diff options
Diffstat (limited to 'Documentation')
88 files changed, 4821 insertions, 204 deletions
diff --git a/Documentation/CodingGuidelines b/Documentation/CodingGuidelines index fe1c1e5bc2..45577117c2 100644 --- a/Documentation/CodingGuidelines +++ b/Documentation/CodingGuidelines @@ -35,10 +35,22 @@ For shell scripts specifically (not exhaustive): - Case arms are indented at the same depth as case and esac lines. + - Redirection operators should be written with space before, but no + space after them. In other words, write 'echo test >"$file"' + instead of 'echo test> $file' or 'echo test > $file'. Note that + even though it is not required by POSIX to double-quote the + redirection target in a variable (as shown above), our code does so + because some versions of bash issue a warning without the quotes. + - We prefer $( ... ) for command substitution; unlike ``, it properly nests. It should have been the way Bourne spelled it from day one, but unfortunately isn't. + - If you want to find out if a command is available on the user's + $PATH, you should use 'type <command>', instead of 'which <command>'. + The output of 'which' is not machine parseable and its exit code + is not reliable across platforms. + - We use POSIX compliant parameter substitutions and avoid bashisms; namely: @@ -81,6 +93,10 @@ For shell scripts specifically (not exhaustive): are ERE elements not BRE (note that \? and \+ are not even part of BRE -- making them accessible from BRE is a GNU extension). + - Use Git's gettext wrappers in git-sh-i18n to make the user + interface translatable. See "Marking strings for translation" in + po/README. + For C programs: - We use tabs to indent, and interpret tabs as taking up to @@ -144,6 +160,9 @@ For C programs: - When we pass <string, length> pair to functions, we should try to pass them in that order. + - Use Git's gettext wrappers to make the user interface + translatable. See "Marking strings for translation" in po/README. + Writing Documentation: Every user-visible change should be reflected in the documentation. diff --git a/Documentation/Makefile b/Documentation/Makefile index 5a340fd492..d40e211f22 100644 --- a/Documentation/Makefile +++ b/Documentation/Makefile @@ -1,12 +1,13 @@ MAN1_TXT= \ $(filter-out $(addsuffix .txt, $(ARTICLES) $(SP_ARTICLES)), \ $(wildcard git-*.txt)) \ - gitk.txt git.txt + gitk.txt gitweb.txt git.txt MAN5_TXT=gitattributes.txt gitignore.txt gitmodules.txt githooks.txt \ - gitrepository-layout.txt + gitrepository-layout.txt gitweb.conf.txt MAN7_TXT=gitcli.txt gittutorial.txt gittutorial-2.txt \ gitcvs-migration.txt gitcore-tutorial.txt gitglossary.txt \ gitdiffcore.txt gitnamespaces.txt gitrevisions.txt gitworkflows.txt +MAN7_TXT += gitcredentials.txt MAN_TXT = $(MAN1_TXT) $(MAN5_TXT) $(MAN7_TXT) MAN_XML=$(patsubst %.txt,%.xml,$(MAN_TXT)) @@ -19,7 +20,10 @@ ARTICLES += everyday ARTICLES += git-tools ARTICLES += git-bisect-lk2009 # with their own formatting rules. -SP_ARTICLES = howto/revert-branch-rebase howto/using-merge-subtree user-manual +SP_ARTICLES = user-manual +SP_ARTICLES += howto/revert-branch-rebase +SP_ARTICLES += howto/using-merge-subtree +SP_ARTICLES += howto/using-signed-tag-in-pull-request API_DOCS = $(patsubst %.txt,%,$(filter-out technical/api-index-skel.txt technical/api-index.txt, $(wildcard technical/api-*.txt))) SP_ARTICLES += $(API_DOCS) SP_ARTICLES += technical/api-index diff --git a/Documentation/RelNotes/1.7.10.1.txt b/Documentation/RelNotes/1.7.10.1.txt new file mode 100644 index 0000000000..36b8deef19 --- /dev/null +++ b/Documentation/RelNotes/1.7.10.1.txt @@ -0,0 +1,50 @@ +Git v1.7.10.1 Release Notes +=========================== + +Fixes since v1.7.10 +------------------- + + * "git add -p" is not designed to deal with unmerged paths but did + not exclude them and tried to apply funny patches only to fail. + + * When PATH contains an unreadable directory, alias expansion code + did not kick in, and failed with an error that said "git-subcmd" + was not found. + + * "git clean -d -f" (not "-d -f -f") is supposed to protect nested + working trees of independent git repositories that exist in the + current project working tree from getting removed, but the + protection applied only to such working trees that are at the + top-level of the current project by mistake. + + * "git commit --author=$name" did not tell the name that was being + recorded in the resulting commit to hooks, even though it does do + so when the end user overrode the authorship via the + "GIT_AUTHOR_NAME" environment variable. + + * When "git commit --template F" errors out because the user did not + touch the message, it claimed that it aborts due to "empty + message", which was utterly wrong. + + * The regexp configured with diff.wordregex was incorrectly reused + across files. + + * An age-old corner case bug in combine diff (only triggered with -U0 + and the hunk at the beginning of the file needs to be shown) has + been fixed. + + * Rename detection logic used to match two empty files as renames + during merge-recursive, leading to unnatural mismerges. + + * Running "notes merge --commit" failed to perform correctly when run + from any directory inside $GIT_DIR/. When "notes merge" stops with + conflicts, $GIT_DIR/NOTES_MERGE_WORKTREE is the place a user edits + to resolve it. + + * The 'push to upstream' implementation was broken in some corner + cases. "git push $there" without refspec, when the current branch + is set to push to a remote different from $there, used to push to + $there using the upstream information to a remote unreleated to + $there. + +Also contains minor fixes and documentation updates. diff --git a/Documentation/RelNotes/1.7.10.txt b/Documentation/RelNotes/1.7.10.txt new file mode 100644 index 0000000000..58100bf04e --- /dev/null +++ b/Documentation/RelNotes/1.7.10.txt @@ -0,0 +1,219 @@ +Git v1.7.10 Release Notes +========================= + +Compatibility Notes +------------------- + + * From this release on, the "git merge" command in an interactive + session will start an editor when it automatically resolves the + merge for the user to explain the resulting commit, just like the + "git commit" command does when it wasn't given a commit message. + + If you have a script that runs "git merge" and keeps its standard + input and output attached to the user's terminal, and if you do not + want the user to explain the resulting merge commits, you can + export GIT_MERGE_AUTOEDIT environment variable set to "no", like + this: + + #!/bin/sh + GIT_MERGE_AUTOEDIT=no + export GIT_MERGE_AUTOEDIT + + to disable this behavior (if you want your users to explain their + merge commits, you do not have to do anything). Alternatively, you + can give the "--no-edit" option to individual invocations of the + "git merge" command if you know everybody who uses your script has + Git v1.7.8 or newer. + + * The "--binary/-b" options to "git am" have been a no-op for quite a + while and were deprecated in mid 2008 (v1.6.0). When you give these + options to "git am", it will now warn and ask you not to use them. + + * When you do not tell which branches and tags to push to the "git + push" command in any way, the command used "matching refs" rule to + update remote branches and tags with branches and tags with the + same name you locally have. In future versions of Git, this will + change to push out only your current branch according to either the + "upstream" or the "current" rule. Although "upstream" may be more + powerful once the user understands Git better, the semantics + "current" gives is simpler and easier to understand for beginners + and may be a safer and better default option. We haven't decided + yet which one to switch to. + + +Updates since v1.7.9 +-------------------- + +UI, Workflows & Features + + * various "gitk" updates. + - show the path to the top level directory in the window title + - update preference edit dialog + - display file list correctly when directories are given on command line + - make "git-describe" output in the log message into a clickable link + - avoid matching the UNIX timestamp part when searching all fields + - give preference to symbolic font names like sans & monospace + - allow comparing two commits using a mark + - "gitk" honors log.showroot configuration. + + * Teams for localizing the messages from the Porcelain layer of + commands are starting to form, thanks to Jiang Xin who volunteered + to be the localization coordinator. Translated messages for + simplified Chinese, Swedish and Portuguese are available. + + * The configuration mechanism learned an "include" facility; an + assignment to the include.path pseudo-variable causes the named + file to be included in-place when Git looks up configuration + variables. + + * A content filter (clean/smudge) used to be just a way to make the + recorded contents "more useful", and allowed to fail; a filter can + now optionally be marked as "required". + + * Options whose names begin with "--no-" (e.g. the "--no-verify" + option of the "git commit" command) can be negated by omitting + "no-" from its name, e.g. "git commit --verify". + + * "git am" learned to pass "-b" option to underlying "git mailinfo", so + that a bracketed string other than "PATCH" at the beginning can be kept. + + * "git clone" learned "--single-branch" option to limit cloning to a + single branch (surprise!); tags that do not point into the history + of the branch are not fetched. + + * "git clone" learned to detach the HEAD in the resulting repository + when the user specifies a tag with "--branch" (e.g., "--branch=v1.0"). + Clone also learned to print the usual "detached HEAD" advice in such + a case, similar to "git checkout v1.0". + + * When showing a patch while ignoring whitespace changes, the context + lines are taken from the postimage, in order to make it easier to + view the output. + + * "git diff --stat" learned to adjust the width of the output on + wider terminals, and give more columns to pathnames as needed. + + * "diff-highlight" filter (in contrib/) was updated to produce more + aesthetically pleasing output. + + * "fsck" learned "--no-dangling" option to omit dangling object + information. + + * "git log -G" and "git log -S" learned to pay attention to the "-i" + option. With "-i", "log -G" ignores the case when finding patch + hunks that introduce or remove a string that matches the given + pattern. Similarly with "-i", "log -S" ignores the case when + finding the commit the given block of text appears or disappears + from the file. + + * "git merge" in an interactive session learned to spawn the editor + by default to let the user edit the auto-generated merge message, + to encourage people to explain their merges better. Legacy scripts + can export GIT_MERGE_AUTOEDIT=no to retain the historical behavior. + Both "git merge" and "git pull" can be given --no-edit from the + command line to accept the auto-generated merge message. + + * The advice message given when the user didn't give enough clue on + what to merge to "git pull" and "git merge" has been updated to + be more concise and easier to understand. + + * "git push" learned the "--prune" option, similar to "git fetch". + + * The whole directory that houses a top-level superproject managed by + "git submodule" can be moved to another place. + + * "git symbolic-ref" learned the "--short" option to abbreviate the + refname it shows unambiguously. + + * "git tag --list" can be given "--points-at <object>" to limit its + output to those that point at the given object. + + * "gitweb" allows intermediate entries in the directory hierarchy + that leads to a project to be clicked, which in turn shows the + list of projects inside that directory. + + * "gitweb" learned to read various pieces of information for the + repositories lazily, instead of reading everything that could be + needed (including the ones that are not necessary for a specific + task). + + * Project search in "gitweb" shows the substring that matched in the + project name and description highlighted. + + * HTTP transport learned to authenticate with a proxy if needed. + + * A new script "diffall" is added to contrib/; it drives an + external tool to perform a directory diff of two Git revisions + in one go, unlike "difftool" that compares one file at a time. + +Foreign Interface + + * Improved handling of views, labels and branches in "git-p4" (in contrib). + + * "git-p4" (in contrib) suffered from unnecessary merge conflicts when + p4 expanded the embedded $RCS$-like keywords; it can be now told to + unexpand them. + + * Some "git-svn" updates. + + * "vcs-svn"/"svn-fe" learned to read dumps with svn-deltas and + support incremental imports. + + * "git difftool/mergetool" learned to drive DeltaWalker. + +Performance + + * Unnecessary calls to parse_object() "git upload-pack" makes in + response to "git fetch", have been eliminated, to help performance + in repositories with excessive number of refs. + +Internal Implementation (please report possible regressions) + + * Recursive call chains in "git index-pack" to deal with long delta + chains have been flattened, to reduce the stack footprint. + + * Use of add_extra_ref() API is now gone, to make it possible to + cleanly restructure the overall refs API. + + * The command line parser of "git pack-objects" now uses parse-options + API. + + * The test suite supports the new "test_pause" helper function. + + * Parallel to the test suite, there is a beginning of performance + benchmarking framework. + + * t/Makefile is adjusted to prevent newer versions of GNU make from + running tests in seemingly random order. + + * The code to check if a path points at a file beyond a symbolic link + has been restructured to be thread-safe. + + * When pruning directories that has become empty during "git prune" + and "git prune-packed", call closedir() that iterates over a + directory before rmdir() it. + +Also contains minor documentation updates and code clean-ups. + + +Fixes since v1.7.9 +------------------ + +Unless otherwise noted, all the fixes since v1.7.9 in the maintenance +releases are contained in this release (see release notes to them for +details). + + * Build with NO_PERL_MAKEMAKER was broken and Git::I18N did not work + with versions of Perl older than 5.8.3. + (merge 5eb660e ab/perl-i18n later to maint). + + * "git tag -s" honored "gpg.program" configuration variable since + 1.7.9, but "git tag -v" and "git verify-tag" didn't. + (merge a2c2506 az/verify-tag-use-gpg-config later to maint). + + * "configure" script learned to take "--with-sane-tool-path" from the + command line to record SANE_TOOL_PATH (used to avoid broken platform + tools in /usr/bin) in config.mak.autogen. This may be useful for + people on Solaris who have saner tools outside /usr/xpg[46]/bin. + + * zsh port of bash completion script needed another workaround. diff --git a/Documentation/RelNotes/1.7.7.7.txt b/Documentation/RelNotes/1.7.7.7.txt new file mode 100644 index 0000000000..e79118d063 --- /dev/null +++ b/Documentation/RelNotes/1.7.7.7.txt @@ -0,0 +1,13 @@ +Git v1.7.7.7 Release Notes +========================== + +Fixes since v1.7.7.6 +-------------------- + + * An error message from 'git bundle' had an unmatched single quote pair in it. + + * 'git diff --histogram' option was not described. + + * 'git imap-send' carried an unused dead code. + +Also contains minor fixes and documentation updates. diff --git a/Documentation/RelNotes/1.7.8.1.txt b/Documentation/RelNotes/1.7.8.1.txt new file mode 100644 index 0000000000..33dc948b94 --- /dev/null +++ b/Documentation/RelNotes/1.7.8.1.txt @@ -0,0 +1,38 @@ +Git v1.7.8.1 Release Notes +========================== + +Fixes since v1.7.8 +------------------ + + * In some codepaths (notably, checkout and merge), the ignore patterns + recorded in $GIT_DIR/info/exclude were not honored. They now are. + + * "git apply --check" did not error out when given an empty input + without any patch. + + * "git archive" mistakenly allowed remote clients to ask for commits + that are not at the tip of any ref. + + * "git checkout" and "git merge" treated in-tree .gitignore and exclude + file in $GIT_DIR/info/ directory inconsistently when deciding which + untracked files are ignored and expendable. + + * LF-to-CRLF streaming filter used when checking out a large-ish blob + fell into an infinite loop with a rare input. + + * The function header pattern for files with "diff=cpp" attribute did + not consider "type *funcname(type param1,..." as the beginning of a + function. + + * The error message from "git diff" and "git status" when they fail + to inspect changes in submodules did not report which submodule they + had trouble with. + + * After fetching from a remote that has very long refname, the reporting + output could have corrupted by overrunning a static buffer. + + * "git pack-objects" avoids creating cyclic dependencies among deltas + when seeing a broken packfile that records the same object in both + the deflated form and as a delta. + +Also contains minor fixes and documentation updates. diff --git a/Documentation/RelNotes/1.7.8.2.txt b/Documentation/RelNotes/1.7.8.2.txt new file mode 100644 index 0000000000..e74f4ef1ef --- /dev/null +++ b/Documentation/RelNotes/1.7.8.2.txt @@ -0,0 +1,71 @@ +Git v1.7.8.2 Release Notes +========================== + +Fixes since v1.7.8.1 +-------------------- + + * Porcelain commands like "git reset" did not distinguish deletions + and type-changes from ordinary modification, and reported them with + the same 'M' moniker. They now use 'D' (for deletion) and 'T' (for + type-change) to match "git status -s" and "git diff --name-status". + + * The configuration file parser used for sizes (e.g. bigFileThreshold) + did not correctly interpret 'g' suffix. + + * The replacement implemention for snprintf used on platforms with + native snprintf that is broken did not use va_copy correctly. + + * LF-to-CRLF streaming filter replaced all LF with CRLF, which might + be techinically correct but not friendly to people who are trying + to recover from earlier mistakes of using CRLF in the repository + data in the first place. It now refrains from doing so for LF that + follows a CR. + + * git native connection going over TCP (not over SSH) did not set + SO_KEEPALIVE option which failed to receive link layer errors. + + * "git branch -m <current branch> HEAD" is an obvious no-op but was not + allowed. + + * "git checkout -m" did not recreate the conflicted state in a "both + sides added, without any common ancestor version" conflict + situation. + + * "git cherry-pick $commit" (not a range) created an unnecessary + sequencer state and interfered with valid workflow to use the + command during a session to cherry-pick multiple commits. + + * You could make "git commit" segfault by giving the "--no-message" + option. + + * "fast-import" did not correctly update an existing notes tree, + possibly corrupting the fan-out. + + * "git fetch-pack" accepted unqualified refs that do not begin with + refs/ by mistake and compensated it by matching the refspec with + tail-match, which was doubly wrong. This broke fetching from a + repository with a funny named ref "refs/foo/refs/heads/master" and a + 'master' branch with "git fetch-pack refs/heads/master", as the + command incorrectly considered the former a "match". + + * "git log --follow" did not honor the rename threshold score given + with the -M option (e.g. "-M50%"). + + * "git mv" gave suboptimal error/warning messages when it overwrites + target files. It also did not pay attention to "-v" option. + + * Authenticated "git push" over dumb HTTP were broken with a recent + change and failed without asking for password when username is + given. + + * "git push" to an empty repository over HTTP were broken with a + recent change to the ref handling. + + * "git push -v" forgot how to be verbose by mistake. It now properly + becomes verbose when asked to. + + * When a "reword" action in "git rebase -i" failed to run "commit --amend", + we did not give the control back to the user to resolve the situation, and + instead kept the original commit log message. + +Also contains minor fixes and documentation updates. diff --git a/Documentation/RelNotes/1.7.8.3.txt b/Documentation/RelNotes/1.7.8.3.txt new file mode 100644 index 0000000000..a92714c14b --- /dev/null +++ b/Documentation/RelNotes/1.7.8.3.txt @@ -0,0 +1,16 @@ +Git v1.7.8.3 Release Notes +========================== + +Fixes since v1.7.8.2 +-------------------- + + * Attempt to fetch from an empty file pretending it to be a bundle did + not error out correctly. + + * gitweb did not correctly fall back to configured $fallback_encoding + that is not 'latin1'. + + * "git clone --depth $n" did not catch a non-number given as $n as an + error. + +Also contains minor fixes and documentation updates. diff --git a/Documentation/RelNotes/1.7.8.4.txt b/Documentation/RelNotes/1.7.8.4.txt new file mode 100644 index 0000000000..9bebdbf13d --- /dev/null +++ b/Documentation/RelNotes/1.7.8.4.txt @@ -0,0 +1,23 @@ +Git v1.7.8.4 Release Notes +========================== + +Fixes since v1.7.8.3 +-------------------- + + * The code to look up attributes for paths reused entries from a wrong + directory when two paths in question are in adjacent directories and + the name of the one directory is a prefix of the other. + + * A wildcard that matches deeper hierarchy given to the "diff-index" command, + e.g. "git diff-index HEAD -- '*.txt'", incorrectly reported additions of + matching files even when there is no change. + + * When producing a "thin pack" (primarily used in bundles and smart + HTTP transfers) out of a fully packed repository, we unnecessarily + avoided sending recent objects as a delta against objects we know + the other side has. + + * "git send-email" did not properly treat sendemail.multiedit as a + boolean (e.g. setting it to "false" did not turn it off). + +Also contains minor fixes and documentation updates. diff --git a/Documentation/RelNotes/1.7.8.5.txt b/Documentation/RelNotes/1.7.8.5.txt new file mode 100644 index 0000000000..011fd2a428 --- /dev/null +++ b/Documentation/RelNotes/1.7.8.5.txt @@ -0,0 +1,19 @@ +Git v1.7.8.5 Release Notes +========================== + +Fixes since v1.7.8.4 +-------------------- + + * Dependency on our thread-utils.h header file was missing for + objects that depend on it in the Makefile. + + * "git am" when fed an empty file did not correctly finish reading it + when it attempts to guess the input format. + + * "git grep -P" (when PCRE is enabled in the build) did not match the + beginning and the end of the line correctly with ^ and $. + + * "git rebase -m" tried to run "git notes copy" needlessly when + nothing was rewritten. + +Also contains minor fixes and documentation updates. diff --git a/Documentation/RelNotes/1.7.8.6.txt b/Documentation/RelNotes/1.7.8.6.txt new file mode 100644 index 0000000000..d9bf2b741a --- /dev/null +++ b/Documentation/RelNotes/1.7.8.6.txt @@ -0,0 +1,22 @@ +Git v1.7.8.6 Release Notes +========================== + +Fixes since v1.7.8.5 +-------------------- + + * An error message from 'git bundle' had an unmatched single quote pair in it. + + * 'git diff --histogram' option was not described. + + * Documentation for 'git rev-list' had minor formatting errors. + + * 'git imap-send' carried an unused dead code. + + * The way 'git fetch' implemented its connectivity check over + received objects was overly pessimistic, and wasted a lot of + cycles. + + * Various minor backports of fixes from the 'master' and the 'maint' + branch. + +Also contains minor fixes and documentation updates. diff --git a/Documentation/RelNotes/1.7.8.txt b/Documentation/RelNotes/1.7.8.txt new file mode 100644 index 0000000000..b4d90bba0f --- /dev/null +++ b/Documentation/RelNotes/1.7.8.txt @@ -0,0 +1,161 @@ +Git v1.7.8 Release Notes +======================== + +Updates since v1.7.7 +-------------------- + + * Some git-svn, git-gui, git-p4 (in contrib) and msysgit updates. + + * Updates to bash completion scripts. + + * The build procedure has been taught to take advantage of computed + dependency automatically when the complier supports it. + + * The date parser now accepts timezone designators that lack minutes + part and also has a colon between "hh:mm". + + * The contents of the /etc/mailname file, if exists, is used as the + default value of the hostname part of the committer/author e-mail. + + * "git am" learned how to read from patches generated by Hg. + + * "git archive" talking with a remote repository can report errors + from the remote side in a more informative way. + + * "git branch" learned an explicit --list option to ask for branches + listed, optionally with a glob matching pattern to limit its output. + + * "git check-attr" learned "--cached" option to look at .gitattributes + files from the index, not from the working tree. + + * Variants of "git cherry-pick" and "git revert" that take multiple + commits learned to "--continue" and "--abort". + + * "git daemon" gives more human readble error messages to clients + using ERR packets when appropriate. + + * Errors at the network layer is logged by "git daemon". + + * "git diff" learned "--minimal" option to spend extra cycles to come + up with a minimal patch output. + + * "git diff" learned "--function-context" option to show the whole + function as context that was affected by a change. + + * "git difftool" can be told to skip launching the tool for a path by + answering 'n' to its prompt. + + * "git fetch" learned to honor transfer.fsckobjects configuration to + validate the objects that were received from the other end, just like + "git receive-pack" (the receiving end of "git push") does. + + * "git fetch" makes sure that the set of objects it received from the + other end actually completes the history before updating the refs. + "git receive-pack" (the receiving end of "git push") learned to do the + same. + + * "git fetch" learned that fetching/cloning from a regular file on the + filesystem is not necessarily a request to unpack a bundle file; the + file could be ".git" with "gitdir: <path>" in it. + + * "git for-each-ref" learned "%(contents:subject)", "%(contents:body)" + and "%(contents:signature)". The last one is useful for signed tags. + + * "git grep" used to incorrectly pay attention to .gitignore files + scattered in the directory it was working in even when "--no-index" + option was used. It no longer does this. The "--exclude-standard" + option needs to be given to explicitly activate the ignore + mechanism. + + * "git grep" learned "--untracked" option, where given patterns are + searched in untracked (but not ignored) files as well as tracked + files in the working tree, so that matches in new but not yet + added files do not get missed. + + * The recursive merge backend no longer looks for meaningless + existing merges in submodules unless in the outermost merge. + + * "git log" and friends learned "--children" option. + + * "git ls-remote" learned to respond to "-h"(elp) requests. + + * "mediawiki" remote helper can interact with (surprise!) MediaWiki + with "git fetch" & "git push". + + * "git merge" learned the "--edit" option to allow users to edit the + merge commit log message. + + * "git rebase -i" can be told to use special purpose editor suitable + only for its insn sheet via sequence.editor configuration variable. + + * "git send-email" learned to respond to "-h"(elp) requests. + + * "git send-email" allows the value given to sendemail.aliasfile to begin + with "~/" to refer to the $HOME directory. + + * "git send-email" forces use of Authen::SASL::Perl to work around + issues between Authen::SASL::Cyrus and AUTH PLAIN/LOGIN. + + * "git stash" learned "--include-untracked" option to stash away + untracked/ignored cruft from the working tree. + + * "git submodule clone" does not leak an error message to the UI + level unnecessarily anymore. + + * "git submodule update" learned to honor "none" as the value for + submodule.