diff options
Diffstat (limited to 'Documentation')
| -rw-r--r-- | Documentation/CodingGuidelines | 3 | ||||
| -rw-r--r-- | Documentation/Makefile | 63 | ||||
| -rw-r--r-- | Documentation/MyFirstObjectWalk.txt | 44 | ||||
| -rw-r--r-- | Documentation/RelNotes/2.36.0.txt | 106 | ||||
| -rw-r--r-- | Documentation/config.txt | 2 | ||||
| -rw-r--r-- | Documentation/config/advice.txt | 3 | ||||
| -rw-r--r-- | Documentation/config/sparse.txt | 27 | ||||
| -rw-r--r-- | Documentation/git-bundle.txt | 7 | ||||
| -rw-r--r-- | Documentation/git-cat-file.txt | 42 | ||||
| -rw-r--r-- | Documentation/git-help.txt | 15 | ||||
| -rw-r--r-- | Documentation/git-index-pack.txt | 8 | ||||
| -rw-r--r-- | Documentation/git-ls-files.txt | 2 | ||||
| -rw-r--r-- | Documentation/git-read-tree.txt | 16 | ||||
| -rw-r--r-- | Documentation/git-remote.txt | 2 | ||||
| -rw-r--r-- | Documentation/git-sparse-checkout.txt | 76 | ||||
| -rw-r--r-- | Documentation/git-update-index.txt | 57 | ||||
| -rw-r--r-- | Documentation/git-worktree.txt | 268 | ||||
| -rw-r--r-- | Documentation/technical/bundle-format.txt | 11 | ||||
| -rw-r--r-- | Documentation/technical/commit-graph-format.txt | 12 | ||||
| -rw-r--r-- | Documentation/technical/reftable.txt | 2 |
20 files changed, 479 insertions, 287 deletions
diff --git a/Documentation/CodingGuidelines b/Documentation/CodingGuidelines index c37c43186e..1a7bc4591c 100644 --- a/Documentation/CodingGuidelines +++ b/Documentation/CodingGuidelines @@ -217,6 +217,9 @@ For C programs: . since mid 2017 with 512f41cf, we have been using designated initializers for array (e.g. "int array[10] = { [5] = 2 }"). + . since early 2021 with 765dc168882, we have been using variadic + macros, mostly for printf-like trace and debug macros. + These used to be forbidden, but we have not heard any breakage report, and they are assumed to be safe. diff --git a/Documentation/Makefile b/Documentation/Makefile index ed656db2ae..1eb9192dae 100644 --- a/Documentation/Makefile +++ b/Documentation/Makefile @@ -1,3 +1,6 @@ +# Import tree-wide shared Makefile behavior and libraries +include ../shared.mak + # Guard against environment variables MAN1_TXT = MAN5_TXT = @@ -215,38 +218,6 @@ DEFAULT_EDITOR_SQ = $(subst ','\'',$(DEFAULT_EDITOR)) ASCIIDOC_EXTRA += -a 'git-default-editor=$(DEFAULT_EDITOR_SQ)' endif -QUIET_SUBDIR0 = +$(MAKE) -C # space to separate -C and subdir -QUIET_SUBDIR1 = - -ifneq ($(findstring $(MAKEFLAGS),w),w) -PRINT_DIR = --no-print-directory -else # "make -w" -NO_SUBDIR = : -endif - -ifneq ($(findstring $(MAKEFLAGS),s),s) -ifndef V - QUIET = @ - QUIET_ASCIIDOC = @echo ' ' ASCIIDOC $@; - QUIET_XMLTO = @echo ' ' XMLTO $@; - QUIET_DB2TEXI = @echo ' ' DB2TEXI $@; - QUIET_MAKEINFO = @echo ' ' MAKEINFO $@; - QUIET_DBLATEX = @echo ' ' DBLATEX $@; - QUIET_XSLTPROC = @echo ' ' XSLTPROC $@; - QUIET_GEN = @echo ' ' GEN $@; - QUIET_STDERR = 2> /dev/null - QUIET_SUBDIR0 = +@subdir= - QUIET_SUBDIR1 = ;$(NO_SUBDIR) echo ' ' SUBDIR $$subdir; \ - $(MAKE) $(PRINT_DIR) -C $$subdir - - QUIET_LINT_GITLINK = @echo ' ' LINT GITLINK $<; - QUIET_LINT_MANSEC = @echo ' ' LINT MAN SEC $<; - QUIET_LINT_MANEND = @echo ' ' LINT MAN END $<; - - export V -endif -endif - all: html man html: $(DOC_HTML) @@ -463,25 +434,11 @@ quick-install-html: require-htmlrepo print-man1: @for i in $(MAN1_TXT); do echo $$i; done -## Lint: Common -.build: - $(QUIET)mkdir $@ -.build/lint-docs: | .build - $(QUIET)mkdir $@ - ## Lint: gitlink -.build/lint-docs/gitlink: | .build/lint-docs - $(QUIET)mkdir $@ -.build/lint-docs/gitlink/howto: | .build/lint-docs/gitlink - $(QUIET)mkdir $@ -.build/lint-docs/gitlink/config: | .build/lint-docs/gitlink - $(QUIET)mkdir $@ LINT_DOCS_GITLINK = $(patsubst %.txt,.build/lint-docs/gitlink/%.ok,$(HOWTO_TXT) $(DOC_DEP_TXT)) -$(LINT_DOCS_GITLINK): | .build/lint-docs/gitlink -$(LINT_DOCS_GITLINK): | .build/lint-docs/gitlink/howto -$(LINT_DOCS_GITLINK): | .build/lint-docs/gitlink/config $(LINT_DOCS_GITLINK): lint-gitlink.perl $(LINT_DOCS_GITLINK): .build/lint-docs/gitlink/%.ok: %.txt + $(call mkdir_p_parent_template) $(QUIET_LINT_GITLINK)$(PERL_PATH) lint-gitlink.perl \ $< \ $(HOWTO_TXT) $(DOC_DEP_TXT) \ @@ -492,23 +449,18 @@ $(LINT_DOCS_GITLINK): .build/lint-docs/gitlink/%.ok: %.txt lint-docs-gitlink: $(LINT_DOCS_GITLINK) ## Lint: man-end-blurb -.build/lint-docs/man-end-blurb: | .build/lint-docs - $(QUIET)mkdir $@ LINT_DOCS_MAN_END_BLURB = $(patsubst %.txt,.build/lint-docs/man-end-blurb/%.ok,$(MAN_TXT)) -$(LINT_DOCS_MAN_END_BLURB): | .build/lint-docs/man-end-blurb $(LINT_DOCS_MAN_END_BLURB): lint-man-end-blurb.perl $(LINT_DOCS_MAN_END_BLURB): .build/lint-docs/man-end-blurb/%.ok: %.txt + $(call mkdir_p_parent_template) $(QUIET_LINT_MANEND)$(PERL_PATH) lint-man-end-blurb.perl $< >$@ .PHONY: lint-docs-man-end-blurb -lint-docs-man-end-blurb: $(LINT_DOCS_MAN_END_BLURB) ## Lint: man-section-order -.build/lint-docs/man-section-order: | .build/lint-docs - $(QUIET)mkdir $@ LINT_DOCS_MAN_SECTION_ORDER = $(patsubst %.txt,.build/lint-docs/man-section-order/%.ok,$(MAN_TXT)) -$(LINT_DOCS_MAN_SECTION_ORDER): | .build/lint-docs/man-section-order $(LINT_DOCS_MAN_SECTION_ORDER): lint-man-section-order.perl $(LINT_DOCS_MAN_SECTION_ORDER): .build/lint-docs/man-section-order/%.ok: %.txt + $(call mkdir_p_parent_template) $(QUIET_LINT_MANSEC)$(PERL_PATH) lint-man-section-order.perl $< >$@ .PHONY: lint-docs-man-section-order lint-docs-man-section-order: $(LINT_DOCS_MAN_SECTION_ORDER) @@ -524,7 +476,4 @@ doc-l10n install-l10n:: $(MAKE) -C po $@ endif -# Delete the target file on error -.DELETE_ON_ERROR: - .PHONY: FORCE diff --git a/Documentation/MyFirstObjectWalk.txt b/Documentation/MyFirstObjectWalk.txt index ca267941f3..8d9e85566e 100644 --- a/Documentation/MyFirstObjectWalk.txt +++ b/Documentation/MyFirstObjectWalk.txt @@ -522,24 +522,25 @@ function shows that the all-object walk is being performed by `traverse_commit_list()` or `traverse_commit_list_filtered()`. Those two functions reside in `list-objects.c`; examining the source shows that, despite the name, these functions traverse all kinds of objects. Let's have a look at -the arguments to `traverse_commit_list_filtered()`, which are a superset of the -arguments to the unfiltered version. +the arguments to `traverse_commit_list()`. -- `struct list_objects_filter_options *filter_options`: This is a struct which - stores a filter-spec as outlined in `Documentation/rev-list-options.txt`. -- `struct rev_info *revs`: This is the `rev_info` used for the walk. +- `struct rev_info *revs`: This is the `rev_info` used for the walk. If + its `filter` member is not `NULL`, then `filter` contains information for + how to filter the object list. - `show_commit_fn show_commit`: A callback which will be used to handle each individual commit object. - `show_object_fn show_object`: A callback which will be used to handle each non-commit object (so each blob, tree, or tag). - `void *show_data`: A context buffer which is passed in turn to `show_commit` and `show_object`. + +In addition, `traverse_commit_list_filtered()` has an additional paramter: + - `struct oidset *omitted`: A linked-list of object IDs which the provided filter caused to be omitted. -It looks like this `traverse_commit_list_filtered()` uses callbacks we provide -instead of needing us to call it repeatedly ourselves. Cool! Let's add the -callbacks first. +It looks like these methods use callbacks we provide instead of needing us +to call it repeatedly ourselves. Cool! Let's add the callbacks first. For the sake of this tutorial, we'll simply keep track of how many of each kind of object we find. At file scope in `builtin/walken.c` add the following @@ -712,20 +713,9 @@ help understand. In our case, that means we omit trees and blobs not directly referenced by `HEAD` or `HEAD`'s history, because we begin the walk with only `HEAD` in the `pending` list.) -First, we'll need to `#include "list-objects-filter-options.h"` and set up the -`struct list_objects_filter_options` at the top of the function. - ----- -static void walken_object_walk(struct rev_info *rev) -{ - struct list_objects_filter_options filter_options = { 0 }; - - ... ----- - For now, we are not going to track the omitted objects, so we'll replace those parameters with `NULL`. For the sake of simplicity, we'll add a simple -build-time branch to use our filter or not. Replace the line calling +build-time branch to use our filter or not. Preface the line calling `traverse_commit_list()` with the following, which will remind us which kind of walk we've just performed: @@ -733,19 +723,17 @@ walk we've just performed: if (0) { /* Unfiltered: */ trace_printf(_("Unfiltered object walk.