diff options
Diffstat (limited to 'Documentation')
83 files changed, 1074 insertions, 343 deletions
diff --git a/Documentation/Makefile b/Documentation/Makefile index d40e211f22..063fa696c9 100644 --- a/Documentation/Makefile +++ b/Documentation/Makefile @@ -66,12 +66,6 @@ endif -include ../config.mak # -# For asciidoc ... -# -7.1.2, set ASCIIDOC7 -# 8.0-, no extra settings are needed -# - -# # For docbook-xsl ... # -1.68.1, no extra settings are needed? # 1.69.0, set ASCIIDOC_ROFF? @@ -81,9 +75,6 @@ endif # 1.73.0-, no extra settings are needed # -ifndef ASCIIDOC7 -ASCIIDOC_EXTRA += -a asciidoc7compatible -a no-inline-literal -endif ifdef DOCBOOK_XSL_172 ASCIIDOC_EXTRA += -a git-asciidoc-no-roff MANPAGE_XSL = manpage-1.72.xsl @@ -124,14 +115,15 @@ SHELL_PATH ?= $(SHELL) # Shell quote; SHELL_PATH_SQ = $(subst ','\'',$(SHELL_PATH)) -# -# Please note that there is a minor bug in asciidoc. -# The version after 6.0.3 _will_ include the patch found here: -# http://marc.theaimsgroup.com/?l=git&m=111558757202243&w=2 -# -# Until that version is released you may have to apply the patch -# yourself - yes, all 6 characters of it! -# +ifdef DEFAULT_PAGER +DEFAULT_PAGER_SQ = $(subst ','\'',$(DEFAULT_PAGER)) +ASCIIDOC_EXTRA += -a 'git-default-pager=$(DEFAULT_PAGER_SQ)' +endif + +ifdef DEFAULT_EDITOR +DEFAULT_EDITOR_SQ = $(subst ','\'',$(DEFAULT_EDITOR)) +ASCIIDOC_EXTRA += -a 'git-default-editor=$(DEFAULT_EDITOR_SQ)' +endif QUIET_SUBDIR0 = +$(MAKE) -C # space to separate -C and subdir QUIET_SUBDIR1 = @@ -270,6 +262,7 @@ technical/api-index.txt: technical/api-index-skel.txt \ technical/api-index.sh $(patsubst %,%.txt,$(API_DOCS)) $(QUIET_GEN)cd technical && '$(SHELL_PATH_SQ)' ./api-index.sh +technical/%.html: ASCIIDOC_EXTRA += -a git-relative-html-prefix=../ $(patsubst %,%.html,$(API_DOCS) technical/api-index): %.html : %.txt $(QUIET_ASCIIDOC)$(ASCIIDOC) -b xhtml11 -f asciidoc.conf \ $(ASCIIDOC_EXTRA) -agit_version=$(GIT_VERSION) $*.txt @@ -323,6 +316,7 @@ $(patsubst %,%.html,$(ARTICLES)) : %.html : %.txt WEBDOC_DEST = /pub/software/scm/git/docs +howto/%.html: ASCIIDOC_EXTRA += -a git-relative-html-prefix=../ $(patsubst %.txt,%.html,$(wildcard howto/*.txt)): %.html : %.txt $(QUIET_ASCIIDOC)$(RM) $@+ $@ && \ sed -e '1,/^$$/d' $< | $(ASCIIDOC) $(ASCIIDOC_EXTRA) -b xhtml11 - >$@+ && \ diff --git a/Documentation/RelNotes/1.7.10.2.txt b/Documentation/RelNotes/1.7.10.2.txt new file mode 100644 index 0000000000..7a7e9d6fd1 --- /dev/null +++ b/Documentation/RelNotes/1.7.10.2.txt @@ -0,0 +1,85 @@ +Git v1.7.10.2 Release Notes +=========================== + +Fixes since v1.7.10.1 +--------------------- + + * The test scaffolding for git-daemon was flaky. + + * The test scaffolding for fast-import was flaky. + + * The filesystem boundary was not correctly reported when .git directory + discovery stopped at a mount point. + + * HTTP transport that requires authentication did not work correctly when + multiple connections are used simultaneously. + + * Minor memory leak during unpack_trees (hence "merge" and "checkout" + to check out another branch) has been plugged. + + * In the older days, the header "Conflicts:" in "cherry-pick" and "merge" + was separated by a blank line from the list of paths that follow for + readability, but when "merge" was rewritten in C, we lost it by + mistake. Remove the newline from "cherry-pick" to make them match + again. + + * The command line parser choked "git cherry-pick $name" when $name can + be both revision name and a pathname, even though $name can never be a + path in the context of the command. + + * The "include.path" facility in the configuration mechanism added in + 1.7.10 forgot to interpret "~/path" and "~user/path" as it should. + + * "git config --rename-section" to rename an existing section into a + bogus one did not check the new name. + + * The "diff --no-index" codepath used limited-length buffers, risking + pathnames getting truncated. Update it to use the strbuf API. + + * The report from "git fetch" said "new branch" even for a non branch + ref. + + * The http-backend (the server side of the smart http transfer) used + to overwrite GIT_COMMITTER_NAME and GIT_COMMITTER_EMAIL with the + value obtained from REMOTE_USER unconditionally, making it + impossible for the server side site-specific customization to use + different identity sources to affect the names logged. It now uses + REMOTE_USER only as a fallback value. + + * "log --graph" was not very friendly with "--stat" option and its + output had line breaks at wrong places. + + * Octopus merge strategy did not reduce heads that are recorded in the + final commit correctly. + + * "git push" over smart-http lost progress output a few releases ago; + this release resurrects it. + + * The error and advice messages given by "git push" when it fails due + to non-ff were not very helpful to new users; it has been broken + into three cases, and each is given a separate advice message. + + * The insn sheet given by "rebase -i" did not make it clear that the + insn lines can be re-ordered to affect the order of the commits in + the resulting history. + + * "git repack" used to write out unreachable objects as loose objects + when repacking, even if such loose objects will immediately pruned + due to its age. + + * A contrib script "rerere-train" did not work out of the box unless + user futzed with her $PATH. + + * "git rev-parse --show-prefix" used to emit nothing when run at the + top-level of the working tree, but now it gives a blank line. + + * The i18n of error message "git stash save" was not properly done. + + * "git submodule" used a sed script that some platforms mishandled. + + * When using a Perl script on a system where "perl" found on user's + $PATH could be ancient or otherwise broken, we allow builders to + specify the path to a good copy of Perl with $PERL_PATH. The + gitweb test forgot to use that Perl when running its test. + +Also contains minor fixes and documentation updates. diff --git a/Documentation/RelNotes/1.7.10.3.txt b/Documentation/RelNotes/1.7.10.3.txt new file mode 100644 index 0000000000..703fbf1d60 --- /dev/null +++ b/Documentation/RelNotes/1.7.10.3.txt @@ -0,0 +1,43 @@ +Git v1.7.10.3 Release Notes +=========================== + +Fixes since v1.7.10.2 +--------------------- + + * The message file for German translation has been updated a bit. + + * Running "git checkout" on an unborn branch used to corrupt HEAD. + + * When checking out another commit from an already detached state, we + used to report all commits that are not reachable from any of the + refs as lossage, but some of them might be reachable from the new + HEAD, and there is no need to warn about them. + + * Some time ago, "git clone" lost the progress output for its + "checkout" phase; when run without any "--quiet" option, it should + give progress to the lengthy operation. + + * The directory path used in "git diff --no-index", when it recurses + down, was broken with a recent update after v1.7.10.1 release. + + * "log -z --pretty=tformat:..." did not terminate each record with + NUL. The fix is not entirely correct when the output also asks for + --patch and/or --stat, though. + + * The DWIM behaviour for "log --pretty=format:%gd -g" was somewhat + broken and gave undue precedence to configured log.date, causing + "git stash list" to show "stash@{time stamp string}". + + * "git status --porcelain" ignored "--branch" option by mistake. The + output for "git status --branch -z" was also incorrect and did not + terminate the record for the current branch name with NUL as asked. + + * When a submodule repository uses alternate object store mechanism, + some commands that were started from the superproject did not + notice it and failed with "No such object" errors. The subcommands + of "git submodule" command that recursed into the submodule in a + separate process were OK; only the ones that cheated and peeked + directly into the submodule's repository from the primary process + were affected. + +Also contains minor fixes and documentation updates. diff --git a/Documentation/RelNotes/1.7.10.4.txt b/Documentation/RelNotes/1.7.10.4.txt new file mode 100644 index 0000000000..326670df6e --- /dev/null +++ b/Documentation/RelNotes/1.7.10.4.txt @@ -0,0 +1,29 @@ +Git v1.7.10.4 Release Notes +=========================== + +Fixes since v1.7.10.3 +--------------------- + + * The message file for Swedish translation has been updated a bit. + + * A name taken from mailmap was copied into an internal buffer + incorrectly and could overun the buffer if it is too long. + + * A malformed commit object that has a header line chomped in the + middle could kill git with a NULL pointer dereference. + + * An author/committer name that is a single character was mishandled + as an invalid name by mistake. + + * The progress indicator for a large "git checkout" was sent to + stderr even if it is not a terminal. + + * "git grep -e '$pattern'", unlike the case where the patterns are + read from a file, did not treat individual lines in the given + pattern argument as separate regular expressions as it should. + + * When "git rebase" was given a bad commit to replay the history on, + its error message did not correctly give the command line argument + it had trouble parsing. + +Also contains minor fixes and documentation updates. diff --git a/Documentation/RelNotes/1.7.10.5.txt b/Documentation/RelNotes/1.7.10.5.txt new file mode 100644 index 0000000000..4db1770e38 --- /dev/null +++ b/Documentation/RelNotes/1.7.10.5.txt @@ -0,0 +1,12 @@ +Git v1.7.10.5 Release Notes +=========================== + +Fixes since v1.7.10.4 +--------------------- + + * "git fast-export" did not give a readable error message when the + same mark erroneously appeared twice in the --import-marks input. + + * "git rebase -p" used to pay attention to rebase.autosquash which + was wrong. "git rebase -p -i" should, but "git rebase -p" by + itself should not. diff --git a/Documentation/RelNotes/1.7.11.1.txt b/Documentation/RelNotes/1.7.11.1.txt new file mode 100644 index 0000000000..577eccaacd --- /dev/null +++ b/Documentation/RelNotes/1.7.11.1.txt @@ -0,0 +1,9 @@ +Git v1.7.11.1 Release Notes +=========================== + +Fixes since v1.7.11 +------------------- + + * The cross links in the HTML version of manual pages were broken. + +Also contains minor typofixes and documentation updates. diff --git a/Documentation/RelNotes/1.7.11.txt b/Documentation/RelNotes/1.7.11.txt new file mode 100644 index 0000000000..15b954ca4b --- /dev/null +++ b/Documentation/RelNotes/1.7.11.txt @@ -0,0 +1,139 @@ +Git v1.7.11 Release Notes +========================= + +Updates since v1.7.10 +--------------------- + +UI, Workflows & Features + + * A new mode for push, "simple", which is a cross between "current" + and "upstream", has been introduced. "git push" without any refspec + will push the current branch out to the same name at the remote + repository only when it is set to track the branch with the same + name over there. The plan is to make this mode the new default + value when push.default is not configured. + + * A couple of commands learned the "--column" option to produce + columnar output. + + * A third-party tool "git subtree" is distributed in contrib/ + + * A remote helper that acts as a proxy and caches ssl session for the + https:// transport is added to the contrib/ area. + + * Error messages given when @{u} is used for a branch without its + upstream configured have been clarified. + + * Even with the "-q"uiet option, "checkout" used to report setting up + tracking. Also "branch" learned the "-q"uiet option to squelch + informational message. + + * Your build platform may support hardlinks but you may prefer not to + use them, e.g. when installing to DESTDIR to make a tarball and + untarring on a filesystem that has poor support for hardlinks. + There is a Makefile option NO_INSTALL_HARDLINKS for you. + + * The smart-http backend used to always override GIT_COMMITTER_* + variables with REMOTE_USER and REMOTE_ADDR, but these variables are + now preserved when set. + + * "git am" learned the "--include" option, which is an opposite of + existing the "--exclude" option. + + * When "git am -3" needs to fall back to an application of the patch + to a synthesized preimage followed by a 3-way merge, the paths that + needed such treatment are now reported to the end user, so that the + result in them can be eyeballed with extra care. + + * The output from "diff/log --stat" used to always allocate 4 columns + to show the number of modified lines, but not anymore. + + * "git difftool" learned the "--dir-diff" option to spawn external + diff tools that can compare two directory hierarchies at a time + after populating two temporary directories, instead of running an + instance of the external tool once per a file pair. + + * The "fmt-merge-msg" command learned to list the primary contributors + involved in the side topic you are merging in a comment in the merge + commit template. + + * "git rebase" learned to optionally keep commits that do not + introduce any change in the original history. + + * "git push --recurse-submodules" learned to optionally look into the + histories of submodules bound to the superproject and push them + out. + + * A 'snapshot' request to "gitweb" honors If-Modified-Since: header, + based on the commit date. + + * "gitweb" learned to highlight the patch it outputs even more. + +Foreign Interface + + * "git svn" used to die with unwanted SIGPIPE when talking with an HTTP + server that uses keep-alive. + + * "git svn" learned to use platform specific authentication + providers, e.g. gnome-keyring, kwallet, etc. + + * "git p4" has been moved out of the contrib/ area and has seen more + work on importing labels as tags from (and exporting tags as labels + to) p4. + +Performance and Internal Implementation (please report possible regressions) + + * Bash completion script (in contrib/) have been cleaned up to make + future work on it simpler. + + * An experimental "version 4" format of the index file has been + introduced to reduce on-disk footprint and I/O overhead. + + * "git archive" learned to produce its output without reading the + blob object it writes out in memory in its entirety. + + * "git index-pack" that runs when fetching or pushing objects to + complete the packfile on the receiving end learned to use multiple + threads to do its job when available. + + * The code to compute hash values for lines used by the internal diff + engine was optimized on little-endian machines, using the same + trick the kernel folks came up with. + + * "git apply" had some memory leaks plugged. + + * Setting up a revision traversal with many starting points was + inefficient as these were placed in a date-order priority queue + one-by-one. Now they are collected in the queue unordered first, + and sorted immediately before getting used. + + * More lower-level commands learned to use the streaming API to read + from the object store without keeping everything in core. + + * The weighting parameters to suggestion command name typo have been + tweaked, so that "git tags" will suggest "tag?" and not "stage?". + + * Because "sh" on the user's PATH may be utterly broken on some + systems, run-command API now uses SHELL_PATH, not /bin/sh, when + spawning an external command (not applicable to Windows port). + + * The API to iterate over the refs/ hierarchy has been tweaked to + allow walking only a subset of it more efficiently. + +Also contains minor documentation updates and code clean-ups. + + +Fixes since v1.7.10 +------------------- + +Unless otherwise noted, all the fixes since v1.7.10 in the maintenance +releases are contained in this release (see release notes to them for +details). + + * "git submodule init" used to report "registered for path ..." + even for submodules that were registered earlier. + (cherry-pick c1c259e jl/submodule-report-new-path-once later to maint). + + * "git diff --stat" used to fully count a binary file with modified + execution bits whose contents is unmodified, which was not quite + right. diff --git a/Documentation/RelNotes/1.7.12.txt b/Documentation/RelNotes/1.7.12.txt new file mode 100644 index 0000000000..117f4b1904 --- /dev/null +++ b/Documentation/RelNotes/1.7.12.txt @@ -0,0 +1,55 @@ +Git v1.7.12 Release Notes +========================= + +Updates since v1.7.11 +--------------------- + +UI, Workflows & Features + + * "git help" used to always default to "man" format even on platforms + where "man" viewer is not widely available. + + * "git clone --local $path" started its life as an experiment to + optionally use link/copy when cloning a repository on the disk, but + we didn't deprecate it after we made the option a no-op to always + use the optimization. The command learned "--no-local" option to + turn this off, as a more explicit alternative over use of file:// + URL. + + * git native protocol agents learned to show software version over + the wire, so that the server log can be examined to see the vintage + distribution of clients. + + +Foreign Interface + + +Performance and Internal Implementation (please report possible regressions) + + * Some tests showed false failures caused by a bug in ecryptofs. + + +Also contains minor documentation updates and code clean-ups. + + +Fixes since v1.7.11 +------------------- + +Unless otherwise noted, all the fixes since v1.7.11 in the maintenance +releases are contained in this release (see release notes to them for +details). + +* Running "git bundle verify" on a bundle that records a complete + history said "it requires these 0 commits". + (merge 8c3710f jc/bundle-complete-notice later to maint). + +* "git ls-files --exclude=t -i" did not consider anything under t/ as + excluded, as it did not pay attention to exclusion of leading paths + while walking the index. Other two users of excluded() are also + updated. + (merge 0d316f0 jc/ls-files-i-dir later to maint). + +* "git request-pull $url dev" when the tip of "dev" branch was tagged + with "ext4-for-linus" used the contents from the tag in the output + but still asked the "dev" branch to be pulled, not the tag. + (merge 682853e jc/request-pull-match-tagname later to maint). diff --git a/Documentation/asciidoc.conf b/Documentation/asciidoc.conf index aea8627be0..a26d245ab4 100644 --- a/Documentation/asciidoc.conf +++ b/Documentation/asciidoc.conf @@ -90,6 +90,8 @@ endif::backend-docbook[] endif::doctype-manpage[] ifdef::backend-xhtml11[] +[attributes] +git-relative-html-prefix= [linkgit-inlinemacro] -<a href="{target}.html">{target}{0?