<name>.update to specify that the named submodule should + not be checked out by default. + + * When populating a new submodule directory with "git submodule init", + the $GIT_DIR metainformation directory for submodules is created inside + $GIT_DIR/modules/<name>/ directory of the superproject and referenced + via the gitfile mechanism. This is to make it possible to switch + between commits in the superproject that has and does not have the + submodule in the tree without re-cloning. + + * "gitweb" leaked unescaped control characters from syntax hiliter + outputs. + + * "gitweb" can be told to give custom string at the end of the HTML + HEAD element. + + * "gitweb" now has its own manual pages. + + +Also contains other documentation updates and minor code cleanups. + + +Fixes since v1.7.7 +------------------ + +Unless otherwise noted, all fixes in the 1.7.7.X maintenance track are +included in this release. + + * HTTP transport did not use pushurl correctly, and also did not tell + what host it is trying to authenticate with when asking for + credentials. + (merge deba493 jk/http-auth later to maint). + + * "git blame" was aborted if started from an uncommitted content and + the path had the textconv filter in effect. + (merge 8518088 ss/blame-textconv-fake-working-tree later to maint). + + * Adding many refs to the local repository in one go (e.g. "git fetch" + that fetches many tags) and looking up a ref by name in a repository + with too many refs were unnecessarily slow. + (merge 17d68a54d jp/get-ref-dir-unsorted later to maint). + + * Report from "git commit" on untracked files was confused under + core.ignorecase option. + (merge 395c7356 jk/name-hash-dirent later to maint). + + * "git merge" did not understand ":/<pattern>" as a way to name a commit. + + " "git push" on the receiving end used to call post-receive and post-update + hooks for attempted removal of non-existing refs. + (merge 160b81ed ph/push-to-delete-nothing later to maint). + + * Help text for "git remote set-url" and "git remote set-branches" + were misspelled. + (merge c49904e fc/remote-seturl-usage-fix later to maint). + (merge 656cdf0 jc/remote-setbranches-usage-fix later to maint). diff --git a/Documentation/RelNotes/1.7.9.1.txt b/Documentation/RelNotes/1.7.9.1.txt new file mode 100644 index 0000000000..6957183dbb --- /dev/null +++ b/Documentation/RelNotes/1.7.9.1.txt @@ -0,0 +1,63 @@ +Git v1.7.9.1 Release Notes +========================== + +Fixes since v1.7.9 +------------------ + + * The makefile allowed environment variable X seep into it result in + command names suffixed with unnecessary strings. + + * The set of included header files in compat/inet-{ntop,pton} + wrappers was updated for Windows some time ago, but in a way that + broke Solaris build. + + * rpmbuild noticed an unpackaged but installed *.mo file and failed. + + * Subprocesses spawned from various git programs were often left running + to completion even when the top-level process was killed. + + * "git add -e" learned not to show a diff for an otherwise unmodified + submodule that only has uncommitted local changes in the patch + prepared by for the user to edit. + + * Typo in "git branch --edit-description my-tpoic" was not diagnosed. + + * Using "git grep -l/-L" together with options -W or --break may not + make much sense as the output is to only count the number of hits + and there is no place for file breaks, but the latter options made + "-l/-L" to miscount the hits. + + * "git log --first-parent $pathspec" did not stay on the first parent + chain and veered into side branch from which the whole change to the + specified paths came. + + * "git merge --no-edit $tag" failed to honor the --no-edit option. + + * "git merge --ff-only $tag" failed because it cannot record the + required mergetag without creating a merge, but this is so common + operation for branch that is used _only_ to follow the upstream, so + it was changed to allow fast-forwarding without recording the mergetag. + + * "git mergetool" now gives an empty file as the common base version + to the backend when dealing with the "both sides added, differently" + case. + + * "git push -q" was not sufficiently quiet. + + * When "git push" fails to update any refs, the client side did not + report an error correctly to the end user. + + * "rebase" and "commit --amend" failed to work on commits with ancient + timestamps near year 1970. + + * When asking for a tag to be pulled, "request-pull" did not show the + name of the tag prefixed with "tags/", which would have helped older + clients. + + * "git submodule add $path" forgot to recompute the name to be stored + in .gitmodules when the submodule at $path was once added to the + superproject and already initialized. + + * Many small corner case bugs on "git tag -n" was corrected. + +Also contains minor fixes and documentation updates. diff --git a/Documentation/RelNotes/1.7.9.2.txt b/Documentation/RelNotes/1.7.9.2.txt new file mode 100644 index 0000000000..e500da75dd --- /dev/null +++ b/Documentation/RelNotes/1.7.9.2.txt @@ -0,0 +1,69 @@ +Git v1.7.9.2 Release Notes +========================== + +Fixes since v1.7.9.1 +-------------------- + + * Bash completion script (in contrib/) did not like a pattern that + begins with a dash to be passed to __git_ps1 helper function. + + * Adaptation of the bash completion script (in contrib/) for zsh + incorrectly listed all subcommands when "git <TAB><TAB>" was given + to ask for list of porcelain subcommands. + + * The build procedure for profile-directed optimized binary was not + working very well. + + * Some systems need to explicitly link -lcharset to get locale_charset(). + + * t5541 ignored user-supplied port number used for HTTP server testing. + + * The error message emitted when we see an empty loose object was + not phrased correctly. + + * The code to ask for password did not fall back to the terminal + input when GIT_ASKPASS is set but does not work (e.g. lack of X + with GUI askpass helper). + + * We failed to give the true terminal width to any subcommand when + they are invoked with the pager, i.e. "git -p cmd". + + * map_user() was not rewriting its output correctly, which resulted + in the user visible symptom that "git blame -e" sometimes showed + excess '>' at the end of email addresses. + + * "git checkout -b" did not allow switching out of an unborn branch. + + * When you have both .../foo and .../foo.git, "git clone .../foo" did not + favor the former but the latter. + + * "git commit" refused to create a commit when entries added with + "add -N" remained in the index, without telling Git what their content + in the next commit should be. We should have created the commit without + these paths. + + * "git diff --stat" said "files", "insertions", and "deletions" even + when it is showing one "file", one "insertion" or one "deletion". + + * The output from "git diff --stat" for two paths that have the same + amount of changes showed graph bars of different length due to the + way we handled rounding errors. + + * "git grep" did not pay attention to -diff (hence -binary) attribute. + + * The transport programs (fetch, push, clone)ignored --no-progress + and showed progress when sending their output to a terminal. + + * Sometimes error status detected by a check in an earlier phase of + "git receive-pack" (the other end of "git push") was lost by later + checks, resulting in false indication of success. + + * "git rev-list --verify" sometimes skipped verification depending on + the phase of the moon, which dates back to 1.7.8.x series. + + * Search box in "gitweb" did not accept non-ASCII characters correctly. + + * Search interface of "gitweb" did not show multiple matches in the same file + correctly. + +Also contains minor fixes and documentation updates. diff --git a/Documentation/RelNotes/1.7.9.3.txt b/Documentation/RelNotes/1.7.9.3.txt new file mode 100644 index 0000000000..91c65012f9 --- /dev/null +++ b/Documentation/RelNotes/1.7.9.3.txt @@ -0,0 +1,51 @@ +Git v1.7.9.3 Release Notes +========================== + +Fixes since v1.7.9.2 +-------------------- + + * "git p4" (in contrib/) submit the changes to a wrong place when the + "--use-client-spec" option is set. + + * The config.mak.autogen generated by optional autoconf support tried + to link the binary with -lintl even when libintl.h is missing from + the system. + + * When the filter driver exits before reading the content before the + main git process writes the contents to be filtered to the pipe to + it, the latter could be killed with SIGPIPE instead of ignoring + such an event as an error. + + * "git add --refresh <pathspec>" used to warn about unmerged paths + outside the given pathspec. + + * The bulk check-in codepath in "git add" streamed contents that + needs smudge/clean filters without running them, instead of punting + and delegating to the codepath to run filters after slurping + everything to core. + + * "git branch --with $that" assumed incorrectly that the user will never + ask the question with nonsense value in $that. + + * "git bundle create" produced a corrupt bundle file upon seeing + commits with excessively long subject line. + + * When a remote helper exits before reading the blank line from the + main git process to signal the end of commands, the latter could be + killed with SIGPIPE. Instead we should ignore such event as a + non-error. + + * The commit log template given with "git merge --edit" did not have + a short instructive text like what "git commit" gives. + + * "git rev-list --verify-objects -q" omitted the extra verification + it needs to do over "git rev-list --objects -q" by mistake. + + * "gitweb" used to drop warnings in the log file when "heads" view is + accessed in a repository whose HEAD does not point at a valid + branch. + + * An invalid regular expression pattern given by an end user made + "gitweb" to return garbled response. + +Also contains minor fixes and documentation updates. diff --git a/Documentation/RelNotes/1.7.9.4.txt b/Documentation/RelNotes/1.7.9.4.txt new file mode 100644 index 0000000000..e5217a1889 --- /dev/null +++ b/Documentation/RelNotes/1.7.9.4.txt @@ -0,0 +1,24 @@ +Git v1.7.9.4 Release Notes +========================== + +Fixes since v1.7.9.3 +-------------------- + + * The code to synthesize the fake ancestor tree used by 3-way merge + fallback in "git am" was not prepared to read a patch created with + a non-standard -p<num> value. + + * "git bundle" did not record boundary commits correctly when there + are many of them. + + * "git diff-index" and its friends at the plumbing level showed the + "diff --git" header and nothing else for a path whose cached stat + info is dirty without actual difference when asked to produce a + patch. This was a longstanding bug that we could have fixed long + time ago. + + * "gitweb" did use quotemeta() to prepare search string when asked to + do a fixed-string project search, but did not use it by mistake and + used the user-supplied string instead. + +Also contains minor fixes and documentation updates. diff --git a/Documentation/RelNotes/1.7.9.5.txt b/Documentation/RelNotes/1.7.9.5.txt new file mode 100644 index 0000000000..95cc2bbf2c --- /dev/null +++ b/Documentation/RelNotes/1.7.9.5.txt @@ -0,0 +1,23 @@ +Git v1.7.9.5 Release Notes +========================== + +Fixes since v1.7.9.4 +-------------------- + + * When "git config" diagnoses an error in a configuration file and + shows the line number for the offending line, it miscounted if the + error was at the end of line. + + * "git fast-import" accepted "ls" command with an empty path by + mistake. + + * Various new-ish output decoration modes of "git grep" were not + documented in the manual's synopsis section. + + * The "remaining" subcommand to "git rerere" was not documented. + + * "gitweb" used to drop warnings in the log file when "heads" view is + accessed in a repository whose HEAD does not point at a valid + branch. + +Also contains minor fixes and documentation updates. diff --git a/Documentation/RelNotes/1.7.9.6.txt b/Documentation/RelNotes/1.7.9.6.txt new file mode 100644 index 0000000000..74bf8825e2 --- /dev/null +++ b/Documentation/RelNotes/1.7.9.6.txt @@ -0,0 +1,12 @@ +Git v1.7.9.6 Release Notes +========================== + +Fixes since v1.7.9.5 +-------------------- + + * "git merge $tag" to merge an annotated tag always opens the editor + during an interactive edit session. v1.7.10 series introduced an + environment variable GIT_MERGE_AUTOEDIT to help older scripts decline + this behaviour, but the maintenance track should also support it. + +Also contains minor fixes and documentation updates. diff --git a/Documentation/RelNotes/1.7.9.7.txt b/Documentation/RelNotes/1.7.9.7.txt new file mode 100644 index 0000000000..59667d0f2a --- /dev/null +++ b/Documentation/RelNotes/1.7.9.7.txt @@ -0,0 +1,13 @@ +Git v1.7.9.7 Release Notes +========================== + +Fixes since v1.7.9.6 +-------------------- + + * An error message from 'git bundle' had an unmatched single quote pair in it. + + * The way 'git fetch' implemented its connectivity check over + received objects was overly pessimistic, and wasted a lot of + cycles. + +Also contains minor fixes and documentation updates. diff --git a/Documentation/RelNotes/1.7.9.txt b/Documentation/RelNotes/1.7.9.txt new file mode 100644 index 0000000000..95320aad5d --- /dev/null +++ b/Documentation/RelNotes/1.7.9.txt @@ -0,0 +1,112 @@ +Git v1.7.9 Release Notes +======================== + +Updates since v1.7.8 +-------------------- + + * gitk updates accumulated since early 2011. + + * git-gui updated to 0.16.0. + + * git-p4 (in contrib/) updates. + + * Git uses gettext to translate its most common interface messages + into the user's language if translations are available and the + locale is appropriately set. Distributors can drop new PO files + in po/ to add new translations. + + * The code to handle username/password for HTTP transactions used in + "git push" & "git fetch" learned to talk "credential API" to + external programs to cache or store them, to allow integration with + platform native keychain mechanisms. + + * The input prompts in the terminal use our own getpass() replacement + when possible. HTTP transactions used to ask for the username without + echoing back what was typed, but with this change you will see it as + you type. + + * The internals of "revert/cherry-pick" have been tweaked to prepare + building more generic "sequencer" on top of the implementation that + drives them. + + * "git rev-parse FETCH_HEAD" after "git fetch" without specifying + what to fetch from the command line will now show the commit that + would be merged if the command were "git pull". + + * "git add" learned to stream large files directly into a packfile + instead of writing them into individual loose object files. + + * "git checkout -B <current branch> <elsewhere>" is a more intuitive + way to spell "git reset --keep <elsewhere>". + + * "git checkout" and "git merge" learned "--no-overwrite-ignore" option + to tell Git that untracked and ignored files are not expendable. + + * "git commit --amend" learned "--no-edit" option to say that the + user is amending the tree being recorded, without updating the + commit log message. + + * "git commit" and "git reset" re-learned the optimization to prime + the cache-tree information in the index, which makes it faster to + write a tree object out after the index entries are updated. + + * "git commit" detects and rejects an attempt to stuff NUL byte in + the commit log message. + + * "git commit" learned "-S" to GPG-sign the commit; this can be shown + with the "--show-signature" option to "git log". + + * fsck and prune are relatively lengthy operations that still go + silent while making the end-user wait. They learned to give progress + output like other slow operations. + + * The set of built-in function-header patterns for various languages + knows MATLAB. + + * "git log --format='<format>'" learned new %g[nNeE] specifiers to + show information from the reflog entries when walking the reflog + (i.e. with "-g"). + + * "git pull" can be used to fetch and merge an annotated/signed tag, + instead of the tip of a topic branch. The GPG signature from the + signed tag is recorded in the resulting merge commit for later + auditing. + + * "git log" learned "--show-signature" option to show the signed tag + that was merged that is embedded in the merge commit. It also can + show the signature made on the commit with "git commit -S". + + * "git branch --edit-description" can be used to add descriptive text + to explain what a topic branch is about. + + * "git fmt-merge-msg" learned to take the branch description into + account when preparing a merge summary that "git merge" records + when merging a local branch. + + * "git request-pull" has been updated to convey more information + useful for integrators to decide if a topic is worth merging and + what is pulled is indeed what the requestor asked to pull, + including: + + - the tip of the branch being requested to be merged; + - the branch description describing what the topic is about; + - the contents of the annotated tag, when requesting to pull a tag. + + * "git pull" learned to notice 'pull.rebase' configuration variable, + which serves as a global fallback for setting 'branch.<name>.rebase' + configuration variable per branch. + + * "git tag" learned "--cleanup" option to control how the whitespaces + and empty lines in tag message are cleaned up. + + * "gitweb" learned to show side-by-side diff. + +Also contains minor documentation updates and code clean-ups. + + +Fixes since v1.7.8 +------------------ + +Unless otherwise noted, all the fixes since v1.7.8 in the maintenance +releases are contained in this release (see release notes to them for +details). diff --git a/Documentation/blame-options.txt b/Documentation/blame-options.txt index e76195ac97..d4a51da464 100644 --- a/Documentation/blame-options.txt +++ b/Documentation/blame-options.txt @@ -117,5 +117,4 @@ commit. And the default value is 40. If there are more than one take effect. -h:: ---help:: Show help message. diff --git a/Documentation/config.txt b/Documentation/config.txt index 3bcf660e02..c081657be7 100644 --- a/Documentation/config.txt +++ b/Documentation/config.txt @@ -12,8 +12,9 @@ The configuration variables are used by both the git plumbing and the porcelains. The variables are divided into sections, wherein the fully qualified variable name of the variable itself is the last dot-separated segment and the section name is everything before the last -dot. The variable names are case-insensitive and only alphanumeric -characters are allowed. Some variables may appear multiple times. +dot. The variable names are case-insensitive, allow only alphanumeric +characters and `-`, and must start with an alphabetic character. Some +variables may appear multiple times. Syntax ~~~~~~ @@ -45,17 +46,19 @@ lines. Variables may belong directly to a section or to a given subsection. You can have `[section]` if you have `[section "subsection"]`, but you don't need to. -There is also a case insensitive alternative `[section.subsection]` syntax. -In this syntax, subsection names follow the same restrictions as for section -names. +There is also a deprecated `[section.subsection]` syntax. With this +syntax, the subsection name is converted to lower-case and is also +compared case sensitively. These subsection names follow the same +restrictions as section names. All the other lines (and the remainder of the line after the section header) are recognized as setting variables, in the form 'name = value'. If there is no equal sign on the line, the entire line is taken as 'name' and the variable is recognized as boolean "true". -The variable names are case-insensitive and only alphanumeric -characters and `-` are allowed. There can be more than one value -for a given variable; we say then that variable is multivalued. +The variable names are case-insensitive, allow only alphanumeric characters +and `-`, and must start with an alphabetic character. There can be more +than one value for a given variable; we say then that the variable is +multivalued. Leading and trailing whitespace in a variable value is discarded. Internal whitespace within a variable value is retained verbatim. @@ -83,6 +86,17 @@ customary UNIX fashion. Some variables may require a special value format. +Includes +~~~~~~~~ + +You can include one config file from another by setting the special +`include.path` variable to the name of the file to be included. The +included file is expanded immediately, as if its contents had been +found at the location of the include directive. If the value of the +`include.path` variable is a relative path, the path is considered to be +relative to the configuration file in which the include directive was +found. See below for examples. + Example ~~~~~~~ @@ -105,6 +119,10 @@ Example gitProxy="ssh" for "kernel.org" gitProxy=default-proxy ; for the rest + [include] + path = /path/to/foo.inc ; include by absolute path + path = foo ; expand "foo" relative to the current file + Variables ~~~~~~~~~ @@ -114,35 +132,32 @@ in the appropriate manual page. You will find a description of non-core porcelain configuration variables in the respective porcelain documentation. advice.*:: - When set to 'true', display the given optional help message. - When set to 'false', do not display. The configuration variables - are: + These variables control various optional help messages designed to + aid new users. All 'advice.*' variables default to 'true', and you + can tell Git that you do not need help by setting these to 'false': + -- pushNonFastForward:: Advice shown when linkgit:git-push[1] refuses - non-fast-forward refs. Default: true. + non-fast-forward refs. statusHints:: Directions on how to stage/unstage/add shown in the output of linkgit:git-status[1] and the template shown - when writing commit messages. Default: true. + when writing commit messages. commitBeforeMerge:: Advice shown when linkgit:git-merge[1] refuses to merge to avoid overwriting local changes. - Default: true. resolveConflict:: Advices shown by various commands when conflicts prevent the operation from being performed. - Default: true. implicitIdentity:: Advice on how to set your identity configuration when your information is guessed from the system username and - domain name. Default: true. - + domain name. detachedHead:: - Advice shown when you used linkgit::git-checkout[1] to + Advice shown when you used linkgit:git-checkout[1] to move to the detach HEAD state, to instruct how to create - a local branch after the fact. Default: true. + a local branch after the fact. -- core.fileMode:: @@ -473,6 +488,12 @@ core.editor:: variable when it is set, and the environment variable `GIT_EDITOR` is not set. See linkgit:git-var[1]. +sequence.editor:: + Text editor used by `git rebase -i` for editing the rebase insn file. + The value is meant to be interpreted by the shell when it is used. + It can be overridden by the `GIT_SEQUENCE_EDITOR` environment variable. + When not configured the default commit message editor is used instead. + core.pager:: The command that git will use to paginate output. Can be overridden with the `GIT_PAGER` environment @@ -670,10 +691,12 @@ branch.<name>.mergeoptions:: branch.<name>.rebase:: When true, rebase the branch <name> on top of the fetched branch, instead of merging the default branch from the default remote when - "git pull" is run. - *NOTE*: this is a possibly dangerous operation; do *not* use - it unless you understand the implications (see linkgit:git-rebase[1] - for details). + "git pull" is run. See "pull.rebase" for doing this in a non + branch-specific manner. ++ +*NOTE*: this is a possibly dangerous operation; do *not* use +it unless you understand the implications (see linkgit:git-rebase[1] +for details). browser.<tool>.cmd:: Specify the command to invoke the specified browser. The @@ -825,6 +848,29 @@ commit.template:: "{tilde}/" is expanded to the value of `$HOME` and "{tilde}user/" to the specified user's home directory. +credential.helper:: + Specify an external helper to be called when a username or + password credential is needed; the helper may consult external + storage to avoid prompting the user for the credentials. See + linkgit:gitcredentials[7] for details. + +credential.useHttpPath:: + When acquiring credentials, consider the "path" component of an http + or https URL to be important. Defaults to false. See + linkgit:gitcredentials[7] for more information. + +credential.username:: + If no username is set for a network authentication, use this username + by default. See credential.<context>.* below, and + linkgit:gitcredentials[7]. + +credential.<url>.*:: + Any of the credential.* options above can be applied selectively to + some credentials. For example "credential.https://example.com.username" + would set the default username only for https connections to + example.com. See linkgit:gitcredentials[7] for details on how URLs are + matched. + include::diff-config.txt[] difftool.<tool>.path:: @@ -857,6 +903,13 @@ fetch.recurseSubmodules:: when its superproject retrieves a commit that updates the submodule's reference. +fetch.fsckObjects:: + If it is set to true, git-fetch-pack will check all fetched + objects. It will abort in the case of a malformed object or a + broken link. The result of an abort are only dangling objects. + Defaults to false. If not set, the value of `transfer.fsckObjects` + is used instead. + fetch.unpackLimit:: If the number of objects fetched over the git native transfer is below this @@ -1064,12 +1117,40 @@ All gitcvs variables except for 'gitcvs.usecrlfattr' and is one of "ext" and "pserver") to make them apply only for the given access method. +gitweb.category:: +gitweb.description:: +gitweb.owner:: +gitweb.url:: + See linkgit:gitweb[1] for description. + +gitweb.avatar:: +gitweb.blame:: +gitweb.grep:: +gitweb.highlight:: +gitweb.patches:: +gitweb.pickaxe:: +gitweb.remote_heads:: +gitweb.showsizes:: +gitweb.snapshot:: + See linkgit:gitweb.conf[5] for description. + grep.lineNumber:: If set to true, enable '-n' option by default. grep.extendedRegexp:: If set to true, enable '--extended-regexp' option by default. +gpg.program:: + Use this custom program instead of "gpg" found on $PATH when + making or verifying a PGP signature. The program must support the + same command line interface as GPG, namely, to verify a detached + signature, "gpg --verify $file - <$signature" is run, and the + program is expected to signal a good signature by exiting with + code 0, and to generate an ascii-armored detached signature, the + standard input of "gpg -bsau $key" is fed with the contents to be + signed, and the program is expected to send the result to its + standard output. + gui.commitmsgwidth:: Defines how wide the commit message window is in the linkgit:git-gui[1]. "75" is the default. @@ -1194,9 +1275,10 @@ help.autocorrect:: This is the default. http.proxy:: - Override the HTTP proxy, normally configured using the 'http_proxy' - environment variable (see linkgit:curl[1]). This can be overridden - on a per-remote basis; see remote.<name>.proxy + Override the HTTP proxy, normally configured using the 'http_proxy', + 'https_proxy', and 'all_proxy' environment variables (see + `curl(1)`). This can be overridden on a per-remote basis; see + remote.<name>.proxy http.cookiefile:: File containing previously stored cookie lines which should be used @@ -1559,6 +1641,16 @@ pretty.<name>:: Note that an alias with the same name as a built-in format will be silently ignored. +pull.rebase:: + When true, rebase branches on top of the fetched branch, instead + of merging the default branch from the default remote when "git + pull" is run. See "branch.<name>.rebase" for setting this on a + per-branch basis. ++ +*NOTE*: this is a possibly dangerous operation; do *not* use +it unless you understand the implications (see linkgit:git-rebase[1] +for details). + pull.octopus:: The default merge strategy to use when pulling multiple branches at once. @@ -1596,7 +1688,8 @@ receive.fsckObjects:: If it is set to true, git-receive-pack will check all received objects. It will abort in the case of a malformed object or a broken link. The result of an abort are only dangling objects. - Defaults to false. + Defaults to false. If not set, the value of `transfer.fsckObjects` + is used instead. receive.unpackLimit:: If the number of objects received in a push is below this @@ -1832,6 +1925,11 @@ tar.umask:: archiving user's umask will be used instead. See umask(2) and linkgit:git-archive[1]. +transfer.fsckObjects:: + When `fetch.fsckObjects` or `receive.fsckObjects` are + not set, the value of this variable is used instead. + Defaults to false. + transfer.unpackLimit:: When `fetch.unpackLimit` or `receive.unpackLimit` are not set, the value of this variable is used instead. diff --git a/Documentation/diff-config.txt b/Documentation/diff-config.txt index 1aed79e7dc..6aa1be0478 100644 --- a/Documentation/diff-config.txt +++ b/Documentation/diff-config.txt @@ -52,6 +52,10 @@ directories with less than 10% of the total amount of changed files, and accumulating child directory counts in the parent directories: `files,10,cumulative`. +diff.statGraphWidth:: + Limit the width of the graph part in --stat output. If set, applies + to all commands generating --stat outuput except format-patch. + diff.external:: If this config variable is set, diff generation is not performed using the internal diff machinery, but using the diff --git a/Documentation/diff-options.txt b/Documentation/diff-options.txt index de2206bd5c..378f19f0e2 100644 --- a/Documentation/diff-options.txt +++ b/Documentation/diff-options.txt @@ -56,13 +56,19 @@ endif::git-format-patch[] Generate a diff using the "histogram diff" algorithm. --stat[=<width>[,<name-width>[,<count>]]]:: - Generate a diffstat. You can override the default - output width for 80-column terminal by `--stat=<width>`. - The width of the filename part can be controlled by - giving another width to it separated by a comma. + Generate a diffstat. By default, as much space as necessary + will be used for the filename part, and the rest for the graph + part. Maximum width defaults to terminal width, or 80 columns + if not connected to a terminal, and can be overriden by + `<width>`. The width of the filename part can be limited by + giving another width `<name-width>` after a comma. The width + of the graph part can be limited by using + `--stat-graph-width=<width>` (affects all commands generating + a stat graph) or by setting `diff.statGraphWidth=<width>` + (does not affect `git format-patch`). By giving a third parameter `<count>`, you can limit the - output to the first `<count>` lines, followed by - `...` if there are more. + output to the first `<count>` lines, followed by `...` if + there are more. + These parameters can also be set individually with `--stat-width=<width>`, `--stat-name-width=<name-width>` and `--stat-count=<count>`. @@ -159,11 +165,12 @@ any of those replacements occurred. of the `--diff-filter` option on what the status letters mean. --submodule[=<format>]:: - Chose the output format for submodule differences. <format> can be one of - 'short' and 'log'. 'short' just shows pairs of commit names, this format - is used when this option is not given. 'log' is the default value for this - option and lists the commits in that commit range like the 'summary' - option of linkgit:git-submodule[1] does. + Specify how differences in submodules are shown. When `--submodule` + or `--submodule=log` is given, the 'log' format is used. This format lists + the commits in the range like linkgit:git-submodule[1] `summary` does. + Omitting the `--submodule` option or specifying `--submodule=short`, + uses the 'short' format. This format just shows the names of the commits + at the beginning and end of the range. --color[=<when>]:: Show colored diff. @@ -411,6 +418,10 @@ endif::git-format-patch[] Show the context between diff hunks, up to the specified number of lines, thereby fusing hunks that are close to each other. +-W:: +--function-context:: + Show whole surrounding functions of changes. + ifndef::git-format-patch[] ifndef::git-log[] --exit-code:: diff --git a/Documentation/git-am.txt b/Documentation/git-am.txt index 887466d777..ee6cca2e13 100644 --- a/Documentation/git-am.txt +++ b/Documentation/git-am.txt @@ -40,6 +40,9 @@ OPTIONS --keep:: Pass `-k` flag to 'git mailinfo' (see linkgit:git-mailinfo[1]). +--keep-non-patch:: + Pass `-b` flag to 'git mailinfo' (see linkgit:git-mailinfo[1]). + --keep-cr:: --no-keep-cr:: With `--keep-cr`, call 'git mailsplit' (see linkgit:git-mailsplit[1]) diff --git a/Documentation/git-branch.txt b/Documentation/git-branch.txt index 507b8d0ab2..6410c3d345 100644 --- a/Documentation/git-branch.txt +++ b/Documentation/git-branch.txt @@ -9,18 +9,23 @@ SYNOPSIS -------- [verse] 'git branch' [--color[=<when>] | --no-color] [-r | -a] - [-v [--abbrev=<length> | --no-abbrev]] - [(--merged | --no-merged | --contains) [<commit>]] + [--list] [-v [--abbrev=<length> | --no-abbrev]] + [(--merged | --no-merged | --contains) [<commit>]] [<pattern>...] 