diff options
Diffstat (limited to 'Documentation')
31 files changed, 447 insertions, 132 deletions
diff --git a/Documentation/MyFirstContribution.txt b/Documentation/MyFirstContribution.txt index 427274df4d..d85c9b5143 100644 --- a/Documentation/MyFirstContribution.txt +++ b/Documentation/MyFirstContribution.txt @@ -1179,8 +1179,8 @@ look at the section below this one for some context.) [[after-approval]] === After Review Approval -The Git project has four integration branches: `pu`, `next`, `master`, and -`maint`. Your change will be placed into `pu` fairly early on by the maintainer +The Git project has four integration branches: `seen`, `next`, `master`, and +`maint`. Your change will be placed into `seen` fairly early on by the maintainer while it is still in the review process; from there, when it is ready for wider testing, it will be merged into `next`. Plenty of early testers use `next` and may report issues. Eventually, changes in `next` will make it to `master`, diff --git a/Documentation/RelNotes/2.28.0.txt b/Documentation/RelNotes/2.28.0.txt index 9fc6dc3a13..02e150efcb 100644 --- a/Documentation/RelNotes/2.28.0.txt +++ b/Documentation/RelNotes/2.28.0.txt @@ -10,6 +10,15 @@ Backward compatibility notes easily opt into a set of newer features, which use of the v2 transport protocol is now a part of. + * It used to be that setting extensions.* configuration variables + alone, while leaving core.repositoryFormatVersion=0, made these + settings effective, which was a wrong thing to do. In version 0, + there was no special meaning in extensions.* configuration + variables. This has been corrected. If you need these repository + extensions to be effective, the core.repositoryFormatVersion + variable needs to be updated to 1 after vetting these extensions.* + variables are set correctly. + UI, Workflows & Features @@ -19,6 +28,19 @@ UI, Workflows & Features * The check in "git fsck" to ensure that the tree objects are sorted still had corner cases it missed unsorted entries. + * The interface to redact sensitive information in the trace output + has been simplified. + + * The command line completion (in contrib/) learned to complete + options that the "git switch" command takes. + + * "git diff" used to take arguments in random and nonsense range + notation, e.g. "git diff A..B C", "git diff A..B C...D", etc., + which has been cleaned up. + + * "git diff-files" has been taught to say paths that are marked as + intent-to-add are new files, not modified from an empty blob. + Performance, Internal Implementation, Development Support etc. @@ -50,6 +72,25 @@ Performance, Internal Implementation, Development Support etc. * Workaround breakage in MSVC build, where "curl-config --cflags" gives settings appropriate for GCC build. + * Code clean-up of "git clean" resulted in a fix of recent + performance regression. + + * Code clean-up in the codepath that serves "git fetch" continues. + + * "git merge-base --is-ancestor" is taught to take advantage of the + commit graph. + + * Rewrite of parts of the scripted "git submodule" Porcelain command + continues; this time it is "git submodule set-branch" subcommand's + turn. + + * The "fetch/clone" protocol has been updated to allow the server to + instruct the clients to grab pre-packaged packfile(s) in addition + to the packed object data coming over the wire. + + * A misdesigned strbuf_write_fd() function has been retired. + + Fixes since v2.27 ----------------- @@ -99,9 +140,29 @@ Fixes since v2.27 * Use of negative pathspec, while collecting paths including untracked ones in the working tree, was broken. + * The same worktree directory must be registered only once, but + "git worktree move" allowed this invariant to be violated, which + has been corrected. + (merge 810382ed37 es/worktree-duplicate-paths later to maint). + + * The effect of sparse checkout settings on submodules is documented. + (merge e7d7c73249 en/sparse-with-submodule-doc later to maint). + + * Code clean-up around "git branch" with a minor bugfix. + (merge dc44639904 dl/branch-cleanup later to maint). + + * A branch name used in a test has been clarified to match what is + going on. + (merge 08dc26061f pb/t4014-unslave later to maint). + + * An in-code comment in "git diff" has been updated. + (merge c592fd4c83 dl/diff-usage-comment-update later to maint). + * Other code cleanup, docfix, build fix, etc. (merge 2c31a7aa44 jx/pkt-line-doc-count-fix later to maint). (merge d63ae31962 cb/t5608-cleanup later to maint). (merge 788db145c7 dl/t-readme-spell-git-correctly later to maint). (merge 45a87a83bb dl/python-2.7-is-the-floor-version later to maint). (merge b75a219904 es/advertise-contribution-doc later to maint). + (merge 0c9a4f638a rs/pull-leakfix later to maint). + (merge d546fe2874 rs/commit-reach-leakfix later to maint). diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches index ecf9438cf0..291b61e262 100644 --- a/Documentation/SubmittingPatches +++ b/Documentation/SubmittingPatches @@ -19,7 +19,7 @@ change is relevant to. base your work on the tip of the topic. * A new feature should be based on `master` in general. If the new - feature depends on a topic that is in `pu`, but not in `master`, + feature depends on a topic that is in `seen`, but not in `master`, base your work on the tip of that topic. * Corrections and enhancements to a topic not yet in `master` should @@ -28,7 +28,7 @@ change is relevant to. into the series. * In the exceptional case that a new feature depends on several topics - not in `master`, start working on `next` or `pu` privately and send + not in `master`, start working on `next` or `seen` privately and send out patches for discussion. Before the final merge, you may have to wait until some of the dependent topics graduate to `master`, and rebase your work. @@ -38,7 +38,7 @@ change is relevant to. these parts should be based on their trees. To find the tip of a topic branch, run `git log --first-parent -master..pu` and look for the merge commit. The second parent of this +master..seen` and look for the merge commit. The second parent of this commit is the tip of the topic branch. [[separate-commits]] @@ -424,7 +424,7 @@ help you find out who they are. and cooked further and eventually graduates to `master`. In any time between the (2)-(3) cycle, the maintainer may pick it up -from the list and queue it to `pu`, in order to make it easier for +from the list and queue it to `seen`, in order to make it easier for people play with it without having to pick up and apply the patch to their trees themselves. @@ -435,7 +435,7 @@ their trees themselves. master. `git pull --rebase` will automatically skip already-applied patches, and will let you know. This works only if you rebase on top of the branch in which your patch has been merged (i.e. it will not - tell you if your patch is merged in pu if you rebase on top of + tell you if your patch is merged in `seen` if you rebase on top of master). * Read the Git mailing