summaryrefslogtreecommitdiff
path: root/Documentation/technical
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/technical')
-rw-r--r--Documentation/technical/api-trace2.txt4
-rw-r--r--Documentation/technical/hash-function-transition.txt2
-rw-r--r--Documentation/technical/packfile-uri.txt15
-rw-r--r--Documentation/technical/partial-clone.txt6
-rw-r--r--Documentation/technical/protocol-v2.txt2
-rw-r--r--Documentation/technical/remembering-renames.txt671
6 files changed, 684 insertions, 16 deletions
diff --git a/Documentation/technical/api-trace2.txt b/Documentation/technical/api-trace2.txt
index 3f52f981a2..037a91cbca 100644
--- a/Documentation/technical/api-trace2.txt
+++ b/Documentation/technical/api-trace2.txt
@@ -396,14 +396,14 @@ only present on the "start" and "atexit" events.
}
------------
-`"discard"`::
+`"too_many_files"`::
This event is written to the git-trace2-discard sentinel file if there
are too many files in the target trace directory (see the
trace2.maxFiles config option).
+
------------
{
- "event":"discard",
+ "event":"too_many_files",
...
}
------------
diff --git a/Documentation/technical/hash-function-transition.txt b/Documentation/technical/hash-function-transition.txt
index 7c1630bf83..260224b033 100644
--- a/Documentation/technical/hash-function-transition.txt
+++ b/Documentation/technical/hash-function-transition.txt
@@ -599,7 +599,7 @@ supports four different modes of operation:
convert any object names written to output to SHA-1, but store
objects using SHA-256. This allows users to test the code with no
visible behavior change except for performance. This allows
- allows running even tests that assume the SHA-1 hash function, to
+ running even tests that assume the SHA-1 hash function, to
sanity-check the behavior of the new mode.
2. ("early transition") Allow both SHA-1 and SHA-256 object names in
diff --git a/Documentation/technical/packfile-uri.txt b/Documentation/technical/packfile-uri.txt
index f7eabc6c76..1eb525fe76 100644
--- a/Documentation/technical/packfile-uri.txt
+++ b/Documentation/technical/packfile-uri.txt
@@ -35,13 +35,14 @@ include some sort of non-trivial implementation in the Minimum Viable Product,
at least so that we can test the client.
This is the implementation: a feature, marked experimental, that allows the
-server to be configured by one or more `uploadpack.blobPackfileUri=<sha1>
-<uri>` entries. Whenever the list of objects to be sent is assembled, all such
-blobs are excluded, replaced with URIs. As noted in "Future work" below, the
-server can evolve in the future to support excluding other objects (or other
-implementations of servers could be made that support excluding other objects)
-without needing a protocol change, so clients should not expect that packfiles
-downloaded in this way only contain single blobs.
+server to be configured by one or more `uploadpack.blobPackfileUri=
+<object-hash> <pack-hash> <uri>` entries. Whenever the list of objects to be
+sent is assembled, all such blobs are excluded, replaced with URIs. As noted
+in "Future work" below, the server can evolve in the future to support
+excluding other objects (or other implementations of servers could be made
+that support excluding other objects) without needing a protocol change, so
+clients should not expect that packfiles downloaded in this way only contain
+single blobs.
Client design
-------------
diff --git a/Documentation/technical/partial-clone.txt b/Documentation/technical/partial-clone.txt
index 0780d30cac..a0dd7c66f2 100644
--- a/Documentation/technical/partial-clone.txt
+++ b/Documentation/technical/partial-clone.txt
@@ -242,8 +242,7 @@ remote in a specific order.
repository and can satisfy all such requests.
- Repack essentially treats promisor and non-promisor packfiles as 2
- distinct partitions and does not mix them. Repack currently only works
- on non-promisor packfiles and loose objects.
+ distinct partitions and does not mix them.
- Dynamic object fetching invokes fetch-pack once *for each item*
because most algorithms stumble upon a missing object and need to have
@@ -273,9 +272,6 @@ to use those promisor remotes in that order."
The user might want to work in a triangular work flow with multiple
promisor remotes that each have an incomplete view of the repository.
-- Allow repack to work on promisor packfiles (while keeping them distinct
- from non-promisor packfiles).