({0})}</a> +<a href="{git-relative-html-prefix}{target}.html">{target}{0?({0})}</a> endif::backend-xhtml11[] diff --git a/Documentation/config.txt b/Documentation/config.txt index c081657be7..915cb5a547 100644 --- a/Documentation/config.txt +++ b/Documentation/config.txt @@ -95,7 +95,9 @@ included file is expanded immediately, as if its contents had been found at the location of the include directive. If the value of the `include.path` variable is a relative path, the path is considered to be relative to the configuration file in which the include directive was -found. See below for examples. +found. The value of `include.path` is subject to tilde expansion: `~/` +is expanded to the value of `$HOME`, and `~user/` to the specified +user's home directory. See below for examples. Example ~~~~~~~ @@ -122,6 +124,7 @@ Example [include] path = /path/to/foo.inc ; include by absolute path path = foo ; expand "foo" relative to the current file + path = ~/foo ; expand "foo" in your $HOME directory Variables ~~~~~~~~~ @@ -138,8 +141,23 @@ advice.*:: + -- pushNonFastForward:: - Advice shown when linkgit:git-push[1] refuses - non-fast-forward refs. + Set this variable to 'false' if you want to disable + 'pushNonFFCurrent', 'pushNonFFDefault', and + 'pushNonFFMatching' simultaneously. + pushNonFFCurrent:: + Advice shown when linkgit:git-push[1] fails due to a + non-fast-forward update to the current branch. + pushNonFFDefault:: + Advice to set 'push.default' to 'upstream' or 'current' + when you ran linkgit:git-push[1] and pushed 'matching + refs' by default (i.e. you did not provide an explicit + refspec, and no 'push.default' configuration was set) + and it resulted in a non-fast-forward error. + pushNonFFMatching:: + Advice shown when you ran linkgit:git-push[1] and pushed + 'matching refs' explicitly (i.e. you used ':', or + specified a refspec that isn't your current branch) and + it resulted in a non-fast-forward error. statusHints:: Directions on how to stage/unstage/add shown in the output of linkgit:git-status[1] and the template shown @@ -463,8 +481,8 @@ Common unit suffixes of 'k', 'm', or 'g' are supported. core.excludesfile:: In addition to '.gitignore' (per-directory) and '.git/info/exclude', git looks into this file for patterns - of files which are not meant to be tracked. "{tilde}/" is expanded - to the value of `$HOME` and "{tilde}user/" to the specified user's + of files which are not meant to be tracked. "`~/`" is expanded + to the value of `$HOME` and "`~user/`" to the specified user's home directory. See linkgit:gitignore[5]. core.askpass:: @@ -838,6 +856,44 @@ color.ui:: `never` if you prefer git commands not to use color unless enabled explicitly with some other configuration or the `--color` option. +column.ui:: + Specify whether supported commands should output in columns. + This variable consists of a list of tokens separated by spaces + or commas: ++ +-- +`always`;; + always show in columns +`never`;; + never show in columns +`auto`;; + show in columns if the output is to the terminal +`column`;; + fill columns before rows (default) +`row`;; + fill rows before columns +`plain`;; + show in one column +`dense`;; + make unequal size columns to utilize more space +`nodense`;; + make equal size columns +-- ++ + This option defaults to 'never'. + +column.branch:: + Specify whether to output branch listing in `git branch` in columns. + See `column.ui` for details. + +column.status:: + Specify whether to output untracked files in `git status` in columns. + See `column.ui` for details. + +column.tag:: + Specify whether to output tag listing in `git tag` in columns. + See `column.ui` for details. + commit.status:: A boolean to enable/disable inclusion of status information in the commit message template when using an editor to prepare the commit @@ -845,7 +901,7 @@ commit.status:: commit.template:: Specify a file to use as the template for new commit messages. - "{tilde}/" is expanded to the value of `$HOME` and "{tilde}user/" to the + "`~/`" is expanded to the value of `$HOME` and "`~user/`" to the specified user's home directory. credential.helper:: @@ -970,7 +1026,7 @@ format.thread:: a boolean value, or `shallow` or `deep`. `shallow` threading makes every mail a reply to the head of the series, where the head is chosen from the cover letter, the - `\--in-reply-to`, and the first patch mail, in this order. + `--in-reply-to`, and the first patch mail, in this order. `deep` threading makes every mail a reply to the previous one. A true boolean value is the same as `shallow`, and a false value disables threading. @@ -1401,7 +1457,7 @@ instaweb.port:: interactive.singlekey:: In interactive commands, allow the user to provide one-letter input with a single key (i.e., without hitting enter). - Currently this is used by the `\--patch` mode of + Currently this is used by the `--patch` mode of linkgit:git-add[1], linkgit:git-checkout[1], linkgit:git-commit[1], linkgit:git-reset[1], and linkgit:git-stash[1]. Note that this setting is silently ignored if portable keystroke input @@ -1409,13 +1465,13 @@ interactive.singlekey:: log.abbrevCommit:: If true, makes linkgit:git-log[1], linkgit:git-show[1], and - linkgit:git-whatchanged[1] assume `\--abbrev-commit`. You may - override this option with `\--no-abbrev-commit`. + linkgit:git-whatchanged[1] assume `--abbrev-commit`. You may + override this option with `--no-abbrev-commit`. log.date:: Set the default date-time mode for the 'log' command. Setting a value for log.date is similar to using 'git log''s - `\--date` option. Possible values are `relative`, `local`, + `--date` option. Possible values are `relative`, `local`, `default`, `iso`, `rfc`, and `short`; see linkgit:git-log[1] for details. @@ -1605,18 +1661,18 @@ pack.indexVersion:: and this config option ignored whenever the corresponding pack is larger than 2 GB. + -If you have an old git that does not understand the version 2 `{asterisk}.idx` file, +If you have an old git that does not understand the version 2 `*.idx` file, cloning or fetching over a non native protocol (e.g. "http" and "rsync") -that will copy both `{asterisk}.pack` file and corresponding `{asterisk}.idx` file from the +that will copy both `*.pack` file and corresponding `*.idx` file from the other side may give you a repository that cannot be accessed with your -older version of git. If the `{asterisk}.pack` file is smaller than 2 GB, however, +older version of git. If the `*.pack` file is smaller than 2 GB, however, you can use linkgit:git-index-pack[1] on the *.pack file to regenerate -the `{asterisk}.idx` file. +the `*.idx` file. pack.packSizeLimit:: The maximum size of a pack. This setting only affects packing to a file when repacking, i.e. the git:// protocol - is unaffected. It can be overridden by the `\--max-pack-size` + is unaffected. It can be overridden by the `--max-pack-size` option of linkgit:git-repack[1]. The minimum size allowed is limited to 1 MiB. The default is unlimited. Common unit suffixes of 'k', 'm', or 'g' are @@ -1626,8 +1682,8 @@ pager.<cmd>:: If the value is boolean, turns on or off pagination of the output of a particular git subcommand when writing to a tty. Otherwise, turns on pagination for the subcommand using the - pager specified by the value of `pager.<cmd>`. If `\--paginate` - or `\--no-pager` is specified on the command line, it takes + pager specified by the value of `pager.<cmd>`. If `--paginate` + or `--no-pager` is specified on the command line, it takes precedence over this option. To disable pagination for all commands, set `core.pager` or `GIT_PAGER` to `cat`. @@ -1635,9 +1691,9 @@ pretty.<name>:: Alias for a --pretty= format string, as specified in linkgit:git-log[1]. Any aliases defined here can be used just as the built-in pretty formats could. For example, - running `git config pretty.changelog "format:{asterisk} %H %s"` + running `git config pretty.changelog "format:* %H %s"` would cause the invocation `git log --pretty=changelog` - to be equivalent to running `git log "--pretty=format:{asterisk} %H %s"`. + to be equivalent to running `git log "--pretty=format:* %H %s"`. Note that an alias with the same name as a built-in format will be silently ignored. @@ -1665,12 +1721,30 @@ push.default:: line. Possible values are: + * `nothing` - do not push anything. -* `matching` - push all matching branches. - All branches having the same name in both ends are considered to be - matching. This is the default. +* `matching` - push all branches having the same name in both ends. + This is for those who prepare all the branches into a publishable + shape and then push them out with a single command. It is not + appropriate for pushing into a repository shared by multiple users, + since locally stalled branches will attempt a non-fast forward push + if other users updated the branch. + + + This is currently the default, but Git 2.0 will change the default + to `simple`. * `upstream` - push the current branch to its upstream branch. -* `tracking` - deprecated synonym for `upstream`. + With this, `git push` will update the same remote ref as the one which + is merged by `git pull`, making `push` and `pull` symmetrical. + See "branch.<name>.merge" for how to configure the upstream branch. +* `simple` - like `upstream`, but refuses to push if the upstream + branch's name is different from the local one. This is the safest + option and is well-suited for beginners. It will become the default + in Git 2.0. * `current` - push the current branch to a branch of the same name. + + + The `simple`, `current` and `upstream` modes are for those who want to + push out a single branch after finishing work, even when the other + branches are not yet ready to be pushed out. If you are working with + other people to push into the same shared repository, you would want + to use one of these. rebase.stat:: Whether to show a diffstat of what changed upstream since the last @@ -1750,7 +1824,7 @@ remote.<name>.push:: remote.<name>.mirror:: If true, pushing to this remote will automatically behave - as if the `\--mirror` option was given on the command line. + as if the `--mirror` option was given on the command line. remote.<name>.skipDefaultUpdate:: If true, this remote will be skipped by default when updating diff --git a/Documentation/diff-config.txt b/Documentation/diff-config.txt index 6aa1be0478..67a90a828c 100644 --- a/Documentation/diff-config.txt +++ b/Documentation/diff-config.txt @@ -54,7 +54,7 @@ and accumulating child directory counts in the parent directories: diff.statGraphWidth:: Limit the width of the graph part in --stat output. If set, applies - to all commands generating --stat outuput except format-patch. + to all commands generating --stat output except format-patch. diff.external:: If this config variable is set, diff generation is not diff --git a/Documentation/diff-generate-patch.txt b/Documentation/diff-generate-patch.txt index c57460c03d..55f499a160 100644 --- a/Documentation/diff-generate-patch.txt +++ b/Documentation/diff-generate-patch.txt @@ -175,7 +175,7 @@ In the above example output, the function signature was changed from both files (hence two `-` removals from both file1 and file2, plus `++` to mean one line that was added does not appear in either file1 nor file2). Also eight other lines are the same -from file1 but do not appear in file2 (hence prefixed with `{plus}`). +from file1 but do not appear in file2 (hence prefixed with `+`). When shown by `git diff-tree -c`, it compares the parents of a merge commit with the merge result (i.e. file1..fileN are the diff --git a/Documentation/diff-options.txt b/Documentation/diff-options.txt index 378f19f0e2..cf4b216598 100644 --- a/Documentation/diff-options.txt +++ b/Documentation/diff-options.txt @@ -59,7 +59,7 @@ endif::git-format-patch[] Generate a diffstat. By default, as much space as necessary will be used for the filename part, and the rest for the graph part. Maximum width defaults to terminal width, or 80 columns - if not connected to a terminal, and can be overriden by + if not connected to a terminal, and can be overridden by `<width>`. The width of the filename part can be limited by giving another width `<name-width>` after a comma. The width of the graph part can be limited by using @@ -74,7 +74,7 @@ These parameters can also be set individually with `--stat-width=<width>`, `--stat-name-width=<name-width>` and `--stat-count=<count>`. --numstat:: - Similar to `\--stat`, but shows number of added and + Similar to `--stat`, but shows number of added and deleted lines in decimal notation and pathname without abbreviation, to make it more machine friendly. For binary files, outputs two `-` instead of saying diff --git a/Documentation/everyday.txt b/Documentation/everyday.txt index ae413e52a5..048337b40f 100644 --- a/Documentation/everyday.txt +++ b/Documentation/everyday.txt @@ -98,8 +98,8 @@ you originally wrote. <9> switch to the master branch. <10> merge a topic branch into your master branch. <11> review commit logs; other forms to limit output can be -combined and include `\--max-count=10` (show 10 commits), -`\--until=2005-12-10`, etc. +combined and include `--max-count=10` (show 10 commits), +`--until=2005-12-10`, etc. <12> view only the changes that touch what's in `curses/` directory, since `v2.43` tag. diff --git a/Documentation/git-am.txt b/Documentation/git-am.txt index ee6cca2e13..19d57a80f5 100644 --- a/Documentation/git-am.txt +++ b/Documentation/git-am.txt @@ -13,7 +13,7 @@ SYNOPSIS [--3way] [--interactive] [--committer-date-is-author-date] [--ignore-date] [--ignore-space-change | --ignore-whitespace] [--whitespace=<option>] [-C<n>] [-p<n>] [--directory=<dir>] - [--exclude=<path>] [--reject] [-q | --quiet] + [--exclude=<path>] [--include=<path>] [--reject] [-q | --quiet] [--scissors | --no-scissors] [(<mbox> | <Maildir>)...] 'git am' (--continue | --skip | --abort) @@ -92,6 +92,7 @@ default. You can use `--no-utf8` to override this. -p<n>:: --directory=<dir>:: --exclude=<path>:: +--include=<path>:: --reject:: These flags are passed to the 'git apply' (see linkgit:git-apply[1]) program that applies diff --git a/Documentation/git-archive.txt b/Documentation/git-archive.txt index ac7006e640..59d73e532f 100644 --- a/Documentation/git-archive.txt +++ b/Documentation/git-archive.txt @@ -160,7 +160,7 @@ EXAMPLES Same as above, but the format is inferred from the output file. -`git archive --format=tar --prefix=git-1.4.0/ v1.4.0{caret}\{tree\} | gzip >git-1.4.0.tar.gz`:: +`git archive --format=tar --prefix=git-1.4.0/ v1.4.0^{tree} | gzip >git-1.4.0.tar.gz`:: Create a compressed tarball for v1.4.0 release, but without a global extended pax header. diff --git a/Documentation/git-blame.txt b/Documentation/git-blame.txt index 9516914236..7ee923629e 100644 --- a/Documentation/git-blame.txt +++ b/Documentation/git-blame.txt @@ -160,7 +160,7 @@ introduced the file with: git log --diff-filter=A --pretty=short -- foo and then annotate the change between the commit and its -parents, using `commit{caret}!` notation: +parents, using `commit^!` notation: git blame -C -C -f $commit^! -- foo diff --git a/Documentation/git-branch.txt b/Documentation/git-branch.txt index 6410c3d345..47235bea04 100644 --- a/Documentation/git-branch.txt +++ b/Documentation/git-branch.txt @@ -10,6 +10,7 @@ SYNOPSIS [verse] 'git branch' [--color[=<when>] | --no-color] [-r | -a] [--list] [-v [--abbrev=<length> | --no-abbrev]] + [--column[=<options>] | --no-column] [(--merged | --no-merged | --contains) [<commit>]] [<pattern>...] 