diff (-c|--clean) -- j=n parallel argument to pass to make f force rebuild; do not rely on cached results +c,clean cleanup temporary working files " SUBDIRECTORY_OK=1 . "$(git --exec-path)/git-sh-setup" parallel= force= +clean= while test $# -gt 0 do case "$1" in -j) parallel=$2; shift ;; + -c|--clean) + clean=t ;; -f) force=t ;; --) @@ -26,6 +39,17 @@ do shift done +cd_to_toplevel +tmp=Documentation/tmp-doc-diff + +if test -n "$clean" +then + test $# -eq 0 || usage + git worktree remove --force "$tmp/worktree" 2>/dev/null + rm -rf "$tmp" + exit 0 +fi + if test -z "$parallel" then parallel=$(getconf _NPROCESSORS_ONLN 2>/dev/null) @@ -42,9 +66,6 @@ to=$1; shift from_oid=$(git rev-parse --verify "$from") || exit 1 to_oid=$(git rev-parse --verify "$to") || exit 1 -cd_to_toplevel -tmp=Documentation/tmp-doc-diff - if test -n "$force" then rm -rf "$tmp" @@ -54,7 +75,7 @@ fi # results that don't differ between the two trees. if ! test -d "$tmp/worktree" then - git worktree add --detach "$tmp/worktree" "$from" && + git worktree add -f --detach "$tmp/worktree" "$from" && dots=$(echo "$tmp/worktree" | sed 's#[^/]*#..#g') && ln -s "$dots/config.mak" "$tmp/worktree/config.mak" fi @@ -69,12 +90,12 @@ generate_render_makefile () { printf '%s: %s\n' "$dst" "$src" printf '\t@echo >&2 " RENDER $(notdir $@)" && \\\n' printf '\tmkdir -p $(dir $@) && \\\n' - printf '\tMANWIDTH=80 man -l $< >$@+ && \\\n' + printf '\tMANWIDTH=80 man $< >$@+ && \\\n' printf '\tmv $@+ $@\n' done } -# render_tree <dirname> <committish> +# render_tree <committish_oid> render_tree () { # Skip install-man entirely if we already have an installed directory. # We can't rely on make here, since "install-man" unconditionally @@ -84,7 +105,7 @@ render_tree () { # through. if ! test -d "$tmp/installed/$1" then - git -C "$tmp/worktree" checkout "$2" && + git -C "$tmp/worktree" checkout --detach "$1" && make -j$parallel -C "$tmp/worktree" \ GIT_VERSION=omitted \ SOURCE_DATE_EPOCH=0 \ @@ -104,6 +125,6 @@ render_tree () { fi } -render_tree $from_oid "$from" && -render_tree $to_oid "$to" && +render_tree $from_oid && +render_tree $to_oid && git -C $tmp/rendered diff --no-index "$@" $from_oid $to_oid diff --git a/Documentation/fetch-config.txt b/Documentation/fetch-config.txt new file mode 100644 index 0000000000..cbfad6cdbb --- /dev/null +++ b/Documentation/fetch-config.txt @@ -0,0 +1,65 @@ +fetch.recurseSubmodules:: + This option can be either set to a boolean value or to 'on-demand'. + Setting it to a boolean changes the behavior of fetch and pull to + unconditionally recurse into submodules when set to true or to not + recurse at all when set to false. When set to 'on-demand' (the default + value), fetch and pull will only recurse into a populated submodule + when its superproject retrieves a commit that updates the submodule's + reference. + +fetch.fsckObjects:: + If it is set to true, git-fetch-pack will check all fetched + objects. See `transfer.fsckObjects` for what's + checked. Defaults to false. If not set, the value of + `transfer.fsckObjects` is used instead. + +fetch.fsck.<msg-id>:: + Acts like `fsck.<msg-id>`, but is used by + linkgit:git-fetch-pack[1] instead of linkgit:git-fsck[1]. See + the `fsck.<msg-id>` documentation for details. + +fetch.fsck.skipList:: + Acts like `fsck.skipList`, but is used by + linkgit:git-fetch-pack[1] instead of linkgit:git-fsck[1]. See + the `fsck.skipList` documentation for details. + +fetch.unpackLimit:: + If the number of objects fetched over the Git native + transfer is below this + limit, then the objects will be unpacked into loose object + files. However if the number of received objects equals or + exceeds this limit then the received pack will be stored as + a pack, after adding any missing delta bases. Storing the + pack from a push can make the push operation complete faster, + especially on slow filesystems. If not set, the value of + `transfer.unpackLimit` is used instead. + +fetch.prune:: + If true, fetch will automatically behave as if the `--prune` + option was given on the command line. See also `remote.<name>.prune` + and the PRUNING section of linkgit:git-fetch[1]. + +fetch.pruneTags:: + If true, fetch will automatically behave as if the + `refs/tags/*:refs/tags/*` refspec was provided when pruning, + if not set already. This allows for setting both this option + and `fetch.prune` to maintain a 1=1 mapping to upstream + refs. See also `remote.<name>.pruneTags` and the PRUNING + section of linkgit:git-fetch[1]. + +fetch.output:: + Control how ref update status is printed. Valid values are + `full` and `compact`. Default value is `full`. See section + OUTPUT in linkgit:git-fetch[1] for detail. + +fetch.negotiationAlgorithm:: + Control how information about the commits in the local repository is + sent when negotiating the contents of the packfile to be sent by the + server. Set to "skipping" to use an algorithm that skips commits in an + effort to converge faster, but may result in a larger-than-necessary + packfile; The default is "default" which instructs Git to use the default algorithm + that never skips commits (unless the server has acknowledged it or one + of its descendants). + Unknown values will cause 'git fetch' to error out. ++ +See also the `--negotiation-tip` option for linkgit:git-fetch[1]. diff --git a/Documentation/fetch-options.txt b/Documentation/fetch-options.txt index 8bc36af4b1..fa0a3151b3 100644 --- a/Documentation/fetch-options.txt +++ b/Documentation/fetch-options.txt @@ -68,11 +68,16 @@ endif::git-pull[] -f:: --force:: - When 'git fetch' is used with `<rbranch>:<lbranch>` - refspec, it refuses to update the local branch - `<lbranch>` unless the remote branch `<rbranch>` it - fetches is a descendant of `<lbranch>`. This option - overrides that check. + When 'git fetch' is used with `<src>:<dst>` refspec it may + refuse to update the local branch as discussed +ifdef::git-pull[] + in the `<refspec>` part of the linkgit:git-fetch[1] + documentation. +endif::git-pull[] +ifndef::git-pull[] + in the `<refspec>` part below. +endif::git-pull[] + This option overrides that check. -k:: --keep:: diff --git a/Documentation/format-config.txt b/Documentation/format-config.txt new file mode 100644 index 0000000000..dc77941c48 --- /dev/null +++ b/Documentation/format-config.txt @@ -0,0 +1,87 @@ +format.attach:: + Enable multipart/mixed attachments as the default for + 'format-patch'. The value can also be a double quoted string + which will enable attachments as the default and set the + value as the boundary. See the --attach option in + linkgit:git-format-patch[1]. + +format.from:: + Provides the default value for the `--from` option to format-patch. + Accepts a boolean value, or a name and email address. If false, + format-patch defaults to `--no-from`, using commit authors directly in + the "From:" field of patch mails. If true, format-patch defaults to + `--from`, using your committer identity in the "From:" field of patch + mails and including a "From:" field in the body of the patch mail if + different. If set to a non-boolean value, format-patch uses that + value instead of your committer identity. Defaults to false. + +format.numbered:: + A boolean which can enable or disable sequence numbers in patch + subjects. It defaults to "auto" which enables it only if there + is more than one patch. It can be enabled or disabled for all + messages by setting it to "true" or "false". See --numbered + option in linkgit:git-format-patch[1]. + +format.headers:: + Additional email headers to include in a patch to be submitted + by mail. See linkgit:git-format-patch[1]. + +format.to:: +format.cc:: + Additional recipients to include in a patch to be submitted + by mail. See the --to and --cc options in + linkgit:git-format-patch[1]. + +format.subjectPrefix:: + The default for format-patch is to output files with the '[PATCH]' + subject prefix. Use this variable to change that prefix. + +format.signature:: + The default for format-patch is to output a signature containing + the Git version number. Use this variable to change that default. + Set this variable to the empty string ("") to suppress + signature generation. + +format.signatureFile:: + Works just like format.signature except the contents of the + file specified by this variable will be used as the signature. + +format.suffix:: + The default for format-patch is to output files with the suffix + `.patch`. Use this variable to change that suffix (make sure to + include the dot if you want it). + +format.pretty:: + The default pretty format for log/show/whatchanged command, + See linkgit:git-log[1], linkgit:git-show[1], + linkgit:git-whatchanged[1]. + +format.thread:: + The default threading style for 'git format-patch'. Can be + a boolean value, or `shallow` or `deep`. `shallow` threading + makes every mail a reply to the head of the series, + where the head is chosen from the cover letter, the + `--in-reply-to`, and the first patch mail, in this order. + `deep` threading makes every mail a reply to the previous one. + A true boolean value is the same as `shallow`, and a false + value disables threading. + +format.signOff:: + A boolean value which lets you enable the `-s/--signoff` option of + format-patch by default. *Note:* Adding the Signed-off-by: line to a + patch should be a conscious act and means that you certify you have + the rights to submit this work under the same open source license. + Please see the 'SubmittingPatches' document for further discussion. + +format.coverLetter:: + A boolean that controls whether to generate a cover-letter when + format-patch is invoked, but in addition can be set to "auto", to + generate a cover-letter only when there's more than one patch. + +format.outputDirectory:: + Set a custom directory to store the resulting files instead of the + current working directory. + +format.useAutoBase:: + A boolean value which lets you enable the `--base=auto` option of + format-patch by default. diff --git a/Documentation/git-archimport.txt b/Documentation/git-archimport.txt index ea70653369..a595a0ffee 100644 --- a/Documentation/git-archimport.txt +++ b/Documentation/git-archimport.txt @@ -3,7 +3,7 @@ git-archimport(1) NAME ---- -git-archimport - Import an Arch repository into Git +git-archimport - Import a GNU Arch repository into Git SYNOPSIS @@ -14,7 +14,8 @@ SYNOPSIS DESCRIPTION ----------- -Imports a project from one or more Arch repositories. It will follow branches +Imports a project from one or more GNU Arch repositories. +It will follow branches and repositories within the namespaces defined by the <archive/branch> parameters supplied. If it cannot find the remote branch a merge comes from it will just import it as a regular commit. If it can find it, it will mark it diff --git a/Documentation/git-branch.txt b/Documentation/git-branch.txt index 9767b2b483..bf5316ffa9 100644 --- a/Documentation/git-branch.txt +++ b/Documentation/git-branch.txt @@ -14,7 +14,7 @@ SYNOPSIS [(--merged | --no-merged) [<commit>]] [--contains [<commit]] [--no-contains [<commit>]] [--points-at <object>] [--format=<format>] [<pattern>...] -'git branch' [--track | --no-track] [-l] [-f] <branchname> [<start-point>] +'git branch' [--track | --no-track] [-f] <branchname> [<start-point>] 'git branch' (--set-upstream-to=<upstream> | -u <upstream>) [<branchname>] 'git branch' --unset-upstream [<branchname>] 'git branch' (-m | -M) [<oldbranch>] <newbranch> @@ -100,8 +100,6 @@ OPTIONS The negated form `--no-create-reflog` only overrides an earlier `--create-reflog`, but currently does not negate the setting of `core.logAllRefUpdates`. -+ -The `-l` option is a deprecated synonym for `--create-reflog`. -f:: --force:: @@ -156,14 +154,11 @@ This option is only applicable in non-verbose mode. --all:: List both remote-tracking branches and local branches. +-l:: --list:: List branches. With optional `<pattern>...