diff options
Diffstat (limited to 'Documentation/technical')
| -rw-r--r-- | Documentation/technical/api-argv-array.txt | 7 | ||||
| -rw-r--r-- | Documentation/technical/api-config.txt | 7 | ||||
| -rw-r--r-- | Documentation/technical/api-credentials.txt | 4 | ||||
| -rw-r--r-- | Documentation/technical/api-parse-options.txt | 15 | ||||
| -rw-r--r-- | Documentation/technical/api-remote.txt | 4 | ||||
| -rw-r--r-- | Documentation/technical/api-trace.txt | 45 | ||||
| -rw-r--r-- | Documentation/technical/pack-protocol.txt | 2 | ||||
| -rw-r--r-- | Documentation/technical/signature-format.txt | 186 |
8 files changed, 257 insertions, 13 deletions
diff --git a/Documentation/technical/api-argv-array.txt b/Documentation/technical/api-argv-array.txt index 8076172a08..cfc063018c 100644 --- a/Documentation/technical/api-argv-array.txt +++ b/Documentation/technical/api-argv-array.txt @@ -56,3 +56,10 @@ Functions `argv_array_clear`:: Free all memory associated with the array and return it to the initial, empty state. + +`argv_array_detach`:: + Disconnect the `argv` member from the `argv_array` struct and + return it. The caller is responsible for freeing the memory used + by the array, and by the strings it references. After detaching, + the `argv_array` is in a reinitialized state and can be pushed + into again. diff --git a/Documentation/technical/api-config.txt b/Documentation/technical/api-config.txt index 0d8b99b368..20741f345e 100644 --- a/Documentation/technical/api-config.txt +++ b/Documentation/technical/api-config.txt @@ -63,13 +63,6 @@ parse for configuration, rather than looking in the usual files. Regular Specify whether include directives should be followed in parsed files. Regular `git_config` defaults to `1`. -There is a special version of `git_config` called `git_config_early`. -This version takes an additional parameter to specify the repository -config, instead of having it looked up via `git_path`. This is useful -early in a Git program before the repository has been found. Unless -you're working with early setup code, you probably don't want to use -this. - Reading Specific Files ---------------------- diff --git a/Documentation/technical/api-credentials.txt b/Documentation/technical/api-credentials.txt index e44426dd04..75368f26ca 100644 --- a/Documentation/technical/api-credentials.txt +++ b/Documentation/technical/api-credentials.txt @@ -243,7 +243,7 @@ appended to its command line, which is one of: The details of the credential will be provided on the helper's stdin stream. The exact format is the same as the input/output format of the `git credential` plumbing command (see the section `INPUT/OUTPUT -FORMAT` in linkgit:git-credential[7] for a detailed specification). +FORMAT` in linkgit:git-credential[1] for a detailed specification). For a `get` operation, the helper should produce a list of attributes on stdout in the same format. A helper is free to produce a subset, or @@ -268,4 +268,4 @@ See also linkgit:gitcredentials[7] -linkgit:git-config[5] (See configuration variables `credential.*`) +linkgit:git-config[1] (See configuration variables `credential.