diff options
Diffstat (limited to 'Documentation')
132 files changed, 2131 insertions, 3104 deletions
diff --git a/Documentation/CodingGuidelines b/Documentation/CodingGuidelines index f45db5b727..ed4e443a3c 100644 --- a/Documentation/CodingGuidelines +++ b/Documentation/CodingGuidelines @@ -75,7 +75,7 @@ For shell scripts specifically (not exhaustive): - If you want to find out if a command is available on the user's $PATH, you should use 'type <command>', instead of 'which <command>'. - The output of 'which' is not machine parseable and its exit code + The output of 'which' is not machine parsable and its exit code is not reliable across platforms. - We use POSIX compliant parameter substitutions and avoid bashisms; @@ -203,7 +203,7 @@ For C programs: . since early 2012 with e1327023ea, we have been using an enum definition whose last element is followed by a comma. This, like an array initializer that ends with a trailing comma, can be used - to reduce the patch noise when adding a new identifer at the end. + to reduce the patch noise when adding a new identifier at the end. . since mid 2017 with cbc0f81d, we have been using designated initializers for struct (e.g. "struct t v = { .val = 'a' };"). diff --git a/Documentation/Makefile b/Documentation/Makefile index 06d85ad958..8fe829cc1b 100644 --- a/Documentation/Makefile +++ b/Documentation/Makefile @@ -77,6 +77,7 @@ API_DOCS = $(patsubst %.txt,%,$(filter-out technical/api-index-skel.txt technica SP_ARTICLES += $(API_DOCS) TECH_DOCS += MyFirstContribution +TECH_DOCS += MyFirstObjectWalk TECH_DOCS += SubmittingPatches TECH_DOCS += technical/hash-function-transition TECH_DOCS += technical/http-protocol diff --git a/Documentation/MyFirstContribution.txt b/Documentation/MyFirstContribution.txt index 5e9b808f5f..35b9130aa3 100644 --- a/Documentation/MyFirstContribution.txt +++ b/Documentation/MyFirstContribution.txt @@ -38,6 +38,26 @@ $ git clone https://github.com/git/git git $ cd git ---- +[[dependencies]] +=== Installing Dependencies + +To build Git from source, you need to have a handful of dependencies installed +on your system. For a hint of what's needed, you can take a look at +`INSTALL`, paying close attention to the section about Git's dependencies on +external programs and libraries. That document mentions a way to "test-drive" +our freshly built Git without installing; that's the method we'll be using in +this tutorial. + +Make sure that your environment has everything you need by building your brand +new clone of Git from the above step: + +---- +$ make +---- + +NOTE: The Git build is parallelizable. `-j#` is not included above but you can +use it as you prefer, here and elsewhere. + [[identify-problem]] === Identify Problem to Solve @@ -138,9 +158,6 @@ NOTE: When you are developing the Git project, it's preferred that you use the `DEVELOPER` flag; if there's some reason it doesn't work for you, you can turn it off, but it's a good idea to mention the problem to the mailing list. -NOTE: The Git build is parallelizable. `-j#` is not included above but you can -use it as you prefer, here and elsewhere. - Great, now your new command builds happily on its own. But nobody invokes it. Let's change that. @@ -534,6 +551,28 @@ you want to pass as a parameter something which would usually be interpreted as a flag.) `parse_options()` will terminate parsing when it reaches `--` and give you the rest of the options afterwards, untouched. +Now that you have a usage hint, you can teach Git how to show it in the general +command list shown by `git help git` or `git help -a`, which is generated from +`command-list.txt`. Find the line for 'git-pull' so you can add your 'git-psuh' +line above it in alphabetical order. Now, we can add some attributes about the +command which impacts where it shows up in the aforementioned help commands. The +top of `command-list.txt` shares some information about what each attribute +means; in those help pages, the commands are sorted according to these +attributes. `git psuh` is user-facing, or porcelain - so we will mark it as +"mainporcelain". For "mainporcelain" commands, the comments at the top of +`command-list.txt` indicate we can also optionally add an attribute from another +list; since `git psuh` shows some information about the user's workspace but +doesn't modify anything, let's mark it as "info". Make sure to keep your +attributes in the same style as the rest of `command-list.txt` using spaces to +align and delineate them: + +---- +git-prune-packed plumbingmanipulators +git-psuh mainporcelain info +git-pull mainporcelain remote +git-push mainporcelain remote +---- + Build again. Now, when you run with `-h`, you should see your usage printed and your command terminated before anything else interesting happens. Great! @@ -746,6 +785,14 @@ will automatically run your PRs through the CI even without the permission given but you will not be able to `/submit` your changes until someone allows you to use the tool. +NOTE: You can typically find someone who can `/allow` you on GitGitGadget by +either examining recent pull requests where someone has been granted `/allow` +(https://github.com/gitgitgadget/git/pulls?utf8=%E2%9C%93&q=is%3Apr+is%3Aopen+%22%2Fallow%22[Search: +is:pr is:open "/allow"]), in which case both the author and the person who +granted the `/allow` can now `/allow` you, or by inquiring on the +https://webchat.freenode.net/#git-devel[#git-devel] IRC channel on Freenode +linking your pull request and asking for someone to `/allow` you. + If the CI fails, you can update your changes with `git rebase -i` and push your branch again: @@ -970,7 +1017,7 @@ reviewers the changes you've made that may not be as visible. You will also need to go and find the Message-Id of your previous cover letter. You can either note it when you send the first series, from the output of `git send-email`, or you can look it up on the -https://public-inbox.org/git[mailing list]. Find your cover letter in the +https://lore.kernel.org/git[mailing list]. Find your cover letter in the archives, click on it, then click "permalink" or "raw" to reveal the Message-Id header. It should match: diff --git a/Documentation/MyFirstObjectWalk.txt b/Documentation/MyFirstObjectWalk.txt new file mode 100644 index 0000000000..aa828dfdc4 --- /dev/null +++ b/Documentation/MyFirstObjectWalk.txt @@ -0,0 +1,905 @@ += My First Object Walk + +== What's an Object Walk? + +The object walk is a key concept in Git - this is the process that underpins +operations like object transfer and fsck. Beginning from a given commit, the +list of objects is found by walking parent relationships between commits (commit +X based on commit W) and containment relationships between objects (tree Y is +contained within commit X, and blob Z is located within tree Y, giving our +working tree for commit X something like `y/z.txt`). + +A related concept is the revision walk, which is focused on commit objects and +their parent relationships and does not delve into other object types. The +revision walk is used for operations like `git log`. + +=== Related Reading + +- `Documentation/user-manual.txt` under "Hacking Git" contains some coverage of + the revision walker in its various incarnations. +- `revision.h` +- https://eagain.net/articles/git-for-computer-scientists/[Git for Computer Scientists] + gives a good overview of the types of objects in Git and what your object + walk is really describing. + +== Setting Up + +Create a new branch from `master`. + +---- +git checkout -b revwalk origin/master +---- + +We'll put our fiddling into a new command. For fun, let's name it `git walken`. +Open up a new file `builtin/walken.c` and set up the command handler: + +---- +/* + * "git walken" + * + * Part of the "My First Object Walk" tutorial. + */ + +#include "builtin.h" + +int cmd_walken(int argc, const char **argv, const char *prefix) +{ + trace_printf(_("cmd_walken incoming...\n")); + return 0; +} +---- + +NOTE: `trace_printf()` differs from `printf()` in that it can be turned on or +off at runtime. For the purposes of this tutorial, we will write `walken` as +though it is intended for use as a "plumbing" command: that is, a command which +is used primarily in scripts, rather than interactively by humans (a "porcelain" +command). So we will send our debug output to `trace_printf()` instead. When +running, enable trace output by setting the environment variable `GIT_TRACE`. + +Add usage text and `-h` handling, like all subcommands should consistently do +(our test suite will notice and complain if you fail to do so). + +---- +int cmd_walken(int argc, const char **argv, const char *prefix) +{ + const char * const walken_usage[] = { + N_("git walken"), + NULL, + } + struct option options[] = { + OPT_END() + }; + + argc = parse_options(argc, argv, prefix, options, walken_usage, 0); + + ... +} +---- + +Also add the relevant line in `builtin.h` near `cmd_whatchanged()`: + +---- +int cmd_walken(int argc, const char **argv, const char *prefix); +---- + +Include the command in `git.c` in `commands[]` near the entry for `whatchanged`, +maintaining alphabetical ordering: + +---- +{ "walken", cmd_walken, RUN_SETUP }, +---- + +Add it to the `Makefile` near the line for `builtin/worktree.o`: + +---- +BUILTIN_OBJS += builtin/walken.o +---- + +Build and test out your command, without forgetting to ensure the `DEVELOPER` +flag is set, and with `GIT_TRACE` enabled so the debug output can be seen: + +---- +$ echo DEVELOPER=1 >>config.mak +$ make +$ GIT_TRACE=1 ./bin-wrappers/git walken +---- + +NOTE: For a more exhaustive overview of the new command process, take a look at +`Documentation/MyFirstContribution.txt`. + +NOTE: A reference implementation can be found at +https://github.com/nasamuffin/git/tree/revwalk. + +=== `struct rev_cmdline_info` + +The definition of `struct rev_cmdline_info` can be found in `revision.h`. + +This struct is contained within the `rev_info` struct and is used to reflect +parameters provided by the user over the CLI. + +`nr` represents the number of `rev_cmdline_entry` present in the array. + +`alloc` is used by the `ALLOC_GROW` macro. Check `cache.h` - this variable is +used to track the allocated size of the list. + +Per entry, we find: + +`item` is the object provided upon which to base the object walk. Items in Git +can be blobs, trees, commits, or tags. (See `Documentation/gittutorial-2.txt`.) + +`name` is the object ID (OID) of the object - a hex string you may be familiar +with from using Git to organize your source in the past. Check the tutorial +mentioned above towards the top for a discussion of where the OID can come +from. + +`whence` indicates some information about what to do with the parents of the +specified object. We'll explore this flag more later on; take a look at +`Documentation/revisions.txt` to get an idea of what could set the `whence` +value. + +`flags` are used to hint the beginning of the revision walk and are the first +block under the `#include`s in `revision.h`. The most likely ones to be set in +the `rev_cmdline_info` are `UNINTERESTING` and `BOTTOM`, but these same flags +can be used during the walk, as well. + +=== `struct rev_info` + +This one is quite a bit longer, and many fields are only used during the walk +by `revision.c` - not configuration options. Most of the configurable flags in +`struct rev_info` have a mirror in `Documentation/rev-list-options.txt`. It's a +good idea to take some time and read through that document. + +== Basic Commit Walk + +First, let's see if we can replicate the output of `git log --oneline`. We'll +refer back to the implementation frequently to discover norms when performing +an object walk of our own. + +To do so, we'll first find all the commits, in order, which preceded the current +commit. We'll extract the name and subject of the commit from each. + +Ideally, we will also be able to find out which ones are currently at the tip of +various branches. + +=== Setting Up + +Preparing for your object walk has some distinct stages. + +1. Perform default setup for this mode, and others which may be invoked. +2. Check configuration files for relevant settings. +3. Set up the `rev_info` struct. +4. Tweak the initialized `rev_info` to suit the current walk. +5. Prepare the `rev_info` for the walk. +6. Iterate over the objects, processing each one. + +==== Default Setups + +Before examining configuration files which may modify command behavior, set up +default state for switches or options your command may have. If your command +utilizes other Git components, ask them to set up their default states as well. +For instance, `git log` takes advantage of `grep` and `diff` functionality, so +its `init_log_defaults()` sets its own state (`decoration_style`) and asks +`grep` and `diff` to initialize themselves by calling each of their +initialization functions. + +For our first example within `git walken`, we don't intend to use any other +components within Git, and we don't have any configuration to do. However, we +may want to add some later, so for now, we can add an empty placeholder. Create +a new function in `builtin/walken.c`: + +---- +static void init_walken_defaults(void) +{ + /* + * We don't actually need the same components `git log` does; leave this + * empty for now. + */ +} +---- + +Make sure to add a line invoking it inside of `cmd_walken()`. + +---- +int cmd_walken(int argc, const char **argv, const char *prefix) +{ + init_walken_defaults(); +} +---- + +==== Configuring From `.gitconfig` + +Next, we should have a look at any relevant configuration settings (i.e., +settings readable and settable from `git config`). This is done by providing a +callback to `git_config()`; within that callback, you can also invoke methods +from other components you may need that need to intercept these options. Your +callback will be invoked once per each configuration value which Git knows about +(global, local, worktree, etc.). + +Similarly to the default values, we don't have anything to do here yet +ourselves; however, we should call `git_default_config()` if we aren't calling +any other existing config callbacks. + +Add a new function to `builtin/walken.c`: + +---- +static int git_walken_config(const char *var, const char *value, void *cb) +{ + /* + * For now, we don't have any custom configuration, so fall back to + * the default config. + */ + return git_default_config(var, value, cb); +} +---- + +Make sure to invoke `git_config()` with it in your `cmd_walken()`: + +---- +int cmd_walken(int argc, const char **argv, const char *prefix) +{ + ... + + git_config(git_walken_config, NULL); + + ... +} +---- + +==== Setting Up `rev_info` + +Now that we've gathered external configuration and options, it's time to +initialize the `rev_info` object which we will use to perform the walk. This is +typically done by calling `repo_init_revisions()` with the repository you intend +to target, as well as the `prefix` argument of `cmd_walken` and your `rev_info` +struct. + +Add the `struct rev_info` and the `repo_init_revisions()` call: +---- +int cmd_walken(int argc, const char **argv, const char *prefix) +{ + /* This can go wherever you like in your declarations.*/ + struct rev_info rev; + ... + + /* This should go after the git_config() call. */ + repo_init_revisions(the_repository, &rev, prefix); + + ... +} +---- + +==== Tweaking `rev_info` For the Walk + +We're getting close, but we're still not quite ready to go. Now that `rev` is +initialized, we can modify it to fit our needs. This is usually done within a +helper for clarity, so let's add one: + +---- +static void final_rev_info_setup(struct rev_info *rev) +{ + /* + * We want to mimic the appearance of `git log --oneline`, so let's + * force oneline format. + */ + get_commit_format("oneline", rev); + + /* Start our object walk at HEAD. */ + add_head_to_pending(rev); +} +---- + +[NOTE] +==== +Instead of using the shorthand `add_head_to_pending()`, you could do +something like this: +---- + struct setup_revision_opt opt; + + memset(&opt, 0, sizeof(opt)); + opt.def = "HEAD"; + opt.revarg_opt = REVARG_COMMITTISH; + setup_revisions(argc, argv, rev, &opt); +---- +Using a `setup_revision_opt` gives you finer control over your walk's starting +point. +==== + +Then let's invoke `final_rev_info_setup()` after the call to +`repo_init_revisions()`: + +---- +int cmd_walken(int argc, const char **argv, const char *prefix) +{ + ... + + final_rev_info_setup(&rev); + + ... +} +---- + +Later, we may wish to add more arguments to `final_rev_info_setup()`. But for +now, this is all we need. + +==== Preparing `rev_info` For the Walk + +Now that `rev` is all initialized and configured, we've got one more setup step +before we get rolling. We can do this in a helper, which will both prepare the +`rev_info` for the walk, and perform the walk itself. Let's start the helper +with the call to `prepare_revision_walk()`, which can return an error without +dying on its own: + +---- +static void walken_commit_walk(struct rev_info *rev) +{ + if (prepare_revision_walk(rev)) + die(_("revision walk setup failed")); +} +---- + +NOTE: `die()` prints to `stderr` and exits the program. Since it will print to +`stderr` it's likely to be seen by a human, so we will localize it. + +==== Performing the Walk! + +Finally! We are ready to begin the walk itself. Now we can see that `rev_info` +can also be used as an iterator; we move to the next item in the walk by using +`get_revision()` repeatedly. Add the listed variable declarations at the top and +the walk loop below the `prepare_revision_walk()` call within your +`walken_commit_walk()`: + +---- +static void walken_commit_walk(struct rev_info *rev) +{ + struct commit *commit; + struct strbuf prettybuf = STRBUF_INIT; + + ... + + while ((commit = get_revision(rev))) { + if (!commit) + continue; + + strbuf_reset(&prettybuf); + pp_commit_easy(CMIT_FMT_ONELINE, commit, &prettybuf); + puts(prettybuf.buf); + } + strbuf_release(&prettybuf); +} +---- + +NOTE: `puts()` prints a `char*` to `stdout`. Since this is the part of the +command we expect to be machine-parsed, we're sending it directly to stdout. + +Give it a shot. + +---- +$ make +$ ./bin-wrappers/git walken +---- + +You should see all of the subject lines of all the commits in +your tree's history, in order, ending with the initial commit, "Initial revision +of "git", the information manager from hell". Congratulations! You've written +your first revision walk. You can play with printing some additional fields +from each commit if you're curious; have a look at the functions available in +`commit.h`. + +=== Adding a Filter + +Next, let's try to filter the commits we see based on their author. This is +equivalent to running `git log --author=<pattern>`. We can add a filter by +modifying `rev_info.grep_filter`, which is a `struct grep_opt`. + +First some setup. Add `init_grep_defaults()` to `init_walken_defaults()` and add +`grep_config()` to `git_walken_config()`: + +---- +static void init_walken_defaults(void) +{ + init_grep_defaults(the_repository); +} + +... + +static int git_walken_config(const char *var, const char *value, void *cb) +{ + grep_config(var, value, cb); + return git_default_config(var, value, cb); +} +---- + +Next, we can modify the `grep_filter`. This is done with convenience functions +found in `grep.h`. For fun, we're filtering to only commits from folks using a +`gmail.com` email address - a not-very-precise guess at who may be working on +Git as a hobby. Since we're checking the author, which is a specific line in the +header, we'll use the `append_header_grep_pattern()` helper. We can use +the `enum grep_header_field` to indicate which part of the commit header we want +to search. + +In `final_rev_info_setup()`, add your filter line: + +---- +static void final_rev_info_setup(int argc, const char **argv, + const char *prefix, struct rev_info *rev) +{ + ... + + append_header_grep_pattern(&rev->grep_filter, GREP_HEADER_AUTHOR, + "gmail"); + compile_grep_patterns(&rev->grep_filter); + + ... +} +---- + +`append_header_grep_pattern()` adds your new "gmail" pattern to `rev_info`, but +it won't work unless we compile it with `compile_grep_patterns()`. + +NOTE: If you are using `setup_revisions()` (for example, if you are passing a +`setup_revision_opt` instead of using `add_head_to_pending()`), you don't need +to call `compile_grep_patterns()` because `setup_revisions()` calls it for you. + +NOTE: We could add the same filter via the `append_grep_pattern()` helper if we +wanted to, but `append_header_grep_pattern()` adds the `enum grep_context` and +`enum grep_pat_token` for us. + +=== Changing the Order + +There are a few ways that we can change the order of the commits during a +revision walk. Firstly, we can use the `enum rev_sort_order` to choose from some +typical orderings. + +`topo_order` is the same as `git log --topo-order`: we avoid showing a parent +before all of its children have been shown, and we avoid mixing commits which +are in different lines of history. (`git help log`'s section on `--topo-order` +has a very nice diagram to illustrate this.) + +Let's see what happens when we run with `REV_SORT_BY_COMMIT_DATE` as opposed to +`REV_SORT_BY_AUTHOR_DATE`. Add the following: + +---- +static void final_rev_info_setup(int argc, const char **argv, + const char *prefix, struct rev_info *rev) +{ + ... + + rev->topo_order = 1; + rev->sort_order = REV_SORT_BY_COMMIT_DATE; + + ... +} +---- + +Let's output this into a file so we can easily diff it with the walk sorted by +author date. + +---- +$ make +$ ./bin-wrappers/git walken > commit-date.txt +---- + +Then, let's sort by author date and run it again. + +---- +static void final_rev_info_setup(int argc, const char **argv, + const char *prefix, struct rev_info *rev) +{ + ... + + rev->topo_order = 1; + rev->sort_order = REV_SORT_BY_AUTHOR_DATE; + + ... +} +---- + +---- +$ make +$ ./bin-wrappers/git walken > author-date.txt +---- + +Finally, compare the two. This is a little less helpful without object names or +dates, but hopefully we get the idea. + +---- +$ diff -u commit-date.txt author-date.txt +---- + +This display indicates that commits can be reordered after they're written, for +example with `git rebase`. + +Let's try one more reordering of commits. `rev_info` exposes a `reverse` flag. +Set that flag somewhere inside of `final_rev_info_setup()`: + +---- +static void final_rev_info_setup(int argc, const char **argv, const char *prefix, + struct rev_info *rev) +{ + ... + + rev->reverse = 1; + + ... +} +---- + +Run your walk again and note the difference in order. (If you remove the grep +pattern, you should see the last commit this call gives you as your current +HEAD.) + +== Basic Object Walk + +So far we've been walking only commits. But Git has more types of objects than +that! Let's see if we can walk _all_ objects, and find out some information +about each one. + +We can base our work on an example. `git pack-objects` prepares all kinds of +objects for packing into a bitmap or packfile. The work we are interested in +resides in `builtins/pack-objects.c:get_object_list()`; examination of that +function shows that the all-object walk is being performed by +`traverse_commit_list()` or `traverse_commit_list_filtered()`. Those two +functions reside in `list-objects.c`; examining the source shows that, despite +the name, these functions traverse all kinds of objects. Let's have a look at +the arguments to `traverse_commit_list_filtered()`, which are a superset of the +arguments to the unfiltered version. + +- `struct list_objects_filter_options *filter_options`: This is a struct which + stores a filter-spec as outlined in `Documentation/rev-list-options.txt`. +- `struct rev_info *revs`: This is the `rev_info` used for the walk. +- `show_commit_fn show_commit`: A callback which will be used to handle each + individual commit object. +- `show_object_fn show_object`: A callback which will be used to handle each + non-commit object (so each blob, tree, or tag). +- `void *show_data`: A context buffer which is passed in turn to `show_commit` + and `show_object`. +- `struct oidset *omitted`: A linked-list of object IDs which the provided + filter caused to be omitted. + +It looks like this `traverse_commit_list_filtered()` uses callbacks we provide +instead of needing us to call it repeatedly ourselves. Cool! Let's add the +callbacks first. + +For the sake of this tutorial, we'll simply keep track of how many of each kind +of object we find. At file scope in `builtin/walken.c` add the following +tracking variables: + +---- +static int commit_count; +static int tag_count; +static int blob_count; +static int tree_count; +---- + +Commits are handled by a different callback than other objects; let's do that +one first: + +---- +static void walken_show_commit(struct commit *cmt, void *buf) +{ + commit_count++; +} +---- + +The `cmt` argument is fairly self-explanatory. But it's worth mentioning that +the `buf` argument is actually the context buffer that we can provide to the +traversal calls - `show_data`, which we mentioned a moment ago. + +Since we have the `struct commit` object, we can look at all the same parts that +we looked at in our earlier commit-only walk. For the sake of this tutorial, +though, we'll just increment the commit counter and move on. + +The callback for non-commits is a little different, as we'll need to check +which kind of object we're dealing with: + +---- +static void walken_show_object(struct object *obj, const char *str, void *buf) +{ + switch (obj->type) { + case OBJ_TREE: + tree_count++; + break; + case OBJ_BLOB: + blob_count++; + break; + case OBJ_TAG: + tag_count++; + break; + case OBJ_COMMIT: + BUG("unexpected commit object in walken_show_object\n"); + default: + BUG("unexpected object type %s in walken_show_object\n", + type_name(obj->type)); + } +} +---- + +Again, `obj` is fairly self-explanatory, and we can guess that `buf` is the same +context pointer that `walken_show_commit()` receives: the `show_data` argument +to `traverse_commit_list()` and `traverse_commit_list_filtered()`. Finally, +`str` contains the name of the object, which ends up being something like +`foo.txt` (blob), `bar/baz` (tree), or `v1.2.3` (tag). + +To help assure us that we aren't double-counting commits, we'll include some +complaining if a commit object is routed through our non-commit callback; we'll +also complain if we see an invalid object type. Since those two cases should be +unreachable, and would only change in the event of a semantic change to the Git +codebase, we complain by using `BUG()` - which is a signal to a developer that +the change they made caused unintended consequences, and the rest of the +codebase needs to be updated to understand that change. `BUG()` is not intended +to be seen by the public, so it is not localized. + +Our main object walk implementation is substantially different from our commit +walk implementation, so let's make a new function to perform the object walk. We +can perform setup which is applicable to all objects here, too, to keep separate +from setup which is applicable to commit-only walks. + +We'll start by enabling all types of objects in the `struct rev_info`. We'll +also turn on `tree_blobs_in_commit_order`, which means that we will walk a +commit's tree and everything it points to immediately after we find each commit, +as opposed to waiting for the end and walking through all trees after the commit +history has been discovered. With the appropriate settings configured, we are +ready to call `prepare_revision_walk()`. + +---- +static void walken_object_walk(struct rev_info *rev) +{ + rev->tree_objects = 1; + rev->blob_objects = 1; + rev->tag_objects = 1; + rev->tree_blobs_in_commit_order = 1; + + if (prepare_revision_walk(rev)) + die(_("revision walk setup failed")); + + commit_count = 0; + tag_count = 0; + blob_count = 0; + tree_count = 0; +---- + +Let's start by calling just the unfiltered walk and reporting our counts. +Complete your implementation of `walken_object_walk()`: + +---- + traverse_commit_list(rev, walken_show_commit, walken_show_object, NULL); + + printf("commits %d\nblobs %d\ntags %d\ntrees %d\n", commit_count, + blob_count, tag_count, tree_count); +} +---- + +NOTE: This output is intended to be machine-parsed. Therefore, we are not +sending it to `trace_printf()`, and we are not localizing it - we need scripts +to be able to count on the formatting to be exactly the way it is shown here. +If we were intending this output to be read by humans, we would need to localize +it with `_()`. + +Finally, we'll ask `cmd_walken()` to use the object walk instead. Discussing +command line options is out of scope for this tutorial, so we'll just hardcode +a branch we can change at compile time. Where you call `final_rev_info_setup()` +and `walken_commit_walk()`, instead branch like so: + +---- + if (1) { + add_head_to_pending(&rev); + walken_object_walk(&rev); + } else { + final_rev_info_setup(argc, argv, prefix, &rev); + walken_commit_walk(&rev); + } +---- + +NOTE: For simplicity, we've avoided all the filters and sorts we applied in +`final_rev_info_setup()` and simply added `HEAD` to our pending queue. If you +want, you can certainly use the filters we added before by moving +`final_rev_info_setup()` out of the conditional and removing the call to +`add_head_to_pending()`. + +Now we can try to run our command! It should take noticeably longer than the +commit walk, but an examination of the output will give you an idea why. Your +output should look similar to this example, but with different counts: + +---- +Object walk completed. Found 55733 commits, 100274 blobs, 0 tags, and 104210 trees. +---- + +This makes sense. We have more trees than commits because the Git project has +lots of subdirectories which can change, plus at least one tree per commit. We +have no tags because we started on a commit (`HEAD`) and while tags can point to +commits, commits can't point to tags. + +NOTE: You will have different counts when you run this yourself! The number of +objects grows along with the Git project. + +=== Adding a Filter + +There are a handful of filters that we can apply to the object walk laid out in +`Documentation/rev-list-options.txt`. These filters are typically useful for +operations such as creating packfiles or performing a partial clone. They are +defined in `list-objects-filter-options.h`. For the purposes of this tutorial we +will use the "tree:1" filter, which causes the walk to omit all trees and blobs +which are not directly referenced by commits reachable from the commit in +`pending` when the walk begins. (`pending` is the list of objects which need to +be traversed during a walk; you can imagine a breadth-first tree traversal to +help understand. In our case, that means we omit trees and blobs not directly +referenced by `HEAD` or `HEAD`'s history, because we begin the walk with only +`HEAD` in the `pending` list.) + +First, we'll need to `#include "list-objects-filter-options.h`" and set up the +`struct list_objects_filter_options` at the top of the function. + +---- +static void walken_object_walk(struct rev_info *rev) +{ + struct list_objects_filter_options filter_options = {}; + + ... +---- + +For now, we are not going to track the omitted objects, so we'll replace those +parameters with `NULL`. For the sake of simplicity, we'll add a simple +build-time branch to use our filter or not. Replace the line calling +`traverse_commit_list()` with the following, which will remind us which kind of +walk we've just performed: + +---- + if (0) { + /* Unfiltered: */ + trace_printf(_("Unfiltered object walk.\n")); + traverse_commit_list(rev, walken_show_commit, + walken_show_object, NULL); + } else { + trace_printf( + _("Filtered object walk with filterspec 'tree:1'.