diff options
Diffstat (limited to 'Documentation/technical')
| -rw-r--r-- | Documentation/technical/api-diff.txt | 4 | ||||
| -rw-r--r-- | Documentation/technical/api-parse-options.txt | 4 | ||||
| -rw-r--r-- | Documentation/technical/api-revision-walking.txt | 4 | ||||
| -rw-r--r-- | Documentation/technical/index-format.txt | 41 | ||||
| -rw-r--r-- | Documentation/technical/multi-pack-index.txt | 109 | ||||
| -rw-r--r-- | Documentation/technical/pack-format.txt | 77 | ||||
| -rw-r--r-- | Documentation/technical/repository-version.txt | 26 | ||||
| -rw-r--r-- | Documentation/technical/rerere.txt | 186 |
8 files changed, 431 insertions, 20 deletions
diff --git a/Documentation/technical/api-diff.txt b/Documentation/technical/api-diff.txt index 8b001de0db..30fc0e9c93 100644 --- a/Documentation/technical/api-diff.txt +++ b/Documentation/technical/api-diff.txt @@ -18,8 +18,8 @@ Calling sequence ---------------- * Prepare `struct diff_options` to record the set of diff options, and - then call `diff_setup()` to initialize this structure. This sets up - the vanilla default. + then call `repo_diff_setup()` to initialize this structure. This + sets up the vanilla default. * Fill in the options structure to specify desired output format, rename detection, etc. `diff_opt_parse()` can be used to parse options given diff --git a/Documentation/technical/api-parse-options.txt b/Documentation/technical/api-parse-options.txt index 829b558110..2b036d7838 100644 --- a/Documentation/technical/api-parse-options.txt +++ b/Documentation/technical/api-parse-options.txt @@ -183,10 +183,6 @@ There are some macros to easily define options: scale the provided value by 1024, 1024^2 or 1024^3 respectively. The scaled value is put into `unsigned_long_var`. -`OPT_DATE(short, long, ×tamp_t_var, description)`:: - Introduce an option with date argument, see `approxidate()`. - The timestamp is put into `timestamp_t_var`. - `OPT_EXPIRY_DATE(short, long, ×tamp_t_var, description)`:: Introduce an option with expiry date argument, see `parse_expiry_date()`. The timestamp is put into `timestamp_t_var`. diff --git a/Documentation/technical/api-revision-walking.txt b/Documentation/technical/api-revision-walking.txt index 55b878ade8..03f9ea6ac4 100644 --- a/Documentation/technical/api-revision-walking.txt +++ b/Documentation/technical/api-revision-walking.txt @@ -15,9 +15,9 @@ revision list. Functions --------- -`init_revisions`:: +`repo_init_revisions`:: - Initialize a rev_info structure with default values. The second + Initialize a rev_info structure with default values. The third parameter may be NULL or can be prefix path, and then the `.prefix` variable will be set to it. This is typically the first function you want to call when you want to deal with a revision list. After calling diff --git a/Documentation/technical/index-format.txt b/Documentation/technical/index-format.txt index db3572626b..7c4d67aa6a 100644 --- a/Documentation/technical/index-format.txt +++ b/Documentation/technical/index-format.txt @@ -314,3 +314,44 @@ The remaining data of each directory block is grouped by type: - An ewah bitmap, the n-th bit indicates whether the n-th index entry is not CE_FSMONITOR_VALID. + +== End of Index Entry + + The End of Index Entry (EOIE) is used to locate the end of the variable + length index entries and the begining of the extensions. Code can take + advantage of this to quickly locate the index extensions without having + to parse through all of the index entries. + + Because it must be able to be loaded before the variable length cache + entries and other index extensions, this extension must be written last. + The signature for this extension is { 'E', 'O', 'I', 'E' }. + + The extension consists of: + + - 32-bit offset to the end of the index entries + + - 160-bit SHA-1 over the extension types and their sizes (but not + their contents). E.g. if we have "TREE" extension that is N-bytes + long, "REUC" extension that is M-bytes long, followed by "EOIE", + then the hash would be: + + SHA-1("TREE" + <binary representation of N> + + "REUC" + <binary representation of M>) + +== Index Entry Offset Table + + The Index Entry Offset Table (IEOT) is used to help address the CPU + cost of loading the index by enabling multi-threading the process of + converting cache entries from the on-disk format to the in-memory format. + The signature for this extension is { 'I', 'E', 'O', 'T' }. + + The extension consists of: + + - 32-bit version (currently 1) + + - A number of index offset entries each consisting of: + + - 32-bit offset from the begining of the file to the first cache entry + in this block of entries. + + - 32-bit count of cache entries in this block diff --git a/Documentation/technical/multi-pack-index.txt b/Documentation/technical/multi-pack-index.txt new file mode 100644 index 0000000000..d7e57639f7 --- /dev/null +++ b/Documentation/technical/multi-pack-index.txt @@ -0,0 +1,109 @@ +Multi-Pack-Index (MIDX) Design Notes +==================================== + +The Git object directory contains a 'pack' directory containing +packfiles (with suffix ".pack") and pack-indexes (with suffix +".idx"). The pack-indexes provide a way to lookup objects and +navigate to their offset within the pack, but these must come +in pairs with the packfiles. This pairing depends on the file +names, as the pack-index differs only in suffix with its pack- +file. While the pack-indexes provide fast lookup per packfile, +this performance degrades as the number of packfiles increases, +because abbreviations need to inspect every packfile and we are +more likely to have a miss on our most-recently-used packfile. +For some large repositories, repacking into a single packfile +is not feasible due to storage space or excessive repack times. + +The multi-pack-index (MIDX for short) stores a list of objects +and their offsets into multiple packfiles. It contains: + +- A list of packfile names. +- A sorted list of object IDs. +- A list of metadata for the ith object ID including: + - A value j referring to the jth packfile. + - An offset within the jth packfile for the object. +- If large offsets are required, we use another list of large + offsets similar to version 2 pack-indexes. + +Thus, we can provide O(log N) lookup time for any number +of packfiles. + +Design Details +-------------- + +- The MIDX is stored in a file named 'multi-pack-index' in the + .git/objects/pack directory. This could be stored in the pack + directory of an alternate. It refers only to packfiles in that + same directory. + +- The pack.multiIndex config setting must be on to consume MIDX files. + +- The file format includes parameters for the object ID hash + function, so a future change of hash algorithm does not require + a change in format. + +- The MIDX keeps only one record per object ID. If an object appears + in multiple packfiles, then the MIDX selects the copy in the most- + recently modified packfile. + +- If there exist packfiles in the pack directory not registered in + the MIDX, then those packfiles are loaded into the `packed_git` + list and `packed_git_mru` cache. + +- The pack-indexes (.idx files) remain in the pack directory so we + can delete the MIDX file, set core.midx to false, or downgrade + without any loss of information. + +- The MIDX file format uses a chunk-based approach (similar to the + commit-graph file) that allows optional data to be added. + +Future Work +----------- + +- Add a 'verify' subcommand to the 'git midx' builtin to verify the + contents of the multi-pack-index file match the offsets listed in + the corresponding pack-indexes. + +- The multi-pack-index allows many packfiles, especially in a context + where repacking is expensive (such as a very large repo), or + unexpected maintenance time is unacceptable (such as a high-demand + build machine). However, the multi-pack-index needs to be rewritten + in full every time. We can extend the format to be incremental, so + writes are fast. By storing a small "tip" multi-pack-index that + points to large "base" MIDX files, we can keep writes fast while + still reducing the number of binary searches required for object + lookups. + +- The reachability bitmap is currently paired directly with a single + packfile, using the pack-order as the object order to hopefully + compress the bitmaps well using run-length encoding. This could be + extended to pair a reachability bitmap with a multi-pack-index. If + the multi-pack-index is extended to store a "stable object order" + (a function Order(hash) = integer that is constant for a given hash, + even as the multi-pack-index is updated) then a reachability bitmap + could point to a multi-pack-index and be updated independently. + +- Packfiles can be marked as "special" using empty files that share + the initial name but replace ".pack" with ".keep" or ".promisor". + We can add an optional chunk of data to the multi-pack-index that + records flags of information about the packfiles. This allows new + states, such as 'repacked' or 'redeltified', that can help with + pack maintenance in a