-
- Allow non-pathname-based filters to make use of packfile bitmaps (when
present). This was just an omission during the initial implementation.
diff --git a/Documentation/technical/protocol-v2.txt b/Documentation/technical/protocol-v2.txt
index a1e31367f4..1040d85319 100644
--- a/Documentation/technical/protocol-v2.txt
+++ b/Documentation/technical/protocol-v2.txt
@@ -540,7 +540,7 @@ An `object-info` request takes the following arguments:
Indicates to the server an object which the client wants to obtain
information for.
-The response of `object-info` is a list of the the requested object ids
+The response of `object-info` is a list of the requested object ids
and associated requested information, each separated by a single space.
output = info flush-pkt
diff --git a/Documentation/technical/remembering-renames.txt b/Documentation/technical/remembering-renames.txt
new file mode 100644
index 0000000000..2fd5cc88e0
--- /dev/null
+++ b/Documentation/technical/remembering-renames.txt
@@ -0,0 +1,671 @@
+Rebases and cherry-picks involve a sequence of merges whose results are
+recorded as new single-parent commits. The first parent side of those
+merges represent the "upstream" side, and often include a far larger set of
+changes than the second parent side. Traditionally, the renames on the
+first-parent side of that sequence of merges were repeatedly re-detected
+for every merge. This file explains why it is safe and effective during
+rebases and cherry-picks to remember renames on the upstream side of
+history as an optimization, assuming all merges are automatic and clean
+(i.e. no conflicts and not interrupted for user input or editing).
+
+Outline:
+
+ 0. Assumptions
+
+ 1. How rebasing and cherry-picking work
+
+ 2. Why the renames on MERGE_SIDE1 in any given pick are *always* a
+ superset of the renames on MERGE_SIDE1 for the next pick.
+
+ 3. Why any rename on MERGE_SIDE1 in any given pick is _almost_ always also
+ a rename on MERGE_SIDE1 for the next pick
+
+ 4. A detailed description of the the counter-examples to #3.
+
+ 5. Why the special cases in #4 are still fully reasonable to use to pair
+ up files for three-way content merging in the merge machinery, and why
+ they do not affect the correctness of the merge.
+
+ 6. Interaction with skipping of "irrelevant" renames
+
+ 7. Additional items that need to be cached
+
+ 8. How directory rename detection interacts with the above and why this
+ optimization is still safe even if merge.directoryRenames is set to
+ "true".
+
+
+=== 0. Assumptions ===
+
+There are two assumptions that will hold throughout this document:
+
+ * The upstream side where commits are transplanted to is treated as the
+ first parent side when rebase/cherry-pick call the merge machinery
+
+ * All merges are fully automatic
+
+and a third that will hold in sections 2-5 for simplicity, that I'll later
+address in section 8:
+
+ * No directory renames occur
+
+
+Let me explain more about each assumption and why I include it:
+
+
+The first assumption is merely for the purposes of making this document
+clearer; the optimization implementation does not actually depend upon it.
+However, the assumption does hold in all cases because it reflects the way
+that both rebase and cherry-pick were implemented; and the implementation
+of cherry-pick and rebase are not readily changeable for backwards
+compatibility reasons (see for example the discussion of the --ours and
+--theirs flag in the documentation of `git checkout`, particularly the
+comments about how they behave with rebase). The optimization avoids
+checking first-parent-ness, though. It checks the conditions that make the
+optimization valid instead, so it would still continue working if someone
+changed the parent ordering that cherry-pick and rebase use. But making
+this assumption does make this document much clearer and prevents me from
+having to repeat every example twice.
+
+If the second assumption is violated, then the optimization simply is
+turned off and thus isn't relevant to consider. The second assumption can
+also be stated as "there is no interruption for a user to resolve conflicts
+or to just further edit or tweak files". While real rebases and
+cherry-picks are often interrupted (either because it's an interactive
+rebase where the user requested to stop and edit, or because there were
+conflicts that the user needs to resolve), the cache of renames is not
+stored on disk, and thus is thrown away as soon as the rebase or cherry
+pick stops for the user to resolve the operation.
