diff options
Diffstat (limited to 'Documentation')
| -rw-r--r-- | Documentation/RelNotes/1.7.11.2.txt | 53 | ||||
| -rw-r--r-- | Documentation/RelNotes/1.7.12.txt | 115 | ||||
| -rw-r--r-- | Documentation/config.txt | 40 | ||||
| -rw-r--r-- | Documentation/git-config.txt | 17 | ||||
| -rw-r--r-- | Documentation/git-credential.txt | 144 | ||||
| -rw-r--r-- | Documentation/git-p4.txt | 10 | ||||
| -rw-r--r-- | Documentation/git-rebase.txt | 45 | ||||
| -rw-r--r-- | Documentation/git.txt | 3 | ||||
| -rw-r--r-- | Documentation/gitattributes.txt | 2 | ||||
| -rw-r--r-- | Documentation/gitignore.txt | 4 | ||||
| -rw-r--r-- | Documentation/technical/api-credentials.txt | 39 |
11 files changed, 390 insertions, 82 deletions
diff --git a/Documentation/RelNotes/1.7.11.2.txt b/Documentation/RelNotes/1.7.11.2.txt new file mode 100644 index 0000000000..a0d24d1270 --- /dev/null +++ b/Documentation/RelNotes/1.7.11.2.txt @@ -0,0 +1,53 @@ +Git v1.7.11.2 Release Notes +=========================== + +Fixes since v1.7.11.1 +--------------------- + + * On Cygwin, the platform pread(2) is not thread safe, just like our + own compat/ emulation, and cannot be used in the index-pack + program. Makefile variable NO_THREAD_SAFE_PREAD can be defined to + avoid use of this function in a threaded program. + + * "git add" allows adding a regular file to the path where a + submodule used to exist, but "git update-index" does not allow an + equivalent operation to Porcelain writers. + + * "git archive" incorrectly computed the header checksum; the symptom + was observed only when using pathnames with hi-bit set. + + * "git blame" did not try to make sure that the abbreviated commit + object names in its output are unique. + + * Running "git bundle verify" on a bundle that records a complete + history said "it requires these 0 commits". + + * "git clone --single-branch" to clone a single branch did not limit + the cloning to the specified branch. + + * "git diff --no-index" did not correctly handle relative paths and + did not correctly give exit codes when run under "--quiet" option. + + * "git diff --no-index" did not work with pagers correctly. + + * "git diff COPYING HEAD:COPYING" gave a nonsense error message that + claimed that the treeish HEAD did not have COPYING in it. + + * When "git log" gets "--simplify-merges/by-decoration" together with + "--first-parent", the combination of these options makes the + simplification logic to use in-core commit objects that haven't + been examined for relevance, either producing incorrect result or + taking too long to produce any output. Teach the simplification + logic to ignore commits that the first-parent traversal logic + ignored when both are in effect to work around the issue. + + * "git ls-files --exclude=t -i" did not consider anything under t/ as + excluded, as it did not pay attention to exclusion of leading paths + while walking the index. Other two users of excluded() are also + updated. + + * "git request-pull $url dev" when the tip of "dev" branch was tagged + with "ext4-for-linus" used the contents from the tag in the output + but still asked the "dev" branch to be pulled, not the tag. + +Also contains minor typofixes and documentation updates. diff --git a/Documentation/RelNotes/1.7.12.txt b/Documentation/RelNotes/1.7.12.txt index 79cbb564c3..067c476e3c 100644 --- a/Documentation/RelNotes/1.7.12.txt +++ b/Documentation/RelNotes/1.7.12.txt @@ -6,6 +6,25 @@ Updates since v1.7.11 UI, Workflows & Features + * Git can be told to normalize pathnames it read from readdir(3) and + all arguments it got from the command line into precomposed UTF-8 + (assuming that they come as decomposed UTF-8), in order to work + around issues on Mac OS. + + I think there still are other places that need conversion + (e.g. paths that are read from stdin for some commands), but this + should be a good first step in the right direction. + + * Per-user $HOME/.gitconfig file can optionally be stored in + $HOME/.config/git/config instead, which is in line with XDG. + + * The value of core.attributesfile and core.excludesfile default to + $HOME/.config/attributes and $HOME/.config/ignore respectively when + these files exist. + + * Scripted Porcelain writers now have access to the credential API via + the "git credential" plumbing command. + * "git help" used to always default to "man" format even on platforms where "man" viewer is not widely available. @@ -16,13 +35,45 @@ UI, Workflows & Features turn this off, as a more explicit alternative over use of file:// URL. + * "git fetch" and friends used to say "remote side hung up + unexpectedly" when they failed to get response they expect from the + other side, but one common reason why they don't get expected + response is that the remote repository does not exist or