diff options
Diffstat (limited to 'Documentation')
57 files changed, 1393 insertions, 281 deletions
diff --git a/Documentation/CodingGuidelines b/Documentation/CodingGuidelines index 0ddd36879a..7f4769a02c 100644 --- a/Documentation/CodingGuidelines +++ b/Documentation/CodingGuidelines @@ -526,12 +526,19 @@ Writing Documentation: modifying paragraphs or option/command explanations that contain options or commands: - Literal examples (e.g. use of command-line options, command names, and - configuration variables) are typeset in monospace, and if you can use - `backticks around word phrases`, do so. + Literal examples (e.g. use of command-line options, command names, + configuration and environment variables) must be typeset in monospace (i.e. + wrapped with backticks): `--pretty=oneline` `git rev-list` `remote.pushDefault` + `GIT_DIR` + + An environment variable must be prefixed with "$" only when referring to its + value and not when referring to the variable itself, in this case there is + nothing to add except the backticks: + `GIT_DIR` is specified + `$GIT_DIR/hooks/pre-receive` Word phrases enclosed in `backtick characters` are rendered literally and will not be further expanded. The use of `backticks` to achieve the diff --git a/Documentation/Makefile b/Documentation/Makefile index 3e39e2815b..b43d66eae6 100644 --- a/Documentation/Makefile +++ b/Documentation/Makefile @@ -76,6 +76,7 @@ TECH_DOCS += technical/protocol-common TECH_DOCS += technical/racy-git TECH_DOCS += technical/send-pack-pipeline TECH_DOCS += technical/shallow +TECH_DOCS += technical/signature-format TECH_DOCS += technical/trivial-merge SP_ARTICLES += $(TECH_DOCS) SP_ARTICLES += technical/api-index @@ -146,7 +147,7 @@ else ASCIIDOC_EXTRA += -a git-asciidoc-no-roff endif endif -ifdef MAN_BOLD_LITERAL +ifndef NO_MAN_BOLD_LITERAL XMLTO_EXTRA += -m manpage-bold-literal.xsl endif ifdef DOCBOOK_SUPPRESS_SP @@ -204,6 +205,7 @@ ifndef V QUIET_DBLATEX = @echo ' ' DBLATEX $@; QUIET_XSLTPROC = @echo ' ' XSLTPROC $@; QUIET_GEN = @echo ' ' GEN $@; + QUIET_LINT = @echo ' ' LINT $@; QUIET_STDERR = 2> /dev/null QUIET_SUBDIR0 = +@subdir= QUIET_SUBDIR1 = ;$(NO_SUBDIR) echo ' ' SUBDIR $$subdir; \ @@ -427,4 +429,7 @@ quick-install-html: require-htmlrepo print-man1: @for i in $(MAN1_TXT); do echo $$i; done +lint-docs:: + $(QUIET_LINT)$(PERL_PATH) lint-gitlink.perl + .PHONY: FORCE diff --git a/Documentation/RelNotes/2.8.4.txt b/Documentation/RelNotes/2.8.4.txt index 8d484b170a..f4e2552836 100644 --- a/Documentation/RelNotes/2.8.4.txt +++ b/Documentation/RelNotes/2.8.4.txt @@ -52,4 +52,18 @@ Fixes since v2.8.3 result in a strange error message in a pathological corner case. This has been corrected to suggest "submodule deinit --all" instead. + * Many commands normalize command line arguments from NFD to NFC + variant of UTF-8 on OSX, but commands in the "diff" family did + not, causing "git diff $path" to complain that no such path is + known to Git. They have been taught to do the normalization. + + * A couple of bugs around core.autocrlf have been fixed. + + * "git difftool" learned to handle unmerged paths correctly in + dir-diff mode. + + * The "are we talking with TTY, doing an interactive session?" + detection has been updated to work better for "Git for Windows". + + Also contains other minor documentation updates and code clean-ups. diff --git a/Documentation/RelNotes/2.9.0.txt b/Documentation/RelNotes/2.9.0.txt new file mode 100644 index 0000000000..b61d36712f --- /dev/null +++ b/Documentation/RelNotes/2.9.0.txt @@ -0,0 +1,512 @@ +Git 2.9 Release Notes +===================== + +Backward compatibility notes +---------------------------- + +The end-user facing Porcelain level commands in the "git diff" and +"git log" family by default enable the rename detection; you can still +use "diff.renames" configuration variable to disable this. + +Merging two branches that have no common ancestor with "git merge" is +by default forbidden now to prevent creating such an unusual merge by +mistake. + +The output formats of "git log" that indents the commit log message by +4 spaces now expands HT in the log message by default. You can use +the "--no-expand-tabs" option to disable this. + +"git commit-tree" plumbing command required the user to always sign +its result when the user sets the commit.gpgsign configuration +variable, which was an ancient mistake, which this release corrects. +A script that drives commit-tree, if it relies on this mistake, now +needs to read commit.gpgsign and pass the -S option as necessary. + + +Updates since v2.8 +------------------ + +UI, Workflows & Features + + * Comes with git-multimail 1.3.1 (in contrib/). + + * The end-user facing commands like "git diff" and "git log" + now enable the rename detection by default. + + * The credential.helper configuration variable is cumulative and + there is no good way to override it from the command line. As + a special case, giving an empty string as its value now serves + as the signal to clear the values specified in various files. + + * A new "interactive.diffFilter" configuration can be used to + customize the diff shown in "git add -i" sessions. + + * "git p4" now allows P4 author names to be mapped to Git author + names. + + * "git rebase -x" can be used without passing "-i" option. + + * "git -c credential.<var>=<value> submodule" can now be used to + propagate configuration variables related to credential helper + down to the submodules. + + * "git tag" can create an annotated tag without explicitly given an + "-a" (or "-s") option (i.e. when a tag message is given). A new + configuration variable, tag.forceSignAnnotated, can be used to tell + the command to create signed tag in such a situation. + + * "git merge" used to allow merging two branches that have no common + base by default, which led to a brand new history of an existing + project created and then get pulled by an unsuspecting maintainer, + which allowed an unnecessary parallel history merged into the + existing project. The command has been taught not to allow this by + default, with an escape hatch "--allow-unrelated-histories" option + to be used in a rare event that merges histories of two projects + that started their lives independently. + + * "git pull" has been taught to pass the "--allow-unrelated-histories" + option to underlying "git merge". + + * "git apply -v" learned to report paths in the patch that were + skipped via --include/--exclude mechanism or being outside the + current working directory. + + * Shell completion (in contrib/) updates. + + * The commit object name reported when "rebase -i" stops has been + shortened. + + * "git worktree add" can be given "--no-checkout" option to only + create an empty worktree without checking out the files. + + * "git mergetools" learned to drive ExamDiff. + + * "git pull --rebase" learned "--[no-]autostash" option, so that + the rebase.autostash configuration variable set to true can be + overridden from the command line. + + * When "git log" shows the log message indented by 4-spaces, the + remainder of a line after a HT does not align in the way the author + originally intended. The command now expands tabs by default to help + such a case, and allows the users to override it with a new option, + "--no-expand-tabs". + + * "git send-email" now uses a more readable timestamps when + formulating a message ID. + + * "git rerere" can encounter two or more files with the same conflict + signature that have to be resolved in different ways, but there was + no way to record these separate resolutions. + + * "git p4" learned to record P4 jobs in Git commit that imports from + the history in Perforce. + + * "git describe --contains" often made a hard-to-justify choice of + tag to name a given commit, because it tried to come up + with a name with smallest number of hops from a tag, causing an old + commit whose close descendant that is recently tagged were not + described with respect to an old tag but with a newer tag. It did + not help that its computation of "hop" count was further tweaked to + penalize being on a side branch of a merge. The logic has been + updated to favor using the tag with the oldest tagger date, which + is a lot easier to explain to the end users: "We describe a commit + in terms of the (chronologically) oldest tag that contains the + commit." + + * "git clone" learned the "--shallow-submodules" option. + + * HTTP transport clients learned to throw extra HTTP headers at the + server, specified via http.extraHeader configuration variable. + + * The "--compaction-heuristic" option to "git diff" family of + commands enables a heuristic to make the patch output more readable + by using a blank line as a strong hint that the contents before and + after it belong to logically separate units. It is still + experimental. + + * A new configuration variable core.hooksPath allows customizing + where the hook directory is. + + * An earlier addition of "sanitize_submodule_env" with 14111fc4 (git: + submodule honor -c credential.* from command line, 2016-02-29) + turned out to be a convoluted no-op; implement what it wanted to do + correctly, and stop filtering settings given via "git -c var=val". + + * "git commit --dry-run" reported "No, no, you cannot commit." in one + case where "git commit" would have allowed you to commit, and this + improves it a little bit ("git commit --dry-run --short" still does + not give you the correct answer, for example). This is a stop-gap + measure in that "commit --short --dry-run" still gives an incorrect + result. + + * The experimental "multiple worktree" feature gains more safety to + forbid operations on a branch that is checked out or being actively + worked on elsewhere, by noticing that e.g. it is being rebased. + + * "git format-patch" learned a new "--base" option to record what + (public, well-known) commit the original series was built on in + its output. + + * "git commit" learned to pay attention to the "commit.verbose" + configuration variable and act as if the "--verbose" option + was given from the command line. + + * Updated documentation gives hints to GMail users with two-factor + auth enabled that they need app-specific-password when using + "git send-email". + + * The manpage output of our documentation did not render well in + terminal; typeset literals in bold by default to make them stand + out more. + + * The mark-up in the top-level README.md file has been updated to + typeset CLI command names differently from the body text. + + +Performance, Internal Implementation, Development Support etc. + + * The embedded args argv-array in the child process is used to build + the command line to run pack-objects instead of using a separate + array of strings. + + * A test for tags has been restructured so that more parts of it can + easily be run on a platform without a working GnuPG. + + * The startup_info data, which records if we are working inside a + repository (among other things), are now uniformly available to Git + subcommand implementations, and Git avoids attempting to touch + references when we are not in a repository. + + * The command line argument parser for "receive-pack" has been + rewritten to use parse-options. + + * A major part of "git submodule update" has been ported to C to take + advantage of the recently added framework to run download tasks in + parallel. Other updates to "git submodule" that move pieces of + logic to C continues. + + * Rename bunch of tests on "git clone" for better organization. + + * The tests that involve running httpd leaked the system-wide + configuration in /etc/gitconfig to the tested environment. + + * Build updates for MSVC. + + * The repository set-up sequence has been streamlined (the biggest + change is that there is no longer git_config_early()), so that we + do not attempt to look into refs/* when we know we do not have a + Git repository. + + * Code restructuring around the "refs" API to prepare for pluggable + refs backends. + + * Sources to many test helper binaries and the generated helpers + have been moved to t/helper/ subdirectory to reduce clutter at the + top level of the tree. + + * Unify internal logic between "git tag -v" and "git verify-tag" + commands by making one directly call into the other. + + * "merge-recursive" strategy incorrectly checked if a path that is + involved in its internal merge exists in the working tree. + + * The test scripts for "git p4" (but not "git p4" implementation + itself) has been updated so that they would work even on a system + where the installed version of Python is python 3. + + * As nobody maintains our in-tree git.spec.in and distros use their + own spec file, we stopped pretending that we support "make rpm". + + * Move from "unsigned char[20]" to "struct object_id" continues. + + * The code for warning_errno/die_errno has been refactored and a new + error_errno() reporting helper is introduced. + (merge 1da045f nd/error-errno later to maint). + + * Running tests with '-x' option to trace the individual command + executions is a useful way to debug test scripts, but some tests + that capture the standard error stream and check what the command + said can be broken with the trace output mixed in. When running + our tests under "bash", however, we can redirect the trace output + to another file descriptor to keep the standard error of programs + being tested intact. + + * t0040 had too many unnecessary repetitions in its test data. Teach + test-parse-options program so that a caller can tell what it + expects in its output, so that these repetitions can be cleaned up. + + * Add perf test for "rebase -i". + + * Common mistakes when writing gitlink: in our documentation are + found by "make check-docs". + + * t9xxx series has been updated primarily for readability, while + fixing small bugs in it. A few scripted Porcelain commands have + also been updated to fix possible bugs around their use of + "test -z" and "test -n". + + * CI test was taught to run git-svn tests. + + * "git cat-file --batch-all" has been sped up, by taking advantage + of the fact that it does not have to read a list of objects, in two + ways. + + * test updates to make it more readable and maintainable. + (merge e6273f4 es/t1500-modernize later to maint). + + * "make DEVELOPER=1" worked as expected; setting DEVELOPER=1 in + config.mak didn't. + (merge 51dd3e8 mm/makefile-developer-can-be-in-config-mak later to maint). + + * The way how "submodule--helper list" signals unmatch error to its + callers has been updated. + + * A bash-ism "local" has been removed from "git submodule" scripted + Porcelain. + + +Also contains various documentation updates and code clean-ups. + + +Fixes since v2.8 +---------------- + +Unless otherwise noted, all the fixes since v2.8 in the maintenance +track are contained in this release (see the maintenance releases' +notes for details). + + * "git config --get-urlmatch", unlike other variants of the "git + config --get" family, did not signal error with its exit status + when there was no matching configuration. + + * The "--local-env-vars" and "--resolve-git-dir" options of "git + rev-parse" failed to work outside a repository when the command's + option parsing was rewritten in 1.8.5 era. + + * "git index-pack --keep[=<msg>] pack-$name.pack" simply did not work. + + * Fetching of history by naming a commit object name directly didn't + work across remote-curl transport. + + * A small memory leak in an error codepath has been plugged in xdiff + code. + + * strbuf_getwholeline() did not NUL-terminate the buffer on certain + corner cases in its error codepath. + + * "git mergetool" did not work well with conflicts that both sides + deleted. + + * "git send-email" had trouble parsing alias file in mailrc format + when lines in it had trailing whitespaces on them. + + * When "git merge --squash" stopped due to conflict, the concluding + "git commit" failed to read in the SQUASH_MSG that shows the log + messages from all the squashed commits. + + * "git merge FETCH_HEAD" dereferenced NULL pointer when merging + nothing into an unborn history (which is arguably unusual usage, + which perhaps was the reason why nobody noticed it). + + * When "git worktree" feature is in use, "git branch -d" allowed + deletion of a branch that is checked out in another worktree, + which was wrong. + + * When "git worktree" feature is in use, "git branch -m" renamed a + branch that is checked out in another worktree without adjusting + the HEAD symbolic ref for the worktree. + + * "git diff -M" used to work better when two originally identical + files A and B got renamed to X/A and X/B by pairing A to X/A and B + to X/B, but this was broken in the 2.0 timeframe. + + * "git send-pack --all <there>" was broken when its command line + option parsing was written in the 2.6 timeframe. + + * "git format-patch --help" showed `-s` and `--no-patch` as if these + are valid options to the command. We already hide `--patch` option + from the documentation, because format-patch is about showing the + diff, and the documentation now hides these options