+
+The third assumption makes sections 2-5 simpler, and allows people to
+understand the basics of why this optimization is safe and effective, and
+then I can go back and address the specifics in section 8. It is probably
+also worth noting that if directory renames do occur, then the default of
+merge.directoryRenames being set to "conflict" means that the operation
+will stop for users to resolve the conflicts and the cache will be thrown
+away, and thus that there won't be an optimization to apply. So, the only
+reason we need to address directory renames specifically, is that some
+users will have set merge.directoryRenames to "true" to allow the merges to
+continue to proceed automatically. The optimization is still safe with
+this config setting, but we have to discuss a few more cases to show why;
+this discussion is deferred until section 8.
+
+
+=== 1. How rebasing and cherry-picking work ===
+
+Consider the following setup (from the git-rebase manpage):
+
+ A---B---C topic
+ /
+ D---E---F---G main
+
+After rebasing or cherry-picking topic onto main, this will appear as:
+
+ A'--B'--C' topic
+ /
+ D---E---F---G main
+
+The way the commits A', B', and C' are created is through a series of
+merges, where rebase or cherry-pick sequentially uses each of the three
+A-B-C commits in a special merge operation. Let's label the three commits
+in the merge operation as MERGE_BASE, MERGE_SIDE1, and MERGE_SIDE2. For
+this picture, the three commits for each of the three merges would be:
+
+To create A':
+ MERGE_BASE: E
+ MERGE_SIDE1: G
+ MERGE_SIDE2: A
+
+To create B':
+ MERGE_BASE: A
+ MERGE_SIDE1: A'
+ MERGE_SIDE2: B
+
+To create C':
+ MERGE_BASE: B
+ MERGE_SIDE1: B'
+ MERGE_SIDE2: C
+
+Sometimes, folks are surprised that these three-way merges are done. It
+can be useful in understanding these three-way merges to view them in a
+slightly different light. For example, in creating C', you can view it as
+either:
+
+ * Apply the changes between B & C to B'
+ * Apply the changes between B & B' to C
+
+Conceptually the two statements above are the same as a three-way merge of
+B, B', and C, at least the parts before you decide to record a commit.
+
+
+=== 2. Why the renames on MERGE_SIDE1 in any given pick are always a ===
+=== superset of the renames on MERGE_SIDE1 for the next pick. ===
+
+The merge machinery uses the filenames it is fed from MERGE_BASE,
+MERGE_SIDE1, and MERGE_SIDE2. It will only move content to a different
+filename under one of three conditions:
+
+ * To make both pieces of a conflict available to a user during conflict
+ resolution (examples: directory/file conflict, add/add type conflict
+ such as symlink vs. regular file)
+
+ * When MERGE_SIDE1 renames the file.
+
+ * When MERGE_SIDE2 renames the file.
+
+First, let's remember what commits are involved in the first and second
+picks of the cherry-pick or rebase sequence:
+
+To create A':
+ MERGE_BASE: E
+ MERGE_SIDE1: G
+ MERGE_SIDE2: A
+
+To create B':
+ MERGE_BASE: A
+ MERGE_SIDE1: A'
+ MERGE_SIDE2: B
+
+So, in particular, we need to show that the renames between E and G are a
+superset of those between A and A'.
+
+A' is created by the first merge. A' will only have renames for one of the
+three reasons listed above. The first case, a conflict, results in a
+situation where the cache is dropped and thus this optimization doesn't
+take effect, so we need not consider that case. The third case, a rename
+on MERGE_SIDE2 (i.e. from G to A), will show up in A' but it also shows up
+in A -- therefore when diffing A and A' that path does not show up as a
+rename. The only remaining way for renames to show up in A' is for the
+rename to come from MERGE_SIDE1. Therefore, all renames between A and A'
+are a subset of those between E and G. Equivalently, all renames between E
+and G are a superset of those between A and A'.
+
+
+=== 3. Why any rename on MERGE_SIDE1 in any given pick is _almost_ ===
+=== always also a rename on MERGE_SIDE1 for the next pick. ===
+
+Let's again look at the first two picks:
+
+To create A':
+ MERGE_BASE: E
+ MERGE_SIDE1: G
+ MERGE_SIDE2: A
+
+To create B':
+ MERGE_BASE: A
+ MERGE_SIDE1: A'
+ MERGE_SIDE2: B
+
+Now let's look at any given rename from MERGE_SIDE1 of the first pick, i.e.
