diff options
Diffstat (limited to 'Documentation')
| -rw-r--r-- | Documentation/config/http.txt | 12 | ||||
| -rw-r--r-- | Documentation/config/user.txt | 7 | ||||
| -rw-r--r-- | Documentation/fetch-options.txt | 5 | ||||
| -rw-r--r-- | Documentation/git-commit-tree.txt | 22 | ||||
| -rw-r--r-- | Documentation/git-commit.txt | 40 | ||||
| -rw-r--r-- | Documentation/git-grep.txt | 3 | ||||
| -rw-r--r-- | Documentation/git-submodule.txt | 2 | ||||
| -rw-r--r-- | Documentation/git-update-index.txt | 16 | ||||
| -rw-r--r-- | Documentation/git.txt | 27 | ||||
| -rw-r--r-- | Documentation/gitcore-tutorial.txt | 2 |
10 files changed, 103 insertions, 33 deletions
diff --git a/Documentation/config/http.txt b/Documentation/config/http.txt index 5a32f5b0a5..e806033aab 100644 --- a/Documentation/config/http.txt +++ b/Documentation/config/http.txt @@ -71,7 +71,7 @@ http.saveCookies:: http.version:: Use the specified HTTP protocol version when communicating with a server. If you want to force the default. The available and default version depend - on libcurl. Actually the possible values of + on libcurl. Currently the possible values of this option are: - HTTP/2 @@ -84,7 +84,7 @@ http.sslVersion:: particular configuration of the crypto library in use. Internally this sets the 'CURLOPT_SSL_VERSION' option; see the libcurl documentation for more details on the format of this option and - for the ssl version supported. Actually the possible values of + for the ssl version supported. Currently the possible values of this option are: - sslv2 @@ -199,6 +199,14 @@ http.postBuffer:: Transfer-Encoding: chunked is used to avoid creating a massive pack file locally. Default is 1 MiB, which is sufficient for most requests. ++ +Note that raising this limit is only effective for disabling chunked +transfer encoding and therefore should be used only where the remote +server or a proxy only supports HTTP/1.0 or is noncompliant with the +HTTP standard. Raising this is not, in general, an effective solution +for most push problems, but can increase memory consumption +significantly since the entire buffer is allocated even for small +pushes. http.lowSpeedLimit, http.lowSpeedTime:: If the HTTP transfer speed is less than 'http.lowSpeedLimit' diff --git a/Documentation/config/user.txt b/Documentation/config/user.txt index 0557cbbceb..59aec7c3ae 100644 --- a/Documentation/config/user.txt +++ b/Documentation/config/user.txt @@ -13,7 +13,12 @@ committer.email:: Also, all of these can be overridden by the `GIT_AUTHOR_NAME`, `GIT_AUTHOR_EMAIL`, `GIT_COMMITTER_NAME`, `GIT_COMMITTER_EMAIL` and `EMAIL` environment variables. - See linkgit:git-commit-tree[1] for more information. ++ +Note that the `name` forms of these variables conventionally refer to +some form of a personal name. See linkgit:git-commit[1] and the +environment variables section of linkgit:git[1] for more information on +these settings and the `credential.username` option if you're looking +for authentication credentials instead. user.useConfigOnly:: Instruct Git to avoid trying to guess defaults for `user.email` diff --git a/Documentation/fetch-options.txt b/Documentation/fetch-options.txt index a2f78624a2..a115a1ae0e 100644 --- a/Documentation/fetch-options.txt +++ b/Documentation/fetch-options.txt @@ -139,7 +139,10 @@ ifndef::git-pull[] specified refspec (can be given more than once) to map the refs to remote-tracking branches, instead of the values of `remote.