cannot be + read. The error message in this case was updated to give better + hints to the user. + * git native protocol agents learned to show software version over the wire, so that the server log can be examined to see the vintage distribution of clients. + * "git help -w $cmd" can show HTML version of documentation for + "git-$cmd" by setting help.htmlpath to somewhere other than the + default location where the build procedure installs them locally; + the variable can even point at a http:// URL. + + * "git rebase -i" learned "-x <cmd>" to insert "exec <cmd>" after + each commit in the resulting history. + + * "git status" gives finer classification to various states of paths + in conflicted state and offer advice messages in its output. + + * "git submodule" learned to deal with nested submodule structure + where a module is contained within a module whose origin is + specified as a relative URL to its superproject's origin. + + * A rather heavy-ish "git completion" script has been split to create + a separate "git prompting" script, to help lazy-autoloading of the + completion part while making prompting part always available. + Foreign Interface + * "mediawiki" remote helper (in contrib/) learned to handle file + attachments. + + * vcs-svn has been updated to clean-up compilation, lift 32-bit + limitations, etc. + Performance, Internal Implementation, etc. (please report possible regressions) @@ -31,6 +82,19 @@ Performance, Internal Implementation, etc. (please report possible regressions) * We no longer use AsciiDoc7 syntax in our documentation and favor a more modern style. + * "git am --rebasing" codepath was taught to grab authorship, log + message and the patch text directly out of existing commits. This + will help rebasing commits that have confusing "diff" output in + their log messages. + + * "git index-pack" and "git pack-objects" use streaming API to read + from the object store to avoid having to hold a large blob object + in-core while they are doing their thing. + + * Code to match paths with exclude patterns learned to avoid calling + fnmatch() by comparing fixed leading substring literally when + possible. + Also contains minor documentation updates and code clean-ups. @@ -42,24 +106,33 @@ Unless otherwise noted, all the fixes since v1.7.11 in the maintenance releases are contained in this release (see release notes to them for details). - * The documentation for "git cherry-pick A B..C" was misleading. - (merge b98878e cn/cherry-pick-range-docs later to maint). - - * "git archive" incorrectly computed the header checksum; the symptom - was observed only when using pathnames with hi-bit set. - (merge a5a46eb jc/ustar-checksum-is-unsigned later to maint). - - * Running "git bundle verify" on a bundle that records a complete - history said "it requires these 0 commits". - (merge 8c3710f jc/bundle-complete-notice later to maint). - - * "git ls-files --exclude=t -i" did not consider anything under t/ as - excluded, as it did not pay attention to exclusion of leading paths - while walking the index. Other two users of excluded() are also - updated. - (merge 0d316f0 jc/ls-files-i-dir later to maint). - - * "git request-pull $url dev" when the tip of "dev" branch was tagged - with "ext4-for-linus" used the contents from the tag in the output - but still asked the "dev" branch to be pulled, not the tag. - (merge 682853e jc/request-pull-match-tagname later to maint). + * "git show"'s auto-walking behaviour was an unreliable and + unpredictable hack; it now behaves just like "git log" does when it + walks. + (merge c5941f1 tr/maint-show-walk later to maint). + + * "git diff", "git status" and anything that internally uses the + comparison machinery was utterly broken when the difference + involved a file with "-" as its name. This was due to the way "git + diff --no-index" was incorrectly bolted on to the system, making + any comparison that involves a file "-" at the root level + incorrectly read from the standard input. + (merge 4682d85 jc/refactor-diff-stdin later to maint). + + * We did not have test to make sure "git rebase" without extra options + filters out an empty commit in the original history. + (merge 2b5ba7b mz/empty-rebase-test later to maint). + + * "git fast-export" produced an input stream for fast-import without + properly quoting pathnames when they contain SPs in them. + (merge ff59f6d js/fast-export-paths-with-spaces later to maint). + + * "git checkout --detach", when you are still on an unborn branch, + should be forbidden, but it wasn't. + (merge 8ced1aa cw/no-detaching-an-unborn later to maint). + + * Some implementations of Perl terminates "lines" with CRLF even when + the script is operating on just a sequence of bytes. Make sure to + use "$PERL_PATH", the version of Perl the user told Git to use, in + our tests to avoid unnecessary breakages in tests. + (merge ad78585 vr/use-our-perl-in-tests later to maint). diff --git a/Documentation/config.txt b/Documentation/config.txt index 915cb5a547..7bc0e53848 100644 --- a/Documentation/config.txt +++ b/Documentation/config.txt @@ -159,9 +159,10 @@ advice.