\n")); + parse_list_objects_filter(&filter_options, "tree:1"); + + traverse_commit_list_filtered(&filter_options, rev, + walken_show_commit, walken_show_object, NULL, NULL); + } +---- + +`struct list_objects_filter_options` is usually built directly from a command +line argument, so the module provides an easy way to build one from a string. +Even though we aren't taking user input right now, we can still build one with +a hardcoded string using `parse_list_objects_filter()`. + +With the filter spec "tree:1", we are expecting to see _only_ the root tree for +each commit; therefore, the tree object count should be less than or equal to +the number of commits. (For an example of why that's true: `git commit --revert` +points to the same tree object as its grandparent.) + +=== Counting Omitted Objects + +We also have the capability to enumerate all objects which were omitted by a +filter, like with `git log --filter=<spec> --filter-print-omitted`. Asking +`traverse_commit_list_filtered()` to populate the `omitted` list means that our +object walk does not perform any better than an unfiltered object walk; all +reachable objects are walked in order to populate the list. + +First, add the `struct oidset` and related items we will use to iterate it: + +---- +static void walken_object_walk( + ... + + struct oidset omitted; + struct oidset_iter oit; + struct object_id *oid = NULL; + int omitted_count = 0; + oidset_init(&omitted, 0); + + ... +---- + +Modify the call to `traverse_commit_list_filtered()` to include your `omitted` +object: + +---- + ... + + traverse_commit_list_filtered(&filter_options, rev, + walken_show_commit, walken_show_object, NULL, &omitted); + + ... +---- + +Then, after your traversal, the `oidset` traversal is pretty straightforward. +Count all the objects within and modify the print statement: + +---- + /* Count the omitted objects. */ + oidset_iter_init(&omitted, &oit); + + while ((oid = oidset_iter_next(&oit))) + omitted_count++; + + printf("commits %d\nblobs %d\ntags %d\ntrees%d\nomitted %d\n", + commit_count, blob_count, tag_count, tree_count, omitted_count); +---- + +By running your walk with and without the filter, you should find that the total +object count in each case is identical. You can also time each invocation of +the `walken` subcommand, with and without `omitted` being passed in, to confirm +to yourself the runtime impact of tracking all omitted objects. + +=== Changing the Order + +Finally, let's demonstrate that you can also reorder walks of all objects, not +just walks of commits. First, we'll make our handlers chattier - modify +`walken_show_commit()` and `walken_show_object()` to print the object as they +go: + +---- +static void walken_show_commit(struct commit *cmt, void *buf) +{ + trace_printf("commit: %s\n", oid_to_hex(&cmt->object.oid)); + commit_count++; +} + +static void walken_show_object(struct object *obj, const char *str, void *buf) +{ + trace_printf("%s: %s\n", type_name(obj->type), oid_to_hex(&obj->oid)); + + ... +} +---- + +NOTE: Since we will be examining this output directly as humans, we'll use +`trace_printf()` here. Additionally, since this change introduces a significant +number of printed lines, using `trace_printf()` will allow us to easily silence +those lines without having to recompile. + +(Leave the counter increment logic in place.) + +With only that change, run again (but save yourself some scrollback): + +---- +$ GIT_TRACE=1 ./bin-wrappers/git walken | head -n 10 +---- + +Take a look at the top commit with `git show` and the object ID you printed; it +should be the same as the output of `git show HEAD`. + +Next, let's change a setting on our `struct rev_info` within +`walken_object_walk()`. Find where you're changing the other settings on `rev`, +such as `rev->tree_objects` and `rev->tree_blobs_in_commit_order`, and add the +`reverse` setting at the bottom: + +---- + ... + + rev->tree_objects = 1; + rev->blob_objects = 1; + rev->tag_objects = 1; + rev->tree_blobs_in_commit_order = 1; + rev->reverse = 1; + + ... +---- + +Now, run again, but this time, let's grab the last handful of objects instead +of the first handful: + +---- +$ make +$ GIT_TRACE=1 ./bin-wrappers git walken | tail -n 10 +---- + +The last commit object given should have the same OID as the one we saw at the +top before, and running `git show <oid>` with that OID should give you again +the same results as `git show HEAD`. Furthermore, if you run and examine the +first ten lines again (with `head` instead of `tail` like we did before applying +the `reverse` setting), you should see that now the first commit printed is the +initial commit, `e83c5163`. + +== Wrapping Up + +Let's review. In this tutorial, we: + +- Built a commit walk from the ground up +- Enabled a grep filter for that commit walk +- Changed the sort order of that filtered commit walk +- Built an object walk (tags, commits, trees, and blobs) from the ground up +- Learned how to add a filter-spec to an object walk +- Changed the display order of the filtered object walk diff --git a/Documentation/RelNotes/1.5.0.txt b/Documentation/RelNotes/1.5.0.txt index daf4bdb0d7..d6d42f3183 100644 --- a/Documentation/RelNotes/1.5.0.txt +++ b/Documentation/RelNotes/1.5.0.txt @@ -251,7 +251,7 @@ Updates in v1.5.0 since v1.4.4 series the repository when that happens. -* Crufts removal +* Cruft removal - We used to say "old commits are retrievable using reflog and 'master@{yesterday}' syntax as long as you haven't run @@ -379,7 +379,7 @@ Updates in v1.5.0 since v1.4.4 series - The value of i18n.commitencoding in the originating repository is recorded in the commit object on the "encoding" header, if it is not UTF-8. git-log and friends notice this, - and reencodes the message to the log output encoding when + and re-encodes the message to the log output encoding when displaying, if they are different. The log output encoding is determined by "git log --encoding=<encoding>", i18n.logoutputencoding configuration, or i18n.commitencoding diff --git a/Documentation/RelNotes/1.6.2.txt b/Documentation/RelNotes/1.6.2.txt index ad060f4f89..980adfb315 100644 --- a/Documentation/RelNotes/1.6.2.txt +++ b/Documentation/RelNotes/1.6.2.txt @@ -11,7 +11,7 @@ push running this release will issue a big warning when the configuration variable is missing. Please refer to: http://git.or.cz/gitwiki/GitFaq#non-bare - http://thread.gmane.org/gmane.comp.version-control.git/107758/focus=108007 + https://lore.kernel.org/git/7vbptlsuyv.fsf@gitster.siamese.dyndns.org/ for more details on the reason why this change is needed and the transition plan. diff --git a/Documentation/RelNotes/1.6.3.txt b/Documentation/RelNotes/1.6.3.txt index 418c685cf8..4bcff945e0 100644 --- a/Documentation/RelNotes/1.6.3.txt +++ b/Documentation/RelNotes/1.6.3.txt @@ -11,7 +11,7 @@ push running this release will issue a big warning when the configuration variable is missing. Please refer to: http://git.or.cz/gitwiki/GitFaq#non-bare - http://thread.gmane.org/gmane.comp.version-control.git/107758/focus=108007 + https://lore.kernel.org/git/7vbptlsuyv.fsf@gitster.siamese.dyndns.org/ for more details on the reason why this change is needed and the transition plan. diff --git a/Documentation/RelNotes/1.6.4.txt b/Documentation/RelNotes/1.6.4.txt index 7a904419f7..a2a34b43a7 100644 --- a/Documentation/RelNotes/1.6.4.txt +++ b/Documentation/RelNotes/1.6.4.txt @@ -11,7 +11,7 @@ push running this release will issue a big warning when the configuration variable is missing. Please refer to: http://git.or.cz/gitwiki/GitFaq#non-bare - http://thread.gmane.org/gmane.comp.version-control.git/107758/focus=108007 + https://lore.kernel.org/git/7vbptlsuyv.fsf@gitster.siamese.dyndns.org/ for more details on the reason why this change is needed and the transition plan. diff --git a/Documentation/RelNotes/1.6.5.4.txt b/Documentation/RelNotes/1.6.5.4.txt index d3a2a3e712..344333de66 100644 --- a/Documentation/RelNotes/1.6.5.4.txt +++ b/Documentation/RelNotes/1.6.5.4.txt @@ -10,7 +10,7 @@ Fixes since v1.6.5.3 * "git prune-packed" gave progress output even when its standard error is not connected to a terminal; this caused cron jobs that run it to - produce crufts. + produce cruft. * "git pack-objects --all-progress" is an option to ask progress output from write-object phase _if_ progress output were to be produced, and diff --git a/Documentation/RelNotes/1.6.5.txt b/Documentation/RelNotes/1.6.5.txt index ee141c19ad..6c7f7da7eb 100644 --- a/Documentation/RelNotes/1.6.5.txt +++ b/Documentation/RelNotes/1.6.5.txt @@ -22,7 +22,7 @@ push running this release will issue a big warning when the configuration variable is missing. Please refer to: http://git.or.cz/gitwiki/GitFaq#non-bare - http://thread.gmane.org/gmane.comp.version-control.git/107758/focus=108007 + https://lore.kernel.org/git/7vbptlsuyv.fsf@gitster.siamese.dyndns.org/ for more details on the reason why this change is needed and the transition plan. diff --git a/Documentation/RelNotes/1.6.6.txt b/Documentation/RelNotes/1.6.6.txt index c50b59c495..3ed1e01433 100644 --- a/Documentation/RelNotes/1.6.6.txt +++ b/Documentation/RelNotes/1.6.6.txt @@ -64,7 +64,7 @@ users will fare this time. Please refer to: http://git.or.cz/gitwiki/GitFaq#non-bare - http://thread.gmane.org/gmane.comp.version-control.git/107758/focus=108007 + https://lore.kernel.org/git/7vbptlsuyv.fsf@gitster.siamese.dyndns.org/ for more details on the reason why this change is needed and the transition process that already took place so far. diff --git a/Documentation/RelNotes/1.7.0.2.txt b/Documentation/RelNotes/1.7.0.2.txt index fcb46ca6a4..73ed2b5278 100644 --- a/Documentation/RelNotes/1.7.0.2.txt +++ b/Documentation/RelNotes/1.7.0.2.txt @@ -34,7 +34,7 @@ Fixes since v1.7.0.1 * "git status" in 1.7.0 lacked the optimization we used to have in 1.6.X series to speed up scanning of large working tree. - * "gitweb" did not diagnose parsing errors properly while reading tis configuration + * "gitweb" did not diagnose parsing errors properly while reading its configuration file. And other minor fixes and documentation updates. diff --git a/Documentation/RelNotes/1.7.10.4.txt b/Documentation/RelNotes/1.7.10.4.txt index 326670df6e..57597f2bf3 100644 --- a/Documentation/RelNotes/1.7.10.4.txt +++ b/Documentation/RelNotes/1.7.10.4.txt @@ -7,7 +7,7 @@ Fixes since v1.7.10.3 * The message file for Swedish translation has been updated a bit. * A name taken from mailmap was copied into an internal buffer - incorrectly and could overun the buffer if it is too long. + incorrectly and could overrun the buffer if it is too long. * A malformed commit object that has a header line chomped in the middle could kill git with a NULL pointer dereference. diff --git a/Documentation/RelNotes/1.7.12.3.txt b/Documentation/RelNotes/1.7.12.3.txt index ecda427a35..4b822976b8 100644 --- a/Documentation/RelNotes/1.7.12.3.txt +++ b/Documentation/RelNotes/1.7.12.3.txt @@ -25,7 +25,7 @@ Fixes since v1.7.12.2 its Accept-Encoding header. * "git receive-pack" (the counterpart to "git push") did not give - progress output while processing objects it received to the puser + progress output while processing objects it received to the user when run over the smart-http protocol. * "git status" honored the ignore=dirty settings in .gitmodules but diff --git a/Documentation/RelNotes/1.7.5.3.txt b/Documentation/RelNotes/1.7.5.3.txt index 9c03353af2..1d24edcf2f 100644 --- a/Documentation/RelNotes/1.7.5.3.txt +++ b/Documentation/RelNotes/1.7.5.3.txt @@ -22,7 +22,7 @@ Fixes since v1.7.5.2 * "git log --stdin path" with an input that has additional pathspec used to corrupt memory. - * "git send-pack" (hence "git push") over smalt-HTTP protocol could + * "git send-pack" (hence "git push") over smart-HTTP protocol could deadlock when the client side pack-object died early. * Compressed tarball gitweb generates used to be made with the timestamp diff --git a/Documentation/RelNotes/1.8.0.txt b/Documentation/RelNotes/1.8.0.txt index 43883c14f0..63d6e4afa4 100644 --- a/Documentation/RelNotes/1.8.0.txt +++ b/Documentation/RelNotes/1.8.0.txt @@ -233,7 +233,7 @@ to them for details). together, misdetected branches. * "git receive-pack" (the counterpart to "git push") did not give - progress output while processing objects it received to the puser + progress output while processing objects it received to the user when run over the smart-http protocol. * When you misspell the command name you give to the "exec" action in diff --git a/Documentation/RelNotes/1.8.4.1.txt b/Documentation/RelNotes/1.8.4.1.txt index 96090ef599..c257beb114 100644 --- a/Documentation/RelNotes/1.8.4.1.txt +++ b/Documentation/RelNotes/1.8.4.1.txt @@ -15,7 +15,7 @@ Fixes since v1.8.4 in 1.8.4-rc1). * "git rebase -i" and other scripted commands were feeding a - random, data dependant error message to 'echo' and expecting it + random, data dependent error message to 'echo' and expecting it to come out literally. * Setting the "submodule.<name>.path" variable to the empty diff --git a/Documentation/RelNotes/1.8.4.txt b/Documentation/RelNotes/1.8.4.txt index 02f681b710..255e185af6 100644 --- a/Documentation/RelNotes/1.8.4.txt +++ b/Documentation/RelNotes/1.8.4.txt @@ -58,7 +58,7 @@ Foreign interfaces, subsystems and ports. credential helper interface from Git.pm. * Update build for Cygwin 1.[57]. Torsten Bögershausen reports that - this is fine with Cygwin 1.7 ($gmane/225824) so let's try moving it + this is fine with Cygwin 1.7 (cf. <51A606A0.5060101@web.de>) so let's try moving it ahead. * The credential helper to talk to keychain on OS X (in contrib/) has diff --git a/Documentation/RelNotes/2.1.3.txt b/Documentation/RelNotes/2.1.3.txt index acc9ebb886..0dfb17c4fc 100644 --- a/Documentation/RelNotes/2.1.3.txt +++ b/Documentation/RelNotes/2.1.3.txt @@ -13,7 +13,7 @@ Git v2.1.3 Release Notes they are new enough to support the `--output` option. * "git pack-objects" forgot to disable the codepath to generate - object recheability bitmap when it needs to split the resulting + object reachability bitmap when it needs to split the resulting pack. * "gitweb" used deprecated CGI::startfrom, which was removed from diff --git a/Documentation/RelNotes/2.10.0.txt b/Documentation/RelNotes/2.10.0.txt index f4da28ab66..3792b7d03d 100644 --- a/Documentation/RelNotes/2.10.0.txt +++ b/Documentation/RelNotes/2.10.0.txt @@ -478,7 +478,7 @@ notes for details). * One part of "git am" had an oddball helper function that called stuff from outside "his" as opposed to calling what we have "ours", which was not gender-neutral and also inconsistent with the rest of - the system where outside stuff is usuall called "theirs" in + the system where outside stuff is usually called "theirs" in contrast to "ours". * "git blame file" allowed the lineage of lines in the uncommitted, diff --git a/Documentation/RelNotes/2.10.2.txt b/Documentation/RelNotes/2.10.2.txt index c4d4397023..abbd331508 100644 --- a/Documentation/RelNotes/2.10.2.txt +++ b/Documentation/RelNotes/2.10.2.txt @@ -86,7 +86,7 @@ Fixes since v2.10.1 by refusing to check out a branch that is already checked out in another worktree. However, this also prevented checking out a branch, which is designated as the primary branch of a bare - reopsitory, in a worktree that is connected to the bare + repository, in a worktree that is connected to the bare repository. The check has been corrected to allow it. * "git rebase" immediately after "git clone" failed to find the fork diff --git a/Documentation/RelNotes/2.11.1.txt b/Documentation/RelNotes/2.11.1.txt index 9cd14c8197..7d35cf186d 100644 --- a/Documentation/RelNotes/2.11.1.txt +++ b/Documentation/RelNotes/2.11.1.txt @@ -104,7 +104,7 @@ Fixes since v2.11 "git difftool --dir-diff" from a subdirectory never worked. This has been fixed. - * "git p4" that tracks multile p4 paths imported a single changelist + * "git p4" that tracks multiple p4 paths imported a single changelist that touches files in these multiple paths as one commit, followed by many empty commits. This has been fixed. diff --git a/Documentation/RelNotes/2.12.0.txt b/Documentation/RelNotes/2.12.0.txt index ef8b97da9b..d2f6a83614 100644 --- a/Documentation/RelNotes/2.12.0.txt +++ b/Documentation/RelNotes/2.12.0.txt @@ -315,7 +315,7 @@ notes for details). "git difftool --dir-diff" from a subdirectory never worked. This has been fixed. - * "git p4" that tracks multile p4 paths imported a single changelist + * "git p4" that tracks multiple p4 paths imported a single changelist that touches files in these multiple paths as one commit, followed by many empty commits. This has been fixed. diff --git a/Documentation/RelNotes/2.13.0.txt b/Documentation/RelNotes/2.13.0.txt index aa99d4b3ce..2a47b4cb0c 100644 --- a/Documentation/RelNotes/2.13.0.txt +++ b/Documentation/RelNotes/2.13.0.txt @@ -177,7 +177,7 @@ UI, Workflows & Features been changed to enable "--decorate". * The output from "git status --short" has been extended to show - various kinds of dirtyness in submodules differently; instead of to + various kinds of dirtiness in submodules differently; instead of to "M" for modified, 'm' and '?' can be shown to signal changes only to the working tree of the submodule but not the commit that is checked out. diff --git a/Documentation/RelNotes/2.13.3.txt b/Documentation/RelNotes/2.13.3.txt index 5d76ad5310..384e4de265 100644 --- a/Documentation/RelNotes/2.13.3.txt +++ b/Documentation/RelNotes/2.13.3.txt @@ -25,7 +25,7 @@ Fixes since v2.13.2 * The code to pick up and execute command alias definition from the configuration used to switch to the top of the working tree and then come back when the expanded alias was executed, which was - unnecessarilyl complex. Attempt to simplify the logic by using the + unnecessarily complex. Attempt to simplify the logic by using the early-config mechanism that does not chdir around. * "git add -p" were updated in 2.12 timeframe to cope with custom @@ -35,7 +35,7 @@ Fixes since v2.13.2 * Fix a recent regression to "git rebase -i" and add tests that would have caught it and others. - * An unaligned 32-bit access in pack-bitmap code ahs been corrected. + * An unaligned 32-bit access in pack-bitmap code has been corrected. * Tighten error checks for invalid "git apply" input. diff --git a/Documentation/RelNotes/2.14.0.txt b/Documentation/RelNotes/2.14.0.txt index 4246c68ff5..2711a2529d 100644 --- a/Documentation/RelNotes/2.14.0.txt +++ b/Documentation/RelNotes/2.14.0.txt @@ -141,7 +141,7 @@ Performance, Internal Implementation, Development Support etc. * Some platforms have ulong that is smaller than time_t, and our historical use of ulong for timestamp would mean they cannot represent some timestamp that the platform allows. Invent a - separate and dedicated timestamp_t (so that we can distingiuish + separate and dedicated timestamp_t (so that we can distinguish timestamps and a vanilla ulongs, which along is already a good move), and then declare uintmax_t is the type to be used as the timestamp_t. @@ -442,7 +442,7 @@ notes for details). * The code to pick up and execute command alias definition from the configuration used to switch to the top of the working tree and then come back when the expanded alias was executed, which was - unnecessarilyl complex. Attempt to simplify the logic by using the + unnecessarily complex. Attempt to simplify the logic by using the early-config mechanism that does not chdir around. * Fix configuration codepath to pay proper attention to commondir diff --git a/Documentation/RelNotes/2.16.0.txt b/Documentation/RelNotes/2.16.0.txt index 0c81c5915f..b474781ed8 100644 --- a/Documentation/RelNotes/2.16.0.txt +++ b/Documentation/RelNotes/2.16.0.txt @@ -407,7 +407,7 @@ Fixes since v2.15 (merge eef3df5a93 bw/pathspec-match-submodule-boundary later to maint). * Amending commits in git-gui broke the author name that is non-ascii - due to incorrect enconding conversion. + due to incorrect encoding conversion. * Recent update to the submodule configuration code broke "diff-tree" by accidentally stopping to read from the index upfront. diff --git a/Documentation/RelNotes/2.16.3.txt b/Documentation/RelNotes/2.16.3.txt index 64a0bcb0d2..f0121a8f2d 100644 --- a/Documentation/RelNotes/2.16.3.txt +++ b/Documentation/RelNotes/2.16.3.txt @@ -24,7 +24,7 @@ Fixes since v2.16.2 * The http tracing code, often used to debug connection issues, learned to redact potentially sensitive information from its output - so that it can be more safely sharable. + so that it can be more safely shareable. * Crash fix for a corner case where an error codepath tried to unlock what it did not acquire lock on. diff --git a/Documentation/RelNotes/2.17.0.txt b/Documentation/RelNotes/2.17.0.txt index c2cf891f71..8b17c26033 100644 --- a/Documentation/RelNotes/2.17.0.txt +++ b/Documentation/RelNotes/2.17.0.txt @@ -216,7 +216,7 @@ Fixes since v2.16 * The http tracing code, often used to debug connection issues, learned to redact potentially sensitive information from its output - so that it can be more safely sharable. + so that it can be more safely shareable. (merge 8ba18e6fa4 jt/http-redact-cookies later to maint). * Crash fix for a corner case where an error codepath tried to unlock diff --git a/Documentation/RelNotes/2.18.0.txt b/Documentation/RelNotes/2.18.0.txt index 3ea280cf68..6c8a0e97c1 100644 --- a/Documentation/RelNotes/2.18.0.txt +++ b/Documentation/RelNotes/2.18.0.txt @@ -179,7 +179,7 @@ Performance, Internal Implementation, Development Support etc. (merge 00a3da2a13 nd/remove-ignore-env-field later to maint). * Code to find the length to uniquely abbreviate object names based - on packfile content, which is a relatively recent addtion, has been + on packfile content, which is a relatively recent addition, has been optimized to use the same fan-out table. * The mechanism to use parse-options API to automate the command line diff --git a/Documentation/RelNotes/2.19.0.txt b/Documentation/RelNotes/2.19.0.txt index a06ccf6e2a..891c79b9cb 100644 --- a/Documentation/RelNotes/2.19.0.txt +++ b/Documentation/RelNotes/2.19.0.txt @@ -106,7 +106,7 @@ Performance, Internal Implementation, Development Support etc. * The conversion to pass "the_repository" and then "a_repository" throughout the object access API continues. - * Continuing with the idea to programatically enumerate various + * Continuing with the idea to programmatically enumerate various pieces of data required for command line completion, teach the codebase to report the list of configuration variables subcommands care about to help complete them. diff --git a/Documentation/RelNotes/2.20.0.txt b/Documentation/RelNotes/2.20.0.txt index e71fe3dee1..3dd7e6e1fc 100644 --- a/Documentation/RelNotes/2.20.0.txt +++ b/Documentation/RelNotes/2.20.0.txt @@ -119,7 +119,7 @@ UI, Workflows & Features alias expansion. * The documentation of "git gc" has been updated to mention that it - is no longer limited to "pruning away crufts" but also updates + is no longer limited to "pruning away cruft" but also updates ancillary files like commit-graph as a part of repository optimization. diff --git a/Documentation/RelNotes/2.25.0.txt b/Documentation/RelNotes/2.25.0.txt new file mode 100644 index 0000000000..8956061c72 --- /dev/null +++ b/Documentation/RelNotes/2.25.0.txt @@ -0,0 +1,340 @@ +Git 2.25 Release Notes +====================== + +Updates since v2.24 +------------------- + +Backward compatibility notes + + +UI, Workflows & Features + + * A tutorial on object enumeration has been added. + + * The branch description ("git branch --edit-description") has been + used to fill the body of the cover letters by the format-patch + command; this has been enhanced so that the subject can also be + filled. + + * "git rebase --preserve-merges" has been marked as deprecated; this + release stops advertising it in the "git rebase -h" output. + + * The code to generate multi-pack index learned to show (or not to + show) progress indicators. + + * "git apply --3way" learned to honor merge.conflictStyle + configuration variable, like merges would. + + * The custom format for "git log --format=<format>" learned the l/L + placeholder that is similar to e/E that fills in the e-mail + address, but only the local part on the left side of '@'. + + * Documentation pages for "git shortlog" now list commit limiting + options explicitly. + + * The patterns to detect function boundary for Elixir language has + been added. + + * The completion script (in contrib/) learned that the "--onto" + option of "git rebase" can take its argument as the value of the + option. + + * The userdiff machinery has been taught that "async def" is another + way to begin a "function" in Python. + + * "git range-diff" learned to take the "--notes=<ref>" and the + "--no-notes" options to control the commit notes included in the + log message that gets compared. + + * "git rev-parse --show-toplevel" run outside of any working tree did + not error out, which has been corrected. + + * A few commands learned to take the pathspec from the standard input + or a named file, instead of taking it as the command line + arguments, with the "--pathspec-from-file" option. + + * "git rebase -i" learned a few options that are known by "git + rebase" proper. + + * "git submodule" learned a subcommand "set-url". + + * "git log" family learned "--pretty=reference" that gives the name + of a commit in the format that is often used to refer to it in log + messages. + + * The interaction between "git clone --recurse-submodules" and + alternate object store was ill-designed. The documentation and + code have been taught to make more clear recommendations when the + users see failures. + + * Management of sparsely checked-out working tree has gained a + dedicated "sparse-checkout" command. + + +Performance, Internal Implementation, Development Support etc. + + * Debugging support for lazy cloning has been a bit improved. + + * Move the definition of a set of bitmask constants from 0ctal + literal to (1U<<count) notation. + + * Test updates to prepare for SHA-2 transition continues. + + * Crufty code and logic accumulated over time around the object + parsing and low-level object access used in "git fsck" have been + cleaned up. + + * The implementation of "git log --graph" got refactored and then its + output got simplified. + + * Follow recent push to move API docs from Documentation/ to header + files and update config.h + + * "git bundle" has been taught to use the parse options API. "git + bundle verify" learned "--quiet" and "git bundle create" learned + options to control the progress output. + + * Handling of commit objects that use non UTF-8 encoding during + "rebase -i" has been improved. + + * The beginning of rewriting "git add -i" in C. + + * A label used in the todo list that are generated by "git rebase + --rebase-merges" is used as a part of a refname; the logic to come + up with the label has been tightened to avoid names that cannot be + used as such. + + * The logic to avoid duplicate label names generated by "git rebase + --rebase-merges" forgot that the machinery itself uses "onto" as a + label name, which must be avoided by auto-generated labels, which + has been corrected. + + * We have had compatibility fallback macro definitions for "PRIuMAX", + "PRIu32", etc. but did not for "PRIdMAX", while the code used the + last one apparently without any hiccup reported recently. The + fallback macro definitions for these <inttypes.h> macros that must + appear in C99 systems have been removed. + + * Recently we have declared that GIT_TEST_* variables take the + usual boolean values (it used to be that some used "non-empty + means true" and taking GIT_TEST_VAR=YesPlease as true); make + sure we notice and fail when non-bool strings are given to + these variables. + + * Users of oneway_merge() (like "reset --hard") learned to take + advantage of fsmonitor to avoid unnecessary lstat(2) calls. + + * Performance tweak on "git push" into a repository with many refs + that point at objects we have never heard of. + + * PerfTest fix to avoid stale result mixed up with the latest round + of test results. + + * Hide lower-level verify_signed-buffer() API as a pure helper to + implement the public check_signature() function, in order to + encourage new callers to use the correct and more strict + validation. + + * Unnecessary reading of state variables back from the disk during + sequencer operation has been reduced. + + * The code has been made to avoid gmtime() and localtime() and prefer + their reentrant counterparts. + + * The effort to reimplement "git add -i" in C continues. + + * In a repository with many packfiles, the cost of the procedure that + avoids registering the same packfile twice was unnecessarily high + by using an inefficient search algorithm, which has been corrected. + + * Redo "git name-rev" to avoid recursive calls. + + +Fixes since v2.24 +----------------- + + * "rebase -i" ceased to run post-commit hook by mistake in an earlier + update, which has been corrected. + + * "git notes copy $original" ought to copy the notes attached to the + original object to HEAD, but a mistaken tightening to command line + parameter validation made earlier disabled that feature by mistake. + + * When all files from some subdirectory were renamed to the root + directory, the directory rename heuristics would fail to detect that + as a rename/merge of the subdirectory to the root directory, which has + been corrected. + + * Code clean-up and a bugfix in the logic used to tell worktree local + and repository global refs apart. + (merge f45f88b2e4 sg/dir-trie-fixes later to maint). + + * "git stash save" in a working tree that is sparsely checked out + mistakenly removed paths that are outside the area of interest. + (merge 4a58c3d7f7 js/update-index-ignore-removal-for-skip-worktree later to maint). + + * "git rev-parse --git-path HEAD.lock" did not give the right path + when run in a secondary worktree. + (merge 76a53d640f js/git-path-head-dot-lock-fix later to maint). + + * "git merge --no-commit" needs "--no-ff" if you do not want to move + HEAD, which has been corrected in the manual page for "git bisect". + (merge 8dd327b246 ma/bisect-doc-sample-update later to maint). + + * "git worktree add" internally calls "reset --hard" that should not + descend into submodules, even when submodule.recurse configuration + is set, but it was affected. This has been corrected. + (merge 4782cf2ab6 pb/no-recursive-reset-hard-in-worktree-add later to maint). + + * Messages from die() etc. can be mixed up from multiple processes + without even line buffering on Windows, which has been worked + around. + (merge 116d1fa6c6 js/vreportf-wo-buffering later to maint). + + * HTTP transport had possible allocator/deallocator mismatch, which + has been corrected. + + * The watchman integration for fsmonitor was racy, which has been + corrected to be more conservative. + (merge dd0b61f577 kw/fsmonitor-watchman-fix later to maint). + + * Fetching from multiple remotes into the same repository in parallel + had a bad interaction with the recent change to (optionally) update + the commit-graph after a fetch job finishes, as these parallel + fetches compete with each other. Which has been corrected. + + * Recent update to "git stash pop" made the command empty the index + when run with the "--quiet" option, which has been corrected. + + * "git fetch" codepath had a big "do not lazily fetch missing objects + when I ask if something exists" switch. This has been corrected by + marking the "does this thing exist?" calls with "if not please do not + lazily fetch it" flag. + + * Test update to avoid wasted cycles. + (merge e0316695ec sg/skip-skipped-prereq later to maint). + + * Error handling after "git push" finishes sending the packdata and + waits for the response to the remote side has been improved. + (merge ad7a403268 jk/send-pack-remote-failure later to maint). + + * Some codepaths in "gitweb" that forgot to escape URLs generated + based on end-user input have been corrected. + (merge a376e37b2c jk/gitweb-anti-xss later to maint). + + * CI jobs for macOS has been made less chatty when updating perforce + package used during testing. + (merge 0dbc4a0edf jc/azure-ci-osx-fix-fix later to maint). + + * "git unpack-objects" used to show progress based only on the number + of received and unpacked objects, which stalled when it has to + handle an unusually large object. It now shows the throughput as + well. + (merge bae60ba7e9 sg/unpack-progress-throughput later to maint). + + * The sequencer machinery compared the HEAD and the state it is + attempting to commit to decide if the result would be a no-op + commit, even when amending a commit, which was incorrect, and + has been corrected. + + * The code to parse GPG output used to assume incorrectly that the + finterprint for the primary key would always be present for a valid + signature, which has been corrected. + (merge 67a6ea6300 hi/gpg-optional-pkfp-fix later to maint). + + * "git submodule status" and "git submodule status --cached" show + different things, but the documentation did not cover them + correctly, which has been corrected. + (merge 8d483c8408 mg/doc-submodule-status-cached later to maint). + + * "git reset --patch $object" without any pathspec should allow a + tree object to be given, but incorrectly required a committish, + which has been corrected. + + * "git submodule status" that is run from a subdirectory of the + superproject did not work well, which has been corrected. + (merge 1f3aea22c7 mg/submodule-status-from-a-subdirectory later to maint). + + * The revision walking machinery uses resources like per-object flag + bits that need to be reset before a new iteration of walking + begins, but the resources related to topological walk were not + cleared correctly, which has been corrected. + (merge 0aa0c2b2ec mh/clear-topo-walk-upon-reset later to maint). + + * TravisCI update. + (merge 176441bfb5 sg/osx-force-gcc-9 later to maint). + + * While running "revert" or "cherry-pick --edit" for multiple + commits, a recent regression incorrectly detected "nothing to + commit, working tree clean", instead of replaying the commits, + which has been corrected. + (merge befd4f6a81 sg/assume-no-todo-update-in-cherry-pick later to maint). + + * Work around a issue where a FD that is left open when spawning a + child process and is kept open in the child can interfere with the + operation in the parent process on Windows. + + * One kind of progress messages were always given during commit-graph + generation, instead of following the "if it takes more than two + seconds, show progress" pattern, which has been corrected. + + * "git rebase" did not work well when format.useAutoBase + configuration variable is set, which has been corrected. + + * The "diff" machinery learned not to lose added/removed blank lines + in the context when --ignore-blank-lines and --function-context are + used at the same time. + (merge 0bb313a552 rs/xdiff-ignore-ws-w-func-context later to maint). + + * The test on "fast-import" used to get stuck when "fast-import" died + in the middle. + (merge 0d9b0d7885 sg/t9300-robustify later to maint). + + * "git format-patch" can take a set of configured format.notes values + to specify which notes refs to use in the log message part of the + output. The behaviour of this was not consistent with multiple + --notes command line options, which has been corrected. + (merge e0f9095aaa dl/format-patch-notes-config-fixup later to maint). + + * "git p4" used to ignore lfs.storage configuration variable, which + has been corrected. + (merge ea94b16fb8 rb/p4-lfs later to maint). + + * Assorted fixes to the directory traversal API. + (merge 6836d2fe06 en/fill-directory-fixes later to maint). + + * Other code cleanup, docfix, build fix, etc. + (merge 80736d7c5e jc/am-show-current-patch-docfix later to maint). + (merge 8b656572ca sg/commit-graph-usage-fix later to maint). + (merge 6c02042139 mr/clone-dir-exists-to-path-exists later to maint). + (merge 44ae131e38 sg/blame-indent-heuristics-is-now-the-default later to maint). + (merge 0115e5d929 dl/doc-diff-no-index-implies-exit-code later to maint). + (merge 270de6acbe en/t6024-style later to maint). + (merge 14c4776d75 ns/test-desc-typofix later to maint). + (merge 68d40f30c4 dj/typofix-merge-strat later to maint). + (merge f66e0401ab jk/optim-in-pack-idx-conversion later to maint). + (merge 169bed7421 rs/parse-options-dup-null-fix later to maint). + (merge 51bd6be32d rs/use-copy-array-in-mingw-shell-command-preparation later to maint). + (merge b018719927 ma/t7004 later to maint). + (merge 932757b0cc ar/install-doc-update-cmds-needing-the-shell later to maint). + (merge 46efd28be1 ep/guard-kset-tar-headers later to maint). + (merge 9e5afdf997 ec/fetch-mark-common-refs-trace2 later to maint). + (merge f0e58b3fe8 pb/submodule-update-fetches later to maint). + (merge 2a02262078 dl/t5520-cleanup later to maint). + (merge a4fb016ba1 js/pkt-line-h-typofix later to maint). + (merge 54a7a64613 rs/simplify-prepare-cmd later to maint). + (merge 3eae30e464 jk/lore-is-the-archive later to maint). + (merge 14b7664df8 dl/lore-is-the-archive later to maint). + (merge 0e40a73a4c po/bundle-doc-clonable later to maint). + (merge e714b898c6 as/t7812-missing-redirects-fix later to maint). + (merge 528d9e6d01 jk/perf-wo-git-dot-pm later to maint). + (merge fc42f20e24 sg/test-squelch-noise-in-commit-bulk later to maint). + (merge c64368e3a2 bc/t9001-zsh-in-posix-emulation-mode later to maint). + (merge 11de8dd7ef dr/branch-usage-casefix later to maint). + (merge e05e8cf074 rs/archive-zip-code-cleanup later to maint). + (merge 147ee35558 rs/commit-export-env-simplify later to maint). + (merge 4507ecc771 rs/patch-id-use-oid-to-hex later to maint). + (merge 51a0a4ed95 mr/bisect-use-after-free later to maint). + (merge cc2bd5c45d pb/submodule-doc-xref later to maint). + (merge df5be01669 ja/doc-markup-cleanup later to maint). + (merge 7c5cea7242 mr/bisect-save-pointer-to-const-string later to maint). diff --git a/Documentation/RelNotes/2.3.3.txt b/Documentation/RelNotes/2.3.3.txt index 5ef12644c2..850dc68ede 100644 --- a/Documentation/RelNotes/2.3.3.txt +++ b/Documentation/RelNotes/2.3.3.txt @@ -12,7 +12,7 @@ Fixes since v2.3.2 * Description given by "grep -h" for its --exclude-standard option was phrased poorly. - * Documentaton for "git remote add" mentioned "--tags" and + * Documentation for "git remote add" mentioned "--tags" and "--no-tags" and it was not clear that fetch from the remote in the future will use the default behaviour when neither is given to override it. diff --git a/Documentation/RelNotes/2.3.7.txt b/Documentation/RelNotes/2.3.7.txt index fc95812cb3..5769184081 100644 --- a/Documentation/RelNotes/2.3.7.txt +++ b/Documentation/RelNotes/2.3.7.txt @@ -4,7 +4,7 @@ Git v2.3.7 Release Notes Fixes since v2.3.6 ------------------ - * An earlier update to the parser that disects a URL broke an + * An earlier update to the parser that dissects a