`, e.g. `git branch --list 'maint-*'`, list only the branches that match the pattern(s). -+ -This should not be confused with `git branch -l <branchname>`, -which creates a branch named `<branchname>` with a reflog. -See `--create-reflog` above for details. -v:: -vv:: diff --git a/Documentation/git-column.txt b/Documentation/git-column.txt index 03d18465d4..763afabb6d 100644 --- a/Documentation/git-column.txt +++ b/Documentation/git-column.txt @@ -13,7 +13,10 @@ SYNOPSIS DESCRIPTION ----------- -This command formats its input into multiple columns. +This command formats the lines of its standard input into a table with +multiple columns. Each input line occupies one cell of the table. It +is used internally by other git commands to format output into +columns. OPTIONS ------- @@ -23,7 +26,7 @@ OPTIONS --mode=<mode>:: Specify layout mode. See configuration variable column.ui for option - syntax. + syntax in linkgit:git-config[1]. --raw-mode=<n>:: Same as --mode but take mode encoded as a number. This is mainly used @@ -43,6 +46,34 @@ OPTIONS --padding=<N>:: The number of spaces between columns. One space by default. +EXAMPLES +------ + +Format data by columns: +------------ +$ seq 1 24 | git column --mode=column --padding=5 +1 4 7 10 13 16 19 22 +2 5 8 11 14 17 20 23 +3 6 9 12 15 18 21 24 +------------ + +Format data by rows: +------------ +$ seq 1 21 | git column --mode=row --padding=5 +1 2 3 4 5 6 7 +8 9 10 11 12 13 14 +15 16 17 18 19 20 21 +------------ + +List some tags in a table with unequal column widths: +------------ +$ git tag --list 'v2.4.*' --column=row,dense +v2.4.0 v2.4.0-rc0 v2.4.0-rc1 v2.4.0-rc2 v2.4.0-rc3 +v2.4.1 v2.4.10 v2.4.11 v2.4.12 v2.4.2 +v2.4.3 v2.4.4 v2.4.5 v2.4.6 v2.4.7 +v2.4.8 v2.4.9 +------------ + GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-commit-graph.txt b/Documentation/git-commit-graph.txt index dececb79d7..624470e198 100644 --- a/Documentation/git-commit-graph.txt +++ b/Documentation/git-commit-graph.txt @@ -3,7 +3,7 @@ git-commit-graph(1) NAME ---- -git-commit-graph - Write and verify Git commit graph files +git-commit-graph - Write and verify Git commit-graph files SYNOPSIS @@ -17,24 +17,24 @@ SYNOPSIS DESCRIPTION ----------- -Manage the serialized commit graph file. +Manage the serialized commit-graph file. OPTIONS ------- --object-dir:: - Use given directory for the location of packfiles and commit graph + Use given directory for the location of packfiles and commit-graph file. This parameter exists to specify the location of an alternate - that only has the objects directory, not a full .git directory. The - commit graph file is expected to be at <dir>/info/commit-graph and - the packfiles are expected to be in <dir>/pack. + that only has the objects directory, not a full `.git` directory. The + commit-graph file is expected to be at `<dir>/info/commit-graph` and + the packfiles are expected to be in `<dir>/pack`. COMMANDS -------- 'write':: -Write a commit graph file based on the commits found in packfiles. +Write a commit-graph file based on the commits found in packfiles. + With the `--stdin-packs` option, generate the new commit graph by walking objects only in the specified pack-indexes. (Cannot be combined @@ -54,8 +54,8 @@ existing commit-graph file. 'read':: -Read a graph file given by the commit-graph file and output basic -details about the graph file. Used for debugging purposes. +Read the commit-graph file and output basic details about it. +Used for debugging purposes. 'verify':: @@ -66,27 +66,28 @@ database. Used to check for corrupted data. EXAMPLES -------- -* Write a commit graph file for the packed commits in your local .git folder. +* Write a commit-graph file for the packed commits in your local `.git` + directory. + ------------------------------------------------ $ git commit-graph write ------------------------------------------------ -* Write a graph file, extending the current graph file using commits -* in <pack-index>. +* Write a commit-graph file, extending the current commit-graph file + using commits in `<pack-index>`. + ------------------------------------------------ $ echo <pack-index> | git commit-graph write --stdin-packs ------------------------------------------------ -* Write a graph file containing all reachable commits. +* Write a commit-graph file containing all reachable commits. + ------------------------------------------------ $ git show-ref -s | git commit-graph write --stdin-commits ------------------------------------------------ -* Write a graph file containing all commits in the current -* commit-graph file along with those reachable from HEAD. +* Write a commit-graph file containing all commits in the current + commit-graph file along with those reachable from `HEAD`. + ------------------------------------------------ $ git rev-parse HEAD | git commit-graph write --stdin-commits --append diff --git a/Documentation/git-config.txt b/Documentation/git-config.txt index 8e240435be..5e87d82933 100644 --- a/Documentation/git-config.txt +++ b/Documentation/git-config.txt @@ -188,8 +188,8 @@ Valid `<type>`'s include: --bool-or-int:: --path:: --expiry-date:: - Historical options for selecting a type specifier. Prefer instead `--type`, - (see: above). + Historical options for selecting a type specifier. Prefer instead `--type` + (see above). --no-type:: Un-sets the previously set type specifier (if one was previously set). This @@ -442,9 +442,9 @@ For URLs in `https://weak.example.com`, `http.sslVerify` is set to false, while it is set to `true` for all others: ------------ -% git config --bool --get-urlmatch http.sslverify https://good.example.com +% git config --type=bool --get-urlmatch http.sslverify https://good.example.com true -% git config --bool --get-urlmatch http.sslverify https://weak.example.com +% git config --type=bool --get-urlmatch http.sslverify https://weak.example.com false % git config --get-urlmatch http https://weak.example.com http.cookieFile /tmp/cookie.txt diff --git a/Documentation/git-describe.txt b/Documentation/git-describe.txt index e027fb8c4b..ccdc5f83d6 100644 --- a/Documentation/git-describe.txt +++ b/Documentation/git-describe.txt @@ -18,7 +18,9 @@ The command finds the most recent tag that is reachable from a commit. If the tag points to the commit, then only the tag is shown. Otherwise, it suffixes the tag name with the number of additional commits on top of the tagged object and the -abbreviated object name of the most recent commit. +abbreviated object name of the most recent commit. The result +is a "human-readable" object name which can also be used to +identify the commit to other git commands. By default (without --all or --tags) `git describe` only shows annotated tags. For more information about creating annotated tags diff --git a/Documentation/git-format-patch.txt b/Documentation/git-format-patch.txt index b41e1329a7..aba4c5febe 100644 --- a/Documentation/git-format-patch.txt +++ b/Documentation/git-format-patch.txt @@ -23,6 +23,8 @@ SYNOPSIS [(--reroll-count|-v) <n>] [--to=<email>] [--cc=<email>] [--[no-]cover-letter] [--quiet] [--notes[=<ref>]] + [--interdiff=<previous>] + [--range-diff=<previous> [--creation-factor=<percent>]] [--progress] [<common diff options>] [ <since> | <revision range> ] @@ -228,6 +230,33 @@ feeding the result to `git send-email`. containing the branch description, shortlog and the overall diffstat. You can fill in a description in the file before sending it out. +--interdiff=<previous>:: + As a reviewer aid, insert an interdiff into the cover letter, + or as commentary of the lone patch of a 1-patch series, showing + the differences between the previous version of the patch series and + the series currently being formatted. `previous` is a single revision + naming the tip of the previous series which shares a common base with + the series being formatted (for example `git format-patch + --cover-letter --interdiff=feature/v1 -3 feature/v2`). + +--range-diff=<previous>:: + As a reviewer aid, insert a range-diff (see linkgit:git-range-diff[1]) + into the cover letter, or as commentary of the lone patch of a + 1-patch series, showing the differences between the previous + version of the patch series and the series currently being formatted. + `previous` can be a single revision naming the tip of the previous + series if it shares a common base with the series being formatted (for + example `git format-patch --cover-letter --range-diff=feature/v1 -3 + feature/v2`), or a revision range if the two versions of the series are + disjoint (for example `git format-patch --cover-letter + --range-diff=feature/v1~3..feature/v1 -3 feature/v2`). + +--creation-factor=<percent>:: + Used with `--range-diff`, tweak the heuristic which matches up commits + between the previous and current series of patches by adjusting the + creation/deletion cost fudge factor. See linkgit:git-range-diff[1]) + for details. + --notes[=<ref>]:: Append the notes (see linkgit:git-notes[1]) for