as well. + + * When running "git blame $path" with unnormalized data in the index + for the path, the data in the working tree was blamed, even though + "git add" would not have changed what is already in the index, due + to "safe crlf" that disables the line-end conversion. It has been + corrected. + + * A change back in version 2.7 to "git branch" broke display of a + symbolic ref in a non-standard place in the refs/ hierarchy (we + expect symbolic refs to appear in refs/remotes/*/HEAD to point at + the primary branch the remote has, and as .git/HEAD to point at the + branch we locally checked out). + + * A partial rewrite of "git submodule" in the 2.7 timeframe changed + the way the gitdir: pointer in the submodules point at the real + repository location to use absolute paths by accident. This has + been corrected. + + * "git commit" misbehaved in a few minor ways when an empty message + is given via -m '', all of which has been corrected. + + * Support for CRAM-MD5 authentication method in "git imap-send" did + not work well. + + * Upcoming OpenSSL 1.1.0 will break compilation by updating a few API + elements we use in imap-send, which has been adjusted for the change. + + * The socks5:// proxy support added back in 2.6.4 days was not aware + that socks5h:// proxies behave differently from socks5:// proxies. + + * "git config" had a codepath that tried to pass a NULL to + printf("%s"), which nobody seems to have noticed. + + * On Cygwin, object creation uses the "create a temporary and then + rename it to the final name" pattern, not "create a temporary, + hardlink it to the final name and then unlink the temporary" + pattern. + + This is necessary to use Git on Windows shared directories, and is + already enabled for the MinGW and plain Windows builds. It also + has been used in Cygwin packaged versions of Git for quite a while. + See http://thread.gmane.org/gmane.comp.version-control.git/291853 + + * "merge-octopus" strategy did not ensure that the index is clean + when merge begins. + + * When "git merge" notices that the merge can be resolved purely at + the tree level (without having to merge blobs) and the resulting + tree happens to already exist in the object store, it forgot to + update the index, which left an inconsistent state that would + break later operations. + + * "git submodule" reports the paths of submodules the command + recurses into, but these paths were incorrectly reported when + the command was not run from the root level of the superproject. + + * The "user.useConfigOnly" configuration variable makes it an error + if users do not explicitly set user.name and user.email. However, + its check was not done early enough and allowed another error to + trigger, reporting that the default value we guessed from the + system setting was unusable. This was a suboptimal end-user + experience as we want the users to set user.name/user.email without + relying on the auto-detection at all. + + * "git mv old new" did not adjust the path for a submodule that lives + as a subdirectory inside old/ directory correctly. + + * "git replace -e" did not honour "core.editor" configuration. + + * "git push" from a corrupt repository that attempts to push a large + number of refs deadlocked; the thread to relay rejection notices + for these ref updates blocked on writing them to the main thread, + after the main thread at the receiving end notices that the push + failed and decides not to read these notices and return a failure. + + * mmap emulation on Windows has been optimized and work better without + consuming paging store when not needed. + + * A question by "git send-email" to ask the identity of the sender + has been updated. + + * UI consistency improvements for "git mergetool". + + * "git rebase -m" could be asked to rebase an entire branch starting + from the root, but failed by assuming that there always is a parent + commit to the first commit on the branch. + + * Fix a broken "p4 lfs" test. + + * Recent update to Git LFS broke "git p4" by changing the output from + its "lfs pointer" subcommand. + + * "git fetch" test t5510 was flaky while running a (forced) automagic + garbage collection. + + * Documentation updates to help contributors setting up Travis CI + test for their patches. + + * Some multi-byte encoding can have a backslash byte as a later part + of one letter, which would confuse "highlight" filter used in + gitweb. + + * "git commit-tree" plumbing command required the user to always sign + its result when the user sets the commit.gpgsign configuration + variable, which was an ancient mistake. Rework "git rebase" that + relied on this mistake so that it reads commit.gpgsign and pass (or + not pass) the -S option to "git commit-tree" to keep the end-user + expectation the same, while teaching "git commit-tree" to ignore + the configuration variable. This will stop requiring the users to + sign commit objects used internally as an implementation detail of + "git stash". + + * "http.cookieFile" configuration variable clearly wants a pathname, + but we forgot to treat it as such by e.g. applying tilde expansion. + + * Consolidate description of tilde-expansion that is done to + configuration variables that take pathname to a single place. + + * Correct faulty recommendation to use "git submodule deinit ." when + de-initialising all submodules, which would result in a strange + error message in a pathological corner case. + + * Many 'linkgit:<git documentation page>' references were broken, + which are all fixed with this. + + * "git rerere" can get confused by conflict markers deliberately left + by the inner merge step, because they are indistinguishable from + the real conflict markers left by the outermost merge which are + what the end user and "rerere" need to look at. This was fixed by + making the conflict markers left by the inner merges a bit longer. + (merge 0f9fd5c jc/ll-merge-internal later to maint). + + * CI test was taught to build documentation pages. + + * "git fsck" learned to catch NUL byte in a commit object as + potential error and warn. + + * Portability enhancement for "rebase -i" to help platforms whose + shell does not like "for i in <empty>" (which is not POSIX-kosher). + + * On Windows, .git and optionally any files whose name starts with a + dot are now marked as hidden, with a core.hideDotFiles knob to + customize this behaviour. + + * Documentation for "git merge --verify-signatures" has been updated + to clarify that the signature of only the commit at the tip is + verified. Also the phrasing used for signature and key validity is + adjusted to align with that used by OpenPGP. + + * A couple of bugs around core.autocrlf have been fixed. + + * Many commands normalize command line arguments from NFD to NFC + variant of UTF-8 on OSX, but commands in the "diff" family did + not, causing "git diff $path" to complain that no such path is + known to Git. They have been taught to do the normalization. + + * "git difftool" learned to handle unmerged paths correctly in + dir-diff mode. + + * The "are we talking with TTY, doing an interactive session?" + detection has been updated to work better for "Git for Windows". + + * We forgot to add "git log --decorate=auto" to documentation when we + added the feature back in v2.1.0 timeframe. + (merge 462cbb4 rj/log-decorate-auto later to maint). + + * "git fast-import --export-marks" would overwrite the existing marks + file even when it makes a dump from its custom die routine. + Prevent it from doing so when we have an import-marks file but + haven't finished reading it. + (merge f4beed6 fc/fast-import-broken-marks-file later to maint). + + * "git rebase -i", after it fails to auto-resolve the conflict, had + an unnecessary call to "git rerere" from its very early days, which + was spotted recently; the call has been removed. + (merge 7063693 js/rebase-i-dedup-call-to-rerere later to maint). + + * Other minor clean-ups and documentation updates + (merge cd82b7a pa/cherry-pick-doc-typo later to maint). + (merge 2bb73ae rs/patch-id-use-skip-prefix later to maint). + (merge aa20cbc rs/apply-name-terminate later to maint). + (merge fe17fc0 jc/t2300-setup later to maint). + (merge e256eec jk/shell-portability later to maint). diff --git a/Documentation/RelNotes/2.9.1.txt b/Documentation/RelNotes/2.9.1.txt new file mode 100644 index 0000000000..369383b33d --- /dev/null +++ b/Documentation/RelNotes/2.9.1.txt @@ -0,0 +1,62 @@ +Git v2.9.1 Release Notes +======================== + +Fixes since v2.9 +---------------- + + * When "git daemon" is run without --[init-]timeout specified, a + connection from a client that silently goes offline can hang around + for a long time, wasting resources. The socket-level KEEPALIVE has + been enabled to allow the OS to notice such failed connections. + + * The commands in `git log` family take %C(auto) in a custom format + string. This unconditionally turned the color on, ignoring + --no-color or with --color=auto when the output is not connected to + a tty; this was corrected to make the format truly behave as + "auto". + + * "git rev-list --count" whose walk-length is limited with "-n" + option did not work well with the counting optimized to look at the + bitmap index. + + * "git show -W" (extend hunks to cover the entire function, delimited + by lines that match the "funcname" pattern) used to show the entire + file when a change added an entire function at the end of the file, + which has been fixed. + + * The documentation set has been updated so that literal commands, + configuration variables and environment variables are consistently + typeset in fixed-width font and bold in manpages. + + * "git svn propset" subcommand that was added in 2.3 days is + documented now. + + * The documentation tries to consistently spell "GPG"; when + referring to the specific program name, "gpg" is used. + + * "git reflog" stopped upon seeing an entry that denotes a branch + creation event (aka "unborn"), which made it appear as if the + reflog was truncated. + + * The git-prompt scriptlet (in contrib/) was not friendly with those + who uses "set -u", which has been fixed. + + * A codepath that used alloca(3) to place an unbounded amount of data + on the stack has been updated to avoid doing so. + + * "git update-index --add --chmod=+x file" may be usable as an escape + hatch, but not a friendly thing to force for people who do need to + use it regularly. "git add --chmod=+x file" can be used instead. + + * Build improvements for gnome-keyring (in contrib/) + + * "git status" used to say "working directory" when it meant "working + tree". + + * Comments about misbehaving FreeBSD shells have been clarified with + the version number (9.x and before are broken, newer ones are OK). + + * "git cherry-pick A" worked on an unborn branch, but "git + cherry-pick A..B" didn't. + +Also contains minor documentation updates and code clean-ups. diff --git a/Documentation/config.txt b/Documentation/config.txt index b945d67bc0..4f41840fdc 100644 --- a/Documentation/config.txt +++ b/Documentation/config.txt @@ -353,9 +353,9 @@ core.quotePath:: core.eol:: Sets the line ending type to use in the working directory for - files that have the `text` property set. Alternatives are - 'lf', 'crlf' and 'native', which uses the platform's native - line ending. The default value is `native`. See + files that have the `text` property set when core.autocrlf is false. + Alternatives are 'lf', 'crlf' and 'native', which uses the platform's + native line ending. The default value is `native`. See linkgit:gitattributes[5] for more information on end-of-line conversion. @@ -434,7 +434,7 @@ core.gitProxy:: may be set multiple times and is matched in the given order; the first match wins. + -Can be overridden by the 'GIT_PROXY_COMMAND' environment variable +Can be overridden by the `GIT_PROXY_COMMAND` environment variable (which always applies universally, without the special "for" handling). + @@ -478,9 +478,9 @@ false), while all other repositories are assumed to be bare (bare core.worktree:: Set the path to the root of the working tree. - If GIT_COMMON_DIR environment variable is set, core.worktree + If `GIT_COMMON_DIR` environment variable is set, core.worktree is ignored and not used for determining the root of working tree. - This can be overridden by the GIT_WORK_TREE environment + This can be overridden by the `GIT_WORK_TREE` environment variable and the '--work-tree' command-line option. The value can be an absolute path or relative to the path to the .git directory, which is either specified by --git-dir @@ -545,7 +545,7 @@ core.compression:: -1 is the zlib default. 0 means no compression, and 1..9 are various speed/size tradeoffs, 9 being slowest. If set, this provides a default to other compression variables, - such as 'core.looseCompression' and 'pack.compression'. + such as `core.looseCompression` and `pack.compression`. core.looseCompression:: An integer -1..9, indicating the compression level for objects that @@ -619,9 +619,9 @@ core.excludesFile:: core.askPass:: Some commands (e.g. svn and http interfaces) that interactively ask for a password can be told to use an external program given - via the value of this variable. Can be overridden by the 'GIT_ASKPASS' + via the value of this variable. Can be overridden by the `GIT_ASKPASS` environment variable. If not set, fall back to the value of the - 'SSH_ASKPASS' environment variable or, failing that, a simple password + `SSH_ASKPASS` environment variable or, failing that, a simple password prompt. The external program shall be given a suitable prompt as command-line argument and write the password on its STDOUT. @@ -633,6 +633,23 @@ core.attributesFile:: `$XDG_CONFIG_HOME/git/attributes`. If `$XDG_CONFIG_HOME` is either not set or empty, `$HOME/.config/git/attributes` is used instead. +core.hooksPath:: + By default Git will look for your hooks in the + '$GIT_DIR/hooks' directory. Set this to different path, + e.g. '/etc/git/hooks', and Git will try to find your hooks in + that directory, e.g. '/etc/git/hooks/pre-receive' instead of + in '$GIT_DIR/hooks/pre-receive'. ++ +The path can be either absolute or relative. A relative path is +taken as relative to the directory where the hooks are run (see +the "DESCRIPTION" section of linkgit:githooks[5]). ++ +This configuration variable is useful in cases where you'd like to +centrally configure your Git hooks instead of configuring them on a +per-repository basis, or as a more flexible and centralized +alternative to having an `init.templateDir` where you've changed +default hooks. + core.editor:: Commands such as `commit` and `tag` that lets you edit messages by launching an editor uses the value of this @@ -747,7 +764,7 @@ core.notesRef:: notes should be printed. + This setting defaults to "refs/notes/commits", and it can be overridden by -the 'GIT_NOTES_REF' environment variable. See linkgit:git-notes[1]. +the `GIT_NOTES_REF` environment variable. See linkgit:git-notes[1]. core.sparseCheckout:: Enable "sparse checkout" feature. See section "Sparse checkout" in @@ -783,7 +800,7 @@ it will be treated as a shell command. For example, defining "gitk --all --not ORIG_HEAD". Note that shell commands will be executed from the top-level directory of a repository, which may not necessarily be the current directory. -'GIT_PREFIX' is set as returned by running 'git rev-parse --show-prefix' +`GIT_PREFIX` is set as returned by running 'git rev-parse --show-prefix' from the original current directory. See linkgit:git-rev-parse[1]. am.keepcr:: @@ -1124,11 +1141,16 @@ commit.template:: Specify the pathname of a file to use as the template for new commit messages. +commit.verbose:: + A boolean or int to specify the level of verbose with `git commit`. + See linkgit:git-commit[1]. + credential.helper:: Specify an external helper to be called when a username or password credential is needed; the helper may consult external - storage to avoid prompting the user for the credentials. See - linkgit:gitcredentials[7] for details. + storage to avoid prompting the user for the credentials. Note + that multiple helpers may be defined. See linkgit:gitcredentials[7] + for details. credential.useHttpPath:: When acquiring credentials, consider the "path" component of an http @@ -1272,6 +1294,10 @@ format.outputDirectory:: Set a custom directory to store the resulting files instead of the current working directory. +format.useAutoBase:: + A boolean value which lets you enable the `--base=auto` option of + format-patch by default. + filter.