diff options
Diffstat (limited to 'Documentation/technical')
| -rw-r--r-- | Documentation/technical/api-config.txt | 18 | ||||
| -rw-r--r-- | Documentation/technical/api-directory-listing.txt | 2 | ||||
| -rw-r--r-- | Documentation/technical/api-object-access.txt | 2 | ||||
| -rw-r--r-- | Documentation/technical/api-submodule-config.txt | 2 | ||||
| -rw-r--r-- | Documentation/technical/commit-graph-format.txt | 97 | ||||
| -rw-r--r-- | Documentation/technical/commit-graph.txt | 163 | ||||
| -rw-r--r-- | Documentation/technical/pack-format.txt | 92 | ||||
| -rw-r--r-- | Documentation/technical/protocol-v2.txt | 405 | ||||
| -rw-r--r-- | Documentation/technical/shallow.txt | 20 |
9 files changed, 781 insertions, 20 deletions
diff --git a/Documentation/technical/api-config.txt b/Documentation/technical/api-config.txt index 9a778b0cad..fa39ac9d71 100644 --- a/Documentation/technical/api-config.txt +++ b/Documentation/technical/api-config.txt @@ -47,21 +47,23 @@ will first feed the user-wide one to the callback, and then the repo-specific one; by overwriting, the higher-priority repo-specific value is left at the end). -The `git_config_with_options` function lets the caller examine config +The `config_with_options` function lets the caller examine config while adjusting some of the default behavior of `git_config`. It should almost never be used by "regular" Git code that is looking up configuration variables. It is intended for advanced callers like `git-config`, which are intentionally tweaking the normal config-lookup process. It takes two extra parameters: -`filename`:: -If this parameter is non-NULL, it specifies the name of a file to -parse for configuration, rather than looking in the usual files. Regular -`git_config` defaults to `NULL`. +`config_source`:: +If this parameter is non-NULL, it specifies the source to parse for +configuration, rather than looking in the usual files. See `struct +git_config_source` in `config.h` for details. Regular `git_config` defaults +to `NULL`. -`respect_includes`:: -Specify whether include directives should be followed in parsed files. -Regular `git_config` defaults to `1`. +`opts`:: +Specify options to adjust the behavior of parsing config files. See `struct +config_options` in `config.h` for details. As an example: regular `git_config` +sets `opts.respect_includes` to `1` by default. Reading Specific Files ---------------------- diff --git a/Documentation/technical/api-directory-listing.txt b/Documentation/technical/api-directory-listing.txt index 7fae00f44f..4f44ca24f6 100644 --- a/Documentation/technical/api-directory-listing.txt +++ b/Documentation/technical/api-directory-listing.txt @@ -53,7 +53,7 @@ The notable options are: not be returned even if all of its contents are ignored. In this case, the contents are returned as individual entries. + -If this is set, files and directories that explicity match an ignore +If this is set, files and directories that explicitly match an ignore pattern are reported. Implicity ignored directories (directories that do not match an ignore pattern, but whose contents are all ignored) are not reported, instead all of the contents are reported. diff --git a/Documentation/technical/api-object-access.txt b/Documentation/technical/api-object-access.txt index a1162e5bcd..5b29622d00 100644 --- a/Documentation/technical/api-object-access.txt +++ b/Documentation/technical/api-object-access.txt @@ -1,7 +1,7 @@ object access API ================= -Talk about <sha1_file.c> and <object.h> family, things like +Talk about <sha1-file.c> and <object.h> family, things like * read_sha1_file() * read_object_with_reference() diff --git a/Documentation/technical/api-submodule-config.txt b/Documentation/technical/api-submodule-config.txt index ee907c4a82..fb06089393 100644 --- a/Documentation/technical/api-submodule-config.txt +++ b/Documentation/technical/api-submodule-config.txt @@ -38,7 +38,7 @@ Data Structures Functions --------- -`void submodule_free()`:: +`void submodule_free(struct repository *r)`:: Use these to free the internally cached values. diff --git a/Documentation/technical/commit-graph-format.txt b/Documentation/technical/commit-graph-format.txt new file mode 100644 index 0000000000..ad6af8105c --- /dev/null +++ b/Documentation/technical/commit-graph-format.txt @@ -0,0 +1,97 @@ +Git commit graph format +======================= + +The Git commit graph stores a list of commit OIDs and some associated +metadata, including: + +- The generation number of the commit. Commits with no parents have + generation number 1; commits with parents have generation number + one more than the maximum generation number of its parents. We + reserve