the commit after the three-dash line. diff --git a/Documentation/git-interpret-trailers.txt b/Documentation/git-interpret-trailers.txt index b8fafb1e8b..a5e8b36f62 100644 --- a/Documentation/git-interpret-trailers.txt +++ b/Documentation/git-interpret-trailers.txt @@ -56,8 +56,9 @@ least one Git-generated or user-configured trailer and consists of at least 25% trailers. The group must be preceded by one or more empty (or whitespace-only) lines. The group must either be at the end of the message or be the last -non-whitespace lines before a line that starts with '---'. Such three -minus signs start the patch part of the message. +non-whitespace lines before a line that starts with '---' (followed by a +space or the end of the line). Such three minus signs start the patch +part of the message. See also `--no-divider` below. When reading trailers, there can be whitespaces after the token, the separator and the value. There can also be whitespaces @@ -125,6 +126,11 @@ OPTIONS A convenience alias for `--only-trailers --only-input --unfold`. +--no-divider:: + Do not treat `---` as the end of the commit message. Use this + when you know your input contains just the commit message itself + (and not an email or the output of `git format-patch`). + CONFIGURATION VARIABLES ----------------------- diff --git a/Documentation/git-multi-pack-index.txt b/Documentation/git-multi-pack-index.txt new file mode 100644 index 0000000000..f7778a2c85 --- /dev/null +++ b/Documentation/git-multi-pack-index.txt @@ -0,0 +1,66 @@ +git-multi-pack-index(1) +======================= + +NAME +---- +git-multi-pack-index - Write and verify multi-pack-indexes + + +SYNOPSIS +-------- +[verse] +'git multi-pack-index' [--object-dir=<dir>] <verb> + +DESCRIPTION +----------- +Write or verify a multi-pack-index (MIDX) file. + +OPTIONS +------- + +--object-dir=<dir>:: + Use given directory for the location of Git objects. We check + `<dir>/packs/multi-pack-index` for the current MIDX file, and + `<dir>/packs` for the pack-files to index. + +write:: + When given as the verb, write a new MIDX file to + `<dir>/packs/multi-pack-index`. + +verify:: + When given as the verb, verify the contents of the MIDX file + at `<dir>/packs/multi-pack-index`. + + +EXAMPLES +-------- + +* Write a MIDX file for the packfiles in the current .git folder. ++ +----------------------------------------------- +$ git multi-pack-index write +----------------------------------------------- + +* Write a MIDX file for the packfiles in an alternate object store. ++ +----------------------------------------------- +$ git multi-pack-index --object-dir <alt> write +----------------------------------------------- + +* Verify the MIDX file for the packfiles in the current .git folder. ++ +----------------------------------------------- +$ git multi-pack-index verify +----------------------------------------------- + + +SEE ALSO +-------- +See link:technical/multi-pack-index.html[The Multi-Pack-Index Design +Document] and link:technical/pack-format.html[The Multi-Pack-Index +Format] for more information on the multi-pack-index feature. + + +GIT +--- +Part of the linkgit:git[1] suite diff --git a/Documentation/git-pack-objects.txt b/Documentation/git-pack-objects.txt index d95b472d16..40c825c381 100644 --- a/Documentation/git-pack-objects.txt +++ b/Documentation/git-pack-objects.txt @@ -289,6 +289,103 @@ Unexpected missing object will raise an error. --unpack-unreachable:: Keep unreachable objects in loose form. This implies `--revs`. +--delta-islands:: + Restrict delta matches based on "islands". See DELTA ISLANDS + below. + + +DELTA ISLANDS +------------- + +When possible, `pack-objects` tries to reuse existing on-disk deltas to +avoid having to search for new ones on the fly. This is an important +optimization for serving fetches, because it means the server can avoid +inflating most objects at all and just send the bytes directly from +disk. This optimization can't work when an object is stored as a delta +against a base which the receiver does not have (and which we are not +already sending). In that case the server "breaks" the delta and has to +find a new one, which has a high CPU cost. Therefore it's important for +performance that the set of objects in on-disk delta relationships match +what a client would fetch. + +In a normal repository, this tends to work automatically. The objects +are mostly reachable from the branches and tags, and that's what clients +fetch. Any deltas we find on the server are likely to be between objects +the client has or will have. + +But in some repository setups, you may have several related but separate +groups of ref tips, with clients tending to fetch those groups +independently. For example, imagine that you are hosting several "forks" +of a repository in a single shared object store, and letting clients +view them as separate repositories through `GIT_NAMESPACE` or separate +repos using the alternates mechanism. A naive repack may find that the +optimal delta for an object is against a base that is only found in +another fork. But when a client fetches, they will not have the base +object, and we'll have to find a new delta on the fly. + +A similar situation may exist if you have many refs outside of +`refs/heads/` and `refs/tags/` that point to related objects (e.g., +`refs/pull` or `refs/changes` used by some hosting providers). By +default, clients fetch only heads and tags, and deltas against objects +found only in those other groups cannot be sent as-is. + +Delta islands solve this problem by allowing you to group your refs into +distinct "islands". Pack-objects computes which objects are reachable +from which islands, and refuses to make a delta from an object `A` +against a base which is not present in all of `A`'s islands. This +results in slightly larger packs (because we miss some delta +opportunities), but guarantees that a fetch of one island will not have +to recompute deltas on the fly due to crossing island boundaries. + +When repacking with delta islands the delta window tends to get +clogged with candidates that are forbidden by the config. Repacking +with a big --window helps (and doesn't take as long as it otherwise +might because we can reject some object pairs based on islands before +doing any computation on the content). + +Islands are configured via the `pack.island` option, which can be +specified multiple times. Each value is a left-anchored regular +expressions matching refnames. For example: + +------------------------------------------- +[pack] +island = refs/heads/ +island = refs/tags/ +------------------------------------------- + +puts heads and tags into an island (whose name is the empty string; see +below for more on naming). Any refs which do not match those regular +expressions (e.g., `refs/pull/123`) is not in any island. Any object +which is reachable only from `refs/pull/` (but not heads or tags) is +therefore not a candidate to be used as a base for `refs/heads/`. + +Refs are grouped into islands based on their "names", and two regexes +that produce the same name are considered to be in the same +island. The names are computed from the regexes by concatenating any +capture groups from the regex, with a '-' dash in between. (And if +there are no capture groups, then the name is the empty string, as in +the above example.) This allows you to create arbitrary numbers of +islands. Only up to 14 such capture groups are supported though. + +For example, imagine you store the refs for each fork in +`refs/virtual/ID`, where `ID` is a numeric identifier. You might then +configure: + +------------------------------------------- +[pack] +island = refs/virtual/([0-9]+)/heads/ +island = refs/virtual/([0-9]+)/tags/ +island = refs/virtual/([0-9]+)/(pull)/ +------------------------------------------- + +That puts the heads and tags for each fork in their own island (named +"1234" or similar), and the pull refs for each go into their own +"1234-pull". + +Note that we pick a single island for each regex to go into, using "last +one wins" ordering (which allows repo-specific config to take precedence +over user-wide config, and so forth). + SEE ALSO -------- linkgit:git-rev-list[1] diff --git a/Documentation/git-push.txt b/Documentation/git-push.txt index 55277a9781..a5fc54aeab 100644 --- a/Documentation/git-push.txt +++ b/Documentation/git-push.txt @@ -74,22 +74,57 @@ without any `<refspec>` on the command line. Otherwise, missing `:<dst>` means to update the same ref as the `<src>`. + The object referenced by <src> is used to update the <dst> reference -on the remote side. By default this is only allowed if <dst> is not -a tag (annotated or lightweight), and then only if it can fast-forward -<dst>. By having the optional leading `+`, you can tell Git to update -the <dst> ref even if it is not allowed by default (e.g., it is not a -fast-forward.) This does *not* attempt to merge <src> into <dst>. See -EXAMPLES below for details. -+ -`tag <tag>` means the same as `refs/tags/<tag>:refs/tags/<tag>`. -+ -Pushing an empty <src> allows you to delete the <dst> ref from -the remote repository. +on the remote side. Whether this is allowed depends on where in +`refs/*` the <dst> reference lives as described in detail below, in +those sections "update" means any modifications except deletes, which +as noted after the next few sections are treated differently. ++ +The `refs/heads/*` namespace will only accept commit objects, and +updates only if they can be fast-forwarded. ++ +The `refs/tags/*` namespace will accept any kind of object (as +commits, trees and blobs can be tagged), and any updates to them will +be rejected. ++ +It's possible to push any type of object to any namespace outside of +`refs/{tags,heads}/*`. In the case of tags and commits, these will be +treated as if they were the commits inside `refs/heads/*` for the +purposes of whether the update is allowed. ++ +I.e. a fast-forward of commits and tags outside `refs/{tags,heads}/*` +is allowed, even in cases where what's being fast-forwarded is not a +commit, but a tag object which happens to point to a new commit which +is a fast-forward of the commit the last tag (or commit) it's +replacing. Replacing a tag with an entirely different tag is also +allowed, if it points to the same commit, as well as pushing a peeled +tag, i.e. pushing the commit that existing tag object points to, or a +new tag object which an existing commit points to. ++ +Tree and blob objects outside of `refs/{tags,heads}/*` will be treated +the same way as if they were inside `refs/tags/*`, any update of them +will be rejected. ++ +All of the rules described above about what's not allowed as an update +can be overridden by adding an the optional leading `+` to a refspec +(or using `--force` command line option). The only exception to this +is that no amount of forcing will make the `refs/heads/*` namespace +accept a non-commit object. Hooks and configuration can also override +or amend these rules, see e.g. `receive.denyNonFastForwards` in +linkgit:git-config[1] and `pre-receive` and `update` in +linkgit:githooks[5]. ++ +Pushing an empty <src> allows you to delete the <dst> ref from the +remote repository. Deletions are always accepted without a leading `+` +in the refspec (or `--force`), except when forbidden by configuration +or hooks. See `receive.denyDeletes` in linkgit:git-config[1] and +`pre-receive` and `update` in linkgit:githooks[5]. + The special refspec `:` (or `+:` to allow non-fast-forward updates) directs Git to push "matching" branches: for every branch that exists on the local side, the remote side is updated if a branch of the same name already exists on the remote side. ++ +`tag <tag>` means the same as `refs/tags/<tag>:refs/tags/<tag>`. --all:: Push all branches (i.e. refs under `refs/heads/`); cannot be diff --git a/Documentation/git-repack.txt b/Documentation/git-repack.txt index d056250968..aa0cc8bd44 100644 --- a/Documentation/git-repack.txt +++ b/Documentation/git-repack.txt @@ -160,6 +160,11 @@ depth is 4095. being removed. In addition, any unreachable loose objects will be packed (and their loose counterparts removed). +-i:: +--delta-islands:: + Pass the `--delta-islands` option to `git-pack-objects`, see + linkgit:git-pack-objects[1]. + Configuration ------------- diff --git a/Documentation/git-rerere.txt b/Documentation/git-rerere.txt index 031f31fa47..df310d2a58 100644 --- a/Documentation/git-rerere.txt +++ b/Documentation/git-rerere.txt @@ -211,6 +211,12 @@ would conflict the same way as the test merge you resolved earlier. 'git rerere' will be run by 'git rebase' to help you resolve this conflict. +[NOTE] 'git rerere' relies on the conflict markers in the file to +detect the conflict. If the file already contains lines that look the +same as lines with conflict markers, 'git rerere' may fail to record a +conflict resolution. To work around this, the `conflict-marker-size` +setting in linkgit:gitattributes[5] can be used. + GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-update-ref.txt b/Documentation/git-update-ref.txt index bc8fdfd469..fda8516677 100644 --- a/Documentation/git-update-ref.txt +++ b/Documentation/git-update-ref.txt @@ -8,7 +8,7 @@ git-update-ref - Update the object name stored in a ref safely SYNOPSIS -------- [verse] -'git update-ref' [-m <reason>] (-d <ref> [<oldvalue>] | [--no-deref] [--create-reflog] <ref> <newvalue> [<oldvalue>] | --stdin [-z]) +'git update-ref' [-m <reason>] [--no-deref] (-d <ref> [<oldvalue>] | [--create-reflog] <ref> <newvalue> [<oldvalue>] | --stdin [-z]) DESCRIPTION ----------- diff --git a/Documentation/git-worktree.txt b/Documentation/git-worktree.txt index 29a5b7e252..e2ee9fc21b 100644 --- a/Documentation/git-worktree.txt +++ b/Documentation/git-worktree.txt @@ -120,8 +120,16 @@ OPTIONS --force:: By default, `add` refuses to create a new working tree when `<commit-ish>` is a branch name and is already checked out by - another working tree and `remove` refuses to remove an unclean - working tree. This option overrides these safeguards. + another working tree, or if `<path>` is already assigned to some + working tree but is missing (for instance, if `<path>` was deleted + manually). This option overrides these safeguards. To add a missing but + locked working tree path, specify `--force` twice. ++ +`move` refuses to move a locked working tree unless `--force` is specified +twice. ++ +`remove` refuses to remove an unclean working tree unless `--force` is used. +To remove a locked working tree, specify `--force` twice. -b <new-branch>:: -B <new-branch>:: diff --git a/Documentation/git.txt b/Documentation/git.txt index dba7f0c18e..2ac9b1c7fe 100644 --- a/Documentation/git.txt +++ b/Documentation/git.txt @@ -76,7 +76,7 @@ Note that omitting the `=` in `git -c foo.bar ...` is allowed and sets `foo.bar` to the boolean true value (just like `[foo]bar` would in a config file). Including the equals but with an empty value (like `git -c foo.bar= ...`) sets `foo.bar` to the empty string which `git config ---bool` will convert to `false`. +--type=bool` will convert to `false`. --exec-path[=<path>]:: Path to wherever your core Git programs are installed. @@ -599,8 +599,8 @@ trace messages into this file descriptor. + Alternatively, if the variable is set to an absolute path (starting with a '/' character), Git will interpret this -as a file path and will try to write the trace messages -into it. +as a file path and will try to append the trace messages +to it. + Unsetting the variable, or setting it to empty, "0" or "false" (case insensitive) disables trace messages. @@ -858,7 +858,9 @@ Reporting Bugs Report bugs to the Git mailing list <git@vger.kernel.org> where the development and maintenance is primarily done. You do not have to be -subscribed to the list to send a message there. +subscribed to the list to send a message there. See the list archive +at https://public-inbox.org/git for previous bug reports and other +discussions. Issues which are security relevant should be disclosed privately to the Git Security mailing list <git-security@googlegroups.com>. diff --git a/Documentation/gitcredentials.txt b/Documentation/gitcredentials.txt index f970196bc1..adc759612d 100644 --- a/Documentation/gitcredentials.txt +++ b/Documentation/gitcredentials.txt @@ -133,6 +133,12 @@ compares hostnames exactly, without considering whether two hosts are part of the same domain. Likewise, a config entry for `http://example.com` would not match: Git compares the protocols exactly. +If the "pattern" URL does include a path component, then this too must match +exactly: the context `https://example.com/bar/baz.git` will match a config +entry for `https://example.com/bar/baz.git` (in addition to matching the config +entry for `https://example.com`) but will not match a config entry for +`https://example.com/bar`. + CONFIGURATION OPTIONS --------------------- diff --git a/Documentation/gitcvs-config.txt b/Documentation/gitcvs-config.txt new file mode 100644 index 0000000000..02da427fd9 --- /dev/null +++ b/Documentation/gitcvs-config.txt @@ -0,0 +1,67 @@ +gitcvs.commitMsgAnnotation:: + Append this string to each commit message. Set to empty string + to disable this feature. Defaults to "via git-CVS emulator". + +gitcvs.enabled:: + Whether the CVS server interface is enabled for this repository. + See linkgit:git-cvsserver[1]. + +gitcvs.logFile:: + Path to a log file where the CVS server interface well... logs + various stuff. See linkgit:git-cvsserver[1]. + +gitcvs.usecrlfattr:: + If true, the server will look up the end-of-line conversion + attributes for files to determine the `-k` modes to use. If + the attributes force Git to treat a file as text, + the `-k` mode will be left blank so CVS clients will + treat it as text. If they suppress text conversion, the file + will be set with '-kb' mode, which suppresses any newline munging + the client might otherwise do. If the attributes do not allow + the file type to be determined, then `gitcvs.allBinary` is + used. See linkgit:gitattributes[5]. + +gitcvs.allBinary:: + This is used if `gitcvs.usecrlfattr` does not resolve + the correct '-kb' mode to use. If true, all + unresolved files are sent to the client in + mode '-kb'. This causes the client to treat them + as binary files, which suppresses any newline munging it + otherwise might do. Alternatively, if it is set to "guess", + then the contents of the file are examined to decide if + it is binary, similar to `core.autocrlf`. + +gitcvs.dbName:: + Database used by git-cvsserver to cache revision information + derived from the Git repository. The exact meaning depends on the + used database driver, for SQLite (which is the default driver) this + is a filename. Supports variable substitution (see + linkgit:git-cvsserver[1] for details). May not contain semicolons (`;`). + Default: '%Ggitcvs.%m.sqlite' + +gitcvs.dbDriver:: + Used Perl DBI driver. You can specify any available driver + for this here, but it might not work. git-cvsserver is tested + with 'DBD::SQLite', reported to work with 'DBD::Pg', and + reported *not* to work with 'DBD::mysql'. Experimental feature. + May not contain double colons (`:`). Default: 'SQLite'. + See linkgit:git-cvsserver[1]. + +gitcvs.dbUser, gitcvs.dbPass:: + Database user and password. Only useful if setting `gitcvs.dbDriver`, + since SQLite has no concept of database users and/or passwords. + 'gitcvs.dbUser' supports variable substitution (see + linkgit:git-cvsserver[1] for details). + +gitcvs.dbTableNamePrefix:: + Database table name prefix. Prepended to the names of any + database tables used, allowing a single database to be used + for several repositories. Supports variable substitution (see + linkgit:git-cvsserver[1] for details). Any non-alphabetic + characters will be replaced with underscores. + +All gitcvs variables except for `gitcvs.usecrlfattr` and +`gitcvs.allBinary` can also be specified as +'gitcvs.<access_method>.