<driver>.clean:: The command which is used to convert the content of a worktree file to a blob upon checkin. See linkgit:gitattributes[5] for @@ -1400,18 +1426,18 @@ gitcvs.usecrlfattr:: treat it as text. If they suppress text conversion, the file will be set with '-kb' mode, which suppresses any newline munging the client might otherwise do. If the attributes do not allow - the file type to be determined, then 'gitcvs.allBinary' is + the file type to be determined, then `gitcvs.allBinary` is used. See linkgit:gitattributes[5]. gitcvs.allBinary:: - This is used if 'gitcvs.usecrlfattr' does not resolve + This is used if `gitcvs.usecrlfattr` does not resolve the correct '-kb' mode to use. If true, all unresolved files are sent to the client in mode '-kb'. This causes the client to treat them as binary files, which suppresses any newline munging it otherwise might do. Alternatively, if it is set to "guess", then the contents of the file are examined to decide if - it is binary, similar to 'core.autocrlf'. + it is binary, similar to `core.autocrlf`. gitcvs.dbName:: Database used by git-cvsserver to cache revision information @@ -1430,7 +1456,7 @@ gitcvs.dbDriver:: See linkgit:git-cvsserver[1]. gitcvs.dbUser, gitcvs.dbPass:: - Database user and password. Only useful if setting 'gitcvs.dbDriver', + Database user and password. Only useful if setting `gitcvs.dbDriver`, since SQLite has no concept of database users and/or passwords. 'gitcvs.dbUser' supports variable substitution (see linkgit:git-cvsserver[1] for details). @@ -1442,8 +1468,8 @@ gitcvs.dbTableNamePrefix:: linkgit:git-cvsserver[1] for details). Any non-alphabetic characters will be replaced with underscores. -All gitcvs variables except for 'gitcvs.usecrlfattr' and -'gitcvs.allBinary' can also be specified as +All gitcvs variables except for `gitcvs.usecrlfattr` and +`gitcvs.allBinary` can also be specified as 'gitcvs.<access_method>.<varname>' (where 'access_method' is one of "ext" and "pserver") to make them apply only for the given access method. @@ -1476,7 +1502,7 @@ grep.patternType:: grep.extendedRegexp:: If set to true, enable '--extended-regexp' option by default. This - option is ignored when the 'grep.patternType' option is set to a value + option is ignored when the `grep.patternType` option is set to a value other than 'default'. grep.threads:: @@ -1561,7 +1587,7 @@ guitool.<name>.cmd:: of the linkgit:git-gui[1] `Tools` menu is invoked. This option is mandatory for every tool. The command is executed from the root of the working directory, and in the environment it receives the name of - the tool as 'GIT_GUITOOL', the name of the currently selected file as + the tool as `GIT_GUITOOL`, the name of the currently selected file as 'FILENAME', and the name of the current branch as 'CUR_BRANCH' (if the head is detached, 'CUR_BRANCH' is empty). @@ -1582,7 +1608,7 @@ guitool.<name>.confirm:: guitool.<name>.argPrompt:: Request a string argument from the user, and pass it to the tool - through the 'ARGS' environment variable. Since requesting an + through the `ARGS` environment variable. Since requesting an argument implies confirmation, the 'confirm' option has no effect if this is enabled. If the option is set to 'true', 'yes', or '1', the dialog uses a built-in generic prompt; otherwise the exact @@ -1590,7 +1616,7 @@ guitool.<name>.argPrompt:: guitool.<name>.revPrompt:: Request a single valid revision from the user, and set the - 'REVISION' environment variable. In other aspects this option + `REVISION` environment variable. In other aspects this option is similar to 'argPrompt', and can be used together with it. guitool.<name>.revUnmerged:: @@ -1646,7 +1672,7 @@ http.proxyAuthMethod:: only takes effect if the configured proxy string contains a user name part (i.e. is of the form 'user@host' or 'user@host:port'). This can be overridden on a per-remote basis; see `remote.<name>.proxyAuthMethod`. - Both can be overridden by the 'GIT_HTTP_PROXY_AUTHMETHOD' environment + Both can be overridden by the `GIT_HTTP_PROXY_AUTHMETHOD` environment variable. Possible values are: + -- @@ -1668,6 +1694,12 @@ http.emptyAuth:: a username in the URL, as libcurl normally requires a username for authentication. +http.extraHeader:: + Pass an additional HTTP header when communicating with a server. If + more than one such entry exists, all of them are added as extra + headers. To allow overriding the settings inherited from the system + config, an empty value will reset the extra headers to the empty list. + http.cookieFile:: The pathname of a file containing previously stored cookie lines, which should be used @@ -1699,9 +1731,9 @@ http.sslVersion:: - tlsv1.2 + -Can be overridden by the 'GIT_SSL_VERSION' environment variable. +Can be overridden by the `GIT_SSL_VERSION` environment variable. To force git to use libcurl's default ssl version and ignore any -explicit http.sslversion option, set 'GIT_SSL_VERSION' to the +explicit http.sslversion option, set `GIT_SSL_VERSION` to the empty string. http.sslCipherList:: @@ -1712,41 +1744,41 @@ http.sslCipherList:: option; see the libcurl documentation for more details on the format of this list. + -Can be overridden by the 'GIT_SSL_CIPHER_LIST' environment variable. +Can be overridden by the `GIT_SSL_CIPHER_LIST` environment variable. To force git to use libcurl's default cipher list and ignore any -explicit http.sslCipherList option, set 'GIT_SSL_CIPHER_LIST' to the +explicit http.sslCipherList option, set `GIT_SSL_CIPHER_LIST` to the empty string. http.sslVerify:: Whether to verify the SSL certificate when fetching or pushing - over HTTPS. Can be overridden by the 'GIT_SSL_NO_VERIFY' environment + over HTTPS. Can be overridden by the `GIT_SSL_NO_VERIFY` environment variable. http.sslCert:: File containing the SSL certificate when fetching or pushing - over HTTPS. Can be overridden by the 'GIT_SSL_CERT' environment + over HTTPS. Can be overridden by the `GIT_SSL_CERT` environment variable. http.sslKey:: File containing the SSL private key when fetching or pushing - over HTTPS. Can be overridden by the 'GIT_SSL_KEY' environment + over HTTPS. Can be overridden by the `GIT_SSL_KEY` environment variable. http.sslCertPasswordProtected:: Enable Git's password prompt for the SSL certificate. Otherwise OpenSSL will prompt the user, possibly many times, if the certificate or private key is encrypted. Can be overridden by the - 'GIT_SSL_CERT_PASSWORD_PROTECTED' environment variable. + `GIT_SSL_CERT_PASSWORD_PROTECTED` environment variable. http.sslCAInfo:: File containing the certificates to verify the peer with when fetching or pushing over HTTPS. Can be overridden by the - 'GIT_SSL_CAINFO' environment variable. + `GIT_SSL_CAINFO` environment variable. http.sslCAPath:: Path containing files with the CA certificates to verify the peer with when fetching or pushing over HTTPS. Can be overridden - by the 'GIT_SSL_CAPATH' environment variable. + by the `GIT_SSL_CAPATH` environment variable. http.pinnedpubkey:: Public key of the https service. It may either be the filename of @@ -1766,7 +1798,7 @@ http.sslTry:: http.maxRequests:: How many HTTP requests to launch in parallel. Can be overridden - by the 'GIT_HTTP_MAX_REQUESTS' environment variable. Default is 5. + by the `GIT_HTTP_MAX_REQUESTS` environment variable. Default is 5. http.minSessions:: The number of curl sessions (counted across slots) to be kept across @@ -1785,13 +1817,13 @@ http.postBuffer:: http.lowSpeedLimit, http.lowSpeedTime:: If the HTTP transfer speed is less than 'http.lowSpeedLimit' for longer than 'http.lowSpeedTime' seconds, the transfer is aborted. - Can be overridden by the 'GIT_HTTP_LOW_SPEED_LIMIT' and - 'GIT_HTTP_LOW_SPEED_TIME' environment variables. + Can be overridden by the `GIT_HTTP_LOW_SPEED_LIMIT` and + `GIT_HTTP_LOW_SPEED_TIME` environment variables. http.noEPSV:: A boolean which disables using of EPSV ftp command by curl. This can helpful with some "poor" ftp servers which don't - support EPSV mode. Can be overridden by the 'GIT_CURL_FTP_NO_EPSV' + support EPSV mode. Can be overridden by the `GIT_CURL_FTP_NO_EPSV` environment variable. Default is false (curl will use EPSV). http.userAgent:: @@ -1801,7 +1833,7 @@ http.userAgent:: such as Mozilla/4.0. This may be necessary, for instance, if connecting through a firewall that restricts HTTP connections to a set of common USER_AGENT strings (but not including those like git/1.7.1). - Can be overridden by the 'GIT_HTTP_USER_AGENT' environment variable. + Can be overridden by the `GIT_HTTP_USER_AGENT` environment variable. http.<url>.*:: Any of the http.* options above can be applied selectively to some URLs. @@ -1901,6 +1933,14 @@ interactive.singleKey:: setting is silently ignored if portable keystroke input is not available; requires the Perl module Term::ReadKey. +interactive.diffFilter:: + When an interactive command (such as `git add --patch`) shows + a colorized diff, git will pipe the diff through the shell + command defined by this configuration variable. The command may + mark up the diff further for human consumption, provided that it + retains a one-to-one correspondence with the lines in the + original diff. Defaults to disabled (no filtering). + log.abbrevCommit:: If true, makes linkgit:git-log[1], linkgit:git-show[1], and linkgit:git-whatchanged[1] assume `--abbrev-commit`. You may @@ -1916,7 +1956,10 @@ log.decorate:: command. If 'short' is specified, the ref name prefixes 'refs/heads/', 'refs/tags/' and 'refs/remotes/' will not be printed. If 'full' is specified, the full ref name (including prefix) will be printed. - This is the same as the log commands '--decorate' option. + If 'auto' is specified, then if the output is going to a terminal, + the ref names are shown as if 'short' were given, otherwise no ref + names are shown. This is the same as the '--decorate' option + of the `git log`. log.follow:: If `true`, `git log` will act as if the `--follow` option was used when @@ -2587,7 +2630,7 @@ sendemail.identity:: A configuration identity. When given, causes values in the 'sendemail.<identity>' subsection to take precedence over values in the 'sendemail' section. The default identity is - the value of 'sendemail.identity'. + the value of `sendemail.identity`. sendemail.smtpEncryption:: See linkgit:git-send-email[1] for description. Note that this @@ -2604,7 +2647,7 @@ sendemail.<identity>.*:: Identity-specific versions of the 'sendemail.*' parameters found below, taking precedence over those when the this identity is selected, through command-line or - 'sendemail.identity'. + `sendemail.identity`. sendemail.aliasesFile:: sendemail.aliasFileType:: @@ -2634,7 +2677,7 @@ sendemail.xmailer:: See linkgit:git-send-email[1] for description. sendemail.signedoffcc (deprecated):: - Deprecated alias for 'sendemail.signedoffbycc'. + Deprecated alias for `sendemail.signedoffbycc`. showbranch.default:: The default set of branches for linkgit:git-show-branch[1]. @@ -2748,6 +2791,17 @@ submodule.<name>.ignore:: "--ignore-submodules" option. The 'git submodule' commands are not affected by this setting. +submodule.fetchJobs:: + Specifies how many submodules are fetched/cloned at the same time. + A positive integer allows up to that number of submodules fetched + in parallel. A value of 0 will give some reasonable default. + If unset, it defaults to 1. + +tag.forceSignAnnotated:: + A boolean to specify whether annotated tags created should be GPG signed. + If `--annotate` is specified on the command line, it takes + precedence over this option. + tag.sort:: This variable controls the sort ordering of tags when displayed by linkgit:git-tag[1]. Without the "--sort=<value>" option provided, the @@ -2855,17 +2909,17 @@ url.<base>.pushInsteadOf:: user.email:: Your email address to be recorded in any newly created commits. - Can be overridden by the 'GIT_AUTHOR_EMAIL', 'GIT_COMMITTER_EMAIL', and - 'EMAIL' environment variables. See linkgit:git-commit-tree[1]. + Can be overridden by the `GIT_AUTHOR_EMAIL`, `GIT_COMMITTER_EMAIL`, and + `EMAIL` environment variables. See linkgit:git-commit-tree[1]. user.name:: Your full name to be recorded in any newly created commits. - Can be overridden by the 'GIT_AUTHOR_NAME' and 'GIT_COMMITTER_NAME' + Can be overridden by the `GIT_AUTHOR_NAME` and `GIT_COMMITTER_NAME` environment variables. See linkgit:git-commit-tree[1]. user.useConfigOnly:: - Instruct Git to avoid trying to guess defaults for 'user.email' - and 'user.name', and instead retrieve the values only from the + Instruct Git to avoid trying to guess defaults for `user.email` + and `user.name`, and instead retrieve the values only from the configuration. For example, if you have multiple email addresses and would like to use a different one for each repository, then with this configuration option set to `true` in the global config diff --git a/Documentation/date-formats.txt b/Documentation/date-formats.txt index ccd1fc8122..35e8da2010 100644 --- a/Documentation/date-formats.txt +++ b/Documentation/date-formats.txt @@ -1,7 +1,7 @@ DATE FORMATS ------------ -The GIT_AUTHOR_DATE, GIT_COMMITTER_DATE environment variables +The `GIT_AUTHOR_DATE`, `GIT_COMMITTER_DATE` environment variables ifdef::git-commit[] and the `--date` option endif::git-commit[] diff --git a/Documentation/diff-config.txt b/Documentation/diff-config.txt index 6eaa45271c..f1101c7b21 100644 --- a/Documentation/diff-config.txt +++ b/Documentation/diff-config.txt @@ -75,7 +75,7 @@ diff.ignoreSubmodules:: commands such as 'git diff-files'. 'git checkout' also honors this setting when reporting uncommitted changes. Setting it to 'all' disables the submodule summary normally shown by 'git commit' - and 'git status' when 'status.submoduleSummary' is set unless it is + and 'git status' when `status.submoduleSummary` is set unless it is overridden by using the --ignore-submodules command-line option. The 'git submodule' commands are not affected by this setting. @@ -108,9 +108,13 @@ diff.renameLimit:: detection; equivalent to the 'git diff' option '-l'. diff.renames:: - Tells Git to detect renames. If set to any boolean value, it - will enable basic rename detection. If set to "copies" or - "copy", it will detect copies, as well. + Whether and how Git detects renames. If set to "false", + rename detection is disabled. If set to "true", basic rename + detection is enabled. If set to "copies" or "copy", Git will + detect copies, as well. Defaults to true. Note that this + affects only 'git diff' Porcelain like linkgit:git-diff[1] and + linkgit:git-log[1], and not lower level commands such as + linkgit:git-diff-files[1]. diff.suppressBlankEmpty:: A boolean to inhibit the standard behavior of printing a space @@ -166,6 +170,11 @@ diff.tool:: include::mergetools-diff.txt[] +diff.compactionHeuristic:: + Set this option to `true` to enable an experimental heuristic that + shifts the hunk boundary in an attempt to make the resulting + patch easier to read. + diff.algorithm:: Choose a diff algorithm. The variants are as follows: + diff --git a/Documentation/diff-generate-patch.txt b/Documentation/diff-generate-patch.txt index bcf54da82a..c91afee21c 100644 --- a/Documentation/diff-generate-patch.txt +++ b/Documentation/diff-generate-patch.txt @@ -6,7 +6,7 @@ with a '-p' option, "git diff" without the '--raw' option, or "git log" with the "-p" option, they do not produce the output described above; instead they produce a patch file. You can customize the creation of such patches via the -GIT_EXTERNAL_DIFF and the GIT_DIFF_OPTS environment variables. +`GIT_EXTERNAL_DIFF` and the `GIT_DIFF_OPTS` environment variables. What the -p option produces is slightly different from the traditional diff format: diff --git a/Documentation/diff-options.txt b/Documentation/diff-options.txt index 3cb301556e..d9ae681d8f 100644 --- a/Documentation/diff-options.txt +++ b/Documentation/diff-options.txt @@ -63,6 +63,13 @@ ifndef::git-format-patch[] Synonym for `-p --raw`. endif::git-format-patch[] +--compaction-heuristic:: +--no-compaction-heuristic:: + These are to help debugging and tuning an experimental + heuristic (which is off by default) that shifts the hunk + boundary in an attempt to make the resulting patch easier + to read. + --minimal:: Spend extra time to make sure the smallest possible diff is produced. diff --git a/Documentation/fetch-options.txt b/Documentation/fetch-options.txt index 036edfb099..b05a8341e8 100644 --- a/Documentation/fetch-options.txt +++ b/Documentation/fetch-options.txt @@ -52,7 +52,7 @@ ifndef::git-pull[] -p:: --prune:: - After fetching, remove any remote-tracking references that no + Before fetching, remove any remote-tracking references that no longer exist on the remote. Tags are not subject to pruning if they are fetched only because of the default tag auto-following or due to a --tags option. However, if tags diff --git a/Documentation/git-bisect-lk2009.txt b/Documentation/git-bisect-lk2009.txt index c06efbd42a..e015f5b3cc 100644 --- a/Documentation/git-bisect-lk2009.txt +++ b/Documentation/git-bisect-lk2009.txt @@ -366,7 +366,7 @@ skip" to do the same thing. (In fact the special exit code 125 makes Or if you want more control, you can inspect the current state using for example "git bisect visualize". It will launch gitk (or "git log" -if the DISPLAY environment variable is not set) to help you find a +if the `DISPLAY` environment variable is not set) to help you find a better bisection point. Either way, if you have a string of untestable commits, it might diff --git a/Documentation/git-bisect.txt b/Documentation/git-bisect.txt index 7e79aaedeb..d9f960b509 100644 --- a/Documentation/git-bisect.txt +++ b/Documentation/git-bisect.txt @@ -205,7 +205,7 @@ $ git bisect visualize `view` may also be used as a synonym for `visualize`. -If the 'DISPLAY' environment variable is not set, 'git log' is used +If the `DISPLAY` environment variable is not set, 'git log' is used instead. You can also give command-line options such as `-p` and `--stat`. diff --git a/Documentation/git-cherry-pick.txt b/Documentation/git-cherry-pick.txt index 6154e57238..c104a594af 100644 --- a/Documentation/git-cherry-pick.txt +++ b/Documentation/git-cherry-pick.txt @@ -128,7 +128,7 @@ effect to your index in a row. --allow-empty-message:: By default, cherry-picking a commit with an empty message will fail. - This option overrides that behaviour, allowing commits with empty + This option overrides that behavior, allowing commits with empty messages to be cherry picked. --keep-redundant-commits:: diff --git a/Documentation/git-clone.txt b/Documentation/git-clone.txt index b7c467a001..ec41d3d698 100644 --- a/Documentation/git-clone.txt +++ b/Documentation/git-clone.txt @@ -14,8 +14,8 @@ SYNOPSIS [-o <name>] [-b <name>] [-u <upload-pack>] [--reference <repository>] [--dissociate] [--separate-git-dir <git dir>] [--depth <depth>] [--[no-]single-branch] - [--recursive | --recurse-submodules] [--] <repository> - [<directory>] + [--recursive | --recurse-submodules] [--[no-]shallow-submodules] + [--jobs <n>] [--] <repository> [<directory>] DESCRIPTION ----------- @@ -191,7 +191,8 @@ objects from the source repository into a pack in the cloned repository. Create a 'shallow' clone with a history truncated to the specified number of commits. Implies `--single-branch` unless `--no-single-branch` is given to fetch the histories near the - tips of all branches. + tips of all branches. If you want to clone submodules shallowly, + also pass `--shallow-submodules`. --[no-]single-branch:: Clone only the history leading to the tip of a single branch, @@ -212,6 +213,9 @@ objects from the source repository into a pack in the cloned repository. repository does not have a worktree/checkout (i.e. if any of `--no-checkout`/`-n`, `--bare`, or `--mirror` is given) +--[no-]shallow-submodules:: + All submodules which are cloned will be shallow with a depth of 1. + --separate-git-dir=<git dir>:: Instead of placing the cloned repository where it is supposed to be, place the cloned repository at the specified directory, @@ -219,6 +223,10 @@ objects from the source repository into a pack in the cloned repository. The result is Git repository can be separated from working tree. +-j <n>:: +--jobs <n>:: + The number of submodules fetched at the same time. + Defaults to the `submodule.fetchJobs` option. <repository>:: The (possibly remote) repository to clone from. See the diff --git a/Documentation/git-commit-tree.txt b/Documentation/git-commit-tree.txt index 48c33d7ed7..cb69faab68 100644 --- a/Documentation/git-commit-tree.txt +++ b/Documentation/git-commit-tree.txt @@ -61,8 +61,8 @@ OPTIONS stuck to the option without a space. --no-gpg-sign:: - Countermand `commit.gpgSign` configuration variable that is - set to force each and every commit to be signed. + Do not GPG-sign commit, to countermand a `--gpg-sign` option + given earlier on the command line. Commit Information diff --git a/Documentation/git-commit.txt b/Documentation/git-commit.txt index 9ec6b3cc17..e7049537d9 100644 --- a/Documentation/git-commit.txt +++ b/Documentation/git-commit.txt @@ -201,7 +201,7 @@ default:: Otherwise `whitespace`. -- + -The default can be changed by the 'commit.cleanup' configuration +The default can be changed by the `commit.cleanup` configuration variable (see linkgit:git-config[1]). -e:: @@ -290,7 +290,8 @@ configuration variable documented in linkgit:git-config[1]. what changes the commit has. Note that this diff output doesn't have its lines prefixed with '#'. This diff will not be a part - of the commit message. + of the commit message. See the `commit.verbose` configuration + variable in linkgit:git-config[1]. + If specified twice, show in addition the unified diff between what would be committed and the worktree files, i.e. the unstaged @@ -449,8 +450,8 @@ include::i18n.txt[] ENVIRONMENT AND CONFIGURATION VARIABLES --------------------------------------- The editor used to edit the commit log message will be chosen from the -GIT_EDITOR environment variable, the core.editor configuration variable, the -VISUAL environment variable, or the EDITOR environment variable (in that +`GIT_EDITOR` environment variable, the core.editor configuration variable, the +`VISUAL` environment variable, or the `EDITOR` environment variable (in that order). See linkgit:git-var[1] for details. HOOKS diff --git a/Documentation/git-config.txt b/Documentation/git-config.txt index 6843114fc0..a89c304916 100644 --- a/Documentation/git-config.txt +++ b/Documentation/git-config.txt @@ -269,7 +269,7 @@ and '--unset'. *'git config' will only ever change one file at a time*. You can override these rules either by command-line options or by environment variables. The '--global' and the '--system' options will limit the file used -to the global or system-wide file respectively. The GIT_CONFIG environment +to the global or system-wide file respectively. The `GIT_CONFIG` environment variable has a similar effect, but you can specify any filename you want. diff --git a/Documentation/git-daemon.txt b/Documentation/git-daemon.txt index a69b3616ec..dc20275825 100644 --- a/Documentation/git-daemon.txt +++ b/Documentation/git-daemon.txt @@ -188,7 +188,7 @@ Git configuration files in that directory are readable by `<user>`. arguments. The external command can decide to decline the service by exiting with a non-zero status (or to allow it by exiting with a zero status). It can also look at the $REMOTE_ADDR - and $REMOTE_PORT environment variables to learn about the + and `$REMOTE_PORT` environment variables to learn about the requestor when making this decision. + The external command can optionally write a single line to its diff --git a/Documentation/git-filter-branch.txt b/Documentation/git-filter-branch.txt index 003731f6a9..bd560d38d9 100644 --- a/Documentation/git-filter-branch.txt +++ b/Documentation/git-filter-branch.txt @@ -61,7 +61,7 @@ Filters The filters are applied in the order as listed below. The <command> argument is always evaluated in the shell context using the 'eval' command (with the notable exception of the commit filter, for technical reasons). -Prior to that, the $GIT_COMMIT environment variable will be set to contain +Prior to that, the `$GIT_COMMIT` environment variable will be set to contain the id of the commit being rewritten. Also, GIT_AUTHOR_NAME, GIT_AUTHOR_EMAIL, GIT_AUTHOR_DATE, GIT_COMMITTER_NAME, GIT_COMMITTER_EMAIL, and GIT_COMMITTER_DATE are taken from the current commit and exported to diff --git a/Documentation/git-format-patch.txt b/Documentation/git-format-patch.txt index 6821441d7d..9624c84a65 100644 --- a/Documentation/git-format-patch.txt +++ b/Documentation/git-format-patch.txt @@ -58,7 +58,7 @@ output, unless the `--stdout` option is specified. If `-o` is specified, output files are created in <dir>. Otherwise they are created in the current working directory. The default path -can be set with the 'format.outputDirectory' configuration option. +can be set with the `format.outputDirectory` configuration option. The `-o` option takes precedence over `format.outputDirectory`. To store patches in the current working directory even when `format.outputDirectory` points elsewhere, use `-o .`. @@ -146,9 +146,9 @@ series, where the head is chosen from the cover letter, the `--in-reply-to`, and the first patch mail, in this order. 'deep' threading makes every mail a reply to the previous one. + -The default is `--no-thread`, unless the 'format.thread' configuration +The default is `--no-thread`, unless the `format.thread` configuration is set. If `--thread` is specified without a style, it defaults to the -style specified by 'format.thread' if any, or else `shallow`. +style specified by `format.thread` if any, or else `shallow`. + Beware that the default for 'git send-email' is to thread emails itself. If you want `git format-patch` to take care of threading, you @@ -265,6 +265,11 @@ you can use `--suffix=-patch` to get `0001-description-of-my-change-patch`. Output an all-zero hash in each patch's From header instead of the hash of the commit. +--base=<commit>:: + Record the base tree information to identify the state the + patch series applies to. See the BASE TREE INFORMATION section + below for details. + --root:: Treat the revision argument as a <revision range>, even if it is just a single commit (that would normally be treated as a @@ -520,6 +525,61 @@ This should help you to submit patches inline using KMail. 5. Back in the compose window: add whatever other text you wish to the message, complete the addressing and subject fields, and press send. +BASE TREE INFORMATION +--------------------- + +The base tree information block is used for maintainers or third party +testers to know the exact state the patch series applies to. It consists +of the 'base commit', which is a well-known commit that is part of the +stable part of the project history everybody else works off of, and zero +or more 'prerequisite patches', which are well-known patches in flight +that is not yet part of the 'base commit' that need to be applied on top +of 'base commit' in topological order before the patches can be applied. + +The 'base commit' is shown as "base-commit: " followed by the 40-hex of +the commit object name. A 'prerequisite patch' is shown as +"prerequisite-patch-id: " followed by the 40-hex 'patch id', which can +be obtained by passing the patch through the `git patch-id --stable` +command. + +Imagine that on top of the public commit P, you applied well-known +patches X, Y and Z from somebody else, and then built your three-patch +series A, B, C, the history would be like: + +................................................ +---P---X---Y---Z---A---B---C +................................................ + +With `git format-patch --base=P -3 C` (or variants thereof, e.g. with +`--cover-letter` of using `Z..C` instead of `-3 C` to specify the +range), the base tree information block is shown at the end of the +first message the command outputs (either the first patch, or the +cover letter), like this: + +------------ +base-commit: P +prerequisite-patch-id: X +prerequisite-patch-id: Y +prerequisite-patch-id: Z +------------ + +For non-linear topology, such as + +................................................ +---P---X---A---M---C + \ / + Y---Z---B +................................................ + +You can also use `git format-patch --base=P -3 C` to generate patches +for A, B and C, and the identifiers for P, X, Y, Z are appended at the +end of the first message. + +If set `--base=auto` in cmdline, it will track base commit automatically, +the base commit will be the merge base of tip commit of the remote-tracking +branch and revision-range specified in cmdline. +For a local branch, you need to track a remote branch by `git branch +--set-upstream-to` before using this option. EXAMPLES -------- diff --git a/Documentation/git-gc.txt b/Documentation/git-gc.txt index fa1510480a..bed60f471c 100644 --- a/Documentation/git-gc.txt +++ b/Documentation/git-gc.txt @@ -82,13 +82,13 @@ automatic consolidation of packs. Configuration ------------- -The optional configuration variable 'gc.reflogExpire' can be +The optional configuration variable `gc.reflogExpire` can be set to indicate how long historical entries within each branch's reflog should remain available in this repository. The setting is expressed as a length of time, for example '90 days' or '3 months'. It defaults to '90 days'. -The optional configuration variable 'gc.reflogExpireUnreachable' +The optional configuration variable `gc.reflogExpireUnreachable` can be set to indicate how long historical reflog entries which are not part of the current branch should remain available in this repository. These types of entries are generally created as @@ -107,30 +107,30 @@ branches: reflogExpireUnreachable = 3 days ------------ -The optional configuration variable 'gc.rerereResolved' indicates +The optional configuration variable `gc.rerereResolved` indicates how long records of conflicted merge you resolved earlier are kept. This defaults to 60 days. -The optional configuration variable 'gc.rerereUnresolved' indicates +The optional configuration variable `gc.rerereUnresolved` indicates how long records of conflicted merge you have not resolved are kept. This defaults to 15 days. -The optional configuration variable 'gc.packRefs' determines if +The optional configuration variable `gc.packRefs` determines if 'git gc' runs 'git pack-refs'. This can be set to "notbare" to enable it within all non-bare repos or it can be set to a boolean value. This defaults to true. -The optional configuration variable 'gc.aggressiveWindow' controls how +The optional configuration variable `gc.aggressiveWindow` controls how much time is spent optimizing the delta compression of the objects in the repository when the --aggressive option is specified. The larger the value, the more time is spent optimizing the delta compression. See the documentation for the --window' option in linkgit:git-repack[1] for more details. This defaults to 250. -Similarly, the optional configuration variable 'gc.aggressiveDepth' +Similarly, the optional configuration variable `gc.aggressiveDepth` controls --depth option in linkgit:git-repack[1]. This defaults to 250. -The optional configuration variable 'gc.pruneExpire' controls how old +The optional configuration variable `gc.pruneExpire` controls how old the unreferenced loose objects have to be before they are pruned. The default is "2 weeks ago". diff --git a/Documentation/git-grep.txt b/Documentation/git-grep.txt index cb0f6cf678..40cfe37d00 100644 --- a/Documentation/git-grep.txt +++ b/Documentation/git-grep.txt @@ -51,7 +51,7 @@ grep.patternType:: grep.extendedRegexp:: If set to true, enable '--extended-regexp' option by default. This - option is ignored when the 'grep.patternType' option is set to a value + option is ignored when the `grep.patternType` option is set to a value other than 'default'. grep.threads:: diff --git a/Documentation/git-help.txt b/Documentation/git-help.txt index 3956525218..338b8d61ce 100644 --- a/Documentation/git-help.txt +++ b/Documentation/git-help.txt @@ -57,10 +57,10 @@ OPTIONS --man:: Display manual page for the command in the 'man' format. This option may be used to override a value set in the - 'help.format' configuration variable. + `help.format` configuration variable. + By default the 'man' program will be used to display the manual page, -but the 'man.viewer' configuration variable may be used to choose +but the `man.viewer` configuration variable may be used to choose other display programs (see below). -w:: @@ -69,7 +69,7 @@ other display programs (see below). format. A web browser will be used for that purpose. + The web browser can be specified using the configuration variable -'help.browser', or 'web.browser' if the former is not set. If none of +`help.browser`, or `web.browser` if the former is not set. If none of these config variables is set, the 'git web{litdd}browse' helper script (called by 'git help') will pick a suitable default. See linkgit:git-web{litdd}browse[1] for more information about this. @@ -80,7 +80,7 @@ CONFIGURATION VARIABLES help.format ~~~~~~~~~~~ -If no command-line option is passed, the 'help.format' configuration +If no command-line option is passed, the `help.format` configuration variable will be checked. The following values are supported for this variable; they make 'git help' behave as their corresponding command- line option: @@ -92,7 +92,7 @@ line option: help.browser, web.browser and browser.<tool>.path ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -The 'help.browser', 'web.browser' and 'browser.<tool>.path' will also +The `help.browser`, `web.browser` and `browser.<tool>.path` will also be checked if the 'web' format is chosen (either by command-line option or configuration variable). See '-w|--web' in the OPTIONS section above and linkgit:git-web{litdd}browse[1]. @@ -100,7 +100,7 @@ section above and linkgit:git-web{litdd}browse[1]. man.viewer ~~~~~~~~~~ -The 'man.viewer' configuration variable will be checked if the 'man' +The `man.viewer` configuration variable will be checked if the 'man' format is chosen. The following values are currently supported: * "man": use the 'man' program as usual, @@ -110,9 +110,9 @@ format is chosen. The following values are currently supported: tab (see 'Note about konqueror' below). Values for other tools can be used if there is a corresponding -'man.<tool>.cmd' configuration entry (see below). +`man.