diff options
Diffstat (limited to 'Documentation')
68 files changed, 464 insertions, 255 deletions
diff --git a/Documentation/.gitignore b/Documentation/.gitignore index 3ef54e0adb..bf2bf271b5 100644 --- a/Documentation/.gitignore +++ b/Documentation/.gitignore @@ -13,3 +13,4 @@ mergetools-*.txt manpage-base-url.xsl SubmittingPatches.txt tmp-doc-diff/ +GIT-ASCIIDOCFLAGS diff --git a/Documentation/CodingGuidelines b/Documentation/CodingGuidelines index 8579530710..32210a4386 100644 --- a/Documentation/CodingGuidelines +++ b/Documentation/CodingGuidelines @@ -580,11 +580,14 @@ Writing Documentation: or commands: Literal examples (e.g. use of command-line options, command names, - branch names, configuration and environment variables) must be - typeset in monospace (i.e. wrapped with backticks): + branch names, URLs, pathnames (files and directories), configuration and + environment variables) must be typeset in monospace (i.e. wrapped with + backticks): `--pretty=oneline` `git rev-list` `remote.pushDefault` + `http://git.example.com` + `.git/config` `GIT_DIR` `HEAD` diff --git a/Documentation/Makefile b/Documentation/Makefile index 26a2342bea..6d738f831e 100644 --- a/Documentation/Makefile +++ b/Documentation/Makefile @@ -12,7 +12,6 @@ MAN1_TXT += $(filter-out \ $(wildcard git-*.txt)) MAN1_TXT += git.txt MAN1_TXT += gitk.txt -MAN1_TXT += gitremote-helpers.txt MAN1_TXT += gitweb.txt MAN5_TXT += gitattributes.txt @@ -30,6 +29,7 @@ MAN7_TXT += gitdiffcore.txt MAN7_TXT += giteveryday.txt MAN7_TXT += gitglossary.txt MAN7_TXT += gitnamespaces.txt +MAN7_TXT += gitremote-helpers.txt MAN7_TXT += gitrevisions.txt MAN7_TXT += gitsubmodules.txt MAN7_TXT += gittutorial-2.txt @@ -331,6 +331,15 @@ mergetools-list.made: ../git-mergetool--lib.sh $(wildcard ../mergetools/*) show_tool_names can_merge "* " || :' >mergetools-merge.txt && \ date >$@ +TRACK_ASCIIDOCFLAGS = $(subst ','\'',$(ASCIIDOC_COMMON):$(ASCIIDOC_HTML):$(ASCIIDOC_DOCBOOK)) + +GIT-ASCIIDOCFLAGS: FORCE + @FLAGS='$(TRACK_ASCIIDOCFLAGS)'; \ + if test x"$$FLAGS" != x"`cat GIT-ASCIIDOCFLAGS 2>/dev/null`" ; then \ + echo >&2 " * new asciidoc flags"; \ + echo "$$FLAGS" >GIT-ASCIIDOCFLAGS; \ + fi + clean: $(RM) *.xml *.xml+ *.html *.html+ *.1 *.5 *.7 $(RM) *.texi *.texi+ *.texi++ git.info gitman.info @@ -340,13 +349,14 @@ clean: $(RM) SubmittingPatches.txt $(RM) $(cmds_txt) $(mergetools_txt) *.made $(RM) manpage-base-url.xsl + $(RM) GIT-ASCIIDOCFLAGS -$(MAN_HTML): %.html : %.txt asciidoc.conf +$(MAN_HTML): %.html : %.txt asciidoc.conf asciidoctor-extensions.rb GIT-ASCIIDOCFLAGS $(QUIET_ASCIIDOC)$(RM) $@+ $@ && \ $(TXT_TO_HTML) -d manpage -o $@+ $< && \ mv $@+ $@ -$(OBSOLETE_HTML): %.html : %.txto asciidoc.conf +$(OBSOLETE_HTML): %.html : %.txto asciidoc.conf asciidoctor-extensions.rb GIT-ASCIIDOCFLAGS $(QUIET_ASCIIDOC)$(RM) $@+ $@ && \ $(TXT_TO_HTML) -o $@+ $< && \ mv $@+ $@ @@ -354,16 +364,16 @@ $(OBSOLETE_HTML): %.html : %.txto asciidoc.conf manpage-base-url.xsl: manpage-base-url.xsl.in $(QUIET_GEN)sed "s|@@MAN_BASE_URL@@|$(MAN_BASE_URL)|" $< > $@ -%.1 %.5 %.7 : %.xml manpage-base-url.xsl +%.1 %.5 %.7 : %.xml manpage-base-url.xsl $(wildcard manpage*.xsl) $(QUIET_XMLTO)$(RM) $@ && \ $(XMLTO) -m $(MANPAGE_XSL) $(XMLTO_EXTRA) man $< -%.xml : %.txt asciidoc.conf +%.xml : %.txt asciidoc.conf asciidoctor-extensions.rb GIT-ASCIIDOCFLAGS $(QUIET_ASCIIDOC)$(RM) $@+ $@ && \ $(TXT_TO_XML) -d manpage -o $@+ $< && \ mv $@+ $@ -user-manual.xml: user-manual.txt user-manual.conf +user-manual.xml: user-manual.txt user-manual.conf asciidoctor-extensions.rb GIT-ASCIIDOCFLAGS $(QUIET_ASCIIDOC)$(RM) $@+ $@ && \ $(TXT_TO_XML) -d book -o $@+ $< && \ mv $@+ $@ @@ -373,7 +383,8 @@ technical/api-index.txt: technical/api-index-skel.txt \ $(QUIET_GEN)cd technical && '$(SHELL_PATH_SQ)' ./api-index.sh technical/%.html: ASCIIDOC_EXTRA += -a git-relative-html-prefix=../ -$(patsubst %,%.html,$(API_DOCS) technical/api-index $(TECH_DOCS)): %.html : %.txt asciidoc.conf +$(patsubst %,%.html,$(API_DOCS) technical/api-index $(TECH_DOCS)): %.html : %.txt \ + asciidoc.conf GIT-ASCIIDOCFLAGS $(QUIET_ASCIIDOC)$(TXT_TO_HTML) $*.txt SubmittingPatches.txt: SubmittingPatches @@ -430,7 +441,7 @@ $(patsubst %,%.html,$(ARTICLES)) : %.html : %.txt WEBDOC_DEST = /pub/software/scm/git/docs howto/%.html: ASCIIDOC_EXTRA += -a git-relative-html-prefix=../ -$(patsubst %.txt,%.html,$(wildcard howto/*.txt)): %.html : %.txt +$(patsubst %.txt,%.html,$(wildcard howto/*.txt)): %.html : %.txt GIT-ASCIIDOCFLAGS $(QUIET_ASCIIDOC)$(RM) $@+ $@ && \ sed -e '1,/^$$/d' $< | \ $(TXT_TO_HTML) - >$@+ && \ diff --git a/Documentation/RelNotes/2.22.0.txt b/Documentation/RelNotes/2.22.0.txt index ca774e8388..d7d230e539 100644 --- a/Documentation/RelNotes/2.22.0.txt +++ b/Documentation/RelNotes/2.22.0.txt @@ -36,6 +36,19 @@ UI, Workflows & Features a merge commit. This has been updated to use a more modern and human readable output that still is concise enough. + * "git rebase --rebase-merges" replaces its old "--preserve-merges" + option; the latter is now marked as deprecated. + + * Error message given while cloning with --recurse-submodules has + been updated. + + * The completion helper code now pays attention to repository-local + configuration (when available), which allows --list-cmds to honour + a repository specific setting of completion.commands, for example. + + * "git mergetool" learned to offer Sublime Merge (smerge) as one of + its backends. + Performance, Internal Implementation, Development Support etc. @@ -55,6 +68,32 @@ Performance, Internal Implementation, Development Support etc. * The command line parser of "git commit-tree" has been rewritten to use the parse-options API. + * Suggest GitGitGadget instead of submitGit as a way to submit + patches based on GitHub PR to us. + + * The test framework has been updated to help developers by making it + easier to run most of the tests under different versions of + over-the-wire protocols. + + * Dev support update to make it easier to compare two formatted + results from our documentation. + + * The scripted "git rebase" implementation has been retired. + + * "git multi-pack-index verify" did not scale well with the number of + packfiles, which is being improved. + + * "git stash" has been rewritten in C. + + * The "check-docs" Makefile target to support developers has been + updated. + + * The tests have been updated not to rely on the abbreviated option + names the parse-options API offers, to protect us from an + abbreviated form of an option that used to be unique within the + command getting non-unique when a new option that share the same + prefix is added. + Fixes since v2.21 ----------------- @@ -134,6 +173,73 @@ Fixes since v2.21 now fixed. (merge cd8e7593b9 jk/config-type-color-ends-with-lf later to maint). + * When the "clean" filter can reduce the size of a huge file in the + working tree down to a small "token" (a la Git LFS), there is no + point in allocating a huge scratch area upfront, but the buffer is + sized based on the original file size. The convert mechanism now + allocates very minimum and reallocates as it receives the output + from the clean filter process. + (merge 02156ab031 jh/resize-convert-scratch-buffer later to maint). + + * "git rebase" uses the refs/rewritten/ hierarchy to store its + intermediate states, which inherently makes the hierarchy per + worktree, but it didn't quite work well. + (merge b9317d55a3 nd/rewritten-ref-is-per-worktree later to maint). + + * "git log -L<from>,<to>:<path>" with "-s" did not suppress the patch + output as it should. This has been corrected. + (merge 05314efaea jk/line-log-with-patch later to maint). + + * "git worktree add" used to do a "find an available name with stat + and then mkdir", which is race-prone. This has been fixed by using + mkdir and reacting to EEXIST in a loop. + (merge 7af01f2367 ms/worktree-add-atomic-mkdir later to maint). + + * Build update for SHA-1 with collision detection. + (merge 07a20f569b jk/sha1dc later to maint). + + * Build procedure has been fixed around use of asciidoctor instead of + asciidoc. + (merge 185f9a0ea0 ma/asciidoctor-fixes later to maint). + + * remote-http transport did not anonymize URLs reported in its error + messages at places. + (merge c1284b21f2 js/anonymize-remote-curl-diag later to maint). + + * Error messages given from the http transport have been updated so + that they can be localized. + (merge ed8b4132c8 js/remote-curl-i18n later to maint). + + * "git init" forgot to read platform-specific repository + configuration, which made Windows port to ignore settings of + core.hidedotfiles, for example. + + * A corner-case object name ambiguity while the sequencer machinery + is working (e.g. "rebase -i -x") has been fixed. + + * "git format-patch" did not diagnose an error while opening the + output file for the cover-letter, which has been corrected. + (merge 2fe95f494c jc/format-patch-error-check later to maint). + + * "git checkout -f <branch>" while the index has an unmerged path + incorrectly left some paths in an unmerged state, which has been + corrected. + + * A corner case bug in the refs API has been corrected. + (merge d3322eb28b jk/refs-double-abort later to maint). + + * Unicode update. + (merge 584b62c37b bb/unicode-12 later to maint). + + * dumb-http walker has been updated to share more error recovery + strategy with the normal codepath. + + * A buglet in configuration parser has been fixed. + (merge 19e7fdaa58 nd/include-if-wildmatch later to maint). + + * The documentation for "git read-tree --reset -u" has been updated. + (merge b5a0bd694c nd/read-tree-reset-doc later to maint). + * Code cleanup, docfix, build fix, etc. (merge 11f470aee7 jc/test-yes-doc later to maint). (merge 90503a240b js/doc-symref-in-proto-v1 later to maint). @@ -148,3 +254,16 @@ Fixes since v2.21 (merge 716a5af812 rd/gc-prune-doc-fix later to maint). (merge 50b206371d js/untravis-windows later to maint). (merge dbf47215e3 js/rebase-recreate-merge later to maint). + (merge 56cb2d30f8 dl/reset-doc-no-wrt-abbrev later to maint). + (merge 64eca306a2 ja/dir-rename-doc-markup-fix later to maint). + (merge af91b0230c dl/ignore-docs later to maint). + (merge 59a06e947b ra/t3600-test-path-funcs later to maint). + (merge e041d0781b ar/t4150-remove-cruft later to maint). + (merge 8d75a1d183 ma/asciidoctor-fixes-more later to maint). + (merge 74cc547b0f mh/pack-protocol-doc-fix later to maint). + (merge ed31851fa6 ab/doc-misc-typofixes later to maint). + (merge a7256debd4 nd/checkout-m-doc-update later to maint). + (merge 3a9e1ad78d jt/t5551-protocol-v2-does-not-have-half-auth later to maint). + (merge 0b918b75af sg/t5318-cleanup later to maint). + (merge 68ed71b53c cb/doco-mono later to maint). + (merge a34dca2451 nd/interpret-trailers-docfix later to maint). diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches index ec8b205145..6d589e118c 100644 --- a/Documentation/SubmittingPatches +++ b/Documentation/SubmittingPatches @@ -372,15 +372,15 @@ such as "Thanks-to:", "Based-on-patch-by:", or "Mentored-by:". Some parts of the system have dedicated maintainers with their own repositories. -- 'git-gui/' comes from git-gui project, maintained by Pat Thoyts: +- `git-gui/` comes from git-gui project, maintained by Pat Thoyts: git://repo.or.cz/git-gui.git -- 'gitk-git/' comes from Paul Mackerras's gitk project: +- `gitk-git/` comes from Paul Mackerras's gitk project: git://ozlabs.org/~paulus/gitk -- 'po/' comes from the localization coordinator, Jiang Xin: +- `po/` comes from the localization coordinator, Jiang Xin: https://github.com/git-l10n/git-po/ diff --git a/Documentation/asciidoctor-extensions.rb b/Documentation/asciidoctor-extensions.rb index ec83b4959e..0089e0cfb8 100644 --- a/Documentation/asciidoctor-extensions.rb +++ b/Documentation/asciidoctor-extensions.rb @@ -11,12 +11,12 @@ module Git def process(parent, target, attrs) if parent.document.basebackend? 