<varname>' (where 'access_method' +is one of "ext" and "pserver") to make them apply only for the given +access method. diff --git a/Documentation/gitrevisions.txt b/Documentation/gitrevisions.txt index 1f6cceaefb..d407b7dee1 100644 --- a/Documentation/gitrevisions.txt +++ b/Documentation/gitrevisions.txt @@ -19,9 +19,10 @@ walk the revision graph (such as linkgit:git-log[1]), all commits which are reachable from that commit. For commands that walk the revision graph one can also specify a range of revisions explicitly. -In addition, some Git commands (such as linkgit:git-show[1]) also take -revision parameters which denote other objects than commits, e.g. blobs -("files") or trees ("directories of files"). +In addition, some Git commands (such as linkgit:git-show[1] and +linkgit:git-push[1]) can also take revision parameters which denote +other objects than commits, e.g. blobs ("files") or trees +("directories of files"). include::revisions.txt[] diff --git a/Documentation/gui-config.txt b/Documentation/gui-config.txt new file mode 100644 index 0000000000..d30831a130 --- /dev/null +++ b/Documentation/gui-config.txt @@ -0,0 +1,57 @@ +gui.commitMsgWidth:: + Defines how wide the commit message window is in the + linkgit:git-gui[1]. "75" is the default. + +gui.diffContext:: + Specifies how many context lines should be used in calls to diff + made by the linkgit:git-gui[1]. The default is "5". + +gui.displayUntracked:: + Determines if linkgit:git-gui[1] shows untracked files + in the file list. The default is "true". + +gui.encoding:: + Specifies the default encoding to use for displaying of + file contents in linkgit:git-gui[1] and linkgit:gitk[1]. + It can be overridden by setting the 'encoding' attribute + for relevant files (see linkgit:gitattributes[5]). + If this option is not set, the tools default to the + locale encoding. + +gui.matchTrackingBranch:: + Determines if new branches created with linkgit:git-gui[1] should + default to tracking remote branches with matching names or + not. Default: "false". + +gui.newBranchTemplate:: + Is used as suggested name when creating new branches using the + linkgit:git-gui[1]. + +gui.pruneDuringFetch:: + "true" if linkgit:git-gui[1] should prune remote-tracking branches when + performing a fetch. The default value is "false". + +gui.trustmtime:: + Determines if linkgit:git-gui[1] should trust the file modification + timestamp or not. By default the timestamps are not trusted. + +gui.spellingDictionary:: + Specifies the dictionary used for spell checking commit messages in + the linkgit:git-gui[1]. When set to "none" spell checking is turned + off. + +gui.fastCopyBlame:: + If true, 'git gui blame' uses `-C` instead of `-C -C` for original + location detection. It makes blame significantly faster on huge + repositories at the expense of less thorough copy detection. + +gui.copyBlameThreshold:: + Specifies the threshold to use in 'git gui blame' original location + detection, measured in alphanumeric characters. See the + linkgit:git-blame[1] manual for more information on copy detection. + +gui.blamehistoryctx:: + Specifies the radius of history context in days to show in + linkgit:gitk[1] for the selected commit, when the `Show History + Context` menu item is invoked from 'git gui blame'. If this + variable is set to zero, the whole history is shown. diff --git a/Documentation/pull-config.txt b/Documentation/pull-config.txt new file mode 100644 index 0000000000..bb23a9947d --- /dev/null +++ b/Documentation/pull-config.txt @@ -0,0 +1,36 @@ +pull.ff:: + By default, Git does not create an extra merge commit when merging + a commit that is a descendant of the current commit. Instead, the + tip of the current branch is fast-forwarded. When set to `false`, + this variable tells Git to create an extra merge commit in such + a case (equivalent to giving the `--no-ff` option from the command + line). When set to `only`, only such fast-forward merges are + allowed (equivalent to giving the `--ff-only` option from the + command line). This setting overrides `merge.ff` when pulling. + +pull.rebase:: + When true, rebase branches on top of the fetched branch, instead + of merging the default branch from the default remote when "git + pull" is run. See "branch.<name>.rebase" for setting this on a + per-branch basis. ++ +When `merges`, pass the `--rebase-merges` option to 'git rebase' +so that the local merge commits are included in the rebase (see +linkgit:git-rebase[1] for details). ++ +When preserve, also pass `--preserve-merges` along to 'git rebase' +so that locally committed merge commits will not be flattened +by running 'git pull'. ++ +When the value is `interactive`, the rebase is run in interactive mode. ++ +*NOTE*: this is a possibly dangerous operation; do *not* use +it unless you understand the implications (see linkgit:git-rebase[1] +for details). + +pull.octopus:: + The default merge strategy to use when pulling multiple branches + at once. + +pull.twohead:: + The default merge strategy to use when pulling a single branch. diff --git a/Documentation/pull-fetch-param.txt b/Documentation/pull-fetch-param.txt index f1fb08dc68..7d3a60f5b9 100644 --- a/Documentation/pull-fetch-param.txt +++ b/Documentation/pull-fetch-param.txt @@ -33,11 +33,40 @@ name. it requests fetching everything up to the given tag. + The remote ref that matches <src> -is fetched, and if <dst> is not an empty string, the local -ref that matches it is fast-forwarded using <src>. -If the optional plus `+` is used, the local ref -is updated even if it does not result in a fast-forward -update. +is fetched, and if <dst> is not an empty string, an attempt +is made to update the local ref that matches it. ++ +Whether that update is allowed without `--force` depends on the ref +namespace it's being fetched to, the type of object being fetched, and +whether the update is considered to be a fast-forward. Generally, the +same rules apply for fetching as when pushing, see the `<refspec>...` +section of linkgit:git-push[1] for what those are. Exceptions to those +rules particular to 'git fetch' are noted below. ++ +Until Git version 2.20, and unlike when pushing with +linkgit:git-push[1], any updates to `refs/tags/*` would be accepted +without `+` in the refspec (or `--force`). When fetching, we promiscuously +considered all tag updates from a remote to be forced fetches. Since +Git version 2.20, fetching to update `refs/tags/*` works the same way +as when pushing. I.e. any updates will be rejected without `+` in the +refspec (or `--force`). ++ +Unlike when pushing with linkgit:git-push[1], any updates outside of +`refs/{tags,heads}/*` will be accepted without `+` in the refspec (or +`--force`), whether that's swapping e.g. a tree object for a blob, or +a commit for another commit that's doesn't have the previous commit as +an ancestor etc. ++ +Unlike when pushing with linkgit:git-push[1], there is no +configuration which'll amend these rules, and nothing like a +`pre-fetch` hook analogous to the `pre-receive` hook. ++ +As with pushing with linkgit:git-push[1], all of the rules described +above about what's not allowed as an update can be overridden by +adding an the optional leading `+` to a refspec (or using `--force` +command line option). The only exception to this is that no amount of +forcing will make the `refs/heads/*` namespace accept a non-commit +object. + [NOTE] When the remote branch you want to fetch is known to diff --git a/Documentation/push-config.txt b/Documentation/push-config.txt new file mode 100644 index 0000000000..0a0e000569 --- /dev/null +++ b/Documentation/push-config.txt @@ -0,0 +1,113 @@ +push.default:: + Defines the action `git push` should take if no refspec is + explicitly given. Different values are well-suited for + specific workflows; for instance, in a purely central workflow + (i.e. the fetch source is equal to the push destination), + `upstream` is probably what you want. Possible values are: ++ +-- + +* `nothing` - do not push anything (error out) unless a refspec is + explicitly given. This is primarily meant for people who want to + avoid mistakes by always being explicit. + +* `current` - push the current branch to update a branch with the same + name on the receiving end. Works in both central and non-central + workflows. + +* `upstream` - push the current branch back to the branch whose + changes are usually integrated into the current branch (which is + called `@{upstream}`). This mode only makes sense if you are + pushing to the same repository you would normally pull from + (i.e. central workflow). + +* `tracking` - This is a deprecated synonym for `upstream`. + +* `simple` - in centralized workflow, work like `upstream` with an + added safety to refuse to push if the upstream branch's name is + different from the local one. ++ +When pushing to a remote that is different from the remote you normally +pull from, work as `current`. This is the safest option and is suited +for beginners. ++ +This mode has become the default in Git 2.0. + +* `matching` - push all branches having the same name on both ends. + This makes the repository you are pushing to remember the set of + branches that will be pushed out (e.g. if you always push 'maint' + and 'master' there and no other branches, the repository you push + to will have these two branches, and your local 'maint' and + 'master' will be pushed there). ++ +To use this mode effectively, you have to make sure _all_ the +branches you would push out are ready to be pushed out before +running 'git push', as the whole point of this mode is to allow you +to push all of the branches in one go. If you usually finish work +on only one branch and push out the result, while other branches are +unfinished, this mode is not for you. Also this mode is not +suitable for pushing into a shared central repository, as other +people may add new branches there, or update the tip of existing +branches outside your control. ++ +This used to be the default, but not since Git 2.0 (`simple` is the +new default). + +-- + +push.followTags:: + If set to true enable `--follow-tags` option by default. You + may override this configuration at time of push by specifying + `--no-follow-tags`. + +push.gpgSign:: + May be set to a boolean value, or the string 'if-asked'. A true + value causes all pushes to be GPG signed, as if `--signed` is + passed to linkgit:git-push[1]. The string 'if-asked' causes + pushes to be signed if the server supports it, as if + `--signed=if-asked` is passed to 'git push'. A false value may + override a value from a lower-priority config file. An explicit + command-line flag always overrides this config option. + +push.pushOption:: + When no `--push-option=<option>` argument is given from the + command line, `git push` behaves as if each <value> of + this variable is given as `--push-option=<value>`. ++ +This is a multi-valued variable, and an empty value can be used in a +higher priority configuration file (e.g. `.git/config` in a +repository) to clear the values inherited from a lower priority +configuration files (e.g. `$HOME/.gitconfig`). ++ +-- + +Example: + +/etc/gitconfig + push.pushoption = a + push.pushoption = b + +~/.gitconfig + push.pushoption = c + +repo/.git/config + push.pushoption = + push.pushoption = b + +This will result in only b (a and c are cleared). + +-- + +push.recurseSubmodules:: + Make sure all submodule commits used by the revisions to be pushed + are available on a remote-tracking branch. If the value is 'check' + then Git will verify that all submodule commits that changed in the + revisions to be pushed are available on at least one remote of the + submodule. If any commits are missing, the push will be aborted and + exit with non-zero status. If the value is 'on-demand' then all + submodules that changed in the revisions to be pushed will be + pushed. If on-demand was not able to push all necessary revisions + it will also be aborted and exit with non-zero status. If the value + is 'no' then default behavior of ignoring submodules when pushing + is retained. You may override this configuration at time of push by + specifying '--recurse-submodules=check|on-demand|no'. diff --git a/Documentation/receive-config.txt b/Documentation/receive-config.txt new file mode 100644 index 0000000000..65f78aac37 --- /dev/null +++ b/Documentation/receive-config.txt @@ -0,0 +1,123 @@ +receive.advertiseAtomic:: + By default, git-receive-pack will advertise the atomic push + capability to its clients. If you don't want to advertise this + capability, set this variable to false. + +receive.advertisePushOptions:: + When set to true, git-receive-pack will advertise the push options + capability to its clients. False by default. + +receive.autogc:: + By default, git-receive-pack will run "git-gc --auto" after + receiving data from git-push and updating refs. You can stop + it by setting this variable to false. + +receive.certNonceSeed:: + By setting this variable to a string, `git receive-pack` + will accept a `git push --signed` and verifies it by using + a "nonce" protected by HMAC using this string as a secret + key. + +receive.certNonceSlop:: + When a `git push --signed` sent a push certificate with a + "nonce" that was issued by a receive-pack serving the same + repository within this many seconds, export the "nonce" + found in the certificate to `GIT_PUSH_CERT_NONCE` to the + hooks (instead of what the receive-pack asked the sending + side to include). This may allow writing checks in + `pre-receive` and `post-receive` a bit easier. Instead of + checking `GIT_PUSH_CERT_NONCE_SLOP` environment variable + that records by how many seconds the nonce is stale to + decide if they want to accept the certificate, they only + can check `GIT_PUSH_CERT_NONCE_STATUS` is `OK`. + +receive.fsckObjects:: + If it is set to true, git-receive-pack will check all received + objects. See `transfer.fsckObjects` for what's checked. + Defaults to false. If not set, the value of + `transfer.fsckObjects` is used instead. + +receive.fsck.<msg-id>:: + Acts like `fsck.<msg-id>`, but is used by + linkgit:git-receive-pack[1] instead of + linkgit:git-fsck[1]. See the `fsck.<msg-id>` documentation for + details. + +receive.fsck.skipList:: + Acts like `fsck.skipList`, but is used by + linkgit:git-receive-pack[1] instead of + linkgit:git-fsck[1]. See the `fsck.skipList` documentation for + details. + +receive.keepAlive:: + After receiving the pack from the client, `receive-pack` may + produce no output (if `--quiet` was specified) while processing + the pack, causing some networks to drop the TCP connection. + With this option set, if `receive-pack` does not transmit + any data in this phase for `receive.keepAlive` seconds, it will + send a short keepalive packet. The default is 5 seconds; set + to 0 to disable keepalives entirely. + +receive.unpackLimit:: + If the number of objects received in a push is below this + limit then the objects will be unpacked into loose object + files. However if the number of received objects equals or + exceeds this limit then the received pack will be stored as + a pack, after adding any missing delta bases. Storing the + pack from a push can make the push operation complete faster, + especially on slow filesystems. If not set, the value of + `transfer.unpackLimit` is used instead. + +receive.maxInputSize:: + If the size of the incoming pack stream is larger than this + limit, then git-receive-pack will error out, instead of + accepting the pack file. If not set or set to 0, then the size + is unlimited. + +receive.denyDeletes:: + If set to true, git-receive-pack will deny a ref update that deletes + the ref. Use this to prevent such a ref deletion via a push. + +receive.denyDeleteCurrent:: + If set to true, git-receive-pack will deny a ref update that + deletes the currently checked out branch of a non-bare repository. + +receive.denyCurrentBranch:: + If set to true or "refuse", git-receive-pack will deny a ref update + to the currently checked out branch of a non-bare repository. + Such a push is potentially dangerous because it brings the HEAD + out of sync with the index and working tree. If set to "warn", + print a warning of such a push to stderr, but allow the push to + proceed. If set to false or "ignore", allow such pushes with no + message. Defaults to "refuse". ++ +Another option is "updateInstead" which will update the working +tree if pushing into the current branch. This option is +intended for synchronizing working directories when one side is not easily +accessible via interactive ssh (e.g. a live web site, hence the requirement +that the working directory be clean). This mode also comes in handy when +developing inside a VM to test and fix code on different Operating Systems. ++ +By default, "updateInstead" will refuse the push if the working tree or +the index have any difference from the HEAD, but the `push-to-checkout` +hook can be used to customize this. See linkgit:githooks[5]. + +receive.denyNonFastForwards:: + If set to true, git-receive-pack will deny a ref update which is + not a fast-forward. Use this to prevent such an update via a push, + even if that push is forced. This configuration variable is + set when initializing a shared repository. + +receive.hideRefs:: + This variable is the same as `transfer.hideRefs`, but applies + only to `receive-pack` (and so affects pushes, but not fetches). + An attempt to update or delete a hidden ref by `git push` is + rejected. + +receive.updateServerInfo:: + If set to true, git-receive-pack will run git-update-server-info + after receiving data from git-push and updating refs. + +receive.shallowUpdate:: + If set to true, .git/shallow can be updated when new refs + require new shallow roots. Otherwise those refs are rejected. diff --git a/Documentation/sendemail-config.txt b/Documentation/sendemail-config.txt new file mode 100644 index 0000000000..0006faf800 --- /dev/null +++ b/Documentation/sendemail-config.txt @@ -0,0 +1,63 @@ +sendemail.identity:: + A configuration identity. When given, causes values in the + 'sendemail.<identity>' subsection to take precedence over + values in the 'sendemail' section. The default identity is + the value of `sendemail.identity`. + +sendemail.smtpEncryption:: + See linkgit:git-send-email[1] for description. Note that this + setting is not subject to the 'identity' mechanism. + +sendemail.smtpssl (deprecated):: + Deprecated alias for 'sendemail.smtpEncryption = ssl'. + +sendemail.smtpsslcertpath:: + Path to ca-certificates (either a directory or a single file). + Set it to an empty string to disable certificate verification. + +sendemail.<identity>.*:: + Identity-specific versions of the 'sendemail.*' parameters + found below, taking precedence over those when this + identity is selected, through either the command-line or + `sendemail.identity`. + +sendemail.aliasesFile:: +sendemail.aliasFileType:: +sendemail.annotate:: +sendemail.bcc:: +sendemail.cc:: +sendemail.ccCmd:: +sendemail.chainReplyTo:: +sendemail.confirm:: +sendemail.envelopeSender:: +sendemail.from:: +sendemail.multiEdit:: +sendemail.signedoffbycc:: +sendemail.smtpPass:: +sendemail.suppresscc:: +sendemail.suppressFrom:: +sendemail.to:: +sendemail.tocmd:: +sendemail.smtpDomain:: +sendemail.smtpServer:: +sendemail.smtpServerPort:: +sendemail.smtpServerOption:: +sendemail.smtpUser:: +sendemail.thread:: +sendemail.transferEncoding:: +sendemail.validate:: +sendemail.xmailer:: + See linkgit:git-send-email[1] for description. + +sendemail.signedoffcc (deprecated):: + Deprecated alias for `sendemail.signedoffbycc`. + +sendemail.smtpBatchSize:: + Number of messages to be sent per connection, after that a relogin + will happen. If the value is 0 or undefined, send all messages in + one connection. + See also the `--batch-size` option of linkgit:git-send-email[1]. + +sendemail.smtpReloginDelay:: + Seconds wait before reconnecting to smtp server. + See also the `--relogin-delay` option of linkgit:git-send-email[1]. diff --git a/Documentation/submodule-config.txt b/Documentation/submodule-config.txt new file mode 100644 index 0000000000..0a1293b051 --- /dev/null +++ b/Documentation/submodule-config.txt @@ -0,0 +1,82 @@ +submodule.<name>.url:: + The URL for a submodule. This variable is copied from the .gitmodules + file to the git config via 'git submodule init'. The user can change + the configured URL before obtaining the submodule via 'git submodule + update'. If neither submodule.<name>.active or submodule.active are + set, the presence of this variable is used as a fallback to indicate + whether the submodule is of interest to git commands. + See linkgit:git-submodule[1] and linkgit:gitmodules[5] for details. + +submodule.<name>.update:: + The method by which a submodule is updated by 'git submodule update', + which is the only affected command, others such as + 'git checkout --recurse-submodules' are unaffected. It exists for + historical reasons, when 'git submodule' was the only command to + interact with submodules; settings like `submodule.active` + and `pull.rebase` are more specific. It is populated by + `git submodule init` from the linkgit:gitmodules[5] file. + See description of 'update' command in linkgit:git-submodule[1]. + +submodule.<name>.branch:: + The remote branch name for a submodule, used by `git submodule + update --remote`. Set this option to override the value found in + the `.gitmodules` file. See linkgit:git-submodule[1] and + linkgit:gitmodules[5] for details. + +submodule.<name>.fetchRecurseSubmodules:: + This option can be used to control recursive fetching of this + submodule. It can be overridden by using the --[no-]recurse-submodules + command-line option to "git fetch" and "git pull". + This setting will override that from in the linkgit:gitmodules[5] + file. + +submodule.