<tool>.cmd` configuration entry (see below). -Multiple values may be given to the 'man.viewer' configuration +Multiple values may be given to the `man.viewer` configuration variable. Their corresponding programs will be tried in the order listed in the configuration file. @@ -128,14 +128,14 @@ will try to use konqueror first. But this may fail (for example, if DISPLAY is not set) and in that case emacs' woman mode will be tried. If everything fails, or if no viewer is configured, the viewer specified -in the GIT_MAN_VIEWER environment variable will be tried. If that +in the `GIT_MAN_VIEWER` environment variable will be tried. If that fails too, the 'man' program will be tried anyway. man.<tool>.path ~~~~~~~~~~~~~~~ You can explicitly provide a full path to your preferred man viewer by -setting the configuration variable 'man.<tool>.path'. For example, you +setting the configuration variable `man.<tool>.path`. For example, you can configure the absolute path to konqueror by setting 'man.konqueror.path'. Otherwise, 'git help' assumes the tool is available in PATH. @@ -143,9 +143,9 @@ available in PATH. man.<tool>.cmd ~~~~~~~~~~~~~~ -When the man viewer, specified by the 'man.viewer' configuration +When the man viewer, specified by the `man.viewer` configuration variables, is not among the supported ones, then the corresponding -'man.<tool>.cmd' configuration variable will be looked up. If this +`man.<tool>.cmd` configuration variable will be looked up. If this variable exists then the specified tool will be treated as a custom command and a shell eval will be used to run the command with the man page passed as arguments. @@ -153,7 +153,7 @@ page passed as arguments. Note about konqueror ~~~~~~~~~~~~~~~~~~~~ -When 'konqueror' is specified in the 'man.viewer' configuration +When 'konqueror' is specified in the `man.viewer` configuration variable, we launch 'kfmclient' to try to open the man page on an already opened konqueror in a new tab if possible. diff --git a/Documentation/git-http-backend.txt b/Documentation/git-http-backend.txt index 9268fb6b1e..bb0db195ce 100644 --- a/Documentation/git-http-backend.txt +++ b/Documentation/git-http-backend.txt @@ -21,7 +21,7 @@ pushing using the smart HTTP protocol. It verifies that the directory has the magic file "git-daemon-export-ok", and it will refuse to export any Git directory that hasn't explicitly been marked for export this way (unless the -GIT_HTTP_EXPORT_ALL environmental variable is set). +`GIT_HTTP_EXPORT_ALL` environmental variable is set). By default, only the `upload-pack` service is enabled, which serves 'git fetch-pack' and 'git ls-remote' clients, which are invoked from @@ -241,7 +241,7 @@ $HTTP["url"] =~ "^/git/private" { ENVIRONMENT ----------- -'git http-backend' relies upon the CGI environment variables set +'git http-backend' relies upon the `CGI` environment variables set by the invoking web server, including: * PATH_INFO (if GIT_PROJECT_ROOT is set, otherwise PATH_TRANSLATED) @@ -251,7 +251,7 @@ by the invoking web server, including: * QUERY_STRING * REQUEST_METHOD -The GIT_HTTP_EXPORT_ALL environmental variable may be passed to +The `GIT_HTTP_EXPORT_ALL` environmental variable may be passed to 'git-http-backend' to bypass the check for the "git-daemon-export-ok" file in each repository before allowing export of that repository. @@ -269,7 +269,7 @@ GIT_COMMITTER_EMAIL to '$\{REMOTE_USER}@http.$\{REMOTE_ADDR\}', ensuring that any reflogs created by 'git-receive-pack' contain some identifying information of the remote user who performed the push. -All CGI environment variables are available to each of the hooks +All `CGI` environment variables are available to each of the hooks invoked by the 'git-receive-pack'. GIT diff --git a/Documentation/git-init.txt b/Documentation/git-init.txt index 8174d27efd..9d27197de8 100644 --- a/Documentation/git-init.txt +++ b/Documentation/git-init.txt @@ -47,7 +47,7 @@ Only print error and warning messages; all other output will be suppressed. --bare:: -Create a bare repository. If GIT_DIR environment is not set, it is set to the +Create a bare repository. If `GIT_DIR` environment is not set, it is set to the current working directory. --template=<template_directory>:: @@ -130,7 +130,12 @@ The template directory will be one of the following (in order): - the default template directory: `/usr/share/git-core/templates`. The default template directory includes some directory structure, suggested -"exclude patterns" (see linkgit:gitignore[5]), and sample hook files (see linkgit:githooks[5]). +"exclude patterns" (see linkgit:gitignore[5]), and sample hook files. + +The sample hooks are all disabled by default, To enable one of the +sample hooks rename it by removing its `.sample` suffix. + +See linkgit:githooks[5] for more general info on hook execution. EXAMPLES -------- diff --git a/Documentation/git-instaweb.txt b/Documentation/git-instaweb.txt index cc75b25022..e8ecdbf927 100644 --- a/Documentation/git-instaweb.txt +++ b/Documentation/git-instaweb.txt @@ -80,8 +80,8 @@ You may specify configuration in your .git/config ----------------------------------------------------------------------- -If the configuration variable 'instaweb.browser' is not set, -'web.browser' will be used instead if it is defined. See +If the configuration variable `instaweb.browser` is not set, +`web.browser` will be used instead if it is defined. See linkgit:git-web{litdd}browse[1] for more information about this. SEE ALSO diff --git a/Documentation/git-log.txt b/Documentation/git-log.txt index 03f958029a..4a6c47f843 100644 --- a/Documentation/git-log.txt +++ b/Documentation/git-log.txt @@ -29,12 +29,14 @@ OPTIONS (works only for a single file). --no-decorate:: ---decorate[=short|full|no]:: +--decorate[=short|full|auto|no]:: Print out the ref names of any commits that are shown. If 'short' is specified, the ref name prefixes 'refs/heads/', 'refs/tags/' and 'refs/remotes/' will not be printed. If 'full' is specified, the - full ref name (including prefix) will be printed. The default option - is 'short'. + full ref name (including prefix) will be printed. If 'auto' is + specified, then if the output is going to a terminal, the ref names + are shown as if 'short' were given, otherwise no ref names are + shown. The default option is 'short'. --source:: Print out the ref name given on the command line by which each @@ -201,7 +203,7 @@ mailmap.*:: notes.displayRef:: Which refs, in addition to the default set by `core.notesRef` - or 'GIT_NOTES_REF', to read notes from when showing commit + or `GIT_NOTES_REF`, to read notes from when showing commit messages with the `log` family of commands. See linkgit:git-notes[1]. + @@ -210,7 +212,7 @@ multiple times. A warning will be issued for refs that do not exist, but a glob that does not match any refs is silently ignored. + This setting can be disabled by the `--no-notes` option, -overridden by the 'GIT_NOTES_DISPLAY_REF' environment variable, +overridden by the `GIT_NOTES_DISPLAY_REF` environment variable, and overridden by the `--notes=<ref>` option. GIT diff --git a/Documentation/git-merge.txt b/Documentation/git-merge.txt index 07f7295ec8..b758d5556c 100644 --- a/Documentation/git-merge.txt +++ b/Documentation/git-merge.txt @@ -11,6 +11,7 @@ SYNOPSIS [verse] 'git merge' [-n] [--stat] [--no-commit] [--squash] [--[no-]edit] [-s <strategy>] [-X <strategy-option>] [-S[<keyid>]] + [--[no-]allow-unrelated-histories] [--[no-]rerere-autoupdate] [-m <msg>] [<commit>...] 'git merge' <msg> HEAD <commit>... 'git merge' --abort diff --git a/Documentation/git-notes.txt b/Documentation/git-notes.txt index 9c4fd6812c..02a10bc3b6 100644 --- a/Documentation/git-notes.txt +++ b/Documentation/git-notes.txt @@ -161,7 +161,7 @@ OPTIONS --ref <ref>:: Manipulate the notes tree in <ref>. This overrides - 'GIT_NOTES_REF' and the "core.notesRef" configuration. The ref + `GIT_NOTES_REF` and the "core.notesRef" configuration. The ref specifies the full refname when it begins with `refs/notes/`; when it begins with `notes/`, `refs/` and otherwise `refs/notes/` is prefixed to form a full name of the ref. @@ -333,10 +333,10 @@ notes.<name>.mergeStrategy:: notes.displayRef:: Which ref (or refs, if a glob or specified more than once), in addition to the default set by `core.notesRef` or - 'GIT_NOTES_REF', to read notes from when showing commit + `GIT_NOTES_REF`, to read notes from when showing commit messages with the 'git log' family of commands. This setting can be overridden on the command line or by the - 'GIT_NOTES_DISPLAY_REF' environment variable. + `GIT_NOTES_DISPLAY_REF` environment variable. See linkgit:git-log[1]. notes.rewrite.<command>:: @@ -345,7 +345,7 @@ notes.rewrite.<command>:: notes from the original to the rewritten commit. Defaults to `true`. See also "`notes.rewriteRef`" below. + -This setting can be overridden by the 'GIT_NOTES_REWRITE_REF' +This setting can be overridden by the `GIT_NOTES_REWRITE_REF` environment variable. notes.rewriteMode:: @@ -366,33 +366,33 @@ notes.rewriteRef:: Does not have a default value; you must configure this variable to enable note rewriting. + -Can be overridden with the 'GIT_NOTES_REWRITE_REF' environment variable. +Can be overridden with the `GIT_NOTES_REWRITE_REF` environment variable. ENVIRONMENT ----------- -'GIT_NOTES_REF':: +`GIT_NOTES_REF`:: Which ref to manipulate notes from, instead of `refs/notes/commits`. This overrides the `core.notesRef` setting. -'GIT_NOTES_DISPLAY_REF':: +`GIT_NOTES_DISPLAY_REF`:: Colon-delimited list of refs or globs indicating which refs, in addition to the default from `core.notesRef` or - 'GIT_NOTES_REF', to read notes from when showing commit + `GIT_NOTES_REF`, to read notes from when showing commit messages. This overrides the `notes.displayRef` setting. + A warning will be issued for refs that do not exist, but a glob that does not match any refs is silently ignored. -'GIT_NOTES_REWRITE_MODE':: +`GIT_NOTES_REWRITE_MODE`:: When copying notes during a rewrite, what to do if the target commit already has a note. Must be one of `overwrite`, `concatenate`, `cat_sort_uniq`, or `ignore`. This overrides the `core.rewriteMode` setting. -'GIT_NOTES_REWRITE_REF':: +`GIT_NOTES_REWRITE_REF`:: When rewriting commits, which notes to copy from the original to the rewritten commit. Must be a colon-delimited list of refs or globs. diff --git a/Documentation/git-p4.txt b/Documentation/git-p4.txt index 35e3170918..9d4f1519e7 100644 --- a/Documentation/git-p4.txt +++ b/Documentation/git-p4.txt @@ -134,7 +134,7 @@ Submit ~~~~~~ Submitting changes from a Git repository back to the p4 repository requires a separate p4 client workspace. This should be specified -using the 'P4CLIENT' environment variable or the Git configuration +using the `P4CLIENT` environment variable or the Git configuration variable 'git-p4.client'. The p4 client must exist, but the client root will be created and populated if it does not already exist. @@ -166,7 +166,7 @@ General options All commands except clone accept these options. --git-dir <dir>:: - Set the 'GIT_DIR' environment variable. See linkgit:git[1]. + Set the `GIT_DIR` environment variable. See linkgit:git[1]. -v:: --verbose:: @@ -551,6 +551,17 @@ git-p4.keepEmptyCommits:: A changelist that contains only excluded files will be imported as an empty commit if this boolean option is set to true. +git-p4.mapUser:: + Map a P4 user to a name and email address in Git. Use a string + with the following format to create a mapping: ++ +------------- +git config --add git-p4.mapUser "p4user = First Last <mail@address.com>" +------------- ++ +A mapping will override any user information from P4. Mappings for +multiple P4 user can be defined. + Submit variables ~~~~~~~~~~~~~~~~ git-p4.detectRenames:: diff --git a/Documentation/git-pull.txt b/Documentation/git-pull.txt index a62a2a615d..d033b258e5 100644 --- a/Documentation/git-pull.txt +++ b/Documentation/git-pull.txt @@ -128,6 +128,15 @@ unless you have read linkgit:git-rebase[1] carefully. --no-rebase:: Override earlier --rebase. +--autostash:: +--no-autostash:: + Before starting rebase, stash local modifications away (see + linkgit:git-stash[1]) if needed, and apply the stash when + done. `--no-autostash` is useful to override the `rebase.autoStash` + configuration variable (see linkgit:git-config[1]). ++ +This option is only valid when "--rebase" is used. + Options related to fetching ~~~~~~~~~~~~~~~~~~~~~~~~~~~ diff --git a/Documentation/git-push.txt b/Documentation/git-push.txt index cf6ee4a4df..19f46b64d3 100644 --- a/Documentation/git-push.txt +++ b/Documentation/git-push.txt @@ -137,8 +137,8 @@ already exists on the remote side. and also push annotated tags in `refs/tags` that are missing from the remote but are pointing at commit-ish that are reachable from the refs being pushed. This can also be specified - with configuration variable 'push.followTags'. For more - information, see 'push.followTags' in linkgit:git-config[1]. + with configuration variable `push.followTags`. For more + information, see `push.followTags` in linkgit:git-config[1]. --[no-]signed:: --sign=(true|false|if-asked):: @@ -240,7 +240,7 @@ origin +master` to force a push to the `master` branch). See the For every branch that is up to date or successfully pushed, add upstream (tracking) reference, used by argument-less linkgit:git-pull[1] and other commands. For more information, - see 'branch.<name>.merge' in linkgit:git-config[1]. + see `branch.<name>.merge` in linkgit:git-config[1]. --[no-]thin:: These options are passed to linkgit:git-send-pack[1]. A thin transfer diff --git a/Documentation/git-quiltimport.txt b/Documentation/git-quiltimport.txt index ff633b0db7..8cf952b4de 100644 --- a/Documentation/git-quiltimport.txt +++ b/Documentation/git-quiltimport.txt @@ -46,14 +46,14 @@ OPTIONS The directory to find the quilt patches. + The default for the patch directory is patches -or the value of the $QUILT_PATCHES environment +or the value of the `$QUILT_PATCHES` environment variable. --series <file>:: The quilt series file. + The default for the series file is <patches>/series -or the value of the $QUILT_SERIES environment +or the value of the `$QUILT_SERIES` environment variable. GIT diff --git a/Documentation/git-rebase.txt b/Documentation/git-rebase.txt index 6ed610a031..0387b40e0a 100644 --- a/Documentation/git-rebase.txt +++ b/Documentation/git-rebase.txt @@ -391,9 +391,6 @@ idea unless you know what you are doing (see BUGS below). final history. <cmd> will be interpreted as one or more shell commands. + -This option can only be used with the `--interactive` option -(see INTERACTIVE MODE below). -+ You may execute several commands by either using one instance of `--exec` with several commands: + @@ -406,6 +403,9 @@ or by giving more than one `--exec`: If `--autosquash` is used, "exec" lines will not be appended for the intermediate commits, and will only appear at the end of each squash/fixup series. ++ +This uses the `--interactive` machinery internally, but it can be run +without an explicit `--interactive`. --root:: Rebase all commits reachable from <branch>, instead of diff --git a/Documentation/git-replace.txt b/Documentation/git-replace.txt index 8fff598fd6..e5c57ae6ef 100644 --- a/Documentation/git-replace.txt +++ b/Documentation/git-replace.txt @@ -51,7 +51,7 @@ $ git cat-file commit foo shows information about commit 'bar'. -The 'GIT_NO_REPLACE_OBJECTS' environment variable can be set to +The `GIT_NO_REPLACE_OBJECTS` environment variable can be set to achieve the same effect as the `--no-replace-objects` option. OPTIONS diff --git a/Documentation/git-send-email.txt b/Documentation/git-send-email.txt index 771a7b5b09..d0b38b4b10 100644 --- a/Documentation/git-send-email.txt +++ b/Documentation/git-send-email.txt @@ -47,18 +47,18 @@ Composing --annotate:: Review and edit each patch you're about to send. Default is the value - of 'sendemail.annotate'. See the CONFIGURATION section for - 'sendemail.multiEdit'. + of `sendemail.annotate`. See the CONFIGURATION section for + `sendemail.multiEdit`. --bcc=<address>,...:: Specify a "Bcc:" value for each email. Default is the value of - 'sendemail.bcc'. + `sendemail.bcc`. + This option may be specified multiple times. --cc=<address>,...:: Specify a starting "Cc:" value for each email. - Default is the value of 'sendemail.cc'. + Default is the value of `sendemail.cc`. + This option may be specified multiple times. @@ -74,12 +74,12 @@ and In-Reply-To headers will be used unless they are removed. + Missing From or In-Reply-To headers will be prompted for. + -See the CONFIGURATION section for 'sendemail.multiEdit'. +See the CONFIGURATION section for `sendemail.multiEdit`. --from=<address>:: Specify the sender of the emails. If not specified on the command line, - the value of the 'sendemail.from' configuration option is used. If - neither the command-line option nor 'sendemail.from' are set, then the + the value of the `sendemail.from` configuration option is used. If + neither the command-line option nor `sendemail.from` are set, then the user will be prompted for the value. The default for the prompt will be the value of GIT_AUTHOR_IDENT, or GIT_COMMITTER_IDENT if that is not set, as returned by "git var -l". @@ -114,7 +114,7 @@ is not set, this will be prompted for. --to=<address>,...:: Specify