'git branch' [--set-upstream | --track | --no-track] [-l] [-f] <branchname> [<start-point>] 'git branch' (-m | -M) [<oldbranch>] <newbranch> 'git branch' (-d | -D) [-r] <branchname>... +'git branch' --edit-description [<branchname>] DESCRIPTION ----------- With no arguments, existing branches are listed and the current branch will be highlighted with an asterisk. Option `-r` causes the remote-tracking -branches to be listed, and option `-a` shows both. +branches to be listed, and option `-a` shows both. This list mode is also +activated by the `--list` option (see below). +<pattern> restricts the output to matching branches, the pattern is a shell +wildcard (i.e., matched using fnmatch(3)). +Multiple patterns may be given; if any of them matches, the branch is shown. With `--contains`, shows only the branches that contain the named commit (in other words, the branches whose tip commits are descendants of the @@ -44,7 +49,7 @@ the remote-tracking branch. This behavior may be changed via the global overridden by using the `--track` and `--no-track` options, and changed later using `git branch --set-upstream`. -With a '-m' or '-M' option, <oldbranch> will be renamed to <newbranch>. +With a `-m` or `-M` option, <oldbranch> will be renamed to <newbranch>. If <oldbranch> had a corresponding reflog, it is renamed to match <newbranch>, and a reflog entry is created to remember the branch renaming. If <newbranch> exists, -M must be used to force the rename @@ -54,7 +59,7 @@ With a `-d` or `-D` option, `<branchname>` will be deleted. You may specify more than one branch for deletion. If the branch currently has a reflog then the reflog will also be deleted. -Use -r together with -d to delete remote-tracking branches. Note, that it +Use `-r` together with `-d` to delete remote-tracking branches. Note, that it only makes sense to delete remote-tracking branches if they no longer exist in the remote repository or if 'git fetch' was configured not to fetch them again. See also the 'prune' subcommand of linkgit:git-remote[1] for a @@ -64,6 +69,7 @@ way to clean up all obsolete remote-tracking branches. OPTIONS ------- -d:: +--delete:: Delete a branch. The branch must be fully merged in its upstream branch, or in `HEAD` if no upstream was set with `--track` or `--set-upstream`. @@ -72,6 +78,7 @@ OPTIONS Delete a branch irrespective of its merged status. -l:: +--create-reflog:: Create the branch's reflog. This activates recording of all changes made to the branch ref, enabling use of date based sha1 expressions such as "<branchname>@\{yesterday}". @@ -84,6 +91,7 @@ OPTIONS already. Without `-f` 'git branch' refuses to change an existing branch. -m:: +--move:: Move/rename a branch and the corresponding reflog. -M:: @@ -100,14 +108,21 @@ OPTIONS Same as `--color=never`. -r:: +--remotes:: List or delete (if used with -d) the remote-tracking branches. -a:: +--all:: List both remote-tracking branches and local branches. +--list:: + Activate the list mode. `git branch <pattern>` would try to create a branch, + use `git branch --list <pattern>` to list matching branches. + -v:: --verbose:: - Show sha1 and commit subject line for each head, along with + When in list mode, + show sha1 and commit subject line for each head, along with relationship to upstream branch (if any). If given twice, print the name of the upstream branch, as well. @@ -139,13 +154,18 @@ start-point is either a local or remote-tracking branch. branch.autosetupmerge configuration variable is true. --set-upstream:: - If specified branch does not exist yet or if '--force' has been - given, acts exactly like '--track'. Otherwise sets up configuration - like '--track' would when creating the branch, except that where + If specified branch does not exist yet or if `--force` has been + given, acts exactly like `--track`. Otherwise sets up configuration + like `--track` would when creating the branch, except that where branch points to is not changed. ---contains <commit>:: - Only list branches which contain the specified commit. +--edit-description:: + Open an editor and edit the text to explain what the branch is + for, to be used by various other commands (e.g. `request-pull`). + +--contains [<commit>]:: + Only list branches which contain the specified commit (HEAD + if not specified). --merged [<commit>]:: Only list branches whose tips are reachable from the diff --git a/Documentation/git-check-attr.txt b/Documentation/git-check-attr.txt index 1f7312a189..5abdbaa51c 100644 --- a/Documentation/git-check-attr.txt +++ b/Documentation/git-check-attr.txt @@ -24,6 +24,9 @@ OPTIONS paths. If this option is used, then 'unspecified' attributes will not be included in the output. +--cached:: + Consider `.gitattributes` in the index only, ignoring the working tree. + --stdin:: Read file names from stdin instead of from the command-line. diff --git a/Documentation/git-check-ref-format.txt b/Documentation/git-check-ref-format.txt index c9fdf84a08..103e7b128d 100644 --- a/Documentation/git-check-ref-format.txt +++ b/Documentation/git-check-ref-format.txt @@ -8,8 +8,9 @@ git-check-ref-format - Ensures that a reference name is well formed SYNOPSIS -------- [verse] -'git check-ref-format' <refname> -'git check-ref-format' --print <refname> +'git check-ref-format' [--normalize] + [--[no-]allow-onelevel] [--refspec-pattern] + <refname> 'git check-ref-format' --branch <branchname-shorthand> DESCRIPTION @@ -28,22 +29,28 @@ git imposes the following rules on how references are named: . They can include slash `/` for hierarchical (directory) grouping, but no slash-separated component can begin with a - dot `.`. + dot `.` or end with the sequence `.lock`. . They must contain at least one `/`. This enforces the presence of a category like `heads/`, `tags/` etc. but the actual names are not - restricted. + restricted. If the `--allow-onelevel` option is used, this rule + is waived. . They cannot have two consecutive dots `..` anywhere. . They cannot have ASCII control characters (i.e. bytes whose values are lower than \040, or \177 `DEL`), space, tilde `~`, - caret `{caret}`, colon `:`, question-mark `?`, asterisk `*`, - or open bracket `[` anywhere. + caret `{caret}`, or colon `:` anywhere. -. They cannot end with a slash `/` nor a dot `.`. +. They cannot have question-mark `?`, asterisk `{asterisk}`, or open + bracket `[` anywhere. See the `--refspec-pattern` option below for + an exception to this rule. -. They cannot end with the sequence `.lock`. +. They cannot begin or end with a slash `/` or contain multiple + consecutive slashes (see the `--normalize` option below for an + exception to this rule) + +. They cannot end with a dot `.`. . They cannot contain a sequence `@{`. @@ -68,16 +75,36 @@ reference name expressions (see linkgit:gitrevisions[7]): . at-open-brace `@{` is used as a notation to access a reflog entry. -With the `--print` option, if 'refname' is acceptable, it prints the -canonicalized name of a hypothetical reference with that name. That is, -it prints 'refname' with any extra `/` characters removed. - With the `--branch` option, it expands the ``previous branch syntax'' `@{-n}`. For example, `@{-1}` is a way to refer the last branch you were on. This option should be used by porcelains to accept this syntax anywhere a branch name is expected, so they can act as if you typed the branch name. +OPTIONS +------- +--allow-onelevel:: +--no-allow-onelevel:: + Controls whether one-level refnames are accepted (i.e., + refnames that do not contain multiple `/`-separated + components). The default is `--no-allow-onelevel`. + +--refspec-pattern:: + Interpret <refname> as a reference name pattern for a refspec + (as used with remote repositories). If this option is + enabled, <refname> is allowed to contain a single `{asterisk}` + in place of a one full pathname component (e.g., + `foo/{asterisk}/bar` but not `foo/bar{asterisk}`). + +--normalize:: + Normalize 'refname' by removing any leading slash (`/`) + characters and collapsing runs of adjacent slashes between + name components into a single slash. Iff the normalized + refname is valid then print it to standard output and exit + with a status of 0. (`--print` is a deprecated way to spell + `--normalize`.) + + EXAMPLES -------- @@ -90,7 +117,7 @@ $ git check-ref-format --branch @{-1} * Determine the reference name to use for a new branch: + ------------ -$ ref=$(git check-ref-format --print "refs/heads/$newbranch") || +$ ref=$(git check-ref-format --normalize "refs/heads/$newbranch") || die "we do not like '$newbranch' as a branch name." ------------ diff --git a/Documentation/git-cherry-pick.txt b/Documentation/git-cherry-pick.txt index 7cfa3d92ac..fed5097e00 100644 --- a/Documentation/git-cherry-pick.txt +++ b/Documentation/git-cherry-pick.txt @@ -9,6 +9,9 @@ SYNOPSIS -------- [verse] 'git cherry-pick' [--edit] [-n] [-m parent-number] [-s] [-x] [--ff] <commit>... +'git cherry-pick' --continue +'git cherry-pick' --quit +'git cherry-pick' --abort DESCRIPTION ----------- @@ -110,6 +113,10 @@ effect to your index in a row. Pass the merge strategy-specific option through to the merge strategy. See linkgit:git-merge[1] for details. +SEQUENCER SUBCOMMANDS +--------------------- +include::sequencer.txt[] + EXAMPLES -------- `git cherry-pick master`:: diff --git a/Documentation/git-clone.txt b/Documentation/git-clone.txt index 4b8b26b75e..6e22522c4f 100644 --- a/Documentation/git-clone.txt +++ b/Documentation/git-clone.txt @@ -13,7 +13,8 @@ SYNOPSIS [-l] [-s] [--no-hardlinks] [-q] [-n] [--bare] [--mirror] [-o <name>] [-b <name>] [-u <upload-pack>] [--reference <repository>] [--separate-git-dir <git dir>] - [--depth <depth>] [--recursive|--recurse-submodules] [--] <repository> + [--depth <depth>] [--[no-]single-branch] + [--recursive|--recurse-submodules] [--] <repository> [<directory>] DESCRIPTION @@ -146,8 +147,9 @@ objects from the source repository into a pack in the cloned repository. -b <name>:: Instead of pointing the newly created HEAD to the branch pointed to by the cloned repository's HEAD, point to `<name>` branch - instead. In a non-bare repository, this is the branch that will - be checked out. + instead. `--branch` can also take tags and treat them like + detached HEAD. In a non-bare repository, this is the branch + that will be checked out. --upload-pack <upload-pack>:: -u <upload-pack>:: @@ -179,6 +181,14 @@ objects from the source repository into a pack in the cloned repository. with a long history, and would want to send in fixes as patches. +--single-branch:: + Clone only the history leading to the tip of a single branch, + either specified by the `--branch` option or the primary + branch remote's `HEAD` points at. When creating a shallow + clone with the `--depth` option, this is the default, unless + `--no-single-branch` is given to fetch the histories near the + tips of all branches. + --recursive:: --recurse-submodules:: After the clone is created, initialize all submodules within, diff --git a/Documentation/git-commit-tree.txt b/Documentation/git-commit-tree.txt index 0fdb82ee86..cfb9906bb5 100644 --- a/Documentation/git-commit-tree.txt +++ b/Documentation/git-commit-tree.txt @@ -9,7 +9,8 @@ git-commit-tree - Create a new commit object SYNOPSIS -------- [verse] -'git commit-tree' <tree> [(-p <parent commit>)...] < changelog +'git commit-tree' <tree> [(-p <parent>)...] < changelog +'git commit-tree' [(-p <parent>)...] [(-m <message>)...] [(-F <file>)...] <tree> DESCRIPTION ----------- @@ -17,7 +18,8 @@ This is usually not what an end user wants to run directly. See linkgit:git-commit[1] instead. Creates a new commit object based on the provided tree object and -emits the new commit object id on stdout. +emits the new commit object id on stdout. The log message is read +from the standard input, unless `-m` or `-F` options are given. A commit object may have any number of parents. With exactly one parent, it is an ordinary commit. Having more than one parent makes @@ -39,9 +41,17 @@ OPTIONS <tree>:: An existing tree object --p <parent commit>:: +-p <parent>:: Each '-p' indicates the id of a parent commit object. +-m <message>:: + A paragraph in the commig log message. This can be given more than + once and each <message> becomes its own paragraph. + +-F <file>:: + Read the commit log message from the given file. Use `-` to read + from the standard input. + Commit Information ------------------ @@ -68,7 +78,9 @@ if set: In case (some of) these environment variables are not set, the information is taken from the configuration items user.name and user.email, or, if not -present, system user name and fully qualified hostname. +present, system user name and the hostname used for outgoing mail (taken +from `/etc/mailname` and falling back to the fully qualified hostname when +that file does not exist). A commit comment is read from stdin. If a changelog entry is not provided via "<" redirection, 'git commit-tree' will just wait @@ -90,6 +102,10 @@ Discussion include::i18n.txt[] +FILES +----- +/etc/mailname + SEE ALSO -------- linkgit:git-write-tree[1] diff --git a/Documentation/git-commit.txt b/Documentation/git-commit.txt index 5cc84a1391..68abfcacca 100644 --- a/Documentation/git-commit.txt +++ b/Documentation/git-commit.txt @@ -132,11 +132,14 @@ OPTIONS -t <file>:: --template=<file>:: - Use the contents of the given file as the initial version - of the commit message. The editor is invoked and you can - make subsequent changes. If a message is specified using - the `-m` or `-F` options, this option has no effect. This - overrides the `commit.template` configuration variable. + When editing the commit message, start the editor with the + contents in the given file. The `commit.template` configuration + variable is often used to give this option implicitly to the + command. This mechanism can be used by projects that want to + guide participants with some hints on what to write in the message + in what order. If the user exits the editor without editing the + message, the commit is aborted. This has no effect when a message + is given by other means, e.g. with the `-m` or `-F` options. -s:: --signoff:: diff --git a/Documentation/git-config.txt b/Documentation/git-config.txt index e7ecf5d803..81b03982e3 100644 --- a/Documentation/git-config.txt +++ b/Documentation/git-config.txt @@ -85,8 +85,11 @@ OPTIONS is not exactly one. --get-regexp:: - Like --get-all, but interprets the name as a regular expression. - Also outputs the key names. + Like --get-all, but interprets the name as a regular expression and + writes out the key names. Regular expression matching is currently + case-sensitive and done against a canonicalized version of the key + in which section and variable names are lowercased, but subsection + names are not. --global:: For writing options: write to global ~/.gitconfig file rather than @@ -178,6 +181,11 @@ See also <<FILES>>. Opens an editor to modify the specified config file; either '--system', '--global', or repository (default). +--includes:: +--no-includes:: + Respect `include.*` directives in config files when looking up + values. Defaults to on. + [[FILES]] FILES ----- diff --git a/Documentation/git-credential-cache--daemon.txt b/Documentation/git-credential-cache--daemon.txt new file mode 100644 index 0000000000..11edc5a173 --- /dev/null +++ b/Documentation/git-credential-cache--daemon.txt @@ -0,0 +1,26 @@ +git-credential-cache--daemon(1) +=============================== + +NAME +---- +git-credential-cache--daemon - temporarily store user credentials in memory + +SYNOPSIS +-------- +[verse] +git credential-cache--daemon <socket> + +DESCRIPTION +----------- + +NOTE: You probably don't want to invoke this command yourself; it is +started automatically when you use linkgit:git-credential-cache[1]. + +This command listens on the Unix domain socket specified by `<socket>` +for `git-credential-cache` clients. Clients may store and retrieve +credentials. Each credential is held for a timeout specified by the +client; once no credentials are held, the daemon exits. + +GIT +--- +Part of the linkgit:git[1] suite diff --git a/Documentation/git-credential-cache.txt b/Documentation/git-credential-cache.txt new file mode 100644 index 0000000000..f3d09c5d51 --- /dev/null +++ b/Documentation/git-credential-cache.txt @@ -0,0 +1,77 @@ +git-credential-cache(1) +======================= + +NAME +---- +git-credential-cache - helper to temporarily store passwords in memory + +SYNOPSIS +-------- +----------------------------- +git config credential.helper 'cache [options]' +----------------------------- + +DESCRIPTION +----------- + +This command caches credentials in memory for use by future git +programs. The stored credentials never touch the disk, and are forgotten +after a configurable timeout. The cache is accessible over a Unix +domain socket, restricted to the current user by filesystem permissions. + +You probably don't want to invoke this command directly; it is meant to +be used as a credential helper by other parts of git. See +linkgit:gitcredentials[7] or `EXAMPLES` below. + +OPTIONS +------- + +--timeout <seconds>:: + + Number of seconds to cache credentials (default: 900). + +--socket <path>:: + + Use `<path>` to contact a running cache daemon (or start a new + cache daemon if one is not started). Defaults to + `~/.git-credential-cache/socket`. If your home directory is on a + network-mounted filesystem, you may need to change this to a + local filesystem. + +CONTROLLING THE DAEMON +---------------------- + +If you would like the daemon to exit early, forgetting all cached +credentials before their timeout, you can issue an `exit` action: + +-------------------------------------- +git credential-cache exit +-------------------------------------- + +EXAMPLES +-------- + +The point of this helper is to reduce the number of times you must type +your username or password. For example: + +------------------------------------ +$ git config credential.helper cache +$ git push http://example.com/repo.git +Username: <type your username> +Password: <type your password> + +[work for 5 more minutes] +$ git push http://example.com/repo.git +[your credentials are used automatically] +------------------------------------ + +You can provide options via the credential.helper configuration +variable (this example drops the cache time to 5 minutes): + +------------------------------------------------------- +$ git config credential.helper 'cache --timeout=300' +------------------------------------------------------- + +GIT +--- +Part of the linkgit:git[1] suite diff --git a/Documentation/git-credential-store.txt b/Documentation/git-credential-store.txt new file mode 100644 index 0000000000..31093467d1 --- /dev/null +++ b/Documentation/git-credential-store.txt @@ -0,0 +1,75 @@ +git-credential-store(1) +======================= + +NAME +---- +git-credential-store - helper to store credentials on disk + +SYNOPSIS +-------- +------------------- +git config credential.helper 'store [options]' +------------------- + +DESCRIPTION +----------- + +NOTE: Using this helper will store your passwords unencrypted on disk, +protected only by filesystem permissions. If this is not an acceptable +security tradeoff, try linkgit:git-credential-cache[1], or find a helper +that integrates with secure storage provided by your operating system. + +This command stores credentials indefinitely on disk for use by future +git programs. + +You probably don't want to invoke this command directly; it is meant to +be used as a credential helper by other parts of git. See +linkgit:gitcredentials[7] or `EXAMPLES` below. + +OPTIONS +------- + +--store=<path>:: + + Use `<path>` to store credentials. The file will have its + filesystem permissions set to prevent other users on the system + from reading it, but will not be encrypted or otherwise + protected. Defaults to `~/.git-credentials`. + +EXAMPLES +-------- + +The point of this helper is to reduce the number of times you must type +your username or password. For example: + +------------------------------------------ +$ git config credential.helper store +$ git push http://example.com/repo.git +Username: <type your username> +Password: <type your password> + +[several days later] +$ git push http://example.com/repo.git +[your credentials are used automatically] +------------------------------------------ + +STORAGE FORMAT +-------------- + +The `.git-credentials` file is stored in plaintext. Each credential is +stored on its own line as a URL like: + +------------------------------ +https://user:pass@example.com +------------------------------ + +When git needs authentication for a particular URL context, +credential-store will consider that context a pattern to match against +each entry in the credentials file. If the protocol, hostname, and +username (if we already have one) match, then the password is returned +to git. See the discussion of configuration in linkgit:gitcredentials[7] +for more information. + +GIT +--- +Part of the linkgit:git[1] suite diff --git a/Documentation/git-daemon.txt b/Documentation/git-daemon.txt index 69a1e4af9e..31b28fc29f 100644 --- a/Documentation/git-daemon.txt +++ b/Documentation/git-daemon.txt @@ -161,6 +161,16 @@ the facility of inet daemon to achieve the same before spawning repository configuration. By default, all the services are overridable. +--informative-errors:: +--no-informative-errors:: + When informative errors are turned on, git-daemon will report + more verbose errors to the client, differentiating conditions + like "no such repository" from "repository not exported". This + is more convenient for clients, but may leak information about + the existence of unexported repositories. When informative + errors are not enabled, all errors report "access denied" to the + client. The default is --no-informative-errors. + <directory>:: A directory to add to the whitelist of allowed directories. Unless --strict-paths is specified this will also include subdirectories diff --git a/Documentation/git-difftool.txt b/Documentation/git-difftool.txt index 19d473c070..fe38f667f9 100644 --- a/Documentation/git-difftool.txt +++ b/Documentation/git-difftool.txt @@ -32,8 +32,9 @@ OPTIONS --tool=<tool>:: Use the diff tool specified by <tool>. Valid diff tools are: - araxis, bc3, diffuse, emerge, ecmerge, gvimdiff, kdiff3, - kompare, meld, opendiff, p4merge, tkdiff, vimdiff and xxdiff. + araxis, bc3, deltawalker, diffuse, emerge, ecmerge, gvimdiff, + kdiff3, kompare, meld, opendiff, p4merge, tkdiff, vimdiff and + xxdiff. + If a diff tool is not specified, 'git difftool' will use the configuration variable `diff.tool`. If the diff --git a/Documentation/git-fmt-merge-msg.txt b/Documentation/git-fmt-merge-msg.txt index 32aff954a2..3a0f55ec8e 100644 --- a/Documentation/git-fmt-merge-msg.txt +++ b/Documentation/git-fmt-merge-msg.txt @@ -53,6 +53,11 @@ OPTIONS CONFIGURATION ------------- +merge.branchdesc:: + In addition to branch names, populate the log message with + the branch description text associated with them. Defaults + to false. + merge.log:: In addition to branch names, populate the log message with at most the specified number of one-line descriptions from the diff --git a/Documentation/git-for-each-ref.txt b/Documentation/git-for-each-ref.txt index 152e695c81..c872b883ba 100644 --- a/Documentation/git-for-each-ref.txt +++ b/Documentation/git-for-each-ref.txt @@ -101,9 +101,10 @@ Fields that have name-email-date tuple as its value (`author`, `committer`, and `tagger`) can be suffixed with `name`, `email`, and `date` to extract the named component. -The first line of the message in a commit and tag object is -`subject`, the remaining lines are `body`. The whole message -is `contents`. +The complete message in a commit and tag object is `contents`. +Its first line is `contents:subject`, the remaining lines +are `contents:body` and the optional GPG signature +is `contents:signature`. For sorting purposes, fields with numeric values sort in numeric order (`objectsize`, `authordate`, `committerdate`, `taggerdate`). diff --git a/Documentation/git-fsck.txt b/Documentation/git-fsck.txt index a2a508dc28..bbb25da2dd 100644 --- a/Documentation/git-fsck.txt +++ b/Documentation/git-fsck.txt @@ -10,7 +10,8 @@ SYNOPSIS -------- [verse] 'git fsck' [--tags] [--root] [--unreachable] [--cache] [--no-reflogs] - [--[no-]full] [--strict] [--verbose] [--lost-found] [<object>*] + [--[no-]full] [--strict] [--verbose] [--lost-found] + [--[no-]dangling] [--[no-]progress] [<object>*] DESCRIPTION ----------- @@ -29,6 +30,11 @@ index file, all SHA1 references in .git/refs/*, and all reflogs (unless Print out objects that exist but that aren't reachable from any of the reference nodes. +--dangling:: +--no-dangling:: + Print objects that exist but that are never 'directly' used (default). + `--no-dangling` can be used to omit this information from the output. + --root:: Report root nodes. @@ -72,30 +78,28 @@ index file, all SHA1 references in .git/refs/*, and all reflogs (unless a blob, the contents are written into the file, rather than its object name. -It tests SHA1 and general object sanity, and it does full tracking of -the resulting reachability and everything else. It prints out any -corruption it finds (missing or bad objects), and if you use the -'--unreachable' flag it will also print out objects that exist but -that aren't reachable from any of the specified head nodes. - -So for example +--progress:: +--no-progress:: + Progress status is reported on the standard error stream by + default when it is attached to a terminal, unless + --no-progress or --verbose is specified. --progress forces + progress status even if the standard error stream is not + directed to a terminal. - git fsck --unreachable HEAD \ - $(git for-each-ref --format="%(objectname)" refs/heads) +DISCUSSION +---------- -will do quite a _lot_ of verification on the tree. There are a few -extra validity tests to be added (make sure that tree objects are -sorted properly etc), but on the whole if 'git fsck' is happy, you -do have a valid tree. +git-fsck tests SHA1 and general object sanity, and it does full tracking +of the resulting reachability and everything else. It prints out any +corruption it finds (missing or bad objects), and if you use the +'--unreachable' flag it will also print out objects that exist but that +aren't reachable from any of the specified head nodes (or the default +set, as mentioned above). Any corrupt objects you will have to find in backups or other archives (i.e., you can just remove them and do an 'rsync' with some other site in the hopes that somebody else has the object you have corrupted). -Of course, "valid tree" doesn't mean that it wasn't generated by some -evil person, and the end result might be crap. git is a revision -tracking system, not a quality assurance system ;) - Extracted Diagnostics --------------------- diff --git a/Documentation/git-grep.txt b/Documentation/git-grep.txt index e44a4988b7..343eadd407 100644 --- a/Documentation/git-grep.txt +++ b/Documentation/git-grep.txt @@ -20,10 +20,12 @@ SYNOPSIS [-c | --count] [--all-match] [-q | --quiet] [--max-depth <depth>] [--color[=<when>] | --no-color] + [--break] [--heading] [-p | --show-function] [-A <post-context>] [-B <pre-context>] [-C <context>] + [-W | --function-context] [-f <file>] [-e] <pattern> [--and|--or|--not|(|)|-e <pattern>...] - [--cached | --no-index | <tree>...] + [ [--exclude-standard] [--cached | --no-index | --untracked] | <tree>...] [--] [<pathspec>...] DESCRIPTION @@ -49,7 +51,20 @@ OPTIONS blobs registered in the index file. --no-index:: - Search files in the current directory, not just those tracked by git. + Search files in the current directory that is not managed by git. + +--untracked:: + In addition to searching in the tracked files in the working + tree, search also in untracked files. + +--no-exclude-standard:: + Also search in ignored files by not honoring the `.gitignore` + mechanism. Only useful with `--untracked`. + +--exclude-standard:: + Do not pay attention to ignored files specified via the `.gitignore` + mechanism. Only useful when searching files in the current directory + with `--no-index`. -a:: --text:: @@ -66,6 +81,9 @@ OPTIONS --max-depth <depth>:: For each <pathspec> given on command line, descend at most <depth> levels of directories. A negative value means no limit. + This option is ignored if <pathspec> contains active wildcards. + In other words if "a*" matches a directory named "a*", + "*" is matched literally so --max-depth is still effective. -w:: --word-regexp:: diff --git a/Documentation/git-instaweb.txt b/Documentation/git-instaweb.txt index ea95c90460..f3eef510f2 100644 --- a/Documentation/git-instaweb.txt +++ b/Documentation/git-instaweb.txt @@ -84,6 +84,10 @@ If the configuration variable 'instaweb.browser' is not set, 'web.browser' will be used instead if it is defined. See linkgit:git-web{litdd}browse[1] for more information about this. +SEE ALSO +-------- +linkgit:gitweb[1] + GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-mailinfo.txt b/Documentation/git-mailinfo.txt index 51dc325748..97e7a8e9e7 100644 --- a/Documentation/git-mailinfo.txt +++ b/Documentation/git-mailinfo.txt @@ -25,13 +25,24 @@ command directly. See linkgit:git-am[1] instead. OPTIONS ------- -k:: - Usually the program 'cleans up' the Subject: header line - to extract the title line for the commit log message, - among which (1) remove 'Re:' or 're:', (2) leading - whitespaces, (3) '[' up to ']', typically '[PATCH]', and - then prepends "[PATCH] ". This flag forbids this - munging, and is most useful when used to read back - 'git format-patch -k' output. + Usually the program removes email cruft from the Subject: + header line to extract the title line for the commit log + message. This option prevents this munging, and is most + useful when used to read back 'git format-patch -k' output. ++ +Specifically, the following are removed until none of them remain: ++ +-- +* Leading and trailing whitespace. + +* Leading `Re:`, `re:`, and `:`. + +* Leading bracketed strings (between `[` and `]`, usually + `[PATCH]`). +-- ++ +Finally, runs of whitespace are normalized to a single ASCII space +character. -b:: When -k is not in effect, all leading strings bracketed with '[' diff --git a/Documentation/git-merge.txt b/Documentation/git-merge.txt index e2e6aba17e..3ceefb8a1f 100644 --- a/Documentation/git-merge.txt +++ b/Documentation/git-merge.txt @@ -9,7 +9,7 @@ git-merge - Join two or more development histories together SYNOPSIS -------- [verse] -'git merge' [-n] [--stat] [--no-commit] [--squash] +'git merge' [-n] [--stat] [--no-commit] [--squash] [--[no-]edit] [-s <strategy>] [-X <strategy-option>] [--[no-]rerere-autoupdate] [-m <msg>] [<commit>...] 