diff options
Diffstat (limited to 'Documentation')
68 files changed, 2306 insertions, 391 deletions
diff --git a/Documentation/Makefile b/Documentation/Makefile index 06b0c57b95..cd5b4396db 100644 --- a/Documentation/Makefile +++ b/Documentation/Makefile @@ -103,6 +103,14 @@ ifdef DOCBOOK_SUPPRESS_SP XMLTO_EXTRA += -m manpage-suppress-sp.xsl endif +# If your target system uses GNU groff, it may try to render +# apostrophes as a "pretty" apostrophe using unicode. This breaks +# cut&paste, so you should set GNU_ROFF to force them to be ASCII +# apostrophes. Unfortunately does not work with non-GNU roff. +ifdef GNU_ROFF +XMLTO_EXTRA += -m manpage-quote-apos.xsl +endif + SHELL_PATH ?= $(SHELL) # Shell quote; SHELL_PATH_SQ = $(subst ','\'',$(SHELL_PATH)) diff --git a/Documentation/RelNotes-1.6.5.1.txt b/Documentation/RelNotes-1.6.5.1.txt new file mode 100644 index 0000000000..309ba181b2 --- /dev/null +++ b/Documentation/RelNotes-1.6.5.1.txt @@ -0,0 +1,20 @@ +GIT v1.6.5.1 Release Notes +========================== + +Fixes since v1.6.5 +------------------ + + * An corrupt pack could make codepath to read objects into an + infinite loop. + + * Download throughput display was always shown in KiB/s but on fast links + it is more appropriate to show it in MiB/s. + + * "git grep -f filename" used uninitialized variable and segfaulted. + + * "git clone -b branch" gave a wrong commit object name to post-checkout + hook. + + * "git pull" over http did not work on msys. + +Other minor documentation updates are included. diff --git a/Documentation/RelNotes-1.6.5.2.txt b/Documentation/RelNotes-1.6.5.2.txt new file mode 100644 index 0000000000..aa7ccce3a2 --- /dev/null +++ b/Documentation/RelNotes-1.6.5.2.txt @@ -0,0 +1,19 @@ +GIT v1.6.5.2 Release Notes +========================== + +Fixes since v1.6.5.1 +-------------------- + + * Installation of templates triggered a bug in busybox when using tar + implementation from it. + + * "git add -i" incorrectly ignored paths that are already in the index + if they matched .gitignore patterns. + + * "git describe --always" should have produced some output even there + were no tags in the repository, but it didn't. + + * "git ls-files" when showing tracked files incorrectly paid attention + to the exclude patterns. + +Other minor documentation updates are included. diff --git a/Documentation/RelNotes-1.6.5.3.txt b/Documentation/RelNotes-1.6.5.3.txt new file mode 100644 index 0000000000..b2fad1b22e --- /dev/null +++ b/Documentation/RelNotes-1.6.5.3.txt @@ -0,0 +1,63 @@ +Git v1.6.5.3 Release Notes +========================== + +Fixes since v1.6.5.2 +-------------------- + + * info/grafts file didn't ignore trailing CR at the end of lines. + + * Packages generated on newer FC were unreadable by older versions of + RPM as the new default is to use stronger hash. + + * output from "git blame" was unreadable when the file ended in an + incomplete line. + + * "git add -i/-p" didn't handle deletion of empty files correctly. + + * "git clone" takes up to two parameters, but did not complain when + given more arguments than necessary and silently ignored them. + + * "git cvsimport" did not read files given as command line arguments + correctly when it is run from a subdirectory. + + * "git diff --color-words -U0" didn't work correctly. + + * The handling of blank lines at the end of file by "git diff/apply + --whitespace" was inconsistent with the other kinds of errors. + They are now colored, warned against, and fixed the same way as others. + + * There was no way to allow blank lines at the end of file without + allowing extra blanks at the end of lines. You can use blank-at-eof + and blank-at-eol whitespace error class to specify them separately. + The old trailing-space error class is now a short-hand to set both. + + * "-p" option to "git format-patch" was supposed to suppress diffstat + generation, but it was broken since 1.6.1. + + * "git imap-send" did not compile cleanly with newer OpenSSL. + + * "git help -a" outside of a git repository was broken. + + * "git ls-files -i" was supposed to be inverse of "git ls-files" without -i + with respect to exclude patterns, but it was broken since 1.6.5.2. + + * "git ls-remote" outside of a git repository over http was broken. + + * "git rebase -i" gave bogus error message when the command word was + misspelled. + + * "git receive-pack" that is run in response to "git push" did not run + garbage collection nor update-server-info, but in larger hosting sites, + these almost always need to be run. To help site administrators, the + command now runs "gc --auto" and "u-s-i" by setting receive.autogc + and receive.updateserverinfo configuration variables, respectively. + + * Release notes spelled the package name with incorrect capitalization. + + * "gitweb" did not escape non-ascii characters correctly in the URL. + + * "gitweb" showed "patch" link even for merge commits. + + * "gitweb" showed incorrect links for blob line numbers in pathinfo mode. + +Other minor documentation updates are included. diff --git a/Documentation/RelNotes-1.6.6.txt b/Documentation/RelNotes-1.6.6.txt new file mode 100644 index 0000000000..6163b4aad3 --- /dev/null +++ b/Documentation/RelNotes-1.6.6.txt @@ -0,0 +1,196 @@ +Git v1.6.6 Release Notes +======================== + +Notes on behaviour change +------------------------- + + * In this release, "git fsck" defaults to "git fsck --full" and + checks packfiles, and because of this it will take much longer to + complete than before. If you prefer a quicker check only on loose + objects (the old default), you can say "git fsck --no-full". This + has been supported by 1.5.4 and newer versions of git, so it is + safe to write it in your script even if you use slightly older git + on some of your machines. + +Preparing yourselves for compatibility issues in 1.7.0 +------------------------------------------------------ + +In git 1.7.0, which is planned to be the release after 1.6.6, there will +be a handful of behaviour changes that will break backward compatibility. + +These changes were discussed long time ago and existing behaviours have +been identified as more problematic to the userbase than keeping them for +the sake of backward compatibility. + +When necessary, transition strategy for existing users has been designed +not to force them running around setting configuration variables and +updating their scripts in order to keep the traditional behaviour on the +day their sysadmin decides to install the new version of git. When we +switched from "git-foo" to "git foo" in 1.6.0, even though the change had +been advertised and the transition guide had been provided for a very long +time, the users procrastinated during the entire transtion period, and +ended up panicking on the day their sysadmins updated their git. + +For changes decided to be in 1.7.0, we have been much louder to strongly +discourage such procrastination. If you have been using recent versions +of git, you would have already seen warnings issued when you exercised +features whose behaviour will change, with the instruction on how to keep +the existing behaviour if you choose to. You hopefully should be well +prepared already. + +Of course, we have also given "this and that will change in 1.7.0; prepare +yourselves" warnings in the release notes and announcement messages. +Let's see how well users will fare this time. + + * "git push" into a branch that is currently checked out (i.e. pointed by + HEAD in a repository that is not bare) will be refused by default. + + Similarly, "git push $there :$killed" to delete the branch $killed + in a remote repository $there, when $killed branch is the current + branch pointed at by its HEAD, will be refused by default. + + Setting the configuration variables receive.denyCurrentBranch and + receive.denyDeleteCurrent to 'ignore' in the receiving repository + can be used to override these safety features. Versions of git + since 1.6.2 have issued a loud warning when you tried to do them + without setting the configuration, so repositories of people who + still need to be able to perform such a push should already been + future proofed. + + Please refer to: + + http://git.or.cz/gitwiki/GitFaq#non-bare + http://thread.gmane.org/gmane.comp.version-control.git/107758/focus=108007 + + for more details on the reason why this change is needed and the + transition process that already took place so far. + + * "git send-email" will not make deep threads by default when sending a + patch series with more than two messages. All messages will be sent as + a reply to the first message, i.e. cover letter. It has been possible + to configure send-email to do this by setting sendemail.chainreplyto + configuration variable to false. The only thing the new release will + do is to change the default when you haven't configured that variable. + + * "git status" will not be "git commit --dry-run". This change does not + affect you if you run the command without pathspec. + + Nobody sane found the current behaviour of "git status Makefile" useful + nor meaningful, and it confused users. "git commit --dry-run" has been + provided as a way to get the current behaviour of this command since + 1.6.5. + + * "git diff" traditionally treated various "ignore whitespace" options + only as a way to filter the patch output. "git diff --exit-code -b" + exited with non-zero status even if all changes were about changing the + ammount of whitespace and nothing else. and "git diff -b" showed the + "diff --git" header line for such a change without patch text. + + In 1.7.0, the "ignore whitespaces" will affect the semantics of the + diff operation itself. A change that does not affect anything but + whitespaces will be reported with zero exit status when run with + --exit-code, and there will not be "diff --git" header for such a + change. + + +Updates since v1.6.5 +-------------------- + +(subsystems) + + * various git-gui updates including new translations, wm states, etc. + + * git-svn updates. + + * "git fetch" over http learned a new mode that is different from the + traditional "dumb commit walker". + +(portability) + + * imap-send can be built on mingw port. + +(performance) + + * "git diff -B" has smaller memory footprint. + +(usability, bells and whistles) + + * The object replace mechanism can be bypassed with --no-replace-objects + global option given to the "git" program. + + * In configuration files, a few variables that name paths can begin with ~/ + and ~username/ and they are expanded as expected. + + * "git subcmd -h" now shows short usage help for many more subcommands. + + * "git bisect reset" can reset to an arbitrary commit. + + * "git checkout frotz" when there is no local branch "frotz" but there + is only one remote tracking branch "frotz" is taken as a request to + start the named branch at the corresponding remote tracking branch. + + * "git describe" can be told to add "-dirty" suffix with "--dirty" option. + + * "git diff" learned --submodule option to show a list of one-line logs + instead of differences between the commit object names. + + * "git fetch" learned --all and --multiple options, to run fetch from + many repositories, and --prune option to remove remote tracking + branches that went stale. These make "git remote update" and "git + remote prune" less necessary (there is no plan to remove "remote + update" nor "remote prune", though). + + * "git fsck" by default checks the packfiles (i.e. "--full" is the + default); you can turn it off with "git fsck --no-full". + + * "git grep" can use -F (fixed strings) and -i (ignore case) together. + + * import-tars contributed fast-import frontend learned more types of + compressed tarballs. + + * "git instaweb" knows how to talk with mod_cgid to apache2. + + * "git log --decorate" shows the location of HEAD as well. + + * "git log" and "git rev-list" learned to take revs and pathspecs from + the standard input with the new "--stdin" option. + + * "--pretty=format" option to "log" family of commands learned: + + . to wrap text with the "%w()" specifier. + . to show reflog information with "%g[sdD]" specifier. + + * "git notes" command to annotate existing commits. + + * "git merge" (and "git pull") learned --ff-only option to make it fail + if the merge does not result in a fast-forward. + + * "git mergetool" learned to use p4merge. + + * "git rebase -i" learned "reword" that acts like "edit" but immediately + starts an editor to tweak the log message without returning control to + the shell, which is done by "edit" to give an opportunity to tweak the + contents. + + * In "git submodule add <repository> <path>", <path> is now optional and + inferred from <repository> the same way "git clone <repository>" does. + + * "git svn" learned to read SVN 1.5+ and SVK merge tickets. + + * Author names shown in gitweb output are links to search commits by the + author. + + +(developers) + +Fixes since v1.6.5 +------------------ + +All of the fixes in v1.6.5.X maintenance series are included in this +release, unless otherwise noted. + +--- +exec >/var/tmp/1 +echo O=$(git describe master) +O=v1.6.6-rc0-62-g7fc9d15 +git shortlog --no-merges $O..master --not maint diff --git a/Documentation/config.txt b/Documentation/config.txt index cd1781498e..a8e0876a2a 100644 --- a/Documentation/config.txt +++ b/Documentation/config.txt @@ -126,12 +126,20 @@ advice.*:: Directions on how to stage/unstage/add shown in the output of linkgit:git-status[1] and the template shown when writing commit messages. Default: true. + commitBeforeMerge:: + Advice shown when linkgit:git-merge[1] refuses to + merge to avoid overwritting local changes. + Default: true. -- core.fileMode:: If false, the executable bit differences between the index and the working copy are ignored; useful on broken filesystems like FAT. - See linkgit:git-update-index[1]. True by default. + See linkgit:git-update-index[1]. ++ +The default is true, except linkgit:git-clone[1] or linkgit:git-init[1] +will probe and set core.fileMode false if appropriate when the +repository is created. core.ignoreCygwinFSTricks:: This option is only used by Cygwin implementation of Git. If false, @@ -144,6 +152,18 @@ core.ignoreCygwinFSTricks:: is true, in which case ignoreCygwinFSTricks is ignored as Cygwin's POSIX emulation is required to support core.filemode. +core.ignorecase:: + If true, this option enables various workarounds to enable + git to work better on filesystems that are not case sensitive, + like FAT. For example, if a directory listing finds + "makefile" when git expects "Makefile", git will assume + it is really the same file, and continue to remember it as + "Makefile". ++ +The default is false, except linkgit:git-clone[1] or linkgit:git-init[1] +will probe and set core.ignorecase true if appropriate when the repository +is created. + core.trustctime:: If false, the ctime differences between the index and the working copy are ignored; useful when the inode change time @@ -169,9 +189,10 @@ core.autocrlf:: writing to the filesystem. The variable can be set to 'input', in which case the conversion happens only while reading from the filesystem but files are written out with - `LF` at the end of lines. Currently, which paths to consider - "text" (i.e. be subjected to the autocrlf mechanism) is - decided purely based on the contents. + `LF` at the end of lines. A file is considered + "text" (i.e. be subjected to the autocrlf mechanism) based on + the file's `crlf` attribute, or if `crlf` is unspecified, + based on the file's contents. See linkgit:gitattributes[5]. core.safecrlf:: If true, makes git check if converting `CRLF` as controlled by @@ -223,7 +244,11 @@ core.symlinks:: contain the link text. linkgit:git-update-index[1] and linkgit:git-add[1] will not change the recorded type to regular file. Useful on filesystems like FAT that do not support - symbolic links. True by default. + symbolic links. ++ +The default is true, except linkgit:git-clone[1] or linkgit:git-init[1] +will probe and set core.symlinks false if appropriate when the repository +is created. core.gitProxy:: A "proxy command" to execute (as 'command host port') instead @@ -380,16 +405,15 @@ Common unit suffixes of 'k', 'm', or 'g' are supported. core.excludesfile:: In addition to '.gitignore' (per-directory) and '.git/info/exclude', git looks into this file for patterns - of files which are not meant to be tracked. See - linkgit:gitignore[5]. + of files which are not meant to be tracked. "{tilde}/" is expanded + to the value of `$HOME` and "{tilde}user/" to the specified user's + home directory. See linkgit:gitignore[5]. core.editor:: Commands such as `commit` and `tag` that lets you edit messages by launching an editor uses the value of this variable when it is set, and the environment variable - `GIT_EDITOR` is not set. The order of preference is - `GIT_EDITOR` environment, `core.editor`, `VISUAL` and - `EDITOR` environment variables and then finally `vi`. + `GIT_EDITOR` is not set. See linkgit:git-var[1]. core.pager:: The command that git will use to paginate output. Can @@ -416,13 +440,17 @@ core.whitespace:: consider them as errors. You can prefix `-` to disable any of them (e.g. `-trailing-space`): + -* `trailing-space` treats trailing whitespaces at the end of the line +* `blank-at-eol` treats trailing whitespaces at the end of the line as an error (enabled by default). * `space-before-tab` treats a space character that appears immediately before a tab character in the initial indent part of the line as an error (enabled by default). * `indent-with-non-tab` treats a line that is indented with 8 or more space characters as an error (not enabled by default). +* `blank-at-eof` treats blank lines added at the end of file as an error + (enabled by default). +* `trailing-space` is a short-hand to cover both `blank-at-eol` and + `blank-at-eof`. * `cr-at-eol` treats a carriage-return at the end of line as part of the line terminator, i.e. with it, `trailing-space` does not trigger if the character before such a carriage-return @@ -454,6 +482,19 @@ On some file system/operating system combinations, this is unreliable. Set this config setting to 'rename' there; However, This will remove the check that makes sure that existing object files will not get overwritten. +core.notesRef:: + When showing commit messages, also show notes which are stored in + the given ref. This ref is expected to contain files named + after the full SHA-1 of the commit they annotate. ++ +If such a file exists in the given ref, the referenced blob is read, and +appended to the commit message, separated by a "Notes:" line. If the +given ref itself does not exist, it is not an error, but means that no +notes should be printed. ++ +This setting defaults to "refs/notes/commits", and can be overridden by +the `GIT_NOTES_REF` environment variable. + add.ignore-errors:: Tells 'git-add' to continue adding files when some files cannot be added due to indexing errors. Equivalent to the '--ignore-errors' @@ -666,6 +707,8 @@ color.ui:: commit.template:: Specify a file to use as the template for new commit messages. + "{tilde}/" is expanded to the value of `$HOME` and "{tilde}user/" to the + specified user's home directory. diff.autorefreshindex:: When using 'git-diff' to compare with work tree @@ -1089,6 +1132,14 @@ http.maxRequests:: How many HTTP requests to launch in parallel. Can be overridden by the 'GIT_HTTP_MAX_REQUESTS' environment variable. Default is 5. +http.postBuffer:: + Maximum size in bytes of the buffer used by smart HTTP + transports when POSTing data to the remote system. + For requests larger than this buffer size, HTTP/1.1 and + Transfer-Encoding: chunked is used to avoid creating a + massive pack file locally. Default is 1 MiB, which is + sufficient for most requests. + http.lowSpeedLimit, http.lowSpeedTime:: If the HTTP transfer speed is less than 'http.lowSpeedLimit' for longer than 'http.lowSpeedTime' seconds, the transfer is aborted. @@ -1320,6 +1371,11 @@ rebase.stat:: Whether to show a diffstat of what changed upstream since the last rebase. False by default. +receive.autogc:: + By default, git-receive-pack will run "git-gc --auto" after + receiving data from git-push and updating refs. You can stop + it by setting this variable to false. + receive.fsckObjects:: If it is set to true, git-receive-pack will check all received objects. It will abort in the case of a malformed object or a @@ -1351,10 +1407,14 @@ receive.denyCurrentBranch:: receive.denyNonFastForwards:: If set to true, git-receive-pack will deny a ref update which is - not a fast forward. Use this to prevent such an update via a push, + not a fast-forward. Use this to prevent such an update via a push, even if that push is forced. This configuration variable is set when initializing a shared repository. +receive.updateserverinfo:: + If set to true, git-receive-pack will run git-update-server-info + after receiving data from git-push and updating refs. + remote.