list, the maintainer regularly posts messages diff --git a/Documentation/config/init.txt b/Documentation/config/init.txt index 46fa8c6a08..dc77f8c844 100644 --- a/Documentation/config/init.txt +++ b/Documentation/config/init.txt @@ -1,3 +1,7 @@ init.templateDir:: Specify the directory from which templates will be copied. (See the "TEMPLATE DIRECTORY" section of linkgit:git-init[1].) + +init.defaultBranch:: + Allows overriding the default branch name e.g. when initializing + a new repository or when cloning an empty repository. diff --git a/Documentation/git-branch.txt b/Documentation/git-branch.txt index 135206ff4a..03c0824d52 100644 --- a/Documentation/git-branch.txt +++ b/Documentation/git-branch.txt @@ -12,7 +12,7 @@ SYNOPSIS [-v [--abbrev=<length> | --no-abbrev]] [--column[=<options>] | --no-column] [--sort=<key>] [(--merged | --no-merged) [<commit>]] - [--contains [<commit]] [--no-contains [<commit>]] + [--contains [<commit>]] [--no-contains [<commit>]] [--points-at <object>] [--format=<format>] [(-r | --remotes) | (-a | --all)] [--list] [<pattern>...] diff --git a/Documentation/git-clone.txt b/Documentation/git-clone.txt index 08d6045c4a..c898310099 100644 --- a/Documentation/git-clone.txt +++ b/Documentation/git-clone.txt @@ -259,7 +259,7 @@ maintain a branch with no references other than a single cloned branch. This is useful e.g. to maintain minimal clones of the default branch of some repository for search indexing. ---recurse-submodules[=<pathspec]:: +--recurse-submodules[=<pathspec>]:: After the clone is created, initialize and clone submodules within based on the provided pathspec. If no pathspec is provided, all submodules are initialized and cloned. diff --git a/Documentation/git-diff.txt b/Documentation/git-diff.txt index 37781cf175..1018110ddc 100644 --- a/Documentation/git-diff.txt +++ b/Documentation/git-diff.txt @@ -11,15 +11,17 @@ SYNOPSIS [verse] 'git diff' [<options>] [<commit>] [--] [<path>...] 'git diff' [<options>] --cached [<commit>] [--] [<path>...] -'git diff' [<options>] <commit> <commit> [--] [<path>...] +'git diff' [<options>] <commit> [<commit>...] <commit> [--] [<path>...] +'git diff' [<options>] <commit>...<commit> [--] [<path>...] 'git diff' [<options>] <blob> <blob> 'git diff' [<options>] --no-index [--] <path> <path> DESCRIPTION ----------- Show changes between the working tree and the index or a tree, changes -between the index and a tree, changes between two trees, changes between -two blob objects, or changes between two files on disk. +between the index and a tree, changes between two trees, changes resulting +from a merge, changes between two blob objects, or changes between two +files on disk. 'git diff' [<options>] [--] [<path>...]:: @@ -67,6 +69,15 @@ two blob objects, or changes between two files on disk. one side is omitted, it will have the same effect as using HEAD instead. +'git diff' [<options>] <commit> [<commit>...] <commit> [--] [<path>...]:: + + This form is to view the results of a merge commit. The first + listed <commit> must be the merge itself; the remaining two or + more commits should be its parents. A convenient way to produce + the desired set of revisions is to use the {caret}@ suffix. + For instance, if `master` names a merge commit, `git diff master + master^@` gives the same combined diff as `git show master`. + 'git diff' [<options>] <commit>\...<commit> [--] [<path>...]:: This form is to view the changes on the branch containing @@ -196,7 +207,8 @@ linkgit:git-difftool[1], linkgit:git-log[1], linkgit:gitdiffcore[7], linkgit:git-format-patch[1], -linkgit:git-apply[1] +linkgit:git-apply[1], +linkgit:git-show[1] GIT --- diff --git a/Documentation/git-fetch.txt b/Documentation/git-fetch.txt index 5b1909fdf4..45b6d8e633 100644 --- a/Documentation/git-fetch.txt +++ b/Documentation/git-fetch.txt @@ -255,14 +255,14 @@ refspec. * Using refspecs explicitly: + ------------------------------------------------ -$ git fetch origin +pu:pu maint:tmp +$ git fetch origin +seen:seen maint:tmp ------------------------------------------------ + -This updates (or creates, as necessary) branches `pu` and `tmp` in +This updates (or creates, as necessary) branches `seen` and `tmp` in the local repository by fetching from the branches (respectively) -`pu` and `maint` from the remote repository. +`seen` and `maint` from the remote repository. + -The `pu` branch will be updated even if it does not fast-forward, +The `seen` branch will be updated even if it does not fast-forward, because it is prefixed with a plus sign; `tmp` will not be. * Peek at a remote's branch, without configuring the remote in your local diff --git a/Documentation/git-http-fetch.txt b/Documentation/git-http-fetch.txt index 666b042679..4deb4893f5 100644 --- a/Documentation/git-http-fetch.txt +++ b/Documentation/git-http-fetch.txt @@ -9,7 +9,7 @@ git-http-fetch - Download from a remote Git repository via HTTP SYNOPSIS -------- [verse] -'git http-fetch' [-c] [-t] [-a] [-d] [-v] [-w filename] [--recover] [--stdin] <commit> <url> +'git http-fetch' [-c] [-t] [-a] [-d] [-v] [-w filename] [--recover] [--stdin | --packfile=<hash> | <commit>] <url> DESCRIPTION ----------- @@ -40,6 +40,13 @@ commit-id:: <commit-id>['\t'<filename-as-in--w>] +--packfile=<hash>:: + Instead of a commit id on the command line (which is not expected in + this case), 'git http-fetch' fetches the packfile directly at the given + URL and uses index-pack to generate corresponding .idx and .keep files. + The hash is used to determine the name of the temporary file and is + arbitrary. The output of index-pack is printed to stdout. + --recover:: Verify that everything reachable from target is fetched. Used after an earlier fetch is interrupted. diff --git a/Documentation/git-index-pack.txt b/Documentation/git-index-pack.txt index d5b7560bfe..9316d9a80b 100644 --- a/Documentation/git-index-pack.txt +++ b/Documentation/git-index-pack.txt @@ -93,6 +93,14 @@ OPTIONS --max-input-size=<size>:: Die, if the pack is larger than <size>. +--object-format=<hash-algorithm>:: + Specify the given object format (hash algorithm) for the pack. The valid + values are 'sha1' and (if enabled) 'sha256'. The default is the algorithm for + the current repository (set by `extensions.objectFormat`), or 'sha1' if no + value is set or outside a repository. ++ +This option cannot be used with --stdin. + NOTES ----- diff --git a/Documentation/git-init.txt b/Documentation/git-init.txt index adc6adfd38..ddfe265da5 100644 --- a/Documentation/git-init.txt +++ b/Documentation/git-init.txt @@ -10,7 +10,8 @@ SYNOPSIS -------- [verse] 'git init' [-q | --quiet] [--bare] [--template=<template_directory>] - [--separate-git-dir <git dir>] [--object-format=<format] + [--separate-git-dir <git dir>] [--object-format=<format>] + [-b <branch-name> | --initial-branch=<branch-name>] [--shared[=<permissions>]] [directory] @@ -67,6 +68,12 @@ repository. + If this is reinitialization, the repository will be moved to the specified path. +-b <branch-name:: +--initial-branch=<branch-name>:: + +Use the specified name for the initial branch in the newly created repository. +If not specified, fall back to the default name: `master`. + --shared[=(false|true|umask|group|all|world|everybody|0xxx)]:: Specify that the Git repository is to be shared amongst several users. This diff --git a/Documentation/git-ls-remote.txt b/Documentation/git-ls-remote.txt index 0a5c8b7d49..492e573856 100644 --- a/Documentation/git-ls-remote.txt +++ b/Documentation/git-ls-remote.txt @@ -101,9 +101,9 @@ f25a265a342aed6041ab0cc484224d9ca54b6f41 refs/tags/v0.99.1 7ceca275d047c90c0c7d5afb13ab97efdf51bd6e refs/tags/v0.99.3 c5db5456ae3b0873fc659c19fafdde22313cc441 refs/tags/v0.99.2 0918385dbd9656cab0d1d81ba7453d49bbc16250 refs/tags/junio-gpg-pub -$ git ls-remote http://www.kernel.org/pub/scm/git/git.git master pu rc +$ git ls-remote http://www.kernel.org/pub/scm/git/git.git master seen rc 5fe978a5381f1fbad26a80e682ddd2a401966740 refs/heads/master -c781a84b5204fb294c9ccc79f8b3baceeb32c061 refs/heads/pu +c781a84b5204fb294c9ccc79f8b3baceeb32c061 refs/heads/seen $ git remote add korg http://www.kernel.org/pub/scm/git/git.git $ git ls-remote --tags korg v\* d6602ec5194c87b0fc87103ca4d67251c76f233a refs/tags/v0.99 diff --git a/Documentation/git-show-index.txt b/Documentation/git-show-index.txt index 424e4ba84c..39b1d8eaa1 100644 --- a/Documentation/git-show-index.txt +++ b/Documentation/git-show-index.txt @@ -9,7 +9,7 @@ git-show-index - Show packed archive index SYNOPSIS -------- [verse] -'git show-index' +'git show-index' [--object-format=<hash-algorithm>] DESCRIPTION @@ -36,6 +36,15 @@ Note that you can get more information on a packfile by calling linkgit:git-verify-pack[1]. However, as this command considers only the index file itself, it's both faster and more flexible. +OPTIONS +------- + +--object-format=<hash-algorithm>:: + Specify the given object format (hash algorithm) for the index file. The + valid values are 'sha1' and (if enabled) 'sha256'. The default is the + algorithm for the current repository (set by `extensions.objectFormat`), or + 'sha1' if no value is set or outside a repository.. + GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-sparse-checkout.txt b/Documentation/git-sparse-checkout.txt index 7c8943af7a..a0eeaeb02e 100644 --- a/Documentation/git-sparse-checkout.txt +++ b/Documentation/git-sparse-checkout.txt @@ -200,10 +200,32 @@ directory. SUBMODULES ---------- -If your repository contains one or more submodules, then those submodules will -appear based on which you initialized with the `git submodule` command. If -your sparse-checkout patterns exclude an initialized submodule, then that -submodule will still appear in your working directory. +If your repository contains one or more submodules, then submodules +are populated based on interactions with the `git submodule` command. +Specifically, `git submodule init -- <path>` will ensure the submodule +at `<path>` is present, while `git submodule deinit [-f] -- <path>` +will remove the files for the submodule at `<path>` (including any +untracked files, uncommitted changes, and unpushed history). Similar +to how sparse-checkout removes files from the working tree but still +leaves entries in the index, deinitialized submodules are removed from +the working directory but still have an entry in the index. + +Since submodules may have unpushed changes or untracked files, +removing them could result in data loss. Thus, changing sparse +inclusion/exclusion rules will not cause an already checked out +submodule to be removed from the working copy. Said another way, just +as `checkout` will not cause submodules to be automatically removed or +initialized even when switching between branches that remove or add +submodules, using `sparse-checkout` to reduce or expand the scope of +"interesting" files will not cause submodules to be automatically +deinitialized or initialized either. + +Further, the above facts mean that there are multiple reasons that +"tracked" files might not be present in the working copy: sparsity +pattern application from sparse-checkout, and submodule initialization +state. Thus, commands like `git grep` that work on tracked files in +the working copy may return results that are limited by either or both +of these restrictions. SEE ALSO diff --git a/Documentation/git-submodule.txt b/Documentation/git-submodule.txt index c9ed2bf3d5..7e5f995f77 100644 --- a/Documentation/git-submodule.txt +++ b/Documentation/git-submodule.txt @@ -183,7 +183,7 @@ set-branch (-d|--default) [--] <path>:: Sets the default remote tracking branch for the submodule. The `--branch` option allows the remote branch to be specified. The `--default` option removes the submodule.<name>.branch configuration - key, which causes the tracking branch to default to 'master'. + key, which causes the tracking branch to default to the remote 'HEAD'. set-url [--] <path> <newurl>:: Sets the URL of the specified submodule to <newurl>. Then, it will @@ -284,7 +284,7 @@ OPTIONS `.gitmodules` for `update --remote`. A special value of `.` is used to indicate that the name of the branch in the submodule should be the same name as the current branch in the current repository. If the - option is not specified, it defaults to 'master'. + option is not specified, it defaults to the remote 'HEAD'. -f:: --force:: @@ -322,10 +322,10 @@ OPTIONS the superproject's recorded SHA-1 to update the submodule, use the status of the submodule's remote-tracking branch. The remote used is branch's remote (`branch.<name>.remote`), defaulting to `origin`. - The remote branch used defaults to `master`, but the branch name may - be overridden by setting the `submodule.<name>.branch` option in - either `.gitmodules` or `.git/config` (with `.git/config` taking - precedence). + The remote branch used defaults to the remote `HEAD`, but the branch + name may be overridden by setting the `submodule.