<name>.ignore:: + Defines under what circumstances "git status" and the diff family show + a submodule as modified. When set to "all", it will never be considered + modified (but it will nonetheless show up in the output of status and + commit when it has been staged), "dirty" will ignore all changes + to the submodules work tree and + takes only differences between the HEAD of the submodule and the commit + recorded in the superproject into account. "untracked" will additionally + let submodules with modified tracked files in their work tree show up. + Using "none" (the default when this option is not set) also shows + submodules that have untracked files in their work tree as changed. + This setting overrides any setting made in .gitmodules for this submodule, + both settings can be overridden on the command line by using the + "--ignore-submodules" option. The 'git submodule' commands are not + affected by this setting. + +submodule.<name>.active:: + Boolean value indicating if the submodule is of interest to git + commands. This config option takes precedence over the + submodule.active config option. See linkgit:gitsubmodules[7] for + details. + +submodule.active:: + A repeated field which contains a pathspec used to match against a + submodule's path to determine if the submodule is of interest to git + commands. See linkgit:gitsubmodules[7] for details. + +submodule.recurse:: + Specifies if commands recurse into submodules by default. This + applies to all commands that have a `--recurse-submodules` option, + except `clone`. + Defaults to false. + +submodule.fetchJobs:: + Specifies how many submodules are fetched/cloned at the same time. + A positive integer allows up to that number of submodules fetched + in parallel. A value of 0 will give some reasonable default. + If unset, it defaults to 1. + +submodule.alternateLocation:: + Specifies how the submodules obtain alternates when submodules are + cloned. Possible values are `no`, `superproject`. + By default `no` is assumed, which doesn't add references. When the + value is set to `superproject` the submodule to be cloned computes + its alternates location relative to the superprojects alternate. + +submodule.alternateErrorStrategy:: + Specifies how to treat errors with the alternates for a submodule + as computed via `submodule.alternateLocation`. Possible values are + `ignore`, `info`, `die`. Default is `die`. diff --git a/Documentation/technical/commit-graph.txt b/Documentation/technical/commit-graph.txt index c664acbd76..7805b0968c 100644 --- a/Documentation/technical/commit-graph.txt +++ b/Documentation/technical/commit-graph.txt @@ -15,13 +15,13 @@ There are two main costs here: 1. Decompressing and parsing commits. 2. Walking the entire graph to satisfy topological order constraints. -The commit graph file is a supplemental data structure that accelerates +The commit-graph file is a supplemental data structure that accelerates commit graph walks. If a user downgrades or disables the 'core.commitGraph' config setting, then the existing ODB is sufficient. The file is stored as "commit-graph" either in the .git/objects/info directory or in the info directory of an alternate. -The commit graph file stores the commit graph structure along with some +The commit-graph file stores the commit graph structure along with some extra metadata to speed up graph walks. By listing commit OIDs in lexi- cographic order, we can identify an integer position for each commit and refer to the parents of a commit using those integer positions. We use @@ -103,7 +103,7 @@ that of a parent. Design Details -------------- -- The commit graph file is stored in a file named 'commit-graph' in the +- The commit-graph file is stored in a file named 'commit-graph' in the .git/objects/info directory. This could be stored in the info directory of an alternate. @@ -112,12 +112,24 @@ Design Details - The file format includes parameters for the object ID hash function, so a future change of hash algorithm does not require a change in format. +- Commit grafts and replace objects can change the shape of the commit + history. The latter can also be enabled/disabled on the fly using + `--no-replace-objects`. This leads to difficultly storing both possible + interpretations of a commit id, especially when computing generation + numbers. The commit-graph will not be read or written when + replace-objects or grafts are present. + +- Shallow clones create grafts of commits by dropping their parents. This + leads the commit-graph to think those commits have generation number 1. + If and when those commits are made unshallow, those generation numbers + become invalid. Since shallow clones are intended to restrict the commit + history to a very small set of commits, the commit-graph feature is less + helpful for these clones, anyway. The commit-graph will not be read or + written when shallow commits are present. + Future Work ----------- -- The commit graph feature currently does not honor commit grafts. This can - be remedied by duplicating or refactoring the current graft logic. - - After computing and storing generation numbers, we must make graph walks aware of generation numbers to gain the performance benefits they enable. This will mostly be accomplished by swapping a commit-date-ordered @@ -127,7 +139,7 @@ Future Work - 'log --topo-order' - 'tag --merged' -- A server could provide a commit graph file as part of the network protocol +- A server could provide a commit-graph file as part of the network protocol to avoid extra calculations by clients. This feature is only of benefit if the user is willing to trust the file, because verifying the file is correct is as hard as computing it from scratch. diff --git a/Documentation/technical/multi-pack-index.txt b/Documentation/technical/multi-pack-index.txt new file mode 100644 index 0000000000..d7e57639f7 --- /dev/null +++ b/Documentation/technical/multi-pack-index.txt @@ -0,0 +1,109 @@ +Multi-Pack-Index (MIDX) Design Notes +==================================== + +The Git object directory contains a 'pack' directory containing +packfiles (with suffix ".pack") and pack-indexes (with suffix +".idx"). The pack-indexes provide a way to lookup objects and +navigate to their offset within the pack, but these must come +in pairs with the packfiles. This pairing depends on the file +names, as the pack-index differs only in suffix with its pack- +file. While the pack-indexes provide fast lookup per packfile, +this performance degrades as the number of packfiles increases, +because abbreviations need to inspect every packfile and we are +more likely to have a miss on our most-recently-used packfile. +For some large repositories, repacking into a single packfile +is not feasible due to storage space or excessive repack times. + +The multi-pack-index (MIDX for short) stores a list of objects +and their offsets into multiple packfiles. It contains: + +- A list of packfile names. +- A sorted list of object IDs. +- A list of metadata for the ith object ID including: + - A value j referring to the jth packfile. + - An offset within the jth packfile for the object. +- If large offsets are required, we use another list of large + offsets similar to version 2 pack-indexes. + +Thus, we can provide O(log N) lookup time for any number +of packfiles. + +Design Details +-------------- + +- The MIDX is stored in a file named 'multi-pack-index' in the + .git/objects/pack directory. This could be stored in the pack + directory of an alternate. It refers only to packfiles in that + same directory. + +- The pack.multiIndex config setting must be on to consume MIDX files. + +- The file format includes parameters for the object ID hash + function, so a future change of hash algorithm does not require + a change in format. + +- The MIDX keeps only one record per object ID. If an object appears + in multiple packfiles, then the MIDX selects the copy in the most- + recently modified packfile. + +- If there exist packfiles in the pack directory not registered in + the MIDX, then those packfiles are loaded into the `packed_git` + list and `packed_git_mru` cache. + +- The pack-indexes (.idx files) remain in the pack directory so we + can delete the MIDX file, set core.midx to false, or downgrade + without any loss of information. + +- The MIDX file format uses a chunk-based approach (similar to the + commit-graph file) that allows optional data to be added. + +Future Work +----------- + +- Add a 'verify' subcommand to the 'git midx' builtin to verify the + contents of the multi-pack-index file match the offsets listed in + the corresponding pack-indexes. + +- The multi-pack-index allows many packfiles, especially in a context + where repacking is expensive (such as a very large repo), or + unexpected maintenance time is unacceptable (such as a high-demand + build machine). However, the multi-pack-index needs to be rewritten + in full every time. We can extend the format to be incremental, so + writes are fast. By storing a small "tip" multi-pack-index that + points to large "base" MIDX files, we can keep writes fast while + still reducing the number of binary searches required for object + lookups. + +- The reachability bitmap is currently paired directly with a single + packfile, using the pack-order as the object order to hopefully + compress the bitmaps well using run-length encoding. This could be + extended to pair a reachability bitmap with a multi-pack-index. If + the multi-pack-index is extended to store a "stable object order" + (a function Order(hash) = integer that is constant for a given hash, + even as the multi-pack-index is updated) then a reachability bitmap + could point to a multi-pack-index and be updated independently. + +- Packfiles can be marked as "special" using empty files that share + the initial name but replace ".pack" with ".keep" or ".promisor". + We can add an optional chunk of data to the multi-pack-index that + records flags of information about the packfiles. This allows new + states, such as 'repacked' or 'redeltified', that can help with + pack maintenance in a multi-pack environment. It may also be + helpful to organize packfiles by object type (commit, tree, blob, + etc.) and use this metadata to help that maintenance. + +- The partial clone feature records special "promisor" packs that + may point to objects that are not stored locally, but available + on request to a server. The multi-pack-index does not currently + track these promisor packs. + +Related Links +------------- +[0] https://bugs.chromium.org/p/git/issues/detail?id=6 + Chromium work item for: Multi-Pack Index (MIDX) + +[1] https://public-inbox.org/git/20180107181459.222909-1-dstolee@microsoft.com/ + An earlier RFC for the multi-pack-index feature + +[2] https://public-inbox.org/git/alpine.DEB.2.20.1803091557510.23109@alexmv-linux/ + Git Merge 2018 Contributor's summit notes (includes discussion of MIDX) diff --git a/Documentation/technical/pack-format.txt b/Documentation/technical/pack-format.txt index 70a99fd142..cab5bdd2ff 100644 --- a/Documentation/technical/pack-format.txt +++ b/Documentation/technical/pack-format.txt @@ -252,3 +252,80 @@ Pack file entry: <+ corresponding packfile. 