<name>.url:: The URL of a remote repository. See linkgit:git-fetch[1] or linkgit:git-push[1]. @@ -1381,7 +1441,13 @@ remote.<name>.mirror:: remote.<name>.skipDefaultUpdate:: If true, this remote will be skipped by default when updating - using the update subcommand of linkgit:git-remote[1]. + using linkgit:git-fetch[1] or the `update` subcommand of + linkgit:git-remote[1]. + +remote.<name>.skipFetchAll:: + If true, this remote will be skipped by default when updating + using linkgit:git-fetch[1] or the `update` subcommand of + linkgit:git-remote[1]. remote.<name>.receivepack:: The default program to execute on the remote side when pushing. See diff --git a/Documentation/diff-options.txt b/Documentation/diff-options.txt index 9276faeb11..8707d0e740 100644 --- a/Documentation/diff-options.txt +++ b/Documentation/diff-options.txt @@ -14,7 +14,8 @@ endif::git-format-patch[] ifdef::git-format-patch[] -p:: - Generate patches without diffstat. +--no-stat:: + Generate plain patches without any diffstats. endif::git-format-patch[] ifndef::git-format-patch[] @@ -27,33 +28,40 @@ endif::git-format-patch[] -U<n>:: --unified=<n>:: Generate diffs with <n> lines of context instead of - the usual three. Implies "-p". + the usual three. +ifndef::git-format-patch[] + Implies `-p`. +endif::git-format-patch[] +ifndef::git-format-patch[] --raw:: Generate the raw format. {git-diff-core? This is the default.} +endif::git-format-patch[] +ifndef::git-format-patch[] --patch-with-raw:: - Synonym for "-p --raw". + Synonym for `-p --raw`. +endif::git-format-patch[] --patience:: Generate a diff using the "patience diff" algorithm. --stat[=width[,name-width]]:: Generate a diffstat. You can override the default - output width for 80-column terminal by "--stat=width". + output width for 80-column terminal by `--stat=width`. The width of the filename part can be controlled by giving another width to it separated by a comma. --numstat:: - Similar to \--stat, but shows number of added and + Similar to `\--stat`, but shows number of added and deleted lines in decimal notation and pathname without abbreviation, to make it more machine friendly. For binary files, outputs two `-` instead of saying `0 0`. --shortstat:: - Output only the last line of the --stat format containing total + Output only the last line of the `--stat` format containing total number of modified files, as well as number of added and deleted lines. @@ -61,24 +69,39 @@ endif::git-format-patch[] Output the distribution of relative amount of changes (number of lines added or removed) for each sub-directory. Directories with changes below a cut-off percent (3% by default) are not shown. The cut-off percent - can be set with "--dirstat=limit". Changes in a child directory is not - counted for the parent directory, unless "--cumulative" is used. + can be set with `--dirstat=limit`. Changes in a child directory is not + counted for the parent directory, unless `--cumulative` is used. --dirstat-by-file[=limit]:: - Same as --dirstat, but counts changed files instead of lines. + Same as `--dirstat`, but counts changed files instead of lines. --summary:: Output a condensed summary of extended header information such as creations, renames and mode changes. +ifndef::git-format-patch[] --patch-with-stat:: - Synonym for "-p --stat". - {git-format-patch? This is the default.} + Synonym for `-p --stat`. +endif::git-format-patch[] + +ifndef::git-format-patch[] -z:: - NUL-line termination on output. This affects the --raw - output field terminator. Also output from commands such - as "git-log" will be delimited with NUL between commits. +ifdef::git-log[] + Separate the commits with NULs instead of with new newlines. ++ +Also, when `--raw` or `--numstat` has been given, do not munge +pathnames and use NULs as output field terminators. +endif::git-log[] +ifndef::git-log[] + When `--raw` or `--numstat` has been given, do not munge + pathnames and use NULs as output field terminators. +endif::git-log[] ++ +Without this option, each pathname output will have TAB, LF, double quotes, +and backslash characters replaced with `\t`, `\n`, `\"`, and `\\`, +respectively, and the pathname will be enclosed in double quotes if +any of those replacements occurred. --name-only:: Show only names of changed files. @@ -87,6 +110,13 @@ endif::git-format-patch[] Show only names and status of changed files. See the description of the `--diff-filter` option on what the status letters mean. +--submodule[=<format>]:: + Chose the output format for submodule differences. <format> can be one of + 'short' and 'log'. 'short' just shows pairs of commit names, this format + is used when this option is not given. 'log' is the default value for this + option and lists the commits in that commit range like the 'summary' + option of linkgit:git-submodule[1] does. + --color:: Show colored diff. @@ -110,16 +140,19 @@ The regex can also be set via a diff driver or configuration option, see linkgit:gitattributes[1] or linkgit:git-config[1]. Giving it explicitly overrides any diff driver or configuration setting. Diff drivers override configuration settings. +endif::git-format-patch[] --no-renames:: Turn off rename detection, even when the configuration file gives the default to do so. +ifndef::git-format-patch[] --check:: Warn if changes introduce trailing whitespace or an indent that uses a space before a tab. Exits with non-zero status if problems are found. Not compatible with --exit-code. +endif::git-format-patch[] --full-index:: Instead of the first handful of characters, show the full @@ -127,16 +160,16 @@ override configuration settings. line when generating patch format output. --binary:: - In addition to --full-index, output "binary diff" that - can be applied with "git apply". + In addition to `--full-index`, output a binary diff that + can be applied with `git-apply`. --abbrev[=<n>]:: Instead of showing the full 40-byte hexadecimal object name in diff-raw format output and diff-tree header lines, show only a partial prefix. This is - independent of --full-index option above, which controls + independent of the `--full-index` option above, which controls the diff-patch output format. Non default number of - digits can be specified with --abbrev=<n>. + digits can be specified with `--abbrev=<n>`. -B:: Break complete rewrite changes into pairs of delete and create. @@ -147,6 +180,7 @@ override configuration settings. -C:: Detect copies as well as renames. See also `--find-copies-harder`. +ifndef::git-format-patch[] --diff-filter=[ACDMRTUXB*]:: Select only files that are Added (`A`), Copied (`C`), Deleted (`D`), Modified (`M`), Renamed (`R`), have their @@ -158,6 +192,7 @@ override configuration settings. paths are selected if there is any file that matches other criteria in the comparison; if there is no file that matches other criteria, nothing is selected. +endif::git-format-patch[] --find-copies-harder:: For performance reasons, by default, `-C` option finds copies only @@ -169,12 +204,13 @@ override configuration settings. `-C` option has the same effect. -l<num>:: - -M and -C options require O(n^2) processing time where n + The `-M` and `-C` options require O(n^2) processing time where n is the number of potential rename/copy targets. This option prevents rename/copy detection from running if the number of rename/copy targets exceeds the specified number. +ifndef::git-format-patch[] -S<string>:: Look for differences that introduce or remove an instance of <string>. Note that this is different than the string simply @@ -182,18 +218,20 @@ override configuration settings. linkgit:gitdiffcore[7] for more details. --pickaxe-all:: - When -S finds a change, show all the changes in that + When `-S` finds a change, show all the changes in that changeset, not just the files that contain the change in <string>. --pickaxe-regex:: Make the <string> not a plain string but an extended POSIX regex to match. +endif::git-format-patch[] -O<orderfile>:: Output the patch in the order specified in the <orderfile>, which has one shell glob pattern per line. +ifndef::git-format-patch[] -R:: Swap two inputs; that is, show differences from index or on-disk file to tree contents. @@ -205,6 +243,7 @@ override configuration settings. not in a subdirectory (e.g. in a bare repository), you can name which subdirectory to make the output relative to by giving a <path> as an argument. +endif::git-format-patch[] -a:: --text:: @@ -229,13 +268,15 @@ override configuration settings. Show the context between diff hunks, up to the specified number of lines, thereby fusing hunks that are close to each other. +ifndef::git-format-patch[] --exit-code:: Make the program exit with codes similar to diff(1). That is, it exits with 1 if there were differences and 0 means no differences. --quiet:: - Disable all output of the program. Implies --exit-code. + Disable all output of the program. Implies `--exit-code`. +endif::git-format-patch[] --ext-diff:: Allow an external diff helper to be executed. If you set an diff --git a/Documentation/fetch-options.txt b/Documentation/fetch-options.txt index 5eb2b0ee07..ab6419fe6e 100644 --- a/Documentation/fetch-options.txt +++ b/Documentation/fetch-options.txt @@ -1,13 +1,5 @@ -ifndef::git-pull[] --q:: ---quiet:: - Pass --quiet to git-fetch-pack and silence any other internally - used git commands. - --v:: ---verbose:: - Be verbose. -endif::git-pull[] +--all:: + Fetch all remotes. -a:: --append:: @@ -15,11 +7,15 @@ endif::git-pull[] existing contents of `.git/FETCH_HEAD`. Without this option old data in `.git/FETCH_HEAD` will be overwritten. ---upload-pack <upload-pack>:: - When given, and the repository to fetch from is handled - by 'git-fetch-pack', '--exec=<upload-pack>' is passed to - the command to specify non-default path for the command - run on the other end. +--depth=<depth>:: + Deepen the history of a 'shallow' repository created by + `git clone` with `--depth=<depth>` option (see linkgit:git-clone[1]) + by the specified number of commits. + +ifndef::git-pull[] +--dry-run:: + Show what would be done, without making any changes. +endif::git-pull[] -f:: --force:: @@ -29,6 +25,20 @@ endif::git-pull[] fetches is a descendant of `<lbranch>`. This option overrides that check. +-k:: +--keep:: + Keep downloaded pack. + +ifndef::git-pull[] +--multiple:: + Allow several <repository> and <group> arguments to be + specified. No <refspec>s may be specified. + +--prune:: + After fetching, remove any remote tracking branches which + no longer exist on the remote. +endif::git-pull[] + ifdef::git-pull[] --no-tags:: endif::git-pull[] @@ -49,10 +59,6 @@ endif::git-pull[] flag lets all tags and their associated objects be downloaded. --k:: ---keep:: - Keep downloaded pack. - -u:: --update-head-ok:: By default 'git-fetch' refuses to update the head which @@ -62,7 +68,19 @@ endif::git-pull[] implementing your own Porcelain you are not supposed to use it. ---depth=<depth>:: - Deepen the history of a 'shallow' repository created by - `git clone` with `--depth=<depth>` option (see linkgit:git-clone[1]) - by the specified number of commits. +--upload-pack <upload-pack>:: + When given, and the repository to fetch from is handled + by 'git-fetch-pack', '--exec=<upload-pack>' is passed to + the command to specify non-default path for the command + run on the other end. + +ifndef::git-pull[] +-q:: +--quiet:: + Pass --quiet to git-fetch-pack and silence any other internally + used git commands. + +-v:: +--verbose:: + Be verbose. +endif::git-pull[] diff --git a/Documentation/git-add.txt b/Documentation/git-add.txt index 45ebf87ca3..e93e606f45 100644 --- a/Documentation/git-add.txt +++ b/Documentation/git-add.txt @@ -76,10 +76,10 @@ OPTIONS work tree and add them to the index. This gives the user a chance to review the difference before adding modified contents to the index. - - This effectively runs ``add --interactive``, but bypasses the - initial command menu and directly jumps to `patch` subcommand. - See ``Interactive mode'' for details. ++ +This effectively runs `add --interactive`, but bypasses the +initial command menu and directly jumps to the `patch` subcommand. +See ``Interactive mode'' for details. -e, \--edit:: Open the diff vs. the index in an editor and let the user diff --git a/Documentation/git-apply.txt b/Documentation/git-apply.txt index 5ee8c91f2d..c2528a7654 100644 --- a/Documentation/git-apply.txt +++ b/Documentation/git-apply.txt @@ -3,7 +3,7 @@ git-apply(1) NAME ---- -git-apply - Apply a patch on a git index file and/or a working tree +git-apply - Apply a patch to files and/or to the index SYNOPSIS @@ -20,8 +20,11 @@ SYNOPSIS DESCRIPTION ----------- -Reads supplied 'diff' output and applies it on a git index file -and a work tree. +Reads the supplied diff output (i.e. "a patch") and applies it to files. +With the `--index` option the patch is also applied to the index, and +with the `--cache` option the patch is only applied to the index. +Without these options, the command applies the patch only to files, +and does not require them to be in a git repository. OPTIONS ------- @@ -34,7 +37,7 @@ OPTIONS input. Turns off "apply". --numstat:: - Similar to \--stat, but shows the number of added and + Similar to `--stat`, but shows the number of added and deleted lines in decimal notation and the pathname without abbreviation, to make it more machine friendly. For binary files, outputs two `-` instead of saying @@ -48,22 +51,22 @@ OPTIONS --check:: Instead of applying the patch, see if the patch is - applicable to the current work tree and/or the index + applicable to the current working tree and/or the index file and detects errors. Turns off "apply". --index:: - When --check is in effect, or when applying the patch + When `--check` is in effect, or when applying the patch (which is the default when none of the options that disables it is in effect), make sure the patch is applicable to what the current index file records. If - the file to be patched in the work tree is not + the file to be patched in the working tree is not up-to-date, it is flagged as an error. This flag also causes the index file to be updated. --cached:: Apply a patch without touching the working tree. Instead take the cached data, apply the patch, and store the result in the index - without using the working tree. This implies '--index'. + without using the working tree. This implies `--index`. --build-fake-ancestor=<file>:: Newer 'git-diff' output has embedded 'index information' @@ -87,11 +90,13 @@ the information is read from the current index instead. rejected hunks in corresponding *.rej files. -z:: - When showing the index information, do not munge paths, - but use NUL terminated machine readable format. Without - this flag, the pathnames output will have TAB, LF, and - backslash characters replaced with `\t`, `\n`, and `\\`, - respectively. + When `--numstat` has been given, do not munge pathnames, + but use a NUL-terminated machine-readable format. ++ +Without this option, each pathname output will have TAB, LF, double quotes, +and backslash characters replaced with `\t`, `\n`, `\"`, and `\\`, +respectively, and the pathname will be enclosed in double quotes if +any of those replacements occurred. -p<n>:: Remove <n> leading slashes from traditional diff paths. The @@ -107,8 +112,8 @@ the information is read from the current index instead. By default, 'git-apply' expects that the patch being applied is a unified diff with at least one line of context. This provides good safety measures, but breaks down when - applying a diff generated with --unified=0. To bypass these - checks use '--unidiff-zero'. + applying a diff generated with `--unified=0`. To bypass these + checks use `--unidiff-zero`. + Note, for the reasons stated above usage of context-free patches is discouraged. @@ -144,7 +149,7 @@ discouraged. be useful when importing patchsets, where you want to include certain files or directories. + -When --exclude and --include patterns are used, they are examined in the +When `--exclude` and `--include` patterns are used, they are examined in the order they appear on the command line, and the first match determines if a patch to each path is used. A patch to a path that does not match any include/exclude pattern is used by default if there is no include pattern @@ -227,13 +232,13 @@ Submodules If the patch contains any changes to submodules then 'git-apply' treats these changes as follows. -If --index is specified (explicitly or implicitly), then the submodule +If `--index` is specified (explicitly or implicitly), then the submodule commits must match the index exactly for the patch to apply. If any of the submodules are checked-out, then these check-outs are completely ignored, i.e., they are not required to be up-to-date or clean and they are not updated. -If --index is not specified, then the submodule commits in the patch +If `--index` is not specified, then the submodule commits in the patch are ignored and only the absence or presence of the corresponding subdirectory is checked and (if possible) updated. diff --git a/Documentation/git-bisect.txt b/Documentation/git-bisect.txt index 63e7a42cb3..d2ffae0c10 100644 --- a/Documentation/git-bisect.txt +++ b/Documentation/git-bisect.txt @@ -20,7 +20,7 @@ on the subcommand: git bisect bad [<rev>] git bisect good [<rev>...] git bisect skip [(<rev>|<range>)...] - git bisect reset [<branch>] + git bisect reset [<commit>] git bisect visualize git bisect replay <logfile> git bisect log @@ -81,16 +81,27 @@ will have been left with the first bad kernel revision in "refs/bisect/bad". Bisect reset ~~~~~~~~~~~~ -To return to the original head after a bisect session, issue the -following command: +After a bisect session, to clean up the bisection state and return to +the original HEAD, issue the following command: ------------------------------------------------ $ git bisect reset ------------------------------------------------ -This resets the tree to the original branch instead of being on the -bisection commit ("git bisect start" will also do that, as it resets -the bisection state). +By default, this will return your tree to the commit that was checked +out before `git bisect start`. (A new `git bisect start` will also do +that, as it cleans up the old bisection state.) + +With an optional argument, you can return to a different commit +instead: + +------------------------------------------------ +$ git bisect reset <commit> +------------------------------------------------ + +For example, `git bisect reset HEAD` will leave you on the current +bisection commit and avoid switching commits at all, while `git bisect +reset bisect/bad` will check out the first bad revision. Bisect visualize ~~~~~~~~~~~~~~~~ diff --git a/Documentation/git-check-ref-format.txt b/Documentation/git-check-ref-format.txt index 0b7982ea76..0aeef24780 100644 --- a/Documentation/git-check-ref-format.txt +++ b/Documentation/git-check-ref-format.txt @@ -9,7 +9,8 @@ SYNOPSIS -------- [verse] 'git check-ref-format' <refname> -'git check-ref-format' [--branch] <branchname-shorthand> +'git check-ref-format' --print <refname> +'git check-ref-format' --branch <branchname-shorthand> DESCRIPTION ----------- @@ -63,16 +64,31 @@ reference name expressions (see linkgit:git-rev-parse[1]): . at-open-brace `@{` is used as a notation to access a reflog entry. -With the `--branch` option, it expands a branch name shorthand and -prints the name of the branch the shorthand refers to. +With the `--print` option, if 'refname' is acceptable, it prints the +canonicalized name of a hypothetical reference with that name. That is, +it prints 'refname' with any extra `/` characters removed. -EXAMPLE -------- +With the `--branch` option, it expands the ``previous branch syntax'' +`@{-n}`. For example, `@{-1}` is a way to refer the last branch you +were on. This option should be used by porcelains to accept this +syntax anywhere a branch name is expected, so they can act as if you +typed the branch name. -git check-ref-format --branch @{-1}:: - -Print the name of the previous branch. +EXAMPLES +-------- +* Print the name of the previous branch: ++ +------------ +$ git check-ref-format --branch @{-1} +------------ + +* Determine the reference name to use for a new branch: ++ +------------ +$ ref=$(git