\n")); - traverse_commit_list(rev, walken_show_commit, - walken_show_object, NULL); } else { trace_printf( _("Filtered object walk with filterspec 'tree:1'.\n")); - parse_list_objects_filter(&filter_options, "tree:1"); - - traverse_commit_list_filtered(&filter_options, rev, - walken_show_commit, walken_show_object, NULL, NULL); + CALLOC_ARRAY(rev->filter, 1); + parse_list_objects_filter(rev->filter, "tree:1"); } + traverse_commit_list(rev, walken_show_commit, + walken_show_object, NULL); ---- -`struct list_objects_filter_options` is usually built directly from a command +The `rev->filter` member is usually built directly from a command line argument, so the module provides an easy way to build one from a string. Even though we aren't taking user input right now, we can still build one with a hardcoded string using `parse_list_objects_filter()`. @@ -784,7 +772,7 @@ object: ---- ... - traverse_commit_list_filtered(&filter_options, rev, + traverse_commit_list_filtered(rev, walken_show_commit, walken_show_object, NULL, &omitted); ... diff --git a/Documentation/RelNotes/2.36.0.txt b/Documentation/RelNotes/2.36.0.txt index de1e11e25a..f1449eb926 100644 --- a/Documentation/RelNotes/2.36.0.txt +++ b/Documentation/RelNotes/2.36.0.txt @@ -16,7 +16,13 @@ Backward compatibility warts Note to those who build from the source - * + * Since Git 2.31, our source assumed that the compiler you use to + build Git supports variadic macros, with an easy-to-use escape + hatch to allow compilation without variadic macros with an request + to report that you had to use the escape hatch to the list. + Because we haven't heard from anybody who actually needed to use + the escape hatch, it has been removed, making support of variadic + macros a hard requirement. UI, Workflows & Features @@ -40,6 +46,38 @@ UI, Workflows & Features * "git branch" learned the "--recurse-submodules" option. + * A not-so-common mistake is to write a script to feed "git bisect + run" without making it executable, in which case all tests will + exit with 126 or 127 error codes, even on revisions that are marked + as good. Try to recognize this situation and stop iteration early. + + * When "index-pack" dies due to incoming data exceeding the maximum + allowed input size, include the value of the limit in the error + message. + + * The error message given by "git switch HEAD~4" has been clarified + to suggest the "--detach" option that is required. + + * In sparse-checkouts, files mis-marked as missing from the working tree + could lead to later problems. Such files were hard to discover, and + harder to correct. Automatically detecting and correcting the marking + of such files has been added to avoid these problems. + + * "git cat-file" learns "--batch-command" mode, which is a more + flexible interface than the existing "--batch" or "--batch-check" + modes, to allow different kinds of inquiries made. + + * The level of verbose output from the ort backend during inner merge + has been aligned to that of the recursive backend. + + * "git remote rename A B", depending on the number of remote-tracking + refs involved, takes long time renaming them. The command has been + taught to show progress bar while making the user wait. + + * Bundle file format gets extended to allow a partial bundle, + filtered by similar criteria you would give when making a + partial/lazy clone. + Performance, Internal Implementation, Development Support etc. @@ -73,6 +111,37 @@ Performance, Internal Implementation, Development Support etc. paths were unnecessarily confusing since it did not differentiate inner merges and outer merges. + * Small modernization of the rerere-train script (in contrib/). + + * Use designated initializers we started using in mid 2017 in more + parts of the codebase that are relatively quiescent. + + * Improve failure case behaviour of xdiff library when memory + allocation fails. + + * General clean-up in reftable implementation, including + clarification of the API documentation, tightening the code to + honor documented length limit, etc. + + * Remove the escape hatch we added when we introduced the weather + balloon to use variadic macros unconditionally, to make it official + that we now have a hard dependency on the feature. + + * Makefile refactoring with a bit of suffixes rule stripping to + optimize the runtime overhead. + + * "git stash drop" is reimplemented as an internal call to + reflog_delete() function, instead of invoking "git reflog delete" + via run_command() API. + + * Count string_list items in size_t, not "unsigned int". + + * The single-key interactive operation used by "git add -p" has been + made more robust. + + * Remove unneeded <meta http-equiv=content-type...> from gitweb + output. + Fixes since v2.35 ----------------- @@ -232,6 +301,39 @@ Fixes since v2.35 * Document Taylor as a new member of Git PLC at SFC. Welcome. (merge e8d56ca863 tb/coc-plc-update later to maint). + * "git checkout -b branch/with/multi/level/name && git stash" only + recorded the last level component of the branch name, which has + been corrected. + + * "git fetch" can make two separate fetches, but ref updates coming + from them were in two separate ref transactions under "--atomic", + which has been corrected. + + * Check the return value from parse_tree_indirect() to turn segfaults + into calls to die(). + (merge 8d2eaf649a gc/parse-tree-indirect-errors later to maint). + + * Newer version of GPGSM changed its output in a backward + incompatible way to break our code that parses its output. It also + added more processes our tests need to kill when cleaning up. + Adjustments have been made to accommodate these changes. + (merge b0b70d54c4 fs/gpgsm-update later to maint). + + * The untracked cache newly computed weren't written back to the + on-disk index file when there is no other change to the index, + which has been corrected. + + * "git config -h" did not describe the "--type" option correctly. + (merge 5445124fad mf/fix-type-in-config-h later to maint). + + * The way generation number v2 in the commit-graph files are + (not) handled has been corrected. + (merge 6dbf4b8172 ds/commit-graph-gen-v2-fixes later to maint). + + * The method to trigger malloc check used in our tests no longer work + with newer versions of glibc. + (merge baedc59543 ep/test-malloc-check-with-glibc-2.34 later to maint). + * Other code cleanup, docfix, build fix, etc. (merge cfc5cf428b jc/find-header later to maint). (merge 40e7cfdd46 jh/p4-fix-use-of-process-error-exception later to maint). @@ -256,3 +358,5 @@ Fixes since v2.35 (merge 332acc248d ds/mailmap later to maint). (merge 04bf052eef ab/grep-patterntype later to maint). (merge 6ee36364eb ab/diff-free-more later to maint). + (merge 63a36017fe nj/read-tree-doc-reffix later to maint). + (merge eed36fce38 sm/no-git-in-upstream-of-pipe-in-tests later to maint). diff --git a/Documentation/config.txt b/Documentation/config.txt index bf3e512921..f0fb25a371 100644 --- a/Documentation/config.txt +++ b/Documentation/config.txt @@ -503,6 +503,8 @@ include::config/sequencer.txt[] include::config/showbranch.txt[] +include::config/sparse.txt[] + include::config/splitindex.txt[] include::config/ssh.txt[] diff --git a/Documentation/config/advice.txt b/Documentation/config/advice.txt index adee26fbbb..c40eb09cb7 100644 --- a/Documentation/config/advice.txt +++ b/Documentation/config/advice.txt @@ -85,6 +85,9 @@ advice.