+any given rename from E to G. Let's use the filenames 'oldfile' and
+'newfile' for demonstration purposes. That first pick will function as
+follows; when the rename is detected, the merge machinery will do a
+three-way content merge of the following:
+ E:oldfile
+ G:newfile
+ A:oldfile
+and produce a new result:
+ A':newfile
+
+Note above that I've assumed that E->A did not rename oldfile. If that
+side did rename, then we most likely have a rename/rename(1to2) conflict
+that will cause the rebase or cherry-pick operation to halt and drop the
+in-memory cache of renames and thus doesn't need to be considered further.
+In the special case that E->A does rename the file but also renames it to
+newfile, then there is no conflict from the renaming and the merge can
+succeed. In this special case, the rename is not valid to cache because
+the second merge will find A:newfile in the MERGE_BASE (see also the new
+testcases in t6429 with "rename same file identically" in their
+description). So a rename/rename(1to1) needs to be specially handled by
+pruning renames from the cache and decrementing the dir_rename_counts in
+the current and leading directories associated with those renames. Or,
+since these are really rare, one could just take the easy way out and
+disable the remembering renames optimization when a rename/rename(1to1)
+happens.
+
+The previous paragraph handled the cases for E->A renaming oldfile, let's
+continue assuming that oldfile is not renamed in A.
+
+As per the diagram for creating B', MERGE_SIDE1 involves the changes from A
+to A'. So, we are curious whether A:oldfile and A':newfile will be viewed
+as renames. Note that:
+
+ * There will be no A':oldfile (because there could not have been a
+ G:oldfile as we do not do break detection in the merge machinery and
+ G:newfile was detected as a rename, and by the construction of the
+ rename above that merged cleanly, the merge machinery will ensure there
+ is no 'oldfile' in the result).
+
+ * There will be no A:newfile (if there had been, we would have had a
+ rename/add conflict).
+
+ * Clearly A:oldfile and A':newfile are "related" (A':newfile came from a
+ clean three-way content merge involving A:oldfile).
+
+We can also expound on the third point above, by noting that three-way
+content merges can also be viewed as applying the differences between the
+base and one side to the other side. Thus we can view A':newfile as
+having been created by taking the changes between E:oldfile and G:newfile
+(which were detected as being related, i.e. <50% changed) to A:oldfile.
+
+Thus A:oldfile and A':newfile are just as related as E:oldfile and
+G:newfile are -- they have exactly identical differences. Since the latter
+were detected as renames, A:oldfile and A':newfile should also be
+detectable as renames almost always.
+
+
+=== 4. A detailed description of the counter-examples to #3. ===
+
+We already noted in section 3 that rename/rename(1to1) (i.e. both sides
+renaming a file the same way) was one counter-example. The more
+interesting bit, though, is why did we need to use the "almost" qualifier
+when stating that A:oldfile and A':newfile are "almost" always detectable
+as renames?
+
+Let's repeat an earlier point that section 3 made:
+
+ A':newfile was created by applying the changes between E:oldfile and
+ G:newfile to A:oldfile. The changes between E:oldfile and G:newfile were
+ <50% of the size of E:oldfile.
+
+If those changes that were <50% of the size of E:oldfile are also <50% of
+the size of A:oldfile, then A:oldfile and A':newfile will be detectable as
+renames. However, if there is a dramatic size reduction between E:oldfile
+and A:oldfile (but the changes between E:oldfile, G:newfile, and A:oldfile
+still somehow merge cleanly), then traditional rename detection would not
+detect A:oldfile and A':newfile as renames.
+
+Here's an example where that can happen:
+ * E:oldfile had 20 lines
+ * G:newfile added 10 new lines at the beginning of the file
+ * A:oldfile kept the first 3 lines of the file, and deleted all the rest
+then
+ => A':newfile would have 13 lines, 3 of which matches those in A:oldfile.
+E:oldfile -> G:newfile would be detected as a rename, but A:oldfile and
+A':newfile would not be.
+
+
+=== 5. Why the special cases in #4 are still fully reasonable to use to ===
+=== pair up files for three-way content merging in the merge machinery, ===
+=== and why they do not affect the correctness of the merge. ===
+
+In the rename/rename(1to1) case, A:newfile and A':newfile are not renames
+since they use the *same* filename. However, files with the same filename
+are obviously fine to pair up for three-way content merging (the merge
+machinery has never employed break detection). The interesting
+counter-example case is thus not the rename/rename(1to1) case, but the case
+where A did not rename oldfile. That was the case that we spent most of
+the time discussing in sections 3 and 4. The remainder of this section
+will be devoted to that case as well.