*`) diff --git a/Documentation/technical/api-parse-options.txt b/Documentation/technical/api-parse-options.txt index 5f0757dcc9..27bd701c0d 100644 --- a/Documentation/technical/api-parse-options.txt +++ b/Documentation/technical/api-parse-options.txt @@ -144,8 +144,12 @@ There are some macros to easily define options: `OPT_COUNTUP(short, long, &int_var, description)`:: Introduce a count-up option. - `int_var` is incremented on each use of `--option`, and - reset to zero with `--no-option`. + Each use of `--option` increments `int_var`, starting from zero + (even if initially negative), and `--no-option` resets it to + zero. To determine if `--option` or `--no-option` was encountered at + all, initialize `int_var` to a negative value, and if it is still + negative after parse_options(), then neither `--option` nor + `--no-option` was seen. `OPT_BIT(short, long, &int_var, description, mask)`:: Introduce a boolean option. @@ -231,6 +235,13 @@ There are some macros to easily define options: pass the command-line option, which can be specified multiple times, to another command. +`OPT_CMDMODE(short, long, &int_var, description, enum_val)`:: + Define an "operation mode" option, only one of which in the same + group of "operating mode" options that share the same `int_var` + can be given by the user. `enum_val` is set to `int_var` when the + option is used, but an error is reported if other "operating mode" + option has already set its value to the same `int_var`. + The last element of the array must be `OPT_END()`. diff --git a/Documentation/technical/api-remote.txt b/Documentation/technical/api-remote.txt index 2cfdd224a8..f10941b2e8 100644 --- a/Documentation/technical/api-remote.txt +++ b/Documentation/technical/api-remote.txt @@ -51,6 +51,10 @@ struct remote The proxy to use for curl (http, https, ftp, etc.) URLs. +`http_proxy_authmethod`:: + + The method used for authenticating against `http_proxy`. + struct remotes can be found by name with remote_get(), and iterated through with for_each_remote(). remote_get(NULL) will return the default remote, given the current branch and configuration. diff --git a/Documentation/technical/api-trace.txt b/Documentation/technical/api-trace.txt index 097a651d96..fadb5979c4 100644 --- a/Documentation/technical/api-trace.txt +++ b/Documentation/technical/api-trace.txt @@ -28,7 +28,7 @@ static struct trace_key trace_foo = TRACE_KEY_INIT(FOO); static void trace_print_foo(const char *message) { - trace_print_key(&trace_foo, message); + trace_printf_key(&trace_foo, "%s", message); } ------------ + @@ -95,3 +95,46 @@ for (;;) { } trace_performance(t, "frotz"); ------------ + +Bugs & Caveats +-------------- + +GIT_TRACE_* environment variables can be used to tell Git to show +trace output to its standard error stream. Git can often spawn a pager +internally to run its subcommand and send its standard output and +standard error to it. + +Because GIT_TRACE_PERFORMANCE trace is generated only at the very end +of the program with atexit(), which happens after the pager exits, it +would not work well if you send its log to the standard error output +and let Git spawn the pager at the same time. + +As a work around, you can for example use '--no-pager', or set +GIT_TRACE_PERFORMANCE to another file descriptor which is redirected +to stderr, or set GIT_TRACE_PERFORMANCE to a file specified by its +absolute path. + +For example instead of the following command which by default may not +print any performance information: + +------------ +GIT_TRACE_PERFORMANCE=2 git log -1 +------------ + +you may want to use: + +------------ +GIT_TRACE_PERFORMANCE=2 git --no-pager log -1 +------------ + +or: + +------------ +GIT_TRACE_PERFORMANCE=3 3>&2 git log -1 +------------ + +or: + +------------ +GIT_TRACE_PERFORMANCE=/path/to/log/file git log -1 +------------ diff --git a/Documentation/technical/pack-protocol.txt b/Documentation/technical/pack-protocol.txt index c6977bbc5a..8b36343802 100644 --- a/Documentation/technical/pack-protocol.txt +++ b/Documentation/technical/pack-protocol.txt @@ -526,7 +526,7 @@ Push Certificate A push certificate begins