the primary recipient of the emails generated. Generally, this will be the upstream maintainer of the project involved. Default is the - value of the 'sendemail.to' configuration value; if that is unspecified, + value of the `sendemail.to` configuration value; if that is unspecified, and --to-cmd is not specified, this will be prompted for. + This option may be specified multiple times. @@ -138,7 +138,7 @@ Note that no attempts whatsoever are made to validate the encoding. can be useful when the repository contains files that contain carriage returns, but makes the raw patch email file (as saved from a MUA) much harder to inspect manually. base64 is even more fool proof, but also - even more opaque. Default is the value of the 'sendemail.transferEncoding' + even more opaque. Default is the value of the `sendemail.transferEncoding` configuration value; if that is unspecified, git will use 8bit and not add a Content-Transfer-Encoding header. @@ -157,20 +157,20 @@ Sending subscribed to a list. In order to use the 'From' address, set the value to "auto". If you use the sendmail binary, you must have suitable privileges for the -f parameter. Default is the value of the - 'sendemail.envelopeSender' configuration variable; if that is + `sendemail.envelopeSender` configuration variable; if that is unspecified, choosing the envelope sender is left to your MTA. --smtp-encryption=<encryption>:: Specify the encryption to use, either 'ssl' or 'tls'. Any other value reverts to plain SMTP. Default is the value of - 'sendemail.smtpEncryption'. + `sendemail.smtpEncryption`. --smtp-domain=<FQDN>:: Specifies the Fully Qualified Domain Name (FQDN) used in the HELO/EHLO command to the SMTP server. Some servers require the FQDN to match your IP address. If not set, git send-email attempts to determine your FQDN automatically. Default is the value of - 'sendemail.smtpDomain'. + `sendemail.smtpDomain`. --smtp-auth=<mechanisms>:: Whitespace-separated list of allowed SMTP-AUTH mechanisms. This setting @@ -188,13 +188,13 @@ is specified, all mechanisms supported by the SASL library can be used. --smtp-pass[=<password>]:: Password for SMTP-AUTH. The argument is optional: If no argument is specified, then the empty string is used as - the password. Default is the value of 'sendemail.smtpPass', + the password. Default is the value of `sendemail.smtpPass`, however '--smtp-pass' always overrides this value. + Furthermore, passwords need not be specified in configuration files or on the command line. If a username has been specified (with -'--smtp-user' or a 'sendemail.smtpUser'), but no password has been -specified (with '--smtp-pass' or 'sendemail.smtpPass'), then +'--smtp-user' or a `sendemail.smtpUser`), but no password has been +specified (with '--smtp-pass' or `sendemail.smtpPass`), then a password is obtained using 'git-credential'. --smtp-server=<host>:: @@ -202,7 +202,7 @@ a password is obtained using 'git-credential'. `smtp.example.com` or a raw IP address). Alternatively it can specify a full pathname of a sendmail-like program instead; the program must support the `-i` option. Default value can - be specified by the 'sendemail.smtpServer' configuration + be specified by the `sendemail.smtpServer` configuration option; the built-in default is `/usr/sbin/sendmail` or `/usr/lib/sendmail` if such program is available, or `localhost` otherwise. @@ -213,11 +213,11 @@ a password is obtained using 'git-credential'. submission port 587, or the common SSL smtp port 465); symbolic port names (e.g. "submission" instead of 587) are also accepted. The port can also be set with the - 'sendemail.smtpServerPort' configuration variable. + `sendemail.smtpServerPort` configuration variable. --smtp-server-option=<option>:: If set, specifies the outgoing SMTP server option to use. - Default value can be specified by the 'sendemail.smtpServerOption' + Default value can be specified by the `sendemail.smtpServerOption` configuration option. + The --smtp-server-option option must be repeated for each option you want @@ -234,13 +234,13 @@ must be used for each option. certificates concatenated together: see verify(1) -CAfile and -CApath for more information on these). Set it to an empty string to disable certificate verification. Defaults to the value of the - 'sendemail.smtpsslcertpath' configuration variable, if set, or the + `sendemail.smtpsslcertpath` configuration variable, if set, or the backing SSL library's compiled-in default otherwise (which should be the best choice on most platforms). --smtp-user=<user>:: - Username for SMTP-AUTH. Default is the value of 'sendemail.smtpUser'; - if a username is not specified (with '--smtp-user' or 'sendemail.smtpUser'), + Username for SMTP-AUTH. Default is the value of `sendemail.smtpUser`; + if a username is not specified (with '--smtp-user' or `sendemail.smtpUser`), then authentication is not attempted. --smtp-debug=0|1:: @@ -261,25 +261,25 @@ Automating Specify a command to execute once per patch file which should generate patch file specific "Cc:" entries. Output of this command must be single email address per line. - Default is the value of 'sendemail.ccCmd' configuration value. + Default is the value of `sendemail.ccCmd` configuration value. --[no-]chain-reply-to:: If this is set, each email will be sent as a reply to the previous email sent. If disabled with "--no-chain-reply-to", all emails after the first will be sent as replies to the first email sent. When using this, it is recommended that the first file given be an overview of the - entire patch series. Disabled by default, but the 'sendemail.chainReplyTo' + entire patch series. Disabled by default, but the `sendemail.chainReplyTo` configuration variable can be used to enable it. --identity=<identity>:: A configuration identity. When given, causes values in the 'sendemail.<identity>' subsection to take precedence over values in the 'sendemail' section. The default identity is - the value of 'sendemail.identity'. + the value of `sendemail.identity`. --[no-]signed-off-by-cc:: If this is set, add emails found in Signed-off-by: or Cc: lines to the - cc list. Default is the value of 'sendemail.signedoffbycc' configuration + cc list. Default is the value of `sendemail.signedoffbycc` configuration value; if that is unspecified, default to --signed-off-by-cc. --[no-]cc-cover:: @@ -312,13 +312,13 @@ Automating - 'all' will suppress all auto cc values. -- + -Default is the value of 'sendemail.suppresscc' configuration value; if +Default is the value of `sendemail.suppresscc` configuration value; if that is unspecified, default to 'self' if --suppress-from is specified, as well as 'body' if --no-signed-off-cc is specified. --[no-]suppress-from:: If this is set, do not add the From: address to the cc: list. - Default is the value of 'sendemail.suppressFrom' configuration + Default is the value of `sendemail.suppressFrom` configuration value; if that is unspecified, default to --no-suppress-from. --[no-]thread:: @@ -330,7 +330,7 @@ specified, as well as 'body' if --no-signed-off-cc is specified. + If disabled with "--no-thread", those headers will not be added (unless specified with --in-reply-to). Default is the value of the -'sendemail.thread' configuration value; if that is unspecified, +`sendemail.thread` configuration value; if that is unspecified, default to --thread. + It is up to the user to ensure that no In-Reply-To header already @@ -355,7 +355,7 @@ Administering - 'auto' is equivalent to 'cc' + 'compose' -- + -Default is the value of 'sendemail.confirm' configuration value; if that +Default is the value of `sendemail.confirm` configuration value; if that is unspecified, default to 'auto' unless any of the suppress options have been specified, in which case default to 'compose'. @@ -381,7 +381,7 @@ have been specified, in which case default to 'compose'. is due to SMTP limits as described by http://www.ietf.org/rfc/rfc2821.txt. -- + -Default is the value of 'sendemail.validate'; if this is not set, +Default is the value of `sendemail.validate`; if this is not set, default to '--validate'. --force:: @@ -403,7 +403,7 @@ CONFIGURATION sendemail.aliasesFile:: To avoid typing long email addresses, point this to one or more - email aliases files. You must also supply 'sendemail.aliasFileType'. + email aliases files. You must also supply `sendemail.aliasFileType`. sendemail.aliasFileType:: Format of the file(s) specified in sendemail.aliasesFile. Must be @@ -450,6 +450,19 @@ edit ~/.gitconfig to specify your account settings: smtpUser = yourname@gmail.com smtpServerPort = 587 +If you have multifactor authentication setup on your gmail account, you will +need to generate an app-specific password for use with 'git send-email'. Visit +https://security.google.com/settings/security/apppasswords to setup an +app-specific password. Once setup, you can store it with the credentials +helper: + + $ git credential fill + protocol=smtp + host=smtp.gmail.com + username=youname@gmail.com + password=app-password + + Once your commits are ready to be sent to the mailing list, run the following commands: diff --git a/Documentation/git-sh-setup.txt b/Documentation/git-sh-setup.txt index 4f67c4cde6..8632612c31 100644 --- a/Documentation/git-sh-setup.txt +++ b/Documentation/git-sh-setup.txt @@ -41,7 +41,7 @@ usage:: die with the usage message. set_reflog_action:: - Set GIT_REFLOG_ACTION environment to a given string (typically + Set `GIT_REFLOG_ACTION` environment to a given string (typically the name of the program) unless it is already set. Whenever the script runs a `git` command that updates refs, a reflog entry is created using the value of this string to leave the diff --git a/Documentation/git-submodule.txt b/Documentation/git-submodule.txt index ad851838cc..9226c4380c 100644 --- a/Documentation/git-submodule.txt +++ b/Documentation/git-submodule.txt @@ -16,7 +16,7 @@ SYNOPSIS 'git submodule' [--quiet] deinit [-f|--force] (--all|[--] <path>...) 'git submodule' [--quiet] update [--init] [--remote] [-N|--no-fetch] [-f|--force] [--rebase|--merge] [--reference <repository>] - [--depth <depth>] [--recursive] [--] [<path>...] + [--depth <depth>] [--recursive] [--jobs <n>] [--] [<path>...] 'git submodule' [--quiet] summary [--cached|--files] [(-n|--summary-limit) <n>] [commit] [--] [<path>...] 'git submodule' [--quiet] foreach [--recursive] <command> @@ -384,6 +384,11 @@ for linkgit:git-clone[1]'s `--reference` and `--shared` options carefully. clone with a history truncated to the specified number of revisions. See linkgit:git-clone[1] +-j <n>:: +--jobs <n>:: + This option is only valid for the update command. + Clone new submodules in parallel with as many jobs. + Defaults to the `submodule.fetchJobs` option. <path>...:: Paths to submodule(s). When specified this will restrict the command diff --git a/Documentation/git-svn.txt b/Documentation/git-svn.txt index fb23a98a17..698a6685f6 100644 --- a/Documentation/git-svn.txt +++ b/Documentation/git-svn.txt @@ -459,6 +459,20 @@ Any other arguments are passed directly to 'git log' Gets the Subversion property given as the first argument, for a file. A specific revision can be specified with -r/--revision. +'propset':: + Sets the Subversion property given as the first argument, to the + value given as the second argument for the file given as the + third argument. ++ +Example: ++ +------------------------------------------------------------------------ +git svn propset svn:keywords "FreeBSD=%H" devel/py-tipper/Makefile +------------------------------------------------------------------------ ++ +This will set the property 'svn:keywords' to 'FreeBSD=%H' for the file +'devel/py-tipper/Makefile'. + 'show-externals':: Shows the Subversion externals. Use -r/--revision to specify a specific revision. @@ -748,7 +762,7 @@ svn-remote.<name>.rewriteUUID:: svn-remote.<name>.pushurl:: - Similar to Git's 'remote.<name>.pushurl', this key is designed + Similar to Git's `remote.<name>.pushurl`, this key is designed to be used in cases where 'url' points to an SVN repository via a read-only transport, to provide an alternate read/write transport. It is assumed that both keys point to the same diff --git a/Documentation/git-tag.txt b/Documentation/git-tag.txt index abab4814ec..6b89393746 100644 --- a/Documentation/git-tag.txt +++ b/Documentation/git-tag.txt @@ -78,7 +78,7 @@ OPTIONS -v:: --verify:: - Verify the gpg signature of the given tag names. + Verify the GPG signature of the given tag names. -n<num>:: <num> specifies how many lines from the annotation, if any, @@ -104,7 +104,7 @@ OPTIONS order can also be affected by the "versionsort.prereleaseSuffix" configuration variable. The keys supported are the same as those in `git for-each-ref`. - Sort order defaults to the value configured for the 'tag.sort' + Sort order defaults to the value configured for the `tag.sort` variable if it exists, or lexicographic order otherwise. See linkgit:git-config[1]. diff --git a/Documentation/git-verify-commit.txt b/Documentation/git-verify-commit.txt index ecf4da16cf..92097f6673 100644 --- a/Documentation/git-verify-commit.txt +++ b/Documentation/git-verify-commit.txt @@ -12,7 +12,7 @@ SYNOPSIS DESCRIPTION ----------- -Validates the gpg signature created by 'git commit -S'. +Validates the GPG signature created by 'git commit -S'. OPTIONS ------- diff --git a/Documentation/git-web--browse.txt b/Documentation/git-web--browse.txt index 16ede5b4c3..7daa28fd94 100644 --- a/Documentation/git-web--browse.txt +++ b/Documentation/git-web--browse.txt @@ -62,14 +62,14 @@ CONF.VAR (from -c option) and web.browser ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The web browser can be specified using a configuration variable passed -with the -c (or --config) command-line option, or the 'web.browser' +with the -c (or --config) command-line option, or the `web.browser` configuration variable if the former is not used. browser.<tool>.path ~~~~~~~~~~~~~~~~~~~ You can explicitly provide a full path to your preferred browser by -setting the configuration variable 'browser.<tool>.path'. For example, +setting the configuration variable `browser.<tool>.path`. For example, you can configure the absolute path to firefox by setting 'browser.firefox.path'. Otherwise, 'git web{litdd}browse' assumes the tool is available in PATH. @@ -79,7 +79,7 @@ browser.<tool>.cmd When the browser, specified by options or configuration variables, is not among the supported ones, then the corresponding -'browser.<tool>.cmd' configuration variable will be looked up. If this +`browser.<tool>.cmd` configuration variable will be looked up. If this variable exists then 'git web{litdd}browse' will treat the specified tool as a custom command and will use a shell eval to run the command with the URLs passed as arguments. diff --git a/Documentation/git-worktree.txt b/Documentation/git-worktree.txt index 62c76c1c89..c62234538b 100644 --- a/Documentation/git-worktree.txt +++ b/Documentation/git-worktree.txt @@ -9,7 +9,7 @@ git-worktree - Manage multiple working trees SYNOPSIS -------- [verse] -'git worktree add' [-f] [--detach] [-b <new-branch>] <path> [<branch>] +'git worktree add' [-f] [--detach] [--checkout] [-b <new-branch>] <path> [<branch>] 'git worktree prune' [-n] [-v] [--expire <expire>] 'git worktree list' [--porcelain] @@ -87,6 +87,12 @@ OPTIONS With `add`, detach HEAD in the new working tree. See "DETACHED HEAD" in linkgit:git-checkout[1]. +--[no-]checkout:: + By default, `add` checks out `<branch>`, however, `--no-checkout` can + be used to suppress checkout in order to make customizations, + such as configuring sparse-checkout. See "Sparse checkout" + in linkgit:git-read-tree[1]. + -n:: --dry-run:: With `prune`, do not remove anything; just report what it would diff --git a/Documentation/git.txt b/Documentation/git.txt index dd6dbf7dd9..494115ae1c 100644 --- a/Documentation/git.txt +++ b/Documentation/git.txt @@ -31,8 +31,8 @@ page to learn what commands Git offers. You can learn more about individual Git commands with "git help command". linkgit:gitcli[7] manual page gives you an overview of the command-line command syntax. -Formatted and hyperlinked version of the latest Git documentation -can be viewed at `http://git-htmldocs.googlecode.com/git/git.html`. +A formatted and hyperlinked copy of the latest Git documentation +can be viewed at `https://git.github.io/htmldocs/git.html`. ifdef::stalenotes[] [NOTE] @@ -43,9 +43,15 @@ unreleased) version of Git, that is available from the 'master' branch of the `git.git` repository. Documentation for older releases are available here: -* link:v2.8.3/git.html[documentation for release 2.8.3] +* link:v2.9.0/git.html[documentation for release 2.9] * release notes for + link:RelNotes/2.9.0.txt[2.9]. + +* link:v2.8.4/git.html[documentation for release 2.8.4] + +* release notes for + link:RelNotes/2.8.4.txt[2.8.4], link:RelNotes/2.8.3.txt[2.8.3], link:RelNotes/2.8.2.txt[2.8.2], link:RelNotes/2.8.1.txt[2.8.1], @@ -571,7 +577,7 @@ foo.bar= ...