diff options
Diffstat (limited to 'Documentation')
38 files changed, 953 insertions, 163 deletions
diff --git a/Documentation/Makefile b/Documentation/Makefile index 5d76a84078..cf5916fe8b 100644 --- a/Documentation/Makefile +++ b/Documentation/Makefile @@ -66,12 +66,6 @@ endif -include ../config.mak # -# For asciidoc ... -# -7.1.2, set ASCIIDOC7 -# 8.0-, no extra settings are needed -# - -# # For docbook-xsl ... # -1.68.1, no extra settings are needed? # 1.69.0, set ASCIIDOC_ROFF? @@ -81,9 +75,6 @@ endif # 1.73.0-, no extra settings are needed # -ifndef ASCIIDOC7 -ASCIIDOC_EXTRA += -a asciidoc7compatible -endif ifdef DOCBOOK_XSL_172 ASCIIDOC_EXTRA += -a git-asciidoc-no-roff MANPAGE_XSL = manpage-1.72.xsl @@ -134,15 +125,6 @@ DEFAULT_EDITOR_SQ = $(subst ','\'',$(DEFAULT_EDITOR)) ASCIIDOC_EXTRA += -a 'git-default-editor=$(DEFAULT_EDITOR_SQ)' endif -# -# Please note that there is a minor bug in asciidoc. -# The version after 6.0.3 _will_ include the patch found here: -# http://marc.theaimsgroup.com/?l=git&m=111558757202243&w=2 -# -# Until that version is released you may have to apply the patch -# yourself - yes, all 6 characters of it! -# - QUIET_SUBDIR0 = +$(MAKE) -C # space to separate -C and subdir QUIET_SUBDIR1 = @@ -362,4 +344,7 @@ require-htmlrepo:: quick-install-html: require-htmlrepo '$(SHELL_PATH_SQ)' ./install-doc-quick.sh $(HTML_REPO) $(DESTDIR)$(htmldir) +print-man1: + @for i in $(MAN1_TXT); do echo $$i; done + .PHONY: FORCE diff --git a/Documentation/RelNotes/1.7.11.6.txt b/Documentation/RelNotes/1.7.11.6.txt index e548a59824..ba7d3c3966 100644 --- a/Documentation/RelNotes/1.7.11.6.txt +++ b/Documentation/RelNotes/1.7.11.6.txt @@ -4,31 +4,81 @@ Git v1.7.11.6 Release Notes Fixes since v1.7.11.5 --------------------- -This is primarily documentation and low-impact code clarification. - - - "ciabot" script (in contrib/) has been updated with extensive + * "ciabot" script (in contrib/) has been updated with extensive documentation. - - The "--rebase" option to "git pull" can be abbreviated to "-r", - but we didn't document it. + * "git foo" errored out with "Not a directory" when the user had a + non-directory on $PATH, and worse yet it masked an alias "foo" from + running. - - It was generally understood that "--long-option"s to many of our - subcommands can be abbreviated to the unique prefix, but it was not - easy to find it described for new readers of the documentation set. + * When the user exports a non-default IFS without HT, scripts that + rely on being able to parse "ls-files -s | while read a b c..." + started to fail. Protect them from such a misconfiguration. - - The "--topo-order", "--date-order" (and the lack of either means - the default order) options to "rev-list" and "log" family of - commands were poorly described in the documentation. + * When the user gives an argument that can be taken as both a + revision name and a pathname without disambiguating with "--", we + used to give a help message "Use '--' to separate". The message + has been clarified to show where that '--' goes on the command + line. + + * Documentation for the configuration file format had a confusing + example. - - Older parts of the documentation described as if having a regular + * Older parts of the documentation described as if having a regular file in .git/refs/ hierarchy were the only way to have branches and tags, which is not true for quite some time. - - A utility shell function test_seq has been added as a replacement - for the 'seq' utility found on some platforms. + * It was generally understood that "--long-option"s to many of our + subcommands can be abbreviated to the unique prefix, but it was not + easy to find it described for new readers of the documentation set. - - Fallback 'getpass' implementation made unportable use of stdio API. + * The "--topo-order", "--date-order" (and the lack of either means + the default order) options to "rev-list" and "log" family of + commands were poorly described in the documentation. - - "git commit --amend" let the user edit the log message and then + * "git commit --amend" let the user edit the log message and then died when the human-readable committer name was given insufficiently by getpwent(3). + + * The exit status code from "git config" was way overspecified while + being incorrect. The implementation has been updated to give the + documented status for a case that was documented, and introduce a + new code for "all other errors". + + * The output from "git diff -B" for a file that ends with an + incomplete line did not put "\ No newline..." on a line of its own. + + * "git diff" had a confusion between taking data from a path in the + working tree and taking data from an object that happens to have + name 0{40} recorded in a tree. + + * The "--rebase" option to "git pull" can be abbreviated to "-r", + but we didn't document it. + + * When "git push" triggered the automatic gc on the receiving end, a + message from "git prune" that said it was removing cruft leaked to + the standard output, breaking the communication protocol. + + * The reflog entries left by "git rebase" and "git rebase -i" were + inconsistent (the interactive one gave an abbreviated object name). + + * "git send-email" did not unquote encoded words that appear on the + header correctly, and lost "_" from strings. + + * "git stash apply/pop" did not trigger "rerere" upon conflicts + unlike other mergy operations. + + * "git submodule <cmd> path" did not error out when the path to the + submodule was misspelt. + + * "git submodule update -f" did not update paths in the working tree + that has local changes. + (merge 01d4721 sz/submodule-force-update later to maint). + + * "gitweb" when used with PATH_INFO failed to notice directories with + SP (and other characters that need URL-style quoting) in them. + + * Fallback 'getpass' implementation made unportable use of stdio API. + + * A utility shell function test_seq has been added as a replacement + for the 'seq' utility found on some platforms. diff --git a/Documentation/RelNotes/1.7.12.1.txt b/Documentation/RelNotes/1.7.12.1.txt new file mode 100644 index 0000000000..4088a166f5 --- /dev/null +++ b/Documentation/RelNotes/1.7.12.1.txt @@ -0,0 +1,101 @@ +Git 1.7.12.1 Release Notes +========================== + +Fixes since v1.7.12 +------------------- + + * "ciabot" script (in contrib/) has been updated with extensive + documentation. + + * The "--rebase" option to "git pull" can be abbreviated to "-r", + but we didn't document it. + + * It was generally understood that "--long-option"s to many of our + subcommands can be abbreviated to the unique prefix, but it was not + easy to find it described for new readers of the documentation set. + + * The synopsis said "checkout [-B branch]" to make it clear the + branch name is a parameter to the option, but the heading for the + option description was "-B::", not "-B branch::", making the + documentation misleading. + + * The "--topo-order", "--date-order" (and the lack of either means + the default order) options to "rev-list" and "log" family of + commands were poorly described in the documentation. + + * Older parts of the documentation described as if having a regular + file in .git/refs/ hierarchy were the only way to have branches and + tags, which is not true for quite some time. + + * A utility shell function test_seq has been added as a replacement + for the 'seq' utility found on some platforms. + + * Compatibility wrapper to learn the maximum number of file + descriptors we can open around sysconf(_SC_OPEN_MAX) and + getrlimit(RLIMIT_NO_FILE) has been introduced for portability. + + * We used curl_easy_strerror() without checking version of cURL, + breaking the build for versions before curl 7.12.0. + + * Code to work around MacOS X UTF-8 gotcha has been cleaned up. + + * Fallback 'getpass' implementation made unportable use of stdio API. + + * "git apply -p0" did not parse pathnames on "diff --git" line + correctly. This caused patches that had pathnames in no other + places to be mistakenly rejected (most notably, binary patch that + does not rename nor change mode). Textual patches, renames or mode + changes have preimage and postimage pathnames in different places + in a form that can be parsed unambiguously and did not suffer from + this problem. + + * "git commit --amend" let the user edit the log message and then + died when the human-readable committer name was given + insufficiently by getpwent(3). + + * Some capabilities were asked by fetch-pack even when upload-pack + did not advertise that they are available. fetch-pack has been + fixed not to do so. + + * "git for-each-ref" did not currectly support more than one --sort + option. + + * "git log .." errored out saying it is both rev range and a path + when there is no disambiguating "--" is on the command line. + Update the command line parser to