diff options
Diffstat (limited to 'Documentation')
56 files changed, 1031 insertions, 183 deletions
diff --git a/Documentation/RelNotes/1.8.2.2.txt b/Documentation/RelNotes/1.8.2.2.txt new file mode 100644 index 0000000000..dab4831ca0 --- /dev/null +++ b/Documentation/RelNotes/1.8.2.2.txt @@ -0,0 +1,61 @@ +Git v1.8.2.2 Release Notes +========================== + +Fixes since v1.8.2.1 +-------------------- + + * Zsh completion forgot that '%' character used to signal untracked + files needs to be escaped with another '%'. + + * A commit object whose author or committer ident are malformed + crashed some code that trusted that a name, an email and an + timestamp can always be found in it. + + * The new core.commentchar configuration was not applied to a few + places. + + * "git pull --rebase" did not pass "-v/-q" options to underlying + "git rebase". + + * When receive-pack detects error in the pack header it received in + order to decide which of unpack-objects or index-pack to run, it + returned without closing the error stream, which led to a hang + sideband thread. + + * "git diff --diff-algorithm=algo" was understood by the command line + parser, but "git diff --diff-algorithm algo" was not. + + * "git log -S/-G" started paying attention to textconv filter, but + there was no way to disable this. Make it honor --no-textconv + option. + + * "git merge $(git rev-parse v1.8.2)" behaved quite differently from + "git merge v1.8.2", as if v1.8.2 were written as v1.8.2^0 and did + not pay much attention to the annotated tag payload. Make the code + notice the type of the tag object, in addition to the dwim_ref() + based classification the current code uses (i.e. the name appears + in refs/tags/) to decide when to special case merging of tags. + + * "git cherry-pick" and "git revert" can take more than one commit + on the command line these days, but it was not mentioned on the usage + text. + + * Perl scripts like "git-svn" closed (not redirecting to /dev/null) + the standard error stream, which is not a very smart thing to do. + Later open may return file descriptor #2 for unrelated purpose, and + error reporting code may write into them. + + * "git apply --whitespace=fix" was not prepared to see a line getting + longer after fixing whitespaces (e.g. tab-in-indent aka Python). + + * "git diff/log --cc" did not work well with options that ignore + whitespace changes. + + * Documentation on setting up a http server that requires + authentication only on the push but not fetch has been clarified. + + * A few bugfixes to "git rerere" working on corner case merge + conflicts have been applied. + + * "git bundle" did not like a bundle created using a commit without + any message as its one of the prerequistes. diff --git a/Documentation/RelNotes/1.8.3.txt b/Documentation/RelNotes/1.8.3.txt new file mode 100644 index 0000000000..261f82654d --- /dev/null +++ b/Documentation/RelNotes/1.8.3.txt @@ -0,0 +1,428 @@ +Git v1.8.3 Release Notes +======================== + +Backward compatibility notes (for Git 2.0) +------------------------------------------ + +When "git push [$there]" does not say what to push, we have used the +traditional "matching" semantics so far (all your branches were sent +to the remote as long as there already are branches of the same name +over there). In Git 2.0, the default will change to the "simple" +semantics that pushes the current branch to the branch with the same +name, only when the current branch is set to integrate with that +remote branch. There is a user preference configuration variable +"push.default" to change this. If you are an old-timer who is used +to the "matching" semantics, you can set it to "matching" to keep the +traditional behaviour. If you want to live in the future early, +you can set it to "simple" today without waiting for Git 2.0. + +When "git add -u" and "git add -A", that does not specify what paths +to add on the command line is run from inside a subdirectory, these +commands will operate on the entire tree in Git 2.0 for consistency +with "git commit -a" and other commands. Because there will be no +mechanism to make "git add -u" behave as if "git add -u .", it is +important for those who are used to "git add -u" (without pathspec) +updating the index only for paths in the current subdirectory to start +training their fingers to explicitly say "git add -u ." when they mean +it before Git 2.0 comes. A warning is issued when these commands are +run without a pathspec and when you have local changes outside the +current directory, because the behaviour in Git 2.0 will be different +from today's version in such a situation. + + +Updates since v1.8.2 +-------------------- + +Foreign interface + + * remote-hg helper (in contrib/) has been updated. + + +UI, Workflows & Features + + * "git branch --vv" learned to paint the name of the branch it + integrates with in a different color (color.branch.upstream, + which defaults to blue). + + * In a sparsely populated working tree, "git checkout <pathspec>" no + longer unmarks paths that match the given pathspec that were + originally ignored with "--sparse" (use --ignore-skip-worktree-bits + option to resurrect these paths out of the index if you really want + to). + + * "git log --format" specifier learned %C(auto) token that tells Git + to use color when interpolating %d (decoration), %h (short commit + object name), etc. for terminal output. + + * "git bisect" leaves the final outcome as a comment in its bisect + log file. + + * "git clone --reference" can now refer to a gitfile "textual symlink" + that points at the real location of the repository. + + * "git count-objects" learned "--human-readable" aka "-H" option to + show various large numbers in Ki/Mi/GiB scaled as necessary. + + * "git cherry-pick $blob" and "git cherry-pick $tree" are nonsense, + and a more readable error message e.g. "can't cherry-pick a tree" + is given (we used to say "expected exactly one commit"). + + * The "--annotate" option to "git send-email" can be turned on (or + off) by default with sendemail.annotate configuration variable (you + can use --no-annotate from the command line to override it). + + * The "--cover-letter" option to "git format-patch" can be turned on + (or off) by default with format.coverLetter configuration + variable. By setting it to 'auto', you can turn it on only for a + series with two or more patches. + + * The bash completion support (in contrib/) learned that cherry-pick + takes a few more options than it already knew about. + + * "git help" learned "-g" option to show the list of guides just like + list of commands are given with "-a". + + * A triangular "pull from one place, push to another place" workflow + is supported better by new remote.pushdefault (overrides the + "origin" thing) and branch.*.pushremote (overrides the + branch.*.remote) configuration variables. + + * "git status" learned to report that you are in the middle of a + revert session, just like it does for a cherry-pick and a bisect + session. + + * The handling by "git branch --set-upstream-to" against various forms + of erroneous inputs was suboptimal and has been improved. + + * When the interactive access to git-shell is not enabled, it issues + a message meant to help the system administrator to enable it. + An explicit way to help the end users who connect to the service by + issuing custom messages to refuse such an access has been added. + + * In addition to the case where the user edits the log message with + the "e)dit" option of "am -i", replace the "Applying: this patch" + message with the final log message contents after applymsg hook + munges it. + + * "git status" suggests users to look into using --untracked=no option + when it takes too long. + + * "git status" shows a bit more information to "git status" during a + rebase/bisect session. + + * "git fetch" learned to fetch a commit at the tip of an unadvertised + ref by specifying a raw object name from the command line when the + server side supports this feature. + + * Output from "git log --graph" works better with submodule log + output now. + + * "git count-objects -v" learned to report leftover temporary + packfiles and other garbage in the object store. + + * A new read-only credential helper (in contrib/) to interact with + the .netrc/.authinfo files has been added. + + * "git send-email" can be used with the credential helper system. + + * There was no Porcelain way to say "I no longer am interested in + this submodule", once you express your interest in a submodule with + "submodule init". "submodule deinit" is the way to do so. + + * "git pull --rebase" learned to pass "-v/-q" options to underlying + "git rebase". + + * The new "--follow-tags" option tells "git push" to push relevant + annotated tags when pushing branches out. + + * "git merge" and "git pull" can optionally be told to inspect and + reject when merging a commit that does not carry a trusted GPG + signature. + + * "git mergetool" now feeds files to the "p4merge" backend in the + order that matches the p4 convention, where "theirs" is usually + shown on the left side, which is the opposite from other backend + expects. + + * "show/log" now honors gpg.program configuration just like other + parts of the code that use GnuPG. + + * "git log" that shows the difference between the parent and the + child has been optimized somewhat. + + * "git difftool" allows the user to write into the temporary files + being shown; if the user makes changes to the working tree at the + same time, one of the changes has to be lost in such a case, but it + tells the user what happened and refrains from overwriting the copy + in the working tree. + + * There was no good way to ask "I have a random string that came from + outside world. I want to turn it into a 40-hex object name while + making sure such an object exists". A new peeling suffix ^{object} + can be used for that purpose, together with "rev-parse --verify". + + +Performance, Internal Implementation, etc. + + * Updates for building under msvc. + + * A handful of issues in the code to traverse working tree to find + untracked and/or ignored files have been fixed, and the general + codepath involved in "status -u" and "clean" have been cleaned up + and optimized. + + * The stack footprint of some codepaths that access an object from a + pack has been shrunk. + + * The logic to coalesce the same lines removed from the parents in + the output from "diff -c/--cc" has been updated, but with an O(n^2) + complexity, so this might turn out to be undesirable. + + * The code to enforce permission bits on files in $GIT_DIR/ for + shared repositories have been simplified. + + * A few codepaths knew how much data they need to put in the + hashtables they use upfront, but still started from a small table + repeatedly growing and rehashing. + + * The API to walk reflog entries from the latest to older, which was + necessary for operations such as "git checkout -", was cumbersome + to use correctly and also inefficient. + + * Codepaths that inspect log-message-to-be and decide when to add a + new Signed-off-by line in various commands have been consolidated. + + * The pkt-line API, implementation and its callers have been cleaned + up to make them more robust. + + * Cygwin port has a faster-but-lying lstat(2) emulation whose + incorrectness does not matter in practice except for a few + codepaths, and setting permission bits to directories is a codepath + that needs to use a more correct one. + + * "git checkout" had repeated pathspec matches on the same paths, + which have been consolidated. Also a bug in "git checkout dir/" + that is started from an unmerged index has been fixed. + + * A few bugfixes to "git rerere" working on corner case merge + conflicts have been applied. + + +Also contains various documentation updates and code clean-ups. + + +Fixes since v1.8.2 +------------------ + +Unless otherwise noted, all the fixes since v1.8.2 in the maintenance +track are contained in this release (see release notes to them for +details). + + * When receive-pack detects error in the pack header it received in + order to decide which of unpack-objects or index-pack to run, it + returned without closing the error stream, which led to a hang + sideband