'html' prefix = parent.document.attr('git-relative-html-prefix') - %(<a href="#{prefix}#{target}.html">#{target}(#{attrs[1]})</a>\n) + %(<a href="#{prefix}#{target}.html">#{target}(#{attrs[1]})</a>) elsif parent.document.basebackend? 'docbook' "<citerefentry>\n" \ "<refentrytitle>#{target}</refentrytitle>" \ "<manvolnum>#{attrs[1]}</manvolnum>\n" \ - "</citerefentry>\n" + "</citerefentry>" end end end diff --git a/Documentation/config/branch.txt b/Documentation/config/branch.txt index 019d60ede2..8f4b3faadd 100644 --- a/Documentation/config/branch.txt +++ b/Documentation/config/branch.txt @@ -85,9 +85,9 @@ When `merges`, pass the `--rebase-merges` option to 'git rebase' so that the local merge commits are included in the rebase (see linkgit:git-rebase[1] for details). + -When preserve, also pass `--preserve-merges` along to 'git rebase' -so that locally committed merge commits will not be flattened -by running 'git pull'. +When `preserve` (deprecated in favor of `merges`), also pass +`--preserve-merges` along to 'git rebase' so that locally committed merge +commits will not be flattened by running 'git pull'. + When the value is `interactive`, the rebase is run in interactive mode. + diff --git a/Documentation/config/core.txt b/Documentation/config/core.txt index 7e9b6c8f4c..75538d27e7 100644 --- a/Documentation/config/core.txt +++ b/Documentation/config/core.txt @@ -414,7 +414,7 @@ Common unit suffixes of 'k', 'm', or 'g' are supported. core.excludesFile:: Specifies the pathname to the file that contains patterns to describe paths that are not meant to be tracked, in addition - to '.gitignore' (per-directory) and '.git/info/exclude'. + to `.gitignore` (per-directory) and `.git/info/exclude`. Defaults to `$XDG_CONFIG_HOME/git/ignore`. If `$XDG_CONFIG_HOME` is either not set or empty, `$HOME/.config/git/ignore` is used instead. See linkgit:gitignore[5]. @@ -429,8 +429,8 @@ core.askPass:: command-line argument and write the password on its STDOUT. core.attributesFile:: - In addition to '.gitattributes' (per-directory) and - '.git/info/attributes', Git looks into this file for attributes + In addition to `.gitattributes` (per-directory) and + `.git/info/attributes`, Git looks into this file for attributes (see linkgit:gitattributes[5]). Path expansions are made the same way as for `core.excludesFile`. Its default value is `$XDG_CONFIG_HOME/git/attributes`. If `$XDG_CONFIG_HOME` is either not @@ -438,10 +438,10 @@ core.attributesFile:: core.hooksPath:: By default Git will look for your hooks in the - '$GIT_DIR/hooks' directory. Set this to different path, - e.g. '/etc/git/hooks', and Git will try to find your hooks in - that directory, e.g. '/etc/git/hooks/pre-receive' instead of - in '$GIT_DIR/hooks/pre-receive'. + `$GIT_DIR/hooks` directory. Set this to different path, + e.g. `/etc/git/hooks`, and Git will try to find your hooks in + that directory, e.g. `/etc/git/hooks/pre-receive` instead of + in `$GIT_DIR/hooks/pre-receive`. + The path can be either absolute or relative. A relative path is taken as relative to the directory where the hooks are run (see diff --git a/Documentation/config/diff.txt b/Documentation/config/diff.txt index e48bb987d7..2c4c9ba27a 100644 --- a/Documentation/config/diff.txt +++ b/Documentation/config/diff.txt @@ -10,7 +10,7 @@ diff.autoRefreshIndex:: diff.dirstat:: A comma separated list of `--dirstat` parameters specifying the - default behavior of the `--dirstat` option to linkgit:git-diff[1]` + default behavior of the `--dirstat` option to linkgit:git-diff[1] and friends. The defaults can be overridden on the command line (using `--dirstat=<param1,param2,...>`). The fallback defaults (when not changed by `diff.dirstat`) are `changes,noncumulative,3`. @@ -73,7 +73,7 @@ diff.external:: environment variable. The command is called with parameters as described under "git Diffs" in linkgit:git[1]. Note: if you want to use an external diff program only on a subset of - your files, you might want to use linkgit:gitattributes[5] instead. + your files, you might want to use linkgit:gitattributes[5] instead. diff.ignoreSubmodules:: Sets the default value of --ignore-submodules. Note that this diff --git a/Documentation/config/fsck.txt b/Documentation/config/fsck.txt index 879c5a29c4..450e8c38e3 100644 --- a/Documentation/config/fsck.txt +++ b/Documentation/config/fsck.txt @@ -23,9 +23,9 @@ When `fsck.<msg-id>` is set, errors can be switched to warnings and vice versa by configuring the `fsck.<msg-id>` setting where the `<msg-id>` is the fsck message ID and the value is one of `error`, `warn` or `ignore`. For convenience, fsck prefixes the error/warning -with the message ID, e.g. "missingEmail: invalid author/committer line -- missing email" means that setting `fsck.missingEmail = ignore` will -hide that issue. +with the message ID, e.g. "missingEmail: invalid author/committer +line - missing email" means that setting `fsck.missingEmail = ignore` +will hide that issue. + In general, it is better to enumerate existing objects with problems with `fsck.skipList`, instead of listing the kind of breakages these diff --git a/Documentation/config/gc.txt b/Documentation/config/gc.txt index c6fbb8a96f..73c08b0c00 100644 --- a/Documentation/config/gc.txt +++ b/Documentation/config/gc.txt @@ -19,7 +19,7 @@ gc.autoPackLimit:: When there are more than this many packs that are not marked with `*.keep` file in the repository, `git gc --auto` consolidates them into one larger pack. The - default value is 50. Setting this to 0 disables it. + default value is 50. Setting this to 0 disables it. gc.autoDetach:: Make `git gc --auto` return immediately and run in background diff --git a/Documentation/config/gpg.txt b/Documentation/config/gpg.txt index 590fe0d4ba..f999f8ea49 100644 --- a/Documentation/config/gpg.txt +++ b/Documentation/config/gpg.txt @@ -16,5 +16,5 @@ gpg.format:: gpg.<format>.program:: Use this to customize the program used for the signing format you chose. (see `gpg.program` and `gpg.format`) `gpg.program` can still - be used as a legacy synonym for `gpg.openpgp.program`. The default + be used as a legacy synonym for `gpg.openpgp.program`. The default value for `gpg.x509.program` is "gpgsm". diff --git a/Documentation/config/pull.txt b/Documentation/config/pull.txt index bb23a9947d..b87cab31b3 100644 --- a/Documentation/config/pull.txt +++ b/Documentation/config/pull.txt @@ -18,9 +18,9 @@ When `merges`, pass the `--rebase-merges` option to 'git rebase' so that the local merge commits are included in the rebase (see linkgit:git-rebase[1] for details). + -When preserve, also pass `--preserve-merges` along to 'git rebase' -so that locally committed merge commits will not be flattened -by running 'git pull'. +When `preserve` (deprecated in favor of `merges`), also pass +`--preserve-merges` along to 'git rebase' so that locally committed merge +commits will not be flattened by running 'git pull'. + When the value is `interactive`, the rebase is run in interactive mode. + diff --git a/Documentation/config/rebase.txt b/Documentation/config/rebase.txt index 331d250e04..d98e32d812 100644 --- a/Documentation/config/rebase.txt +++ b/Documentation/config/rebase.txt @@ -1,16 +1,9 @@ rebase.useBuiltin:: - Set to `false` to use the legacy shellscript implementation of - linkgit:git-rebase[1]. Is `true` by default, which means use - the built-in rewrite of it in C. -+ -The C rewrite is first included with Git version 2.20. This option -serves an an escape hatch to re-enable the legacy version in case any -bugs are found in the rewrite. This option and the shellscript version -of linkgit:git-rebase[1] will be removed in some future release. -+ -If you find some reason to set this option to `false` other than -one-off testing you should report the behavior difference as a bug in -git. + Unused configuration variable. Used in Git versions 2.20 and + 2.21 as an escape hatch to enable the legacy shellscript + implementation of rebase. Now the built-in rewrite of it in C + is always used. Setting this will emit a warning, to alert any + remaining users that setting this now does nothing. rebase.stat:: Whether to show a diffstat of what changed upstream since the last diff --git a/Documentation/diff-options.txt b/Documentation/diff-options.txt index 5ebc56867b..09faee3b44 100644 --- a/Documentation/diff-options.txt +++ b/Documentation/diff-options.txt @@ -436,7 +436,7 @@ endif::git-format-patch[] --binary:: In addition to `--full-index`, output a binary diff that - can be applied with `git-apply`. + can be applied with `git-apply`. Implies `--patch`. --abbrev[=<n>]:: Instead of showing the full 40-byte hexadecimal object diff --git a/Documentation/doc-diff b/Documentation/doc-diff index 32c83dd26f..3355be4798 100755 --- a/Documentation/doc-diff +++ b/Documentation/doc-diff @@ -12,9 +12,16 @@ OPTIONS_SPEC="\ doc-diff [options] <from> <to> [-- <diff-options>] doc-diff (-c|--clean) -- -j=n parallel argument to pass to make -f force rebuild; do not rely on cached results -c,clean cleanup temporary working files +j=n parallel argument to pass to make +f force rebuild; do not rely on cached results +c,clean cleanup temporary working files +from-asciidoc use asciidoc with the 'from'-commit +from-asciidoctor use asciidoctor with the 'from'-commit +asciidoc use asciidoc with both commits +to-asciidoc use asciidoc with the 'to'-commit +to-asciidoctor use asciidoctor with the 'to'-commit +asciidoctor use asciidoctor with both commits +cut-header-footer cut away header and footer " SUBDIRECTORY_OK=1 . "$(git --exec-path)/git-sh-setup" @@ -22,6 +29,9 @@ SUBDIRECTORY_OK=1 parallel= force= clean= +from_program= +to_program= +cut_header_footer= while test $# -gt 0 do case "$1" in @@ -31,6 +41,22 @@ do clean=t ;; -f) force=t ;; + --from-asciidoctor) + from_program=-asciidoctor ;; + --to-asciidoctor) + to_program=-asciidoctor ;; + --asciidoctor) + from_program=-asciidoctor + to_program=-asciidoctor ;; + --from-asciidoc) + from_program=-asciidoc ;; + --to-asciidoc) + to_program=-asciidoc ;; + --asciidoc) + from_program=-asciidoc + to_program=-asciidoc ;; + --cut-header-footer) + cut_header_footer=-cut-header-footer ;; --) shift; break ;; *) @@ -79,6 +105,22 @@ then ln -s "$dots/config.mak" "$tmp/worktree/config.mak" fi +construct_makemanflags () { + if test "$1" = "-asciidoc" + then + echo USE_ASCIIDOCTOR= + elif test "$1" = "-asciidoctor" + then + echo USE_ASCIIDOCTOR=YesPlease + fi +} + +from_makemanflags=$(construct_makemanflags "$from_program") && +to_makemanflags=$(construct_makemanflags "$to_program") && + +from_dir=$from_oid$from_program$cut_header_footer && +to_dir=$to_oid$to_program$cut_header_footer && + # generate_render_makefile <srcdir> <dstdir> generate_render_makefile () { find "$1" -type f | @@ -94,7 +136,7 @@ generate_render_makefile () { done } -# render_tree <committish_oid> +# render_tree <committish_oid> <directory_name> <makemanflags> render_tree () { # Skip install-man entirely if we already have an installed directory. # We can't rely on make here, since "install-man" unconditionally @@ -102,28 +144,44 @@ render_tree () { # we then can't rely on during the render step). We use "mv" to make # sure we don't get confused by a previous run that failed partway # through. - if ! test -d "$tmp/installed/$1" + oid=$1 && + dname=$2 && + makemanflags=$3 && + if ! test -d "$tmp/installed/$dname" then - git -C "$tmp/worktree" checkout --detach "$1" && + git -C "$tmp/worktree" checkout --detach "$oid" && make -j$parallel -C "$tmp/worktree" \ + $makemanflags \ GIT_VERSION=omitted \ SOURCE_DATE_EPOCH=0 \ - DESTDIR="$tmp/installed/$1+" \ + DESTDIR="$tmp/installed/$dname+" \ install-man && - mv "$tmp/installed/$1+" "$tmp/installed/$1" + mv "$tmp/installed/$dname+" "$tmp/installed/$dname" fi && # As with "installed" above, we skip the render if it's already been # done. So using make here is primarily just about running in # parallel. - if ! test -d "$tmp/rendered/$1" + if ! test -d "$tmp/rendered/$dname" then - generate_render_makefile "$tmp/installed/$1" "$tmp/rendered/$1+" | + generate_render_makefile "$tmp/installed/$dname" \ + "$tmp/rendered/$dname+" | make -j$parallel -f - && - mv "$tmp/rendered/$1+" "$tmp/rendered/$1" + mv "$tmp/rendered/$dname+" "$tmp/rendered/$dname" + + if test "$cut_header_footer" = "-cut-header-footer" + then + for f in $(find "$tmp/rendered/$dname" -type f) + do + tail -n +3 "$f" | head -n -2 | + sed -e '1{/^$/d}' -e '${/^$/d}' >"$f+" && + mv "$f+" "$f" || + return 1 + done + fi fi } -render_tree $from_oid && -render_tree $to_oid && -git -C $tmp/rendered diff --no-index "$@" $from_oid $to_oid +render_tree $from_oid $from_dir $from_makemanflags && +render_tree $to_oid $to_dir $to_makemanflags && +git -C $tmp/rendered diff --no-index "$@" $from_dir $to_dir diff --git a/Documentation/git-add.txt b/Documentation/git-add.txt index 37bcab94d5..8b0e4c7fa8 100644 --- a/Documentation/git-add.txt +++ b/Documentation/git-add.txt @@ -193,15 +193,6 @@ for "git add --no-all <pathspec>...", i.e. ignored removed files. for command-line options). -CONFIGURATION -------------- - -The optional configuration variable `core.excludesFile` indicates a path to a -file containing patterns of file names to exclude from git-add, similar to -$GIT_DIR/info/exclude. Patterns in the exclude file are used in addition to -those in info/exclude. See linkgit:gitignore[5]. - - EXAMPLES -------- diff --git a/Documentation/git-am.txt b/Documentation/git-am.txt index 6f6c34b0f4..fc3b993c33 100644 --- a/Documentation/git-am.txt +++ b/Documentation/git-am.txt @@ -99,6 +99,11 @@ default. You can use `--no-utf8` to override this. am.threeWay configuration variable. For more information, see am.threeWay in linkgit:git-config[1]. +--rerere-autoupdate:: +--no-rerere-autoupdate:: + Allow the rerere mechanism to update the index with the + result of auto-conflict resolution if possible. + --ignore-space-change:: --ignore-whitespace:: --whitespace=<option>:: diff --git a/Documentation/git-checkout.txt b/Documentation/git-checkout.txt index f179b43732..877e5f503a 100644 --- a/Documentation/git-checkout.txt +++ b/Documentation/git-checkout.txt @@ -242,6 +242,8 @@ should result in deletion of the path). + When checking out paths from the index, this option lets you recreate the conflicted merge in the specified paths. ++ +When switching branches with `--merge`, staged changes may be lost. --conflict=<style>:: The same as --merge option above, but changes the way the diff --git a/Documentation/git-cherry-pick.txt b/Documentation/git-cherry-pick.txt index b8cfeec67e..d64e72462f 100644 --- a/Documentation/git-cherry-pick.txt +++ b/Documentation/git-cherry-pick.txt @@ -148,6 +148,11 @@ effect to your index in a row. Pass the merge strategy-specific option through to the merge strategy. See linkgit:git-merge[1] for details. +--rerere-autoupdate:: +--no-rerere-autoupdate:: + Allow the rerere mechanism to update the index with the + result of auto-conflict resolution if possible. + SEQUENCER SUBCOMMANDS --------------------- include::sequencer.txt[] diff --git a/Documentation/git-clean.txt b/Documentation/git-clean.txt index 03056dad0d..db876f7dde 100644 --- a/Documentation/git-clean.txt +++ b/Documentation/git-clean.txt @@ -55,14 +55,13 @@ OPTIONS -e <pattern>:: --exclude=<pattern>:: - In addition to those found in .gitignore (per directory) and - $GIT_DIR/info/exclude, also consider these patterns to be in the - set of the ignore rules in effect. + Use the given exclude pattern in addition to the standard ignore rules + (see linkgit:gitignore[5]). -x:: - Don't use the standard ignore rules read from .gitignore (per - directory) and $GIT_DIR/info/exclude, but do still use the ignore - rules given with `-e` options. This allows removing all untracked + Don't use the standard ignore rules (see linkgit:gitignore[5]), but + still use the ignore rules given with `-e` options from the command + line. This allows removing all untracked files, including build products. This can be used (possibly in conjunction with 'git reset') to create a pristine working directory to test a clean build. diff --git a/Documentation/git-config.txt b/Documentation/git-config.txt index d0b9c50d20..ff9310f958 100644 --- a/Documentation/git-config.txt +++ b/Documentation/git-config.txt @@ -126,7 +126,7 @@ See also <<FILES>>. --local:: For writing options: write to the repository `.git/config` file. - This is the default behavior. + This is the default behavior. + For reading options: read only from the repository `.git/config` rather than from all available files. diff --git a/Documentation/git-daemon.txt b/Documentation/git-daemon.txt index 56d54a4898..fdc28c041c 100644 --- a/Documentation/git-daemon.txt +++ b/Documentation/git-daemon.txt @@ -57,7 +57,7 @@ OPTIONS This is sort of "Git root" - if you run 'git daemon' with '--base-path=/srv/git' on example.com, then if you later try to pull 'git://example.com/hello.git', 'git daemon' will interpret the path - as '/srv/git/hello.git'. + as `/srv/git/hello.git`. --base-path-relaxed:: If --base-path is enabled and repo lookup fails, with this option diff --git a/Documentation/git-diff-tree.txt b/Documentation/git-diff-tree.txt index 24f32e8c54..5c8a2a5e97 100644 --- a/Documentation/git-diff-tree.txt +++ b/Documentation/git-diff-tree.txt @@ -118,6 +118,7 @@ include::pretty-options.txt[] include::pretty-formats.txt[] + include::diff-format.txt[] GIT diff --git a/Documentation/git-filter-branch.txt b/Documentation/git-filter-branch.txt index e6f08ab189..6b53dd7e06 100644 --- a/Documentation/git-filter-branch.txt +++ b/Documentation/git-filter-branch.txt @@ -189,7 +189,7 @@ to other tags will be rewritten to point to the underlying commit. rewriting. When applying a tree filter, the command needs to temporarily check out the tree to some directory, which may consume considerable space in case of large projects. By default it - does this in the '.git-rewrite/' directory but you can override + does this in the `.git-rewrite/` directory but you can override that choice by this parameter. -f:: diff --git a/Documentation/git-grep.txt b/Documentation/git-grep.txt index 84fe236a8e..2d27969057 100644 --- a/Documentation/git-grep.txt +++ b/Documentation/git-grep.txt @@ -88,7 +88,7 @@ OPTIONS mechanism. Only useful with `--untracked`. --exclude-standard:: - Do not pay attention to ignored files specified via the `.gitignore` + Do not pay attention to ignored files specified via the `.gitignore` mechanism. Only useful when searching files in the current directory with `--no-index`. diff --git a/Documentation/git-help.txt b/Documentation/git-help.txt index c318bf87e1..f71db0daa2 100644 --- a/Documentation/git-help.txt +++ b/Documentation/git-help.txt @@ -171,8 +171,8 @@ variable, we launch 'kfmclient' to try to open the man page on an already opened konqueror in a new tab if possible. For consistency, we also try such a trick if 'man.konqueror.path' is -set to something like 'A_PATH_TO/konqueror'. That means we will try to -launch 'A_PATH_TO/kfmclient' instead. +set to something like `A_PATH_TO/konqueror`. That means we will try to +launch `A_PATH_TO/kfmclient` instead. If you really want to use 'konqueror', then you can use something like the following: diff --git a/Documentation/git-http-backend.txt b/Documentation/git-http-backend.txt index bb0db195ce..558966aa83 100644 --- a/Documentation/git-http-backend.txt +++ b/Documentation/git-http-backend.txt @@ -162,7 +162,7 @@ ScriptAliasMatch ^/git/[^/]*(.