URL broke an address, followed by a colon, followed by an empty string (instead of the port number), e.g. ssh://example.com:/path/to/repo. diff --git a/Documentation/RelNotes/2.4.3.txt b/Documentation/RelNotes/2.4.3.txt index 914d2c1860..422e930aa2 100644 --- a/Documentation/RelNotes/2.4.3.txt +++ b/Documentation/RelNotes/2.4.3.txt @@ -66,7 +66,7 @@ Fixes since v2.4.3 * Some time ago, "git blame" (incorrectly) lost the convert_to_git() call when synthesizing a fake "tip" commit that represents the state in the working tree, which broke folks who record the history - with LF line ending to make their project portabile across + with LF line ending to make their project portable across platforms while terminating lines in their working tree files with CRLF for their platform. diff --git a/Documentation/RelNotes/2.5.0.txt b/Documentation/RelNotes/2.5.0.txt index 87044504c5..84723f912a 100644 --- a/Documentation/RelNotes/2.5.0.txt +++ b/Documentation/RelNotes/2.5.0.txt @@ -172,7 +172,8 @@ Performance, Internal Implementation, Development Support etc. incorrect patch text to "git apply". Add tests to demonstrate this. - I have a slight suspicion that this may be $gmane/87202 coming back + I have a slight suspicion that this may be + cf. <7vtzf77wjp.fsf@gitster.siamese.dyndns.org> coming back and biting us (I seem to have said "let's run with this and see what happens" back then). diff --git a/Documentation/RelNotes/2.7.0.txt b/Documentation/RelNotes/2.7.0.txt index 563dadc57e..e3cbf3a73c 100644 --- a/Documentation/RelNotes/2.7.0.txt +++ b/Documentation/RelNotes/2.7.0.txt @@ -40,7 +40,7 @@ UI, Workflows & Features * "git interpret-trailers" can now run outside of a Git repository. - * "git p4" learned to reencode the pathname it uses to communicate + * "git p4" learned to re-encode the pathname it uses to communicate with the p4 depot with a new option. * Give progress meter to "git filter-branch". diff --git a/Documentation/RelNotes/2.7.3.txt b/Documentation/RelNotes/2.7.3.txt index 6adf038915..f618d71efd 100644 --- a/Documentation/RelNotes/2.7.3.txt +++ b/Documentation/RelNotes/2.7.3.txt @@ -20,7 +20,7 @@ Fixes since v2.7.2 tests. * "git show 'HEAD:Foo[BAR]Baz'" did not interpret the argument as a - rev, i.e. the object named by the the pathname with wildcard + rev, i.e. the object named by the pathname with wildcard characters in a tree object. * "git rev-parse --git-common-dir" used in the worktree feature diff --git a/Documentation/RelNotes/2.8.0.txt b/Documentation/RelNotes/2.8.0.txt index 5fbe1b86ee..27320b6a9f 100644 --- a/Documentation/RelNotes/2.8.0.txt +++ b/Documentation/RelNotes/2.8.0.txt @@ -189,7 +189,7 @@ Performance, Internal Implementation, Development Support etc. * Some calls to strcpy(3) triggers a false warning from static analyzers that are less intelligent than humans, and reducing the number of these false hits helps us notice real issues. A few - calls to strcpy(3) in a couple of protrams that are already safe + calls to strcpy(3) in a couple of programs that are already safe has been rewritten to avoid false warnings. * The "name_path" API was an attempt to reduce the need to construct diff --git a/Documentation/RelNotes/2.8.3.txt b/Documentation/RelNotes/2.8.3.txt index fedd9968e5..a63825ed87 100644 --- a/Documentation/RelNotes/2.8.3.txt +++ b/Documentation/RelNotes/2.8.3.txt @@ -55,8 +55,8 @@ Fixes since v2.8.2 This is necessary to use Git on Windows shared directories, and is already enabled for the MinGW and plain Windows builds. It also has been used in Cygwin packaged versions of Git for quite a while. - See http://thread.gmane.org/gmane.comp.version-control.git/291853 - and http://thread.gmane.org/gmane.comp.version-control.git/275680. + See https://lore.kernel.org/git/20160419091055.GF2345@dinwoodie.org/ + and https://lore.kernel.org/git/20150811100527.GW14466@dinwoodie.org/. * "git replace -e" did not honour "core.editor" configuration. diff --git a/Documentation/RelNotes/2.9.0.txt b/Documentation/RelNotes/2.9.0.txt index b61d36712f..991640119a 100644 --- a/Documentation/RelNotes/2.9.0.txt +++ b/Documentation/RelNotes/2.9.0.txt @@ -368,7 +368,7 @@ notes for details). This is necessary to use Git on Windows shared directories, and is already enabled for the MinGW and plain Windows builds. It also has been used in Cygwin packaged versions of Git for quite a while. - See http://thread.gmane.org/gmane.comp.version-control.git/291853 + See https://lore.kernel.org/git/20160419091055.GF2345@dinwoodie.org/ * "merge-octopus" strategy did not ensure that the index is clean when merge begins. diff --git a/Documentation/RelNotes/2.9.3.txt b/Documentation/RelNotes/2.9.3.txt index 695b86f612..305e08062b 100644 --- a/Documentation/RelNotes/2.9.3.txt +++ b/Documentation/RelNotes/2.9.3.txt @@ -36,7 +36,7 @@ Fixes since v2.9.2 * One part of "git am" had an oddball helper function that called stuff from outside "his" as opposed to calling what we have "ours", which was not gender-neutral and also inconsistent with the rest of - the system where outside stuff is usuall called "theirs" in + the system where outside stuff is usually called "theirs" in contrast to "ours". * The test framework learned a new helper test_match_signal to diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches index 1a60cc1329..4515cab519 100644 --- a/Documentation/SubmittingPatches +++ b/Documentation/SubmittingPatches @@ -142,19 +142,25 @@ archive, summarize the relevant points of the discussion. [[commit-reference]] If you want to reference a previous commit in the history of a stable -branch, use the format "abbreviated sha1 (subject, date)", -with the subject enclosed in a pair of double-quotes, like this: +branch, use the format "abbreviated hash (subject, date)", like this: .... - Commit f86a374 ("pack-bitmap.c: fix a memleak", 2015-03-30) + Commit f86a374 (pack-bitmap.c: fix a memleak, 2015-03-30) noticed that ... .... The "Copy commit summary" command of gitk can be used to obtain this -format, or this invocation of `git show`: +format (with the subject enclosed in a pair of double-quotes), or this +invocation of `git show`: .... - git show -s --date=short --pretty='format:%h ("%s", %ad)' <commit> + git show -s --pretty=reference <commit> +.... + +or, on an older version of Git without support for --pretty=reference: + +.... + git show -s --date=short --pretty='format:%h (%s, %ad)' <commit> .... [[git-tools]] diff --git a/Documentation/config.txt b/Documentation/config.txt index f50f1b4128..83e7bba872 100644 --- a/Documentation/config.txt +++ b/Documentation/config.txt @@ -142,7 +142,7 @@ refer to linkgit:gitignore[5] for details. For convenience: `gitdir/i`:: This is the same as `gitdir` except that matching is done - case-insensitively (e.g. on case-insensitive file sytems) + case-insensitively (e.g. on case-insensitive file systems) `onbranch`:: The data that follows the keyword `onbranch:` is taken to be a diff --git a/Documentation/config/add.txt b/Documentation/config/add.txt index 4d753f006e..c9f748f81c 100644 --- a/Documentation/config/add.txt +++ b/Documentation/config/add.txt @@ -5,3 +5,8 @@ add.ignore-errors (deprecated):: option of linkgit:git-add[1]. `add.ignore-errors` is deprecated, as it does not follow the usual naming convention for configuration variables. + +add.interactive.useBuiltin:: + [EXPERIMENTAL] Set to `true` to use the experimental built-in + implementation of the interactive version of linkgit:git-add[1] + instead of the Perl script version. Is `false` by default. diff --git a/Documentation/config/advice.txt b/Documentation/config/advice.txt index 6aaa360202..d4e698cd3f 100644 --- a/Documentation/config/advice.txt +++ b/Documentation/config/advice.txt @@ -107,4 +107,7 @@ advice.*:: editor input from the user. nestedTag:: Advice shown if a user attempts to recursively tag a tag object. + submoduleAlternateErrorStrategyDie: + Advice shown when a submodule.alternateErrorStrategy option + configured to "die" causes a fatal error. -- diff --git a/Documentation/config/core.txt b/Documentation/config/core.txt index 852d2ba37a..9e440b160d 100644 --- a/Documentation/config/core.txt +++ b/Documentation/config/core.txt @@ -559,6 +559,12 @@ core.unsetenvvars:: Defaults to `PERL5LIB` to account for the fact that Git for Windows insists on using its own Perl interpreter. +core.restrictinheritedhandles:: + Windows-only: override whether spawned processes inherit only standard + file handles (`stdin`, `stdout` and `stderr`) or all handles. Can be + `auto`, `true` or `false`. Defaults to `auto`, which means `true` on + Windows 7 and later, and `false` on older Windows versions. + core.createObject:: You can set this to 'link', in which case a hardlink followed by a delete of the source are used to make sure that object creation @@ -593,8 +599,14 @@ core.multiPackIndex:: multi-pack-index design document]. core.sparseCheckout:: - Enable "sparse checkout" feature. See section "Sparse checkout" in - linkgit:git-read-tree[1] for more information. + Enable "sparse checkout" feature. See linkgit:git-sparse-checkout[1] + for more information. + +core.sparseCheckoutCone:: + Enables the "cone mode" of the sparse checkout feature. When the + sparse-checkout file contains a limited set of patterns, then this + mode provides significant performance advantages. See + linkgit:git-sparse-checkout[1] for more information. core.abbrev:: Set the length object names are abbreviated to. If diff --git a/Documentation/config/format.txt b/Documentation/config/format.txt index 40cad9278f..45c7bd5a8f 100644 --- a/Documentation/config/format.txt +++ b/Documentation/config/format.txt @@ -36,6 +36,12 @@ format.subjectPrefix:: The default for format-patch is to output files with the '[PATCH]' subject prefix. Use this variable to change that prefix. +format.coverFromDescription:: + The default mode for format-patch to determine which parts of + the cover letter will be populated using the branch's + description. See the `--cover-from-description` option in + linkgit:git-format-patch[1]. + format.signature:: The default for format-patch is to output a signature containing the Git version number. Use this variable to change that default. @@ -100,4 +106,20 @@ If one wishes to use the ref `ref/notes/true`, please use that literal instead. + This configuration can be specified multiple times in order to allow -multiple notes refs to be included. +multiple notes refs to be included. In that case, it will behave +similarly to multiple `--[no-]notes[=]` options passed in. That is, a +value of `true` will show the default notes, a value of `<ref>` will +also show notes from that notes ref and a value of `false` will negate +previous configurations and not show notes. ++ +For example, ++ +------------ +[format] + notes = true + notes = foo + notes = false + notes = bar +------------ ++ +will only show notes from `refs/notes/bar`. diff --git a/Documentation/config/submodule.txt b/Documentation/config/submodule.txt index 0a1293b051..b33177151c 100644 --- a/Documentation/config/submodule.txt +++ b/Documentation/config/submodule.txt @@ -79,4 +79,6 @@ submodule.alternateLocation:: submodule.alternateErrorStrategy:: Specifies how to treat errors with the alternates for a submodule as computed via `submodule.alternateLocation`. Possible values are - `ignore`, `info`, `die`. Default is `die`. + `ignore`, `info`, `die`. Default is `die`. Note that if set to `ignore` + or `info`, and if there is an error with the computed alternate, the + clone proceeds as if no alternate was specified. diff --git a/Documentation/config/tag.txt b/Documentation/config/tag.txt index ef5adb3f42..6d9110d84c 100644 --- a/Documentation/config/tag.txt +++ b/Documentation/config/tag.txt @@ -13,7 +13,7 @@ tag.gpgSign:: Use of this option when running in an automated script can result in a large number of tags being signed. It is therefore convenient to use an agent to avoid typing your gpg passphrase - several times. Note that this option doesn't affects tag signing + several times. Note that this option doesn't affect tag signing behavior enabled by "-u <keyid>" or "--local-user=<keyid>" options. tar.umask:: diff --git a/Documentation/diff-format.txt b/Documentation/diff-format.txt index 4d846d7346..fbbd410a84 100644 --- a/Documentation/diff-format.txt +++ b/Documentation/diff-format.txt @@ -61,7 +61,7 @@ Possible status letters are: - R: renaming of a file - T: change in the type of the file - U: file is unmerged (you must complete the merge before it can -be committed) + be committed) - X: "unknown" change type (most probably a bug, please report it) Status letters C and R are always followed by a score (denoting the diff --git a/Documentation/fetch-options.txt b/Documentation/fetch-options.txt index 43b9ff3bce..a2f78624a2 100644 --- a/Documentation/fetch-options.txt +++ b/Documentation/fetch-options.txt @@ -92,6 +92,10 @@ ifndef::git-pull[] Run `git gc --auto` at the end to perform garbage collection if needed. This is enabled by default. +--[no-]write-commit-graph:: + Write a commit-graph after fetching. This overrides the config + setting `fetch.writeCommitGraph`. + -p:: --prune:: Before fetching, remove any remote-tracking references that no diff --git a/Documentation/git-add.txt b/Documentation/git-add.txt index 8b0e4c7fa8..be5e3ac54b 100644 --- a/Documentation/git-add.txt +++ b/Documentation/git-add.txt @@ -11,7 +11,8 @@ SYNOPSIS 'git add' [--verbose | -v] [--dry-run | -n] [--force | -f] [--interactive | -i] [--patch | -p] [--edit | -e] [--[no-]all | --[no-]ignore-removal | [--update | -u]] [--intent-to-add | -N] [--refresh] [--ignore-errors] [--ignore-missing] [--renormalize] - [--chmod=(+|-)x] [--] [<pathspec>...] + [--chmod=(+|-)x] [--pathspec-from-file=<file> [--pathspec-file-nul]] + [--] [<pathspec>...] DESCRIPTION ----------- @@ -187,6 +188,19 @@ for "git add --no-all <pathspec>...", i.e. ignored removed files. bit is only changed in the index, the files on disk are left unchanged. +--pathspec-from-file=<file>:: + Pathspec is passed in `<file>` instead of commandline args. If + `<file>` is exactly `-` then standard input is used. Pathspec + elements are separated by LF or CR/LF. Pathspec elements can be + quoted as explained for the configuration variable `core.quotePath` + (see linkgit:git-config[1]). See also `--pathspec-file-nul` and + global `--literal-pathspecs`. + +--pathspec-file-nul:: + Only meaningful with `--pathspec-from-file`. Pathspec elements are + separated with NUL character and all other characters are taken + literally (including newlines and quotes). + \--:: This option can be used to separate command-line options from the list of files, (useful when filenames might be mistaken diff --git a/Documentation/git-am.txt b/Documentation/git-am.txt index fc3b993c33..fc5750b3b8 100644 --- a/Documentation/git-am.txt +++ b/Documentation/git-am.txt @@ -177,7 +177,7 @@ default. You can use `--no-utf8` to override this. untouched. --show-current-patch:: - Show the patch being applied when "git am" is stopped because + Show the entire e-mail message "git am" has stopped at, because of conflicts. DISCUSSION diff --git a/Documentation/git-bisect-lk2009.txt b/Documentation/git-bisect-lk2009.txt index e99925184d..3ba49e85b7 100644 --- a/Documentation/git-bisect-lk2009.txt +++ b/Documentation/git-bisect-lk2009.txt @@ -158,7 +158,7 @@ Test suites are very nice. But when they are used alone, they are supposed to be used so that all the tests are checked after each commit. This means that they are not very efficient, because many tests are run for no interesting result, and they suffer from -combinational explosion. +combinatorial explosion. In fact the problem is that big software often has many different configuration options and that each test case should pass for each @@ -1350,9 +1350,9 @@ References - [[[1]]] https://www.nist.gov/sites/default/files/documents/director/planning/report02-3.pdf['The Economic Impacts of Inadequate Infratructure for Software Testing'. Nist Planning Report 02-3], see Executive Summary and Chapter 8. - [[[2]]] http://www.oracle.com/technetwork/java/codeconvtoc-136057.html['Code Conventions for the Java Programming Language'. Sun Microsystems.] - [[[3]]] https://en.wikipedia.org/wiki/Software_maintenance['Software maintenance'. Wikipedia.] -- [[[4]]] https://public-inbox.org/git/7vps5xsbwp.fsf_-_@assigned-by-dhcp.cox.net/[Junio C Hamano. 'Automated bisect success story'.] +- [[[4]]] https://lore.kernel.org/git/7vps5xsbwp.fsf_-_@assigned-by-dhcp.cox.net/[Junio C Hamano. 'Automated bisect success story'.] - [[[5]]] https://lwn.net/Articles/317154/[Christian Couder. 'Fully automated bisecting with "git bisect run"'. LWN.net.] - [[[6]]] https://lwn.net/Articles/277872/[Jonathan Corbet. 'Bisection divides users and developers'. LWN.net.] -- [[[7]]] http://marc.info/?l=linux-kernel&m=119702753411680&w=2[Ingo Molnar. 'Re: BUG 2.6.23-rc3 can't see sd partitions on Alpha'. Linux-kernel mailing list.] +- [[[7]]] https://lore.kernel.org/lkml/20071207113734.GA14598@elte.hu/[Ingo Molnar. 'Re: BUG 2.6.23-rc3 can't see sd partitions on Alpha'. Linux-kernel mailing list.] - [[[8]]] https://www.kernel.org/pub/software/scm/git/docs/git-bisect.html[Junio C Hamano and the git-list. 'git-bisect(1) Manual Page'. Linux Kernel Archives.] - [[[9]]] https://github.com/Ealdwulf/bbchop[Ealdwulf. 'bbchop'. GitHub.] diff --git a/Documentation/git-bisect.txt b/Documentation/git-bisect.txt index 4b45d837a7..7586c5a843 100644 --- a/Documentation/git-bisect.txt +++ b/Documentation/git-bisect.txt @@ -413,7 +413,7 @@ $ cat ~/test.sh # tweak the working tree by merging the hot-fix branch # and then attempt a build -if git merge --no-commit hot-fix && +if git merge --no-commit --no-ff hot-fix && make then # run project specific test and report its status diff --git a/Documentation/git-bundle.txt b/Documentation/git-bundle.txt index 7d6c9dcd17..d34b0964be 100644 --- a/Documentation/git-bundle.txt +++ b/Documentation/git-bundle.txt @@ -9,8 +9,8 @@ git-bundle - Move objects and refs by archive SYNOPSIS -------- [verse] -'git bundle' create <file> <git-rev-list-args> -'git bundle' verify <file> +'git bundle' create [-q | --quiet | --progress | --all-progress] [--all-progress-implied] <file> <git-rev-list-args> +'git bundle' verify [-q | --quiet] <file> 'git bundle' list-heads <file> [<refname>...] 'git bundle' unbundle <file> [<refname>...] @@ -20,11 +20,14 @@ DESCRIPTION Some workflows require that one or more branches of development on one machine be replicated on another machine, but the two machines cannot be directly connected, and therefore the interactive Git protocols (git, -ssh, http) cannot be used. This command provides support for -'git fetch' and 'git pull' to operate by packaging objects and references -in an archive at the originating machine, then importing those into -another repository using 'git fetch' and 'git pull' -after moving the archive by some means (e.g., by sneakernet). As no +ssh, http) cannot be used. + +The 'git bundle' command packages objects and references in an archive +at the originating machine, which can then be imported into another +repository using 'git fetch', 'git pull', or 'git clone', +after moving the archive by some means (e.g., by sneakernet). + +As no direct connection between the repositories exists, the user must specify a basis for the bundle that is held by the destination repository: the bundle assumes that all objects in the basis are already in the @@ -33,9 +36,11 @@ destination repository. OPTIONS ------- -create <file>:: +create [options] <file> <git-rev-list-args>:: Used to create a bundle named 'file'. This requires the - 'git-rev-list-args' arguments to define the bundle contents. + '<git-rev-list-args>' arguments to define the bundle contents. + 'options' contains the options specific to the 'git bundle create' + subcommand. verify <file>:: Used to check that a bundle file is valid and will apply @@ -75,6 +80,33 @@ unbundle <file>:: necessarily everything in the pack (in this case, 'git bundle' acts like 'git fetch-pack'). +--progress:: + Progress status is reported on the standard error stream + by default when it is attached to a terminal, unless -q + is specified. This flag forces progress status even if + the standard error stream is not directed to a terminal. + +--all-progress:: + When --stdout is specified then progress report is + displayed during the object count and compression phases + but inhibited during the write-out phase. The reason is + that in some cases the output stream is directly linked + to another command which may wish to display progress + status of its own as it processes incoming pack data. + This flag is like --progress except that it forces progress + report for the write-out phase as well even if --stdout is + used. + +--all-progress-implied:: + This is used to imply --all-progress whenever progress display + is activated. Unlike --all-progress this flag doesn't actually + force any progress display by itself. + +-q:: +--quiet:: + This flag makes the command not to report its progress + on the standard error stream. + SPECIFYING REFERENCES --------------------- @@ -92,6 +124,14 @@ It is okay to err on the side of caution, causing the bundle file to contain objects already in the destination, as these are ignored when unpacking at the destination. +`git clone` can use any bundle created without negative refspecs +(e.g., `new`, but not `old..new`). +If you want to match `git clone --mirror`, which would include your +refs such as `refs/remotes/*`, use `--all`. +If you want to provide the same set of refs that a clone directly +from the source repository would get, use `--branches --tags` for +the `<git-rev-list-args>`. + EXAMPLES -------- diff --git a/Documentation/git-check-attr.txt b/Documentation/git-check-attr.txt index 3c0578217b..84f41a8e82 100644 --- a/Documentation/git-check-attr.txt +++ b/Documentation/git-check-attr.txt @@ -32,7 +32,7 @@ OPTIONS instead of from the command-line. -z:: - The output format is modified to be machine-parseable. + The output format is modified to be machine-parsable. If `--stdin` is also given, input paths are separated with a NUL character instead of a linefeed character. diff --git a/Documentation/git-check-ignore.txt b/Documentation/git-check-ignore.txt index 8b42cb3fb2..8b2d49c79e 100644 --- a/Documentation/git-check-ignore.txt +++ b/Documentation/git-check-ignore.txt @@ -39,7 +39,7 @@ OPTIONS instead of from the command-line. -z:: - The output format is modified to be machine-parseable (see + The output format is modified to be machine-parsable (see below). If `--stdin` is also given, input paths are separated with a NUL character instead of a linefeed character. diff --git a/Documentation/git-checkout.txt b/Documentation/git-checkout.txt index cf3cac0a2b..c8fb995fa7 100644 --- a/Documentation/git-checkout.txt +++ b/Documentation/git-checkout.txt @@ -12,14 +12,14 @@ SYNOPSIS 'git checkout' [-q] [-f] [-m] --detach [<branch>] 'git checkout' [-q] [-f] [-m] [--detach] <commit> 'git checkout' [-q] [-f] [-m] [[-b|-B|--orphan] <new_branch>] [<start_point>] -'git checkout' [-f|--ours|--theirs|-m|--conflict=<style>] [<tree-ish>] [--] <paths>... -'git checkout' [<tree-ish>] [--] <pathspec>... -'git checkout' (-p|--patch) [<tree-ish>] [--] [<paths>...] +'git checkout' [-f|--ours|--theirs|-m|--conflict=<style>] [<tree-ish>] [--] <pathspec>... +'git checkout' [-f|--ours|--theirs|-m|--conflict=<style>] [<tree-ish>] --pathspec-from-file=<file> [--pathspec-file-nul] +'git checkout' (-p|--patch) [<tree-ish>] [--] [<pathspec>...] DESCRIPTION ----------- Updates files in the working tree to match the version in the index -or the specified tree. If no paths are given, 'git checkout' will +or the specified tree. If no pathspec was given, 'git checkout' will also update `HEAD` to set the specified branch as the current branch. @@ -79,13 +79,14 @@ be used to detach `HEAD` at the tip of the branch (`git checkout + Omitting `<branch>` detaches `HEAD` at the tip of the current branch. -'git checkout' [<tree-ish>] [--] <pathspec>...:: +'git checkout' [-f|--ours|--theirs|-m|--conflict=<style>] [<tree-ish>] [--] <pathspec>...:: +'git checkout' [-f|--ours|--theirs|-m|--conflict=<style>] [<tree-ish>] --pathspec-from-file=<file> [--pathspec-file-nul]:: - Overwrite paths in the working tree by replacing with the - contents in the index or in the `<tree-ish>` (most often a - commit). When a `<tree-ish>` is given, the paths that - match the `<pathspec>` are updated both in the index and in - the working tree. + Overwrite the contents of the files that match the pathspec. + When the `<tree-ish>` (most often a commit) is not given, + overwrite working tree with the contents in the index. + When the `<tree-ish>` is given, overwrite both the index and + the working tree with the contents at the `<tree-ish>`. + The index may contain unmerged entries because of a previous failed merge. By default, if you try to check out such an entry from the index, the @@ -96,12 +97,10 @@ using `--ours` or `--theirs`. With `-m`, changes made to the working tree file can be discarded to re-create the original conflicted merge result. 'git checkout' (-p|--patch) [<tree-ish>] [--] [<pathspec>...]:: - This is similar to the "check out paths to the working tree - from either the index or from a tree-ish" mode described - above, but lets you use the interactive interface to show - the "diff" output and choose which hunks to use in the - result. See below for the description of `--patch` option. - + This is similar to the previous mode, but lets you use the + interactive interface to show the "diff" output and choose which + hunks to use in the result. See below for the description of + `--patch` option. OPTIONS ------- @@ -309,6 +308,19 @@ Note that this option uses the no overlay mode by default (see also working tree, but not in `<tree-ish>` are removed, to make them match `<tree-ish>` exactly. +--pathspec-from-file=<file>:: + Pathspec is passed in `<file>` instead of commandline args. If + `<file>` is exactly `-` then standard input is used. Pathspec + elements are separated by LF or CR/LF. Pathspec elements can be + quoted as explained for the configuration variable `core.quotePath` + (see linkgit:git-config[1]). See also `--pathspec-file-nul` and + global `--literal-pathspecs`. + +--pathspec-file-nul:: + Only meaningful with `--pathspec-from-file`. Pathspec elements are + separated with NUL character and all other characters are taken + literally (including newlines and quotes). + <branch>:: Branch to checkout; if it refers to a branch (i.e., a name that, when prepended with "refs/heads/", is a valid ref), then that @@ -339,7 +351,13 @@ leave out at most one of `A` and `B`, in which case it defaults to `HEAD`. Tree to checkout from (when paths are given). If not specified, the index will be used. +\--:: + Do not interpret any more arguments as options. +<pathspec>...:: + Limits the paths affected by the operation. ++ +For more details, see the 'pathspec' entry in linkgit:gitglossary[7]. DETACHED HEAD ------------- diff --git a/Documentation/git-clone.txt b/Documentation/git-clone.txt index 34011c2940..bf24f1813a 100644 --- a/Documentation/git-clone.txt +++ b/Documentation/git-clone.txt @@ -15,7 +15,7 @@ SYNOPSIS [--dissociate] [--separate-git-dir <git dir>] [--depth <depth>] [--[no-]single-branch] [--no-tags] [--recurse-submodules[=<pathspec>]] [--[no-]shallow-submodules] - [--[no-]remote-submodules] [--jobs <n>] [--] <repository> + [--[no-]remote-submodules] [--jobs <n>] [--sparse] [--] <repository> [<directory>] DESCRIPTION @@ -156,6 +156,12 @@ objects from the source repository into a pack in the cloned repository. used, neither remote-tracking branches nor the related configuration variables are created. +--sparse:: + Initialize the sparse-checkout file so the working + directory starts with only the files in the root + of the repository. The sparse-checkout file can be + modified to grow the working directory as needed. + --mirror:: Set up a mirror of the source repository. This implies `--bare`. Compared to `--bare`, `--mirror` not only maps local branches of the @@ -262,9 +268,9 @@ or `--mirror` is given) All submodules which are cloned will be shallow with a depth of 1. --[no-]remote-submodules:: - All submodules which are cloned will use the status of the submodule’s + All submodules which are cloned will use the status of the submodule's remote-tracking branch to update the submodule, rather than the - superproject’s recorded SHA-1. Equivalent to passing `--remote` to + superproject's recorded SHA-1. Equivalent to passing `--remote` to `git submodule update`. --separate-git-dir=<git dir>:: diff --git a/Documentation/git-commit-graph.txt b/Documentation/git-commit-graph.txt index 8c708a7a16..bcd85c1976 100644 --- a/Documentation/git-commit-graph.txt +++ b/Documentation/git-commit-graph.txt @@ -9,7 +9,6 @@ git-commit-graph - Write and verify Git commit-graph files SYNOPSIS -------- [verse] -'git commit-graph read' [--object-dir <dir>] 'git commit-graph verify' [--object-dir <dir>] [--shallow] [--[no-]progress] 'git commit-graph write' <options> [--object-dir <dir>] [--[no-]progress] @@ -74,11 +73,6 @@ Finally, if `--expire-time=<datetime>` is not specified, let `datetime` be the current time. After writing the split commit-graph, delete all unused commit-graph whose modified times are older than `datetime`. -'read':: - -Read the commit-graph file and output basic details about it. -Used for debugging purposes. - 'verify':: Read the commit-graph file and verify its contents against the object @@ -118,12 +112,6 @@ $ git show-ref -s | git commit-graph write --stdin-commits $ git rev-parse HEAD | git commit-graph write --stdin-commits --append ------------------------------------------------ -* Read basic information from the commit-graph file. -+ ------------------------------------------------- -$ git commit-graph read ------------------------------------------------- - GIT --- diff --git a/Documentation/git-commit.txt b/Documentation/git-commit.txt index afa7b75a23..ced5a9beab 100644 --- a/Documentation/git-commit.txt +++ b/Documentation/git-commit.txt @@ -13,7 +13,8 @@ SYNOPSIS [-F <file> | -m <msg>] [--reset-author] [--allow-empty] [--allow-empty-message] [--no-verify] [-e] [--author=<author>] [--date=<date>] [--cleanup=<mode>] [--[no-]status] - [-i | -o] [-S[<keyid>]] [--] [<file>...] + [-i | -o] [--pathspec-from-file=<file> [--pathspec-file-nul]] + [-S[<keyid>]] [--] [<pathspec>...] DESCRIPTION ----------- @@ -278,6 +279,19 @@ FROM UPSTREAM REBASE" section in linkgit:git-rebase[1].) already been staged. If used together with `--allow-empty` paths are also not required, and an empty commit will be created. +--pathspec-from-file=<file>:: + Pathspec is passed in `<file>` instead of commandline args. If + `<file>` is exactly `-` then standard input is used. Pathspec + elements are separated by LF or CR/LF. Pathspec elements can be + quoted as explained for the configuration variable `core.quotePath` + (see linkgit:git-config[1]). See also `--pathspec-file-nul` and + global `--literal-pathspecs`. + +--pathspec-file-nul:: + Only meaningful with `--pathspec-from-file`. Pathspec elements are + separated with NUL character and all other characters are taken + literally (including newlines and quotes). + -u[<mode>]:: --untracked-files[=<mode>]:: Show untracked files. @@ -345,12 +359,13 @@ changes to tracked files. \--:: Do not interpret any more arguments as options. -<file>...:: - When files are given on the command line, the command - commits the contents of the named files, without - recording the changes already staged. The contents of - these files are also staged for the next commit on top - of what have been staged before. +<pathspec>...:: + When pathspec is given on the command line, commit the contents of + the files that match the pathspec without recording the changes + already added to the index. The contents of these files are also + staged for the next commit on top of what have been staged before. ++ +For more details, see the 'pathspec' entry in linkgit:gitglossary[7]. :git-commit: 1 include::date-formats.txt[] diff --git a/Documentation/git-credential.txt b/Documentation/git-credential.txt index b211440373..6f0c7ca80f 100644 --- a/Documentation/git-credential.txt +++ b/Documentation/git-credential.txt @@ -19,8 +19,7 @@ from system-specific helpers, as well as prompting the user for usernames and passwords. The git-credential command exposes this interface to scripts which may want to retrieve, store, or prompt for credentials in the same manner as Git. The design of this scriptable -interface models the internal C API; see -link:technical/api-credentials.html[the Git credential API] for more +interface models the internal C API; see credential.h for more background on the concepts. git-credential takes an "action" option on the command-line (one of diff --git a/Documentation/git-cvsserver.txt b/Documentation/git-cvsserver.txt index 79e22b1f3a..1b1c71ad9d 100644 --- a/Documentation/git-cvsserver.txt +++ b/Documentation/git-cvsserver.txt @@ -294,7 +294,7 @@ In `dbDriver` and `dbUser` you can use the following variables: Git directory name %g:: Git directory name, where all characters except for - alpha-numeric ones, `.`, and `-` are replaced with + alphanumeric ones, `.`, and `-` are replaced with `_` (this should make it easier to use the directory name in a filename if wanted) %m:: diff --git a/Documentation/git-diff.txt b/Documentation/git-diff.txt index 72179d993c..37781cf175 100644 --- a/Documentation/git-diff.txt +++ b/Documentation/git-diff.txt @@ -36,7 +36,7 @@ two blob objects, or changes between two files on disk. running the command in a working tree controlled by Git and at least one of the paths points outside the working tree, or when running the command outside a working tree - controlled by Git. + controlled by Git. This form implies `--exit-code`. 