*:: linkgit:git-switch[1] or linkgit:git-checkout[1] to move to the detach HEAD state, to instruct how to create a local branch after the fact. + suggestDetachingHead:: + Advice shown when linkgit:git-switch[1] refuses to detach HEAD + without the explicit `--detach` option. checkoutAmbiguousRemoteBranchName:: Advice shown when the argument to linkgit:git-checkout[1] and linkgit:git-switch[1] diff --git a/Documentation/config/sparse.txt b/Documentation/config/sparse.txt new file mode 100644 index 0000000000..aff49a8d3a --- /dev/null +++ b/Documentation/config/sparse.txt @@ -0,0 +1,27 @@ +sparse.expectFilesOutsideOfPatterns:: + Typically with sparse checkouts, files not matching any + sparsity patterns are marked with a SKIP_WORKTREE bit in the + index and are missing from the working tree. Accordingly, Git + will ordinarily check whether files with the SKIP_WORKTREE bit + are in fact present in the working tree contrary to + expectations. If Git finds any, it marks those paths as + present by clearing the relevant SKIP_WORKTREE bits. This + option can be used to tell Git that such + present-despite-skipped files are expected and to stop + checking for them. ++ +The default is `false`, which allows Git to automatically recover +from the list of files in the index and working tree falling out of +sync. ++ +Set this to `true` if you are in a setup where some external factor +relieves Git of the responsibility for maintaining the consistency +between the presence of working tree files and sparsity patterns. For +example, if you have a Git-aware virtual file system that has a robust +mechanism for keeping the working tree and the sparsity patterns up to +date based on access patterns. ++ +Regardless of this setting, Git does not check for +present-despite-skipped files unless sparse checkout is enabled, so +this config option has no effect unless `core.sparseCheckout` is +`true`. diff --git a/Documentation/git-bundle.txt b/Documentation/git-bundle.txt index 72ab813905..ac4c4352aa 100644 --- a/Documentation/git-bundle.txt +++ b/Documentation/git-bundle.txt @@ -75,8 +75,11 @@ verify <file>:: cleanly to the current repository. This includes checks on the bundle format itself as well as checking that the prerequisite commits exist and are fully linked in the current repository. - 'git bundle' prints a list of missing commits, if any, and exits - with a non-zero status. + Information about additional capabilities, such as "object filter", + is printed. See "Capabilities" in link:technical/bundle-format.html + for more information. Finally, 'git bundle' prints a list of + missing commits, if any. The exit code is zero for success, but + will be nonzero if the bundle file is invalid. list-heads <file>:: Lists the references defined in the bundle. If followed by a diff --git a/Documentation/git-cat-file.txt b/Documentation/git-cat-file.txt index bef76f4dd0..70c5b4f12d 100644 --- a/Documentation/git-cat-file.txt +++ b/Documentation/git-cat-file.txt @@ -96,6 +96,33 @@ OPTIONS need to specify the path, separated by whitespace. See the section `BATCH OUTPUT` below for details. +--batch-command:: +--batch-command=<format>:: + Enter a command mode that reads commands and arguments from stdin. May + only be combined with `--buffer`, `--textconv` or `--filters`. In the + case of `--textconv` or `--filters`, the input lines also need to specify + the path, separated by whitespace. See the section `BATCH OUTPUT` below + for details. ++ +`--batch-command` recognizes the following commands: ++ +-- +contents <object>:: + Print object contents for object reference `<object>`. This corresponds to + the output of `--batch`. + +info <object>:: + Print object info for object reference `<object>`. This corresponds to the + output of `--batch-check`. + +flush:: + Used with `--buffer` to execute all preceding commands that were issued + since the beginning or since the last flush was issued. When `--buffer` + is used, no output will come until a `flush` is issued. When `--buffer` + is not used, commands are flushed each time without issuing `flush`. +-- ++ + --batch-all-objects:: Instead of reading a list of objects on stdin, perform the requested batch operation on all objects in the repository and @@ -110,7 +137,7 @@ OPTIONS that a process can interactively read and write from `cat-file`. With this option, the output uses normal stdio buffering; this is much more efficient when invoking - `--batch-check` on a large number of objects. + `--batch-check` or `--batch-command` on a large number of objects. --unordered:: When `--batch-all-objects` is in use, visit objects in an @@ -202,6 +229,13 @@ from stdin, one per line, and print information about them. By default, the whole line is considered as an object, as if it were fed to linkgit:git-rev-parse[1]. +When `--batch-command` is given, `cat-file` will read commands from stdin, +one per line, and print information based on the command given. With +`--batch-command`, the `info` command followed by an object will print +information about the object the same way `--batch-check` would, and the +`contents` command followed by an object prints contents in the same way +`--batch` would. + You can specify the information shown for each object by using a custom `<format>`. The `<format>` is copied literally to stdout for each object, with placeholders of the form `%(atom)` expanded, followed by a @@ -237,9 +271,9 @@ newline. The available atoms are: If no format is specified, the default format is `%(objectname) %(objecttype) %(objectsize)`. -If `--batch` is specified, the object information is followed by the -object contents (consisting of `%(objectsize)` bytes), followed by a -newline. +If `--batch` is specified, or if `--batch-command` is used with the `contents` +command, the object information is followed by the object contents (consisting +of `%(objectsize)` bytes), followed by a newline. For example, `--batch` without a custom format would produce: diff --git a/Documentation/git-help.txt b/Documentation/git-help.txt index 44ea63cc6d..239c68db45 100644 --- a/Documentation/git-help.txt +++ b/Documentation/git-help.txt @@ -8,8 +8,8 @@ git-help - Display help information about Git SYNOPSIS -------- [verse] -'git help' [-a|--all [--[no-]verbose]] - [[-i|--info] [-m|--man] [-w|--web]] [<command>|<guide>] +'git help' [-a|--all] [--[no-]verbose] [--[no-]external-commands] [--[no-]aliases] +'git help' [[-i|--info] [-m|--man] [-w|--web]] [<command>|<guide>] 'git help' [-g|--guides] 'git help' [-c|--config] @@ -46,8 +46,15 @@ OPTIONS ------- -a:: --all:: - Prints all the available commands on the standard output. This - option overrides any given command or guide name. + Prints all the available commands on the standard output. + +--no-external-commands:: + When used with `--all`, exclude the listing of external "git-*" + commands found in the `$PATH`. + +--no-aliases:: + When used with `--all`, exclude the listing of configured + aliases. --verbose:: When used with `--all` print description for all recognized diff --git a/Documentation/git-index-pack.txt b/Documentation/git-index-pack.txt index 1f1e359225..4e71c256ec 100644 --- a/Documentation/git-index-pack.txt +++ b/Documentation/git-index-pack.txt @@ -122,6 +122,14 @@ This option cannot be used with --stdin. + include::object-format-disclaimer.txt[] +--promisor[=<message>]:: + Before committing the pack-index, create a .promisor file for this + pack. Particularly helpful when writing a promisor pack with --fix-thin + since the name of the pack is not final until the pack has been fully + written. If a `<message>` is provided, then that content will be + written to the .promisor file for future reference. See + link:technical/partial-clone.html[partial clone] for more information. + NOTES ----- diff --git a/Documentation/git-ls-files.txt b/Documentation/git-ls-files.txt index 48cc7c0b6f..0dabf3f0dd 