*) /usr/libexec/git-core/git-http-backend/storage. Accelerated static Apache 2.x:: Similar to the above, but Apache can be used to return static - files that are stored on disk. On many systems this may + files that are stored on disk. On many systems this may be more efficient as Apache can ask the kernel to copy the file contents from the file system directly to the network: + diff --git a/Documentation/git-interpret-trailers.txt b/Documentation/git-interpret-trailers.txt index a5e8b36f62..96ec6499f0 100644 --- a/Documentation/git-interpret-trailers.txt +++ b/Documentation/git-interpret-trailers.txt @@ -3,7 +3,7 @@ git-interpret-trailers(1) NAME ---- -git-interpret-trailers - add or parse structured information in commit messages +git-interpret-trailers - Add or parse structured information in commit messages SYNOPSIS -------- diff --git a/Documentation/git-ls-remote.txt b/Documentation/git-ls-remote.txt index b9fd3770a6..0b057cbb10 100644 --- a/Documentation/git-ls-remote.txt +++ b/Documentation/git-ls-remote.txt @@ -31,7 +31,7 @@ OPTIONS displayed. --refs:: - Do not show peeled tags or pseudorefs like HEAD in the output. + Do not show peeled tags or pseudorefs like `HEAD` in the output. -q:: --quiet:: diff --git a/Documentation/git-ls-tree.txt b/Documentation/git-ls-tree.txt index 9dee7bef35..a7515714da 100644 --- a/Documentation/git-ls-tree.txt +++ b/Documentation/git-ls-tree.txt @@ -27,9 +27,9 @@ in the current working directory. Note that: taken as relative to the current working directory. E.g. when you are in a directory 'sub' that has a directory 'dir', you can run 'git ls-tree -r HEAD dir' to list the contents of the tree (that is - 'sub/dir' in `HEAD`). You don't want to give a tree that is not at the + `sub/dir` in `HEAD`). You don't want to give a tree that is not at the root level (e.g. `git ls-tree -r HEAD:sub dir`) in this case, as that - would result in asking for 'sub/sub/dir' in the `HEAD` commit. + would result in asking for `sub/sub/dir` in the `HEAD` commit. However, the current working directory can be ignored by passing --full-tree option. diff --git a/Documentation/git-merge.txt b/Documentation/git-merge.txt index 4cc86469f3..6294dbc09d 100644 --- a/Documentation/git-merge.txt +++ b/Documentation/git-merge.txt @@ -83,7 +83,8 @@ invocations. The automated message can include the branch description. If `--log` is specified, a shortlog of the commits being merged will be appended to the specified message. ---[no-]rerere-autoupdate:: +--rerere-autoupdate:: +--no-rerere-autoupdate:: Allow the rerere mechanism to update the index with the result of auto-conflict resolution if possible. diff --git a/Documentation/git-notes.txt b/Documentation/git-notes.txt index df2b64dbb6..f56a5a9197 100644 --- a/Documentation/git-notes.txt +++ b/Documentation/git-notes.txt @@ -146,7 +146,7 @@ OPTIONS -C <object>:: --reuse-message=<object>:: - Take the given blob object (for example, another note) as the + Take the given blob object (for example, another note) as the note message. (Use `git notes copy <object>` instead to copy notes between objects.) diff --git a/Documentation/git-read-tree.txt b/Documentation/git-read-tree.txt index 1e81f9c4e6..d271842608 100644 --- a/Documentation/git-read-tree.txt +++ b/Documentation/git-read-tree.txt @@ -38,8 +38,9 @@ OPTIONS started. --reset:: - Same as -m, except that unmerged entries are discarded - instead of failing. + Same as -m, except that unmerged entries are discarded instead + of failing. When used with `-u`, updates leading to loss of + working tree changes will not abort the operation. -u:: After a successful merge, update the files in the work diff --git a/Documentation/git-rebase.txt b/Documentation/git-rebase.txt index 6363d674b7..f5e6ae3907 100644 --- a/Documentation/git-rebase.txt +++ b/Documentation/git-rebase.txt @@ -300,6 +300,11 @@ See also INCOMPATIBLE OPTIONS below. + See also INCOMPATIBLE OPTIONS below. +--rerere-autoupdate:: +--no-rerere-autoupdate:: + Allow the rerere mechanism to update the index with the + result of auto-conflict resolution if possible. + -S[<keyid>]:: --gpg-sign[=<keyid>]:: GPG-sign commits. The `keyid` argument is optional and @@ -415,9 +420,9 @@ i.e. commits that would be excluded by linkgit:git-log[1]'s the `rebase-cousins` mode is turned on, such commits are instead rebased onto `<upstream>` (or `<onto>`, if specified). + -The `--rebase-merges` mode is similar in spirit to `--preserve-merges`, but -in contrast to that option works well in interactive rebases: commits can be -reordered, inserted and dropped at will. +The `--rebase-merges` mode is similar in spirit to the deprecated +`--preserve-merges`, but in contrast to that option works well in interactive +rebases: commits can be reordered, inserted and dropped at will. + It is currently only possible to recreate the merge commits using the `recursive` merge strategy; Different merge strategies can be used only via @@ -427,9 +432,10 @@ See also REBASING MERGES and INCOMPATIBLE OPTIONS below. -p:: --preserve-merges:: - Recreate merge commits instead of flattening the history by replaying - commits a merge commit introduces. Merge conflict resolutions or manual - amendments to merge commits are not preserved. + [DEPRECATED: use `--rebase-merges` instead] Recreate merge commits + instead of flattening the history by replaying commits a merge commit + introduces. Merge conflict resolutions or manual amendments to merge + commits are not preserved. + This uses the `--interactive` machinery internally, but combining it with the `--interactive` option explicitly is generally not a good @@ -1020,11 +1026,11 @@ merge cmake BUGS ---- -The todo list presented by `--preserve-merges --interactive` does not -represent the topology of the revision graph. Editing commits and -rewording their commit messages should work fine, but attempts to -reorder commits tend to produce counterintuitive results. Use -`--rebase-merges` in such scenarios instead. +The todo list presented by the deprecated `--preserve-merges --interactive` +does not represent the topology of the revision graph (use `--rebase-merges` +instead). Editing commits and rewording their commit messages should work +fine, but attempts to reorder commits tend to produce counterintuitive results. +Use `--rebase-merges` in such scenarios instead. For example, an attempt to rearrange ------------ diff --git a/Documentation/git-remote-ext.txt b/Documentation/git-remote-ext.txt index 3fc5d94336..88ea7e1cc0 100644 --- a/Documentation/git-remote-ext.txt +++ b/Documentation/git-remote-ext.txt @@ -104,7 +104,7 @@ begins with `ext::`. Examples: link-level address). "ext::git-server-alias foo %G/repo% with% spaces %Vfoo":: - Represents a repository with path '/repo with spaces' accessed + Represents a repository with path `/repo with spaces` accessed using the helper program "git-server-alias foo". The hostname for the remote server passed in the protocol stream will be "foo" (this allows multiple virtual Git servers to share a @@ -118,7 +118,7 @@ begins with `ext::`. Examples: SEE ALSO -------- -linkgit:gitremote-helpers[1] +linkgit:gitremote-helpers[7] GIT --- diff --git a/Documentation/git-remote-fd.txt b/Documentation/git-remote-fd.txt index 80afca866c..0451ceb8a2 100644 --- a/Documentation/git-remote-fd.txt +++ b/Documentation/git-remote-fd.txt @@ -52,7 +52,7 @@ EXAMPLES SEE ALSO -------- -linkgit:gitremote-helpers[1] +linkgit:gitremote-helpers[7] GIT --- diff --git a/Documentation/git-remote-helpers.txto b/Documentation/git-remote-helpers.txto index 49233f5d26..6f353ebfd3 100644 --- a/Documentation/git-remote-helpers.txto +++ b/Documentation/git-remote-helpers.txto @@ -1,7 +1,7 @@ git-remote-helpers ================== -This document has been moved to linkgit:gitremote-helpers[1]. +This document has been moved to linkgit:gitremote-helpers[7]. Please let the owners of the referring site know so that they can update the link you clicked to get here. diff --git a/Documentation/git-remote-testgit.txt b/Documentation/git-remote-testgit.txt deleted file mode 100644 index f791d73c05..0000000000 --- a/Documentation/git-remote-testgit.txt +++ /dev/null @@ -1,30 +0,0 @@ -git-remote-testgit(1) -===================== - -NAME ----- -git-remote-testgit - Example remote-helper - - -SYNOPSIS --------- -[verse] -git clone testgit::<source-repo> [<destination>] - -DESCRIPTION ------------ - -This command is a simple remote-helper, that is used both as a -testcase for the remote-helper functionality, and as an example to -show remote-helper authors one possible implementation. - -The best way to learn more is to read the comments and source code in -'git-remote-testgit'. - -SEE ALSO --------- -linkgit:gitremote-helpers[1] - -GIT ---- -Part of the linkgit:git[1] suite diff --git a/Documentation/git-reset.txt b/Documentation/git-reset.txt index 132f8e55f6..26e746c53f 100644 --- a/Documentation/git-reset.txt +++ b/Documentation/git-reset.txt @@ -428,8 +428,8 @@ working index HEAD target working index HEAD `reset --merge` is meant to be used when resetting out of a conflicted merge. Any mergy operation guarantees that the working tree file that is -involved in the merge does not have local change wrt the index before -it starts, and that it writes the result out to the working tree. So if +involved in the merge does not have a local change with respect to the index +before it starts, and that it writes the result out to the working tree. So if we see some difference between the index and the target and also between the index and the working tree, then it means that we are not resetting out from a state that a mergy operation left after failing diff --git a/Documentation/git-revert.txt b/Documentation/git-revert.txt index 837707a8fd..6afccb2f1e 100644 --- a/Documentation/git-revert.txt +++ b/Documentation/git-revert.txt @@ -101,6 +101,11 @@ effect to your index in a row. Pass the merge strategy-specific option through to the merge strategy. See linkgit:git-merge[1] for