thread. + (merge 49ecfa1 jk/receive-pack-deadlocks-with-early-failure later to maint). + + * Zsh completion forgot that '%' character used to signal untracked + files needs to be escaped with another '%'. + (merge 24b6132 fc/untracked-zsh-prompt later to maint). + + * A commit object whose author or committer ident are malformed + crashed some code that trusted that a name, an email and an + timestamp can always be found in it. + (merge de5abe9 jk/chopped-ident later to maint). + + * When "upload-pack" fails while generating a pack in response to + "git fetch" (or "git clone"), the receiving side mistakenly said + there was a programming error to trigger the die handler + recursively. + (merge 1ece66b jk/a-thread-only-dies-once later to maint). + + * "rev-list --stdin" and friends kept bogus pointers into input + buffer around as human readble object names. This was not a huge + problem but was exposed by a new change that uses these names in + error output. + (merge 70d26c6 tr/copy-revisions-from-stdin later to maint). + + * Smart-capable HTTP servers were not restricted via the + GIT_NAMESPACE mechanism when talking with commit-walker clients, + like they do when talking with smart HTTP clients. + (merge 6130f86 jk/http-dumb-namespaces later to maint). + + * "git merge-tree" did not omit a merge result that is identical to + "our" side in certain cases. + (merge aacecc3 jk/merge-tree-added-identically later to maint). + + * Perl scripts like "git-svn" closed (not redirecting to /dev/null) + the standard error stream, which is not a very smart thing to do. + Later open may return file descriptor #2 for unrelated purpose, and + error reporting code may write into them. + (merge a749c0b tr/perl-keep-stderr-open later to maint). + + * "git show-branch" was not prepared to show a very long run of + ancestor operators e.g. foobar^2~2^2^2^2...^2~4 correctly. + (merge aaa07e3 jk/show-branch-strbuf later to maint). + + * "git diff --diff-algorithm algo" is also understood as "git diff + --diff-algorithm=algo". + (merge 0895c6d jk/diff-algo-finishing-touches later to maint). + + * The new core.commentchar configuration was not applied to a few + places. + (merge 89c3bbd rt/commentchar-fmt-merge-msg later to maint). + + * "git bundle" did not like a bundle created using a commit without + any message as its one of the prerequistes. + (merge 5446e33 lf/bundle-with-tip-wo-message later to maint). + + * "git log -S/-G" started paying attention to textconv filter, but + there was no way to disable this. Make it honor --no-textconv + option. + (merge 61690bf sr/log-SG-no-textconv later to maint). + + * When used with "-d temporary-directory" option, "git filter-branch" + failed to come back to the original working tree to perform the + final clean-up procedure. + (merge 9727601 jk/filter-branch-come-back-to-original later to maint). + + * "git merge $(git rev-parse v1.8.2)" behaved quite differently from + "git merge v1.8.2", as if v1.8.2 were written as v1.8.2^0 and did + not pay much attention to the annotated tag payload. Make the code + notice the type of the tag object, in addition to the dwim_ref() + based classification the current code uses (i.e. the name appears + in refs/tags/) to decide when to special case merging of tags. + (merge a38d3d7 jc/merge-tag-object later to maint). + + * Fix 1.8.1.x regression that stopped matching "dir" (without + trailing slash) to a directory "dir". + (merge efa5f82 jc/directory-attrs-regression-fix later to maint-1.8.1). + + * "git apply --whitespace=fix" was not prepared to see a line getting + longer after fixing whitespaces (e.g. tab-in-indent aka Python). + (merge 329b26e jc/apply-ws-fix-tab-in-indent later to maint-1.8.1). + + * The prompt string generator (in contrib/completion/) did not notice + when we are in a middle of a "git revert" session. + (merge 3ee4452 rr/prompt-revert-head later to maint). + + * "submodule summary --summary-limit" option did not support + "--option=value" form. + (merge 862ae6c rs/submodule-summary-limit later to maint). + + * "index-pack --fix-thin" used an uninitialized value to compute + delta depths of objects it appends to the resulting pack. + (merge 57165db jk/index-pack-correct-depth-fix later to maint). + + * "index-pack --verify-stat" used a few counters outside protection + of mutex, possibly showing incorrect numbers. + (merge 8f82aad nd/index-pack-threaded-fixes later to maint). + + * The code to keep track of what directory names are known to Git on + platforms with case insensitive filesystems can get confused upon a + hash collision between these pathnames and looped forever. + + * Annotated tags outside refs/tags/ hierarchy were not advertised + correctly to the ls-remote and fetch with recent version of Git. + + * Recent optimization broke shallow clones. + (merge f59de5d jk/peel-ref later to maint). + + * "git cmd -- ':(top'" was not diagnosed as an invalid syntax, and + instead the parser kept reading beyond the end of the string. + + * "git tag -f <tag>" always said "Updated tag '<tag>'" even when + creating a new tag (i.e. not overwriting nor updating). + + * "git p4" did not behave well when the path to the root of the P4 + client was not its real path. + (merge bbd8486 pw/p4-symlinked-root later to maint). + + * "git archive" reports a failure when asked to create an archive out + of an empty tree. It would be more intuitive to give an empty + archive back in such a case. + + * When "format-patch" quoted a non-ascii strings on the header files, + it incorrectly applied rfc2047 and chopped a single character in + the middle of it. + + * An aliased command spawned from a bare repository that does not say + it is bare with "core.bare = yes" is treated as non-bare by mistake. + + * In "git reflog expire", REACHABLE bit was not cleared from the + correct objects. + + * The logic used by "git diff -M --stat" to shorten the names of + files before and after a rename did not work correctly when the + common prefix and suffix between the two filenames overlapped. + + * The "--match=<pattern>" option of "git describe", when used with + "--all" to allow refs that are not annotated tags to be used as a + base of description, did not restrict the output from the command + to those that match the given pattern. + + * Clarify in the documentation "what" gets pushed to "where" when the + command line to "git push" does not say these explicitly. + + * The "--color=<when>" argument to the commands in the diff family + was described poorly. + + * The arguments given to pre-rebase hook were not documented. + + * The v4 index format was not documented. + + * The "--match=<pattern>" argument "git describe" takes uses glob + pattern but it wasn't obvious from the documentation. + + * Some sources failed to compile on systems that lack NI_MAXHOST in + their system header (e.g. z/OS). + + * Add an example use of "--env-filter" in "filter-branch" + documentation. + + * "git bundle verify" did not say "records a complete history" for a + bundle that does not have any prerequisites. + + * In the v1.8.0 era, we changed symbols that do not have to be global + to file scope static, but a few functions in graph.c were used by + CGit from sideways bypassing the entry points of the API the + in-tree users use. + + * "git update-index -h" did not do the usual "-h(elp)" thing. + + * "git index-pack" had a buffer-overflow while preparing an + informational message when the translated version of it was too + long. + + * 'git commit -m "$msg"' used to add an extra newline even when + $msg already ended with one. + + * The SSL peer verification done by "git imap-send" did not ask for + Server Name Indication (RFC 4366), failing to connect SSL/TLS + sites that serve multiple hostnames on a single IP. + + * perl/Git.pm::cat_blob slurped everything in core only to write it + out to a file descriptor, which was not a very smart thing to do. + + * "git branch" did not bother to check nonsense command line + parameters and issue errors in many cases. + + * Verification of signed tags were not done correctly when not in C + or en/US locale. + + * Some platforms and users spell UTF-8 differently; retry with the + most official "UTF-8" when the system does not understand the + user-supplied encoding name that are the common alternative + spellings of UTF-8. + + * When export-subst is used, "zip" output recorded incorrect + size of the file. + + * "git am $maildir/" applied messages in an unexpected order; sort + filenames read from the maildir/ in a way that is more likely to + sort messages in the order the writing MUA meant to, by sorting + numeric segment in numeric order and non-numeric segment in + alphabetical order. + + * "git submodule update", when recursed into sub-submodules, did not + accumulate the prefix paths. diff --git a/Documentation/config.txt b/Documentation/config.txt index bc750d5794..c67038b56d 100644 --- a/Documentation/config.txt +++ b/Documentation/config.txt @@ -412,7 +412,7 @@ repository's usual working tree). core.logAllRefUpdates:: Enable the reflog. Updates to a ref <ref> is logged to the file "$GIT_DIR/logs/<ref>", by appending the new and old - SHA1, the date/time and the reason of the update, but + SHA-1, the date/time and the reason of the update, but only when the file exists. If this configuration variable is set to true, missing "$GIT_DIR/logs/<ref>" file is automatically created for branch heads (i.e. under @@ -727,9 +727,22 @@ branch.autosetuprebase:: This option defaults to never. branch.<name>.remote:: - When in branch <name>, it tells 'git fetch' and 'git push' which - remote to fetch from/push to. It defaults to `origin` if no remote is - configured. `origin` is also used if you are not on any branch. + When on branch <name>, it tells 'git fetch' and 'git push' + which remote to fetch from/push to. The remote to push to + may be overridden with `remote.pushdefault` (for all branches). + The remote to push to, for the current branch, may be further + overridden by `branch.<name>.pushremote`. If no remote is + configured, or if you are not on any branch, it defaults to + `origin` for fetching and `remote.pushdefault` for pushing. + +branch.<name>.pushremote:: + When on branch <name>, it overrides `branch.<name>.remote` for + pushing. It also overrides `remote.pushdefault` for pushing + from branch <name>. When you pull from one place (e.g. your + upstream) and push to another place (e.g. your own publishing + repository), you would want to set `remote.pushdefault` to + specify the remote to push to for all branches, and use this + option to override it for a specific branch. branch.<name>.merge:: Defines, together with branch.<name>.remote, the upstream branch @@ -794,7 +807,8 @@ color.branch:: color.branch.<slot>:: Use customized color for branch coloration. `<slot>` is one of `current` (the current branch), `local` (a local branch), - `remote` (a remote-tracking branch in refs/remotes/), `plain` (other + `remote` (a remote-tracking branch in refs/remotes/), + `upstream` (upstream tracking branch), `plain` (other refs). + The value for these configuration variables is a list of colors (at most @@ -1096,6 +1110,11 @@ format.signoff:: the rights to submit this work under the same open source license. Please see the 'SubmittingPatches' document for further discussion. +format.coverLetter:: + A boolean that controls whether to generate a cover-letter when + format-patch is invoked, but in addition can be set to "auto", to + generate a cover-letter only when there's more than one patch. + filter.<driver>.clean:: The command which is used to convert the content of a worktree file to a blob upon checkin. See linkgit:gitattributes[5] for @@ -1447,6 +1466,14 @@ http.sslCAPath:: with when fetching or pushing over HTTPS. Can be overridden by the 'GIT_SSL_CAPATH' environment variable. +http.sslTry:: + Attempt to use AUTH SSL/TLS and encrypted data transfers + when connecting via regular FTP protocol. This might be needed + if the FTP server requires it for security reasons or you wish + to connect securely whenever remote FTP server supports it. + Default is false since it might trigger certificate verification + errors on misconfigured servers. + http.maxRequests:: How many HTTP requests to launch in parallel. Can be overridden by the 'GIT_HTTP_MAX_REQUESTS' environment variable. Default is 5. @@ -1898,6 +1925,11 @@ receive.updateserverinfo:: If set to true, git-receive-pack will run git-update-server-info after receiving data from git-push and updating refs. +remote.pushdefault:: + The remote to push to by default. Overrides + `branch.