diff options
Diffstat (limited to 'Documentation')
157 files changed, 1314 insertions, 1581 deletions
diff --git a/Documentation/CodingGuidelines b/Documentation/CodingGuidelines index ba2006d892..fe1c1e5bc2 100644 --- a/Documentation/CodingGuidelines +++ b/Documentation/CodingGuidelines @@ -152,7 +152,7 @@ Writing Documentation: when writing or modifying command usage strings and synopsis sections in the manual pages: - Placeholders are enclosed in angle brackets: + Placeholders are spelled in lowercase and enclosed in angle brackets: <file> --sort=<key> --abbrev[=<n>] diff --git a/Documentation/RelNotes/1.7.4.2.txt b/Documentation/RelNotes/1.7.4.2.txt new file mode 100644 index 0000000000..ef4ce1fcd3 --- /dev/null +++ b/Documentation/RelNotes/1.7.4.2.txt @@ -0,0 +1,58 @@ +Git v1.7.4.2 Release Notes +========================== + +Fixes since v1.7.4.1 +-------------------- + + * Many documentation updates to match "git cmd -h" output and the + git-cmd manual page. + + * We used to keep one file descriptor open for each and every packfile + that we have a mmap window on it (read: "in use"), even when for very + tiny packfiles. We now close the file descriptor early when the entire + packfile fits inside one mmap window. + + * "git bisect visualize" tried to run "gitk" in windowing + environments even when "gitk" is not installed, resulting in a + strange error message. + + * "git clone /no/such/path" did not fail correctly. + + * "git commit" did not correctly error out when the user asked to use a + non existent file as the commit message template. + + * "git diff --stat -B" ran on binary files counted the changes in lines, + which was nonsensical. + + * "git diff -M" opportunistically detected copies, which was not + necessarily a good thing, especially when it is internally run by + recursive merge. + + * "git difftool" didn't tell (g)vimdiff that the files it is reading are + to be opened read-only. + + * "git merge" didn't pay attention to prepare-commit-msg hook, even + though if a merge is conflicted and manually resolved, the subsequent + "git commit" would have triggered the hook, which was inconsistent. + + * "git patch-id" (and commands like "format-patch --ignore-in-upstream" + that use it as their internal logic) handled changes to files that end + with incomplete lines incorrectly. + + * The official value to tell "git push" to push the current branch back + to update the upstream branch it forked from is now called "upstream". + The old name "tracking" is and will be supported. + + * "git submodule update" used to honor the --merge/--rebase option (or + corresponding configuration variables) even for a newly cloned + subproject, which made no sense (so/submodule-no-update-first-time). + + * gitweb's "highlight" interface mishandled tabs. + + * gitweb didn't understand timezones with GMT offset that is not + multiple of a whole hour. + + * gitweb had a few forward-incompatible syntactic constructs and + also used incorrect variable when showing the file mode in a diff. + +And other minor fixes and documentation updates. diff --git a/Documentation/RelNotes/1.7.4.3.txt b/Documentation/RelNotes/1.7.4.3.txt new file mode 100644 index 0000000000..02a3d5bdf6 --- /dev/null +++ b/Documentation/RelNotes/1.7.4.3.txt @@ -0,0 +1,32 @@ +Git v1.7.4.3 Release Notes +========================== + +Fixes since v1.7.4.2 +-------------------- + + * "git apply" used to confuse lines updated by previous hunks as lines + that existed before when applying a hunk, contributing misapplication + of patches with offsets. + + * "git branch --track" (and "git checkout --track --branch") used to + allow setting up a random non-branch that does not make sense to follow + as the "upstream". The command correctly diagnoses it as an error. + + * "git checkout $other_branch" silently removed untracked symbolic links + in the working tree that are in the way in order to check out paths + under it from the named branch. + + * "git cvsimport" did not bail out immediately when the cvs server cannot + be reached, spewing unnecessary error messages that complain about the + server response that it never got. + + * "git diff --quiet" did not work very well with the "--diff-filter" + option. + + * "git grep -n" lacked a long-hand synonym --line-number. + + * "git stash apply" reported the result of its operation by running + "git status" from the top-level of the working tree; it should (and + now does) run it from the user's working directory. + +And other minor fixes and documentation updates. diff --git a/Documentation/RelNotes/1.7.4.4.txt b/Documentation/RelNotes/1.7.4.4.txt new file mode 100644 index 0000000000..ff06e04a58 --- /dev/null +++ b/Documentation/RelNotes/1.7.4.4.txt @@ -0,0 +1,35 @@ +Git v1.7.4.4 Release Notes +========================== + +Fixes since v1.7.4.3 +-------------------- + + * Compilation of sha1_file.c on BSD platforms were broken due to our + recent use of getrlimit() without including <sys/resource.h>. + + * "git config" did not diagnose incorrect configuration variable names. + + * "git format-patch" did not wrap a long subject line that resulted from + rfc2047 encoding. + + * "git instaweb" should work better again with plackup. + + * "git log --max-count=4 -Sfoobar" now shows 4 commits that changes the + number of occurrences of string "foobar"; it used to scan only for 4 + commits and then emitted only matching ones. + + * "git log --first-parent --boundary $c^..$c" segfaulted on a merge. + + * "git pull" into an empty branch should have behaved as if + fast-forwarding from emptiness to the version being pulled, with + the usual protection against overwriting untracked files. + + * "git submodule" that is run while a merge in the superproject is in + conflicted state tried to process each conflicted submodule up to + three times. + + * "git status" spent all the effort to notice racily-clean index entries + but didn't update the index file to help later operations go faster in + some cases. + +And other minor fixes and documentation updates. diff --git a/Documentation/RelNotes/1.7.4.5.txt b/Documentation/RelNotes/1.7.4.5.txt new file mode 100644 index 0000000000..b7a0eeb22f --- /dev/null +++ b/Documentation/RelNotes/1.7.4.5.txt @@ -0,0 +1,4 @@ +Git v1.7.4.5 Release Notes +========================== + +This contains only minor documentation fixes accumulated since 1.7.4.4. diff --git a/Documentation/RelNotes/1.7.5.txt b/Documentation/RelNotes/1.7.5.txt new file mode 100644 index 0000000000..987919c321 --- /dev/null +++ b/Documentation/RelNotes/1.7.5.txt @@ -0,0 +1,132 @@ +Git v1.7.5 Release Notes +======================== + +Updates since v1.7.4 +-------------------- + + * Various MinGW portability fixes. + + * Various git-p4 enhancements (in contrib). + + * Various vcs-svn, git-svn and gitk enhancements and fixes. + + * Various git-gui updates (0.14.0). + + * Update to more modern HP-UX port. + + * The codebase is getting prepared for i18n/l10n; no translated + strings nor translation mechanism in the code yet, but the strings + are being marked for l10n. + + * The bash completion script can now complete symmetric difference + for "git diff" command, e.g. "git diff ...bra<TAB>". + + * The default minimum length of abbreviated and unique object names + can now be configured by setting the core.abbrev configuration + variable. + + * "git apply -v" reports offset lines when the patch does not apply at + the exact location recorded in the diff output. + + * "git config" used to be also known as "git repo-config", but the old + name is now officially deprecated. + + * "git checkout --detach <commit>" is a more user friendly synonym for + "git checkout <commit>^0". + + * "git checkout" performed on detached HEAD gives a warning and + advice when the commit being left behind will become unreachable from + any branch or tag. + + * "git cherry-pick" and "git revert" can be told to use a custom merge + strategy, similar to "git rebase". + + * "git cherry-pick" remembers which commit failed to apply when it is + stopped by conflicts, making it unnecessary to use "commit -c $commit" + to conclude it. + + * "git cvsimport" bails out immediately when the cvs server cannot be + reached, without spewing unnecessary error messages that complain about + the server response it never got. + + * "git fetch" vs "git upload-pack" transfer learned 'no-done' + protocol extension to save one round-trip after the content + negotiation is done. This saves one HTTP RPC, reducing the overall + latency for a trivial fetch. + + * "git fetch" can be told to recursively fetch submodules on-demand. + + * "git grep -f <filename>" learned to treat "-" as "read from the + standard input stream". + + * "git grep --no-index" did not honor pathspecs correctly, returning + paths outside the specified area. + + * "git init" learned the --separate-git-dir option to allow the git + directory for a new repository created elsewhere and linked via the + gitdir mechanism. This is primarily to help submodule support later + to switch between a branch of superproject that has the submodule + and another that does not. + + * "git log" type commands now understand globbing pathspecs. You + can say "git log -- '*.txt'" for example. + + * "git log" family of commands learned --cherry and --cherry-mark + options that can be used to view two diverged branches while omitting + or highlighting equivalent changes that appear on both sides of a + symmetric difference (e.g. "log --cherry A...B"). + + * A lazy "git merge" that didn't say what to merge used to be an error. + When run on a branch that has an upstream defined, however, the command + now merges from the configured upstream. + + * "git mergetool" learned how to drive "beyond compare 3" as well. + + * "git rerere forget" without pathspec used to forget all the saved + conflicts that relate to the current merge; it now requires you to + give it pathspecs. + + * "git rev-list --objects $revs -- $pathspec" now limits the objects listed + in its output properly with the pathspec, in preparation for narrow + clones. + + * "git push" with no parameters gives better advice messages when + "tracking" is used as the push.default semantics or there is no remote + configured yet. + + * A possible value to the "push.default" configuration variable, + 'tracking', gained a synonym that more naturally describes what it + does, 'upstream'. + + * "git rerere" learned a new subcommand "remaining" that is similar to + "status" and lists the paths that had conflicts which are known to + rerere, but excludes the paths that have already been marked as + resolved in the index from its output. "git mergetool" has been + updated to use this facility. + +Also contains various documentation updates. + + +Fixes since v1.7.4 +------------------ + +All of the fixes in the v1.7.4.X maintenance series are included in this +release, unless otherwise noted. + + * "git fetch" from a client that is mostly following the remote + needlessly told all of its refs to the server for both sides to + compute the set of objects that need to be transferred efficiently, + instead of stopping when the server heard enough. In a project with + many tags, this turns out to be extremely wasteful, especially over + the smart HTTP transport (sp/maint-{upload,fetch}-pack-stop-early~1). + + * "git fetch" run from a repository that uses the same repository as + its alternate object store as the repository it is fetching from + did not tell the server that it already has access to objects + reachable from the refs in their common alternate object store, + causing it to fetch unnecessary objects (jc/maint-fetch-alt). + + * "git remote add --mirror" created a configuration that is suitable for + doing both a mirror fetch and a mirror push at the same time, which + made little sense. We now warn and require the command line to specify + either --mirror=fetch or --mirror=push. diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches index 72741ebda1..c6a5032912 100644 --- a/Documentation/SubmittingPatches +++ b/Documentation/SubmittingPatches @@ -10,10 +10,18 @@ Checklist (and a short version for the impatient): description (50 characters is the soft limit, see DISCUSSION in git-commit(1)), and should skip the full stop - the body should provide a meaningful commit message, which: - - uses the imperative, present tense: "change", - not "changed" or "changes". - - includes motivation for the change, and contrasts - its implementation with previous behaviour + . explains the problem the change tries to solve, iow, what + is wrong with the current code without the change. + . justifies the way the change solves the problem, iow, why + the result with the change is better. + . alternate solutions considered but discarded, if any. + - describe changes in imperative mood, e.g. "make xyzzy do frotz" + instead of "[This patch] makes xyzzy do frotz" or "[I] changed + xyzzy to do frotz", as if you are giving orders to the codebase + to change its behaviour. + - try to make sure your explanation can be understood without + external resources. Instead of giving a URL to a mailing list + archive, summarize the relevant points of the discussion. - add a "Signed-off-by: Your Name <you@example.com>" line to the commit message (or just use the option "-s" when committing) to confirm that you agree to the Developer's Certificate of Origin @@ -90,7 +98,10 @@ your commit head. Instead, always make a commit with complete commit message and generate a series of patches from your repository. It is a good discipline. -Describe the technical detail of the change(s). +Give an explanation for the change(s) that is detailed enough so +that people can judge if it is good thing to do, without reading +the actual patch text to determine how well the code does what +the explanation promises to do. If your description starts to get too long, that's a sign that you probably need to split up your commit to finer grained pieces. @@ -99,9 +110,8 @@ help reviewers check the patch, and future maintainers understand the code, are the most beautiful patches. Descriptions that summarise the point in the subject well, and describe the motivation for the change, the approach taken by the change, and if relevant how this -differs substantially from the prior version, can be found on Usenet -archives back into the late 80's. Consider it like good Netiquette, -but for code. +differs substantially from the prior version, are all good things +to have. Oh, another thing. I am picky about whitespaces. Make sure your changes do not trigger errors with the sample pre-commit hook shipped @@ -266,7 +276,7 @@ don't hide your real name. If you like, you can put extra tags at the end: -1. "Reported-by:" is used to to credit someone who found the bug that +1. "Reported-by:" is used to credit someone who found the bug that the patch attempts to fix. 2. "Acked-by:" says that the person who is more familiar with the area the patch attempts to modify liked the patch. @@ -598,4 +608,3 @@ following commands: Just make sure to disable line wrapping in the email client (GMail web interface will line wrap no matter what, so you need to use a real IMAP client). - diff --git a/Documentation/config.txt b/Documentation/config.txt index c5e183516a..750c86d4f5 100644 --- a/Documentation/config.txt +++ b/Documentation/config.txt @@ -62,7 +62,7 @@ Internal whitespace within a variable value is retained verbatim. The values following the equals sign in variable assign are all either a string, an integer, or a boolean. Boolean values may be given as yes/no, -0/1, true/false or on/off. Case is not significant in boolean values, when +1/0, true/false or on/off. Case is not significant in boolean values, when converting value to the canonical form using '--bool' type specifier; 'git config' will ensure that the output is "true" or "false". @@ -320,7 +320,7 @@ core.worktree:: Set the path to the root of the working tree. This can be overridden by the GIT_WORK_TREE environment variable and the '--work-tree' command line option. - The value can an absolute path or relative to the path to + The value can be an absolute path or relative to the path to the .git directory, which is either specified by --git-dir or GIT_DIR, or automatically discovered. If --git-dir or GIT_DIR is specified but none of @@ -376,15 +376,6 @@ core.warnAmbiguousRefs:: If true, git will warn you if the ref name you passed it is ambiguous and might match multiple refs in the .git/refs/ tree. True by default. -core.abbrevguard:: - Even though git makes sure that it uses enough hexdigits to show - an abbreviated object name unambiguously, as more objects are - added to the repository over time, a short name that used to be - unique will stop being unique. Git uses this many extra hexdigits - that are more than necessary to make the object name currently - unique, in the hope that its output will stay unique a bit longer. - Defaults to 0. - core.compression:: An integer -1..9, indicating a default compression level. -1 is the zlib default. 0 means no compression, @@ -567,6 +558,12 @@ core.sparseCheckout:: Enable "sparse checkout" feature. See section "Sparse checkout" in linkgit:git-read-tree[1] for more information. +core.abbrev:: + Set the length object names are abbreviated to. If unspecified, + many commands abbreviate to 7 hexdigits, which may not be enough + for abbreviated object names to stay unique for sufficiently long + time. + add.ignore-errors:: add.ignoreErrors:: Tells 'git add' to continue adding files when some files cannot be @@ -900,9 +897,13 @@ diff.wordRegex:: characters are *ignorable* whitespace. fetch.recurseSubmodules:: - A boolean value which changes the behavior for fetch and pull, the - default is to not recursively fetch populated submodules unless - configured otherwise. + This option can be either set to a boolean value or to 'on-demand'. + Setting it to a boolean changes the behavior of fetch and pull to + unconditionally recurse into submodules when set to true or to not + recurse at all when set to false. When set to 'on-demand' (the default + value), fetch and pull will only recurse into a populated submodule + when its superproject retrieves a commit that updates the submodule's + reference. fetch.unpackLimit:: If the number of objects fetched over the git native @@ -1101,6 +1102,12 @@ All gitcvs variables except for 'gitcvs.usecrlfattr' and is one of "ext" and "pserver") to make them apply only for the given access method. +grep.lineNumber:: + If set to true, enable '-n' option by default. + +grep.extendedRegexp:: + If set to true, enable '--extended-regexp' option by default. + gui.commitmsgwidth:: Defines how wide the commit message window is in the linkgit:git-gui[1]. "75" is the default. @@ -1591,7 +1598,8 @@ push.default:: * `matching` - push all matching branches. All branches having the same name in both ends are considered to be matching. This is the default. -* `tracking` - push the current branch to its upstream branch. +* `upstream` - push the current branch to its upstream branch. +* `tracking` - deprecated synonym for `upstream`. * `current` - push the current branch to a branch of the same name. rebase.stat:: @@ -1819,7 +1827,7 @@ submodule.<name>.update:: linkgit:git-submodule[1] and linkgit:gitmodules[5] for details. submodule.