zero as special, and can be used to mark a generation + number invalid or as "not computed". + +- The root tree OID. + +- The commit date. + +- The parents of the commit, stored using positional references within + the graph file. + +These positional references are stored as unsigned 32-bit integers +corresponding to the array position withing the list of commit OIDs. We +use the most-significant bit for special purposes, so we can store at most +(1 << 31) - 1 (around 2 billion) commits. + +== Commit graph files have the following format: + +In order to allow extensions that add extra data to the graph, we organize +the body into "chunks" and provide a binary lookup table at the beginning +of the body. The header includes certain values, such as number of chunks +and hash type. + +All 4-byte numbers are in network order. + +HEADER: + + 4-byte signature: + The signature is: {'C', 'G', 'P', 'H'} + + 1-byte version number: + Currently, the only valid version is 1. + + 1-byte Hash Version (1 = SHA-1) + We infer the hash length (H) from this value. + + 1-byte number (C) of "chunks" + + 1-byte (reserved for later use) + Current clients should ignore this value. + +CHUNK LOOKUP: + + (C + 1) * 12 bytes listing the table of contents for the chunks: + First 4 bytes describe the chunk id. Value 0 is a terminating label. + Other 8 bytes provide the byte-offset in current file for chunk to + start. (Chunks are ordered contiguously in the file, so you can infer + the length using the next chunk position if necessary.) Each chunk + ID appears at most once. + + The remaining data in the body is described one chunk at a time, and + these chunks may be given in any order. Chunks are required unless + otherwise specified. + +CHUNK DATA: + + OID Fanout (ID: {'O', 'I', 'D', 'F'}) (256 * 4 bytes) + The ith entry, F[i], stores the number of OIDs with first + byte at most i. Thus F[255] stores the total + number of commits (N). + + OID Lookup (ID: {'O', 'I', 'D', 'L'}) (N * H bytes) + The OIDs for all commits in the graph, sorted in ascending order. + + Commit Data (ID: {'C', 'G', 'E', 'T' }) (N * (H + 16) bytes) + * The first H bytes are for the OID of the root tree. + * The next 8 bytes are for the positions of the first two parents + of the ith commit. Stores value 0xffffffff if no parent in that + position. If there are more than two parents, the second value + has its most-significant bit on and the other bits store an array + position into the Large Edge List chunk. + * The next 8 bytes store the generation number of the commit and + the commit time in seconds since EPOCH. The generation number + uses the higher 30 bits of the first 4 bytes, while the commit + time uses the 32 bits of the second 4 bytes, along with the lowest + 2 bits of the lowest byte, storing the 33rd and 34th bit of the + commit time. + + Large Edge List (ID: {'E', 'D', 'G', 'E'}) [Optional] + This list of 4-byte values store the second through nth parents for + all octopus merges. The second parent value in the commit data stores + an array position within this list along with the most-significant bit + on. Starting at that array position, iterate through this list of commit + positions for the parents until reaching a value with the most-significant + bit on. The other bits correspond to the position of the last parent. + +TRAILER: + + H-byte HASH-checksum of all of the above. diff --git a/Documentation/technical/commit-graph.txt b/Documentation/technical/commit-graph.txt new file mode 100644 index 0000000000..0550c6d0dc --- /dev/null +++ b/Documentation/technical/commit-graph.txt @@ -0,0 +1,163 @@ +Git Commit Graph Design Notes +============================= + +Git walks the commit graph for many reasons, including: + +1. Listing and filtering commit history. +2. Computing merge bases. + +These operations can become slow as the commit count grows. The merge +base calculation shows up in many user-facing commands, such as 'merge-base' +or 'status' and can take minutes to compute depending on history shape. + +There are two main costs here: + +1. Decompressing and parsing commits. +2. Walking the entire graph to satisfy topological order constraints. + +The commit graph file is a supplemental data structure that accelerates +commit graph walks. If a user downgrades or disables the 'core.commitGraph' +config setting, then the existing ODB is sufficient. The file is stored +as "commit-graph" either in the .git/objects/info directory or in the info +directory of an alternate. + +The commit graph file stores the commit graph structure along with some +extra metadata to speed up graph walks. By listing commit OIDs in lexi- +cographic order, we can identify