interpret ".." as a path in such + a case. + + * "git prune" without "-v" used to warn about leftover temporary + files (which is an indication of an earlier aborted operation). + + * Pushing to smart HTTP server with recent Git fails without having + the username in the URL to force authentication, if the server is + configured to allow GET anonymously, while requiring authentication + for POST. + + * The reflog entries left by "git rebase" and "git rebase -i" were + inconsistent (the interactive one gave an abbreviated object name). + + * When the user exports a non-default IFS without HT, scripts that + rely on being able to parse "ls-files -s | while read a b c..." + started to fail. Protect them from such a misconfiguration. + + * When "git push" triggered the automatic gc on the receiving end, a + message from "git prune" that said it was removing cruft leaked to + the standard output, breaking the communication protocol. + + * "git diff" had a confusion between taking data from a path in the + working tree and taking data from an object that happens to have + name 0{40} recorded in a tree. + + * "git send-email" did not unquote encoded words that appear on the + header correctly, and lost "_" from strings. + + * When the user gives an argument that can be taken as both a + revision name and a pathname without disambiguating with "--", we + used to give a help message "Use '--' to separate". The message + has been clarified to show where that '--' goes on the command + line. + + * "gitweb" when used with PATH_INFO failed to notice directories with + SP (and other characters that need URL-style quoting) in them. diff --git a/Documentation/RelNotes/1.7.12.txt b/Documentation/RelNotes/1.7.12.txt new file mode 100644 index 0000000000..010d8c7de4 --- /dev/null +++ b/Documentation/RelNotes/1.7.12.txt @@ -0,0 +1,136 @@ +Git v1.7.12 Release Notes +========================= + +Updates since v1.7.11 +--------------------- + +UI, Workflows & Features + + * Git can be told to normalize pathnames it read from readdir(3) and + all arguments it got from the command line into precomposed UTF-8 + (assuming that they come as decomposed UTF-8), in order to work + around issues on Mac OS. + + I think there still are other places that need conversion + (e.g. paths that are read from stdin for some commands), but this + should be a good first step in the right direction. + + * Per-user $HOME/.gitconfig file can optionally be stored in + $HOME/.config/git/config instead, which is in line with XDG. + + * The value of core.attributesfile and core.excludesfile default to + $HOME/.config/git/attributes and $HOME/.config/git/ignore respectively + when these files exist. + + * Logic to disambiguate abbreviated object names have been taught to + take advantage of object types that are expected in the context, + e.g. XXXXXX in the "git describe" output v1.2.3-gXXXXXX must be a + commit object, not a blob nor a tree. This will help us prolong + the lifetime of abbreviated object names. + + * "git apply" learned to wiggle the base version and perform three-way + merge when a patch does not exactly apply to the version you have. + + * Scripted Porcelain writers now have access to the credential API via + the "git credential" plumbing command. + + * "git help" used to always default to "man" format even on platforms + where "man" viewer is not widely available. + + * "git clone --local $path" started its life as an experiment to + optionally use link/copy when cloning a repository on the disk, but + we didn't deprecate it after we made the option a no-op to always + use the optimization. The command learned "--no-local" option to + turn this off, as a more explicit alternative over use of file:// + URL. + + * "git fetch" and friends used to say "remote side hung up + unexpectedly" when they failed to get response they expect from the + other side, but one common reason why they don't get expected + response is that the remote repository does not exist or cannot be + read. The error message in this case was updated to give better + hints to the user. + + * "git help -w $cmd" can show HTML version of documentation for + "git-$cmd" by setting help.htmlpath to somewhere other than the + default location where the build procedure installs them locally; + the variable can even point at a http:// URL. + + * "git rebase [-i] --root $tip" can now be used to rewrite all the + history leading to "$tip" down to the root commit. + + * "git rebase -i" learned "-x <cmd>" to insert "exec <cmd>" after + each commit in the resulting history. + + * "git status" gives finer classification to various states of paths + in conflicted state and offer advice messages in its output. + + * "git submodule" learned to deal with nested submodule structure + where a module is contained within a module whose origin is + specified as a relative URL to its superproject's origin. + + * A rather heavy-ish "git completion" script has been split to create + a separate "git prompting" script, to help lazy-autoloading of the + completion part while making prompting part always available. + + * "gitweb" pays attention to various forms of credits that are + similar to "Signed-off-by:" lines in the commit objects and + highlights them accordingly. + + +Foreign Interface + + * "mediawiki" remote helper (in contrib/) learned to handle file + attachments. + + * "git p4" now uses "Jobs:" and "p4 move" when appropriate. + + * vcs-svn has been updated to clean-up compilation, lift 32-bit + limitations, etc. + + +Performance, Internal Implementation, etc. (please report possible regressions) + + * Some tests showed false failures caused by a bug in ecryptofs. + + * We no longer use AsciiDoc7 syntax in our documentation and favor a + more modern style. + + * "git am --rebasing" codepath was taught to grab authorship, log + message and the patch text directly out of existing commits. This + will help rebasing commits that have confusing "diff" output in + their log messages. + + * "git index-pack" and "git pack-objects" use streaming API to read + from the object store to avoid having to hold a large blob object + in-core while they are doing their thing. + + * Code to match paths with exclude patterns learned to avoid calling + fnmatch() by comparing fixed leading substring literally when + possible. + + * "git log -n 1 -- rarely-touched-path" was spending unnecessary + cycles after showing the first change to find the next one, only to + discard it. + + * "git svn" got a large-looking code reorganization at the last + minute before the code freeze. + + +Also contains minor documentation updates and code clean-ups. + + +Fixes since v1.7.11 +------------------- + +Unless otherwise noted, all the fixes since v1.7.11 in the maintenance +releases are contained in this release (see release notes to them for +details). + + * "git submodule add" was confused when the superproject did not have + its repository in its usual place in the working tree and GIT_DIR + and GIT_WORK_TREE was used to access it. + + * "git commit --amend" let the user edit the log message and then died + when the human-readable committer name was given insufficiently by + getpwent(3). diff --git a/Documentation/RelNotes/1.8.0.txt b/Documentation/RelNotes/1.8.0.txt new file mode 100644 index 0000000000..2a8adca2a8 --- /dev/null +++ b/Documentation/RelNotes/1.8.0.txt @@ -0,0 +1,150 @@ +Git v1.8.0 Release Notes +======================== + +Backward compatibility notes +---------------------------- + +In the next major release, we will change the behaviour of the "git +push" command. When "git push [$there]" does not say what to push, we +have used the traditional "matching" semantics (all your branches were +sent to the remote as long as there already are branches of the same +name over there). We will use the "simple" semantics, that pushes the +current branch to the branch with the same name only when the current +branch is set to integrate with that remote branch. There is a user +preference configuration variable "push.default" to change this, and +"git push" will warn about the upcoming change until you set this +variable. + +"git branch --set-upstream" is deprecated and may be removed in a +relatively distant future. "git branch [-u|--set-upstream-to]" has +been introduced with a saner order of arguments. + + +Updates since v1.7.12 +--------------------- + +UI, Workflows & Features + + * A credential helper for Win32 to allow access to the keychain of + the logged-in user has been added. + + * A credential helper to allow access to the Gnome keyring has been + added. + + * It was tempting to say "git branch --set-upstream origin/master", + but that tells Git to arrange the local branch "origin/master" to + integrate with the currently checked out branch, which is highly + unlikely what the user meant. The option is deprecated; use the + new "--set-upstream-to" (with a short-and-sweet "-u") option + instead. + + * "git cherry-pick" learned the "--allow-empty-message" option to + allow it to replay a commit without any log message. + + * "git daemon" learned the "--access-hook" option to allow an + external command to decline service based on the client address, + repository path, etc. + + * "git difftool --dir-diff" learned to use symbolic links to prepare + temporary copy of the working tree when available. + + * "git grep" learned to use a non-standard pattern type by default if + a configuration variable tells it to. + + * "git merge-base" learned "--is-ancestor A B" option to tell if A is + an ancestor of B. The result is indicated by its exit status code. + + +Foreign Interface + + * "git svn" has been updated to work with SVN 1.7. + + +Performance, Internal Implementation, etc. (please report possible regressions) + + * Git ships with a fall-back regexp implementation for platforms with + buggy regexp library, but it was easy for people to keep using their + platform regexp. A new test has been added to check this. + + * The "check-docs" build target has been updated and greatly + simplified. + + * The documentation in the TeXinfo format was using indented output + for materials meant to be examples that are better typeset in + monospace. + + * Compatibility wrapper around some mkdir(2) implementations that + reject parameter with trailing slash has been introduced. + + * Compatibility wrapper for systems that lack usable setitimer() has + been added. + + * Many internal uses of "git merge-base" equivalent were only to see + if one commit fast-forwards to the other, which did not need the + full set of merge bases to be computed. They have been updated to + use less expensive checks. + + * The heuristics to detect and silently convert latin1 to utf8 when + we were told to use utf-8 in the log message has been transplanted + from "mailinfo" to "commit" and "commit-tree". + + * Messages given by "git <subcommand> -h" from many subcommands have + been marked for translation. + + +Also contains minor documentation updates and code clean-ups. + + +Fixes since v1.7.12 +------------------- + +Unless otherwise noted, all the fixes since v1.7.12 in the +maintenance track are contained in this release (see release notes +to them for details). + + * The subcommand in "git remote" to remove a defined remote was + "rm" and the command did not take a fully-spelled "remove". + (merge e17dba8 nd/maint-remote-remove later to maint). + + * After "gitk" showed the contents of a tag, neither "Reread + references" nor "Reload" did not update what is shown as the + contents of it, when the user overwrote the tag with "git tag -f". + + * "git cvsimport" did not thoroughly cleanse tag names that it + inferred from the names of the tags it obtained from CVS, which + caused "git tag" to barf and stop the import in the middle. + + * "git show --format='%ci'" did not give timestamp correctly for + commits created without human readable name on "committer" line. + (merge e27ddb6 jc/maint-ident-missing-human-name later to maint). + + * "git cherry-pick A C B" used to replay changes in A and then B and + then C if these three commits had committer timestamps in that + order, which is not what the user who said "A C B" naturally + expects. + (merge a73e22e mz/cherry-pick-cmdline-order later to maint). + + * "git show --quiet" ought to be a synonym for "git show -s", but + wasn't. + (merge f9c75d8 jk/maint-quiet-is-synonym-to-s-in-log later to maint). + + * "git p4", when "--use-client-spec" and "--detect-branches" are used + together, misdetected branches. + (merge 21ef5df pw/p4-use-client-spec-branch-detection later to maint). + + * Output from "git branch -v" contains "(no branch)" that could be + localized, but the code to align it along with the names of + branches were counting in bytes, not in display columns. + (merge 1452bd6 nd/branch-v-alignment later to maint). + + * When looking for $HOME/.gitconfig etc., it is OK if we cannot read + them because they do not exist, but we did not diagnose existing + files that we cannot read. + + * The interactive prompt "git send-email" gives was error prone. It + asked "What e-mail address do you want to use?" with the address it + guessed (correctly) the user would want to use in its prompt, + tempting the user to say "y". But the response was taken as "No, + please use 'y' as the e-mail address instead", which is most + certainly not what the user meant. + (merge 6183749 sb/send-email-reconfirm-fix later to maint). diff --git a/Documentation/asciidoc.conf b/Documentation/asciidoc.conf index a26d245ab4..1273a85c8a 100644 --- a/Documentation/asciidoc.conf +++ b/Documentation/asciidoc.conf @@ -36,7 +36,7 @@ ifndef::git-asciidoc-no-roff[] # v1.72 breaks with this because it replaces dots not in roff requests. [listingblock] <example><title>{title}</title> -<literallayout> +<literallayout class="monospaced"> ifdef::doctype-manpage[] .ft C endif::doctype-manpage[] @@ -53,7 +53,7 @@ ifdef::doctype-manpage[] # The following two small workarounds insert a simple paragraph after screen [listingblock] <example><title>{title}</title> -<literallayout> +<literallayout class="monospaced"> | </literallayout><simpara></simpara> {title#}</example> diff --git a/Documentation/config.txt b/Documentation/config.txt index b49feb582e..6416cae511 100644 --- a/Documentation/config.txt +++ b/Documentation/config.txt @@ -159,9 +159,10 @@ advice.*:: specified a refspec that isn't your current branch) and it resulted in a non-fast-forward error. statusHints:: - Directions on how to stage/unstage/add shown in the - output of linkgit:git-status[1] and the template shown - when writing commit messages. + Show directions on how to proceed from the current + state in the output of linkgit:git-status[1] and in + the template shown when writing commit messages in + linkgit:git-commit[1]. commitBeforeMerge:: Advice shown when linkgit:git-merge[1] refuses to merge to avoid overwriting local changes. @@ -213,6 +214,15 @@ The default is false, except linkgit:git-clone[1] or linkgit:git-init[1] will probe and set core.ignorecase true if appropriate when the repository is created. +core.precomposeunicode:: + This option is only used by Mac OS implementation of git. + When core.precomposeunicode=true, git reverts the unicode decomposition + of filenames done by Mac OS. This is useful when sharing a repository + between Mac OS and Linux or Windows. + (Git for Windows 1.7.10 or higher is needed, or git under cygwin 1.7). + When false, file names are handled fully transparent by git, + which is backward compatible with older versions of git. + core.trustctime:: If false, the ctime differences between the index and the working tree are ignored; useful when the inode change time @@ -486,7 +496,9 @@ core.excludesfile:: '.git/info/exclude', git looks into this file for patterns of files which are not meant to be tracked. "`~/`" is expanded to the value of `$HOME` and "`~user/`" to the specified user's - home directory. See linkgit:gitignore[5]. + home directory. Its default value is $XDG_CONFIG_HOME/git/ignore. + If $XDG_CONFIG_HOME is either not set or empty, $HOME/.config/git/ignore + is used instead. See linkgit:gitignore[5]. core.askpass:: Some commands (e.g. svn and http interfaces) that interactively @@ -501,7 +513,9 @@ core.attributesfile:: In addition to '.gitattributes' (per-directory) and '.git/info/attributes', git looks into this file for attributes (see linkgit:gitattributes[5]). Path expansions are made the same - way as for `core.excludesfile`. + way as for `core.excludesfile`. Its default value is + $XDG_CONFIG_HOME/git/attributes. If $XDG_CONFIG_HOME is either not + set or empty, $HOME/.config/git/attributes is used instead. core.editor:: Commands such as `commit` and `tag` that lets you edit @@ -883,7 +897,7 @@ column.ui:: make equal size columns -- + - This option defaults to 'never'. +This option defaults to 'never'. column.branch:: Specify whether to output branch listing in `git branch` in columns. @@ -1196,8 +1210,16 @@ gitweb.snapshot:: grep.lineNumber:: If set to true, enable '-n' option by default. +grep.patternType:: + Set the default matching behavior. Using a value of 'basic', 'extended', + 'fixed', or 'perl' will enable the '--basic-regexp', '--extended-regexp', + '--fixed-strings', or '--perl-regexp' option accordingly, while the + value 'default' will return to the default matching behavior. + grep.extendedRegexp:: - If set to true, enable '--extended-regexp' option by default. + If set to true, enable '--extended-regexp' option by default. This + option is ignored when the 'grep.patternType' option is set to a value + other than 'default'. gpg.program:: Use this custom program instead of "gpg" found on $PATH when @@ -1723,6 +1745,7 @@ push.default:: no refspec is