100644 --- a/Documentation/git-ls-files.txt +++ b/Documentation/git-ls-files.txt @@ -156,7 +156,7 @@ a space) at the start of each line: --recurse-submodules:: Recursively calls ls-files on each active submodule in the repository. - Currently there is only support for the --cached mode. + Currently there is only support for the --cached and --stage modes. --abbrev[=<n>]:: Instead of showing the full 40-byte hexadecimal object diff --git a/Documentation/git-read-tree.txt b/Documentation/git-read-tree.txt index 8c3aceb832..a5356a230b 100644 --- a/Documentation/git-read-tree.txt +++ b/Documentation/git-read-tree.txt @@ -375,9 +375,14 @@ have finished your work-in-progress), attempt the merge again. SPARSE CHECKOUT --------------- +Note: The `update-index` and `read-tree` primitives for supporting the +skip-worktree bit predated the introduction of +linkgit:git-sparse-checkout[1]. Users are encouraged to use +`sparse-checkout` in preference to these low-level primitives. + "Sparse checkout" allows populating the working directory sparsely. -It uses the skip-worktree bit (see linkgit:git-update-index[1]) to tell -Git whether a file in the working directory is worth looking at. +It uses the skip-worktree bit (see linkgit:git-update-index[1]) to +tell Git whether a file in the working directory is worth looking at. 'git read-tree' and other merge-based commands ('git merge', 'git checkout'...) can help maintaining the skip-worktree bitmap and working @@ -385,7 +390,8 @@ directory update. `$GIT_DIR/info/sparse-checkout` is used to define the skip-worktree reference bitmap. When 'git read-tree' needs to update the working directory, it resets the skip-worktree bit in the index based on this file, which uses the same syntax as .gitignore files. -If an entry matches a pattern in this file, skip-worktree will not be +If an entry matches a pattern in this file, or the entry corresponds to +a file present in the working tree, then skip-worktree will not be set on that entry. Otherwise, skip-worktree will be set. Then it compares the new skip-worktree value with the previous one. If @@ -420,8 +426,8 @@ support. SEE ALSO -------- -linkgit:git-write-tree[1]; linkgit:git-ls-files[1]; -linkgit:gitignore[5]; linkgit:git-sparse-checkout[1]; +linkgit:git-write-tree[1], linkgit:git-ls-files[1], +linkgit:gitignore[5], linkgit:git-sparse-checkout[1] GIT --- diff --git a/Documentation/git-remote.txt b/Documentation/git-remote.txt index 2bebc32566..cde9614e36 100644 --- a/Documentation/git-remote.txt +++ b/Documentation/git-remote.txt @@ -11,7 +11,7 @@ SYNOPSIS [verse] 'git remote' [-v | --verbose] 'git remote add' [-t <branch>] [-m <master>] [-f] [--[no-]tags] [--mirror=(fetch|push)] <name> <URL> -'git remote rename' <old> <new> +'git remote rename' [--[no-]progress] <old> <new> 'git remote remove' <name> 'git remote set-head' <name> (-a | --auto | -d | --delete | <branch>) 'git remote set-branches' [--add] <name> <branch>... diff --git a/Documentation/git-sparse-checkout.txt b/Documentation/git-sparse-checkout.txt index 94dad137b9..88e55f432f 100644 --- a/Documentation/git-sparse-checkout.txt +++ b/Documentation/git-sparse-checkout.txt @@ -3,9 +3,7 @@ git-sparse-checkout(1) NAME ---- -git-sparse-checkout - Initialize and modify the sparse-checkout -configuration, which reduces the checkout to a set of paths -given by a list of patterns. +git-sparse-checkout - Reduce your working tree to a subset of tracked files SYNOPSIS @@ -17,8 +15,20 @@ SYNOPSIS DESCRIPTION ----------- -Initialize and modify the sparse-checkout configuration, which reduces -the checkout to a set of paths given by a list of patterns. +This command is used to create sparse checkouts, which means that it +changes the working tree from having all tracked files present, to only +have a subset of them. It can also switch which subset of files are +present, or undo and go back to having all tracked files present in the +working copy. + +The subset of files is chosen by providing a list of directories in +cone mode (which is recommended), or by providing a list of patterns +in non-cone mode. + +When in a sparse-checkout, other Git commands behave a bit differently. +For example, switching branches will not update paths outside the +sparse-checkout directories/patterns, and `git commit -a` will not record +paths outside the sparse-checkout directories/patterns as deleted. THIS COMMAND IS EXPERIMENTAL. ITS BEHAVIOR, AND THE BEHAVIOR OF OTHER COMMANDS IN THE PRESENCE OF SPARSE-CHECKOUTS, WILL LIKELY CHANGE IN @@ -28,7 +38,7 @@ THE FUTURE. COMMANDS -------- 'list':: - Describe the patterns in the sparse-checkout file. + Describe the directories or patterns in the sparse-checkout file. 'set':: Enable the necessary sparse-checkout config settings @@ -46,20 +56,26 @@ the 'set' subcommand are stored in the worktree-specific sparse-checkout file. See linkgit:git-worktree[1] and the documentation of `extensions.worktreeConfig` in linkgit:git-config[1] for more details. + -When the `--stdin` option is provided, the patterns are read from -standard in as a newline-delimited list instead of from the arguments. +When the `--stdin` option is provided, the directories or patterns are +read from standard in as a newline-delimited list instead of from the +arguments. + When `--cone` is passed or `core.sparseCheckoutCone` is enabled, the -input list is considered a list of directories instead of -sparse-checkout patterns. This allows for better performance with a -limited set of patterns (see 'CONE PATTERN SET' below). Note that the -set command will write patterns to the sparse-checkout file to include -all files contained in those directories (recursively) as well as -files that are siblings of ancestor directories. The input format -matches the output of `git ls-tree --name-only`. This includes -interpreting pathnames that begin with a double quote (") as C-style -quoted strings. This may become the default in the future; --no-cone -can be passed to request non-cone mode. +input list is considered a list of directories. This allows for +better performance with a limited set of patterns (see 'CONE PATTERN +SET' below). The input format matches the output of `git ls-tree +--name-only`. This includes interpreting pathnames that begin with a +double quote (") as C-style quoted strings. Note that the set command +will write patterns to the sparse-checkout file to include all files +contained in those directories (recursively) as well as files that are +siblings of ancestor directories. This may become the default in the +future; --no-cone can be passed to request non-cone mode. ++ +When `--no-cone` is passed or `core.sparseCheckoutCone` is not enabled, +the input list is considered a list of patterns. This mode is harder +to use and less performant, and is thus not recommended. See the +"Sparse Checkout" section of linkgit:git-read-tree[1] and the "Pattern +Set" sections below for more details. + Use the `--[no-]sparse-index` option to use a sparse index (the default is to not use it). A sparse index reduces the size of the @@ -77,11 +93,10 @@ understand the sparse directory entries index extension and may fail to interact with your repository until it is disabled. 'add':: - Update the sparse-checkout file to include additional patterns. - By default, these patterns are read from the command-line arguments, - but they can be read from stdin using the `--stdin` option. When - `core.sparseCheckoutCone` is enabled, the given patterns are interpreted - as directory names as in the 'set' subcommand. + Update the sparse-checkout file to include additional directories + (in cone mode) or patterns (in non-cone mode). By default, these + directories or patterns are read from the command-line arguments, + but they can be read from stdin using the `--stdin` option. 