+
+So, even if A:oldfile and A':newfile aren't detectable as renames, why is
+it still reasonable to pair them up for three-way content merging in the
+merge machinery? There are multiple reasons:
+
+ * As noted in sections 3 and 4, the diff between A:oldfile and A':newfile
+ is *exactly* the same as the diff between E:oldfile and G:newfile. The
+ latter pair were detected as renames, so it seems unlikely to surprise
+ users for us to treat A:oldfile and A':newfile as renames.
+
+ * In fact, "oldfile" and "newfile" were at one point detected as renames
+ due to how they were constructed in the E..G chain. And we used that
+ information once already in this rebase/cherry-pick. I think users
+ would be unlikely to be surprised at us continuing to treat the files
+ as renames and would quickly understand why we had done so.
+
+ * Marking or declaring files as renames is *not* the end goal for merges.
+ Merges use renames to determine which files make sense to be paired up
+ for three-way content merges.
+
+ * A:oldfile and A':newfile were _already_ paired up in a three-way
+ content merge; that is how A':newfile was created. In fact, that
+ three-way content merge was clean. So using them again in a later
+ three-way content merge seems very reasonable.
+
+However, the above is focusing on the common scenarios. Let's try to look
+at all possible unusual scenarios and compare without the optimization to
+with the optimization. Consider the following theoretical cases; we will
+then dive into each to determine which of them are possible,
+and if so, what they mean:
+
+ 1. Without the optimization, the second merge results in a conflict.
+ With the optimization, the second merge also results in a conflict.
+ Questions: Are the conflicts confusingly different? Better in one case?
+
+ 2. Without the optimization, the second merge results in NO conflict.
+ With the optimization, the second merge also results in NO conflict.
+ Questions: Are the merges the same?
+
+ 3. Without the optimization, the second merge results in a conflict.
+ With the optimization, the second merge results in NO conflict.
+ Questions: Possible? Bug, bugfix, or something else?
+
+ 4. Without the optimization, the second merge results in NO conflict.
+ With the optimization, the second merge results in a conflict.
+ Questions: Possible? Bug, bugfix, or something else?
+
+I'll consider all four cases, but out of order.
+
+The fourth case is impossible. For the code without the remembering
+renames optimization to not get a conflict, B:oldfile would need to exactly
+match A:oldfile -- if it doesn't, there would be a modify/delete conflict.
+If A:oldfile matches B:oldfile exactly, then a three-way content merge
+between A:oldfile, A':newfile, and B:oldfile would have no conflict and
+just give us the version of newfile from A' as the result.
+
+From the same logic as the above paragraph, the second case would indeed
+result in identical merges. When A:oldfile exactly matches B:oldfile, an
+undetected rename would say, "Oh, I see one side didn't modify 'oldfile'
+and the other side deleted it. I'll delete it. And I see you have this
+brand new file named 'newfile' in A', so I'll keep it." That gives the
+same results as three-way content merging A:oldfile, A':newfile, and
+B:oldfile -- a removal of oldfile with the version of newfile from A'
+showing up in the result.
+
+The third case is interesting. It means that A:oldfile and A':newfile were
+not just similar enough, but that the changes between them did not conflict
+with the changes between A:oldfile and B:oldfile. This would validate our
+hunch that the files were similar enough to be used in a three-way content
+merge, and thus seems entirely correct for us to have used them that way.
+(Sidenote: One particular example here may be enlightening. Let's say that
+B was an immediate revert of A. B clearly would have been a clean revert
+of A, since A was B's immediate parent. One would assume that if you can
+pick a commit, you should also be able to cherry-pick its immediate revert.
+However, this is one of those funny corner cases; without this
+optimization, we just successfully picked a commit cleanly, but we are
+unable to cherry-pick its immediate revert due to the size differences
+between E:oldfile and A:oldfile.)