`) sets `foo.bar` to the empty string. --git-dir=<path>:: Set the path to the repository. This can also be controlled by - setting the GIT_DIR environment variable. It can be an absolute + setting the `GIT_DIR` environment variable. It can be an absolute path or relative path to current working directory. --work-tree=<path>:: @@ -821,46 +827,46 @@ These environment variables apply to 'all' core Git commands. Nb: it is worth noting that they may be used/overridden by SCMS sitting above Git so take care if using a foreign front-end. -'GIT_INDEX_FILE':: +`GIT_INDEX_FILE`:: This environment allows the specification of an alternate index file. If not specified, the default of `$GIT_DIR/index` is used. -'GIT_INDEX_VERSION':: +`GIT_INDEX_VERSION`:: This environment variable allows the specification of an index version for new repositories. It won't affect existing index files. By default index file version 2 or 3 is used. See linkgit:git-update-index[1] for more information. -'GIT_OBJECT_DIRECTORY':: +`GIT_OBJECT_DIRECTORY`:: If the object storage directory is specified via this environment variable then the sha1 directories are created underneath - otherwise the default `$GIT_DIR/objects` directory is used. -'GIT_ALTERNATE_OBJECT_DIRECTORIES':: +`GIT_ALTERNATE_OBJECT_DIRECTORIES`:: Due to the immutable nature of Git objects, old objects can be archived into shared, read-only directories. This variable specifies a ":" separated (on Windows ";" separated) list of Git object directories which can be used to search for Git objects. New objects will not be written to these directories. -'GIT_DIR':: - If the 'GIT_DIR' environment variable is set then it +`GIT_DIR`:: + If the `GIT_DIR` environment variable is set then it specifies a path to use instead of the default `.git` for the base of the repository. The '--git-dir' command-line option also sets this value. -'GIT_WORK_TREE':: +`GIT_WORK_TREE`:: Set the path to the root of the working tree. This can also be controlled by the '--work-tree' command-line option and the core.worktree configuration variable. -'GIT_NAMESPACE':: +`GIT_NAMESPACE`:: Set the Git namespace; see linkgit:gitnamespaces[7] for details. The '--namespace' command-line option also sets this value. -'GIT_CEILING_DIRECTORIES':: +`GIT_CEILING_DIRECTORIES`:: This should be a colon-separated list of absolute paths. If set, it is a list of directories that Git should not chdir up into while looking for a repository directory (useful for @@ -873,19 +879,19 @@ Git so take care if using a foreign front-end. can add an empty entry to the list to tell Git that the subsequent entries are not symlinks and needn't be resolved; e.g., - 'GIT_CEILING_DIRECTORIES=/maybe/symlink::/very/slow/non/symlink'. + `GIT_CEILING_DIRECTORIES=/maybe/symlink::/very/slow/non/symlink`. -'GIT_DISCOVERY_ACROSS_FILESYSTEM':: +`GIT_DISCOVERY_ACROSS_FILESYSTEM`:: When run in a directory that does not have ".git" repository directory, Git tries to find such a directory in the parent directories to find the top of the working tree, but by default it does not cross filesystem boundaries. This environment variable can be set to true to tell Git not to stop at filesystem - boundaries. Like 'GIT_CEILING_DIRECTORIES', this will not affect - an explicit repository directory set via 'GIT_DIR' or on the + boundaries. Like `GIT_CEILING_DIRECTORIES`, this will not affect + an explicit repository directory set via `GIT_DIR` or on the command line. -'GIT_COMMON_DIR':: +`GIT_COMMON_DIR`:: If this variable is set to a path, non-worktree files that are normally in $GIT_DIR will be taken from this path instead. Worktree-specific files such as HEAD or index are @@ -896,28 +902,28 @@ Git so take care if using a foreign front-end. Git Commits ~~~~~~~~~~~ -'GIT_AUTHOR_NAME':: -'GIT_AUTHOR_EMAIL':: -'GIT_AUTHOR_DATE':: -'GIT_COMMITTER_NAME':: -'GIT_COMMITTER_EMAIL':: -'GIT_COMMITTER_DATE':: +`GIT_AUTHOR_NAME`:: +`GIT_AUTHOR_EMAIL`:: +`GIT_AUTHOR_DATE`:: +`GIT_COMMITTER_NAME`:: +`GIT_COMMITTER_EMAIL`:: +`GIT_COMMITTER_DATE`:: 'EMAIL':: see linkgit:git-commit-tree[1] Git Diffs ~~~~~~~~~ -'GIT_DIFF_OPTS':: +`GIT_DIFF_OPTS`:: Only valid setting is "--unified=??" or "-u??" to set the number of context lines shown when a unified diff is created. This takes precedence over any "-U" or "--unified" option value passed on the Git diff command line. -'GIT_EXTERNAL_DIFF':: - When the environment variable 'GIT_EXTERNAL_DIFF' is set, the +`GIT_EXTERNAL_DIFF`:: + When the environment variable `GIT_EXTERNAL_DIFF` is set, the program named by it is called, instead of the diff invocation described above. For a path that is added, removed, or modified, - 'GIT_EXTERNAL_DIFF' is called with 7 parameters: + `GIT_EXTERNAL_DIFF` is called with 7 parameters: path old-file old-hex old-mode new-file new-hex new-mode + @@ -931,42 +937,42 @@ where: The file parameters can point at the user's working file (e.g. `new-file` in "git-diff-files"), `/dev/null` (e.g. `old-file` when a new file is added), or a temporary file (e.g. `old-file` in the -index). 'GIT_EXTERNAL_DIFF' should not worry about unlinking the -temporary file --- it is removed when 'GIT_EXTERNAL_DIFF' exits. +index). `GIT_EXTERNAL_DIFF` should not worry about unlinking the +temporary file --- it is removed when `GIT_EXTERNAL_DIFF` exits. + -For a path that is unmerged, 'GIT_EXTERNAL_DIFF' is called with 1 +For a path that is unmerged, `GIT_EXTERNAL_DIFF` is called with 1 parameter, <path>. + -For each path 'GIT_EXTERNAL_DIFF' is called, two environment variables, -'GIT_DIFF_PATH_COUNTER' and 'GIT_DIFF_PATH_TOTAL' are set. +For each path `GIT_EXTERNAL_DIFF` is called, two environment variables, +`GIT_DIFF_PATH_COUNTER` and `GIT_DIFF_PATH_TOTAL` are set. -'GIT_DIFF_PATH_COUNTER':: +`GIT_DIFF_PATH_COUNTER`:: A 1-based counter incremented by one for every path. -'GIT_DIFF_PATH_TOTAL':: +`GIT_DIFF_PATH_TOTAL`:: The total number of paths. other ~~~~~ -'GIT_MERGE_VERBOSITY':: +`GIT_MERGE_VERBOSITY`:: A number controlling the amount of output shown by the recursive merge strategy. Overrides merge.verbosity. See linkgit:git-merge[1] -'GIT_PAGER':: +`GIT_PAGER`:: This environment variable overrides `$PAGER`. If it is set to an empty string or to the value "cat", Git will not launch a pager. See also the `core.pager` option in linkgit:git-config[1]. -'GIT_EDITOR':: +`GIT_EDITOR`:: This environment variable overrides `$EDITOR` and `$VISUAL`. It is used by several Git commands when, on interactive mode, an editor is to be launched. See also linkgit:git-var[1] and the `core.editor` option in linkgit:git-config[1]. -'GIT_SSH':: -'GIT_SSH_COMMAND':: +`GIT_SSH`:: +`GIT_SSH_COMMAND`:: If either of these environment variables is set then 'git fetch' and 'git push' will use the specified command instead of 'ssh' when they need to connect to a remote system. @@ -986,18 +992,18 @@ Usually it is easier to configure any desired options through your personal `.ssh/config` file. Please consult your ssh documentation for further details. -'GIT_ASKPASS':: +`GIT_ASKPASS`:: If this environment variable is set, then Git commands which need to acquire passwords or passphrases (e.g. for HTTP or IMAP authentication) will call this program with a suitable prompt as command-line argument - and read the password from its STDOUT. See also the 'core.askPass' + and read the password from its STDOUT. See also the `core.askPass` option in linkgit:git-config[1]. -'GIT_TERMINAL_PROMPT':: +`GIT_TERMINAL_PROMPT`:: If this environment variable is set to `0`, git will not prompt on the terminal (e.g., when asking for HTTP authentication). -'GIT_CONFIG_NOSYSTEM':: +`GIT_CONFIG_NOSYSTEM`:: Whether to skip reading settings from the system-wide `$(prefix)/etc/gitconfig` file. This environment variable can be used along with `$HOME` and `$XDG_CONFIG_HOME` to create a @@ -1005,7 +1011,7 @@ for further details. temporarily to avoid using a buggy `/etc/gitconfig` file while waiting for someone with sufficient permissions to fix it. -'GIT_FLUSH':: +`GIT_FLUSH`:: If this environment variable is set to "1", then commands such as 'git blame' (in incremental mode), 'git rev-list', 'git log', 'git check-attr' and 'git check-ignore' will @@ -1016,7 +1022,7 @@ for further details. not set, Git will choose buffered or record-oriented flushing based on whether stdout appears to be redirected to a file or not. -'GIT_TRACE':: +`GIT_TRACE`:: Enables general trace messages, e.g. alias expansion, built-in command execution and external command execution. + @@ -1037,21 +1043,21 @@ into it. Unsetting the variable, or setting it to empty, "0" or "false" (case insensitive) disables trace messages. -'GIT_TRACE_PACK_ACCESS':: +`GIT_TRACE_PACK_ACCESS`:: Enables trace messages for all accesses to any packs. For each access, the pack file name and an offset in the pack is recorded. This may be helpful for troubleshooting some pack-related performance problems. - See 'GIT_TRACE' for available trace output options. + See `GIT_TRACE` for available trace output options. -'GIT_TRACE_PACKET':: +`GIT_TRACE_PACKET`:: Enables trace messages for all packets coming in or out of a given program. This can help with debugging object negotiation or other protocol issues. Tracing is turned off at a packet - starting with "PACK" (but see 'GIT_TRACE_PACKFILE' below). - See 'GIT_TRACE' for available trace output options. + starting with "PACK" (but see `GIT_TRACE_PACKFILE` below). + See `GIT_TRACE` for available trace output options. -'GIT_TRACE_PACKFILE':: +`GIT_TRACE_PACKFILE`:: Enables tracing of packfiles sent or received by a given program. Unlike other trace output, this trace is verbatim: no headers, and no quoting of binary data. You almost @@ -1062,22 +1068,22 @@ Unsetting the variable, or setting it to empty, "0" or Note that this is currently only implemented for the client side of clones and fetches. -'GIT_TRACE_PERFORMANCE':: +`GIT_TRACE_PERFORMANCE`:: Enables performance related trace messages, e.g. total execution time of each Git command. - See 'GIT_TRACE' for available trace output options. + See `GIT_TRACE` for available trace output options. -'GIT_TRACE_SETUP':: +`GIT_TRACE_SETUP`:: Enables trace messages printing the .git, working tree and current working directory after Git has completed its setup phase. - See 'GIT_TRACE' for available trace output options. + See `GIT_TRACE` for available trace output options. -'GIT_TRACE_SHALLOW':: +`GIT_TRACE_SHALLOW`:: Enables trace messages that can help debugging fetching / cloning of shallow repositories. - See 'GIT_TRACE' for available trace output options. + See `GIT_TRACE` for available trace output options. -'GIT_LITERAL_PATHSPECS':: +`GIT_LITERAL_PATHSPECS`:: Setting this variable to `1` will cause Git to treat all pathspecs literally, rather than as glob patterns. For example, running `GIT_LITERAL_PATHSPECS=1 git log -- '*.c'` will search @@ -1086,19 +1092,19 @@ of clones and fetches. literal paths to Git (e.g., paths previously given to you by `git ls-tree`, `--raw` diff output, etc). -'GIT_GLOB_PATHSPECS':: +`GIT_GLOB_PATHSPECS`:: Setting this variable to `1` will cause Git to treat all pathspecs as glob patterns (aka "glob" magic). -'GIT_NOGLOB_PATHSPECS':: +`GIT_NOGLOB_PATHSPECS`:: Setting this variable to `1` will cause Git to treat all pathspecs as literal (aka "literal" magic). -'GIT_ICASE_PATHSPECS':: +`GIT_ICASE_PATHSPECS`:: Setting this variable to `1` will cause Git to treat all pathspecs as case-insensitive. -'GIT_REFLOG_ACTION':: +`GIT_REFLOG_ACTION`:: When a ref is updated, reflog entries are created to keep track of the reason why the ref was updated (which is typically the name of the high-level command that updated @@ -1108,7 +1114,7 @@ of clones and fetches. variable when it is invoked as the top level command by the end user, to be recorded in the body of the reflog. -'GIT_REF_PARANOIA':: +`GIT_REF_PARANOIA`:: If set to `1`, include broken or badly named refs when iterating over lists of refs. In a normal, non-corrupted repository, this does nothing. However, enabling it may help git to detect and @@ -1119,7 +1125,7 @@ of clones and fetches. an operation has touched every ref (e.g., because you are cloning a repository to make a backup). -'GIT_ALLOW_PROTOCOL':: +`GIT_ALLOW_PROTOCOL`:: If set, provide a colon-separated list of protocols which are allowed to be used with fetch/push/clone. This is useful to restrict recursive submodule initialization from an untrusted diff --git a/Documentation/gitcredentials.txt b/Documentation/gitcredentials.txt index 1c75be0803..f3a75d1ce1 100644 --- a/Documentation/gitcredentials.txt +++ b/Documentation/gitcredentials.txt @@ -106,6 +106,11 @@ variable, each helper will be tried in turn, and may provide a username, password, or nothing. Once Git has acquired both a username and a password, no more helpers will be tried. +If `credential.helper` is configured to the empty string, this resets +the helper list to empty (so you may override a helper set by a +lower-priority config file by configuring the empty-string helper, +followed by whatever set of helpers you would like). + CREDENTIAL CONTEXTS ------------------- diff --git a/Documentation/githooks.txt b/Documentation/githooks.txt index a2f59b194c..d82e912e55 100644 --- a/Documentation/githooks.txt +++ b/Documentation/githooks.txt @@ -7,24 +7,35 @@ githooks - Hooks used by Git SYNOPSIS -------- -$GIT_DIR/hooks/* +$GIT_DIR/hooks/* (or \`git config core.hooksPath`/*) DESCRIPTION ----------- -Hooks are little scripts you can place in `$GIT_DIR/hooks` -directory to trigger action at certain points. When -'git init' is run, a handful of example hooks are copied into the -`hooks` directory of the new repository, but by default they are -all disabled. To enable a hook, rename it by removing its `.sample` -suffix. +Hooks are programs you can place in a hooks directory to trigger +actions at certain points in git's execution. Hooks that don't have +the executable bit set are ignored. -NOTE: It is also a requirement for a given hook to be executable. -However - in a freshly initialized repository - the `.sample` files are -executable by default. +By default the hooks directory is `$GIT_DIR/hooks`, but that can be +changed via the `core.hooksPath` configuration variable (see +linkgit:git-config[1]). -This document describes the currently defined hooks. +Before Git invokes a hook, it changes its working directory to either +the root of the working tree in a non-bare repository, or to the +$GIT_DIR in a bare repository. + +Hooks can get their arguments via the environment, command-line +arguments, and stdin. See the documentation for each hook below for +details. + +'git init' may copy hooks to the new repository, depending on its +configuration. See the "TEMPLATE DIRECTORY" section in +linkgit:git-init[1] for details. When the rest of this document refers +to "default hooks" it's talking about the default template shipped +with Git. + +The currently supported hooks are described below. HOOKS ----- @@ -32,15 +43,15 @@ HOOKS applypatch-msg ~~~~~~~~~~~~~~ -This hook is invoked by 'git am' script. It takes a single +This hook is invoked by 'git am'. It takes a single parameter, the name of the file that holds the proposed commit -log message. Exiting with non-zero status causes -'git am' to abort before applying the patch. +log message. Exiting with a non-zero status causes 'git am' to abort +before applying the patch. The hook is allowed to edit the message file in place, and can be used to normalize the message into some project standard -format (if the project has one). It can also be used to refuse -the commit after inspecting the message file. +format. It can also be used to refuse the commit after inspecting +the message file. The default 'applypatch-msg' hook, when enabled, runs the 'commit-msg' hook, if the latter is enabled. @@ -73,10 +84,10 @@ pre-commit ~~~~~~~~~~ This hook is invoked by 'git commit', and can be bypassed -with `--no-verify` option. It takes no parameter, and is +with the `--no-verify` option. It takes no parameters, and is invoked before obtaining the proposed commit log message and -making a commit. Exiting with non-zero status from this script -causes the 'git commit' to abort. +making a commit. Exiting with a non-zero status from this script +causes the 'git commit' command to abort before creating a commit. The default 'pre-commit' hook, when enabled, catches introduction of lines with trailing whitespaces and aborts the commit when @@ -115,15 +126,15 @@ commit-msg ~~~~~~~~~~ This hook is invoked by 'git commit', and can be bypassed -with `--no-verify` option. It takes a single parameter, the +with the `--no-verify` option. It takes a single parameter, the name of the file that holds the proposed commit log message. -Exiting with non-zero status causes the 'git commit' to +Exiting with a non-zero status causes the 'git commit' to abort. -The hook is allowed to edit the message file in place, and can -be used to normalize the message into some project standard -format (if the project has one). It can also be used to refuse -the commit after inspecting the message file. +The hook is allowed to edit the message file in place, and can be used +to normalize the