implied by any of the options given on the command line. Possible values are: + +-- * `nothing` - do not push anything. * `matching` - push all branches having the same name in both ends. This is for those who prepare all the branches into a publishable @@ -1742,12 +1765,13 @@ push.default:: option and is well-suited for beginners. It will become the default in Git 2.0. * `current` - push the current branch to a branch of the same name. - + - The `simple`, `current` and `upstream` modes are for those who want to - push out a single branch after finishing work, even when the other - branches are not yet ready to be pushed out. If you are working with - other people to push into the same shared repository, you would want - to use one of these. +-- ++ +The `simple`, `current` and `upstream` modes are for those who want to +push out a single branch after finishing work, even when the other +branches are not yet ready to be pushed out. If you are working with +other people to push into the same shared repository, you would want +to use one of these. rebase.stat:: Whether to show a diffstat of what changed upstream since the last diff --git a/Documentation/git-apply.txt b/Documentation/git-apply.txt index afd2c9ae59..634b84e4b9 100644 --- a/Documentation/git-apply.txt +++ b/Documentation/git-apply.txt @@ -9,7 +9,7 @@ git-apply - Apply a patch to files and/or to the index SYNOPSIS -------- [verse] -'git apply' [--stat] [--numstat] [--summary] [--check] [--index] +'git apply' [--stat] [--numstat] [--summary] [--check] [--index] [--3way] [--apply] [--no-add] [--build-fake-ancestor=<file>] [-R | --reverse] [--allow-binary-replacement | --binary] [--reject] [-z] [-p<n>] [-C<n>] [--inaccurate-eof] [--recount] [--cached] @@ -72,6 +72,15 @@ OPTIONS cached data, apply the patch, and store the result in the index without using the working tree. This implies `--index`. +-3:: +--3way:: + When the patch does not apply cleanly, fall back on 3-way merge if + the patch records the identity of blobs it is supposed to apply to, + and we have those blobs available locally, possibly leaving the + conflict markers in the files in the working tree for the user to + resolve. This option implies the `--index` option, and is incompatible + with the `--reject` and the `--cached` options. + --build-fake-ancestor=<file>:: Newer 'git diff' output has embedded 'index information' for each blob to help identify the original version that diff --git a/Documentation/git-branch.txt b/Documentation/git-branch.txt index 47235bea04..9c1d2f1781 100644 --- a/Documentation/git-branch.txt +++ b/Documentation/git-branch.txt @@ -13,6 +13,8 @@ SYNOPSIS [--column[=<options>] | --no-column] [(--merged | --no-merged | --contains) [<commit>]] [<pattern>...] 'git branch' [--set-upstream | --track | --no-track] [-l] [-f] <branchname> [<start-point>] +'git branch' (--set-upstream-to=<upstream> | -u <upstream>) [<branchname>] +'git branch' --unset-upstream [<branchname>] 'git branch' (-m | -M) [<oldbranch>] <newbranch> 'git branch' (-d | -D) [-r] <branchname>... 'git branch' --edit-description [<branchname>] @@ -48,7 +50,7 @@ branch so that 'git pull' will appropriately merge from the remote-tracking branch. This behavior may be changed via the global `branch.autosetupmerge` configuration flag. That setting can be overridden by using the `--track` and `--no-track` options, and -changed later using `git branch --set-upstream`. +changed later using `git branch --set-upstream-to`. With a `-m` or `-M` option, <oldbranch> will be renamed to <newbranch>. If <oldbranch> had a corresponding reflog, it is renamed to match @@ -173,6 +175,16 @@ start-point is either a local or remote-tracking branch. like `--track` would when creating the branch, except that where branch points to is not changed. +-u <upstream>:: +--set-upstream-to=<upstream>:: + Set up <branchname>'s tracking information so <upstream> is + considered <branchname>'s upstream branch. If no <branchname> + is specified, then it defaults to the current branch. + +--unset-upstream:: + Remove the upstream information for <branchname>. If no branch + is specified it defaults to the current branch. + --edit-description:: Open an editor and edit the text to explain what the branch is for, to be used by various other commands (e.g. `request-pull`). diff --git a/Documentation/git-checkout.txt b/Documentation/git-checkout.txt index 63a251612a..7958a47006 100644 --- a/Documentation/git-checkout.txt +++ b/Documentation/git-checkout.txt @@ -84,11 +84,11 @@ entries; instead, unmerged entries are ignored. When checking out paths from the index, check out stage #2 ('ours') or #3 ('theirs') for unmerged paths. --b:: +-b <new_branch>:: Create a new branch named <new_branch> and start it at <start_point>; see linkgit:git-branch[1] for details. --B:: +-B <new_branch>:: Creates the branch <new_branch> and start it at <start_point>; if it already exists, then reset it to <start_point>. This is equivalent to running "git branch" with "-f"; see @@ -124,7 +124,7 @@ explicitly give a name with '-b' in such a case. <commit> is not a branch name. See the "DETACHED HEAD" section below for details. ---orphan:: +--orphan <new_branch>:: Create a new 'orphan' branch, named <new_branch>, started from <start_point> and switch to it. The first commit made on this new branch will have no parents and it will be the root of a new @@ -367,6 +367,18 @@ $ git checkout hello.c <3> <2> take a file out of another commit <3> restore hello.c from the index + +If you want to check out _all_ C source files out of the index, +you can say ++ +------------ +$ git checkout -- '*.c' +------------ ++ +Note the quotes around `*.c`. The file `hello.c` will also be +checked out, even though it is no longer in the working tree, +because the file globbing is used to match entries in the index +(not in the working tree by the shell). ++ If you have an unfortunate branch that is named `hello.c`, this step would be confused as an instruction to switch to that branch. You should instead write: diff --git a/Documentation/git-cherry-pick.txt b/Documentation/git-cherry-pick.txt index 0e170a51ca..c205d2363e 100644 --- a/Documentation/git-cherry-pick.txt +++ b/Documentation/git-cherry-pick.txt @@ -118,6 +118,11 @@ effect to your index in a row. previous commit are dropped. To force the inclusion of those commits use `--keep-redundant-commits`. +--allow-empty-message:: + By default, cherry-picking a commit with an empty message will fail. + This option overrides that behaviour, allowing commits with empty + messages to be cherry picked. + --keep-redundant-commits:: If a commit being cherry picked duplicates a commit already in the current history, it will become empty. By default these diff --git a/Documentation/git-clone.txt b/Documentation/git-clone.txt index 6e22522c4f..c1ddd4c2cc 100644 --- a/Documentation/git-clone.txt +++ b/Documentation/git-clone.txt @@ -46,13 +46,18 @@ OPTIONS mechanism and clones the repository by making a copy of HEAD and everything under objects and refs directories. The files under `.git/objects/` directory are hardlinked - to save space when possible. This is now the default when - the source repository is specified with `/path/to/repo` - syntax, so it essentially is a no-op option. To force - copying instead of hardlinking (which may be desirable - if you are trying to make a back-up of your repository), - but still avoid the usual "git aware" transport - mechanism, `--no-hardlinks` can be used. + to save space when possible. ++ +If the repository is specified as a local path (e.g., `/path/to/repo`), +this is the default, and --local is essentially a no-op. If the +repository is specified as a URL, then this flag is ignored (and we +never use the local optimizations). Specifying `--no-local` will +override the default when `/path/to/repo` is given, using the regular +git transport instead. ++ +To force copying instead of hardlinking (which may be desirable if you +are trying to make a back-up of your repository), but still avoid the +usual "git aware" transport mechanism, `--no-hardlinks` can be used. --no-hardlinks:: Optimize the cloning process from a repository on a diff --git a/Documentation/git-config.txt b/Documentation/git-config.txt index d9463cb387..eaea079165 100644 --- a/Documentation/git-config.txt +++ b/Documentation/git-config.txt @@ -54,16 +54,16 @@ configuration file by default, and options '--system', '--global', '--file <filename>' can be used to tell the command to write to that location (you can say '--local' but that is the default). -This command will fail (with exit code ret) if: +This command will fail with non-zero status upon error. Some exit +codes are: . The config file is invalid (ret=3), . can not write to the config file (ret=4), . no section or name was provided (ret=2), . the section or key is invalid (ret=1), . you try to unset an option which