20-byte SHA-1-checksum of all of the above. + +== multi-pack-index (MIDX) files have the following format: + +The multi-pack-index files refer to multiple pack-files and loose objects. + +In order to allow extensions that add extra data to the MIDX, we organize +the body into "chunks" and provide a lookup table at the beginning of the +body. The header includes certain length values, such as the number of packs, +the number of base MIDX files, hash lengths and types. + +All 4-byte numbers are in network order. + +HEADER: + + 4-byte signature: + The signature is: {'M', 'I', 'D', 'X'} + + 1-byte version number: + Git only writes or recognizes version 1. + + 1-byte Object Id Version + Git only writes or recognizes version 1 (SHA1). + + 1-byte number of "chunks" + + 1-byte number of base multi-pack-index files: + This value is currently always zero. + + 4-byte number of pack files + +CHUNK LOOKUP: + + (C + 1) * 12 bytes providing the chunk offsets: + First 4 bytes describe chunk id. Value 0 is a terminating label. + Other 8 bytes provide offset in current file for chunk to start. + (Chunks are provided in file-order, so you can infer the length + using the next chunk position if necessary.) + + The remaining data in the body is described one chunk at a time, and + these chunks may be given in any order. Chunks are required unless + otherwise specified. + +CHUNK DATA: + + Packfile Names (ID: {'P', 'N', 'A', 'M'}) + Stores the packfile names as concatenated, null-terminated strings. + Packfiles must be listed in lexicographic order for fast lookups by + name. This is the only chunk not guaranteed to be a multiple of four + bytes in length, so should be the last chunk for alignment reasons. + + OID Fanout (ID: {'O', 'I', 'D', 'F'}) + The ith entry, F[i], stores the number of OIDs with first + byte at most i. Thus F[255] stores the total + number of objects. + + OID Lookup (ID: {'O', 'I', 'D', 'L'}) + The OIDs for all objects in the MIDX are stored in lexicographic + order in this chunk. + + Object Offsets (ID: {'O', 'O', 'F', 'F'}) + Stores two 4-byte values for every object. + 1: The pack-int-id for the pack storing this object. + 2: The offset within the pack. + If all offsets are less than 2^31, then the large offset chunk + will not exist and offsets are stored as in IDX v1. + If there is at least one offset value larger than 2^32-1, then + the large offset chunk must exist. If the large offset chunk + exists and the 31st bit is on, then removing that bit reveals + the row in the large offsets containing the 8-byte offset of + this object. + + [Optional] Object Large Offsets (ID: {'L', 'O', 'F', 'F'}) + 8-byte offsets into large packfiles. + +TRAILER: + + 20-byte SHA1-checksum of the above contents. diff --git a/Documentation/technical/rerere.txt b/Documentation/technical/rerere.txt new file mode 100644 index 0000000000..aa22d7ace8 --- /dev/null +++ b/Documentation/technical/rerere.txt @@ -0,0 +1,186 @@ +Rerere +====== + +This document describes the rerere logic. + +Conflict normalization +---------------------- + +To ensure recorded conflict resolutions can be looked up in the rerere +database, even when branches are merged in a different order, +different branches are merged that result in the same conflict, or +when different conflict style settings are used, rerere normalizes the +conflicts before writing them to the rerere database. + +Different conflict styles and branch names are normalized by stripping +the labels from the conflict markers, and removing the common ancestor +version from the `diff3` conflict style. Branches that are merged +in different order are normalized by sorting the conflict hunks. More +on each of those steps in the following sections. + +Once these two normalization operations are applied, a conflict ID is +calculated based on the normalized conflict, which is later used by +rerere to look up the conflict in the rerere database. + +Removing the common ancestor version +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Say we have three branches AB, AC and AC2. The common ancestor of +these branches has a file with a line containing the string "A" (for +brevity this is called "line A" in the rest of the document). In +branch AB this line is changed to "B", in AC, this line is changed to +"C", and branch AC2 is forked off of AC, after the line was changed to +"C". + +Forking a branch ABAC off of branch AB and then merging AC into it, we +get a conflict like the following: + + <<<<<<< HEAD + B + ======= + C + >>>>>>> AC + +Doing the analogous with AC2 (forking a branch ABAC2 off of branch AB +and then merging branch AC2 into it), using the diff3 conflict style, +we get a conflict like the following: + + <<<<<<< HEAD + B + ||||||| merged common ancestors + A + ======= + C + >>>>>>> AC2 + +By resolving this conflict, to leave line D, the user declares: + + After examining what branches AB and AC did, I believe that making + line A into line D is the best thing to do that is compatible with + what AB and AC wanted to do. + +As branch AC2 refers to the same commit as AC, the above implies that +this is also compatible what AB and AC2 wanted to do. + +By extension, this means that rerere should recognize that the above +conflicts are the same. To do this, the labels on the conflict +markers are stripped, and the common ancestor version is removed. The above +examples would both result in the following normalized conflict: + + <<<<<<< + B + ======= + C + >>>>>>> + +Sorting hunks +~~~~~~~~~~~~~ + +As before, lets imagine that a common ancestor had a file with line A +its early part, and line X in its late part. And then four branches +are forked that do these things: + + - AB: changes A to B + - AC: changes A to C + - XY: changes X to Y + - XZ: changes X to Z + +Now, forking a branch ABAC off of branch AB and then merging AC into +it, and forking a branch ACAB off of branch AC and then merging AB +into it, would yield the conflict in a different order. The former +would say "A became B or C, what now?" while the latter would say "A +became C or B, what now?" + +As a reminder, the act of merging AC into ABAC and resolving the +conflict to leave line D means that the user declares: + + After examining what branches AB and AC did, I believe that + making line A into line D is the best thing to do that is + compatible with what AB and AC wanted to do. + +So the conflict we would see when merging AB into ACAB should be +resolved the same way---it is the resolution that is in line with that +declaration. + +Imagine that similarly previously a branch XYXZ was forked from XY, +and XZ was merged into it, and resolved "X became Y or Z" into "X +became W". + +Now, if a branch ABXY was forked from AB and then merged XY, then ABXY +would have line B in its early part and line Y in its later part. +Such a merge would be quite clean. We can construct 4 combinations +using these four branches ((AB, AC) x (XY, XZ)). + +Merging ABXY and ACXZ would make "an early A became B or C, a late X +became Y or Z" conflict, while merging ACXY and ABXZ would make "an +early A became C or B, a late X became Y or Z". We can see there are +4 combinations of ("B or C", "C or B") x ("X or Y", "Y or X"). + +By sorting, the conflict is given its canonical name, namely, "an +early part became B or C, a late part becames X or Y", and whenever +any of these four patterns appear, and we can get to the same conflict +and resolution that we saw earlier. + +Without the sorting, we'd have to somehow find a previous resolution +from combinatorial explosion. + +Conflict ID calculation +~~~~~~~~~~~~~~~~~~~~~~~ + +Once the conflict normalization is done, the conflict ID is calculated +as the sha1 hash of the conflict hunks appended to each other, +separated by <NUL> characters. The conflict markers are stripped out +before the sha1 is calculated. So in the example above, where we +merge branch AC which changes line A to line C, into branch AB, which +changes line A to line C, the conflict ID would be +SHA1('B<NUL>C<NUL>'). + +If there are multiple conflicts in one file, the sha1 is calculated +the same way with all hunks appended to each other, in the order in +which they appear in the file, separated by a <NUL> character. + +Nested conflicts +~~~~~~~~~~~~~~~~ + +Nested conflicts are handled very similarly to "simple" conflicts. +Similar to simple conflicts, the conflict is first normalized by +stripping the labels from conflict markers, stripping the common ancestor +version, and the sorting the conflict hunks, both for the outer and the +inner conflict. This is done recursively, so any number of nested +conflicts can be handled. + +Note that this only works for conflict markers that "cleanly nest". If +there are any unmatched conflict markers, rerere will fail to handle +the conflict and record a conflict resolution. + +The only difference is in how the conflict ID is calculated. For the +inner conflict, the conflict markers themselves are not stripped out +before calculating the sha1. + +Say we have the following conflict for example: + + <<<<<<< HEAD + 1 + ======= + <<<<<<< HEAD + 3 + ======= + 2 + >>>>>>> branch-2 + >>>>>>> branch-3~ + +After stripping out the labels of the conflict markers, and sorting +the hunks, the conflict would look as follows: + + <<<<<<< + 1 + ======= + <<<<<<< + 2 + ======= + 3 + >>>>>>> + >>>>>>> + +and finally the conflict ID would be calculated as: +`sha1('1<NUL><<<<<<<\n3\n=======\n2\n>>>>>>><NUL>')` |