<name>.remote` for all branches, and is overridden by + `branch.<name>.pushremote` for specific branches. + remote.<name>.url:: The URL of a remote repository. See linkgit:git-fetch[1] or linkgit:git-push[1]. @@ -1998,6 +2030,7 @@ sendemail.<identity>.*:: sendemail.aliasesfile:: sendemail.aliasfiletype:: +sendemail.annotate:: sendemail.bcc:: sendemail.cc:: sendemail.cccmd:: @@ -2123,7 +2156,13 @@ uploadpack.hiderefs:: are under the hierarchies listed on the value of this variable is excluded, and is hidden from `git ls-remote`, `git fetch`, etc. An attempt to fetch a hidden ref by `git - fetch` will fail. + fetch` will fail. See also `uploadpack.allowtipsha1inwant`. + +uploadpack.allowtipsha1inwant:: + When `uploadpack.hiderefs` is in effect, allow `upload-pack` + to accept a fetch request that asks for an object at the tip + of a hidden ref (by default, such a request is rejected). + see also `uploadpack.hiderefs`. url.<base>.insteadOf:: Any URL that starts with this value will be rewritten to diff --git a/Documentation/git-add.txt b/Documentation/git-add.txt index b0944e57d5..48754cbc67 100644 --- a/Documentation/git-add.txt +++ b/Documentation/git-add.txt @@ -9,9 +9,9 @@ SYNOPSIS -------- [verse] 'git add' [-n] [-v] [--force | -f] [--interactive | -i] [--patch | -p] - [--edit | -e] [--all | [--update | -u]] [--intent-to-add | -N] - [--refresh] [--ignore-errors] [--ignore-missing] [--] - [<pathspec>...] + [--edit | -e] [--[no-]all | --[no-]ignore-removal | [--update | -u]] + [--intent-to-add | -N] [--refresh] [--ignore-errors] [--ignore-missing] + [--] [<pathspec>...] DESCRIPTION ----------- @@ -111,6 +111,7 @@ of Git, hence the form without <pathspec> should not be used. -A:: --all:: +--no-ignore-removal:: Update the index not only where the working tree has a file matching <pathspec> but also where the index already has an entry. This adds, modifies, and removes index entries to @@ -121,6 +122,19 @@ If no <pathspec> is given, the current version of Git defaults to and its subdirectories. This default will change in a future version of Git, hence the form without <pathspec> should not be used. +--no-all:: +--ignore-removal:: + Update the index by adding new files that are unknown to the + index and files modified in the working tree, but ignore + files that have been removed from the working tree. This + option is a no-op when no <pathspec> is used. ++ +This option is primarily to help the current users of Git, whose +"git add <pathspec>..." ignores removed files. In future versions +of Git, "git add <pathspec>..." will be a synonym to "git add -A +<pathspec>..." and "git add --ignore-removal <pathspec>..." will behave like +today's "git add <pathspec>...", ignoring removed files. + -N:: --intent-to-add:: Record only the fact that the path will be added later. An entry diff --git a/Documentation/git-cat-file.txt b/Documentation/git-cat-file.txt index 2fb95bbd19..30d585af5d 100644 --- a/Documentation/git-cat-file.txt +++ b/Documentation/git-cat-file.txt @@ -20,7 +20,7 @@ object type, or '-s' is used to find the object size, or '--textconv' is used (which implies type "blob"). In the second form, a list of objects (separated by linefeeds) is provided on -stdin, and the SHA1, type, and size of each object is printed on stdout. +stdin, and the SHA-1, type, and size of each object is printed on stdout. OPTIONS ------- @@ -58,11 +58,11 @@ OPTIONS to apply the filter to the content recorded in the index at <path>. --batch:: - Print the SHA1, type, size, and contents of each object provided on + Print the SHA-1, type, size, and contents of each object provided on stdin. May not be combined with any other options or arguments. --batch-check:: - Print the SHA1, type, and size of each object provided on stdin. May not + Print the SHA-1, type, and size of each object provided on stdin. May not be combined with any other options or arguments. OUTPUT diff --git a/Documentation/git-checkout.txt b/Documentation/git-checkout.txt index 8edcdcae9d..23a9413525 100644 --- a/Documentation/git-checkout.txt +++ b/Documentation/git-checkout.txt @@ -180,6 +180,12 @@ branch by running "git rm -rf ." from the top level of the working tree. Afterwards you will be ready to prepare your new files, repopulating the working tree, by copying them from elsewhere, extracting a tarball, etc. +--ignore-skip-worktree-bits:: + In sparse checkout mode, `git checkout -- <paths>` would + update only entries matched by <paths> and sparse patterns + in $GIT_DIR/info/sparse-checkout. This option ignores + the sparse patterns and adds back any files in <paths>. + -m:: --merge:: When switching branches, diff --git a/Documentation/git-commit-tree.txt b/Documentation/git-commit-tree.txt index 86ef56e7c8..cafdc9642d 100644 --- a/Documentation/git-commit-tree.txt +++ b/Documentation/git-commit-tree.txt @@ -10,7 +10,9 @@ SYNOPSIS -------- [verse] 'git commit-tree' <tree> [(-p <parent>)...] < changelog -'git commit-tree' [(-p <parent>)...] [(-m <message>)...] [(-F <file>)...] <tree> +'git commit-tree' [(-p <parent>)...] [-S[<keyid>]] [(-m <message>)...] + [(-F <file>)...] <tree> + DESCRIPTION ----------- @@ -52,6 +54,9 @@ OPTIONS Read the commit log message from the given file. Use `-` to read from the standard input. +-S[<keyid>]:: + GPG-sign commit. + Commit Information ------------------ diff --git a/Documentation/git-count-objects.txt b/Documentation/git-count-objects.txt index 23c80cea64..b300e846f1 100644 --- a/Documentation/git-count-objects.txt +++ b/Documentation/git-count-objects.txt @@ -8,7 +8,7 @@ git-count-objects - Count unpacked number of objects and their disk consumption SYNOPSIS -------- [verse] -'git count-objects' [-v] +'git count-objects' [-v] [-H | --human-readable] DESCRIPTION ----------- @@ -20,11 +20,29 @@ OPTIONS ------- -v:: --verbose:: - In addition to the number of loose objects and disk - space consumed, it reports the number of in-pack - objects, number of packs, disk space consumed by those packs, - and number of objects that can be removed by running - `git prune-packed`. + Report in more detail: ++ +count: the number of loose objects ++ +size: disk space consumed by loose objects, in KiB (unless -H is specified) ++ +in-pack: the number of in-pack objects ++ +size-pack: disk space consumed by the packs, in KiB (unless -H is specified) ++ +prune-packable: the number of loose objects that are also present in +the packs. These objects could be pruned using `git prune-packed`. ++ +garbage: the number of files in object database that are not valid +loose objects nor valid packs ++ +size-garbage: disk space consumed by garbage files, in KiB (unless -H is +specified) + +-H:: +--human-readable:: + +Print sizes in human readable format GIT --- diff --git a/Documentation/git-daemon.txt b/Documentation/git-daemon.txt index 77da564134..bfb106cccd 100644 --- a/Documentation/git-daemon.txt +++ b/Documentation/git-daemon.txt @@ -147,6 +147,13 @@ OPTIONS Giving these options is an error when used with `--inetd`; use the facility of inet daemon to achieve the same before spawning 'git daemon' if needed. ++ +Like many programs that switch user id, the daemon does not reset +environment variables such as `$HOME` when it runs git programs, +e.g. `upload-pack` and `receive-pack`. When using this option, you +may also want to set and export `HOME` to point at the home +directory of `<user>` before starting the daemon, and make sure any +Git configuration files in that directory are readable by `<user>`. --enable=<service>:: --disable=<service>:: diff --git a/Documentation/git-describe.txt b/Documentation/git-describe.txt index 3c81e85ec5..28e5ec0e2c 100644 --- a/Documentation/git-describe.txt +++ b/Documentation/git-describe.txt @@ -149,7 +149,7 @@ is found, its name will be output and searching will stop. If an exact match was not found, 'git describe' will walk back through the commit history to locate an ancestor commit which has been tagged. The ancestor's tag will be output along with an -abbreviation of the input committish's SHA1. +abbreviation of the input committish's SHA-1. If multiple tags were found during the walk then the tag which has the fewest commits different from the input committish will be diff --git a/Documentation/git-difftool.txt b/Documentation/git-difftool.txt index e0e12e9470..8361e6e4e3 100644 --- a/Documentation/git-difftool.txt +++ b/Documentation/git-difftool.txt @@ -72,10 +72,12 @@ with custom merge tool commands and has the same value as `$MERGED`. --symlinks:: --no-symlinks:: 'git difftool''s default behavior is create symlinks to the - working tree when run in `--dir-diff` mode. + working tree when run in `--dir-diff` mode and the right-hand + side of the comparison yields the same content as the file in + the working tree. + - Specifying `--no-symlinks` instructs 'git difftool' to create - copies instead. `--no-symlinks` is the default on Windows. +Specifying `--no-symlinks` instructs 'git difftool' to create copies +instead. `--no-symlinks` is the default on Windows. -x <command>:: --extcmd=<command>:: diff --git a/Documentation/git-fast-export.txt b/Documentation/git-fast-export.txt index d6487e1ce0..03fc8c39d8 100644 --- a/Documentation/git-fast-export.txt +++ b/Documentation/git-fast-export.txt @@ -27,15 +27,17 @@ OPTIONS Insert 'progress' statements every <n> objects, to be shown by 'git fast-import' during import. ---signed-tags=(verbatim|warn|strip|abort):: +--signed-tags=(verbatim|warn|warn-strip|strip|abort):: Specify how to handle signed tags. Since any transformation after the export can change the tag names (which can also happen when excluding revisions) the signatures will not match. + When asking to 'abort' (which is the default), this program will die -when encountering a signed tag. With 'strip', the tags will be made -unsigned, with 'verbatim', they will be silently exported -and with 'warn', they will be exported, but you will see a warning. +when encountering a signed tag. With 'strip', the tags will silently +be made unsigned, with 'warn-strip' they will be made unsigned but a +warning will be displayed, with 'verbatim', they will be silently +exported and with 'warn', they will be exported, but you will see a +warning. --tag-of-filtered-object=(abort|drop|rewrite):: Specify how to handle tags whose tagged object is filtered out. @@ -66,6 +68,8 @@ produced incorrect results if you gave these options. incremental runs. As <file> is only opened and truncated at completion, the same path can also be safely given to \--import-marks. + The file will not be written if no new object has been + marked/exported. --import-marks=<file>:: Before processing any input, load the marks specified in diff --git a/Documentation/git-format-patch.txt b/Documentation/git-format-patch.txt index 3a62f50eda..39118774af 100644 --- a/Documentation/git-format-patch.txt +++ b/Documentation/git-format-patch.txt @@ -20,7 +20,7 @@ SYNOPSIS [--ignore-if-in-upstream] [--subject-prefix=Subject-Prefix] [(--reroll-count|-v) <n>] [--to=<email>] [--cc=<email>] - [--cover-letter] [--quiet] [--notes[=<ref>]] + [--[no-]cover-letter] [--quiet] [--notes[=<ref>]] [<common diff options>] [ <since> | <revision range> ] @@ -195,7 +195,7 @@ will want to ensure that threading is disabled for `git send-email`. `Cc:`, and custom) headers added so far from config or command line. ---cover-letter:: +--[no-]cover-letter:: In addition to the patches, generate a cover letter file containing the shortlog and the overall diffstat. You can fill in a description in the file before sending it out. @@ -260,6 +260,7 @@ attachments, and sign off patches with configuration variables. cc = <email> attach [ = mime-boundary-string ] signoff = true + coverletter = auto ------------ diff --git a/Documentation/git-fsck.txt b/Documentation/git-fsck.txt index eff91889d7..e5878bd97b 100644 --- a/Documentation/git-fsck.txt +++ b/Documentation/git-fsck.txt @@ -23,7 +23,7 @@ OPTIONS An object to