an integer position for each commit and +refer to the parents of a commit using those integer positions. We use +binary search to find initial commits and then use the integer positions +for fast lookups during the walk. + +A consumer may load the following info for a commit from the graph: + +1. The commit OID. +2. The list of parents, along with their integer position. +3. The commit date. +4. The root tree OID. +5. The generation number (see definition below). + +Values 1-4 satisfy the requirements of parse_commit_gently(). + +Define the "generation number" of a commit recursively as follows: + + * A commit with no parents (a root commit) has generation number one. + + * A commit with at least one parent has generation number one more than + the largest generation number among its parents. + +Equivalently, the generation number of a commit A is one more than the +length of a longest path from A to a root commit. The recursive definition +is easier to use for computation and observing the following property: + + If A and B are commits with generation numbers N and M, respectively, + and N <= M, then A cannot reach B. That is, we know without searching + that B is not an ancestor of A because it is further from a root commit + than A. + + Conversely, when checking if A is an ancestor of B, then we only need + to walk commits until all commits on the walk boundary have generation + number at most N. If we walk commits using a priority queue seeded by + generation numbers, then we always expand the boundary commit with highest + generation number and can easily detect the stopping condition. + +This property can be used to significantly reduce the time it takes to +walk commits and determine topological relationships. Without generation +numbers, the general heuristic is the following: + + If A and B are commits with commit time X and Y, respectively, and + X < Y, then A _probably_ cannot reach B. + +This heuristic is currently used whenever the computation is allowed to +violate topological relationships due to clock skew (such as "git log" +with default order), but is not used when the topological order is +required (such as merge base calculations, "git log --graph"). + +In practice, we expect some commits to be created recently and not stored +in the commit graph. We can treat these commits as having "infinite" +generation number and walk until reaching commits with known generation +number. + +Design Details +-------------- + +- The commit graph file is stored in a file named 'commit-graph' in the + .git/objects/info directory. This could be stored in the info directory + of an alternate. + +- The core.commitGraph config setting must be on to consume graph files. + +- The file format includes parameters for the object ID hash function, + so a future change of hash algorithm does not require a change in format. + +Future Work +----------- + +- The commit graph feature currently does not honor commit grafts. This can + be remedied by duplicating or refactoring the current graft logic. + +- The 'commit-graph' subcommand does not have a "verify" mode that is + necessary for integration with fsck. + +- The file format includes room for precomputed generation numbers. These + are not currently computed, so all generation numbers will be marked as + 0 (or "uncomputed"). A later patch will include this calculation. + +- After computing and storing generation numbers, we must make graph + walks aware of generation numbers to gain the performance benefits they + enable. This will mostly be accomplished by swapping a commit-date-ordered + priority queue with one ordered by generation number. The following + operations are important candidates: + + - paint_down_to_common() + - 'log --topo-order' + +- Currently, parse_commit_gently() requires filling in the root tree + object for a commit. This passes through lookup_tree() and consequently + lookup_object(). Also, it calls lookup_commit() when loading the parents. + These method calls check the ODB for object existence, even if the + consumer does not need the content. For example, we do not need the + tree contents when computing merge bases. Now that commit parsing is + removed from the computation time, these lookup operations are the + slowest operations keeping graph walks from being fast. Consider + loading these objects without verifying their existence in the ODB and + only loading them fully when consumers need them. Consider a method + such as "ensure_tree_loaded(commit)" that fully loads a tree before + using commit->tree. + +- The current design uses the 'commit-graph' subcommand to generate the graph. + When this feature stabilizes enough to recommend