<name>.fetchRecurseSubmodules:: - This option can be used to enable/disable recursive fetching of this + This option can be used to control recursive fetching of this submodule. It can be overridden by using the --[no-]recurse-submodules command line option to "git fetch" and "git pull". This setting will override that from in the linkgit:gitmodules[5] diff --git a/Documentation/diff-generate-patch.txt b/Documentation/diff-generate-patch.txt index 3ac2beac62..c57460c03d 100644 --- a/Documentation/diff-generate-patch.txt +++ b/Documentation/diff-generate-patch.txt @@ -74,10 +74,13 @@ separate lines indicate the old and the new mode. combined diff format -------------------- -"git-diff-tree", "git-diff-files" and "git-diff" can take '-c' or -'--cc' option to produce 'combined diff'. For showing a merge commit -with "git log -p", this is the default format; you can force showing -full diff with the '-m' option. +Any diff-generating command can take the `-c` or `--cc` option to +produce a 'combined diff' when showing a merge. This is the default +format when showing merges with linkgit:git-diff[1] or +linkgit:git-show[1]. Note also that you can give the `-m' option to any +of these commands to force generation of diffs with individual parents +of a merge. + A 'combined diff' format looks like this: ------------ diff --git a/Documentation/fetch-options.txt b/Documentation/fetch-options.txt index f37276e5ad..39d326abc6 100644 --- a/Documentation/fetch-options.txt +++ b/Documentation/fetch-options.txt @@ -65,14 +65,33 @@ ifndef::git-pull[] specified with the remote.<name>.tagopt setting. See linkgit:git-config[1]. ---[no-]recurse-submodules:: - This option controls if new commits of all populated submodules should - be fetched too (see linkgit:git-config[1] and linkgit:gitmodules[5]). +--recurse-submodules[=yes|on-demand|no]:: + This option controls if and under what conditions new commits of + populated submodules should be fetched too. It can be used as a + boolean option to completely disable recursion when set to 'no' or to + unconditionally recurse into all populated submodules when set to + 'yes', which is the default when this option is used without any + value. Use 'on-demand' to only recurse into a populated submodule + when the superproject retrieves a commit that updates the submodule's + reference to a commit that isn't already in the local submodule + clone. + +--no-recurse-submodules:: + Disable recursive fetching of submodules (this has the same effect as + using the '--recurse-submodules=no' option). --submodule-prefix=<path>:: Prepend <path> to paths printed in informative messages such as "Fetching submodule foo". This option is used internally when recursing over submodules. + +--recurse-submodules-default=[yes|on-demand]:: + This option is used internally to temporarily provide a + non-negative default value for the --recurse-submodules + option. All other methods of configuring fetch's submodule + recursion (such as settings in linkgit:gitmodules[5] and + linkgit:git-config[1]) override this option, as does + specifying --[no-]recurse-submodules directly. endif::git-pull[] -u:: diff --git a/Documentation/git-add.txt b/Documentation/git-add.txt index a03448f923..7eebbefe7b 100644 --- a/Documentation/git-add.txt +++ b/Documentation/git-add.txt @@ -378,14 +378,6 @@ linkgit:git-mv[1] linkgit:git-commit[1] linkgit:git-update-index[1] -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-am.txt b/Documentation/git-am.txt index 51297d09ec..6b1b5af64e 100644 --- a/Documentation/git-am.txt +++ b/Documentation/git-am.txt @@ -173,9 +173,9 @@ aborts in the middle. You can recover from this in one of two ways: the index file to bring it into a state that the patch should have produced. Then run the command with the '--resolved' option. -The command refuses to process new mailboxes while the `.git/rebase-apply` -directory exists, so if you decide to start over from scratch, -run `rm -f -r .git/rebase-apply` before running the command with mailbox +The command refuses to process new mailboxes until the current +operation is finished, so if you decide to start over from scratch, +run `git am --abort` before running the command with mailbox names. Before any patches are applied, ORIG_HEAD is set to the tip of the @@ -189,15 +189,6 @@ SEE ALSO -------- linkgit:git-apply[1]. - -Author ------- -Written by Junio C Hamano <gitster@pobox.com> - -Documentation --------------- -Documentation by Petr Baudis, Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-annotate.txt b/Documentation/git-annotate.txt index 0590eec056..9eb75c37da 100644 --- a/Documentation/git-annotate.txt +++ b/Documentation/git-annotate.txt @@ -27,10 +27,6 @@ SEE ALSO -------- linkgit:git-blame[1] -AUTHOR ------- -Written by Ryan Anderson <ryan@michonline.com>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-apply.txt b/Documentation/git-apply.txt index 881652f490..afd2c9ae59 100644 --- a/Documentation/git-apply.txt +++ b/Documentation/git-apply.txt @@ -22,7 +22,7 @@ DESCRIPTION ----------- Reads the supplied diff output (i.e. "a patch") and applies it to files. With the `--index` option the patch is also applied to the index, and -with the `--cache` option the patch is only applied to the index. +with the `--cached` option the patch is only applied to the index. Without these options, the command applies the patch only to files, and does not require them to be in a git repository. @@ -246,20 +246,10 @@ If `--index` is not specified, then the submodule commits in the patch are ignored and only the absence or presence of the corresponding subdirectory is checked and (if possible) updated. - SEE ALSO -------- linkgit:git-am[1]. - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by Junio C Hamano - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-archimport.txt b/Documentation/git-archimport.txt index 2411ce5bfe..f4504ba9bf 100644 --- a/Documentation/git-archimport.txt +++ b/Documentation/git-archimport.txt @@ -107,14 +107,6 @@ OPTIONS Archive/branch identifier in a format that `tla log` understands. -Author ------- -Written by Martin Langhoff <martin@laptop.org>. - -Documentation --------------- -Documentation by Junio C Hamano, Martin Langhoff and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-archive.txt b/Documentation/git-archive.txt index bf5037ab2a..9c750e2444 100644 --- a/Documentation/git-archive.txt +++ b/Documentation/git-archive.txt @@ -98,7 +98,8 @@ tar.umask:: tar archive entries. The default is 0002, which turns off the world write bit. The special value "user" indicates that the archiving user's umask will be used instead. See umask(2) for - details. + details. If `--remote` is used then only the configuration of + the remote repository takes effect. ATTRIBUTES ---------- @@ -153,14 +154,6 @@ SEE ALSO -------- linkgit:gitattributes[5] -Author ------- -Written by Franck Bui-Huu and Rene Scharfe. - -Documentation --------------- -Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-bisect.txt b/Documentation/git-bisect.txt index c39d957c3a..7b7bafba0c 100644 --- a/Documentation/git-bisect.txt +++ b/Documentation/git-bisect.txt @@ -241,7 +241,12 @@ exit(3) manual page), as the value is chopped with "& 0377". The special exit code 125 should be used when the current source code cannot be tested. If the script exits with this code, the current -revision will be skipped (see `git bisect skip` above). +revision will be skipped (see `git bisect skip` above). 125 was chosen +as the highest sensible value to use for this purpose, because 126 and 127 +are used by POSIX shells to signal specific error status (127 is for +command not found, 126 is for command found but not executable---these +details do not matter, as they are normal errors in the script, as far as +"bisect run" is concerned). You may often find that during a bisect session you want to have temporary modifications (e.g. s/#define DEBUG 0/#define DEBUG 1/ in a @@ -274,61 +279,68 @@ $ git bisect start HEAD origin -- # HEAD is bad, origin is good $ git bisect run make test # "make test" builds and tests ------------ -* Automatically bisect a broken test suite: +* Automatically bisect a broken test case: + ------------ $ cat ~/test.sh #!/bin/sh -make || exit 125 # this skips broken builds -make test # "make test" runs the test suite -$ git bisect start v1.3 v1.1 -- # v1.3 is bad, v1.1 is good +make || exit 125 # this skips broken builds +~/check_test_case.sh # does the test case pass? +$ git bisect start HEAD HEAD~10 -- # culprit is among the last 10 $ git bisect run ~/test.sh ------------ + Here we use a "test.sh" custom script. In this script, if "make" fails, we skip the current commit. +"check_test_case.sh" should "exit 0" if the test case passes, +and "exit 1" otherwise. + -It is safer to use a custom script outside the repository to prevent -interactions between the bisect, make and test processes and the -script. -+ -"make test" should "exit 0", if the test suite passes, and -"exit 1" otherwise. +It is safer if both "test.sh" and "check_test_case.sh" are +outside the repository to prevent interactions between the bisect, +make and test processes and the scripts. -* Automatically bisect a broken test case: +* Automatically bisect with temporary modifications (hot-fix): + ------------ $ cat ~/test.sh #!/bin/sh -make || exit 125 # this skips broken builds -~/check_test_case.sh # does the test case passes ? -$ git bisect start HEAD HEAD~10 -- # culprit is among the last 10 -$ git bisect run ~/test.sh + +# tweak the working tree by merging the hot-fix branch +# and then attempt a build +if git merge --no-commit hot-fix && + make +then + # run project specific test and report its status + ~/check_test_case.sh + status=$? +else + # tell the caller this is untestable + status=125 +fi + +# undo the tweak to allow clean flipping to the next commit +git reset --hard + +# return control +exit $status ------------ + -Here "check_test_case.sh" should "exit 0" if the test case passes, -and "exit 1" otherwise. -+ -It is safer if both "test.sh" and "check_test_case.sh" scripts are -outside the repository to prevent interactions between the bisect, -make and test processes and the scripts. +This applies modifications from a hot-fix branch before each test run, +e.g. in case your build or test environment changed so that older +revisions may need a fix which newer ones have already. (Make sure the +hot-fix branch is based off a commit which is contained in all revisions +which you are bisecting, so that the merge does not pull in too much, or +use `git cherry-pick` instead of `git merge`.) -* Automatically bisect a broken test suite: +* Automatically bisect a broken test case: + ------------ $ git bisect start HEAD HEAD~10 -- # culprit is among the last 10 $ git bisect run sh -c "make || exit 125; ~/check_test_case.sh" ------------ + -Does the same as the previous example, but on a single line. - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation -------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. +This shows that you can do without a run script if you write the test +on a single line. SEE ALSO -------- diff --git a/Documentation/git-blame.txt b/Documentation/git-blame.txt index c71671b4f9..c4d1ff86c9 100644 --- a/Documentation/git-blame.txt +++ b/Documentation/git-blame.txt @@ -198,10 +198,6 @@ SEE ALSO -------- linkgit:git-annotate[1] -AUTHOR ------- -Written by Junio C Hamano <gitster@pobox.com> - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-branch.txt b/Documentation/git-branch.txt index 9106d38e40..c50f189827 100644 --- a/Documentation/git-branch.txt +++ b/Documentation/git-branch.txt @@ -232,14 +232,6 @@ linkgit:git-remote[1], link:user-manual.html#what-is-a-branch[``Understanding history: What is a branch?''] in the Git User's Manual. -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> and Junio C Hamano <gitster@pobox.com> - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-bundle.txt b/Documentation/git-bundle.txt index 299007b206..92b01ec25d 100644 --- a/Documentation/git-bundle.txt +++ b/Documentation/git-bundle.txt @@ -201,10 +201,6 @@ You can also see what references it offers: $ git ls-remote mybundle ---------------- -Author ------- -Written by Mark Levedahl <mdl123@verizon.net> - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-cat-file.txt b/Documentation/git-cat-file.txt index 544ba7ba21..2fb95bbd19 100644 --- a/Documentation/git-cat-file.txt +++ b/Documentation/git-cat-file.txt @@ -100,14 +100,6 @@ for each object specified on stdin that does not exist in the repository: <object> SP missing LF ------------ -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-check-attr.txt b/Documentation/git-check-attr.txt index 50824e3a2d..30eca6cee6 100644 --- a/Documentation/git-check-attr.txt +++ b/Documentation/git-check-attr.txt @@ -86,15 +86,6 @@ SEE ALSO -------- linkgit:gitattributes[5]. - -Author ------- -Written by Junio C Hamano <gitster@pobox.com> - -Documentation --------------- -Documentation by James Bowes. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-checkout-index.txt b/Documentation/git-checkout-index.txt index 0c0a9c14bc..4d33e7be0f 100644 --- a/Documentation/git-checkout-index.txt +++ b/Documentation/git-checkout-index.txt @@ -172,18 +172,6 @@ $ git checkout-index --prefix=.merged- Makefile This will check out the currently cached copy of `Makefile` into the file `.merged-Makefile`. - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - - -Documentation --------------- -Documentation by David Greaves, -Junio C Hamano and the git-list <git@vger.kernel.org>. - - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-checkout.txt b/Documentation/git-checkout.txt index 880763d391..1063f69023 100644 --- a/Documentation/git-checkout.txt +++ b/Documentation/git-checkout.txt @@ -9,6 +9,7 @@ SYNOPSIS -------- [verse] 'git checkout' [-q] [-f] [-m] [<branch>] +'git checkout' [-q] [-f] [-m] [--detach] [<commit>] 'git checkout' [-q] [-f] [-m] [[-b|-B|--orphan] <new_branch>] [<start_point>] 'git checkout' [-f|--ours|--theirs|-m|--conflict=<style>] [<tree-ish>] [--] <paths>... 'git checkout' --patch [<tree-ish>] [--] [<paths>...] @@ -22,9 +23,10 @@ branch. 'git checkout' [<branch>]:: 'git checkout' -b|-B <new_branch> [<start point>]:: +'git checkout' [--detach] [<commit>]:: This form switches branches by updating the index, working - tree, and HEAD to reflect the specified branch. + tree, and HEAD to reflect the specified branch or commit. + If `-b` is given, a new branch is created as if linkgit:git-branch[1] were called and then checked out; in this case you can @@ -115,6 +117,13 @@ explicitly give a name with '-b' in such a case. Create the new branch's reflog; see linkgit:git-branch[1] for details. +--detach:: + Rather than checking out a branch to work on it, check out a + commit for inspection and discardable experiments. + This is the default behavior of "git checkout <commit>" when + <commit> is not a branch name. See the "DETACHED HEAD" section + below for details. + --orphan:: Create a new 'orphan' branch, named <new_branch>, started from <start_point> and switch to it. The first commit made on this @@ -204,42 +213,140 @@ leave out at most one of `A` and `B`, in which case it defaults to `HEAD`. -Detached HEAD +DETACHED HEAD ------------- +HEAD normally refers to a named branch (e.g. 'master'). Meanwhile, each +branch refers to a specific commit. Let's look at a repo with three +commits, one of them tagged, and with branch 'master' checked out: + +------------ + HEAD (refers to branch 'master') + | + v +a---b---c branch 'master' (refers to commit 'c') + ^ + | + tag 'v2.0' (refers to commit 'b') +------------ -It is sometimes useful to be able to 'checkout' a commit that is -not at the tip of one of your branches. The most obvious -example is to check out the commit at a tagged official release -point, like this: +When a commit is created in this state, the branch is updated to refer to +the new commit. Specifically, 'git commit' creates a new commit 'd', whose +parent is commit 'c', and then updates branch 'master' to refer to new +commit 'd'. HEAD still refers to branch 'master' and so indirectly now refers +to commit 'd': ------------ -$ git checkout v2.6.18 +$ edit; git add; git commit + + HEAD (refers to branch 'master') + | + v +a---b---c---d branch 'master' (refers to commit 'd') + ^ + | + tag 'v2.0' (refers to commit 'b') ------------ -Earlier versions of git did not allow this and asked you to -create a temporary branch using the `-b` option, but starting from -version 1.5.0, the above command 'detaches' your HEAD from the -current branch and directly points at the commit named by the tag -(`v2.6.18` in the example above). +It is sometimes useful to be able to checkout a commit that is not at +the tip of any named branch, or even to create a new commit that is not +referenced by a named branch. Let's look at what happens when we +checkout commit 'b' (here we show two ways this may be done): -You can use all git commands while in this state. You can use -`git reset --hard $othercommit` to further move around, for -example. You can make changes and create a new commit on top of -a detached HEAD. You can even create a merge by using `git -merge $othercommit`. +------------ +$ git checkout v2.0 # or +$ git checkout master^^ + + HEAD (refers to commit 'b') + | + v +a---b---c---d branch 'master' (refers to commit 'd') + ^ + | + tag 'v2.0' (refers to commit 'b') +------------ -The state you are in while your HEAD is detached is not recorded -by any branch (which is natural --- you are not on any branch). -What this means is that you can discard your temporary commits -and merges by switching back to an existing branch (e.g. `git -checkout master`), and a later `git prune` or `git gc` would -garbage-collect them. If you did this by mistake, you can ask -the reflog for HEAD where you were, e.g. +Notice that regardless of which checkout command we use, HEAD now refers +directly to commit 'b'. This is known as being in detached HEAD state. +It means simply that HEAD refers to a specific commit, as opposed to +referring to a named branch. Let's see what happens when we create a commit: ------------ -$ git log -g -2 HEAD +$ edit; git add; git commit + + HEAD (refers to commit 'e') + | + v + e + / +a---b---c---d branch 'master' (refers to commit 'd') + ^ + | + tag 'v2.0' (refers to commit 'b') +------------ + +There is now a new commit 'e', but it is referenced only by HEAD. We can +of course add yet another commit in this state: + +------------ +$ edit; git add; git commit + + HEAD (refers to commit 'f') + | + v + e---f + / +a---b---c---d branch 'master' (refers to commit 'd') + ^ + | + tag 'v2.0' (refers to commit 'b') +------------ + +In fact, we can perform all the normal git operations. But, let's look +at what happens when we then checkout master: + +------------ +$ git checkout master + + HEAD (refers to branch 'master') + e---f | + / v +a---b---c---d branch 'master' (refers to commit 'd') + ^ + | + tag 'v2.0' (refers to commit 'b') ------------ +It is important to realize that at this point nothing refers to commit +'f'. Eventually commit 'f' (and by extension commit 'e') will be deleted +by the routine git garbage collection process, unless we create a reference +before that happens. If we have not yet moved away from commit 'f', +any of these will create a reference to it: + +------------ +$ git checkout -b foo <1> +$ git branch foo <2> +$ git tag foo <3> +------------ + +<1> creates a new branch 'foo', which refers to commit 'f', and then +updates HEAD to refer to branch 'foo'. In other words, we'll no longer +be in detached HEAD state after this command. + +<2> similarly creates a new branch 'foo', which refers to commit 'f', +but leaves HEAD detached. + +<3> creates a new tag 'foo', which refers to commit 'f', +leaving HEAD detached. + +If we have moved away from commit 'f', then we must first recover its object +name (typically by using git reflog), and then we can create a reference to +it. For example, to see the last two commits to which HEAD referred, we +can use either of these commands: + +------------ +$ git reflog -2 HEAD # or +$ git log -g -2 HEAD +------------ EXAMPLES -------- @@ -315,15 +422,6 @@ $ edit frotz $ git add frotz ------------ - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-cherry-pick.txt b/Documentation/git-cherry-pick.txt index 749d68a72b..01db83039f 100644 --- a/Documentation/git-cherry-pick.txt +++ b/Documentation/git-cherry-pick.txt @@ -16,6 +16,25 @@ Given one or more existing commits, apply the change each one introduces, recording a new commit for each. This requires your working tree to be clean (no modifications from the HEAD commit). +When it is not obvious how to apply a change, the following +happens: + +1. The current branch and `HEAD` pointer stay at the last commit + successfully made. +2. The `CHERRY_PICK_HEAD` ref is set to point at the commit that + introduced the change that is difficult to apply. +3. Paths in which the change applied cleanly are updated both + in the index file and in your working tree. +4. For conflicting paths, the index file records up to three + versions, as described in the "TRUE MERGE" section of + linkgit:git-merge[1]. The working tree files will include + a description of the conflict bracketed by the usual + conflict markers `<<<<<<<` and `>>>>>>>`. +5. No other modifications are made. + +See linkgit:git-merge[1] for some hints on resolving such +conflicts. + OPTIONS ------- <commit>...:: @@ -152,14 +171,6 @@ the working tree. spending extra time to avoid mistakes based on incorrectly matching context lines. -Author ------- -Written by Junio C Hamano <gitster@pobox.com> - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - SEE ALSO -------- linkgit:git-revert[1] diff --git a/Documentation/git-cherry.txt b/Documentation/git-cherry.txt index fed115acd0..79448c505b 100644 --- a/Documentation/git-cherry.txt +++ b/Documentation/git-cherry.txt @@ -63,14 +63,6 @@ SEE ALSO -------- linkgit:git-patch-id[1] -Author ------- -Written by Junio C Hamano <gitster@pobox.com> - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-citool.txt b/Documentation/git-citool.txt index fb2753c97e..6e5c8126f5 100644 --- a/Documentation/git-citool.txt +++ b/Documentation/git-citool.txt @@ -19,14 +19,6 @@ to the less interactive 'git commit' program. 