'git branch' [--set-upstream | --track | --no-track] [-l] [-f] <branchname> [<start-point>] 'git branch' (-m | -M) [<oldbranch>] <newbranch> @@ -107,6 +108,14 @@ OPTIONS default to color output. Same as `--color=never`. +--column[=<options>]:: +--no-column:: + Display branch listing in columns. See configuration variable + column.branch for option syntax.`--column` and `--no-column` + without options are equivalent to 'always' and 'never' respectively. ++ +This option is only applicable in non-verbose mode. + -r:: --remotes:: List or delete (if used with -d) the remote-tracking branches. @@ -126,6 +135,11 @@ OPTIONS relationship to upstream branch (if any). If given twice, print the name of the upstream branch, as well. +-q:: +--quiet:: + Be more quiet when creating or deleting a branch, suppressing + non-error messages. + --abbrev=<length>:: Alter the sha1's minimum display length in the output listing. The default value is 7 and can be overridden by the `core.abbrev` diff --git a/Documentation/git-bundle.txt b/Documentation/git-bundle.txt index 92b01ec25d..16a6b0aceb 100644 --- a/Documentation/git-bundle.txt +++ b/Documentation/git-bundle.txt @@ -61,7 +61,7 @@ unbundle <file>:: A list of arguments, acceptable to 'git rev-parse' and 'git rev-list' (and containing a named ref, see SPECIFYING REFERENCES below), that specifies the specific objects and references - to transport. For example, `master{tilde}10..master` causes the + to transport. For example, `master~10..master` causes the current master reference to be packaged along with all objects added since its 10th ancestor commit. There is no explicit limit to the number of references and objects that may be @@ -80,12 +80,12 @@ SPECIFYING REFERENCES 'git bundle' will only package references that are shown by 'git show-ref': this includes heads, tags, and remote heads. References -such as `master{tilde}1` cannot be packaged, but are perfectly suitable for +such as `master~1` cannot be packaged, but are perfectly suitable for defining the basis. More than one reference may be packaged, and more than one basis can be specified. The objects packaged are those not contained in the union of the given bases. Each basis can be -specified explicitly (e.g. `^master{tilde}10`), or implicitly (e.g. -`master{tilde}10..master`, `--since=10.days.ago master`). +specified explicitly (e.g. `^master~10`), or implicitly (e.g. +`master~10..master`, `--since=10.days.ago master`). It is very important that the basis used be held by the destination. It is okay to err on the side of caution, causing the bundle file diff --git a/Documentation/git-check-ref-format.txt b/Documentation/git-check-ref-format.txt index 103e7b128d..98009d1bd5 100644 --- a/Documentation/git-check-ref-format.txt +++ b/Documentation/git-check-ref-format.txt @@ -40,9 +40,9 @@ git imposes the following rules on how references are named: . They cannot have ASCII control characters (i.e. bytes whose values are lower than \040, or \177 `DEL`), space, tilde `~`, - caret `{caret}`, or colon `:` anywhere. + caret `^`, or colon `:` anywhere. -. They cannot have question-mark `?`, asterisk `{asterisk}`, or open +. They cannot have question-mark `?`, asterisk `*`, or open bracket `[` anywhere. See the `--refspec-pattern` option below for an exception to this rule. @@ -62,10 +62,10 @@ unquoted (by mistake), and also avoids ambiguities in certain reference name expressions (see linkgit:gitrevisions[7]): . A double-dot `..` is often used as in `ref1..ref2`, and in some - contexts this notation means `{caret}ref1 ref2` (i.e. not in + contexts this notation means `^ref1 ref2` (i.e. not in `ref1` and in `ref2`). -. A tilde `~` and caret `{caret}` are used to introduce the postfix +. A tilde `~` and caret `^` are used to introduce the postfix 'nth parent' and 'peel onion' operation. . A colon `:` is used as in `srcref:dstref` to mean "use srcref\'s @@ -92,9 +92,9 @@ OPTIONS --refspec-pattern:: Interpret <refname> as a reference name pattern for a refspec (as used with remote repositories). If this option is - enabled, <refname> is allowed to contain a single `{asterisk}` + enabled, <refname> is allowed to contain a single `*` in place of a one full pathname component (e.g., - `foo/{asterisk}/bar` but not `foo/bar{asterisk}`). + `foo/*/bar` but not `foo/bar*`). --normalize:: Normalize 'refname' by removing any leading slash (`/`) diff --git a/Documentation/git-checkout.txt b/Documentation/git-checkout.txt index c0a96e6c1e..63a251612a 100644 --- a/Documentation/git-checkout.txt +++ b/Documentation/git-checkout.txt @@ -184,7 +184,7 @@ the conflicted merge in the specified paths. + This means that you can use `git checkout -p` to selectively discard edits from your current working tree. See the ``Interactive Mode'' -section of linkgit:git-add[1] to learn how to operate the `\--patch` mode. +section of linkgit:git-add[1] to learn how to operate the `--patch` mode. <branch>:: Branch to checkout; if it refers to a branch (i.e., a name that, @@ -193,11 +193,11 @@ section of linkgit:git-add[1] to learn how to operate the `\--patch` mode. commit, your HEAD becomes "detached" and you are no longer on any branch (see below for details). + -As a special case, the `"@\{-N\}"` syntax for the N-th last branch +As a special case, the `"@{-N}"` syntax for the N-th last branch checks out the branch (instead of detaching). You may also specify -`-` which is synonymous with `"@\{-1\}"`. +`-` which is synonymous with `"@{-1}"`. + -As a further special case, you may use `"A\...B"` as a shortcut for the +As a further special case, you may use `"A...B"` as a shortcut for the merge base of `A` and `B` if there is exactly one merge base. You can leave out at most one of `A` and `B`, in which case it defaults to `HEAD`. diff --git a/Documentation/git-cherry-pick.txt b/Documentation/git-cherry-pick.txt index fed5097e00..9f3dae631e 100644 --- a/Documentation/git-cherry-pick.txt +++ b/Documentation/git-cherry-pick.txt @@ -103,6 +103,25 @@ effect to your index in a row. cherry-pick'ed commit, then a fast forward to this commit will be performed. +--allow-empty:: + By default, cherry-picking an empty commit will fail, + indicating that an explicit invocation of `git commit + --allow-empty` is required. This option overrides that + behavior, allowing empty commits to be preserved automatically + in a cherry-pick. Note that when "--ff" is in effect, empty + commits that meet the "fast-forward" requirement will be kept + even without this option. Note also, that use of this option only + keeps commits that were initially empty (i.e. the commit recorded the + same tree as its parent). Commits which are made empty due to a + previous commit are dropped. To force the inclusion of those commits + use `--keep-redundant-commits`. + +--keep-redundant-commits:: + If a commit being cherry picked duplicates a commit already in the + current history, it will become empty. By default these + redundant commits are ignored. This option overrides that behavior and + creates an empty commit object. Implies `--allow-empty`. + --strategy=<strategy>:: Use the given merge strategy. Should only be used once. See the MERGE STRATEGIES section in linkgit:git-merge[1] @@ -130,7 +149,7 @@ EXAMPLES Apply the changes introduced by all commits that are ancestors of master but not of HEAD to produce new commits. -`git cherry-pick master{tilde}4 master{tilde}2`:: +`git cherry-pick master~4 master~2`:: Apply the changes introduced by the fifth and third last commits pointed to by master and create 2 new commits with @@ -151,7 +170,7 @@ EXAMPLES are in next but not HEAD to the current branch, creating a new commit for each new change. -`git rev-list --reverse master \-- README | git cherry-pick -n --stdin`:: +`git rev-list --reverse master -- README | git cherry-pick -n --stdin`:: Apply the changes introduced by all commits on the master branch that touched README to the working tree and index, diff --git a/Documentation/git-clone.txt b/Documentation/git-clone.txt index 6e22522c4f..c1ddd4c2cc 100644 --- a/Documentation/git-clone.txt +++ b/Documentation/git-clone.txt @@ -46,13 +46,18 @@ OPTIONS mechanism and clones the repository by making a copy of HEAD and everything under objects and refs directories. The files under `.git/objects/` directory are hardlinked - to save space when possible. This is now the default when - the source repository is specified with `/path/to/repo` - syntax, so it essentially is a no-op option. To force - copying instead of hardlinking (which may be desirable - if you are trying to make a back-up of your repository), - but still avoid the usual "git aware" transport - mechanism, `--no-hardlinks` can be used. + to save space when possible. ++ +If the repository is specified as a local path (e.g., `/path/to/repo`), +this is the default, and --local is essentially a no-op. If the +repository is specified as a URL, then this flag is ignored (and we +never use the local optimizations). Specifying `--no-local` will +override the default when `/path/to/repo` is given, using the regular +git transport instead. ++ +To force copying instead of hardlinking (which may be desirable if you +are trying to make a back-up of your repository), but still avoid the +usual "git aware" transport mechanism, `--no-hardlinks` can be used. --no-hardlinks:: Optimize the cloning process from a repository on a diff --git a/Documentation/git-column.txt b/Documentation/git-column.txt new file mode 100644 index 0000000000..5d6f1cc464 --- /dev/null +++ b/Documentation/git-column.txt @@ -0,0 +1,53 @@ +git-column(1) +============= + +NAME +---- +git-column - Display data in columns + +SYNOPSIS +-------- +[verse] +'git column' [--command=<name>] [--[raw-]mode=<mode>] [--width=<width>] + [--indent=<string>] [--nl=<string>] [--padding=<n>] + +DESCRIPTION +----------- +This command formats its input into multiple columns. + +OPTIONS +------- +--command=<name>:: + Look up layout mode using configuration variable column.<name> and + column.ui. + +--mode=<mode>:: + Specify layout mode. See configuration variable column.ui for option + syntax. + +--raw-mode=<n>:: + Same as --mode but take mode encoded as a number. This is mainly used + by other commands that have already parsed layout mode. + +--width=<width>:: + Specify the terminal width. By default 'git column' will detect the + terminal width, or fall back to 80 if it is unable to do so. + +--indent=<string>:: + String to be printed at the beginning of each line. + +--nl=<N>:: + String to be printed at the end of each line, + including newline character. + +--padding=<N>:: + The number of spaces between columns. One space by default. + + +Author +------ +Written by Nguyen Thai Ngoc Duy <pclouds@gmail.com> + +GIT +--- +Part of the linkgit:git[1] suite diff --git a/Documentation/git-commit-tree.txt b/Documentation/git-commit-tree.txt index cfb9906bb5..ff73286509 100644 --- a/Documentation/git-commit-tree.txt +++ b/Documentation/git-commit-tree.txt @@ -10,7 +10,7 @@ SYNOPSIS -------- [verse] 'git commit-tree' <tree> [(-p <parent>)...] < changelog -'git commit-tree' [(-p <parent>)...] [(-m <message>)...] [(-F <file>)...] <tree> +'git commit-tree' <tree> [(-p <parent>)...] [(-m <message>)...] [(-F <file>)...] DESCRIPTION ----------- @@ -45,7 +45,7 @@ OPTIONS Each '-p' indicates the id of a parent commit object. -m <message>:: - A paragraph in the commig log message. This can be given more than + A paragraph in the commit log message. This can be given more than once and each <message> becomes its own paragraph. -F <file>:: @@ -88,15 +88,6 @@ for one to be entered and terminated with ^D. include::date-formats.txt[] -Diagnostics ------------ -You don't exist. Go away!:: - The passwd(5) gecos field couldn't be read -Your parents must have hated you!:: - The passwd(5) gecos field is longer than a giant static buffer. -Your sysadmin must hate you!:: - The passwd(5) name field is longer than a giant static buffer. - Discussion ---------- diff --git a/Documentation/git-commit.txt b/Documentation/git-commit.txt index 441c2087b9..f400835921 100644 --- a/Documentation/git-commit.txt +++ b/Documentation/git-commit.txt @@ -42,7 +42,7 @@ The content to be added can be specified in several ways: 5. by using the --interactive or --patch switches with the 'commit' command to decide one by one which files or hunks should be part of the commit, - before finalizing the operation. See the ``Interactive Mode`` section of + before finalizing the operation. See the ``Interactive Mode'' section of linkgit:git-add[1] to learn how to operate these modes. The `--dry-run` option can be used to obtain a @@ -295,7 +295,7 @@ When recording your own work, the contents of modified files in your working tree are temporarily stored to a staging area called the "index" with 'git add'. A file can be reverted back, only in the index but not in the working tree, -to that of the last commit with `git reset HEAD \-- <file>`, +to that of the last commit with `git reset HEAD -- <file>`, which effectively reverts 'git add' and prevents the changes to this file from participating in the next commit. After building the state to be committed incrementally with these commands, diff --git a/Documentation/git-config.txt b/Documentation/git-config.txt index 81b03982e3..d9463cb387 100644 --- a/Documentation/git-config.txt +++ b/Documentation/git-config.txt @@ -44,11 +44,15 @@ a "true" or "false" string for bool), or '--path', which does some path expansion (see '--path' below). If no type specifier is passed, no checks or transformations are performed on the value. -The file-option can be one of '--system', '--global' or '--file' -which specify where the values will be read from or written to. -The default is to assume the config file of the current repository, -.git/config unless defined otherwise with GIT_DIR and GIT_CONFIG -(see <<FILES>>). +When reading, the values are read from the system, global and +repository local configuration files by default, and options +'--system', '--global', '--local' and '--file <filename>' can be +used to tell the command to read from only that location (see <<FILES>>). + +When writing, the new value is written to the repository local +configuration file by default, and options '--system', '--global', +'--file <filename>' can be used to tell the command to write to +that location (you can say '--local' but that is the default). This command will fail (with exit code ret) if: @@ -194,9 +198,7 @@ If not set explicitly with '--file', there are three files where 'git config' will search for configuration options: $GIT_DIR/config:: - Repository specific configuration file. (The filename is - of course relative to the repository root, not the working - directory.) + Repository specific configuration file. ~/.gitconfig:: User-specific configuration file. Also called "global" diff --git a/Documentation/git-cvsserver.txt b/Documentation/git-cvsserver.txt index 827bc988ed..88d814af0e 100644 --- a/Documentation/git-cvsserver.txt +++ b/Documentation/git-cvsserver.txt @@ -252,7 +252,7 @@ Configuring database backend 'git-cvsserver' uses the Perl DBI module. Please also read its documentation if changing these variables, especially -about `DBI\->connect()`. +about `DBI->connect()`. gitcvs.dbname:: Database name. The exact meaning depends on the diff --git a/Documentation/git-difftool.txt b/Documentation/git-difftool.txt index fe38f667f9..31fc2e3aed 100644 --- a/Documentation/git-difftool.txt +++ b/Documentation/git-difftool.txt @@ -19,6 +19,12 @@ linkgit:git-diff[1]. OPTIONS ------- +-d:: +--dir-diff:: + Copy the modified files to a temporary location and perform + a directory diff on them. This mode never prompts before + launching the diff tool. + -y:: --no-prompt:: Do not prompt before launching a diff tool. @@ -30,11 +36,9 @@ OPTIONS -t <tool>:: --tool=<tool>:: - Use the diff tool specified by <tool>. - Valid diff tools are: - araxis, bc3, deltawalker, diffuse, emerge, ecmerge, gvimdiff, - kdiff3, kompare, meld, opendiff, p4merge, tkdiff, vimdiff and - xxdiff. + Use the diff tool specified by <tool>. Valid values include + emerge, kompare, meld, and vimdiff. Run `git difftool --tool-help` + for the list of valid <tool> settings. + If a diff tool is not specified, 'git difftool' will use the configuration variable `diff.tool`. If the @@ -62,6 +66,9 @@ of the diff post-image. `$MERGED` is the name of the file which is being compared. `$BASE` is provided for compatibility with custom merge tool commands and has the same value as `$MERGED`. +--tool-help:: + Print a list of diff tools that may be used with `--tool`. + -x <command>:: --extcmd=<command>:: Specify a custom command for viewing diffs. diff --git a/Documentation/git-fast-export.txt b/Documentation/git-fast-export.txt index f37eada63a..d6487e1ce0 100644 --- a/Documentation/git-fast-export.txt +++ b/Documentation/git-fast-export.txt @@ -104,7 +104,7 @@ marks the same across runs. [<git-rev-list-args>...]:: A list of arguments, acceptable to 'git rev-parse' and 'git rev-list', that specifies the specific objects and references - to export. For example, `master{tilde}10..master` causes the + to export. For example, `master~10..master` causes the current master reference to be exported along with all objects added since its 10th ancestor commit. diff --git a/Documentation/git-fast-import.txt b/Documentation/git-fast-import.txt index ec6ef31197..2620d28b4b 100644 --- a/Documentation/git-fast-import.txt +++ b/Documentation/git-fast-import.txt @@ -98,9 +98,10 @@ OPTIONS options. --cat-blob-fd=<fd>:: - Specify the file descriptor that will be written to - when the `cat-blob` command is encountered in the stream. - The default behaviour is to write to `stdout`. + Write responses to `cat-blob` and `ls` queries to the + file descriptor <fd> instead of `stdout`. Allows `progress` + output intended for the end-user to be separated from other + output. --done:: Require a `done` command at the end of the stream. @@ -478,9 +479,9 @@ current branch value should be written as: ---- from refs/heads/branch^0 ---- -The `{caret}0` suffix is necessary as fast-import does not permit a branch to +The `^0` suffix is necessary as fast-import does not permit a branch to start from itself, and the branch is created in memory before the -`from` command is even read from the input. Adding `{caret}0` will force +`from` command is even read from the input. Adding `^0` will force fast-import to resolve the commit through Git's revision parsing library, rather than its internal branch table, thereby loading in the existing value of the branch. @@ -942,6 +943,9 @@ This command can be used anywhere in the stream that comments are accepted. In particular, the `cat-blob` command can be used in the middle of a commit but not in the middle of a `data` command. +See ``Responses To Commands'' below for details about how to read +this output safely. + `ls` ~~~~ Prints information about the object at a path to a file descriptor @@ -975,7 +979,7 @@ Reading from a named tree:: See `filemodify` above for a detailed description of `<path>`. -Output uses the same format as `git ls-tree <tree> {litdd} <path>`: +Output uses the same format as `git ls-tree <tree> -- <path>`: ==== <mode> SP ('blob' | 'tree' | 'commit') SP <dataref> HT <path> LF @@ -991,6 +995,9 @@ instead report missing SP <path> LF ==== +See ``Responses To Commands'' below for details about how to read +this output safely. + `feature` ~~~~~~~~~ Require that fast-import supports the specified feature, or abort if @@ -1079,6 +1086,35 @@ If the `--done` command line option or `feature done` command is in use, the `done` command is mandatory and marks the end of the stream. +Responses To Commands +--------------------- +New objects written by fast-import are not available immediately. +Most fast-import commands have no visible effect until the next +checkpoint (or completion). The frontend can send commands to +fill fast-import's input pipe without worrying about how quickly +they will take effect, which improves performance by simplifying +scheduling. + +For some frontends, though, it is useful to be able to read back +data from the current repository as it is being updated (for +example when the source material describes objects in terms of +patches to be applied to previously imported objects). This can +be accomplished by connecting the frontend and fast-import via +bidirectional pipes: + +==== + mkfifo fast-import-output + frontend <fast-import-output | + git fast-import >fast-import-output +==== + +A frontend set up this way can use `progress`, `ls`, and `cat-blob` +commands to read information from the import in progress. + +To avoid deadlock, such frontends must completely consume any +pending output from `progress`, `ls`, and `cat-blob` before +performing writes to fast-import that might block. + Crash Reports ------------- If fast-import is supplied invalid input it will terminate with a diff --git a/Documentation/git-filter-branch.txt b/Documentation/git-filter-branch.txt index 0f2f117383..81f58234a7 100644 --- a/Documentation/git-filter-branch.txt +++ b/Documentation/git-filter-branch.txt @@ -96,8 +96,8 @@ OPTIONS --index-filter <command>:: This is the filter for rewriting the index. It is similar to the tree filter but does not check out the tree, which makes it much - faster. Frequently used with `git rm \--cached - \--ignore-unmatch ...`, see EXAMPLES below. For hairy + faster. Frequently used with `git rm --cached + --ignore-unmatch ...`, see EXAMPLES below. For hairy cases, see linkgit:git-update-index[1]. --parent-filter <command>:: @@ -222,11 +222,11 @@ However, if the file is absent from the tree of some commit, a simple `rm filename` will fail for that tree and commit. Thus you may instead want to use `rm -f filename` as the script. -Using `\--index-filter` with 'git rm' yields a significantly faster +Using `--index-filter` with 'git rm' yields a significantly faster version. Like with using `rm filename`, `git rm --cached filename` will fail if the file is absent from the tree of a commit. If you want to "completely forget" a file, it does not matter when it entered -history, so we also add `\--ignore-unmatch`: +history, so we also add `--ignore-unmatch`: -------------------------------------------------------------------------- git filter-branch --index-filter 'git rm --cached --ignore-unmatch filename' HEAD @@ -242,8 +242,8 @@ git filter-branch --subdirectory-filter foodir -- --all ------------------------------------------------------- Thus you can, e.g., turn a library subdirectory into a repository of -its own. Note the `\--` that separates 'filter-branch' options from -revision options, and the `\--all` to rewrite all branches and tags. +its own. Note the `--` that separates 'filter-branch' options from +revision options, and the `--all` to rewrite all branches and tags. To set a commit (which typically is at the tip of another history) to be the parent of the current initial commit, in @@ -371,23 +371,23 @@ Checklist for Shrinking a Repository ------------------------------------ git-filter-branch is often used to get rid of a subset of files, -usually with some combination of `\--index-filter` and -`\--subdirectory-filter`. People expect the resulting repository to +usually with some combination of `--index-filter` and +`--subdirectory-filter`. People expect the resulting repository to be smaller than the original, but you need a few more steps to actually make it smaller, because git tries hard not to lose your objects until you tell it to. First make sure that: * You really removed all variants of a filename, if a blob was moved - over its lifetime. `git log \--name-only \--follow \--all \-- - filename` can help you find renames. + over its lifetime. `git log --name-only --follow --all -- filename` + can help you find renames. -* You really filtered all refs: use `\--tag-name-filter cat \-- - \--all` when calling git-filter-branch. +* You really filtered all refs: use `--tag-name-filter cat -- --all` + when calling git-filter-branch. Then there are two ways to get a smaller repository. A safer way is to clone, that keeps your original intact. -* Clone it with `git clone +++file:///path/to/repo+++`. The clone +* Clone it with `git clone file:///path/to/repo`. The clone will not have the removed objects. See linkgit:git-clone[1]. (Note that cloning with a plain path just hardlinks everything!) @@ -397,14 +397,14 @@ approach, so *make a backup* or go back to cloning it. You have been warned. * Remove the original refs backed up by git-filter-branch: say `git - for-each-ref \--format="%(refname)" refs/original/ | xargs -n 1 git + for-each-ref --format="%(refname)" refs/original/ | xargs -n 1 git update-ref -d`. -* Expire all reflogs with `git reflog expire \--expire=now \--all`. +* Expire all reflogs with `git reflog expire --expire=now --all`. -* Garbage collect all unreferenced objects with `git gc \--prune=now` +* Garbage collect all unreferenced objects with `git gc --prune=now` (or if your git-gc is not new enough to support arguments to - `\--prune`, use `git repack -ad; git prune` instead). + `--prune`, use `git repack -ad; git prune` instead). GIT --- diff --git a/Documentation/git-format-patch.txt b/Documentation/git-format-patch.txt index 6ea9be775c..04c7346e3e 100644 --- a/Documentation/git-format-patch.txt +++ b/Documentation/git-format-patch.txt @@ -45,7 +45,7 @@ There are two ways to specify which commits to operate on. The first rule takes precedence in the case of a single <commit>. To apply the second rule, i.e., format everything since the beginning of history up until <commit>, use the '\--root' option: `git format-patch -\--root <commit>`. If you want to format only <commit> itself, you +--root <commit>`. If you want to format only <commit> itself, you can do this with `git format-patch -1 <commit>`. By default, each output file is numbered sequentially from 1, and uses the @@ -134,7 +134,7 @@ include::diff-options.txt[] The optional <style> argument can be either `shallow` or `deep`. 'shallow' threading makes every mail a reply to the head of the series, where the head is chosen from the cover letter, the -`\--in-reply-to`, and the first patch mail, in this order. 'deep' +`--in-reply-to`, and the first patch mail, in this order. 'deep' threading makes every mail a reply to the previous one. + The default is `--no-thread`, unless the 'format.thread' configuration diff --git a/Documentation/git-gc.txt b/Documentation/git-gc.txt index 815afcb922..b370b025b8 100644 --- a/Documentation/git-gc.txt +++ b/Documentation/git-gc.txt @@ -84,7 +84,7 @@ The optional configuration variable 'gc.reflogExpireUnreachable' can be set to indicate how long historical reflog entries which are not part of the current branch should remain available in this repository. These types of entries are generally created as -a result of using `git commit \--amend` or `git rebase` and are the +a result of using `git commit --amend` or `git rebase` and are the commits prior to the amend or rebase occurring. Since these changes are not part of the current project most users will want to expire them sooner. This option defaults to '30 days'. diff --git a/Documentation/git-grep.txt b/Documentation/git-grep.txt index 343eadd407..3bec036883 100644 --- a/Documentation/git-grep.txt +++ b/Documentation/git-grep.txt @@ -31,7 +31,9 @@ SYNOPSIS DESCRIPTION ----------- Look for specified patterns in the tracked files in the work tree, blobs -registered in the index file, or blobs in given tree objects. +registered in the index file, or blobs in given tree objects. Patterns +are lists of one or more search expressions separated by newline +characters. An empty string as search expression matches all lines. CONFIGURATION @@ -247,11 +249,11 @@ OPTIONS Examples -------- -`git grep {apostrophe}time_t{apostrophe} \-- {apostrophe}*.[ch]{apostrophe}`:: +`git grep 'time_t' -- '*.[ch]'`:: Looks for `time_t` in all tracked .c and .h files in the working directory and its subdirectories. -`git grep -e {apostrophe}#define{apostrophe} --and \( -e MAX_PATH -e PATH_MAX \)`:: +`git grep -e '#define' --and \( -e MAX_PATH -e PATH_MAX \)`:: Looks for a line that has `#define` and either `MAX_PATH` or `PATH_MAX`. diff --git a/Documentation/git-index-pack.txt b/Documentation/git-index-pack.txt index 909687fed4..39e6d0ddd8 100644 --- a/Documentation/git-index-pack.txt +++ b/Documentation/git-index-pack.txt @@ -74,6 +74,16 @@ OPTIONS --strict:: Die, if the pack contains broken objects or links. +--threads=<n>:: + Specifies the number of threads to spawn when resolving + deltas. This requires that index-pack be compiled with + pthreads otherwise this option is ignored with a warning. + This is meant to reduce packing time on multiprocessor + machines. The required amount of memory for the delta search + window is however multiplied by the number of threads. + Specifying 0 will cause git to auto-detect the number of CPU's + and use maximum 3 threads. + Note ---- diff --git a/Documentation/git-log.txt b/Documentation/git-log.txt index 249fc878ec..1f906208f9 100644 --- a/Documentation/git-log.txt +++ b/Documentation/git-log.txt @@ -100,7 +100,7 @@ Examples Show all commits since version 'v2.6.12' that changed any file in the include/scsi or drivers/scsi subdirectories -`git log --since="2 weeks ago" \-- gitk`:: +`git log --since="2 weeks ago" -- gitk`:: Show the changes during the last two weeks to the file 'gitk'. The "--" is necessary to avoid confusion with the *branch* named diff --git a/Documentation/git-notes.txt b/Documentation/git-notes.txt index e8319eac69..b95aafae2d 100644 --- a/Documentation/git-notes.txt +++ b/Documentation/git-notes.txt @@ -70,7 +70,7 @@ copy:: second object). This subcommand is equivalent to: `git notes add [-f] -C $(git notes list <from-object>) <to-object>` + -In `\--stdin` mode, take lines in the format +In `--stdin` mode, take lines in the format + ---------- <from-object> SP <to-object> [ SP <rest> ] LF diff --git a/Documentation/git-p4.txt b/Documentation/git-p4.txt index b7c7929716..fe1f49bc6f 100644 --- a/Documentation/git-p4.txt +++ b/Documentation/git-p4.txt @@ -31,13 +31,6 @@ the updated p4 remote branch. EXAMPLE ------- -* Create an alias for 'git p4', using the full path to the 'git-p4' - script if needed: -+ ------------- -$ git config --global alias.p4 '!git-p4' ------------- - * Clone a repository: + ------------ @@ -165,11 +158,14 @@ OPTIONS General options ~~~~~~~~~~~~~~~ -All commands except clone accept this option. +All commands except clone accept these options. --git-dir <dir>:: Set the 'GIT_DIR' environment variable. See linkgit:git[1]. +--verbose:: + Provide more progress information. + Sync options ~~~~~~~~~~~~ These options can be used in the initial 'clone' as well as in @@ -183,6 +179,7 @@ subsequent 'sync' operations. + This example imports a new remote "p4/proj2" into an existing git repository: ++ ---- $ git init $ git p4 sync --branch=refs/remotes/p4/proj2 //depot/proj2 @@ -200,12 +197,13 @@ git repository: --silent:: Do not print any progress information. ---verbose:: - Provide more progress information. - --detect-labels:: Query p4 for labels associated with the depot paths, and add - them as tags in git. + them as tags in git. Limited usefulness as only imports labels + associated with new changelists. Deprecated. + +--import-labels:: + Import labels from p4 into git. --import-local:: By default, p4 branches are stored in 'refs/remotes/p4/', @@ -252,9 +250,6 @@ Submit options ~~~~~~~~~~~~~~ These options can be used to modify 'git p4 submit' behavior. ---verbose:: - Provide more progress information. - --origin <commit>:: Upstream location from which commits are identified to submit to p4. By default, this is the most recent p4 commit reachable @@ -270,6 +265,16 @@ These options can be used to modify 'git p4 submit' behavior. Re-author p4 changes before submitting to p4. This option requires p4 admin privileges. +--export-labels:: + Export tags from git as p4 labels. Tags found in git are applied + to the perforce working directory. + +Rebase options +~~~~~~~~~~~~~~ +These options can be used to modify 'git p4 rebase' behavior. + +--import-labels:: + Import p4 labels. DEPOT PATH SYNTAX ----------------- @@ -311,19 +316,19 @@ configuration file. This allows future 'git p4 submit' commands to work properly; the submit command looks only at the variable and does not have a command-line option. -The full syntax for a p4 view is documented in 'p4 help views'. Git-p4 +The full syntax for a p4 view is documented in 'p4 help views'. 'Git p4' knows only a subset of the view syntax. It understands multi-line mappings, overlays with '+', exclusions with '-' and double-quotes -around whitespace. Of the possible wildcards, git-p4 only handles -'...', and only when it is at the end of the path. Git-p4 will complain +around whitespace. Of the possible wildcards, 'git p4' only handles +'...', and only when it is at the end of the path. 'Git p4' will complain if it encounters an unhandled wildcard. Bugs in the implementation of overlap mappings exist. If multiple depot paths map through overlays to the same location in the repository, -git-p4 can choose the wrong one. This is hard to solve without -dedicating a client spec just for git-p4. +'git p4' can choose the wrong one. This is hard to solve without +dedicating a client spec just for 'git p4'. -The name of the client can be given to git-p4 in multiple ways. The +The name of the client can be given to 'git p4' in multiple ways. The variable 'git-p4.client' takes precedence if it exists. Otherwise, normal p4 mechanisms of determining the client are used: environment variable P4CLIENT, a file referenced by P4CONFIG, or the local host name. @@ -434,11 +439,23 @@ git-p4.branchList:: enabled. Each entry should be a pair of branch names separated by a colon (:). This example declares that both branchA and branchB were created from main: ++ ------------- git config git-p4.branchList main:branchA git config --add git-p4.branchList main:branchB ------------- +git-p4.ignoredP4Labels:: + List of p4 labels to ignore. This is built automatically as + unimportable labels are discovered. + +git-p4.importLabels:: + Import p4 labels into git, as per --import-labels. + +git-p4.labelImportRegexp:: + Only p4 labels matching this regular expression will be imported. The + default value is '[a-zA-Z0-9_\-.]