'git diff' [<options>] --cached [<commit>] [--] [<path>...]:: diff --git a/Documentation/git-fast-export.txt b/Documentation/git-fast-export.txt index 37634bffd1..e8950de3ba 100644 --- a/Documentation/git-fast-export.txt +++ b/Documentation/git-fast-export.txt @@ -142,7 +142,7 @@ by keeping the marks the same across runs. Specify how to handle `encoding` header in commit objects. When asking to 'abort' (which is the default), this program will die when encountering such a commit object. With 'yes', the commit - message will be reencoded into UTF-8. With 'no', the original + message will be re-encoded into UTF-8. With 'no', the original encoding will be preserved. --refspec:: diff --git a/Documentation/git-filter-branch.txt b/Documentation/git-filter-branch.txt index 5876598852..a530fef7e5 100644 --- a/Documentation/git-filter-branch.txt +++ b/Documentation/git-filter-branch.txt @@ -466,13 +466,13 @@ The performance of git-filter-branch is glacially slow; its design makes it impossible for a backward-compatible implementation to ever be fast: * In editing files, git-filter-branch by design checks out each and -every commit as it existed in the original repo. If your repo has 10\^5 -files and 10\^5 commits, but each commit only modifies 5 files, then -git-filter-branch will make you do 10\^10 modifications, despite only -having (at most) 5*10^5 unique blobs. + every commit as it existed in the original repo. If your repo has + 10\^5 files and 10\^5 commits, but each commit only modifies 5 + files, then git-filter-branch will make you do 10\^10 modifications, + despite only having (at most) 5*10^5 unique blobs. * If you try and cheat and try to make git-filter-branch only work on -files modified in a commit, then two things happen + files modified in a commit, then two things happen ** you run into problems with deletions whenever the user is simply trying to rename files (because attempting to delete files that @@ -481,39 +481,41 @@ files modified in a commit, then two things happen user-provided shell) ** even if you succeed at the map-deletes-for-renames chicanery, you - still technically violate backward compatibility because users are - allowed to filter files in ways that depend upon topology of - commits instead of filtering solely based on file contents or names - (though this has not been observed in the wild). + still technically violate backward compatibility because users + are allowed to filter files in ways that depend upon topology of + commits instead of filtering solely based on file contents or + names (though this has not been observed in the wild). * Even if you don't need to edit files but only want to e.g. rename or -remove some and thus can avoid checking out each file (i.e. you can use ---index-filter), you still are passing shell snippets for your filters. -This means that for every commit, you have to have a prepared git repo -where those filters can be run. That's a significant setup. - -* Further, several additional files are created or updated per commit by -git-filter-branch. Some of these are for supporting the convenience -functions provided by git-filter-branch (such as map()), while others -are for keeping track of internal state (but could have also been -accessed by user filters; one of git-filter-branch's regression tests -does so). This essentially amounts to using the filesystem as an IPC -mechanism between git-filter-branch and the user-provided filters. -Disks tend to be a slow IPC mechanism, and writing these files also -effectively represents a forced synchronization point between separate -processes that we hit with every commit. + remove some and thus can avoid checking out each file (i.e. you can + use --index-filter), you still are passing shell snippets for your + filters. This means that for every commit, you have to have a + prepared git repo where those filters can be run. That's a + significant setup. + +* Further, several additional files are created or updated per commit + by git-filter-branch. Some of these are for supporting the + convenience functions provided by git-filter-branch (such as map()), + while others are for keeping track of internal state (but could have + also been accessed by user filters; one of git-filter-branch's + regression tests does so). This essentially amounts to using the + filesystem as an IPC mechanism between git-filter-branch and the + user-provided filters. Disks tend to be a slow IPC mechanism, and + writing these files also effectively represents a forced + synchronization point between separate processes that we hit with + every commit. * The user-provided shell commands will likely involve a pipeline of -commands, resulting in the creation of many processes per commit. -Creating and running another process takes a widely varying amount of -time between operating systems, but on any platform it is very slow -relative to invoking a function. + commands, resulting in the creation of many processes per commit. + Creating and running another process takes a widely varying amount + of time between operating systems, but on any platform it is very + slow relative to invoking a function. * git-filter-branch itself is written in shell, which is kind of slow. -This is the one performance issue that could be backward-compatibly -fixed, but compared to the above problems that are intrinsic to the -design of git-filter-branch, the language of the tool itself is a -relatively minor issue. + This is the one performance issue that could be backward-compatibly + fixed, but compared to the above problems that are intrinsic to the + design of git-filter-branch, the language of the tool itself is a + relatively minor issue. ** Side note: Unfortunately, people tend to fixate on the written-in-shell aspect and periodically ask if git-filter-branch @@ -534,7 +536,7 @@ repo-filter' also provides https://github.com/newren/git-filter-repo/blob/master/contrib/filter-repo-demos/filter-lamely[filter-lamely], a drop-in git-filter-branch replacement (with a few caveats). While filter-lamely suffers from all the same safety issues as -git-filter-branch, it at least ameloriates the performance issues a +git-filter-branch, it at least ameliorates the performance issues a little. [[SAFETY]] @@ -546,51 +548,55 @@ easily corrupt repos or end up with a mess worse than what you started with: * Someone can have a set of "working and tested filters" which they -document or provide to a coworker, who then runs them on a different OS -where the same commands are not working/tested (some examples in the -git-filter-branch manpage are also affected by this). BSD vs. GNU -userland differences can really bite. If lucky, error messages are -spewed. But just as likely, the commands either don't do the filtering -requested, or silently corrupt by making some unwanted change. The -unwanted change may only affect a few commits, so it's not necessarily -obvious either. (The fact that problems won't necessarily be obvious -means they are likely to go unnoticed until the rewritten history is in -use for quite a while, at which point it's really hard to justify -another flag-day for another rewrite.) + document or provide to a coworker, who then runs them on a different + OS where the same commands are not working/tested (some examples in + the git-filter-branch manpage are also affected by this). + BSD vs. GNU userland differences can really bite. If lucky, error + messages are spewed. But just as likely, the commands either don't + do the filtering requested, or silently corrupt by making some + unwanted change. The unwanted change may only affect a few commits, + so it's not necessarily obvious either. (The fact that problems + won't necessarily be obvious means they are likely to go unnoticed + until the rewritten history is in use for quite a while, at which + point it's really hard to justify another flag-day for another + rewrite.) * Filenames with spaces are often mishandled by shell snippets since -they cause problems for shell pipelines. Not everyone is familiar with -find -print0, xargs -0, git-ls-files -z, etc. Even people who are -familiar with these may assume such flags are not relevant because -someone else renamed any such files in their repo back before the person -doing the filtering joined the project. And often, even those familiar -with handling arguments with spaces may not do so just because they -aren't in the mindset of thinking about everything that could possibly -go wrong. - -* Non-ascii filenames can be silently removed despite being in a desired -directory. Keeping only wanted paths is often done using pipelines like -`git ls-files | grep -v ^WANTED_DIR/ | xargs git rm`. ls-files will -only quote filenames if needed, so folks may not notice that one of the -files didn't match the regex (at least not until it's much too late). -Yes, someone who knows about core.quotePath can avoid this (unless they -have other special characters like \t, \n, or "), and people who use -ls-files -z with something other than grep can avoid this, but that -doesn't mean they will. - -* Similarly, when moving files around, one can find that filenames with -non-ascii or special characters end up in a different directory, one -that includes a double quote character. (This is technically the same -issue as above with quoting, but perhaps an interesting different way -that it can and has manifested as a problem.) + they cause problems for shell pipelines. Not everyone is familiar + with find -print0, xargs -0, git-ls-files -z, etc. Even people who + are familiar with these may assume such flags are not relevant + because someone else renamed any such files in their repo back + before the person doing the filtering joined the project. And + often, even those familiar with handling arguments with spaces may + not do so just because they aren't in the mindset of thinking about + everything that could possibly go wrong. + +* Non-ascii filenames can be silently removed despite being in a + desired directory. Keeping only wanted paths is often done using + pipelines like `git ls-files | grep -v ^WANTED_DIR/ | xargs git rm`. + ls-files will only quote filenames if needed, so folks may not + notice that one of the files didn't match the regex (at least not + until it's much too late). Yes, someone who knows about + core.quotePath can avoid this (unless they have other special + characters like \t, \n, or "), and people who use ls-files -z with + something other than grep can avoid this, but that doesn't mean they + will. + +* Similarly, when moving files around, one can find that filenames + with non-ascii or special characters end up in a different + directory, one that includes a double quote character. (This is + technically the same issue as above with quoting, but perhaps an + interesting different way that it can and has manifested as a + problem.) * It's far too easy to accidentally mix up old and new history. It's -still possible with any tool, but git-filter-branch almost invites it. -If lucky, the only downside is users getting frustrated that they don't -know how to shrink their repo and remove the old stuff. If unlucky, -they merge old and new history and end up with multiple "copies" of each -commit, some of which have unwanted or sensitive files and others which -don't. This comes about in multiple different ways: + still possible with any tool, but git-filter-branch almost + invites it. If lucky, the only downside is users getting frustrated + that they don't know how to shrink their repo and remove the old + stuff. If unlucky, they merge old and new history and end up with + multiple "copies" of each commit, some of which have unwanted or + sensitive files and others which don't. This comes about in + multiple different ways: ** the default to only doing a partial history rewrite ('--all' is not the default and few examples show it) @@ -609,8 +615,8 @@ don't. This comes about in multiple different ways: "DISCUSSION" section of the git filter-repo manual page for more details. -* Annotated tags can be accidentally converted to lightweight tags, due -to either of two issues: +* Annotated tags can be accidentally converted to lightweight tags, + due to either of two issues: ** Someone can do a history rewrite, realize they messed up, restore from the backups in refs/original/, and then redo their @@ -623,71 +629,74 @@ to either of two issues: restored from refs/original/ in a previously botched rewrite). * Any commit messages that specify an encoding will become corrupted -by the rewrite; git-filter-branch ignores the encoding, takes the original -bytes, and feeds it to commit-tree without telling it the proper -encoding. (This happens whether or not --msg-filter is used.) + by the rewrite; git-filter-branch ignores the encoding, takes the + original bytes, and feeds it to commit-tree without telling it the + proper encoding. (This happens whether or not --msg-filter is + used.) * Commit messages (even if they are all UTF-8) by default become -corrupted due to not being updated -- any references to other commit -hashes in commit messages will now refer to no-longer-extant commits. - -* There are no facilities for helping users find what unwanted crud they -should delete, which means they are much more likely to have incomplete -or partial cleanups that sometimes result in confusion and people -wasting time trying to understand. (For example, folks tend to just -look for big files to delete instead of big directories or extensions, -and once they do so, then sometime later folks using the new repository -who are going through history will notice a build artifact directory -that has some files but not others, or a cache of dependencies -(node_modules or similar) which couldn't have ever been functional since -it's missing some files.) + corrupted due to not being updated -- any references to other commit + hashes in commit messages will now refer to no-longer-extant + commits. + +* There are no facilities for helping users find what unwanted crud + they should delete, which means they are much more likely to have + incomplete or partial cleanups that sometimes result in confusion + and people wasting time trying to understand. (For example, folks + tend to just look for big files to delete instead of big directories + or extensions, and once they do so, then sometime later folks using + the new repository who are going through history will notice a build + artifact directory that has some files but not others, or a cache of + dependencies (node_modules or similar) which couldn't have ever been + functional since it's missing some files.) * If --prune-empty isn't specified, then the filtering process can -create hoards of confusing empty commits + create hoards of confusing empty commits * If --prune-empty is specified, then intentionally placed empty -commits from before the filtering operation are also pruned instead of -just pruning commits that became empty due to filtering rules. + commits from before the filtering operation are also pruned instead + of just pruning commits that became empty due to filtering rules. -* If --prune empty is specified, sometimes empty commits are missed -and left around anyway (a somewhat rare bug, but it happens...) +* If --prune-empty is specified, sometimes empty commits are missed + and left around anyway (a somewhat rare bug, but it happens...) * A minor issue, but users who have a goal to update all names and -emails in a repository may be led to --env-filter which will only update -authors and committers, missing taggers. + emails in a repository may be led to --env-filter which will only + update authors and committers, missing taggers. * If the user provides a --tag-name-filter that maps multiple tags to -the same name, no warning or error is provided; git-filter-branch simply -overwrites each tag in some undocumented pre-defined order resulting in -only one tag at the end. (A git-filter-branch regression test requires -this surprising behavior.) + the same name, no warning or error is provided; git-filter-branch + simply overwrites each tag in some undocumented pre-defined order + resulting in only one tag at the end. (A git-filter-branch + regression test requires this surprising behavior.) Also, the poor performance of git-filter-branch often leads to safety issues: -* Coming up with the correct shell snippet to do the filtering you want -is sometimes difficult unless you're just doing a trivial modification -such as deleting a couple files. Unfortunately, people often learn if -the snippet is right or wrong by trying it out, but the rightness or -wrongness can vary depending on special circumstances (spaces in -filenames, non-ascii filenames, funny author names or emails, invalid -timezones, presence of grafts or replace objects, etc.), meaning they -may have to wait a long time, hit an error, then restart. The -performance of git-filter-branch is so bad that this cycle is painful, -reducing the time available to carefully re-check (to say nothing about -what it does to the patience of the person doing the rewrite even if -they do technically have more time available). This problem is extra -compounded because errors from broken filters may not be shown for a -long time and/or get lost in a sea of output. Even worse, broken -filters often just result in silent incorrect rewrites. - -* To top it all off, even when users finally find working commands, they -naturally want to share them. But they may be unaware that their repo -didn't have some special cases that someone else's does. So, when -someone else with a different repository runs the same commands, they -get hit by the problems above. Or, the user just runs commands that -really were vetted for special cases, but they run it on a different OS -where it doesn't work, as noted above. +* Coming up with the correct shell snippet to do the filtering you + want is sometimes difficult unless you're just doing a trivial + modification such as deleting a couple files. Unfortunately, people + often learn if the snippet is right or wrong by trying it out, but + the rightness or wrongness can vary depending on special + circumstances (spaces in filenames, non-ascii filenames, funny + author names or emails, invalid timezones, presence of grafts or + replace objects, etc.), meaning they may have to wait a long time, + hit an error, then restart. The performance of git-filter-branch is + so bad that this cycle is painful, reducing the time available to + carefully re-check (to say nothing about what it does to the + patience of the person doing the rewrite even if they do technically + have more time available). This problem is extra compounded because + errors from broken filters may not be shown for a long time and/or + get lost in a sea of output. Even worse, broken filters often just + result in silent incorrect rewrites. + +* To top it all off, even when users finally find working commands, + they naturally want to share them. But they may be unaware that + their repo didn't have some special cases that someone else's does. + So, when someone else with a different repository runs the same + commands, they get hit by the problems above. Or, the user just + runs commands that really were vetted for special cases, but they + run it on a different OS where it doesn't work, as noted above. GIT --- diff --git a/Documentation/git-format-patch.txt b/Documentation/git-format-patch.txt index 2035d4d5d5..0d4f8951bb 100644 --- a/Documentation/git-format-patch.txt +++ b/Documentation/git-format-patch.txt @@ -19,6 +19,7 @@ SYNOPSIS [--start-number <n>] [--numbered-files] [--in-reply-to=<message id>] [--suffix=.<sfx>] [--ignore-if-in-upstream] + [--cover-from-description=<mode>] [--rfc] [--subject-prefix=<subject prefix>] [(--reroll-count|-v) <n>] [--to=<email>] [--cc=<email>] @@ -172,6 +173,26 @@ will want to ensure that threading is disabled for `git send-email`. patches being generated, and any patch that matches is ignored. +--cover-from-description=<mode>:: + Controls which parts of the cover letter will be automatically + populated using the branch's description. ++ +If `<mode>` is `message` or `default`, the cover letter subject will be +populated with placeholder text. The body of the cover letter will be +populated with the branch's description. This is the default mode when +no configuration nor command line option is specified. ++ +If `<mode>` is `subject`, the first paragraph of the branch description will +populate the cover letter subject. The remainder of the description will +populate the body of the cover letter. ++ +If `<mode>` is `auto`, if the first paragraph of the branch description +is greater than 100 bytes, then the mode will be `message`, otherwise +`subject` will be used. ++ +If `<mode>` is `none`, both the cover letter subject and body will be +populated with placeholder text. + --subject-prefix=<subject prefix>:: Instead of the standard '[PATCH]' prefix in the subject line, instead use '[<subject prefix>]'. This @@ -312,11 +333,12 @@ you can use `--suffix=-patch` to get `0001-description-of-my-change-patch`. Output an all-zero hash in each patch's From header instead of the hash of the commit. ---base=<commit>:: +--[no-]base[=<commit>]:: Record the base tree information to identify the state the patch series applies to. See the BASE TREE INFORMATION section below for details. If <commit> is "auto", a base commit is - automatically chosen. + automatically chosen. The `--no-base` option overrides a + `format.useAutoBase` configuration. --root:: Treat the revision argument as a <revision range>, even if it @@ -348,6 +370,7 @@ with configuration variables. signOff = true outputDirectory = <directory> coverLetter = auto + coverFromDescription = auto ------------ diff --git a/Documentation/git-multi-pack-index.txt b/Documentation/git-multi-pack-index.txt index 233b2b7862..642d9ac5b7 100644 --- a/Documentation/git-multi-pack-index.txt +++ b/Documentation/git-multi-pack-index.txt @@ -9,7 +9,7 @@ git-multi-pack-index - Write and verify multi-pack-indexes SYNOPSIS -------- [verse] -'git multi-pack-index' [--object-dir=<dir>] <subcommand> +'git multi-pack-index' [--object-dir=<dir>] [--[no-]progress] <subcommand> DESCRIPTION ----------- @@ -23,6 +23,10 @@ OPTIONS `<dir>/packs/multi-pack-index` for the current MIDX file, and `<dir>/packs` for the pack-files to index. +--[no-]progress:: + Turn progress on/off explicitly. If neither is specified, progress is + shown if standard error is connected to a terminal. + The following subcommands are available: write:: diff --git a/Documentation/git-notes.txt b/Documentation/git-notes.txt index f56a5a9197..ced2e8280e 100644 --- a/Documentation/git-notes.txt +++ b/Documentation/git-notes.txt @@ -10,7 +10,7 @@ SYNOPSIS [verse] 'git notes' [list [<object>]] 'git notes' add [-f] [--allow-empty] [-F <file> | -m <msg> | (-c | -C) <object>] [<object>] -'git notes' copy [-f] ( --stdin | <from-object> <to-object> ) +'git notes' copy [-f] ( --stdin | <from-object> [<to-object>] ) 'git notes' append [--allow-empty] [-F <file> | -m <msg> | (-c | -C) <object>] [<object>] 'git notes' edit [--allow-empty] [<object>] 'git notes' show [<object>] @@ -68,8 +68,8 @@ add:: subcommand). copy:: - Copy the notes for the first object onto the second object. - Abort if the second object already has notes, or if the first + Copy the notes for the first object onto the second object (defaults to + HEAD). Abort if the second object already has notes, or if the first object has none (use -f to overwrite existing notes to the second object). This subcommand is equivalent to: `git notes add [-f] -C $(git notes list <from-object>) <to-object>` diff --git a/Documentation/git-range-diff.txt b/Documentation/git-range-diff.txt index 8a6ea2c6c5..9701c1e5fd 100644 --- a/Documentation/git-range-diff.txt +++ b/Documentation/git-range-diff.txt @@ -57,6 +57,10 @@ to revert to color all lines according to the outer diff markers See the ``Algorithm`` section below for an explanation why this is needed. +--[no-]notes[=<ref>]:: + This flag is passed to the `git log` program + (see linkgit:git-log[1]) that generates the patches. + <range1> <range2>:: Compare the commits specified by the two ranges, where `<range1>` is considered an older version of `<range2>`. @@ -75,7 +79,7 @@ to revert to color all lines according to the outer diff markers linkgit:git-diff[1]), most notably the `--color=[<when>]` and `--no-color` options. These options are used when generating the "diff between patches", i.e. to compare the author, commit message and diff of -corresponding old/new commits. There is currently no means to tweak the +corresponding old/new commits. There is currently no means to tweak most of the diff options passed to `git log` when generating those patches. OUTPUT STABILITY @@ -242,7 +246,7 @@ corresponding. The overall time needed to compute this algorithm is the time needed to compute n+m commit diffs and then n*m diffs of patches, plus the time -needed to compute the least-cost assigment between n and m diffs. Git +needed to compute the least-cost assignment between n and m diffs. Git uses an implementation of the Jonker-Volgenant algorithm to solve the assignment problem, which has cubic runtime complexity. The matching found in this case will look like this: diff --git a/Documentation/git-read-tree.txt b/Documentation/git-read-tree.txt index d271842608..da33f84f33 100644 --- a/Documentation/git-read-tree.txt +++ b/Documentation/git-read-tree.txt @@ -436,7 +436,7 @@ support. SEE ALSO -------- linkgit:git-write-tree[1]; linkgit:git-ls-files[1]; -linkgit:gitignore[5] +linkgit:gitignore[5]; linkgit:git-sparse-checkout[1]; GIT --- diff --git a/Documentation/git-rebase.txt b/Documentation/git-rebase.txt index 639a4179d1..1d0e2d27cc 100644 --- a/Documentation/git-rebase.txt +++ b/Documentation/git-rebase.txt @@ -393,16 +393,31 @@ your branch contains commits which were dropped, this option can be used with `--keep-base` in order to drop those commits from your branch. --ignore-whitespace:: + Behaves differently depending on which backend is selected. ++ +'am' backend: When applying a patch, ignore changes in whitespace in +context lines if necessary. ++ +'interactive' backend: Treat lines with only whitespace changes as +unchanged for the sake of a three-way merge. + --whitespace=<option>:: - These flag are passed to the 'git apply' program + This flag is passed to the 'git apply' program (see linkgit:git-apply[1]) that applies the patch. + See also INCOMPATIBLE OPTIONS below. --committer-date-is-author-date:: + Instead of recording the time the rebased commits are + created as the committer date, reuse the author date + as the committer date. This implies --force-rebase. + --ignore-date:: - These flags are passed to 'git am' to easily change the dates - of the rebased commits (see linkgit:git-am[1]). +--reset-author-date:: + By default, the author date of the original commit is used + as the author date for the resulting commit. This option + tells Git to use the current timestamp instead and implies + `--force-rebase`. + See also INCOMPATIBLE OPTIONS below. @@ -443,8 +458,8 @@ the `rebase-cousins` mode is turned on, such commits are instead rebased onto `<upstream>` (or `<onto>`, if specified). + The `--rebase-merges` mode is similar in spirit to the deprecated -`--preserve-merges`, but in contrast to that option works well in interactive -rebases: commits can be reordered, inserted and dropped at will. +`--preserve-merges` but works with interactive rebases, +where commits can be reordered, inserted and dropped at will. + It is currently only possible to recreate the merge commits using the `recursive` merge strategy; Different merge strategies can be used only via @@ -539,10 +554,7 @@ INCOMPATIBLE OPTIONS The following options: - * --committer-date-is-author-date - * --ignore-date * --whitespace - * --ignore-whitespace * -C are incompatible with the following options: @@ -565,6 +577,9 @@ In addition, the following pairs of options are incompatible: * --preserve-merges and --interactive * --preserve-merges and --signoff * --preserve-merges and --rebase-merges + * --preserve-merges and --ignore-whitespace + * --preserve-merges and --committer-date-is-author-date + * --preserve-merges and --ignore-date * --keep-base and --onto * --keep-base and --root diff --git a/Documentation/git-reset.txt b/Documentation/git-reset.txt index 97e0544d9e..932080c55d 100644 --- a/Documentation/git-reset.txt +++ b/Documentation/git-reset.txt @@ -8,34 +8,36 @@ git-reset - Reset current HEAD to the specified state SYNOPSIS -------- [verse] -'git reset' [-q] [<tree-ish>] [--] <paths>... -'git reset' (--patch | -p) [<tree-ish>] [--] [<paths>...] +'git reset' [-q] [<tree-ish>] [--] <pathspec>... +'git reset' [-q] [--pathspec-from-file=<file> [--pathspec-file-nul]] [<tree-ish>] +'git reset' (--patch | -p) [<tree-ish>] [--] [<pathspec>...] 'git reset' [--soft | --mixed [-N] | --hard | --merge | --keep] [-q] [<commit>] DESCRIPTION ----------- -In the first and second form, copy entries from `<tree-ish>` to the index. -In the third form, set the current branch head (`HEAD`) to `<commit>`, +In the first three forms, copy entries from `<tree-ish>` to the index. +In the last form, set the current branch head (`HEAD`) to `<commit>`, optionally modifying index and working tree to match. The `<tree-ish>`/`<commit>` defaults to `HEAD` in all forms. -'git reset' [-q] [<tree-ish>] [--] <paths>...:: - This form resets the index entries for all `<paths>` to their - state at `<tree-ish>`. (It does not affect the working tree or - the current branch.) +'git reset' [-q] [<tree-ish>] [--] <pathspec>...:: +'git reset' [-q] [--pathspec-from-file=<file> [--pathspec-file-nul]] [<tree-ish>]:: + These forms reset the index entries for all paths that match the + `<pathspec>` to their state at `<tree-ish>`. (It does not affect + the working tree or the current branch.) + -This means that `git reset <paths>` is the opposite of `git add -<paths>`. This command is equivalent to -`git restore [--source=<tree-ish>] --staged <paths>...`. +This means that `git reset <pathspec>` is the opposite of `git add +<pathspec>`. This command is equivalent to +`git restore [--source=<tree-ish>] --staged <pathspec>...`. + -After running `git reset <paths>` to update the index entry, you can +After running `git reset <pathspec>` to update the index entry, you can use linkgit:git-restore[1] to check the contents out of the index to the working tree. Alternatively, using linkgit:git-restore[1] and specifying a commit with `--source`, you can copy the contents of a path out of a commit to the index and to the working tree in one go. -'git reset' (--patch | -p) [<tree-ish>] [--] [<paths>...]:: +'git reset' (--patch | -p) [<tree-ish>] [--] [<pathspec>...]:: Interactively select hunks in the difference between the index and `<tree-ish>` (defaults to `HEAD`). The chosen hunks are applied in reverse to the index. @@ -101,6 +103,26 @@ OPTIONS `reset.quiet` config option. `--quiet` and `--no-quiet` will override the default behavior. +--pathspec-from-file=<file>:: + Pathspec is passed in `<file>` instead of commandline args. If + `<file>` is exactly `-` then standard input is used. Pathspec + elements are separated by LF or CR/LF. Pathspec elements can be + quoted as explained for the configuration variable `core.quotePath` + (see linkgit:git-config[1]). See also `--pathspec-file-nul` and + global `--literal-pathspecs`. + +--pathspec-file-nul:: + Only meaningful with `--pathspec-from-file`. Pathspec elements are + separated with NUL character and all other characters are taken + literally (including newlines and quotes). + +\--:: + Do not interpret any more arguments as options. + +<pathspec>...:: + Limits the paths affected by the operation. ++ +For more details, see the 'pathspec' entry in linkgit:gitglossary[7]. EXAMPLES -------- diff --git a/Documentation/git-restore.txt b/Documentation/git-restore.txt index 1ab2e40ea9..5bf60d4943 100644 --- a/Documentation/git-restore.txt +++ b/Documentation/git-restore.txt @@ -8,8 +8,9 @@ git-restore - Restore working tree files SYNOPSIS -------- [verse] -'git restore' [<options>] [--source=<tree>] [--staged] [--worktree] <pathspec>... -'git restore' (-p|--patch) [<options>] [--source=<tree>] [--staged] [--worktree] [<pathspec>...] +'git restore' [<options>] [--source=<tree>] [--staged] [--worktree] [--] <pathspec>... +'git restore' [<options>] [--source=<tree>] [--staged] [--worktree] --pathspec-from-file=<file> [--pathspec-file-nul] +'git restore' (-p|--patch) [<options>] [--source=<tree>] [--staged] [--worktree] [--] [<pathspec>...] DESCRIPTION ----------- @@ -113,6 +114,27 @@ in linkgit:git-checkout[1] for details. appear in the `--source` tree are removed, to make them match `<tree>` exactly. The default is no-overlay mode. +--pathspec-from-file=<file>:: + Pathspec is passed in `<file>` instead of commandline args. If + `<file>` is exactly `-` then standard input is used. Pathspec + elements are separated by LF or CR/LF. Pathspec elements can be + quoted as explained for the configuration variable `core.quotePath` + (see linkgit:git-config[1]). See also `--pathspec-file-nul` and + global `--literal-pathspecs`. + +--pathspec-file-nul:: + Only meaningful with `--pathspec-from-file`. Pathspec elements are + separated with NUL character and all other characters are taken + literally (including newlines and quotes). + +\--:: + Do not interpret any more arguments as options. + +<pathspec>...:: + Limits the paths affected by the operation. ++ +For more details, see the 'pathspec' entry in linkgit:gitglossary[7]. + EXAMPLES -------- diff --git a/Documentation/git-rev-parse.txt b/Documentation/git-rev-parse.txt index e72d332b83..19b12b6d43 100644 --- a/Documentation/git-rev-parse.txt +++ b/Documentation/git-rev-parse.txt @@ -262,7 +262,8 @@ print a message to stderr and exit with nonzero status. directory. --show-toplevel:: - Show the absolute path of the top-level directory. + Show the absolute path of the top-level directory of the working + tree. If there is no working tree, report an error. --show-superproject-working-tree:: Show the absolute path of the root of the superproject's @@ -274,6 +275,13 @@ print a message to stderr and exit with nonzero status. Show the path to the shared index file in split index mode, or empty if not in split-index mode. +--show-object-format[=(storage|input|output)]:: + Show the object format (hash algorithm) used for the repository + for storage inside the `.git` directory, input, or output. For + input, multiple algorithms may be printed, space-separated. + If not specified, the default is "storage". + + Other Options ~~~~~~~~~~~~~ diff --git a/Documentation/git-shortlog.txt b/Documentation/git-shortlog.txt index bc80905a8a..a72ea7f7ba 100644 --- a/Documentation/git-shortlog.txt +++ b/Documentation/git-shortlog.txt @@ -76,6 +76,9 @@ them. Paths may need to be prefixed with `--` to separate them from options or the revision range, when confusion arises. +:git-shortlog: 1 +include::rev-list-options.txt[] + MAPPING AUTHORS --------------- diff --git a/Documentation/git-sparse-checkout.txt b/Documentation/git-sparse-checkout.txt new file mode 100644 index 0000000000..9c3c66cc37 --- /dev/null +++ b/Documentation/git-sparse-checkout.txt @@ -0,0 +1,166 @@ +git-sparse-checkout(1) +====================== + +NAME +---- +git-sparse-checkout - Initialize and modify the sparse-checkout +configuration, which reduces the checkout to a set of paths +given by a list of atterns. + + +SYNOPSIS +-------- +[verse] +'git sparse-checkout <subcommand> [options]' + + +DESCRIPTION +----------- + +Initialize and modify the sparse-checkout configuration, which reduces +the checkout to a set of paths given by a list of patterns. + +THIS COMMAND IS EXPERIMENTAL. ITS BEHAVIOR, AND THE BEHAVIOR OF OTHER +COMMANDS IN THE PRESENCE OF SPARSE-CHECKOUTS, WILL LIKELY CHANGE IN +THE FUTURE. + + +COMMANDS +-------- +'list':: + Provide a list of the contents in the sparse-checkout file. + +'init':: + Enable the `core.sparseCheckout` setting. If the + sparse-checkout file does not exist, then populate it with + patterns that match every file in the root directory and + no other directories, then will remove all directories tracked + by Git. Add patterns to the sparse-checkout file to + repopulate the working directory. ++ +To avoid interfering with other worktrees, it first enables the +`extensions.worktreeConfig` setting and makes sure to set the +`core.sparseCheckout` setting in the worktree-specific config file. + +'set':: + Write a set of patterns to the sparse-checkout file, as given as + a list of arguments following the 'set' subcommand. Update the + working directory to match the new patterns. Enable the + core.sparseCheckout config setting if it is not already enabled. ++ +When the `--stdin` option is provided, the patterns are read from +standard in as a newline-delimited list instead of from the arguments. + +'disable':: + Disable the `core.sparseCheckout` config setting, and restore the + working directory to include all files. Leaves the sparse-checkout + file intact so a later 'git sparse-checkout init' command may + return the working directory to the same state. + +SPARSE CHECKOUT +--------------- + +"Sparse checkout" allows populating the working directory sparsely. +It uses the skip-worktree bit (see linkgit:git-update-index[1]) to tell +Git whether a file in the working directory is worth looking at. If +the skip-worktree bit is set, then the file is ignored in the working +directory. Git will not populate the contents of those files, which +makes a sparse checkout helpful when working in a repository with many +files, but only a few are important to the current user. + +The `$GIT_DIR/info/sparse-checkout` file is used to define the +skip-worktree reference bitmap. When Git updates the working +directory, it updates the skip-worktree bits in the index based +on this file. The files matching the patterns in the file will +appear in the working directory, and the rest will not. + +To enable the sparse-checkout feature, run `git sparse-checkout init` to +initialize a simple sparse-checkout file and enable the `core.sparseCheckout` +config setting. Then, run `git sparse-checkout set` to modify the patterns in +the sparse-checkout file. + +To repopulate the working directory with all files, use the +`git sparse-checkout disable` command. + + +FULL PATTERN SET +---------------- + +By default, the sparse-checkout file uses the same syntax as `.gitignore` +files. + +While `$GIT_DIR/info/sparse-checkout` is usually used to specify what +files are included, you can also specify what files are _not_ included, +using negative patterns. For example, to remove the file `unwanted`: + +---------------- +/* +!unwanted +---------------- + + +CONE PATTERN SET +---------------- + +The full pattern set allows for arbitrary pattern matches and complicated +inclusion/exclusion rules. These can result in O(N*M) pattern matches when +updating the index, where N is the number of patterns and M is the number +of paths in the index. To combat this performance issue, a more restricted +pattern set is allowed when `core.spareCheckoutCone` is enabled. + +The accepted patterns in the cone pattern set are: + +1. *Recursive:* All paths inside a directory are included. + +2. *Parent:* All files immediately inside a directory are included. + +In addition to the above two patterns, we also expect that all files in the +root directory are included. If a recursive pattern is added, then all +leading directories are added as parent patterns. + +By default, when running `git sparse-checkout init`, the root directory is +added as a parent pattern. At this point, the sparse-checkout file contains +the following patterns: + +---------------- +/* +!