'reapply':: Reapply the sparsity pattern rules to paths in the working tree. @@ -125,13 +140,14 @@ decreased in utility. SPARSE CHECKOUT --------------- -"Sparse checkout" allows populating the working directory sparsely. -It uses the skip-worktree bit (see linkgit:git-update-index[1]) to tell -Git whether a file in the working directory is worth looking at. If -the skip-worktree bit is set, then the file is ignored in the working -directory. Git will avoid populating the contents of those files, which -makes a sparse checkout helpful when working in a repository with many -files, but only a few are important to the current user. +"Sparse checkout" allows populating the working directory sparsely. It +uses the skip-worktree bit (see linkgit:git-update-index[1]) to tell Git +whether a file in the working directory is worth looking at. If the +skip-worktree bit is set, and the file is not present in the working tree, +then its absence is ignored. Git will avoid populating the contents of +those files, which makes a sparse checkout helpful when working in a +repository with many files, but only a few are important to the current +user. The `$GIT_DIR/info/sparse-checkout` file is used to define the skip-worktree reference bitmap. When Git updates the working diff --git a/Documentation/git-update-index.txt b/Documentation/git-update-index.txt index 2853f168d9..568dbfe76b 100644 --- a/Documentation/git-update-index.txt +++ b/Documentation/git-update-index.txt @@ -351,6 +351,10 @@ unchanged". Note that "assume unchanged" bit is *not* set if the index (use `git update-index --really-refresh` if you want to mark them as "assume unchanged"). +Sometimes users confuse the assume-unchanged bit with the +skip-worktree bit. See the final paragraph in the "Skip-worktree bit" +section below for an explanation of the differences. + EXAMPLES -------- @@ -392,22 +396,47 @@ M foo.c SKIP-WORKTREE BIT ----------------- -Skip-worktree bit can be defined in one (long) sentence: When reading -an entry, if it is marked as skip-worktree, then Git pretends its -working directory version is up to date and read the index version -instead. - -To elaborate, "reading" means checking for file existence, reading -file attributes or file content. The working directory version may be -present or absent. If present, its content may match against the index -version or not. Writing is not affected by this bit, content safety -is still first priority. Note that Git _can_ update working directory -file, that is marked skip-worktree, if it is safe to do so (i.e. -working directory version matches index version) +Skip-worktree bit can be defined in one (long) sentence: Tell git to +avoid writing the file to the working directory when reasonably +possible, and treat the file as unchanged when it is not +present in the working directory. + +Note that not all git commands will pay attention to this bit, and +some only partially support it. + +The update-index flags and the read-tree capabilities relating to the +skip-worktree bit predated the introduction of the +linkgit:git-sparse-checkout[1] command, which provides a much easier +way to configure and handle the skip-worktree bits. If you want to +reduce your working tree to only deal with a subset of the files in +the repository, we strongly encourage the use of +linkgit:git-sparse-checkout[1] in preference to the low-level +update-index and read-tree primitives. + +The primary purpose of the skip-worktree bit is to enable sparse +checkouts, i.e. to have working directories with only a subset of +paths present. When the skip-worktree bit is set, Git commands (such +as `switch`, `pull`, `merge`) will avoid writing these files. +However, these commands will sometimes write these files anyway in +important cases such as conflicts during a merge or rebase. Git +commands will also avoid treating the lack of such files as an +intentional deletion; for example `git add -u` will not not stage a +deletion for these files and `git commit -a` will not make a commit +deleting them either. Although this bit looks similar to assume-unchanged bit, its goal is -different from assume-unchanged bit's. Skip-worktree also takes -precedence over assume-unchanged bit when both are set. +different. The assume-unchanged bit is for leaving the file in the +working tree but having Git omit checking it for changes and presuming +that the file has not been changed (though if it can determine without +stat'ing the file that it has changed, it is free to record the +changes). skip-worktree tells Git to ignore the absence of the file, +avoid updating it when possible with commands that normally update +much of the working directory (e.g. `checkout`, `switch`, `pull`, +etc.), and not have its absence be recorded in commits. Note that in +sparse checkouts (setup by `git sparse-checkout` or by configuring +core.sparseCheckout to true), if a file is marked as skip-worktree in +the index but is found in the working tree, Git will clear the +skip-worktree bit for that file. SPLIT INDEX ----------- diff --git a/Documentation/git-worktree.txt b/Documentation/git-worktree.txt index b8d53c4830..453e155022 100644 --- a/Documentation/git-worktree.txt +++ b/Documentation/git-worktree.txt @@ -25,45 +25,49 @@ Manage multiple working trees attached to the same repository. A git repository can support multiple working trees, allowing you to check out more than one branch at a time. With `git worktree add` a new working -tree is associated with the repository. This new working tree is called a -"linked working tree" as opposed to the "main working tree" prepared by -linkgit:git-init[1] or linkgit:git-clone[1]. -A repository has one main working tree (if it's not a -bare repository) and zero or more linked working trees. When you are done -with a linked working tree, remove it with `git worktree remove`. +tree is associated with the repository, along with additional metadata +that differentiates that working tree from others in the same repository. +The working tree, along with this metadata, is called a "worktree". + +This new worktree is called a "linked worktree" as opposed to the "main +worktree" prepared by linkgit:git-init[1] or linkgit:git-clone[1]. +A repository has one main worktree (if it's not a bare repository) and +zero or more linked worktrees. When you are done with a linked worktree, +remove it with `git worktree remove`. In its simplest form, `git worktree add <path>` automatically creates a new branch whose name is the final component of `<path>`, which is convenient if you plan to work on a new topic. For instance, `git worktree add ../hotfix` creates new branch `hotfix` and checks it out at -path `../hotfix`. To instead work on an existing branch in a new working -tree, use `git worktree add <path> <branch>`. On the other hand, if you -just plan to make some experimental changes or do testing without -disturbing existing development, it is often convenient to create a -'throwaway' working tree not associated with any branch. For instance, -`git worktree add -d <path>` creates a new working tree with a detached -`HEAD` at the same commit as the current branch. +path `../hotfix`. To instead work on an existing branch in a new worktree, +use `git worktree add <path> <branch>`. On the other hand, if you just +plan to make some experimental changes or do testing without disturbing +existing development, it is often convenient to create a 'throwaway' +worktree not associated with any branch. For instance, +`git worktree add -d <path>` creates a new worktree with a detached `HEAD` +at the same commit as the current branch. If a working tree is deleted without using `git worktree remove`, then its associated administrative files, which reside in the repository (see "DETAILS" below), will eventually be removed automatically (see `gc.worktreePruneExpire` in linkgit:git-config[1]), or you can run -`git worktree prune` in the main or any linked working tree to -clean up any stale administrative files. +`git worktree prune` in the main or any linked worktree to clean up any +stale administrative files. -If a linked working tree is stored