'git citool' is actually a standard alias for `git gui citool`. See linkgit:git-gui[1] for more details. -Author ------- -Written by Shawn O. Pearce <spearce@spearce.org>. - -Documentation --------------- -Documentation by Shawn O. Pearce <spearce@spearce.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-clean.txt b/Documentation/git-clean.txt index 60e38e6e27..974e04ef1a 100644 --- a/Documentation/git-clean.txt +++ b/Documentation/git-clean.txt @@ -61,12 +61,6 @@ OPTIONS Remove only files ignored by git. This may be useful to rebuild everything from scratch, but keep manually created files. - -Author ------- -Written by Pavel Roskin <proski@gnu.org> - - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-clone.txt b/Documentation/git-clone.txt index 42e7021215..86eb4c9368 100644 --- a/Documentation/git-clone.txt +++ b/Documentation/git-clone.txt @@ -12,6 +12,7 @@ SYNOPSIS 'git clone' [--template=<template_directory>] [-l] [-s] [--no-hardlinks] [-q] [-n] [--bare] [--mirror] [-o <name>] [-b <name>] [-u <upload-pack>] [--reference <repository>] + [--separate-git-dir|-L <git dir>] [--depth <depth>] [--recursive|--recurse-submodules] [--] <repository> [<directory>] @@ -176,6 +177,15 @@ objects from the source repository into a pack in the cloned repository. repository does not have a worktree/checkout (i.e. if any of `--no-checkout`/`-n`, `--bare`, or `--mirror` is given) +-L=<git dir>:: +--separate-git-dir=<git dir>:: + Instead of placing the cloned repository where it is supposed + to be, place the cloned repository at the specified directory, + then make a filesytem-agnostic git symbolic link to there. + The result is git repository can be separated from working + tree. + + <repository>:: The (possibly remote) repository to clone from. See the <<URLS,URLS>> section below for more information on specifying @@ -236,17 +246,6 @@ $ git clone --bare -l -s /pub/scm/.../torvalds/linux-2.6.git \ /pub/scm/.../me/subsys-2.6.git ------------ - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-commit-tree.txt b/Documentation/git-commit-tree.txt index 5dcf4278fc..f524d76019 100644 --- a/Documentation/git-commit-tree.txt +++ b/Documentation/git-commit-tree.txt @@ -93,15 +93,6 @@ SEE ALSO -------- linkgit:git-write-tree[1] - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-commit.txt b/Documentation/git-commit.txt index 8f89f6f08c..d0534b8c05 100644 --- a/Documentation/git-commit.txt +++ b/Documentation/git-commit.txt @@ -84,9 +84,10 @@ OPTIONS linkgit:git-rebase[1] for details. --reset-author:: - When used with -C/-c/--amend options, declare that the - authorship of the resulting commit now belongs of the committer. - This also renews the author timestamp. + When used with -C/-c/--amend options, or when committing after a + a conflicting cherry-pick, declare that the authorship of the + resulting commit now belongs of the committer. This also renews + the author timestamp. --short:: When doing a dry-run, give the output in the short-format. See @@ -396,12 +397,6 @@ linkgit:git-mv[1], linkgit:git-merge[1], linkgit:git-commit-tree[1] -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> and -Junio C Hamano <gitster@pobox.com> - - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-config.txt b/Documentation/git-config.txt index 543dd64a46..8804de327f 100644 --- a/Documentation/git-config.txt +++ b/Documentation/git-config.txt @@ -336,15 +336,6 @@ echo "${WS}your whitespace color or blue reverse${RESET}" include::config.txt[] - -Author ------- -Written by Johannes Schindelin <Johannes.Schindelin@gmx.de> - -Documentation --------------- -Documentation by Johannes Schindelin, Petr Baudis and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-count-objects.txt b/Documentation/git-count-objects.txt index 6bc1c21e62..a73933a931 100644 --- a/Documentation/git-count-objects.txt +++ b/Documentation/git-count-objects.txt @@ -25,15 +25,6 @@ OPTIONS and number of objects that can be removed by running `git prune-packed`. - -Author ------- -Written by Junio C Hamano <gitster@pobox.com> - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-cvsexportcommit.txt b/Documentation/git-cvsexportcommit.txt index d25661eb21..ad93a3e84e 100644 --- a/Documentation/git-cvsexportcommit.txt +++ b/Documentation/git-cvsexportcommit.txt @@ -112,14 +112,6 @@ $ cd ~/project_cvs_checkout $ git cherry cvshead myhead | sed -n 's/^+ //p' | xargs -l1 git cvsexportcommit -c -p -v ------------ -Author ------- -Written by Martin Langhoff <martin@laptop.org> and others. - -Documentation --------------- -Documentation by Martin Langhoff <martin@laptop.org> and others. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-cvsimport.txt b/Documentation/git-cvsimport.txt index 608cd63fc3..6695ab3b4b 100644 --- a/Documentation/git-cvsimport.txt +++ b/Documentation/git-cvsimport.txt @@ -217,15 +217,6 @@ more stable in practice: * cvs2git (part of cvs2svn), `http://cvs2svn.tigris.org` * parsecvs, `http://cgit.freedesktop.org/~keithp/parsecvs` -Author ------- -Written by Matthias Urlichs <smurf@smurf.noris.de>, with help from -various participants of the git-list <git@vger.kernel.org>. - -Documentation --------------- -Documentation by Matthias Urlichs <smurf@smurf.noris.de>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-cvsserver.txt b/Documentation/git-cvsserver.txt index 70cbb2cae7..88d814af0e 100644 --- a/Documentation/git-cvsserver.txt +++ b/Documentation/git-cvsserver.txt @@ -391,22 +391,6 @@ Dependencies ------------ 'git-cvsserver' depends on DBD::SQLite. -Copyright and Authors ---------------------- - -This program is copyright The Open University UK - 2006. - -Authors: - -- Martyn Smith <martyn@catalyst.net.nz> -- Martin Langhoff <martin@laptop.org> - -with ideas and patches from participants of the git-list <git@vger.kernel.org>. - -Documentation --------------- -Documentation by Martyn Smith <martyn@catalyst.net.nz>, Martin Langhoff <martin@laptop.org>, and Matthias Urlichs <smurf@smurf.noris.de>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-daemon.txt b/Documentation/git-daemon.txt index d15cb6a845..ebd13be72e 100644 --- a/Documentation/git-daemon.txt +++ b/Documentation/git-daemon.txt @@ -279,17 +279,6 @@ that connected to it, if the IP address is available. REMOTE_ADDR will be available in the environment of hooks called when services are performed. - - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org>, YOSHIFUJI Hideaki -<yoshfuji@linux-ipv6.org> and the git-list <git@vger.kernel.org> - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-describe.txt b/Documentation/git-describe.txt index 02e015ad9c..039cce2e98 100644 --- a/Documentation/git-describe.txt +++ b/Documentation/git-describe.txt @@ -156,17 +156,6 @@ selected and output. Here fewest commits different is defined as the number of commits which would be shown by `git log tag..input` will be the smallest number of commits possible. - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org>, but somewhat -butchered by Junio C Hamano <gitster@pobox.com>. Later significantly -updated by Shawn Pearce <spearce@spearce.org>. - -Documentation --------------- -Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-diff-files.txt b/Documentation/git-diff-files.txt index 9cd8ccef37..8d481948bd 100644 --- a/Documentation/git-diff-files.txt +++ b/Documentation/git-diff-files.txt @@ -46,15 +46,6 @@ omit diff output for unmerged entries and just show "Unmerged". include::diff-format.txt[] - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-diff-index.txt b/Documentation/git-diff-index.txt index 162cb741b3..6d18486402 100644 --- a/Documentation/git-diff-index.txt +++ b/Documentation/git-diff-index.txt @@ -116,15 +116,6 @@ tell which file is in which state, since the "has been updated" ones show a valid sha1, and the "not in sync with the index" ones will always have the special all-zero sha1. - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-diff-tree.txt b/Documentation/git-diff-tree.txt index a7e37b875f..4e5f127efa 100644 --- a/Documentation/git-diff-tree.txt +++ b/Documentation/git-diff-tree.txt @@ -162,15 +162,6 @@ in case you care). include::diff-format.txt[] - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-diff.txt b/Documentation/git-diff.txt index 49105102db..f8d0819113 100644 --- a/Documentation/git-diff.txt +++ b/Documentation/git-diff.txt @@ -174,14 +174,6 @@ linkgit:gitdiffcore[7], linkgit:git-format-patch[1], linkgit:git-apply[1] -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-difftool.txt b/Documentation/git-difftool.txt index db87f1d423..590f410abf 100644 --- a/Documentation/git-difftool.txt +++ b/Documentation/git-difftool.txt @@ -31,8 +31,8 @@ OPTIONS --tool=<tool>:: Use the diff tool specified by <tool>. Valid merge tools are: - kdiff3, kompare, tkdiff, meld, xxdiff, emerge, vimdiff, gvimdiff, - ecmerge, diffuse, opendiff, p4merge and araxis. + araxis, bc3, diffuse, emerge, ecmerge, gvimdiff, kdiff3, + kompare, meld, opendiff, p4merge, tkdiff, vimdiff and xxdiff. + If a diff tool is not specified, 'git difftool' will use the configuration variable `diff.tool`. If the @@ -109,15 +109,6 @@ linkgit:git-mergetool[1]:: linkgit:git-config[1]:: Get and set repository or global options - -AUTHOR ------- -Written by David Aguilar <davvid@gmail.com>. - -Documentation --------------- -Documentation by David Aguilar and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-fast-export.txt b/Documentation/git-fast-export.txt index e05b686b1e..781bd6edc3 100644 --- a/Documentation/git-fast-export.txt +++ b/Documentation/git-fast-export.txt @@ -135,15 +135,6 @@ Since 'git fast-import' cannot tag trees, you will not be able to export the linux-2.6.git repository completely, as it contains a tag referencing a tree instead of a commit. - -Author ------- -Written by Johannes E. Schindelin <johannes.schindelin@gmx.de>. - -Documentation --------------- -Documentation by Johannes E. Schindelin <johannes.schindelin@gmx.de>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-fast-import.txt b/Documentation/git-fast-import.txt index e1b7a0f9ec..2c2ea12c5c 100644 --- a/Documentation/git-fast-import.txt +++ b/Documentation/git-fast-import.txt @@ -1350,14 +1350,6 @@ operator can use this facility to peek at the objects and refs from an import in progress, at the cost of some added running time and worse compression. -Author ------- -Written by Shawn O. Pearce <spearce@spearce.org>. - -Documentation --------------- -Documentation by Shawn O. Pearce <spearce@spearce.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-fetch-pack.txt b/Documentation/git-fetch-pack.txt index 4a8487c154..48d4bf6d68 100644 --- a/Documentation/git-fetch-pack.txt +++ b/Documentation/git-fetch-pack.txt @@ -90,15 +90,6 @@ OPTIONS $GIT_DIR (e.g. "HEAD", "refs/heads/master"). When unspecified, update from all heads the remote side has. - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by Junio C Hamano. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-fetch.txt b/Documentation/git-fetch.txt index c76e313923..60ac8d26eb 100644 --- a/Documentation/git-fetch.txt +++ b/Documentation/git-fetch.txt @@ -34,7 +34,7 @@ pointed by remote tags that it does not yet have, then fetch those missing tags. If the other end has tags that point at branches you are not interested in, you will not get them. -'git fetch' can fetch from either a single named repository, or +'git fetch' can fetch from either a single named repository, or from several repositories at once if <group> is given and there is a remotes.<group> entry in the configuration file. (See linkgit:git-config[1]). @@ -76,20 +76,19 @@ The `pu` branch will be updated even if it is does not fast-forward, because it is prefixed with a plus sign; `tmp` will not be. +BUGS +---- +Using --recurse-submodules can only fetch new commits in already checked +out submodules right now. When e.g. upstream added a new submodule in the +just fetched commits of the superproject the submodule itself can not be +fetched, making it impossible to check out that submodule later without +having to do a fetch again. This is expected to be fixed in a future git +version. + SEE ALSO -------- linkgit:git-pull[1] - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> and -Junio C Hamano <gitster@pobox.com> - -Documentation -------------- -Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-filter-branch.txt b/Documentation/git-filter-branch.txt index 796e7489ff..9dc1f2a947 100644 --- a/Documentation/git-filter-branch.txt +++ b/Documentation/git-filter-branch.txt @@ -361,7 +361,7 @@ git filter-branch --index-filter \ 'git ls-files -s | sed "s-\t\"*-&newsubdir/-" | GIT_INDEX_FILE=$GIT_INDEX_FILE.new \ git update-index --index-info && - mv $GIT_INDEX_FILE.new $GIT_INDEX_FILE' HEAD + mv "$GIT_INDEX_FILE.new" "$GIT_INDEX_FILE"' HEAD --------------------------------------------------------------- @@ -405,16 +405,6 @@ warned. (or if your git-gc is not new enough to support arguments to `\--prune`, use `git repack -ad; git prune` instead). - -Author ------- -Written by Petr "Pasky" Baudis <pasky@suse.cz>, -and the git list <git@vger.kernel.org> - -Documentation --------------- -Documentation by Petr Baudis and the git list. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-fmt-merge-msg.txt b/Documentation/git-fmt-merge-msg.txt index 75adf7a502..32aff954a2 100644 --- a/Documentation/git-fmt-merge-msg.txt +++ b/Documentation/git-fmt-merge-msg.txt @@ -67,15 +67,6 @@ SEE ALSO -------- linkgit:git-merge[1] - -Author ------- -Written by Junio C Hamano <gitster@pobox.com> - -Documentation --------------- -Documentation by Petr Baudis, Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-for-each-ref.txt b/Documentation/git-for-each-ref.txt index fac1cf55e5..152e695c81 100644 --- a/Documentation/git-for-each-ref.txt +++ b/Documentation/git-for-each-ref.txt @@ -123,7 +123,7 @@ EXAMPLES -------- An example directly producing formatted text. Show the most recent -3 tagged commits:: +3 tagged commits: ------------ #!/bin/sh @@ -140,7 +140,7 @@ Ref: %(*refname) A simple example showing the use of shell eval on the output, -demonstrating the use of --shell. List the prefixes of all heads:: +demonstrating the use of --shell. List the prefixes of all heads: ------------ #!/bin/sh @@ -154,7 +154,7 @@ done A bit more elaborate report on tags, demonstrating that the format -may be an entire script:: +may be an entire script: ------------ #!/bin/sh @@ -204,3 +204,15 @@ eval=`git for-each-ref --shell --format="$fmt" \ refs/tags` eval "$eval" ------------ + +Author +------ +Written by Junio C Hamano <gitster@pobox.com>. + +Documentation +------------- +Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. + +GIT +--- +Part of the linkgit:git[1] suite diff --git a/Documentation/git-format-patch.txt b/Documentation/git-format-patch.txt index 9dcafc6d44..a5525e9aa8 100644 --- a/Documentation/git-format-patch.txt +++ b/Documentation/git-format-patch.txt @@ -278,15 +278,6 @@ SEE ALSO -------- linkgit:git-am[1], linkgit:git-send-email[1] - -Author ------- -Written by Junio C Hamano <gitster@pobox.com> - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-fsck-objects.txt b/Documentation/git-fsck-objects.txt index 965a8279c1..90ebb8a594 100644 --- a/Documentation/git-fsck-objects.txt +++ b/Documentation/git-fsck-objects.txt @@ -15,3 +15,7 @@ DESCRIPTION This is a synonym for linkgit:git-fsck[1]. Please refer to the documentation of that command. + +GIT +--- +Part of the linkgit:git[1] suite diff --git a/Documentation/git-fsck.txt b/Documentation/git-fsck.txt index 86f9b2bf91..c9ede794b0 100644 --- a/Documentation/git-fsck.txt +++ b/Documentation/git-fsck.txt @@ -140,14 +140,6 @@ GIT_INDEX_FILE:: GIT_ALTERNATE_OBJECT_DIRECTORIES:: used to specify additional object database roots (usually unset) -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-gc.txt b/Documentation/git-gc.txt index 26632414b2..4966cb5784 100644 --- a/Documentation/git-gc.txt +++ b/Documentation/git-gc.txt @@ -151,10 +151,6 @@ linkgit:git-reflog[1] linkgit:git-repack[1] linkgit:git-rerere[1] -Author ------- -Written by Shawn O. Pearce <spearce@spearce.org> - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-get-tar-commit-id.txt b/Documentation/git-get-tar-commit-id.txt index 790af9573b..8035736c96 100644 --- a/Documentation/git-get-tar-commit-id.txt +++ b/Documentation/git-get-tar-commit-id.txt @@ -22,15 +22,6 @@ return code of 1. This can happen if <tarfile> had not been created using 'git archive' or if the first parameter of 'git archive' had been a tree ID instead of a commit ID or tag. - -Author ------- -Written by Rene Scharfe <rene.scharfe@lsrfire.ath.cx> - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-grep.txt b/Documentation/git-grep.txt index dab0a78fa8..d7523b3e45 100644 --- a/Documentation/git-grep.txt +++ b/Documentation/git-grep.txt @@ -31,6 +31,16 @@ Look for specified patterns in the tracked files in the work tree, blobs registered in the index file, or blobs in given tree objects. +CONFIGURATION +------------- + +grep.lineNumber:: + If set to true, enable '-n' option by default. + +grep.extendedRegexp:: + If set to true, enable '--extended-regexp' option by default. + + OPTIONS ------- --cached:: @@ -93,6 +103,7 @@ OPTIONS as a regex). -n:: +--line-number:: Prefix the line number to matching lines. -l:: @@ -203,16 +214,6 @@ git grep --all-match -e NODE -e Unexpected:: Looks for a line that has `NODE` or `Unexpected` in files that have lines that match both. -Author ------- -Originally written by Linus Torvalds <torvalds@osdl.org>, later -revamped by Junio C Hamano. - - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-gui.txt b/Documentation/git-gui.txt index 2563710b56..32a833e0ae 100644 --- a/Documentation/git-gui.txt +++ b/Documentation/git-gui.txt @@ -121,14 +121,6 @@ or or browsed online at http://repo.or.cz/w/git-gui.git/[]. -Author ------- -Written by Shawn O. Pearce <spearce@spearce.org>. - -Documentation --------------- -Documentation by Shawn O. Pearce <spearce@spearce.