/*/ +---------------- + +This says "include everything in root, but nothing two levels below root." +If we then add the folder `A/B/C` as a recursive pattern, the folders `A` and +`A/B` are added as parent patterns. The resulting sparse-checkout file is +now + +---------------- +/* +!/*/ +/A/ +!/A/*/ +/A/B/ +!/A/B/*/ +/A/B/C/ +---------------- + +Here, order matters, so the negative patterns are overridden by the positive +patterns that appear lower in the file. + +If `core.sparseCheckoutCone=true`, then Git will parse the sparse-checkout file +expecting patterns of these types. Git will warn if the patterns do not match. +If the patterns do match the expected format, then Git will use faster hash- +based algorithms to compute inclusion in the sparse-checkout. + +If `core.ignoreCase=true`, then the pattern-matching algorithm will use a +case-insensitive check. This corrects for case mismatched filenames in the +'git sparse-checkout set' command to reflect the expected cone in the working +directory. + +SEE ALSO +-------- + +linkgit:git-read-tree[1] +linkgit:gitignore[5] + +GIT +--- +Part of the linkgit:git[1] suite diff --git a/Documentation/git-submodule.txt b/Documentation/git-submodule.txt index 1f46380af2..22425cbc76 100644 --- a/Documentation/git-submodule.txt +++ b/Documentation/git-submodule.txt @@ -16,6 +16,7 @@ SYNOPSIS 'git submodule' [--quiet] deinit [-f|--force] (--all|[--] <path>...) 'git submodule' [--quiet] update [<options>] [--] [<path>...] 'git submodule' [--quiet] set-branch [<options>] [--] <path> +'git submodule' [--quiet] set-url [--] <path> <newurl> 'git submodule' [--quiet] summary [<options>] [--] [<path>...] 'git submodule' [--quiet] foreach [--recursive] <command> 'git submodule' [--quiet] sync [--recursive] [--] [<path>...] @@ -80,6 +81,9 @@ status [--cached] [--recursive] [--] [<path>...]:: does not match the SHA-1 found in the index of the containing repository and `U` if the submodule has merge conflicts. + +If `--cached` is specified, this command will instead print the SHA-1 +recorded in the superproject for each submodule. ++ If `--recursive` is specified, this command will recurse into nested submodules, and show their status as well. + @@ -133,7 +137,8 @@ update [--init] [--remote] [-N|--no-fetch] [--[no-]recommend-shallow] [-f|--forc + -- Update the registered submodules to match what the superproject -expects by cloning missing submodules and updating the working tree of +expects by cloning missing submodules, fetching missing commits +in submodules and updating the working tree of the submodules. The "updating" can be done in several ways depending on command line options and the value of `submodule.<name>.update` configuration variable. The command line option takes precedence over @@ -180,6 +185,11 @@ set-branch (-d|--default) [--] <path>:: `--default` option removes the submodule.<name>.branch configuration key, which causes the tracking branch to default to 'master'. +set-url [--] <path> <newurl>:: + Sets the URL of the specified submodule to <newurl>. Then, it will + automatically synchronize the submodule's new remote URL + configuration. + summary [--cached|--files] [(-n|--summary-limit) <n>] [commit] [--] [<path>...]:: Show commit summary between the given commit (defaults to HEAD) and working tree/index. For a submodule in question, a series of commits diff --git a/Documentation/git-svn.txt b/Documentation/git-svn.txt index 53774f5b64..6624a14fbd 100644 --- a/Documentation/git-svn.txt +++ b/Documentation/git-svn.txt @@ -677,7 +677,8 @@ config key: svn.authorsProg -s<strategy>:: --strategy=<strategy>:: -p:: ---preserve-merges:: +--rebase-merges:: +--preserve-merges (DEPRECATED):: These are only used with the 'dcommit' and 'rebase' commands. + Passed directly to 'git rebase' when using 'dcommit' if a diff --git a/Documentation/git-tag.txt b/Documentation/git-tag.txt index 2e5599a67f..f6d9791780 100644 --- a/Documentation/git-tag.txt +++ b/Documentation/git-tag.txt @@ -65,7 +65,7 @@ OPTIONS --sign:: Make a GPG-signed tag, using the default e-mail address's key. The default behavior of tag GPG-signing is controlled by `tag.gpgSign` - configuration variable if it exists, or disabled oder otherwise. + configuration variable if it exists, or disabled otherwise. See linkgit:git-config[1]. --no-sign:: diff --git a/Documentation/git-update-index.txt b/Documentation/git-update-index.txt index 1c4d146a41..c7a6271daf 100644 --- a/Documentation/git-update-index.txt +++ b/Documentation/git-update-index.txt @@ -16,6 +16,7 @@ SYNOPSIS [--chmod=(+|-)x] [--[no-]assume-unchanged] [--[no-]skip-worktree] + [--[no-]ignore-skip-worktree-entries] [--[no-]fsmonitor-valid] [--ignore-submodules] [--[no-]split-index] @@ -113,6 +114,11 @@ you will need to handle the situation manually. set and unset the "skip-worktree" bit for the paths. See section "Skip-worktree bit" below for more information. + +--[no-]ignore-skip-worktree-entries:: + Do not remove skip-worktree (AKA "index-only") entries even when + the `--remove` option was specified. + --[no-]fsmonitor-valid:: When one of these flags is specified, the object name recorded for the paths are not updated. Instead, these options @@ -426,7 +432,7 @@ specified by the splitIndex.sharedIndexExpire config variable (see linkgit:git-config[1]). To avoid deleting a shared index file that is still used, its -modification time is updated to the current time everytime a new split +modification time is updated to the current time every time a new split index based on the shared index file is either created or read from. UNTRACKED CACHE diff --git a/Documentation/git.txt b/Documentation/git.txt index 9b82564d1a..b1597ac002 100644 --- a/Documentation/git.txt +++ b/Documentation/git.txt @@ -271,8 +271,8 @@ In general, the interrogate commands do not touch the files in the working tree. -Synching repositories -~~~~~~~~~~~~~~~~~~~~~ +Syncing repositories +~~~~~~~~~~~~~~~~~~~~ include::cmds-synchingrepositories.txt[] @@ -544,6 +544,10 @@ other a pager. See also the `core.pager` option in linkgit:git-config[1]. +`GIT_PROGRESS_DELAY`:: + A number controlling how many seconds to delay before showing + optional progress indicators. Defaults to 2. + `GIT_EDITOR`:: This environment variable overrides `$EDITOR` and `$VISUAL`. It is used by several Git commands when, on interactive mode, @@ -928,7 +932,7 @@ Reporting Bugs Report bugs to the Git mailing list <git@vger.kernel.org> where the development and maintenance is primarily done. You do not have to be subscribed to the list to send a message there. See the list archive -at https://public-inbox.org/git for previous bug reports and other +at https://lore.kernel.org/git for previous bug reports and other discussions. Issues which are security relevant should be disclosed privately to diff --git a/Documentation/gitattributes.txt b/Documentation/gitattributes.txt index c5a528c667..508fe713c4 100644 --- a/Documentation/gitattributes.txt +++ b/Documentation/gitattributes.txt @@ -293,10 +293,10 @@ web front ends do not visualize the contents of these files by default. In these cases you can tell Git the encoding of a file in the working directory with the `working-tree-encoding` attribute. If a file with this -attribute is added to Git, then Git reencodes the content from the +attribute is added to Git, then Git re-encodes the content from the specified encoding to UTF-8. Finally, Git stores the UTF-8 encoded content in its internal data structure (called "the index"). On checkout -the content is reencoded back to the specified encoding. +the content is re-encoded back to the specified encoding. Please note that using the `working-tree-encoding` attribute may have a number of pitfalls: @@ -498,7 +498,7 @@ command. This is achieved by using the long-running process protocol When Git encounters the first file that needs to be cleaned or smudged, it starts the filter and performs the handshake. In the handshake, the welcome message sent by Git is "git-filter-client", only version 2 is -suppported, and the supported capabilities are "clean", "smudge", and +supported, and the supported capabilities are "clean", "smudge", and "delay". Afterwards Git sends a list of "key=value" pairs terminated with @@ -812,6 +812,8 @@ patterns are available: - `dts` suitable for devicetree (DTS) files. +- `elixir` suitable for source code in the Elixir language. + - `fortran` suitable for source code in the Fortran language. - `fountain` suitable for Fountain documents. diff --git a/Documentation/gitcli.txt b/Documentation/gitcli.txt index 4b32876b6e..373cfa2264 100644 --- a/Documentation/gitcli.txt +++ b/Documentation/gitcli.txt @@ -211,8 +211,8 @@ only affects the files in the working tree, but with entries, and with `--cached`, it modifies only the index entries. -See also http://marc.info/?l=git&m=116563135620359 and -http://marc.info/?l=git&m=119150393620273 for further +See also https://lore.kernel.org/git/7v64clg5u9.fsf@assigned-by-dhcp.cox.net/ and +https://lore.kernel.org/git/7vy7ej9g38.fsf@gitster.siamese.dyndns.org/ for further information. Some other commands that also work on files in the working tree and/or diff --git a/Documentation/gitcredentials.txt b/Documentation/gitcredentials.txt index adc759612d..ea759fdee5 100644 --- a/Documentation/gitcredentials.txt +++ b/Documentation/gitcredentials.txt @@ -186,8 +186,7 @@ CUSTOM HELPERS -------------- You can write your own custom helpers to interface with any system in -which you keep credentials. See the documentation for Git's -link:technical/api-credentials.html[credentials API] for details. +which you keep credentials. See credential.h for details. GIT --- diff --git a/Documentation/gitmodules.txt b/Documentation/gitmodules.txt index ba9ec5b405..67275fd187 100644 --- a/Documentation/gitmodules.txt +++ b/Documentation/gitmodules.txt @@ -80,7 +80,7 @@ submodule.<name>.ignore:: Committed differences and modifications to tracked files will show up. - none;; No modifiations to submodules are ignored, all of committed + none;; No modifications to submodules are ignored, all of committed differences, and modifications to tracked and untracked files are shown. This is the default option. @@ -120,7 +120,7 @@ submodules a URL is specified which can be used for cloning the submodules. SEE ALSO -------- -linkgit:git-submodule[1] linkgit:git-config[1] +linkgit:git-submodule[1], linkgit:gitsubmodules[7], linkgit:git-config[1] GIT --- diff --git a/Documentation/gitrepository-layout.txt b/Documentation/gitrepository-layout.txt index d6388f10bb..1a2ef4c150 100644 --- a/Documentation/gitrepository-layout.txt +++ b/Documentation/gitrepository-layout.txt @@ -96,9 +96,9 @@ refs:: directory. The 'git prune' command knows to preserve objects reachable from refs found in this directory and its subdirectories. - This directory is ignored (except refs/bisect and - refs/worktree) if $GIT_COMMON_DIR is set and - "$GIT_COMMON_DIR/refs" will be used instead. + This directory is ignored (except refs/bisect, + refs/rewritten and refs/worktree) if $GIT_COMMON_DIR is + set and "$GIT_COMMON_DIR/refs" will be used instead. refs/heads/`name`:: records tip-of-the-tree commit objects of branch `name` @@ -240,8 +240,8 @@ remotes:: logs:: Records of changes made to refs are stored in this directory. See linkgit:git-update-ref[1] for more information. This - directory is ignored if $GIT_COMMON_DIR is set and - "$GIT_COMMON_DIR/logs" will be used instead. + directory is ignored (except logs/HEAD) if $GIT_COMMON_DIR is + set and "$GIT_COMMON_DIR/logs" will be used instead. logs/refs/heads/`name`:: Records all changes made to the branch tip named `name`. diff --git a/Documentation/gitsubmodules.txt b/Documentation/gitsubmodules.txt index 0a890205b8..c476f891b5 100644 --- a/Documentation/gitsubmodules.txt +++ b/Documentation/gitsubmodules.txt @@ -3,7 +3,7 @@ gitsubmodules(7) NAME ---- -gitsubmodules - mounting one repository inside another +gitsubmodules - Mounting one repository inside another SYNOPSIS -------- diff --git a/Documentation/howto/separating-topic-branches.txt b/Documentation/howto/separating-topic-branches.txt index bd1027433b..81be0d6115 100644 --- a/Documentation/howto/separating-topic-branches.txt +++ b/Documentation/howto/separating-topic-branches.txt @@ -81,7 +81,7 @@ After I am done, I'd try a pretend-merge between "topicA" and o---o---o---o---o---o The last diff better not to show anything other than cleanups -for crufts. Then I can finally clean things up: +for cruft. Then I can finally clean things up: $ git branch -D topic $ git reset --hard HEAD^ ;# nuke pretend merge diff --git a/Documentation/merge-options.txt b/Documentation/merge-options.txt index 59b8ff1e51..40dc4f5e8c 100644 --- a/Documentation/merge-options.txt +++ b/Documentation/merge-options.txt @@ -34,7 +34,7 @@ set to `no` at the beginning of them. --cleanup=<mode>:: This option determines how the merge message will be cleaned up before - commiting. See linkgit:git-commit[1] for more details. In addition, if + committing. See linkgit:git-commit[1] for more details. In addition, if the '<mode>' is given a value of `scissors`, scissors will be appended to `MERGE_MSG` before being passed on to the commit machinery in the case of a merge conflict. diff --git a/Documentation/merge-strategies.txt b/Documentation/merge-strategies.txt index aa66cbe41e..2912de706b 100644 --- a/Documentation/merge-strategies.txt +++ b/Documentation/merge-strategies.txt @@ -32,7 +32,7 @@ The 'recursive' strategy can take the following options: ours;; This option forces conflicting hunks to be auto-resolved cleanly by favoring 'our' version. Changes from the other tree that do not - conflict with our side are reflected to the merge result. + conflict with our side are reflected in the merge result. For a binary file, the entire contents are taken from our side. + This should not be confused with the 'ours' merge strategy, which does not diff --git a/Documentation/pretty-formats.txt b/Documentation/pretty-formats.txt index b87e2e83e6..1a7212ce5a 100644 --- a/Documentation/pretty-formats.txt +++ b/Documentation/pretty-formats.txt @@ -4,7 +4,7 @@ PRETTY FORMATS If the commit is a merge, and if the pretty-format is not 'oneline', 'email' or 'raw', an additional line is inserted before the 'Author:' line. This line begins with -"Merge: " and the sha1s of ancestral commits are printed, +"Merge: " and the hashes of ancestral commits are printed, separated by spaces. Note that the listed commits may not necessarily be the list of the *direct* parent commits if you have limited your view of history: for example, if you are @@ -20,20 +20,20 @@ built-in formats: * 'oneline' - <sha1> <title line> + <hash> <title line> + This is designed to be as compact as possible. * 'short' - commit <sha1> + commit <hash> Author: <author> <title line> * 'medium' - commit <sha1> + commit <hash> Author: <author> Date: <author date> @@ -43,7 +43,7 @@ This is designed to be as compact as possible. * 'full' - commit <sha1> + commit <hash> Author: <author> Commit: <committer> @@ -53,7 +53,7 @@ This is designed to be as compact as possible. * 'fuller' - commit <sha1> + commit <hash> Author: <author> AuthorDate: <author date> Commit: <committer> @@ -63,9 +63,20 @@ This is designed to be as compact as possible. <full commit message> +* 'reference' + + <abbrev hash> (<title line>, <short author date>) ++ +This format is used to refer to another commit in a commit message and +is the same as `--pretty='format:%C(auto)%h (%s, %ad)'`. By default, +the date is formatted with `--date=short` unless another `--date` option +is explicitly specified. As with any `format:` with format +placeholders, its output is not affected by other options like +`--decorate` and `--walk-reflogs`. + * 'email' - From <sha1> <date> + From <hash> <date> From: <author> Date: <author date> Subject: [PATCH] <title line> @@ -75,7 +86,7 @@ This is designed to be as compact as possible. * 'raw' + The 'raw' format shows the entire commit exactly as -stored in the commit object. Notably, the SHA-1s are +stored in the commit object. Notably, the hashes are displayed in full, regardless of whether --abbrev or --no-abbrev are used, and 'parents' information show the true parent commits, without taking grafts or history @@ -163,24 +174,32 @@ The placeholders are: '%ae':: author email '%aE':: author email (respecting .mailmap, see linkgit:git-shortlog[1] or linkgit:git-blame[1]) +'%al':: author email local-part (the part before the '@' sign) +'%aL':: author local-part (see '%al') respecting .mailmap, see + linkgit:git-shortlog[1] or linkgit:git-blame[1]) '%ad':: author date (format respects --date= option) '%aD':: author date, RFC2822 style '%ar':: author date, relative '%at':: author date, UNIX timestamp '%ai':: author date, ISO 8601-like format '%aI':: author date, strict ISO 8601 format +'%as':: author date, short format (`YYYY-MM-DD`) '%cn':: committer name '%cN':: committer name (respecting .mailmap, see linkgit:git-shortlog[1] or linkgit:git-blame[1]) '%ce':: committer email '%cE':: committer email (respecting .mailmap, see linkgit:git-shortlog[1] or linkgit:git-blame[1]) +'%cl':: author email local-part (the part before the '@' sign) +'%cL':: author local-part (see '%cl') respecting .mailmap, see + linkgit:git-shortlog[1] or linkgit:git-blame[1]) '%cd':: committer date (format respects --date= option) '%cD':: committer date, RFC2822 style '%cr':: committer date, relative '%ct':: committer date, UNIX timestamp '%ci':: committer date, ISO 8601-like format '%cI':: committer date, strict ISO 8601 format +'%cs':: committer date, short format (`YYYY-MM-DD`) '%d':: ref names, like the --decorate option of linkgit:git-log[1] '%D':: ref names without the " (", ")" wrapping. '%S':: ref name given on the command line by which the commit was reached diff --git a/Documentation/pretty-options.txt b/Documentation/pretty-options.txt index e44fc8f738..7a6da6db78 100644 --- a/Documentation/pretty-options.txt +++ b/Documentation/pretty-options.txt @@ -3,7 +3,7 @@ Pretty-print the contents of the commit logs in a given format, where '<format>' can be one of 'oneline', 'short', 'medium', - 'full', 'fuller', 'email', 'raw', 'format:<string>' + 'full', 'fuller', 'reference', 'email', 'raw', 'format:<string>' and 'tformat:<string>'. When '<format>' is none of the above, and has '%placeholder' in it, it acts as if '--pretty=tformat:<format>' were given. @@ -57,7 +57,7 @@ message by 4 spaces (i.e. 'medium', which is the default, 'full', and 'fuller'). ifndef::git-rev-list[] ---notes[=<treeish>]:: +--notes[=<ref>]:: Show the notes (see linkgit:git-notes[1]) that annotate the commit, when showing the commit log message. This is the default for `git log`, `git show` and `git whatchanged` commands when @@ -68,8 +68,8 @@ By default, the notes shown are from the notes refs listed in the `core.notesRef` and `notes.displayRef` variables (or corresponding environment overrides). See linkgit:git-config[1] for more details. + -With an optional '<treeish>' argument, use the treeish to find the notes -to display. The treeish can specify the full refname when it begins +With an optional '<ref>' argument, use the ref to find the notes +to display. The ref can specify the full refname when it begins with `refs/notes/`; when it begins with `notes/`, `refs/` and otherwise `refs/notes/` is prefixed to form a full name of the ref. + @@ -85,7 +85,7 @@ being displayed. Examples: "--notes=foo" will show only notes from "--notes --notes=foo --no-notes --notes=bar" will only show notes from "refs/notes/bar". ---show-notes[=<treeish>]:: +--show-notes[=<ref>]:: --[no-]standard-notes:: These options are deprecated. Use the above --notes/--no-notes options instead. diff --git a/Documentation/rev-list-options.txt b/Documentation/rev-list-options.txt index 90ff9e2bea..bfd02ade99 100644 --- a/Documentation/rev-list-options.txt +++ b/Documentation/rev-list-options.txt @@ -58,7 +58,7 @@ endif::git-rev-list[] `--all-match`). ifndef::git-rev-list[] + -When `--show-notes` is in effect, the message from the notes is +When `--notes` is in effect, the message from the notes is matched as if it were part of the log message. endif::git-rev-list[] @@ -269,7 +269,7 @@ list. exclude (that is, '{caret}commit', 'commit1..commit2', and 'commit1\...commit2' notations cannot be used). + -With `--pretty` format other than `oneline` (for obvious reasons), +With `--pretty` format other than `oneline` and `reference` (for obvious reasons), this causes the output to have two extra lines of information taken from the reflog. The reflog designator in the output may be shown as `ref@{Nth}` (where `Nth` is the reverse-chronological index in the @@ -293,6 +293,8 @@ Under `--pretty=oneline`, the commit message is prefixed with this information on the same line. This option cannot be combined with `--reverse`. See also linkgit:git-reflog[1]. ++ +Under `--pretty=reference`, this information will not be shown at all. --merge:: After a failed merge, show refs that touch files having a @@ -579,6 +581,7 @@ above) if (1) they are referenced by tags, or (2) they change the contents of the paths given on the command line. All other commits are marked as TREESAME (subject to be simplified away). +ifndef::git-shortlog[] ifdef::git-rev-list[] Bisection Helpers ~~~~~~~~~~~~~~~~~ @@ -634,8 +637,9 @@ This option can be used along with `--bisect-vars`, in this case, after all the sorted commit objects, there will be the same text as if `--bisect-vars` had been used alone. endif::git-rev-list[] +endif::git-shortlog[] - +ifndef::git-shortlog[] Commit Ordering ~~~~~~~~~~~~~~~ @@ -677,7 +681,9 @@ together. Output the commits chosen to be shown (see Commit Limiting section above) in reverse order. Cannot be combined with `--walk-reflogs`. +endif::git-shortlog[] +ifndef::git-shortlog[] Object Traversal ~~~~~~~~~~~~~~~~ @@ -817,7 +823,9 @@ endif::git-rev-list[] --do-walk:: Overrides a previous `--no-walk`. +endif::git-shortlog[] +ifndef::git-shortlog[] Commit Formatting ~~~~~~~~~~~~~~~~~ @@ -973,7 +981,9 @@ ifdef::git-rev-list[] counts and print the count for equivalent commits separated by a tab. endif::git-rev-list[] +endif::git-shortlog[] +ifndef::git-shortlog[] ifndef::git-rev-list[] Diff Formatting ~~~~~~~~~~~~~~~ @@ -1016,3 +1026,4 @@ options may be given. See linkgit:git-diff-files[1] for more options. -t:: Show the tree objects in the diff output. This implies `-r`. endif::git-rev-list[] +endif::git-shortlog[] diff --git a/Documentation/technical/api-allocation-growing.txt b/Documentation/technical/api-allocation-growing.txt deleted file mode 100644 index 5a59b54844..0000000000 --- a/Documentation/technical/api-allocation-growing.txt +++ /dev/null @@ -1,39 +0,0 @@ -allocation growing API -====================== - -Dynamically growing an array using realloc() is error prone and boring. - -Define your array with: - -* a pointer (`item`) that points at the array, initialized to `NULL` - (although please name the variable based on its contents, not on its - type); - -* an integer variable (`alloc`) that keeps track of how big the current - allocation is, initialized to `0`; - -* another integer variable (`nr`) to keep track of how many elements the - array currently has, initialized to `0`. - -Then before adding `n`th element to the item, call `ALLOC_GROW(item, n, -alloc)`. This ensures that the array can hold at least `n` elements by -calling `realloc(3)` and adjusting `alloc` variable. - ------------- -sometype *item; -size_t nr; -size_t alloc - -for (i = 0; i < nr; i++) - if (we like item[i] already) - return; - -/* we did not like any existing one, so add one */ -ALLOC_GROW(item, nr + 1, alloc); -item[nr++] = value you like; ------------- - -You are responsible for updating the `nr` variable. - -If you need to specify the number of elements to allocate explicitly -then use the macro `REALLOC_ARRAY(item, alloc)` instead of `ALLOC_GROW`. diff --git a/Documentation/technical/api-argv-array.txt b/Documentation/technical/api-argv-array.txt deleted file mode 100644 index 870c8edbfb..0000000000 --- a/Documentation/technical/api-argv-array.txt +++ /dev/null @@ -1,65 +0,0 @@ -argv-array API -============== - -The argv-array API allows one to dynamically build and store -NULL-terminated lists. An argv-array maintains the invariant that the -`argv` member always points to a non-NULL array, and that the array is -always NULL-terminated at the element pointed to by `argv[argc]`. This -makes the result suitable for passing to functions expecting to receive -argv from main(), or the link:api-run-command.html[run-command API]. - -The string-list API (documented in string-list.h) is similar, but cannot be -used for these purposes; instead of storing a straight string pointer, -it contains an item structure with a `util` field that is not compatible -with the traditional argv interface. - -Each `argv_array` manages its own memory. Any strings pushed into the -array are duplicated, and all memory is freed by argv_array_clear(). - -Data Structures ---------------- - -`struct argv_array`:: - - A single array. This should be initialized by assignment from - `ARGV_ARRAY_INIT`, or by calling `argv_array_init`. The `argv` - member contains the actual array; the `argc` member contains the - number of elements in the array, not including the terminating - NULL. - -Functions ---------- - -`argv_array_init`:: - Initialize an array. This is no different than assigning from - `ARGV_ARRAY_INIT`. - -`argv_array_push`:: - Push a copy of a string onto the end of the array. - -`argv_array_pushl`:: - Push a list of strings onto the end of the array. The arguments - should be a list of `const char *` strings, terminated by a NULL - argument. - -`argv_array_pushf`:: - Format a string and push it onto the end of the array. This is a - convenience wrapper combining `strbuf_addf` and `argv_array_push`. - -`argv_array_pushv`:: - Push a null-terminated array of strings onto the end of the array. - -`argv_array_pop`:: - Remove the final element from the array. If there are no - elements in the array, do nothing. - -`argv_array_clear`:: - Free all memory associated with the array and return it to the - initial, empty state. - -`argv_array_detach`:: - Disconnect the `argv` member from the `argv_array` struct and - return it. The caller is responsible for freeing the memory used - by the array, and by the strings it references. After detaching, - the `argv_array` is in a reinitialized state and can be pushed - into again. diff --git a/Documentation/technical/api-config.txt b/Documentation/technical/api-config.txt deleted file mode 100644 index 7d20716c32..0000000000 --- a/Documentation/technical/api-config.txt +++ /dev/null @@ -1,319 +0,0 @@ -config API -========== - -The config API gives callers a way to access Git configuration files -(and files which have the same syntax). See linkgit:git-config[1] for a -discussion of the config file syntax. - -General Usage -------------- - -Config files are parsed linearly, and each variable found is passed to a -caller-provided callback function. The callback function is responsible -for any actions to be taken on the config option, and is free to ignore -some options. It is not uncommon for the configuration to be parsed -several times during the run of a Git program, with different callbacks -picking out different variables useful to themselves. - -A config callback function takes three parameters: - -- the name of the parsed variable. This is in canonical "flat" form: the - section, subsection, and variable segments will be separated by dots, - and the section and variable segments will be all lowercase. E.g., - `core.ignorecase`, `diff.SomeType.textconv`. - -- the value of the found variable, as a string. If the variable had no - value specified, the value will be NULL (typically this means it - should be interpreted as boolean true). - -- a void pointer passed in by the caller of the config API; this can - contain callback-specific data - -A config callback should return 0 for success, or -1 if the variable -could not be parsed properly. - -Basic Config Querying ---------------------- - -Most programs will simply want to look up variables in all config files -that Git knows about, using the normal precedence rules. To do this, -call `git_config` with a callback function and void data pointer. - -`git_config` will read all config sources in order of increasing -priority. Thus a callback should typically overwrite previously-seen -entries with new ones (e.g., if both the user-wide `~/.gitconfig` and -repo-specific `.git/config` contain `color.ui`, the config machinery -will first feed the user-wide one to the callback, and then the -repo-specific one; by overwriting, the higher-priority repo-specific -value is left at the end). - -The `config_with_options` function lets the caller examine config -while adjusting some of the default behavior of `git_config`. It should -almost never be used by "regular" Git code that is looking up -configuration variables. It is intended for advanced callers like -`git-config`, which are intentionally tweaking the normal config-lookup -process. It takes two extra parameters: - -`config_source`:: -If this parameter is non-NULL, it specifies the source to parse for -configuration, rather than looking in the usual files. See `struct -git_config_source` in `config.h` for details. Regular `git_config` defaults -to `NULL`. - -`opts`:: -Specify options to adjust the behavior of parsing config files. See `struct -config_options` in `config.h` for details. As an example: regular `git_config` -sets `opts.respect_includes` to `1` by default. - -Reading Specific Files ----------------------- - -To read a specific file in git-config format, use -`git_config_from_file`. This takes the same callback and data parameters -as `git_config`. - -Querying For Specific Variables -------------------------------- - -For programs wanting to query for specific variables in a non-callback -manner, the config API provides two functions `git_config_get_value` -and `git_config_get_value_multi`. They both read values from an internal -cache generated previously from reading the config files. - -`int git_config_get_value(const char *key, const char **value)`:: - - Finds the highest-priority value for the configuration variable `key`, - stores the pointer to it in `value` and returns 0. When the - configuration variable `key` is not found, returns 1 without touching - `value`. The caller should not free or modify `value`, as it is owned - by the cache. - -`const struct string_list *git_config_get_value_multi(const char *key)`:: - - Finds and returns the value list, sorted in order of increasing priority - for the configuration variable `key`. When the configuration variable - `key` is not found, returns NULL. The caller should not free or modify - the returned pointer, as it is owned by the cache. - -`void git_config_clear(void)`:: - - Resets and invalidates the config cache. - -The config API also provides type specific API functions which do conversion -as well as retrieval for the queried variable, including: - -`int git_config_get_int(const char *key, int *dest)`:: - - Finds and parses the value to an integer for the configuration variable - `key`. Dies on error; otherwise, stores the value of the parsed integer in - `dest` and returns 0. When the configuration variable `key` is not found, - returns 1 without touching `dest`. - -`int git_config_get_ulong(const char *key, unsigned long *dest)`:: - - Similar to `git_config_get_int` but for unsigned longs. - -`int git_config_get_bool(const char *key, int *dest)`:: - - Finds and parses the value into a boolean value, for the configuration - variable `key` respecting keywords like "true" and "false". Integer - values are converted into true/false values (when they are non-zero or - zero, respectively). Other values cause a die(). If parsing is successful, - stores the value of the parsed result in `dest` and returns 0. When the - configuration variable `key` is not found, returns 1 without touching - `dest`. - -`int git_config_get_bool_or_int(const char *key, int *is_bool, int *dest)`:: - - Similar to `git_config_get_bool`, except that integers are copied as-is, - and `is_bool` flag is unset. - -`int git_config_get_maybe_bool(const char *key, int *dest)`:: - - Similar to `git_config_get_bool`, except that it returns -1 on error - rather than dying. - -`int git_config_get_string_const(const char *key, const char **dest)`:: - - Allocates and copies the retrieved string into the `dest` parameter for - the configuration variable `key`; if NULL string is given, prints an - error message and returns -1. When the configuration variable `key` is - not found, returns 1 without touching `dest`. - -`int git_config_get_string(const char *key, char **dest)`:: - - Similar to `git_config_get_string_const`, except that retrieved value - copied into the `dest` parameter is a mutable string. - -`int git_config_get_pathname(const char *key, const char **dest)`:: - - Similar to `git_config_get_string`, but expands `~` or `~user` into - the user's home directory when found at the beginning of the path. - -`git_die_config(const char *key, const char *err, ...)