on a portable device or network share -which is not always mounted, you can prevent its administrative files from -being pruned by issuing the `git worktree lock` command, optionally -specifying `--reason` to explain why the working tree is locked. +If the working tree for a linked worktree is stored on a portable device +or network share which is not always mounted, you can prevent its +administrative files from being pruned by issuing the `git worktree lock` +command, optionally specifying `--reason` to explain why the worktree is +locked. COMMANDS -------- add <path> [<commit-ish>]:: -Create `<path>` and checkout `<commit-ish>` into it. The new working directory -is linked to the current repository, sharing everything except working -directory specific files such as `HEAD`, `index`, etc. As a convenience, -`<commit-ish>` may be a bare "`-`", which is synonymous with `@{-1}`. +Create a worktree at `<path>` and checkout `<commit-ish>` into it. The new worktree +is linked to the current repository, sharing everything except per-worktree +files such as `HEAD`, `index`, etc. As a convenience, `<commit-ish>` may +be a bare "`-`", which is synonymous with `@{-1}`. + If `<commit-ish>` is a branch name (call it `<branch>`) and is not found, and neither `-b` nor `-B` nor `--detach` are used, but there does @@ -84,100 +88,97 @@ branches from there if `<branch>` is ambiguous but exists on the linkgit:git-config[1]. + If `<commit-ish>` is omitted and neither `-b` nor `-B` nor `--detach` used, -then, as a convenience, the new working tree is associated with a branch -(call it `<branch>`) named after `$(basename <path>)`. If `<branch>` -doesn't exist, a new branch based on `HEAD` is automatically created as -if `-b <branch>` was given. If `<branch>` does exist, it will be -checked out in the new working tree, if it's not checked out anywhere -else, otherwise the command will refuse to create the working tree (unless -`--force` is used). +then, as a convenience, the new worktree is associated with a branch (call +it `<branch>`) named after `$(basename <path>)`. If `<branch>` doesn't +exist, a new branch based on `HEAD` is automatically created as if +`-b <branch>` was given. If `<branch>` does exist, it will be checked out +in the new worktree, if it's not checked out anywhere else, otherwise the +command will refuse to create the worktree (unless `--force` is used). list:: -List details of each working tree. The main working tree is listed first, -followed by each of the linked working trees. The output details include -whether the working tree is bare, the revision currently checked out, the +List details of each worktree. The main worktree is listed first, +followed by each of the linked worktrees. The output details include +whether the worktree is bare, the revision currently checked out, the branch currently checked out (or "detached HEAD" if none), "locked" if -the worktree is locked, "prunable" if the worktree can be pruned by `prune` -command. +the worktree is locked, "prunable" if the worktree can be pruned by the +`prune` command. lock:: -If a working tree is on a portable device or network share which -is not always mounted, lock it to prevent its administrative -files from being pruned automatically. This also prevents it from -being moved or deleted. Optionally, specify a reason for the lock -with `--reason`. +If a worktree is on a portable device or network share which is not always +mounted, lock it to prevent its administrative files from being pruned +automatically. This also prevents it from being moved or deleted. +Optionally, specify a reason for the lock with `--reason`. move:: -Move a working tree to a new location. Note that the main working tree -or linked working trees containing submodules cannot be moved with this -command. (The `git worktree repair` command, however, can reestablish -the connection with linked working trees if you move the main working -tree manually.) +Move a worktree to a new location. Note that the main worktree or linked +worktrees containing submodules cannot be moved with this command. (The +`git worktree repair` command, however, can reestablish the connection +with linked worktrees if you move the main worktree manually.) prune:: -Prune working tree information in `$GIT_DIR/worktrees`. +Prune worktree information in `$GIT_DIR/worktrees`. remove:: -Remove a working tree. Only clean working trees (no untracked files -and no modification in tracked files) can be removed. Unclean working -trees or ones with submodules can be removed with `--force`. The main -working tree cannot be removed. +Remove a worktree. Only clean worktrees (no untracked files and no +modification in tracked files) can be removed. Unclean worktrees or ones +with submodules can be removed with `--force`. The main worktree cannot be +removed. repair [<path>...]:: -Repair working tree administrative files, if possible, if they have -become corrupted or outdated due to external factors. +Repair worktree administrative files, if possible, if they have become +corrupted or outdated due to external factors. + -For instance, if the main working tree (or bare repository) is moved, -linked working trees will be unable to locate it. Running `repair` in -the main working tree will reestablish the connection from linked -working trees back to the main working tree. +For instance, if the main worktree (or bare repository) is moved, linked +worktrees will be unable to locate it. Running `repair` in the main +worktree will reestablish the connection from linked worktrees back to the +main worktree. + -Similarly, if a linked working tree is moved without using `git worktree -move`, the main working tree (or bare repository) will be unable to -locate it. Running `repair` within the recently-moved working tree will -reestablish the connection. If multiple linked working trees are moved, -running `repair` from any working tree with each tree's new `<path>` as -an argument, will reestablish the connection to all the specified paths. +Similarly, if the working tree for a linked worktree is moved without +using `git worktree move`, the main worktree (or bare repository) will be +unable to locate it. Running `repair` within the recently-moved worktree +will reestablish the connection. If multiple linked worktrees are moved, +running `repair` from any worktree with each tree's new `<path>` as an +argument, will reestablish the connection to all the specified paths. + -If both the main working tree and linked working trees have been moved -manually, then running `repair` in the main working tree and specifying the -new `<path>` of each linked working tree will reestablish all connections -in both directions. +If both the main worktree and linked worktrees have been moved manually, +then running `repair` in the main worktree and specifying the new `<path>` +of each linked worktree will reestablish all connections in both +directions. unlock:: -Unlock a working tree, allowing it to be pruned, moved or deleted. +Unlock a worktree, allowing it to be pruned, moved or deleted. OPTIONS ------- -f:: --force:: - By default, `add` refuses to create a new working tree when + By default, `add` refuses to create a new worktree when `<commit-ish>` is a branch name and is already checked out by - another working tree, or if `<path>` is already assigned to some - working tree but is missing (for instance, if `<path>` was deleted + another worktree, or if `<path>` is already assigned to some + worktree but is missing (for instance, if `<path>` was deleted manually). This option overrides these safeguards. To add a missing but - locked working tree path, specify `--force` twice. + locked worktree path, specify `--force` twice. + -`move` refuses to move a locked working tree unless `--force` is specified -twice. If the destination is already assigned to some other working tree but is +`move` refuses to move a locked worktree unless `--force` is specified +twice. If the