treat as the head of an unreachability trace. + If no objects are given, 'git fsck' defaults to using the -index file, all SHA1 references in `refs` namespace, and all reflogs +index file, all SHA-1 references in `refs` namespace, and all reflogs (unless --no-reflogs is given) as heads. --unreachable:: @@ -89,7 +89,7 @@ index file, all SHA1 references in `refs` namespace, and all reflogs DISCUSSION ---------- -git-fsck tests SHA1 and general object sanity, and it does full tracking +git-fsck tests SHA-1 and general object sanity, and it does full tracking of the resulting reachability and everything else. It prints out any corruption it finds (missing or bad objects), and if you use the '--unreachable' flag it will also print out objects that exist but that diff --git a/Documentation/git-help.txt b/Documentation/git-help.txt index e07b6dc19a..b21e9d79be 100644 --- a/Documentation/git-help.txt +++ b/Documentation/git-help.txt @@ -8,31 +8,45 @@ git-help - Display help information about Git SYNOPSIS -------- [verse] -'git help' [-a|--all|-i|--info|-m|--man|-w|--web] [COMMAND] +'git help' [-a|--all] [-g|--guide] + [-i|--info|-m|--man|-w|--web] [COMMAND|GUIDE] DESCRIPTION ----------- -With no options and no COMMAND given, the synopsis of the 'git' +With no options and no COMMAND or GUIDE given, the synopsis of the 'git' command and a list of the most commonly used Git commands are printed on the standard output. -If the option '--all' or '-a' is given, then all available commands are +If the option '--all' or '-a' is given, all available commands are printed on the standard output. -If a Git subcommand is named, a manual page for that subcommand is brought -up. The 'man' program is used by default for this purpose, but this -can be overridden by other options or configuration variables. +If the option '--guide' or '-g' is given, a list of the useful +Git guides is also printed on the standard output. + +If a command, or a guide, is given, a manual page for that command or +guide is brought up. The 'man' program is used by default for this +purpose, but this can be overridden by other options or configuration +variables. Note that `git --help ...` is identical to `git help ...` because the former is internally converted into the latter. +To display the linkgit:git[1] man page, use `git help git`. + +This page can be displayed with 'git help help' or `git help --help` + OPTIONS ------- -a:: --all:: Prints all the available commands on the standard output. This - option supersedes any other option. + option overrides any given command or guide name. + +-g:: +--guides:: + Prints a list of useful guides on the standard output. This + option overrides any given command or guide name. -i:: --info:: diff --git a/Documentation/git-http-backend.txt b/Documentation/git-http-backend.txt index 7b1e85cd15..e3bcdb50e3 100644 --- a/Documentation/git-http-backend.txt +++ b/Documentation/git-http-backend.txt @@ -80,7 +80,30 @@ ScriptAlias /git/ /usr/libexec/git-core/git-http-backend/ ---------------------------------------------------------------- + To enable anonymous read access but authenticated write access, -require authorization with a LocationMatch directive: +require authorization for both the initial ref advertisement (which we +detect as a push via the service parameter in the query string), and the +receive-pack invocation itself: ++ +---------------------------------------------------------------- +RewriteCond %{QUERY_STRING} service=git-receive-pack [OR] +RewriteCond %{REQUEST_URI} /git-receive-pack$ +RewriteRule ^/git/ - [E=AUTHREQUIRED:yes] + +<LocationMatch "^/git/"> + Order Deny,Allow + Deny from env=AUTHREQUIRED + + AuthType Basic + AuthName "Git Access" + Require group committers + Satisfy Any + ... +</LocationMatch> +---------------------------------------------------------------- ++ +If you do not have `mod_rewrite` available to match against the query +string, it is sufficient to just protect `git-receive-pack` itself, +like: + ---------------------------------------------------------------- <LocationMatch "^/git/.*/git-receive-pack$"> @@ -91,6 +114,15 @@ require authorization with a LocationMatch directive: </LocationMatch> ---------------------------------------------------------------- + +In this mode, the server will not request authentication until the +client actually starts the object negotiation phase of the push, rather +than during the initial contact. For this reason, you must also enable +the `http.receivepack` config option in any repositories that should +accept a push. The default behavior, if `http.receivepack` is not set, +is to reject any pushes by unauthenticated users; the initial request +will therefore report `403 Forbidden` to the client, without even giving +an opportunity for authentication. ++ To require authentication for both reads and writes, use a Location directive around the repository, or one of its parent directories: + @@ -158,6 +190,54 @@ ScriptAliasMatch \ ScriptAlias /git/ /var/www/cgi-bin/gitweb.cgi/ ---------------------------------------------------------------- +Lighttpd:: + Ensure that `mod_cgi`, `mod_alias, `mod_auth`, `mod_setenv` are + loaded, then set `GIT_PROJECT_ROOT` appropriately and redirect + all requests to the CGI: ++ +---------------------------------------------------------------- +alias.url += ( "/git" => "/usr/lib/git-core/git-http-backend" ) +$HTTP["url"] =~ "^/git" { + cgi.assign = ("" => "") + setenv.add-environment = ( + "GIT_PROJECT_ROOT" => "/var/www/git", + "GIT_HTTP_EXPORT_ALL" => "" + ) +} +---------------------------------------------------------------- ++ +To enable anonymous read access but authenticated write access: ++ +---------------------------------------------------------------- +$HTTP["querystring"] =~ "service=git-receive-pack" { + include "git-auth.conf" +} +$HTTP["url"] =~ "^/git/.*/git-receive-pack$" { + include "git-auth.conf" +} +---------------------------------------------------------------- ++ +where `git-auth.conf` looks something like: ++ +---------------------------------------------------------------- +auth.require = ( + "/" => ( + "method" => "basic", + "realm" => "Git Access", + "require" => "valid-user" + ) +) +# ...and set up auth.backend here +---------------------------------------------------------------- ++ +To require authentication for both reads and writes: ++ +---------------------------------------------------------------- +$HTTP["url"] =~ "^/git/private" { + include "git-auth.conf" +} +---------------------------------------------------------------- + ENVIRONMENT ----------- diff --git a/Documentation/git-index-pack.txt b/Documentation/git-index-pack.txt index 36adc5fc14..bde8eec30d 100644 --- a/Documentation/git-index-pack.txt +++ b/Documentation/git-index-pack.txt @@ -89,7 +89,7 @@ Note ---- Once the index has been created, the list of object names is sorted -and the SHA1 hash of that list is printed to stdout. If --stdin was +and the SHA-1 hash of that list is printed to stdout. If --stdin was also used then this is prefixed by either "pack\t", or "keep\t" if a new .keep file was successfully created. This is useful to remove a .keep file used as a lock to prevent the race with 'git repack' diff --git a/Documentation/git-ls-files.txt b/Documentation/git-ls-files.txt index 0bdebff6f7..c0856a6e0a 100644 --- a/Documentation/git-ls-files.txt +++ b/Documentation/git-ls-files.txt @@ -164,7 +164,7 @@ which case it outputs: 'git ls-files --unmerged' and 'git ls-files --stage' can be used to examine detailed information on unmerged paths. -For an unmerged path, instead of recording a single mode/SHA1 pair, +For an unmerged path, instead of recording a single mode/SHA-1 pair, the index records up to three such pairs; one from tree O in stage 1, A in stage 2, and B in stage 3. This information can be used by the user (or the porcelain) to see what should eventually be recorded at the diff --git a/Documentation/git-merge-index.txt b/Documentation/git-merge-index.txt index 0c80cec0e8..02676fb391 100644 --- a/Documentation/git-merge-index.txt +++ b/Documentation/git-merge-index.txt @@ -14,7 +14,7 @@ SYNOPSIS DESCRIPTION ----------- This looks up the <file>(s) in the index and, if there are any merge -entries, passes the SHA1 hash for those files as arguments 1, 2, 3 (empty +entries, passes the SHA-1 hash for those files as arguments 1, 2, 3 (empty argument if no file), and <file> as argument 4. File modes for the three files are passed as arguments 5, 6 and 7. diff --git a/Documentation/git-pack-objects.txt b/Documentation/git-pack-objects.txt index 69c9313cf5..d94edcd4b4 100644 --- a/Documentation/git-pack-objects.txt +++ b/Documentation/git-pack-objects.txt @@ -50,7 +50,7 @@ base-name:: Write into a pair of files (.pack and .idx), using <base-name> to determine the name of the created file. When this option is used, the two files are written in - <base-name>-<SHA1>.{pack,idx} files. <SHA1> is a hash + <base-name>-<SHA-1>.{pack,idx} files. <SHA-1> is a hash of the sorted object names to make the resulting filename based on the pack content, and written to the standard output of the command. diff --git a/Documentation/git-patch-id.txt b/Documentation/git-patch-id.txt index 90268f02e7..312c3b1fe5 100644 --- a/Documentation/git-patch-id.txt +++ b/Documentation/git-patch-id.txt @@ -12,7 +12,7 @@ SYNOPSIS DESCRIPTION ----------- -A "patch ID" is nothing but a SHA1 of the diff associated with a patch, with +A "patch ID" is nothing but a SHA-1 of the diff associated with a patch, with whitespace and line numbers ignored. As such, it's "reasonably stable", but at the same time also reasonably unique, i.e., two patches that have the same "patch ID" are almost guaranteed to be the same thing. diff --git a/Documentation/git-push.txt b/Documentation/git-push.txt index 577d201c00..eb2883c94c 100644 --- a/Documentation/git-push.txt +++ b/Documentation/git-push.txt @@ -9,7 +9,7 @@ git-push - Update remote refs along with associated objects SYNOPSIS -------- [verse] -'git push' [--all | --mirror | --tags] [-n | --dry-run] [--receive-pack=<git-receive-pack>] +'git push' [--all | --mirror | --tags] [--follow-tags] [-n | --dry-run] [--receive-pack=<git-receive-pack>] [--repo=<repository>] [-f | --force] [--prune] [-v | --verbose] [-u | --set-upstream] [<repository> [<refspec>...]] @@ -117,6 +117,12 @@ already exists on the remote side. addition to refspecs explicitly listed on the command line. +--follow-tags:: + Push all the refs that would be pushed without this option, + and also push annotated tags in `refs/tags` that are missing + from the remote but are pointing at committish that are + reachable from the refs being pushed. + --receive-pack=<git-receive-pack>:: --exec=<git-receive-pack>:: Path to the 'git-receive-pack' program on the remote diff --git a/Documentation/git-replace.txt b/Documentation/git-replace.txt index 0142cd18ae..e0b4057976 100644 --- a/Documentation/git-replace.txt +++ b/Documentation/git-replace.txt @@ -16,8 +16,8 @@ DESCRIPTION ----------- Adds a 'replace' reference in `refs/replace/` namespace. -The name of the 'replace' reference is the SHA1 of the object that is -replaced. The content of the 'replace' reference is the SHA1 of the +The name of the 'replace' reference is the SHA-1 of the object that is +replaced. The content of the 'replace' reference is the SHA-1 of the replacement object. Unless `-f` is given, the 'replace' reference must not yet exist. diff --git a/Documentation/git-rev-parse.txt b/Documentation/git-rev-parse.txt index 10a116faf8..947d62fd25 100644 --- a/Documentation/git-rev-parse.txt +++ b/Documentation/git-rev-parse.txt @@ -60,8 +60,19 @@ OPTIONS instead. --verify:: - The parameter given must be usable as a single, valid - object name. Otherwise barf and abort. + Verify that exactly one parameter is provided, and that it + can be turned into a raw 20-byte SHA-1 that can be used to + access the object database. If so, emit it to the standard + output; otherwise, error out. ++ +If you want to make sure that the output actually names an object in +your object database and/or can be used as a specific type of object +you require, you can add "^{type}" peeling operator to the parmeter. +For example, `git rev-parse "$VAR^{commit}"` will make sure `$VAR` +names