'git merge' <msg> HEAD <commit>... diff --git a/Documentation/git-mv.txt b/Documentation/git-mv.txt index b8db373964..e3c8448614 100644 --- a/Documentation/git-mv.txt +++ b/Documentation/git-mv.txt @@ -15,8 +15,8 @@ DESCRIPTION ----------- This script is used to move or rename a file, directory or symlink. - git mv [-f] [-n] <source> <destination> - git mv [-f] [-n] [-k] <source> ... <destination directory> + git mv [-v] [-f] [-n] [-k] <source> <destination> + git mv [-v] [-f] [-n] [-k] <source> ... <destination directory> In the first form, it renames <source>, which must exist and be either a file, symlink or directory, to <destination>. @@ -40,6 +40,10 @@ OPTIONS --dry-run:: Do nothing; only show what would happen +-v:: +--verbose:: + Report the names of files as they are moved. + GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-p4.txt b/Documentation/git-p4.txt new file mode 100644 index 0000000000..b7c7929716 --- /dev/null +++ b/Documentation/git-p4.txt @@ -0,0 +1,507 @@ +git-p4(1) +========= + +NAME +---- +git-p4 - Import from and submit to Perforce repositories + + +SYNOPSIS +-------- +[verse] +'git p4 clone' [<sync options>] [<clone options>] <p4 depot path>... +'git p4 sync' [<sync options>] [<p4 depot path>...] +'git p4 rebase' +'git p4 submit' [<submit options>] [<master branch name>] + + +DESCRIPTION +----------- +This command provides a way to interact with p4 repositories +using git. + +Create a new git repository from an existing p4 repository using +'git p4 clone', giving it one or more p4 depot paths. Incorporate +new commits from p4 changes with 'git p4 sync'. The 'sync' command +is also used to include new branches from other p4 depot paths. +Submit git changes back to p4 using 'git p4 submit'. The command +'git p4 rebase' does a sync plus rebases the current branch onto +the updated p4 remote branch. + + +EXAMPLE +------- +* Create an alias for 'git p4', using the full path to the 'git-p4' + script if needed: ++ +------------ +$ git config --global alias.p4 '!git-p4' +------------ + +* Clone a repository: ++ +------------ +$ git p4 clone //depot/path/project +------------ + +* Do some work in the newly created git repository: ++ +------------ +$ cd project +$ vi foo.h +$ git commit -a -m "edited foo.h" +------------ + +* Update the git repository with recent changes from p4, rebasing your + work on top: ++ +------------ +$ git p4 rebase +------------ + +* Submit your commits back to p4: ++ +------------ +$ git p4 submit +------------ + + +COMMANDS +-------- + +Clone +~~~~~ +Generally, 'git p4 clone' is used to create a new git directory +from an existing p4 repository: +------------ +$ git p4 clone //depot/path/project +------------ +This: + +1. Creates an empty git repository in a subdirectory called 'project'. ++ +2. Imports the full contents of the head revision from the given p4 +depot path into a single commit in the git branch 'refs/remotes/p4/master'. ++ +3. Creates a local branch, 'master' from this remote and checks it out. + +To reproduce the entire p4 history in git, use the '@all' modifier on +the depot path: +------------ +$ git p4 clone //depot/path/project@all +------------ + + +Sync +~~~~ +As development continues in the p4 repository, those changes can +be included in the git repository using: +------------ +$ git p4 sync +------------ +This command finds new changes in p4 and imports them as git commits. + +P4 repositories can be added to an existing git repository using +'git p4 sync' too: +------------ +$ mkdir repo-git +$ cd repo-git +$ git init +$ git p4 sync //path/in/your/perforce/depot +------------ +This imports the specified depot into +'refs/remotes/p4/master' in an existing git repository. The +'--branch' option can be used to specify a different branch to +be used for the p4 content. + +If a git repository includes branches 'refs/remotes/origin/p4', these +will be fetched and consulted first during a 'git p4 sync'. Since +importing directly from p4 is considerably slower than pulling changes +from a git remote, this can be useful in a multi-developer environment. + + +Rebase +~~~~~~ +A common working pattern is to fetch the latest changes from the p4 depot +and merge them with local uncommitted changes. Often, the p4 repository +is the ultimate location for all code, thus a rebase workflow makes +sense. This command does 'git p4 sync' followed by 'git rebase' to move +local commits on top of updated p4 changes. +------------ +$ git p4 rebase +------------ + + +Submit +~~~~~~ +Submitting changes from a git repository back to the p4 repository +requires a separate p4 client workspace. This should be specified +using the 'P4CLIENT' environment variable or the git configuration +variable 'git-p4.client'. The p4 client must exist, but the client root +will be created and populated if it does not already exist. + +To submit all changes that are in the current git branch but not in +the 'p4/master' branch, use: +------------ +$ git p4 submit +------------ + +To specify a branch other than the current one, use: +------------ +$ git p4 submit topicbranch +------------ + +The upstream reference is generally 'refs/remotes/p4/master', but can +be overridden using the '--origin=' command-line option. + +The p4 changes will be created as the user invoking 'git p4 submit'. The +'--preserve-user' option will cause ownership to be modified +according to the author of the git commit. This option requires admin +privileges in p4, which can be granted using 'p4 protect'. + + +OPTIONS +------- + +General options +~~~~~~~~~~~~~~~ +All commands except clone accept this option. + +--git-dir <dir>:: + Set the 'GIT_DIR' environment variable. See linkgit:git[1]. + +Sync options +~~~~~~~~~~~~ +These options can be used in the initial 'clone' as well as in +subsequent 'sync' operations. + +--branch <branch>:: + Import changes into given branch. If the branch starts with + 'refs/', it will be used as is, otherwise the path 'refs/heads/' + will be prepended. The default branch is 'master'. If used + with an initial clone, no HEAD will be checked out. ++ +This example imports a new remote "p4/proj2" into an existing +git repository: +---- + $ git init + $ git p4 sync --branch=refs/remotes/p4/proj2 //depot/proj2 +---- + +--detect-branches:: + Use the branch detection algorithm to find new paths in p4. It is + documented below in "BRANCH DETECTION". + +--changesfile <file>:: + Import exactly the p4 change numbers listed in 'file', one per + line. Normally, 'git p4' inspects the current p4 repository + state and detects the changes it should import. + +--silent:: + Do not print any progress information. + +--verbose:: + Provide more progress information. + +--detect-labels:: + Query p4 for labels associated with the depot paths, and add + them as tags in git. + +--import-local:: + By default, p4 branches are stored in 'refs/remotes/p4/', + where they will be treated as remote-tracking branches by + linkgit:git-branch[1] and other commands. This option instead + puts p4 branches in 'refs/heads/p4/'. Note that future + sync operations must specify '--import-local' as well so that + they can find the p4 branches in refs/heads. + +--max-changes <n>:: + Limit the number of imported changes to 'n'. Useful to + limit the amount of history when using the '@all' p4 revision + specifier. + +--keep-path:: + The mapping of file names from the p4 depot path to git, by + default, involves removing the entire depot path. With this + option, the full p4 depot path is retained in git. For example, + path '//depot/main/foo/bar.c', when imported from + '//depot/main/', becomes 'foo/bar.c'. With '--keep-path', the + git path is instead 'depot/main/foo/bar.c'. + +--use-client-spec:: + Use a client spec to find the list of interesting files in p4. + See the "CLIENT SPEC" section below. + +Clone options +~~~~~~~~~~~~~ +These options can be used in an initial 'clone', along with the 'sync' +options described above. + +--destination <directory>:: + Where to create the git repository. If not provided, the last + component in the p4 depot path is used to create a new + directory. + +--bare:: + Perform a bare clone. See linkgit:git-clone[1]. + +-/ <path>:: + Exclude selected depot paths when cloning. + +Submit options +~~~~~~~~~~~~~~ +These options can be used to modify 'git p4 submit' behavior. + +--verbose:: + Provide more progress information. + +--origin <commit>:: + Upstream location from which commits are identified to submit to + p4. By default, this is the most recent p4 commit reachable + from 'HEAD'. + +-M[<n>]:: + Detect renames. See linkgit:git-diff[1]. Renames will be + represented in p4 using explicit 'move' operations. There + is no corresponding option to detect copies, but there are + variables for both moves and copies. + +--preserve-user:: + Re-author p4 changes before submitting to p4. This option + requires p4 admin privileges. + + +DEPOT PATH SYNTAX +----------------- +The p4 depot path argument to 'git p4 sync' and 'git p4 clone' can +be one or more space-separated p4 depot paths, with an optional +p4 revision specifier on the end: + +"//depot/my/project":: + Import one commit with all files in the '#head' change under that tree. + +"//depot/my/project@all":: + Import one commit for each change in the history of that depot path. + +"//depot/my/project@1,6":: + Import only changes 1 through 6. + +"//depot/proj1@all //depot/proj2@all":: + Import all changes from both named depot paths into a single + repository. Only files below these directories are included. + There is not a subdirectory in git for each "proj1" and "proj2". + You must use the '--destination' option when specifying more + than one depot path. The revision specifier must be specified + identically on each depot path. If there are files in the + depot paths with the same name, the path with the most recently + updated version of the file is the one that appears in git. + +See 'p4 help revisions' for the full syntax of p4 revision specifiers. + + +CLIENT SPEC +----------- +The p4 client specification is maintained with the 'p4 client' command +and contains among other fields, a View that specifies how the depot +is mapped into the client repository. The 'clone' and 'sync' commands +can consult the client spec when given the '--use-client-spec' option or +when the useClientSpec variable is true. After 'git p4 clone', the +useClientSpec variable is automatically set in the repository +configuration file. This allows future 'git p4 submit' commands to +work properly; the submit command looks only at the variable and does +not have a command-line option. + +The full syntax for a p4 view is documented in 'p4 help views'. Git-p4 +knows only a subset of the view syntax. It understands multi-line +mappings, overlays with '+', exclusions with '-' and double-quotes +around whitespace. Of the possible wildcards, git-p4 only handles +'...', and only when it is at the end of the path. Git-p4 will complain +if it encounters an unhandled wildcard. + +Bugs in the implementation of overlap mappings exist. If multiple depot +paths map through overlays to the same location in the repository, +git-p4 can choose the wrong one. This is hard to solve without +dedicating a client spec just for git-p4. + +The name of the client can be given to git-p4 in multiple ways. The +variable 'git-p4.client' takes precedence if it exists. Otherwise, +normal p4 mechanisms of determining the client are used: environment +variable P4CLIENT, a file referenced by P4CONFIG, or the local host name. + + +BRANCH DETECTION +---------------- +P4 does not have the same concept of a branch as git. Instead, +p4 organizes its content as a directory tree, where by convention +different logical branches are in different locations in the tree. +The 'p4 branch' command is used to maintain mappings between +different areas in the tree, and indicate related content. 'git p4' +can use these mappings to determine branch relationships. + +If you have a repository where all the branches of interest exist as +subdirectories of a single depot path, you can use '--detect-branches' +when cloning or syncing to have 'git p4' automatically find +subdirectories in p4, and to generate these as branches in git. + +For example, if the P4 repository structure is: +---- +//depot/main/... +//depot/branch1/... +---- + +And "p4 branch -o branch1" shows a View line that looks like: +---- +//depot/main/... //depot/branch1/... +---- + +Then this 'git p4 clone' command: +---- +git p4 clone --detect-branches //depot@all +---- +produces a separate branch in 'refs/remotes/p4/' for //depot/main, +called 'master', and one for //depot/branch1 called 'depot/branch1'. + +However, it is not necessary to create branches in p4 to be able to use +them like branches. Because it is difficult to infer branch +relationships automatically, a git configuration setting +'git-p4.branchList' can be used to explicitly identify branch +relationships. It is a list of "source:destination" pairs, like a +simple p4 branch specification, where the "source" and "destination" are +the path elements in the p4 repository. The example above relied on the +presence of the p4 branch. Without p4 branches, the same result will +occur with: +---- +git config git-p4.branchList main:branch1 +git p4 clone --detect-branches //depot@all +---- + + +PERFORMANCE +----------- +The fast-import mechanism used by 'git p4' creates one pack file for +each invocation of 'git p4 sync'. Normally, git garbage compression +(linkgit:git-gc[1]) automatically compresses these to fewer pack files, +but explicit invocation of 'git repack -adf' may improve performance. + + +CONFIGURATION VARIABLES +----------------------- +The following config settings can be used to modify 'git p4' behavior. +They all are in the 'git-p4' section. + +General variables +~~~~~~~~~~~~~~~~~ +git-p4.user:: + User specified as an option to all p4 commands, with '-u <user>'. + The environment variable 'P4USER' can be used instead. + +git-p4.password:: + Password specified as an option to all p4 commands, with + '-P <password>'. + The environment variable 'P4PASS' can be used instead. + +git-p4.port:: + Port specified as an option to all p4 commands, with + '-p <port>'. + The environment variable 'P4PORT' can be used instead. + +git-p4.host:: + Host specified as an option to all p4 commands, with + '-h <host>'. + The environment variable 'P4HOST' can be used instead. + +git-p4.client:: + Client specified as an option to all p4 commands, with + '-c <client>', including the client spec. + +Clone and sync variables +~~~~~~~~~~~~~~~~~~~~~~~~ +git-p4.syncFromOrigin:: + Because importing commits from other git repositories is much faster + than importing them from p4, a mechanism exists to find p4 changes + first in git remotes. If branches exist under 'refs/remote/origin/p4', + those will be fetched and used when syncing from p4. This + variable can be set to 'false' to disable this behavior. + +git-p4.branchUser:: + One phase in branch detection involves looking at p4 branches + to find new ones to import. By default, all branches are + inspected. This option limits the search to just those owned + by the single user named in the variable. + +git-p4.branchList:: + List of branches to be imported when branch detection is + enabled. Each entry should be a pair of branch names separated + by a colon (:). This example declares that both branchA and + branchB were created from main: +------------- +git config git-p4.branchList main:branchA +git config --add git-p4.branchList main:branchB +------------- + +git-p4.useClientSpec:: + Specify that the p4 client spec should be used to identify p4 + depot paths of interest. This is equivalent to specifying the + option '--use-client-spec'. See the "CLIENT SPEC" section above. + This variable is a boolean, not the name of a p4 client. + +Submit variables +~~~~~~~~~~~~~~~~ +git-p4.detectRenames:: + Detect renames. See linkgit:git-diff[1]. + +git-p4.detectCopies:: + Detect copies. See linkgit:git-diff[1]. + +git-p4.detectCopiesHarder:: + Detect copies harder. See linkgit:git-diff[1]. + +git-p4.preserveUser:: + On submit, re-author changes to reflect the git author, + regardless of who invokes 'git p4 submit'. + +git-p4.allowMissingP4Users:: + When 'preserveUser' is true, 'git p4' normally dies if it + cannot find an author in the p4 user map. This setting + submits the change regardless. + +git-p4.skipSubmitEdit:: + The submit process invokes the editor before each p4 change + is submitted. If this setting is true, though, the editing + step is skipped. + +git-p4.skipSubmitEditCheck:: + After editing the p4 change message, 'git p4' makes sure that + the description really was changed by looking at the file + modification time. This option disables that test. + +git-p4.allowSubmit:: + By default, any branch can be used as the source for a 'git p4 + submit' operation. This configuration variable, if set, permits only + the named branches to be used as submit sources. Branch names + must be the short names (no "refs/heads/"), and should be + separated by commas (","), with no spaces. + +git-p4.skipUserNameCheck:: + If the user running 'git p4 submit' does not exist in the p4 + user map, 'git p4' exits. This option can be used to force + submission regardless. + +git-p4.attemptRCSCleanup: + If enabled, 'git p4 submit' will attempt to cleanup RCS keywords + ($Header$, etc). These would otherwise cause merge conflicts and prevent + the submit going ahead. This option should be considered experimental at + present. + +IMPLEMENTATION DETAILS +---------------------- +* Changesets from p4 are imported using git fast-import. +* Cloning or syncing does not require a p4 client; file contents are + collected using 'p4 print'. +* Submitting requires a p4 client, which is not in the same location + as the git repository. Patches are applied, one at a time, to + this p4 client and submitted from there. +* Each commit imported by 'git p4' has a line at the end of the log + message indicating the p4 depot location and change number. This + line is used by later 'git p4 sync' operations to know which p4 + changes are new. diff --git a/Documentation/git-pull.txt b/Documentation/git-pull.txt index e1da468766..0f18ec891a 100644 --- a/Documentation/git-pull.txt +++ b/Documentation/git-pull.txt @@ -108,7 +108,7 @@ include::merge-options.txt[] fetched, the rebase uses that information to avoid rebasing non-local changes. + -See `branch.<name>.rebase` and `branch.autosetuprebase` in +See `pull.rebase`, `branch.<name>.rebase` and `branch.autosetuprebase` in linkgit:git-config[1] if you want to make `git pull` always use `{litdd}rebase` instead of merging. + diff --git a/Documentation/git-push.txt b/Documentation/git-push.txt index aede48877f..48760db337 100644 --- a/Documentation/git-push.txt +++ b/Documentation/git-push.txt @@ -10,7 +10,7 @@ SYNOPSIS -------- [verse] 'git push' [--all | --mirror | --tags] [-n | --dry-run] [--receive-pack=<git-receive-pack>] - [--repo=<repository>] [-f | --force] [-v | --verbose] [-u | --set-upstream] + [--repo=<repository>] [-f | --force] [--prune] [-v | --verbose] [-u | --set-upstream] [<repository> [<refspec>...]] DESCRIPTION @@ -71,6 +71,14 @@ nor in any Push line of the corresponding remotes file---see below). Instead of naming each ref to push, specifies that all refs under `refs/heads/` be pushed. +--prune:: + Remove remote branches that don't have a local counterpart. For example + a remote branch `tmp` will be removed if a local branch with the same + name doesn't exist any more. This also respects refspecs, e.g. + `git push --prune remote refs/heads/{asterisk}:refs/tmp/{asterisk}` would + make sure that remote `refs/tmp/foo` will be removed if `refs/heads/foo` + doesn't exist. + --mirror:: Instead of naming each ref to push, specifies that all refs under `refs/` (which includes but is not diff --git a/Documentation/git-read-tree.txt b/Documentation/git-read-tree.txt index a43e87448b..c4bde6509e 100644 --- a/Documentation/git-read-tree.txt +++ b/Documentation/git-read-tree.txt @@ -341,7 +341,7 @@ since you pulled from him: ---------------- $ git fetch git://.... linus -$ LT=`cat .git/FETCH_HEAD` +$ LT=`git rev-parse FETCH_HEAD` ---------------- Your work tree is still based on your HEAD ($JC), but you have diff --git a/Documentation/git-rebase.txt b/Documentation/git-rebase.txt index 504945c691..520aaa94fb 100644 --- a/Documentation/git-rebase.txt +++ b/Documentation/git-rebase.txt @@ -409,10 +409,13 @@ The interactive mode is meant for this type of workflow: where point 2. consists of several instances of -a. regular use +a) regular use + 1. finish something worthy of a commit 2. commit -b. independent fixup + +b) independent fixup + 1. realize that something does not work 2. fix that 3. commit it diff --git a/Documentation/git-remote.txt b/Documentation/git-remote.txt index 5a8c5061f3..d376d19ef7 100644 --- a/Documentation/git-remote.txt +++ b/Documentation/git-remote.txt @@ -14,7 +14,7 @@ SYNOPSIS 'git remote rename' <old> <new> 'git remote rm' <name> 'git remote set-head' <name> (-a | -d | <branch>) -'git remote set-branches' <name> [--add] <branch>... +'git remote set-branches' [--add] <name> <branch>... 'git remote set-url' [--push] <name> <newurl> [<oldurl>] 'git remote set-url --add' [--push] <name> <newurl> 'git remote set-url --delete' [--push] <name> <url> diff --git a/Documentation/git-repack.txt b/Documentation/git-repack.txt index 40af321153..4c1aff65e6 100644 --- a/Documentation/git-repack.txt +++ b/Documentation/git-repack.txt @@ -34,7 +34,7 @@ OPTIONS Especially useful when packing a repository that is used for private development. Use with '-d'. This will clean up the objects that `git prune` - leaves behind, but `git fsck --full` shows as + leaves behind, but `git fsck --full --dangling` shows as dangling. + Note that users fetching over dumb protocols will have to fetch the diff --git a/Documentation/git-rerere.txt b/Documentation/git-rerere.txt index a6253ba617..b43b7c8c0e 100644 --- a/Documentation/git-rerere.txt +++ b/Documentation/git-rerere.txt @@ -8,7 +8,7 @@ git-rerere - Reuse recorded resolution of conflicted merges SYNOPSIS -------- [verse] -'git rerere' ['clear'|'forget' <pathspec>|'diff'|'status'|'gc'] +'git rerere' ['clear'|'forget' <pathspec>|'diff'|'remaining'|'status'|'gc'] DESCRIPTION ----------- @@ -37,30 +37,35 @@ its working state. 'clear':: -This resets the metadata used by rerere if a merge resolution is to be +Reset the metadata used by rerere if a merge resolution is to be aborted. Calling 'git am [--skip|--abort]' or 'git rebase [--skip|--abort]' will automatically invoke this command. 'forget' <pathspec>:: -This resets the conflict resolutions which rerere has recorded for the current +Reset the conflict resolutions which rerere has recorded for the current conflict in <pathspec>. 'diff':: -This displays diffs for the current state of the resolution. It is +Display diffs for the current state of the resolution. It is useful for tracking what has changed while the user is resolving conflicts. Additional arguments are passed directly to the system 'diff' command installed in PATH. 'status':: -Like 'diff', but this only prints the filenames that will be tracked -for resolutions. +Print paths with conflicts whose merge resolution rerere will record. + +'remaining':: + +Print paths with conflicts that have not been autoresolved by rerere. +This includes paths whose resolutions cannot be tracked by rerere, +such as conflicting submodules. 'gc':: -This prunes records of conflicted merges that +Prune records of conflicted merges that occurred a long time ago. By default, unresolved conflicts older than 15 days and resolved conflicts older than 60 days are pruned. These defaults are controlled via the diff --git a/Documentation/git-reset.txt b/Documentation/git-reset.txt index b2832fc7eb..b674866e6d 100644 --- a/Documentation/git-reset.txt +++ b/Documentation/git-reset.txt @@ -9,8 +9,8 @@ SYNOPSIS -------- [verse] 'git reset' [-q] [<commit>] [--] <paths>... -'git reset' [--patch|-p] [<commit>] [--] [<paths>...] -'git reset' [--soft | --mixed | --hard | --merge | --keep] [-q] [<commit>] +'git reset' (--patch | -p) [<commit>] [--] [<paths>...] +'git reset' (--soft | --mixed | --hard | --merge | --keep) [-q] [<commit>] DESCRIPTION ----------- @@ -34,7 +34,7 @@ Alternatively, using linkgit:git-checkout[1] and specifying a commit, you can copy the contents of a path out of a commit to the index and to the working tree in one go. -'git reset' --patch|-p [<commit>] [--] [<paths>...]:: +'git reset' (--patch | -p) [<commit>] [--] [<paths>...]:: Interactively select hunks in the difference between the index and <commit> (defaults to HEAD). The chosen hunks are applied in reverse to the index. @@ -43,7 +43,7 @@ This means that `git reset -p` is the opposite of `git add -p`, i.e. you can use it to selectively reset hunks. See the ``Interactive Mode'' section of linkgit:git-add[1] to learn how to operate the `\--patch` mode. -'git reset' [--<mode>] [<commit>]:: +'git reset' --<mode> [<commit>]:: This form resets the current branch head to <commit> and possibly updates the index (resetting it to the tree of <commit>) and the working tree depending on <mode>, which diff --git a/Documentation/git-rev-parse.txt b/Documentation/git-rev-parse.txt index 42c9676eaa..8023dc086d 100644 --- a/Documentation/git-rev-parse.txt +++ b/Documentation/git-rev-parse.txt @@ -180,6 +180,10 @@ print a message to stderr and exit with nonzero status. <args>...:: Flags and parameters to be parsed. +--resolve-git-dir <path>:: + Check if <path> is a valid git-dir or a git-file pointing to a valid + git-dir. If <path> is a valid git-dir the resolved path to git-dir will + be printed. include::revisions.txt[] diff --git a/Documentation/git-revert.txt b/Documentation/git-revert.txt index b311d59c7c..b699a3458e 100644 --- a/Documentation/git-revert.txt +++ b/Documentation/git-revert.txt @@ -9,6 +9,9 @@ SYNOPSIS -------- [verse] 'git revert' [--edit | --no-edit] [-n] [-m parent-number] [-s] <commit>... +'git revert' --continue +'git revert' --quit +'git revert' --abort DESCRIPTION ----------- @@ -91,6 +94,10 @@ effect to your index in a row. Pass the merge strategy-specific option through to the merge strategy. See linkgit:git-merge[1] for details. +SEQUENCER SUBCOMMANDS +--------------------- +include::sequencer.txt[] + EXAMPLES -------- `git revert HEAD~3`:: diff --git a/Documentation/git-send-email.txt b/Documentation/git-send-email.txt index 327233c85b..324117072d 100644 --- a/Documentation/git-send-email.txt +++ b/Documentation/git-send-email.txt @@ -198,6 +198,10 @@ must be used for each option. if a username is not specified (with '--smtp-user' or 'sendemail.smtpuser'), then authentication is not attempted. +--smtp-debug=0|1:: + Enable (1) or disable (0) debug output. If enabled, SMTP + commands and replies will be printed. Useful to debug TLS + connection and authentication problems. Automating ~~~~~~~~~~ diff --git a/Documentation/git-sh-i18n--envsubst.txt b/Documentation/git-sh-i18n--envsubst.txt index 5c3ec327bb..2ffaf9392e 100644 --- a/Documentation/git-sh-i18n--envsubst.txt +++ b/Documentation/git-sh-i18n--envsubst.txt @@ -25,7 +25,7 @@ plumbing scripts and/or are writing new ones. 'git sh-i18n{litdd}envsubst' is Git's stripped-down copy of the GNU `envsubst(1)` program that comes with the GNU gettext package. It's used internally by linkgit:git-sh-i18n[1] to interpolate the variables -passed to the the `eval_gettext` function. +passed to the `eval_gettext` function. No promises are made about the interface, or that this program won't disappear without warning in the next version diff --git a/Documentation/git-sh-setup.txt b/Documentation/git-sh-setup.txt index a2f346ca71..5e5f1c8964 100644 --- a/Documentation/git-sh-setup.txt +++ b/Documentation/git-sh-setup.txt @@ -68,6 +68,16 @@ require_work_tree_exists:: cd_to_toplevel, which is impossible to do if there is no working tree. +require_clean_work_tree <action> [<hint>]:: + checks that the working tree and index associated with the + repository have no uncommitted changes to tracked files. + Otherwise it emits an error message of the form `Cannot + <action>: <reason>. <hint>`, and dies. Example: ++ +---------------- +require_clean_work_tree rebase "Please commit or stash them." +---------------- + get_author_ident_from_commit:: outputs code for use with eval to set the GIT_AUTHOR_NAME, GIT_AUTHOR_EMAIL and GIT_AUTHOR_DATE variables for a given commit. diff --git a/Documentation/git-show-ref.txt b/Documentation/git-show-ref.txt index 3c45895299..fcee0008a9 100644 --- a/Documentation/git-show-ref.txt +++ b/Documentation/git-show-ref.txt @@ -44,7 +44,7 @@ OPTIONS -d:: --dereference:: - Dereference tags into object IDs as well. They will be shown with "^{}" + Dereference tags into object IDs as well. They will be shown with "{caret}{}" appended. -s:: @@ -73,9 +73,9 @@ OPTIONS --exclude-existing[=<pattern>]:: Make 'git show-ref' act as a filter that reads refs from stdin of the - form "^(?:<anything>\s)?<refname>(?:{backslash}{caret}\{\})?$" + form "`{caret}(?:<anything>\s)?<refname>(?:{backslash}{caret}{})?$`" and performs the following actions on each: - (1) strip "^{}" at the end of line if any; + (1) strip "{caret}{}" at the end of line if any; (2) ignore if pattern is provided and does not head-match refname; (3) warn if refname is not a well-formed refname and skip; (4) ignore if refname is a ref that exists in the local repository; diff --git a/Documentation/git-stripspace.txt b/Documentation/git-stripspace.txt index b78f031cd4..a80d94650d 100644 --- a/Documentation/git-stripspace.txt +++ b/Documentation/git-stripspace.txt @@ -3,26 +3,83 @@ git-stripspace(1) NAME ---- -git-stripspace - Filter out empty lines +git-stripspace - Remove unnecessary whitespace SYNOPSIS -------- [verse] -'git stripspace' [-s | --strip-comments] < <stream> +'git stripspace' [-s | --strip-comments] < input DESCRIPTION ----------- -Remove multiple empty lines, and empty lines at beginning and end. + +Clean the input in the manner used by 'git' for text such as commit +messages, notes, tags and branch descriptions. + +With no arguments, this will: + +- remove trailing whitespace from all lines +- collapse multiple consecutive empty lines into one empty line +- remove empty lines from the beginning and end of the input +- add a missing '\n' to the last line if necessary. + +In the case where the input consists entirely of whitespace characters, no +output will be produced. + +*NOTE*: This is intended for cleaning metadata, prefer the `--whitespace=fix` +mode of linkgit:git-apply[1] for correcting whitespace of patches or files in +the repository. OPTIONS ------- -s:: --strip-comments:: - In addition to empty lines, also strip lines starting with '#'. + Skip and remove all lines starting with '#'. + +EXAMPLES +-------- + +Given the following noisy input with '$' indicating the end of a line: -<stream>:: - Byte stream to act on. +-------- +|A brief introduction $ +| $ +|$ +|A new paragraph$ +|# with a commented-out line $ +|explaining lots of stuff.