destination is already assigned to some other worktree but is missing (for instance, if `<new-path>` was deleted manually), then `--force` allows the move to proceed; use `--force` twice if the destination is locked. + -`remove` refuses to remove an unclean working tree unless `--force` is used. -To remove a locked working tree, specify `--force` twice. +`remove` refuses to remove an unclean worktree unless `--force` is used. +To remove a locked worktree, specify `--force` twice. -b <new-branch>:: -B <new-branch>:: With `add`, create a new branch named `<new-branch>` starting at - `<commit-ish>`, and check out `<new-branch>` into the new working tree. + `<commit-ish>`, and check out `<new-branch>` into the new worktree. If `<commit-ish>` is omitted, it defaults to `HEAD`. By default, `-b` refuses to create a new branch if it already exists. `-B` overrides this safeguard, resetting `<new-branch>` to @@ -185,7 +186,7 @@ To remove a locked working tree, specify `--force` twice. -d:: --detach:: - With `add`, detach `HEAD` in the new working tree. See "DETACHED HEAD" + With `add`, detach `HEAD` in the new worktree. See "DETACHED HEAD" in linkgit:git-checkout[1]. --[no-]checkout:: @@ -211,7 +212,7 @@ This can also be set up as the default behaviour by using the `--track` in linkgit:git-branch[1] for details. --lock:: - Keep the working tree locked after creation. This is the + Keep the worktree locked after creation. This is the equivalent of `git worktree lock` after `git worktree add`, but without a race condition. @@ -236,43 +237,42 @@ This can also be set up as the default behaviour by using the With `list`, output additional information about worktrees (see below). --expire <time>:: - With `prune`, only expire unused working trees older than `<time>`. + With `prune`, only expire unused worktrees older than `<time>`. + -With `list`, annotate missing working trees as prunable if they are -older than `<time>`. +With `list`, annotate missing worktrees as prunable if they are older than +`<time>`. --reason <string>:: - With `lock` or with `add --lock`, an explanation why the working tree is locked. + With `lock` or with `add --lock`, an explanation why the worktree + is locked. <worktree>:: - Working trees can be identified by path, either relative or - absolute. + Worktrees can be identified by path, either relative or absolute. + -If the last path components in the working tree's path is unique among -working trees, it can be used to identify a working tree. For example if -you only have two working trees, at `/abc/def/ghi` and `/abc/def/ggg`, -then `ghi` or `def/ghi` is enough to point to the former working tree. +If the last path components in the worktree's path is unique among +worktrees, it can be used to identify a worktree. For example if you only +have two worktrees, at `/abc/def/ghi` and `/abc/def/ggg`, then `ghi` or +`def/ghi` is enough to point to the former worktree. REFS ---- -In multiple working trees, some refs may be shared between all working -trees and some refs are local. One example is `HEAD` which is different for each -working tree. This section is about the sharing rules and how to access -refs of one working tree from another. - -In general, all pseudo refs are per working tree and all refs starting -with `refs/` are shared. Pseudo refs are ones like `HEAD` which are -directly under `$GIT_DIR` instead of inside `$GIT_DIR/refs`. There are -exceptions, however: refs inside `refs/bisect` and `refs/worktree` are not -shared. - -Refs that are per working tree can still be accessed from another -working tree via two special paths, `main-worktree` and `worktrees`. The -former gives access to per-working tree refs of the main working tree, -while the latter to all linked working trees. +When using multiple worktrees, some refs are shared between all worktrees, +but others are specific to an individual worktree. One example is `HEAD`, +which is different for each worktree. This section is about the sharing +rules and how to access refs of one worktree from another. + +In general, all pseudo refs are per-worktree and all refs starting with +`refs/` are shared. Pseudo refs are ones like `HEAD` which are directly +under `$GIT_DIR` instead of inside `$GIT_DIR/refs`. There are exceptions, +however: refs inside `refs/bisect` and `refs/worktree` are not shared. + +Refs that are per-worktree can still be accessed from another worktree via +two special paths, `main-worktree` and `worktrees`. The former gives +access to per-worktree refs of the main worktree, while the latter to all +linked worktrees. For example, `main-worktree/HEAD` or `main-worktree/refs/bisect/good` -resolve to the same value as the main working tree's `HEAD` and +resolve to the same value as the main worktree's `HEAD` and `refs/bisect/good` respectively. Similarly, `worktrees/foo/HEAD` or `worktrees/bar/refs/bisect/bad` are the same as `$GIT_COMMON_DIR/worktrees/foo/HEAD` and @@ -284,13 +284,13 @@ which will handle refs correctly. CONFIGURATION FILE ------------------ -By default, the repository `config` file is shared across all working -trees. If the config variables `core.bare` or `core.worktree` are -present in the common config file and `extensions.worktreeConfig` is -disabled, then they will be applied to the main working tree only. +By default, the repository `config` file is shared across all worktrees. +If the config variables `core.bare` or `core.worktree` are present in the +common config file and `extensions.worktreeConfig` is disabled, then they +will be applied to the main worktree only. -In order to have configuration specific to working trees, you can turn -on the `worktreeConfig` extension, e.g.: +In order to have worktree-specific configuration, you can turn on the +`worktreeConfig` extension, e.g.: ------------ $ git config extensions.worktreeConfig true @@ -303,45 +303,45 @@ versions will refuse to access repositories with this extension. Note that in this file, the exception for `core.bare` and `core.worktree` is gone. If they exist in `$GIT_DIR/config`, you must move -them to the `config.worktree` of the main working tree. You may also -take this opportunity to review and move other configuration that you -do not want to share to all working trees: +them to the `config.worktree` of the main worktree. You may also take this +opportunity to review and move other configuration that you do not want to +share to all worktrees: - `core.worktree` should never be shared. - `core.bare` should not be shared if the value is `core.bare=true`. - - `core.sparseCheckout` is recommended per working tree, unless you - are sure you always use sparse checkout for all working trees. + - `core.sparseCheckout` should not be shared, unless you are sure you + always use sparse checkout for all worktrees. See the documentation of `extensions.worktreeConfig` in linkgit:git-config[1] for more details. DETAILS ------- -Each linked working tree has a private sub-directory in the repository's +Each linked worktree has a private sub-directory in the repository's `$GIT_DIR/worktrees` directory. The private sub-directory's name is usually -the base name of the linked working tree's path, possibly appended with a +the base name of the linked worktree's path, possibly appended with a number to make it unique. For example, when `$GIT_DIR=/path/main/.git` the command `git worktree add /path/other/test-next next` creates the linked -working tree in `/path/other/test-next` and also creates a +worktree in `/path/other/test-next` and also creates a `$GIT_DIR/worktrees/test-next` directory (or `$GIT_DIR/worktrees/test-next1` if `test-next` is already taken). -Within a linked working tree, `$GIT_DIR` is set to point to this private +Within a linked worktree, `$GIT_DIR` is set to point to this private directory (e.g. `/path/main/.git/worktrees/test-next` in the example) and -`$GIT_COMMON_DIR` is set to point back to the main working tree's `$GIT_DIR` +`$GIT_COMMON_DIR` is set to point back to