check-ref-format --print "refs/heads/$newbranch") || +die "we do not like '$newbranch' as a branch name." +------------ GIT --- diff --git a/Documentation/git-clone.txt b/Documentation/git-clone.txt index 5ebcba1c7c..7e7d9fcf50 100644 --- a/Documentation/git-clone.txt +++ b/Documentation/git-clone.txt @@ -39,7 +39,7 @@ OPTIONS --local:: -l:: When the repository to clone from is on a local machine, - this flag bypasses normal "git aware" transport + this flag bypasses the normal "git aware" transport mechanism and clones the repository by making a copy of HEAD and everything under objects and refs directories. The files under `.git/objects/` directory are hardlinked @@ -60,7 +60,7 @@ OPTIONS -s:: When the repository to clone is on the local machine, instead of using hard links, automatically setup - .git/objects/info/alternates to share the objects + `.git/objects/info/alternates` to share the objects with the source repository. The resulting repository starts out without any object of its own. + @@ -69,7 +69,7 @@ it unless you understand what it does. If you clone your repository using this option and then delete branches (or use any other git command that makes any existing commit unreferenced) in the source repository, some objects may become unreferenced (or dangling). -These objects may be removed by normal git operations (such as 'git-commit') +These objects may be removed by normal git operations (such as `git commit`) which automatically call `git gc --auto`. (See linkgit:git-gc[1].) If these objects are removed and were referenced by the cloned repository, then the cloned repository will become corrupt. @@ -86,13 +86,13 @@ objects from the source repository into a pack in the cloned repository. --reference <repository>:: If the reference repository is on the local machine, - automatically setup .git/objects/info/alternates to + automatically setup `.git/objects/info/alternates` to obtain objects from the reference repository. Using an already existing repository as an alternate will require fewer objects to be copied from the repository being cloned, reducing network and local storage costs. + -*NOTE*: see NOTE to --shared option. +*NOTE*: see the NOTE for the `--shared` option. --quiet:: -q:: @@ -101,7 +101,7 @@ objects from the source repository into a pack in the cloned repository. --verbose:: -v:: - Display the progressbar, even in case the standard output is not + Display the progress bar, even in case the standard output is not a terminal. --no-checkout:: @@ -121,17 +121,17 @@ objects from the source repository into a pack in the cloned repository. configuration variables are created. --mirror:: - Set up a mirror of the remote repository. This implies --bare. + Set up a mirror of the remote repository. This implies `--bare`. --origin <name>:: -o <name>:: - Instead of using the remote name 'origin' to keep track - of the upstream repository, use <name>. + Instead of using the remote name `origin` to keep track + of the upstream repository, use `<name>`. --branch <name>:: -b <name>:: Instead of pointing the newly created HEAD to the branch pointed - to by the cloned repository's HEAD, point to <name> branch + to by the cloned repository's HEAD, point to `<name>` branch instead. In a non-bare repository, this is the branch that will be checked out. @@ -158,7 +158,7 @@ objects from the source repository into a pack in the cloned repository. --recursive:: After the clone is created, initialize all submodules within, using their default settings. This is equivalent to running - 'git submodule update --init --recursive' immediately after + `git submodule update --init --recursive` immediately after the clone is finished. This option is ignored if the cloned repository does not have a worktree/checkout (i.e. if any of `--no-checkout`/`-n`, `--bare`, or `--mirror` is given) @@ -171,8 +171,8 @@ objects from the source repository into a pack in the cloned repository. <directory>:: The name of a new directory to clone into. The "humanish" part of the source repository is used if no directory is - explicitly given ("repo" for "/path/to/repo.git" and "foo" - for "host.xz:foo/.git"). Cloning into an existing directory + explicitly given (`repo` for `/path/to/repo.git` and `foo` + for `host.xz:foo/.git`). Cloning into an existing directory is only allowed if the directory is empty. :git-clone: 1 diff --git a/Documentation/git-commit.txt b/Documentation/git-commit.txt index 0578a40d84..3ea80c820f 100644 --- a/Documentation/git-commit.txt +++ b/Documentation/git-commit.txt @@ -323,7 +323,7 @@ ENVIRONMENT AND CONFIGURATION VARIABLES The editor used to edit the commit log message will be chosen from the GIT_EDITOR environment variable, the core.editor configuration variable, the VISUAL environment variable, or the EDITOR environment variable (in that -order). +order). See linkgit:git-var[1] for details. HOOKS ----- diff --git a/Documentation/git-cvsserver.txt b/Documentation/git-cvsserver.txt index 785779e221..99a7c14700 100644 --- a/Documentation/git-cvsserver.txt +++ b/Documentation/git-cvsserver.txt @@ -182,10 +182,9 @@ Database Backend ---------------- 'git-cvsserver' uses one database per git head (i.e. CVS module) to -store information about the repository for faster access. The -database doesn't contain any persistent data and can be completely -regenerated from the git repository at any time. The database -needs to be updated (i.e. written to) after every commit. +store information about the repository to maintain consistent +CVS revision numbers. The database needs to be +updated (i.e. written to) after every commit. If the commit is done directly by using `git` (as opposed to using 'git-cvsserver') the update will need to happen on the @@ -204,6 +203,18 @@ write so it might not be enough to grant the users using 'git-cvsserver' write access to the database file without granting them write access to the directory, too. +The database can not be reliably regenerated in a +consistent form after the branch it is tracking has changed. +Example: For merged branches, 'git-cvsserver' only tracks +one branch of development, and after a 'git-merge' an +incrementally updated database may track a different branch +than a database regenerated from scratch, causing inconsistent +CVS revision numbers. `git-cvsserver` has no way of knowing which +branch it would have picked if it had been run incrementally +pre-merge. So if you have to fully or partially (from old +backup) regenerate the database, you should be suspicious +of pre-existing CVS sandboxes. + You can configure the database backend with the following configuration variables: diff --git a/Documentation/git-describe.txt b/Documentation/git-describe.txt index b231dbb947..78b9808aa3 100644 --- a/Documentation/git-describe.txt +++ b/Documentation/git-describe.txt @@ -8,7 +8,9 @@ git-describe - Show the most recent tag that is reachable from a commit SYNOPSIS -------- +[verse] 'git describe' [--all] [--tags] [--contains] [--abbrev=<n>] <committish>... +'git describe' [--all] [--tags] [--contains] [--abbrev=<n>] --dirty[=<mark>] DESCRIPTION ----------- @@ -27,6 +29,11 @@ OPTIONS <committish>...:: Committish object names to describe. +--dirty[=<mark>]:: + Describe the working tree. + It means describe HEAD and appends <mark> (`-dirty` by + default) if the working tree is dirty. + --all:: Instead of using only the annotated tags, use any ref found in `.git/refs/`. This option enables matching @@ -44,7 +51,9 @@ OPTIONS --abbrev=<n>:: Instead of using the default 7 hexadecimal digits as the - abbreviated object name, use <n> digits. + abbreviated object name, use <n> digits, or as many digits + as needed to form a unique object name. An <n> of 0 + will suppress long format, only showing the closest tag. --candidates=<n>:: Instead of considering only the 10 most recent tags as @@ -68,8 +77,8 @@ OPTIONS This is useful when you want to see parts of the commit object name in "describe" output, even when the commit in question happens to be a tagged version. Instead of just emitting the tag name, it will - describe such a commit as v1.2-0-deadbeef (0th commit since tag v1.2 - that points at object deadbeef....). + describe such a commit as v1.2-0-gdeadbee (0th commit since tag v1.2 + that points at object deadbee....). --match <pattern>:: Only consider tags matching the given pattern (can be used to avoid @@ -108,7 +117,7 @@ the output shows the reference path as well: [torvalds@g5 git]$ git describe --all --abbrev=4 v1.0.5^2 tags/v1.0.0-21-g975b - [torvalds@g5 git]$ git describe --all HEAD^ + [torvalds@g5 git]$ git describe --all --abbrev=4 HEAD^ heads/lt/describe-7-g975b With --abbrev set to 0, the command can be used to find the @@ -117,6 +126,13 @@ closest tagname without any suffix: [torvalds@g5 git]$ git describe --abbrev=0 v1.0.5^2 tags/v1.0.0 +Note that the suffix you get if you type these commands today may be +longer than what Linus saw above when he ran these commands, as your +git repository may have new commits whose object names begin with +975b that did not exist back then, and "-g975b" suffix alone may not +be sufficient to disambiguate these commits. + + SEARCH STRATEGY --------------- diff --git a/Documentation/git-difftool.txt b/Documentation/git-difftool.txt index 96a6c51a4b..8e9aed67d7 100644 --- a/Documentation/git-difftool.txt +++ b/Documentation/git-difftool.txt @@ -31,7 +31,7 @@ OPTIONS Use the diff tool specified by <tool>. Valid merge tools are: kdiff3, kompare, tkdiff, meld, xxdiff, emerge, vimdiff, gvimdiff, - ecmerge, diffuse, opendiff and araxis. + ecmerge, diffuse, opendiff, p4merge and araxis. + If a diff tool is not specified, 'git-difftool' will use the configuration variable `diff.tool`. If the diff --git a/Documentation/git-fast-import.txt b/Documentation/git-fast-import.txt index c2f483a8d2..288032c7b8 100644 --- a/Documentation/git-fast-import.txt +++ b/Documentation/git-fast-import.txt @@ -316,7 +316,7 @@ change to the project. data ('from' SP <committish> LF)? ('merge' SP <committish> LF)? - (filemodify | filedelete | filecopy | filerename | filedeleteall)* + (filemodify | filedelete | filecopy | filerename | filedeleteall | notemodify)* LF? .... @@ -339,14 +339,13 @@ commit message use a 0 length data. Commit messages are free-form and are not interpreted by Git. Currently they must be encoded in UTF-8, as fast-import does not permit other encodings to be specified. -Zero or more `filemodify`, `filedelete`, `filecopy`, `filerename` -and `filedeleteall` commands +Zero or more `filemodify`, `filedelete`, `filecopy`, `filerename`, +`filedeleteall` and `notemodify` commands may be included to update the contents of the branch prior to creating the commit. These commands may be supplied in any order. However it is recommended that a `filedeleteall` command precede -all `filemodify`, `filecopy` and `filerename` commands in the same -commit, as `filedeleteall` -wipes the branch clean (see below). +all `filemodify`, `filecopy`, `filerename` and `notemodify` commands in +the same commit, as `filedeleteall` wipes the branch clean (see below). The `LF` after the command is optional (it used to be required). @@ -595,6 +594,40 @@ more memory per active branch (less than 1 MiB for even most large projects); so frontends that can easily obtain only the affected paths for a commit are encouraged to do so. +`notemodify` +^^^^^^^^^^^^ +Included in a `commit` command to add a new note (annotating a given +commit) or change the content of an existing note. This command has +two different means of specifying the content of the note. + +External data format:: + The data content for the note was already supplied by a prior + `blob` command. The frontend just needs to connect it to the + commit that is to be annotated. ++ +.... + 'N' SP <dataref> SP <committish> LF +.... ++ +Here `<dataref>` can be either a mark reference (`:<idnum>`) +set by a prior `blob` command, or a full 40-byte SHA-1 of an +existing Git blob object. + +Inline data format:: + The data content for the note has not been supplied yet. + The frontend wants to supply it as part of this modify + command. ++ +.... + 'N' SP 'inline' SP <committish> LF + data +.... ++ +See below for a detailed description of the `data` command. + +In both formats `<committish>` is any of the commit specification +expressions also accepted by `from` (see above). + `mark` ~~~~~~ Arranges for fast-import to save a reference to the current object, allowing diff --git a/Documentation/git-fetch.txt b/Documentation/git-fetch.txt index d3164c5c88..9b9e5686e4 100644 --- a/Documentation/git-fetch.txt +++ b/Documentation/git-fetch.txt @@ -10,11 +10,17 @@ SYNOPSIS -------- 'git fetch' <options> <repository> <refspec>... +'git fetch' <options> <group> + +'git fetch' --multiple <options> [<repository> | <group>]... + +'git fetch' --all <options> + DESCRIPTION ----------- -Fetches named heads or tags from another repository, along with -the objects necessary to complete them. +Fetches named heads or tags from one or more other repositories, +along with the objects necessary to complete them. The ref names and their object names of fetched refs are stored in `.git/FETCH_HEAD`. This information is left for a later merge @@ -28,6 +34,10 @@ pointed by remote tags that it does not yet have, then fetch those missing tags. If the other end has tags that point at branches you are not interested in, you will not get them. +'git fetch' can fetch from either a single named repository, or +or from several repositories at once if <group> is given and +there is a remotes.<group> entry in the configuration file. +(See linkgit:git-config[1]). OPTIONS ------- @@ -37,6 +47,35 @@ include::pull-fetch-param.txt[] include::urls-remotes.txt[] + +EXAMPLES +-------- + +* Update the remote-tracking branches: ++ +------------------------------------------------ +$ git fetch origin +------------------------------------------------ ++ +The above command copies all branches from the remote refs/heads/ +namespace and stores them to the local refs/remotes/origin/ namespace, +unless the branch.<name>.fetch option is used to specify a non-default +refspec. + +* Using refspecs explicitly: ++ +------------------------------------------------ +$ git fetch origin +pu:pu maint:tmp +------------------------------------------------ ++ +This updates (or creates, as necessary) branches `pu` and `tmp` in +the local repository by fetching from the branches (respectively) +`pu` and `maint` from the remote repository. ++ +The `pu` branch will be updated even if it is does not fast-forward, +because it is prefixed with a plus sign; `tmp` will not be. + + SEE ALSO -------- linkgit:git-pull[1] diff --git a/Documentation/git-filter-branch.txt b/Documentation/git-filter-branch.txt index 2b40babb6b..394a77a35f 100644 --- a/Documentation/git-filter-branch.txt +++ b/Documentation/git-filter-branch.txt @@ -159,7 +159,18 @@ to other tags will be rewritten to point to the underlying commit. --subdirectory-filter <directory>:: Only look at the history which touches the given subdirectory. The result will contain that directory (and only that) as its - project root. + project root. Implies --remap-to-ancestor. + +--remap-to-ancestor:: + Rewrite refs to the nearest rewritten ancestor instead of + ignoring them. ++ +Normally, positive refs on the command line are only changed if the +commit they point to was rewritten. However, you can limit the extent +of this rewriting by using linkgit:rev-list[1] arguments, e.g., path +limiters. Refs pointing to such excluded commits would then normally +be ignored. With this option, they are instead rewritten to point at +the nearest ancestor that was not excluded. --prune-empty:: Some kind of filters will generate empty commits, that left the tree diff --git a/Documentation/git-format-patch.txt b/Documentation/git-format-patch.txt index 687e667598..f1fd0df08a 100644 --- a/Documentation/git-format-patch.txt +++ b/Documentation/git-format-patch.txt @@ -43,28 +43,28 @@ There are two ways to specify which commits to operate on. The first rule takes precedence in the case of a single <commit>. To apply the second rule, i.e., format everything since the beginning of -history up until <commit>, use the '\--root' option: "git format-patch -\--root <commit>". If you want to format only <commit> itself, you -can do this with "git format-patch -1 <commit>". +history up until <commit>, use the '\--root' option: `git format-patch +\--root <commit>`. If you want to format only <commit> itself, you +can do this with `git format-patch -1 <commit>`. By default, each output file is numbered sequentially from 1, and uses the first line of the commit message (massaged for pathname safety) as -the filename. With the --numbered-files option, the output file names +the filename. With the `--numbered-files` option, the output file names will only be numbers, without the first line of the commit appended. The names of the output files are printed to standard -output, unless the --stdout option is specified. +output, unless the `--stdout` option is specified. -If -o is specified, output files are created in <dir>. Otherwise +If `-o` is specified, output files are created in <dir>. Otherwise they are created in the current working directory. By default, the subject of a single patch is "[PATCH] First Line" and the subject when multiple patches are output is "[PATCH n/m] First -Line". To force 1/1 to be added for a single patch, use -n. To omit -patch numbers from the subject, use -N +Line". To force 1/1 to be added for a single patch, use `-n`. To omit +patch numbers from the subject, use `-N`. -If given --thread, 'git-format-patch' will generate In-Reply-To and -References headers to make the second and subsequent patch mails appear -as replies to the first mail; this also generates a Message-Id header to +If given `--thread`, `git-format-patch` will generate `In-Reply-To` and +`References` headers to make the second and subsequent patch mails appear +as replies to the first mail; this also generates a `Message-Id` header to reference. OPTIONS @@ -112,7 +112,7 @@ include::diff-options.txt[] --attach[=<boundary>]:: Create multipart/mixed attachment, the first part of which is the commit message and the patch itself in the - second part, with "Content-Disposition: attachment". + second part, with `Content-Disposition: attachment`. --no-attach:: Disable the creation of an attachment, overriding the @@ -121,13 +121,13 @@ include::diff-options.txt[] --inline[=<boundary>]:: Create multipart/mixed attachment, the first part of which is the commit message and the patch itself in the - second part, with "Content-Disposition: inline". + second part, with `Content-Disposition: inline`. --thread[=<style>]:: --no-thread:: - Controls addition of In-Reply-To and References headers to + Controls addition of `In-Reply-To` and `References` headers to make the second and subsequent mails appear as replies to the - first. Also controls generation of the Message-Id header to + first. Also controls generation of the `Message-Id` header to reference. + The optional <style> argument can be either `shallow` or `deep`. @@ -136,16 +136,16 @@ series, where the head is chosen from the cover letter, the `\--in-reply-to`, and the first patch mail, in this order. 