`:: - - First prints the error message specified by the caller in `err` and then - dies printing the line number and the file name of the highest priority - value for the configuration variable `key`. - -`void git_die_config_linenr(const char *key, const char *filename, int linenr)`:: - - Helper function which formats the die error message according to the - parameters entered. Used by `git_die_config()`. It can be used by callers - handling `git_config_get_value_multi()` to print the correct error message - for the desired value. - -See test-config.c for usage examples. - -Value Parsing Helpers ---------------------- - -To aid in parsing string values, the config API provides callbacks with -a number of helper functions, including: - -`git_config_int`:: -Parse the string to an integer, including unit factors. Dies on error; -otherwise, returns the parsed result. - -`git_config_ulong`:: -Identical to `git_config_int`, but for unsigned longs. - -`git_config_bool`:: -Parse a string into a boolean value, respecting keywords like "true" and -"false". Integer values are converted into true/false values (when they -are non-zero or zero, respectively). Other values cause a die(). If -parsing is successful, the return value is the result. - -`git_config_bool_or_int`:: -Same as `git_config_bool`, except that integers are returned as-is, and -an `is_bool` flag is unset. - -`git_parse_maybe_bool`:: -Same as `git_config_bool`, except that it returns -1 on error rather -than dying. - -`git_config_string`:: -Allocates and copies the value string into the `dest` parameter; if no -string is given, prints an error message and returns -1. - -`git_config_pathname`:: -Similar to `git_config_string`, but expands `~` or `~user` into the -user's home directory when found at the beginning of the path. - -Include Directives ------------------- - -By default, the config parser does not respect include directives. -However, a caller can use the special `git_config_include` wrapper -callback to support them. To do so, you simply wrap your "real" callback -function and data pointer in a `struct config_include_data`, and pass -the wrapper to the regular config-reading functions. For example: - -------------------------------------------- -int read_file_with_include(const char *file, config_fn_t fn, void *data) -{ - struct config_include_data inc = CONFIG_INCLUDE_INIT; - inc.fn = fn; - inc.data = data; - return git_config_from_file(git_config_include, file, &inc); -} -------------------------------------------- - -`git_config` respects includes automatically. The lower-level -`git_config_from_file` does not. - -Custom Configsets ------------------ - -A `config_set` can be used to construct an in-memory cache for -config-like files that the caller specifies (i.e., files like `.gitmodules`, -`~/.gitconfig` etc.). For example, - ----------------------------------------- -struct config_set gm_config; -git_configset_init(&gm_config); -int b; -/* we add config files to the config_set */ -git_configset_add_file(&gm_config, ".gitmodules"); -git_configset_add_file(&gm_config, ".gitmodules_alt"); - -if (!git_configset_get_bool(gm_config, "submodule.frotz.ignore", &b)) { - /* hack hack hack */ -} - -/* when we are done with the configset */ -git_configset_clear(&gm_config); ----------------------------------------- - -Configset API provides functions for the above mentioned work flow, including: - -`void git_configset_init(struct config_set *cs)`:: - - Initializes the config_set `cs`. - -`int git_configset_add_file(struct config_set *cs, const char *filename)`:: - - Parses the file and adds the variable-value pairs to the `config_set`, - dies if there is an error in parsing the file. Returns 0 on success, or - -1 if the file does not exist or is inaccessible. The user has to decide - if he wants to free the incomplete configset or continue using it when - the function returns -1. - -`int git_configset_get_value(struct config_set *cs, const char *key, const char **value)`:: - - Finds the highest-priority value for the configuration variable `key` - and config set `cs`, stores the pointer to it in `value` and returns 0. - When the configuration variable `key` is not found, returns 1 without - touching `value`. The caller should not free or modify `value`, as it - is owned by the cache. - -`const struct string_list *git_configset_get_value_multi(struct config_set *cs, const char *key)`:: - - Finds and returns the value list, sorted in order of increasing priority - for the configuration variable `key` and config set `cs`. When the - configuration variable `key` is not found, returns NULL. The caller - should not free or modify the returned pointer, as it is owned by the cache. - -`void git_configset_clear(struct config_set *cs)`:: - - Clears `config_set` structure, removes all saved variable-value pairs. - -In addition to above functions, the `config_set` API provides type specific -functions in the vein of `git_config_get_int` and family but with an extra -parameter, pointer to struct `config_set`. -They all behave similarly to the `git_config_get*()` family described in -"Querying For Specific Variables" above. - -Writing Config Files --------------------- - -Git gives multiple entry points in the Config API to write config values to -files namely `git_config_set_in_file` and `git_config_set`, which write to -a specific config file or to `.git/config` respectively. They both take a -key/value pair as parameter. -In the end they both call `git_config_set_multivar_in_file` which takes four -parameters: - -- the name of the file, as a string, to which key/value pairs will be written. - -- the name of key, as a string. This is in canonical "flat" form: the section, - subsection, and variable segments will be separated by dots, and the section - and variable segments will be all lowercase. - E.g., `core.ignorecase`, `diff.SomeType.textconv`. - -- the value of the variable, as a string. If value is equal to NULL, it will - remove the matching key from the config file. - -- the value regex, as a string. It will disregard key/value pairs where value - does not match. - -- a multi_replace value, as an int. If value is equal to zero, nothing or only - one matching key/value is replaced, else all matching key/values (regardless - how many) are removed, before the new pair is written. - -It returns 0 on success. - -Also, there are functions `git_config_rename_section` and -`git_config_rename_section_in_file` with parameters `old_name` and `new_name` -for renaming or removing sections in the config files. If NULL is passed -through `new_name` parameter, the section will be removed from the config file. diff --git a/Documentation/technical/api-credentials.txt b/Documentation/technical/api-credentials.txt deleted file mode 100644 index 75368f26ca..0000000000 --- a/Documentation/technical/api-credentials.txt +++ /dev/null @@ -1,271 +0,0 @@ -credentials API -=============== - -The credentials API provides an abstracted way of gathering username and -password credentials from the user (even though credentials in the wider -world can take many forms, in this document the word "credential" always -refers to a username and password pair). - -This document describes two interfaces: the C API that the credential -subsystem provides to the rest of Git, and the protocol that Git uses to -communicate with system-specific "credential helpers". If you are -writing Git code that wants to look up or prompt for credentials, see -the section "C API" below. If you want to write your own helper, see -the section on "Credential Helpers" below. - -Typical setup -------------- - ------------- -+-----------------------+ -| Git code (C) |--- to server requiring ---> -| | authentication -|.......................| -| C credential API |--- prompt ---> User -+-----------------------+ - ^ | - | pipe | - | v -+-----------------------+ -| Git credential helper | -+-----------------------+ ------------- - -The Git code (typically a remote-helper) will call the C API to obtain -credential data like a login/password pair (credential_fill). The -API will itself call a remote helper (e.g. "git credential-cache" or -"git credential-store") that may retrieve credential data from a -store. If the credential helper cannot find the information, the C API -will prompt the user. Then, the caller of the API takes care of -contacting the server, and does the actual authentication. - -C API ------ - -The credential C API is meant to be called by Git code which needs to -acquire or store a credential. It is centered around an object -representing a single credential and provides three basic operations: -fill (acquire credentials by calling helpers and/or prompting the user), -approve (mark a credential as successfully used so that it can be stored -for later use), and reject (mark a credential as unsuccessful so that it -can be erased from any persistent storage). - -Data Structures -~~~~~~~~~~~~~~~ - -`struct credential`:: - - This struct represents a single username/password combination - along with any associated context. All string fields should be - heap-allocated (or NULL if they are not known or not applicable). - The meaning of the individual context fields is the same as - their counterparts in the helper protocol; see the section below - for a description of each field. -+ -The `helpers` member of the struct is a `string_list` of helpers. Each -string specifies an external helper which will be run, in order, to -either acquire or store credentials. See the section on credential -helpers below. This list is filled-in by the API functions -according to the corresponding configuration variables before -consulting helpers, so there usually is no need for a caller to -modify the helpers field at all. -+ -This struct should always be initialized with `CREDENTIAL_INIT` or -`credential_init`. - - -Functions -~~~~~~~~~ - -`credential_init`:: - - Initialize a credential structure, setting all fields to empty. - -`credential_clear`:: - - Free any resources associated with the credential structure, - returning it to a pristine initialized state. - -`credential_fill`:: - - Instruct the credential subsystem to fill the username and - password fields of the passed credential struct by first - consulting helpers, then asking the user. After this function - returns, the username and password fields of the credential are - guaranteed to be non-NULL. If an error occurs, the function will - die(). - -`credential_reject`:: - - Inform the credential subsystem that the provided credentials - have been rejected. This will cause the credential subsystem to - notify any helpers of the rejection (which allows them, for - example, to purge the invalid credentials from storage). It - will also free() the username and password fields of the - credential and set them to NULL (readying the credential for - another call to `credential_fill`). Any errors from helpers are - ignored. - -`credential_approve`:: - - Inform the credential subsystem that the provided credentials - were successfully used for authentication. This will cause the - credential subsystem to notify any helpers of the approval, so - that they may store the result to be used again. Any errors - from helpers are ignored. - -`credential_from_url`:: - - Parse a URL into broken-down credential fields. - -Example -~~~~~~~ - -The example below shows how the functions of the credential API could be -used to login to a fictitious "foo" service on a remote host: - ------------------------------------------------------------------------ -int foo_login(struct foo_connection *f) -{ - int status; - /* - * Create a credential with some context; we don't yet know the - * username or password. - */ - - struct credential c = CREDENTIAL_INIT; - c.protocol = xstrdup("foo"); - c.host = xstrdup(f->hostname); - - /* - * Fill in the username and password fields by contacting - * helpers and/or asking the user. The function will die if it - * fails. - */ - credential_fill(&c); - - /* - * Otherwise, we have a username and password. Try to use it. - */ - status = send_foo_login(f, c.username, c.password); - switch (status) { - case FOO_OK: - /* It worked. Store the credential for later use. */ - credential_accept(&c); - break; - case FOO_BAD_LOGIN: - /* Erase the credential from storage so we don't try it - * again. */ - credential_reject(&c); - break; - default: - /* - * Some other error occurred. We don't know if the - * credential is good or bad, so report nothing to the - * credential subsystem. - */ - } - - /* Free any associated resources. */ - credential_clear(&c); - - return status; -} ------------------------------------------------------------------------ - - -Credential Helpers ------------------- - -Credential helpers are programs executed by Git to fetch or save -credentials from and to long-term storage (where "long-term" is simply -longer than a single Git process; e.g., credentials may be stored -in-memory for a few minutes, or indefinitely on disk). - -Each helper is specified by a single string in the configuration -variable `credential.helper` (and others, see linkgit:git-config[1]). -The string is transformed by Git into a command to be executed using -these rules: - - 1. If the helper string begins with "!", it is considered a shell - snippet, and everything after the "!" becomes the command. - - 2. Otherwise, if the helper string begins with an absolute path, the - verbatim helper string becomes the command. - - 3. Otherwise, the string "git credential-" is prepended to the helper - string, and the result becomes the command. - -The resulting command then has an "operation" argument appended to it -(see below for details), and the result is executed by the shell. - -Here are some example specifications: - ----------------------------------------------------- -# run "git credential-foo" -foo - -# same as above, but pass an argument to the helper -foo --bar=baz - -# the arguments are parsed by the shell, so use shell -# quoting if necessary -foo --bar="whitespace arg" - -# you can also use an absolute path, which will not use the git wrapper -/path/to/my/helper --with-arguments - -# or you can specify your own shell snippet -!f() { echo "password=`cat $HOME/.secret`"; }; f ----------------------------------------------------- - -Generally speaking, rule (3) above is the simplest for users to specify. -Authors of credential helpers should make an effort to assist their -users by naming their program "git-credential-$NAME", and putting it in -the $PATH or $GIT_EXEC_PATH during installation, which will allow a user -to enable it with `git config credential.helper $NAME`. - -When a helper is executed, it will have one "operation" argument -appended to its command line, which is one of: - -`get`:: - - Return a matching credential, if any exists. - -`store`:: - - Store the credential, if applicable to the helper. - -`erase`:: - - Remove a matching credential, if any, from the helper's storage. - -The details of the credential will be provided on the helper's stdin -stream. The exact format is the same as the input/output format of the -`git credential` plumbing command (see the section `INPUT/OUTPUT -FORMAT` in linkgit:git-credential[1] for a detailed specification). - -For a `get` operation, the helper should produce a list of attributes -on stdout in the same format. A helper is free to produce a subset, or -even no values at all if it has nothing useful to provide. Any provided -attributes will overwrite those already known about by Git. If a helper -outputs a `quit` attribute with a value of `true` or `1`, no further -helpers will be consulted, nor will the user be prompted (if no -credential has been provided, the operation will then fail). - -For a `store` or `erase` operation, the helper's output is ignored. -If it fails to perform the requested operation, it may complain to -stderr to inform the user. If it does not support the requested -operation (e.g., a read-only store), it should silently ignore the -request. - -If a helper receives any other operation, it should silently ignore the -request. This leaves room for future operations to be added (older -helpers will just ignore the new requests). - -See also --------- - -linkgit:gitcredentials[7] - -linkgit:git-config[1] (See configuration variables `credential.*`) diff --git a/Documentation/technical/api-diff.txt b/Documentation/technical/api-diff.txt deleted file mode 100644 index 30fc0e9c93..0000000000 --- a/Documentation/technical/api-diff.txt +++ /dev/null @@ -1,174 +0,0 @@ -diff API -======== - -The diff API is for programs that compare two sets of files (e.g. two -trees, one tree and the index) and present the found difference in -various ways. The calling program is responsible for feeding the API -pairs of files, one from the "old" set and the corresponding one from -"new" set, that are different. The library called through this API is -called diffcore, and is responsible for two things. - -* finding total rewrites (`-B`), renames (`-M`) and copies (`-C`), and - changes that touch a string (`-S`), as specified by the caller. - -* outputting the differences in various formats, as specified by the - caller. - -Calling sequence ----------------- - -* Prepare `struct diff_options` to record the set of diff options, and - then call `repo_diff_setup()` to initialize this structure. This - sets up the vanilla default. - -* Fill in the options structure to specify desired output format, rename - detection, etc. `diff_opt_parse()` can be used to parse options given - from the command line in a way consistent with existing git-diff - family of programs. - -* Call `diff_setup_done()`; this inspects the options set up so far for - internal consistency and make necessary tweaking to it (e.g. if - textual patch output was asked, recursive behaviour is turned on); - the callback set_default in diff_options can be used to tweak this more. - -* As you find different pairs of files, call `diff_change()` to feed - modified files, `diff_addremove()` to feed created or deleted files, - or `diff_unmerge()` to feed a file whose state is 'unmerged' to the - API. These are thin wrappers to a lower-level `diff_queue()` function - that is flexible enough to record any of these kinds of changes. - -* Once you finish feeding the pairs of files, call `diffcore_std()`. - This will tell the diffcore library to go ahead and do its work. - -* Calling `diff_flush()` will produce the output. - - -Data structures ---------------- - -* `struct diff_filespec` - -This is the internal representation for a single file (blob). It -records the blob object name (if known -- for a work tree file it -typically is a NUL SHA-1), filemode and pathname. This is what the -`diff_addremove()`, `diff_change()` and `diff_unmerge()` synthesize and -feed `diff_queue()` function with. - -* `struct diff_filepair` - -This records a pair of `struct diff_filespec`; the filespec for a file -in the "old" set (i.e. preimage) is called `one`, and the filespec for a -file in the "new" set (i.e. postimage) is called `two`. A change that -represents file creation has NULL in `one`, and file deletion has NULL -in `two`. - -A `filepair` starts pointing at `one` and `two` that are from the same -filename, but `diffcore_std()` can break pairs and match component -filespecs with other filespecs from a different filepair to form new -filepair. This is called 'rename detection'. - -* `struct diff_queue` - -This is a collection of filepairs. Notable members are: - -`queue`:: - - An array of pointers to `struct diff_filepair`. This - dynamically grows as you add filepairs; - -`alloc`:: - - The allocated size of the `queue` array; - -`nr`:: - - The number of elements in the `queue` array. - - -* `struct diff_options` - -This describes the set of options the calling program wants to affect -the operation of diffcore library with. - -Notable members are: - -`output_format`:: - The output format used when `diff_flush()` is run. - -`context`:: - Number of context lines to generate in patch output. - -`break_opt`, `detect_rename`, `rename-score`, `rename_limit`:: - Affects the way detection logic for complete rewrites, renames - and copies. - -`abbrev`:: - Number of hexdigits to abbreviate raw format output to. - -`pickaxe`:: - A constant string (can and typically does contain newlines to - look for a block of text, not just a single line) to filter out - the filepairs that do not change the number of strings contained - in its preimage and postimage of the diff_queue. - -`flags`:: - This is mostly a collection of boolean options that affects the - operation, but some do not have anything to do with the diffcore - library. - -`touched_flags`:: - Records whether a flag has been changed due to user request - (rather than just set/unset by default). - -`set_default`:: - Callback which allows tweaking the options in diff_setup_done(). - -BINARY, TEXT;; - Affects the way how a file that is seemingly binary is treated. - -FULL_INDEX;; - Tells the patch output format not to use abbreviated object - names on the "index" lines. - -FIND_COPIES_HARDER;; - Tells the diffcore library that the caller is feeding unchanged - filepairs to allow copies from unmodified files be detected. - -COLOR_DIFF;; - Output should be colored. - -COLOR_DIFF_WORDS;; - Output is a colored word-diff. - -NO_INDEX;; - Tells diff-files that the input is not tracked files but files - in random locations on the filesystem. - -ALLOW_EXTERNAL;; - Tells output routine that it is Ok to call user specified patch - output routine. Plumbing disables this to ensure stable output. - -QUIET;; - Do not show any output. - -REVERSE_DIFF;; - Tells the library that the calling program is feeding the - filepairs reversed; `one` is two, and `two` is one. - -EXIT_WITH_STATUS;; - For communication between the calling program and the options - parser; tell the calling program to signal the presence of - difference using program exit code. - -HAS_CHANGES;; - Internal; used for optimization to see if there is any change. - -SILENT_ON_REMOVE;; - Affects if diff-files shows removed files. - -RECURSIVE, TREE_IN_RECURSIVE;; - Tells if tree traversal done by tree-diff should recursively - descend into a tree object pair that are different in preimage - and postimage set. - -(JC) diff --git a/Documentation/technical/api-directory-listing.txt b/Documentation/technical/api-directory-listing.txt deleted file mode 100644 index 76b6e4f71b..0000000000 --- a/Documentation/technical/api-directory-listing.txt +++ /dev/null @@ -1,130 +0,0 @@ -directory listing API -===================== - -The directory listing API is used to enumerate paths in the work tree, -optionally taking `.git/info/exclude` and `.gitignore` files per -directory into account. - -Data structure --------------- - -`struct dir_struct` structure is used to pass directory traversal -options to the library and to record the paths discovered. A single -`struct dir_struct` is used regardless of whether or not the traversal -recursively descends into subdirectories. - -The notable options are: - -`exclude_per_dir`:: - - The name of the file to be read in each directory for excluded - files (typically `.gitignore`). - -`flags`:: - - A bit-field of options: - -`DIR_SHOW_IGNORED`::: - - Return just ignored files in `entries[]`, not untracked - files. This flag is mutually exclusive with - `DIR_SHOW_IGNORED_TOO`. - -`DIR_SHOW_IGNORED_TOO`::: - - Similar to `DIR_SHOW_IGNORED`, but return ignored files in - `ignored[]` in addition to untracked files in - `entries[]`. This flag is mutually exclusive with - `DIR_SHOW_IGNORED`. - -`DIR_KEEP_UNTRACKED_CONTENTS`::: - - Only has meaning if `DIR_SHOW_IGNORED_TOO` is also set; if this is set, the - untracked contents of untracked directories are also returned in - `entries[]`. - -`DIR_SHOW_IGNORED_TOO_MODE_MATCHING`::: - - Only has meaning if `DIR_SHOW_IGNORED_TOO` is also set; if - this is set, returns ignored files and directories that match - an exclude pattern. If a directory matches an exclude pattern, - then the directory is returned and the contained paths are - not. A directory that does not match an exclude pattern will - not be returned even if all of its contents are ignored. In - this case, the contents are returned as individual entries. -+ -If this is set, files and directories that explicitly match an ignore -pattern are reported. Implicitly ignored directories (directories that -do not match an ignore pattern, but whose contents are all ignored) -are not reported, instead all of the contents are reported. - -`DIR_COLLECT_IGNORED`::: - - Special mode for git-add. Return ignored files in `ignored[]` and - untracked files in `entries[]`. Only returns ignored files that match - pathspec exactly (no wildcards). Does not recurse into ignored - directories. - -`DIR_SHOW_OTHER_DIRECTORIES`::: - - Include a directory that is not tracked. - -`DIR_HIDE_EMPTY_DIRECTORIES`::: - - Do not include a directory that is not tracked and is empty. - -`DIR_NO_GITLINKS`::: - - If set, recurse into a directory that looks like a Git - directory. Otherwise it is shown as a directory. - -The result of the enumeration is left in these fields: - -`entries[]`:: - - An array of `struct dir_entry`, each element of which describes - a path. - -`nr`:: - - The number of members in `entries[]` array. - -`alloc`:: - - Internal use; keeps track of allocation of `entries[]` array. - -`ignored[]`:: - - An array of `struct dir_entry`, used for ignored paths with the - `DIR_SHOW_IGNORED_TOO` and `DIR_COLLECT_IGNORED` flags. - -`ignored_nr`:: - - The number of members in `ignored[]` array. - -Calling sequence ----------------- - -Note: index may be looked at for .gitignore files that are CE_SKIP_WORKTREE -marked. If you to exclude files, make sure you have loaded index first. - -* Prepare `struct dir_struct dir` and clear it with `memset(&dir, 0, - sizeof(dir))`. - -* To add single exclude pattern, call `add_pattern_list()` and then - `add_pattern()`. - -* To add patterns from a file (e.g. `.git/info/exclude`), call - `add_patterns_from_file()` , and/or set `dir.exclude_per_dir`. A - short-hand function `setup_standard_excludes()` can be used to set - up the standard set of exclude settings. - -* Set options described in the Data Structure section above. - -* Call `read_directory()`. - -* Use `dir.entries[]`. - -* Call `clear_directory()` when none of the contained elements are no longer in use. - -(JC) diff --git a/Documentation/technical/api-gitattributes.txt b/Documentation/technical/api-gitattributes.txt deleted file mode 100644 index 45f0df600f..0000000000 --- a/Documentation/technical/api-gitattributes.txt +++ /dev/null @@ -1,154 +0,0 @@ -gitattributes API -================= - -gitattributes mechanism gives a uniform way to associate various -attributes to set of paths. - - -Data Structure --------------- - -`struct git_attr`:: - - An attribute is an opaque object that is identified by its name. - Pass the name to `git_attr()` function to obtain the object of - this type. The internal representation of this structure is - of no interest to the calling programs. The name of the - attribute can be retrieved by calling `git_attr_name()`. - -`struct attr_check_item`:: - - This structure represents one attribute and its value. - -`struct attr_check`:: - - This structure represents a collection of `attr_check_item`. - It is passed to `git_check_attr()` function, specifying the - attributes to check, and receives their values. - - -Attribute Values ----------------- - -An attribute for a path can be in one of four states: Set, Unset, -Unspecified or set to a string, and `.value` member of `struct -attr_check_item` records it. There are three macros to check these: - -`ATTR_TRUE()`:: - - Returns true if the attribute is Set for the path. - -`ATTR_FALSE()`:: - - Returns true if the attribute is Unset for the path. - -`ATTR_UNSET()`:: - - Returns true if the attribute is Unspecified for the path. - -If none of the above returns true, `.value` member points at a string -value of the attribute for the path. - - -Querying Specific Attributes ----------------------------- - -* Prepare `struct attr_check` using attr_check_initl() - function, enumerating the names of attributes whose values you are - interested in, terminated with a NULL pointer. Alternatively, an - empty `struct attr_check` can be prepared by calling - `attr_check_alloc()` function and then attributes you want to - ask about can be added to it with `attr_check_append()` - function. - -* Call `git_check_attr()` to check the attributes for the path. - -* Inspect `attr_check` structure to see how each of the - attribute in the array is defined for the path. - - -Example -------- - -To see how attributes "crlf" and "ident" are set for different paths. - -. Prepare a `struct attr_check` with two elements (because - we are checking two attributes): - ------------- -static struct attr_check *check; -static void setup_check(void) -{ - if (check) - return; /* already done */ - check = attr_check_initl("crlf", "ident", NULL); -} ------------- - -. Call `git_check_attr()` with the prepared `struct attr_check`: - ------------- - const char *path; - - setup_check(); - git_check_attr(path, check); ------------- - -. Act on `.value` member of the result, left in `check->items[]`: - ------------- - const char *value = check->items[0].value; - - if (ATTR_TRUE(value)) { - The attribute is Set, by listing only the name of the - attribute in the gitattributes file for the path. - } else if (ATTR_FALSE(value)) { - The attribute is Unset, by listing the name of the - attribute prefixed with a dash - for the path. - } else if (ATTR_UNSET(value)) { - The attribute is neither set nor unset for the path. - } else if (!strcmp(value, "input")) { - If none of ATTR_TRUE(), ATTR_FALSE(), or ATTR_UNSET() is - true, the value is a string set in the gitattributes - file for the path by saying "attr=value". - } else if (... other check using value as string ...) { - ... - } ------------- - -To see how attributes in argv[] are set for different paths, only -the first step in the above would be different. - ------------- -static struct attr_check *check; -static void setup_check(const char **argv) -{ - check = attr_check_alloc(); - while (*argv) { - struct git_attr *attr = git_attr(*argv); - attr_check_append(check, attr); - argv++; - } -} ------------- - - -Querying All Attributes ------------------------ - -To get the values of all attributes associated with a file: - -* Prepare an empty `attr_check` structure by calling - `attr_check_alloc()`. - -* Call `git_all_attrs()`, which populates the `attr_check` - with the attributes attached to the path. - -* Iterate over the `attr_check.items[]` array to examine - the attribute names and values. The name of the attribute - described by an `attr_check.items[]` object can be retrieved via - `git_attr_name(check->items[i].attr)`. (Please note that no items - will be returned for unset attributes, so `ATTR_UNSET()` will return - false for all returned `attr_check.items[]` objects.) - -* Free the `attr_check` struct by calling `attr_check_free()`. diff --git a/Documentation/technical/api-grep.txt b/Documentation/technical/api-grep.txt deleted file mode 100644 index a69cc8964d..0000000000 --- a/Documentation/technical/api-grep.txt +++ /dev/null @@ -1,8 +0,0 @@ -grep API -======== - -Talk about <grep.h>, things like: - -* grep_buffer() - -(JC) diff --git a/Documentation/technical/api-history-graph.txt b/Documentation/technical/api-history-graph.txt deleted file mode 100644 index d0d1707c8c..0000000000 --- a/Documentation/technical/api-history-graph.txt +++ /dev/null @@ -1,173 +0,0 @@ -history graph API -================= - -The graph API is used to draw a text-based representation of the commit -history. The API generates the graph in a line-by-line fashion. - -Functions ---------- - -Core functions: - -* `graph_init()` creates a new `struct git_graph` - -* `graph_update()` moves the graph to a new commit. - -* `graph_next_line()` outputs the next line of the graph into a strbuf. It - does not add a terminating newline. - -* `graph_padding_line()` outputs a line of vertical padding in the graph. It - is similar to `graph_next_line()`, but is guaranteed to never print the line - containing the current commit. Where `graph_next_line()` would print the - commit line next, `graph_padding_line()` prints a line that simply extends - all branch lines downwards one row, leaving their positions unchanged. - -* `graph_is_commit_finished()` determines if the graph has output all lines - necessary for the current commit. If `graph_update()` is called before all - lines for the current commit have been printed, the next call to - `graph_next_line()` will output an ellipsis, to indicate that a portion of - the graph was omitted. - -The following utility functions are wrappers around `graph_next_line()` and -`graph_is_commit_finished()`. They always print the output to stdout. -They can all be called with a NULL graph argument, in which case no graph -output will be printed. - -* `graph_show_commit()` calls `graph_next_line()` and - `graph_is_commit_finished()` until one of them return non-zero. This prints - all graph lines up to, and including, the line containing this commit. - Output is printed to stdout. The last line printed does not contain a - terminating newline. - -* `graph_show_oneline()` calls `graph_next_line()` and prints the result to - stdout. The line printed does not contain a terminating newline. - -* `graph_show_padding()` calls `graph_padding_line()` and prints the result to - stdout. The line printed does not contain a terminating newline. - -* `graph_show_remainder()` calls `graph_next_line()` until - `graph_is_commit_finished()` returns non-zero. Output is printed to stdout. - The last line printed does not contain a terminating newline. Returns 1 if - output was printed, and 0 if no output was necessary. - -* `graph_show_strbuf()` prints the specified strbuf to stdout, prefixing all - lines but the first with a graph line. The caller is responsible for - ensuring graph output for the first line has already been printed to stdout. - (This can be done with `graph_show_commit()` or `graph_show_oneline()`.) If - a NULL graph is supplied, the strbuf is printed as-is. - -* `graph_show_commit_msg()` is similar to `graph_show_strbuf()`, but it also - prints the remainder of the graph, if more lines are needed after the strbuf - ends. It is better than directly calling `graph_show_strbuf()` followed by - `graph_show_remainder()` since it properly handles buffers that do not end in - a terminating newline. The output printed by `graph_show_commit_msg()` will - end in a newline if and only if the strbuf ends in a newline. - -Data structure --------------- -`struct git_graph` is an opaque data type used to store the current graph -state. - -Calling sequence ----------------- - -* Create a `struct git_graph` by calling `graph_init()`. When using the - revision walking API, this is done automatically by `setup_revisions()` if - the '--graph' option is supplied. - -* Use the revision walking API to walk through a group of contiguous commits. - The `get_revision()` function automatically calls `graph_update()` each time - it is invoked. - -* For each commit, call `graph_next_line()` repeatedly, until - `graph_is_commit_finished()` returns non-zero. Each call to - `graph_next_line()` will output a single line of the graph. The resulting - lines will not contain any newlines. `graph_next_line()` returns 1 if the - resulting line contains the current commit, or 0 if this is merely a line - needed to adjust the graph before or after the current commit. This return - value can be used to determine where to print the commit summary information - alongside the graph output. - -Limitations ------------ - -* `graph_update()` must be called with commits in topological order. It should - not be called on a commit if it has already been invoked with an ancestor of - that commit, or the graph output will be incorrect. - -* `graph_update()` must be called on a contiguous group of commits. If - `graph_update()` is called on a particular commit, it should later be called - on all parents of that commit. Parents must not be skipped, or the graph - output will appear incorrect. -+ -`graph_update()` may be used on a pruned set of commits only if the parent list -has been rewritten so as to include only ancestors from the pruned set. - -* The graph API does not currently support reverse commit ordering. In - order to implement reverse ordering, the graphing API needs an - (efficient) mechanism to find the children of a commit. - -Sample usage ------------- - ------------- -struct commit *commit; -struct git_graph *graph = graph_init(opts); - -while ((commit = get_revision(opts)) != NULL) { - while (!graph_is_commit_finished(graph)) - { - struct strbuf sb; - int is_commit_line; - - strbuf_init(&sb, 0); - is_commit_line = graph_next_line(graph, &sb); - fputs(sb.buf, stdout); - - if (is_commit_line) - log_tree_commit(opts, commit); - else - putchar(opts->diffopt.line_termination); - } -} ------------- - -Sample output -------------- - -The following is an example of the output from the graph API. This output does -not include any commit summary information--callers are responsible for -outputting that information, if desired. - ------------- -* -* -* -|\ -* | -| | * -| \ \ -| \ \ -*-. \ \ -|\ \ \ \ -| | * | | -| | | | | * -| | | | | * -| | | | | * -| | | | | |\ -| | | | | | * -| * | | | | | -| | | | | * \ -| | | | | |\ | -| | | | * | | | -| | | | * | | | -* | | | | | | | -| |/ / / / / / -|/| / / / / / -* | | | | | | -|/ / / / / / -* | | | | | -| | | | | * -| | | | |/ -| | | | * ------------- diff --git a/Documentation/technical/api-merge.txt b/Documentation/technical/api-merge.txt index 9dc1bed768..487d4d83ff 100644 --- a/Documentation/technical/api-merge.txt +++ b/Documentation/technical/api-merge.txt @@ -28,77 +28,9 @@ and `diff.c` for examples. * `struct ll_merge_options` -This describes the set of options the calling program wants to affect -the operation of a low-level (single file) merge. Some options: - -`virtual_ancestor`:: - Behave as though this were part of a merge between common - ancestors in a recursive merge. - If a helper program is specified by the - `[merge "<driver>"] recursive` configuration, it will - be used (see linkgit:gitattributes[5]). - -`variant`:: - Resolve local conflicts automatically in favor - of one side or the other (as in 'git merge-file' - `--ours`/`--theirs`/`--union`). Can be `0`, - `XDL_MERGE_FAVOR_OURS`, `XDL_MERGE_FAVOR_THEIRS`, or - `XDL_MERGE_FAVOR_UNION`. - -`renormalize`:: - Resmudge and clean the "base", "theirs" and "ours" files - before merging. Use this when the merge is likely to have - overlapped with a change in smudge/clean or end-of-line - normalization rules. +Check ll-merge.h for details. Low-level (single file) merge ----------------------------- -`ll_merge`:: - - Perform a three-way single-file merge in core. This is - a thin wrapper around `xdl_merge` that takes the path and - any merge backend specified in `.gitattributes` or - `.git/info/attributes` into account. Returns 0 for a - clean merge. - -Calling sequence: - -* Prepare a `struct ll_merge_options` to record options. - If you have no special requests, skip this and pass `NULL` - as the `opts` parameter to use the default options. - -* Allocate an mmbuffer_t variable for the result. - -* Allocate and fill variables with the file's original content - and two modified versions (using `read_mmfile`, for example). - -* Call `ll_merge()`. - -* Read the merged content from `result_buf.ptr` and `result_buf.size`. - -* Release buffers when finished. A simple - `free(ancestor.ptr); free(ours.ptr); free(theirs.ptr); - free(result_buf.ptr);` will do. - -If the modifications do not merge cleanly, `ll_merge` will return a -nonzero value and `result_buf` will generally include a description of -the conflict bracketed by markers such as the traditional `<<<<<<<` -and `>>>>>>>`. - -The `ancestor_label`, `our_label`, and `their_label` parameters are -used to label the different sides of a conflict if the merge driver -supports this. - -Everything else ---------------- - -Talk about <merge-recursive.h> and merge_file(): - - - merge_trees() to merge with rename detection - - merge_recursive() for ancestor consolidation - - try_merge_command() for other strategies - - conflict format - - merge options - -(Daniel, Miklos, Stephan, JC) +Check ll-merge.h for details. diff --git a/Documentation/technical/api-object-access.txt b/Documentation/technical/api-object-access.txt deleted file mode 100644 index 5b29622d00..0000000000 --- a/Documentation/technical/api-object-access.txt +++ /dev/null @@ -1,15 +0,0 @@ -object access API -================= - -Talk about <sha1-file.c> and <object.h> family, things like - -* read_sha1_file() -* read_object_with_reference() -* has_sha1_file() -* write_sha1_file() -* pretend_object_file() -* lookup_{object,commit,tag,blob,tree} -* parse_{object,commit,tag,blob,tree} -* Use of object flags - -(JC, Shawn, Daniel, Dscho, Linus) diff --git a/Documentation/technical/api-oid-array.txt b/Documentation/technical/api-oid-array.txt deleted file mode 100644 index c97428c2c3..0000000000 --- a/Documentation/technical/api-oid-array.txt +++ /dev/null @@ -1,90 +0,0 @@ -oid-array API -============== - -The oid-array API provides storage and manipulation of sets of object -identifiers. The emphasis is on storage and processing efficiency, -making them suitable for large lists. Note that the ordering of items is -not preserved over some operations. - -Data Structures ---------------- - -`struct oid_array`:: - - A single array of object IDs. This should be initialized by - assignment from `OID_ARRAY_INIT`. The `oid` member contains - the actual data. The `nr` member contains the number of items in - the set. The `alloc` and `sorted` members are used internally, - and should not be needed by API callers. - -Functions ---------- - -`oid_array_append`:: - Add an item to the set. The object ID will be placed at the end of - the array (but note that some operations below may lose this - ordering). - -`oid_array_lookup`:: - Perform a binary search of the array for a specific object ID. - If found, returns the offset (in number of elements) of the - object ID. If not found, returns a negative integer. If the array - is not sorted, this function has the side effect of sorting it. - -`oid_array_clear`:: - Free all memory associated with the array and return it to the - initial, empty state. - -`oid_array_for_each`:: - Iterate over each element of the list, executing the callback - function for each one. Does not sort the list, so any custom - hash order is retained. If the callback returns a non-zero - value, the iteration ends immediately and the callback's - return is propagated; otherwise, 0 is returned. - -`oid_array_for_each_unique`:: - Iterate over each unique element of the list in sorted order, - but otherwise behave like `oid_array_for_each`. If the array - is not sorted, this function has the side effect of sorting - it. - -`oid_array_filter`:: - Apply the callback function `want` to each entry in the array, - retaining only the entries for which the function returns true. - Preserve the order of the entries that are retained. - -Examples --------- - ------------------------------------------ -int print_callback(const struct object_id *oid, - void *data) -{ - printf("%s\n", oid_to_hex(oid)); - return 0; /* always continue */ -} - -void some_func(void) -{ - struct sha1_array hashes = OID_ARRAY_INIT; - struct object_id oid; - - /* Read objects into our set */ - while (read_object_from_stdin(oid.hash)) - oid_array_append(&hashes, &oid); - - /* Check if some objects are in our set */ - while (read_object_from_stdin(oid.hash)) { - if (oid_array_lookup(&hashes, &oid) >= 0) - printf("it's in there!\n"); - - /* - * Print the unique set of objects. We could also have - * avoided adding duplicate objects in the first place, - * but we would end up re-sorting the array repeatedly. - * Instead, this will sort once and then skip duplicates - * in linear time. - */ - oid_array_for_each_unique(&hashes, print_callback, NULL); -} ------------------------------------------ diff --git a/Documentation/technical/api-quote.txt b/Documentation/technical/api-quote.txt deleted file mode 100644 index e8a1bce94e..0000000000 --- a/Documentation/technical/api-quote.txt +++ /dev/null @@ -1,10 +0,0 @@ -quote API -========= - -Talk about <quote.h>, things like - -* sq_quote and unquote -* c_style quote and unquote -* quoting for foreign languages - -(JC) diff --git a/Documentation/technical/api-ref-iteration.txt b/Documentation/technical/api-ref-iteration.txt deleted file mode 100644 index ad9d019ff9..0000000000 --- a/Documentation/technical/api-ref-iteration.txt +++ /dev/null @@ -1,78 +0,0 @@ -ref iteration API -================= - - -Iteration of refs is done by using an iterate function which will call a -callback function for every ref. The callback function has this -signature: - - int handle_one_ref(const char *refname, const struct object_id *oid, - int flags, void *cb_data); - -There are different kinds of iterate functions which all take a -callback of this type. The callback is then called for each found ref -until the callback returns nonzero. The returned value is then also -returned by the iterate function. - -Iteration functions -------------------- - -* `head_ref()` just iterates the head ref. - -* `for_each_ref()` iterates all refs. - -* `for_each_ref_in()` iterates all refs which have a defined prefix and - strips that prefix from the passed variable refname. - -* `for_each_tag_ref()`, `for_each_branch_ref()`, `for_each_remote_ref()`, - `for_each_replace_ref()` iterate refs from the respective area. - -* `for_each_glob_ref()` iterates all refs that match the specified glob - pattern. - -* `for_each_glob_ref_in()` the previous and `for_each_ref_in()` combined. - -* Use `refs_` API for accessing submodules. The submodule ref store could - be obtained with `get_submodule_ref_store()`. - -* `for_each_rawref()` can be used to learn about broken ref and symref. - -* `for_each_reflog()` iterates each reflog file. - -Submodules ----------- - -If you want to iterate the refs of a submodule you first need to add the -submodules object database. You can do this by a code-snippet like -this: - - const char *path = "path/to/submodule" - if (add_submodule_odb(path)) - die("Error submodule '%s' not populated.", path); - -`add_submodule_odb()` will return zero on success. If you -do not do this you will get an error for each ref that it does not point -to a valid object. - -Note: As a side-effect of this you cannot safely assume that all -objects you lookup are available in superproject. All submodule objects -will be available the same way as the superprojects objects. - -Example: --------- - ----- -static int handle_remote_ref(const char *refname, - const unsigned char *sha1, int flags, void *cb_data) -{ - struct strbuf *output = cb_data; - strbuf_addf(output, "%s\n", refname); - return 0; -} - -... - - struct strbuf output = STRBUF_INIT; - for_each_remote_ref(handle_remote_ref, &output); - printf("%s", output.buf); ----- diff --git a/Documentation/technical/api-remote.txt b/Documentation/technical/api-remote.txt deleted file mode 100644 index f10941b2e8..0000000000 --- a/Documentation/technical/api-remote.txt +++ /dev/null @@ -1,127 +0,0 @@ -Remotes configuration API -========================= - -The API in remote.h gives access to the configuration related to -remotes. It handles all three configuration mechanisms historically -and currently used by Git, and presents the information in a uniform -fashion. Note that the code also handles plain URLs without any -configuration, giving them just the default information. - -struct remote -------------- - -`name`:: - - The user's nickname for the remote - -`url`:: - - An array of all of the url_nr URLs configured for the remote - -`pushurl`:: - - An array of all of the pushurl_nr push URLs configured for the remote - -`push`:: - - An array of refspecs configured for pushing, with - push_refspec being the literal strings, and push_refspec_nr - being the quantity. - -`fetch`:: - - An array of refspecs configured for fetching, with - fetch_refspec being the literal strings, and fetch_refspec_nr - being the quantity. - -`fetch_tags`:: - - The setting for whether to fetch tags (as a separate rule from - the configured refspecs); -1 means never to fetch tags, 0 - means to auto-follow tags based on the default heuristic, 1 - means to always auto-follow tags, and 2 means to fetch all - tags. - -`receivepack`, `uploadpack`:: - - The configured helper programs to run on the remote side, for - Git-native protocols. - -`http_proxy`:: - - The proxy to use for curl (http, https, ftp, etc.) URLs. - -`http_proxy_authmethod`:: - - The method used for authenticating against `http_proxy`. - -struct remotes can be found by name with remote_get(), and iterated -through with for_each_remote(). remote_get(NULL) will return the -default remote, given the current branch and configuration. - -struct refspec --------------- - -A struct refspec holds the parsed interpretation of a refspec. If it -will force updates (starts with a '+'), force is true. If it is a -pattern (sides end with '*') pattern is true. src and dest are the -two sides (including '*' characters if present); if there is only one -side, it is src, and dst is NULL; if sides exist but are empty (i.e., -the refspec either starts or ends with ':'), the corresponding side is -"". - -An array of strings can be parsed into an array of struct refspecs -using parse_fetch_refspec() or parse_push_refspec(). - -remote_find_tracking(), given a remote and a struct refspec with -either src or dst filled out, will fill out the other such that the -result is in the "fetch" specification for the remote (note that this -evaluates patterns and returns a single result). - -struct branch -------------- - -Note that this may end up moving to branch.h - -struct branch holds the configuration for a branch. It can be looked -up with branch_get(name) for "refs/heads/{name}", or with -branch_get(NULL) for HEAD. - -It contains: - -`name`:: - - The short name of the branch. - -`refname`:: - - The full path for the branch ref. - -`remote_name`:: - - The name of the remote listed in the configuration. - -`merge_name`:: - - An array of the "merge" lines in the configuration. - -`merge`:: - - An array of the struct refspecs used for the merge lines. That - is, merge[i]->dst is a local tracking ref which should be - merged into this branch by default. - -`merge_nr`:: - - The number of merge configurations - -branch_has_merge_config() returns true if the given branch has merge -configuration given. - -Other stuff ------------ - -There is other stuff in remote.h that is related, in general, to the -process of interacting with remotes. - -(Daniel Barkalow) diff --git a/Documentation/technical/api-revision-walking.txt b/Documentation/technical/api-revision-walking.txt deleted file mode 100644 index 03f9ea6ac4..0000000000 --- a/Documentation/technical/api-revision-walking.txt +++ /dev/null @@ -1,72 +0,0 @@ -revision walking API -==================== - -The revision walking API offers functions to build a list of revisions -and then iterate over that list. - -Calling sequence ----------------- - -The walking API has a given calling sequence: first you need to -initialize a rev_info structure, then add revisions to control what kind -of revision list do you want to get, finally you can iterate over the -revision list. - -Functions ---------- - -`repo_init_revisions`:: - - Initialize a rev_info structure with default values. The third - parameter may be NULL or can be prefix path, and then the `.prefix` - variable will be set to it. This is typically the first function you - want to call when you want to deal with a revision list. After calling - this function, you are free to customize options, like set - `.ignore_merges` to 0 if you don't want to ignore merges, and so on. See - `revision.h` for a complete list of available options. - -`add_pending_object`:: - - This function can be used if you want to add commit objects as revision - information. You can use the `UNINTERESTING` object flag to indicate if - you want to include or exclude the given commit (and commits reachable - from the given commit) from the revision list. -+ -NOTE: If you have the commits as a string list then you probably want to -use setup_revisions(), instead of parsing each string and using this -function. - -`setup_revisions`:: - - Parse revision information, filling in the `rev_info` structure, and - removing the used arguments from the argument list. Returns the number - of arguments left that weren't recognized, which are also moved to the - head of the argument list. The last parameter is used in case no - parameter given by the first two arguments. - -`prepare_revision_walk`:: - - Prepares the rev_info structure for a walk. You should check if it - returns any error (non-zero return code) and if it does not, you can - start using get_revision() to do the iteration. - -`get_revision`:: - - Takes a pointer to a `rev_info` structure and iterates over it, - returning a `struct commit *` each time you call it. The end of the - revision list is indicated by returning a NULL pointer. - -`reset_revision_walk`:: - - Reset the flags used by the revision walking api. You can use - this to do multiple sequential revision walks. - -Data structures ---------------- - -Talk about <revision.h>, things like: - -* two diff_options, one for path limiting, another for output; -* remaining functions; - -(Linus, JC, Dscho) diff --git a/Documentation/technical/api-run-command.txt b/Documentation/technical/api-run-command.txt deleted file mode 100644 index 8bf3e37f53..0000000000 --- a/Documentation/technical/api-run-command.txt +++ /dev/null @@ -1,264 +0,0 @@ -run-command API -=============== - -The run-command API offers a versatile tool to run sub-processes with -redirected input and output as well as with a modified environment -and an alternate current directory. - -A similar API offers the capability to run a function asynchronously, -which is primarily used to capture the output that the function -produces in the caller in order to process it. - - -Functions ---------- - -`child_process_init`:: - - Initialize a struct child_process variable. - -`start_command`:: - - Start a sub-process. Takes a pointer to a `struct child_process` - that specifies the details and returns pipe FDs (if requested). - See below for details. - -`finish_command`:: - - Wait for the completion of a sub-process that was started with - start_command(). - -`run_command`:: - - A convenience function that encapsulates a sequence of - start_command() followed by finish_command(). Takes a pointer - to a `struct child_process` that specifies the details. - -`run_command_v_opt`, `run_command_v_opt_cd_env`:: - - Convenience functions that encapsulate a sequence of - start_command() followed by finish_command(). The argument argv - specifies the program and its arguments. The argument opt is zero - or more of the flags `RUN_COMMAND_NO_STDIN`, `RUN_GIT_CMD`, - `RUN_COMMAND_STDOUT_TO_STDERR`, or `RUN_SILENT_EXEC_FAILURE` - that correspond to the members .no_stdin, .git_cmd, - .stdout_to_stderr, .silent_exec_failure of `struct child_process`. - The argument dir corresponds the member .dir. The argument env - corresponds to the member .env. - -`child_process_clear`:: - - Release the memory associated with the struct child_process. - Most users of the run-command API don't need to call this - function explicitly because `start_command` invokes it on - failure and `finish_command` calls it automatically already. - -The functions above do the following: - -. If a system call failed, errno is set and -1 is returned. A diagnostic - is printed. - -. If the program was not found, then -1 is returned and errno is set to - ENOENT; a diagnostic is printed only if .silent_exec_failure is 0. - -. Otherwise, the program is run. If it terminates regularly, its exit - code is returned. No diagnostic is printed, even if the exit code is - non-zero. - -. If the program terminated due to a signal, then the return value is the - signal number + 128, ie. the same value that a POSIX shell's $? would - report. A diagnostic is printed. - - -`start_async`:: - - Run a function asynchronously. Takes a pointer to a `struct - async` that specifies the details and returns a set of pipe FDs - for communication with the function. See below for details. - -`finish_async`:: - - Wait for the completion of an asynchronous function that was - started with start_async(). - -`run_hook`:: - - Run a hook. - The first argument is a pathname to an index file, or NULL - if the hook uses the default index file or no index is needed. - The second argument is the name of the hook. - The further arguments correspond to the hook arguments. - The last argument has to be NULL to terminate the arguments list. - If the hook does not exist or is not executable, the return - value will be zero. - If it is executable, the hook will be executed and the exit - status of the hook is returned. - On execution, .stdout_to_stderr and .no_stdin will be set. - (See below.) - - -Data structures ---------------- - -* `struct child_process` - -This describes the arguments, redirections, and environment of a -command to run in a sub-process. - -The caller: - -1. allocates and clears (using child_process_init() or - CHILD_PROCESS_INIT) a struct child_process variable; -2. initializes the members; -3. calls start_command(); -4. processes the data; -5. closes file descriptors (if necessary; see below); -6. calls finish_command(). - -The .argv member is set up as an array of string pointers (NULL -terminated), of which .argv[0] is the program name to run (usually -without a path). If the command to run is a git command, set argv[0] to -the command name without the 'git-' prefix and set .git_cmd = 1. - -Note that the ownership of the memory pointed to by .argv stays with the -caller, but it should survive until `finish_command` completes. If the -.argv member is NULL, `start_command` will point it at the .args -`argv_array` (so you may use one or the other, but you must use exactly -one). The memory in .args will be cleaned up automatically during -`finish_command` (or during `start_command` when it is unsuccessful). - -The members .in, .out, .err are used to redirect stdin, stdout, -stderr as follows: - -. Specify 0 to request no special redirection. No new file descriptor - is allocated. The child process simply inherits the channel from the - parent. - -. Specify -1 to have a pipe allocated; start_command() replaces -1 - by the pipe FD in the following way: - - .in: Returns the writable pipe end into which the caller writes; - the readable end of the pipe becomes the child's stdin. - - .out, .err: Returns the readable pipe end from which the caller - reads; the writable end of the pipe end becomes child's - stdout/stderr. - - The caller of start_command() must close the so returned FDs - after it has completed reading from/writing to it! - -. Specify a file descriptor > 0 to be used by the child: - - .in: The FD must be readable; it becomes child's stdin. - .out: The FD must be writable; it becomes child's stdout. - .err: The FD must be writable; it becomes child's stderr. - - The specified FD is closed by start_command(), even if it fails to - run the sub-process! - -. Special forms of redirection are available by setting these members - to 1: - - .no_stdin, .no_stdout, .no_stderr: The respective channel is - redirected to /dev/null. - - .stdout_to_stderr: stdout of the child is redirected to its - stderr. This happens after stderr is itself redirected. - So stdout will follow stderr to wherever it is - redirected. - -To modify the environment of the sub-process, specify an array of -string pointers (NULL terminated) in .env: - -. If the string is of the form "VAR=value", i.e. it contains '=' - the variable is added to the child process's environment. - -. If the string does not contain '=', it names an environment - variable that will be removed from the child process's environment. - -If the .env member is NULL, `start_command` will point it at the -.env_array `argv_array` (so you may use one or the other, but not both). -The memory in .env_array will be cleaned up automatically during -`finish_command` (or during `start_command` when it is unsuccessful). - -To specify a new initial working directory for the sub-process, -specify it in the .dir member. - -If the program cannot be found, the functions return -1 and set -errno to ENOENT. Normally, an error message is printed, but if -.silent_exec_failure is set to 1, no message is printed for this -special error condition. - - -* `struct async` - -This describes a function to run asynchronously, whose purpose is -to produce output that the caller reads. - -The caller: - -1. allocates and clears (memset(&asy, 0, sizeof(asy));) a - struct async variable; -2. initializes .proc and .data; -3. calls start_async(); -4. processes communicates with proc through .in and .out; -5. closes .in and .out; -6. calls finish_async(). - -The members .in, .out are used to provide a set of fd's for -communication between the caller and the callee as follows: - -. Specify 0 to have no file descriptor passed. The callee will - receive -1 in the corresponding argument. - -. Specify < 0 to have a pipe allocated; start_async() replaces - with the pipe FD in the following way: - - .in: Returns the writable pipe end into which the caller - writes; the readable end of the pipe becomes the function's - in argument. - - .out: Returns the readable pipe end from which the caller - reads; the writable end of the pipe becomes the function's - out argument. - - The caller of start_async() must close the returned FDs after it - has completed reading from/writing from them. - -. Specify a file descriptor > 0 to be used by the function: - - .in: The FD must be readable; it becomes the function's in. - .out: The FD must be writable; it becomes the function's out. - - The specified FD is closed by start_async(), even if it fails to - run the function. - -The function pointer in .proc has the following signature: - - int proc(int in, int out, void *data); - -. in, out specifies a set of file descriptors to which the function - must read/write the data that it needs/produces. The function - *must* close these descriptors before it returns. A descriptor - may be -1 if the caller did not configure a descriptor for that - direction. - -. data is the value that the caller has specified in the .data member - of struct async. - -. The return value of the function is 0 on success and non-zero - on failure. If the function indicates failure, finish_async() will - report failure as well. - - -There are serious restrictions on what the asynchronous function can do -because this facility is implemented by a thread in the same address -space on most platforms (when pthreads is available), but by a pipe to -a forked process otherwise: - -. It cannot change the program's state (global variables, environment, - etc.) in a way that the caller notices; in other words, .in and .out - are the only communication channels to the caller. - -. It must not change the program's state that the caller of the - facility also uses. diff --git a/Documentation/technical/api-setup.txt b/Documentation/technical/api-setup.txt deleted file mode 100644 index eb1fa9853e..0000000000 --- a/Documentation/technical/api-setup.txt +++ /dev/null @@ -1,47 +0,0 @@ -setup API -========= - -Talk about - -* setup_git_directory() -* setup_git_directory_gently() -* is_inside_git_dir() -* is_inside_work_tree() -* setup_work_tree() - -(Dscho) - -Pathspec --------- - -See glossary-context.txt for the syntax of pathspec. In memory, a -pathspec set is represented by "struct pathspec" and is prepared by -parse_pathspec(). This function takes several arguments: - -- magic_mask specifies what features that are NOT supported by the - following code. If a user attempts to use such a feature, - parse_pathspec() can reject it early. - -- flags specifies other things that the caller wants parse_pathspec to - perform. - -- prefix and args come from cmd_* functions - -parse_pathspec() helps catch unsupported features and reject them -politely. At a lower level, different pathspec-related functions may -not support the same set of features. Such pathspec-sensitive -functions are guarded with GUARD_PATHSPEC(), which will die in an -unfriendly way when an unsupported feature is requested. - -The command designers are supposed to make sure that GUARD_PATHSPEC() -never dies. They have to make sure all unsupported features are caught -by parse_pathspec(), not by GUARD_PATHSPEC. grepping GUARD_PATHSPEC() -should give the designers all pathspec-sensitive codepaths and what -features they support. - -A similar process is applied when a new pathspec magic is added. The -designer lifts the GUARD_PATHSPEC restriction in the functions that -support the new magic. At the same time (s)he has to make sure this -new feature will be caught at parse_pathspec() in commands that cannot -handle the new magic in some cases. grepping parse_pathspec() should -help. diff --git a/Documentation/technical/api-sigchain.txt b/Documentation/technical/api-sigchain.txt deleted file mode 100644 index 9e1189ef01..0000000000 --- a/Documentation/technical/api-sigchain.txt +++ /dev/null @@ -1,41 +0,0 @@ -sigchain API -============ - -Code often wants to set a signal handler to clean up temporary files or -other work-in-progress when we die unexpectedly. For multiple pieces of -code to do this without conflicting, each piece of code must remember -the old value of the handler and restore it either when: - - 1. The work-in-progress is finished, and the handler is no longer - necessary. The handler should revert to the original behavior - (either another handler, SIG_DFL, or SIG_IGN). - - 2. The signal is received. We should then do our cleanup, then chain - to the next handler (or die if it is SIG_DFL). - -Sigchain is a tiny library for keeping a stack of handlers. Your handler -and installation code should look something like: - ------------------------------------------- - void clean_foo_on_signal(int sig) - { - clean_foo(); - sigchain_pop(sig); - raise(sig); - } - - void other_func() - { - sigchain_push_common(clean_foo_on_signal); - mess_up_foo(); - clean_foo(); - } ------------------------------------------- - -Handlers are given the typedef of sigchain_fun. This is the same type -that is given to signal() or sigaction(). It is perfectly reasonable to -push SIG_DFL or SIG_IGN onto the stack. - -You can sigchain_push and sigchain_pop individual signals. For -convenience, sigchain_push_common will push the handler onto the stack -for many common signals. diff --git a/Documentation/technical/api-submodule-config.txt b/Documentation/technical/api-submodule-config.txt deleted file mode 100644 index fb06089393..0000000000 --- a/Documentation/technical/api-submodule-config.txt +++ /dev/null @@ -1,66 +0,0 @@ -submodule config cache API -========================== - -The submodule config cache API allows to read submodule -configurations/information from specified revisions. Internally -information is lazily read into a cache that is used to avoid -unnecessary parsing of the same .gitmodules files. Lookups can be done by -submodule path or name. - -Usage ------ - -To initialize the cache with configurations from the worktree the caller -typically first calls `gitmodules_config()` to read values from the -worktree .gitmodules and then to overlay the local git config values -`parse_submodule_config_option()` from the config parsing -infrastructure. - -The caller can look up information about submodules by using the -`submodule_from_path()` or `submodule_from_name()` functions. They return -a `struct submodule` which contains the values. The API automatically -initializes and allocates the needed infrastructure on-demand. If the -caller does only want to lookup values from revisions the initialization -can be skipped. - -If the internal cache might grow too big or when the caller is done with -the API, all internally cached values can be freed with submodule_free(). - -Data Structures ---------------- - -`struct submodule`:: - - This structure is used to return the information about one - submodule for a certain revision. It is returned by the lookup - functions. - -Functions ---------- - -`void submodule_free(struct repository *r)`:: - - Use these to free the internally cached values. - -`int parse_submodule_config_option(const char *var, const char *value)`:: - - Can be passed to the config parsing infrastructure to parse - local (worktree) submodule configurations. - -`const struct submodule *submodule_from_path(const unsigned char *treeish_name, const char *path)`:: - - Given a tree-ish in the superproject and a path, return the - submodule that is bound at the path in the named tree. - -`const struct submodule *submodule_from_name(const unsigned char *treeish_name, const char *name)`:: - - The same as above but lookup by name. - -Whenever a submodule configuration is parsed in `parse_submodule_config_option` -via e.g. `gitmodules_config()`, it will overwrite the null_sha1 entry. -So in the normal case, when HEAD:.gitmodules is parsed first and then overlayed -with the repository configuration, the null_sha1 entry contains the local -configuration of a submodule (e.g. consolidated values from local git -configuration and the .gitmodules file in the worktree). - -For an example usage see test-submodule-config.c. diff --git a/Documentation/technical/api-trace.txt b/Documentation/technical/api-trace.txt deleted file mode 100644 index fadb5979c4..0000000000 --- a/Documentation/technical/api-trace.txt +++ /dev/null @@ -1,140 +0,0 @@ -trace API -========= - -The trace API can be used to print debug messages to stderr or a file. Trace -code is inactive unless explicitly enabled by setting `GIT_TRACE*` environment -variables. - -The trace implementation automatically adds `timestamp file:line ... \n` to -all trace messages. E.g.: - ------------- -23:59:59.123456 git.c:312 trace: built-in: git 'foo' -00:00:00.000001 builtin/foo.c:99 foo: some message ------------- - -Data Structures ---------------- - -`struct trace_key`:: - - Defines a trace key (or category). The default (for API functions that - don't take a key) is `GIT_TRACE`. -+ -E.g. to define a trace key controlled by environment variable `GIT_TRACE_FOO`: -+ ------------- -static struct trace_key trace_foo = TRACE_KEY_INIT(FOO); - -static void trace_print_foo(const char *message) -{ - trace_printf_key(&trace_foo, "%s", message); -} ------------- -+ -Note: don't use `const` as the trace implementation stores internal state in -the `trace_key` structure. - -Functions ---------- - -`int trace_want(struct trace_key *key)`:: - - Checks whether the trace key is enabled. Used to prevent expensive - string formatting before calling one of the printing APIs. - -`void trace_disable(struct trace_key *key)`:: - - Disables tracing for the specified key, even if the environment - variable was set. - -`void trace_printf(const char *format, ...)