diff options
Diffstat (limited to 'Documentation')
| -rw-r--r-- | Documentation/RelNotes/1.7.8.1.txt | 29 | ||||
| -rw-r--r-- | Documentation/config.txt | 19 | ||||
| -rw-r--r-- | Documentation/git-fsck.txt | 26 | ||||
| -rw-r--r-- | Documentation/git-mv.txt | 8 | ||||
| -rw-r--r-- | Documentation/git-sh-setup.txt | 10 | ||||
| -rw-r--r-- | Documentation/git-stripspace.txt | 69 |
6 files changed, 120 insertions, 41 deletions
diff --git a/Documentation/RelNotes/1.7.8.1.txt b/Documentation/RelNotes/1.7.8.1.txt index 0e8bd9f5ee..33dc948b94 100644 --- a/Documentation/RelNotes/1.7.8.1.txt +++ b/Documentation/RelNotes/1.7.8.1.txt @@ -1,17 +1,38 @@ Git v1.7.8.1 Release Notes ========================== -Fixes since v1.7.8.1 --------------------- +Fixes since v1.7.8 +------------------ * In some codepaths (notably, checkout and merge), the ignore patterns recorded in $GIT_DIR/info/exclude were not honored. They now are. - * After fetching from a remote that has very long refname, the reporting - output could have corrupted by overrunning a static buffer. + * "git apply --check" did not error out when given an empty input + without any patch. + + * "git archive" mistakenly allowed remote clients to ask for commits + that are not at the tip of any ref. * "git checkout" and "git merge" treated in-tree .gitignore and exclude file in $GIT_DIR/info/ directory inconsistently when deciding which untracked files are ignored and expendable. + * LF-to-CRLF streaming filter used when checking out a large-ish blob + fell into an infinite loop with a rare input. + + * The function header pattern for files with "diff=cpp" attribute did + not consider "type *funcname(type param1,..." as the beginning of a + function. + + * The error message from "git diff" and "git status" when they fail + to inspect changes in submodules did not report which submodule they + had trouble with. + + * After fetching from a remote that has very long refname, the reporting + output could have corrupted by overrunning a static buffer. + + * "git pack-objects" avoids creating cyclic dependencies among deltas + when seeing a broken packfile that records the same object in both + the deflated form and as a delta. + Also contains minor fixes and documentation updates. diff --git a/Documentation/config.txt b/Documentation/config.txt index 5a841da6d4..f22d926777 100644 --- a/Documentation/config.txt +++ b/Documentation/config.txt @@ -115,35 +115,32 @@ in the appropriate manual page. You will find a description of non-core porcelain configuration variables in the respective porcelain documentation. advice.*:: - When set to 'true', display the given optional help message. - When set to 'false', do not display. The configuration variables - are: + These variables control various optional help messages designed to + aid new users. All 'advice.*' variables default to 'true', and you + can tell Git that you do not need help by setting these to 'false': + -- pushNonFastForward:: Advice shown when linkgit:git-push[1] refuses - non-fast-forward refs. Default: true. + non-fast-forward refs. statusHints:: Directions on how to stage/unstage/add shown in the output of linkgit:git-status[1] and the template shown - when writing commit messages. Default: true. + when writing commit messages. commitBeforeMerge:: Advice shown when linkgit:git-merge[1] refuses to merge to avoid overwriting local changes. - Default: true. resolveConflict:: Advices shown by various commands when conflicts prevent the operation from being performed. - Default: true. implicitIdentity:: Advice on how to set your identity configuration when your information is guessed from the system username and - domain name. Default: true. - + domain name. detachedHead:: - Advice shown when you used linkgit::git-checkout[1] to + Advice shown when you used linkgit:git-checkout[1] to move to the detach HEAD state, to instruct how to create - a local branch after the fact. Default: true. + a local branch after the fact. -- core.fileMode:: diff --git a/Documentation/git-fsck.txt b/Documentation/git-fsck.txt index a2a508dc28..55b33d7031 100644 --- a/Documentation/git-fsck.txt +++ b/Documentation/git-fsck.txt @@ -72,30 +72,20 @@ index file, all SHA1 references in .git/refs/*, and all reflogs (unless a blob, the contents are written into the file, rather than its object name. -It tests SHA1 and general object sanity, and it does full tracking of -the resulting reachability and everything else. It prints out any -corruption it finds (missing or bad objects), and if you use the -'--unreachable' flag it will also print out objects that exist but -that aren't reachable from any of the specified head nodes. - -So for example - - git fsck --unreachable HEAD \ - $(git for-each-ref --format="%(objectname)" refs/heads) +DISCUSSION +---------- -will do quite a _lot_ of verification on the tree. There are a few -extra validity tests to be added (make sure that tree objects are -sorted properly etc), but on the whole if 'git fsck' is happy, you -do have a valid tree. +git-fsck tests SHA1 and general object sanity, and it does full tracking +of the resulting reachability and everything else. It prints out any +corruption it finds (missing or bad objects), and if you use the +'--unreachable' flag it will also print out objects that exist but that +aren't reachable from any of the specified head nodes (or the default +set, as mentioned above). Any corrupt objects you will have to find in backups or other archives (i.e., you can just remove them and do an 'rsync' with some other site in the hopes that somebody else has the object you have corrupted). -Of course, "valid tree" doesn't mean that it wasn't generated by some -evil person, and the end result might be crap. git is a revision -tracking system, not a quality assurance system ;) - Extracted Diagnostics --------------------- diff --git a/Documentation/git-mv.txt b/Documentation/git-mv.txt index b8db373964..e3c8448614 100644 --- a/Documentation/git-mv.txt +++ b/Documentation/git-mv.txt @@ -15,8 +15,8 @@ DESCRIPTION ----------- This script is used to move or rename a file, directory or symlink. - git mv [-f] [-n] <source> <destination> - git mv [-f] [-n] [-k] <source> ... <destination directory> + git mv [-v] [-f] [-n] [-k] <source> <destination> + git mv [-v] [-f] [-n] [-k] <source> ... <destination directory> In the first form, it renames <source>, which must exist and be either a file, symlink or directory, to <destination>. @@ -40,6 +40,10 @@ OPTIONS --dry-run:: Do nothing; only show what would happen +-v:: +--verbose:: + Report the names of files as they are moved. + GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-sh-setup.txt b/Documentation/git-sh-setup.txt index a2f346ca71..5e5f1c8964 100644 --- a/Documentation/git-sh-setup.txt +++ b/Documentation/git-sh-setup.txt @@ -68,6 +68,16 @@ require_work_tree_exists:: cd_to_toplevel, which is impossible to do if there is no working tree. +require_clean_work_tree <action> [<hint>]:: + checks that the working tree and index associated with the + repository have no uncommitted changes to tracked files. + Otherwise it emits an error message of the form `Cannot + <action>: <reason>. <hint>`, and dies. Example: ++ +---------------- +require_clean_work_tree rebase "Please commit or stash them." +---------------- + get_author_ident_from_commit:: outputs code for use with eval to set the GIT_AUTHOR_NAME, GIT_AUTHOR_EMAIL and GIT_AUTHOR_DATE variables for a given commit. diff --git a/Documentation/git-stripspace.txt b/Documentation/git-stripspace.txt index b78f031cd4..a80d94650d 100644 --- a/Documentation/git-stripspace.txt +++ b/Documentation/git-stripspace.txt @@ -3,26 +3,83 @@ git-stripspace(1) NAME ---- -git-stripspace - Filter out empty lines +git-stripspace - Remove unnecessary whitespace SYNOPSIS -------- [verse] -'git stripspace' [-s | --strip-comments] < <stream> +'git stripspace' [-s | --strip-comments] < input DESCRIPTION ----------- -Remove multiple empty lines, and empty lines at beginning and end. + +Clean the input in the manner used by 'git' for text such as commit +messages, notes, tags and branch descriptions. + +With no arguments, this will: + +- remove trailing whitespace from all lines +- collapse multiple consecutive empty lines into one empty line +- remove empty lines from the beginning and end of the input +- add a missing '\n' to the last line if necessary. + +In the case where the input consists entirely of whitespace characters, no +output will be produced. + +*NOTE*: This is intended for cleaning metadata, prefer the `--whitespace=fix` +mode of linkgit:git-apply[1] for correcting whitespace of patches or files in +the repository. OPTIONS ------- -s:: --strip-comments:: - In addition to empty lines, also strip lines starting with '#'. + Skip and remove all lines starting with '#'. + +EXAMPLES +-------- + +Given the following noisy input with '$' indicating the end of a line: -<stream>:: - Byte stream to act on. +-------- +|A brief introduction $ +| $ +|$ +|A new paragraph$ +|# with a commented-out line $ +|explaining lots of stuff.$ +|$ +|# An old paragraph, also commented-out. $ +| $ +|The end.$ +| $ +--------- + +Use 'git stripspace' with no arguments to obtain: + +-------- +|A brief introduction$ +|$ +|A new paragraph$ +|# with a commented-out line$ +|explaining lots of stuff.$ +|$ +|# An old paragraph, also commented-out.$ +|$ +|The end.$ +--------- + +Use 'git stripspace --strip-comments' to obtain: + +-------- +|A brief introduction$ +|$ +|A new paragraph$ +|explaining lots of stuff.$ +|$ +|The end.$ +--------- GIT --- |