<name>.branch` + option in either `.gitmodules` or `.git/config` (with `.git/config` + taking precedence). + This works for any of the supported update procedures (`--checkout`, `--rebase`, etc.). The only change is the source of the target SHA-1. diff --git a/Documentation/git-worktree.txt b/Documentation/git-worktree.txt index 85d92c9761..4796c3c05e 100644 --- a/Documentation/git-worktree.txt +++ b/Documentation/git-worktree.txt @@ -126,7 +126,9 @@ OPTIONS locked working tree path, specify `--force` twice. + `move` refuses to move a locked working tree unless `--force` is specified -twice. +twice. If the destination is already assigned to some other working tree but is +missing (for instance, if `<new-path>` was deleted manually), then `--force` +allows the move to proceed; use --force twice if the destination is locked. + `remove` refuses to remove an unclean working tree unless `--force` is used. To remove a locked working tree, specify `--force` twice. diff --git a/Documentation/git.txt b/Documentation/git.txt index 40bd32f590..3e50065198 100644 --- a/Documentation/git.txt +++ b/Documentation/git.txt @@ -775,11 +775,10 @@ for full details. See `GIT_TRACE2` for available trace output options and link:technical/api-trace2.html[Trace2 documentation] for full details. -`GIT_REDACT_COOKIES`:: - This can be set to a comma-separated list of strings. When a curl trace - is enabled (see `GIT_TRACE_CURL` above), whenever a "Cookies:" header - sent by the client is dumped, values of cookies whose key is in that - list (case-sensitive) are redacted. +`GIT_TRACE_REDACT`:: + By default, when tracing is activated, Git redacts the values of + cookies, the "Authorization:" header, and the "Proxy-Authorization:" + header. Set this variable to `0` to prevent this redaction. `GIT_LITERAL_PATHSPECS`:: Setting this variable to `1` will cause Git to treat all diff --git a/Documentation/giteveryday.txt b/Documentation/giteveryday.txt index 1bd919f92b..faba2ef088 100644 --- a/Documentation/giteveryday.txt +++ b/Documentation/giteveryday.txt @@ -278,13 +278,13 @@ $ git am -3 -i -s ./+to-apply <4> $ compile/test $ git switch -c hold/linus && git am -3 -i -s ./+hold-linus <5> $ git switch topic/one && git rebase master <6> -$ git switch -C pu next <7> +$ git switch -C seen next <7> $ git merge topic/one topic/two && git merge hold/linus <8> $ git switch maint $ git cherry-pick master~4 <9> $ compile/test $ git tag -s -m "GIT 0.99.9x" v0.99.9x <10> -$ git fetch ko && for branch in master maint next pu <11> +$ git fetch ko && for branch in master maint next seen <11> do git show-branch ko/$branch $branch <12> done @@ -294,14 +294,14 @@ $ git push --follow-tags ko <13> <1> see what you were in the middle of doing, if anything. <2> see which branches haven't been merged into `master` yet. Likewise for any other integration branches e.g. `maint`, `next` -and `pu` (potential updates). +and `seen`. <3> read mails, save ones that are applicable, and save others that are not quite ready (other mail readers are available). <4> apply them, interactively, with your sign-offs. <5> create topic branch as needed and apply, again with sign-offs. <6> rebase internal topic branch that has not been merged to the master or exposed as a part of a stable branch. -<7> restart `pu` every time from the next. +<7> restart `seen` every time from the next. <8> and bundle topic branches still cooking. <9> backport a critical fix. <10> create a signed tag. @@ -323,7 +323,7 @@ repository at kernel.org, and looks like this: fetch = refs/heads/*:refs/remotes/ko/* push = refs/heads/master push = refs/heads/next - push = +refs/heads/pu + push = +refs/heads/seen push = refs/heads/maint ------------ diff --git a/Documentation/githooks.txt b/Documentation/githooks.txt index 81f2a87e88..642471109f 100644 --- a/Documentation/githooks.txt +++ b/Documentation/githooks.txt @@ -404,6 +404,35 @@ Both standard output and standard error output are forwarded to `git send-pack` on the other end, so you can simply `echo` messages for the user. +ref-transaction +~~~~~~~~~~~~~~~ + +This hook is invoked by any Git command that performs reference +updates. It executes whenever a reference transaction is prepared, +committed or aborted and may thus get called multiple times. + +The hook takes exactly one argument, which is the current state the +given reference transaction is in: + + - "prepared": All reference updates have been queued to the + transaction and references were locked on disk. + + - "committed": The reference transaction was committed and all + references now have their respective new value. + + - "aborted": The reference transaction was aborted, no changes + were performed and the locks have been released. + +For each reference update that was added to the transaction, the hook +receives on standard input a line of the format: + + <old-value> SP <new-value> SP <ref-name> LF + +The exit status of the hook is ignored for any state except for the +"prepared" state. In the "prepared" state, a non-zero exit status will +cause the transaction to be aborted. The hook will not be called with +"aborted" state in that case. + push-to-checkout ~~~~~~~~~~~~~~~~ diff --git a/Documentation/gitmodules.txt b/Documentation/gitmodules.txt index 67275fd187..539b4e1997 100644 --- a/Documentation/gitmodules.txt +++ b/Documentation/gitmodules.txt @@ -49,9 +49,9 @@ submodule.<name>.update:: submodule.<name>.branch:: A remote branch name for tracking updates in the upstream submodule. - If the option is not specified, it defaults to 'master'. A special - value of `.` is used to indicate that the name of the branch in the - submodule should be the same name as the current branch in the + If the option is not specified, it defaults to the remote 'HEAD'. + A special value of `.` is used to indicate that the name of the branch + in the submodule should be the same name as the current branch in the current repository. See the `--remote` documentation in linkgit:git-submodule[1] for details. diff --git a/Documentation/gitremote-helpers.txt b/Documentation/gitremote-helpers.txt index 93baeeb029..6f1e269ae4 100644 --- a/Documentation/gitremote-helpers.txt +++ b/Documentation/gitremote-helpers.txt @@ -238,6 +238,9 @@ the remote repository. `--signed-tags=verbatim` to linkgit:git-fast-export[1]. In the absence of this capability, Git will use `--signed-tags=warn-strip`. +'object-format':: + This indicates that the helper is able to interact with the remote + side using an explicit hash algorithm extension. COMMANDS @@ -257,12 +260,14 @@ Support for this command is mandatory. 'list':: Lists the refs, one per line, in the format "<value> <name> [<attr> ...]". The value may be a hex sha1 hash, "@<dest>" for - a symref, or "?" to indicate that the helper could not get the - value of the ref. A space-separated list of attributes follows - the name; unrecognized attributes are ignored. The list ends - with a blank line. + a symref, ":<keyword> <value>" for a key-value pair, or + "?" to indicate that the helper could not get the value of the + ref. A space-separated list of attributes follows the name; + unrecognized attributes are ignored. The list ends with a + blank line. + See REF LIST ATTRIBUTES for a list of currently defined attributes. +See REF LIST KEYWORDS for a list of currently defined keywords. + Supported if the helper has the "fetch" or "import" capability. @@ -432,6 +437,18 @@ attributes are defined. This ref is unchanged since the last import or fetch, although the helper cannot necessarily determine what value that produced. +REF LIST KEYWORDS +----------------- + +The 'list' command may produce a list of key-value pairs. +The following keys are defined. + +'object-format':: + The refs are using the given hash algorithm. This keyword is only + used if the server and client both support the object-format + extension. + + OPTIONS ------- @@ -516,6 +533,14 @@ set by Git if the remote helper has the 'option' capability. transaction. If successful, all refs will