+$'. + git-p4.useClientSpec:: Specify that the p4 client spec should be used to identify p4 depot paths of interest. This is equivalent to specifying the @@ -487,11 +504,18 @@ git-p4.skipUserNameCheck:: user map, 'git p4' exits. This option can be used to force submission regardless. -git-p4.attemptRCSCleanup: - If enabled, 'git p4 submit' will attempt to cleanup RCS keywords - ($Header$, etc). These would otherwise cause merge conflicts and prevent - the submit going ahead. This option should be considered experimental at - present. +git-p4.attemptRCSCleanup:: + If enabled, 'git p4 submit' will attempt to cleanup RCS keywords + ($Header$, etc). These would otherwise cause merge conflicts and prevent + the submit going ahead. This option should be considered experimental at + present. + +git-p4.exportLabels:: + Export git tags to p4 labels, as per --export-labels. + +git-p4.labelExportRegexp:: + Only p4 labels matching this regular expression will be exported. The + default value is '[a-zA-Z0-9_\-.]+$'. IMPLEMENTATION DETAILS ---------------------- diff --git a/Documentation/git-pack-refs.txt b/Documentation/git-pack-refs.txt index a3c6677bfa..10afd4edfe 100644 --- a/Documentation/git-pack-refs.txt +++ b/Documentation/git-pack-refs.txt @@ -32,7 +32,7 @@ Subsequent updates to branches always create new files under A recommended practice to deal with a repository with too many refs is to pack its refs with `--all --prune` once, and -occasionally run `git pack-refs \--prune`. Tags are by +occasionally run `git pack-refs --prune`. Tags are by definition stationary and are not expected to change. Branch heads will be packed with the initial `pack-refs --all`, but only the currently active branch heads will become unpacked, diff --git a/Documentation/git-pull.txt b/Documentation/git-pull.txt index 0f18ec891a..defb544ed0 100644 --- a/Documentation/git-pull.txt +++ b/Documentation/git-pull.txt @@ -110,7 +110,7 @@ include::merge-options.txt[] + See `pull.rebase`, `branch.<name>.rebase` and `branch.autosetuprebase` in linkgit:git-config[1] if you want to make `git pull` always use -`{litdd}rebase` instead of merging. +`--rebase` instead of merging. + [NOTE] This is a potentially _dangerous_ mode of operation. diff --git a/Documentation/git-push.txt b/Documentation/git-push.txt index 48760db337..cb97cc1c3b 100644 --- a/Documentation/git-push.txt +++ b/Documentation/git-push.txt @@ -34,7 +34,7 @@ OPTIONS[[OPTIONS]] <refspec>...:: The format of a <refspec> parameter is an optional plus - `{plus}`, followed by the source ref <src>, followed + `+`, followed by the source ref <src>, followed by a colon `:`, followed by the destination ref <dst>. It is used to specify with what <src> object the <dst> ref in the remote repository is to be updated. @@ -50,7 +50,7 @@ updated. + The object referenced by <src> is used to update the <dst> reference on the remote side, but by default this is only allowed if the -update can fast-forward <dst>. By having the optional leading `{plus}`, +update can fast-forward <dst>. By having the optional leading `+`, you can tell git to update the <dst> ref even when the update is not a fast-forward. This does *not* attempt to merge <src> into <dst>. See EXAMPLES below for details. @@ -60,7 +60,7 @@ EXAMPLES below for details. Pushing an empty <src> allows you to delete the <dst> ref from the remote repository. + -The special refspec `:` (or `{plus}:` to allow non-fast-forward updates) +The special refspec `:` (or `+:` to allow non-fast-forward updates) directs git to push "matching" branches: for every branch that exists on the local side, the remote side is updated if a branch of the same name already exists on the remote side. This is the default operation mode @@ -75,7 +75,7 @@ nor in any Push line of the corresponding remotes file---see below). Remove remote branches that don't have a local counterpart. For example a remote branch `tmp` will be removed if a local branch with the same name doesn't exist any more. This also respects refspecs, e.g. - `git push --prune remote refs/heads/{asterisk}:refs/tmp/{asterisk}` would + `git push --prune remote refs/heads/*:refs/tmp/*` would make sure that remote `refs/tmp/foo` will be removed if `refs/heads/foo` doesn't exist. @@ -170,10 +170,16 @@ useful if you write an alias or script around 'git push'. is specified. This flag forces progress status even if the standard error stream is not directed to a terminal. ---recurse-submodules=check:: - Check whether all submodule commits used by the revisions to be - pushed are available on a remote tracking branch. Otherwise the - push will be aborted and the command will exit with non-zero status. +--recurse-submodules=check|on-demand:: + Make sure all submodule commits used by the revisions to be + pushed are available on a remote tracking branch. If 'check' is + used git will verify that all submodule commits that changed in + the revisions to be pushed are available on at least one remote + of the submodule. If any commits are missing the push will be + aborted and exit with non-zero status. If 'on-demand' is used + all submodules that changed in the revisions to be pushed will + be pushed. If on-demand was not able to push all necessary + revisions it will also be aborted and exit with non-zero status. include::urls-remotes.txt[] @@ -204,7 +210,7 @@ option is used. flag:: A single character indicating the status of the ref: (space);; for a successfully pushed fast-forward; -`{plus}`;; for a successful forced update; +`+`;; for a successful forced update; `-`;; for a successfully deleted ref; `*`;; for a successfully pushed new ref; `!`;; for a ref that was rejected or failed to push; and @@ -214,7 +220,7 @@ summary:: For a successfully pushed ref, the summary shows the old and new values of the ref in a form suitable for using as an argument to `git log` (this is `<old>..<new>` in most cases, and - `<old>\...<new>` for forced non-fast-forward updates). + `<old>...<new>` for forced non-fast-forward updates). + For a failed update, more details are given: + @@ -396,7 +402,7 @@ the ones in the examples below) can be configured as the default for Find a ref that matches `experimental` in the `origin` repository (e.g. `refs/heads/experimental`), and delete it. -`git push origin {plus}dev:master`:: +`git push origin +dev:master`:: Update the origin repository's master branch with the dev branch, allowing non-fast-forward updates. *This can leave unreferenced commits dangling in the origin repository.* Consider the diff --git a/Documentation/git-rebase.txt b/Documentation/git-rebase.txt index 520aaa94fb..147fa1a8e0 100644 --- a/Documentation/git-rebase.txt +++ b/Documentation/git-rebase.txt @@ -238,6 +238,10 @@ leave out at most one of A and B, in which case it defaults to HEAD. will be reset to where it was when the rebase operation was started. +--keep-empty:: + Keep the commits that do not change anything from its + parents in the result. + --skip:: Restart the rebasing process by skipping the current patch. @@ -267,7 +271,7 @@ which makes little sense. -X <strategy-option>:: --strategy-option=<strategy-option>:: Pass the <strategy-option> through to the merge strategy. - This implies `\--merge` and, if no strategy has been + This implies `--merge` and, if no strategy has been specified, `-s recursive`. Note the reversal of 'ours' and 'theirs' as noted in above for the `-m` option. @@ -611,8 +615,8 @@ Easy case: The changes are literally the same.:: Hard case: The changes are not the same.:: This happens if the 'subsystem' rebase had conflicts, or used - `\--interactive` to omit, edit, squash, or fixup commits; or - if the upstream used one of `commit \--amend`, `reset`, or + `--interactive` to omit, edit, squash, or fixup commits; or + if the upstream used one of `commit --amend`, `reset`, or `filter-branch`. @@ -648,7 +652,7 @@ correspond to the ones before the rebase. NOTE: While an "easy case recovery" sometimes appears to be successful even in the hard case, it may have unintended consequences. For example, a commit that was removed via `git rebase - \--interactive` will be **resurrected**! + --interactive` will be **resurrected**! The idea is to manually tell 'git rebase' "where the old 'subsystem' ended and your 'topic' began", that is, what the old merge-base @@ -656,7 +660,7 @@ between them was. You will have to find a way to name the last commit of the old 'subsystem', for example: * With the 'subsystem' reflog: after 'git fetch', the old tip of - 'subsystem' is at `subsystem@\{1}`. Subsequent fetches will + 'subsystem' is at `subsystem@{1}`. Subsequent fetches will increase the number. (See linkgit:git-reflog[1].) * Relative to the tip of 'topic': knowing that your 'topic' has three diff --git a/Documentation/git-reflog.txt b/Documentation/git-reflog.txt index 976dc14937..7fe2d2247b 100644 --- a/Documentation/git-reflog.txt +++ b/Documentation/git-reflog.txt @@ -39,13 +39,13 @@ as well). It is an alias for `git log -g --abbrev-commit --pretty=oneline`; see linkgit:git-log[1]. The reflog is useful in various git commands, to specify the old value -of a reference. For example, `HEAD@\{2\}` means "where HEAD used to be -two moves ago", `master@\{one.week.ago\}` means "where master used to +of a reference. For example, `HEAD@{2}` means "where HEAD used to be +two moves ago", `master@{one.week.ago}` means "where master used to point to one week ago", and so on. See linkgit:gitrevisions[7] for more details. To delete single entries from the reflog, use the subcommand "delete" -and specify the _exact_ entry (e.g. "`git reflog delete master@\{2\}`"). +and specify the _exact_ entry (e.g. "`git reflog delete master@{2}`"). OPTIONS diff --git a/Documentation/git-remote-helpers.txt b/Documentation/git-remote-helpers.txt index 674797cd83..f5836e46d0 100644 --- a/Documentation/git-remote-helpers.txt +++ b/Documentation/git-remote-helpers.txt @@ -87,7 +87,7 @@ to the `capabilities` command (see COMMANDS, below). capability use this. + A helper advertising the capability -`refspec refs/heads/{asterisk}:refs/svn/origin/branches/{asterisk}` +`refspec refs/heads/*:refs/svn/origin/branches/*` is saying that, when it is asked to `import refs/heads/topic`, the stream it outputs will update the `refs/svn/origin/branches/topic` ref. @@ -96,7 +96,7 @@ This capability can be advertised multiple times. The first applicable refspec takes precedence. The left-hand of refspecs advertised with this capability must cover all refs reported by the list command. If no 'refspec' capability is advertised, -there is an implied `refspec {asterisk}:{asterisk}`. +there is an implied `refspec *:*`. Capabilities for Pushing ~~~~~~~~~~~~~~~~~~~~~~~~ @@ -148,7 +148,7 @@ Other frontends may have some other order of preference. This modifies the 'import' capability. + A helper advertising -`refspec refs/heads/{asterisk}:refs/svn/origin/branches/{asterisk}` +`refspec refs/heads/*:refs/svn/origin/branches/*` in its capabilities is saying that, when it handles `import refs/heads/topic`, the stream it outputs will update the `refs/svn/origin/branches/topic` ref. @@ -157,7 +157,7 @@ This capability can be advertised multiple times. The first applicable refspec takes precedence. The left-hand of refspecs advertised with this capability must cover all refs reported by the list command. If no 'refspec' capability is advertised, -there is an implied `refspec {asterisk}:{asterisk}`. +there is an implied `refspec *:*`. INVOCATION ---------- diff --git a/Documentation/git-remote.txt b/Documentation/git-remote.txt index d376d19ef7..a308f4c79f 100644 --- a/Documentation/git-remote.txt +++ b/Documentation/git-remote.txt @@ -67,14 +67,14 @@ multiple branches without grabbing all branches. With `-m <master>` option, a symbolic-ref `refs/remotes/<name>/HEAD` is set up to point at remote's `<master>` branch. See also the set-head command. + -When a fetch mirror is created with `\--mirror=fetch`, the refs will not +When a fetch mirror is created with `--mirror=fetch`, the refs will not be stored in the 'refs/remotes/' namespace, but rather everything in 'refs/' on the remote will be directly mirrored into 'refs/' in the local repository. This option only makes sense in bare repositories, because a fetch would overwrite any local commits. + -When a push mirror is created with `\--mirror=push`, then `git push` -will always behave as if `\--mirror` was passed. +When a push mirror is created with `--mirror=push`, then `git push` +will always behave as if `--mirror` was passed. 'rename':: diff --git a/Documentation/git-rerere.txt b/Documentation/git-rerere.txt index b43b7c8c0e..a62227f84e 100644 --- a/Documentation/git-rerere.txt +++ b/Documentation/git-rerere.txt @@ -101,15 +101,15 @@ One way to do it is to pull master into the topic branch: The commits marked with `*` touch the same area in the same file; you need to resolve the conflicts when creating the commit -marked with `{plus}`. Then you can test the result to make sure your +marked with `+`. Then you can test the result to make sure your work-in-progress still works with what is in the latest master. After this test merge, there are two ways to continue your work on the topic. The easiest is to build on top of the test merge -commit `{plus}`, and when your work in the topic branch is finally +commit `+`, and when your work in the topic branch is finally ready, pull the topic branch into master, and/or ask the upstream to pull from you. By that time, however, the master or -the upstream might have been advanced since the test merge `{plus}`, +the upstream might have been advanced since the test merge `+`, in which case the final commit graph would look like this: ------------ diff --git a/Documentation/git-reset.txt b/Documentation/git-reset.txt index b674866e6d..117e3743a6 100644 --- a/Documentation/git-reset.txt +++ b/Documentation/git-reset.txt @@ -41,7 +41,7 @@ working tree in one go. + This means that `git reset -p` is the opposite of `git add -p`, i.e. you can use it to selectively reset hunks. See the ``Interactive Mode'' -section of linkgit:git-add[1] to learn how to operate the `\--patch` mode. +section of linkgit:git-add[1] to learn how to operate the `--patch` mode. 'git reset' --<mode> [<commit>]:: This form resets the current branch head to <commit> and diff --git a/Documentation/git-rev-parse.txt b/Documentation/git-rev-parse.txt index 8023dc086d..4cc3e9586f 100644 --- a/Documentation/git-rev-parse.txt +++ b/Documentation/git-rev-parse.txt @@ -113,15 +113,14 @@ OPTIONS + If a `pattern` is given, only refs matching the given shell glob are shown. If the pattern does not contain a globbing character (`?`, -`{asterisk}`, or `[`), it is turned into a prefix match by -appending `/{asterisk}`. +`*`, or `[`), it is turned into a prefix match by appending `/*`. --glob=pattern:: Show all refs matching the shell glob pattern `pattern`. If the pattern does not start with `refs/`, this is automatically prepended. If the pattern does not contain a globbing - character (`?`, `{asterisk}`, or `[`), it is turned into a prefix - match by appending `/{asterisk}`. + character (`?