to most users, we should + add automatic graph writes to common operations that create many commits. + For example, one could compute a graph on 'clone', 'fetch', or 'repack' + commands. + +- A server could provide a commit graph file as part of the network protocol + to avoid extra calculations by clients. This feature is only of benefit if + the user is willing to trust the file, because verifying the file is correct + is as hard as computing it from scratch. + +Related Links +------------- +[0] https://bugs.chromium.org/p/git/issues/detail?id=8 + Chromium work item for: Serialized Commit Graph + +[1] https://public-inbox.org/git/20110713070517.GC18566@sigill.intra.peff.net/ + An abandoned patch that introduced generation numbers. + +[2] https://public-inbox.org/git/20170908033403.q7e6dj7benasrjes@sigill.intra.peff.net/ + Discussion about generation numbers on commits and how they interact + with fsck. + +[3] https://public-inbox.org/git/20170908034739.4op3w4f2ma5s65ku@sigill.intra.peff.net/ + More discussion about generation numbers and not storing them inside + commit objects. A valuable quote: + + "I think we should be moving more in the direction of keeping + repo-local caches for optimizations. Reachability bitmaps have been + a big performance win. I think we should be doing the same with our + properties of commits. Not just generation numbers, but making it + cheap to access the graph structure without zlib-inflating whole + commit objects (i.e., packv4 or something like the "metapacks" I + proposed a few years ago)." + +[4] https://public-inbox.org/git/20180108154822.54829-1-git@jeffhostetler.com/T/#u + A patch to remove the ahead-behind calculation from 'status'. diff --git a/Documentation/technical/pack-format.txt b/Documentation/technical/pack-format.txt index 8e5bf60be3..70a99fd142 100644 --- a/Documentation/technical/pack-format.txt +++ b/Documentation/technical/pack-format.txt @@ -36,6 +36,98 @@ Git pack format - The trailer records 20-byte SHA-1 checksum of all of the above. +=== Object types + +Valid object types are: + +- OBJ_COMMIT (1) +- OBJ_TREE (2) +- OBJ_BLOB (3) +- OBJ_TAG (4) +- OBJ_OFS_DELTA (6) +- OBJ_REF_DELTA (7) + +Type 5 is reserved for future expansion. Type 0 is invalid. + +=== Deltified representation + +Conceptually there are only four object types: commit, tree, tag and +blob. However to save space, an object could be stored as a "delta" of +another "base" object. These representations are assigned new types +ofs-delta and ref-delta, which is only valid in a pack file. + +Both ofs-delta and ref-delta store the "delta" to be applied to +another object (called 'base object') to reconstruct the object. The +difference between them is, ref-delta directly encodes 20-byte base +object name. If the base object is in the same pack, ofs-delta encodes +the offset of the base object in the pack instead. + +The base object could also be deltified if it's in the same pack. +Ref-delta can also refer to an object outside the pack (i.e. the +so-called "thin pack"). When stored on disk however, the pack should +be self contained to avoid cyclic dependency. + +The delta data is a sequence of instructions to reconstruct an object +from the base object. If the base object is deltified, it must be +converted to canonical form first. Each instruction appends more and +more data to the target object until it's complete. There are two +supported instructions so far: one for copy a byte range from the +source object and one for inserting new data embedded in the +instruction itself. + +Each instruction has variable length. Instruction type is determined +by the seventh bit of the first octet. The following diagrams follow +the convention in RFC 1951 (Deflate compressed data format). + +==== Instruction to copy from base object + + +----------+---------+---------+---------+---------+-------+-------+-------+ + | 1xxxxxxx | offset1 | offset2 | offset3 | offset4 | size1 | size2 | size3 | + +----------+---------+---------+---------+---------+-------+-------+-------+ + +This is the instruction format to copy a byte range from the source +object. It encodes the offset to copy from and the number of bytes to +copy. Offset and size are in little-endian order. + +All offset and size bytes are optional. This is to reduce the +instruction size when encoding small offsets or sizes. The first seven +bits in the first octet determines which of the next seven octets is +present. If bit zero is set, offset1 is present. If bit one is set +offset2 is present and so on. + +Note that a more compact instruction does not change offset and size +encoding. For example, if only offset2 is omitted like below, offset3 +still contains bits 16-23. It does not become offset2 and contains +bits 8-15 even if it's right next to offset1. + + +----------+---------+---------+ + | 10000101 | offset1 | offset3 | + +----------+---------+---------+ + +In its most compact form, this instruction only takes up one byte +(0x80) with both offset and size omitted, which will have default +values zero. There is another exception: size zero is automatically +converted to 0x10000. + +==== Instruction to add new data + + +----------+============+ + | 0xxxxxxx | data | + +----------+============+ + +This is the instruction to construct target object without the base +object. The following data is appended to the target object. The first +seven bits of the first octet determines the size of data in +bytes. The size must be non-zero. + +==== Reserved instruction + + +----------+============ + | 00000000 | + +----------+============ + +This is the instruction reserved for future expansion. + == Original (version 1) pack-*.idx files have the following format: - The header consists of 256 4-byte network byte order diff --git a/Documentation/technical/protocol-v2.txt b/Documentation/technical/protocol-v2.txt new file mode 100644 index 0000000000..d7b6f38e0a --- /dev/null +++ b/Documentation/technical/protocol-v2.txt @@ -0,0 +1,405 @@ + Git Wire Protocol, Version 2 +============================== + +This document presents a specification for a version 2 of Git's wire +protocol. Protocol v2 will improve upon v1 in the following ways: + + * Instead of multiple service names, multiple commands will be + supported by a single service + * Easily extendable as capabilities are moved into their own section + of the protocol, no longer being hidden behind a NUL byte and + limited by the size of a pkt-line + * Separate out other information hidden behind NUL bytes (e.g. agent + string as a capability and symrefs can be requested using 'ls-refs') + * Reference advertisement will be omitted unless explicitly requested + * ls-refs command to explicitly request some refs + * Designed with http and stateless-rpc in mind. With clear flush + semantics the http remote helper can simply act as a proxy + +In protocol v2 communication is command oriented. When first contacting a +server a list of capabilities will advertised. Some of these capabilities +will be commands which a client can request be executed. Once a command +has completed, a client can reuse the connection and request that other +commands be executed. + + Packet-Line Framing +--------------------- + +All communication is done using packet-line framing, just as in v1. See +`Documentation/technical/pack-protocol.txt` and +`Documentation/technical/protocol-common.txt` for more information. + +In protocol v2 these special packets will have the following semantics: + + * '0000' Flush Packet (flush-pkt) - indicates the end of a message + * '0001' Delimiter Packet (delim-pkt) - separates sections of a message + + Initial Client Request +------------------------ + +In general a client can request to speak protocol v2 by sending +`version=2` through the respective side-channel for the transport being +used which inevitably sets `GIT_PROTOCOL`. More information can be +found in `pack-protocol.txt` and `http-protocol.txt`. In all cases the +response from the server is the capability advertisement. + + Git Transport +~~~~~~~~~~~~~~~ + +When using the git:// transport, you can request to use protocol v2 by +sending "version=2" as an extra parameter: + + 003egit-upload-pack /project.git\0host=myserver.com\0\0version=2\0 + + SSH and File Transport +~~~~~~~~~~~~~~~~~~~~~~~~ + +When using either the ssh:// or file:// transport, the GIT_PROTOCOL +environment variable must be set explicitly to include "version=2". + + HTTP Transport +~~~~~~~~~~~~~~~~ + +When using the http:// or https:// transport a client makes a "smart" +info/refs request as described in `http-protocol.txt` and requests that +v2 be used by supplying "version=2" in the `Git-Protocol` header. + + C: Git-Protocol: version=2 + C: + C: GET $GIT_URL/info/refs?service=git-upload-pack HTTP/1.0 + +A v2 server would reply: + + S: 200 OK + S: <Some headers> + S: ... + S: + S: 000eversion 2\n + S: <capability-advertisement> + +Subsequent requests are then made directly to the service +`$GIT_URL/git-upload-pack`. (This works the same for git-receive-pack). + + Capability Advertisement +-------------------------- + +A server which decides to communicate (based on a request from a client) +using protocol version 2, notifies the client by sending a version string +in its initial response followed by an advertisement of its capabilities. +Each capability is a key with an optional value. Clients must ignore all +unknown keys. Semantics of unknown values are left to the definition of +each key. Some capabilities will describe commands which can be requested +to be executed by the client. + + capability-advertisement = protocol-version + capability-list + flush-pkt + + protocol-version = PKT-LINE("version 2" LF) + capability-list = *capability + capability = PKT-LINE(key[=value] LF) + + key = 1*(ALPHA | DIGIT | "-_") + value = 1*(ALPHA | DIGIT | " -_.,?