message into some project standard format. It +can also be used to refuse the commit after inspecting the message +file. The default 'commit-msg' hook, when enabled, detects duplicate "Signed-off-by" lines, and aborts the commit if one is found. @@ -131,8 +142,8 @@ The default 'commit-msg' hook, when enabled, detects duplicate post-commit ~~~~~~~~~~~ -This hook is invoked by 'git commit'. It takes no -parameter, and is invoked after a commit is made. +This hook is invoked by 'git commit'. It takes no parameters, and is +invoked after a commit is made. This hook is meant primarily for notification, and cannot affect the outcome of 'git commit'. @@ -267,9 +278,11 @@ does not know the entire set of branches, so it would end up firing one e-mail per ref when used naively, though. The <<post-receive,'post-receive'>> hook is more suited to that. -Another use suggested on the mailing list is to use this hook to -implement access control which is finer grained than the one -based on filesystem group. +In an environment that restricts the users' access only to git +commands over the wire, this hook can be used to implement access +control without relying on filesystem ownership and group +membership. See linkgit:git-shell[1] for how you might use the login +shell to restrict the user's access to only git commands. Both standard output and standard error output are forwarded to 'git send-pack' on the other end, so you can simply `echo` messages diff --git a/Documentation/gitignore.txt b/Documentation/gitignore.txt index 473623d631..63260f0056 100644 --- a/Documentation/gitignore.txt +++ b/Documentation/gitignore.txt @@ -38,7 +38,7 @@ precedence, the last matching pattern decides the outcome): * Patterns read from `$GIT_DIR/info/exclude`. * Patterns read from the file specified by the configuration - variable 'core.excludesFile'. + variable `core.excludesFile`. Which file to place a pattern in depends on how the pattern is meant to be used. diff --git a/Documentation/gitremote-helpers.txt b/Documentation/gitremote-helpers.txt index 78e0b27c18..1e8659492f 100644 --- a/Documentation/gitremote-helpers.txt +++ b/Documentation/gitremote-helpers.txt @@ -43,7 +43,7 @@ arguments. The first argument specifies a remote repository as in Git; it is either the name of a configured remote or a URL. The second argument specifies a URL; it is usually of the form '<transport>://<address>', but any arbitrary string is possible. -The 'GIT_DIR' environment variable is set up for the remote helper +The `GIT_DIR` environment variable is set up for the remote helper and can be used to determine where to store additional data or from which directory to invoke auxiliary Git commands. @@ -61,10 +61,10 @@ argument. If such a URL is encountered directly on the command line, the first argument is '<address>', and if it is encountered in a configured remote, the first argument is the name of that remote. -Additionally, when a configured remote has 'remote.<name>.vcs' set to +Additionally, when a configured remote has `remote.<name>.vcs` set to '<transport>', Git explicitly invokes 'git remote-<transport>' with '<name>' as the first argument. If set, the second argument is -'remote.<name>.url'; otherwise, the second argument is omitted. +`remote.<name>.url`; otherwise, the second argument is omitted. INPUT FORMAT ------------ diff --git a/Documentation/gitweb.conf.txt b/Documentation/gitweb.conf.txt index 8a42270074..a79e350246 100644 --- a/Documentation/gitweb.conf.txt +++ b/Documentation/gitweb.conf.txt @@ -376,7 +376,7 @@ $site_name:: Name of your site or organization, to appear in page titles. Set it to something descriptive for clearer bookmarks etc. If this variable is not set or is, then gitweb uses the value of the `SERVER_NAME` - CGI environment variable, setting site name to "$SERVER_NAME Git", + `CGI` environment variable, setting site name to "$SERVER_NAME Git", or "Untitled Git" if this variable is not set (e.g. if running gitweb as standalone script). + diff --git a/Documentation/gitweb.txt b/Documentation/gitweb.txt index cd9c8951b2..96156e5e1f 100644 --- a/Documentation/gitweb.txt +++ b/Documentation/gitweb.txt @@ -206,8 +206,8 @@ $export_auth_hook = sub { Per-repository gitweb configuration ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ You can configure individual repositories shown in gitweb by creating file -in the 'GIT_DIR' of Git repository, or by setting some repo configuration -variable (in 'GIT_DIR/config', see linkgit:git-config[1]). +in the `GIT_DIR` of Git repository, or by setting some repo configuration +variable (in `GIT_DIR/config`, see linkgit:git-config[1]). You can use the following files in repository: diff --git a/Documentation/lint-gitlink.perl b/Documentation/lint-gitlink.perl new file mode 100755 index 0000000000..476cc30b83 --- /dev/null +++ b/Documentation/lint-gitlink.perl @@ -0,0 +1,71 @@ +#!/usr/bin/perl + +use File::Find; +use Getopt::Long; + +my $basedir = "."; +GetOptions("basedir=s" => \$basedir) + or die("Cannot parse command line arguments\n"); + +my $found_errors = 0; + +sub report { + my ($where, $what, $error) = @_; + print "$where: $error: $what\n"; + $found_errors = 1; +} + +sub grab_section { + my ($page) = @_; + open my $fh, "<", "$basedir/$page.txt"; + my $firstline = <$fh>; + chomp $firstline; + close $fh; + my ($section) = ($firstline =~ /.*\((\d)\)$/); + return $section; +} + +sub lint { + my ($file) = @_; + open my $fh, "<", $file + or return; + while (<$fh>) { + my $where = "$file:$."; + while (s/linkgit:((.*?)\[(\d)\])//) { + my ($target, $page, $section) = ($1, $2, $3); + + # De-AsciiDoc + $page =~ s/{litdd}/--/g; + + if ($page !~ /^git/) { + report($where, $target, "nongit link"); + next; + } + if (! -f "$basedir/$page.txt") { + report($where, $target, "no such source"); + next; + } + $real_section = grab_section($page); + if ($real_section != $section) { + report($where, $target, + "wrong section (should be $real_section)"); + next; + } + } + } + close $fh; +} + +sub lint_it { + lint($File::Find::name) if -f && /\.txt$/; +} + +if (!@ARGV) { + find({ wanted => \&lint_it, no_chdir => 1 }, $basedir); +} else { + for (@ARGV) { + lint($_); + } +} + +exit $found_errors; diff --git a/Documentation/merge-config.txt b/Documentation/merge-config.txt index 002ca58c21..df3ea3779b 100644 --- a/Documentation/merge-config.txt +++ b/Documentation/merge-config.txt @@ -61,7 +61,7 @@ merge.verbosity:: message if conflicts were detected. Level 1 outputs only conflicts, 2 outputs conflicts and file changes. Level 5 and above outputs debugging information. The default is level 2. - Can be overridden by the 'GIT_MERGE_VERBOSITY' environment variable. + Can be overridden by the `GIT_MERGE_VERBOSITY` environment variable. merge.<driver>.name:: Defines a human-readable name for a custom low-level diff --git a/Documentation/merge-options.txt b/Documentation/merge-options.txt index 30808a01e7..5b4a62e936 100644 --- a/Documentation/merge-options.txt +++ b/Documentation/merge-options.txt @@ -117,3 +117,11 @@ ifndef::git-pull[] reporting. endif::git-pull[] + +--allow-unrelated-histories:: + By default, `git merge` command refuses to merge histories + that do not share a common ancestor. This option can be + used to override this safety when merging histories of two + projects that started their lives independently. As that is + a very rare occasion, no configuration variable to enable + this by default exists and will not be added. diff --git a/Documentation/pretty-options.txt b/Documentation/pretty-options.txt index 54b88b6dca..e44fc8f738 100644 --- a/Documentation/pretty-options.txt +++ b/Documentation/pretty-options.txt @@ -26,7 +26,7 @@ people using 80-column terminals. --no-abbrev-commit:: Show the full 40-byte hexadecimal commit object name. This negates `--abbrev-commit` and those options which imply it such as - "--oneline". It also overrides the 'log.abbrevCommit' variable. + "--oneline". It also overrides the `log.abbrevCommit` variable. --oneline:: This is a shorthand for "--pretty=oneline --abbrev-commit" @@ -42,6 +42,20 @@ people using 80-column terminals. verbatim; this means that invalid sequences in the original commit may be copied to the output. +--expand-tabs=<n>:: +--expand-tabs:: +--no-expand-tabs:: + Perform a tab expansion (replace each tab with enough spaces + to fill to the next display column that is multiple of '<n>') + in the log message before showing it in the output. + `--expand-tabs` is a short-hand for `--expand-tabs=8`, and + `--no-expand-tabs` is a short-hand for `--expand-tabs=0`, + which disables tab expansion. ++ +By default, tabs are expanded in pretty formats that indent the log +message by 4 spaces (i.e. 'medium', which is the default, 'full', +and 'fuller'). + ifndef::git-rev-list[] --notes[=<treeish>]:: Show the notes (see linkgit:git-notes[1]) that annotate the @@ -51,7 +65,7 @@ ifndef::git-rev-list[] on the command line. + By default, the notes shown are from the notes refs listed in the -'core.notesRef' and 'notes.displayRef' variables (or corresponding +`core.notesRef` and `notes.displayRef` variables (or corresponding environment overrides). See linkgit:git-config[1] for more details. + With an optional '<treeish>' argument, use the treeish to find the notes diff --git a/Documentation/technical/api-parse-options.txt b/Documentation/technical/api-parse-options.txt index 695bd4bf43..27bd701c0d 100644 --- a/Documentation/technical/api-parse-options.txt +++ b/Documentation/technical/api-parse-options.txt @@ -144,8 +144,12 @@ There are some macros to easily define options: `OPT_COUNTUP(short, long, &int_var, description)`:: Introduce a count-up option. - `int_var` is incremented on each use of `--option`, and - reset to zero with `--no-option`. + Each use of `--option` increments `int_var`, starting from zero + (even if initially negative), and `--no-option` resets it to + zero. To determine if `--option` or `--no-option` was encountered at + all, initialize `int_var` to a negative value, and if it is still + negative after parse_options(), then neither `--option` nor + `--no-option` was seen. `OPT_BIT(short, long, &int_var, description, mask)`:: Introduce a boolean option. diff --git a/Documentation/technical/signature-format.txt b/Documentation/technical/signature-format.txt new file mode 100644 index 0000000000..2c9406a56a --- /dev/null +++ b/Documentation/technical/signature-format.txt @@ -0,0 +1,186 @@ +Git signature format +==================== + +== Overview + +Git uses cryptographic signatures in various places, currently objects (tags, +commits, mergetags) and transactions (pushes). In every case, the command which +is about to create an object or transaction determines a payload from that, +calls gpg to obtain a detached signature for the payload (`gpg -bsa`) and +embeds the signature into the object or transaction. + +Signatures always begin with `-----BEGIN PGP SIGNATURE-----` +and end with `-----END PGP SIGNATURE-----`, unless gpg is told to +produce RFC1991 signatures which use `MESSAGE` instead of `SIGNATURE`. + +The signed payload and the way the signature is embedded depends +on the type of the object resp. transaction. + +== Tag signatures + +- created by: `git tag -s` +- payload: annotated tag object +- embedding: append the signature to the unsigned tag object +- example: tag `signedtag` with subject `signed tag` + +---- +object 04b871796dc0420f8e7561a895b52484b701d51a +type commit +tag signedtag +tagger C O Mitter <committer@example.com> 1465981006 +0000 + +signed tag + +signed tag message body +-----BEGIN PGP SIGNATURE----- +Version: GnuPG v1 + +iQEcBAABAgAGBQJXYRhOAAoJEGEJLoW3InGJklkIAIcnhL7RwEb/+QeX9enkXhxn +rxfdqrvWd1K80sl2TOt8Bg/NYwrUBw/RWJ+sg/hhHp4WtvE1HDGHlkEz3y11Lkuh +8tSxS3qKTxXUGozyPGuE90sJfExhZlW4knIQ1wt/yWqM+33E9pN4hzPqLwyrdods +q8FWEqPPUbSJXoMbRPw04S5jrLtZSsUWbRYjmJCHzlhSfFWW4eFd37uquIaLUBS0 +rkC3Jrx7420jkIpgFcTI2s60uhSQLzgcCwdA2ukSYIRnjg/zDkj8+3h/GaROJ72x +lZyI6HWixKJkWw8lE9aAOD9TmTW9sFJwcVAzmAuFX2kUreDUKMZduGcoRYGpD7E= +=jpXa +-----END PGP SIGNATURE----- +---- + +- verify with: `git verify-tag [-v]` or `git tag -v` + +---- +gpg: Signature made Wed Jun 15 10:56:46 2016 CEST using RSA key ID B7227189 +gpg: Good signature from "Eris Discordia <discord@example.net>" +gpg: WARNING: This key is not certified with a trusted signature! +gpg: There is no indication that the signature belongs to the owner. +Primary key fingerprint: D4BE 2231 1AD3 131E 5EDA 29A4 6109 2E85 B722 7189 +object 04b871796dc0420f8e7561a895b52484b701d51a +type commit +tag signedtag +tagger C O Mitter <committer@example.com> 1465981006 +0000 + +signed tag + +signed tag message body +---- + +== Commit signatures + +- created by: `git commit -S` +- payload: commit object +- embedding: header entry `gpgsig` + (content is preceded by a space) +- example: commit with subject `signed commit` + +---- +tree eebfed94e75e7760540d1485c740902590a00332 +parent 04b871796dc0420f8e7561a895b52484b701d51a +author A U Thor <author@example.com> 1465981137 +0000 +committer C O Mitter <committer@example.com> 1465981137 +0000 +gpgsig -----BEGIN PGP SIGNATURE----- + Version: GnuPG v1 + + iQEcBAABAgAGBQJXYRjRAAoJEGEJLoW3InGJ3IwIAIY4SA6GxY3BjL60YyvsJPh/ + HRCJwH+w7wt3Yc/9/bW2F+gF72kdHOOs2jfv+OZhq0q4OAN6fvVSczISY/82LpS7 + DVdMQj2/YcHDT4xrDNBnXnviDO9G7am/9OE77kEbXrp7QPxvhjkicHNwy2rEflAA + zn075rtEERDHr8nRYiDh8eVrefSO7D+bdQ7gv+7GsYMsd2auJWi1dHOSfTr9HIF4 + HJhWXT9d2f8W+diRYXGh4X0wYiGg6na/soXc+vdtDYBzIxanRqjg8jCAeo1eOTk1 + EdTwhcTZlI0x5pvJ3H0+4hA2jtldVtmPM4OTB0cTrEWBad7XV6YgiyuII73Ve3I= + =jKHM + -----END PGP SIGNATURE----- + +signed commit + +signed commit message body +---- + +- verify with: `git verify-commit [-v]` (or `git show --show-signature`) + +---- +gpg: Signature made Wed Jun 15 10:58:57 2016 CEST using RSA key ID B7227189 +gpg: Good signature from "Eris Discordia <discord@example.net>" +gpg: WARNING: This key is not certified with a trusted signature! +gpg: There is no indication that the signature belongs to the owner. +Primary key fingerprint: D4BE 2231 1AD3 131E 5EDA 29A4 6109 2E85 B722 7189 +tree eebfed94e75e7760540d1485c740902590a00332 +parent 04b871796dc0420f8e7561a895b52484b701d51a +author A U Thor <author@example.com> 1465981137 +0000 +committer C O Mitter <committer@example.com> 1465981137 +0000 + +signed commit + +signed commit message body +---- + +== Mergetag signatures + +- created by: `git merge` on signed tag +- payload/embedding: the whole signed tag object is embedded into + the (merge) commit object as header entry `mergetag` +- example: merge of the signed tag `signedtag` as above + +---- +tree c7b1cff039a93f3600a1d18b82d26688668c7dea +parent c33429be94b5f2d3ee9b0adad223f877f174b05d +parent 04b871796dc0420f8e7561a895b52484b701d51a +author A U Thor <author@example.com> 1465982009 +0000 +committer C O Mitter <committer@example.com> 1465982009 +0000 +mergetag object 04b871796dc0420f8e7561a895b52484b701d51a + type commit + tag signedtag + tagger C O Mitter <committer@example.com> 1465981006 +0000 + + signed tag + + signed tag message body + -----BEGIN PGP SIGNATURE----- + Version: GnuPG v1 + + iQEcBAABAgAGBQJXYRhOAAoJEGEJLoW3InGJklkIAIcnhL7RwEb/+QeX9enkXhxn + rxfdqrvWd1K80sl2TOt8Bg/NYwrUBw/RWJ+sg/hhHp4WtvE1HDGHlkEz3y11Lkuh + 8tSxS3qKTxXUGozyPGuE90sJfExhZlW4knIQ1wt/yWqM+33E9pN4hzPqLwyrdods + q8FWEqPPUbSJXoMbRPw04S5jrLtZSsUWbRYjmJCHzlhSfFWW4eFd37uquIaLUBS0 + rkC3Jrx7420jkIpgFcTI2s60uhSQLzgcCwdA2ukSYIRnjg/zDkj8+3h/GaROJ72x + lZyI6HWixKJkWw8lE9aAOD9TmTW9sFJwcVAzmAuFX2kUreDUKMZduGcoRYGpD7E= + =jpXa + -----END PGP SIGNATURE----- + +Merge tag 'signedtag' into downstream + +signed tag + +signed tag message body + +# gpg: Signature made Wed Jun 15 08:56:46 2016 UTC using RSA key ID B7227189 +# gpg: Good signature from "Eris Discordia <discord@example.net>" +# gpg: WARNING: This key is not certified with a trusted signature! +# gpg: There is no indication that the signature belongs to the owner. +# Primary key fingerprint: D4BE 2231 1AD3 131E 5EDA 29A4 6109 2E85 B722 7189 +---- + +- verify with: verification is embedded in merge commit message by default, + alternatively with `git show --show-signature`: + +---- +commit 9863f0c76ff78712b6800e199a46aa56afbcbd49 +merged tag 'signedtag' +gpg: Signature made Wed Jun 15 10:56:46 2016 CEST using RSA key ID B7227189 +gpg: Good signature from "Eris Discordia <discord@example.net>" +gpg: WARNING: This key is not certified with a trusted signature! +gpg: There is no indication that the signature belongs to the owner. +Primary key fingerprint: D4BE 2231 1AD3 131E 5EDA 29A4 6109 2E85 B722 7189 +Merge: c33429b 04b8717 +Author: A U Thor <author@example.com> +Date: Wed Jun 15 09:13:29 2016 +0000 + + Merge tag 'signedtag' into downstream + + signed tag + + signed tag message body + + # gpg: Signature made Wed Jun 15 08:56:46 2016 UTC using RSA key ID B7227189 + # gpg: Good signature from "Eris Discordia <discord@example.net>" + # gpg: WARNING: This key is not certified with a trusted signature! + # gpg: There is no indication that the signature belongs to the owner. + # Primary key fingerprint: D4BE 2231 1AD3 131E 5EDA 29A4 6109 2E85 B722 7189 +---- |