'deep' threading makes every mail a reply to the previous one. + -The default is --no-thread, unless the 'format.thread' configuration -is set. If --thread is specified without a style, it defaults to the +The default is `--no-thread`, unless the 'format.thread' configuration +is set. If `--thread` is specified without a style, it defaults to the style specified by 'format.thread' if any, or else `shallow`. + Beware that the default for 'git send-email' is to thread emails -itself. If you want 'git format-patch' to take care of hreading, you -will want to ensure that threading is disabled for 'git send-email'. +itself. If you want `git format-patch` to take care of threading, you +will want to ensure that threading is disabled for `git send-email`. --in-reply-to=Message-Id:: - Make the first mail (or all the mails with --no-thread) appear as a + Make the first mail (or all the mails with `--no-thread`) appear as a reply to the given Message-Id, which avoids breaking threads to provide a new patch series. @@ -160,16 +160,16 @@ will want to ensure that threading is disabled for 'git send-email'. Instead of the standard '[PATCH]' prefix in the subject line, instead use '[<Subject-Prefix>]'. This allows for useful naming of a patch series, and can be - combined with the --numbered option. + combined with the `--numbered` option. --cc=<email>:: - Add a "Cc:" header to the email headers. This is in addition + Add a `Cc:` header to the email headers. This is in addition to any configured headers, and may be used multiple times. --add-header=<header>:: Add an arbitrary header to the email headers. This is in addition to any configured headers, and may be used multiple times. - For example, --add-header="Organization: git-foo" + For example, `--add-header="Organization: git-foo"` --cover-letter:: In addition to the patches, generate a cover letter file diff --git a/Documentation/git-fsck.txt b/Documentation/git-fsck.txt index 287c4fc5e0..6fe9484da3 100644 --- a/Documentation/git-fsck.txt +++ b/Documentation/git-fsck.txt @@ -10,7 +10,7 @@ SYNOPSIS -------- [verse] 'git fsck' [--tags] [--root] [--unreachable] [--cache] [--no-reflogs] - [--full] [--strict] [--verbose] [--lost-found] [<object>*] + [--[no-]full] [--strict] [--verbose] [--lost-found] [<object>*] DESCRIPTION ----------- @@ -52,7 +52,8 @@ index file, all SHA1 references in .git/refs/*, and all reflogs (unless or $GIT_DIR/objects/info/alternates, and in packed git archives found in $GIT_DIR/objects/pack and corresponding pack subdirectories in alternate - object pools. + object pools. This is now default; you can turn it off + with --no-full. --strict:: Enable more strict checking, namely to catch a file mode diff --git a/Documentation/git-gc.txt b/Documentation/git-gc.txt index 1f6df6ad6b..4cd9cdf905 100644 --- a/Documentation/git-gc.txt +++ b/Documentation/git-gc.txt @@ -120,7 +120,7 @@ Notes particular, it will keep not only objects referenced by your current set of branches and tags, but also objects referenced by the index, remote tracking branches, refs saved by 'git-filter-branch' in -refs/original/, or reflogs (which may references commits in branches +refs/original/, or reflogs (which may reference commits in branches that were later amended or rewound). If you are expecting some objects to be collected and they aren't, check diff --git a/Documentation/git-http-backend.txt b/Documentation/git-http-backend.txt new file mode 100644 index 0000000000..67aec067c8 --- /dev/null +++ b/Documentation/git-http-backend.txt @@ -0,0 +1,178 @@ +git-http-backend(1) +=================== + +NAME +---- +git-http-backend - Server side implementation of Git over HTTP + +SYNOPSIS +-------- +[verse] +'git-http-backend' + +DESCRIPTION +----------- +A simple CGI program to serve the contents of a Git repository to Git +clients accessing the repository over http:// and https:// protocols. +The program supports clients fetching using both the smart HTTP protcol +and the backwards-compatible dumb HTTP protocol, as well as clients +pushing using the smart HTTP protocol. + +By default, only the `upload-pack` service is enabled, which serves +'git-fetch-pack' and 'git-ls-remote' clients, which are invoked from +'git-fetch', 'git-pull', and 'git-clone'. If the client is authenticated, +the `receive-pack` service is enabled, which serves 'git-send-pack' +clients, which is invoked from 'git-push'. + +SERVICES +-------- +These services can be enabled/disabled using the per-repository +configuration file: + +http.getanyfile:: + This serves older Git clients which are unable to use the + upload pack service. When enabled, clients are able to read + any file within the repository, including objects that are + no longer reachable from a branch but are still present. + It is enabled by default, but a repository can disable it + by setting this configuration item to `false`. + +http.uploadpack:: + This serves 'git-fetch-pack' and 'git-ls-remote' clients. + It is enabled by default, but a repository can disable it + by setting this configuration item to `false`. + +http.receivepack:: + This serves 'git-send-pack' clients, allowing push. It is + disabled by default for anonymous users, and enabled by + default for users authenticated by the web server. It can be + disabled by setting this item to `false`, or enabled for all + users, including anonymous users, by setting it to `true`. + +URL TRANSLATION +--------------- +To determine the location of the repository on disk, 'git-http-backend' +concatenates the environment variables PATH_INFO, which is set +automatically by the web server, and GIT_PROJECT_ROOT, which must be set +manually in the web server configuration. If GIT_PROJECT_ROOT is not +set, 'git-http-backend' reads PATH_TRANSLATED, which is also set +automatically by the web server. + +EXAMPLES +-------- +All of the following examples map 'http://$hostname/git/foo/bar.git' +to '/var/www/git/foo/bar.git'. + +Apache 2.x:: + Ensure mod_cgi, mod_alias, and mod_env are enabled, set + GIT_PROJECT_ROOT (or DocumentRoot) appropriately, and + create a ScriptAlias to the CGI: ++ +---------------------------------------------------------------- +SetEnv GIT_PROJECT_ROOT /var/www/git +ScriptAlias /git/ /usr/libexec/git-core/git-http-backend/ +---------------------------------------------------------------- ++ +To enable anonymous read access but authenticated write access, +require authorization with a LocationMatch directive: ++ +---------------------------------------------------------------- +<LocationMatch "^/git/.*/git-receive-pack$"> + AuthType Basic + AuthName "Git Access" + Require group committers + ... +</LocationMatch> +---------------------------------------------------------------- ++ +To require authentication for both reads and writes, use a Location +directive around the repository, or one of its parent directories: ++ +---------------------------------------------------------------- +<Location /git/private> + AuthType Basic + AuthName "Private Git Access" + Require group committers + ... +</Location> +---------------------------------------------------------------- ++ +To serve gitweb at the same url, use a ScriptAliasMatch to only +those URLs that 'git-http-backend' can handle, and forward the +rest to gitweb: ++ +---------------------------------------------------------------- +ScriptAliasMatch \ + "(?x)^/git/(.*/(HEAD | \ + info/refs | \ + objects/(info/[^/]+ | \ + [0-9a-f]{2}/[0-9a-f]{38} | \ + pack/pack-[0-9a-f]{40}\.(pack|idx)) | \ + git-(upload|receive)-pack))$" \ + /usr/libexec/git-core/git-http-backend/$1 + +ScriptAlias /git/ /var/www/cgi-bin/gitweb.cgi/ +---------------------------------------------------------------- + +Accelerated static Apache 2.x:: + Similar to the above, but Apache can be used to return static + files that are stored on disk. On many systems this may + be more efficient as Apache can ask the kernel to copy the + file contents from the file system directly to the network: ++ +---------------------------------------------------------------- +SetEnv GIT_PROJECT_ROOT /var/www/git + +AliasMatch ^/git/(.*/objects/[0-9a-f]{2}/[0-9a-f]{38})$ /var/www/git/$1 +AliasMatch ^/git/(.*/objects/pack/pack-[0-9a-f]{40}.(pack|idx))$ /var/www/git/$1 +ScriptAlias /git/ /usr/libexec/git-core/git-http-backend/ +---------------------------------------------------------------- ++ +This can be combined with the gitweb configuration: ++ +---------------------------------------------------------------- +SetEnv GIT_PROJECT_ROOT /var/www/git + +AliasMatch ^/git/(.*/objects/[0-9a-f]{2}/[0-9a-f]{38})$ /var/www/git/$1 +AliasMatch ^/git/(.*/objects/pack/pack-[0-9a-f]{40}.(pack|idx))$ /var/www/git/$1 +ScriptAliasMatch \ + "(?x)^/git/(.*/(HEAD | \ + info/refs | \ + objects/info/[^/]+ | \ + git-(upload|receive)-pack))$" \ + /usr/libexec/git-core/git-http-backend/$1 +ScriptAlias /git/ /var/www/cgi-bin/gitweb.cgi/ +---------------------------------------------------------------- + + +ENVIRONMENT +----------- +'git-http-backend' relies upon the CGI environment variables set +by the invoking web server, including: + +* PATH_INFO (if GIT_PROJECT_ROOT is set, otherwise PATH_TRANSLATED) +* REMOTE_USER +* REMOTE_ADDR +* CONTENT_TYPE +* QUERY_STRING +* REQUEST_METHOD + +The backend process sets GIT_COMMITTER_NAME to '$REMOTE_USER' and +GIT_COMMITTER_EMAIL to '$\{REMOTE_USER}@http.$\{REMOTE_ADDR\}', +ensuring that any reflogs created by 'git-receive-pack' contain some +identifying information of the remote user who performed the push. + +All CGI environment variables are available to each of the hooks +invoked by the 'git-receive-pack'. + +Author +------ +Written by Shawn O. Pearce <spearce@spearce.org>. + +Documentation +-------------- +Documentation by Shawn O. Pearce <spearce@spearce.org>. + +GIT +--- +Part of the linkgit:git[1] suite diff --git a/Documentation/git-http-push.txt b/Documentation/git-http-push.txt index aef383e0b1..ddf7a18dc4 100644 --- a/Documentation/git-http-push.txt +++ b/Documentation/git-http-push.txt @@ -82,11 +82,11 @@ destination side. Without '--force', the <src> ref is stored at the remote only if <dst> does not exist, or <dst> is a proper subset (i.e. an -ancestor) of <src>. This check, known as "fast forward check", +ancestor) of <src>. This check, known as "fast-forward check", is performed in order to avoid accidentally overwriting the remote ref and lose other peoples' commits from there. -With '--force', the fast forward check is disabled for all refs. +With '--force', the fast-forward check is disabled for all refs. Optionally, a <ref> parameter can be prefixed with a plus '+' sign to disable the fast-forward check only on that ref. diff --git a/Documentation/git-ls-files.txt b/Documentation/git-ls-files.txt index 021066e95d..625723e41f 100644 --- a/Documentation/git-ls-files.txt +++ b/Documentation/git-ls-files.txt @@ -48,8 +48,10 @@ OPTIONS -i:: --ignored:: - Show ignored files in the output. - Note that this also reverses any exclude list present. + Show only ignored files in the output. When showing files in the + index, print only those matched by an exclude pattern. When + showing "other" files, show only those matched by an exclude + pattern. -s:: --stage:: diff --git a/Documentation/git-merge.txt b/Documentation/git-merge.txt index d05f324462..e886c2ef54 100644 --- a/Documentation/git-merge.txt +++ b/Documentation/git-merge.txt @@ -212,6 +212,39 @@ You can work through the conflict with a number of tools: common ancestor, 'git show :2:filename' shows the HEAD version and 'git show :3:filename' shows the remote version. + +EXAMPLES +-------- + +* Merge branches `fixes` and `enhancements` on top of + the current branch, making an octopus merge: ++ +------------------------------------------------ +$ git merge fixes enhancements +------------------------------------------------ + +* Merge branch `obsolete` into the current branch, using `ours` + merge strategy: ++ +------------------------------------------------ +$ git merge -s ours obsolete +------------------------------------------------ + +* Merge branch `maint` into the current branch, but do not make + a new commit automatically: ++ +------------------------------------------------ +$ git merge --no-commit maint +------------------------------------------------ ++ +This can be used when you want to include further changes to the +merge, or want to write your own merge commit message. ++ +You should refrain from abusing this option to sneak substantial +changes into a merge commit. Small fixups like bumping +release/version name would be acceptable. + + SEE ALSO -------- linkgit:git-fmt-merge-msg[1], linkgit:git-pull[1], diff --git a/Documentation/git-mergetool.txt b/Documentation/git-mergetool.txt index 68ed6c0956..4a6f7f3a2d 100644 --- a/Documentation/git-mergetool.txt +++ b/Documentation/git-mergetool.txt @@ -27,7 +27,7 @@ OPTIONS Use the merge resolution program specified by <tool>. Valid merge tools are: kdiff3, tkdiff, meld, xxdiff, emerge, vimdiff, gvimdiff, ecmerge, - diffuse, tortoisemerge, opendiff and araxis. + diffuse, tortoisemerge, opendiff, p4merge and araxis. + If a merge resolution program is not specified, 'git-mergetool' will use the configuration variable `merge.tool`. If the diff --git a/Documentation/git-notes.txt b/Documentation/git-notes.txt new file mode 100644 index 0000000000..94cceb1319 --- /dev/null +++ b/Documentation/git-notes.txt @@ -0,0 +1,60 @@ +git-notes(1) +============ + +NAME +---- +git-notes - Add/inspect commit notes + +SYNOPSIS +-------- +[verse] +'git-notes' (edit [-F <file> | -m <msg>] | show) [commit] + +DESCRIPTION +----------- +This command allows you to add notes to commit messages, without +changing the commit. To discern these notes from the message stored +in the commit object, the notes are indented like the message, after +an unindented line saying "Notes:". + +To disable commit notes, you have to set the config variable +core.notesRef to the empty string. Alternatively, you can set it +to a different ref, something like "refs/notes/bugzilla". This setting +can be overridden by the environment variable "GIT_NOTES_REF". + + +SUBCOMMANDS +----------- + +edit:: + Edit the notes for a given commit (defaults to HEAD). + +show:: + Show the notes for a given commit (defaults to HEAD). + + +OPTIONS +------- +-m <msg>:: + Use the given note message (instead of prompting). + If multiple `-m` (or `-F`) options are given, their + values are concatenated as separate paragraphs. + +-F <file>:: + Take the note message from the given file. Use '-' to + read the note message from the standard input. + If multiple `-F` (or `-m`) options are given, their + values are concatenated as separate paragraphs. + + +Author +------ +Written by Johannes Schindelin <johannes.schindelin@gmx.de> + +Documentation +------------- +Documentation by Johannes Schindelin + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-pack-objects.txt b/Documentation/git-pack-objects.txt index 2e4992970e..f54d433d36 100644 --- a/Documentation/git-pack-objects.txt +++ b/Documentation/git-pack-objects.txt @@ -9,8 +9,9 @@ git-pack-objects - Create a packed archive of objects SYNOPSIS -------- [verse] -'git pack-objects' [-q] [--no-reuse-delta] [--delta-base-offset] [--non-empty] - [--local] [--incremental] [--window=N] [--depth=N] [--all-progress] +'git pack-objects' [-q | --progress | --all-progress] [--all-progress-implied] + [--no-reuse-delta] [--delta-base-offset] [--non-empty] + [--local] [--incremental] [--window=N] [--depth=N] [--revs [--unpacked | --all]*] [--stdout | base-name] [--keep-true-parents] < object-list @@ -137,7 +138,7 @@ base-name:: --all-progress:: When --stdout is specified then progress report is - displayed during the object count and deltification phases + displayed during the object count and compression phases but inhibited during the write-out phase. The reason is that in some cases the output stream is directly linked to another command which may wish to display progress @@ -146,6 +147,11 @@ base-name:: report for the write-out phase as well even if --stdout is used. +--all-progress-implied:: + This is used to imply --all-progress whenever progress display + is activated. Unlike --all-progress this flag doesn't actually + force any progress display by itself. + -q:: This flag makes the command not to report its progress on the standard error stream. diff --git a/Documentation/git-pull.txt b/Documentation/git-pull.txt index 7578623edb..b93201158f 100644 --- a/Documentation/git-pull.txt +++ b/Documentation/git-pull.txt @@ -26,6 +26,10 @@ Also note that options meant for 'git-pull' itself and underlying OPTIONS ------- + +Options related to merging +~~~~~~~~~~~~~~~~~~~~~~~~~~ + include::merge-options.txt[] :git-pull: 1 @@ -47,6 +51,9 @@ unless you have read linkgit:git-rebase[1] carefully. --no-rebase:: Override earlier --rebase. +Options related to fetching +~~~~~~~~~~~~~~~~~~~~~~~~~~~ + include::fetch-options.txt[] include::pull-fetch-param.txt[] @@ -131,54 +138,13 @@ $ git pull origin next ------------------------------------------------ + This leaves a copy of `next` temporarily in FETCH_HEAD, but -does not update any remote-tracking branches. - -* Bundle local branch `fixes` and `enhancements` on top of - the current branch, making an Octopus merge: -+ ------------------------------------------------- -$ git pull . fixes enhancements ------------------------------------------------- -+ -This `git pull .` syntax is equivalent to `git merge`. - -* Merge local branch `obsolete` into the current branch, using `ours` - merge strategy: -+ ------------------------------------------------- -$ git pull -s ours . obsolete ------------------------------------------------- - -* Merge local branch `maint` into the current branch, but do not make - a commit automatically: +does not update any remote-tracking branches. Using remote-tracking +branches, the same can be done by invoking fetch and merge: + ------------------------------------------------ -$ git pull --no-commit . maint +$ git fetch origin +$ git merge origin/next ------------------------------------------------ -+ -This can be used when you want to include further changes to the -merge, or want to write your own merge commit message. -+ -You should refrain from abusing this option to sneak substantial -changes into a merge commit. Small fixups like bumping -release/version name would be acceptable. - -* Command line pull of multiple branches from one repository: -+ ------------------------------------------------- -$ git checkout master -$ git fetch origin +pu:pu maint:tmp -$ git pull . tmp ------------------------------------------------- -+ -This updates (or creates, as necessary) branches `pu` and `tmp` in -the local repository by fetching from the branches (respectively) -`pu` and `maint` from the remote repository. -+ -The `pu` branch will be updated even if it is does not fast-forward; -the others will not be. -+ -The final command then merges the newly fetched `tmp` into master. If you tried a pull which resulted in a complex conflicts and diff --git a/Documentation/git-push.txt b/Documentation/git-push.txt index ba6a8a2fb2..52c0538df5 100644 --- a/Documentation/git-push.txt +++ b/Documentation/git-push.txt @@ -50,9 +50,9 @@ updated. + The object referenced by <src> is used to update the <dst> reference on the remote side, but by default this is only allowed if the -update can fast forward <dst>. By having the optional leading `{plus}`, +update can fast-forward <dst>. By having the optional leading `{plus}`, you can tell git to update the <dst> ref even when the update is not a -fast forward. This does *not* attempt to merge <src> into <dst>. See +fast-forward. This does *not* attempt to merge <src> into <dst>. See EXAMPLES below for details. + `tag <tag>` means the same as `refs/tags/<tag>:refs/tags/<tag>`. @@ -60,7 +60,7 @@ EXAMPLES below for details. Pushing an empty <src> allows you to delete the <dst> ref from the remote repository. + -The special refspec `:` (or `{plus}:` to allow non-fast forward updates) +The special refspec `:` (or `{plus}:` to allow non-fast-forward updates) directs git to push "matching" branches: for every branch that exists on the local side, the remote side is updated if a branch of the same name already exists on the remote side. This is the default operation mode @@ -138,6 +138,11 @@ useful if you write an alias or script around 'git-push'. --verbose:: Run verbosely. +-q:: +--quiet:: + Suppress all output, including the listing of updated refs, + unless an error occurs. + include::urls-remotes.txt[] OUTPUT @@ -171,10 +176,10 @@ summary:: For a successfully pushed ref, the summary shows the old and new values of the ref in a form suitable for using as an argument to `git log` (this is `<old>..<new>` in most cases, and - `<old>...<new>` for forced non-fast forward updates). For a + `<old>...<new>` for forced non-fast-forward updates). For a failed update, more details are given for the failure. The string `rejected` indicates that git did not try to send the - ref at all (typically because it is not a fast forward). The + ref at all (typically because it is not a fast-forward). The string `remote rejected` indicates that the remote end refused the update; this rejection is typically caused by a hook on the remote side. The string `remote failure` indicates that the @@ -342,9 +347,9 @@ git push origin :experimental:: git push origin {plus}dev:master:: Update the origin repository's master branch with the dev branch, - allowing non-fast forward updates. *This can leave unreferenced + allowing non-fast-forward updates. *This can leave unreferenced commits dangling in the origin repository.