be updated, or none will. If the remote side does not support this capability, the push will fail. +'option object-format' {'true'|algorithm}:: + If 'true', indicate that the caller wants hash algorithm information + to be passed back from the remote. This mode is used when fetching + refs. ++ +If set to an algorithm, indicate that the caller wants to interact with +the remote side using that algorithm. + SEE ALSO -------- linkgit:git-remote[1] diff --git a/Documentation/gitworkflows.txt b/Documentation/gitworkflows.txt index abc0dc6bc7..2db7ba7842 100644 --- a/Documentation/gitworkflows.txt +++ b/Documentation/gitworkflows.txt @@ -85,15 +85,15 @@ As a given feature goes from experimental to stable, it also There is a fourth official branch that is used slightly differently: -* 'pu' (proposed updates) is an integration branch for things that are - not quite ready for inclusion yet (see "Integration Branches" - below). +* 'seen' (patches seen by the maintainer) is an integration branch for + things that are not quite ready for inclusion yet (see "Integration + Branches" below). Each of the four branches is usually a direct descendant of the one above it. Conceptually, the feature enters at an unstable branch (usually 'next' -or 'pu'), and "graduates" to 'master' for the next release once it is +or 'seen'), and "graduates" to 'master' for the next release once it is considered stable enough. @@ -207,7 +207,7 @@ If you make it (very) clear that this branch is going to be deleted right after the testing, you can even publish this branch, for example to give the testers a chance to work with it, or other developers a chance to see if their in-progress work will be compatible. `git.git` -has such an official throw-away integration branch called 'pu'. +has such an official throw-away integration branch called 'seen'. Branch management for a release @@ -291,7 +291,7 @@ This will not happen if the content of the branches was verified as described in the previous section. -Branch management for next and pu after a feature release +Branch management for next and seen after a feature release ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ After a feature release, the integration branch 'next' may optionally be @@ -319,8 +319,8 @@ so. If you do this, then you should make a public announcement indicating that 'next' was rewound and rebuilt. -The same rewind and rebuild process may be followed for 'pu'. A public -announcement is not necessary since 'pu' is a throw-away branch, as +The same rewind and rebuild process may be followed for 'seen'. A public +announcement is not necessary since 'seen' is a throw-away branch, as described above. diff --git a/Documentation/howto/maintain-git.txt b/Documentation/howto/maintain-git.txt index 73be8b49f8..a67130debb 100644 --- a/Documentation/howto/maintain-git.txt +++ b/Documentation/howto/maintain-git.txt @@ -66,7 +66,7 @@ this mailing list after each feature release is made. demonstrated to be regression free. New changes are tested in 'next' before merged to 'master'. - - 'pu' branch is used to publish other proposed changes that do + - 'seen' branch is used to publish other proposed changes that do not yet pass the criteria set for 'next'. - The tips of 'master' and 'maint' branches will not be rewound to @@ -76,7 +76,7 @@ this mailing list after each feature release is made. of the cycle. - Usually 'master' contains all of 'maint' and 'next' contains all - of 'master'. 'pu' contains all the topics merged to 'next', but + of 'master'. 'seen' contains all the topics merged to 'next', but is rebuilt directly on 'master'. - The tip of 'master' is meant to be more stable than any @@ -229,12 +229,12 @@ by doing the following: series?) - Prepare 'jch' branch, which is used to represent somewhere - between 'master' and 'pu' and often is slightly ahead of 'next'. + between 'master' and 'seen' and often is slightly ahead of 'next'. - $ Meta/Reintegrate master..pu >Meta/redo-jch.sh + $ Meta/Reintegrate master..seen >Meta/redo-jch.sh The result is a script that lists topics to be merged in order to - rebuild 'pu' as the input to Meta/Reintegrate script. Remove + rebuild 'seen' as the input to Meta/Reintegrate script. Remove later topics that should not be in 'jch' yet. Add a line that consists of '### match next' before the name of the first topic in the output that should be in 'jch' but not in 'next' yet. @@ -291,29 +291,29 @@ by doing the following: merged to 'master'. This may lose '### match next' marker; add it again to the appropriate place when it happens. - - Rebuild 'pu'. + - Rebuild 'seen'. - $ Meta/Reintegrate master..pu >Meta/redo-pu.sh + $ Meta/Reintegrate master..seen >Meta/redo-seen.sh - Edit the result by adding new topics that are not still in 'pu' + Edit the result by adding new topics that are not still in 'seen' in the script. Then - $ git checkout -B pu jch - $ sh Meta/redo-pu.sh + $ git checkout -B seen jch + $ sh Meta/redo-seen.sh - When all is well, clean up the redo-pu.sh script with + When all is well, clean up the redo-seen.sh script with - $ sh Meta/redo-pu.sh -u + $ sh Meta/redo-seen.sh -u Double check by running - $ git branch --no-merged pu + $ git branch --no-merged seen to see there is no unexpected leftover topics. At this point, build-test the result for semantic conflicts, and if there are, prepare an appropriate merge-fix first (see - appendix), and rebuild the 'pu' branch from scratch, starting at + appendix), and rebuild the 'seen' branch from scratch, starting at the tip of 'jch'. - Update "What's cooking" message to review the updates to @@ -323,14 +323,14 @@ by doing the following: $ Meta/cook - This script inspects the history between master..pu, finds tips + This script inspects the history between master..seen, finds tips of topic branches, compares what it found with the current contents in Meta/whats-cooking.txt, and updates that file. - Topics not listed in the file but are found in master..pu are + Topics not listed in the file but are found in master..seen are added to the "New topics" section, topics listed in the file that - are no longer found in master..pu are moved to the "Graduated to + are no longer found in master..seen are moved to the "Graduated to master" section, and topics whose commits changed their states - (e.g. used to be only in 'pu', now merged to 'next') are updated + (e.g. used to be only in 'seen', now merged to 'next') are updated with change markers "<<" and ">>". Look for lines enclosed in "<<" and ">>"; they hold contents from @@ -360,7 +360,7 @@ Observations Some observations to be made. * Each topic is tested individually, and also together with other - topics cooking first in 'pu', then in 'jch' and then in 'next'. + topics cooking first in 'seen', then in 'jch' and then in 'next'. Until it matures, no part of it is merged to 'master'. * A topic already in 'next' can get fixes while still in @@ -411,7 +411,7 @@ new use of the variable under its old name. When