+
+That leaves only the first case to consider -- when we get conflicts both
+with or without the optimization. Without the optimization, we'll have a
+modify/delete conflict, where both A':newfile and B:oldfile are left in the
+tree for the user to deal with and no hints about the potential similarity
+between the two. With the optimization, we'll have a three-way content
+merged A:oldfile, A':newfile, and B:oldfile with conflict markers
+suggesting we thought the files were related but giving the user the chance
+to resolve. As noted above, I don't think users will find us treating
+'oldfile' and 'newfile' as related as a surprise since they were between E
+and G. In any event, though, this case shouldn't be concerning since we
+hit a conflict in both cases, told the user what we know, and asked them to
+resolve it.
+
+So, in summary, case 4 is impossible, case 2 yields the same behavior, and
+cases 1 and 3 seem to provide as good or better behavior with the
+optimization than without.
+
+
+=== 6. Interaction with skipping of "irrelevant" renames ===
+
+Previous optimizations involved skipping rename detection for paths
+considered to be "irrelevant". See for example the following commits:
+
+ * 32a56dfb99 ("merge-ort: precompute subset of sources for which we
+ need rename detection", 2021-03-11)
+ * 2fd9eda462 ("merge-ort: precompute whether directory rename
+ detection is needed", 2021-03-11)
+ * 9bd342137e ("diffcore-rename: determine which relevant_sources are
+ no longer relevant", 2021-03-13)
+
+Relevance is always determined by what the _other_ side of history has
+done, in terms of modifing a file that our side renamed, or adding a
+file to a directory which our side renamed. This means that a path
+that is "irrelevant" when picking the first commit of a series in a
+rebase or cherry-pick, may suddenly become "relevant" when picking the
+next commit.
+
+The upshot of this is that we can only cache rename detection results
+for relevant paths, and need to re-check relevance in subsequent
+commits. If those subsequent commits have additional paths that are
+relevant for rename detection, then we will need to redo rename
+detection -- though we can limit it to the paths for which we have not
+already detected renames.
+
+
+=== 7. Additional items that need to be cached ===
+
+It turns out we have to cache more than just renames; we also cache:
+
+ A) non-renames (i.e. unpaired deletes)
+ B) counts of renames within directories
+ C) sources that were marked as RELEVANT_LOCATION, but which were
+ downgraded to RELEVANT_NO_MORE
+ D) the toplevel trees involved in the merge
+
+These are all stored in struct rename_info, and respectively appear in
+ * cached_pairs (along side actual renames, just with a value of NULL)
+ * dir_rename_counts
+ * cached_irrelevant
+ * merge_trees
+
+The reason for (A) comes from the irrelevant renames skipping
+optimization discussed in section 6. The fact that irrelevant renames
+are skipped means we only get a subset of the potential renames
+detected and subsequent commits may need to run rename detection on
+the upstream side on a subset of the remaining renames (to get the
+renames that are relevant for that later commit). Since unpaired
+deletes are involved in rename detection too, we don't want to
+repeatedly check that those paths remain unpaired on the upstream side
+with every commit we are transplanting.
+
+The reason for (B) is that diffcore_rename_extended() is what
+generates the counts of renames by directory which is needed in
+directory rename detection, and if we don't run
+diffcore_rename_extended() again then we need to have the output from
+it, including dir_rename_counts, from the previous run.
+
+The reason for (C) is that merge-ort's tree traversal will again think
+those paths are relevant (marking them as RELEVANT_LOCATION), but the
+fact that they were downgraded to RELEVANT_NO_MORE means that
+dir_rename_counts already has the information we need for directory
+rename detection. (A path which becomes RELEVANT_CONTENT in a
+subsequent commit will be removed from cached_irrelevant.)
+
+The reason for (D) is that is how we determine whether the remember
+renames optimization can be used. In particular, remembering that our
+sequence of merges looks like:
+
+ Merge 1:
+ MERGE_BASE: E
+ MERGE_SIDE1: G
+ MERGE_SIDE2: A
+ => Creates A'
+
+ Merge 2:
+ MERGE_BASE: A
+ MERGE_SIDE1: A'
+ MERGE_SIDE2: B
+ => Creates B'
+
+It is the fact that the trees A and A' appear both in Merge 1 and in
+Merge 2, with A as a parent of A' that allows this optimization. So
+we store the trees to compare with what we are asked to merge next
+time.