\/{}[]()<>!@#$%^&*+=:;") + + Command Request +----------------- + +After receiving the capability advertisement, a client can then issue a +request to select the command it wants with any particular capabilities +or arguments. There is then an optional section where the client can +provide any command specific parameters or queries. Only a single +command can be requested at a time. + + request = empty-request | command-request + empty-request = flush-pkt + command-request = command + capability-list + [command-args] + flush-pkt + command = PKT-LINE("command=" key LF) + command-args = delim-pkt + *command-specific-arg + + command-specific-args are packet line framed arguments defined by + each individual command. + +The server will then check to ensure that the client's request is +comprised of a valid command as well as valid capabilities which were +advertised. If the request is valid the server will then execute the +command. A server MUST wait till it has received the client's entire +request before issuing a response. The format of the response is +determined by the command being executed, but in all cases a flush-pkt +indicates the end of the response. + +When a command has finished, and the client has received the entire +response from the server, a client can either request that another +command be executed or can terminate the connection. A client may +optionally send an empty request consisting of just a flush-pkt to +indicate that no more requests will be made. + + Capabilities +-------------- + +There are two different types of capabilities: normal capabilities, +which can be used to to convey information or alter the behavior of a +request, and commands, which are the core actions that a client wants to +perform (fetch, push, etc). + +Protocol version 2 is stateless by default. This means that all commands +must only last a single round and be stateless from the perspective of the +server side, unless the client has requested a capability indicating that +state should be maintained by the server. Clients MUST NOT require state +management on the server side in order to function correctly. This +permits simple round-robin load-balancing on the server side, without +needing to worry about state management. + + agent +~~~~~~~ + +The server can advertise the `agent` capability with a value `X` (in the +form `agent=X`) to notify the client that the server is running version +`X`. The client may optionally send its own agent string by including +the `agent` capability with a value `Y` (in the form `agent=Y`) in its +request to the server (but it MUST NOT do so if the server did not +advertise the agent capability). The `X` and `Y` strings may contain any +printable ASCII characters except space (i.e., the byte range 32 < x < +127), and are typically of the form "package/version" (e.g., +"git/1.8.3.1"). The agent strings are purely informative for statistics +and debugging purposes, and MUST NOT be used to programmatically assume +the presence or absence of particular features. + + ls-refs +~~~~~~~~~ + +`ls-refs` is the command used to request a reference advertisement in v2. +Unlike the current reference advertisement, ls-refs takes in arguments +which can be used to limit the refs sent from the server. + +Additional features not supported in the base command will be advertised +as the value of the command in the capability advertisement in the form +of a space separated list of features: "<command>=<feature 1> <feature 2>" + +ls-refs takes in the following arguments: + + symrefs + In addition to the object pointed by it, show the underlying ref + pointed by it when showing a symbolic ref. + peel + Show peeled tags. + ref-prefix <prefix> + When specified, only references having a prefix matching one of + the provided prefixes are displayed. + +The output of ls-refs is as follows: + + output = *ref + flush-pkt + ref = PKT-LINE(obj-id SP refname *(SP ref-attribute) LF) + ref-attribute = (symref | peeled) + symref = "symref-target:" symref-target + peeled = "peeled:" obj-id + + fetch +~~~~~~~ + +`fetch` is the command used to fetch a packfile in v2. It can be looked +at as a modified version of the v1 fetch where