these two topics are merged together, the reference to the variable newly added by the latter topic will still use the old name in the result. -The Meta/Reintegrate script that is used by redo-jch and redo-pu +The Meta/Reintegrate script that is used by redo-jch and redo-seen scripts implements a crude but usable way to work this issue around. When the script merges branch $X, it checks if "refs/merge-fix/$X" exists, and if so, the effect of it is squashed into the result of @@ -431,14 +431,14 @@ commit that can be squashed into a result of mechanical merge to correct semantic conflicts. After finding that the result of merging branch "ai/topic" to an -integration branch had such a semantic conflict, say pu~4, check the +integration branch had such a semantic conflict, say seen~4, check the problematic merge out on a detached HEAD, edit the working tree to fix the semantic conflict, and make a separate commit to record the fix-up: - $ git checkout pu~4 + $ git checkout seen~4 $ git show -s --pretty=%s ;# double check - Merge branch 'ai/topic' to pu + Merge branch 'ai/topic' to seen $ edit $ git commit -m 'merge-fix/ai/topic' -a @@ -450,9 +450,9 @@ result: Then double check the result by asking Meta/Reintegrate to redo the merge: - $ git checkout pu~5 ;# the parent of the problem merge + $ git checkout seen~5 ;# the parent of the problem merge $ echo ai/topic | Meta/Reintegrate - $ git diff pu~4 + $ git diff seen~4 This time, because you prepared refs/merge-fix/ai/topic, the resulting merge should have been tweaked to include the fix for the @@ -464,7 +464,7 @@ branch needs this merge-fix is because another branch merged earlier to the integration branch changed the underlying assumption ai/topic branch made (e.g. ai/topic branch added a site to refer to a variable, while the other branch renamed that variable and adjusted -existing use sites), and if you changed redo-jch (or redo-pu) script +existing use sites), and if you changed redo-jch (or redo-seen) script to merge ai/topic branch before the other branch, then the above merge-fix should not be applied while merging ai/topic, but should instead be applied while merging the other branch. You would need diff --git a/Documentation/howto/rebase-from-internal-branch.txt b/Documentation/howto/rebase-from-internal-branch.txt index 02cb5f758d..f2e10a7ec8 100644 --- a/Documentation/howto/rebase-from-internal-branch.txt +++ b/Documentation/howto/rebase-from-internal-branch.txt @@ -4,7 +4,7 @@ Cc: Petr Baudis <pasky@suse.cz>, Linus Torvalds <torvalds@osdl.org> Subject: Re: sending changesets from the middle of a git tree Date: Sun, 14 Aug 2005 18:37:39 -0700 Abstract: In this article, JC talks about how he rebases the - public "pu" branch using the core Git tools when he updates + public "seen" branch using the core Git tools when he updates the "master" branch, and how "rebase" works. Also discussed is how this applies to individual developers who sends patches upstream. @@ -20,8 +20,8 @@ Petr Baudis <pasky@suse.cz> writes: > where Junio C Hamano <junkio@cox.net> told me that... >> Linus Torvalds <torvalds@osdl.org> writes: >> ->> > Junio, maybe you want to talk about how you move patches from your "pu" ->> > branch to the real branches. +>> > Junio, maybe you want to talk about how you move patches from your +>> > "seen" branch to the real branches. >> > Actually, wouldn't this be also precisely for what StGIT is intended to? -------------------------------------- @@ -33,12 +33,12 @@ the kind of task StGIT is designed to do. I just have done a simpler one, this time using only the core Git tools. -I had a handful of commits that were ahead of master in pu, and I +I had a handful of commits that were ahead of master in 'seen', and I wanted to add some documentation bypassing my usual habit of -placing new things in pu first. At the beginning, the commit +placing new things in 'seen' first. At the beginning, the commit ancestry graph looked like this: - *"pu" head + *"seen" head master --> #1 --> #2 --> #3 So I started from master, made a bunch of edits, and committed: @@ -50,7 +50,7 @@ So I started from master, made a bunch of edits, and committed: After the commit, the ancestry graph would look like this: - *"pu" head + *"seen" head master^ --> #1 --> #2 --> #3 \ \---> master @@ -58,31 +58,31 @@ After the commit, the ancestry graph would look like this: The old master is now master^ (the first parent of the master). The new master commit holds my documentation updates. -Now I have to deal with "pu" branch. +Now I have to deal with "seen" branch. This is the kind of situation I used to have all the time when Linus was the maintainer and I was a contributor, when you look -at "master" branch being the "maintainer" branch, and "pu" +at "master" branch being the "maintainer" branch, and "seen" branch being the "contributor" branch. Your work started at the tip of the "maintainer" branch some time ago, you made a lot of progress in the meantime, and now the maintainer branch has some other commits you do not have yet. And "git rebase" was written with the explicit purpose of helping to maintain branches like -"pu". You _could_ merge master to pu and keep going, but if you +"seen". You _could_ merge master to 'seen' and keep going, but if you eventually want to cherrypick and merge some but not necessarily all changes back to the master branch, it often makes later operations for _you_ easier if you rebase (i.e. carry forward -your changes) "pu" rather than merge. So I ran "git rebase": +your changes) "seen" rather than merge. So I ran "git rebase": - $ git checkout pu - $ git rebase master pu + $ git checkout seen + $ git rebase master seen What this does is to pick all the commits since the current -branch (note that I now am on "pu" branch) forked from the +branch (note that I now am on "seen" branch) forked from the master branch, and forward port these changes. master^ --> #1 --> #2 --> #3 - \ *"pu" head + \ *"seen" head \---> master --> #1' --> #2' --> #3' The diff between master^ and #1 is applied to master and @@ -92,7 +92,7 @@ commits are made similarly out of #2 and #3 commits. Old #3 is not recorded in any of the .git/refs/heads/ file anymore, so after doing this you will have dangling commit if -you ran fsck-cache, which is normal. After testing "pu", you +you ran fsck-cache, which is normal. After testing "seen", you can run "git prune" to get rid of those original three commits. While I am talking about "git rebase", I should talk about how diff --git a/Documentation/howto/revert-branch-rebase.txt b/Documentation/howto/revert-branch-rebase.txt index 149508e13b..a3e5595a56 100644 --- a/Documentation/howto/revert-branch-rebase.txt +++ b/Documentation/howto/revert-branch-rebase.txt @@ -15,7 +15,7 @@ One of the changes I pulled into the 'master' branch turns out to break building Git with GCC 2.95. While they were well-intentioned portability fixes, keeping things working with gcc-2.95 was also important. Here