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-hash-object.txt b/Documentation/git-hash-object.txt index 51edeecbe5..4b0a502e8e 100644 --- a/Documentation/git-hash-object.txt +++ b/Documentation/git-hash-object.txt @@ -53,14 +53,6 @@ OPTIONS conversion. If the file is read from standard input then this is always implied, unless the --path option is given. -Author ------- -Written by Junio C Hamano <gitster@pobox.com> - -Documentation --------------- -Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-help.txt b/Documentation/git-help.txt index eccd0ffd38..42aa2b0c01 100644 --- a/Documentation/git-help.txt +++ b/Documentation/git-help.txt @@ -171,17 +171,6 @@ $ git config --global web.browser firefox as they are probably more user specific than repository specific. See linkgit:git-config[1] for more information about this. -Author ------- -Written by Junio C Hamano <gitster@pobox.com> and the git-list -<git@vger.kernel.org>. - -Documentation -------------- -Initial documentation was part of the linkgit:git[1] man page. -Christian Couder <chriscool@tuxfamily.org> extracted and rewrote it a -little. Maintenance is done by the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-http-fetch.txt b/Documentation/git-http-fetch.txt index d91cb7ff85..fefa752198 100644 --- a/Documentation/git-http-fetch.txt +++ b/Documentation/git-http-fetch.txt @@ -43,14 +43,6 @@ commit-id:: Verify that everything reachable from target is fetched. Used after an earlier fetch is interrupted. -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-http-push.txt b/Documentation/git-http-push.txt index ddf7a18dc4..82ae34b9b8 100644 --- a/Documentation/git-http-push.txt +++ b/Documentation/git-http-push.txt @@ -91,15 +91,6 @@ With '--force', the fast-forward check is disabled for all refs. Optionally, a <ref> parameter can be prefixed with a plus '+' sign to disable the fast-forward check only on that ref. - -Author ------- -Written by Nick Hengeveld <nickh@reactrix.com> - -Documentation --------------- -Documentation by Nick Hengeveld - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-imap-send.txt b/Documentation/git-imap-send.txt index 57aba42e66..d3013d6a29 100644 --- a/Documentation/git-imap-send.txt +++ b/Documentation/git-imap-send.txt @@ -124,14 +124,6 @@ Thunderbird in particular is known to be problematic. Thunderbird users may wish to visit this web page for more information: http://kb.mozillazine.org/Plain_text_e-mail_-_Thunderbird#Completely_plain_email -Author ------- -Derived from isync 1.0.1 by Mike McCormack. - -Documentation --------------- -Documentation by Mike McCormack - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-index-pack.txt b/Documentation/git-index-pack.txt index c2bb81042c..909687fed4 100644 --- a/Documentation/git-index-pack.txt +++ b/Documentation/git-index-pack.txt @@ -85,15 +85,6 @@ new .keep file was successfully created. This is useful to remove a .keep file used as a lock to prevent the race with 'git repack' mentioned above. - -Author ------- -Written by Sergey Vlasov <vsu@altlinux.ru> - -Documentation -------------- -Documentation by Sergey Vlasov - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-init-db.txt b/Documentation/git-init-db.txt index eba3cb4998..2c4c716f33 100644 --- a/Documentation/git-init-db.txt +++ b/Documentation/git-init-db.txt @@ -16,3 +16,7 @@ DESCRIPTION This is a synonym for linkgit:git-init[1]. Please refer to the documentation of that command. + +GIT +--- +Part of the linkgit:git[1] suite diff --git a/Documentation/git-init.txt b/Documentation/git-init.txt index 00d4a124c9..58cd01145a 100644 --- a/Documentation/git-init.txt +++ b/Documentation/git-init.txt @@ -8,9 +8,32 @@ git-init - Create an empty git repository or reinitialize an existing one SYNOPSIS -------- -'git init' [-q | --quiet] [--bare] [--template=<template_directory>] [--shared[=<permissions>]] [directory] +'git init' [-q | --quiet] [--bare] [--template=<template_directory>] + [--separate-git-dir|-L <git dir>] + [--shared[=<permissions>]] [directory] +DESCRIPTION +----------- + +This command creates an empty git repository - basically a `.git` +directory with subdirectories for `objects`, `refs/heads`, +`refs/tags`, and template files. An initial `HEAD` file that +references the HEAD of the master branch is also created. + +If the `$GIT_DIR` environment variable is set then it specifies a path +to use instead of `./.git` for the base of the repository. + +If the object storage directory is specified via the +`$GIT_OBJECT_DIRECTORY` environment variable then the sha1 directories +are created underneath - otherwise the default `$GIT_DIR/objects` +directory is used. + +Running 'git init' in an existing repository is safe. It will not +overwrite things that are already there. The primary reason for +rerunning 'git init' is to pick up newly added templates (or to move +the repository to another place if --separate-git-dir is given). + OPTIONS ------- @@ -31,6 +54,16 @@ current working directory. Specify the directory from which templates will be used. (See the "TEMPLATE DIRECTORY" section below.) +-L=<git dir>:: +--separate-git-dir=<git dir>:: + +Instead of initializing the repository where it is supposed to be, +place a filesytem-agnostic git symbolic link there, pointing to the +specified git path, and initialize a git repository at the path. The +result is git repository can be separated from working tree. If this +is reinitialization, the repository will be moved to the specified +path. + --shared[=(false|true|umask|group|all|world|everybody|0xxx)]:: Specify that the git repository is to be shared amongst several users. This @@ -74,32 +107,6 @@ line, the command is run inside the directory (possibly after creating it). -- -DESCRIPTION ------------ -This command creates an empty git repository - basically a `.git` directory -with subdirectories for `objects`, `refs/heads`, `refs/tags`, and -template files. -An initial `HEAD` file that references the HEAD of the master branch -is also created. - -If the `$GIT_DIR` environment variable is set then it specifies a path -to use instead of `./.git` for the base of the repository. - -If the object storage directory is specified via the `$GIT_OBJECT_DIRECTORY` -environment variable then the sha1 directories are created underneath - -otherwise the default `$GIT_DIR/objects` directory is used. - -Running 'git init' in an existing repository is safe. It will not overwrite -things that are already there. The primary reason for rerunning 'git init' -is to pick up newly added templates. - -Note that 'git init' is the same as 'git init-db'. The command -was primarily meant to initialize the object database, but over -time it has become responsible for setting up the other aspects -of the repository, such as installing the default hooks and -setting the configuration variables. The old name is retained -for backward compatibility reasons. - TEMPLATE DIRECTORY ------------------ @@ -134,15 +141,6 @@ $ git add . <2> <1> prepare /path/to/my/codebase/.git directory <2> add all existing file to the index - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-instaweb.txt b/Documentation/git-instaweb.txt index 7477ce8fa8..08f85ba046 100644 --- a/Documentation/git-instaweb.txt +++ b/Documentation/git-instaweb.txt @@ -84,14 +84,6 @@ If the configuration variable 'instaweb.browser' is not set, 'web.browser' will be used instead if it is defined. See linkgit:git-web{litdd}browse[1] for more information about this. -Author ------- -Written by Eric Wong <normalperson@yhbt.net> - -Documentation --------------- -Documentation by Eric Wong <normalperson@yhbt.net>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-log.txt b/Documentation/git-log.txt index ff41784c60..2c84028838 100644 --- a/Documentation/git-log.txt +++ b/Documentation/git-log.txt @@ -25,6 +25,7 @@ OPTIONS -<n>:: Limits the number of commits to show. + Note that this is a commit limiting option, see below. <since>..<until>:: Show only commits between the named two commits. When @@ -72,16 +73,16 @@ produced by --stat etc. to be prefixed with "\-- " to separate them from options or refnames. +include::rev-list-options.txt[] + +include::pretty-formats.txt[] + Common diff options -~~~~~~~~~~~~~~~~~~~ +------------------- :git-log: 1 include::diff-options.txt[] -include::rev-list-options.txt[] - -include::pretty-formats.txt[] - include::diff-generate-patch.txt[] Examples @@ -181,14 +182,6 @@ This setting can be disabled by the `--no-standard-notes` option, overridden by the 'GIT_NOTES_DISPLAY_REF' environment variable, and supplemented by the `--show-notes` option. -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-lost-found.txt b/Documentation/git-lost-found.txt index 602b8d5d4d..adf7e1c055 100644 --- a/Documentation/git-lost-found.txt +++ b/Documentation/git-lost-found.txt @@ -67,15 +67,6 @@ $ git rev-parse not-lost-anymore 1ef2b196d909eed523d4f3c9bf54b78cdd6843c6 ------------ -Author ------- -Written by Junio C Hamano <gitster@pobox.com> - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-ls-files.txt b/Documentation/git-ls-files.txt index 86abd13451..4b28292811 100644 --- a/Documentation/git-ls-files.txt +++ b/Documentation/git-ls-files.txt @@ -209,15 +209,6 @@ SEE ALSO -------- linkgit:git-read-tree[1], linkgit:gitignore[5] - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by David Greaves, Junio C Hamano, Josh Triplett, and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-ls-remote.txt b/Documentation/git-ls-remote.txt index abe7bf9ff9..c3df8c0ebe 100644 --- a/Documentation/git-ls-remote.txt +++ b/Documentation/git-ls-remote.txt @@ -10,7 +10,7 @@ SYNOPSIS -------- [verse] 'git ls-remote' [--heads] [--tags] [-u <exec> | --upload-pack <exec>] - <repository> <refs>... + <repository> [<refs>...] DESCRIPTION ----------- @@ -67,10 +67,6 @@ EXAMPLES c5db5456ae3b0873fc659c19fafdde22313cc441 refs/tags/v0.99.2 7ceca275d047c90c0c7d5afb13ab97efdf51bd6e refs/tags/v0.99.3 -Author ------- -Written by Junio C Hamano <gitster@pobox.com> - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-ls-tree.txt b/Documentation/git-ls-tree.txt index 76ed625e7b..16e87fd6dd 100644 --- a/Documentation/git-ls-tree.txt +++ b/Documentation/git-ls-tree.txt @@ -95,18 +95,6 @@ Object size identified by <object> is given in bytes, and right-justified with minimum width of 7 characters. Object size is given only for blobs (file) entries; for other entries `-` character is used in place of size. - -Author ------- -Written by Petr Baudis <pasky@suse.cz> -Completely rewritten from scratch by Junio C Hamano <gitster@pobox.com>, -another major rewrite by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by David Greaves, Junio C Hamano and the git-list -<git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-mailinfo.txt b/Documentation/git-mailinfo.txt index 3ea5aad56c..ed45662cc9 100644 --- a/Documentation/git-mailinfo.txt +++ b/Documentation/git-mailinfo.txt @@ -80,17 +80,6 @@ This can enabled by default with the configuration option mailinfo.scissors. <patch>:: The patch extracted from e-mail. - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> and -Junio C Hamano <gitster@pobox.com> - - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-mailsplit.txt b/Documentation/git-mailsplit.txt index 71912a19a4..9b2049d674 100644 --- a/Documentation/git-mailsplit.txt +++ b/Documentation/git-mailsplit.txt @@ -46,16 +46,6 @@ OPTIONS --keep-cr:: Do not remove `\r` from lines ending with `\r\n`. -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> -and Junio C Hamano <gitster@pobox.com> - - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-merge-base.txt b/Documentation/git-merge-base.txt index eedef1bb1a..ba36ec04f4 100644 --- a/Documentation/git-merge-base.txt +++ b/Documentation/git-merge-base.txt @@ -102,14 +102,6 @@ both '1' and '2' are merge-bases of A and B. Neither one is better than the other (both are 'best' merge bases). When the `--all` option is not given, it is unspecified which best one is output. -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. - See also -------- linkgit:git-rev-list[1], diff --git a/Documentation/git-merge-file.txt b/Documentation/git-merge-file.txt index f334d694e0..635c66956e 100644 --- a/Documentation/git-merge-file.txt +++ b/Documentation/git-merge-file.txt @@ -86,17 +86,6 @@ git merge-file -L a -L b -L c tmp/a123 tmp/b234 tmp/c345:: merges tmp/a123 and tmp/c345 with the base tmp/b234, but uses labels `a` and `c` instead of `tmp/a123` and `tmp/c345`. - -Author ------- -Written by Johannes Schindelin <johannes.schindelin@gmx.de> - - -Documentation --------------- -Documentation by Johannes Schindelin and the git-list <git@vger.kernel.org>, -with parts copied from the original documentation of RCS 'merge'. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-merge-index.txt b/Documentation/git-merge-index.txt index 921b38f183..6ce54673b0 100644 --- a/Documentation/git-merge-index.txt +++ b/Documentation/git-merge-index.txt @@ -73,15 +73,6 @@ merge once anything has returned an error (i.e., `cat` returned an error for the AA file, because it didn't exist in the original, and thus 'git merge-index' didn't even try to merge the MM thing). -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> -One-shot merge by Petr Baudis <pasky@ucw.cz> - -Documentation --------------- -Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-merge-one-file.txt b/Documentation/git-merge-one-file.txt index a163cfca69..ee059def79 100644 --- a/Documentation/git-merge-one-file.txt +++ b/Documentation/git-merge-one-file.txt @@ -15,15 +15,6 @@ DESCRIPTION This is the standard helper program to use with 'git merge-index' to resolve a merge after the trivial merge done with 'git read-tree -m'. -Author ------- -Written by Linus Torvalds <torvalds@osdl.org>, -Junio C Hamano <gitster@pobox.com> and Petr Baudis <pasky@suse.cz>. - -Documentation --------------- -Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-merge-tree.txt b/Documentation/git-merge-tree.txt index f869a7f00f..3bfa7b4220 100644 --- a/Documentation/git-merge-tree.txt +++ b/Documentation/git-merge-tree.txt @@ -23,14 +23,6 @@ merge results outside of the index, and stuff the results back into the index. For this reason, the output from the command omits entries that match the <branch1> tree. -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-merge.txt b/Documentation/git-merge.txt index c1efaaa5c5..e2e6aba17e 100644 --- a/Documentation/git-merge.txt +++ b/Documentation/git-merge.txt @@ -11,7 +11,7 @@ SYNOPSIS [verse] 'git merge' [-n] [--stat] [--no-commit] [--squash] [-s <strategy>] [-X <strategy-option>] - [--[no-]rerere-autoupdate] [-m <msg>] <commit>... + [--[no-]rerere-autoupdate] [-m <msg>] [<commit>...] 'git merge' <msg> HEAD <commit>... 'git merge' --abort @@ -95,8 +95,13 @@ commit or stash your changes before running 'git merge'. <commit>...:: Commits, usually other branch heads, to merge into our branch. - You need at least one <commit>. Specifying more than one - <commit> obviously means you are trying an Octopus. + Specifying more than one commit will create a merge with + more than two parents (affectionately called an Octopus merge). ++ +If no commit is given from the command line, and if `merge.defaultToUpstream` +configuration variable is set, merge the remote tracking branches +that the current branch is configured to use as its upstream. +See also the configuration section of this manual page. PRE-MERGE CHECKS @@ -312,15 +317,6 @@ linkgit:git-diff[1], linkgit:git-ls-files[1], linkgit:git-add[1], linkgit:git-rm[1], linkgit:git-mergetool[1] -Author ------- -Written by Junio C Hamano <gitster@pobox.com> - - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-mergetool--lib.txt b/Documentation/git-mergetool--lib.txt index d8df55362c..63ededec1d 100644 --- a/Documentation/git-mergetool--lib.txt +++ b/Documentation/git-mergetool--lib.txt @@ -41,14 +41,6 @@ run_merge_tool:: '$MERGED', '$LOCAL', '$REMOTE', and '$BASE' must be defined for use by the merge tool. -Author ------- -Written by David Aguilar <davvid@gmail.com> - -Documentation --------------- -Documentation by David Aguilar and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-mergetool.txt b/Documentation/git-mergetool.txt index 1f75a848ba..8c79ae8d2a 100644 --- a/Documentation/git-mergetool.txt +++ b/Documentation/git-mergetool.txt @@ -26,8 +26,8 @@ OPTIONS --tool=<tool>:: Use the merge resolution program specified by <tool>. Valid merge tools are: - kdiff3, tkdiff, meld, xxdiff, emerge, vimdiff, gvimdiff, ecmerge, - diffuse, tortoisemerge, opendiff, p4merge and araxis. + araxis, bc3, diffuse, ecmerge, emerge, gvimdiff, kdiff3, + meld, opendiff, p4merge, tkdiff, tortoisemerge, vimdiff and xxdiff. + If a merge resolution program is not specified, 'git mergetool' will use the configuration variable `merge.tool`. If the @@ -82,14 +82,6 @@ Setting the `mergetool.keepBackup` configuration variable to `false` causes `git mergetool` to automatically remove the backup as files are successfully merged. -Author ------- -Written by Theodore Y Ts'o <tytso@mit.edu> - -Documentation --------------- -Documentation by Theodore Y Ts'o. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-mktag.txt b/Documentation/git-mktag.txt index 8bcc11443d..037ab1045d 100644 --- a/Documentation/git-mktag.txt +++ b/Documentation/git-mktag.txt @@ -32,15 +32,6 @@ exists, is separated by a blank line from the header. The message part may contain a signature that git itself doesn't care about, but that can be verified with gpg. - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-mktree.txt b/Documentation/git-mktree.txt index 81e3326772..afe21be64d 100644 --- a/Documentation/git-mktree.txt +++ b/Documentation/git-mktree.txt @@ -34,14 +34,6 @@ OPTIONS optional. Note - if the '-z' option is used, lines are terminated with NUL. -Author ------- -Written by Junio C Hamano <gitster@pobox.com> - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-mv.txt b/Documentation/git-mv.txt index bdcb58526e..db0e030d69 100644 --- a/Documentation/git-mv.txt +++ b/Documentation/git-mv.txt @@ -39,17 +39,6 @@ OPTIONS --dry-run:: Do nothing; only show what would happen - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> -Rewritten by Ryan Anderson <ryan@michonline.com> -Move functionality added by Josef Weidendorfer <Josef.Weidendorfer@gmx.de> - -Documentation --------------- -Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-name-rev.txt b/Documentation/git-name-rev.txt index 2108237c36..ad1d1468c9 100644 --- a/Documentation/git-name-rev.txt +++ b/Documentation/git-name-rev.txt @@ -70,15 +70,6 @@ Another nice thing you can do is: % git log | git name-rev --stdin ------------ - -Author ------- -Written by Johannes Schindelin <Johannes.Schindelin@gmx.de> - -Documentation --------------- -Documentation by Johannes Schindelin. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-pack-objects.txt b/Documentation/git-pack-objects.txt index 65eff66afe..20c8551d6a 100644 --- a/Documentation/git-pack-objects.txt +++ b/Documentation/git-pack-objects.txt @@ -115,7 +115,7 @@ base-name:: --honor-pack-keep:: This flag causes an object already in a local pack that - has a .keep file to be ignored, even if it it would have + has a .keep file to be ignored, even if it would have otherwise been packed. --incremental:: @@ -190,15 +190,20 @@ self-contained. Use `git index-pack --fix-thin` (see linkgit:git-index-pack[1]) to restore the self-contained property. --delta-base-offset:: - A packed archive can express base object of a delta as - either 20-byte object name or as an offset in the - stream, but older version of git does not understand the + A packed archive can express the base object of a delta as + either a 20-byte object name or as an offset in the + stream, but ancient versions of git don't understand the latter. By default, 'git pack-objects' only uses the former format for better compatibility. This option allows the command to use the latter format for compactness. Depending on the average delta chain length, this option typically shrinks the resulting packfile by 3-5 per-cent. ++ +Note: Porcelain commands such as `git gc` (see linkgit:git-gc[1]), +`git repack` (see linkgit:git-repack[1]) pass this option by default +in modern git when they put objects in your repository into pack files. +So does `git bundle` (see linkgit:git-bundle[1]) when it creates a bundle. --threads=<n>:: Specifies the number of threads to spawn when searching for best @@ -219,15 +224,6 @@ self-contained. Use `git index-pack --fix-thin` With this option, parents that are hidden by grafts are packed nevertheless. - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation -------------- -Documentation by Junio C Hamano - SEE ALSO -------- linkgit:git-rev-list[1] diff --git a/Documentation/git-pack-redundant.txt b/Documentation/git-pack-redundant.txt index d0607879db..db9f0f7055 100644 --- a/Documentation/git-pack-redundant.txt +++ b/Documentation/git-pack-redundant.txt @@ -38,14 +38,6 @@ OPTIONS --verbose:: Outputs some statistics to stderr. Has a small performance penalty. -Author ------- -Written by Lukas Sandström <lukass@etek.chalmers.se> - -Documentation --------------- -Documentation by Lukas Sandström <lukass@etek.chalmers.se> - SEE ALSO -------- linkgit:git-pack-objects[1] diff --git a/Documentation/git-pack-refs.txt b/Documentation/git-pack-refs.txt index 1ee99c208c..54b92534ce 100644 --- a/Documentation/git-pack-refs.txt +++ b/Documentation/git-pack-refs.txt @@ -56,11 +56,6 @@ a repository with many branches of historical interests. The command usually removes loose refs under `$GIT_DIR/refs` hierarchy after packing them. This option tells it not to. - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-parse-remote.txt b/Documentation/git-parse-remote.txt index 39d9daa7e0..02217f6ba2 100644 --- a/Documentation/git-parse-remote.txt +++ b/Documentation/git-parse-remote.txt @@ -17,14 +17,6 @@ routines to parse files under $GIT_DIR/remotes/ and $GIT_DIR/branches/ and configuration variables that are related to fetching, pulling and pushing. -Author ------- -Written by Junio C Hamano. - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-patch-id.txt b/Documentation/git-patch-id.txt index 4dae1390a5..50e26f43c1 100644 --- a/Documentation/git-patch-id.txt +++ b/Documentation/git-patch-id.txt @@ -29,14 +29,6 @@ OPTIONS <patch>:: The diff to create the ID of. -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-peek-remote.txt b/Documentation/git-peek-remote.txt index 87dacd797f..a34d62f0da 100644 --- a/Documentation/git-peek-remote.txt +++ b/Documentation/git-peek-remote.txt @@ -37,14 +37,6 @@ OPTIONS The repository to sync from. -Author ------- -Written by Junio C Hamano <gitster@pobox.com> - -Documentation --------------- -Documentation by Junio C Hamano. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-prune-packed.txt b/Documentation/git-prune-packed.txt index abfc6b6ead..9e6202cdff 100644 --- a/Documentation/git-prune-packed.txt +++ b/Documentation/git-prune-packed.txt @@ -36,14 +36,6 @@ OPTIONS --quiet:: Squelch the progress indicator. -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by Ryan Anderson <ryan@michonline.com> - SEE ALSO -------- linkgit:git-pack-objects[1] diff --git a/Documentation/git-prune.txt b/Documentation/git-prune.txt index 4d673a5686..f616a739ef 100644 --- a/Documentation/git-prune.txt +++ b/Documentation/git-prune.txt @@ -78,14 +78,6 @@ linkgit:git-fsck[1], linkgit:git-gc[1], linkgit:git-reflog[1] -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-pull.txt b/Documentation/git-pull.txt index b33e6be872..14609cbd4d 100644 --- a/Documentation/git-pull.txt +++ b/Documentation/git-pull.txt @@ -84,7 +84,7 @@ must be given before the options meant for 'git fetch'. --verbose:: Pass --verbose to git-fetch and git-merge. ---[no-]recurse-submodules:: +--[no-]recurse-submodules[=yes|on-demand|no]:: This option controls if new commits of all populated submodules should be fetched too (see linkgit:git-config[1] and linkgit:gitmodules[5]). That might be necessary to get the data needed for merging submodule @@ -220,22 +220,19 @@ If you tried a pull which resulted in a complex conflicts and would want to start over, you can recover with 'git reset'. +BUGS +---- +Using --recurse-submodules can only fetch new commits in already checked +out submodules right now. When e.g. upstream added a new submodule in the +just fetched commits of the superproject the submodule itself can not be +fetched, making it impossible to check out that submodule later without +having to do a fetch again. This is expected to be fixed in a future git +version. + SEE ALSO -------- linkgit:git-fetch[1], linkgit:git-merge[1], linkgit:git-config[1] - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> -and Junio C Hamano <gitster@pobox.com> - -Documentation --------------- -Documentation by Jon Loeliger, -David Greaves, -Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-push.txt b/Documentation/git-push.txt index e11660a2e6..88acfcd4cc 100644 --- a/Documentation/git-push.txt +++ b/Documentation/git-push.txt @@ -406,16 +406,6 @@ Commits A and B would no longer belong to a branch with a symbolic name, and so would be unreachable. As such, these commits would be removed by a `git gc` command on the origin repository. - -Author ------- -Written by Junio C Hamano <gitster@pobox.com>, later rewritten in C -by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-quiltimport.txt b/Documentation/git-quiltimport.txt index 579e8d2f3b..7f112f3dcd 100644 --- a/Documentation/git-quiltimport.txt +++ b/Documentation/git-quiltimport.txt @@ -49,14 +49,6 @@ The default for the patch directory is patches or the value of the $QUILT_PATCHES environment variable. -Author ------- -Written by Eric Biederman <ebiederm@lnxi.com> - -Documentation --------------- -Documentation by Eric Biederman <ebiederm@lnxi.com> - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-read-tree.txt b/Documentation/git-read-tree.txt index 634423a69e..26fdadc642 100644 --- a/Documentation/git-read-tree.txt +++ b/Documentation/git-read-tree.txt @@ -421,15 +421,6 @@ SEE ALSO linkgit:git-write-tree[1]; linkgit:git-ls-files[1]; linkgit:gitignore[5] - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-rebase.txt b/Documentation/git-rebase.txt index 96680c8456..620d50e71f 100644 --- a/Documentation/git-rebase.txt +++ b/Documentation/git-rebase.txt @@ -66,8 +66,9 @@ would be: D---E---F---G master ------------ -The latter form is just a short-hand of `git checkout topic` -followed by `git rebase master`. +*NOTE:* The latter form is just a short-hand of `git checkout topic` +followed by `git rebase master`. When rebase exits `topic` will +remain the checked-out branch. If the upstream branch already contains a change you have made (e.g., because you mailed a patch which was applied upstream), then that commit @@ -658,7 +659,6 @@ The ripple effect of a "hard case" recovery is especially bad: 'everyone' downstream from 'topic' will now have to perform a "hard case" recovery too! - BUGS ---- The todo list presented by `--preserve-merges --interactive` does not @@ -681,15 +681,6 @@ by moving the "pick 4" line will result in the following history: 1 --- 2 --- 4 --- 5 ------------ -Authors ------- -Written by Junio C Hamano <gitster@pobox.com> and -Johannes E. Schindelin <johannes.schindelin@gmx.de> - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-receive-pack.txt b/Documentation/git-receive-pack.txt index 2790eebaff..f34e0ae1bd 100644 --- a/Documentation/git-receive-pack.txt +++ b/Documentation/git-receive-pack.txt @@ -151,15 +151,6 @@ SEE ALSO -------- linkgit:git-send-pack[1] - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by Junio C Hamano. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-reflog.txt b/Documentation/git-reflog.txt index e50bd9b68d..09057bf90c 100644 --- a/Documentation/git-reflog.txt +++ b/Documentation/git-reflog.txt @@ -90,14 +90,6 @@ them. --verbose:: Print extra information on screen. -Author ------- -Written by Junio C Hamano <gitster@pobox.com> - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-relink.txt b/Documentation/git-relink.txt index 8fc809f82b..9893376487 100644 --- a/Documentation/git-relink.txt +++ b/Documentation/git-relink.txt @@ -24,14 +24,6 @@ OPTIONS <dir>:: Directories containing a .git/objects/ subdirectory. -Author ------- -Written by Ryan Anderson <ryan@michonline.com> - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-remote-ext.txt b/Documentation/git-remote-ext.txt index 2d65cfefd5..68263a6a53 100644 --- a/Documentation/git-remote-ext.txt +++ b/Documentation/git-remote-ext.txt @@ -7,17 +7,17 @@ git-remote-ext - Bridge smart transport to external command. SYNOPSIS -------- -git remote add nick "ext::<command>[ <arguments>...]" +git remote add <nick> "ext::<command>[ <arguments>...]" DESCRIPTION ----------- -This remote helper uses the specified 'program' to connect +This remote helper uses the specified '<command>' to connect to a remote git server. -Data written to stdin of this specified 'program' is assumed +Data written to stdin of the specified '<command>' is assumed to be sent to a git:// server, git-upload-pack, git-receive-pack or git-upload-archive (depending on situation), and data read -from stdout of this program is assumed to be received from +from stdout of <command> is assumed to be received from the same service. Command and arguments are separated by an unescaped space. @@ -40,7 +40,7 @@ The following sequences have a special meaning: git wants to invoke. '%G' (must be the first characters in an argument):: - This argument will not be passed to 'program'. Instead, it + This argument will not be passed to '<command>'. Instead, it will cause the helper to start by sending git:// service requests to the remote side with the service field set to an appropriate value and the repository field set to rest of the argument. Default is not to send @@ -50,7 +50,7 @@ This is useful if remote side is git:// server accessed over some tunnel. '%V' (must be first characters in argument):: - This argument will not be passed to 'program'. Instead it sets + This argument will not be passed to '<command>'. Instead it sets the vhost field in the git:// service request (to rest of the argument). Default is not to send vhost in such request (if sent). @@ -76,7 +76,7 @@ EXAMPLES: --------- This remote helper is transparently used by git when you use commands such as "git fetch <URL>", "git clone <URL>", -, "git push <URL>" or "git remote add nick <URL>", where <URL> +, "git push <URL>" or "git remote add <nick> <URL>", where <URL> begins with `ext::`. Examples: "ext::ssh -i /home/foo/.ssh/somekey user@host.example %S 'foo/repo'":: diff --git a/Documentation/git-remote-helpers.txt b/Documentation/git-remote-helpers.txt index 3a23477ce7..87cd11f2c4 100644 --- a/Documentation/git-remote-helpers.txt +++ b/Documentation/git-remote-helpers.txt @@ -201,12 +201,12 @@ REF LIST ATTRIBUTES OPTIONS ------- -'option verbosity' <N>:: +'option verbosity' <n>:: Changes the verbosity of messages displayed by the helper. - A value of 0 for N means that processes operate + A value of 0 for <n> means that processes operate quietly, and the helper produces only error output. 1 is the default level of verbosity, and higher values - of N correspond to the number of -v flags passed on the + of <n> correspond to the number of -v flags passed on the command line. 'option progress' \{'true'|'false'\}:: @@ -239,10 +239,6 @@ SEE ALSO -------- linkgit:git-remote[1] -Documentation -------------- -Documentation by Daniel Barkalow and Ilari Liusvaara - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-remote.txt b/Documentation/git-remote.txt index c258ea48db..528f34a131 100644 --- a/Documentation/git-remote.txt +++ b/Documentation/git-remote.txt @@ -10,7 +10,7 @@ SYNOPSIS -------- [verse] 'git remote' [-v | --verbose] -'git remote add' [-t <branch>] [-m <master>] [-f] [--tags|--no-tags] [--mirror] <name> <url> +'git remote add' [-t <branch>] [-m <master>] [-f] [--tags|--no-tags] [--mirror=<fetch|push>] <name> <url> 'git remote rename' <old> <new> 'git remote rm' <name> 'git remote set-head' <name> (-a | -d | <branch>) @@ -67,11 +67,14 @@ multiple branches without grabbing all branches. With `-m <master>` option, `$GIT_DIR/remotes/<name>/HEAD` is set up to point at remote's `<master>` branch. See also the set-head command. + -In mirror mode, enabled with `\--mirror`, the refs will not be stored -in the 'refs/remotes/' namespace, but in 'refs/heads/'. This option -only makes sense in bare repositories. If a remote uses mirror -mode, furthermore, `git push` will always behave as if `\--mirror` -was passed. +When a fetch mirror is created with `\--mirror=fetch`, the refs will not +be stored in the 'refs/remotes/' namespace, but rather everything in +'refs/' on the remote will be directly mirrored into 'refs/' in the +local repository. This option only makes sense in bare repositories, +because a fetch would overwrite any local commits. ++ +When a push mirror is created with `\--mirror=push`, then `git push` +will always behave as if `\--mirror` was passed. 'rename':: @@ -214,16 +217,6 @@ linkgit:git-fetch[1] linkgit:git-branch[1] linkgit:git-config[1] -Author ------- -Written by Junio Hamano - - -Documentation --------------- -Documentation by J. Bruce Fields and the git-list <git@vger.kernel.org>. - - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-repack.txt b/Documentation/git-repack.txt index 27f7865b06..0decee240b 100644 --- a/Documentation/git-repack.txt +++ b/Documentation/git-repack.txt @@ -123,15 +123,6 @@ need to set the configuration variable `repack.UseDeltaBaseOffset` to is unaffected by this option as the conversion is performed on the fly as needed in that case. - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by Ryan Anderson <ryan@michonline.com> - SEE ALSO -------- linkgit:git-pack-objects[1] diff --git a/Documentation/git-replace.txt b/Documentation/git-replace.txt index fde2092582..17df525275 100644 --- a/Documentation/git-replace.txt +++ b/Documentation/git-replace.txt @@ -80,17 +80,6 @@ linkgit:git-tag[1] linkgit:git-branch[1] linkgit:git[1] -Author ------- -Written by Christian Couder <chriscool@tuxfamily.org> and Junio C -Hamano <gitster@pobox.com>, based on 'git tag' by Kristian Hogsberg -<krh@redhat.com> and Carlos Rica <jasampler@gmail.com>. - -Documentation --------------- -Documentation by Christian Couder <chriscool@tuxfamily.org> and the -git-list <git@vger.kernel.org>, based on 'git tag' documentation. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-repo-config.txt b/Documentation/git-repo-config.txt index e5bdb5533e..a0d1fa6594 100644 --- a/Documentation/git-repo-config.txt +++ b/Documentation/git-repo-config.txt @@ -16,3 +16,7 @@ DESCRIPTION This is a synonym for linkgit:git-config[1]. Please refer to the documentation of that command. + +GIT +--- +Part of the linkgit:git[1] suite diff --git a/Documentation/git-request-pull.txt b/Documentation/git-request-pull.txt index 400f61f6e2..3521d8e3c8 100644 --- a/Documentation/git-request-pull.txt +++ b/Documentation/git-request-pull.txt @@ -29,14 +29,6 @@ OPTIONS <end>:: Commit to end at; defaults to HEAD. -Author ------- -Written by Ryan Anderson <ryan@michonline.com> and Junio C Hamano <gitster@pobox.com> - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-rerere.txt b/Documentation/git-rerere.txt index db99d4786e..52db1d80cf 100644 --- a/Documentation/git-rerere.txt +++ b/Documentation/git-rerere.txt @@ -7,7 +7,7 @@ git-rerere - Reuse recorded resolution of conflicted merges SYNOPSIS -------- -'git rerere' ['clear'|'forget' [<pathspec>]|'diff'|'status'|'gc'] +'git rerere' ['clear'|'forget' <pathspec>|'diff'|'status'|'gc'] DESCRIPTION ----------- @@ -43,7 +43,7 @@ will automatically invoke this command. 'forget' <pathspec>:: This resets the conflict resolutions which rerere has recorded for the current -conflict in <pathspec>. The <pathspec> is optional. +conflict in <pathspec>. 'diff':: @@ -205,11 +205,6 @@ would conflict the same way as the test merge you resolved earlier. 'git rerere' will be run by 'git rebase' to help you resolve this conflict. - -Author ------- -Written by Junio C Hamano <gitster@pobox.com> - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-reset.txt b/Documentation/git-reset.txt index 927ecee2f2..8481f9db74 100644 --- a/Documentation/git-reset.txt +++ b/Documentation/git-reset.txt @@ -397,15 +397,6 @@ entries: X means any state and U means an unmerged index. - -Author ------- -Written by Junio C Hamano <gitster@pobox.com> and Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-rev-list.txt b/Documentation/git-rev-list.txt index 8e1e32908c..415f4f0b30 100644 --- a/Documentation/git-rev-list.txt +++ b/Documentation/git-rev-list.txt @@ -16,6 +16,10 @@ SYNOPSIS [ \--sparse ] [ \--merges ] [ \--no-merges ] + [ \--min-parents=<number> ] + [ \--no-min-parents ] + [ \--max-parents=<number> ] + [ \--no-max-parents ] [ \--first-parent ] [ \--remove-empty ] [ \--full-history ] @@ -31,6 +35,9 @@ SYNOPSIS [ \--parents ] [ \--timestamp ] [ \--left-right ] + [ \--left-only ] + [ \--right-only ] + [ \--cherry-mark ] [ \--cherry-pick ] [ \--encoding[=<encoding>] ] [ \--(author|committer|grep)=<pattern> ] @@ -105,16 +112,6 @@ include::rev-list-options.txt[] include::pretty-formats.txt[] - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by David Greaves, Junio C Hamano, Jonas Fonseca -and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-rev-parse.txt b/Documentation/git-rev-parse.txt index ff23cb0219..02c44c999f 100644 --- a/Documentation/git-rev-parse.txt +++ b/Documentation/git-rev-parse.txt @@ -308,16 +308,6 @@ $ git rev-parse --default master --verify $REV + but if $REV is empty, the commit object name from master will be printed. - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> . -Junio C Hamano <gitster@pobox.com> and Pierre Habouzit <madcoder@debian.org> - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-revert.txt b/Documentation/git-revert.txt index 45be851750..ac10cfbb14 100644 --- a/Documentation/git-revert.txt +++ b/Documentation/git-revert.txt @@ -105,14 +105,6 @@ git revert -n master{tilde}5..master{tilde}2:: changes. The revert only modifies the working tree and the index. -Author ------- -Written by Junio C Hamano <gitster@pobox.com> - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - SEE ALSO -------- linkgit:git-cherry-pick[1] diff --git a/Documentation/git-rm.txt b/Documentation/git-rm.txt index 0adbe8b1f8..8c0554f971 100644 --- a/Documentation/git-rm.txt +++ b/Documentation/git-rm.txt @@ -153,14 +153,6 @@ SEE ALSO -------- linkgit:git-add[1] -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-send-email.txt b/Documentation/git-send-email.txt index 7ec9dabe68..ee14f74fd3 100644 --- a/Documentation/git-send-email.txt +++ b/Documentation/git-send-email.txt @@ -348,7 +348,6 @@ sendemail.confirm:: one of 'always', 'never', 'cc', 'compose', or 'auto'. See '--confirm' in the previous section for the meaning of these values. - Use gmail as the smtp server ---------------------------- @@ -363,20 +362,6 @@ Add the following section to the config file: Note: the following perl modules are required Net::SMTP::SSL, MIME::Base64 and Authen::SASL - -Author ------- -Written by Ryan Anderson <ryan@michonline.com> - -git-send-email is originally based upon -send_lots_of_email.pl by Greg Kroah-Hartman. - - -Documentation --------------- -Documentation by Ryan Anderson - - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-send-pack.txt b/Documentation/git-send-pack.txt index deaa7d9654..17f8f55526 100644 --- a/Documentation/git-send-pack.txt +++ b/Documentation/git-send-pack.txt @@ -114,15 +114,6 @@ With '--force', the fast-forward check is disabled for all refs. Optionally, a <ref> parameter can be prefixed with a plus '+' sign to disable the fast-forward check only on that ref. - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by Junio C Hamano. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-sh-setup.txt b/Documentation/git-sh-setup.txt index 3da241304b..053df505bc 100644 --- a/Documentation/git-sh-setup.txt +++ b/Documentation/git-sh-setup.txt @@ -66,15 +66,6 @@ get_author_ident_from_commit:: outputs code for use with eval to set the GIT_AUTHOR_NAME, GIT_AUTHOR_EMAIL and GIT_AUTHOR_DATE variables for a given commit. - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-shell.txt b/Documentation/git-shell.txt index 6403126a02..d7d4b92894 100644 --- a/Documentation/git-shell.txt +++ b/Documentation/git-shell.txt @@ -28,14 +28,6 @@ read and execute permissions to the directory in order to execute the programs in it. The programs are executed with a cwd of $HOME, and <argument> is parsed as a command-line string. -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by Petr Baudis and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-shortlog.txt b/Documentation/git-shortlog.txt index 5cc3baf48d..ff3755b4c7 100644 --- a/Documentation/git-shortlog.txt +++ b/Documentation/git-shortlog.txt @@ -68,15 +68,6 @@ spelled differently. include::mailmap.txt[] - -Author ------- -Written by Jeff Garzik <jgarzik@pobox.com> - -Documentation --------------- -Documentation by Junio C Hamano. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-show-branch.txt b/Documentation/git-show-branch.txt index 3b0c88271a..ee4559b6f2 100644 --- a/Documentation/git-show-branch.txt +++ b/Documentation/git-show-branch.txt @@ -200,17 +200,6 @@ shows 10 reflog entries going back from the tip as of 1 hour ago. Without `--list`, the output also shows how these tips are topologically related with each other. - -Author ------- -Written by Junio C Hamano <gitster@pobox.com> - - -Documentation --------------- -Documentation by Junio C Hamano. - - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-show-index.txt b/Documentation/git-show-index.txt index 8382fbe0ec..c4d99f1028 100644 --- a/Documentation/git-show-index.txt +++ b/Documentation/git-show-index.txt @@ -20,15 +20,6 @@ The information it outputs is subset of what you can get from 'git verify-pack -v'; this command only shows the packfile offset and SHA1 of each object. - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by Junio C Hamano - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-show-ref.txt b/Documentation/git-show-ref.txt index be0ec189af..3c45895299 100644 --- a/Documentation/git-show-ref.txt +++ b/Documentation/git-show-ref.txt @@ -177,11 +177,6 @@ linkgit:git-ls-remote[1], linkgit:git-update-ref[1], linkgit:gitrepository-layout[5] -AUTHORS -------- -Written by Linus Torvalds <torvalds@osdl.org>. -Man page by Jonas Fonseca <fonseca@diku.dk>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-show.txt b/Documentation/git-show.txt index f0a8a1aff3..7f075e84f5 100644 --- a/Documentation/git-show.txt +++ b/Documentation/git-show.txt @@ -72,17 +72,6 @@ Discussion include::i18n.txt[] -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> and -Junio C Hamano <gitster@pobox.com>. Significantly enhanced by -Johannes Schindelin <Johannes.Schindelin@gmx.de>. - - -Documentation -------------- -Documentation by David Greaves, Petr Baudis and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-stage.txt b/Documentation/git-stage.txt index 7f251a5865..ba3fe0d7f5 100644 --- a/Documentation/git-stage.txt +++ b/Documentation/git-stage.txt @@ -17,3 +17,7 @@ DESCRIPTION This is a synonym for linkgit:git-add[1]. Please refer to the documentation of that command. + +GIT +--- +Part of the linkgit:git[1] suite diff --git a/Documentation/git-stash.txt b/Documentation/git-stash.txt index 8728f7a514..79abc38e50 100644 --- a/Documentation/git-stash.txt +++ b/Documentation/git-stash.txt @@ -257,10 +257,6 @@ linkgit:git-commit[1], linkgit:git-reflog[1], linkgit:git-reset[1] -AUTHOR ------- -Written by Nanako Shiraishi <nanako3@bluebottle.com> - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-status.txt b/Documentation/git-status.txt index 5102a23f8e..00b699fef7 100644 --- a/Documentation/git-status.txt +++ b/Documentation/git-status.txt @@ -174,14 +174,6 @@ SEE ALSO -------- linkgit:gitignore[5] -Author ------- -Written by Junio C Hamano <gitster@pobox.com>. - -Documentation --------------- -Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-stripspace.txt b/Documentation/git-stripspace.txt index 7508c0e42d..10509cc450 100644 --- a/Documentation/git-stripspace.txt +++ b/Documentation/git-stripspace.txt @@ -23,14 +23,6 @@ OPTIONS <stream>:: Byte stream to act on. -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-submodule.txt b/Documentation/git-submodule.txt index 1ed331c599..1a16ff6044 100644 --- a/Documentation/git-submodule.txt +++ b/Documentation/git-submodule.txt @@ -101,9 +101,10 @@ status:: currently checked out commit for each submodule, along with the submodule path and the output of 'git describe' for the SHA-1. Each SHA-1 will be prefixed with `-` if the submodule is not - initialized and `+` if the currently checked out submodule commit + initialized, `+` if the currently checked out submodule commit does not match the SHA-1 found in the index of the containing - repository. This command is the default command for 'git submodule'. + repository and `U` if the submodule has merge conflicts. + This command is the default command for 'git submodule'. + If '--recursive' is specified, this command will recurse into nested submodules, and show their status as well. @@ -257,11 +258,6 @@ This file should be formatted in the same way as `$GIT_DIR/config`. The key to each submodule url is "submodule.$name.url". See linkgit:gitmodules[5] for details. - -AUTHOR ------- -Written by Lars Hjemli <hjemli@gmail.com> - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-svn.txt b/Documentation/git-svn.txt index 0ade2ce54e..30a67486d2 100644 --- a/Documentation/git-svn.txt +++ b/Documentation/git-svn.txt @@ -66,7 +66,7 @@ COMMANDS Set the 'rewriteRoot' option in the [svn-remote] config. --rewrite-uuid=<UUID>;; Set the 'rewriteUUID' option in the [svn-remote] config. ---username=<USER>;; +--username=<user>;; For transports that SVN handles authentication for (http, https, and plain svn), specify the username. For other transports (eg svn+ssh://), you must include the username in @@ -217,6 +217,13 @@ config key: svn.commiturl (overwrites all svn-remote.<name>.commiturl options) Using this option for any other purpose (don't ask) is very strongly discouraged. +--mergeinfo=<mergeinfo>;; + Add the given merge information during the dcommit + (e.g. `--mergeinfo="/branches/foo:1-10"`). All svn server versions can + store this information (as a property), and svn clients starting from + version 1.5 can make use of it. 'git svn' currently does not use it + and does not set it automatically. + 'branch':: Create a branch in the SVN repository. @@ -443,8 +450,8 @@ OPTIONS Only used with the 'init' command. These are passed directly to 'git init'. --r <ARG>:: ---revision <ARG>:: +-r <arg>:: +--revision <arg>:: Used with the 'fetch' command. + This allows revision ranges for partial/cauterized history @@ -648,6 +655,16 @@ svn-remote.<name>.rewriteUUID:: where the original UUID is not available via either useSvmProps or useSvnsyncProps. +svn-remote.<name>.pushurl:: + + Similar to git's 'remote.<name>.pushurl', this key is designed + to be used in cases where 'url' points to an SVN repository + via a read-only transport, to provide an alternate read/write + transport. It is assumed that both keys point to the same + repository. Unlike 'commiturl', 'pushurl' is a base path. If + either 'commiturl' or 'pushurl' could be used, 'commiturl' + takes precedence. + svn.brokenSymlinkWorkaround:: This disables potentially expensive checks to workaround broken symlinks checked into SVN by broken clients. Set this @@ -878,10 +895,6 @@ SEE ALSO -------- linkgit:git-rebase[1] -Author ------- -Written by Eric Wong <normalperson@yhbt.net>. - -Documentation -------------- -Written by Eric Wong <normalperson@yhbt.net>. +GIT +--- +Part of the linkgit:git[1] suite diff --git a/Documentation/git-symbolic-ref.txt b/Documentation/git-symbolic-ref.txt index 33a1536294..d7795ed657 100644 --- a/Documentation/git-symbolic-ref.txt +++ b/Documentation/git-symbolic-ref.txt @@ -53,10 +53,6 @@ and symbolic refs are used by default. symbolic ref were printed correctly, with status 1 if the requested name is not a symbolic ref, or 128 if another error occurs. -Author ------- -Written by Junio C Hamano <gitster@pobox.com> - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-tag.txt b/Documentation/git-tag.txt index 65f76c5440..d82f62120a 100644 --- a/Documentation/git-tag.txt +++ b/Documentation/git-tag.txt @@ -165,13 +165,12 @@ You can test which tag you have by doing which should return 0123456789abcdef.. if you have the new version. -Sorry for inconvenience. +Sorry for the inconvenience. ------------ Does this seem a bit complicated? It *should* be. There is no -way that it would be correct to just "fix" it behind peoples -backs. People need to know that their tags might have been -changed. +way that it would be correct to just "fix" it automatically. +People need to know that their tags might have been changed. On Automatic following @@ -189,9 +188,10 @@ the toplevel but not limited to them. Mere mortals when pulling from each other do not necessarily want to automatically get private anchor point tags from the other person. -You would notice "please pull" messages on the mailing list says -repo URL and branch name alone. This is designed to be easily -cut&pasted to a 'git fetch' command line: +Often, "please pull" messages on the mailing list just provide +two pieces of information: a repo URL and a branch name; this +is designed to be easily cut&pasted at the end of a 'git fetch' +command line: ------------ Linus, please pull from @@ -207,14 +207,14 @@ becomes: $ git pull git://git..../proj.git master ------------ -In such a case, you do not want to automatically follow other's -tags. +In such a case, you do not want to automatically follow the other +person's tags. -One important aspect of git is it is distributed, and being -distributed largely means there is no inherent "upstream" or +One important aspect of git is its distributed nature, which +largely means there is no inherent "upstream" or "downstream" in the system. On the face of it, the above example might seem to indicate that the tag namespace is owned -by upper echelon of people and tags only flow downwards, but +by the upper echelon of people and that tags only flow downwards, but that is not the case. It only shows that the usage pattern determines who are interested in whose tags. @@ -232,7 +232,7 @@ this case. It may well be that among networking people, they may want to exchange the tags internal to their group, but in that workflow -they are most likely tracking with each other's progress by +they are most likely tracking each other's progress by having remote-tracking branches. Again, the heuristic to automatically follow such tags is a good thing. @@ -242,35 +242,26 @@ On Backdating Tags If you have imported some changes from another VCS and would like to add tags for major releases of your work, it is useful to be able -to specify the date to embed inside of the tag object. The data in +to specify the date to embed inside of the tag object; such data in the tag object affects, for example, the ordering of tags in the gitweb interface. To set the date used in future tag objects, set the environment -variable GIT_COMMITTER_DATE to one or more of the date and time. The -date and time can be specified in a number of ways; the most common -is "YYYY-MM-DD HH:MM". +variable GIT_COMMITTER_DATE (see the later discussion of possible +values; the most common form is "YYYY-MM-DD HH:MM"). -An example follows. +For example: ------------ $ GIT_COMMITTER_DATE="2006-10-02 10:31" git tag -s v1.0.1 ------------ +include::date-formats.txt[] SEE ALSO -------- linkgit:git-check-ref-format[1]. -Author ------- -Written by Linus Torvalds <torvalds@osdl.org>, -Junio C Hamano <gitster@pobox.com> and Chris Wright <chrisw@osdl.org>. - -Documentation --------------- -Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-tar-tree.txt b/Documentation/git-tar-tree.txt index 3c786bd283..5f15754257 100644 --- a/Documentation/git-tar-tree.txt +++ b/Documentation/git-tar-tree.txt @@ -76,14 +76,6 @@ git tar-tree HEAD:Documentation/ git-docs > git-1.4.0-docs.tar:: Put everything in the current head's Documentation/ directory into 'git-1.4.0-docs.tar', with the prefix 'git-docs/'. -Author ------- -Written by Rene Scharfe. - -Documentation --------------- -Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-unpack-file.txt b/Documentation/git-unpack-file.txt index 995db9fead..c49d727f74 100644 --- a/Documentation/git-unpack-file.txt +++ b/Documentation/git-unpack-file.txt @@ -22,14 +22,6 @@ OPTIONS <blob>:: Must be a blob id -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-unpack-objects.txt b/Documentation/git-unpack-objects.txt index 36d1038056..dd7799095b 100644 --- a/Documentation/git-unpack-objects.txt +++ b/Documentation/git-unpack-objects.txt @@ -43,15 +43,6 @@ OPTIONS --strict:: Don't write objects with broken content or links. - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation -------------- -Documentation by Junio C Hamano - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-update-index.txt b/Documentation/git-update-index.txt index 1ca56c85aa..d3931294d1 100644 --- a/Documentation/git-update-index.txt +++ b/Documentation/git-update-index.txt @@ -365,15 +365,6 @@ SEE ALSO linkgit:git-config[1], linkgit:git-add[1] - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-update-ref.txt b/Documentation/git-update-ref.txt index 9639f705af..e25a65a80f 100644 --- a/Documentation/git-update-ref.txt +++ b/Documentation/git-update-ref.txt @@ -84,10 +84,6 @@ An update will fail (without changing <ref>) if the current user is unable to create a new log file, append to the existing log file or does not have committer information available. -Author ------- -Written by Linus Torvalds <torvalds@osdl.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-update-server-info.txt b/Documentation/git-update-server-info.txt index 035cc3018f..775024da3e 100644 --- a/Documentation/git-update-server-info.txt +++ b/Documentation/git-update-server-info.txt @@ -38,15 +38,6 @@ what they are for: * info/refs - -Author ------- -Written by Junio C Hamano <gitster@pobox.com> - -Documentation --------------- -Documentation by Junio C Hamano. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-upload-archive.txt b/Documentation/git-upload-archive.txt index f5f2b3908b..acbf634f85 100644 --- a/Documentation/git-upload-archive.txt +++ b/Documentation/git-upload-archive.txt @@ -24,14 +24,6 @@ OPTIONS <directory>:: The repository to get a tar archive from. -Author ------- -Written by Franck Bui-Huu. - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-upload-pack.txt b/Documentation/git-upload-pack.txt index 71ca4ef442..4c0ca9ded2 100644 --- a/Documentation/git-upload-pack.txt +++ b/Documentation/git-upload-pack.txt @@ -33,14 +33,6 @@ OPTIONS <directory>:: The repository to sync from. -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by Junio C Hamano. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-var.txt b/Documentation/git-var.txt index 458f3e2755..6498f7cb69 100644 --- a/Documentation/git-var.txt +++ b/Documentation/git-var.txt @@ -65,14 +65,6 @@ linkgit:git-commit-tree[1] linkgit:git-tag[1] linkgit:git-config[1] -Author ------- -Written by Eric Biederman <ebiederm@xmission.com> - -Documentation --------------- -Documentation by Eric Biederman and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-verify-pack.txt b/Documentation/git-verify-pack.txt index 916a38aa99..7c2428d569 100644 --- a/Documentation/git-verify-pack.txt +++ b/Documentation/git-verify-pack.txt @@ -8,7 +8,7 @@ git-verify-pack - Validate packed git archive files SYNOPSIS -------- -'git verify-pack' [-v|--verbose] [--] <pack>.idx ... +'git verify-pack' [-v|--verbose] [-s|--stat-only] [--] <pack>.idx ... DESCRIPTION @@ -47,14 +47,6 @@ for objects that are not deltified in the pack, and for objects that are deltified. -Author ------- -Written by Junio C Hamano <gitster@pobox.com> - -Documentation --------------- -Documentation by Junio C Hamano - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-verify-tag.txt b/Documentation/git-verify-tag.txt index 711219749c..8c9a71865b 100644 --- a/Documentation/git-verify-tag.txt +++ b/Documentation/git-verify-tag.txt @@ -22,14 +22,6 @@ OPTIONS <tag>...:: SHA1 identifiers of git tag objects. -Author ------- -Written by Jan Harkes <jaharkes@cs.cmu.edu> and Eric W. Biederman <ebiederm@xmission.com> - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-web--browse.txt b/Documentation/git-web--browse.txt index c0416e5e1a..69d92fa00e 100644 --- a/Documentation/git-web--browse.txt +++ b/Documentation/git-web--browse.txt @@ -116,16 +116,6 @@ $ git config --global web.browser firefox as they are probably more user specific than repository specific. See linkgit:git-config[1] for more information about this. -Author ------- -Written by Christian Couder <chriscool@tuxfamily.org> and the git-list -<git@vger.kernel.org>, based on 'git mergetool' by Theodore Y. Ts'o. - -Documentation -------------- -Documentation by Christian Couder <chriscool@tuxfamily.org> and the -git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-whatchanged.txt b/Documentation/git-whatchanged.txt index ea753cdafc..31f3663ae7 100644 --- a/Documentation/git-whatchanged.txt +++ b/Documentation/git-whatchanged.txt @@ -63,17 +63,6 @@ git whatchanged --since="2 weeks ago" \-- gitk:: The "--" is necessary to avoid confusion with the *branch* named 'gitk' - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> and -Junio C Hamano <gitster@pobox.com> - - -Documentation --------------- -Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-write-tree.txt b/Documentation/git-write-tree.txt index bfceacacb3..e8c94c1352 100644 --- a/Documentation/git-write-tree.txt +++ b/Documentation/git-write-tree.txt @@ -36,15 +36,6 @@ OPTIONS `<prefix>`. This can be used to write the tree object for a subproject that is in the named subdirectory. - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git.txt b/Documentation/git.txt index 0c32d45248..9d5949229a 100644 --- a/Documentation/git.txt +++ b/Documentation/git.txt @@ -44,9 +44,18 @@ unreleased) version of git, that is available from 'master' branch of the `git.git` repository. Documentation for older releases are available here: -* link:v1.7.4.1/git.html[documentation for release 1.7.4.1] +* link:v1.7.5/git.html[documentation for release 1.7.5] * release notes for + link:RelNotes/1.7.5.txt[1.7.5]. + +* link:v1.7.4.5/git.html[documentation for release 1.7.4.5] + +* release notes for + link:RelNotes/1.7.4.5.txt[1.7.4.5], + link:RelNotes/1.7.4.4.txt[1.7.4.4], + link:RelNotes/1.7.4.3.txt[1.7.4.3], + link:RelNotes/1.7.4.2.txt[1.7.4.2], link:RelNotes/1.7.4.1.txt[1.7.4.1], link:RelNotes/1.7.4.txt[1.7.4]. @@ -619,7 +628,6 @@ where: contents of <old|new>, <old|new>-hex:: are the 40-hexdigit SHA1 hashes, <old|new>-mode:: are the octal representation of the file modes. - + The file parameters can point at the user's working file (e.g. `new-file` in "git-diff-files"), `/dev/null` (e.g. `old-file` @@ -745,16 +753,12 @@ unmerged version of a file when a merge is in progress. Authors ------- -* git's founding father is Linus Torvalds <torvalds@osdl.org>. -* The current git nurse is Junio C Hamano <gitster@pobox.com>. -* The git potty was written by Andreas Ericsson <ae@op5.se>. -* General upbringing is handled by the git-list <git@vger.kernel.org>. - -Documentation --------------- -The documentation for git suite was started by David Greaves -<david@dgreaves.com>, and later enhanced greatly by the -contributors on the git-list <git@vger.kernel.org>. +Git was started by Linus Torvalds, and is currently maintained by Junio +C Hamano. Numerous contributions have come from the git mailing list +<git@vger.kernel.org>. For a more complete list of contributors, see +http://git-scm.com/about. If you have a clone of git.git itself, the +output of linkgit:git-shortlog[1] and linkgit:git-blame[1] can show you +the authors for specific parts of the project. Reporting Bugs -------------- diff --git a/Documentation/gitattributes.txt b/Documentation/gitattributes.txt index 7e7e12168e..15aebc6062 100644 --- a/Documentation/gitattributes.txt +++ b/Documentation/gitattributes.txt @@ -632,7 +632,7 @@ Performing a three-way merge `merge` ^^^^^^^ -The attribute `merge` affects how three versions of a file is +The attribute `merge` affects how three versions of a file are merged when a file-level merge is necessary during `git merge`, and other commands such as `git revert` and `git cherry-pick`. @@ -646,15 +646,15 @@ Unset:: Take the version from the current branch as the tentative merge result, and declare that the merge has - conflicts. This is suitable for binary files that does + conflicts. This is suitable for binary files that do not have a well-defined merge semantics. Unspecified:: By default, this uses the same built-in 3-way merge - driver as is the case the `merge` attribute is set. - However, `merge.default` configuration variable can name - different merge driver to be used for paths to which the + driver as is the case when the `merge` attribute is set. + However, the `merge.default` configuration variable can name + different merge driver to be used with paths for which the `merge` attribute is unspecified. String:: diff --git a/Documentation/gitcli.txt b/Documentation/gitcli.txt index 6928724a05..f734f97b8e 100644 --- a/Documentation/gitcli.txt +++ b/Documentation/gitcli.txt @@ -169,10 +169,6 @@ See also http://marc.info/?l=git&m=116563135620359 and http://marc.info/?l=git&m=119150393620273 for further information. -Documentation -------------- -Documentation by Pierre Habouzit and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/gitignore.txt b/Documentation/gitignore.txt index 8416f3445a..2e7328b830 100644 --- a/Documentation/gitignore.txt +++ b/Documentation/gitignore.txt @@ -156,11 +156,6 @@ SEE ALSO linkgit:git-rm[1], linkgit:git-update-index[1], linkgit:gitrepository-layout[5] -Documentation -------------- -Documentation by David Greaves, Junio C Hamano, Josh Triplett, -Frank Lichtenheld, and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/gitk.txt b/Documentation/gitk.txt index e21bac4f3f..e10ac58cae 100644 --- a/Documentation/gitk.txt +++ b/Documentation/gitk.txt @@ -113,15 +113,6 @@ SEE ALSO A minimal repository browser and git tool output highlighter written in C using Ncurses. -Author ------- -Written by Paul Mackerras <paulus@samba.org>. - -Documentation --------------- -Documentation by Junio C Hamano, Jonas Fonseca, and the git-list -<git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/gitmodules.txt b/Documentation/gitmodules.txt index 68977943e7..4040941e55 100644 --- a/Documentation/gitmodules.txt +++ b/Documentation/gitmodules.txt @@ -45,12 +45,12 @@ submodule.