`:: -`void trace_printf_key(struct trace_key *key, const char *format, ...)`:: - - Prints a formatted message, similar to printf. - -`void trace_argv_printf(const char **argv, const char *format, ...)``:: - - Prints a formatted message, followed by a quoted list of arguments. - -`void trace_strbuf(struct trace_key *key, const struct strbuf *data)`:: - - Prints the strbuf, without additional formatting (i.e. doesn't - choke on `%` or even `\0`). - -`uint64_t getnanotime(void)`:: - - Returns nanoseconds since the epoch (01/01/1970), typically used - for performance measurements. -+ -Currently there are high precision timer implementations for Linux (using -`clock_gettime(CLOCK_MONOTONIC)`) and Windows (`QueryPerformanceCounter`). -Other platforms use `gettimeofday` as time source. - -`void trace_performance(uint64_t nanos, const char *format, ...)`:: -`void trace_performance_since(uint64_t start, const char *format, ...)`:: - - Prints the elapsed time (in nanoseconds), or elapsed time since - `start`, followed by a formatted message. Enabled via environment - variable `GIT_TRACE_PERFORMANCE`. Used for manual profiling, e.g.: -+ ------------- -uint64_t start = getnanotime(); -/* code section to measure */ -trace_performance_since(start, "foobar"); ------------- -+ ------------- -uint64_t t = 0; -for (;;) { - /* ignore */ - t -= getnanotime(); - /* code section to measure */ - t += getnanotime(); - /* ignore */ -} -trace_performance(t, "frotz"); ------------- - -Bugs & Caveats --------------- - -GIT_TRACE_* environment variables can be used to tell Git to show -trace output to its standard error stream. Git can often spawn a pager -internally to run its subcommand and send its standard output and -standard error to it. - -Because GIT_TRACE_PERFORMANCE trace is generated only at the very end -of the program with atexit(), which happens after the pager exits, it -would not work well if you send its log to the standard error output -and let Git spawn the pager at the same time. - -As a work around, you can for example use '--no-pager', or set -GIT_TRACE_PERFORMANCE to another file descriptor which is redirected -to stderr, or set GIT_TRACE_PERFORMANCE to a file specified by its -absolute path. - -For example instead of the following command which by default may not -print any performance information: - ------------- -GIT_TRACE_PERFORMANCE=2 git log -1 ------------- - -you may want to use: - ------------- -GIT_TRACE_PERFORMANCE=2 git --no-pager log -1 ------------- - -or: - ------------- -GIT_TRACE_PERFORMANCE=3 3>&2 git log -1 ------------- - -or: - ------------- -GIT_TRACE_PERFORMANCE=/path/to/log/file git log -1 ------------- diff --git a/Documentation/technical/api-trace2.txt b/Documentation/technical/api-trace2.txt index a045dbe422..4f07ceadcb 100644 --- a/Documentation/technical/api-trace2.txt +++ b/Documentation/technical/api-trace2.txt @@ -178,7 +178,7 @@ describe the simplified forms. == Public API -All Trace2 API functions send a messsage to all of the active +All Trace2 API functions send a message to all of the active Trace2 Targets. This section describes the set of available messages. @@ -188,261 +188,36 @@ purposes. === Basic Command Messages These are concerned with the lifetime of the overall git process. - -`void trace2_initialize_clock()`:: - - Initialize the Trace2 start clock and nothing else. This should - be called at the very top of main() to capture the process start - time and reduce startup order dependencies. - -`void trace2_initialize()`:: - - Determines if any Trace2 Targets should be enabled and - initializes the Trace2 facility. This includes setting up the - Trace2 thread local storage (TLS). -+ -This function emits a "version" message containing the version of git -and the Trace2 protocol. -+ -This function should be called from `main()` as early as possible in -the life of the process after essential process initialization. - -`int trace2_is_enabled()`:: - - Returns 1 if Trace2 is enabled (at least one target is - active). - -`void trace2_cmd_start(int argc, const char **argv)`:: - - Emits a "start" message containing the process command line - arguments. - -`int trace2_cmd_exit(int exit_code)`:: - - Emits an "exit" message containing the process exit-code and - elapsed time. -+ -Returns the exit-code. - -`void trace2_cmd_error(const char *fmt, va_list ap)`:: - - Emits an "error" message containing a formatted error message. - -`void trace2_cmd_path(const char *pathname)`:: - - Emits a "cmd_path" message with the full pathname of the - current process. +e.g: `void trace2_initialize_clock()`, `void trace2_initialize()`, +`int trace2_is_enabled()`, `void trace2_cmd_start(int argc, const char **argv)`. === Command Detail Messages These are concerned with describing the specific Git command after the command line, config, and environment are inspected. - -`void trace2_cmd_name(const char *name)`:: - - Emits a "cmd_name" message with the canonical name of the - command, for example "status" or "checkout". - -`void trace2_cmd_mode(const char *mode)`:: - - Emits a "cmd_mode" message with a qualifier name to further - describe the current git command. -+ -This message is intended to be used with git commands having multiple -major modes. For example, a "checkout" command can checkout a new -branch or it can checkout a single file, so the checkout code could -emit a cmd_mode message of "branch" or "file". - -`void trace2_cmd_alias(const char *alias, const char **argv_expansion)`:: - - Emits an "alias" message containing the alias used and the - argument expansion. - -`void trace2_def_param(const char *parameter, const char *value)`:: - - Emits a "def_param" message containing a key/value pair. -+ -This message is intended to report some global aspect of the current -command, such as a configuration setting or command line switch that -significantly affects program performance or behavior, such as -`core.abbrev`, `status.showUntrackedFiles`, or `--no-ahead-behind`. - -`void trace2_cmd_list_config()`:: - - Emits a "def_param" messages for "important" configuration - settings. -+ -The environment variable `GIT_TRACE2_CONFIG_PARAMS` or the `trace2.configParams` -config value can be set to a -list of patterns of important configuration settings, for example: -`core.*,remote.*.url`. This function will iterate over all config -settings and emit a "def_param" message for each match. - -`void trace2_cmd_set_config(const char *key, const char *value)`:: - - Emits a "def_param" message for a new or updated key/value - pair IF `key` is considered important. -+ -This is used to hook into `git_config_set()` and catch any -configuration changes and update a value previously reported by -`trace2_cmd_list_config()`. - -`void trace2_def_repo(struct repository *repo)`:: - - Registers a repository with the Trace2 layer. Assigns a - unique "repo-id" to `repo->trace2_repo_id`. -+ -Emits a "worktree" messages containing the repo-id and the worktree -pathname. -+ -Region and data messages (described later) may refer to this repo-id. -+ -The main/top-level repository will have repo-id value 1 (aka "r1"). -+ -The repo-id field is in anticipation of future in-proc submodule -repositories. +e.g: `void trace2_cmd_name(const char *name)`, +`void trace2_cmd_mode(const char *mode)`. === Child Process Messages These are concerned with the various spawned child processes, including shell scripts, git commands, editors, pagers, and hooks. -`void trace2_child_start(struct child_process *cmd)`:: - - Emits a "child_start" message containing the "child-id", - "child-argv", and "child-classification". -+ -Before calling this, set `cmd->trace2_child_class` to a name -describing the type of child process, for example "editor". -+ -This function assigns a unique "child-id" to `cmd->trace2_child_id`. -This field is used later during the "child_exit" message to associate -it with the "child_start" message. -+ -This function should be called before spawning the child process. - -`void trace2_child_exit(struct child_proess *cmd, int child_exit_code)`:: - - Emits a "child_exit" message containing the "child-id", - the child's elapsed time and exit-code. -+ -The reported elapsed time includes the process creation overhead and -time spend waiting for it to exit, so it may be slightly longer than -the time reported by the child itself. -+ -This function should be called after reaping the child process. - -`int trace2_exec(const char *exe, const char **argv)`:: - - Emits a "exec" message containing the "exec-id" and the - argv of the new process. -+ -This function should be called before calling one of the `exec()` -variants, such as `execvp()`. -+ -This function returns a unique "exec-id". This value is used later -if the exec() fails and a "exec-result" message is necessary. - -`void trace2_exec_result(int exec_id, int error_code)`:: - - Emits a "exec_result" message containing the "exec-id" - and the error code. -+ -On Unix-based systems, `exec()` does not return if successful. -This message is used to indicate that the `exec()` failed and -that the current program is continuing. +e.g: `void trace2_child_start(struct child_process *cmd)`. === Git Thread Messages These messages are concerned with Git thread usage. -`void trace2_thread_start(const char *thread_name)`:: - - Emits a "thread_start" message. -+ -The `thread_name` field should be a descriptive name, such as the -unique name of the thread-proc. A unique "thread-id" will be added -to the name to uniquely identify thread instances. -+ -Region and data messages (described later) may refer to this thread -name. -+ -This function must be called by the thread-proc of the new thread -(so that TLS data is properly initialized) and not by the caller -of `pthread_create()`. - -`void trace2_thread_exit()`:: - - Emits a "thread_exit" message containing the thread name - and the thread elapsed time. -+ -This function must be called by the thread-proc before it returns -(so that the coorect TLS data is used and cleaned up. It should -not be called by the caller of `pthread_join()`. +e.g: `void trace2_thread_start(const char *thread_name)`. === Region and Data Messages These are concerned with recording performance data -over regions or spans of code. - -`void trace2_region_enter(const char *category, const char *label, const struct repository *repo)`:: - -`void trace2_region_enter_printf(const char *category, const char *label, const struct repository *repo, const char *fmt, ...)`:: - -`void trace2_region_enter_printf_va(const char *category, const char *label, const struct repository *repo, const char *fmt, va_list ap)`:: - - Emits a thread-relative "region_enter" message with optional - printf string. -+ -This function pushes a new region nesting stack level on the current -thread and starts a clock for the new stack frame. -+ -The `category` field is an arbitrary category name used to classify -regions by feature area, such as "status" or "index". At this time -it is only just printed along with the rest of the message. It may -be used in the future to filter messages. -+ -The `label` field is an arbitrary label used to describe the activity -being started, such as "read_recursive" or "do_read_index". -+ -The `repo` field, if set, will be used to get the "repo-id", so that -recursive oerations can be attributed to the correct repository. - -`void trace2_region_leave(const char *category, const char *label, const struct repository *repo)`:: - -`void trace2_region_leave_printf(const char *category, const char *label, const struct repository *repo, const char *fmt, ...)`:: - -`void trace2_region_leave_printf_va(const char *category, const char *label, const struct repository *repo, const char *fmt, va_list ap)`:: - - Emits a thread-relative "region_leave" message with optional - printf string. -+ -This function pops the region nesting stack on the current thread -and reports the elapsed time of the stack frame. -+ -The `category`, `label`, and `repo` fields are the same as above. -The `category` and `label` do not need to match the correpsonding -"region_enter" message, but it makes the data stream easier to -understand. - -`void trace2_data_string(const char *category, const struct repository *repo, const char *key, const char * value)`:: - -`void trace2_data_intmax(const char *category, const struct repository *repo, const char *key, intmax value)`:: - -`void trace2_data_json(const char *category, const struct repository *repo, const char *key, const struct json_writer *jw)`:: - - Emits a region- and thread-relative "data" or "data_json" message. -+ -This is a key/value pair message containing information about the -current thread, region stack, and repository. This could be used -to print the number of files in a directory during a multi-threaded -recursive tree walk. - -`void trace2_printf(const char *fmt, ...)`:: - -`void trace2_printf_va(const char *fmt, va_list ap)`:: +over regions or spans of code. e.g: +`void trace2_region_enter(const char *category, const char *label, const struct repository *repo)`. - Emits a region- and thread-relative "printf" message. +Refer to trace2.h for details about all trace2 functions. == Trace2 Target Formats @@ -816,7 +591,7 @@ with "?". Note that the session-id of the child process is not available to the current/spawning process, so the child's PID is reported here as a hint for post-processing. (But it is only a hint because the child -proces may be a shell script which doesn't have a session-id.) +process may be a shell script which doesn't have a session-id.) + Note that the `t_rel` field contains the observed run time in seconds for the child process (starting before the fork/exec/spawn and @@ -1176,7 +951,7 @@ d0 | main | atexit | | 0.028809 | | + Regions may be nested. This causes messages to be indented in the PERF target, for example. -Elapsed times are relative to the start of the correpsonding nesting +Elapsed times are relative to the start of the corresponding nesting level as expected. For example, if we add region message to: + ---------------- @@ -1371,7 +1146,7 @@ d0 | main | atexit | | 0.030027 | | In this example, the preload region took 0.009122 seconds. The 7 threads took between 0.006069 and 0.008947 seconds to work on their portion of the index. Thread "th01" worked on 508 items at offset 0. Thread "th02" -worked on 508 items at offset 2032. Thread "th04" worked on 508 itemts +worked on 508 items at offset 2032. Thread "th04" worked on 508 items at offset 508. + This example also shows that thread names are assigned in a racy manner diff --git a/Documentation/technical/api-tree-walking.txt b/Documentation/technical/api-tree-walking.txt deleted file mode 100644 index 7962e32854..0000000000 --- a/Documentation/technical/api-tree-walking.txt +++ /dev/null @@ -1,149 +0,0 @@ -tree walking API -================ - -The tree walking API is used to traverse and inspect trees. - -Data Structures ---------------- - -`struct name_entry`:: - - An entry in a tree. Each entry has a sha1 identifier, pathname, and - mode. - -`struct tree_desc`:: - - A semi-opaque data structure used to maintain the current state of the - walk. -+ -* `buffer` is a pointer into the memory representation of the tree. It always -points at the current entry being visited. - -* `size` counts the number of bytes left in the `buffer`. - -* `entry` points to the current entry being visited. - -`struct traverse_info`:: - - A structure used to maintain the state of a traversal. -+ -* `prev` points to the traverse_info which was used to descend into the -current tree. If this is the top-level tree `prev` will point to -a dummy traverse_info. - -* `name` is the entry for the current tree (if the tree is a subtree). - -* `pathlen` is the length of the full path for the current tree. - -* `conflicts` can be used by callbacks to maintain directory-file conflicts. - -* `fn` is a callback called for each entry in the tree. See Traversing for more -information. - -* `data` can be anything the `fn` callback would want to use. - -* `show_all_errors` tells whether to stop at the first error or not. - -Initializing ------------- - -`init_tree_desc`:: - - Initialize a `tree_desc` and decode its first entry. The buffer and - size parameters are assumed to be the same as the buffer and size - members of `struct tree`. - -`fill_tree_descriptor`:: - - Initialize a `tree_desc` and decode its first entry given the - object ID of a tree. Returns the `buffer` member if the latter - is a valid tree identifier and NULL otherwise. - -`setup_traverse_info`:: - - Initialize a `traverse_info` given the pathname of the tree to start - traversing from. - -Walking -------- - -`tree_entry`:: - - Visit the next entry in a tree. Returns 1 when there are more entries - left to visit and 0 when all entries have been visited. This is - commonly used in the test of a while loop. - -`tree_entry_len`:: - - Calculate the length of a tree entry's pathname. This utilizes the - memory structure of a tree entry to avoid the overhead of using a - generic strlen(). - -`update_tree_entry`:: - - Walk to the next entry in a tree. This is commonly used in conjunction - with `tree_entry_extract` to inspect the current entry. - -`tree_entry_extract`:: - - Decode the entry currently being visited (the one pointed to by - `tree_desc's` `entry` member) and return the sha1 of the entry. The - `pathp` and `modep` arguments are set to the entry's pathname and mode - respectively. - -`get_tree_entry`:: - - Find an entry in a tree given a pathname and the sha1 of a tree to - search. Returns 0 if the entry is found and -1 otherwise. The third - and fourth parameters are set to the entry's sha1 and mode - respectively. - -Traversing ----------- - -`traverse_trees`:: - - Traverse `n` number of trees in parallel. The `fn` callback member of - `traverse_info` is called once for each tree entry. - -`traverse_callback_t`:: - The arguments passed to the traverse callback are as follows: -+ -* `n` counts the number of trees being traversed. - -* `mask` has its nth bit set if something exists in the nth entry. - -* `dirmask` has its nth bit set if the nth tree's entry is a directory. - -* `entry` is an array of size `n` where the nth entry is from the nth tree. - -* `info` maintains the state of the traversal. - -+ -Returning a negative value will terminate the traversal. Otherwise the -return value is treated as an update mask. If the nth bit is set the nth tree -will be updated and if the bit is not set the nth tree entry will be the -same in the next callback invocation. - -`make_traverse_path`:: - - Generate the full pathname of a tree entry based from the root of the - traversal. For example, if the traversal has recursed into another - tree named "bar" the pathname of an entry "baz" in the "bar" - tree would be "bar/baz". - -`traverse_path_len`:: - - Calculate the length of a pathname returned by `make_traverse_path`. - This utilizes the memory structure of a tree entry to avoid the - overhead of using a generic strlen(). - -`strbuf_make_traverse_path`:: - - Convenience wrapper to `make_traverse_path` into a strbuf. - -Authors -------- - -Written by Junio C Hamano <gitster@pobox.com> and Linus Torvalds -<torvalds@linux-foundation.org> diff --git a/Documentation/technical/api-xdiff-interface.txt b/Documentation/technical/api-xdiff-interface.txt deleted file mode 100644 index 6296ecad1d..0000000000 --- a/Documentation/technical/api-xdiff-interface.txt +++ /dev/null @@ -1,7 +0,0 @@ -xdiff interface API -=================== - -Talk about our calling convention to xdiff library, including -xdiff_emit_consume_fn. - -(Dscho, JC) diff --git a/Documentation/technical/commit-graph.txt b/Documentation/technical/commit-graph.txt index 729fbcb32f..808fa30b99 100644 --- a/Documentation/technical/commit-graph.txt +++ b/Documentation/technical/commit-graph.txt @@ -22,11 +22,11 @@ as "commit-graph" either in the .git/objects/info directory or in the info directory of an alternate. The commit-graph file stores the commit graph structure along with some -extra metadata to speed up graph walks. By listing commit OIDs in lexi- -cographic order, we can identify an integer position for each commit and -refer to the parents of a commit using those integer positions. We use -binary search to find initial commits and then use the integer positions -for fast lookups during the walk. +extra metadata to speed up graph walks. By listing commit OIDs in +lexicographic order, we can identify an integer position for each commit +and refer to the parents of a commit using those integer positions. We +use binary search to find initial commits and then use the integer +positions for fast lookups during the walk. A consumer may load the following info for a commit from the graph: @@ -85,7 +85,7 @@ have generation number represented by the macro GENERATION_NUMBER_ZERO = 0. Since the commit-graph file is closed under reachability, we can guarantee the following weaker condition on all commits: - If A and B are commits with generation numbers N amd M, respectively, + If A and B are commits with generation numbers N and M, respectively, and N < M, then A cannot reach B. Note how the strict inequality differs from the inequality when we have @@ -323,14 +323,14 @@ Related Links [0] https://bugs.chromium.org/p/git/issues/detail?id=8 Chromium work item for: Serialized Commit Graph -[1] https://public-inbox.org/git/20110713070517.GC18566@sigill.intra.peff.net/ +[1] https://lore.kernel.org/git/20110713070517.GC18566@sigill.intra.peff.net/ An abandoned patch that introduced generation numbers. -[2] https://public-inbox.org/git/20170908033403.q7e6dj7benasrjes@sigill.intra.peff.net/ +[2] https://lore.kernel.org/git/20170908033403.q7e6dj7benasrjes@sigill.intra.peff.net/ Discussion about generation numbers on commits and how they interact with fsck. -[3] https://public-inbox.org/git/20170908034739.4op3w4f2ma5s65ku@sigill.intra.peff.net/ +[3] https://lore.kernel.org/git/20170908034739.4op3w4f2ma5s65ku@sigill.intra.peff.net/ More discussion about generation numbers and not storing them inside commit objects. A valuable quote: @@ -342,9 +342,9 @@ Related Links commit objects (i.e., packv4 or something like the "metapacks" I proposed a few years ago)." -[4] https://public-inbox.org/git/20180108154822.54829-1-git@jeffhostetler.com/T/#u +[4] https://lore.kernel.org/git/20180108154822.54829-1-git@jeffhostetler.com/T/#u A patch to remove the ahead-behind calculation from 'status'. -[5] https://public-inbox.org/git/f27db281-abad-5043-6d71-cbb083b1c877@gmail.com/ +[5] https://lore.kernel.org/git/f27db281-abad-5043-6d71-cbb083b1c877@gmail.com/ A discussion of a "two-dimensional graph position" that can allow reading multiple commit-graph chains at the same time. diff --git a/Documentation/technical/hash-function-transition.txt b/Documentation/technical/hash-function-transition.txt index 2ae8fa470a..5b2db3be1e 100644 --- a/Documentation/technical/hash-function-transition.txt +++ b/Documentation/technical/hash-function-transition.txt @@ -531,7 +531,7 @@ Until Git protocol gains SHA-256 support, using SHA-256 based storage on public-facing Git servers is strongly discouraged. Once Git protocol gains SHA-256 support, SHA-256 based servers are likely not to support SHA-1 compatibility, to avoid what may be a very expensive -hash reencode during clone and to encourage peers to modernize. +hash re-encode during clone and to encourage peers to modernize. The design described here allows fetches by SHA-1 clients of a personal SHA-256 repository because it's not much more difficult than @@ -602,7 +602,7 @@ git --output-format=sha1 log abac87a^{sha1}..f787cac^{sha256} Choice of Hash -------------- -In early 2005, around the time that Git was written, Xiaoyun Wang, +In early 2005, around the time that Git was written, Xiaoyun Wang, Yiqun Lisa Yin, and Hongbo Yu announced an attack finding SHA-1 collisions in 2^69 operations. In August they published details. Luckily, no practical demonstrations of a collision in full SHA-1 were @@ -730,7 +730,7 @@ adoption. Using hash functions in parallel ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -(e.g. https://public-inbox.org/git/22708.8913.864049.452252@chiark.greenend.org.uk/ ) +(e.g. https://lore.kernel.org/git/22708.8913.864049.452252@chiark.greenend.org.uk/ ) Objects newly created would be addressed by the new hash, but inside such an object (e.g. commit) it is still possible to address objects using the old hash function. @@ -783,7 +783,7 @@ bmwill@google.com, jonathantanmy@google.com, jrnieder@gmail.com, sbeller@google.com Initial version sent to -http://public-inbox.org/git/20170304011251.GA26789@aiede.mtv.corp.google.com +http://lore.kernel.org/git/20170304011251.GA26789@aiede.mtv.corp.google.com 2017-03-03 jrnieder@gmail.com Incorporated suggestions from jonathantanmy and sbeller: @@ -820,8 +820,8 @@ Later history: edits. This document history is no longer being maintained as it would now be superfluous to the commit log -[1] http://public-inbox.org/git/CA+55aFzJtejiCjV0e43+9oR3QuJK2PiFiLQemytoLpyJWe6P9w@mail.gmail.com/ -[2] http://public-inbox.org/git/CA+55aFz+gkAsDZ24zmePQuEs1XPS9BP_s8O7Q4wQ7LV7X5-oDA@mail.gmail.com/ -[3] http://public-inbox.org/git/20170306084353.nrns455dvkdsfgo5@sigill.intra.peff.net/ -[4] http://public-inbox.org/git/20170304224936.rqqtkdvfjgyezsht@genre.crustytoothpaste.net -[5] https://public-inbox.org/git/CAJo=hJtoX9=AyLHHpUJS7fueV9ciZ_MNpnEPHUz8Whui6g9F0A@mail.gmail.com/ +[1] http://lore.kernel.org/git/CA+55aFzJtejiCjV0e43+9oR3QuJK2PiFiLQemytoLpyJWe6P9w@mail.gmail.com/ +[2] http://lore.kernel.org/git/CA+55aFz+gkAsDZ24zmePQuEs1XPS9BP_s8O7Q4wQ7LV7X5-oDA@mail.gmail.com/ +[3] http://lore.kernel.org/git/20170306084353.nrns455dvkdsfgo5@sigill.intra.peff.net/ +[4] http://lore.kernel.org/git/20170304224936.rqqtkdvfjgyezsht@genre.crustytoothpaste.net +[5] https://lore.kernel.org/git/CAJo=hJtoX9=AyLHHpUJS7fueV9ciZ_MNpnEPHUz8Whui6g9F0A@mail.gmail.com/ diff --git a/Documentation/technical/index-format.txt b/Documentation/technical/index-format.txt index 7c4d67aa6a..faa25c5c52 100644 --- a/Documentation/technical/index-format.txt +++ b/Documentation/technical/index-format.txt @@ -318,7 +318,7 @@ The remaining data of each directory block is grouped by type: == End of Index Entry The End of Index Entry (EOIE) is used to locate the end of the variable - length index entries and the begining of the extensions. Code can take + length index entries and the beginning of the extensions. Code can take advantage of this to quickly locate the index extensions without having to parse through all of the index entries. @@ -351,7 +351,7 @@ The remaining data of each directory block is grouped by type: - A number of index offset entries each consisting of: - - 32-bit offset from the begining of the file to the first cache entry + - 32-bit offset from the beginning of the file to the first cache entry in this block of entries. - 32-bit count of cache entries in this block diff --git a/Documentation/technical/multi-pack-index.txt b/Documentation/technical/multi-pack-index.txt index d7e57639f7..1e31239696 100644 --- a/Documentation/technical/multi-pack-index.txt +++ b/Documentation/technical/multi-pack-index.txt @@ -102,8 +102,8 @@ Related Links [0] https://bugs.chromium.org/p/git/issues/detail?id=6 Chromium work item for: Multi-Pack Index (MIDX) -[1] https://public-inbox.org/git/20180107181459.222909-1-dstolee@microsoft.com/ +[1] https://lore.kernel.org/git/20180107181459.222909-1-dstolee@microsoft.com/ An earlier RFC for the multi-pack-index feature -[2] https://public-inbox.org/git/alpine.DEB.2.20.1803091557510.23109@alexmv-linux/ +[2] https://lore.kernel.org/git/alpine.DEB.2.20.1803091557510.23109@alexmv-linux/ Git Merge 2018 Contributor's summit notes (includes discussion of MIDX) diff --git a/Documentation/technical/pack-protocol.txt b/Documentation/technical/pack-protocol.txt index c73e72de0e..d5ce4eea8a 100644 --- a/Documentation/technical/pack-protocol.txt +++ b/Documentation/technical/pack-protocol.txt @@ -644,7 +644,7 @@ update was successful, or 'ng [refname] [error]' if the update was not. command-ok = PKT-LINE("ok" SP refname) command-fail = PKT-LINE("ng" SP refname SP error-msg) - error-msg = 1*(OCTECT) ; where not "ok" + error-msg = 1*(OCTET) ; where not "ok" ---- Updates can be unsuccessful for a number of reasons. The reference can have diff --git a/Documentation/technical/partial-clone.txt b/Documentation/technical/partial-clone.txt index 210373e258..b9e17e7a28 100644 --- a/Documentation/technical/partial-clone.txt +++ b/Documentation/technical/partial-clone.txt @@ -32,7 +32,7 @@ if/when needed. A remote that can later provide the missing objects is called a promisor remote, as it promises to send the objects when -requested. Initialy Git supported only one promisor remote, the origin +requested. Initially Git supported only one promisor remote, the origin remote from which the user cloned and that was configured in the "extensions.partialClone" config option. Later support for more than one promisor remote has been implemented. @@ -350,26 +350,26 @@ Related Links [0] https://crbug.com/git/2 Bug#2: Partial Clone -[1] https://public-inbox.org/git/20170113155253.1644-1-benpeart@microsoft.com/ + +[1] https://lore.kernel.org/git/20170113155253.1644-1-benpeart@microsoft.com/ + Subject: [RFC] Add support for downloading blobs on demand + Date: Fri, 13 Jan 2017 10:52:53 -0500 -[2] https://public-inbox.org/git/cover.1506714999.git.jonathantanmy@google.com/ + +[2] https://lore.kernel.org/git/cover.1506714999.git.jonathantanmy@google.com/ + Subject: [PATCH 00/18] Partial clone (from clone to lazy fetch in 18 patches) + Date: Fri, 29 Sep 2017 13:11:36 -0700 -[3] https://public-inbox.org/git/20170426221346.25337-1-jonathantanmy@google.com/ + +[3] https://lore.kernel.org/git/20170426221346.25337-1-jonathantanmy@google.com/ + Subject: Proposal for missing blob support in Git repos + Date: Wed, 26 Apr 2017 15:13:46 -0700 -[4] https://public-inbox.org/git/1488999039-37631-1-git-send-email-git@jeffhostetler.com/ + +[4] https://lore.kernel.org/git/1488999039-37631-1-git-send-email-git@jeffhostetler.com/ + Subject: [PATCH 00/10] RFC Partial Clone and Fetch + Date: Wed, 8 Mar 2017 18:50:29 +0000 -[5] https://public-inbox.org/git/20170505152802.6724-1-benpeart@microsoft.com/ + +[5] https://lore.kernel.org/git/20170505152802.6724-1-benpeart@microsoft.com/ + Subject: [PATCH v7 00/10] refactor the filter process code into a reusable module + Date: Fri, 5 May 2017 11:27:52 -0400 -[6] https://public-inbox.org/git/20170714132651.170708-1-benpeart@microsoft.com/ + +[6] https://lore.kernel.org/git/20170714132651.170708-1-benpeart@microsoft.com/ + Subject: [RFC/PATCH v2 0/1] Add support for downloading blobs on demand + Date: Fri, 14 Jul 2017 09:26:50 -0400 diff --git a/Documentation/technical/protocol-v2.txt b/Documentation/technical/protocol-v2.txt index 40f91f6b1e..7e3766cafb 100644 --- a/Documentation/technical/protocol-v2.txt +++ b/Documentation/technical/protocol-v2.txt @@ -252,7 +252,7 @@ A `fetch` request can take the following arguments: ofs-delta Indicate that the client understands PACKv2 with delta referring to its base by position in pack rather than by an oid. That is, - they can read OBJ_OFS_DELTA (ake type 6) in a packfile. + they can read OBJ_OFS_DELTA (aka type 6) in a packfile. If the 'shallow' feature is advertised the following arguments can be included in the clients request as well as the potential addition of the diff --git a/Documentation/technical/racy-git.txt b/Documentation/technical/racy-git.txt index 4a8be4d144..ceda4bbfda 100644 --- a/Documentation/technical/racy-git.txt +++ b/Documentation/technical/racy-git.txt @@ -51,7 +51,7 @@ of git://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git only fixes the issue for file systems with exactly 1 ns or 1 s resolution. Other file systems are still broken in current Linux kernels (e.g. CEPH, CIFS, NTFS, UDF), see -https://lkml.org/lkml/2015/6/9/714 +https://lore.kernel.org/lkml/5577240D.7020309@gmail.com/ Racy Git -------- diff --git a/Documentation/technical/rerere.txt b/Documentation/technical/rerere.txt index aa22d7ace8..af5f9fc24f 100644 --- a/Documentation/technical/rerere.txt +++ b/Documentation/technical/rerere.txt @@ -117,7 +117,7 @@ early A became C or B, a late X became Y or Z". We can see there are 4 combinations of ("B or C", "C or B") x ("X or Y", "Y or X"). By sorting, the conflict is given its canonical name, namely, "an -early part became B or C, a late part becames X or Y", and whenever +early part became B or C, a late part became X or Y", and whenever any of these four patterns appear, and we can get to the same conflict and resolution that we saw earlier. diff --git a/Documentation/urls.txt b/Documentation/urls.txt index bc354fe2dc..1c229d7581 100644 --- a/Documentation/urls.txt +++ b/Documentation/urls.txt @@ -53,6 +53,9 @@ These two syntaxes are mostly equivalent, except the former implies --local option. endif::git-clone[] +'git clone', 'git fetch' and 'git pull', but not 'git push', will also +accept a suitable bundle file. See linkgit:git-bundle[1]. + When Git doesn't know how to handle a certain transport protocol, it attempts to use the 'remote-<transport>' remote helper, if one exists. To explicitly request a remote helper, the following syntax diff --git a/Documentation/user-manual.txt b/Documentation/user-manual.txt index 06bd8994ee..833652983f 100644 --- a/Documentation/user-manual.txt +++ b/Documentation/user-manual.txt @@ -4574,5 +4574,5 @@ Write a chapter on using plumbing and writing scripts. Alternates, clone -reference, etc. More on recovery from repository corruption. See: - http://marc.info/?l=git&m=117263864820799&w=2 - http://marc.info/?l=git&m=117147855503798&w=2 + https://lore.kernel.org/git/Pine.LNX.4.64.0702272039540.12485@woody.linux-foundation.org/ + https://lore.kernel.org/git/Pine.LNX.4.64.0702141033400.3604@woody.linux-foundation.org/ |