+
+
+=== 8. How directory rename detection interacts with the above and ===
+=== why this optimization is still safe even if ===
+=== merge.directoryRenames is set to "true". ===
+
+As noted in the assumptions section:
+
+ """
+ ...if directory renames do occur, then the default of
+ merge.directoryRenames being set to "conflict" means that the operation
+ will stop for users to resolve the conflicts and the cache will be
+ thrown away, and thus that there won't be an optimization to apply.
+ So, the only reason we need to address directory renames specifically,
+ is that some users will have set merge.directoryRenames to "true" to
+ allow the merges to continue to proceed automatically.
+ """
+
+Let's remember that we need to look at how any given pick affects the next
+one. So let's again use the first two picks from the diagram in section
+one:
+
+ First pick does this three-way merge:
+ MERGE_BASE: E
+ MERGE_SIDE1: G
+ MERGE_SIDE2: A
+ => creates A'
+
+ Second pick does this three-way merge:
+ MERGE_BASE: A
+ MERGE_SIDE1: A'
+ MERGE_SIDE2: B
+ => creates B'
+
+Now, directory rename detection exists so that if one side of history
+renames a directory, and the other side adds a new file to the old
+directory, then the merge (with merge.directoryRenames=true) can move the
+file into the new directory. There are two qualitatively different ways to
+add a new file to an old directory: create a new file, or rename a file
+into that directory. Also, directory renames can be done on either side of
+history, so there are four cases to consider:
+
+ * MERGE_SIDE1 renames old dir, MERGE_SIDE2 adds new file to old dir
+ * MERGE_SIDE1 renames old dir, MERGE_SIDE2 renames file into old dir
+ * MERGE_SIDE1 adds new file to old dir, MERGE_SIDE2 renames old dir
+ * MERGE_SIDE1 renames file into old dir, MERGE_SIDE2 renames old dir
+
+One last note before we consider these four cases: There are some
+important properties about how we implement this optimization with
+respect to directory rename detection that we need to bear in mind
+while considering all of these cases:
+
+ * rename caching occurs *after* applying directory renames
+
+ * a rename created by directory rename detection is recorded for the side
+ of history that did the directory rename.
+
+ * dir_rename_counts, the nested map of
+ {oldname => {newname => count}},
+ is cached between runs as well. This basically means that directory
+ rename detection is also cached, though only on the side of history
+ that we cache renames for (MERGE_SIDE1 as far as this document is
+ concerned; see the assumptions section). Two interesting sub-notes
+ about these counts:
+
+ * If we need to perform rename-detection again on the given side (e.g.
+ some paths are relevant for rename detection that weren't before),
+ then we clear dir_rename_counts and recompute it, making use of
+ cached_pairs. The reason it is important to do this is optimizations
+ around RELEVANT_LOCATION exist to prevent us from computing
+ unnecessary renames for directory rename detection and from computing
+ dir_rename_counts for irrelevant directories; but those same renames
+ or directories may become necessary for subsequent merges. The
+ easiest way to "fix up" dir_rename_counts in such cases is to just
+ recompute it.
+
+ * If we prune rename/rename(1to1) entries from the cache, then we also
+ need to update dir_rename_counts to decrement the counts for the
+ involved directory and any relevant parent directories (to undo what
+ update_dir_rename_counts() in diffcore-rename.c incremented when the
+ rename was initially found). If we instead just disable the
+ remembering renames optimization when the exceedingly rare
+ rename/rename(1to1) cases occur, then dir_rename_counts will get
+ re-computed the next time rename detection occurs, as noted above.
+
+ * the side with multiple commits to pick, is the side of history that we
+ do NOT cache renames for. Thus, there are no additional commits to
+ change the number of renames in a directory, except for those done by
+ directory rename detection (which always pad the majority).
+
+ * the "renames" we cache are modified slightly by any directory rename,
+ as noted below.