the main worktree's `$GIT_DIR` (e.g. `/path/main/.git`). These settings are made in a `.git` file located at -the top directory of the linked working tree. +the top directory of the linked worktree. Path resolution via `git rev-parse --git-path` uses either `$GIT_DIR` or `$GIT_COMMON_DIR` depending on the path. For example, in the -linked working tree `git rev-parse --git-path HEAD` returns +linked worktree `git rev-parse --git-path HEAD` returns `/path/main/.git/worktrees/test-next/HEAD` (not `/path/other/test-next/.git/HEAD` or `/path/main/.git/HEAD`) while `git rev-parse --git-path refs/heads/master` uses `$GIT_COMMON_DIR` and returns `/path/main/.git/refs/heads/master`, -since refs are shared across all working trees, except `refs/bisect` and +since refs are shared across all worktrees, except `refs/bisect` and `refs/worktree`. See linkgit:gitrepository-layout[5] for more information. The rule of @@ -349,8 +349,8 @@ thumb is do not make any assumption about whether a path belongs to `$GIT_DIR` or `$GIT_COMMON_DIR` when you need to directly access something inside `$GIT_DIR`. Use `git rev-parse --git-path` to get the final path. -If you manually move a linked working tree, you need to update the `gitdir` file -in the entry's directory. For example, if a linked working tree is moved +If you manually move a linked worktree, you need to update the `gitdir` file +in the entry's directory. For example, if a linked worktree is moved to `/newpath/test-next` and its `.git` file points to `/path/main/.git/worktrees/test-next`, then update `/path/main/.git/worktrees/test-next/gitdir` to reference `/newpath/test-next` @@ -359,10 +359,10 @@ automatically. To prevent a `$GIT_DIR/worktrees` entry from being pruned (which can be useful in some situations, such as when the -entry's working tree is stored on a portable device), use the +entry's worktree is stored on a portable device), use the `git worktree lock` command, which adds a file named `locked` to the entry's directory. The file contains the reason in -plain text. For example, if a linked working tree's `.git` file points +plain text. For example, if a linked worktree's `.git` file points to `/path/main/.git/worktrees/test-next` then a file named `/path/main/.git/worktrees/test-next/locked` will prevent the `test-next` entry from being pruned. See @@ -383,11 +383,11 @@ $ git worktree list /path/to/other-linked-worktree 1234abc (detached HEAD) ------------ -The command also shows annotations for each working tree, according to its state. +The command also shows annotations for each worktree, according to its state. These annotations are: - * `locked`, if the working tree is locked. - * `prunable`, if the working tree can be pruned via `git worktree prune`. + * `locked`, if the worktree is locked. + * `prunable`, if the worktree can be pruned via `git worktree prune`. ------------ $ git worktree list @@ -405,14 +405,14 @@ $ git worktree list --verbose /path/to/linked-worktree abcd1234 [master] /path/to/locked-worktree-no-reason abcd5678 (detached HEAD) locked /path/to/locked-worktree-with-reason 1234abcd (brancha) - locked: working tree path is mounted on a portable device + locked: worktree path is mounted on a portable device /path/to/prunable-worktree 5678abc1 (detached HEAD) prunable: gitdir file points to non-existent location ------------ Note that the annotation is moved to the next line if the additional information is available, otherwise it stays on the same line as the -working tree itself. +worktree itself. Porcelain Format ~~~~~~~~~~~~~~~~ @@ -421,7 +421,7 @@ label and value separated by a single space. Boolean attributes (like `bare` and `detached`) are listed as a label only, and are present only if the value is true. Some attributes (like `locked`) can be listed as a label only or with a value depending upon whether a reason is available. The first -attribute of a working tree is always `worktree`, an empty line indicates the +attribute of a worktree is always `worktree`, an empty line indicates the end of the record. For example: ------------ @@ -473,7 +473,7 @@ demands that you fix something immediately. You might typically use linkgit:git-stash[1] to store your changes away temporarily, however, your working tree is in such a state of disarray (with new, moved, and removed files, and other bits and pieces strewn around) that you don't want to risk -disturbing any of it. Instead, you create a temporary linked working tree to +disturbing any of it. Instead, you create a temporary linked worktree to make the emergency fix, remove it when done, and then resume your earlier refactoring session. diff --git a/Documentation/technical/bundle-format.txt b/Documentation/technical/bundle-format.txt index bac558d049..b9be8644cf 100644 --- a/Documentation/technical/bundle-format.txt +++ b/Documentation/technical/bundle-format.txt @@ -71,6 +71,11 @@ and the Git bundle v2 format cannot represent a shallow clone repository. == Capabilities Because there is no opportunity for negotiation, unknown capabilities cause 'git -bundle' to abort. The only known capability is `object-format`, which specifies -the hash algorithm in use, and can take the same values as the -`extensions.objectFormat` configuration value. +bundle' to abort. + +* `object-format` specifies the hash algorithm in use, and can take the same + values as the `extensions.objectFormat` configuration value. + +* `filter` specifies an object filter as in the `--filter` option in + linkgit:git-rev-list[1]. The resulting pack-file must be marked as a + `.promisor` pack-file after it is unbundled. diff --git a/Documentation/technical/commit-graph-format.txt b/Documentation/technical/commit-graph-format.txt index 87971c27dd..484b185ba9 100644 --- a/Documentation/technical/commit-graph-format.txt +++ b/Documentation/technical/commit-graph-format.txt @@ -93,7 +93,7 @@ CHUNK DATA: 2 bits of the lowest byte, storing the 33rd and 34th bit of the commit time. - Generation Data (ID: {'G', 'D', 'A', 'T' }) (N * 4 bytes) [Optional] + Generation Data (ID: {'G', 'D', 'A', '2' }) (N * 4 bytes) [Optional] * This list of 4-byte values store corrected commit date offsets for the commits, arranged in the same order as commit data chunk. * If the corrected commit date offset cannot be stored within 31 bits, @@ -104,7 +104,7 @@ CHUNK DATA: by compatible versions of Git and in case of split commit-graph chains, the topmost layer also has Generation Data chunk. - Generation Data Overflow (ID: {'G', 'D', 'O', 'V' }) [Optional] + Generation Data Overflow (ID: {'G', 'D', 'O', '2' }) [Optional] * This list of 8-byte values stores the corrected commit date offsets for commits with corrected commit date offsets that cannot be stored within 31 bits. @@ -156,3 +156,11 @@ CHUNK DATA: TRAILER: H-byte HASH-checksum of all of the above. + +== Historical Notes: + +The Generation Data (GDA2) and Generation Data Overflow (GDO2) chunks have +the number '2' in their chunk IDs because a previous version of Git wrote +possibly erroneous data in these chunks with the IDs "GDAT" and "GDOV". By +changing the IDs, newer versions of Git will silently ignore those older +chunks and write the new information without trusting the incorrect data. diff --git a/Documentation/technical/reftable.txt b/Documentation/technical/reftable.txt index d7c3b645cf..6a67cc4174 100644 --- a/Documentation/technical/reftable.txt +++ b/Documentation/technical/reftable.txt @@ -443,7 +443,7 @@ Obj block format Object blocks are optional. Writers may choose to omit object blocks, especially if readers will not use the object name to ref mapping. -Object blocks use unique, abbreviated 2-32 object name keys, mapping to +Object blocks use unique, abbreviated 2-31 byte object name keys, mapping to ref blocks containing references pointing to that object directly, or as the peeled value of an annotated tag. Like ref blocks, object blocks use the file's standard block size. The abbreviation length is available in |