$ +|$ +|# An old paragraph, also commented-out. $ +| $ +|The end.$ +| $ +--------- + +Use 'git stripspace' with no arguments to obtain: + +-------- +|A brief introduction$ +|$ +|A new paragraph$ +|# with a commented-out line$ +|explaining lots of stuff.$ +|$ +|# An old paragraph, also commented-out.$ +|$ +|The end.$ +--------- + +Use 'git stripspace --strip-comments' to obtain: + +-------- +|A brief introduction$ +|$ +|A new paragraph$ +|explaining lots of stuff.$ +|$ +|The end.$ +--------- GIT --- diff --git a/Documentation/git-submodule.txt b/Documentation/git-submodule.txt index cd9c167e0a..c243ee552b 100644 --- a/Documentation/git-submodule.txt +++ b/Documentation/git-submodule.txt @@ -125,6 +125,8 @@ too (and can also report changes to a submodule's work tree). init:: Initialize the submodules, i.e. register each submodule name and url found in .gitmodules into .git/config. + It will also copy the value of `submodule.$name.update` into + .git/config. The key used in .git/config is `submodule.$name.url`. This command does not alter existing information in .git/config. You can then customize the submodule clone URLs in .git/config @@ -138,7 +140,7 @@ update:: checkout the commit specified in the index of the containing repository. This will make the submodules HEAD be detached unless `--rebase` or `--merge` is specified or the key `submodule.$name.update` is set to - `rebase` or `merge`. + `rebase`, `merge` or `none`. + If the submodule is not yet initialized, and you just want to use the setting as stored in .gitmodules, you can automatically initialize the @@ -146,6 +148,10 @@ submodule with the `--init` option. + If `--recursive` is specified, this command will recurse into the registered submodules, and update any nested submodules within. ++ +If the configuration key `submodule.$name.update` is set to `none` the +submodule with name `$name` will not be updated by default. This can be +overriden by adding `--checkout` to the command. summary:: Show commit summary between the given commit (defaults to HEAD) and @@ -184,7 +190,7 @@ commit for each submodule. sync:: Synchronizes submodules' remote URL configuration setting to the value specified in .gitmodules. It will only affect those - submodules which already have an url entry in .git/config (that is the + submodules which already have a URL entry in .git/config (that is the case when they are initialized or freshly added). This is useful when submodule URLs change upstream and you need to update your local repositories accordingly. diff --git a/Documentation/git-svn.txt b/Documentation/git-svn.txt index f977e8780b..34ee785064 100644 --- a/Documentation/git-svn.txt +++ b/Documentation/git-svn.txt @@ -234,6 +234,14 @@ svn:mergeinfo property in the SVN repository when possible. Currently, this can only be done when dcommitting non-fast-forward merges where all parents but the first have already been pushed into SVN. +--interactive;; + Ask the user to confirm that a patch set should actually be sent to SVN. + For each patch, one may answer "yes" (accept this patch), "no" (discard this + patch), "all" (accept all patches), or "quit". + + + 'git svn dcommit' returns immediately if answer if "no" or "quit", without + commiting anything to SVN. + 'branch':: Create a branch in the SVN repository. diff --git a/Documentation/git-symbolic-ref.txt b/Documentation/git-symbolic-ref.txt index a45d4c4f29..981d3a8fc1 100644 --- a/Documentation/git-symbolic-ref.txt +++ b/Documentation/git-symbolic-ref.txt @@ -8,7 +8,8 @@ git-symbolic-ref - Read and modify symbolic refs SYNOPSIS -------- [verse] -'git symbolic-ref' [-q] [-m <reason>] <name> [<ref>] +'git symbolic-ref' [-m <reason>] <name> <ref> +'git symbolic-ref' [-q] [--short] <name> DESCRIPTION ----------- @@ -33,6 +34,10 @@ OPTIONS symbolic ref but a detached HEAD; instead exit with non-zero status silently. +--short:: + When showing the value of <name> as a symbolic ref, try to shorten the + value, e.g. from `refs/heads/master` to `master`. + -m:: Update the reflog for <name> with <reason>. This is valid only when creating or updating a symbolic ref. diff --git a/Documentation/git-tag.txt b/Documentation/git-tag.txt index fb1c0ac694..8d32b9a814 100644 --- a/Documentation/git-tag.txt +++ b/Documentation/git-tag.txt @@ -12,7 +12,8 @@ SYNOPSIS 'git tag' [-a | -s | -u <key-id>] [-f] [-m <msg> | -F <file>] <tagname> [<commit> | <object>] 'git tag' -d <tagname>... -'git tag' [-n[<num>]] -l [--contains <commit>] [<pattern>...] +'git tag' [-n[<num>]] -l [--contains <commit>] [--points-at <object>] + [<pattern>...] 'git tag' -v <tagname>... DESCRIPTION @@ -38,27 +39,34 @@ created (i.e. a lightweight tag). A GnuPG signed tag object will be created when `-s` or `-u <key-id>` is used. When `-u <key-id>` is not used, the committer identity for the current user is used to find the -GnuPG key for signing. +GnuPG key for signing. The configuration variable `gpg.program` +is used to specify custom GnuPG binary. + OPTIONS ------- -a:: +--annotate:: Make an unsigned, annotated tag object -s:: - Make a GPG-signed tag, using the default e-mail address's key +--sign:: + Make a GPG-signed tag, using the default e-mail address's key. -u <key-id>:: - Make a GPG-signed tag, using the given key +--local-user=<key-id>:: + Make a GPG-signed tag, using the given key. -f:: --force:: Replace an existing tag with the given name (instead of failing) -d:: +--delete:: Delete existing tags with the given names. -v:: +--verify:: Verify the gpg signature of the given tag names. -n<num>:: @@ -69,6 +77,7 @@ OPTIONS If the tag is not annotated, the commit message is displayed instead. -l <pattern>:: +--list <pattern>:: List tags with names that match the given pattern (or all if no pattern is given). Running "git tag" without arguments also lists all tags. The pattern is a shell wildcard (i.e., matched @@ -78,7 +87,11 @@ OPTIONS --contains <commit>:: Only list tags which contain the specified commit. +--points-at <object>:: + Only list tags of the given object. + -m <msg>:: +--message=<msg>:: Use the given tag message (instead of prompting). If multiple `-m` options are given, their values are concatenated as separate paragraphs. @@ -86,11 +99,19 @@ OPTIONS is given. -F <file>:: +--file=<file>:: Take the tag message from the given file. Use '-' to read the message from the standard input. Implies `-a` if none of `-a`, `-s`, or `-u <key-id>` is given. +--cleanup=<mode>:: + This option sets how the tag message is cleaned up. + The '<mode>' can be one of 'verbatim', 'whitespace' and 'strip'. The + 'strip' mode is default. The 'verbatim' mode does not change message at + all, 'whitespace' removes just leading/trailing whitespace lines and + 'strip' removes both whitespace and commentary. + <tagname>:: The name of the tag to create, delete, or describe. The new tag name must pass all checks defined by diff --git a/Documentation/git.txt b/Documentation/git.txt index 6803e1309f..c2b523c589 100644 --- a/Documentation/git.txt +++ b/Documentation/git.txt @@ -9,11 +9,11 @@ git - the stupid content tracker SYNOPSIS -------- [verse] -'git' [--version] [--exec-path[=<path>]] [--html-path] [--man-path] [--info-path] +'git' [--version] [--help] [-c <name>=<value>] + [--exec-path[=<path>]] [--html-path] [--man-path] [--info-path] [-p|--paginate|--no-pager] [--no-replace-objects] [--bare] [--git-dir=<path>] [--work-tree=<path>] [--namespace=<name>] - [-c <name>=<value>] - [--help] <command> [<args>] + <command> [<args>] DESCRIPTION ----------- @@ -44,9 +44,39 @@ unreleased) version of git, that is available from 'master' branch of the `git.git` repository. Documentation for older releases are available here: -* link:v1.7.7.5/git.html[documentation for release 1.7.7.5] +* link:v1.7.10/git.html[documentation for release 1.7.10] * release notes for + link:RelNotes/1.7.10.txt[1.7.10]. + +* link:v1.7.9.7/git.html[documentation for release 1.7.9.7] + +* release notes for + link:RelNotes/1.7.9.7.txt[1.7.9.7], + link:RelNotes/1.7.9.6.txt[1.7.9.6], + link:RelNotes/1.7.9.5.txt[1.7.9.5], + link:RelNotes/1.7.9.4.txt[1.7.9.4], + link:RelNotes/1.7.9.3.txt[1.7.9.3], + link:RelNotes/1.7.9.2.txt[1.7.9.2], + link:RelNotes/1.7.9.1.txt[1.7.9.1], + link:RelNotes/1.7.9.txt[1.7.9]. + +* link:v1.7.8.6/git.html[documentation for release 1.7.8.6] + +* release notes for + link:RelNotes/1.7.8.6.txt[1.7.8.6], + link:RelNotes/1.7.8.5.txt[1.7.8.5], + link:RelNotes/1.7.8.4.txt[1.7.8.4], + link:RelNotes/1.7.8.3.txt[1.7.8.3], + link:RelNotes/1.7.8.2.txt[1.7.8.2], + link:RelNotes/1.7.8.1.txt[1.7.8.1], + link:RelNotes/1.7.8.txt[1.7.8]. + +* link:v1.7.7.7/git.html[documentation for release 1.7.7.7] + +* release notes for + link:RelNotes/1.7.7.7.txt[1.7.7.7], + link:RelNotes/1.7.7.6.txt[1.7.7.6], link:RelNotes/1.7.7.5.txt[1.7.7.5], link:RelNotes/1.7.7.4.txt[1.7.7.4], link:RelNotes/1.7.7.3.txt[1.7.7.3], @@ -692,6 +722,12 @@ other a pager. See also the `core.pager` option in linkgit:git-config[1]. +'GIT_EDITOR':: + This environment variable overrides `$EDITOR` and `$VISUAL`. + It is used by several git comands when, on interactive mode, + an editor is to be launched. See also linkgit:git-var[1] + and the `core.editor` option in linkgit:git-config[1]. + 'GIT_SSH':: If this environment variable is set then 'git fetch' and 'git push' will use this command instead diff --git a/Documentation/gitattributes.txt b/Documentation/gitattributes.txt index 25e46aeb7a..80120ea14f 100644 --- a/Documentation/gitattributes.txt +++ b/Documentation/gitattributes.txt @@ -294,16 +294,27 @@ output is used to update the worktree file. Similarly, the `clean` command is used to convert the contents of worktree file upon checkin. -A missing filter driver definition in the config is not an error -but makes the filter a no-op passthru. - -The content filtering is done to massage the content into a -shape that is more convenient for the platform, filesystem, and -the user to use. The key phrase here is "more convenient" and not -"turning something unusable into usable". In other words, the -intent is that if someone unsets the filter driver definition, -or does not have the appropriate filter program, the project -should still be usable. +One use of the content filtering is to massage the content into a shape +that is more convenient for the platform, filesystem, and the user to use. +For this mode of operation, the key phrase here is "more convenient" and +not "turning something unusable into usable". In other words, the intent +is that if someone unsets the filter driver definition, or does not have +the appropriate filter program, the project should still be usable. + +Another use of the content filtering is to store the content that cannot +be directly used in the repository (e.g. a UUID that refers to the true +content stored outside git, or an encrypted content) and turn it into a +usable form upon checkout (e.g. download the external content, or decrypt +the encrypted content). + +These two filters behave differently, and by default, a filter is taken as +the former, massaging the contents into more convenient shape. A missing +filter driver definition in the config, or a filter driver that exits with +a non-zero status, is not an error but makes the filter a no-op passthru. + +You can declare that a filter turns a content that by itself is unusable +into a usable content by setting the filter.<driver>.required configuration +variable to `true`. For example, in .gitattributes, you would assign the `filter` attribute for paths. @@ -335,6 +346,16 @@ input that is already correctly indented. In this case, the lack of a smudge filter means that the clean filter _must_ accept its own output without modifying it. +If a filter _must_ succeed in order to make the stored contents usable, +you can declare that the filter is `required`, in the configuration: + +------------------------ +[filter "crypt"] + clean = openssl enc ... + smudge = openssl enc -d ... + required +------------------------ + Sequence "%f" on the filter command line is replaced with the name of the file the filter is working on. A filter might use this in keyword substitution. For example: @@ -500,6 +521,8 @@ patterns are available: - `java` suitable for source code in the Java language. +- `matlab` suitable for source code in the MATLAB language. + - `objc` suitable for source code in the Objective-C language. - `pascal` suitable for source code in the Pascal/Delphi language. diff --git a/Documentation/gitcore-tutorial.txt b/Documentation/gitcore-tutorial.txt index c27d086f68..fb0d5692a4 100644 --- a/Documentation/gitcore-tutorial.txt +++ b/Documentation/gitcore-tutorial.txt @@ -1004,7 +1004,7 @@ Updating from ae3a2da... to a80b4aa.... Fast-forward (no commit created; -m option ignored) example | 1 + hello | 1 + - 2 files changed, 2 insertions(+), 0 deletions(-) + 2 files changed, 2 insertions(+) ---------------- Because your branch did not contain anything more than what had diff --git a/Documentation/gitcredentials.txt b/Documentation/gitcredentials.txt new file mode 100644 index 0000000000..066f825f2e --- /dev/null +++ b/Documentation/gitcredentials.txt @@ -0,0 +1,183 @@ +gitcredentials(7) +================= + +NAME +---- +gitcredentials - providing usernames and passwords to git + +SYNOPSIS +-------- +------------------ +git config credential.https://example.com.username myusername +git config credential.helper "$helper $options" +------------------ + +DESCRIPTION +----------- + +Git will sometimes need credentials from the user in order to perform +operations; for example, it may need to ask for a username and password +in order to access a remote repository over HTTP. This manual describes +the mechanisms git uses to request these credentials, as well as some +features to avoid inputting these credentials repeatedly. + +REQUESTING CREDENTIALS +---------------------- + +Without any credential helpers defined, git will try the following +strategies to ask the user for usernames and passwords: + +1. If the `GIT_ASKPASS` environment variable is set, the program + specified by the variable is invoked. A suitable prompt is provided + to the program on the command line, and the user's input is read + from its standard output. + +2. Otherwise, if the `core.askpass` configuration variable is set, its + value is used as above. + +3. Otherwise, if the `SSH_ASKPASS` environment variable is set, its + value is used as above. + +4. Otherwise, the user is prompted on the terminal. + +AVOIDING REPETITION +------------------- + +It can be cumbersome to input the same credentials over and over. Git +provides two methods to reduce this annoyance: + +1. Static configuration of usernames for a given authentication context. + +2. Credential helpers to cache or store passwords, or to interact with + a system password wallet or keychain. + +The first is simple and appropriate if you do not have secure storage available +for a password. It is generally configured by adding this to your config: + +--------------------------------------- +[credential "https://example.com"] + username = me +--------------------------------------- + +Credential helpers, on the other hand, are external programs from which git can +request both usernames and passwords; they typically interface with secure +storage provided by the OS or other programs. + +To use a helper, you must first select one to use. Git currently +includes the following helpers: + +cache:: + + Cache credentials in memory for a short period of time. See + linkgit:git-credential-cache[1] for details. + +store:: + + Store credentials indefinitely on disk. See + linkgit:git-credential-store[1] for details. + +You may also have third-party helpers installed; search for +`credential-*` in the output of `git help -a`, and consult the +documentation of individual helpers. Once you have selected a helper, +you can tell git to use it by putting its name into the +credential.helper variable. + +1. Find a helper. ++ +------------------------------------------- +$ git help -a | grep credential- +credential-foo +------------------------------------------- + +2. Read its description. ++ +------------------------------------------- +$ git help credential-foo +------------------------------------------- + +3. Tell git to use it. ++ +------------------------------------------- +$ git config --global credential.helper foo +------------------------------------------- + +If there are multiple instances of the `credential.helper` configuration +variable, each helper will be tried in turn, and may provide a username, +password, or nothing. Once git has acquired both a username and a +password, no more helpers will be tried. + + +CREDENTIAL CONTEXTS +------------------- + +Git considers each credential to have a context defined by a URL. This context +is used to look up context-specific configuration, and is passed to any +helpers, which may use it as an index into secure storage. + +For instance, imagine we are accessing `https://example.com/foo.git`. When git +looks into a config file to see if a section matches this context, it will +consider the two a match if the context is a more-specific subset of the +pattern in the config file. For example, if you have this in your config file: + +-------------------------------------- +[credential "https://example.com"] + username = foo +-------------------------------------- + +then we will match: both protocols are the same, both hosts are the same, and +the "pattern" URL does not care about the path component at all. However, this +context would not match: + +-------------------------------------- +[credential "https://kernel.org"] + username = foo +-------------------------------------- + +because the hostnames differ. Nor would it match `foo.example.com`; git +compares hostnames exactly, without considering whether two hosts are part of +the same domain. Likewise, a config entry for `http://example.com` would not +match: git compares the protocols exactly. + + +CONFIGURATION OPTIONS +--------------------- + +Options for a credential context can be configured either in +`credential.\*` (which applies to all credentials), or +`credential.<url>.\*`, where <url> matches the context as described +above. + +The following options are available in either location: + +helper:: + + The name of an external credential helper, and any associated options. + If the helper name is not an absolute path, then the string `git + credential-` is prepended. The resulting string is executed by the + shell (so, for example, setting this to `foo --option=bar` will execute + `git credential-foo --option=bar` via the shell. See the manual of + specific helpers for examples of their use. + +username:: + + A default username, if one is not provided in the URL. + +useHttpPath:: + + By default, git does not consider the "path" component of an http URL + to be worth matching via external helpers. This means that a credential + stored for `https://example.com/foo.git` will also be used for + `https://example.com/bar.git`. If you do want to distinguish these + cases, set this option to `true`. + + +CUSTOM HELPERS +-------------- + +You can write your own custom helpers to interface with any system in +which you keep credentials. See the documentation for git's +link:technical/api-credentials.html[credentials API] for details. + +GIT +--- +Part of the linkgit:git[1] suite diff --git a/Documentation/gitmodules.txt b/Documentation/gitmodules.txt index 4040941e55..4e1fd52e7d 100644 --- a/Documentation/gitmodules.txt +++ b/Documentation/gitmodules.txt @@ -28,7 +28,7 @@ submodule.<name>.path:: be unique within the .gitmodules file. submodule.<name>.url:: - Defines an url from where the submodule repository can be cloned. + Defines a URL from which the submodule repository can be cloned. This may be either an absolute URL ready to be passed to linkgit:git-clone[1] or (if it begins with ./ or ../) a location relative to the superproject's origin repository. @@ -84,7 +84,7 @@ Consider the following .gitmodules file: This defines two submodules, `libfoo` and `libbar`. These are expected to be checked out in the paths 'include/foo' and 'include/bar', and for both -submodules an url is specified which can be used for cloning the submodules. +submodules a URL is specified which can be used for cloning the submodules. SEE ALSO -------- diff --git a/Documentation/gittutorial-2.txt b/Documentation/gittutorial-2.txt index f1e4422acc..e00a4d2170 100644 --- a/Documentation/gittutorial-2.txt +++ b/Documentation/gittutorial-2.txt @@ -34,12 +34,12 @@ $ echo 'hello world' > file.txt $ git add . $ git commit -a -m "initial commit" [master (root-commit) 54196cc] initial commit - 1 files changed, 1 insertions(+), 0 deletions(-) + 1 file changed, 1 insertion(+) create mode 100644 file.txt $ echo 'hello world!' >file.txt $ git commit -a -m "add emphasis" [master c4d59f3] add emphasis - 1 files changed, 1 insertions(+), 1 deletions(-) + 1 file changed, 1 insertion(+), 1 deletion(-) ------------------------------------------------ What are the 7 digits of hex that git responded to the commit with? diff --git a/Documentation/gitweb.conf.txt b/Documentation/gitweb.conf.txt new file mode 100644 index 0000000000..7aba497b74 --- /dev/null +++ b/Documentation/gitweb.conf.txt @@ -0,0 +1,889 @@ +gitweb.conf(5) +============== + +NAME +---- +gitweb.conf - Gitweb (git web interface) configuration file + +SYNOPSIS +-------- +/etc/gitweb.conf, /etc/gitweb-common.conf, $GITWEBDIR/gitweb_config.perl + +DESCRIPTION +----------- + +The gitweb CGI script for viewing Git repositories over the web uses a +perl script fragment as its configuration file. You can set variables +using "`our $variable = value`"; text from a "#" character until the +end of a line is ignored. See *perlsyn*(1) for details. + +An example: + + # gitweb configuration file for http://git.example.org + # + our $projectroot = "/srv/git"; # FHS recommendation + our $site_name = 'Example.org >> Repos'; + + +The configuration file is used to override the default settings that +were built into gitweb at the time the 'gitweb.cgi' script was generated. + +While one could just alter the configuration settings in the gitweb +CGI itself, those changes would be lost upon upgrade. Configuration +settings might also be placed into a file in the same directory as the +CGI script with the default name 'gitweb_config.perl' -- allowing +one to have multiple gitweb instances with different configurations by +the use of symlinks. + +Note that some configuration can be controlled on per-repository rather than +gitweb-wide basis: see "Per-repository gitweb configuration" subsection on +linkgit:gitweb[1] manpage. + + +DISCUSSION +---------- +Gitweb reads configuration data from the following sources in the +following order: + + * built-in values (some set during build stage), + + * common system-wide configuration file (defaults to + '/etc/gitweb-common.conf'), + + * either per-instance configuration file (defaults to 'gitweb_config.perl' + in the same directory as the installed gitweb), or if it does not exists + then fallback system-wide configuration file (defaults to '/etc/gitweb.conf'). + +Values obtained in later configuration files override values obtained earlier +in the above sequence. + +Locations of the common system-wide configuration file, the fallback +system-wide configuration file and the per-instance configuration file +are defined at compile time using build-time Makefile configuration +variables, respectively `GITWEB_CONFIG_COMMON`, `GITWEB_CONFIG_SYSTEM` +and `GITWEB_CONFIG`. + +You can also override locations of gitweb configuration files during +runtime by setting the following environment variables: +`GITWEB_CONFIG_COMMON`, `GITWEB_CONFIG_SYSTEM` and `GITWEB_CONFIG` +to a non-empty value. + + +The syntax of the configuration files is that of Perl, since these files are +handled by sourcing them as fragments of Perl code (the language that +gitweb itself is written in). Variables are typically set using the +`our` qualifier (as in "`our $variable = <value>;`") to avoid syntax +errors if a new version of gitweb no longer uses a variable and therefore +stops declaring it. + +You can include other configuration file using read_config_file() +subroutine. For example, one might want to put gitweb configuration +related to access control for viewing repositories via Gitolite (one +of git repository management tools) in a separate file, e.g. in +'/etc/gitweb-gitolite.conf'. To include it, put + +-------------------------------------------------- +read_config_file("/etc/gitweb-gitolite.conf"); +-------------------------------------------------- + +somewhere in gitweb configuration file used, e.g. in per-installation +gitweb configuration file. Note that read_config_file() checks itself +that the file it reads exists, and does nothing if it is not found. +It also handles errors in included file. + + +The default configuration with no configuration file at all may work +perfectly well for some installations. Still, a configuration file is +useful for customizing or tweaking the behavior of gitweb in many ways, and +some optional features will not be present unless explicitly enabled using +the configurable `%features` variable (see also "Configuring gitweb +features" section below). + + +CONFIGURATION VARIABLES +----------------------- +Some configuration variables have their default values (embedded in the CGI +script) set during building gitweb -- if that is the case, this fact is put +in their description. See gitweb's 'INSTALL' file for instructions on building +and installing gitweb. + + +Location of repositories +~~~~~~~~~~~~~~~~~~~~~~~~ +The configuration variables described below control how gitweb finds +git repositories, and how repositories are displayed and accessed. + +See also "Repositories" and later subsections in linkgit:gitweb[1] manpage. + +$projectroot:: + Absolute filesystem path which will be prepended to project path; + the path to repository is `$projectroot/$project`. Set to + `$GITWEB_PROJECTROOT` during installation. This variable has to be + set correctly for gitweb to find repositories. ++ +For example, if `$projectroot` is set to "/srv/git" by putting the following +in gitweb config file: ++ +---------------------------------------------------------------------------- +our $projectroot = "/srv/git"; +---------------------------------------------------------------------------- ++ +then ++ +------------------------------------------------ +http://git.example.com/gitweb.cgi?p=foo/bar.git +------------------------------------------------ ++ +and its path_info based equivalent ++ +------------------------------------------------ +http://git.example.com/gitweb.cgi/foo/bar.git +------------------------------------------------ ++ +will map to the path '/srv/git/foo/bar.git' on the filesystem. + +$projects_list:: + Name of a plain text file listing projects, or a name of directory + to be scanned for projects. ++ +Project list files should list one project per line, with each line +having the following format ++ +----------------------------------------------------------------------------- +<URI-encoded filesystem path to repository> SP <URI-encoded repository owner> +----------------------------------------------------------------------------- ++ +The default value of this variable is determined by the `GITWEB_LIST` +makefile variable at installation time. If this variable is empty, gitweb +will fall back to scanning the `$projectroot` directory for repositories. + +$project_maxdepth:: + If `$projects_list` variable is unset, gitweb will recursively + scan filesystem for git repositories. The `$project_maxdepth` + is used to limit traversing depth, relative to `$projectroot` + (starting point); it means that directories which are further + from `$projectroot` than `$project_maxdepth` will be skipped. ++ +It is purely performance optimization, originally intended for MacOS X, +where recursive directory traversal is slow. Gitweb follows symbolic +links, but it detects cycles, ignoring any duplicate files and directories. ++ +The default value of this variable is determined by the build-time +configuration variable `GITWEB_PROJECT_MAXDEPTH`, which defaults to +2007. + +$export_ok:: + Show repository only if this file exists (in repository). Only + effective if this variable evaluates to true. Can be set when + building gitweb by setting `GITWEB_EXPORT_OK`. This path is + relative to `GIT_DIR`. git-daemon[1] uses 'git-daemon-export-ok', + unless started with `--export-all`. By default this variable is + not set, which means that this feature is turned off. + +$export_auth_hook:: + Function used to determine which repositories should be shown. + This subroutine should take one parameter, the full path to + a project, and if it returns true, that project will be included + in the projects list and can be accessed through gitweb as long + as it fulfills the other requirements described by $export_ok, + $projects_list, and $projects_maxdepth. Example: ++ +---------------------------------------------------------------------------- +our $export_auth_hook = sub { return -e "$_[0]/git-daemon-export-ok"; }; +---------------------------------------------------------------------------- ++ +though the above might be done by using `$export_ok` instead ++ +---------------------------------------------------------------------------- +our $export_ok = "git-daemon-export-ok"; +---------------------------------------------------------------------------- ++ +If not set (default), it means that this feature is disabled. ++ +See also more involved example in "Controlling access to git repositories" +subsection on linkgit:gitweb[1] manpage. + +$strict_export:: + Only allow viewing of repositories also shown on the overview page. + This for example makes `$gitweb_export_ok` file decide if repository is + available and not only if it is shown. If `$gitweb_list` points to + file with list of project, only those repositories listed would be + available for gitweb. Can be set during building gitweb via + `GITWEB_STRICT_EXPORT`. By default this variable is not set, which + means that you can directly access those repositories that are hidden + from projects list page (e.g. the are not listed in the $projects_list + file). + + +Finding files +~~~~~~~~~~~~~ +The following configuration variables tell gitweb where to find files. +The values of these variables are paths on the filesystem. + +$GIT:: + Core git executable to use. By default set to `$GIT_BINDIR/git`, which + in turn is by default set to `$(bindir)/git`. If you use git installed + from a binary package, you should usually set this to "/usr/bin/git". + This can just be "git" if your web server has a sensible PATH; from + security point of view it is better to use absolute path