details. +--rerere-autoupdate:: +--no-rerere-autoupdate:: + Allow the rerere mechanism to update the index with the + result of auto-conflict resolution if possible. + SEQUENCER SUBCOMMANDS --------------------- include::sequencer.txt[] diff --git a/Documentation/git-stash.txt b/Documentation/git-stash.txt index 7ef8c47911..e31ea7d303 100644 --- a/Documentation/git-stash.txt +++ b/Documentation/git-stash.txt @@ -9,7 +9,7 @@ SYNOPSIS -------- [verse] 'git stash' list [<options>] -'git stash' show [<stash>] +'git stash' show [<options>] [<stash>] 'git stash' drop [-q|--quiet] [<stash>] 'git stash' ( pop | apply ) [--index] [-q|--quiet] [<stash>] 'git stash' branch <branchname> [<stash>] @@ -106,7 +106,7 @@ stash@{1}: On master: 9cc0589... Add git-stash The command takes options applicable to the 'git log' command to control what is shown and how. See linkgit:git-log[1]. -show [<stash>]:: +show [<options>] [<stash>]:: Show the changes recorded in the stash entry as a diff between the stashed contents and the commit back when the stash entry was first diff --git a/Documentation/git-status.txt b/Documentation/git-status.txt index 861d821d7f..d4e8f24f0c 100644 --- a/Documentation/git-status.txt +++ b/Documentation/git-status.txt @@ -278,7 +278,8 @@ Header lines start with "#" and are added in response to specific command line arguments. Parsers should ignore headers they don't recognize. -### Branch Headers +Branch Headers +^^^^^^^^^^^^^^ If `--branch` is given, a series of header lines are printed with information about the current branch. @@ -294,7 +295,8 @@ Line Notes ------------------------------------------------------------ .... -### Changed Tracked Entries +Changed Tracked Entries +^^^^^^^^^^^^^^^^^^^^^^^ Following the headers, a series of lines are printed for tracked entries. One of three different line formats may be used to describe @@ -365,7 +367,8 @@ Field Meaning -------------------------------------------------------- .... -### Other Items +Other Items +^^^^^^^^^^^ Following the tracked entries (and if requested), a series of lines will be printed for untracked and then ignored items @@ -379,7 +382,8 @@ Ignored items have the following format: ! <path> -### Pathname Format Notes and -z +Pathname Format Notes and -z +^^^^^^^^^^^^^^^^^^^^^^^^^^^^ When the `-z` option is given, pathnames are printed as is and without any quoting and lines are terminated with a NUL (ASCII 0x00) diff --git a/Documentation/git-submodule.txt b/Documentation/git-submodule.txt index 2794e29780..ac8c6879dd 100644 --- a/Documentation/git-submodule.txt +++ b/Documentation/git-submodule.txt @@ -42,7 +42,7 @@ This may be either an absolute URL, or (if it begins with ./ or ../), the location relative to the superproject's default remote repository (Please note that to specify a repository 'foo.git' which is located right next to a superproject 'bar.git', you'll -have to use '../foo.git' instead of './foo.git' - as one might expect +have to use `../foo.git` instead of `./foo.git` - as one might expect when following the rules for relative URLs - because the evaluation of relative URLs in Git is identical to that of relative directories). + diff --git a/Documentation/git-svn.txt b/Documentation/git-svn.txt index b99029520d..223788fa3e 100644 --- a/Documentation/git-svn.txt +++ b/Documentation/git-svn.txt @@ -126,7 +126,7 @@ your Perl's Getopt::Long is < v2.37). command-line argument. + This automatically updates the rev_map if needed (see -'$GIT_DIR/svn/\*\*/.rev_map.*' in the FILES section below for details). +'$GIT_DIR/svn/\**/.rev_map.*' in the FILES section below for details). --localtime;; Store Git commit times in the local time zone instead of UTC. This @@ -239,7 +239,7 @@ Like 'git rebase'; this requires that the working tree be clean and have no uncommitted changes. + This automatically updates the rev_map if needed (see -'$GIT_DIR/svn/\*\*/.rev_map.*' in the FILES section below for details). +'$GIT_DIR/svn/\**/.rev_map.*' in the FILES section below for details). -l;; --local;; @@ -524,7 +524,7 @@ This will set the property 'svn:keywords' to 'FreeBSD=%H' for the file way to repair the repo is to use 'reset'. + Only the rev_map and refs/remotes/git-svn are changed (see -'$GIT_DIR/svn/\*\*/.rev_map.*' in the FILES section below for details). +'$GIT_DIR/svn/\**/.rev_map.*' in the FILES section below for details). Follow 'reset' with a 'fetch' and then 'git reset' or 'git rebase' to move local branches onto the new tree. @@ -760,7 +760,7 @@ svn-remote.<name>.noMetadata:: + This option can only be used for one-shot imports as 'git svn' will not be able to fetch again without metadata. Additionally, -if you lose your '$GIT_DIR/svn/\*\*/.rev_map.*' files, 'git svn' will not +if you lose your '$GIT_DIR/svn/\**/.rev_map.*' files, 'git svn' will not be able to rebuild them. + The 'git svn log' command will not work on repositories using @@ -1154,7 +1154,7 @@ fetching, then $GIT_DIR/svn/.metadata must be manually edited to remove FILES ----- -$GIT_DIR/svn/\*\*/.rev_map.*:: +$GIT_DIR/svn/\**/.rev_map.*:: Mapping between Subversion revision numbers and Git commit names. In a repository where the noMetadata option is not set, this can be rebuilt from the git-svn-id: lines that are at the diff --git a/Documentation/git-web--browse.txt b/Documentation/git-web--browse.txt index fd952a5ff9..8d162b56c5 100644 --- a/Documentation/git-web--browse.txt +++ b/Documentation/git-web--browse.txt @@ -92,8 +92,8 @@ configuration variable, we launch 'kfmclient' to try to open the HTML man page on an already opened konqueror in a new tab if possible. For consistency, we also try such a trick if 'browser.konqueror.path' is -set to something like 'A_PATH_TO/konqueror'. That means we will try to -launch 'A_PATH_TO/kfmclient' instead. +set to something like `A_PATH_TO/konqueror`. That means we will try to +launch `A_PATH_TO/kfmclient` instead. If you really want to use 'konqueror', then you can use something like the following: diff --git a/Documentation/git-worktree.txt b/Documentation/git-worktree.txt index cb86318f3e..85d92c9761 100644 --- a/Documentation/git-worktree.txt +++ b/Documentation/git-worktree.txt @@ -213,7 +213,7 @@ refs of one working tree from another. In general, all pseudo refs are per working tree and all refs starting with "refs/" are shared. Pseudo refs are ones like HEAD which are -directly under GIT_DIR instead of inside GIT_DIR/refs. There are one +directly under GIT_DIR instead of inside GIT_DIR/refs. There is one exception to this: refs inside refs/bisect and refs/worktree is not shared. diff --git a/Documentation/git.txt b/Documentation/git.txt index 00156d64aa..6d1f2fd9ae 100644 --- a/Documentation/git.txt +++ b/Documentation/git.txt @@ -536,7 +536,6 @@ other The command-line parameters passed to the configured command are determined by the ssh variant. See `ssh.variant` option in linkgit:git-config[1] for details. - + `$GIT_SSH_COMMAND` takes precedence over `$GIT_SSH`, and is interpreted by the shell, which allows additional arguments to be included. diff --git a/Documentation/gitattributes.txt b/Documentation/gitattributes.txt index bdd11a2ddd..4fb20cd0e9 100644 --- a/Documentation/gitattributes.txt +++ b/Documentation/gitattributes.txt @@ -18,7 +18,7 @@ A `gitattributes` file is a simple text file that gives Each line in `gitattributes` file is of form: - pattern attr1 attr2 ... + pattern attr1 attr2 ... That is, a pattern followed by an attributes list, separated by whitespaces. Leading and trailing whitespaces are @@ -314,8 +314,8 @@ stored as UTF-8 internally. A client without `working-tree-encoding` support will checkout `foo.ps1` as UTF-8 encoded file. This will typically cause trouble for the users of this file. + -If a Git client, that does not support the `working-tree-encoding` -attribute, adds a new file `bar.ps1`, then `bar.ps1` will be +If a Git client that does not support the `working-tree-encoding` +attribute adds a new file `bar.ps1`, then `bar.ps1` will be stored "as-is" internally (in this example probably as UTF-16). A client with `working-tree-encoding` support will interpret the internal contents as UTF-8 and try to convert it to UTF-16 on checkout. diff --git a/Documentation/githooks.txt b/Documentation/githooks.txt index 5bf653c111..786e778ab8 100644 --- a/Documentation/githooks.txt +++ b/Documentation/githooks.txt @@ -496,6 +496,24 @@ This hook is invoked by `git-p4 submit`. It takes no parameters and nothing from standard input. Exiting with non-zero status from this script prevent `git-p4 submit` from launching. Run `git-p4 submit --help` for details. +post-index-change +~~~~~~~~~~~~~~~~~ + +This hook is invoked when the index is written in read-cache.c +do_write_locked_index. + +The first parameter passed to the hook is the indicator for the +working directory being updated. "1" meaning working directory +was updated or "0" when the working directory was not updated. + +The second parameter passed to the hook is the indicator for whether +or not the index was updated and the skip-worktree bit could have +changed. "1" meaning skip-worktree bits could have been updated +and "0" meaning they were not. + +Only one parameter should be set to "1" when the hook runs. The hook +running passing "1", "1" should not be possible. + GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/gitignore.txt b/Documentation/gitignore.txt index 1c94f08ff4..b5bc9dbff0 100644 --- a/Documentation/gitignore.txt +++ b/Documentation/gitignore.txt @@ -132,6 +132,14 @@ full pathname may have special meaning: - Other consecutive asterisks are considered regular asterisks and will match according to the previous rules. +CONFIGURATION +------------- + +The optional configuration variable `core.excludesFile` indicates a path to a +file containing patterns of file names to exclude, similar to +`$GIT_DIR/info/exclude`. Patterns in the exclude file are used in addition to +those in `$GIT_DIR/info/exclude`. + NOTES ----- diff --git a/Documentation/gitk.txt b/Documentation/gitk.txt index 244cd01493..1eabb0aaf3 100644 --- a/Documentation/gitk.txt +++ b/Documentation/gitk.txt @@ -168,12 +168,12 @@ Files ----- User configuration and preferences are stored at: -* '$XDG_CONFIG_HOME/git/gitk' if it exists, otherwise -* '$HOME/.gitk' if it exists +* `$XDG_CONFIG_HOME/git/gitk` if it exists, otherwise +* `$HOME/.gitk` if it exists -If neither of the above exist then '$XDG_CONFIG_HOME/git/gitk' is created and +If neither of the above exist then `$XDG_CONFIG_HOME/git/gitk` is created and used by default. If '$XDG_CONFIG_HOME' is not set it defaults to -'$HOME/.config' in all cases. +`$HOME/.config` in all cases. History ------- diff --git a/Documentation/gitmodules.txt b/Documentation/gitmodules.txt index 312b6f9259..a66e95b70c 100644 --- a/Documentation/gitmodules.txt +++ b/Documentation/gitmodules.txt @@ -115,7 +115,7 @@ Consider the following .gitmodules file: This defines two submodules, `libfoo` and `libbar`. These are expected to -be checked out in the paths 'include/foo' and 'include/bar', and for both +be checked out in the paths `include/foo` and `include/bar`, and for both submodules a URL is specified which can be used for cloning the submodules. SEE ALSO diff --git a/Documentation/gitremote-helpers.txt b/Documentation/gitremote-helpers.txt index 9d1459aac6..43f80c8068 100644 --- a/Documentation/gitremote-helpers.txt +++ b/Documentation/gitremote-helpers.txt @@ -1,4 +1,4 @@ -gitremote-helpers(1) +gitremote-helpers(7) ==================== NAME @@ -468,7 +468,7 @@ set by Git if the remote helper has the 'option' capability. 