* Consider the - following situation, where a fast forward is not possible: + following situation, where a fast-forward is not possible: + ---- o---o---o---A---B origin/master diff --git a/Documentation/git-read-tree.txt b/Documentation/git-read-tree.txt index 4a932b08c6..a10ce4ba40 100644 --- a/Documentation/git-read-tree.txt +++ b/Documentation/git-read-tree.txt @@ -144,7 +144,7 @@ Two Tree Merge Typically, this is invoked as `git read-tree -m $H $M`, where $H is the head commit of the current repository, and $M is the head of a foreign tree, which is simply ahead of $H (i.e. we are in a -fast forward situation). +fast-forward situation). When two trees are specified, the user is telling 'git-read-tree' the following: diff --git a/Documentation/git-rebase.txt b/Documentation/git-rebase.txt index 0aefc34d0d..ca5e1e8653 100644 --- a/Documentation/git-rebase.txt +++ b/Documentation/git-rebase.txt @@ -228,13 +228,23 @@ OPTIONS Use merging strategies to rebase. When the recursive (default) merge strategy is used, this allows rebase to be aware of renames on the upstream side. ++ +Note that a rebase merge works by replaying each commit from the working +branch on top of the <upstream> branch. Because of this, when a merge +conflict happens, the side reported as 'ours' is the so-far rebased +series, starting with <upstream>, and 'theirs' is the working branch. In +other words, the sides are swapped. -s <strategy>:: --strategy=<strategy>:: Use the given merge strategy. - If there is no `-s` option, a built-in list of strategies - is used instead ('git-merge-recursive' when merging a single - head, 'git-merge-octopus' otherwise). This implies --merge. + If there is no `-s` option 'git-merge-recursive' is used + instead. This implies --merge. ++ +Because 'git-rebase' replays each commit from the working branch +on top of the <upstream> branch using the given strategy, using +the 'ours' strategy simply discards all patches from the <branch>, +which makes little sense. -q:: --quiet:: @@ -368,14 +378,17 @@ By replacing the command "pick" with the command "edit", you can tell the files and/or the commit message, amend the commit, and continue rebasing. +If you just want to edit the commit message for a commit, replace the +command "pick" with the command "reword". + If you want to fold two or more commits into one, replace the command "pick" with "squash" for the second and subsequent commit. If the commits had different authors, it will attribute the squashed commit to the author of the first commit. -In both cases, or when a "pick" does not succeed (because of merge -errors), the loop will stop to let you fix things, and you can continue -the loop with `git rebase --continue`. +'git-rebase' will stop when "pick" has been replaced with "edit" or +when a command fails due to merge errors. When you are done editing +and/or resolving conflicts you can continue with `git rebase --continue`. For example, if you want to reorder the last 5 commits, such that what was HEAD~4 becomes the new HEAD. To achieve that, you would call diff --git a/Documentation/git-receive-pack.txt b/Documentation/git-receive-pack.txt index 514f03c979..cb5f405280 100644 --- a/Documentation/git-receive-pack.txt +++ b/Documentation/git-receive-pack.txt @@ -20,7 +20,7 @@ The UI for the protocol is on the 'git-send-pack' side, and the program pair is meant to be used to push updates to remote repository. For pull operations, see linkgit:git-fetch-pack[1]. -The command allows for creation and fast forwarding of sha1 refs +The command allows for creation and fast-forwarding of sha1 refs (heads/tags) on the remote end (strictly speaking, it is the local end 'git-receive-pack' runs, but to the user who is sitting at the send-pack end, it is updating the remote. Confused?) diff --git a/Documentation/git-remote-helpers.txt b/Documentation/git-remote-helpers.txt index 173ee232f2..8beb42dbb9 100644 --- a/Documentation/git-remote-helpers.txt +++ b/Documentation/git-remote-helpers.txt @@ -34,15 +34,51 @@ Commands are given by the caller on the helper's standard input, one per line. value of the ref. A space-separated list of attributes follows the name; unrecognized attributes are ignored. After the complete list, outputs a blank line. ++ +If 'push' is supported this may be called as 'list for-push' +to obtain the current refs prior to sending one or more 'push' +commands to the helper. + +'option' <name> <value>:: + Set the transport helper option <name> to <value>. Outputs a + single line containing one of 'ok' (option successfully set), + 'unsupported' (option not recognized) or 'error <msg>' + (option <name> is supported but <value> is not correct + for it). Options should be set before other commands, + and may how those commands behave. ++ +Supported if the helper has the "option" capability. 'fetch' <sha1> <name>:: - Fetches the given object, writing the necessary objects to the - database. Outputs a blank line when the fetch is - complete. Only objects which were reported in the ref list - with a sha1 may be fetched this way. + Fetches the given object, writing the necessary objects + to the database. Fetch commands are sent in a batch, one + per line, and the batch is terminated with a blank line. + Outputs a single blank line when all fetch commands in the + same batch are complete. Only objects which were reported + in the ref list with a sha1 may be fetched this way. ++ +Optionally may output a 'lock <file>' line indicating a file under +GIT_DIR/objects/pack which is keeping a pack until refs can be +suitably updated. + Supported if the helper has the "fetch" capability. +'push' +<src>:<dst>:: + Pushes the given <src> commit or branch locally to the + remote branch described by <dst>. A batch sequence of + one or more push commands is terminated with a blank line. ++ +Zero or more protocol options may be entered after the last 'push' +command, before the batch's terminating blank line. ++ +When the push is complete, outputs one or more 'ok <dst>' or +'error <dst> <why>?' lines to indicate success or failure of +each pushed ref. The status report output is terminated by +a blank line. The option field <why> may be quoted in a C +style string if it contains an LF. ++ +Supported if the helper has the "push" capability. + If a fatal error occurs, the program writes the error message to stderr and exits. The caller should expect that a suitable error message has been printed if the child closes the connection without @@ -57,10 +93,49 @@ CAPABILITIES 'fetch':: This helper supports the 'fetch' command. +'option':: + This helper supports the option command. + +'push':: + This helper supports the 'push' command. + REF LIST ATTRIBUTES ------------------- -None are defined yet, but the caller must accept any which are supplied. +'for-push':: + The caller wants to use the ref list to prepare push + commands. A helper might chose to acquire the ref list by + opening a different type of connection to the destination. + +OPTIONS +------- +'option verbosity' <N>:: + Change the level of messages displayed by the helper. + When N is 0 the end-user has asked the process to be + quiet, and the helper should produce only error output. + N of 1 is the default level of verbosity, higher values + of N correspond to the number of -v flags passed on the + command line. + +'option progress' \{'true'|'false'\}:: + Enable (or disable) progress messages displayed by the + transport helper during a command. + +'option depth' <depth>:: + Deepen the history of a shallow repository. + +'option followtags' \{'true'|'false'\}:: + If enabled the helper should automatically fetch annotated + tag objects if the object the tag points at was transferred + during the fetch command. If the tag is not fetched by + the helper a second fetch command will usually be sent to + ask for the tag specifically. Some helpers may be able to + use this option to avoid a second network connection. + +'option dry-run' \{'true'|'false'\}: + If true, pretend the operation completed successfully, + but don't actually change any repository data. For most + helpers this only applies to the 'push', if supported. Documentation ------------- diff --git a/Documentation/git-remote.txt b/Documentation/git-remote.txt index 82a3d29673..c272c92d4b 100644 --- a/Documentation/git-remote.txt +++ b/Documentation/git-remote.txt @@ -13,10 +13,10 @@ SYNOPSIS 'git remote add' [-t <branch>] [-m <master>] [-f] [--mirror] <name> <url> 'git remote rename' <old> <new> 'git remote rm' <name> -'git remote set-head' <name> [-a | -d | <branch>] -'git remote show' [-n] <name> +'git remote set-head' <name> (-a | -d | <branch>) +'git remote' [-v | --verbose] 'show' [-n] <name> 'git remote prune' [-n | --dry-run] <name> -'git remote update' [-p | --prune] [group | remote]... +'git remote' [-v | --verbose] 'update' [-p | --prune] [group | remote]... DESCRIPTION ----------- @@ -30,6 +30,7 @@ OPTIONS -v:: --verbose:: Be a little more verbose and show remote url after name. + NOTE: This must be placed between `remote` and `subcommand`. COMMANDS diff --git a/Documentation/git-replace.txt b/Documentation/git-replace.txt index 915cb77b29..65a0da508a 100644 --- a/Documentation/git-replace.txt +++ b/Documentation/git-replace.txt @@ -17,12 +17,36 @@ DESCRIPTION Adds a 'replace' reference in `.git/refs/replace/` The name of the 'replace' reference is the SHA1 of the object that is -replaced. The content of the replace reference is the SHA1 of the +replaced. The content of the 'replace' reference is the SHA1 of the replacement object. -Unless `-f` is given, the replace reference must not yet exist in +Unless `-f` is given, the 'replace' reference must not yet exist in `.git/refs/replace/` directory. +Replacement references will be used by default by all git commands +except those doing reachability traversal (prune, pack transfer and +fsck). + +It is possible to disable use of replacement references for any +command using the `--no-replace-objects` option just after 'git'. + +For example if commit 'foo' has been replaced by commit 'bar': + +------------------------------------------------ +$ git --no-replace-objects cat-file commit foo +------------------------------------------------ + +shows information about commit 'foo', while: + +------------------------------------------------ +$ git cat-file commit foo +------------------------------------------------ + +shows information about commit 'bar'. + +The 'GIT_NO_REPLACE_OBJECTS' environment variable can be set to +achieve the same effect as the `--no-replace-objects` option. + OPTIONS ------- -f:: @@ -54,6 +78,7 @@ SEE ALSO -------- linkgit:git-tag[1] linkgit:git-branch[1] +linkgit:git[1] Author ------ diff --git a/Documentation/git-reset.txt b/Documentation/git-reset.txt index 469cf6dbac..2d27e405a3 100644 --- a/Documentation/git-reset.txt +++ b/Documentation/git-reset.txt @@ -150,7 +150,7 @@ Automatic merge failed; fix conflicts and then commit the result. $ git reset --hard <2> $ git pull . topic/branch <3> Updating from 41223... to 13134... -Fast forward +Fast-forward $ git reset --hard ORIG_HEAD <4> ------------ + @@ -161,7 +161,7 @@ right now, so you decide to do that later. which is a synonym for "git reset --hard HEAD" clears the mess from the index file and the working tree. <3> Merge a topic branch into the current branch, which resulted -in a fast forward. +in a fast-forward. <4> But you decided that the topic branch is not ready for public consumption yet. "pull" or "merge" always leaves the original tip of the current branch in ORIG_HEAD, so resetting hard to it diff --git a/Documentation/git-send-email.txt b/Documentation/git-send-email.txt index 767cf4d4bd..c85d7f4385 100644 --- a/Documentation/git-send-email.txt +++ b/Documentation/git-send-email.txt @@ -60,8 +60,8 @@ The --bcc option must be repeated for each user you want on the bcc list. The --cc option must be repeated for each user you want on the cc list. --compose:: - Use $GIT_EDITOR, core.editor, $VISUAL, or $EDITOR to edit an - introductory message for the patch series. + Invoke a text editor (see GIT_EDITOR in linkgit:git-var[1]) + to edit an introductory message for the patch series. + When '--compose' is used, git send-email will use the From, Subject, and In-Reply-To headers specified in the message. If the body of the message diff --git a/Documentation/git-send-pack.txt b/Documentation/git-send-pack.txt index 399821832c..5a04c6eaf7 100644 --- a/Documentation/git-send-pack.txt +++ b/Documentation/git-send-pack.txt @@ -105,11 +105,11 @@ name. See linkgit:git-rev-parse[1]. Without '--force', the <src> ref is stored at the remote only if <dst> does not exist, or <dst> is a proper subset (i.e. an -ancestor) of <src>. This check, known as "fast forward check", +ancestor) of <src>. This check, known as "fast-forward check", is performed in order to avoid accidentally overwriting the remote ref and lose other peoples' commits from there. -With '--force', the fast forward check is disabled for all refs. +With '--force', the fast-forward check is disabled for all refs. Optionally, a <ref> parameter can be prefixed with a plus '+' sign to disable the fast-forward check only on that ref. diff --git a/Documentation/git-show-ref.txt b/Documentation/git-show-ref.txt index f4429bdc68..70f400b266 100644 --- a/Documentation/git-show-ref.txt +++ b/Documentation/git-show-ref.txt @@ -8,7 +8,7 @@ git-show-ref - List references in a local repository SYNOPSIS -------- [verse] -'git show-ref' [-q|--quiet] [--verify] [-h|--head] [-d|--dereference] +'git show-ref' [-q|--quiet] [--verify] [--head] [-d|--dereference] [-s|--hash[=<n>]] [--abbrev[=<n>]] [--tags] [--heads] [--] <pattern>... 'git show-ref' --exclude-existing[=<pattern>] < ref-list @@ -30,7 +30,6 @@ the `.git` directory. OPTIONS ------- --h:: --head:: Show the HEAD reference. diff --git a/Documentation/git-submodule.txt b/Documentation/git-submodule.txt index 5ccdd18c89..4ef70c42eb 100644 --- a/Documentation/git-submodule.txt +++ b/Documentation/git-submodule.txt @@ -10,7 +10,7 @@ SYNOPSIS -------- [verse] 'git submodule' [--quiet] add [-b branch] - [--reference <repository>] [--] <repository> <path> + [--reference <repository>] [--] <repository> [<path>] 'git submodule' [--quiet] status [--cached] [--recursive] [--] [<path>...] 'git submodule' [--quiet] init [--] [<path>...] 'git submodule' [--quiet] update [--init] [-N|--no-fetch] [--rebase] @@ -69,7 +69,11 @@ add:: to the changeset to be committed next to the current project: the current project is termed the "superproject". + -This requires two arguments: <repository> and <path>. +This requires at least one argument: <repository>. The optional +argument <path> is the relative location for the cloned submodule +to exist in the superproject. If <path> is not given, the +"humanish" part of the source repository is used ("repo" for +"/path/to/repo.git" and "foo" for "host.xz:foo/.git"). + <repository> is the URL of the new submodule's origin repository. This may be either an absolute URL, or (if it begins with ./ diff --git a/Documentation/git-svn.txt b/Documentation/git-svn.txt index 1812890a7e..4cdca0d874 100644 --- a/Documentation/git-svn.txt +++ b/Documentation/git-svn.txt @@ -320,6 +320,13 @@ Any other arguments are passed directly to 'git log' directories. The output is suitable for appending to the $GIT_DIR/info/exclude file. +'mkdirs':: + Attempts to recreate empty directories that core git cannot track + based on information in $GIT_DIR/svn/<refname>/unhandled.log files. + Empty directories are automatically recreated when using + "git svn clone" and "git svn rebase", so "mkdirs" is intended + for use after commands like "git checkout" or "git reset". + 'commit-diff':: Commits the diff of two tree-ish arguments from the command-line. This command does not rely on being inside an `git svn @@ -735,6 +742,16 @@ merges you've made. Furthermore, if you merge or pull from a git branch that is a mirror of an SVN branch, 'dcommit' may commit to the wrong branch. +If you do merge, note the following rule: 'git svn dcommit' will +attempt to commit on top of the SVN commit named in +------------------------------------------------------------------------ +git log --grep=^git-svn-id: --first-parent -1 +------------------------------------------------------------------------ +You 'must' therefore ensure that the most recent commit of the branch +you want to dcommit to is the 'first' parent of the merge. Chaos will +ensue otherwise, especially if the first parent is an older commit on +the same SVN branch. + 'git clone' does not clone branches under the refs/remotes/ hierarchy or any 'git svn' metadata, or config. So repositories created and managed with using 'git svn' should use 'rsync' for cloning, if cloning is to be done diff --git a/Documentation/git-update-index.txt b/Documentation/git-update-index.txt index 25e0bbea86..6052484ab9 100644 --- a/Documentation/git-update-index.txt +++ b/Documentation/git-update-index.txt @@ -99,6 +99,10 @@ in the index e.g. when merging in a commit; thus, in case the assumed-untracked file is changed upstream, you will need to handle the situation manually. +--really-refresh:: + Like '--refresh', but checks stat information unconditionally, + without regard to the "assume unchanged" setting. + -g:: --again:: Runs 'git-update-index' itself on the paths whose index @@ -308,7 +312,7 @@ Configuration ------------- The command honors `core.filemode` configuration variable. If -your repository is on an filesystem whose executable bits are +your repository is on a filesystem whose executable bits are unreliable, this should be set to 'false' (see linkgit:git-config[1]). This causes the command to ignore differences in file modes recorded in the index and the file mode on the filesystem if they differ only on diff --git a/Documentation/git-var.txt b/Documentation/git-var.txt index e2f4c0901b..ef6aa81872 100644 --- a/Documentation/git-var.txt +++ b/Documentation/git-var.txt @@ -36,6 +36,20 @@ GIT_AUTHOR_IDENT:: GIT_COMMITTER_IDENT:: The person who put a piece of code into git. +GIT_EDITOR:: + Text editor for use by git commands. The value is meant to be + interpreted by the shell when it is used. Examples: `~/bin/vi`, + `$SOME_ENVIRONMENT_VARIABLE`, `"C:\Program Files\Vim\gvim.exe" + --nofork`. The order of preference is the `$GIT_EDITOR` + environment variable, then `core.editor` configuration, then + `$VISUAL`, then `$EDITOR`, and then finally 'vi'. + +GIT_PAGER:: + Text viewer for use by git commands (e.g., 'less'). The value + is meant to be interpreted by the shell. The order of preference + is the `$GIT_PAGER` environment variable, then `core.pager` + configuration, then `$PAGER`, and then finally 'less'. + Diagnostics ----------- You don't exist. Go away!:: diff --git a/Documentation/git.txt b/Documentation/git.txt index d97aaf5bf8..8e577cc4fe 100644 --- a/Documentation/git.txt +++ b/Documentation/git.txt @@ -10,7 +10,7 @@ SYNOPSIS -------- [verse] 'git' [--version] [--exec-path[=GIT_EXEC_PATH]] [--html-path] - [-p|--paginate|--no-pager] + [-p|--paginate|--no-pager] [--no-replace-objects] [--bare] [--git-dir=GIT_DIR] [--work-tree=GIT_WORK_TREE] [--help] COMMAND [ARGS] @@ -43,9 +43,12 @@ unreleased) version of git, that is available from 'master' branch of the `git.git` repository. Documentation for older releases are available here: -* link:v1.6.5/git.html[documentation for release 1.6.5] +* link:v1.6.5.3/git.html[documentation for release 1.6.5.3] * release notes for + link:RelNotes-1.6.5.3.txt[1.6.5.3], + link:RelNotes-1.6.5.2.txt[1.6.5.2], + link:RelNotes-1.6.5.1.txt[1.6.5.1], link:RelNotes-1.6.5.txt[1.6.5]. * link:v1.6.4.4/git.html[documentation for release 1.6.4.4] @@ -237,6 +240,10 @@ help ...