*:: specified a refspec that isn't your current branch) and it resulted in a non-fast-forward error. statusHints:: - Directions on how to stage/unstage/add shown in the - output of linkgit:git-status[1] and the template shown - when writing commit messages. + Show directions on how to proceed from the current + state in the output of linkgit:git-status[1] and in + the template shown when writing commit messages in + linkgit:git-commit[1]. commitBeforeMerge:: Advice shown when linkgit:git-merge[1] refuses to merge to avoid overwriting local changes. @@ -210,6 +211,15 @@ The default is false, except linkgit:git-clone[1] or linkgit:git-init[1] will probe and set core.ignorecase true if appropriate when the repository is created. +core.precomposeunicode:: + This option is only used by Mac OS implementation of git. + When core.precomposeunicode=true, git reverts the unicode decomposition + of filenames done by Mac OS. This is useful when sharing a repository + between Mac OS and Linux or Windows. + (Git for Windows 1.7.10 or higher is needed, or git under cygwin 1.7). + When false, file names are handled fully transparent by git, + which is backward compatible with older versions of git. + core.trustctime:: If false, the ctime differences between the index and the working tree are ignored; useful when the inode change time @@ -483,7 +493,9 @@ core.excludesfile:: '.git/info/exclude', git looks into this file for patterns of files which are not meant to be tracked. "`~/`" is expanded to the value of `$HOME` and "`~user/`" to the specified user's - home directory. See linkgit:gitignore[5]. + home directory. Its default value is $XDG_CONFIG_HOME/git/ignore. + If $XDG_CONFIG_HOME is either not set or empty, $HOME/.config/git/ignore + is used instead. See linkgit:gitignore[5]. core.askpass:: Some commands (e.g. svn and http interfaces) that interactively @@ -498,7 +510,9 @@ core.attributesfile:: In addition to '.gitattributes' (per-directory) and '.git/info/attributes', git looks into this file for attributes (see linkgit:gitattributes[5]). Path expansions are made the same - way as for `core.excludesfile`. + way as for `core.excludesfile`. Its default value is + $XDG_CONFIG_HOME/git/attributes. If $XDG_CONFIG_HOME is either not + set or empty, $HOME/.config/git/attributes is used instead. core.editor:: Commands such as `commit` and `tag` that lets you edit @@ -880,7 +894,7 @@ column.ui:: make equal size columns -- + - This option defaults to 'never'. +This option defaults to 'never'. column.branch:: Specify whether to output branch listing in `git branch` in columns. @@ -1720,6 +1734,7 @@ push.default:: no refspec is implied by any of the options given on the command line. Possible values are: + +-- * `nothing` - do not push anything. * `matching` - push all branches having the same name in both ends. This is for those who prepare all the branches into a publishable @@ -1739,12 +1754,13 @@ push.default:: option and is well-suited for beginners. It will become the default in Git 2.0. * `current` - push the current branch to a branch of the same name. - + - The `simple`, `current` and `upstream` modes are for those who want to - push out a single branch after finishing work, even when the other - branches are not yet ready to be pushed out. If you are working with - other people to push into the same shared repository, you would want - to use one of these. +-- ++ +The `simple`, `current` and `upstream` modes are for those who want to +push out a single branch after finishing work, even when the other +branches are not yet ready to be pushed out. If you are working with +other people to push into the same shared repository, you would want +to use one of these. rebase.stat:: Whether to show a diffstat of what changed upstream since the last diff --git a/Documentation/git-config.txt b/Documentation/git-config.txt index d9463cb387..2d6ef32a08 100644 --- a/Documentation/git-config.txt +++ b/Documentation/git-config.txt @@ -97,10 +97,11 @@ OPTIONS --global:: For writing options: write to global ~/.gitconfig file rather than - the repository .git/config. + the repository .git/config, write to $XDG_CONFIG_HOME/git/config file + if this file exists and the ~/.gitconfig file doesn't. + -For reading options: read only from global ~/.gitconfig rather than -from all available files. +For reading options: read only from global ~/.gitconfig and from +$XDG_CONFIG_HOME/git/config rather than from all available