*.fetch` configuration variables for the remote - repository. See section on "Configured Remote-tracking + repository. Providing an empty `<refspec>` to the + `--refmap` option causes Git to ignore the configured + refspecs and rely entirely on the refspecs supplied as + command-line arguments. See section on "Configured Remote-tracking Branches" for details. -t:: diff --git a/Documentation/git-commit-tree.txt b/Documentation/git-commit-tree.txt index 4b90b9c12a..ec15ee8d6f 100644 --- a/Documentation/git-commit-tree.txt +++ b/Documentation/git-commit-tree.txt @@ -69,7 +69,6 @@ OPTIONS Do not GPG-sign commit, to countermand a `--gpg-sign` option given earlier on the command line. - Commit Information ------------------ @@ -79,26 +78,6 @@ A commit encapsulates: - author name, email and date - committer name and email and the commit time. -While parent object ids are provided on the command line, author and -committer information is taken from the following environment variables, -if set: - - GIT_AUTHOR_NAME - GIT_AUTHOR_EMAIL - GIT_AUTHOR_DATE - GIT_COMMITTER_NAME - GIT_COMMITTER_EMAIL - GIT_COMMITTER_DATE - -(nb "<", ">" and "\n"s are stripped) - -In case (some of) these environment variables are not set, the information -is taken from the configuration items user.name and user.email, or, if not -present, the environment variable EMAIL, or, if that is not set, -system user name and the hostname used for outgoing mail (taken -from `/etc/mailname` and falling back to the fully qualified hostname when -that file does not exist). - A commit comment is read from stdin. If a changelog entry is not provided via "<" redirection, 'git commit-tree' will just wait for one to be entered and terminated with ^D. @@ -117,6 +96,7 @@ FILES SEE ALSO -------- linkgit:git-write-tree[1] +linkgit:git-commit[1] GIT --- diff --git a/Documentation/git-commit.txt b/Documentation/git-commit.txt index ced5a9beab..13f653989f 100644 --- a/Documentation/git-commit.txt +++ b/Documentation/git-commit.txt @@ -367,9 +367,6 @@ changes to tracked files. + For more details, see the 'pathspec' entry in linkgit:gitglossary[7]. -:git-commit: 1 -include::date-formats.txt[] - EXAMPLES -------- When recording your own work, the contents of modified files in @@ -463,6 +460,43 @@ alter the order the changes are committed, because the merge should be recorded as a single commit. In fact, the command refuses to run when given pathnames (but see `-i` option). +COMMIT INFORMATION +------------------ + +Author and committer information is taken from the following environment +variables, if set: + + GIT_AUTHOR_NAME + GIT_AUTHOR_EMAIL + GIT_AUTHOR_DATE + GIT_COMMITTER_NAME + GIT_COMMITTER_EMAIL + GIT_COMMITTER_DATE + +(nb "<", ">" and "\n"s are stripped) + +The author and committer names are by convention some form of a personal name +(that is, the name by which other humans refer to you), although Git does not +enforce or require any particular form. Arbitrary Unicode may be used, subject +to the constraints listed above. This name has no effect on authentication; for +that, see the `credential.username` variable in linkgit:git-config[1]. + +In case (some of) these environment variables are not set, the information +is taken from the configuration items `user.name` and `user.email`, or, if not +present, the environment variable EMAIL, or, if that is not set, +system user name and the hostname used for outgoing mail (taken +from `/etc/mailname` and falling back to the fully qualified hostname when +that file does not exist). + +The `author.name` and `committer.name` and their corresponding email options +override `user.name` and `user.email` if set and are overridden themselves by +the environment variables. + +The typical usage is to set just the `user.name` and `user.email` variables; +the other options are provided for more complex use cases. + +:git-commit: 1 +include::date-formats.txt[] DISCUSSION ---------- diff --git a/Documentation/git-grep.txt b/Documentation/git-grep.txt index c89fb569e3..ffc3a6efdc 100644 --- a/Documentation/git-grep.txt +++ b/Documentation/git-grep.txt @@ -96,7 +96,8 @@ OPTIONS Recursively search in each submodule that has been initialized and checked out in the repository. When used in combination with the <tree> option the prefix of all submodule output will be the name of - the parent project's <tree> object. + the parent project's <tree> object. This option has no effect + if `--no-index` is given. -a:: --text:: diff --git a/Documentation/git-submodule.txt b/Documentation/git-submodule.txt index 5232407f68..218942acd1 100644 --- a/Documentation/git-submodule.txt +++ b/Documentation/git-submodule.txt @@ -229,7 +229,7 @@ As an example, the command below will show the path and currently checked out commit for each submodule: + -------------- -git submodule foreach 'echo $path `git rev-parse HEAD`' +git submodule foreach 'echo $sm_path `git rev-parse HEAD`' -------------- sync [--recursive] [--] [<path>...]:: diff --git a/Documentation/git-update-index.txt b/Documentation/git-update-index.txt index c7a6271daf..1489cb09a0 100644 --- a/Documentation/git-update-index.txt +++ b/Documentation/git-update-index.txt @@ -549,6 +549,22 @@ The untracked cache extension can be enabled by the `core.untrackedCache` configuration variable (see linkgit:git-config[1]). +NOTES +----- + +Users often try to use the assume-unchanged and skip-worktree bits +to tell Git to ignore changes to files that are tracked. This does not +work as expected, since Git may still check working tree files against +the index when performing certain operations. In general, Git does not +provide a way to ignore changes to tracked files, so alternate solutions +are recommended. + +For example, if the file you want to change is some sort of config file, +the repository can include a sample config file that can then be copied +into the ignored name and modified. The repository can even include a +script to treat the sample file as a template, modifying and copying it +automatically. + SEE ALSO -------- linkgit:git-config[1], diff --git a/Documentation/git.txt b/Documentation/git.txt index b1597ac002..0093c647bf 100644 --- a/Documentation/git.txt +++ b/Documentation/git.txt @@ -482,13 +482,36 @@ double-quotes and respecting backslash escapes. E.g., the value Git Commits ~~~~~~~~~~~ `GIT_AUTHOR_NAME`:: + The human-readable name used in the author identity when creating commit or + tag objects, or when writing reflogs. Overrides the `user.name` and + `author.name` configuration settings. + `GIT_AUTHOR_EMAIL`:: + The email address used in the author identity when creating commit or + tag objects, or when writing reflogs. Overrides the `user.email` and + `author.email` configuration settings. + `GIT_AUTHOR_DATE`:: + The date used for the author identity when creating commit or tag objects, or + when writing reflogs. See linkgit:git-commit[1] for valid formats. + `GIT_COMMITTER_NAME`:: + The human-readable name used in the committer identity when creating commit or + tag objects, or when writing reflogs. Overrides the `user.name` and + `committer.name` configuration settings. + `GIT_COMMITTER_EMAIL`:: + The email address used in the author identity when creating commit or + tag objects, or when writing reflogs. Overrides the `user.email` and + `committer.email` configuration settings. + `GIT_COMMITTER_DATE`:: -'EMAIL':: - see linkgit:git-commit-tree[1] + The date used for the committer identity when creating commit or tag objects, or + when writing reflogs. See linkgit:git-commit[1] for valid formats. + +`EMAIL`:: + The email address used in the author and committer identities if no other + relevant environment variable or configuration setting has been set. Git Diffs ~~~~~~~~~ diff --git a/Documentation/gitcore-tutorial.txt b/Documentation/gitcore-tutorial.txt index f880d21dfb..c0b95256cc 100644 --- a/Documentation/gitcore-tutorial.txt +++ b/Documentation/gitcore-tutorial.txt @@ -751,7 +751,7 @@ to it. ================================================ If you make the decision to start your new branch at some other point in the history than the current `HEAD`, you can do so by -just telling 'git checkout' what the base of the checkout would be. +just telling 'git switch' what the base of the checkout would be. In other words, if you have an earlier tag or branch, you'd just do ------------ |