`. environment is not set, it is set to the current working directory. +--no-replace-objects:: + Do not use replacement refs to replace git objects. See + linkgit:git-replace[1] for more information. + FURTHER DOCUMENTATION --------------------- diff --git a/Documentation/gitattributes.txt b/Documentation/gitattributes.txt index 1195e83b6e..1f472cea59 100644 --- a/Documentation/gitattributes.txt +++ b/Documentation/gitattributes.txt @@ -560,6 +560,16 @@ in the file. E.g. the string `$Format:%H$` will be replaced by the commit hash. +Packing objects +~~~~~~~~~~~~~~~ + +`delta` +^^^^^^^ + +Delta compression will not be attempted for blobs for paths with the +attribute `delta` set to false. + + Viewing files in GUI tools ~~~~~~~~~~~~~~~~~~~~~~~~~~ diff --git a/Documentation/gitcore-tutorial.txt b/Documentation/gitcore-tutorial.txt index b3640c4e64..e237394397 100644 --- a/Documentation/gitcore-tutorial.txt +++ b/Documentation/gitcore-tutorial.txt @@ -185,7 +185,7 @@ object is. git will tell you that you have a "blob" object (i.e., just a regular file), and you can see the contents with ---------------- -$ git cat-file "blob" 557db03 +$ git cat-file blob 557db03 ---------------- which will print out "Hello World". The object `557db03` is nothing @@ -993,7 +993,7 @@ would be different) ---------------- Updating from ae3a2da... to a80b4aa.... -Fast forward (no commit created; -m option ignored) +Fast-forward (no commit created; -m option ignored) example | 1 + hello | 1 + 2 files changed, 2 insertions(+), 0 deletions(-) @@ -1003,7 +1003,7 @@ Because your branch did not contain anything more than what had already been merged into the `master` branch, the merge operation did not actually do a merge. Instead, it just updated the top of the tree of your branch to that of the `master` branch. This is -often called 'fast forward' merge. +often called 'fast-forward' merge. You can run `gitk \--all` again to see how the commit ancestry looks like, or run 'show-branch', which tells you this. @@ -1186,9 +1186,9 @@ $ git show-branch * [master] Some fun. ! [mybranch] Some work. -- - + [mybranch] Some work. * [master] Some fun. -*+ [mybranch^] New day. + + [mybranch] Some work. +*+ [master^] Initial commit ------------ Now we are ready to experiment with the merge by hand. @@ -1204,11 +1204,11 @@ $ mb=$(git merge-base HEAD mybranch) The command writes the commit object name of the common ancestor to the standard output, so we captured its output to a variable, because we will be using it in the next step. By the way, the common -ancestor commit is the "New day." commit in this case. You can +ancestor commit is the "Initial commit" commit in this case. You can tell it by: ------------ -$ git name-rev $mb +$ git name-rev --name-only --tags $mb my-first-tag ------------ @@ -1237,8 +1237,8 @@ inspect the index file with this command: ------------ $ git ls-files --stage 100644 7f8b141b65fdcee47321e399a2598a235a032422 0 example -100644 263414f423d0e4d70dae8fe53fa34614ff3e2860 1 hello -100644 06fa6a24256dc7e560efa5687fa84b51f0263c3a 2 hello +100644 557db03de997c86a4a028e1ebd3a1ceb225be238 1 hello +100644 ba42a2a96e3027f3333e13ede4ccf4498c3ae942 2 hello 100644 cc44c73eb783565da5831b4d820c962954019b69 3 hello ------------ @@ -1253,8 +1253,8 @@ To look at only non-zero stages, use `\--unmerged` flag: ------------ $ git ls-files --unmerged -100644 263414f423d0e4d70dae8fe53fa34614ff3e2860 1 hello -100644 06fa6a24256dc7e560efa5687fa84b51f0263c3a 2 hello +100644 557db03de997c86a4a028e1ebd3a1ceb225be238 1 hello +100644 ba42a2a96e3027f3333e13ede4ccf4498c3ae942 2 hello 100644 cc44c73eb783565da5831b4d820c962954019b69 3 hello ------------ @@ -1283,8 +1283,8 @@ the working tree.. This can be seen if you run `ls-files ------------ $ git ls-files --stage 100644 7f8b141b65fdcee47321e399a2598a235a032422 0 example -100644 263414f423d0e4d70dae8fe53fa34614ff3e2860 1 hello -100644 06fa6a24256dc7e560efa5687fa84b51f0263c3a 2 hello +100644 557db03de997c86a4a028e1ebd3a1ceb225be238 1 hello +100644 ba42a2a96e3027f3333e13ede4ccf4498c3ae942 2 hello 100644 cc44c73eb783565da5831b4d820c962954019b69 3 hello ------------ diff --git a/Documentation/githooks.txt b/Documentation/githooks.txt index 06e0f315c3..4cc3d1387f 100644 --- a/Documentation/githooks.txt +++ b/Documentation/githooks.txt @@ -229,7 +229,7 @@ from updating that ref. This hook can be used to prevent 'forced' update on certain refs by making sure that the object name is a commit object that is a descendant of the commit object named by the old object name. -That is, to enforce a "fast forward only" policy. +That is, to enforce a "fast-forward only" policy. It could also be used to log the old..new status. However, it does not know the entire set of branches, so it would end up diff --git a/Documentation/gitworkflows.txt b/Documentation/gitworkflows.txt index 2b021e3c15..065441df64 100644 --- a/Documentation/gitworkflows.txt +++ b/Documentation/gitworkflows.txt @@ -209,6 +209,121 @@ chance to see if their in-progress work will be compatible. `git.git` has such an official throw-away integration branch called 'pu'. +Branch management for a release +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Assuming you are using the merge approach discussed above, when you +are releasing your project you will need to do some additional branch +management work. + +A feature release is created from the 'master' branch, since 'master' +tracks the commits that should go into the next feature release. + +The 'master' branch is supposed to be a superset of 'maint'. If this +condition does not hold, then 'maint' contains some commits that +are not included on 'master'. The fixes represented by those commits +will therefore not be included in your feature release. + +To verify that 'master' is indeed a superset of 'maint', use git log: + +.Verify 'master' is a superset of 'maint' +[caption="Recipe: "] +===================================== +`git log master..maint` +===================================== + +This command should not list any commits. Otherwise, check out +'master' and merge 'maint' into it. + +Now you can proceed with the creation of the feature release. Apply a +tag to the tip of 'master' indicating the release version: + +.Release tagging +[caption="Recipe: "] +===================================== +`git tag -s -m "GIT X.Y.Z" vX.Y.Z master` +===================================== + +You need to push the new tag to a public git server (see +"DISTRIBUTED WORKFLOWS" below). This makes the tag available to +others tracking your project. The push could also trigger a +post-update hook to perform release-related items such as building +release tarballs and preformatted documentation pages. + +Similarly, for a maintenance release, 'maint' is tracking the commits +to be released. Therefore, in the steps above simply tag and push +'maint' rather than 'master'. + + +Maintenance branch management after a feature release +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +After a feature release, you need to manage your maintenance branches. + +First, if you wish to continue to release maintenance fixes for the +feature release made before the recent one, then you must create +another branch to track commits for that previous release. + +To do this, the current maintenance branch is copied to another branch +named with the previous release version number (e.g. maint-X.Y.(Z-1) +where X.Y.Z is the current release). + +.Copy maint +[caption="Recipe: "] +===================================== +`git branch maint-X.Y.(Z-1) maint` +===================================== + +The 'maint' branch should now be fast-forwarded to the newly released +code so that maintenance fixes can be tracked for the current release: + +.Update maint to new release +[caption="Recipe: "] +===================================== +* `git checkout maint` +* `git merge --ff-only master` +===================================== + +If the merge fails because it is not a fast-forward, then it is +possible some fixes on 'maint' were missed in the feature release. +This will not happen if the content of the branches was verified as +described in the previous section. + + +Branch management for next and pu after a feature release +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +After a feature release, the integration branch 'next' may optionally be +rewound and rebuilt from the tip of 'master' using the surviving +topics on 'next': + +.Rewind and rebuild next +[caption="Recipe: "] +===================================== +* `git checkout next` +* `git reset --hard master` +* `git merge ai/topic_in_next1` +* `git merge ai/topic_in_next2` +* ... +===================================== + +The advantage of doing this is that the history of 'next' will be +clean. For example, some topics merged into 'next' may have initially +looked promising, but were later found to be undesirable or premature. +In such a case, the topic is reverted out of 'next' but the fact +remains in the history that it was once merged and reverted. By +recreating 'next', you give another incarnation of such topics a clean +slate to retry, and a feature release is a good point in history to do +so. + +If you do this, then you should make a public announcement indicating +that 'next' was rewound and rebuilt. + +The same rewind and rebuild process may be followed for 'pu'. A public +announcement is not necessary since 'pu' is a throw-away branch, as +described above. + + DISTRIBUTED WORKFLOWS --------------------- diff --git a/Documentation/glossary-content.txt b/Documentation/glossary-content.txt index 43d84d15e9..1f029f8aa0 100644 --- a/Documentation/glossary-content.txt +++ b/Documentation/glossary-content.txt @@ -124,7 +124,7 @@ to point at the new commit. An evil merge is a <<def_merge,merge>> that introduces changes that do not appear in any <<def_parent,parent>>. -[[def_fast_forward]]fast forward:: +[[def_fast_forward]]fast-forward:: A fast-forward is a special type of <<def_merge,merge>> where you have a <<def_revision,revision>> and you are "merging" another <<def_branch,branch>>'s changes that happen to be a descendant of what @@ -220,7 +220,7 @@ to point at the new commit. conflict, manual intervention may be required to complete the merge. + -As a noun: unless it is a <<def_fast_forward,fast forward>>, a +As a noun: unless it is a <<def_fast_forward,fast-forward>>, a successful merge results in the creation of a new <<def_commit,commit>> representing the result of the merge, and having as <<def_parent,parents>> the tips of the merged <<def_branch,branches>>. diff --git a/Documentation/howto/maintain-git.txt b/Documentation/howto/maintain-git.txt index 4357e26913..d527b30770 100644 --- a/Documentation/howto/maintain-git.txt +++ b/Documentation/howto/maintain-git.txt @@ -59,7 +59,7 @@ The policy. not yet pass the criteria set for 'next'. - The tips of 'master', 'maint' and 'next' branches will always - fast forward, to allow people to build their own + fast-forward, to allow people to build their own customization on top of them. - Usually 'master' contains all of 'maint', 'next' contains all diff --git a/Documentation/howto/revert-branch-rebase.txt b/Documentation/howto/revert-branch-rebase.txt index e70d8a31e7..8c32da6deb 100644 --- a/Documentation/howto/revert-branch-rebase.txt +++ b/Documentation/howto/revert-branch-rebase.txt @@ -85,7 +85,7 @@ Fortunately I did not have to; what I have in the current branch ------------------------------------------------ $ git checkout master -$ git merge revert-c99 ;# this should be a fast forward +$ git merge revert-c99 ;# this should be a fast-forward Updating from 10d781b9caa4f71495c7b34963bef137216f86a8 to e3a693c... cache.h | 8 ++++---- commit.c | 2 +- @@ -95,7 +95,7 @@ Updating from 10d781b9caa4f71495c7b34963bef137216f86a8 to e3a693c... 5 files changed, 8 insertions(+), 8 deletions(-) ------------------------------------------------ -There is no need to redo the test at this point. We fast forwarded +There is no need to redo the test at this point. We fast-forwarded and we know 'master' matches 'revert-c99' exactly. In fact: ------------------------------------------------ diff --git a/Documentation/howto/update-hook-example.txt b/Documentation/howto/update-hook-example.txt index 697d918885..b7f8d416d6 100644 --- a/Documentation/howto/update-hook-example.txt +++ b/Documentation/howto/update-hook-example.txt @@ -76,7 +76,7 @@ case "$1" in if expr "$2" : '0*$' >/dev/null; then info "The branch '$1' is new..." else - # updating -- make sure it is a fast forward + # updating -- make sure it is a fast-forward mb=$(git-merge-base "$2" "$3") case "$mb,$2" in "$2,$mb") info "Update is fast-forward" ;; diff --git a/Documentation/manpage-quote-apos.xsl b/Documentation/manpage-quote-apos.xsl new file mode 100644 index 0000000000..aeb8839f33 --- /dev/null +++ b/Documentation/manpage-quote-apos.xsl @@ -0,0 +1,16 @@ +<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" + version="1.0"> + +<!-- work around newer groff/man setups using a prettier apostrophe + that unfortunately does not quote anything when cut&pasting + examples to the shell --> +<xsl:template name="escape.apostrophe"> + <xsl:param name="content"/> + <xsl:call-template name="string.subst"> + <xsl:with-param name="string" select="$content"/> + <xsl:with-param name="target">'</xsl:with-param> + <xsl:with-param name="replacement">\(aq</xsl:with-param> + </xsl:call-template> +</xsl:template> + +</xsl:stylesheet> diff --git a/Documentation/merge-config.txt b/Documentation/merge-config.txt index c0f96e7070..a403155052 100644 --- a/Documentation/merge-config.txt +++ b/Documentation/merge-config.txt @@ -23,7 +23,7 @@ merge.tool:: Controls which merge resolution program is used by linkgit:git-mergetool[1]. Valid built-in values are: "kdiff3", "tkdiff", "meld", "xxdiff", "emerge", "vimdiff", "gvimdiff", - "diffuse", "ecmerge", "tortoisemerge", "araxis", and + "diffuse", "ecmerge", "tortoisemerge", "p4merge", "araxis" and "opendiff". Any other value is treated is custom merge tool and there must be a corresponding mergetool.<tool>.cmd option. diff --git a/Documentation/merge-options.txt b/Documentation/merge-options.txt index adadf8e4bf..fec3394305 100644 --- a/Documentation/merge-options.txt +++ b/Documentation/merge-options.txt @@ -1,43 +1,42 @@ --q:: ---quiet:: - Operate quietly. - --v:: ---verbose:: - Be verbose. - ---stat:: - Show a diffstat at the end of the merge. The diffstat is also - controlled by the configuration option merge.stat. - --n:: ---no-stat:: - Do not show a diffstat at the end of the merge. +--commit:: +--no-commit:: + Perform the merge and commit the result. This option can + be used to override --no-commit. ++ +With --no-commit perform the merge but pretend the merge +failed and do not autocommit, to give the user a chance to +inspect and further tweak the merge result before committing. ---summary:: ---no-summary:: - Synonyms to --stat and --no-stat; these are deprecated and will be - removed in the future. +--ff:: +--no-ff:: + Do not generate a merge commit if the merge resolved as + a fast-forward, only update the branch pointer. This is + the default behavior of git-merge. ++ +With --no-ff Generate a merge commit even if the merge +resolved as a fast-forward. --log:: +--no-log:: In addition to branch names, populate the log message with one-line descriptions from the actual commits that are being merged. ++ +With --no-log do not list one-line descriptions from the +actual commits being merged. ---no-log:: - Do not list one-line descriptions from the actual commits being - merged. - ---no-commit:: - Perform the merge but pretend the merge failed and do - not autocommit, to give the user a chance to inspect and - further tweak the merge result before committing. ---commit:: - Perform the merge and commit the result. This option can - be used to override --no-commit. +--stat:: +-n:: +--no-stat:: + Show a diffstat at the end of the merge. The diffstat is also + controlled by the configuration option merge.stat. ++ +With -n or --no-stat do not show a diffstat at the end of the +merge. --squash:: +--no-squash:: Produce the working tree and index state as if a real merge happened (except for the merge information), but do not actually make a commit or @@ -46,19 +45,14 @@ commit. This allows you to create a single commit on top of the current branch whose effect is the same as merging another branch (or more in case of an octopus). ++ +With --no-squash perform the merge and commit the result. This +option can be used to override --squash. ---no-squash:: - Perform the merge and commit the result. This option can - be used to override --squash. - ---no-ff:: - Generate a merge commit even if the merge resolved as a - fast-forward. - ---ff:: - Do not generate a merge commit if the merge resolved as - a fast-forward, only update the branch pointer. This is - the default behavior of git-merge. +--ff-only:: + Refuse to merge and exit with a non-zero status unless the + current `HEAD` is already up-to-date or the merge can be + resolved as a fast-forward. -s <strategy>:: --strategy=<strategy>:: @@ -67,3 +61,16 @@ If there is no `-s` option, a built-in list of strategies is used instead ('git-merge-recursive' when merging a single head, 'git-merge-octopus' otherwise). + +--summary:: +--no-summary:: + Synonyms to --stat and --no-stat; these are deprecated and will be + removed in the future. + +-q:: +--quiet:: + Operate quietly. + +-v:: +--verbose:: + Be verbose. diff --git a/Documentation/merge-strategies.txt b/Documentation/merge-strategies.txt index 4365b7e842..42910a3d5e 100644 --- a/Documentation/merge-strategies.txt +++ b/Documentation/merge-strategies.txt @@ -29,8 +29,9 @@ octopus:: pulling or merging more than one branch. ours:: - This resolves any number of heads, but the result of the - merge is always the current branch head. It is meant to + This resolves any number of heads, but the resulting tree of the + merge is always that of the current branch head, effectively + ignoring all changes from all other branches. It is meant to be used to supersede old development history of side branches. diff --git a/Documentation/pretty-formats.txt b/Documentation/pretty-formats.txt index 2a845b1e57..0683fb3a3d 100644 --- a/Documentation/pretty-formats.txt +++ b/Documentation/pretty-formats.txt @@ -123,6 +123,10 @@ The placeholders are: - '%s': subject - '%f': sanitized subject line, suitable for a filename - '%b': body +- '%N': commit notes +- '%gD': reflog selector, e.g., `refs/stash@\{1\}` +- '%gd': shortened reflog selector, e.g., `stash@\{1\}` +- '%gs': reflog subject - '%Cred': switch color to red - '%Cgreen': switch color to green - '%Cblue': switch color to blue @@ -131,6 +135,14 @@ The placeholders are: - '%m': left, right or boundary mark - '%n': newline - '%x00': print a byte from a hex code +- '%w([<w>[,<i1>[,<i2>]]])': switch line wrapping, like the -w option of + linkgit:git-shortlog[1]. + +NOTE: Some placeholders may depend on other options given to the +revision traversal engine. For example, the `%g*` reflog options will +insert an empty string unless we are traversing reflog entries (e.g., by +`git log -g`). The `%d` placeholder will use the "short" decoration +format if `--decorate` was not already provided on the command line. * 'tformat:' + diff --git a/Documentation/pt_BR/gittutorial.txt b/Documentation/pt_BR/gittutorial.txt index 81e7ad7df4..beba065252 100644 --- a/Documentation/pt_BR/gittutorial.txt +++ b/Documentation/pt_BR/gittutorial.txt @@ -1,15 +1,15 @@ gittutorial(7) ============== -NAME +NOME ---- gittutorial - Um tutorial de introdução ao git (para versão 1.5.1 ou mais nova) -SYNOPSIS +SINOPSE -------- git * -DESCRIPTION +DESCRIÇÃO ----------- Este tutorial explica como importar um novo projeto para o git, @@ -64,11 +64,11 @@ Git irá responder Initialized empty Git repository in .git/ ------------------------------------------------ -Você agora iniciou seu diretório de trabalho--você deve ter notado um -novo diretório criado, com o nome de ".git". +Agora que você iniciou seu diretório de trabalho, você deve ter notado que um +novo diretório foi criado com o nome de ".git". A seguir, diga ao git para gravar um instantâneo do conteúdo de todos os -arquivos sob o diretório corrente (note o '.'), com 'git-add': +arquivos sob o diretório atual (note o '.'), com 'git-add': ------------------------------------------------ $ git add . @@ -126,8 +126,8 @@ mudanças com: $ git commit ------------------------------------------------ -Isto irá novamente te pedir por uma mensagem descrevendo a mudança, e, -então, gravar a nova versão do projeto. +Ao executar esse comando, ele irá te pedir uma mensagem descrevendo a mudança, +e, então, irá gravar a nova versão do projeto. Alternativamente, ao invés de executar 'git-add' antes, você pode usar @@ -143,7 +143,7 @@ idéia começar a mensagem com uma simples e curta (menos de 50 caracteres) linha sumarizando a mudança, seguida de uma linha em branco e, então, uma descrição mais detalhada. Ferramentas que transformam commits em email, por exemplo, usam a primeira linha no campo de -cabeçalho Subject: e o resto no corpo. +cabeçalho "Subject:" e o resto no corpo. Git rastreia conteúdo, não arquivos ---------------------------- @@ -155,7 +155,7 @@ usado tanto para arquivos novos e arquivos recentemente modificados, e em ambos os casos, ele tira o instantâneo dos arquivos dados e armazena o conteúdo no Ãndice, pronto para inclusão do próximo commit. -Visualizando história do projeto +Visualizando a história do projeto ----------------------- Em qualquer ponto você pode visualizar a história das suas mudanças @@ -165,7 +165,7 @@ usando $ git log ------------------------------------------------ -Se você também quer ver a diferença completa a cada passo, use +Se você também quiser ver a diferença completa a cada passo, use ------------------------------------------------ $ git log -p diff --git a/Documentation/pull-fetch-param.txt b/Documentation/pull-fetch-param.txt index f9811f2473..0551ebdfaf 100644 --- a/Documentation/pull-fetch-param.txt +++ b/Documentation/pull-fetch-param.txt @@ -4,6 +4,13 @@ (see the section <<URLS,GIT URLS>> below) or the name of a remote (see the section <<REMOTES,REMOTES>> below). +ifndef::git-pull[] +<group>:: + A name referring to a list of repositories as the value + of remotes.