<name>.update:: the '--merge' or '--rebase' options. submodule.<name>.fetchRecurseSubmodules:: - This option can be used to enable/disable recursive fetching of this + This option can be used to control recursive fetching of this submodule. If this option is also present in the submodules entry in .git/config of the superproject, the setting there will override the one found in .gitmodules. Both settings can be overridden on the command line by using the - "--[no-]recurse-submodules" option to "git fetch" and "git pull".. + "--[no-]recurse-submodules" option to "git fetch" and "git pull". submodule.<name>.ignore:: Defines under what circumstances "git status" and the diff family show @@ -90,10 +90,6 @@ SEE ALSO -------- linkgit:git-submodule[1] linkgit:git-config[1] -DOCUMENTATION -------------- -Documentation by Lars Hjemli <hjemli@gmail.com> - GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/glossary-content.txt b/Documentation/glossary-content.txt index f04b48ef0d..33716a31d0 100644 --- a/Documentation/glossary-content.txt +++ b/Documentation/glossary-content.txt @@ -273,6 +273,29 @@ This commit is referred to as a "merge commit", or sometimes just a <<def_pack,pack>>, to assist in efficiently accessing the contents of a pack. +[[def_pathspec]]pathspec:: + Pattern used to specify paths. ++ +Pathspecs are used on the command line of "git ls-files", "git +ls-tree", "git grep", "git checkout", and many other commands to +limit the scope of operations to some subset of the tree or +worktree. See the documentation of each command for whether +paths are relative to the current directory or toplevel. The +pathspec syntax is as follows: + +* any path matches itself +* the pathspec up to the last slash represents a + directory prefix. The scope of that pathspec is + limited to that subtree. +* the rest of the pathspec is a pattern for the remainder + of the pathname. Paths relative to the directory + prefix will be matched against that pattern using fnmatch(3); + in particular, '*' and '?' _can_ match directory separators. ++ +For example, Documentation/*.jpg will match all .jpg files +in the Documentation subtree, +including Documentation/chapter_1/figure_1.jpg. + [[def_parent]]parent:: A <<def_commit_object,commit object>> contains a (possibly empty) list of the logical predecessor(s) in the line of development, i.e. its diff --git a/Documentation/merge-config.txt b/Documentation/merge-config.txt index 1e5c22c5e5..8920258baa 100644 --- a/Documentation/merge-config.txt +++ b/Documentation/merge-config.txt @@ -6,6 +6,16 @@ merge.conflictstyle:: a `>>>>>>>` marker. An alternate style, "diff3", adds a `|||||||` marker and the original text before the `=======` marker. +merge.defaultToUpstream:: + If merge is called without any commit argument, merge the upstream + branches configured for the current branch by using their last + observed values stored in their remote tracking branches. + The values of the `branch.<current branch>.merge` that name the + branches at the remote named by `branch.<current branch>.remote` + are consulted, and then they are mapped via `remote.<remote>.fetch` + to their corresponding remote tracking branches, and the tips of + these tracking branches are merged. + merge.log:: In addition to branch names, populate the log message with at most the specified number of one-line descriptions from the @@ -33,10 +43,10 @@ merge.stat:: merge.tool:: Controls which merge resolution program is used by - linkgit:git-mergetool[1]. Valid built-in values are: "kdiff3", - "tkdiff", "meld", "xxdiff", "emerge", "vimdiff", "gvimdiff", - "diffuse", "ecmerge", "tortoisemerge", "p4merge", "araxis" and - "opendiff". Any other value is treated is custom merge tool + linkgit:git-mergetool[1]. Valid built-in values are: "araxis", + "bc3", "diffuse", "ecmerge", "emerge", "gvimdiff", "kdiff3", "meld", + "opendiff", "p4merge", "tkdiff", "tortoisemerge", "vimdiff" + and "xxdiff". Any other value is treated is custom merge tool and there must be a corresponding mergetool.<tool>.cmd option. merge.verbosity:: diff --git a/Documentation/merge-options.txt b/Documentation/merge-options.txt index e33e0f8e11..b613d4ed08 100644 --- a/Documentation/merge-options.txt +++ b/Documentation/merge-options.txt @@ -75,9 +75,17 @@ option can be used to override --squash. ifndef::git-pull[] -q:: --quiet:: - Operate quietly. + Operate quietly. Implies --no-progress. -v:: --verbose:: Be verbose. + +--progress:: +--no-progress:: + Turn progress on/off explicitly. If neither is specified, + progress is shown if standard error is connected to a terminal. + Note that not all merge strategies may support progress + reporting. + endif::git-pull[] diff --git a/Documentation/rev-list-options.txt b/Documentation/rev-list-options.txt index 44a2ef1de1..73111bb051 100644 --- a/Documentation/rev-list-options.txt +++ b/Documentation/rev-list-options.txt @@ -1,171 +1,17 @@ -Commit Formatting -~~~~~~~~~~~~~~~~~ - -ifdef::git-rev-list[] -Using these options, linkgit:git-rev-list[1] will act similar to the -more specialized family of commit log tools: linkgit:git-log[1], -linkgit:git-show[1], and linkgit:git-whatchanged[1] -endif::git-rev-list[] - -include::pretty-options.txt[] - ---relative-date:: - - Synonym for `--date=relative`. - ---date=(relative|local|default|iso|rfc|short|raw):: - - Only takes effect for dates shown in human-readable format, such - as when using "--pretty". `log.date` config variable sets a default - value for log command's --date option. -+ -`--date=relative` shows dates relative to the current time, -e.g. "2 hours ago". -+ -`--date=local` shows timestamps in user's local timezone. -+ -`--date=iso` (or `--date=iso8601`) shows timestamps in ISO 8601 format. -+ -`--date=rfc` (or `--date=rfc2822`) shows timestamps in RFC 2822 -format, often found in E-mail messages. -+ -`--date=short` shows only date but not time, in `YYYY-MM-DD` format. -+ -`--date=raw` shows the date in the internal raw git format `%s %z` format. -+ -`--date=default` shows timestamps in the original timezone -(either committer's or author's). - -ifdef::git-rev-list[] ---header:: - - Print the contents of the commit in raw-format; each record is - separated with a NUL character. -endif::git-rev-list[] - ---parents:: - - Print also the parents of the commit (in the form "commit parent..."). - Also enables parent rewriting, see 'History Simplification' below. - ---children:: - - Print also the children of the commit (in the form "commit child..."). - Also enables parent rewriting, see 'History Simplification' below. - -ifdef::git-rev-list[] ---timestamp:: - Print the raw commit timestamp. -endif::git-rev-list[] - ---left-right:: - - Mark which side of a symmetric diff a commit is reachable from. - Commits from the left side are prefixed with `<` and those from - the right with `>`. If combined with `--boundary`, those - commits are prefixed with `-`. -+ -For example, if you have this topology: -+ ------------------------------------------------------------------------ - y---b---b branch B - / \ / - / . - / / \ - o---x---a---a branch A ------------------------------------------------------------------------ -+ -you would get an output like this: -+ ------------------------------------------------------------------------ - $ git rev-list --left-right --boundary --pretty=oneline A...B - - >bbbbbbb... 3rd on b - >bbbbbbb... 2nd on b - <aaaaaaa... 3rd on a - <aaaaaaa... 2nd on a - -yyyyyyy... 1st on b - -xxxxxxx... 1st on a ------------------------------------------------------------------------ - ---graph:: - - Draw a text-based graphical representation of the commit history - on the left hand side of the output. This may cause extra lines - to be printed in between commits, in order for the graph history - to be drawn properly. -+ -This enables parent rewriting, see 'History Simplification' below. -+ -This implies the '--topo-order' option by default, but the -'--date-order' option may also be specified. - -ifdef::git-rev-list[] ---count:: - Print a number stating how many commits would have been - listed, and suppress all other output. When used together - with '--left-right', instead print the counts for left and - right commits, separated by a tab. -endif::git-rev-list[] - - -ifndef::git-rev-list[] -Diff Formatting -~~~~~~~~~~~~~~~ - -Below are listed options that control the formatting of diff output. -Some of them are specific to linkgit:git-rev-list[1], however other diff -options may be given. See linkgit:git-diff-files[1] for more options. - --c:: - - With this option, diff output for a merge commit - shows the differences from each of the parents to the merge result - simultaneously instead of showing pairwise diff between a parent - and the result one at a time. Furthermore, it lists only files - which were modified from all parents. - ---cc:: - - This flag implies the '-c' options and further compresses the - patch output by omitting uninteresting hunks whose contents in - the parents have only two variants and the merge result picks - one of them without modification. - --m:: - - This flag makes the merge commits show the full diff like - regular commits; for each merge parent, a separate log entry - and diff is generated. An exception is that only diff against - the first parent is shown when '--first-parent' option is given; - in that case, the output represents the changes the merge - brought _into_ the then-current branch. - --r:: - - Show recursive diffs. - --t:: - - Show the tree objects in the diff output. This implies '-r'. - --s:: - Suppress diff output. -endif::git-rev-list[] - Commit Limiting ~~~~~~~~~~~~~~~ Besides specifying a range of commits that should be listed using the special notations explained in the description, additional commit -limiting may be applied. +limiting may be applied. Note that they are applied before commit +ordering and formatting options, such as '--reverse'. -- -n 'number':: --max-count=<number>:: - Limit the number of commits output. + Limit the number of commits to output. --skip=<number>:: @@ -226,11 +72,26 @@ endif::git-rev-list[] --merges:: - Print only merge commits. + Print only merge commits. This is exactly the same as `--min-parents=2`. --no-merges:: - Do not print commits with more than one parent. + Do not print commits with more than one parent. This is + exactly the same as `--max-parents=1`. + +--min-parents=<number>:: +--max-parents=<number>:: +--no-min-parents:: +--no-max-parents:: + + Show only commits which have at least (or at most) that many + commits. In particular, `--max-parents=1` is the same as `--no-merges`, + `--min-parents=2` is the same as `--merges`. `--max-parents=0` + gives all root commits and `--min-parents=3` all octopus merges. ++ +`--no-min-parents` and `--no-max-parents` reset these limits (to no limit) +again. Equivalent forms are `--min-parents=0` (any commit has 0 or more +parents) and `--max-parents=-1` (negative numbers denote no upper limit). --first-parent:: Follow only the first parent commit upon seeing a merge @@ -305,6 +166,11 @@ ifdef::git-rev-list[] to /dev/null as the output does not have to be formatted. endif::git-rev-list[] +--cherry-mark:: + + Like `--cherry-pick` (see below) but mark equivalent commits + with `=` rather than omitting them, and inequivalent ones with `+`. + --cherry-pick:: Omit any commit that introduces the same change as @@ -313,12 +179,33 @@ endif::git-rev-list[] + For example, if you have two branches, `A` and `B`, a usual way to list all commits on only one side of them is with -`--left-right`, like the example above in the description of -that option. It however shows the commits that were cherry-picked +`--left-right` (see the example below in the description of +the `--left-right` option). It however shows the commits that were cherry-picked from the other branch (for example, "3rd on b" may be cherry-picked from branch A). With this option, such pairs of commits are excluded from the output. +--left-only:: +--right-only:: + + List only commits on the respective side of a symmetric range, + i.e. only those which would be marked `<` resp. `>` by + `--left-right`. ++ +For example, `--cherry-pick --right-only A...B` omits those +commits from `B` which are in `A` or are patch-equivalent to a commit in +`A`. In other words, this lists the `{plus}` commits from `git cherry A B`. +More precisely, `--cherry-pick --right-only --no-merges` gives the exact +list. + +--cherry:: + + A synonym for `--right-only --cherry-mark --no-merges`; useful to + limit the output to the commits on our side and mark those that + have been applied to the other side of a forked history with + `git log --cherry upstream...mybranch`, similar to + `git cherry upstream mybranch`. + -g:: --walk-reflogs:: @@ -735,3 +622,158 @@ These options are mostly targeted for packing of git repositories. --do-walk:: Overrides a previous --no-walk. + +Commit Formatting +~~~~~~~~~~~~~~~~~ + +ifdef::git-rev-list[] +Using these options, linkgit:git-rev-list[1] will act similar to the +more specialized family of commit log tools: linkgit:git-log[1], +linkgit:git-show[1], and linkgit:git-whatchanged[1] +endif::git-rev-list[] + +include::pretty-options.txt[] + +--relative-date:: + + Synonym for `--date=relative`. + +--date=(relative|local|default|iso|rfc|short|raw):: + + Only takes effect for dates shown in human-readable format, such + as when using "--pretty". `log.date` config variable sets a default + value for log command's --date option. ++ +`--date=relative` shows dates relative to the current time, +e.g. "2 hours ago". ++ +`--date=local` shows timestamps in user's local timezone. ++ +`--date=iso` (or `--date=iso8601`) shows timestamps in ISO 8601 format. ++ +`--date=rfc` (or `--date=rfc2822`) shows timestamps in RFC 2822 +format, often found in E-mail messages. ++ +`--date=short` shows only date but not time, in `YYYY-MM-DD` format. ++ +`--date=raw` shows the date in the internal raw git format `%s %z` format. ++ +`--date=default` shows timestamps in the original timezone +(either committer's or author's). + +ifdef::git-rev-list[] +--header:: + + Print the contents of the commit in raw-format; each record is + separated with a NUL character. +endif::git-rev-list[] + +--parents:: + + Print also the parents of the commit (in the form "commit parent..."). + Also enables parent rewriting, see 'History Simplification' below. + +--children:: + + Print also the children of the commit (in the form "commit child..."). + Also enables parent rewriting, see 'History Simplification' below. + +ifdef::git-rev-list[] +--timestamp:: + Print the raw commit timestamp. +endif::git-rev-list[] + +--left-right:: + + Mark which side of a symmetric diff a commit is reachable from. + Commits from the left side are prefixed with `<` and those from + the right with `>`. If combined with `--boundary`, those + commits are prefixed with `-`. ++ +For example, if you have this topology: ++ +----------------------------------------------------------------------- + y---b---b branch B + / \ / + / . + / / \ + o---x---a---a branch A +----------------------------------------------------------------------- ++ +you would get an output like this: ++ +----------------------------------------------------------------------- + $ git rev-list --left-right --boundary --pretty=oneline A...B + + >bbbbbbb... 3rd on b + >bbbbbbb... 2nd on b + <aaaaaaa... 3rd on a + <aaaaaaa... 2nd on a + -yyyyyyy... 1st on b + -xxxxxxx... 1st on a +----------------------------------------------------------------------- + +--graph:: + + Draw a text-based graphical representation of the commit history + on the left hand side of the output. This may cause extra lines + to be printed in between commits, in order for the graph history + to be drawn properly. ++ +This enables parent rewriting, see 'History Simplification' below. ++ +This implies the '--topo-order' option by default, but the +'--date-order' option may also be specified. + +ifdef::git-rev-list[] +--count:: + Print a number stating how many commits would have been + listed, and suppress all other output. When used together + with '--left-right', instead print the counts for left and + right commits, separated by a tab. +endif::git-rev-list[] + + +ifndef::git-rev-list[] +Diff Formatting +~~~~~~~~~~~~~~~ + +Below are listed options that control the formatting of diff output. +Some of them are specific to linkgit:git-rev-list[1], however other diff +options may be given. See linkgit:git-diff-files[1] for more options. + +-c:: + + With this option, diff output for a merge commit + shows the differences from each of the parents to the merge result + simultaneously instead of showing pairwise diff between a parent + and the result one at a time. Furthermore, it lists only files + which were modified from all parents. + +--cc:: + + This flag implies the '-c' options and further compresses the + patch output by omitting uninteresting hunks whose contents in + the parents have only two variants and the merge result picks + one of them without modification. + +-m:: + + This flag makes the merge commits show the full diff like + regular commits; for each merge parent, a separate log entry + and diff is generated. An exception is that only diff against + the first parent is shown when '--first-parent' option is given; + in that case, the output represents the changes the merge + brought _into_ the then-current branch. + +-r:: + + Show recursive diffs. + +-t:: + + Show the tree objects in the diff output. This implies '-r'. + +-s:: + Suppress diff output. +endif::git-rev-list[] diff --git a/Documentation/revisions.txt b/Documentation/revisions.txt index 9e92734bc1..b290b617d4 100644 --- a/Documentation/revisions.txt +++ b/Documentation/revisions.txt @@ -1,144 +1,163 @@ SPECIFYING REVISIONS -------------------- -A revision parameter typically, but not necessarily, names a -commit object. They use what is called an 'extended SHA1' +A revision parameter '<rev>' typically, but not necessarily, names a +commit object. It uses what is called an 'extended SHA1' syntax. Here are various ways to spell object names. The -ones listed near the end of this list are to name trees and +ones listed near the end of this list name trees and blobs contained in a commit. -* The full SHA1 object name (40-byte hexadecimal string), or - a substring of such that is unique within the repository. +'<sha1>', e.g. 