an existing object that is a commit-ish (i.e. a commit, or an +annotated tag that points at a commit). To make sure that `$VAR` +names an existing object of any type, `git rev-parse "$VAR^{object}"` +can be used. -q:: --quiet:: @@ -84,7 +95,7 @@ OPTIONS one. --symbolic:: - Usually the object names are output in SHA1 form (with + Usually the object names are output in SHA-1 form (with possible '{caret}' prefix); this option makes them output in a form as close to the original input as possible. @@ -169,7 +180,7 @@ print a message to stderr and exit with nonzero status. --short:: --short=number:: - Instead of outputting the full SHA1 values of object names try to + Instead of outputting the full SHA-1 values of object names try to abbreviate them to a shorter unique name. When no length is specified 7 is used. The minimum length is 4. @@ -308,12 +319,12 @@ $ git rev-parse --verify HEAD * Print the commit object name from the revision in the $REV shell variable: + ------------ -$ git rev-parse --verify $REV +$ git rev-parse --verify $REV^{commit} ------------ + This will error out if $REV is empty or not a valid revision. -* Same as above: +* Similar to above: + ------------ $ git rev-parse --default master --verify $REV diff --git a/Documentation/git-rm.txt b/Documentation/git-rm.txt index 92bac27e05..1d876c2619 100644 --- a/Documentation/git-rm.txt +++ b/Documentation/git-rm.txt @@ -149,6 +149,10 @@ files that aren't ignored are present in the submodules work tree. Ignored files are deemed expendable and won't stop a submodule's work tree from being removed. +If you only want to remove the local checkout of a submodule from your +work tree without committing the removal, +use linkgit:git-submodule[1] `deinit` instead. + EXAMPLES -------- `git rm Documentation/\*.txt`:: diff --git a/Documentation/git-send-email.txt b/Documentation/git-send-email.txt index 44a1f7c4e8..40a9a9abc1 100644 --- a/Documentation/git-send-email.txt +++ b/Documentation/git-send-email.txt @@ -45,8 +45,9 @@ Composing ~~~~~~~~~ --annotate:: - Review and edit each patch you're about to send. See the - CONFIGURATION section for 'sendemail.multiedit'. + Review and edit each patch you're about to send. Default is the value + of 'sendemail.annotate'. See the CONFIGURATION section for + 'sendemail.multiedit'. --bcc=<address>:: Specify a "Bcc:" value for each email. Default is the value of @@ -164,8 +165,8 @@ Sending Furthermore, passwords need not be specified in configuration files or on the command line. If a username has been specified (with '--smtp-user' or a 'sendemail.smtpuser'), but no password has been -specified (with '--smtp-pass' or 'sendemail.smtppass'), then the -user is prompted for a password while the input is masked for privacy. +specified (with '--smtp-pass' or 'sendemail.smtppass'), then +a password is obtained using 'git-credential'. --smtp-server=<host>:: If set, specifies the outgoing SMTP server to use (e.g. diff --git a/Documentation/git-sh-setup.txt b/Documentation/git-sh-setup.txt index 6a9f66d1d9..5d709d02c3 100644 --- a/Documentation/git-sh-setup.txt +++ b/Documentation/git-sh-setup.txt @@ -82,6 +82,12 @@ get_author_ident_from_commit:: outputs code for use with eval to set the GIT_AUTHOR_NAME, GIT_AUTHOR_EMAIL and GIT_AUTHOR_DATE variables for a given commit. +create_virtual_base:: + modifies the first file so only lines in common with the + second file remain. If there is insufficient common material, + then the first file is left empty. The result is suitable + as a virtual base input for a 3-way merge. + GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-shell.txt b/Documentation/git-shell.txt index 9b9250600f..c35051ba58 100644 --- a/Documentation/git-shell.txt +++ b/Documentation/git-shell.txt @@ -9,25 +9,81 @@ git-shell - Restricted login shell for Git-only SSH access SYNOPSIS -------- [verse] -'git shell' [-c <command> <argument>] +'chsh' -s $(command -v git-shell) <user> +'git clone' <user>`@localhost:/path/to/repo.git` +'ssh' <user>`@localhost` DESCRIPTION ----------- -A login shell for SSH accounts to provide restricted Git access. When -'-c' is given, the program executes <command> non-interactively; -<command> can be one of 'git receive-pack', 'git upload-pack', 'git -upload-archive', 'cvs server', or a command in COMMAND_DIR. The shell -is started in interactive mode when no arguments are given; in this -case, COMMAND_DIR must exist, and any of the executables in it can be -invoked. +This is a login shell for SSH accounts to provide restricted Git access. +It permits execution only of server-side Git commands implementing the +pull/push functionality, plus custom commands present in a subdirectory +named `git-shell-commands` in the user's home directory. -'cvs server' is a special command which executes git-cvsserver. +COMMANDS +-------- + +'git shell' accepts the following commands after the '-c' option: + +'git receive-pack <argument>':: +'git upload-pack <argument>':: +'git upload-archive <argument>':: + Call the corresponding server-side command to support + the client's 'git push', 'git fetch', or 'git archive --remote' + request. +'cvs server':: + Imitate a CVS server. See linkgit:git-cvsserver[1]. + +If a `~/git-shell-commands` directory is present, 'git shell' will +also handle other, custom commands by running +"`git-shell-commands/<command> <arguments>`" from the user's home +directory. + +INTERACTIVE USE +--------------- + +By default, the commands above can be executed only with the '-c' +option; the shell is not interactive. -COMMAND_DIR is the path "$HOME/git-shell-commands". The user must have -read and execute permissions to the directory in order to execute the -programs in it. The programs are executed with a cwd of $HOME, and -<argument> is parsed as a command-line string. +If a `~/git-shell-commands` directory is present, 'git shell' +can also be run interactively (with no arguments). If a `help` +command is present in the `git-shell-commands` directory, it is +run to provide the user with an overview of allowed actions. Then a +"git> " prompt is presented at which one can enter any of the +commands from the `git-shell-commands` directory, or `exit` to close +the connection. + +Generally this mode is used as an administrative interface to allow +users to list repositories they have access to, create, delete, or +rename repositories, or change repository descriptions and +permissions. + +If a `no-interactive-login` command exists, then it is run and the +interactive shell is aborted. + +EXAMPLE +------- + +To disable interactive logins, displaying a greeting instead: ++ +---------------- +$ chsh -s /usr/bin/git-shell +$ mkdir $HOME/git-shell-commands +$ cat >$HOME/git-shell-commands/no-interactive-login <<\EOF +#!/bin/sh +printf '%s\n' "Hi $USER! You've successfully authenticated, but I do not" +printf '%s\n' "provide interactive shell access." +exit 128 +EOF +$ chmod +x $HOME/git-shell-commands/no-interactive-login +---------------- + +SEE ALSO +-------- +ssh(1), +linkgit:git-daemon[1], +contrib/git-shell-commands/README GIT --- diff --git a/Documentation/git-show-branch.txt b/Documentation/git-show-branch.txt index a8e77b5350..a515648ab0 100644 --- a/Documentation/git-show-branch.txt +++ b/Documentation/git-show-branch.txt @@ -31,7 +31,7 @@ no <rev> nor <glob> is given on the command line. OPTIONS ------- <rev>:: - Arbitrary extended SHA1 expression (see linkgit:gitrevisions[7]) + Arbitrary extended SHA-1 expression (see linkgit:gitrevisions[7]) that typically names a branch head or a tag. <glob>:: @@ -142,7 +142,7 @@ displayed, indented N places. If a commit is on the I-th branch, the I-th indentation character shows a `+` sign; otherwise it shows a space. Merge commits are denoted by a `-` sign. Each commit shows a short name that -can be used as an extended SHA1 to name that commit. +can be used as an extended SHA-1 to name that commit. The following example shows three branches, "master", "fixes" and "mhf": diff --git a/Documentation/git-show-index.txt b/Documentation/git-show-index.txt index 9cbbed944c..fbdc8adae5 100644 --- a/Documentation/git-show-index.txt +++ b/Documentation/git-show-index.txt @@ -19,7 +19,7 @@ Reads given idx file for packed Git archive created with The information it outputs is subset of what you can get from 'git verify-pack -v'; this command only shows the packfile -offset and SHA1 of each object. +offset and SHA-1 of each object. GIT --- diff --git a/Documentation/git-show-ref.txt b/Documentation/git-show-ref.txt index 5dbcd47fec..de4d352da2 100644 --- a/Documentation/git-show-ref.txt +++ b/Documentation/git-show-ref.txt @@ -50,8 +50,8 @@ OPTIONS -s:: --hash[=<n>]:: - Only show the SHA1 hash, not the reference name. When combined with - --dereference the dereferenced tag will still be shown after the SHA1. + Only show the SHA-1 hash, not the reference name. When combined with + --dereference the dereferenced tag will still be shown after the SHA-1. --verify:: diff --git a/Documentation/git-submodule.txt b/Documentation/git-submodule.txt index c99d795618..74d5bdc59d 100644 --- a/Documentation/git-submodule.txt +++ b/Documentation/git-submodule.txt @@ -13,6 +13,7 @@ SYNOPSIS [--reference <repository>] [--] <repository> [<path>] 'git submodule' [--quiet] status [--cached] [--recursive] [--] [<path>...] 'git submodule' [--quiet] init [--] [<path>...] +'git submodule' [--quiet] deinit [-f|--force] [--] <path>... 'git submodule' [--quiet] update [--init] [--remote] [-N|--no-fetch] [-f|--force] [--rebase] [--reference <repository>] [--merge] [--recursive] [--] [<path>...] @@ -135,6 +136,19 @@ init:: the explicit 'init' step if you do not intend to customize any submodule locations. +deinit:: + Unregister the given submodules, i.e. remove the whole + `submodule.$name` section from .git/config together with their work + tree. Further calls to `git submodule update`, `git submodule foreach` + and `git submodule sync` will skip any unregistered submodules until + they are initialized again, so use this command if you don't want to + have a local checkout of the submodule in your work tree anymore. If + you really want to remove a submodule from the repository and commit + that use linkgit:git-rm[1] instead. ++ +If `--force` is specified, the submodule's work tree will be removed even if +it contains local modifications. + update:: Update the registered submodules, i.e. clone missing submodules and checkout the commit specified in the index of the containing repository. @@ -214,8 +228,10 @@ OPTIONS -f:: --force:: - This option is only valid for add and update commands. + This option is only valid for add, deinit and update commands. When running add, allow adding an otherwise ignored submodule path. + When running deinit the submodule work trees will be removed even if + they contain local changes. When running update, throw away local changes in submodules when switching to a different commit; and always run a checkout operation in the submodule, even if the commit listed in the index of the diff --git a/Documentation/git-tag.txt b/Documentation/git-tag.txt index b21aa87fe8..22894cbee6 100644 --- a/Documentation/git-tag.txt +++ b/Documentation/git-tag.txt @@ -33,7 +33,7 @@ in the tag message. If `-m <msg>` or `-F <file>` is given and `-a`, `-s`, and `-u <key-id>` are absent, `-a` is implied. -Otherwise just a tag reference for the SHA1 object name of the commit object is +Otherwise just a tag reference for the SHA-1 object name of the commit object is created (i.e. a lightweight tag). A GnuPG signed tag object will be created when `-s` or `-u diff --git a/Documentation/git-update-index.txt b/Documentation/git-update-index.txt index c92775829b..670e9fb2c2 100644 --- a/Documentation/git-update-index.txt +++ b/Documentation/git-update-index.txt @@ -247,7 +247,7 @@ $ git update-index --index-info ------------ The first line of the input feeds 0 as the mode to remove the -path; the SHA1 does not matter as long as it is well formatted. +path; the SHA-1 does not matter as long as it is well formatted. Then the second and third line feeds stage 1 and stage 2 entries for that path. After the above, we would end up with this: diff --git a/Documentation/git-verify-pack.txt b/Documentation/git-verify-pack.txt index 0eb9ffbdd2..526ba7be9c 