the ref-advertisement is +stripped out (since the `ls-refs` command fills that role) and the +message format is tweaked to eliminate redundancies and permit easy +addition of future extensions. + +Additional features not supported in the base command will be advertised +as the value of the command in the capability advertisement in the form +of a space separated list of features: "<command>=<feature 1> <feature 2>" + +A `fetch` request can take the following arguments: + + want <oid> + Indicates to the server an object which the client wants to + retrieve. Wants can be anything and are not limited to + advertised objects. + + have <oid> + Indicates to the server an object which the client has locally. + This allows the server to make a packfile which only contains + the objects that the client needs. Multiple 'have' lines can be + supplied. + + done + Indicates to the server that negotiation should terminate (or + not even begin if performing a clone) and that the server should + use the information supplied in the request to construct the + packfile. + + thin-pack + Request that a thin pack be sent, which is a pack with deltas + which reference base objects not contained within the pack (but + are known to exist at the receiving end). This can reduce the + network traffic significantly, but it requires the receiving end + to know how to "thicken" these packs by adding the missing bases + to the pack. + + no-progress + Request that progress information that would normally be sent on + side-band channel 2, during the packfile transfer, should not be + sent. However, the side-band channel 3 is still used for error + responses. + + include-tag + Request that annotated tags should be sent if the objects they + point to are being sent. + + ofs-delta + Indicate that the client understands PACKv2 with delta referring + to its base by position in pack rather than by an oid. That is, + they can read OBJ_OFS_DELTA (ake type 6) in a packfile. + +If the 'shallow' feature is advertised the following arguments can be +included in the clients request as well as the potential addition of the +'shallow-info' section in the server's response as explained below. + + shallow <oid> + A client must notify the server of all commits for which it only + has shallow copies (meaning that it doesn't have the parents of + a commit) by supplying a 'shallow <oid>' line for each such + object so that the server is aware of the limitations of the + client's history. This is so that the server is aware that the + client may not have all objects reachable from such commits. + + deepen <depth> + Requests that the fetch/clone should be shallow having a commit + depth of <depth> relative to the remote side. + + deepen-relative + Requests that the semantics of the "deepen" command be changed + to indicate that the depth requested is relative to the client's + current shallow boundary, instead of relative to the requested + commits. + + deepen-since <timestamp> + Requests that the shallow clone/fetch should be cut at a + specific time, instead of depth. Internally it's equivalent to + doing "git rev-list --max-age=<timestamp>". Cannot be used with + "deepen". + + deepen-not <rev> + Requests that the shallow clone/fetch should be cut at a + specific revision specified by '<rev>', instead of a depth. + Internally it's equivalent of doing "git rev-list --not <rev>". + Cannot be used with "deepen", but can be used with + "deepen-since". + +The response of `fetch` is broken into a number of sections separated by +delimiter packets (0001), with each section beginning with its section +header. + + output = *section + section = (acknowledgments | shallow-info | packfile) + (flush-pkt | delim-pkt) + + acknowledgments = PKT-LINE("acknowledgments" LF) + (nak | *ack) + (ready) + ready = PKT-LINE("ready" LF) + nak = PKT-LINE("NAK" LF) + ack = PKT-LINE("ACK" SP obj-id LF) + + shallow-info = PKT-LINE("shallow-info" LF) + *PKT-LINE((shallow | unshallow) LF) + shallow = "shallow" SP obj-id + unshallow = "unshallow" SP obj-id + + packfile = PKT-LINE("packfile" LF) + *PKT-LINE(%x01-03 *%x00-ff) + + acknowledgments section + * If the client determines that it is finished with negotiations + by sending a "done" line, the acknowledgments sections MUST be + omitted from the server's response. + + * Always begins with the section header "acknowledgments" + + * The server will respond with "NAK" if none of the object ids sent + as have lines were common. + + * The server will respond with "ACK obj-id" for all of the + object ids sent as have lines which are common. + + * A response cannot have both "ACK" lines as well as a "NAK" + line. + + * The server will respond