`, `*`, or `[`), it is turned into a prefix + match by appending `/*`. --show-toplevel:: Show the absolute path of the top-level directory. @@ -138,7 +137,8 @@ appending `/{asterisk}`. --git-dir:: Show `$GIT_DIR` if defined. Otherwise show the path to - the .git directory, relative to the current directory. + the .git directory. The path shown, when relative, is + relative to the current working directory. + If `$GIT_DIR` is not defined and the current directory is not detected to lie in a git repository or work tree diff --git a/Documentation/git-revert.txt b/Documentation/git-revert.txt index b699a3458e..70152e8b1e 100644 --- a/Documentation/git-revert.txt +++ b/Documentation/git-revert.txt @@ -27,7 +27,7 @@ throw away all uncommitted changes in your working directory, you should see linkgit:git-reset[1], particularly the '--hard' option. If you want to extract specific files as they were in another commit, you should see linkgit:git-checkout[1], specifically the `git checkout -<commit> \-- <filename>` syntax. Take care with these alternatives as +<commit> -- <filename>` syntax. Take care with these alternatives as both will discard uncommitted changes in your working directory. OPTIONS @@ -105,7 +105,7 @@ EXAMPLES Revert the changes specified by the fourth last commit in HEAD and create a new commit with the reverted changes. -`git revert -n master{tilde}5..master{tilde}2`:: +`git revert -n master~5..master~2`:: Revert the changes done by commits from the fifth last commit in master (included) to the third last commit in master diff --git a/Documentation/git-rm.txt b/Documentation/git-rm.txt index 665ad4ddab..5d31860eb1 100644 --- a/Documentation/git-rm.txt +++ b/Documentation/git-rm.txt @@ -79,8 +79,7 @@ a file that you have not told git about does not remove that file. File globbing matches across directory boundaries. Thus, given two directories `d` and `d2`, there is a difference between -using `git rm {apostrophe}d{asterisk}{apostrophe}` and -`git rm {apostrophe}d/{asterisk}{apostrophe}`, as the former will +using `git rm 'd*'` and `git rm 'd/*'`, as the former will also remove all of directory `d2`. REMOVING FILES THAT HAVE DISAPPEARED FROM THE FILESYSTEM diff --git a/Documentation/git-shortlog.txt b/Documentation/git-shortlog.txt index ff3755b4c7..01d8417316 100644 --- a/Documentation/git-shortlog.txt +++ b/Documentation/git-shortlog.txt @@ -47,7 +47,7 @@ OPTIONS --format[=<format>]:: Instead of the commit subject, use some other information to describe each commit. '<format>' can be any string accepted - by the `--format` option of 'git log', such as '{asterisk} [%h] %s'. + by the `--format` option of 'git log', such as '* [%h] %s'. (See the "PRETTY FORMATS" section of linkgit:git-log[1].) Each pretty-printed commit will be rewrapped before it is shown. diff --git a/Documentation/git-show-ref.txt b/Documentation/git-show-ref.txt index fcee0008a9..5dbcd47fec 100644 --- a/Documentation/git-show-ref.txt +++ b/Documentation/git-show-ref.txt @@ -73,7 +73,7 @@ OPTIONS --exclude-existing[=<pattern>]:: Make 'git show-ref' act as a filter that reads refs from stdin of the - form "`{caret}(?:<anything>\s)?<refname>(?:{backslash}{caret}{})?$`" + form "`^(?:<anything>\s)?<refname>(?:\^{})?$`" and performs the following actions on each: (1) strip "{caret}{}" at the end of line if any; (2) ignore if pattern is provided and does not head-match refname; diff --git a/Documentation/git-show.txt b/Documentation/git-show.txt index 1e38819e67..ae4edcccfb 100644 --- a/Documentation/git-show.txt +++ b/Documentation/git-show.txt @@ -52,10 +52,10 @@ EXAMPLES Shows the tag `v1.0.0`, along with the object the tags points at. -`git show v1.0.0^\{tree\}`:: +`git show v1.0.0^{tree}`:: Shows the tree pointed to by the tag `v1.0.0`. -`git show -s --format=%s v1.0.0^\{commit\}`:: +`git show -s --format=%s v1.0.0^{commit}`:: Shows the subject of the commit pointed to by the tag `v1.0.0`. diff --git a/Documentation/git-stash.txt b/Documentation/git-stash.txt index 43af38aa4b..0aa4e20eae 100644 --- a/Documentation/git-stash.txt +++ b/Documentation/git-stash.txt @@ -36,8 +36,8 @@ you create one. The latest stash you created is stored in `refs/stash`; older stashes are found in the reflog of this reference and can be named using -the usual reflog syntax (e.g. `stash@\{0}` is the most recently -created stash, `stash@\{1}` is the one before it, `stash@\{2.hours.ago}` +the usual reflog syntax (e.g. `stash@{0}` is the most recently +created stash, `stash@{1}` is the one before it, `stash@{2.hours.ago}` is also possible). OPTIONS @@ -66,7 +66,7 @@ constructed such that its index state is the same as the index state of your repository, and its worktree contains only the changes you selected interactively. The selected changes are then rolled back from your worktree. See the ``Interactive Mode'' section of -linkgit:git-add[1] to learn how to operate the `\--patch` mode. +linkgit:git-add[1] to learn how to operate the `--patch` mode. + The `--patch` option implies `--keep-index`. You can use `--no-keep-index` to override this. @@ -74,7 +74,7 @@ The `--patch` option implies `--keep-index`. You can use list [<options>]:: List the stashes that you currently have. Each 'stash' is listed - with its name (e.g. `stash@\{0}` is the latest stash, `stash@\{1}` is + with its name (e.g. `stash@{0}` is the latest stash, `stash@{1}` is the one before, etc.), the name of the branch that was current when the stash was made, and a short description of the commit the stash was based on. @@ -93,7 +93,7 @@ show [<stash>]:: stashed state and its original parent. When no `<stash>` is given, shows the latest one. By default, the command shows the diffstat, but it will accept any format known to 'git diff' (e.g., `git stash show - -p stash@\{1}` to view the second most recent stash in patch form). + -p stash@{1}` to view the second most recent stash in patch form). pop [--index] [-q|--quiet] [<stash>]:: @@ -111,8 +111,8 @@ tree's changes, but also the index's ones. However, this can fail, when you have conflicts (which are stored in the index, where you therefore can no longer apply the changes as they were originally). + -When no `<stash>` is given, `stash@\{0}` is assumed, otherwise `<stash>` must -be a reference of the form `stash@\{<revision>}`. +When no `<stash>` is given, `stash@{0}` is assumed, otherwise `<stash>` must +be a reference of the form `stash@{<revision>}`. apply [--index] [-q|--quiet] [<stash>]:: @@ -143,9 +143,9 @@ clear:: drop [-q|--quiet] [<stash>]:: Remove a single stashed state from the stash list. When no `<stash>` - is given, it removes the latest one. i.e. `stash@\{0}`, otherwise + is given, it removes the latest one. i.e. `stash@{0}`, otherwise `<stash>` must a valid stash log reference of the form - `stash@\{<revision>}`. + `stash@{<revision>}`. create:: diff --git a/Documentation/git-status.txt b/Documentation/git-status.txt index 3d51717bbe..67e5f53a9e 100644 --- a/Documentation/git-status.txt +++ b/Documentation/git-status.txt @@ -77,6 +77,13 @@ configuration variable documented in linkgit:git-config[1]. Terminate entries with NUL, instead of LF. This implies the `--porcelain` output format if no other format is given. +--column[=<options>]:: +--no-column:: + Display untracked files in columns. See configuration variable + column.status for option syntax.`--column` and `--no-column` + without options are equivalent to 'always' and 'never' + respectively. + OUTPUT ------ @@ -98,12 +105,12 @@ In the short-format, the status of each path is shown as XY PATH1 -> PATH2 -where `PATH1` is the path in the `HEAD`, and the ` \-> PATH2` part is +where `PATH1` is the path in the `HEAD`, and the " `-> PATH2`" part is shown only when `PATH1` corresponds to a different path in the index/worktree (i.e. the file is renamed). The 'XY' is a two-letter status code. -The fields (including the `\->`) are separated from each other by a +The fields (including the `->`) are separated from each other by a single space. If a filename contains whitespace or other nonprintable characters, that field will be quoted in the manner of a C string literal: surrounded by ASCII double quote (34) characters, and with @@ -177,7 +184,7 @@ order is reversed (e.g 'from \-> to' becomes 'to from'). Second, a NUL and the terminating newline (but a space still separates the status field from the first filename). Third, filenames containing special characters are not specially formatted; no quoting or -backslash-escaping is performed. Fourth, there is no branch line. +backslash-escaping is performed. CONFIGURATION ------------- diff --git a/Documentation/git-submodule.txt b/Documentation/git-submodule.txt index c243ee552b..fbbbcb282c 100644 --- a/Documentation/git-submodule.txt +++ b/Documentation/git-submodule.txt @@ -43,9 +43,9 @@ if you choose to go that route. Submodules are composed from a so-called `gitlink` tree entry in the main repository that refers to a particular commit object within the inner repository that is completely separate. -A record in the `.gitmodules` file at the root of the source -tree assigns a logical name to the submodule and describes -the default URL the submodule shall be cloned from. +A record in the `.gitmodules` (see linkgit:gitmodules[5]) file at the +root of the source tree assigns a logical name to the submodule and +describes the default URL the submodule shall be cloned from. The logical name can be used for overriding this URL within your local repository configuration (see 'submodule init'). @@ -140,7 +140,8 @@ update:: checkout the commit specified in the index of the containing repository. This will make the submodules HEAD be detached unless `--rebase` or `--merge` is specified or the key `submodule.$name.update` is set to - `rebase`, `merge` or `none`. + `rebase`, `merge` or `none`. `none` can be overridden by specifying + `--checkout`. + If the submodule is not yet initialized, and you just want to use the setting as stored in .gitmodules, you can automatically initialize the @@ -148,10 +149,6 @@ submodule with the `--init` option. + If `--recursive` is specified, this command will recurse into the registered submodules, and update any nested submodules within. -+ -If the configuration key `submodule.$name.update` is set to `none` the -submodule with name `$name` will not be updated by default. This can be -overriden by adding `--checkout` to the command. summary:: Show commit summary between the given commit (defaults to HEAD) and diff --git a/Documentation/git-svn.txt b/Documentation/git-svn.txt index 34ee785064..cfe8d2b5df 100644 --- a/Documentation/git-svn.txt +++ b/Documentation/git-svn.txt @@ -189,18 +189,16 @@ and have no uncommitted changes. last fetched commit from the upstream SVN. 'dcommit':: - Commit each diff from a specified head directly to the SVN + Commit each diff from the current branch directly to the SVN repository, and then rebase or reset (depending on whether or not there is a diff between SVN and head). This will create a revision in SVN for each commit in git. - It is recommended that you run 'git svn' fetch and rebase (not - pull or merge) your commits against the latest changes in the - SVN repository. - An optional revision or branch argument may be specified, and - causes 'git svn' to do all work on that revision/branch - instead of HEAD. - This is advantageous over 'set-tree' (below) because it produces - cleaner, more linear history. ++ +When an optional git branch name (or a git commit object name) +is specified as an argument, the subcommand works on the specified +branch, not on the current branch. ++ +Use of 'dcommit' is preferred to 'set-tree' (below). + --no-rebase;; After committing, do not rebase or reset. @@ -572,6 +570,8 @@ config key: svn.repackflags --merge:: -s<strategy>:: --strategy=<strategy>:: +-p:: +--preserve-merges:: These are only used with the 'dcommit' and 'rebase' commands. + Passed directly to 'git rebase' when using 'dcommit' if a @@ -800,18 +800,19 @@ have each person clone that repository with 'git clone': REBASE VS. PULL/MERGE --------------------- - -Originally, 'git svn' recommended that the 'remotes/git-svn' branch be -pulled or merged from. This is because the author favored +Prefer to use 'git svn rebase' or 'git rebase', rather than +'git pull' or 'git merge' to synchronize unintegrated commits with a 'git svn' +branch. Doing so will keep the history of unintegrated commits linear with +respect to the upstream SVN repository and allow the use of the preferred +'git svn dcommit' subcommand to push unintegrated commits back into SVN. + +Originally, 'git svn' recommended that developers pulled or merged from +the 'git svn' branch. This was because the author favored `git svn set-tree B` to commit a single head rather than the -`git svn set-tree A..B` notation to commit multiple commits. - -If you use `git svn set-tree A..B` to commit several diffs and you do -not have the latest remotes/git-svn merged into my-branch, you should -use `git svn rebase` to update your work branch instead of `git pull` or -`git merge`. `pull`/`merge` can cause non-linear history to be flattened -when committing into SVN, which can lead to merge commits reversing -previous commits in SVN. +`git svn set-tree A..B` notation to commit multiple commits. Use of +'git pull' or 'git merge' with `git svn set-tree A..B` will cause non-linear +history to be flattened when committing into SVN and this can lead to merge +commits unexpectedly reversing previous commits in SVN. MERGE TRACKING -------------- diff --git a/Documentation/git-tag.txt b/Documentation/git-tag.txt index 8d32b9a814..e36a7c3d1e 100644 --- a/Documentation/git-tag.txt +++ b/Documentation/git-tag.txt @@ -13,6 +13,7 @@ SYNOPSIS <tagname> [<commit> | <object>] 'git tag' -d <tagname>... 'git tag' [-n[<num>]] -l [--contains <commit>] [--points-at <object>] + [--column[=<options>] | --no-column] [<pattern>...] [<pattern>...] 'git tag' -v <tagname>... @@ -84,6 +85,14 @@ OPTIONS using fnmatch(3)). Multiple patterns may be given; if any of them matches, the tag is shown. +--column[=<options>]:: +--no-column:: + Display tag listing in columns. See configuration variable + column.tag for option syntax.`--column` and `--no-column` + without options are equivalent to 'always' and 'never' respectively. ++ +This option is only applicable when listing tags without annotation lines. + --contains <commit>:: Only list tags which contain the specified commit. diff --git a/Documentation/git-tar-tree.txt b/Documentation/git-tar-tree.txt index 346e7a2079..f7362dc2d1 100644 --- a/Documentation/git-tar-tree.txt +++ b/Documentation/git-tar-tree.txt @@ -63,7 +63,7 @@ EXAMPLES Create a tarball for v1.4.0 release. -`git tar-tree v1.4.0{caret}\{tree\} git-1.4.0 | gzip >git-1.4.0.tar.gz`:: +`git tar-tree v1.4.0^{tree} git-1.4.0 | gzip >git-1.4.0.tar.gz`:: Create a tarball for v1.4.0 release, but without a global extended pax header. diff --git a/Documentation/git-update-index.txt b/Documentation/git-update-index.txt index a3081f4e23..9d0b1515c5 100644 --- a/Documentation/git-update-index.txt +++ b/Documentation/git-update-index.txt @@ -19,7 +19,7 @@ SYNOPSIS [--ignore-submodules] [--really-refresh] [--unresolve] [--again | -g] [--info-only] [--index-info] - [-z] [--stdin] + [-z] [--stdin] [--index-version <n>] [--verbose] [--] [<file>...] @@ -143,6 +143,10 @@ you will need to handle the situation manually. --verbose:: Report what is being added and removed from index. +--index-version <n>:: + Write the resulting index out in the named on-disk format version. + The current default version is 2. + -z:: Only meaningful with `--stdin` or `--index-info`; paths are separated with NUL character instead of LF. diff --git a/Documentation/git-var.txt b/Documentation/git-var.txt index 5317cc2474..67edf58689 100644 --- a/Documentation/git-var.txt +++ b/Documentation/git-var.txt @@ -43,22 +43,21 @@ GIT_EDITOR:: `$SOME_ENVIRONMENT_VARIABLE`, `"C:\Program Files\Vim\gvim.exe" --nofork`. The order of preference is the `$GIT_EDITOR` environment variable, then `core.editor` configuration, then - `$VISUAL`, then `$EDITOR`, and then finally 'vi'. + `$VISUAL`, then `$EDITOR`, and then the default chosen at compile + time, which is usually 'vi'. +ifdef::git-default-editor[] + The build you are using chose '{git-default-editor}' as the default. +endif::git-default-editor[] GIT_PAGER:: Text viewer for use by git commands (e.g., 'less'). The value is meant to be interpreted by the shell. The order of preference is the `$GIT_PAGER` environment variable, then `core.pager` - configuration, then `$PAGER`, and then finally 'less'. - -Diagnostics ------------ -You don't exist. Go away!:: - The passwd(5) gecos field couldn't be read -Your parents must have hated you!:: - The passwd(5) gecos field is longer than a giant static buffer. -Your sysadmin must hate you!:: - The passwd(5) name field is longer than a giant static buffer. + configuration, then `$PAGER`, and then the default chosen at + compile time (usually 'less'). +ifdef::git-default-pager[] + The build you are using chose '{git-default-pager}' as the default. +endif::git-default-pager[] SEE ALSO -------- diff --git a/Documentation/git-whatchanged.txt b/Documentation/git-whatchanged.txt index 76c7f7eec5..6c8f510c3f 100644 --- a/Documentation/git-whatchanged.txt +++ b/Documentation/git-whatchanged.txt @@ -58,7 +58,7 @@ Examples Show as patches the commits since version 'v2.6.12' that changed any file in the include/scsi or drivers/scsi subdirectories -`git whatchanged --since="2 weeks ago" \-- gitk`:: +`git whatchanged --since="2 weeks ago" -- gitk`:: Show the changes during the last two weeks to the file 'gitk'. The "--" is necessary to avoid confusion with the *branch* named diff --git a/Documentation/git.txt b/Documentation/git.txt index 8527775988..d58fad71bd 100644 --- a/Documentation/git.txt +++ b/Documentation/git.txt @@ -44,9 +44,19 @@ unreleased) version of git, that is available from 'master' branch of the `git.git` repository. Documentation for older releases are available here: -* link:v1.7.10.1/git.html[documentation for release 1.7.10.1] +* link:v1.7.11.1/git.html[documentation for release 1.7.11.1] * release notes for + link:RelNotes/1.7.11.1.txt[1.7.11.1], + link:RelNotes/1.7.11.txt[1.7.11]. + +* link:v1.7.10.5/git.html[documentation for release 1.7.10.5] + +* release notes for + link:RelNotes/1.7.10.5.txt[1.7.10.5], + link:RelNotes/1.7.10.4.txt[1.7.10.4], + link:RelNotes/1.7.10.3.txt[1.7.10.3], + link:RelNotes/1.7.10.2.txt[1.7.10.2], link:RelNotes/1.7.10.1.txt[1.7.10.1], link:RelNotes/1.7.10.txt[1.7.10]. @@ -725,7 +735,7 @@ other 'GIT_EDITOR':: This environment variable overrides `$EDITOR` and `$VISUAL`. - It is used by several git comands when, on interactive mode, + It is used by several git commands when, on interactive mode, an editor is to be launched. See also linkgit:git-var[1] and the `core.editor` option in linkgit:git-config[1]. diff --git a/Documentation/gitcli.txt b/Documentation/gitcli.txt index f734f97b8e..ea17f7a53b 100644 --- a/Documentation/gitcli.txt +++ b/Documentation/gitcli.txt @@ -25,22 +25,22 @@ arguments. Here are the rules: are paths. * When an argument can be misunderstood as either a revision or a path, - they can be disambiguated by placing `\--` between them. - E.g. `git diff \-- HEAD` is, "I have a file called HEAD in my work + they can be disambiguated by placing `--` between them. + E.g. `git diff -- HEAD` is, "I have a file called HEAD in my work tree. Please show changes between the version I staged in the index and what I have in the work tree for that file". not "show difference between the HEAD commit and the work tree as a whole". You can say - `git diff HEAD \--` to ask for the latter. + `git diff HEAD --` to ask for the latter. - * Without disambiguating `\--`, git makes a reasonable guess, but errors + * Without disambiguating `--`, git makes a reasonable guess, but errors out and asking you to disambiguate when ambiguous. E.g. if you have a file called HEAD in your work tree, `git diff HEAD` is ambiguous, and - you have to say either `git diff HEAD \--` or `git diff \-- HEAD` to + you have to say either `git diff HEAD --` or `git diff -- HEAD` to disambiguate. When writing a script that is expected to handle random user-input, it is a good practice to make it explicit which arguments are which by placing -disambiguating `\--` at appropriate places. +disambiguating `--` at appropriate places. Here are the rules regarding the "flags" that you should follow when you are scripting git: diff --git a/Documentation/gitcore-tutorial.txt b/Documentation/gitcore-tutorial.txt index fb0d5692a4..9d893369a0 100644 --- a/Documentation/gitcore-tutorial.txt +++ b/Documentation/gitcore-tutorial.txt @@ -151,8 +151,8 @@ to your working tree, you use the 'git update-index' program. That program normally just takes a list of filenames you want to update, but to avoid trivial mistakes, it refuses to add new entries to the index (or remove existing ones) unless you explicitly tell it that you're -adding a new entry with the `\--add` flag (or removing an entry with the -`\--remove`) flag. +adding a new entry with the `--add` flag (or removing an entry with the +`--remove`) flag. So to populate the index with the two files you just created, you can do @@ -399,10 +399,10 @@ $ git diff HEAD which ends up doing the above for you. In other words, 'git diff-index' normally compares a tree against the -working tree, but when given the `\--cached` flag, it is told to +working tree, but when given the `--cached` flag, it is told to instead compare against just the index cache contents, and ignore the current working tree state entirely. Since we just wrote the index -file to HEAD, doing `git diff-index \--cached -p HEAD` should thus return +file to HEAD, doing `git diff-index --cached -p HEAD` should thus return an empty set of differences, and that's exactly what it does. [NOTE] @@ -411,7 +411,7 @@ an empty set of differences, and that's exactly what it does. comparisons, and saying that it compares a tree against the working tree is thus not strictly accurate. In particular, the list of files to compare (the "meta-data") *always* comes from the index file, -regardless of whether the `\--cached` flag is used or not. The `\--cached` +regardless of whether the `--cached` flag is used or not. The `--cached` flag really only determines whether the file *contents* to be compared come from the working tree or not. @@ -433,7 +433,7 @@ update the index cache: $ git update-index hello ------------------------------------------------ -(note how we didn't need the `\--add` flag this time, since git knew +(note how we didn't need the `--add` flag this time, since git knew about the file already). Note what happens to the different 'git diff-{asterisk}' versions here. @@ -560,7 +560,7 @@ short history. When using the above two commands, the initial commit will be shown. If this is a problem because it is huge, you can hide it by setting the log.showroot configuration variable to false. Having this, you -can still show it for each command just adding the `\--root` option, +can still show it for each command just adding the `--root` option, which is a flag for 'git diff-tree' accepted by both commands. With that, you should now be having some inkling of what git does, and @@ -881,7 +881,7 @@ helps you view what's going on: $ gitk --all ---------------- -will show you graphically both of your branches (that's what the `\--all` +will show you graphically both of your branches (that's what the `--all` means: normally it will just show you your current `HEAD`) and their histories. You can also see exactly how they came to be from a common source. @@ -935,7 +935,7 @@ which will very loudly warn you that you're now committing a merge (which is correct, so never mind), and you can write a small merge message about your adventures in 'git merge'-land. -After you're done, start up `gitk \--all` to see graphically what the +After you're done, start up `gitk --all` to see graphically what the history looks like. Notice that `mybranch` still exists, and you can switch to it, and continue to work with it if you want to. The `mybranch` branch will not contain the merge, but next time you merge it @@ -958,11 +958,11 @@ $ git show-branch --topo-order --more=1 master mybranch The first two lines indicate that it is showing the two branches and the first line of the commit log message from their top-of-the-tree commits, you are currently on `master` branch -(notice the asterisk `{asterisk}` character), and the first column for +(notice the asterisk `*` character), and the first column for the later output lines is used to show commits contained in the `master` branch, and the second column for the `mybranch` branch. Three commits are shown along with their log messages. -All of them have non blank characters in the first column (`{asterisk}` +All of them have non blank characters in the first column (`*` shows an ordinary commit on the current branch, `-` is a merge commit), which means they are now part of the `master` branch. Only the "Some work" commit has the plus `+` character in the second column, @@ -1002,8 +1002,8 @@ would be different) ---------------- Updating from ae3a2da... to a80b4aa.... Fast-forward (no commit created; -m option ignored) - example | 1 + - hello | 1 + + example | 1 + + hello | 1 + 2 files changed, 2 insertions(+) ---------------- @@ -1013,7 +1013,7 @@ not actually do a merge. Instead, it just updated the top of the tree of your branch to that of the `master` branch. This is often called 'fast-forward' merge. -You can run `gitk \--all` again to see how the commit ancestry +You can run `gitk --all` again to see how the commit ancestry looks like, or run 'show-branch', which tells you this. ------------------------------------------------ @@ -1257,7 +1257,7 @@ this 'collapsing' tends to trivially merge most of the paths fairly quickly, leaving only a handful of real changes in non-zero stages. -To look at only non-zero stages, use `\--unmerged` flag: +To look at only non-zero stages, use `--unmerged` flag: ------------ $ git ls-files --unmerged @@ -1420,7 +1420,7 @@ packed, and stores the packed file in `.git/objects/pack` directory. [NOTE] -You will see two files, `pack-{asterisk}.pack` and `pack-{asterisk}.idx`, +You will see two files, `pack-*.pack` and `pack-*.idx`, in `.git/objects/pack` directory. They are closely related to each other, and if you ever copy them by hand to a different repository for whatever reason, you should make sure you copy diff --git a/Documentation/gitcredentials.txt b/Documentation/gitcredentials.txt index 066f825f2e..7dfffc0046 100644 --- a/Documentation/gitcredentials.txt +++ b/Documentation/gitcredentials.txt @@ -143,8 +143,8 @@ CONFIGURATION OPTIONS --------------------- Options for a credential context can be configured either in -`credential.\*` (which applies to all credentials), or -`credential.<url>.\*`, where <url> matches the context as described +`credential.*` (which applies to all credentials), or +`credential.<url>.*`, where <url> matches the context as described above. The following options are available in either location: diff --git a/Documentation/gitdiffcore.txt b/Documentation/gitdiffcore.txt index 370624c171..daf1782a31 100644 --- a/Documentation/gitdiffcore.txt +++ b/Documentation/gitdiffcore.txt @@ -168,11 +168,11 @@ a similarity score different from the default of 50% by giving a number after the "-M" or "-C" option (e.g. "-M8" to tell it to use 8/10 = 80%). -Note. When the "-C" option is used with `\--find-copies-harder` +Note. When the "-C" option is used with `--find-copies-harder` option, 'git diff-{asterisk}' commands feed unmodified filepairs to diffcore mechanism as well as modified ones. This lets the copy detector consider unmodified files as copy source candidates at -the expense of making it slower. Without `\--find-copies-harder`, +the expense of making it slower. Without `--find-copies-harder`, 'git diff-{asterisk}' commands can detect copies only if the file that was copied happened to have been modified in the same changeset. @@ -224,7 +224,7 @@ diffcore-pickaxe: For Detecting Addition/Deletion of Specified String This transformation is used to find filepairs that represent changes that touch a specified string, and is controlled by the --S option and the `\--pickaxe-all` option to the 'git diff-{asterisk}' +-S option and the `--pickaxe-all` option to the 'git diff-*' commands. When diffcore-pickaxe is in use, it checks if there are @@ -233,9 +233,9 @@ different number of specified string. Such a filepair represents "the string appeared in this changeset". It also checks for the opposite case that loses the specified string. -When `\--pickaxe-all` is not in effect, diffcore-pickaxe leaves +When `--pickaxe-all` is not in effect, diffcore-pickaxe leaves only such filepairs that touch the specified string in its -output. When `\--pickaxe-all` is used, diffcore-pickaxe leaves all +output. When `--pickaxe-all` is used, diffcore-pickaxe leaves all filepairs intact if there is such a filepair, or makes the output empty otherwise. The latter behaviour is designed to make reviewing of the changes in the context of the whole diff --git a/Documentation/githooks.txt b/Documentation/githooks.txt index 28edefa202..b9003fed24 100644 --- a/Documentation/githooks.txt +++ b/Documentation/githooks.txt @@ -73,7 +73,7 @@ pre-commit ~~~~~~~~~~ This hook is invoked by 'git commit', and can be bypassed -with `\--no-verify` option. It takes no parameter, and is +with `--no-verify` option. It takes no parameter, and is invoked before obtaining the proposed commit log message and making a commit. Exiting with non-zero status from this script causes the 'git commit' to abort. @@ -99,12 +99,12 @@ given); `template` (if a `-t` option was given or the configuration option `commit.template` is set); `merge` (if the commit is a merge or a `.git/MERGE_MSG` file exists); `squash` (if a `.git/SQUASH_MSG` file exists); or `commit`, followed by -a commit SHA1 (if a `-c`, `-C` or `\--amend` option was given). +a commit SHA1 (if a `-c`, `-C` or `--amend` option was given). If the exit status is non-zero, 'git commit' will abort. The purpose of the hook is to edit the message file in place, and -it is not suppressed by the `\--no-verify` option. A non-zero exit +it is not suppressed by the `--no-verify` option. A non-zero exit means a failure of the hook and aborts the commit. It should not be used as replacement for pre-commit hook. @@ -115,7 +115,7 @@ commit-msg ~~~~~~~~~~ This hook is invoked by 'git commit', and can be bypassed -with `\--no-verify` option. It takes a single parameter, the +with `--no-verify` option. It takes a single parameter, the name of the file that holds the proposed commit log message. Exiting with non-zero status causes the 'git commit' to abort. diff --git a/Documentation/gitmodules.txt b/Documentation/gitmodules.txt index 4e1fd52e7d..4effd78902 100644 --- a/Documentation/gitmodules.txt +++ b/Documentation/gitmodules.txt @@ -41,8 +41,11 @@ submodule.<name>.update:: the commit specified in the superproject. If 'merge', the commit specified in the superproject will be merged into the current branch in the submodule. + If 'none', the submodule with name `$name` will not be updated + by default. + This config option is overridden if 'git submodule update' is given - the '--merge' or '--rebase' options. + the '--merge', '--rebase' or '--checkout' options. submodule.<name>.fetchRecurseSubmodules:: This option can be used to control recursive fetching of this diff --git a/Documentation/gitweb.conf.txt b/Documentation/gitweb.conf.txt index 7aba497b74..49474557d8 100644 --- a/Documentation/gitweb.conf.txt +++ b/Documentation/gitweb.conf.txt @@ -244,7 +244,7 @@ $highlight_bin:: By default set to 'highlight'; set it to full path to highlight executable if it is not installed on your web server's PATH. Note that 'highlight' feature must be set for gitweb to actually - use syntax hightlighting. + use syntax highlighting. + *NOTE*: if you want to add support for new file type (supported by "highlight" but not used by gitweb), you need to modify `%highlight_ext` @@ -499,6 +499,13 @@ $maxload:: Set `$maxload` to undefined value (`undef`) to turn this feature off. The default value is 300. +$omit_age_column:: + If true, omit the column with date of the most current commit on the + projects list page. It can save a bit of I/O and a fork per repository. + +$omit_owner:: + If true prevents displaying information about repository owner. + $per_request_config:: If this is set to code reference, it will be run once for each request. You can set parts of configuration that change per session this way. @@ -749,14 +756,14 @@ Project specific override is not supported. forks:: If this feature is enabled, gitweb considers projects in subdirectories of project root (basename) to be forks of existing - projects. For each project `$projname.git`, projects in the - `$projname/` directory and its subdirectories will not be - shown in the main projects list. Instead, a \'+' mark is shown - next to `$projname`, which links to a "forks" view that lists all - the forks (all projects in `$projname/` subdirectory). Additionally + projects. For each project +$projname.git+, projects in the + +$projname/+ directory and its subdirectories will not be + shown in the main projects list. Instead, a \'\+' mark is shown + next to +$projname+, which links to a "forks" view that lists all + the forks (all projects in +$projname/+ subdirectory). Additionally a "forks" view for a project is linked from project summary page. + -If the project list is taken from a file (`$projects_list` points to a +If the project list is taken from a file (+$projects_list+ points to a file), forks are only recognized if they are listed after the main project in that file. + diff --git a/Documentation/gitworkflows.txt b/Documentation/gitworkflows.txt index 5e4f362ff8..8b8c6ae5d3 100644 --- a/Documentation/gitworkflows.txt +++ b/Documentation/gitworkflows.txt @@ -39,8 +39,8 @@ To achieve this, try to split your work into small steps from the very beginning. It is always easier to squash a few commits together than to split one big commit into several. Don't be afraid of making too small or imperfect steps along the way. You can always go back later -and edit the commits with `git rebase \--interactive` before you -publish them. You can use `git stash save \--keep-index` to run the +and edit the commits with `git rebase --interactive` before you +publish them. You can use `git stash save --keep-index` to run the test suite independent of other uncommitted changes; see the EXAMPLES section of linkgit:git-stash[1]. diff --git a/Documentation/pretty-formats.txt b/Documentation/pretty-formats.txt index 880b6f2e6f..e3d8a83b23 100644 --- a/Documentation/pretty-formats.txt +++ b/Documentation/pretty-formats.txt @@ -130,8 +130,8 @@ The placeholders are: - '%b': body - '%B': raw body (unwrapped subject and body) - '%N': commit notes -- '%gD': reflog selector, e.g., `refs/stash@\{1\}` -- '%gd': shortened reflog selector, e.g., `stash@\{1\}` +- '%gD': reflog