100644 --- a/Documentation/git-verify-pack.txt +++ b/Documentation/git-verify-pack.txt @@ -40,11 +40,11 @@ OUTPUT FORMAT ------------- When specifying the -v option the format used is: - SHA1 type size size-in-pack-file offset-in-packfile + SHA-1 type size size-in-pack-file offset-in-packfile for objects that are not deltified in the pack, and - SHA1 type size size-in-packfile offset-in-packfile depth base-SHA1 + SHA-1 type size size-in-packfile offset-in-packfile depth base-SHA-1 for objects that are deltified. diff --git a/Documentation/git-verify-tag.txt b/Documentation/git-verify-tag.txt index e996135be9..f88ba96f02 100644 --- a/Documentation/git-verify-tag.txt +++ b/Documentation/git-verify-tag.txt @@ -21,7 +21,7 @@ OPTIONS Print the contents of the tag object before validating it. <tag>...:: - SHA1 identifiers of Git tag objects. + SHA-1 identifiers of Git tag objects. GIT --- diff --git a/Documentation/git.txt b/Documentation/git.txt index 6a875f2ade..8438c076c3 100644 --- a/Documentation/git.txt +++ b/Documentation/git.txt @@ -43,9 +43,10 @@ unreleased) version of Git, that is available from 'master' branch of the `git.git` repository. Documentation for older releases are available here: -* link:v1.8.2.1/git.html[documentation for release 1.8.2.1] +* link:v1.8.2.2/git.html[documentation for release 1.8.2.2] * release notes for + link:RelNotes/1.8.2.2.txt[1.8.2.2]. link:RelNotes/1.8.2.1.txt[1.8.2.1]. link:RelNotes/1.8.2.txt[1.8.2]. @@ -741,7 +742,7 @@ where: <old|new>-file:: are files GIT_EXTERNAL_DIFF can use to read the contents of <old|new>, - <old|new>-hex:: are the 40-hexdigit SHA1 hashes, + <old|new>-hex:: are the 40-hexdigit SHA-1 hashes, <old|new>-mode:: are the octal representation of the file modes. + The file parameters can point at the user's working file @@ -864,7 +865,7 @@ The commit, equivalent to what other systems call a "changeset" or represents an immediately preceding step. Commits with more than one parent represent merges of independent lines of development. -All objects are named by the SHA1 hash of their contents, normally +All objects are named by the SHA-1 hash of their contents, normally written as a string of 40 hex digits. Such names are globally unique. The entire history leading up to a commit can be vouched for by signing just that commit. A fourth object type, the tag, is provided for this @@ -874,9 +875,9 @@ When first created, objects are stored in individual files, but for efficiency may later be compressed together into "pack files". Named pointers called refs mark interesting points in history. A ref -may contain the SHA1 name of an object or the name of another ref. Refs -with names beginning `ref/head/` contain the SHA1 name of the most -recent commit (or "head") of a branch under development. SHA1 names of +may contain the SHA-1 name of an object or the name of another ref. Refs +with names beginning `ref/head/` contain the SHA-1 name of the most +recent commit (or "head") of a branch under development. SHA-1 names of tags of interest are stored under `ref/tags/`. A special ref named `HEAD` contains the name of the currently checked-out branch. diff --git a/Documentation/gitcore-tutorial.txt b/Documentation/gitcore-tutorial.txt index 59c1c17cca..f538a870c7 100644 --- a/Documentation/gitcore-tutorial.txt +++ b/Documentation/gitcore-tutorial.txt @@ -106,9 +106,9 @@ branch. A number of the Git tools will assume that `.git/HEAD` is valid, though. [NOTE] -An 'object' is identified by its 160-bit SHA1 hash, aka 'object name', +An 'object' is identified by its 160-bit SHA-1 hash, aka 'object name', and a reference to an object is always the 40-byte hex -representation of that SHA1 name. The files in the `refs` +representation of that SHA-1 name. The files in the `refs` subdirectory are expected to contain these hex references (usually with a final `\n` at the end), and you should thus expect to see a number of 41-byte files containing these @@ -763,7 +763,7 @@ already discussed, the `HEAD` branch is nothing but a symlink to one of these object pointers. You can at any time create a new branch by just picking an arbitrary -point in the project history, and just writing the SHA1 name of that +point in the project history, and just writing the SHA-1 name of that object into a file under `.git/refs/heads/`. You can use any filename you want (and indeed, subdirectories), but the convention is that the "normal" branch is called `master`. That's just a convention, though, @@ -1233,7 +1233,7 @@ file (the first tree goes to stage 1, the second to stage 2, etc.). After reading three trees into three stages, the paths that are the same in all three stages are 'collapsed' into stage 0. Also paths that are the same in two of three stages are -collapsed into stage 0, taking the SHA1 from either stage 2 or +collapsed into stage 0, taking the SHA-1 from either stage 2 or stage 3, whichever is different from stage 1 (i.e. only one side changed from the common ancestor). diff --git a/Documentation/gitdiffcore.txt b/Documentation/gitdiffcore.txt index 4ed71c76cb..568d75783a 100644 --- a/Documentation/gitdiffcore.txt +++ b/Documentation/gitdiffcore.txt @@ -108,7 +108,7 @@ it changes it to: For the purpose of breaking a filepair, diffcore-break examines the extent of changes between the contents of the files before and after modification (i.e. the contents that have "bcd1234..." -and "0123456..." as their SHA1 content ID, in the above +and "0123456..." as their SHA-1 content ID, in the above example). The amount of deletion of original contents and insertion of new material are added together, and if it exceeds the "break score", the filepair is broken into two. The break diff --git a/Documentation/githooks.txt b/Documentation/githooks.txt index dc6693fe48..d48bf4d6fa 100644 --- a/Documentation/githooks.txt +++ b/Documentation/githooks.txt @@ -99,7 +99,7 @@ given); `template` (if a `-t` option was given or the configuration option `commit.template` is set); `merge` (if the commit is a merge or a `.git/MERGE_MSG` file exists); `squash` (if a `.git/SQUASH_MSG` file exists); or `commit`, followed by -a commit SHA1 (if a `-c`, `-C` or `--amend` option was given). +a commit SHA-1 (if a `-c`, `-C` or `--amend` option was given). If the exit status is non-zero, 'git commit' will abort. @@ -196,11 +196,11 @@ hook would receive a line like the following: refs/heads/master 67890 refs/heads/foreign 12345 -although the full, 40-character SHA1s would be supplied. If the foreign ref -does not yet exist the `<remote SHA1>` will be 40 `0`. If a ref is to be +although the full, 40-character SHA-1s would be supplied. If the foreign ref +does not yet exist the `<remote SHA-1>` will be 40 `0`. If a ref is to be deleted, the `<local ref>` will be supplied as `(delete)` and the `<local -SHA1>` will be 40 `0`. If the local commit was specified by something other -than a name which could be expanded (such as `HEAD~`, or a SHA1) it will be +SHA-1>` will be 40 `0`. If the local commit was specified by something other +than a name which could be expanded (such as `HEAD~`, or a SHA-1) it will be supplied as it was originally given. If this hook exits with a non-zero status, 'git push' will abort without diff --git a/Documentation/gitremote-helpers.txt b/Documentation/gitremote-helpers.txt index 0c91aba861..da746419b3 100644 --- a/Documentation/gitremote-helpers.txt +++ b/Documentation/gitremote-helpers.txt @@ -174,8 +174,8 @@ ref. This capability can be advertised multiple times. The first applicable refspec takes precedence. The left-hand of refspecs advertised with this capability must cover all refs reported by -the list command. If no 'refspec' capability is advertised, -there is an implied `refspec *:*`. +the list command. If a helper does not need a specific 'refspec' +capability then it should advertise `refspec *:*`. 'bidi-import':: This modifies the 'import' capability. @@ -202,6 +202,10 @@ there is an implied `refspec *:*`. marks specified in <file> before processing any input. For details, read up on '--import-marks=<file>' in linkgit:git-fast-export[1]. +'signed-tags':: + This modifies the 'export' capability, instructing Git to pass + '--signed-tags=verbatim' to linkgit:git-fast-export[1]. In the + absence of this capability, Git will use '--signed-tags=warn-strip'. diff --git a/Documentation/gitrepository-layout.txt b/Documentation/gitrepository-layout.txt index f0eef765b9..d6f3393c5f 100644 --- a/Documentation/gitrepository-layout.txt +++ b/Documentation/gitrepository-layout.txt @@ -106,7 +106,7 @@ refs/remotes/`name`:: from a remote repository. refs/replace/`<obj-sha1>`:: - records the SHA1 of the object that replaces `<obj-sha1>`. + records the SHA-1 of the object that replaces `<obj-sha1>`. This is similar to info/grafts and is internally used and maintained by linkgit:git-replace[1]. Such refs can be exchanged between repositories while grafts are not. @@ -184,6 +184,10 @@ info/exclude:: 'git clean' look at it but the core Git commands do not look at it. See also: linkgit:gitignore[5]. +info/sparse-checkout:: + This file stores sparse checkout patterns. + See also: linkgit:git-read-tree[1]. + remotes:: Stores shorthands for URL and default refnames for use when interacting with remote repositories via 'git fetch', diff --git a/Documentation/gittutorial-2.txt b/Documentation/gittutorial-2.txt index 94c906eda8..3109ea8aad 100644 --- a/Documentation/gittutorial-2.txt +++ b/Documentation/gittutorial-2.txt @@ -46,9 +46,9 @@ What are the 7 digits of hex that Git responded to the commit with? We saw in part one of the tutorial that commits have names like this. It turns out that every object in the Git history is stored under -a 40-digit hex name. That name is the SHA1 hash of the object's +a 40-digit hex name. That name is the SHA-1 hash of the object's contents; among other things, this ensures that Git will never store -the same data twice (since identical data is given an identical SHA1 +the same data twice (since identical data is given an identical SHA-1 name), and that the contents of a Git object will never change (since that would change the object's name as well). The 7 char hex strings here are simply the abbreviation of such 40 character long strings. @@ -56,7 +56,7 @@ Abbreviations can be used everywhere where the 40 character strings can be used, so long as they are unambiguous. It is expected that the content of the commit object you created while -following the example above generates a different SHA1 hash than +following the example above generates a different SHA-1 hash than the one shown above because the commit object records the time when it was created and the name of the person performing the commit. @@ -80,14 +80,14 @@ A tree can refer to one or more "blob" objects, each corresponding to a file. In addition, a tree can also refer to other tree objects, thus creating a directory hierarchy. You can examine the contents of any tree using ls-tree (remember that a long enough initial portion -of the SHA1 will also work): +of the SHA-1 will also work): ------------------------------------------------ $ git ls-tree 92b8b694 100644 blob 3b18e512dba79e4c8300dd08aeb37f8e728b8dad file.txt ------------------------------------------------ -Thus we see that this tree has one file in it. The SHA1 hash is a +Thus we see that this tree has one file in it. The SHA-1 hash is a reference to that file's data: ------------------------------------------------ @@ -106,7 +106,7 @@ Note that this is the old file data; so the object that Git named in its response to the initial tree was a tree with a snapshot of the directory state that was recorded by the first commit. -All of these objects are stored under their SHA1 names inside the Git +All of these objects are stored under their SHA-1 names inside the Git directory: ------------------------------------------------ @@ -142,7 +142,7 @@ ref: refs/heads/master As you can see, this tells us which branch we're currently on, and it tells us this by naming a file under the .git directory, which itself -contains a SHA1 name referring to a commit object, which we can +contains a SHA-1 name referring to a commit object, which we can examine with cat-file: ------------------------------------------------ @@ -208,7 +208,7 @@ project's history: Note, by the way, that lots of commands take a tree as an argument. But as we can see above, a tree can be referred to in many different -ways--by the SHA1 name for that tree, by the name of a commit that +ways--by the SHA-1 name for that tree, by the name of a commit that refers to the tree, by the name of a branch whose head refers to that tree, etc.