to git binary. + If you have multiple git versions installed it can be used to choose + which one to use. Must be (correctly) set for gitweb to be able to + work. + +$mimetypes_file:: + File to use for (filename extension based) guessing of MIME types before + trying '/etc/mime.types'. *NOTE* that this path, if relative, is taken + as relative to the current git repository, not to CGI script. If unset, + only '/etc/mime.types' is used (if present on filesystem). If no mimetypes + file is found, mimetype guessing based on extension of file is disabled. + Unset by default. + +$highlight_bin:: + Path to the highlight executable to use (it must be the one from + http://www.andre-simon.de[] due to assumptions about parameters and output). + By default set to 'highlight'; set it to full path to highlight + executable if it is not installed on your web server's PATH. + Note that 'highlight' feature must be set for gitweb to actually + use syntax hightlighting. ++ +*NOTE*: if you want to add support for new file type (supported by +"highlight" but not used by gitweb), you need to modify `%highlight_ext` +or `%highlight_basename`, depending on whether you detect type of file +based on extension (for example "sh") or on its basename (for example +"Makefile"). The keys of these hashes are extension and basename, +respectively, and value for given key is name of syntax to be passed via +`--syntax <syntax>` to highlighter. ++ +For example if repositories you are hosting use "phtml" extension for +PHP files, and you want to have correct syntax-highlighting for those +files, you can add the following to gitweb configuration: ++ +--------------------------------------------------------- +our %highlight_ext; +$highlight_ext{'phtml'} = 'php'; +--------------------------------------------------------- + + +Links and their targets +~~~~~~~~~~~~~~~~~~~~~~~ +The configuration variables described below configure some of gitweb links: +their target and their look (text or image), and where to find page +prerequisites (stylesheet, favicon, images, scripts). Usually they are left +at their default values, with the possible exception of `@stylesheets` +variable. + +@stylesheets:: + List of URIs of stylesheets (relative to the base URI of a page). You + might specify more than one stylesheet, for example to use "gitweb.css" + as base with site specific modifications in a separate stylesheet + to make it easier to upgrade gitweb. For example, you can add + a `site` stylesheet by putting ++ +---------------------------------------------------------------------------- +push @stylesheets, "gitweb-site.css"; +---------------------------------------------------------------------------- ++ +in the gitweb config file. Those values that are relative paths are +relative to base URI of gitweb. ++ +This list should contain the URI of gitweb's standard stylesheet. The default +URI of gitweb stylesheet can be set at build time using the `GITWEB_CSS` +makefile variable. Its default value is 'static/gitweb.css' +(or 'static/gitweb.min.css' if the `CSSMIN` variable is defined, +i.e. if CSS minifier is used during build). ++ +*Note*: there is also a legacy `$stylesheet` configuration variable, which was +used by older gitweb. If `$stylesheet` variable is defined, only CSS stylesheet +given by this variable is used by gitweb. + +$logo:: + Points to the location where you put 'git-logo.png' on your web + server, or to be more the generic URI of logo, 72x27 size). This image + is displayed in the top right corner of each gitweb page and used as + a logo for the Atom feed. Relative to the base URI of gitweb (as a path). + Can be adjusted when building gitweb using `GITWEB_LOGO` variable + By default set to 'static/git-logo.png'. + +$favicon:: + Points to the location where you put 'git-favicon.png' on your web + server, or to be more the generic URI of favicon, which will be served + as "image/png" type. Web browsers that support favicons (website icons) + may display them in the browser's URL bar and next to the site name in + bookmarks. Relative to the base URI of gitweb. Can be adjusted at + build time using `GITWEB_FAVICON` variable. + By default set to 'static/git-favicon.png'. + +$javascript:: + Points to the location where you put 'gitweb.js' on your web server, + or to be more generic the URI of JavaScript code used by gitweb. + Relative to the base URI of gitweb. Can be set at build time using + the `GITWEB_JS` build-time configuration variable. ++ +The default value is either 'static/gitweb.js', or 'static/gitweb.min.js' if +the `JSMIN` build variable was defined, i.e. if JavaScript minifier was used +at build time. *Note* that this single file is generated from multiple +individual JavaScript "modules". + +$home_link:: + Target of the home link on the top of all pages (the first part of view + "breadcrumbs"). By default it is set to the absolute URI of a current page + (to the value of `$my_uri` variable, or to "/" if `$my_uri` is undefined + or is an empty string). + +$home_link_str:: + Label for the "home link" at the top of all pages, leading to `$home_link` + (usually the main gitweb page, which contains the projects list). It is + used as the first component of gitweb's "breadcrumb trail": + `<home link> / <project> / <action>`. Can be set at build time using + the `GITWEB_HOME_LINK_STR` variable. By default it is set to "projects", + as this link leads to the list of projects. Other popular choice it to + set it to the name of site. + +$logo_url:: +$logo_label:: + URI and label (title) for the Git logo link (or your site logo, + if you chose to use different logo image). By default, these both + refer to git homepage, http://git-scm.com[]; in the past, they pointed + to git documentation at http://www.kernel.org[]. + + +Changing gitweb's look +~~~~~~~~~~~~~~~~~~~~~~ +You can adjust how pages generated by gitweb look using the variables described +below. You can change the site name, add common headers and footers for all +pages, and add a description of this gitweb installation on its main page +(which is the projects list page), etc. + +$site_name:: + Name of your site or organization, to appear in page titles. Set it + to something descriptive for clearer bookmarks etc. If this variable + is not set or is, then gitweb uses the value of the `SERVER_NAME` + CGI environment variable, setting site name to "$SERVER_NAME Git", + or "Untitled Git" if this variable is not set (e.g. if running gitweb + as standalone script). ++ +Can be set using the `GITWEB_SITENAME` at build time. Unset by default. + +$site_html_head_string:: + HTML snippet to be included in the <head> section of each page. + Can be set using `GITWEB_SITE_HTML_HEAD_STRING` at build time. + No default value. + +$site_header:: + Name of a file with HTML to be included at the top of each page. + Relative to the directory containing the 'gitweb.cgi' script. + Can be set using `GITWEB_SITE_HEADER` at build time. No default + value. + +$site_footer:: + Name of a file with HTML to be included at the bottom of each page. + Relative to the directory containing the 'gitweb.cgi' script. + Can be set using `GITWEB_SITE_FOOTER` at build time. No default + value. + +$home_text:: + Name of a HTML file which, if it exists, is included on the + gitweb projects overview page ("projects_list" view). Relative to + the directory containing the gitweb.cgi script. Default value + can be adjusted during build time using `GITWEB_HOMETEXT` variable. + By default set to 'indextext.html'. + +$projects_list_description_width:: + The width (in characters) of the "Description" column of the projects list. + Longer descriptions will be truncated (trying to cut at word boundary); + the full description is available in the 'title' attribute (usually shown on + mouseover). The default is 25, which might be too small if you + use long project descriptions. + +$default_projects_order:: + Default value of ordering of projects on projects list page, which + means the ordering used if you don't explicitly sort projects list + (if there is no "o" CGI query parameter in the URL). Valid values + are "none" (unsorted), "project" (projects are by project name, + i.e. path to repository relative to `$projectroot`), "descr" + (project description), "owner", and "age" (by date of most current + commit). ++ +Default value is "project". Unknown value means unsorted. + + +Changing gitweb's behavior +~~~~~~~~~~~~~~~~~~~~~~~~~~ +These configuration variables control _internal_ gitweb behavior. + +$default_blob_plain_mimetype:: + Default mimetype for the blob_plain (raw) view, if mimetype checking + doesn't result in some other type; by default "text/plain". + Gitweb guesses mimetype of a file to display based on extension + of its filename, using `$mimetypes_file` (if set and file exists) + and '/etc/mime.types' files (see *mime.types*(5) manpage; only + filename extension rules are supported by gitweb). + +$default_text_plain_charset:: + Default charset for text files. If this is not set, the web server + configuration will be used. Unset by default. + +$fallback_encoding:: + Gitweb assumes this charset when a line contains non-UTF-8 characters. + The fallback decoding is used without error checking, so it can be even + "utf-8". The value must be a valid encoding; see the *Encoding::Supported*(3pm) + man page for a list. The default is "latin1", aka. "iso-8859-1". + +@diff_opts:: + Rename detection options for git-diff and git-diff-tree. The default is + (\'-M'); set it to (\'-C') or (\'-C', \'-C') to also detect copies, + or set it to () i.e. empty list if you don't want to have renames + detection. ++ +*Note* that rename and especially copy detection can be quite +CPU-intensive. Note also that non git tools can have problems with +patches generated with options mentioned above, especially when they +involve file copies (\'-C') or criss-cross renames (\'-B'). + + +Some optional features and policies +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +Most of features are configured via `%feature` hash; however some of extra +gitweb features can be turned on and configured using variables described +below. This list beside configuration variables that control how gitweb +looks does contain variables configuring administrative side of gitweb +(e.g. cross-site scripting prevention; admittedly this as side effect +affects how "summary" pages look like, or load limiting). + +@git_base_url_list:: + List of git base URLs. These URLs are used to generate URLs + describing from where to fetch a project, which are shown on + project summary page. The full fetch URL is "`$git_base_url/$project`", + for each element of this list. You can set up multiple base URLs + (for example one for `git://` protocol, and one for `http://` + protocol). ++ +Note that per repository configuration can be set in '$GIT_DIR/cloneurl' +file, or as values of multi-value `gitweb.url` configuration variable in +project config. Per-repository configuration takes precedence over value +composed from `@git_base_url_list` elements and project name. ++ +You can setup one single value (single entry/item in this list) at build +time by setting the `GITWEB_BASE_URL` built-time configuration variable. +By default it is set to (), i.e. an empty list. This means that gitweb +would not try to create project URL (to fetch) from project name. + +$projects_list_group_categories:: + Whether to enables the grouping of projects by category on the project + list page. The category of a project is determined by the + `$GIT_DIR/category` file or the `gitweb.category` variable in each + repository's configuration. Disabled by default (set to 0). + +$project_list_default_category:: + Default category for projects for which none is specified. If this is + set to the empty string, such projects will remain uncategorized and + listed at the top, above categorized projects. Used only if project + categories are enabled, which means if `$projects_list_group_categories` + is true. By default set to "" (empty string). + +$prevent_xss:: + If true, some gitweb features are disabled to prevent content in + repositories from launching cross-site scripting (XSS) attacks. Set this + to true if you don't trust the content of your repositories. + False by default (set to 0). + +$maxload:: + Used to set the maximum load that we will still respond to gitweb queries. + If the server load exceeds this value then gitweb will return + "503 Service Unavailable" error. The server load is taken to be 0 + if gitweb cannot determine its value. Currently it works only on Linux, + where it uses '/proc/loadavg'; the load there is the number of active + tasks on the system -- processes that are actually running -- averaged + over the last minute. ++ +Set `$maxload` to undefined value (`undef`) to turn this feature off. +The default value is 300. + +$per_request_config:: + If this is set to code reference, it will be run once for each request. + You can set parts of configuration that change per session this way. + For example, one might use the following code in a gitweb configuration + file ++ +-------------------------------------------------------------------------------- +our $per_request_config = sub { + $ENV{GL_USER} = $cgi->remote_user || "gitweb"; +}; +-------------------------------------------------------------------------------- ++ +If `$per_request_config` is not a code reference, it is interpreted as boolean +value. If it is true gitweb will process config files once per request, +and if it is false gitweb will process config files only once, each time it +is executed. True by default (set to 1). ++ +*NOTE*: `$my_url`, `$my_uri`, and `$base_url` are overwritten with their default +values before every request, so if you want to change them, be sure to set +this variable to true or a code reference effecting the desired changes. ++ +This variable matters only when using persistent web environments that +serve multiple requests using single gitweb instance, like mod_perl, +FastCGI or Plackup. + + +Other variables +~~~~~~~~~~~~~~~ +Usually you should not need to change (adjust) any of configuration +variables described below; they should be automatically set by gitweb to +correct value. + + +$version:: + Gitweb version, set automatically when creating gitweb.cgi from + gitweb.perl. You might want to modify it if you are running modified + gitweb, for example ++ +--------------------------------------------------- +our $version .= " with caching"; +--------------------------------------------------- ++ +if you run modified version of gitweb with caching support. This variable +is purely informational, used e.g. in the "generator" meta header in HTML +header. + +$my_url:: +$my_uri:: + Full URL and absolute URL of the gitweb script; + in earlier versions of gitweb you might have need to set those + variables, but now there should be no need to do it. See + `$per_request_config` if you need to set them still. + +$base_url:: + Base URL for relative URLs in pages generated by gitweb, + (e.g. `$logo`, `$favicon`, `@stylesheets` if they are relative URLs), + needed and used '<base href="$base_url">' only for URLs with nonempty + PATH_INFO. Usually gitweb sets its value correctly, + and there is no need to set this variable, e.g. to $my_uri or "/". + See `$per_request_config` if you need to override it anyway. + + +CONFIGURING GITWEB FEATURES +--------------------------- +Many gitweb features can be enabled (or disabled) and configured using the +`%feature` hash. Names of gitweb features are keys of this hash. + +Each `%feature` hash element is a hash reference and has the following +structure: +---------------------------------------------------------------------- +"<feature_name>" => { + "sub" => <feature-sub (subroutine)>, + "override" => <allow-override (boolean)>, + "default" => [ <options>... ] +}, +---------------------------------------------------------------------- +Some features cannot be overridden per project. For those +features the structure of appropriate `%feature` hash element has a simpler +form: +---------------------------------------------------------------------- +"<feature_name>" => { + "override" => 0, + "default" => [ <options>... ] +}, +---------------------------------------------------------------------- +As one can see it lacks the \'sub' element. + +The meaning of each part of feature configuration is described +below: + +default:: + List (array reference) of feature parameters (if there are any), + used also to toggle (enable or disable) given feature. ++ +Note that it is currently *always* an array reference, even if +feature doesn't accept any configuration parameters, and \'default' +is used only to turn it on or off. In such case you turn feature on +by setting this element to `[1]`, and torn it off by setting it to +`[0]`. See also the passage about the "blame" feature in the "Examples" +section. ++ +To disable features that accept parameters (are configurable), you +need to set this element to empty list i.e. `[]`. + +override:: + If this field has a true value then the given feature is + overriddable, which means that it can be configured + (or enabled/disabled) on a per-repository basis. ++ +Usually given "<feature>" is configurable via the `gitweb.<feature>` +config variable in the per-repository git configuration file. ++ +*Note* that no feature is overriddable by default. + +sub:: + Internal detail of implementation. What is important is that + if this field is not present then per-repository override for + given feature is not supported. ++ +You wouldn't need to ever change it in gitweb config file. + + +Features in `%feature` +~~~~~~~~~~~~~~~~~~~~~~ +The gitweb features that are configurable via `%feature` hash are listed +below. This should be a complete list, but ultimately the authoritative +and complete list is in gitweb.cgi source code, with features described +in the comments. + +blame:: + Enable the "blame" and "blame_incremental" blob views, showing for + each line the last commit that modified it; see linkgit:git-blame[1]. + This can be very CPU-intensive and is therefore disabled by default. ++ +This feature can be configured on a per-repository basis via +repository's `gitweb.blame` configuration variable (boolean). + +snapshot:: + Enable and configure the "snapshot" action, which allows user to + download a compressed archive of any tree or commit, as produced + by linkgit:git-archive[1] and possibly additionally compressed. + This can potentially generate high traffic if you have large project. ++ +The value of \'default' is a list of names of snapshot formats, +defined in `%known_snapshot_formats` hash, that you wish to offer. +Supported formats include "tgz", "tbz2", "txz" (gzip/bzip2/xz +compressed tar archive) and "zip"; please consult gitweb sources for +a definitive list. By default only "tgz" is offered. ++ +This feature can be configured on a per-repository basis via +repository's `gitweb.blame` configuration variable, which contains +a comma separated list of formats or "none" to disable snapshots. +Unknown values are ignored. + +grep:: + Enable grep search, which lists the files in currently selected + tree (directory) containing the given string; see linkgit:git-grep[1]. + This can be potentially CPU-intensive, of course. Enabled by default. ++ +This feature can be configured on a per-repository basis via +repository's `gitweb.grep` configuration variable (boolean). + +pickaxe:: + Enable the so called pickaxe search, which will list the commits + that introduced or removed a given string in a file. This can be + practical and quite faster alternative to "blame" action, but it is + still potentially CPU-intensive. Enabled by default. ++ +The pickaxe search is described in linkgit:git-log[1] (the +description of `-S<string>` option, which refers to pickaxe entry in +linkgit:gitdiffcore[7] for more details). ++ +This feature can be configured on a per-repository basis by setting +repository's `gitweb.pickaxe` configuration variable (boolean). + +show-sizes:: + Enable showing size of blobs (ordinary files) in a "tree" view, in a + separate column, similar to what `ls -l` does; see description of + `-l` option in linkgit:git-ls-tree[1] manpage. This costs a bit of + I/O. Enabled by default. ++ +This feature can be configured on a per-repository basis via +repository's `gitweb.showsizes` configuration variable (boolean). + +patches:: + Enable and configure "patches" view, which displays list of commits in email + (plain text) output format; see also linkgit:git-format-patch[1]. + The value is the maximum number of patches in a patchset generated + in "patches" view. Set the 'default' field to a list containing single + item of or to an empty list to disable patch view, or to a list + containing a single negative number to remove any limit. + Default value is 16. ++ +This feature can be configured on a per-repository basis via +repository's `gitweb.patches` configuration variable (integer). + +avatar:: + Avatar support. When this feature is enabled, views such as + "shortlog" or "commit" will display an avatar associated with + the email of each committer and author. ++ +Currently available providers are *"gravatar"* and *"picon"*. +Only one provider at a time can be selected ('default' is one element list). +If an unknown provider is specified, the feature is disabled. +*Note* that some providers might require extra Perl packages to be +installed; see 'gitweb/INSTALL' for more details. ++ +This feature can be configured on a per-repository basis via +repository's `gitweb.avatar` configuration variable. ++ +See also `%avatar_size` with pixel sizes for icons and avatars +("default" is used for one-line like "log" and "shortlog", "double" +is used for two-line like "commit", "commitdiff" or "tag"). If the +default font sizes or lineheights are changed (e.g. via adding extra +CSS stylesheet in `@stylesheets`), it may be appropriate to change +these values. + +highlight:: + Server-side syntax highlight support in "blob" view. It requires + `$highlight_bin` program to be available (see the description of + this variable in the "Configuration variables" section above), + and therefore is disabled by default. ++ +This feature can be configured on a per-repository basis via +repository's `gitweb.highlight` configuration variable (boolean). + +remote_heads:: + Enable displaying remote heads (remote-tracking branches) in the "heads" + list. In most cases the list of remote-tracking branches is an + unnecessary internal private detail, and this feature is therefore + disabled by default. linkgit:git-instaweb[1], which is usually used + to browse local repositories, enables and uses this feature. ++ +This feature can be configured on a per-repository basis via +repository's `gitweb.remote_heads` configuration variable (boolean). + + +The remaining features cannot be overridden on a per project basis. + +search:: + Enable text search, which will list the commits which match author, + committer or commit text to a given string; see the description of + `--author`, `--committer` and `--grep` options in linkgit:git-log[1] + manpage. Enabled by default. ++ +Project specific override is not supported. + +forks:: + If this feature is enabled, gitweb considers projects in + subdirectories of project root (basename) to be forks of existing + projects. For each project `$projname.git`, projects in the + `$projname/` directory and its subdirectories will not be + shown in the main projects list. Instead, a \'+' mark is shown + next to `$projname`, which links to a "forks" view that lists all + the forks (all projects in `$projname/` subdirectory). Additionally + a "forks" view for a project is linked from project summary page. ++ +If the project list is taken from a file (`$projects_list` points to a +file), forks are only recognized if they are listed after the main project +in that file. ++ +Project specific override is not supported. + +actions:: + Insert custom links to the action bar of all project pages. This + allows you to link to third-party scripts integrating into gitweb. ++ +The "default" value consists of a list of triplets in the form +`("<label>", "<link>", "<position>")` where "position" is the label +after which to insert the link, "link" is a format string where `%n` +expands to the project name, `%f` to the project path within the +filesystem (i.e. "$projectroot/$project"), `%h` to the current hash +(\'h' gitweb parameter) and `%b` to the current hash base +(\'hb' gitweb parameter); `%%` expands to \'%'. ++ +For example, at the time this page was written, the http://repo.or.cz[] +git hosting site set it to the following to enable graphical log +(using the third party tool *git-browser*): ++ +---------------------------------------------------------------------- +$feature{'actions'}{'default'} = + [ ('graphiclog', '/git-browser/by-commit.html?r=%n', 'summary')]; +---------------------------------------------------------------------- ++ +This adds a link titled "graphiclog" after the "summary" link, leading to +`git-browser` script, passing `r=<project>` as a query parameter. ++ +Project specific override is not supported. + +timed:: + Enable displaying how much time and how many git commands it took to + generate and display each page in the page footer (at the bottom of + page). For example the footer might contain: "This page took 6.53325 + seconds and 13 git commands to generate." Disabled by default. ++ +Project specific override is not supported. + +javascript-timezone:: + Enable and configure the ability to change a common timezone for dates + in gitweb output via JavaScript. Dates in gitweb output include + authordate and committerdate in "commit", "commitdiff" and "log" + views, and taggerdate in "tag" view. Enabled by default. ++ +The value is a list of three values: a default timezone (for if the client +hasn't selected some other timezone and saved it in a cookie), a name of cookie +where to store selected timezone, and a CSS class used to mark up +dates for manipulation. If you want to turn this feature off, set "default" +to empty list: `[]`. ++ +Typical gitweb config files will only change starting (default) timezone, +and leave other elements at their default values: ++ +--------------------------------------------------------------------------- +$feature{'javascript-timezone'}{'default'}[0] = "utc"; +--------------------------------------------------------------------------- ++ +The example configuration presented here is guaranteed to be backwards +and forward compatible. ++ +Timezone values can be "local" (for local timezone that browser uses), "utc" +(what gitweb uses when JavaScript or this feature is disabled), or numerical +timezones in the form of "+/-HHMM", such as "+0200". ++ +Project specific override is not supported. + + +EXAMPLES +-------- + +To enable blame, pickaxe search, and snapshot support (allowing "tar.gz" and +"zip" snapshots), while allowing individual projects to turn them off, put +the following in your GITWEB_CONFIG file: + + $feature{'blame'}{'default'} = [1]; + $feature{'blame'}{'override'} = 1; + + $feature{'pickaxe'}{'default'} = [1]; + $feature{'pickaxe'}{'override'} = 1; + + $feature{'snapshot'}{'default'} = ['zip', 'tgz']; + $feature{'snapshot'}{'override'} = 1; + +If you allow overriding for the snapshot feature, you can specify which +snapshot formats are globally disabled. You can also add any command line +options you want (such as setting the compression level). For instance, you +can disable Zip compressed snapshots and set *gzip*(1) to run at level 6 by +adding the following lines to your gitweb configuration file: + + $known_snapshot_formats{'zip'}{'disabled'} = 1; + $known_snapshot_formats{'tgz'}{'compressor'} = ['gzip','-6']; + +ENVIRONMENT +----------- +The location of per-instance and system-wide configuration files can be +overridden using the following environment variables: + +GITWEB_CONFIG:: + Sets location of per-instance configuration file. +GITWEB_CONFIG_SYSTEM:: + Sets location of fallback system-wide configuration file. + This file is read only if per-instance one does not exist. +GITWEB_CONFIG_COMMON:: + Sets location of common system-wide configuration file. + + +FILES +----- +gitweb_config.perl:: + This is default name of per-instance configuration file. The + format of this file is described above. +/etc/gitweb.conf:: + This is default name of fallback system-wide configuration + file. This file is used only if per-instance configuration + variable is not found. +/etc/gitweb-common.conf:: + This is default name of common system-wide configuration + file. + + +SEE ALSO +-------- +linkgit:gitweb[1], linkgit:git-instaweb[1] + +'gitweb/README', 'gitweb/INSTALL' + +GIT +--- +Part of the linkgit:git[1] suite diff --git a/Documentation/gitweb.txt b/Documentation/gitweb.txt new file mode 100644 index 0000000000..168e8bfed6 --- /dev/null +++ b/Documentation/gitweb.txt @@ -0,0 +1,704 @@ +gitweb(1) +========= + +NAME +---- +gitweb - Git web interface (web frontend to Git repositories) + +SYNOPSIS +-------- +To get started with gitweb, run linkgit:git-instaweb[1] from a git repository. +This would configure and start your web server, and run web browser pointing to +gitweb. + + +DESCRIPTION +----------- +Gitweb provides a web interface to git repositories. Its features include: + +* Viewing multiple Git repositories with common root. +* Browsing every revision of the repository. +* Viewing the contents of files in the repository at any revision. +* Viewing the revision log of branches, history of files and directories, + see what was changed when, by who. +* Viewing the blame/annotation details of any file (if enabled). +* Generating RSS and Atom feeds of commits, for any branch. + The feeds are auto-discoverable in modern web browsers. +* Viewing everything that was changed in a revision, and step through + revisions one at a time, viewing the history of the repository. +* Finding commits which commit messages matches given search term. + +See http://git.kernel.org/?p=git/git.git;a=tree;f=gitweb[] or +http://repo.or.cz/w/git.git/tree/HEAD:/gitweb/[] for gitweb source code, +browsed using gitweb itself. + + +CONFIGURATION +------------- +Various aspects of gitweb's behavior can be controlled through the configuration +file 'gitweb_config.perl' or '/etc/gitweb.conf'. See the linkgit:gitweb.conf[5] +for details. + +Repositories +~~~~~~~~~~~~ +Gitweb can show information from one or more Git repositories. These +repositories have to be all on local filesystem, and have to share common +repository root, i.e. be all under a single parent repository (but see also +"Advanced web server setup" section, "Webserver configuration with multiple +projects' root" subsection). + +----------------------------------------------------------------------- +our $projectroot = '/path/to/parent/directory'; +----------------------------------------------------------------------- + +The default value for `$projectroot` is '/pub/git'. You can change it during +building gitweb via `GITWEB_PROJECTROOT` build configuration variable. + +By default all git repositories under `$projectroot` are visible and available +to gitweb. The list of projects is generated by default by scanning the +`$projectroot` directory for git repositories (for object databases to be +more exact; gitweb is not interested in a working area, and is best suited +to showing "bare" repositories). + +The name of the repository in gitweb is the path to its `$GIT_DIR` (its object +database) relative to `$projectroot`. Therefore the repository $repo can be +found at "$projectroot/$repo". + + +Projects list file format +~~~~~~~~~~~~~~~~~~~~~~~~~ +Instead of having gitweb find repositories by scanning filesystem +starting from $projectroot, you can provide a pre-generated list of +visible projects by setting `$projects_list` to point to a plain text +file with a list of projects (with some additional info). + +This file uses the following format: + +* One record (for project / repository) per line; does not support line +continuation (newline escaping). + +* Leading and trailing whitespace are ignored. + +* Whitespace separated fields; any run of whitespace can be used as field +separator (rules for Perl's "`split(" ", $line)`"). + +* Fields use modified URI encoding, defined in RFC 3986, section 2.1 +(Percent-Encoding), or rather "Query string encoding" (see +link:http://en.wikipedia.org/wiki/Query_string#URL_encoding[]), the difference +being that SP (" ") can be encoded as "{plus}" (and therefore "{plus}" has to be +also percent-encoded). ++ +Reserved characters are: "%" (used for encoding), "{plus}" (can be used to +encode SPACE), all whitespace characters as defined in Perl, including SP, +TAB and LF, (used to separate fields in a record). + +* Currently recognized fields are: +<repository path>:: + path to repository GIT_DIR, relative to `$projectroot` +<repository owner>:: + displayed as repository owner, preferably full name, or email, + or both + +You can generate the projects list index file using the project_index action +(the 'TXT' link on projects list page) directly from gitweb; see also +"Generating projects list using gitweb" section below. + +Example contents: +----------------------------------------------------------------------- +foo.git Joe+R+Hacker+<joe@example.com> +foo/bar.git O+W+Ner+<owner@example.org> +----------------------------------------------------------------------- + + +By default this file controls only which projects are *visible* on projects +list page (note that entries that do not point to correctly recognized git +repositories won't be displayed by gitweb). Even if a project is not +visible on projects list page, you can view it nevertheless by hand-crafting +a gitweb URL. By setting `$strict_export` configuration variable (see +linkgit:gitweb.conf[5]) to true value you can allow viewing only of +repositories also shown on the overview page (i.e. only projects explicitly +listed in projects list file will be accessible). + + +Generating projects list using gitweb +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +We assume that GITWEB_CONFIG has its default Makefile value, namely +'gitweb_config.perl'. Put the following in 'gitweb_make_index.perl' file: +---------------------------------------------------------------------------- +read_config_file("gitweb_config.perl"); +$projects_list = $projectroot; +---------------------------------------------------------------------------- + +Then create the following script to get list of project in the format +suitable for GITWEB_LIST build configuration variable (or +`$projects_list` variable in gitweb config): + +---------------------------------------------------------------------------- +#!