does not exist (ret=5), -. you try to unset/set an option for which multiple lines match (ret=5), -. you try to use an invalid regexp (ret=6), or -. you use '--global' option without $HOME being properly set (ret=128). +. you try to unset/set an option for which multiple lines match (ret=5), or +. you try to use an invalid regexp (ret=6). On success, the command returns the exit code 0. @@ -97,10 +97,11 @@ OPTIONS --global:: For writing options: write to global ~/.gitconfig file rather than - the repository .git/config. + the repository .git/config, write to $XDG_CONFIG_HOME/git/config file + if this file exists and the ~/.gitconfig file doesn't. + -For reading options: read only from global ~/.gitconfig rather than -from all available files. +For reading options: read only from global ~/.gitconfig and from +$XDG_CONFIG_HOME/git/config rather than from all available files. + See also <<FILES>>. @@ -194,7 +195,7 @@ See also <<FILES>>. FILES ----- -If not set explicitly with '--file', there are three files where +If not set explicitly with '--file', there are four files where 'git config' will search for configuration options: $GIT_DIR/config:: @@ -204,6 +205,14 @@ $GIT_DIR/config:: User-specific configuration file. Also called "global" configuration file. +$XDG_CONFIG_HOME/git/config:: + Second user-specific configuration file. If $XDG_CONFIG_HOME is not set + or empty, $HOME/.config/git/config will be used. Any single-valued + variable set in this file will be overwritten by whatever is in + ~/.gitconfig. It is a good idea not to create this file if + you sometimes use older versions of Git, as support for this + file was added fairly recently. + $(prefix)/etc/gitconfig:: System-wide configuration file. @@ -258,7 +267,7 @@ Given a .git/config like this: ; Proxy settings [core] - gitproxy="proxy-command" for kernel.org + gitproxy=proxy-command for kernel.org gitproxy=default-proxy ; for all the rest you can set the filemode to true with @@ -333,7 +342,7 @@ To actually match only values with an exclamation mark, you have to To add a new proxy, without altering any of the existing ones, use ------------ -% git config core.gitproxy '"proxy-command" for example.com' +% git config --add core.gitproxy '"proxy-command" for example.com' ------------ An example to use customized color from the configuration in your diff --git a/Documentation/git-credential-cache--daemon.txt b/Documentation/git-credential-cache--daemon.txt index 11edc5a173..d15db42d43 100644 --- a/Documentation/git-credential-cache--daemon.txt +++ b/Documentation/git-credential-cache--daemon.txt @@ -3,7 +3,7 @@ git-credential-cache--daemon(1) NAME ---- -git-credential-cache--daemon - temporarily store user credentials in memory +git-credential-cache--daemon - Temporarily store user credentials in memory SYNOPSIS -------- diff --git a/Documentation/git-credential-cache.txt b/Documentation/git-credential-cache.txt index f3d09c5d51..eeff5fa989 100644 --- a/Documentation/git-credential-cache.txt +++ b/Documentation/git-credential-cache.txt @@ -3,7 +3,7 @@ git-credential-cache(1) NAME ---- -git-credential-cache - helper to temporarily store passwords in memory +git-credential-cache - Helper to temporarily store passwords in memory SYNOPSIS -------- diff --git a/Documentation/git-credential-store.txt b/Documentation/git-credential-store.txt index 31093467d1..b27c03c361 100644 --- a/Documentation/git-credential-store.txt +++ b/Documentation/git-credential-store.txt @@ -3,7 +3,7 @@ git-credential-store(1) NAME ---- -git-credential-store - helper to store credentials on disk +git-credential-store - Helper to store credentials on disk SYNOPSIS -------- diff --git a/Documentation/git-credential.txt b/Documentation/git-credential.txt new file mode 100644 index 0000000000..810e957124 --- /dev/null +++ b/Documentation/git-credential.txt @@ -0,0 +1,154 @@ +git-credential(1) +================= + +NAME +---- +git-credential - Retrieve and store user credentials + +SYNOPSIS +-------- +------------------ +git credential <fill|approve|reject> +------------------ + +DESCRIPTION +----------- + +Git has an internal interface for storing and retrieving credentials +from system-specific helpers, as well as prompting the user for +usernames and passwords. The git-credential command exposes this +interface to scripts which may want to retrieve, store, or prompt for +credentials in the same manner as git. The design of this scriptable +interface models the internal C API; see +link:technical/api-credentials.txt[the git credential API] for more +background on the concepts. + +git-credential takes an "action" option on the command-line (one of +`fill`, `approve`, or `reject`) and reads a credential description +on stdin (see <<IOFMT,INPUT/OUTPUT FORMAT>>). + +If the action is `fill`, git-credential will attempt to add "username" +and "password" attributes to the description by reading config files, +by contacting any configured credential helpers, or by prompting the +user. The username and password attributes of the credential +description are then printed to stdout together with the attributes +already provided. + +If the action is `approve`, git-credential will send the description +to any configured credential helpers, which may store the credential +for later use. + +If the action is `reject`, git-credential will send the description to +any configured credential helpers, which may erase any stored +credential matching the description. + +If the action is `approve` or `reject`, no output should be emitted. + +TYPICAL USE OF GIT CREDENTIAL +----------------------------- + +An application using git-credential will typically use `git +credential` following these steps: + + 1. Generate a credential description based on the context. ++ +For example, if we want a password for +`https://example.com/foo.git`, we might generate the following +credential description (don't forget the blank line at the end; it +tells `git credential` that the application finished feeding all the +infomation it has): + + protocol=https + host=example.com + path=foo.git + + 2. Ask git-credential to give us a username and password for this + description. This is done by running `git credential fill`, + feeding the description from step (1) to its standard input. The complete + credential description (including the credential per se, i.e. the + login and password) will be produced on standard output, like: + + protocol=https + host=example.com + username=bob + password=secr3t ++ +In most cases, this means the attributes given in the input will be +repeated in the output, but git may also modify the credential +description, for example by removing the `path` attribute when the +protocol is HTTP(s) and `credential.useHttpPath` is false. ++ +If the `git credential` knew about the password, this step may +not have involved the user actually typing this password (the +user may have typed a password to unlock the keychain instead, +or no user interaction was done if the keychain was already +unlocked) before it returned `password=secr3t`. + + 3. Use the credential (e.g., access the URL with the username and + password from step (2)), and see if it's accepted. + + 4. Report on the success or failure of the password. If the + credential allowed the operation to complete successfully, then + it can be marked with an "approve" action to tell `git + credential` to reuse it in its next invocation. If the credential + was rejected during the operation, use the "reject" action so + that `git credential` will ask for a new password in its next + invocation. In either case, `git credential` should be fed with + the credential description obtained from step (2) (which also + contain the ones provided in step (1)). + +[[IOFMT]] +INPUT/OUTPUT FORMAT +------------------- + +`git credential` reads and/or writes (depending on the action used) +credential information in its standard input/output. This information +can correspond either to keys for which `git credential` will obtain +the login/password information (e.g. host, protocol, path), or to the +actual credential data to be obtained (login/password). + +The credential is split into a set of named attributes, with one +attribute per line. Each attribute is +specified by a key-value pair, separated by an `=` (equals) sign, +followed by a newline. The key may contain any bytes except `=`, +newline, or NUL. The value may contain any bytes except newline or NUL. +In both cases, all bytes are treated as-is (i.e., there is no quoting, +and one cannot transmit a value with newline or NUL in it). The list of +attributes is terminated by a blank line or end-of-file. +Git understands the following attributes: + +`protocol`:: + + The protocol over which the credential will be used (e.g., + `https`). + +`host`:: + + The remote hostname for a network credential. + +`path`:: + + The path with which the credential