--and most such commands can accept any of these names. diff --git a/Documentation/gitweb.conf.txt b/Documentation/gitweb.conf.txt index eb636317be..ea0526ecc4 100644 --- a/Documentation/gitweb.conf.txt +++ b/Documentation/gitweb.conf.txt @@ -857,6 +857,13 @@ adding the following lines to your gitweb configuration file: $known_snapshot_formats{'zip'}{'disabled'} = 1; $known_snapshot_formats{'tgz'}{'compressor'} = ['gzip','-6']; +BUGS +---- +Debugging would be easier if the fallback configuration file +(`/etc/gitweb.conf`) and environment variable to override its location +('GITWEB_CONFIG_SYSTEM') had names reflecting their "fallback" role. +The current names are kept to avoid breaking working setups. + ENVIRONMENT ----------- The location of per-instance and system-wide configuration files can be diff --git a/Documentation/glossary-content.txt b/Documentation/glossary-content.txt index 521fceebe6..68a18e1497 100644 --- a/Documentation/glossary-content.txt +++ b/Documentation/glossary-content.txt @@ -100,12 +100,22 @@ to point at the new commit. [[def_detached_HEAD]]detached HEAD:: Normally the <<def_HEAD,HEAD>> stores the name of a - <<def_branch,branch>>. However, Git also allows you to <<def_checkout,check out>> - an arbitrary <<def_commit,commit>> that isn't necessarily the tip of any - particular branch. In this case HEAD is said to be "detached". - -[[def_dircache]]dircache:: - You are *waaaaay* behind. See <<def_index,index>>. + <<def_branch,branch>>, and commands that operate on the + history HEAD represents operate on the history leading to the + tip of the branch the HEAD points at. However, Git also + allows you to <<def_checkout,check out>> an arbitrary + <<def_commit,commit>> that isn't necessarily the tip of any + particular branch. The HEAD in such a state is called + "detached". ++ +Note that commands that operate on the history of the current branch +(e.g. `git commit` to build a new history on top of it) still work +while the HEAD is detached. They update the HEAD to point at the tip +of the updated history without affecting any branch. Commands that +update or inquire information _about_ the current branch (e.g. `git +branch --set-upstream-to` that sets what remote tracking branch the +current branch integrates with) obviously do not work, as there is no +(real) current branch to ask about in this state. [[def_directory]]directory:: The list you get with "ls" :-) @@ -115,11 +125,6 @@ to point at the new commit. it contains modifications which have not been <<def_commit,committed>> to the current <<def_branch,branch>>. -[[def_ent]]ent:: - Favorite synonym to "<<def_tree-ish,tree-ish>>" by some total geeks. See - http://en.wikipedia.org/wiki/Ent_(Middle-earth) for an in-depth - explanation. Avoid this term, not to confuse people. - [[def_evil_merge]]evil merge:: An evil merge is a <<def_merge,merge>> that introduces changes that do not appear in any <<def_parent,parent>>. @@ -161,7 +166,7 @@ to point at the new commit. created. Configured via the `.git/info/grafts` file. [[def_hash]]hash:: - In Git's context, synonym to <<def_object_name,object name>>. + In Git's context, synonym for <<def_object_name,object name>>. [[def_head]]head:: A <<def_ref,named reference>> to the <<def_commit,commit>> at the tip of a @@ -233,7 +238,7 @@ This commit is referred to as a "merge commit", or sometimes just a [[def_object]]object:: The unit of storage in Git. It is uniquely identified by the - <<def_SHA1,SHA1>> of its contents. Consequently, an + <<def_SHA1,SHA-1>> of its contents. Consequently, an object can not be changed. [[def_object_database]]object database:: @@ -245,10 +250,9 @@ This commit is referred to as a "merge commit", or sometimes just a Synonym for <<def_object_name,object name>>. [[def_object_name]]object name:: - The unique identifier of an <<def_object,object>>. The <<def_hash,hash>> - of the object's contents using the Secure Hash Algorithm - 1 and usually represented by the 40 character hexadecimal encoding of - the <<def_hash,hash>> of the object. + The unique identifier of an <<def_object,object>>. The + object name is usually represented by a 40 character + hexadecimal string. Also colloquially called <<def_SHA1,SHA-1>>. [[def_object_type]]object type:: One of the identifiers "<<def_commit_object,commit>>", @@ -257,8 +261,7 @@ This commit is referred to as a "merge commit", or sometimes just a <<def_object,object>>. [[def_octopus]]octopus:: - To <<def_merge,merge>> more than two <<def_branch,branches>>. Also denotes an - intelligent predator. + To <<def_merge,merge>> more than two <<def_branch,branches>>. [[def_origin]]origin:: The default upstream <<def_repository,repository>>. Most projects have @@ -278,7 +281,7 @@ This commit is referred to as a "merge commit", or sometimes just a pack. [[def_pathspec]]pathspec:: - Pattern used to specify paths. + Pattern used to limit paths in Git commands. + Pathspecs are used on the command line of "git ls-files", "git ls-tree", "git add", "git grep", "git diff", "git checkout", @@ -287,6 +290,8 @@ limit the scope of operations to some subset of the tree or worktree. See the documentation of each command for whether paths are relative to the current directory or toplevel. The pathspec syntax is as follows: ++ +-- * any path matches itself * the pathspec up to the last slash represents a @@ -296,11 +301,12 @@ pathspec syntax is as follows: of the pathname. Paths relative to the directory prefix will be matched against that pattern using fnmatch(3); in particular, '*' and '?' _can_ match directory separators. + +-- + For example, Documentation/*.jpg will match all .jpg files in the Documentation subtree, including Documentation/chapter_1/figure_1.jpg. - + A pathspec that begins with a colon `:` has special meaning. In the short form, the leading colon `:` is followed by zero or more "magic @@ -316,18 +322,10 @@ and a close parentheses `)`, and the remainder is the pattern to match against the path. + The "magic signature" consists of an ASCII symbol that is not -alphanumeric. -+ --- -top `/`;; - The magic word `top` (mnemonic: `/`) makes the pattern match - from the root of the working tree, even when you are running - the command from inside a subdirectory. --- -+ -Currently only the slash `/` is recognized as the "magic signature", -but it is envisioned that we will support more types of magic in later -versions of Git. +alphanumeric. Currently only the slash `/` is recognized as a +"magic signature": it makes the pattern match from the root of +the working tree, even when you are running the command from +inside a subdirectory. + A pathspec with only a colon means "there is no pathspec". This form should not be combined with other pathspec. @@ -385,7 +383,7 @@ should not be combined with other pathspec. to the result. [[def_ref]]ref:: - A 40-byte hex representation of a <<def_SHA1,SHA1>> or a name that + A 40-byte hex representation of a <<def_SHA1,SHA-1>> or a name that denotes a particular <<def_object,object>>. They may be stored in a file under `$GIT_DIR/refs/` directory, or in the `$GIT_DIR/packed-refs` file. @@ -399,15 +397,7 @@ should not be combined with other pathspec. [[def_refspec]]refspec:: A "refspec" is used by <<def_fetch,fetch>> and <<def_push,push>> to describe the mapping between remote - <<def_ref,ref>> and local ref. They are combined with a colon in - the format <src>:<dst>, preceded by an optional plus sign, +. - For example: `git fetch $URL - refs/heads/master:refs/heads/origin` means "grab the master - <<def_branch,branch>> <<def_head,head>> from the $URL and store - it as my origin branch head". And `git push - $URL refs/heads/master:refs/heads/to-upstream` means "publish my - master branch head as to-upstream branch at $URL". See also - linkgit:git-push[1]. + <<def_ref,ref>> and local ref. [[def_remote_tracking_branch]]remote-tracking branch:: A regular Git <<def_branch,branch>> that is used to follow changes from @@ -439,8 +429,9 @@ should not be combined with other pathspec. [[def_SCM]]SCM:: Source code management (tool). -[[def_SHA1]]SHA1:: - Synonym for <<def_object_name,object name>>. +[[def_SHA1]]SHA-1:: + "Secure Hash Algorithm 1"; a cryptographic hash function. + In the context of Git used as a synonym for <<def_object_name,object name>>. [[def_shallow_repository]]shallow repository:: A shallow <<def_repository,repository>> has an incomplete @@ -454,7 +445,7 @@ should not be combined with other pathspec. its history can be later deepened with linkgit:git-fetch[1]. [[def_symref]]symref:: - Symbolic reference: instead of containing the <<def_SHA1,SHA1>> + Symbolic reference: instead of containing the <<def_SHA1,SHA-1>> id itself, it is of the format 'ref: refs/some/thing' and when referenced, it recursively dereferences to this reference. '<<def_HEAD,HEAD>>' is a prime example of a symref. Symbolic diff --git a/Documentation/howto/recover-corrupted-blob-object.txt b/Documentation/howto/recover-corrupted-blob-object.txt index 6d362ceb10..1b3b188d3c 100644 --- a/Documentation/howto/recover-corrupted-blob-object.txt +++ b/Documentation/howto/recover-corrupted-blob-object.txt @@ -15,7 +15,7 @@ On Fri, 9 Nov 2007, Yossi Leybovich wrote: > Any one know how can I track this object and understand which file is it ----------------------------------------------------------- -So exactly *because* the SHA1 hash is cryptographically secure, the hash +So exactly *because* the SHA-1 hash is cryptographically secure, the hash itself doesn't actually tell you anything, in order to fix a corrupt object you basically have to find the "original source" for it. @@ -44,7 +44,7 @@ So: ----------------------------------------------------------- This is the right thing to do, although it's usually best to save it under -it's full SHA1 name (you just dropped the "4b" from the result ;). +it's full SHA-1 name (you just dropped the "4b" from the result ;). Let's see what that tells us: @@ -89,7 +89,7 @@ working tree, in which case fixing this problem is really simple, just do git hash-object -w my-magic-file -again, and if it outputs the missing SHA1 (4b945..) you're now all done! +again, and if it outputs the missing SHA-1 (4b945..) you're now all done! But that's the really lucky case, so let's assume that it was some older version that was broken. How do you tell which version it was? diff --git a/Documentation/merge-options.txt b/Documentation/merge-options.txt index 34a8445828..2adccf8fec 100644 --- a/Documentation/merge-options.txt +++ b/Documentation/merge-options.txt @@ -84,6 +84,11 @@ option can be used to override --squash. Pass merge strategy specific option through to the merge strategy. +--verify-signatures:: +--no-verify-signatures:: + Verify that the commits being merged have good and trusted GPG signatures + and abort the merge in case they do not. + --summary:: --no-summary:: Synonyms to --stat and --no-stat; these are deprecated and will be diff --git a/Documentation/merge-strategies.txt b/Documentation/merge-strategies.txt index 66db80296f..49a9a7d53f 100644 --- a/Documentation/merge-strategies.txt +++ b/Documentation/merge-strategies.txt @@ -48,6 +48,12 @@ patience;; this when the branches to be merged have diverged wildly. See also linkgit:git-diff[1] `--patience`. +diff-algorithm=[patience|minimal|histogram|myers];; + Tells 'merge-recursive' to use a different diff algorithm, which + can help avoid mismerges that occur due to unimportant matching + lines (such as braces from distinct functions). See also + linkgit:git-diff[1] `--diff-algorithm`. + ignore-space-change;; ignore-all-space;; ignore-space-at-eol;; diff --git a/Documentation/pretty-formats.txt b/Documentation/pretty-formats.txt index 293965524e..1d174fd0b6 100644 --- a/Documentation/pretty-formats.txt +++ b/Documentation/pretty-formats.txt @@ -75,7 +75,7 @@ This is designed to be as compact as possible. * 'raw' + The 'raw' format shows the entire commit