with a set of header lines. After the header and an empty line, the protocol commands follow, one per -line. Note that the the trailing LF in push-cert PKT-LINEs is _not_ +line. Note that the trailing LF in push-cert PKT-LINEs is _not_ optional; it must be present. Currently, the following header fields are defined: diff --git a/Documentation/technical/signature-format.txt b/Documentation/technical/signature-format.txt new file mode 100644 index 0000000000..2c9406a56a --- /dev/null +++ b/Documentation/technical/signature-format.txt @@ -0,0 +1,186 @@ +Git signature format +==================== + +== Overview + +Git uses cryptographic signatures in various places, currently objects (tags, +commits, mergetags) and transactions (pushes). In every case, the command which +is about to create an object or transaction determines a payload from that, +calls gpg to obtain a detached signature for the payload (`gpg -bsa`) and +embeds the signature into the object or transaction. + +Signatures always begin with `-----BEGIN PGP SIGNATURE-----` +and end with `-----END PGP SIGNATURE-----`, unless gpg is told to +produce RFC1991 signatures which use `MESSAGE` instead of `SIGNATURE`. + +The signed payload and the way the signature is embedded depends +on the type of the object resp. transaction. + +== Tag signatures + +- created by: `git tag -s` +- payload: annotated tag object +- embedding: append the signature to the unsigned tag object +- example: tag `signedtag` with subject `signed tag` + +---- +object 04b871796dc0420f8e7561a895b52484b701d51a +type commit +tag signedtag +tagger C O Mitter <committer@example.com> 1465981006 +0000 + +signed tag + +signed tag message body +-----BEGIN PGP SIGNATURE----- +Version: GnuPG v1 + +iQEcBAABAgAGBQJXYRhOAAoJEGEJLoW3InGJklkIAIcnhL7RwEb/+QeX9enkXhxn +rxfdqrvWd1K80sl2TOt8Bg/NYwrUBw/RWJ+sg/hhHp4WtvE1HDGHlkEz3y11Lkuh +8tSxS3qKTxXUGozyPGuE90sJfExhZlW4knIQ1wt/yWqM+33E9pN4hzPqLwyrdods +q8FWEqPPUbSJXoMbRPw04S5jrLtZSsUWbRYjmJCHzlhSfFWW4eFd37uquIaLUBS0 +rkC3Jrx7420jkIpgFcTI2s60uhSQLzgcCwdA2ukSYIRnjg/zDkj8+3h/GaROJ72x +lZyI6HWixKJkWw8lE9aAOD9TmTW9sFJwcVAzmAuFX2kUreDUKMZduGcoRYGpD7E= +=jpXa +-----END PGP SIGNATURE----- +---- + +- verify with: `git verify-tag [-v]` or `git tag -v` + +---- +gpg: Signature made Wed Jun 15 10:56:46 2016 CEST using RSA key ID B7227189 +gpg: Good signature from "Eris Discordia <discord@example.net>" +gpg: WARNING: This key is not certified with a trusted signature! +gpg: There is no indication that the signature belongs to the owner. +Primary key fingerprint: D4BE 2231 1AD3 131E 5EDA 29A4 6109 2E85 B722 7189 +object 04b871796dc0420f8e7561a895b52484b701d51a +type commit +tag signedtag +tagger C O Mitter <committer@example.com> 1465981006 +0000 + +signed tag + +signed tag message body +---- + +== Commit signatures + +- created by: `git commit -S` +- payload: commit object +- embedding: header entry `gpgsig` + (content is preceded by a space) +- example: commit with subject `signed commit` + +---- +tree eebfed94e75e7760540d1485c740902590a00332 +parent 04b871796dc0420f8e7561a895b52484b701d51a +author A U Thor <author@example.com> 1465981137 +0000 +committer C O Mitter <committer@example.com> 1465981137 +0000 +gpgsig -----BEGIN PGP SIGNATURE----- + Version: GnuPG v1 + + iQEcBAABAgAGBQJXYRjRAAoJEGEJLoW3InGJ3IwIAIY4SA6GxY3BjL60YyvsJPh/ + HRCJwH+w7wt3Yc/9/bW2F+gF72kdHOOs2jfv+OZhq0q4OAN6fvVSczISY/82LpS7 + DVdMQj2/YcHDT4xrDNBnXnviDO9G7am/9OE77kEbXrp7QPxvhjkicHNwy2rEflAA + zn075rtEERDHr8nRYiDh8eVrefSO7D+bdQ7gv+7GsYMsd2auJWi1dHOSfTr9HIF4 + HJhWXT9d2f8W+diRYXGh4X0wYiGg6na/soXc+vdtDYBzIxanRqjg8jCAeo1eOTk1 + EdTwhcTZlI0x5pvJ3H0+4hA2jtldVtmPM4OTB0cTrEWBad7XV6YgiyuII73Ve3I= + =jKHM + -----END PGP SIGNATURE----- + +signed commit + +signed commit message body +---- + +- verify with: `git verify-commit [-v]` (or `git show --show-signature`) + +---- +gpg: Signature made Wed Jun 15 10:58:57 2016 CEST using RSA key ID B7227189 +gpg: Good signature from "Eris Discordia <discord@example.net>" +gpg: WARNING: This key is not certified with a trusted signature! +gpg: There is no indication that the signature belongs to the owner. +Primary key fingerprint: D4BE 2231 1AD3 131E 5EDA 29A4 6109 2E85 B722 7189 +tree eebfed94e75e7760540d1485c740902590a00332 +parent 04b871796dc0420f8e7561a895b52484b701d51a +author A U Thor <author@example.com> 1465981137 +0000 +committer C O Mitter <committer@example.com> 1465981137 +0000 + +signed commit + +signed commit message body +---- + +== Mergetag signatures + +- created by: `git merge` on signed tag +- payload/embedding: the whole signed tag object is embedded into + the (merge) commit object as header entry `mergetag` +- example: merge of the signed tag `signedtag` as above + +---- +tree c7b1cff039a93f3600a1d18b82d26688668c7dea +parent c33429be94b5f2d3ee9b0adad223f877f174b05d +parent 04b871796dc0420f8e7561a895b52484b701d51a +author A U Thor <author@example.com> 1465982009 +0000 +committer C O Mitter <committer@example.com> 1465982009 +0000 +mergetag object 04b871796dc0420f8e7561a895b52484b701d51a + type commit + tag signedtag + tagger C O Mitter <committer@example.com> 1465981006 +0000 + + signed tag + + signed tag message body + -----BEGIN PGP SIGNATURE----- + Version: GnuPG v1 + + iQEcBAABAgAGBQJXYRhOAAoJEGEJLoW3InGJklkIAIcnhL7RwEb/+QeX9enkXhxn + rxfdqrvWd1K80sl2TOt8Bg/NYwrUBw/RWJ+sg/hhHp4WtvE1HDGHlkEz3y11Lkuh + 8tSxS3qKTxXUGozyPGuE90sJfExhZlW4knIQ1wt/yWqM+33E9pN4hzPqLwyrdods + q8FWEqPPUbSJXoMbRPw04S5jrLtZSsUWbRYjmJCHzlhSfFWW4eFd37uquIaLUBS0 + rkC3Jrx7420jkIpgFcTI2s60uhSQLzgcCwdA2ukSYIRnjg/zDkj8+3h/GaROJ72x + lZyI6HWixKJkWw8lE9aAOD9TmTW9sFJwcVAzmAuFX2kUreDUKMZduGcoRYGpD7E= + =jpXa + -----END PGP SIGNATURE----- + +Merge tag 'signedtag' into downstream + +signed tag + +signed tag message body + +# gpg: Signature made Wed Jun 15 08:56:46 2016 UTC using RSA key ID B7227189 +# gpg: Good signature from "Eris Discordia <discord@example.net>" +# gpg: WARNING: This key is not certified with a trusted signature! +# gpg: There is no indication that the signature belongs to the owner. +# Primary key fingerprint: D4BE 2231 1AD3 131E 5EDA 29A4 6109 2E85 B722 7189 +---- + +- verify with: verification is embedded in merge commit message by default, + alternatively with `git show --show-signature`: + +---- +commit 9863f0c76ff78712b6800e199a46aa56afbcbd49 +merged tag 'signedtag' +gpg: Signature made Wed Jun 15 10:56:46 2016 CEST using RSA key ID B7227189 +gpg: Good signature from "Eris Discordia <discord@example.net>" +gpg: WARNING: This key is not certified with a trusted signature! +gpg: There is no indication that the signature belongs to the owner. +Primary key fingerprint: D4BE 2231 1AD3 131E 5EDA 29A4 6109 2E85 B722 7189 +Merge: c33429b 04b8717 +Author: A U Thor <author@example.com> +Date: Wed Jun 15 09:13:29 2016 +0000 + + Merge tag 'signedtag' into downstream + + signed tag + + signed tag message body + + # gpg: Signature made Wed Jun 15 08:56:46 2016 UTC using RSA key ID B7227189 + # gpg: Good signature from "Eris Discordia <discord@example.net>" + # gpg: WARNING: This key is not certified with a trusted signature! + # gpg: There is no indication that the signature belongs to the owner. + # Primary key fingerprint: D4BE 2231 1AD3 131E 5EDA 29A4 6109 2E85 B722 7189 +---- |