'option dry-run' {'true'|'false'}: If true, pretend the operation completed successfully, - but don't actually change any repository data. For most + but don't actually change any repository data. For most helpers this only applies to the 'push', if supported. 'option servpath <c-style-quoted-path>':: @@ -513,8 +513,6 @@ linkgit:git-remote-ext[1] linkgit:git-remote-fd[1] -linkgit:git-remote-testgit[1] - linkgit:git-fast-import[1] GIT diff --git a/Documentation/gitrepository-layout.txt b/Documentation/gitrepository-layout.txt index 366dee238c..216b11ee88 100644 --- a/Documentation/gitrepository-layout.txt +++ b/Documentation/gitrepository-layout.txt @@ -84,7 +84,7 @@ objects/info/alternates:: to the object database, not to the repository!) in your alternates file, but it will not work if you use absolute paths unless the absolute path in filesystem and web URL - is the same. See also 'objects/info/http-alternates'. + is the same. See also `objects/info/http-alternates`. objects/info/http-alternates:: This file records URLs to alternate object stores that diff --git a/Documentation/gitweb.conf.txt b/Documentation/gitweb.conf.txt index 92535dbac5..35317e71c8 100644 --- a/Documentation/gitweb.conf.txt +++ b/Documentation/gitweb.conf.txt @@ -50,11 +50,11 @@ following order: * built-in values (some set during build stage), * common system-wide configuration file (defaults to - '/etc/gitweb-common.conf'), + `/etc/gitweb-common.conf`), * either per-instance configuration file (defaults to 'gitweb_config.perl' in the same directory as the installed gitweb), or if it does not exists - then fallback system-wide configuration file (defaults to '/etc/gitweb.conf'). + then fallback system-wide configuration file (defaults to `/etc/gitweb.conf`). Values obtained in later configuration files override values obtained earlier in the above sequence. @@ -82,7 +82,7 @@ You can include other configuration file using read_config_file() subroutine. For example, one might want to put gitweb configuration related to access control for viewing repositories via Gitolite (one of Git repository management tools) in a separate file, e.g. in -'/etc/gitweb-gitolite.conf'. To include it, put +`/etc/gitweb-gitolite.conf`. To include it, put -------------------------------------------------- read_config_file("/etc/gitweb-gitolite.conf"); @@ -142,7 +142,7 @@ and its path_info based equivalent http://git.example.com/gitweb.cgi/foo/bar.git ------------------------------------------------ + -will map to the path '/srv/git/foo/bar.git' on the filesystem. +will map to the path `/srv/git/foo/bar.git` on the filesystem. $projects_list:: Name of a plain text file listing projects, or a name of directory @@ -234,9 +234,9 @@ $GIT:: $mimetypes_file:: File to use for (filename extension based) guessing of MIME types before - trying '/etc/mime.types'. *NOTE* that this path, if relative, is taken + trying `/etc/mime.types`. *NOTE* that this path, if relative, is taken as relative to the current Git repository, not to CGI script. If unset, - only '/etc/mime.types' is used (if present on filesystem). If no mimetypes + only `/etc/mime.types` is used (if present on filesystem). If no mimetypes file is found, mimetype guessing based on extension of file is disabled. Unset by default. @@ -297,8 +297,8 @@ relative to base URI of gitweb. + This list should contain the URI of gitweb's standard stylesheet. The default URI of gitweb stylesheet can be set at build time using the `GITWEB_CSS` -makefile variable. Its default value is 'static/gitweb.css' -(or 'static/gitweb.min.css' if the `CSSMIN` variable is defined, +makefile variable. Its default value is `static/gitweb.css` +(or `static/gitweb.min.css` if the `CSSMIN` variable is defined, i.e. if CSS minifier is used during build). + *Note*: there is also a legacy `$stylesheet` configuration variable, which was @@ -311,7 +311,7 @@ $logo:: is displayed in the top right corner of each gitweb page and used as a logo for the Atom feed. Relative to the base URI of gitweb (as a path). Can be adjusted when building gitweb using `GITWEB_LOGO` variable - By default set to 'static/git-logo.png'. + By default set to `static/git-logo.png`. $favicon:: Points to the location where you put 'git-favicon.png' on your web @@ -320,7 +320,7 @@ $favicon:: may display them in the browser's URL bar and next to the site name in bookmarks. Relative to the base URI of gitweb. Can be adjusted at build time using `GITWEB_FAVICON` variable. - By default set to 'static/git-favicon.png'. + By default set to `static/git-favicon.png`. $javascript:: Points to the location where you put 'gitweb.js' on your web server, @@ -328,7 +328,7 @@ $javascript:: Relative to the base URI of gitweb. Can be set at build time using the `GITWEB_JS` build-time configuration variable. + -The default value is either 'static/gitweb.js', or 'static/gitweb.min.js' if +The default value is either `static/gitweb.js`, or `static/gitweb.min.js` if the `JSMIN` build variable was defined, i.e. if JavaScript minifier was used at build time. *Note* that this single file is generated from multiple individual JavaScript "modules". @@ -444,7 +444,7 @@ $default_blob_plain_mimetype:: doesn't result in some other type; by default "text/plain". Gitweb guesses mimetype of a file to display based on extension of its filename, using `$mimetypes_file` (if set and file exists) - and '/etc/mime.types' files (see *mime.types*(5) manpage; only + and `/etc/mime.types` files (see *mime.types*(5) manpage; only filename extension rules are supported by gitweb). $default_text_plain_charset:: @@ -486,7 +486,7 @@ affects how "summary" pages look like, or load limiting). (for example one for `git://` protocol, and one for `http://` protocol). + -Note that per repository configuration can be set in '$GIT_DIR/cloneurl' +Note that per repository configuration can be set in `$GIT_DIR/cloneurl` file, or as values of multi-value `gitweb.url` configuration variable in project config. Per-repository configuration takes precedence over value composed from `@git_base_url_list` elements and project name. @@ -520,7 +520,7 @@ $maxload:: If the server load exceeds this value then gitweb will return "503 Service Unavailable" error. The server load is taken to be 0 if gitweb cannot determine its value. Currently it works only on Linux, - where it uses '/proc/loadavg'; the load there is the number of active + where it uses `/proc/loadavg`; the load there is the number of active tasks on the system -- processes that are actually running -- averaged over the last minute. + @@ -536,7 +536,7 @@ $omit_owner:: $per_request_config:: If this is set to code reference, it will be run once for each request. - You can set parts of configuration that change per session this way. + You can set parts of configuration that change per session this way. For example, one might use the following code in a gitweb configuration file + @@ -739,7 +739,7 @@ Currently available providers are *"gravatar"* and *"picon"*. Only one provider at a time can be selected ('default' is one element list). If an unknown provider is specified, the feature is disabled. *Note* that some providers might require extra Perl packages to be -installed; see 'gitweb/INSTALL' for more details. +installed; see `gitweb/INSTALL` for more details. + This feature can be configured on a per-repository basis via repository's `gitweb.avatar` configuration variable. diff --git a/Documentation/gitweb.txt b/Documentation/gitweb.txt index 88450589af..c7436098c9 100644 --- a/Documentation/gitweb.txt +++ b/Documentation/gitweb.txt @@ -36,7 +36,7 @@ browsed using gitweb itself. CONFIGURATION ------------- Various aspects of gitweb's behavior can be controlled through the configuration -file 'gitweb_config.perl' or '/etc/gitweb.conf'. See the linkgit:gitweb.conf[5] +file `gitweb_config.perl` or `/etc/gitweb.conf`. See the linkgit:gitweb.conf[5] for details. Repositories @@ -51,7 +51,7 @@ projects' root" subsection). our $projectroot = '/path/to/parent/directory'; ----------------------------------------------------------------------- -The default value for `$projectroot` is '/pub/git'. You can change it during +The default value for `$projectroot` is `/pub/git`. You can change it during building gitweb via `GITWEB_PROJECTROOT` build configuration variable. By default all Git repositories under `$projectroot` are visible and available @@ -231,7 +231,7 @@ Unnamed repository; edit this file to name it for gitweb. ------------------------------------------------------------------------------- + from the template during repository creation, usually installed in -'/usr/share/git-core/templates/'. You can use the `gitweb.description` repo +`/usr/share/git-core/templates/`. You can use the `gitweb.description` repo configuration variable, but the file takes precedence. category (or `gitweb.category`):: @@ -407,7 +407,7 @@ in the instructions so they can be included in a future release. Apache as CGI ~~~~~~~~~~~~~ Apache must be configured to support CGI scripts in the directory in -which gitweb is installed. Let's assume that it is '/var/www/cgi-bin' +which gitweb is