exactly as -stored in the commit object. Notably, the SHA1s are +stored in the commit object. Notably, the SHA-1s are displayed in full, regardless of whether --abbrev or --no-abbrev are used, and 'parents' information show the true parent commits, without taking grafts nor history @@ -106,18 +106,22 @@ The placeholders are: - '%P': parent hashes - '%p': abbreviated parent hashes - '%an': author name -- '%aN': author name (respecting .mailmap, see linkgit:git-shortlog[1] or linkgit:git-blame[1]) +- '%aN': author name (respecting .mailmap, see linkgit:git-shortlog[1] + or linkgit:git-blame[1]) - '%ae': author email -- '%aE': author email (respecting .mailmap, see linkgit:git-shortlog[1] or linkgit:git-blame[1]) +- '%aE': author email (respecting .mailmap, see + linkgit:git-shortlog[1] or linkgit:git-blame[1]) - '%ad': author date (format respects --date= option) - '%aD': author date, RFC2822 style - '%ar': author date, relative - '%at': author date, UNIX timestamp - '%ai': author date, ISO 8601 format - '%cn': committer name -- '%cN': committer name (respecting .mailmap, see linkgit:git-shortlog[1] or linkgit:git-blame[1]) +- '%cN': committer name (respecting .mailmap, see + linkgit:git-shortlog[1] or linkgit:git-blame[1]) - '%ce': committer email -- '%cE': committer email (respecting .mailmap, see linkgit:git-shortlog[1] or linkgit:git-blame[1]) +- '%cE': committer email (respecting .mailmap, see + linkgit:git-shortlog[1] or linkgit:git-blame[1]) - '%cd': committer date - '%cD': committer date, RFC2822 style - '%cr': committer date, relative @@ -131,15 +135,18 @@ The placeholders are: - '%B': raw body (unwrapped subject and body) - '%N': commit notes - '%GG': raw verification message from GPG for a signed commit -- '%G?': show either "G" for Good or "B" for Bad for a signed commit +- '%G?': show "G" for a Good signature, "B" for a Bad signature, "U" for a good, + untrusted signature and "N" for no signature - '%GS': show the name of the signer for a signed commit - '%GK': show the key used to sign a signed commit - '%gD': reflog selector, e.g., `refs/stash@{1}` - '%gd': shortened reflog selector, e.g., `stash@{1}` - '%gn': reflog identity name -- '%gN': reflog identity name (respecting .mailmap, see linkgit:git-shortlog[1] or linkgit:git-blame[1]) +- '%gN': reflog identity name (respecting .mailmap, see + linkgit:git-shortlog[1] or linkgit:git-blame[1]) - '%ge': reflog identity email -- '%gE': reflog identity email (respecting .mailmap, see linkgit:git-shortlog[1] or linkgit:git-blame[1]) +- '%gE': reflog identity email (respecting .mailmap, see + linkgit:git-shortlog[1] or linkgit:git-blame[1]) - '%gs': reflog subject - '%Cred': switch color to red - '%Cgreen': switch color to green @@ -149,13 +156,28 @@ The placeholders are: adding `auto,` at the beginning will emit color only when colors are enabled for log output (by `color.diff`, `color.ui`, or `--color`, and respecting the `auto` settings of the former if we are going to a - terminal) + terminal). `auto` alone (i.e. `%C(auto)`) will turn on auto coloring + on the next placeholders until the color is switched again. - '%m': left, right or boundary mark - '%n': newline - '%%': a raw '%' - '%x00': print a byte from a hex code - '%w([<w>[,<i1>[,<i2>]]])': switch line wrapping, like the -w option of linkgit:git-shortlog[1]. +- '%<(<N>[,trunc|ltrunc|mtrunc])': make the next placeholder take at + least N columns, padding spaces on the right if necessary. + Optionally truncate at the beginning (ltrunc), the middle (mtrunc) + or the end (trunc) if the output is longer than N columns. + Note that truncating only works correctly with N >= 2. +- '%<|(<N>)': make the next placeholder take at least until Nth + columns, padding spaces on the right if necessary +- '%>(<N>)', '%>|(<N>)': similar to '%<(<N>)', '%<|(<N>)' + respectively, but padding spaces on the left +- '%>>(<N>)', '%>>|(<N>)': similar to '%>(<N>)', '%>|(<N>)' + respectively, except that if the next placeholder takes more spaces + than given and there are spaces on its left, use those spaces +- '%><(<N>)', '%><|(<N>)': similar to '% <(<N>)', '%<|(<N>)' + respectively, but padding both sides (i.e. the text is centered) NOTE: Some placeholders may depend on other options given to the revision traversal engine. For example, the `%g*` reflog options will diff --git a/Documentation/revisions.txt b/Documentation/revisions.txt index b0f72206a0..a8ff691492 100644 --- a/Documentation/revisions.txt +++ b/Documentation/revisions.txt @@ -2,13 +2,13 @@ SPECIFYING REVISIONS -------------------- A revision parameter '<rev>' typically, but not necessarily, names a -commit object. It uses what is called an 'extended SHA1' +commit object. It uses what is called an 'extended SHA-1' syntax. Here are various ways to spell object names. The ones listed near the end of this list name trees and blobs contained in a commit. '<sha1>', e.g. 'dae86e1950b1277e545cee180551750029cfe735', 'dae86e':: - The full SHA1 object name (40-byte hexadecimal string), or + The full SHA-1 object name (40-byte hexadecimal string), or a leading substring that is unique within the repository. E.g. dae86e1950b1277e545cee180551750029cfe735 and dae86e both name the same commit object if there is no other object in @@ -116,6 +116,11 @@ some output processing may assume ref names in UTF-8. object of that type is found or the object cannot be dereferenced anymore (in which case, barf). '<rev>{caret}0' is a short-hand for '<rev>{caret}\{commit\}'. ++ +'rev{caret}\{object\}' can be used to make sure 'rev' names an +object that exists, without requiring 'rev' to be a tag, and +without dereferencing 'rev'; because a tag is already an object, +it does not have to be dereferenced even once to get to an object. '<rev>{caret}\{\}', e.g. 'v0.99.8{caret}\{\}':: A suffix '{caret}' followed by an empty brace pair diff --git a/Documentation/technical/api-directory-listing.txt b/Documentation/technical/api-directory-listing.txt index 1f349b28ae..7f8e78d916 100644 --- a/Documentation/technical/api-directory-listing.txt +++ b/Documentation/technical/api-directory-listing.txt @@ -22,12 +22,23 @@ The notable options are: `flags`:: - A bit-field of options: + A bit-field of options (the `*IGNORED*` flags are mutually exclusive): `DIR_SHOW_IGNORED`::: - The traversal is for finding just ignored files, not unignored - files. + Return just ignored files in `entries[]`, not untracked files. + +`DIR_SHOW_IGNORED_TOO`::: + + Similar to `DIR_SHOW_IGNORED`, but return ignored files in `ignored[]` + in addition to untracked files in `entries[]`. + +`DIR_COLLECT_IGNORED`::: + + Special mode for git-add. Return ignored files in `ignored[]` and + untracked files in `entries[]`. Only returns ignored files that match + pathspec exactly (no wildcards). Does not recurse into ignored + directories. `DIR_SHOW_OTHER_DIRECTORIES`::: @@ -57,6 +68,14 @@ The result of the enumeration is left in these fields: Internal use; keeps track of allocation of `entries[]` array. +`ignored[]`:: + + An array of `struct dir_entry`, used for ignored paths with the + `DIR_SHOW_IGNORED_TOO` and `DIR_COLLECT_IGNORED` flags. + +`ignored_nr`:: + + The number of members in `ignored[]` array. Calling sequence ---------------- diff --git a/Documentation/technical/api-sha1-array.txt b/Documentation/technical/api-sha1-array.txt index 45d1c517cd..3e75497a37 100644 --- a/Documentation/technical/api-sha1-array.txt +++ b/Documentation/technical/api-sha1-array.txt @@ -1,7 +1,7 @@ sha1-array API ============== -The sha1-array API provides storage and manipulation of sets of SHA1 +The sha1-array API provides storage and manipulation of sets of SHA-1 identifiers. The emphasis is on storage and processing efficiency, making them suitable for large lists. Note that the ordering of items is not preserved over some operations. @@ -11,7 +11,7 @@ Data Structures `struct sha1_array`:: - A single array of SHA1 hashes. This should be initialized by + A single array of SHA-1 hashes. This should be initialized by assignment from `SHA1_ARRAY_INIT`. The `sha1` member contains the actual data. The `nr` member contains the number of items in the set. The `alloc` and `sorted` members are used internally, diff --git a/Documentation/technical/api-strbuf.txt b/Documentation/technical/api-strbuf.txt index 2c59cb2259..3350d97dda 100644 --- a/Documentation/technical/api-strbuf.txt +++ b/Documentation/technical/api-strbuf.txt @@ -230,6 +230,11 @@ which can be used by the programmer of the callback as she sees fit. destination. This is useful for literal data to be fed to either strbuf_expand or to the *printf family of functions. +`strbuf_humanise_bytes`:: + + Append the given byte size as a human-readable string (i.e. 12.23 KiB, + 3.50 MiB). + `strbuf_addf`:: Add a formatted string to the buffer. diff --git a/Documentation/technical/pack-format.txt b/Documentation/technical/pack-format.txt index a37f1378d0..8e5bf60be3 100644 --- a/Documentation/technical/pack-format.txt +++ b/Documentation/technical/pack-format.txt @@ -34,7 +34,7 @@ Git pack format Observation: length of each object is encoded in a variable length format and is not constrained to 32-bit or anything. - - The trailer records 20-byte SHA1 checksum of all of the above. + - The trailer records 20-byte SHA-1 checksum of all of the above. == Original (version 1) pack-*.idx files have the following format: @@ -55,10 +55,10 @@ Git pack format - The file is concluded with a trailer: - A copy of the 20-byte SHA1 checksum at the end of + A copy of the 20-byte SHA-1 checksum at the end of corresponding packfile. - 20-byte SHA1-checksum of all of the above. + 20-byte SHA-1-checksum of all of the above. Pack Idx file: @@ -106,7 +106,7 @@ Pack file entry: <+ If it is not DELTA, then deflated bytes (the size above is the size before compression). If it is REF_DELTA, then - 20-byte base object name SHA1 (the size above is the + 20-byte base object name SHA-1 (the size above is the size of the delta data that follows). delta data, deflated. If it is OFS_DELTA, then @@ -135,7 +135,7 @@ Pack file entry: <+ - A 256-entry fan-out table just like v1. - - A table of sorted 20-byte SHA1 object names. These are + - A table of sorted 20-byte SHA-1 object names. These are packed together without offset values to reduce the cache footprint of the binary search for a specific object name. @@ -156,7 +156,7 @@ Pack file entry: <+ - The same trailer as a v1 pack file: - A copy of the 20-byte SHA1 checksum at the end of + A copy of the 20-byte SHA-1 checksum at the end of corresponding packfile. - 20-byte SHA1-checksum of all of the above. + 20-byte SHA-1-checksum of all of the above. diff --git a/Documentation/technical/pack-heuristics.txt b/Documentation/technical/pack-heuristics.txt index dbdf7ba9c8..8b7ae1c140 100644 --- a/Documentation/technical/pack-heuristics.txt +++ b/Documentation/technical/pack-heuristics.txt @@ -89,7 +89,7 @@ Ah, grasshopper! And thus the enlightenment begins anew. <linus> The "magic" is actually in theory totally arbitrary. ANY order will give you a working pack, but no, it's not - ordered by SHA1. + ordered by SHA-1. Before talking about the ordering for the sliding delta window, let's talk about the recency order. That's more diff --git a/Documentation/technical/shallow.txt b/Documentation/technical/shallow.txt index ea2f69faf5..5183b15422 100644 --- a/Documentation/technical/shallow.txt +++ b/Documentation/technical/shallow.txt @@ -8,7 +8,7 @@ repo, and therefore grafts are introduced pretending that these commits have no parents. ********************************************************* -The basic idea is to write the SHA1s of shallow commits into +The basic idea is to write the SHA-1s of shallow commits into $GIT_DIR/shallow, and handle its contents like the contents of $GIT_DIR/info/grafts (with the difference that shallow cannot contain parent information). @@ -18,7 +18,7 @@ even the config, since the user should not touch that file at all (even throughout development of the shallow clone, it was never manually edited!). -Each line contains exactly one SHA1. When read, a commit_graft +Each line contains exactly one SHA-1. When read, a commit_graft will be constructed, which has nr_parent < 0 to make it easier to discern from user provided grafts. |