will be used. E.g., for + accessing a remote https repository, this will be the + repository's path on the server. + +`username`:: + + The credential's username, if we already have one (e.g., from a + URL, from the user, or from a previously run helper). + +`password`:: + + The credential's password, if we are asking it to be stored. + +`url`:: + + When this special attribute is read by `git credential`, the + value is parsed as a URL and treated as if its constituent parts + were read (e.g., `url=https://example.com` would behave as if + `protocol=https` and `host=example.com` had been provided). This + can help callers avoid parsing URLs themselves. Note that any + components which are missing from the URL (e.g., there is no + username in the example above) will be set to empty; if you want + to provide a URL and override some attributes, provide the URL + attribute first, followed by any overrides. diff --git a/Documentation/git-daemon.txt b/Documentation/git-daemon.txt index e8f757704c..7e5098a95e 100644 --- a/Documentation/git-daemon.txt +++ b/Documentation/git-daemon.txt @@ -16,6 +16,7 @@ SYNOPSIS [--reuseaddr] [--detach] [--pid-file=<file>] [--enable=<service>] [--disable=<service>] [--allow-override=<service>] [--forbid-override=<service>] + [--access-hook=<path>] [--inetd | [--listen=<host_or_ipaddr>] [--port=<n>] [--user=<user> [--group=<group>]] [<directory>...] @@ -171,6 +172,21 @@ the facility of inet daemon to achieve the same before spawning errors are not enabled, all errors report "access denied" to the client. The default is --no-informative-errors. +--access-hook=<path>:: + Every time a client connects, first run an external command + specified by the <path> with service name (e.g. "upload-pack"), + path to the repository, hostname (%H), canonical hostname + (%CH), ip address (%IP), and tcp port (%P) as its command line + arguments. The external command can decide to decline the + service by exiting with a non-zero status (or to allow it by + exiting with a zero status). It can also look at the $REMOTE_ADDR + and $REMOTE_PORT environment variables to learn about the + requestor when making this decision. ++ +The external command can optionally write a single line to its +standard output to be sent to the requestor as an error message when +it declines the service. + <directory>:: A directory to add to the whitelist of allowed directories. Unless --strict-paths is specified this will also include subdirectories diff --git a/Documentation/git-difftool.txt b/Documentation/git-difftool.txt index 31fc2e3aed..73ca7025a3 100644 --- a/Documentation/git-difftool.txt +++ b/Documentation/git-difftool.txt @@ -69,6 +69,14 @@ with custom merge tool commands and has the same value as `$MERGED`. --tool-help:: Print a list of diff tools that may be used with `--tool`. +--symlinks:: +--no-symlinks:: + 'git difftool''s default behavior is create symlinks to the + working tree when run in `--dir-diff` mode. ++ + Specifying `--no-symlinks` instructs 'git difftool' to create + copies instead. `--no-symlinks` is the default on Windows. + -x <command>:: --extcmd=<command>:: Specify a custom command for viewing diffs. diff --git a/Documentation/git-grep.txt b/Documentation/git-grep.txt index 3bec036883..cfecf848fb 100644 --- a/Documentation/git-grep.txt +++ b/Documentation/git-grep.txt @@ -42,8 +42,16 @@ CONFIGURATION grep.lineNumber:: If set to true, enable '-n' option by default. +grep.patternType:: + Set the default matching behavior. Using a value of 'basic', 'extended', + 'fixed', or 'perl' will enable the '--basic-regexp', '--extended-regexp', + '--fixed-strings', or '--perl-regexp' option accordingly, while the + value 'default' will return to the default matching behavior. + grep.extendedRegexp:: - If set to true, enable '--extended-regexp' option by default. + If set to true, enable '--extended-regexp' option by default. This + option is ignored when the 'grep.patternType' option is set to a value + other than 'default'. OPTIONS diff --git a/Documentation/git-log.txt b/Documentation/git-log.txt index 1f906208f9..585dac40ba 100644 --- a/Documentation/git-log.txt +++ b/Documentation/git-log.txt @@ -24,10 +24,6 @@ each commit introduces are shown. OPTIONS ------- --<n>:: - Limits the number of commits to show. - Note that this is a commit limiting option, see below. - <since>..<until>:: Show only commits between the named two commits. When either <since> or <until> is omitted, it defaults to @@ -137,6 +133,8 @@ Examples This makes sense only when following a strict policy of merging all topic branches when staying on a single integration branch. +`git log -3`:: + Limits the number of commits to show to 3. Discussion ---------- diff --git a/Documentation/git-ls-remote.txt b/Documentation/git-ls-remote.txt index 7a9b86a58a..774de5e9d9 100644 --- a/Documentation/git-ls-remote.txt +++ b/Documentation/git-ls-remote.txt @@ -42,6 +42,11 @@ OPTIONS it successfully talked with the remote repository, whether it found any matching refs. +--get-url:: + Expand the URL of the given remote repository taking into account any + "url.<base>.insteadOf" config setting (See linkgit:git-config[1]) and + exit without talking to the remote. + <repository>:: Location of the repository. The shorthand defined in $GIT_DIR/branches/ can be used. Use "." (dot) to list references in diff --git a/Documentation/git-merge-base.txt b/Documentation/git-merge-base.txt index b295bf8330..87842e33f8 100644 --- a/Documentation/git-merge-base.txt +++ b/Documentation/git-merge-base.txt @@ -11,6 +11,7 @@ SYNOPSIS [verse] 'git merge-base' [-a|--all] <commit> <commit>... 'git merge-base' [-a|--all] --octopus <commit>... +'git merge-base' --is-ancestor <commit> <commit> 'git merge-base' --independent <commit>... DESCRIPTION @@ -50,6 +51,12 @@ from linkgit:git-show-branch[1] when used with the `--merge-base` option. from any other. This mimics the behavior of 'git show-branch --independent'. +--is-ancestor:: + Check if the first <commit> is an ancestor of the second <commit>, + and exit with status 0 if true, or with status 1 if not. + Errors are signaled by a non-zero status that is not 1. + + OPTIONS ------- -a:: @@ -110,6 +117,27 @@ both '1' and '2' are merge-bases of A and B. Neither one is better than the other (both are 'best' merge bases). When the `--all` option is not given, it is unspecified which best one is output. +A common idiom to check "fast-forward-ness" between two commits A +and B is (or at least used to be) to compute the merge base between +A and B, and check if it is the same as A, in which case, A is an +ancestor of B. You will see this idiom used often in older scripts. + + A=$(git rev-parse --verify A) + if test "$A" = "$(git merge-base A B)" + then + ... A is an ancestor of B ... + fi + +In modern git, you can say this in a more direct way: + + if git merge-base --is-ancestor A B + then + ... A is an ancestor of B ... + fi + +instead. + + See also -------- linkgit:git-rev-list[1], diff --git a/Documentation/git-mergetool.txt b/Documentation/git-mergetool.txt index d7207bd9b9..6b563c500f 100644 --- a/Documentation/git-mergetool.txt +++ b/Documentation/git-mergetool.txt @@ -64,6 +64,9 @@ variable `mergetool.<tool>.trustExitCode` can be set to `true`. Otherwise, 'git mergetool' will prompt the user to indicate the success of the resolution after the custom tool has exited. +--tool-help:: + Print a list of merge tools that may be used with `--tool`. + -y:: --no-prompt:: Don't prompt before each invocation of the merge resolution diff --git a/Documentation/git-p4.txt b/Documentation/git-p4.txt index fe1f49bc6f..8228f33e3f 100644 --- a/Documentation/git-p4.txt +++ b/Documentation/git-p4.txt @@ -255,7 +255,7 @@ These options can be used to modify 'git p4 submit' behavior. p4. By default, this is the most recent p4 commit reachable from 'HEAD'. --M[<n>]:: +-M:: Detect renames. See linkgit:git-diff[1]. Renames will be represented in p4 using explicit 'move' operations. There is no corresponding option to detect copies, but there are @@ -465,13 +465,15 @@ git-p4.useClientSpec:: Submit variables ~~~~~~~~~~~~~~~~ git-p4.detectRenames:: - Detect renames. See linkgit:git-diff[1]. + Detect renames. See linkgit:git-diff[1]. This can be true, + false, or a score as expected by 'git diff -M'. git-p4.detectCopies:: - Detect copies. See linkgit:git-diff[1]. + Detect copies. See linkgit:git-diff[1]. This can be true, + false, or a score as expected by 'git diff -C'. git-p4.detectCopiesHarder:: - Detect copies harder. See linkgit:git-diff[1]. + Detect copies harder. See linkgit:git-diff[1]. A boolean. git-p4.preserveUser:: On submit, re-author changes to reflect the git author, diff --git a/Documentation/git-rebase.txt b/Documentation/git-rebase.txt index feb51a6ea3..fd535b06ab 100644 --- a/Documentation/git-rebase.txt +++ b/Documentation/git-rebase.txt @@ -8,9 +8,9 @@ git-rebase - Forward-port local commits to the updated upstream head SYNOPSIS -------- [verse] -'git rebase' [-i | --interactive] [options] [--onto <newbase>] +'git rebase' [-i | --interactive] [options] [--exec <cmd>] [--onto <newbase>] [<upstream>] [<branch>] -'git rebase' [-i | --interactive] [options] --onto <newbase> +'git rebase' [-i | --interactive] [options] [--exec <cmd>] [--onto <newbase>] --root [<branch>] 'git rebase' --continue | --skip | --abort @@ -210,7 +210,7 @@ rebase.autosquash:: OPTIONS ------- -<newbase>:: +--onto <newbase>:: Starting point at which to create the new commits. If the --onto option is not specified, the starting point is <upstream>. May be any valid commit, and not just an @@ -344,14 +344,36 @@ This uses the `--interactive` machinery internally, but combining it with the `--interactive` option explicitly is generally not a good idea unless you know what you are doing (see BUGS below). +-x <cmd>:: +--exec <cmd>:: + Append "exec <cmd>" after each line creating a commit in the + final history. <cmd> will be interpreted as one or more shell + commands. ++ +This option can only be used with the `--interactive` option +(see INTERACTIVE MODE below). ++ +You may execute several commands by either using one instance of `--exec` +with several commands: ++ + git rebase -i --exec "cmd1 && cmd2 && ..." ++ +or by giving more than one `--exec`: ++ + git rebase -i --exec "cmd1" --exec "cmd2" --exec ... ++ +If `--autosquash` is used, "exec" lines will not be appended for +the intermediate commits, and will only appear at the end of each +squash/fixup series. --root:: Rebase all commits reachable from <branch>, instead of limiting them with an <upstream>. This allows you to rebase - the root commit(s) on a branch. Must be used with --onto, and + the root commit(s) on a branch. When used with --onto, it will skip changes already contained in <newbase> (instead of - <upstream>). When used together with --preserve-merges, 'all' - root commits will be rewritten to have <newbase> as parent + <upstream>) whereas without --onto it will operate on every change. + When used together with both --onto and --preserve-merges, + 'all' root commits will be rewritten to have <newbase> as parent instead. --autosquash:: @@ -521,6 +543,24 @@ in `$SHELL`, or the default shell if `$SHELL` is not set), so you can use shell features (like "cd", ">", ";" ...). The command is run from the root of the working tree. +---------------------------------- +$ git rebase -i --exec "make test" +---------------------------------- + +This command lets you check that intermediate commits are compilable. +The todo list becomes like that: + +-------------------- +pick 5928aea one +exec make test +pick 04d0fda two +exec make test +pick ba46169 three +exec make test +pick f4593f9 four +exec make test +-------------------- + SPLITTING COMMITS ----------------- diff --git a/Documentation/git-remote.txt b/Documentation/git-remote.txt index a308f4c79f..e8c396b5f9 100644 --- a/Documentation/git-remote.txt +++ b/Documentation/git-remote.txt @@ -12,7 +12,7 @@ SYNOPSIS 'git remote' [-v | --verbose] 'git remote add' [-t <branch>] [-m <master>] [-f] [--tags|--no-tags] [--mirror=<fetch|push>] <name> <url> 'git remote rename' <old> <new> -'git remote rm' <name> +'git remote remove' <name> 'git remote set-head' <name> (-a | -d | <branch>) 'git remote set-branches' [--add] <name> <branch>... 'git remote set-url' [--push] <name> <newurl> [<oldurl>] @@ -85,6 +85,7 @@ In case <old> and <new> are the same, and <old> is a file under `$GIT_DIR/remotes` or `$GIT_DIR/branches`, the remote is converted to the configuration file format. +'remove':: 'rm':: Remove the remote named <name>. All remote-tracking branches and diff --git a/Documentation/git-rev-parse.txt b/Documentation/git-rev-parse.txt index 4cc3e9586f..3c63561f02 100644 --- a/Documentation/git-rev-parse.txt +++ b/Documentation/git-rev-parse.txt @@ -101,6 +101,12 @@ OPTIONS The option core.warnAmbiguousRefs is used to select the strict abbreviation mode. +--disambiguate=<prefix>:: + Show every object whose name begins with the given prefix. + The <prefix> must be at least 4 hexadecimal digits long to + avoid listing each and every object in the repository by + mistake. + --all:: Show all refs found in `refs/`. diff --git a/Documentation/git-submodule.txt b/Documentation/git-submodule.txt index fbbbcb282c..2de7bf0900 100644 --- a/Documentation/git-submodule.txt +++ b/Documentation/git-submodule.txt @@ -149,6 +149,11 @@ submodule with the `--init` option. + If `--recursive` is specified, this command will recurse into the registered submodules, and update any nested submodules within. ++ +If `--force` is specified, the submodule will be checked out (using +`git checkout --force` if appropriate), even if the commit specified in the +index of the containing repository already matches the commit checked out in +the submodule. summary:: Show commit summary between the given commit (defaults to HEAD) and @@ -210,7 +215,9 @@ OPTIONS This option is only valid for add and update commands. When running add, allow adding an otherwise ignored submodule path. When running update, throw away local changes in submodules when - switching to a different commit. + switching to a different commit; and always run a checkout operation + in the submodule, even if the commit listed in the index of the + containing repository matches the commit checked out in the submodule. --cached:: This option is only valid for status and summary commands. These diff --git a/Documentation/git.txt b/Documentation/git.txt index 677eb95995..fab6e77e02 100644 --- a/Documentation/git.txt +++ b/Documentation/git.txt @@ -22,18 +22,17 @@ unusually rich command set that provides both high-level operations and full access to internals. See linkgit:gittutorial[7] to get started, then see -link:everyday.html[Everyday Git] for a useful minimum set of commands, and -"man git-commandname" for documentation of each command. CVS users may -also want to read linkgit:gitcvs-migration[7]. See -the link:user-manual.html[Git User's Manual] for a more in-depth -introduction. +link:everyday.html[Everyday Git] for a useful minimum set of +commands. The link:user-manual.html[Git User's Manual] has a more +in-depth introduction. -The '<command>' is either a name of a Git command (see below) or an alias -as defined in the configuration file (see linkgit:git-config[1]). +After you mastered the basic concepts, you can come back to this +page to learn what commands git offers. You can learn more about +individual git commands with "git help command". linkgit:gitcli[7] +manual page gives you an overview of the command line command syntax. -Formatted and hyperlinked version of the latest git -documentation can be viewed at -`http://www.kernel.org/pub/software/scm/git/docs/`. +Formatted and hyperlinked version of the latest git documentation +can be viewed at `http://git-htmldocs.googlecode.com/git/git.html`. ifdef::stalenotes[] [NOTE] @@ -44,9 +43,15 @@ unreleased) version of git, that is available from 'master' branch of the `git.git` repository. Documentation for older releases are available here: -* link:v1.7.11.5/git.html[documentation for release 1.7.11.5] +* link:v1.7.12/git.html[documentation for release 1.7.12] * release notes for + link:RelNotes/1.7.12.txt[1.7.12]. + +* link:v1.7.11.6/git.html[documentation for release 1.7.11.6] + +* release notes for + link:RelNotes/1.7.11.6.txt[1.7.11.6], link:RelNotes/1.7.11.5.txt[1.7.11.5], link:RelNotes/1.7.11.4.txt[1.7.11.4], link:RelNotes/1.7.11.3.txt[1.7.11.3], @@ -406,24 +411,6 @@ help ...