+
+Now, with those notes out of the way, let's go through the four cases
+in order:
+
+Case 1: MERGE_SIDE1 renames old dir, MERGE_SIDE2 adds new file to old dir
+
+ This case looks like this:
+
+ MERGE_BASE: E, Has olddir/
+ MERGE_SIDE1: G, Renames olddir/ -> newdir/
+ MERGE_SIDE2: A, Adds olddir/newfile
+ => creates A', With newdir/newfile
+
+ MERGE_BASE: A, Has olddir/newfile
+ MERGE_SIDE1: A', Has newdir/newfile
+ MERGE_SIDE2: B, Modifies olddir/newfile
+ => expected B', with threeway-merged newdir/newfile from above
+
+ In this case, with the optimization, note that after the first commit:
+ * MERGE_SIDE1 remembers olddir/ -> newdir/
+ * MERGE_SIDE1 has cached olddir/newfile -> newdir/newfile
+ Given the cached rename noted above, the second merge can proceed as
+ expected without needing to perform rename detection from A -> A'.
+
+Case 2: MERGE_SIDE1 renames old dir, MERGE_SIDE2 renames file into old dir
+
+ This case looks like this:
+ MERGE_BASE: E oldfile, olddir/
+ MERGE_SIDE1: G oldfile, olddir/ -> newdir/
+ MERGE_SIDE2: A oldfile -> olddir/newfile
+ => creates A', With newdir/newfile representing original oldfile
+
+ MERGE_BASE: A olddir/newfile
+ MERGE_SIDE1: A' newdir/newfile
+ MERGE_SIDE2: B modify olddir/newfile
+ => expected B', with threeway-merged newdir/newfile from above
+
+ In this case, with the optimization, note that after the first commit:
+ * MERGE_SIDE1 remembers olddir/ -> newdir/
+ * MERGE_SIDE1 has cached olddir/newfile -> newdir/newfile
+ (NOT oldfile -> newdir/newfile; compare to case with
+ (p->status == 'R' && new_path) in possibly_cache_new_pair())
+
+ Given the cached rename noted above, the second merge can proceed as
+ expected without needing to perform rename detection from A -> A'.
+
+Case 3: MERGE_SIDE1 adds new file to old dir, MERGE_SIDE2 renames old dir
+
+ This case looks like this:
+
+ MERGE_BASE: E, Has olddir/
+ MERGE_SIDE1: G, Adds olddir/newfile
+ MERGE_SIDE2: A, Renames olddir/ -> newdir/
+ => creates A', With newdir/newfile
+
+ MERGE_BASE: A, Has newdir/, but no notion of newdir/newfile
+ MERGE_SIDE1: A', Has newdir/newfile
+ MERGE_SIDE2: B, Has newdir/, but no notion of newdir/newfile
+ => expected B', with newdir/newfile from A'
+
+ In this case, with the optimization, note that after the first commit there
+ were no renames on MERGE_SIDE1, and any renames on MERGE_SIDE2 are tossed.
+ But the second merge didn't need any renames so this is fine.
+
+Case 4: MERGE_SIDE1 renames file into old dir, MERGE_SIDE2 renames old dir
+
+ This case looks like this:
+
+ MERGE_BASE: E, Has olddir/
+ MERGE_SIDE1: G, Renames oldfile -> olddir/newfile
+ MERGE_SIDE2: A, Renames olddir/ -> newdir/
+ => creates A', With newdir/newfile representing original oldfile
+
+ MERGE_BASE: A, Has oldfile
+ MERGE_SIDE1: A', Has newdir/newfile
+ MERGE_SIDE2: B, Modifies oldfile
+ => expected B', with threeway-merged newdir/newfile from above
+
+ In this case, with the optimization, note that after the first commit:
+ * MERGE_SIDE1 remembers oldfile -> newdir/newfile
+ (NOT oldfile -> olddir/newfile; compare to case of second
+ block under p->status == 'R' in possibly_cache_new_pair())
+ * MERGE_SIDE2 renames are tossed because only MERGE_SIDE1 is remembered
+
+ Given the cached rename noted above, the second merge can proceed as
+ expected without needing to perform rename detection from A -> A'.
+
+Finally, I'll just note here that interactions with the
+skip-irrelevant-renames optimization means we sometimes don't detect
+renames for any files within a directory that was renamed, in which
+case we will not have been able to detect any rename for the directory
+itself. In such a case, we do not know whether the directory was
+renamed; we want to be careful to avoid cacheing some kind of "this
+directory was not renamed" statement. If we did, then a subsequent
+commit being rebased could add a file to the old directory, and the
+user would expect it to end up in the correct directory -- something
+our erroneous "this directory was not renamed" cache would preclude.