is what I did to revert the change in the 'master' -branch and to adjust the 'pu' branch, using core Git tools and +branch and to adjust the 'seen' branch, using core Git tools and barebone Porcelain. First, prepare a throw-away branch in case I screw things up. @@ -104,11 +104,11 @@ $ git diff master..revert-c99 says nothing. -Then we rebase the 'pu' branch as usual. +Then we rebase the 'seen' branch as usual. ------------------------------------------------ -$ git checkout pu -$ git tag pu-anchor pu +$ git checkout seen +$ git tag seen-anchor seen $ git rebase master * Applying: Redo "revert" using three-way merge machinery. First trying simple merge strategy to cherry-pick. @@ -127,11 +127,11 @@ First trying simple merge strategy to cherry-pick. First trying simple merge strategy to cherry-pick. ------------------------------------------------ -The temporary tag 'pu-anchor' is me just being careful, in case 'git +The temporary tag 'seen-anchor' is me just being careful, in case 'git rebase' screws up. After this, I can do these for sanity check: ------------------------------------------------ -$ git diff pu-anchor..pu ;# make sure we got the master fix. +$ git diff seen-anchor..seen ;# make sure we got the master fix. $ make CC=gcc-2.95 clean test ;# make sure it fixed the breakage. $ make clean test ;# make sure it did not cause other breakage. ------------------------------------------------ @@ -140,7 +140,7 @@ Everything is in the good order. I do not need the temporary branch or tag anymore, so remove them: ------------------------------------------------ -$ rm -f .git/refs/tags/pu-anchor +$ rm -f .git/refs/tags/seen-anchor $ git branch -d revert-c99 ------------------------------------------------ @@ -168,18 +168,18 @@ Committed merge 7fb9b7262a1d1e0a47bbfdcbbcf50ce0635d3f8f And the final repository status looks like this: ------------------------------------------------ -$ git show-branch --more=1 master pu rc +$ git show-branch --more=1 master seen rc ! [master] Revert "Replace zero-length array decls with []." - ! [pu] git-repack: Add option to repack all objects. + ! [seen] git-repack: Add option to repack all objects. * [rc] Merge refs/heads/master from . --- - + [pu] git-repack: Add option to repack all objects. - + [pu~1] More documentation updates. - + [pu~2] Show commits in topo order and name all commits. - + [pu~3] mailinfo and applymbox updates - + [pu~4] Document "git cherry-pick" and "git revert" - + [pu~5] Remove git-apply-patch-script. - + [pu~6] Redo "revert" using three-way merge machinery. + + [seen] git-repack: Add option to repack all objects. + + [seen~1] More documentation updates. + + [seen~2] Show commits in topo order and name all commits. + + [seen~3] mailinfo and applymbox updates + + [seen~4] Document "git cherry-pick" and "git revert" + + [seen~5] Remove git-apply-patch-script. + + [seen~6] Redo "revert" using three-way merge machinery. - [rc] Merge refs/heads/master from . ++* [master] Revert "Replace zero-length array decls with []." - [rc~1] Merge refs/heads/master from . diff --git a/Documentation/howto/update-hook-example.txt b/Documentation/howto/update-hook-example.txt index 89821ec74f..151ee84ceb 100644 --- a/Documentation/howto/update-hook-example.txt +++ b/Documentation/howto/update-hook-example.txt @@ -179,7 +179,7 @@ allowed-groups, to describe which heads can be pushed into by whom. The format of each file would look like this: refs/heads/master junio - +refs/heads/pu junio + +refs/heads/seen junio refs/heads/cogito$ pasky refs/heads/bw/.* linus refs/heads/tmp/.* .* @@ -187,6 +187,6 @@ whom. The format of each file would look like this: With this, Linus can push or create "bw/penguin" or "bw/zebra" or "bw/panda" branches, Pasky can do only "cogito", and JC can -do master and pu branches and make versioned tags. And anybody -can do tmp/blah branches. The '+' sign at the pu record means +do master and "seen" branches and make versioned tags. And anybody +can do tmp/blah branches. The '+' sign at the "seen" record means that JC can make non-fast-forward pushes on it. diff --git a/Documentation/pretty-formats.txt b/Documentation/pretty-formats.txt index 547a552463..84bbc7439a 100644 --- a/Documentation/pretty-formats.txt +++ b/Documentation/pretty-formats.txt @@ -196,8 +196,8 @@ The placeholders are: '%ce':: committer email '%cE':: committer email (respecting .mailmap, see linkgit:git-shortlog[1] or linkgit:git-blame[1]) -'%cl':: author email local-part (the part before the '@' sign) -'%cL':: author local-part (see '%cl') respecting .mailmap, see +'%cl':: committer email local-part (the part before the '@' sign) +'%cL':: committer local-part (see '%cl') respecting .mailmap, see linkgit:git-shortlog[1] or linkgit:git-blame[1]) '%cd':: committer date (format respects --date= option) '%cD':: committer date, RFC2822 style diff --git a/Documentation/technical/packfile-uri.txt b/Documentation/technical/packfile-uri.txt new file mode 100644 index 0000000000..318713abc3 --- /dev/null +++ b/Documentation/technical/packfile-uri.txt @@ -0,0 +1,78 @@ +Packfile URIs +============= + +This feature allows servers to serve part of their packfile response as URIs. +This allows server designs that improve scalability in bandwidth and CPU usage +(for example, by serving some data through a CDN), and (in the future) provides +some measure of resumability to clients. + +This feature is available only in protocol version 2. + +Protocol +-------- + +The server advertises the `packfile-uris` capability. + +If the client then communicates which protocols (HTTPS, etc.) it supports with +a `packfile-uris` argument, the server MAY send a `packfile-uris` section +directly before the `packfile` section (right after `wanted-refs` if it is +sent) containing URIs of any of the given protocols. The URIs point to +packfiles that use only features that the client has declared that it supports +(e.g. ofs-delta and thin-pack). See protocol-v2.txt for the documentation of +this section. + +Clients should then download and index all the given URIs (in addition to +downloading and indexing the packfile given in the `packfile` section of the +response) before performing the connectivity check. + +Server design +------------- + +The server can be trivially made compatible with the proposed protocol by +having it advertise `packfile-uris`, tolerating the client sending +`packfile-uris`, and never sending any `packfile-uris` section. But we should +include some sort of non-trivial implementation in the Minimum Viable Product, +at least so that we can test the client. + +This is the implementation: a feature, marked experimental, that allows the +server to be configured by one or more `uploadpack.blobPackfileUri=<sha1> +<uri>` entries. Whenever the list of objects to be sent is assembled, all such +blobs are excluded, replaced with URIs. The client will download those URIs, +expecting them to each point to packfiles containing single blobs. + +Client