files. + See also <<FILES>>. @@ -194,7 +195,7 @@ See also <<FILES>>. FILES ----- -If not set explicitly with '--file', there are three files where +If not set explicitly with '--file', there are four files where 'git config' will search for configuration options: $GIT_DIR/config:: @@ -204,6 +205,14 @@ $GIT_DIR/config:: User-specific configuration file. Also called "global" configuration file. +$XDG_CONFIG_HOME/git/config:: + Second user-specific configuration file. If $XDG_CONFIG_HOME is not set + or empty, $HOME/.config/git/config will be used. Any single-valued + variable set in this file will be overwritten by whatever is in + ~/.gitconfig. It is a good idea not to create this file if + you sometimes use older versions of Git, as support for this + file was added fairly recently. + $(prefix)/etc/gitconfig:: System-wide configuration file. diff --git a/Documentation/git-credential.txt b/Documentation/git-credential.txt new file mode 100644 index 0000000000..a81684e15f --- /dev/null +++ b/Documentation/git-credential.txt @@ -0,0 +1,144 @@ +git-credential(1) +================= + +NAME +---- +git-credential - retrieve and store user credentials + +SYNOPSIS +-------- +------------------ +git credential <fill|approve|reject> +------------------ + +DESCRIPTION +----------- + +Git has an internal interface for storing and retrieving credentials +from system-specific helpers, as well as prompting the user for +usernames and passwords. The git-credential command exposes this +interface to scripts which may want to retrieve, store, or prompt for +credentials in the same manner as git. The design of this scriptable +interface models the internal C API; see +link:technical/api-credentials.txt[the git credential API] for more +background on the concepts. + +git-credential takes an "action" option on the command-line (one of +`fill`, `approve`, or `reject`) and reads a credential description +on stdin (see <<IOFMT,INPUT/OUTPUT FORMAT>>). + +If the action is `fill`, git-credential will attempt to add "username" +and "password" attributes to the description by reading config files, +by contacting any configured credential helpers, or by prompting the +user. The username and password attributes of the credential +description are then printed to stdout together with the attributes +already provided. + +If the action is `approve`, git-credential will send the description +to any configured credential helpers, which may store the credential +for later use. + +If the action is `reject`, git-credential will send the description to +any configured credential helpers, which may erase any stored +credential matching the description. + +If the action is `approve` or `reject`, no output should be emitted. + +TYPICAL USE OF GIT CREDENTIAL +----------------------------- + +An application using git-credential will typically use `git +credential` following these steps: + + 1. Generate a credential description based on the context. ++ +For example, if we want a password for +`https://example.com/foo.git`, we might generate the following +credential description (don't forget the blank line at the end; it +tells `git credential` that the application finished feeding all the +infomation it has): + + protocol=https + host=example.com + path=foo.git + + 2. Ask git-credential to give us a username and password for this + description. This is done by running `git credential fill`, + feeding the description from step (1) to its standard input. The complete + credential description (including the credential per se, i.e. the + login and password) will be produced on standard output, like: + + protocol=https + host=example.com + username=bob + password=secr3t ++ +In most cases, this means the attributes given in the input will be +repeated in the output, but git may also modify the credential +description, for example by removing the `path` attribute when the +protocol is HTTP(s) and `credential.useHttpPath` is false. ++ +If the `git credential` knew about the password, this step may +not have involved the user actually typing this password (the +user may have typed a password to unlock the keychain instead, +or no user interaction was done if the keychain was already +unlocked) before it returned `password=secr3t`. + + 3. Use the credential (e.g., access the URL with the username and + password from step (2)), and see if it's accepted. + + 4. Report on the success or failure of the password. If the + credential allowed the operation to complete successfully, then + it can be marked with an "approve" action to tell `git + credential` to reuse it in its next invocation. If the credential + was rejected during the operation, use the "reject" action so + that `git credential` will ask for a new password in its next + invocation. In either case, `git credential` should