installed. Let's assume that it is `/var/www/cgi-bin` directory. ----------------------------------------------------------------------- @@ -431,7 +431,7 @@ You can use mod_perl with gitweb. You must install Apache::Registry (for mod_perl 1.x) or ModPerl::Registry (for mod_perl 2.x) to enable this support. -Assuming that gitweb is installed to '/var/www/perl', the following +Assuming that gitweb is installed to `/var/www/perl`, the following Apache configuration (for mod_perl 2.x) is suitable. ----------------------------------------------------------------------- @@ -456,7 +456,7 @@ Apache with FastCGI ~~~~~~~~~~~~~~~~~~~ Gitweb works with Apache and FastCGI. First you need to rename, copy or symlink gitweb.cgi to gitweb.fcgi. Let's assume that gitweb is -installed in '/usr/share/gitweb' directory. The following Apache +installed in `/usr/share/gitweb` directory. The following Apache configuration is suitable (UNTESTED!) ----------------------------------------------------------------------- @@ -503,22 +503,22 @@ repositories, you can configure Apache like this: ----------------------------------------------------------------------- The above configuration expects your public repositories to live under -'/pub/git' and will serve them as `http://git.domain.org/dir-under-pub-git`, +`/pub/git` and will serve them as `http://git.domain.org/dir-under-pub-git`, both as clonable Git URL and as browseable gitweb interface. If you then start your linkgit:git-daemon[1] with `--base-path=/pub/git --export-all` then you can even use the `git://` URL with exactly the same path. Setting the environment variable `GITWEB_CONFIG` will tell gitweb to use the -named file (i.e. in this example '/etc/gitweb.conf') as a configuration for +named file (i.e. in this example `/etc/gitweb.conf`) as a configuration for gitweb. You don't really need it in above example; it is required only if your configuration file is in different place than built-in (during -compiling gitweb) 'gitweb_config.perl' or '/etc/gitweb.conf'. See +compiling gitweb) 'gitweb_config.perl' or `/etc/gitweb.conf`. See linkgit:gitweb.conf[5] for details, especially information about precedence rules. If you use the rewrite rules from the example you *might* also need something like the following in your gitweb configuration file -('/etc/gitweb.conf' following example): +(`/etc/gitweb.conf` following example): ---------------------------------------------------------------------------- @stylesheets = ("/some/absolute/path/gitweb.css"); $my_uri = "/"; @@ -575,7 +575,7 @@ like this: Here actual project root is passed to gitweb via `GITWEB_PROJECT_ROOT` environment variable from a web server, so you need to put the following -line in gitweb configuration file ('/etc/gitweb.conf' in above example): +line in gitweb configuration file (`/etc/gitweb.conf` in above example): -------------------------------------------------------------------------- $projectroot = $ENV{'GITWEB_PROJECTROOT'} || "/pub/git"; -------------------------------------------------------------------------- @@ -585,7 +585,7 @@ referenced by `$per_request_config`; These configurations enable two things. First, each unix user (`<user>`) of the server will be able to browse through gitweb Git repositories found in -'~/public_git/' with the following url: +`~/public_git/` with the following url: http://git.example.org/~<user>/ @@ -596,7 +596,7 @@ If you already use `mod_userdir` in your virtual host or you don't want to use the \'~' as first character, just comment or remove the second rewrite rule, and uncomment one of the following according to what you want. -Second, repositories found in '/pub/scm/' and '/var/git/' will be accessible +Second, repositories found in `/pub/scm/` and `/var/git/` will be accessible through `http://git.example.org/scm/` and `http://git.example.org/var/`. You can add as many project roots as you want by adding rewrite rules like the third and the fourth. @@ -614,7 +614,7 @@ that it consumes and produces URLs in the form http://git.example.com/project.git/shortlog/sometag i.e. without 'gitweb.cgi' part, by using a configuration such as the -following. This configuration assumes that '/var/www/gitweb' is the +following. This configuration assumes that `/var/www/gitweb` is the DocumentRoot of your webserver, contains the gitweb.cgi script and complementary static files (stylesheet, favicon, JavaScript): @@ -645,9 +645,9 @@ parameter. `@stylesheets`, `$my_uri` and `$home_link`, but you lose "dumb client" access to your project .git dirs (described in "Single URL for gitweb and for fetching" section). A possible workaround for the latter is the -following: in your project root dir (e.g. '/pub/git') have the projects -named *without* a .git extension (e.g. '/pub/git/project' instead of -'/pub/git/project.git') and configure Apache as follows: +following: in your project root dir (e.g. `/pub/git`) have the projects +named *without* a .git extension (e.g. `/pub/git/project` instead of +`/pub/git/project.git`) and configure Apache as follows: ---------------------------------------------------------------------------- <VirtualHost *:80> ServerAlias git.example.com @@ -681,7 +681,7 @@ cloned), while will provide human-friendly gitweb access. This solution is not 100% bulletproof, in the sense that if some project has -a named ref (branch, tag) starting with 'git/', then paths such as +a named ref (branch, tag) starting with `git/`, then paths such as http://git.example.com/project/command/abranch..git/abranch @@ -697,7 +697,7 @@ SEE ALSO -------- linkgit:gitweb.conf[5], linkgit:git-instaweb[1] -'gitweb/README', 'gitweb/INSTALL' +`gitweb/README`, `gitweb/INSTALL` GIT --- diff --git a/Documentation/glossary-content.txt b/Documentation/glossary-content.txt index 023ca95e7c..8d38ae6010 100644 --- a/Documentation/glossary-content.txt +++ b/Documentation/glossary-content.txt @@ -287,6 +287,15 @@ This commit is referred to as a "merge commit", or sometimes just a origin/name-of-upstream-branch, which you can see using `git branch -r`. +[[def_overlay]]overlay:: + Only update and add files to the working directory, but don't + delete them, similar to how 'cp -R' would update the contents + in the destination directory. This is the default mode in a + <<def_checkout,checkout>> when checking out files from the + <<def_index,index>> or a <<def_tree-ish,tree-ish>>. In + contrast, no-overlay mode also deletes tracked files not + present in the source, similar to 'rsync --delete'. + [[def_pack]]pack:: A set of objects which have been compressed into one file (to save space or to transmit them efficiently). diff --git a/Documentation/howto/setup-git-server-over-http.txt b/Documentation/howto/setup-git-server-over-http.txt index f44e5e9458..bfe6f9b500 100644 --- a/Documentation/howto/setup-git-server-over-http.txt +++ b/Documentation/howto/setup-git-server-over-http.txt @@ -244,8 +244,8 @@ Using a proxy: -------------- If you have to access the WebDAV server from behind an HTTP(S) proxy, -set the variable 'all_proxy' to 'http://proxy-host.com:port', or -'http://login-on-proxy:passwd-on-proxy@proxy-host.com:port'. See 'man +set the variable 'all_proxy' to `http://proxy-host.com:port`, or +`http://login-on-proxy:passwd-on-proxy@proxy-host.com:port`. See 'man curl' for details. diff --git a/Documentation/rev-list-options.txt b/Documentation/rev-list-options.txt index ca959a7286..ddbc1de43f 100644 --- a/Documentation/rev-list-options.txt +++ b/Documentation/rev-list-options.txt @@ -743,7 +743,7 @@ explicitly-given commit or tree. --filter-print-omitted:: Only useful with `--filter=`; prints a list of the objects omitted - by the filter. Object IDs are prefixed with a ``~'' character. + by the filter. Object IDs are prefixed with a ``~'' character. --missing=<missing-action>:: A debug option to help with future "partial clone" development. @@ -805,12 +805,13 @@ include::pretty-options.txt[] author's). If `-local` is appended to the format (e.g., `iso-local`), the user's local time zone is used instead. + +-- `--date=relative` shows dates relative to the current time, e.g. ``2 hours ago''. The `-local` option has no effect for `--date=relative`. -+ + `--date=local` is an alias for `--date=default-local`. -+ + `--date=iso` (or `--date=iso8601`) shows timestamps in a ISO 8601-like format. The differences to the strict ISO 8601 format are: @@ -818,15 +819,14 @@ The differences to the strict ISO 8601 format are: - a space between time and time zone - no colon between hours and minutes of the time zone -+ `--date=iso-strict` (or `--date=iso8601-strict`) shows timestamps in strict ISO 8601 format. -+ + `--date=rfc` (or `--date=rfc2822`) shows timestamps in RFC 2822 format, often found in email messages. -+ + `--date=short` shows only the date, but not the time, in `YYYY-MM-DD` format. -+ + `--date=raw` shows the date as seconds since the epoch (1970-01-01 00:00:00 UTC), followed by a space, and then the timezone as an offset from UTC (a `+` or `-` with four digits; the first two are hours, and @@ -835,28 +835,28 @@ with `strftime("%s %z")`). Note that the `-local` option does not affect the seconds-since-epoch value (which is always measured in UTC), but does switch the accompanying timezone value. -+ + `--date=human` shows the timezone if the timezone does not match the current time-zone, and doesn't print the whole date if that matches (ie skip printing year for dates that are "this year", but also skip the whole date itself if it's in the last few days and we can just say what weekday it was). For older dates the hour and minute is also omitted. -+ + `--date=unix` shows the date as a Unix epoch timestamp (seconds since 1970). As with `--raw`, this is always in UTC and therefore `-local` has no effect. -+ + `--date=format:...` feeds the format `...` to your system `strftime`, except for %z and %Z, which are handled internally. Use `--date=format:%c` to show the date in your system locale's preferred format. See the `strftime` manual for a complete list of format placeholders. When using `-local`, the correct syntax is `--date=format-local:...