<group> in the configuration file. + (See linkgit:git-config[1]). +endif::git-pull[] + <refspec>:: The format of a <refspec> parameter is an optional plus `{plus}`, followed by the source ref <src>, followed @@ -11,9 +18,9 @@ + The remote ref that matches <src> is fetched, and if <dst> is not empty string, the local -ref that matches it is fast forwarded using <src>. +ref that matches it is fast-forwarded using <src>. If the optional plus `+` is used, the local ref -is updated even if it does not result in a fast forward +is updated even if it does not result in a fast-forward update. + [NOTE] diff --git a/Documentation/rev-list-options.txt b/Documentation/rev-list-options.txt index bf66116d61..1f57aed337 100644 --- a/Documentation/rev-list-options.txt +++ b/Documentation/rev-list-options.txt @@ -243,12 +243,23 @@ endif::git-rev-list[] Pretend as if all the refs in `$GIT_DIR/refs/remotes` are listed on the command line as '<commit>'. -ifdef::git-rev-list[] +ifndef::git-rev-list[] +--bisect:: + + Pretend as if the bad bisection ref `$GIT_DIR/refs/bisect/bad` + was listed and as if it was followed by `--not` and the good + bisection refs `$GIT_DIR/refs/bisect/good-*` on the command + line. +endif::git-rev-list[] + --stdin:: In addition to the '<commit>' listed on the command - line, read them from the standard input. + line, read them from the standard input. If a '--' separator is + seen, stop reading commits and start reading paths to limit the + result. +ifdef::git-rev-list[] --quiet:: Don't print anything to standard output. This form @@ -536,7 +547,11 @@ Bisection Helpers --bisect:: Limit output to the one commit object which is roughly halfway between -the included and excluded commits. Thus, if +included and excluded commits. Note that the bad bisection ref +`$GIT_DIR/refs/bisect/bad` is added to the included commits (if it +exists) and the good bisection refs `$GIT_DIR/refs/bisect/good-*` are +added to the excluded commits (if they exist). Thus, supposing there +are no refs in `$GIT_DIR/refs/bisect/`, if ----------------------------------------------------------------------- $ git rev-list --bisect foo ^bar ^baz @@ -556,22 +571,24 @@ one. --bisect-vars:: -This calculates the same as `--bisect`, but outputs text ready -to be eval'ed by the shell. These lines will assign the name of -the midpoint revision to the variable `bisect_rev`, and the -expected number of commits to be tested after `bisect_rev` is -tested to `bisect_nr`, the expected number of commits to be -tested if `bisect_rev` turns out to be good to `bisect_good`, -the expected number of commits to be tested if `bisect_rev` -turns out to be bad to `bisect_bad`, and the number of commits -we are bisecting right now to `bisect_all`. +This calculates the same as `--bisect`, except that refs in +`$GIT_DIR/refs/bisect/` are not used, and except that this outputs +text ready to be eval'ed by the shell. These lines will assign the +name of the midpoint revision to the variable `bisect_rev`, and the +expected number of commits to be tested after `bisect_rev` is tested +to `bisect_nr`, the expected number of commits to be tested if +`bisect_rev` turns out to be good to `bisect_good`, the expected +number of commits to be tested if `bisect_rev` turns out to be bad to +`bisect_bad`, and the number of commits we are bisecting right now to +`bisect_all`. --bisect-all:: This outputs all the commit objects between the included and excluded commits, ordered by their distance to the included and excluded -commits. The farthest from them is displayed first. (This is the only -one displayed by `--bisect`.) +commits. Refs in `$GIT_DIR/refs/bisect/` are not used. The farthest +from them is displayed first. (This is the only one displayed by +`--bisect`.) + This is useful because it makes it easy to choose a good commit to test when you want to avoid to test some of them for some reason (they diff --git a/Documentation/technical/api-history-graph.txt b/Documentation/technical/api-history-graph.txt index d66e61b1ec..d6fc90ac7e 100644 --- a/Documentation/technical/api-history-graph.txt +++ b/Documentation/technical/api-history-graph.txt @@ -11,9 +11,6 @@ Core functions: * `graph_init()` creates a new `struct git_graph` -* `graph_release()` destroys a `struct git_graph`, and frees the memory - associated with it. - * `graph_update()` moves the graph to a new commit. * `graph_next_line()` outputs the next line of the graph into a strbuf. It @@ -134,8 +131,6 @@ while ((commit = get_revision(opts)) != NULL) { putchar(opts->diffopt.line_termination); } } - -graph_release(graph); ------------ Sample output diff --git a/Documentation/technical/pack-protocol.txt b/Documentation/technical/pack-protocol.txt index 9cd48b4859..7950eeeda4 100644 --- a/Documentation/technical/pack-protocol.txt +++ b/Documentation/technical/pack-protocol.txt @@ -1,41 +1,494 @@ -Pack transfer protocols -======================= - -There are two Pack push-pull protocols. - -upload-pack (S) | fetch/clone-pack (C) protocol: - - # Tell the puller what commits we have and what their names are - S: SHA1 name - S: ... - S: SHA1 name - S: # flush -- it's your turn - # Tell the pusher what commits we want, and what we have - C: want name - C: .. - C: want name - C: have SHA1 - C: have SHA1 - C: ... - C: # flush -- occasionally ask "had enough?" - S: NAK - C: have SHA1 - C: ... - C: have SHA1 - S: ACK - C: done - S: XXXXXXX -- packfile contents. - -send-pack | receive-pack protocol. - - # Tell the pusher what commits we have and what their names are - C: SHA1 name - C: ... - C: SHA1 name - C: # flush -- it's your turn - # Tell the puller what the pusher has - S: old-SHA1 new-SHA1 name - S: old-SHA1 new-SHA1 name - S: ... - S: # flush -- done with the list - S: XXXXXXX --- packfile contents. +Packfile transfer protocols +=========================== + +Git supports transferring data in packfiles over the ssh://, git:// and +file:// transports. There exist two sets of protocols, one for pushing +data from a client to a server and another for fetching data from a +server to a client. All three transports (ssh, git, file) use the same +protocol to transfer data. + +The processes invoked in the canonical Git implementation are 'upload-pack' +on the server side and 'fetch-pack' on the client side for fetching data; +then 'receive-pack' on the server and 'send-pack' on the client for pushing +data. The protocol functions to have a server tell a client what is +currently on the server, then for the two to negotiate the smallest amount +of data to send in order to fully update one or the other. + +Transports +---------- +There are three transports over which the packfile protocol is +initiated. The Git transport is a simple, unauthenticated server that +takes the command (almost always 'upload-pack', though Git +servers can be configured to be globally writable, in which 'receive- +pack' initiation is also allowed) with which the client wishes to +communicate and executes it and connects it to the requesting +process. + +In the SSH transport, the client just runs the 'upload-pack' +or 'receive-pack' process on the server over the SSH protocol and then +communicates with that invoked process over the SSH connection. + +The file:// transport runs the 'upload-pack' or 'receive-pack' +process locally and communicates with it over a pipe. + +Git Transport +------------- + +The Git transport starts off by sending the command and repository +on the wire using the pkt-line format, followed by a NUL byte and a +hostname paramater, terminated by a NUL byte. + + 0032git-upload-pack /project.git\0host=myserver.com\0 + +-- + git-proto-request = request-command SP pathname NUL [ host-parameter NUL ] + request-command = "git-upload-pack" / "git-receive-pack" / + "git-upload-archive" ; case sensitive + pathname = *( %x01-ff ) ; exclude NUL + host-parameter = "host=" hostname [ ":" port ] +-- + +Only host-parameter is allowed in the git-proto-request. Clients +MUST NOT attempt to send additional parameters. It is used for the +git-daemon name based virtual hosting. See --interpolated-path +option to git daemon, with the %H/%CH format characters. + +Basically what the Git client is doing to connect to an 'upload-pack' +process on the server side over the Git protocol is this: + + $ echo -e -n \ + "0039git-upload-pack /schacon/gitbook.git\0host=example.com\0" | + nc -v example.com 9418 + + +SSH Transport +------------- + +Initiating the upload-pack or receive-pack processes over SSH is +executing the binary on the server via SSH remote execution. +It is basically equivalent to running this: + + $ ssh git.example.com "git-upload-pack '/project.git'" + +For a server to support Git pushing and pulling for a given user over +SSH, that user needs to be able to execute one or both of those +commands via the SSH shell that they are provided on login. On some +systems, that shell access is limited to only being able to run those +two commands, or even just one of them. + +In an ssh:// format URI, it's absolute in the URI, so the '/' after +the host name (or port number) is sent as an argument, which is then +read by the remote git-upload-pack exactly as is, so it's effectively +an absolute path in the remote filesystem. + + git clone ssh://user@example.com/project.git + | + v + ssh user@example.com "git-upload-pack '/project.git'" + +In a "user@host:path" format URI, its relative to the user's home +directory, because the Git client will run: + + git clone user@example.com:project.git + | + v + ssh user@example.com "git-upload-pack 'project.git'" + +The exception is if a '~' is used, in which case +we execute it without the leading '/'. + + ssh://user@example.com/~alice/project.git, + | + v + ssh user@example.com "git-upload-pack '~alice/project.git'" + +A few things to remember here: + +- The "command name" is spelled with dash (e.g. git-upload-pack), but + this can be overridden by the client; + +- The repository path is always quoted with single quotes. + +Fetching Data From a Server +=========================== + +When one Git repository wants to get data that a second repository +has, the first can 'fetch' from the second. This operation determines +what data the server has that the client does not then streams that +data down to the client in packfile format. + + +Reference Discovery +------------------- + +When the client initially connects the server will immediately respond +with a listing of each reference it has (all branches and tags) along +with the object name that each reference currently points to. + + $ echo -e -n "0039git-upload-pack /schacon/gitbook.git\0host=example.com\0" | + nc -v example.com 9418 + 00887217a7c7e582c46cec22a130adf4b9d7d950fba0 HEAD\0multi_ack thin-pack side-band side-band-64k ofs-delta shallow no-progress include-tag + 00441d3fcd5ced445d1abc402225c0b8a1299641f497 refs/heads/integration + 003f7217a7c7e582c46cec22a130adf4b9d7d950fba0 refs/heads/master + 003cb88d2441cac0977faf98efc80305012112238d9d refs/tags/v0.9 + 003c525128480b96c89e6418b1e40909bf6c5b2d580f refs/tags/v1.0 + 003fe92df48743b7bc7d26bcaabfddde0a1e20cae47c refs/tags/v1.0^{} + 0000 + +Server SHOULD terminate each non-flush line using LF ("\n") terminator; +client MUST NOT complain if there is no terminator. + +The returned response is a pkt-line stream describing each ref and +its current value. The stream MUST be sorted by name according to +the C locale ordering. + +If HEAD is a valid ref, HEAD MUST appear as the first advertised +ref. If HEAD is not a valid ref, HEAD MUST NOT appear in the +advertisement list at all, but other refs may still appear. + +The stream MUST include capability declarations behind a NUL on the +first ref. The peeled value of a ref (that is "ref^{}") MUST be +immediately after the ref itself, if presented. A conforming server +MUST peel the ref if its an annotated tag. + +---- + advertised-refs = (no-refs / list-of-refs) + flush-pkt + + no-refs = PKT-LINE(zero-id SP "capabilities^{}" + NUL capability-list LF) + + list-of-refs = first-ref *other-ref + first-ref = PKT-LINE(obj-id SP refname + NUL capability-list LF) + + other-ref = PKT-LINE(other-tip / other-peeled) + other-tip = obj-id SP refname LF + other-peeled = obj-id SP refname "^{}" LF + + capability-list = capability *(SP capability) + capability = 1*(LC_ALPHA / DIGIT / "-" / "_") + LC_ALPHA = %x61-7A +---- + +Server and client MUST use lowercase for obj-id, both MUST treat obj-id +as case-insensitive. + +See protocol-capabilities.txt for a list of allowed server capabilities +and descriptions. + +Packfile Negotiation +-------------------- +After reference and capabilities discovery, the client can decide +to terminate the connection by sending a flush-pkt, telling the +server it can now gracefully terminate (as happens with the ls-remote +command) or it can enter the negotiation phase, where the client and +server determine what the minimal packfile necessary for transport is. + +Once the client has the initial list of references that the server +has, as well as the list of capabilities, it will begin telling the +server what objects it wants and what objects it has, so the server +can make a packfile that only contains the objects that the client needs. +The client will also send a list of the capabilities it wants to be in +effect, out of what the server said it could do with the first 'want' line. + +---- + upload-request = want-list + have-list + compute-end + + want-list = first-want + *additional-want + flush-pkt + + first-want = PKT-LINE("want" SP obj-id SP capability-list LF) + additional-want = PKT-LINE("want" SP obj-id LF) + + have-list = *have-line + have-line = PKT-LINE("have" SP obj-id LF) + compute-end = flush-pkt / PKT-LINE("done") +---- + +Clients MUST send all the obj-ids it wants from the reference +discovery phase as 'want' lines. Clients MUST send at least one +'want' command in the request body. Clients MUST NOT mention an +obj-id in a 'want' command which did not appear in the response +obtained through ref discovery. + +If client is requesting a shallow clone, it will now send a 'deepen' +line with the depth it is requesting. + +Once all the "want"s (and optional 'deepen') are transferred, +clients MUST send a flush-pkt. If the client has all the references +on the server, client flushes and disconnects. + +TODO: shallow/unshallow response and document the deepen command in the ABNF. + +Now the client will send a list of the obj-ids it has using 'have' +lines. In multi_ack mode, the canonical implementation will send up +to 32 of these at a time, then will send a flush-pkt. The canonical +implementation will skip ahead and send the next 32 immediately, +so that there is always a block of 32 "in-flight on the wire" at a +time. + +If the server reads 'have' lines, it then will respond by ACKing any +of the obj-ids the client said it had that the server also has. The +server will ACK obj-ids differently depending on which ack mode is +chosen by the client. + +In multi_ack mode: + + * the server will respond with 'ACK obj-id continue' for any common + commits. + + * once the server has found an acceptable common base commit and is + ready to make a packfile, it will blindly ACK all 'have' obj-ids + back to the client. + + * the server will then send a 'NACK' and then wait for another response + from the client - either a 'done' or another list of 'have' lines. + +In multi_ack_detailed mode: + + * the server will differentiate the ACKs where it is signaling + that it is ready to send data with 'ACK obj-id ready' lines, and + signals the identified common commits with 'ACK obj-id common' lines. + +Without either multi_ack or multi_ack_detailed: + + * upload-pack sends "ACK obj-id" on the first common object it finds. + After that it says nothing until the client gives it a "done". + + * upload-pack sends "NAK" on a flush-pkt if no common object + has been found yet. If one has been found, and thus an ACK + was already sent, its silent on the flush-pkt. + +After the client has gotten enough ACK responses that it can determine +that the server has enough information to send an efficient packfile +(in the canonical implementation, this is determined when it has received +enough ACKs that it can color everything left in the --date-order queue +as common with the server, or the --date-order queue is empty), or the +client determines that it wants to give up (in the canonical implementation, +this is determined when the client sends 256 'have' lines without getting +any of them ACKed by the server - meaning there is nothing in common and +the server should just send all it's objects), then the client will send +a 'done' command. The 'done' command signals to the server that the client +is ready to receive it's packfile data. + +However, the 256 limit *only* turns on in the canonical client +implementation if we have received at least one "ACK %s continue" +during a prior round. This helps to ensure that at least one common +ancestor is found before we give up entirely. + +Once the 'done' line is read from the client, the server will either +send a final 'ACK obj-id' or it will send a 'NAK'. The server only sends +ACK after 'done' if there is at least one common base and multi_ack or +multi_ack_detailed is enabled. The server always sends NAK after 'done' +if there is no common base found. + +Then the server will start sending it's packfile data. + +---- + server-response = *ack_multi ack / nak + ack_multi = PKT-LINE("ACK" SP obj-id ack_status LF) + ack_status = "continue" / "common" / "ready" + ack = PKT-LINE("ACK SP obj-id LF) + nak = PKT-LINE("NAK" LF) +---- + +A simple clone may look like this (with no 'have' lines): + +---- + C: 0054want 74730d410fcb6603ace96f1dc55ea6196122532d\0multi_ack \ + side-band-64k ofs-delta\n + C: 0032want 7d1665144a3a975c05f1f43902ddaf084e784dbe\n + C: 0032want 5a3f6be755bbb7deae50065988cbfa1ffa9ab68a\n + C: 0032want 7e47fe2bd8d01d481f44d7af0531bd93d3b21c01\n + C: 0032want 74730d410fcb6603ace96f1dc55ea6196122532d\n + C: 0000 + C: 0009done\n + + S: 0008NAK\n + S: [PACKFILE] +---- + +An incremental update (fetch) response might look like this: + +---- + C: 0054want 74730d410fcb6603ace96f1dc55ea6196122532d\0multi_ack \ + side-band-64k ofs-delta\n + C: 0032want 7d1665144a3a975c05f1f43902ddaf084e784dbe\n + C: 0032want 5a3f6be755bbb7deae50065988cbfa1ffa9ab68a\n + C: 0000 + C: 0032have 7e47fe2bd8d01d481f44d7af0531bd93d3b21c01\n + C: [30 more have lines] + C: 0032have 74730d410fcb6603ace96f1dc55ea6196122532d\n + C: 0000 + + S: 003aACK 7e47fe2bd8d01d481f44d7af0531bd93d3b21c01 continue\n + S: 003aACK 74730d410fcb6603ace96f1dc55ea6196122532d continue\n + S: 0008NAK\n + + C: 0009done\n + + S: 003aACK 74730d410fcb6603ace96f1dc55ea6196122532d\n + S: [PACKFILE] +---- + + +Packfile Data +------------- + +Now that the client and server have finished negotiation about what +the minimal amount of data that needs to be sent to the client is, the server +will construct and send the required data in packfile format. + +See pack-format.txt for what the packfile itself actually looks like. + +If 'side-band' or 'side-band-64k' capabilities have been specified by +the client, the server will send the packfile data multiplexed. + +Each packet starting with the packet-line length of the amount of data +that follows, followed by a single byte specifying the sideband the +following data is coming in on. + +In 'side-band' mode, it will send up to 999 data bytes plus 1 control +code, for a total of up to 1000 bytes in a pkt-line. In 'side-band-64k' +mode it will send up to 65519 data bytes plus 1 control code, for a +total of up to 65520 bytes in a pkt-line. + +The sideband byte will be a '1', '2' or a '3'. Sideband '1' will contain +packfile data, sideband '2' will be used for progress information that the +client will generally print to stderr and sideband '3' is used for error +information. + +If no 'side-band' capability was specified, the server will stream the +entire packfile without multiplexing. + + +Pushing Data To a Server +======================== + +Pushing data to a server will invoke