/bin/sh + +export GITWEB_CONFIG="gitweb_make_index.perl" +export GATEWAY_INTERFACE="CGI/1.1" +export HTTP_ACCEPT="*/*" +export REQUEST_METHOD="GET" +export QUERY_STRING="a=project_index" + +perl -- /var/www/cgi-bin/gitweb.cgi +---------------------------------------------------------------------------- + +Run this script and save its output to a file. This file could then be used +as projects list file, which means that you can set `$projects_list` to its +filename. + + +Controlling access to git repositories +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +By default all git repositories under `$projectroot` are visible and +available to gitweb. You can however configure how gitweb controls access +to repositories. + +* As described in "Projects list file format" section, you can control which +projects are *visible* by selectively including repositories in projects +list file, and setting `$projects_list` gitweb configuration variable to +point to it. With `$strict_export` set, projects list file can be used to +control which repositories are *available* as well. + +* You can configure gitweb to only list and allow viewing of the explicitly +exported repositories, via `$export_ok` variable in gitweb config file; see +linkgit:gitweb.conf[5] manpage. If it evaluates to true, gitweb shows +repositories only if this file named by `$export_ok` exists in its object +database (if directory has the magic file named `$export_ok`). ++ +For example linkgit:git-daemon[1] by default (unless `--export-all` option +is used) allows pulling only for those repositories that have +'git-daemon-export-ok' file. Adding ++ +-------------------------------------------------------------------------- +our $export_ok = "git-daemon-export-ok"; +-------------------------------------------------------------------------- ++ +makes gitweb show and allow access only to those repositories that can be +fetched from via `git://` protocol. + +* Finally, it is possible to specify an arbitrary perl subroutine that will +be called for each repository to determine if it can be exported. The +subroutine receives an absolute path to the project (repository) as its only +parameter (i.e. "$projectroot/$project"). ++ +For example, if you use mod_perl to run the script, and have dumb +HTTP protocol authentication configured for your repositories, you +can use the following hook to allow access only if the user is +authorized to read the files: ++ +-------------------------------------------------------------------------- +$export_auth_hook = sub { + use Apache2::SubRequest (); + use Apache2::Const -compile => qw(HTTP_OK); + my $path = "$_[0]/HEAD"; + my $r = Apache2::RequestUtil->request; + my $sub = $r->lookup_file($path); + return $sub->filename eq $path + && $sub->status == Apache2::Const::HTTP_OK; +}; +-------------------------------------------------------------------------- + + +Per-repository gitweb configuration +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +You can configure individual repositories shown in gitweb by creating file +in the 'GIT_DIR' of git repository, or by setting some repo configuration +variable (in 'GIT_DIR/config', see linkgit:git-config[1]). + +You can use the following files in repository: + +README.html:: + A html file (HTML fragment) which is included on the gitweb project + "summary" page inside `<div>` block element. You can use it for longer + description of a project, to provide links (for example to project's + homepage), etc. This is recognized only if XSS prevention is off + (`$prevent_xss` is false, see linkgit:gitweb.conf[5]); a way to include + a README safely when XSS prevention is on may be worked out in the + future. + +description (or `gitweb.description`):: + Short (shortened to `$projects_list_description_width` in the projects + list page, which is 25 characters by default; see + linkgit:gitweb.conf[5]) single line description of a project (of a + repository). Plain text file; HTML will be escaped. By default set to ++ +------------------------------------------------------------------------------- +Unnamed repository; edit this file to name it for gitweb. +------------------------------------------------------------------------------- ++ +from the template during repository creation, usually installed in +'/usr/share/git-core/templates/'. You can use the `gitweb.description` repo +configuration variable, but the file takes precedence. + +category (or `gitweb.category`):: + Singe line category of a project, used to group projects if + `$projects_list_group_categories` is enabled. By default (file and + configuration variable absent), uncategorized projects are put in the + `$project_list_default_category` category. You can use the + `gitweb.category` repo configuration variable, but the file takes + precedence. ++ +The configuration variables `$projects_list_group_categories` and +`$project_list_default_category` are described in linkgit:gitweb.conf[5] + +cloneurl (or multiple-valued `gitweb.url`):: + File with repository URL (used for clone and fetch), one per line. + Displayed in the project summary page. You can use multiple-valued + `gitweb.url` repository configuration variable for that, but the file + takes precedence. ++ +This is per-repository enhancement / version of global prefix-based +`@git_base_url_list` gitweb configuration variable (see +linkgit:gitweb.conf[5]). + +gitweb.owner:: + You can use the `gitweb.owner` repository configuration variable to set + repository's owner. It is displayed in the project list and summary + page. ++ +If it's not set, filesystem directory's owner is used (via GECOS field, +i.e. real name field from *getpwuid*(3)) if `$projects_list` is unset +(gitweb scans `$projectroot` for repositories); if `$projects_list` +points to file with list of repositories, then project owner defaults to +value from this file for given repository. + +various `gitweb.*` config variables (in config):: + Read description of `%feature` hash for detailed list, and descriptions. + See also "Configuring gitweb features" section in linkgit:gitweb.conf[5] + + +ACTIONS, AND URLS +----------------- +Gitweb can use path_info (component) based URLs, or it can pass all necessary +information via query parameters. The typical gitweb URLs are broken down in to +five components: + +----------------------------------------------------------------------- +.../gitweb.cgi/<repo>/<action>/<revision>:/<path>?<arguments> +----------------------------------------------------------------------- + +repo:: + The repository the action will be performed on. ++ +All actions except for those that list all available projects, +in whatever form, require this parameter. + +action:: + The action that will be run. Defaults to 'projects_list' if repo + is not set, and to 'summary' otherwise. + +revision:: + Revision shown. Defaults to HEAD. + +path:: + The path within the <repository> that the action is performed on, + for those actions that require it. + +arguments:: + Any arguments that control the behaviour of the action. + +Some actions require or allow to specify two revisions, and sometimes even two +pathnames. In most general form such path_info (component) based gitweb URL +looks like this: + +----------------------------------------------------------------------- +.../gitweb.cgi/<repo>/<action>/<revision_from>:/<path_from>..<revision_to>:/<path_to>?<arguments> +----------------------------------------------------------------------- + + +Each action is implemented as a subroutine, and must be present in %actions +hash. Some actions are disabled by default, and must be turned on via feature +mechanism. For example to enable 'blame' view add the following to gitweb +configuration file: + +----------------------------------------------------------------------- +$feature{'blame'}{'default'} = [1]; +----------------------------------------------------------------------- + + +Actions: +~~~~~~~~ +The standard actions are: + +project_list:: + Lists the available Git repositories. This is the default command if no + repository is specified in the URL. + +summary:: + Displays summary about given repository. This is the default command if + no action is specified in URL, and only repository is specified. + +heads:: +remotes:: + Lists all local or all remote-tracking branches in given repository. ++ +The latter is not available by default, unless configured. + +tags:: + List all tags (lightweight and annotated) in given repository. + +blob:: +tree:: + Shows the files and directories in a given repository path, at given + revision. This is default command if no action is specified in the URL, + and path is given. + +blob_plain:: + Returns the raw data for the file in given repository, at given path and + revision. Links to this action are marked 'raw'. + +blobdiff:: + Shows the difference between two revisions of the same file. + +blame:: +blame_incremental:: + Shows the blame (also called annotation) information for a file. On a + per line basis it shows the revision in which that line was last changed + and the user that committed the change. The incremental version (which + if configured is used automatically when JavaScript is enabled) uses + Ajax to incrementally add blame info to the contents of given file. ++ +This action is disabled by default for performance reasons. + +commit:: +commitdiff:: + Shows information about a specific commit in a repository. The 'commit' + view shows information about commit in more detail, the 'commitdiff' + action shows changeset for given commit. + +patch:: + Returns the commit in plain text mail format, suitable for applying with + linkgit:git-am[1]. + +tag:: + Display specific annotated tag (tag object). + +log:: +shortlog:: + Shows log information (commit message or just commit subject) for a + given branch (starting from given revision). ++ +The 'shortlog' view is more compact; it shows one commit per line. + +history:: + Shows history of the file or directory in a given repository path, + starting from given revision (defaults to HEAD, i.e. default branch). ++ +This view is similar to 'shortlog' view. + +rss:: +atom:: + Generates an RSS (or Atom) feed of changes to repository. + + +WEBSERVER CONFIGURATION +----------------------- +This section explains how to configure some common webservers to run gitweb. In +all cases, `/path/to/gitweb` in the examples is the directory you ran installed +gitweb in, and contains `gitweb_config.perl`. + +If you've configured a web server that isn't listed here for gitweb, please send +in the instructions so they can be included in a future release. + +Apache as CGI +~~~~~~~~~~~~~ +Apache must be configured to support CGI scripts in the directory in +which gitweb is installed. Let's assume that it is '/var/www/cgi-bin' +directory. + +----------------------------------------------------------------------- +ScriptAlias /cgi-bin/ "/var/www/cgi-bin/" + +<Directory "/var/www/cgi-bin"> + Options Indexes FollowSymlinks ExecCGI + AllowOverride None + Order allow,deny + Allow from all +</Directory> +----------------------------------------------------------------------- + +With that configuration the full path to browse repositories would be: + + http://server/cgi-bin/gitweb.cgi + +Apache with mod_perl, via ModPerl::Registry +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +You can use mod_perl with gitweb. You must install Apache::Registry +(for mod_perl 1.x) or ModPerl::Registry (for mod_perl 2.x) to enable +this support. + +Assuming that gitweb is installed to '/var/www/perl', the following +Apache configuration (for mod_perl 2.x) is suitable. + +----------------------------------------------------------------------- +Alias /perl "/var/www/perl" + +<Directory "/var/www/perl"> + SetHandler perl-script + PerlResponseHandler ModPerl::Registry + PerlOptions +ParseHeaders + Options Indexes FollowSymlinks +ExecCGI + AllowOverride None + Order allow,deny + Allow from all +</Directory> +----------------------------------------------------------------------- + +With that configuration the full path to browse repositories would be: + + http://server/perl/gitweb.cgi + +Apache with FastCGI +~~~~~~~~~~~~~~~~~~~ +Gitweb works with Apache and FastCGI. First you need to rename, copy +or symlink gitweb.cgi to gitweb.fcgi. Let's assume that gitweb is +installed in '/usr/share/gitweb' directory. The following Apache +configuration is suitable (UNTESTED!) + +----------------------------------------------------------------------- +FastCgiServer /usr/share/gitweb/gitweb.cgi +ScriptAlias /gitweb /usr/share/gitweb/gitweb.cgi + +Alias /gitweb/static /usr/share/gitweb/static +<Directory /usr/share/gitweb/static> + SetHandler default-handler +</Directory> +----------------------------------------------------------------------- + +With that configuration the full path to browse repositories would be: + + http://server/gitweb + + +ADVANCED WEB SERVER SETUP +------------------------- +All of those examples use request rewriting, and need `mod_rewrite` +(or equivalent; examples below are written for Apache). + +Single URL for gitweb and for fetching +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +If you want to have one URL for both gitweb and your `http://` +repositories, you can configure Apache like this: + +----------------------------------------------------------------------- +<VirtualHost *:80> + ServerName git.example.org + DocumentRoot /pub/git + SetEnv GITWEB_CONFIG /etc/gitweb.conf + + # turning on mod rewrite + RewriteEngine on + + # make the front page an internal rewrite to the gitweb script + RewriteRule ^/$ /cgi-bin/gitweb.cgi + + # make access for "dumb clients" work + RewriteRule ^/(.*\.git/(?!/?(HEAD|info|objects|refs)).*)?$ \ + /cgi-bin/gitweb.cgi%{REQUEST_URI} [L,PT] +</VirtualHost> +----------------------------------------------------------------------- + +The above configuration expects your public repositories to live under +'/pub/git' and will serve them as `http://git.domain.org/dir-under-pub-git`, +both as cloneable GIT URL and as browseable gitweb interface. If you then +start your linkgit:git-daemon[1] with `--base-path=/pub/git --export-all` +then you can even use the `git://` URL with exactly the same path. + +Setting the environment variable `GITWEB_CONFIG` will tell gitweb to use the +named file (i.e. in this example '/etc/gitweb.conf') as a configuration for +gitweb. You don't really need it in above example; it is required only if +your configuration file is in different place than built-in (during +compiling gitweb) 'gitweb_config.perl' or '/etc/gitweb.conf'. See +linkgit:gitweb.conf[5] for details, especially information about precedence +rules. + +If you use the rewrite rules from the example you *might* also need +something like the following in your gitweb configuration file +('/etc/gitweb.conf' following example): +---------------------------------------------------------------------------- +@stylesheets = ("/some/absolute/path/gitweb.css"); +$my_uri = "/"; +$home_link = "/"; +$per_request_config = 1; +---------------------------------------------------------------------------- +Nowadays though gitweb should create HTML base tag when needed (to set base +URI for relative links), so it should work automatically. + + +Webserver configuration with multiple projects' root +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +If you want to use gitweb with several project roots you can edit your +Apache virtual host and gitweb configuration files in the following way. + +The virtual host configuration (in Apache configuration file) should look +like this: +-------------------------------------------------------------------------- +<VirtualHost *:80> + ServerName git.example.org + DocumentRoot /pub/git + SetEnv GITWEB_CONFIG /etc/gitweb.conf + + # turning on mod rewrite + RewriteEngine on + + # make the front page an internal rewrite to the gitweb script + RewriteRule ^/$ /cgi-bin/gitweb.cgi [QSA,L,PT] + + # look for a public_git folder in unix users' home + # http://git.example.org/~<user>/ + RewriteRule ^/\~([^\/]+)(/|/gitweb.cgi)?$ /cgi-bin/gitweb.cgi \ + [QSA,E=GITWEB_PROJECTROOT:/home/$1/public_git/,L,PT] + + # http://git.example.org/+<user>/ + #RewriteRule ^/\+([^\/]+)(/|/gitweb.cgi)?$ /cgi-bin/gitweb.cgi \ + [QSA,E=GITWEB_PROJECTROOT:/home/$1/public_git/,L,PT] + + # http://git.example.org/user/<user>/ + #RewriteRule ^/user/([^\/]+)/(gitweb.cgi)?$ /cgi-bin/gitweb.cgi \ + [QSA,E=GITWEB_PROJECTROOT:/home/$1/public_git/,L,PT] + + # defined list of project roots + RewriteRule ^/scm(/|/gitweb.cgi)?$ /cgi-bin/gitweb.cgi \ + [QSA,E=GITWEB_PROJECTROOT:/pub/scm/,L,PT] + RewriteRule ^/var(/|/gitweb.cgi)?$ /cgi-bin/gitweb.cgi \ + [QSA,E=GITWEB_PROJECTROOT:/var/git/,L,PT] + + # make access for "dumb clients" work + RewriteRule ^/(.*\.git/(?!/?(HEAD|info|objects|refs)).*)?$ \ + /cgi-bin/gitweb.cgi%{REQUEST_URI} [L,PT] +</VirtualHost> +-------------------------------------------------------------------------- + +Here actual project root is passed to gitweb via `GITWEB_PROJECT_ROOT` +environment variable from a web server, so you need to put the following +line in gitweb configuration file ('/etc/gitweb.conf' in above example): +-------------------------------------------------------------------------- +$projectroot = $ENV{'GITWEB_PROJECTROOT'} || "/pub/git"; +-------------------------------------------------------------------------- +*Note* that this requires to be set for each request, so either +`$per_request_config` must be false, or the above must be put in code +referenced by `$per_request_config`; + +These configurations enable two things. First, each unix user (`<user>`) of +the server will be able to browse through gitweb git repositories found in +'~/public_git/' with the following url: + + http://git.example.org/~<user>/ + +If you do not want this feature on your server just remove the second +rewrite rule. + +If you already use `mod_userdir` in your virtual host or you don't want to +use the \'~' as first character, just comment or remove the second rewrite +rule, and uncomment one of the following according to what you want. + +Second, repositories found in '/pub/scm/' and '/var/git/' will be accessible +through `http://git.example.org/scm/` and `http://git.example.org/var/`. +You can add as many project roots as you want by adding rewrite rules like +the third and the fourth. + + +PATH_INFO usage +~~~~~~~~~~~~~~~ +If you enable PATH_INFO usage in gitweb by putting +---------------------------------------------------------------------------- +$feature{'pathinfo'}{'default'} = [1]; +---------------------------------------------------------------------------- +in your gitweb configuration file, it is possible to set up your server so +that it consumes and produces URLs in the form + + http://git.example.com/project.git/shortlog/sometag + +i.e. without 'gitweb.cgi' part, by using a configuration such as the +following. This configuration assumes that '/var/www/gitweb' is the +DocumentRoot of your webserver, contains the gitweb.cgi script and +complementary static files (stylesheet, favicon, JavaScript): + +---------------------------------------------------------------------------- +<VirtualHost *:80> + ServerAlias git.example.com + + DocumentRoot /var/www/gitweb + + <Directory /var/www/gitweb> + Options ExecCGI + AddHandler cgi-script cgi + + DirectoryIndex gitweb.cgi + + RewriteEngine On + RewriteCond %{REQUEST_FILENAME} !-f + RewriteCond %{REQUEST_FILENAME} !-d + RewriteRule ^.* /gitweb.cgi/$0 [L,PT] + </Directory> +</VirtualHost> +---------------------------------------------------------------------------- +The rewrite rule guarantees that existing static files will be properly +served, whereas any other URL will be passed to gitweb as PATH_INFO +parameter. + +*Notice* that in this case you don't need special settings for +`@stylesheets`, `$my_uri` and `$home_link`, but you lose "dumb client" +access to your project .git dirs (described in "Single URL for gitweb and +for fetching" section). A possible workaround for the latter is the +following: in your project root dir (e.g. '/pub/git') have the projects +named *without* a .git extension (e.g. '/pub/git/project' instead of +'/pub/git/project.git') and configure Apache as follows: +---------------------------------------------------------------------------- +<VirtualHost *:80> + ServerAlias git.example.com + + DocumentRoot /var/www/gitweb + + AliasMatch ^(/.*?)(\.git)(/.*)?$ /pub/git$1$3 + <Directory /var/www/gitweb> + Options ExecCGI + AddHandler cgi-script cgi + + DirectoryIndex gitweb.cgi + + RewriteEngine On + RewriteCond %{REQUEST_FILENAME} !-f + RewriteCond %{REQUEST_FILENAME} !-d + RewriteRule ^.* /gitweb.cgi/$0 [L,PT] + </Directory> +</VirtualHost> +---------------------------------------------------------------------------- + +The additional AliasMatch makes it so that + + http://git.example.com/project.git + +will give raw access to the project's git dir (so that the project can be +cloned), while + + http://git.example.com/project + +will provide human-friendly gitweb access. + +This solution is not 100% bulletproof, in the sense that if some project has +a named ref (branch, tag) starting with 'git/', then paths such as + + http://git.example.com/project/command/abranch..git/abranch + +will fail with a 404 error. + + +BUGS +---- +Please report any bugs or feature requests to git@vger.kernel.org, +putting "gitweb" in the subject of email. + +SEE ALSO +-------- +linkgit:gitweb.conf[5], linkgit:git-instaweb[1] + +'gitweb/README', 'gitweb/INSTALL' + +GIT +--- +Part of the linkgit:git[1] suite diff --git a/Documentation/howto/using-merge-subtree.txt b/Documentation/howto/using-merge-subtree.txt index 2933056120..1ae8d1214e 100644 --- a/Documentation/howto/using-merge-subtree.txt +++ b/Documentation/howto/using-merge-subtree.txt @@ -25,7 +25,7 @@ What you want is the 'subtree' merge strategy, which helps you in such a situation. In this example, let's say you have the repository at `/path/to/B` (but -it can be an URL as well, if you want). You want to merge the 'master' +it can be a URL as well, if you want). You want to merge the 'master' branch of that repository to the `dir-B` subdirectory in your current branch. diff --git a/Documentation/howto/using-signed-tag-in-pull-request.txt b/Documentation/howto/using-signed-tag-in-pull-request.txt new file mode 100644 index 0000000000..98c0033a55 --- /dev/null +++ b/Documentation/howto/using-signed-tag-in-pull-request.txt @@ -0,0 +1,217 @@ +From: Junio C Hamano <gitster@pobox.com> +Date: Tue, 17 Jan 2011 13:00:00 -0800 +Subject: Using signed tag in pull requests +Abstract: Beginning v1.7.9, a contributor can push a signed tag to her + publishing repository and ask her integrator to pull it. This assures the + integrator that the pulled history is authentic and allows others to + later validate it. +Content-type: text/asciidoc + +Using signed tag in pull requests +================================= + +A typical distributed workflow using Git is for a contributor to fork a +project, build on it, publish the result to her public repository, and ask +the "upstream" person (often the owner of the project where she forked +from) to pull from her public repository. Requesting such a "pull" is made +easy by the `git request-pull` command. + +Earlier, a typical pull request may have started like this: + +------------ + The following changes since commit 406da78032179...: + + Froboz 3.2 (2011-09-30 14:20:57 -0700) + + are available in the git repository at: + + example.com:/git/froboz.git for-xyzzy +------------ + +followed by a shortlog of the changes and a diffstat. + +The request was for a branch name (e.g. `for-xyzzy`) in the public +repository of the contributor, and even though it stated where the +contributor forked her work from, the message did not say anything about +the commit to expect at the tip of the for-xyzzy branch. If the site that +hosts the public repository of the contributor cannot be fully trusted, it +was unnecessarily hard to make sure what was pulled by the integrator was +genuinely what the contributor had produced for the project. Also there +was no easy way for third-party auditors to later verify the resulting +history. + +Starting from Git release v1.7.9, a contributor can add a signed tag to +the commit at the tip of the history and ask the integrator to pull that +signed tag. When the integrator runs `git pull`, the signed tag is +automatically verified to assure that the history is not tampered with. +In addition, the resulting merge commit records the content of the signed +tag, so that other people can verify that the branch merged by the +integrator was signed by the contributor, without fetching the signed tag +used to validate the pull request separately and keeping it in the refs +namespace. + +This document describes the workflow between the contributor and the +integrator, using Git v1.7.9 or later. + + +A contributor or a lieutenant +----------------------------- + +After preparing her work to be pulled, the contributor uses `git tag -s` +to create a signed tag: + +------------ + $ git checkout work + $ ... "git pull" from sublieutenants, "git commit" your own work ... + $ git tag -s -m "Completed frotz feature" frotz-for-xyzzy work +------------ + +Note that this example uses the `-m` option to create a signed tag with +just a one-liner message, but this is for illustration purposes only. It +is advisable to compose a well-written explanation of what the topic does +to justify why it is worthwhile for the integrator to pull it, as this +message will eventually become part of the final history after the +integrator responds to the pull request (as we will see later). + +Then she pushes the tag out to her public repository: + +------------ + $ git push example.com:/git/froboz.git/ +frotz-for-xyzzy +------------ + +There is no need to push the `work` branch or anything else. + +Note that the above command line used a plus sign at the beginning of +`+frotz-for-xyzzy` to allow forcing the update of a tag, as the same +contributor may want to reuse a signed tag with the same name after the +previous pull request has already been responded to. + +The contributor then prepares a message to request a "pull": + +------------ + $ git request-pull v3.2 example.com:/git/froboz.git/ frotz-for-xyzzy >msg.txt +------------ + +The arguments are: + +. the version of the integrator's commit the contributor based her work on; +. the URL of the repository, to which the contributor has pushed what she + wants to get pulled; and +. the name of the tag the contributor wants to get pulled (earlier, she could + write only a branch name here). + +The resulting msg.txt file begins like so: + +------------ + The following changes since commit 406da78032179...: + + Froboz 3.2 (2011-09-30 14:20:57 -0700) + + are available in the git repository at: + + example.com:/git/froboz.git tags/frotz-for-xyzzy + + for you to fetch changes up to 703f05ad5835c...: + + Add tests and documentation for frotz (2011-12-02 10:02:52 -0800) + + ----------------------------------------------- + Completed frotz feature + ----------------------------------------------- +------------ + +followed by a shortlog of the changes and a diffstat. Comparing this with +the earlier illustration of the output from the traditional `git request-pull` +command, the reader should notice that: + +. The tip commit to expect is shown to the integrator; and +. The signed tag message is shown prominently between the dashed lines + before the shortlog. + +The latter is why the contributor would want to justify why pulling her +work is worthwhile when creating the signed tag. The contributor then +opens her favorite MUA, reads msg.txt, edits and sends it to her upstream +integrator. + + +Integrator +---------- + +After receiving such a pull request message, the integrator fetches and +integrates the tag named in the request, with: + +------------ + $ git pull example.com:/git/froboz.git/ tags/frotz-for-xyzzy +------------ + +This operation will always open an editor to allow the integrator to fine +tune the commit log message when merging a signed tag. Also, pulling a +signed tag will always create a merge commit even when the integrator does +not have any new commit since the contributor's work forked (i.e. 