design +------------- + +The client has a config variable `fetch.uriprotocols` that determines which +protocols the end user is willing to use. By default, this is empty. + +When the client downloads the given URIs, it should store them with "keep" +files, just like it does with the packfile in the `packfile` section. These +additional "keep" files can only be removed after the refs have been updated - +just like the "keep" file for the packfile in the `packfile` section. + +The division of work (initial fetch + additional URIs) introduces convenient +points for resumption of an interrupted clone - such resumption can be done +after the Minimum Viable Product (see "Future work"). + +Future work +----------- + +The protocol design allows some evolution of the server and client without any +need for protocol changes, so only a small-scoped design is included here to +form the MVP. For example, the following can be done: + + * On the server, more sophisticated means of excluding objects (e.g. by + specifying a commit to represent that commit and all objects that it + references). + * On the client, resumption of clone. If a clone is interrupted, information + could be recorded in the repository's config and a "clone-resume" command + can resume the clone in progress. (Resumption of subsequent fetches is more + difficult because that must deal with the user wanting to use the repository + even after the fetch was interrupted.) + +There are some possible features that will require a change in protocol: + + * Additional HTTP headers (e.g. authentication) + * Byte range support + * Different file formats referenced by URIs (e.g. raw object) diff --git a/Documentation/technical/protocol-capabilities.txt b/Documentation/technical/protocol-capabilities.txt index 2b267c0da6..36ccd14f97 100644 --- a/Documentation/technical/protocol-capabilities.txt +++ b/Documentation/technical/protocol-capabilities.txt @@ -176,6 +176,21 @@ agent strings are purely informative for statistics and debugging purposes, and MUST NOT be used to programmatically assume the presence or absence of particular features. +object-format +------------- + +This capability, which takes a hash algorithm as an argument, indicates +that the server supports the given hash algorithms. It may be sent +multiple times; if so, the first one given is the one used in the ref +advertisement. + +When provided by the client, this indicates that it intends to use the +given hash algorithm to communicate. The algorithm provided must be one +that the server supports. + +If this capability is not provided, it is assumed that the only +supported algorithm is SHA-1. + symref ------ diff --git a/Documentation/technical/protocol-v2.txt b/Documentation/technical/protocol-v2.txt index 3996d70891..e597b74da3 100644 --- a/Documentation/technical/protocol-v2.txt +++ b/Documentation/technical/protocol-v2.txt @@ -325,13 +325,26 @@ included in the client's request: indicating its sideband (1, 2, or 3), and the server may send "0005\2" (a PKT-LINE of sideband 2 with no payload) as a keepalive packet. +If the 'packfile-uris' feature is advertised, the following argument +can be included in the client's request as well as the potential +addition of the 'packfile-uris' section in the server's response as +explained below. + + packfile-uris <comma-separated list of protocols> + Indicates to the server that the client is willing to receive + URIs of any of the given protocols in place of objects in the + sent packfile. Before performing the connectivity check, the + client should download from all given URIs. Currently, the + protocols supported are "http" and "https". + The response of `fetch` is broken into a number of sections separated by delimiter packets (0001), with each section beginning with its section -header. +header. Most sections are sent only when the packfile is sent. - output = *section - section = (acknowledgments | shallow-info | wanted-refs | packfile) - (flush-pkt | delim-pkt) + output = acknowledgements flush-pkt | + [acknowledgments delim-pkt] [shallow-info delim-pkt] + [wanted-refs delim-pkt] [packfile-uris delim-pkt] + packfile flush-pkt acknowledgments = PKT-LINE("acknowledgments" LF) (nak | *ack) @@ -349,13 +362,17 @@ header. *PKT-LINE(wanted-ref LF) wanted-ref = obj-id SP refname + packfile-uris = PKT-LINE("packfile-uris" LF) *packfile-uri + packfile-uri = PKT-LINE(40*(HEXDIGIT) SP *%x20-ff LF) + packfile = PKT-LINE("packfile" LF) *PKT-LINE(%x01-03 *%x00-ff) acknowledgments section - * If the client determines that it is finished with negotiations - by sending a "done" line, the acknowledgments sections MUST be - omitted from the server's response. + * If the client determines that it is finished with negotiations by + sending a "done" line (thus requiring the server to send a packfile), + the acknowledgments sections MUST be omitted from the server's + response. * Always begins with the section header "acknowledgments" @@ -406,9 +423,6 @@ header. which the client has not indicated was shallow as a part of its request. - * This section is only included if a packfile section is also - included in the response. - wanted-refs section * This section is only included if the client has requested a ref using a 'want-ref' line and if a packfile section is also @@ -422,6 +436,20 @@ header. * The server MUST NOT send any refs which were not requested using 'want-ref' lines. + packfile-uris section + * This section is only included if the client sent + 'packfile-uris' and the server has at least one such URI to + send. + + * Always begins with the section header "packfile-uris". + + * For each URI the server sends, it sends a hash of the pack's + contents (as output by git index-pack) followed by the URI. + + * The hashes are 40 hex characters long. When Git upgrades to a new + hash algorithm, this might need to be updated. (It should match + whatever index-pack outputs after "pack\t" or "keep\t". + packfile section * This section is only included if the client has sent 'want' lines in its request and either requested that no more @@ -455,3 +483,12 @@ included in a request. This is done by sending each option as a a request. The provided options must not contain a NUL or LF character. + + object-format +~~~~~~~~~~~~~~~ + +The server can advertise the `object-format` capability with a value `X` (in the +form `object-format=X`) to notify the client that the server is able to deal +with objects using hash algorithm X. If not specified, the server is assumed to +only handle SHA-1. If the client would like to use a hash algorithm other than +SHA-1, it should specify its object-format string. diff --git a/Documentation/user-manual.txt b/Documentation/user-manual.txt index 833652983f..fd480b8645 100644 --- a/Documentation/user-manual.txt +++ b/Documentation/user-manual.txt @@ -347,7 +347,7 @@ $ git branch -r origin/man origin/master origin/next - origin/pu + origin/seen origin/todo ------------------------------------------------ |