the 'receive-pack' process on the +server, which will allow the client to tell it which references it should +update and then send all the data the server will need for those new +references to be complete. Once all the data is received and validated, +the server will then update its references to what the client specified. + +Authentication +-------------- + +The protocol itself contains no authentication mechanisms. That is to be +handled by the transport, such as SSH, before the 'receive-pack' process is +invoked. If 'receive-pack' is configured over the Git transport, those +repositories will be writable by anyone who can access that port (9418) as +that transport is unauthenticated. + +Reference Discovery +------------------- + +The reference discovery phase is done nearly the same way as it is in the +fetching protocol. Each reference obj-id and name on the server is sent +in packet-line format to the client, followed by a flush-pkt. The only +real difference is that the capability listing is different - the only +possible values are 'report-status', 'delete-refs' and 'ofs-delta'. + +Reference Update Request and Packfile Transfer +---------------------------------------------- + +Once the client knows what references the server is at, it can send a +list of reference update requests. For each reference on the server +that it wants to update, it sends a line listing the obj-id currently on +the server, the obj-id the client would like to update it to and the name +of the reference. + +This list is followed by a flush-pkt and then the packfile that should +contain all the objects that the server will need to complete the new +references. + +---- + update-request = command-list [pack-file] + + command-list = PKT-LINE(command NUL capability-list LF) + *PKT-LINE(command LF) + flush-pkt + + command = create / delete / update + create = zero-id SP new-id SP name + delete = old-id SP zero-id SP name + update = old-id SP new-id SP name + + old-id = obj-id + new-id = obj-id + + pack-file = "PACK" 28*(OCTET) +---- + +If the receiving end does not support delete-refs, the sending end MUST +NOT ask for delete command. + +The pack-file MUST NOT be sent if the only command used is 'delete'. + +A pack-file MUST be sent if either create or update command is used, +even if the server already has all the necessary objects. In this +case the client MUST send an empty pack-file. The only time this +is likely to happen is if the client is creating +a new branch or a tag that points to an existing obj-id. + +The server will receive the packfile, unpack it, then validate each +reference that is being updated that it hasn't changed while the request +was being processed (the obj-id is still the same as the old-id), and +it will run any update hooks to make sure that the update is acceptable. +If all of that is fine, the server will then update the references. + +Report Status +------------- + +After receiving the pack data from the sender, the receiver sends a +report if 'report-status' capability is in effect. +It is a short listing of what happened in that update. It will first +list the status of the packfile unpacking as either 'unpack ok' or +'unpack [error]'. Then it will list the status for each of the references +that it tried to update. Each line is either 'ok [refname]' if the +update was successful, or 'ng [refname] [error]' if the update was not. + +---- + report-status = unpack-status + 1*(command-status) + flush-pkt + + unpack-status = PKT-LINE("unpack" SP unpack-result LF) + unpack-result = "ok" / error-msg + + command-status = command-ok / command-fail + command-ok = PKT-LINE("ok" SP refname LF) + command-fail = PKT-LINE("ng" SP refname SP error-msg LF) + + error-msg = 1*(OCTECT) ; where not "ok" +---- + +Updates can be unsuccessful for a number of reasons. The reference can have +changed since the reference discovery phase was originally sent, meaning +someone pushed in the meantime. The reference being pushed could be a +non-fast-forward reference and the update hooks or configuration could be +set to not allow that, etc. Also, some references can be updated while others +can be rejected. + +An example client/server communication might look like this: + +---- + S: 007c74730d410fcb6603ace96f1dc55ea6196122532d refs/heads/local\0report-status delete-refs ofs-delta\n + S: 003e7d1665144a3a975c05f1f43902ddaf084e784dbe refs/heads/debug\n + S: 003f74730d410fcb6603ace96f1dc55ea6196122532d refs/heads/master\n + S: 003f74730d410fcb6603ace96f1dc55ea6196122532d refs/heads/team\n + S: 0000 + + C: 003e7d1665144a3a975c05f1f43902ddaf084e784dbe 74730d410fcb6603ace96f1dc55ea6196122532d refs/heads/debug\n + C: 003e74730d410fcb6603ace96f1dc55ea6196122532d 5a3f6be755bbb7deae50065988cbfa1ffa9ab68a refs/heads/master\n + C: 0000 + C: [PACKDATA] + + S: 000aunpack ok\n + S: 0014ok refs/heads/debug\n + S: 0026ng refs/heads/master non-fast-forward\n +---- diff --git a/Documentation/technical/protocol-capabilities.txt b/Documentation/technical/protocol-capabilities.txt new file mode 100644 index 0000000000..1892d3eeac --- /dev/null +++ b/Documentation/technical/protocol-capabilities.txt @@ -0,0 +1,187 @@ +Git Protocol Capabilities +========================= + +Servers SHOULD support all capabilities defined in this document. + +On the very first line of the initial server response of either +receive-pack and upload-pack the first reference is followed by +a NUL byte and then a list of space delimited server capabilities. +These allow the server to declare what it can and cannot support +to the client. + +Client will then send a space separated list of capabilities it wants +to be in effect. The client MUST NOT ask for capabilities the server +did not say it supports. + +Server MUST diagnose and abort if capabilities it does not understand +was sent. Server MUST NOT ignore capabilities that client requested +and server advertised. As a consequence of these rules, server MUST +NOT advertise capabilities it does not understand. + +The 'report-status' and 'delete-refs' capabilities are sent and +recognized by the receive-pack (push to server) process. + +The 'ofs-delta' capability is sent and recognized by both upload-pack +and receive-pack protocols. + +All other capabilities are only recognized by the upload-pack (fetch +from server) process. + +multi_ack +--------- + +The 'multi_ack' capability allows the server to return "ACK obj-id +continue" as soon as it finds a commit that it can use as a common +base, between the client's wants and the client's have set. + +By sending this early, the server can potentially head off the client +from walking any further down that particular branch of the client's +repository history. The client may still need to walk down other +branches, sending have lines for those, until the server has a +complete cut across the DAG, or the client has said "done". + +Without multi_ack, a client sends have lines in --date-order until +the server has found a common base. That means the client will send +have lines that are already known by the server to be common, because +they overlap in time with another branch that the server hasn't found +a common base on yet. + +For example suppose the client has commits in caps that the server +doesn't and the server has commits in lower case that the client +doesn't, as in the following diagram: + + +---- u ---------------------- x + / +----- y + / / + a -- b -- c -- d -- E -- F + \ + +--- Q -- R -- S + +If the client wants x,y and starts out by saying have F,S, the server +doesn't know what F,S is. Eventually the client says "have d" and +the server sends "ACK d continue" to let the client know to stop +walking down that line (so don't send c-b-a), but its not done yet, +it needs a base for x. The client keeps going with S-R-Q, until a +gets reached, at which point the server has a clear base and it all +ends. + +Without multi_ack the client would have sent that c-b-a chain anyway, +interleaved with S-R-Q. + +thin-pack +--------- + +This capability means that the server can send a 'thin' pack, a pack +which does not contain base objects; if those base objects are available +on client side. Client requests 'thin-pack' capability when it +understands how to "thicken" it by adding required delta bases making +it self-contained. + +Client MUST NOT request 'thin-pack' capability if it cannot turn a thin +pack into a self-contained pack. + + +side-band, side-band-64k +------------------------ + +This capability means that server can send, and client understand multiplexed +progress reports and error info interleaved with the packfile itself. + +These two options are mutually exclusive. A modern client always +favors 'side-band-64k'. + +Either mode indicates that the packfile data will be streamed broken +up into packets of up to either 1000 bytes in the case of 'side_band', +or 65520 bytes in the case of 'side_band_64k'. Each packet is made up +of a leading 4-byte pkt-line length of how much data is in the packet, +followed by a 1-byte stream code, followed by the actual data. + +The stream code can be one of: + + 1 - pack data + 2 - progress messages + 3 - fatal error message just before stream aborts + +The "side-band-64k" capability came about as a way for newer clients +that can handle much larger packets to request packets that are +actually crammed nearly full, while maintaining backward compatibility +for the older clients. + +Further, with side-band and its up to 1000-byte messages, it's actually +999 bytes of payload and 1 byte for the stream code. With side-band-64k, +same deal, you have up to 65519 bytes of data and 1 byte for the stream +code. + +The client MUST send only maximum of one of "side-band" and "side- +band-64k". Server MUST diagnose it as an error if client requests +both. + +ofs-delta +--------- + +Server can send, and client understand PACKv2 with delta refering to +its base by position in pack rather than by an obj-id. That is, they can +send/read OBJ_OFS_DELTA (aka type 6) in a packfile. + +shallow +------- + +This capability adds "deepen", "shallow" and "unshallow" commands to +the fetch-pack/upload-pack protocol so clients can request shallow +clones. + +no-progress +----------- + +The client was started with "git clone -q" or something, and doesn't +want that side band 2. Basically the client just says "I do not +wish to receive stream 2 on sideband, so do not send it to me, and if +you did, I will drop it on the floor anyway". However, the sideband +channel 3 is still used for error responses. + +include-tag +----------- + +The 'include-tag' capability is about sending annotated tags if we are +sending objects they point to. If we pack an object to the client, and +a tag object points exactly at that object, we pack the tag object too. +In general this allows a client to get all new annotated tags when it +fetches a branch, in a single network connection. + +Clients MAY always send include-tag, hardcoding it into a request when +the server advertises this capability. The decision for a client to +request include-tag only has to do with the client's desires for tag +data, whether or not a server had advertised objects in the +refs/tags/* namespace. + +Servers MUST pack the tags if their referrant is packed and the client +has requested include-tags. + +Clients MUST be prepared for the case where a server has ignored +include-tag and has not actually sent tags in the pack. In such +cases the client SHOULD issue a subsequent fetch to acquire the tags +that include-tag would have otherwise given the client. + +The server SHOULD send include-tag, if it supports it, regardless +of whether or not there are tags available. + +report-status +------------- + +The upload-pack process can receive a 'report-status' capability, +which tells it that the client wants a report of what happened after +a packfile upload and reference update. If the pushing client requests +this capability, after unpacking and updating references the server +will respond with whether the packfile unpacked successfully and if +each reference was updated successfully. If any of those were not +successful, it will send back an error message. See pack-protocol.txt +for example messages. + +delete-refs +----------- + +If the server sends back the 'delete-refs' capability, it means that +it is capable of accepting an zero-id value as the target +value of a reference update. It is not sent back by the client, it +simply informs the client that it can be sent zero-id values +to delete references. diff --git a/Documentation/technical/protocol-common.txt b/Documentation/technical/protocol-common.txt new file mode 100644 index 0000000000..d30a1b9510 --- /dev/null +++ b/Documentation/technical/protocol-common.txt @@ -0,0 +1,96 @@ +Documentation Common to Pack and Http Protocols +=============================================== + +ABNF Notation +------------- + +ABNF notation as described by RFC 5234 is used within the protocol documents, +except the following replacement core rules are used: +---- + HEXDIG = DIGIT / "a" / "b" / "c" / "d" / "e" / "f" +---- + +We also define the following common rules: +---- + NUL = %x00 + zero-id = 40*"0" + obj-id = 40*(HEXDIGIT) + + refname = "HEAD" + refname /= "refs/" <see discussion below> +---- + +A refname is a hierarchical octet string beginning with "refs/" and +not violating the 'git-check-ref-format' command's validation rules. +More specifically, they: + +. They can include slash `/` for hierarchical (directory) + grouping, but no slash-separated component can begin with a + dot `.`. + +. They must contain at least one `/`. This enforces the presence of a + category like `heads/`, `tags/` etc. but the actual names are not + restricted. + +. They cannot have two consecutive dots `..` anywhere. + +. They cannot have ASCII control characters (i.e. bytes whose + values are lower than \040, or \177 `DEL`), space, tilde `~`, + caret `{caret}`, colon `:`, question-mark `?`, asterisk `*`, + or open bracket `[` anywhere. + +. They cannot end with a slash `/` nor a dot `.`. + +. They cannot end with the sequence `.lock`. + +. They cannot contain a sequence `@{`. + +. They cannot contain a `\\`. + + +pkt-line Format +--------------- + +Much (but not all) of the payload is described around pkt-lines. + +A pkt-line is a variable length binary string. The first four bytes +of the line, the pkt-len, indicates the total length of the line, +in hexadecimal. The pkt-len includes the 4 bytes used to contain +the length's hexadecimal representation. + +A pkt-line MAY contain binary data, so implementors MUST ensure +pkt-line parsing/formatting routines are 8-bit clean. + +A non-binary line SHOULD BE terminated by an LF, which if present +MUST be included in the total length. + +The maximum length of a pkt-line's data component is 65520 bytes. +Implementations MUST NOT send pkt-line whose length exceeds 65524 +(65520 bytes of payload + 4 bytes of length data). + +Implementations SHOULD NOT send an empty pkt-line ("0004"). + +A pkt-line with a length field of 0 ("0000"), called a flush-pkt, +is a special case and MUST be handled differently than an empty +pkt-line ("0004"). + +---- + pkt-line = data-pkt / flush-pkt + + data-pkt = pkt-len pkt-payload + pkt-len = 4*(HEXDIG) + pkt-payload = (pkt-len - 4)*(OCTET) + + flush-pkt = "0000" +---- + +Examples (as C-style strings): + +---- + pkt-line actual value + --------------------------------- + "0006a\n" "a\n" + "0005a" "a" + "000bfoobar\n" "foobar\n" + "0004" "" +---- diff --git a/Documentation/user-manual.txt b/Documentation/user-manual.txt index 67ebffa568..b169836684 100644 --- a/Documentation/user-manual.txt +++ b/Documentation/user-manual.txt @@ -1183,7 +1183,23 @@ $ git merge branchname ------------------------------------------------- merges the development in the branch "branchname" into the current -branch. If there are conflicts--for example, if the same file is +branch. + +A merge is made by combining the changes made in "branchname" and the +changes made up to the latest commit in your current branch since +their histories forked. The work tree is overwritten by the result of +the merge when this combining is done cleanly, or overwritten by a +half-merged results when this combining results in conflicts. +Therefore, if you have uncommitted changes touching the same files as +the ones impacted by the merge, Git will refuse to proceed. Most of +the time, you will want to commit your changes before you can merge, +and if you don't, then linkgit:git-stash[1] can take these changes +away while you're doing the merge, and reapply them afterwards. + +If the changes are independant enough, Git will automatically complete +the merge and commit the result (or reuse an existing commit in case +of <<fast-forwards,fast-forward>>, see below). On the other hand, +if there are conflicts--for example, if the same file is modified in two different ways in the remote branch and the local branch--then you are warned; the output may look something like this: @@ -1384,7 +1400,7 @@ were merged. However, if the current branch is a descendant of the other--so every commit present in the one is already contained in the other--then git -just performs a "fast forward"; the head of the current branch is moved +just performs a "fast-forward"; the head of the current branch is moved forward to point at the head of the merged-in branch, without any new commits being created. @@ -1679,7 +1695,7 @@ Sharing development with others Getting updates with git pull ----------------------------- -After you clone a repository and make a few changes of your own, you +After you clone a repository and commit a few changes of your own, you may wish to check the original repository for updates and merge them into your own work. @@ -1719,7 +1735,7 @@ producing a default commit message documenting the branch and repository that you pulled from. (But note that no such commit will be created in the case of a -<<fast-forwards,fast forward>>; instead, your branch will just be +<<fast-forwards,fast-forward>>; instead, your branch will just be updated to point to the latest commit from the upstream branch.) The `git pull` command can also be given "." as the "remote" repository, @@ -1943,7 +1959,7 @@ $ git push ssh://yourserver.com/~you/proj.git master ------------------------------------------------- As with `git fetch`, `git push` will complain if this does not result in a -<<fast-forwards,fast forward>>; see the following section for details on +<<fast-forwards,fast-forward>>; see the following section for details on handling this case. Note that the target of a "push" is normally a @@ -1976,7 +1992,7 @@ details. What to do when a push fails ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -If a push would not result in a <<fast-forwards,fast forward>> of the +If a push would not result in a <<fast-forwards,fast-forward>> of the remote branch, then it will fail with an error like: ------------------------------------------------- @@ -2115,7 +2131,7 @@ $ git checkout release && git pull Important note! If you have any local changes in these branches, then this merge will create a commit object in the history (with no local -changes git will simply do a "Fast forward" merge). Many people dislike +changes git will simply do a "fast-forward" merge). Many people dislike the "noise" that this creates in the Linux history, so you should avoid doing this capriciously in the "release" branch, as these noisy commits will become part of the permanent history when you ask Linus to pull @@ -2569,7 +2585,7 @@ them again with linkgit:git-am[1]. Other tools ----------- -There are numerous other tools, such as StGIT, which exist for the +There are numerous other tools, such as StGit, which exist for the purpose of maintaining a patch series. These are outside of the scope of this manual. @@ -2729,9 +2745,9 @@ In the previous example, when updating an existing branch, "git fetch" checks to make sure that the most recent commit on the remote branch is a descendant of the most recent commit on your copy of the branch before updating your copy of the branch to point at the new -commit. Git calls this process a <<fast-forwards,fast forward>>. +commit. Git calls this process a <<fast-forwards,fast-forward>>. -A fast forward looks something like this: +A fast-forward looks something like this: ................................................ o--o--o--o <-- old head of the branch @@ -4275,7 +4291,7 @@ You see, Git is actually the best tool to find out about the source of Git itself! [[glossary]] -GIT Glossary +Git Glossary ============ include::glossary-content.txt[] |