'fast +forward'), so that the integrator can properly explain what the merge is +about and why it was made. + +In the editor, the integrator will see something like this: + +------------ + Merge tag 'frotz-for-xyzzy' of example.com:/git/froboz.git/ + + Completed frotz feature + # gpg: Signature made Fri 02 Dec 2011 10:03:01 AM PST using RSA key ID 96AFE6CB + # gpg: Good signature from "Con Tributor <nitfol@example.com>" +------------ + +Notice that the message recorded in the signed tag "Completed frotz +feature" appears here, and again that is why it is important for the +contributor to explain her work well when creating the signed tag. + +As usual, the lines commented with `#` are stripped out. The resulting +commit records the signed tag used for this validation in a hidden field +so that it can later be used by others to audit the history. There is no +need for the integrator to keep a separate copy of the tag in his +repository (i.e. `git tag -l` won't list the `frotz-for-xyzzy` tag in the +above example), and there is no need to publish the tag to his public +repository, either. + +After the integrator responds to the pull request and her work becomes +part of the permanent history, the contributor can remove the tag from +her public repository, if she chooses, in order to keep the tag namespace +of her public repository clean, with: + +------------ + $ git push example.com:/git/froboz.git :frotz-for-xyzzy +------------ + + +Auditors +-------- + +The `--show-signature` option can be given to `git log` or `git show` and +shows the verification status of the embedded signed tag in merge commits +created when the integrator responded to a pull request of a signed tag. + +A typical output from `git show --show-signature` may look like this: + +------------ + $ git show --show-signature + commit 02306ef6a3498a39118aef9df7975bdb50091585 + merged tag 'frotz-for-xyzzy' + gpg: Signature made Fri 06 Jan 2012 12:41:49 PM PST using RSA key ID 96AFE6CB + gpg: Good signature from "Con Tributor <nitfol@example.com>" + Merge: 406da78 703f05a + Author: Inte Grator <xyzzy@example.com> + Date: Tue Jan 17 13:49:41 2012 -0800 + + Merge tag 'frotz-for-xyzzy' of example.com:/git/froboz.git/ + + Completed frotz feature + + * tag 'frotz-for-xyzzy' (100 commits) + Add tests and documentation for frotz + ... +------------ + +There is no need for the auditor to explicitly fetch the contributor's +signature, or to even be aware of what tag(s) the contributor and integrator +used to communicate the signature. All the required information is recorded +as part of the merge commit. diff --git a/Documentation/merge-options.txt b/Documentation/merge-options.txt index b613d4ed08..0bcbe0ac3c 100644 --- a/Documentation/merge-options.txt +++ b/Documentation/merge-options.txt @@ -7,14 +7,35 @@ With --no-commit perform the merge but pretend the merge failed and do not autocommit, to give the user a chance to inspect and further tweak the merge result before committing. +--edit:: +--no-edit:: + Invoke an editor before committing successful mechanical merge to + further edit the auto-generated merge message, so that the user + can explain and justify the merge. The `--no-edit` option can be + used to accept the auto-generated message (this is generally + discouraged). The `--edit` option is still useful if you are + giving a draft message with the `-m` option from the command line + and want to edit it in the editor. ++ +Older scripts may depend on the historical behaviour of not allowing the +user to edit the merge log message. They will see an editor opened when +they run `git merge`. To make it easier to adjust such scripts to the +updated behaviour, the environment variable `GIT_MERGE_AUTOEDIT` can be +set to `no` at the beginning of them. + --ff:: + When the merge resolves as a fast-forward, only update the branch + pointer, without creating a merge commit. This is the default + behavior. + --no-ff:: - Do not generate a merge commit if the merge resolved as - a fast-forward, only update the branch pointer. This is - the default behavior of git-merge. -+ -With --no-ff Generate a merge commit even if the merge -resolved as a fast-forward. + Create a merge commit even when the merge resolves as a + fast-forward. + +--ff-only:: + Refuse to merge and exit with a non-zero status unless the + current `HEAD` is already up-to-date or the merge can be + resolved as a fast-forward. --log[=<n>]:: --no-log:: @@ -49,11 +70,6 @@ merge. With --no-squash perform the merge and commit the result. This option can be used to override --squash. ---ff-only:: - Refuse to merge and exit with a non-zero status unless the - current `HEAD` is already up-to-date or the merge can be - resolved as a fast-forward. - -s <strategy>:: --strategy=<strategy>:: Use the given merge strategy; can be supplied more than diff --git a/Documentation/pretty-formats.txt b/Documentation/pretty-formats.txt index 561cc9f7d7..880b6f2e6f 100644 --- a/Documentation/pretty-formats.txt +++ b/Documentation/pretty-formats.txt @@ -132,6 +132,10 @@ The placeholders are: - '%N': commit notes - '%gD': reflog selector, e.g., `refs/stash@\{1\}` - '%gd': shortened reflog selector, e.g., `stash@\{1\}` +- '%gn': reflog identity name +- '%gN': reflog identity name (respecting .mailmap, see linkgit:git-shortlog[1] or linkgit:git-blame[1]) +- '%ge': reflog identity email +- '%gE': reflog identity email (respecting .mailmap, see linkgit:git-shortlog[1] or linkgit:git-blame[1]) - '%gs': reflog subject - '%Cred': switch color to red - '%Cgreen': switch color to green diff --git a/Documentation/rev-list-options.txt b/Documentation/rev-list-options.txt index 39e6207269..6a4b6355ba 100644 --- a/Documentation/rev-list-options.txt +++ b/Documentation/rev-list-options.txt @@ -117,27 +117,27 @@ parents) and `--max-parents=-1` (negative numbers denote no upper limit). Pretend as if all the refs in `refs/heads` are listed on the command line as '<commit>'. If '<pattern>' is given, limit branches to ones matching given shell glob. If pattern lacks '?', - '*', or '[', '/*' at the end is implied. + '{asterisk}', or '[', '/{asterisk}' at the end is implied. --tags[=<pattern>]:: Pretend as if all the refs in `refs/tags` are listed on the command line as '<commit>'. If '<pattern>' is given, limit - tags to ones matching given shell glob. If pattern lacks '?', '*', - or '[', '/*' at the end is implied. + tags to ones matching given shell glob. If pattern lacks '?', '{asterisk}', + or '[', '/{asterisk}' at the end is implied. --remotes[=<pattern>]:: Pretend as if all the refs in `refs/remotes` are listed on the command line as '<commit>'. If '<pattern>' is given, limit remote-tracking branches to ones matching given shell glob. - If pattern lacks '?', '*', or '[', '/*' at the end is implied. + If pattern lacks '?', '{asterisk}', or '[', '/{asterisk}' at the end is implied. --glob=<glob-pattern>:: Pretend as if all the refs matching shell glob '<glob-pattern>' are listed on the command line as '<commit>'. Leading 'refs/', - is automatically prepended if missing. If pattern lacks '?', '*', - or '[', '/*' at the end is implied. + is automatically prepended if missing. If pattern lacks '?', '{asterisk}', + or '[', '/{asterisk}' at the end is implied. --ignore-missing:: diff --git a/Documentation/revisions.txt b/Documentation/revisions.txt index b290b617d4..1725661837 100644 --- a/Documentation/revisions.txt +++ b/Documentation/revisions.txt @@ -101,7 +101,7 @@ the '$GIT_DIR/refs' directory or from the '$GIT_DIR/packed-refs' file. '<rev>{tilde}<n>', e.g. 'master{tilde}3':: A suffix '{tilde}<n>' to a revision parameter means the commit - object that is the <n>th generation grand-parent of the named + object that is the <n>th generation ancestor of the named commit object, following only the first parents. I.e. '<rev>{tilde}3' is equivalent to '<rev>{caret}{caret}{caret}' which is equivalent to '<rev>{caret}1{caret}1{caret}1'. See below for an illustration of diff --git a/Documentation/sequencer.txt b/Documentation/sequencer.txt new file mode 100644 index 0000000000..5747f442f2 --- /dev/null +++ b/Documentation/sequencer.txt @@ -0,0 +1,12 @@ +--continue:: + Continue the operation in progress using the information in + '.git/sequencer'. Can be used to continue after resolving + conflicts in a failed cherry-pick or revert. + +--quit:: + Forget about the current operation in progress. Can be used + to clear the sequencer state after a failed cherry-pick or + revert. + +--abort:: + Cancel the operation and return to the pre-sequence state. diff --git a/Documentation/technical/api-config.txt b/Documentation/technical/api-config.txt new file mode 100644 index 0000000000..edf8dfb99b --- /dev/null +++ b/Documentation/technical/api-config.txt @@ -0,0 +1,140 @@ +config API +========== + +The config API gives callers a way to access git configuration files +(and files which have the same syntax). See linkgit:git-config[1] for a +discussion of the config file syntax. + +General Usage +------------- + +Config files are parsed linearly, and each variable found is passed to a +caller-provided callback function. The callback function is responsible +for any actions to be taken on the config option, and is free to ignore +some options. It is not uncommon for the configuration to be parsed +several times during the run of a git program, with different callbacks +picking out different variables useful to themselves. + +A config callback function takes three parameters: + +- the name of the parsed variable. This is in canonical "flat" form: the + section, subsection, and variable segments will be separated by dots, + and the section and variable segments will be all lowercase. E.g., + `core.ignorecase`, `diff.SomeType.textconv`. + +- the value of the found variable, as a string. If the variable had no + value specified, the value will be NULL (typically this means it + should be interpreted as boolean true). + +- a void pointer passed in by the caller of the config API; this can + contain callback-specific data + +A config callback should return 0 for success, or -1 if the variable +could not be parsed properly. + +Basic Config Querying +--------------------- + +Most programs will simply want to look up variables in all config files +that git knows about, using the normal precedence rules. To do this, +call `git_config` with a callback function and void data pointer. + +`git_config` will read all config sources in order of increasing +priority. Thus a callback should typically overwrite previously-seen +entries with new ones (e.g., if both the user-wide `~/.gitconfig` and +repo-specific `.git/config` contain `color.ui`, the config machinery +will first feed the user-wide one to the callback, and then the +repo-specific one; by overwriting, the higher-priority repo-specific +value is left at the end). + +The `git_config_with_options` function lets the caller examine config +while adjusting some of the default behavior of `git_config`. It should +almost never be used by "regular" git code that is looking up +configuration variables. It is intended for advanced callers like +`git-config`, which are intentionally tweaking the normal config-lookup +process. It takes two extra parameters: + +`filename`:: +If this parameter is non-NULL, it specifies the name of a file to +parse for configuration, rather than looking in the usual files. Regular +`git_config` defaults to `NULL`. + +`respect_includes`:: +Specify whether include directives should be followed in parsed files. +Regular `git_config` defaults to `1`. + +There is a special version of `git_config` called `git_config_early`. +This version takes an additional parameter to specify the repository +config, instead of having it looked up via `git_path`. This is useful +early in a git program before the repository has been found. Unless +you're working with early setup code, you probably don't want to use +this. + +Reading Specific Files +---------------------- + +To read a specific file in git-config format, use +`git_config_from_file`. This takes the same callback and data parameters +as `git_config`. + +Value Parsing Helpers +--------------------- + +To aid in parsing string values, the config API provides callbacks with +a number of helper functions, including: + +`git_config_int`:: +Parse the string to an integer, including unit factors. Dies on error; +otherwise, returns the parsed result. + +`git_config_ulong`:: +Identical to `git_config_int`, but for unsigned longs. + +`git_config_bool`:: +Parse a string into a boolean value, respecting keywords like "true" and +"false". Integer values are converted into true/false values (when they +are non-zero or zero, respectively). Other values cause a die(). If +parsing is successful, the return value is the result. + +`git_config_bool_or_int`:: +Same as `git_config_bool`, except that integers are returned as-is, and +an `is_bool` flag is unset. + +`git_config_maybe_bool`:: +Same as `git_config_bool`, except that it returns -1 on error rather +than dying. + +`git_config_string`:: +Allocates and copies the value string into the `dest` parameter; if no +string is given, prints an error message and returns -1. + +`git_config_pathname`:: +Similar to `git_config_string`, but expands `~` or `~user` into the +user's home directory when found at the beginning of the path. + +Include Directives +------------------ + +By default, the config parser does not respect include directives. +However, a caller can use the special `git_config_include` wrapper +callback to support them. To do so, you simply wrap your "real" callback +function and data pointer in a `struct config_include_data`, and pass +the wrapper to the regular config-reading functions. For example: + +------------------------------------------- +int read_file_with_include(const char *file, config_fn_t fn, void *data) +{ + struct config_include_data inc = CONFIG_INCLUDE_INIT; + inc.fn = fn; + inc.data = data; + return git_config_from_file(git_config_include, file, &inc); +} +------------------------------------------- + +`git_config` respects includes automatically. The lower-level +`git_config_from_file` does not. + +Writing Config Files +-------------------- + +TODO diff --git a/Documentation/technical/api-credentials.txt b/Documentation/technical/api-credentials.txt new file mode 100644 index 0000000000..21ca6a2553 --- /dev/null +++ b/Documentation/technical/api-credentials.txt @@ -0,0 +1,245 @@ +credentials API +=============== + +The credentials API provides an abstracted way of gathering username and +password credentials from the user (even though credentials in the wider +world can take many forms, in this document the word "credential" always +refers to a username and password pair). + +Data Structures +--------------- + +`struct credential`:: + + This struct represents a single username/password combination + along with any associated context. All string fields should be + heap-allocated (or NULL if they are not known or not applicable). + The meaning of the individual context fields is the same as + their counterparts in the helper protocol; see the section below + for a description of each field. ++ +The `helpers` member of the struct is a `string_list` of helpers. Each +string specifies an external helper which will be run, in order, to +either acquire or store credentials. See the section on credential +helpers below. ++ +This struct should always be initialized with `CREDENTIAL_INIT` or +`credential_init`. + + +Functions +--------- + +`credential_init`:: + + Initialize a credential structure, setting all fields to empty. + +`credential_clear`:: + + Free any resources associated with the credential structure, + returning it to a pristine initialized state. + +`credential_fill`:: + + Instruct the credential subsystem to fill the username and + password fields of the passed credential struct by first + consulting helpers, then asking the user. After this function + returns, the username and password fields of the credential are + guaranteed to be non-NULL. If an error occurs, the function will + die(). + +`credential_reject`:: + + Inform the credential subsystem that the provided credentials + have been rejected. This will cause the credential subsystem to + notify any helpers of the rejection (which allows them, for + example, to purge the invalid credentials from storage). It + will also free() the username and password fields of the + credential and set them to NULL (readying the credential for + another call to `credential_fill`). Any errors from helpers are + ignored. + +`credential_approve`:: + + Inform the credential subsystem that the provided credentials + were successfully used for authentication. This will cause the + credential subsystem to notify any helpers of the approval, so + that they may store the result to be used again. Any errors + from helpers are ignored. + +`credential_from_url`:: + + Parse a URL into broken-down credential fields. + +Example +------- + +The example below shows how the functions of the credential API could be +used to login to a fictitious "foo" service on a remote host: + +----------------------------------------------------------------------- +int foo_login(struct foo_connection *f) +{ + int status; + /* + * Create a credential with some context; we don't yet know the + * username or password. + */ + + struct credential c = CREDENTIAL_INIT; + c.protocol = xstrdup("foo"); + c.host = xstrdup(f->hostname); + + /* + * Fill in the username and password fields by contacting + * helpers and/or asking the user. The function will die if it + * fails. + */ + credential_fill(&c); + + /* + * Otherwise, we have a username and password. Try to use it. + */ + status = send_foo_login(f, c.username, c.password); + switch (status) { + case FOO_OK: + /* It worked. Store the credential for later use. */ + credential_accept(&c); + break; + case FOO_BAD_LOGIN: + /* Erase the credential from storage so we don't try it + * again. */ + credential_reject(&c); + break; + default: + /* + * Some other error occured. We don't know if the + * credential is good or bad, so report nothing to the + * credential subsystem. + */ + } + + /* Free any associated resources. */ + credential_clear(&c); + + return status; +} +----------------------------------------------------------------------- + + +Credential Helpers +------------------ + +Credential helpers are programs executed by git to fetch or save +credentials from and to long-term storage (where "long-term" is simply +longer than a single git process; e.g., credentials may be stored +in-memory for a few minutes, or indefinitely on disk). + +Each helper is specified by a single string. The string is transformed +by git into a command to be executed using these rules: + + 1. If the helper string begins with "!", it is considered a shell + snippet, and everything after the "!" becomes the command. + + 2. Otherwise, if the helper string begins with an absolute path, the + verbatim helper string becomes the command. + + 3. Otherwise, the string "git credential-" is prepended to the helper + string, and the result becomes the command. + +The resulting command then has an "operation" argument appended to it +(see below for details), and the result is executed by the shell. + +Here are some example specifications: + +---------------------------------------------------- +# run "git credential-foo" +foo + +# same as above, but pass an argument to the helper +foo --bar=baz + +# the arguments are parsed by the shell, so use shell +# quoting if necessary +foo --bar="whitespace arg" + +# you can also use an absolute path, which will not use the git wrapper +/path/to/my/helper --with-arguments + +# or you can specify your own shell snippet +!f() { echo "password=`cat $HOME/.secret`"; }; f +---------------------------------------------------- + +Generally speaking, rule (3) above is the simplest for users to specify. +Authors of credential helpers should make an effort to assist their +users by naming their program "git-credential-$NAME", and putting it in +the $PATH or $GIT_EXEC_PATH during installation, which will allow a user +to enable it with `git config credential.helper $NAME`. + +When a helper is executed, it will have one "operation" argument +appended to its command line, which is one of: + +`get`:: + + Return a matching credential, if any exists. + +`store`:: + + Store the credential, if applicable to the helper. + +`erase`:: + + Remove a matching credential, if any, from the helper's storage. + +The details of the credential will be provided on the helper's stdin +stream. The credential is split into a set of named attributes. +Attributes are provided to the helper, one per line. Each attribute is +specified by a key-value pair, separated by an `=` (equals) sign, +followed by a newline. The key may contain any bytes except `=`, +newline, or NUL. The value may contain any bytes except newline or NUL. +In both cases, all bytes are treated as-is (i.e., there is no quoting, +and one cannot transmit a value with newline or NUL in it). The list of +attributes is terminated by a blank line or end-of-file. + +Git will send the following attributes (but may not send all of +them for a given credential; for example, a `host` attribute makes no +sense when dealing with a non-network protocol): + +`protocol`:: + + The protocol over which the credential will be used (e.g., + `https`). + +`host`:: + + The remote hostname for a network credential. + +`path`:: + + The path with which the credential will be used. E.g., for + accessing a remote https repository, this will be the + repository's path on the server. + +`username`:: + + The credential's username, if we already have one (e.g., from a + URL, from the user, or from a previously run helper). + +`password`:: + + The credential's password, if we are asking it to be stored. + +For a `get` operation, the helper should produce a list of attributes +on stdout in the same format. A helper is free to produce a subset, or +even no values at all if it has nothing useful to provide. Any provided +attributes will overwrite those already known about by git. + +For a `store` or `erase` operation, the helper's output is ignored. +If it fails to perform the requested operation, it may complain to +stderr to inform the user. If it does not support the requested +operation (e.g., a read-only store), it should silently ignore the +request. + +If a helper receives any other operation, it should silently ignore the +request. This leaves room for future operations to be added (older +helpers will just ignore the new requests). diff --git a/Documentation/technical/api-parse-options.txt b/Documentation/technical/api-parse-options.txt index f6a4a361bd..2527b7e8d7 100644 --- a/Documentation/technical/api-parse-options.txt +++ b/Documentation/technical/api-parse-options.txt @@ -39,7 +39,8 @@ The parse-options API allows: * Short options may be bundled, e.g. `-a -b` can be specified as `-ab`. * Boolean long options can be 'negated' (or 'unset') by prepending - `no-`, e.g. `\--no-abbrev` instead of `\--abbrev`. + `no-`, e.g. `\--no-abbrev` instead of `\--abbrev`. Conversely, + options that begin with `no-` can be 'negated' by removing it. * Options and non-option arguments can clearly be separated using the `\--` option, e.g. `-a -b \--option \-- \--this-is-a-file` indicates that @@ -135,9 +136,14 @@ There are some macros to easily define options: describes the group or an empty string. Start the description with an upper-case letter. -`OPT_BOOLEAN(short, long, &int_var, description)`:: - Introduce a boolean option. - `int_var` is incremented on each use. +`OPT_BOOL(short, long, &int_var, description)`:: + Introduce a boolean option. `int_var` is set to one with + `--option` and set to zero with `--no-option`. + +`OPT_COUNTUP(short, long, &int_var, description)`:: + Introduce a count-up option. + `int_var` is incremented on each use of `--option`, and + reset to zero with `--no-option`. `OPT_BIT(short, long, &int_var, description, mask)`:: Introduce a boolean option. @@ -148,8 +154,9 @@ There are some macros to easily define options: If used, `int_var` is bitwise-anded with the inverted `mask`. `OPT_SET_INT(short, long, &int_var, description, integer)`:: - Introduce a boolean option. - If used, set `int_var` to `integer`. + Introduce an integer option. + `int_var` is set to `integer` with `--option`, and + reset to zero with `--no-option`. `OPT_SET_PTR(short, long, &ptr_var, description, ptr)`:: Introduce a boolean option. @@ -198,6 +205,11 @@ There are some macros to easily define options: "auto", set `int_var` to 1 if stdout is a tty or a pager, 0 otherwise. +`OPT_NOOP_NOARG(short, long)`:: + Introduce an option that has no effect and takes no arguments. + Use it to hide deprecated options that are still to be recognized + and ignored silently. + The last element of the array must be `OPT_END()`. diff --git a/Documentation/technical/api-strbuf.txt b/Documentation/technical/api-strbuf.txt index afe2759951..95a8bf3846 100644 --- a/Documentation/technical/api-strbuf.txt +++ b/Documentation/technical/api-strbuf.txt @@ -255,8 +255,24 @@ same behaviour as well. `strbuf_getline`:: - Read a line from a FILE* pointer. The second argument specifies the line + Read a line from a FILE *, overwriting the existing contents + of the strbuf. The second argument specifies the line terminator character, typically `'\n'`. + Reading stops after the terminator or at EOF. The terminator + is removed from the buffer before returning. Returns 0 unless + there was nothing left before EOF, in which case it returns `EOF`. + +`strbuf_getwholeline`:: + + Like `strbuf_getline`, but keeps the trailing terminator (if + any) in the buffer. + +`strbuf_getwholeline_fd`:: + + Like `strbuf_getwholeline`, but operates on a file descriptor. + It reads one character at a time, so it is very slow. Do not + use it unless you need the correct position in the file + descriptor. `stripspace`:: diff --git a/Documentation/technical/api-string-list.txt b/Documentation/technical/api-string-list.txt index ce24eb96f5..5a0c14fceb 100644 --- a/Documentation/technical/api-string-list.txt +++ b/Documentation/technical/api-string-list.txt @@ -83,7 +83,9 @@ Functions Insert a new element to the string_list. The returned pointer can be handy if you want to write something to the `util` pointer of the - string_list_item containing the just added string. + string_list_item containing the just added string. If the given + string already exists the insertion will be skipped and the + pointer to the existing item returned. + Since this function uses xrealloc() (which die()s if it fails) if the list needs to grow, it is safe not to check the pointer. I.e. you may diff --git a/Documentation/technical/pack-protocol.txt b/Documentation/technical/pack-protocol.txt index a7004c63e7..546980c0a4 100644 --- a/Documentation/technical/pack-protocol.txt +++ b/Documentation/technical/pack-protocol.txt @@ -60,6 +60,13 @@ process on the server side over the Git protocol is this: "0039git-upload-pack /schacon/gitbook.git\0host=example.com\0" | nc -v example.com 9418 +If the server refuses the request for some reasons, it could abort +gracefully with an error message. + +---- + error-line = PKT-LINE("ERR" SP explanation-text) +---- + SSH Transport ------------- diff --git a/Documentation/user-manual.txt b/Documentation/user-manual.txt index f13a846131..6c7fee7ef7 100644 --- a/Documentation/user-manual.txt +++ b/Documentation/user-manual.txt @@ -1582,7 +1582,7 @@ Checking the repository for corruption The linkgit:git-fsck[1] command runs a number of self-consistency checks on the repository, and reports on any problems. This may take some -time. The most common warning by far is about "dangling" objects: +time. ------------------------------------------------- $ git fsck @@ -1597,9 +1597,11 @@ dangling tree b24c2473f1fd3d91352a624795be026d64c8841f ... ------------------------------------------------- -Dangling objects are not a problem. At worst they may take up a little -extra disk space. They can sometimes provide a last-resort method for -recovering lost work--see <<dangling-objects>> for details. +You will see informational messages on dangling objects. They are objects +that still exist in the repository but are no longer referenced by any of +your branches, and can (and will) be removed after a while with "gc". +You can run `git fsck --no-dangling` to supress these messages, and still +view real errors. [[recovering-lost-changes]] Recovering lost changes @@ -3295,15 +3297,12 @@ it is with linkgit:git-fsck[1]; this may be time-consuming. Assume the output looks like this: ------------------------------------------------ -$ git fsck --full +$ git fsck --full --no-dangling broken link from tree 2d9263c6d23595e7cb2a21e5ebbb53655278dff8 to blob 4b9458b3786228369c63936db65827de3cc06200 missing blob 4b9458b3786228369c63936db65827de3cc06200 ------------------------------------------------ -(Typically there will be some "dangling object" messages too, but they -aren't interesting.) - Now you know that blob 4b9458b3 is missing, and that the tree 2d9263c6 points to it. If you could find just one copy of that missing blob object, possibly in some other repository, you could move it into |