`. linkgit:git-replace[1] for more information. -FURTHER DOCUMENTATION ---------------------- - -See the references above to get started using git. The following is -probably more detail than necessary for a first-time user. - -The link:user-manual.html#git-concepts[git concepts chapter of the -user-manual] and linkgit:gitcore-tutorial[7] both provide -introductions to the underlying git architecture. - -See linkgit:gitworkflows[7] for an overview of recommended workflows. - -See also the link:howto-index.html[howto] documents for some useful -examples. - -The internals are documented in the -link:technical/api-index.html[GIT API documentation]. - GIT COMMANDS ------------ @@ -843,6 +830,29 @@ The index is also capable of storing multiple entries (called "stages") for a given pathname. These stages are used to hold the various unmerged version of a file when a merge is in progress. +FURTHER DOCUMENTATION +--------------------- + +See the references in the "description" section to get started +using git. The following is probably more detail than necessary +for a first-time user. + +The link:user-manual.html#git-concepts[git concepts chapter of the +user-manual] and linkgit:gitcore-tutorial[7] both provide +introductions to the underlying git architecture. + +See linkgit:gitworkflows[7] for an overview of recommended workflows. + +See also the link:howto-index.html[howto] documents for some useful +examples. + +The internals are documented in the +link:technical/api-index.html[GIT API documentation]. + +Users migrating from CVS may also want to +read linkgit:gitcvs-migration[7]. + + Authors ------- Git was started by Linus Torvalds, and is currently maintained by Junio diff --git a/Documentation/gitattributes.txt b/Documentation/gitattributes.txt index 80120ea14f..e16f3e175b 100644 --- a/Documentation/gitattributes.txt +++ b/Documentation/gitattributes.txt @@ -75,6 +75,8 @@ repositories (i.e., attributes of interest to all users) should go into `.gitattributes` files. Attributes that should affect all repositories for a single user should be placed in a file specified by the `core.attributesfile` configuration option (see linkgit:git-config[1]). +Its default value is $XDG_CONFIG_HOME/git/attributes. If $XDG_CONFIG_HOME +is either not set or empty, $HOME/.config/git/attributes is used instead. Attributes for all users on a system should be placed in the `$(prefix)/etc/gitattributes` file. diff --git a/Documentation/gitcli.txt b/Documentation/gitcli.txt index 3e72a5d68e..f6ba90c2da 100644 --- a/Documentation/gitcli.txt +++ b/Documentation/gitcli.txt @@ -37,11 +37,28 @@ arguments. Here are the rules: file called HEAD in your work tree, `git diff HEAD` is ambiguous, and you have to say either `git diff HEAD --` or `git diff -- HEAD` to disambiguate. - ++ When writing a script that is expected to handle random user-input, it is a good practice to make it explicit which arguments are which by placing disambiguating `--` at appropriate places. + * Many commands allow wildcards in paths, but you need to protect + them from getting globbed by the shell. These two mean different + things: ++ +-------------------------------- +$ git checkout -- *.c +$ git checkout -- \*.c +-------------------------------- ++ +The former lets your shell expand the fileglob, and you are asking +the dot-C files in your working tree to be overwritten with the version +in the index. The latter passes the `*.c` to Git, and you are asking +the paths in the index that match the pattern to be checked out to your +working tree. After running `git add hello.c; rm hello.c`, you will _not_ +see `hello.c` in your working tree with the former, but with the latter +you will. + Here are the rules regarding the "flags" that you should follow when you are scripting git: diff --git a/Documentation/gitignore.txt b/Documentation/gitignore.txt index 2e7328b830..c1f692a71e 100644 --- a/Documentation/gitignore.txt +++ b/Documentation/gitignore.txt @@ -50,7 +50,9 @@ the repository but are specific to one user's workflow) should go into the `$GIT_DIR/info/exclude` file. Patterns which a user wants git to ignore in all situations (e.g., backup or temporary files generated by the user's editor of choice) generally go into a file specified by -`core.excludesfile` in the user's `~/.gitconfig`. +`core.excludesfile` in the user's `~/.gitconfig`. Its default value is +$XDG_CONFIG_HOME/git/ignore. If $XDG_CONFIG_HOME is either not set or empty, +$HOME/.config/git/ignore is used instead. The underlying git plumbing tools, such as 'git ls-files' and 'git read-tree', read diff --git a/Documentation/rev-list-options.txt b/Documentation/rev-list-options.txt index def1340ac7..918c1109f2 100644 --- a/Documentation/rev-list-options.txt +++ b/Documentation/rev-list-options.txt @@ -8,7 +8,8 @@ ordering and formatting options, such as '--reverse'. -- --n 'number':: +-<number>:: +-n <number>:: --max-count=<number>:: Limit the number of commits to output. @@ -636,10 +637,14 @@ These options are mostly targeted for packing of git repositories. Only useful with '--objects'; print the object IDs that are not in packs. ---no-walk:: +--no-walk[=(sorted|unsorted)]:: - Only show the given revs, but do not traverse their ancestors. - This has no effect if a range is specified. + Only show the given commits, but do not traverse their ancestors. + This has no effect if a range is specified. If the argument + "unsorted" is given, the commits are show in the order they were + given on the command line. Otherwise (if "sorted" or no argument + was given), the commits are show in reverse chronological order + by commit time. --do-walk:: diff --git a/Documentation/revisions.txt b/Documentation/revisions.txt index dc0070bcb7..991fcd8f3f 100644 --- a/Documentation/revisions.txt +++ b/Documentation/revisions.txt @@ -55,6 +55,8 @@ when you run `git cherry-pick`. + Note that any of the 'refs/*' cases above may come either from the '$GIT_DIR/refs' directory or from the '$GIT_DIR/packed-refs' file. +While the ref name encoding is unspecified, UTF-8 is prefered as +some output processing may assume ref names in UTF-8. '<refname>@\{<date>\}', e.g. 'master@\{yesterday\}', 'HEAD@\{5 minutes ago\}':: A ref followed by the suffix '@' with a date specification @@ -213,6 +215,13 @@ of 'r1' and 'r2' and is defined as It is the set of commits that are reachable from either one of 'r1' or 'r2' but not from both. +In these two shorthands, you can omit one end and let it default to HEAD. +For example, 'origin..' is a shorthand for 'origin..HEAD' and asks "What +did I do since I forked from the origin branch?" Similarly, '..origin' +is a shorthand for 'HEAD..origin' and asks "What did the origin do since +I forked from them?" Note that '..' would mean 'HEAD..HEAD' which is an +empty range that is both reachable and unreachable from HEAD. + Two other shorthands for naming a set that is formed by a commit and its parent commits exist. The 'r1{caret}@' notation means all parents of 'r1'. 'r1{caret}!' includes commit 'r1' but excludes diff --git a/Documentation/technical/api-argv-array.txt b/Documentation/technical/api-argv-array.txt index 1b7d8f140c..1a797812fb 100644 --- a/Documentation/technical/api-argv-array.txt +++ b/Documentation/technical/api-argv-array.txt @@ -46,6 +46,10 @@ Functions Format a string and push it onto the end of the array. This is a convenience wrapper combining `strbuf_addf` and `argv_array_push`. +`argv_array_pop`:: + Remove the final element from the array. If there are no + elements in the array, do nothing. + `argv_array_clear`:: Free all memory associated with the array and return it to the initial, empty state. diff --git a/Documentation/technical/api-credentials.txt b/Documentation/technical/api-credentials.txt index adb6f0c896..5977b58e57 100644 --- a/Documentation/technical/api-credentials.txt +++ b/Documentation/technical/api-credentials.txt @@ -241,42 +241,9 @@ appended to its command line, which is one of: Remove a matching credential, if any, from the helper's storage. The details of the credential will be provided on the helper's stdin -stream. The credential is split into a set of named attributes. -Attributes are provided to the helper, one per line. Each attribute is -specified by a key-value pair, separated by an `=` (equals) sign, -followed by a newline. The key may contain any bytes except `=`, -newline, or NUL. The value may contain any bytes except newline or NUL. -In both cases, all bytes are treated as-is (i.e., there is no quoting, -and one cannot transmit a value with newline or NUL in it). The list of -attributes is terminated by a blank line or end-of-file. - -Git will send the following attributes (but may not send all of -them for a given credential; for example, a `host` attribute makes no -sense when dealing with a non-network protocol): - -`protocol`:: - - The protocol over which the credential will be used (e.g., - `https`). - -`host`:: - - The remote hostname for a network credential. - -`path`:: - - The path with which the credential will be used. E.g., for - accessing a remote https repository, this will be the - repository's path on the server. - -`username`:: - - The credential's username, if we already have one (e.g., from a - URL, from the user, or from a previously run helper). - -`password`:: - - The credential's password, if we are asking it to be stored. +stream. The exact format is the same as the input/output format of the +`git credential` plumbing command (see the section `INPUT/OUTPUT +FORMAT` in linkgit:git-credential[7] for a detailed specification). For a `get` operation, the helper should produce a list of attributes on stdout in the same format. A helper is free to produce a subset, or diff --git a/Documentation/user-manual.conf b/Documentation/user-manual.conf index 339b30919e..d87294de2f 100644 --- a/Documentation/user-manual.conf +++ b/Documentation/user-manual.conf @@ -14,7 +14,7 @@ ifdef::backend-docbook[] # "unbreak" docbook-xsl v1.68 for manpages. v1.69 works with or without this. [listingblock] <example><title>{title}</title> -<literallayout> +<literallayout class="monospaced"> | </literallayout> {title#}</example> |