be fed with + the credential description obtained from step (2) (which also + contain the ones provided in step (1)). + +[[IOFMT]] +INPUT/OUTPUT FORMAT +------------------- + +`git credential` reads and/or writes (depending on the action used) +credential information in its standard input/output. These information +can correspond either to keys for which `git credential` will obtain +the login/password information (e.g. host, protocol, path), or to the +actual credential data to be obtained (login/password). + +The credential is split into a set of named attributes. +Attributes are provided to the helper, one per line. Each attribute is +specified by a key-value pair, separated by an `=` (equals) sign, +followed by a newline. The key may contain any bytes except `=`, +newline, or NUL. The value may contain any bytes except newline or NUL. +In both cases, all bytes are treated as-is (i.e., there is no quoting, +and one cannot transmit a value with newline or NUL in it). The list of +attributes is terminated by a blank line or end-of-file. +Git will send the following attributes (but may not send all of +them for a given credential; for example, a `host` attribute makes no +sense when dealing with a non-network protocol): + +`protocol`:: + + The protocol over which the credential will be used (e.g., + `https`). + +`host`:: + + The remote hostname for a network credential. + +`path`:: + + The path with which the credential will be used. E.g., for + accessing a remote https repository, this will be the + repository's path on the server. + +`username`:: + + The credential's username, if we already have one (e.g., from a + URL, from the user, or from a previously run helper). + +`password`:: + + The credential's password, if we are asking it to be stored. diff --git a/Documentation/git-p4.txt b/Documentation/git-p4.txt index fe1f49bc6f..8228f33e3f 100644 --- a/Documentation/git-p4.txt +++ b/Documentation/git-p4.txt @@ -255,7 +255,7 @@ These options can be used to modify 'git p4 submit' behavior. p4. By default, this is the most recent p4 commit reachable from 'HEAD'. --M[<n>]:: +-M:: Detect renames. See linkgit:git-diff[1]. Renames will be represented in p4 using explicit 'move' operations. There is no corresponding option to detect copies, but there are @@ -465,13 +465,15 @@ git-p4.useClientSpec:: Submit variables ~~~~~~~~~~~~~~~~ git-p4.detectRenames:: - Detect renames. See linkgit:git-diff[1]. + Detect renames. See linkgit:git-diff[1]. This can be true, + false, or a score as expected by 'git diff -M'. git-p4.detectCopies:: - Detect copies. See linkgit:git-diff[1]. + Detect copies. See linkgit:git-diff[1]. This can be true, + false, or a score as expected by 'git diff -C'. git-p4.detectCopiesHarder:: - Detect copies harder. See linkgit:git-diff[1]. + Detect copies harder. See linkgit:git-diff[1]. A boolean. git-p4.preserveUser:: On submit, re-author changes to reflect the git author, diff --git a/Documentation/git-rebase.txt b/Documentation/git-rebase.txt index 85b5e4425c..b30ed352e5 100644 --- a/Documentation/git-rebase.txt +++ b/Documentation/git-rebase.txt @@ -8,9 +8,9 @@ git-rebase - Forward-port local commits to the updated upstream head SYNOPSIS -------- [verse] -'git rebase' [-i | --interactive] [options] [--onto <newbase>] +'git rebase' [-i | --interactive] [options] [--exec <cmd>] [--onto <newbase>] [<upstream>] [<branch>] -'git rebase' [-i | --interactive] [options] [--onto <newbase>] +'git rebase' [-i | --interactive] [options] [--exec <cmd>] [--onto <newbase>] --root [<branch>] 'git rebase' --continue | --skip | --abort @@ -210,7 +210,7 @@ rebase.autosquash:: OPTIONS ------- -<newbase>:: +--onto <newbase>:: Starting point at which to create the new commits. If the --onto option is not specified, the starting point is <upstream>. May be any valid commit, and not just an @@ -344,6 +344,27 @@ This uses the `--interactive` machinery internally, but combining it with the `--interactive` option explicitly is generally not a good idea unless you know what you are doing (see BUGS below). +-x <cmd>:: +--exec <cmd>:: + Append "exec <cmd>" after each line creating a commit in the + final history. <cmd> will be interpreted as one or more shell + commands. ++ +This option can only be used with the `--interactive` option +(see INTERACTIVE MODE below). ++ +You may execute several commands by either using one instance of `--exec` +with several commands: ++ + git rebase -i --exec "cmd1 && cmd2 && ..." ++ +or by giving more than one `--exec`: ++ + git rebase -i --exec "cmd1" --exec "cmd2" --exec ... ++ +If `--autosquash` is used, "exec" lines will not be appended for +the intermediate commits, and will only appear at the end of each +squash/fixup series. --root:: Rebase all commits reachable from <branch>, instead of @@ -522,6 +543,24 @@ in `$SHELL`, or the default shell if `$SHELL` is not set), so you can use shell features (like "cd", ">", ";" ...). The command is run from the root of the working tree. +---------------------------------- +$ git rebase -i --exec "make test" +---------------------------------- + +This command lets you check that intermediate commits are compilable. +The todo list becomes like that: + +-------------------- +pick 5928aea one +exec make test +pick 04d0fda two +exec make test +pick ba46169 three +exec make test +pick f4593f9 four +exec make test +-------------------- + SPLITTING COMMITS ----------------- diff --git a/Documentation/git.txt b/Documentation/git.txt index d58fad71bd..43f9a1bebd 100644 --- a/Documentation/git.txt +++ b/Documentation/git.txt @@ -44,9 +44,10 @@ unreleased) version of git, that is available from 'master' branch of the `git.git` repository. Documentation for older releases are available here: -* link:v1.7.11.1/git.html[documentation for release 1.7.11.1] +* link:v1.7.11.2/git.html[documentation for release 1.7.11.2] * release notes for + link:RelNotes/1.7.11.2.txt[1.7.11.2], link:RelNotes/1.7.11.1.txt[1.7.11.1], link:RelNotes/1.7.11.txt[1.7.11]. diff --git a/Documentation/gitattributes.txt b/Documentation/gitattributes.txt index 80120ea14f..e16f3e175b 100644 --- a/Documentation/gitattributes.txt +++ b/Documentation/gitattributes.txt @@ -75,6 +75,8 @@ repositories (i.e., attributes of interest to all users) should go into `.gitattributes` files. Attributes that should affect all repositories for a single user should be placed in a file specified by the `core.attributesfile` configuration option (see linkgit:git-config[1]). +Its default value is $XDG_CONFIG_HOME/git/attributes. If $XDG_CONFIG_HOME +is either not set or empty, $HOME/.config/git/attributes is used instead. Attributes for all users on a system should be placed in the `$(prefix)/etc/gitattributes` file. diff --git a/Documentation/gitignore.txt b/Documentation/gitignore.txt index 2e7328b830..c1f692a71e 100644 --- a/Documentation/gitignore.txt +++ b/Documentation/gitignore.txt @@ -50,7 +50,9 @@ the repository but are specific to one user's workflow) should go into the `$GIT_DIR/info/exclude` file. Patterns which a user wants git to ignore in all situations (e.g., backup or temporary files generated by the user's editor of choice) generally go into a file specified by -`core.excludesfile` in the user's `~/.gitconfig`. +`core.excludesfile` in the user's `~/.gitconfig`. Its default value is +$XDG_CONFIG_HOME/git/ignore. If $XDG_CONFIG_HOME is either not set or empty, +$HOME/.config/git/ignore is used instead. The underlying git plumbing tools, such as 'git ls-files' and 'git read-tree', read diff --git a/Documentation/technical/api-credentials.txt b/Documentation/technical/api-credentials.txt index adb6f0c896..5977b58e57 100644 --- a/Documentation/technical/api-credentials.txt +++ b/Documentation/technical/api-credentials.txt @@ -241,42 +241,9 @@ appended to its command line, which is one of: Remove a matching credential, if any, from the helper's storage. The details of the credential will be provided on the helper's stdin -stream. The credential is split into a set of named attributes. -Attributes are provided to the helper, one per line. Each attribute is -specified by a key-value pair, separated by an `=` (equals) sign, -followed by a newline. The key may contain any bytes except `=`, -newline, or NUL. The value may contain any bytes except newline or NUL. -In both cases, all bytes are treated as-is (i.e., there is no quoting, -and one cannot transmit a value with newline or NUL in it). The list of -attributes is terminated by a blank line or end-of-file. - -Git will send the following attributes (but may not send all of -them for a given credential; for example, a `host` attribute makes no -sense when dealing with a non-network protocol): - -`protocol`:: - - The protocol over which the credential will be used (e.g., - `https`). - -`host`:: - - The remote hostname for a network credential. - -`path`:: - - The path with which the credential will be used. E.g., for - accessing a remote https repository, this will be the - repository's path on the server. - -`username`:: - - The credential's username, if we already have one (e.g., from a - URL, from the user, or from a previously run helper). - -`password`:: - - The credential's password, if we are asking it to be stored. +stream. The exact format is the same as the input/output format of the +`git credential` plumbing command (see the section `INPUT/OUTPUT +FORMAT` in linkgit:git-credential[7] for a detailed specification). For a `get` operation, the helper should produce a list of attributes on stdout in the same format. A helper is free to produce a subset, or |