`. -+ + `--date=default` is the default format, and is similar to `--date=rfc2822`, with a few exceptions: - +-- - there is no comma after the day-of-week - the time zone is omitted when the local time zone is used diff --git a/Documentation/revisions.txt b/Documentation/revisions.txt index 72daa20e76..2337a995ec 100644 --- a/Documentation/revisions.txt +++ b/Documentation/revisions.txt @@ -58,7 +58,7 @@ when you run `git merge`. when you run `git cherry-pick`. + Note that any of the 'refs/*' cases above may come either from -the '$GIT_DIR/refs' directory or from the '$GIT_DIR/packed-refs' file. +the `$GIT_DIR/refs` directory or from the `$GIT_DIR/packed-refs` file. While the ref name encoding is unspecified, UTF-8 is preferred as some output processing may assume ref names in UTF-8. @@ -108,7 +108,7 @@ some output processing may assume ref names in UTF-8. `git push` were run while `branchname` was checked out (or the current `HEAD` if no branchname is specified). Since our push destination is in a remote repository, of course, we report the local tracking branch - that corresponds to that branch (i.e., something in 'refs/remotes/'). + that corresponds to that branch (i.e., something in `refs/remotes/`). + Here's an example to make it more clear: + diff --git a/Documentation/sequencer.txt b/Documentation/sequencer.txt index 5747f442f2..5a57c4a407 100644 --- a/Documentation/sequencer.txt +++ b/Documentation/sequencer.txt @@ -1,6 +1,6 @@ --continue:: Continue the operation in progress using the information in - '.git/sequencer'. Can be used to continue after resolving + `.git/sequencer`. Can be used to continue after resolving conflicts in a failed cherry-pick or revert. --quit:: diff --git a/Documentation/technical/api-config.txt b/Documentation/technical/api-config.txt index fa39ac9d71..7d20716c32 100644 --- a/Documentation/technical/api-config.txt +++ b/Documentation/technical/api-config.txt @@ -229,7 +229,7 @@ A `config_set` can be used to construct an in-memory cache for config-like files that the caller specifies (i.e., files like `.gitmodules`, `~/.gitconfig` etc.). For example, ---------------------------------------- +---------------------------------------- struct config_set gm_config; git_configset_init(&gm_config); int b; diff --git a/Documentation/technical/api-parse-options.txt b/Documentation/technical/api-parse-options.txt index 2b036d7838..2e2e7c10c6 100644 --- a/Documentation/technical/api-parse-options.txt +++ b/Documentation/technical/api-parse-options.txt @@ -198,8 +198,10 @@ There are some macros to easily define options: The filename will be prefixed by passing the filename along with the prefix argument of `parse_options()` to `prefix_filename()`. -`OPT_ARGUMENT(long, description)`:: +`OPT_ARGUMENT(long, &int_var, description)`:: Introduce a long-option argument that will be kept in `argv[]`. + If this option was seen, `int_var` will be set to one (except + if a `NULL` pointer was passed). `OPT_NUMBER_CALLBACK(&var, description, func_ptr)`:: Recognize numerical options like -123 and feed the integer as diff --git a/Documentation/technical/directory-rename-detection.txt b/Documentation/technical/directory-rename-detection.txt index 1c0086e287..844629c8c4 100644 --- a/Documentation/technical/directory-rename-detection.txt +++ b/Documentation/technical/directory-rename-detection.txt @@ -20,8 +20,8 @@ More interesting possibilities exist, though, such as: * one side of history renames x -> z, and the other renames some file to x/e, causing the need for the merge to do a transitive rename. - * one side of history renames x -> z, but also renames all files within - x. For example, x/a -> z/alpha, x/b -> z/bravo, etc. + * one side of history renames x -> z, but also renames all files within x. + For example, x/a -> z/alpha, x/b -> z/bravo, etc. * both 'x' and 'y' being merged into a single directory 'z', with a directory rename being detected for both x->z and y->z. diff --git a/Documentation/technical/pack-protocol.txt b/Documentation/technical/pack-protocol.txt index 7a2375a55d..c73e72de0e 100644 --- a/Documentation/technical/pack-protocol.txt +++ b/Documentation/technical/pack-protocol.txt @@ -657,14 +657,14 @@ can be rejected. An example client/server communication might look like this: ---- - S: 007c74730d410fcb6603ace96f1dc55ea6196122532d refs/heads/local\0report-status delete-refs ofs-delta\n + S: 006274730d410fcb6603ace96f1dc55ea6196122532d refs/heads/local\0report-status delete-refs ofs-delta\n S: 003e7d1665144a3a975c05f1f43902ddaf084e784dbe refs/heads/debug\n S: 003f74730d410fcb6603ace96f1dc55ea6196122532d refs/heads/master\n - S: 003f74730d410fcb6603ace96f1dc55ea6196122532d refs/heads/team\n + S: 003d74730d410fcb6603ace96f1dc55ea6196122532d refs/heads/team\n S: 0000 - C: 003e7d1665144a3a975c05f1f43902ddaf084e784dbe 74730d410fcb6603ace96f1dc55ea6196122532d refs/heads/debug\n - C: 003e74730d410fcb6603ace96f1dc55ea6196122532d 5a3f6be755bbb7deae50065988cbfa1ffa9ab68a refs/heads/master\n + C: 00677d1665144a3a975c05f1f43902ddaf084e784dbe 74730d410fcb6603ace96f1dc55ea6196122532d refs/heads/debug\n + C: 006874730d410fcb6603ace96f1dc55ea6196122532d 5a3f6be755bbb7deae50065988cbfa1ffa9ab68a refs/heads/master\n C: 0000 C: [PACKDATA] diff --git a/Documentation/technical/protocol-v2.txt b/Documentation/technical/protocol-v2.txt index ead85ce35c..03264c7d9a 100644 --- a/Documentation/technical/protocol-v2.txt +++ b/Documentation/technical/protocol-v2.txt @@ -1,5 +1,5 @@ - Git Wire Protocol, Version 2 -============================== +Git Wire Protocol, Version 2 +============================ This document presents a specification for a version 2 of Git's wire protocol. Protocol v2 will improve upon v1 in the following ways: @@ -22,8 +22,8 @@ will be commands which a client can request be executed. Once a command has completed, a client can reuse the connection and request that other commands be executed. - Packet-Line Framing ---------------------- +Packet-Line Framing +------------------- All communication is done using packet-line framing, just as in v1. See `Documentation/technical/pack-protocol.txt` and @@ -34,8 +34,8 @@ In protocol v2 these special packets will have the following semantics: * '0000' Flush Packet (flush-pkt) - indicates the end of a message * '0001' Delimiter Packet (delim-pkt) - separates sections of a message - Initial Client Request ------------------------- +Initial Client Request +---------------------- In general a client can request to speak protocol v2 by sending `version=2` through the respective side-channel for the transport being @@ -43,22 +43,22 @@ used which inevitably sets `GIT_PROTOCOL`. More information can be found in `pack-protocol.txt` and `http-protocol.txt`. In all cases the response from the server is the capability advertisement. - Git Transport -~~~~~~~~~~~~~~~ +Git Transport +~~~~~~~~~~~~~ When using the git:// transport, you can request to use protocol v2 by sending "version=2" as an extra parameter: 003egit-upload-pack /project.git\0host=myserver.com\0\0version=2\0 - SSH and File Transport -~~~~~~~~~~~~~~~~~~~~~~~~ +SSH and File Transport +~~~~~~~~~~~~~~~~~~~~~~ When using either the ssh:// or file:// transport, the GIT_PROTOCOL environment variable must be set explicitly to include "version=2". - HTTP Transport -~~~~~~~~~~~~~~~~ +HTTP Transport +~~~~~~~~~~~~~~ When using the http:// or https:// transport a client makes a "smart" info/refs request as described in `http-protocol.txt` and requests that @@ -79,8 +79,8 @@ A v2 server would reply: Subsequent requests are then made directly to the service `$GIT_URL/git-upload-pack`. (This works the same for git-receive-pack). - Capability Advertisement --------------------------- +Capability Advertisement +------------------------ A server which decides to communicate (based on a request from a client) using protocol version 2, notifies the client by sending a version string @@ -101,8 +101,8 @@ to be executed by the client. key = 1*(ALPHA | DIGIT | "-_") value = 1*(ALPHA | DIGIT | " -_.,?\/{}[]()<>!@#$%^&*+=:;") - Command Request ------------------ +Command Request +--------------- After receiving the capability advertisement, a client can then issue a request to select the command it wants with any particular capabilities @@ -137,8 +137,8 @@ command be executed or can terminate the connection. A client may optionally send an empty request consisting of just a flush-pkt to indicate that no more requests will be made. - Capabilities --------------- +Capabilities +------------ There are two different types of capabilities: normal capabilities, which can be used to to convey information or alter the behavior of a @@ -153,8 +153,8 @@ management on the server side in order to function correctly. This permits simple round-robin load-balancing on the server side, without needing to worry about state management. - agent -~~~~~~~ +agent +~~~~~ The server can advertise the `agent` capability with a value `X` (in the form `agent=X`) to notify the client that the server is running version @@ -168,8 +168,8 @@ printable ASCII characters except space (i.e., the byte range 32 < x < and debugging purposes, and MUST NOT be used to programmatically assume the presence or absence of particular features. - ls-refs -~~~~~~~~~ +ls-refs +~~~~~~~ `ls-refs` is the command used to request a reference advertisement in v2. Unlike the current reference advertisement, ls-refs takes in arguments @@ -199,8 +199,8 @@ The output of ls-refs is as follows: symref = "symref-target:" symref-target peeled = "peeled:" obj-id - fetch -~~~~~~~ +fetch +~~~~~ `fetch` is the command used to fetch a packfile in v2. It can be looked at as a modified version of the v1 fetch where the ref-advertisement is @@ -444,8 +444,8 @@ header. 2 - progress messages 3 - fatal error message just before stream aborts - server-option -~~~~~~~~~~~~~~~ +server-option +~~~~~~~~~~~~~ If advertised, indicates that any number of server specific options can be included in a request. This is done by sending each option as a diff --git a/Documentation/urls.txt b/Documentation/urls.txt index b05da95788..bc354fe2dc 100644 --- a/Documentation/urls.txt +++ b/Documentation/urls.txt @@ -62,7 +62,7 @@ may be used: where <address> may be a path, a server and path, or an arbitrary URL-like string recognized by the specific remote helper being -invoked. See linkgit:gitremote-helpers[1] for details. +invoked. See linkgit:gitremote-helpers[7] for details. If there are a large number of similarly-named remote repositories and you want to use a different format for them (such that the URLs you |