'dae86e1950b1277e545cee180551750029cfe735', 'dae86e':: + The full SHA1 object name (40-byte hexadecimal string), or + a leading substring that is unique within the repository. E.g. dae86e1950b1277e545cee180551750029cfe735 and dae86e both - name the same commit object if there are no other object in + name the same commit object if there is no other object in your repository whose object name starts with dae86e. -* An output from 'git describe'; i.e. a closest tag, optionally +'<describeOutput>', e.g. 'v1.7.4.2-679-g3bee7fb':: + Output from `git describe`; i.e. a closest tag, optionally followed by a dash and a number of commits, followed by a dash, a - `g`, and an abbreviated object name. + 'g', and an abbreviated object name. -* A symbolic ref name. E.g. 'master' typically means the commit - object referenced by refs/heads/master. If you - happen to have both heads/master and tags/master, you can +'<refname>', e.g. 'master', 'heads/master', 'refs/heads/master':: + A symbolic ref name. E.g. 'master' typically means the commit + object referenced by 'refs/heads/master'. If you + happen to have both 'heads/master' and 'tags/master', you can explicitly say 'heads/master' to tell git which one you mean. - When ambiguous, a `<name>` is disambiguated by taking the + When ambiguous, a '<name>' is disambiguated by taking the first match in the following rules: - . if `$GIT_DIR/<name>` exists, that is what you mean (this is usually - useful only for `HEAD`, `FETCH_HEAD`, `ORIG_HEAD` and `MERGE_HEAD`); + . If '$GIT_DIR/<name>' exists, that is what you mean (this is usually + useful only for 'HEAD', 'FETCH_HEAD', 'ORIG_HEAD', 'MERGE_HEAD' + and 'CHERRY_PICK_HEAD'); - . otherwise, `refs/<name>` if exists; + . otherwise, 'refs/<name>' if it exists; - . otherwise, `refs/tags/<name>` if exists; + . otherwise, 'refs/tags/<refname>' if it exists; - . otherwise, `refs/heads/<name>` if exists; + . otherwise, 'refs/heads/<name>' if it exists; - . otherwise, `refs/remotes/<name>` if exists; + . otherwise, 'refs/remotes/<name>' if it exists; - . otherwise, `refs/remotes/<name>/HEAD` if exists. + . otherwise, 'refs/remotes/<name>/HEAD' if it exists. + -HEAD names the commit your changes in the working tree is based on. -FETCH_HEAD records the branch you fetched from a remote repository -with your last 'git fetch' invocation. -ORIG_HEAD is created by commands that moves your HEAD in a drastic -way, to record the position of the HEAD before their operation, so that -you can change the tip of the branch back to the state before you ran -them easily. -MERGE_HEAD records the commit(s) you are merging into your branch -when you run 'git merge'. +'HEAD' names the commit on which you based the changes in the working tree. +'FETCH_HEAD' records the branch which you fetched from a remote repository +with your last `git fetch` invocation. +'ORIG_HEAD' is created by commands that move your 'HEAD' in a drastic +way, to record the position of the 'HEAD' before their operation, so that +you can easily change the tip of the branch back to the state before you ran +them. +'MERGE_HEAD' records the commit(s) which you are merging into your branch +when you run `git merge`. +'CHERRY_PICK_HEAD' records the commit which you are cherry-picking +when you run `git cherry-pick`. + -Note that any of the `refs/*` cases above may come either from -the `$GIT_DIR/refs` directory or from the `$GIT_DIR/packed-refs` file. +Note that any of the 'refs/*' cases above may come either from +the '$GIT_DIR/refs' directory or from the '$GIT_DIR/packed-refs' file. -* A ref followed by the suffix '@' with a date specification +'<refname>@\{<date>\}', e.g. 'master@\{yesterday\}', 'HEAD@\{5 minutes ago\}':: + A ref followed by the suffix '@' with a date specification enclosed in a brace pair (e.g. '\{yesterday\}', '\{1 month 2 weeks 3 days 1 hour 1 - second ago\}' or '\{1979-02-26 18:30:00\}') to specify the value + second ago\}' or '\{1979-02-26 18:30:00\}') specifies the value of the ref at a prior point in time. This suffix may only be used immediately following a ref name and the ref must have an - existing log ($GIT_DIR/logs/<ref>). Note that this looks up the state + existing log ('$GIT_DIR/logs/<ref>'). Note that this looks up the state of your *local* ref at a given time; e.g., what was in your local - `master` branch last week. If you want to look at commits made during - certain times, see `--since` and `--until`. + 'master' branch last week. If you want to look at commits made during + certain times, see '--since' and '--until'. -* A ref followed by the suffix '@' with an ordinal specification - enclosed in a brace pair (e.g. '\{1\}', '\{15\}') to specify +'<refname>@\{<n>\}', e.g. 'master@\{1\}':: + A ref followed by the suffix '@' with an ordinal specification + enclosed in a brace pair (e.g. '\{1\}', '\{15\}') specifies the n-th prior value of that ref. For example 'master@\{1\}' is the immediate prior value of 'master' while 'master@\{5\}' is the 5th prior value of 'master'. This suffix may only be used immediately following a ref name and the ref must have an existing - log ($GIT_DIR/logs/<ref>). + log ('$GIT_DIR/logs/<refname>'). -* You can use the '@' construct with an empty ref part to get at a - reflog of the current branch. For example, if you are on the - branch 'blabla', then '@\{1\}' means the same as 'blabla@\{1\}'. +'@\{<n>\}', e.g. '@\{1\}':: + You can use the '@' construct with an empty ref part to get at a + reflog entry of the current branch. For example, if you are on + branch 'blabla' then '@\{1\}' means the same as 'blabla@\{1\}'. -* The special construct '@\{-<n>\}' means the <n>th branch checked out +'@\{-<n>\}', e.g. '@\{-1\}':: + The construct '@\{-<n>\}' means the <n>th branch checked out before the current one. -* The suffix '@\{upstream\}' to a ref (short form 'ref@\{u\}') refers to - the branch the ref is set to build on top of. Missing ref defaults +'<refname>@\{upstream\}', e.g. 'master@\{upstream\}', '@\{u\}':: + The suffix '@\{upstream\}' to a ref (short form '<refname>@\{u\}') refers to + the branch the ref is set to build on top of. A missing ref defaults to the current branch. -* A suffix '{caret}' to a revision parameter (e.g. 'HEAD{caret}') means the first parent of +'<rev>{caret}', e.g. 'HEAD{caret}, v1.5.1{caret}0':: + A suffix '{caret}' to a revision parameter means the first parent of that commit object. '{caret}<n>' means the <n>th parent (i.e. - 'rev{caret}' - is equivalent to 'rev{caret}1'). As a special rule, - 'rev{caret}0' means the commit itself and is used when 'rev' is the + '<rev>{caret}' + is equivalent to '<rev>{caret}1'). As a special rule, + '<rev>{caret}0' means the commit itself and is used when '<rev>' is the object name of a tag object that refers to a commit object. -* A suffix '{tilde}<n>' to a revision parameter means the commit +'<rev>{tilde}<n>', e.g. 'master{tilde}3':: + A suffix '{tilde}<n>' to a revision parameter means the commit object that is the <n>th generation grand-parent of the named - commit object, following only the first parent. I.e. rev~3 is - equivalent to rev{caret}{caret}{caret} which is equivalent to - rev{caret}1{caret}1{caret}1. See below for a illustration of + commit object, following only the first parents. I.e. '<rev>{tilde}3' is + equivalent to '<rev>{caret}{caret}{caret}' which is equivalent to + '<rev>{caret}1{caret}1{caret}1'. See below for an illustration of the usage of this form. -* A suffix '{caret}' followed by an object type name enclosed in - brace pair (e.g. `v0.99.8{caret}\{commit\}`) means the object +'<rev>{caret}\{<type>\}', e.g. 'v0.99.8{caret}\{commit\}':: + A suffix '{caret}' followed by an object type name enclosed in + brace pair means the object could be a tag, and dereference the tag recursively until an object of that type is found or the object cannot be - dereferenced anymore (in which case, barf). `rev{caret}0` - introduced earlier is a short-hand for `rev{caret}\{commit\}`. + dereferenced anymore (in which case, barf). '<rev>{caret}0' + is a short-hand for '<rev>{caret}\{commit\}'. -* A suffix '{caret}' followed by an empty brace pair - (e.g. `v0.99.8{caret}\{\}`) means the object could be a tag, +'<rev>{caret}\{\}', e.g. 'v0.99.8{caret}\{\}':: + A suffix '{caret}' followed by an empty brace pair + means the object could be a tag, and dereference the tag recursively until a non-tag object is found. -* A suffix '{caret}' to a revision parameter followed by a brace - pair that contains a text led by a slash (e.g. `HEAD^{/fix nasty bug}`): - this is the same as `:/fix nasty bug` syntax below except that +'<rev>{caret}\{/<text>\}', e.g. 'HEAD^{/fix nasty bug}':: + A suffix '{caret}' to a revision parameter, followed by a brace + pair that contains a text led by a slash, + is the same as the ':/fix nasty bug' syntax below except that it returns the youngest matching commit which is reachable from - the ref before '{caret}'. + the '<rev>' before '{caret}'. -* A colon, followed by a slash, followed by a text (e.g. `:/fix nasty bug`): this names +':/<text>', e.g. ':/fix nasty bug':: + A colon, followed by a slash, followed by a text, names a commit whose commit message matches the specified regular expression. This name returns the youngest matching commit which is reachable from any ref. If the commit message starts with a - '!', you have to repeat that; the special sequence ':/!', - followed by something else than '!' is reserved for now. + '!' you have to repeat that; the special sequence ':/!', + followed by something else than '!', is reserved for now. The regular expression can match any part of the commit message. To - match messages starting with a string, one can use e.g. `:/^foo`. + match messages starting with a string, one can use e.g. ':/^foo'. -* A suffix ':' followed by a path (e.g. `HEAD:README`); this names the blob or tree +'<rev>:<path>', e.g. 'HEAD:README', ':README', 'master:./README':: + A suffix ':' followed by a path names the blob or tree at the given path in the tree-ish object named by the part before the colon. - ':path' (with an empty part before the colon, e.g. `:README`) + ':path' (with an empty part before the colon) is a special case of the syntax described next: content recorded in the index at the given path. - A path starting with './' or '../' is relative to current working directory. - The given path will be converted to be relative to working tree's root directory. + A path starting with './' or '../' is relative to the current working directory. + The given path will be converted to be relative to the working tree's root directory. This is most useful to address a blob or tree from a commit or tree that has - the same tree structure with the working tree. + the same tree structure as the working tree. -* A colon, optionally followed by a stage number (0 to 3) and a - colon, followed by a path (e.g. `:0:README`); this names a blob object in the - index at the given path. Missing stage number (and the colon - that follows it, e.g. `:README`) names a stage 0 entry. During a merge, stage +':<n>:<path>', e.g. ':0:README', ':README':: + A colon, optionally followed by a stage number (0 to 3) and a + colon, followed by a path, names a blob object in the + index at the given path. A missing stage number (and the colon + that follows it) names a stage 0 entry. During a merge, stage 1 is the common ancestor, stage 2 is the target branch's version (typically the current branch), and stage 3 is the version from - the branch being merged. + the branch which is being merged. Here is an illustration, by Jon Loeliger. Both commit nodes B and C are parents of commit node A. Parent commits are ordered @@ -172,31 +191,31 @@ G H I J SPECIFYING RANGES ----------------- -History traversing commands such as 'git log' operate on a set +History traversing commands such as `git log` operate on a set of commits, not just a single commit. To these commands, specifying a single revision with the notation described in the previous section means the set of commits reachable from that commit, following the commit ancestry chain. -To exclude commits reachable from a commit, a prefix `{caret}` -notation is used. E.g. `{caret}r1 r2` means commits reachable -from `r2` but exclude the ones reachable from `r1`. +To exclude commits reachable from a commit, a prefix '{caret}' +notation is used. E.g. '{caret}r1 r2' means commits reachable +from 'r2' but exclude the ones reachable from 'r1'. This set operation appears so often that there is a shorthand -for it. When you have two commits `r1` and `r2` (named according +for it. When you have two commits 'r1' and 'r2' (named according to the syntax explained in SPECIFYING REVISIONS above), you can ask for commits that are reachable from r2 excluding those that are reachable -from r1 by `{caret}r1 r2` and it can be written as `r1..r2`. +from r1 by '{caret}r1 r2' and it can be written as 'r1..r2'. -A similar notation `r1\...r2` is called symmetric difference -of `r1` and `r2` and is defined as -`r1 r2 --not $(git merge-base --all r1 r2)`. +A similar notation 'r1\...r2' is called symmetric difference +of 'r1' and 'r2' and is defined as +'r1 r2 --not $(git merge-base --all r1 r2)'. It is the set of commits that are reachable from either one of -`r1` or `r2` but not from both. +'r1' or 'r2' but not from both. Two other shorthands for naming a set that is formed by a commit -and its parent commits exist. The `r1{caret}@` notation means all -parents of `r1`. `r1{caret}!` includes commit `r1` but excludes +and its parent commits exist. The 'r1{caret}@' notation means all +parents of 'r1'. 'r1{caret}!' includes commit 'r1' but excludes all of its parents. Here are a handful of examples: diff --git a/Documentation/technical/index-format.txt b/Documentation/technical/index-format.txt new file mode 100644 index 0000000000..7b233ca196 --- /dev/null +++ b/Documentation/technical/index-format.txt @@ -0,0 +1,185 @@ +GIT index format +================ + += The git index file has the following format + + All binary numbers are in network byte order. Version 2 is described + here unless stated otherwise. + + - A 12-byte header consisting of + + 4-byte signature: + The signature is { 'D', 'I', 'R', 'C' } (stands for "dircache") + + 4-byte version number: + The current supported versions are 2 and 3. + + 32-bit number of index entries. + + - A number of sorted index entries (see below). + + - Extensions + + Extensions are identified by signature. Optional extensions can + be ignored if GIT does not understand them. + + GIT currently supports cached tree and resolve undo extensions. + + 4-byte extension signature. If the first byte is 'A'..'Z' the + extension is optional and can be ignored. + + 32-bit size of the extension + + Extension data + + - 160-bit SHA-1 over the content of the index file before this + checksum. + +== Index entry + + Index entries are sorted in ascending order on the name field, + interpreted as a string of unsigned bytes (i.e. memcmp() order, no + localization, no special casing of directory separator '/'). Entries + with the same name are sorted by their stage field. + + 32-bit ctime seconds, the last time a file's metadata changed + this is stat(2) data + + 32-bit ctime nanosecond fractions + this is stat(2) data + + 32-bit mtime seconds, the last time a file's data changed + this is stat(2) data + + 32-bit mtime nanosecond fractions + this is stat(2) data + + 32-bit dev + this is stat(2) data + + 32-bit ino + this is stat(2) data + + 32-bit mode, split into (high to low bits) + + 4-bit object type + valid values in binary are 1000 (regular file), 1010 (symbolic link) + and 1110 (gitlink) + + 3-bit unused + + 9-bit unix permission. Only 0755 and 0644 are valid for regular files. + Symbolic links and gitlinks have value 0 in this field. + + 32-bit uid + this is stat(2) data + + 32-bit gid + this is stat(2) data + + 32-bit file size + This is the on-disk size from stat(2), truncated to 32-bit. + + 160-bit SHA-1 for the represented object + + A 16-bit 'flags' field split into (high to low bits) + + 1-bit assume-valid flag + + 1-bit extended flag (must be zero in version 2) + + 2-bit stage (during merge) + + 12-bit name length if the length is less than 0xFFF; otherwise 0xFFF + is stored in this field. + + (Version 3) A 16-bit field, only applicable if the "extended flag" + above is 1, split into (high to low bits). + + 1-bit reserved for future + + 1-bit skip-worktree flag (used by sparse checkout) + + 1-bit intent-to-add flag (used by "git add -N") + + 13-bit unused, must be zero + + Entry path name (variable length) relative to top level directory + (without leading slash). '/' is used as path separator. The special + path components ".", ".." and ".git" (without quotes) are disallowed. + Trailing slash is also disallowed. + + The exact encoding is undefined, but the '.' and '/' characters + are encoded in 7-bit ASCII and the encoding cannot contain a NUL + byte (iow, this is a UNIX pathname). + + 1-8 nul bytes as necessary to pad the entry to a multiple of eight bytes + while keeping the name NUL-terminated. + +== Extensions + +=== Cached tree + + Cached tree extension contains pre-computed hashes for trees that can + be derived from the index. It helps speed up tree object generation + from index for a new commit. + + When a path is updated in index, the path must be invalidated and + removed from tree cache. + + The signature for this extension is { 'T', 'R', 'E', 'E' }. + + A series of entries fill the entire extension; each of which + consists of: + + - NUL-terminated path component (relative to its parent directory); + + - ASCII decimal number of entries in the index that is covered by the + tree this entry represents (entry_count); + + - A space (ASCII 32); + + - ASCII decimal number that represents the number of subtrees this + tree has; + + - A newline (ASCII 10); and + + - 160-bit object name for the object that would result from writing + this span of index as a tree. + + An entry can be in an invalidated state and is represented by having -1 + in the entry_count field. + + The entries are written out in the top-down, depth-first order. The + first entry represents the root level of the repository, followed by the + first subtree---let's call this A---of the root level (with its name + relative to the root level), followed by the first subtree of A (with + its name relative to A), ... + +=== Resolve undo + + A conflict is represented in the index as a set of higher stage entries. + When a conflict is resolved (e.g. with "git add path"), these higher + stage entries will be removed and a stage-0 entry with proper resoluton + is added. + + When these higher stage entries are removed, they are saved in the + resolve undo extension, so that conflicts can be recreated (e.g. with + "git checkout -m"), in case users want to redo a conflict resolution + from scratch. + + The signature for this extension is { 'R', 'E', 'U', 'C' }. + + A series of entries fill the entire extension; each of which + consists of: + + - NUL-terminated pathname the entry describes (relative to the root of + the repository, i.e. full pathname); + + - Three NUL-terminated ASCII octal numbers, entry mode of entries in + stage 1 to 3 (a missing stage is represented by "0" in this field); + and + + - At most three 160-bit object names of the entry in stages from 1 to 3 + (nothing is written for a missing stage). + |