with a "ready" line indicating that + the server has found an acceptable common base and is ready to + make and send a packfile (which will be found in the packfile + section of the same response) + + * If the server has found a suitable cut point and has decided + to send a "ready" line, then the server can decide to (as an + optimization) omit any "ACK" lines it would have sent during + its response. This is because the server will have already + determined the objects it plans to send to the client and no + further negotiation is needed. + + shallow-info section + * If the client has requested a shallow fetch/clone, a shallow + client requests a fetch or the server is shallow then the + server's response may include a shallow-info section. The + shallow-info section will be included if (due to one of the + above conditions) the server needs to inform the client of any + shallow boundaries or adjustments to the clients already + existing shallow boundaries. + + * Always begins with the section header "shallow-info" + + * If a positive depth is requested, the server will compute the + set of commits which are no deeper than the desired depth. + + * The server sends a "shallow obj-id" line for each commit whose + parents will not be sent in the following packfile. + + * The server sends an "unshallow obj-id" line for each commit + which the client has indicated is shallow, but is no longer + shallow as a result of the fetch (due to its parents being + sent in the following packfile). + + * The server MUST NOT send any "unshallow" lines for anything + which the client has not indicated was shallow as a part of + its request. + + * This section is only included if a packfile section is also + included in the response. + + packfile section + * This section is only included if the client has sent 'want' + lines in its request and either requested that no more + negotiation be done by sending 'done' or if the server has + decided it has found a sufficient cut point to produce a + packfile. + + * Always begins with the section header "packfile" + + * The transmission of the packfile begins immediately after the + section header + + * The data transfer of the packfile is always multiplexed, using + the same semantics of the 'side-band-64k' capability from + protocol version 1. This means that each packet, during the + packfile data stream, is made up of a leading 4-byte pkt-line + length (typical of the pkt-line format), followed by a 1-byte + stream code, followed by the actual data. + + The stream code can be one of: + 1 - pack data + 2 - progress messages + 3 - fatal error message just before stream aborts + + server-option +~~~~~~~~~~~~~~~ + +If advertised, indicates that any number of server specific options can be +included in a request. This is done by sending each option as a +"server-option=<option>" capability line in the capability-list section of +a request. + +The provided options must not contain a NUL or LF character. diff --git a/Documentation/technical/shallow.txt b/Documentation/technical/shallow.txt index 5183b15422..01dedfe9ff 100644 --- a/Documentation/technical/shallow.txt +++ b/Documentation/technical/shallow.txt @@ -8,20 +8,22 @@ repo, and therefore grafts are introduced pretending that these commits have no parents. ********************************************************* -The basic idea is to write the SHA-1s of shallow commits into -$GIT_DIR/shallow, and handle its contents like the contents -of $GIT_DIR/info/grafts (with the difference that shallow -cannot contain parent information). - -This information is stored in a new file instead of grafts, or -even the config, since the user should not touch that file -at all (even throughout development of the shallow clone, it -was never manually edited!). +$GIT_DIR/shallow lists commit object names and tells Git to +pretend as if they are root commits (e.g. "git log" traversal +stops after showing them; "git fsck" does not complain saying +the commits listed on their "parent" lines do not exist). Each line contains exactly one SHA-1. When read, a commit_graft will be constructed, which has nr_parent < 0 to make it easier to discern from user provided grafts. +Note that the shallow feature could not be changed easily to +use replace refs: a commit containing a `mergetag` is not allowed +to be replaced, not even by a root commit. Such a commit can be +made shallow, though. Also, having a `shallow` file explicitly +listing all the commits made shallow makes it a *lot* easier to +do shallow-specific things such as to deepen the history. + Since fsck-objects relies on the library to read the objects, it honours shallow commits automatically. |