selector, e.g., `refs/stash@{1}` +- '%gd': shortened reflog selector, e.g., `stash@{1}` - '%gn': reflog identity name - '%gN': reflog identity name (respecting .mailmap, see linkgit:git-shortlog[1] or linkgit:git-blame[1]) - '%ge': reflog identity email @@ -155,7 +155,7 @@ insert an empty string unless we are traversing reflog entries (e.g., by `git log -g`). The `%d` placeholder will use the "short" decoration format if `--decorate` was not already provided on the command line. -If you add a `{plus}` (plus sign) after '%' of a placeholder, a line-feed +If you add a `+` (plus sign) after '%' of a placeholder, a line-feed is inserted immediately before the expansion if and only if the placeholder expands to a non-empty string. diff --git a/Documentation/pull-fetch-param.txt b/Documentation/pull-fetch-param.txt index 5dd6e5a0c7..94a9d32f1d 100644 --- a/Documentation/pull-fetch-param.txt +++ b/Documentation/pull-fetch-param.txt @@ -13,7 +13,7 @@ endif::git-pull[] <refspec>:: The format of a <refspec> parameter is an optional plus - `{plus}`, followed by the source ref <src>, followed + `+`, followed by the source ref <src>, followed by a colon `:`, followed by the destination ref <dst>. + The remote ref that matches <src> diff --git a/Documentation/rev-list-options.txt b/Documentation/rev-list-options.txt index 6a4b6355ba..1ae3c899ef 100644 --- a/Documentation/rev-list-options.txt +++ b/Documentation/rev-list-options.txt @@ -198,7 +198,7 @@ excluded from the output. + For example, `--cherry-pick --right-only A...B` omits those commits from `B` which are in `A` or are patch-equivalent to a commit in -`A`. In other words, this lists the `{plus}` commits from `git cherry A B`. +`A`. In other words, this lists the `+` commits from `git cherry A B`. More precisely, `--cherry-pick --right-only --no-merges` gives the exact list. @@ -455,7 +455,7 @@ The effect of this is best shown by way of comparing to `---------' ----------------------------------------------------------------------- + -Note the major differences in `N` and `P` over '\--full-history': +Note the major differences in `N` and `P` over '--full-history': + -- * `N`'s parent list had `I` removed, because it is an ancestor of the @@ -494,7 +494,7 @@ of course). When we want to find out what commits in `M` are contaminated with the bug introduced by `D` and need fixing, however, we might want to view only the subset of 'D..M' that are actually descendants of `D`, i.e. -excluding `C` and `K`. This is exactly what the '\--ancestry-path' +excluding `C` and `K`. This is exactly what the '--ancestry-path' option does. Applied to the 'D..M' range, it results in: + ----------------------------------------------------------------------- diff --git a/Documentation/technical/api-argv-array.txt b/Documentation/technical/api-argv-array.txt index 49b3d52952..1b7d8f140c 100644 --- a/Documentation/technical/api-argv-array.txt +++ b/Documentation/technical/api-argv-array.txt @@ -37,6 +37,11 @@ Functions `argv_array_push`:: Push a copy of a string onto the end of the array. +`argv_array_pushl`:: + Push a list of strings onto the end of the array. The arguments + should be a list of `const char *` strings, terminated by a NULL + argument. + `argv_array_pushf`:: Format a string and push it onto the end of the array. This is a convenience wrapper combining `strbuf_addf` and `argv_array_push`. diff --git a/Documentation/technical/api-credentials.txt b/Documentation/technical/api-credentials.txt index 21ca6a2553..adb6f0c896 100644 --- a/Documentation/technical/api-credentials.txt +++ b/Documentation/technical/api-credentials.txt @@ -6,8 +6,52 @@ password credentials from the user (even though credentials in the wider world can take many forms, in this document the word "credential" always refers to a username and password pair). +This document describes two interfaces: the C API that the credential +subsystem provides to the rest of git, and the protocol that git uses to +communicate with system-specific "credential helpers". If you are +writing git code that wants to look up or prompt for credentials, see +the section "C API" below. If you want to write your own helper, see +the section on "Credential Helpers" below. + +Typical setup +------------- + +------------ ++-----------------------+ +| git code (C) |--- to server requiring ---> +| | authentication +|.......................| +| C credential API |--- prompt ---> User ++-----------------------+ + ^ | + | pipe | + | v ++-----------------------+ +| git credential helper | ++-----------------------+ +------------ + +The git code (typically a remote-helper) will call the C API to obtain +credential data like a login/password pair (credential_fill). The +API will itself call a remote helper (e.g. "git credential-cache" or +"git credential-store") that may retrieve credential data from a +store. If the credential helper cannot find the information, the C API +will prompt the user. Then, the caller of the API takes care of +contacting the server, and does the actual authentication. + +C API +----- + +The credential C API is meant to be called by git code which needs to +acquire or store a credential. It is centered around an object +representing a single credential and provides three basic operations: +fill (acquire credentials by calling helpers and/or prompting the user), +approve (mark a credential as successfully used so that it can be stored +for later use), and reject (mark a credential as unsuccessful so that it +can be erased from any persistent storage). + Data Structures ---------------- +~~~~~~~~~~~~~~~ `struct credential`:: @@ -21,14 +65,17 @@ Data Structures The `helpers` member of the struct is a `string_list` of helpers. Each string specifies an external helper which will be run, in order, to either acquire or store credentials. See the section on credential -helpers below. +helpers below. This list is filled-in by the API functions +according to the corresponding configuration variables before +consulting helpers, so there usually is no need for a caller to +modify the helpers field at all. + This struct should always be initialized with `CREDENTIAL_INIT` or `credential_init`. Functions ---------- +~~~~~~~~~ `credential_init`:: @@ -72,7 +119,7 @@ Functions Parse a URL into broken-down credential fields. Example -------- +~~~~~~~ The example below shows how the functions of the credential API could be used to login to a fictitious "foo" service on a remote host: @@ -135,8 +182,10 @@ credentials from and to long-term storage (where "long-term" is simply longer than a single git process; e.g., credentials may be stored in-memory for a few minutes, or indefinitely on disk). -Each helper is specified by a single string. The string is transformed -by git into a command to be executed using these rules: +Each helper is specified by a single string in the configuration +variable `credential.helper` (and others, see linkgit:git-config[1]). +The string is transformed by git into a command to be executed using +these rules: 1. If the helper string begins with "!", it is considered a shell snippet, and everything after the "!" becomes the command. @@ -243,3 +292,10 @@ request. If a helper receives any other operation, it should silently ignore the request. This leaves room for future operations to be added (older helpers will just ignore the new requests). + +See also +-------- + +linkgit:gitcredentials[7] + +linkgit:git-config[5] (See configuration variables `credential.*`) diff --git a/Documentation/technical/api-parse-options.txt b/Documentation/technical/api-parse-options.txt index 2527b7e8d7..3062389404 100644 --- a/Documentation/technical/api-parse-options.txt +++ b/Documentation/technical/api-parse-options.txt @@ -21,7 +21,7 @@ that allow to change the behavior of a command. * There are basically two forms of options: 'Short options' consist of one dash (`-`) and one alphanumeric character. - 'Long options' begin with two dashes (`\--`) and some + 'Long options' begin with two dashes (`--`) and some alphanumeric characters. * Options are case-sensitive. @@ -31,7 +31,7 @@ The parse-options API allows: * 'sticked' and 'separate form' of options with arguments. `-oArg` is sticked, `-o Arg` is separate form. - `\--option=Arg` is sticked, `\--option Arg` is separate form. + `--option=Arg` is sticked, `--option Arg` is separate form. * Long options may be 'abbreviated', as long as the abbreviation is unambiguous. @@ -39,12 +39,12 @@ The parse-options API allows: * Short options may be bundled, e.g. `-a -b` can be specified as `-ab`. * Boolean long options can be 'negated' (or 'unset') by prepending - `no-`, e.g. `\--no-abbrev` instead of `\--abbrev`. Conversely, + `no-`, e.g. `--no-abbrev` instead of `--abbrev`. Conversely, options that begin with `no-` can be 'negated' by removing it. -* Options and non-option arguments can clearly be separated using the `\--` - option, e.g. `-a -b \--option \-- \--this-is-a-file` indicates that - `\--this-is-a-file` must not be processed as an option. +* Options and non-option arguments can clearly be separated using the `--` + option, e.g. `-a -b --option -- --this-is-a-file` indicates that + `--this-is-a-file` must not be processed as an option. Steps to parse options ---------------------- @@ -76,7 +76,7 @@ before the full parser, which in turn shows the full help message. Flags are the bitwise-or of: `PARSE_OPT_KEEP_DASHDASH`:: - Keep the `\--` that usually separates options from + Keep the `--` that usually separates options from non-option arguments. `PARSE_OPT_STOP_AT_NON_OPTION`:: @@ -114,22 +114,22 @@ say `static struct option builtin_add_options[]`. There are some macros to easily define options: `OPT__ABBREV(&int_var)`:: - Add `\--abbrev[=<n>]`. + Add `--abbrev[=<n>]`. `OPT__COLOR(&int_var, description)`:: - Add `\--color[=<when>]` and `--no-color`. + Add `--color[=<when>]` and `--no-color`. `OPT__DRY_RUN(&int_var, description)`:: - Add `-n, \--dry-run`. + Add `-n, --dry-run`. `OPT__FORCE(&int_var, description)`:: - Add `-f, \--force`. + Add `-f, --force`. `OPT__QUIET(&int_var, description)`:: - Add `-q, \--quiet`. + Add `-q, --quiet`. `OPT__VERBOSE(&int_var, description)`:: - Add `-v, \--verbose`. + Add `-v, --verbose`. `OPT_GROUP(description)`:: Start an option group. `description` is a short string that @@ -216,10 +216,10 @@ The last element of the array must be `OPT_END()`. If not stated otherwise, interpret the arguments as follows: * `short` is a character for the short option - (e.g. `{apostrophe}e{apostrophe}` for `-e`, use `0` to omit), + (e.g. `'e'` for `-e`, use `0` to omit), * `long` is a string for the long option - (e.g. `"example"` for `\--example`, use `NULL` to omit), + (e.g. `"example"` for `--example`, use `NULL` to omit), * `int_var` is an integer variable, @@ -243,10 +243,10 @@ The function must be defined in this form: The callback mechanism is as follows: * Inside `func`, the only interesting member of the structure - given by `opt` is the void pointer `opt\->value`. - `\*opt\->value` will be the value that is saved into `var`, if you + given by `opt` is the void pointer `opt->value`. + `*opt->value` will be the value that is saved into `var`, if you use `OPT_CALLBACK()`. - For example, do `*(unsigned long *)opt\->value = 42;` to get 42 + For example, do `*(unsigned long *)opt->value = 42;` to get 42 into an `unsigned long` variable. * Return value `0` indicates success and non-zero return diff --git a/Documentation/technical/api-revision-walking.txt b/Documentation/technical/api-revision-walking.txt index 996da0503a..b7d0d9a8a7 100644 --- a/Documentation/technical/api-revision-walking.txt +++ b/Documentation/technical/api-revision-walking.txt @@ -56,6 +56,11 @@ function. returning a `struct commit *` each time you call it. The end of the revision list is indicated by returning a NULL pointer. +`reset_revision_walk`:: + + Reset the flags used by the revision walking api. You can use + this to do multiple sequencial revision walks. + Data structures --------------- diff --git a/Documentation/technical/index-format.txt b/Documentation/technical/index-format.txt index 8930b3fabc..9d25b30178 100644 --- a/Documentation/technical/index-format.txt +++ b/Documentation/technical/index-format.txt @@ -113,9 +113,22 @@ GIT index format are encoded in 7-bit ASCII and the encoding cannot contain a NUL byte (iow, this is a UNIX pathname). + (Version 4) In version 4, the entry path name is prefix-compressed + relative to the path name for the previous entry (the very first + entry is encoded as if the path name for the previous entry is an + empty string). At the beginning of an entry, an integer N in the + variable width encoding (the same encoding as the offset is encoded + for OFS_DELTA pack entries; see pack-format.txt) is stored, followed + by a NUL-terminated string S. Removing N bytes from the end of the + path name for the previous entry, and replacing it with the string S + yields the path name for this entry. + 1-8 nul bytes as necessary to pad the entry to a multiple of eight bytes while keeping the name NUL-terminated. + (Version 4) In version 4, the padding after the pathname does not + exist. + == Extensions === Cached tree diff --git a/Documentation/technical/pack-protocol.txt b/Documentation/technical/pack-protocol.txt index 546980c0a4..49cdc571cd 100644 --- a/Documentation/technical/pack-protocol.txt +++ b/Documentation/technical/pack-protocol.txt @@ -351,7 +351,7 @@ Then the server will start sending its packfile data. A simple clone may look like this (with no 'have' lines): ---- - C: 0054want 74730d410fcb6603ace96f1dc55ea6196122532d\0multi_ack \ + C: 0054want 74730d410fcb6603ace96f1dc55ea6196122532d multi_ack \ side-band-64k ofs-delta\n C: 0032want 7d1665144a3a975c05f1f43902ddaf084e784dbe\n C: 0032want 5a3f6be755bbb7deae50065988cbfa1ffa9ab68a\n @@ -367,7 +367,7 @@ A simple clone may look like this (with no 'have' lines): An incremental update (fetch) response might look like this: ---- - C: 0054want 74730d410fcb6603ace96f1dc55ea6196122532d\0multi_ack \ + C: 0054want 74730d410fcb6603ace96f1dc55ea6196122532d multi_ack \ side-band-64k ofs-delta\n C: 0032want 7d1665144a3a975c05f1f43902ddaf084e784dbe\n C: 0032want 5a3f6be755bbb7deae50065988cbfa1ffa9ab68a\n diff --git a/Documentation/technical/protocol-common.txt b/Documentation/technical/protocol-common.txt index d30a1b9510..fb7ff084f8 100644 --- a/Documentation/technical/protocol-common.txt +++ b/Documentation/technical/protocol-common.txt @@ -36,7 +36,7 @@ More specifically, they: . They cannot have ASCII control characters (i.e. bytes whose values are lower than \040, or \177 `DEL`), space, tilde `~`, - caret `{caret}`, colon `:`, question-mark `?`, asterisk `*`, + caret `^`, colon `:`, question-mark `?`, asterisk `*`, or open bracket `[` anywhere. . They cannot end with a slash `/` nor a dot `.`. diff --git a/Documentation/user-manual.txt b/Documentation/user-manual.txt index 6c7fee7ef7..02ed5668e1 100644 --- a/Documentation/user-manual.txt +++ b/Documentation/user-manual.txt @@ -1600,7 +1600,7 @@ dangling tree b24c2473f1fd3d91352a624795be026d64c8841f You will see informational messages on dangling objects. They are objects that still exist in the repository but are no longer referenced by any of your branches, and can (and will) be removed after a while with "gc". -You can run `git fsck --no-dangling` to supress these messages, and still +You can run `git fsck --no-dangling` to suppress these messages, and still view real errors. [[recovering-lost-changes]] @@ -1611,7 +1611,7 @@ Recovering lost changes Reflogs ^^^^^^^ -Say you modify a branch with `linkgit:git-reset[1] --hard`, and then +Say you modify a branch with +linkgit:git-reset[1] \--hard+, and then realize that the branch was the only reference you had to that point in history. @@ -4207,7 +4207,7 @@ commits one by one with the function `get_revision()`. If you are interested in more details of the revision walking process, just have a look at the first implementation of `cmd_log()`; call -`git show v1.3.0{tilde}155^2{tilde}4` and scroll down to that function (note that you +`git show v1.3.0~155^2~4` and scroll down to that function (note that you no longer need to call `setup_pager()` directly). Nowadays, `git log` is a builtin, which means that it is _contained_ in the @@ -4270,9 +4270,9 @@ Two things are interesting here: negative numbers in case of different errors--and 0 on success. - the variable `sha1` in the function signature of `get_sha1()` is `unsigned - char {asterisk}`, but is actually expected to be a pointer to `unsigned + char *`, but is actually expected to be a pointer to `unsigned char[20]`. This variable will contain the 160-bit SHA-1 of the given - commit. Note that whenever a SHA-1 is passed as `unsigned char {asterisk}`, it + commit. Note that whenever a SHA-1 is passed as `unsigned char *`, it is the binary representation, as opposed to the ASCII representation in hex characters, which is passed as `char *`. |