multi-pack environment. It may also be + helpful to organize packfiles by object type (commit, tree, blob, + etc.) and use this metadata to help that maintenance. + +- The partial clone feature records special "promisor" packs that + may point to objects that are not stored locally, but available + on request to a server. The multi-pack-index does not currently + track these promisor packs. + +Related Links +------------- +[0] https://bugs.chromium.org/p/git/issues/detail?id=6 + Chromium work item for: Multi-Pack Index (MIDX) + +[1] https://public-inbox.org/git/20180107181459.222909-1-dstolee@microsoft.com/ + An earlier RFC for the multi-pack-index feature + +[2] https://public-inbox.org/git/alpine.DEB.2.20.1803091557510.23109@alexmv-linux/ + Git Merge 2018 Contributor's summit notes (includes discussion of MIDX) diff --git a/Documentation/technical/pack-format.txt b/Documentation/technical/pack-format.txt index 70a99fd142..cab5bdd2ff 100644 --- a/Documentation/technical/pack-format.txt +++ b/Documentation/technical/pack-format.txt @@ -252,3 +252,80 @@ Pack file entry: <+ corresponding packfile. 20-byte SHA-1-checksum of all of the above. + +== multi-pack-index (MIDX) files have the following format: + +The multi-pack-index files refer to multiple pack-files and loose objects. + +In order to allow extensions that add extra data to the MIDX, we organize +the body into "chunks" and provide a lookup table at the beginning of the +body. The header includes certain length values, such as the number of packs, +the number of base MIDX files, hash lengths and types. + +All 4-byte numbers are in network order. + +HEADER: + + 4-byte signature: + The signature is: {'M', 'I', 'D', 'X'} + + 1-byte version number: + Git only writes or recognizes version 1. + + 1-byte Object Id Version + Git only writes or recognizes version 1 (SHA1). + + 1-byte number of "chunks" + + 1-byte number of base multi-pack-index files: + This value is currently always zero. + + 4-byte number of pack files + +CHUNK LOOKUP: + + (C + 1) * 12 bytes providing the chunk offsets: + First 4 bytes describe chunk id. Value 0 is a terminating label. + Other 8 bytes provide offset in current file for chunk to start. + (Chunks are provided in file-order, so you can infer the length + using the next chunk position if necessary.) + + The remaining data in the body is described one chunk at a time, and + these chunks may be given in any order. Chunks are required unless + otherwise specified. + +CHUNK DATA: + + Packfile Names (ID: {'P', 'N', 'A', 'M'}) + Stores the packfile names as concatenated, null-terminated strings. + Packfiles must be listed in lexicographic order for fast lookups by + name. This is the only chunk not guaranteed to be a multiple of four + bytes in length, so should be the last chunk for alignment reasons. + + OID Fanout (ID: {'O', 'I', 'D', 'F'}) + The ith entry, F[i], stores the number of OIDs with first + byte at most i. Thus F[255] stores the total + number of objects. + + OID Lookup (ID: {'O', 'I', 'D', 'L'}) + The OIDs for all objects in the MIDX are stored in lexicographic + order in this chunk. + + Object Offsets (ID: {'O', 'O', 'F', 'F'}) + Stores two 4-byte values for every object. + 1: The pack-int-id for the pack storing this object. + 2: The offset within the pack. + If all offsets are less than 2^31, then the large offset chunk + will not exist and offsets are stored as in IDX v1. + If there is at least one offset value larger than 2^32-1, then + the large offset chunk must exist. If the large offset chunk + exists and the 31st bit is on, then removing that bit reveals + the row in the large offsets containing the 8-byte offset of + this object. + + [Optional] Object Large Offsets (ID: {'L', 'O', 'F', 'F'}) + 8-byte offsets into large packfiles. + +TRAILER: + + 20-byte SHA1-checksum of the above contents. diff --git a/Documentation/technical/repository-version.txt b/Documentation/technical/repository-version.txt index e03eaccebc..7844ef30ff 100644 --- a/Documentation/technical/repository-version.txt +++ b/Documentation/technical/repository-version.txt @@ -1,5 +1,4 @@ -Git Repository Format Versions -============================== +== Git Repository Format Versions Every git repository is marked with a numeric version in the `core.repositoryformatversion` key of its `config` file. This version @@ -40,16 +39,14 @@ format by default. The currently defined format versions are: -Version `0` ------------ +=== Version `0` This is the format defined by the initial version of git, including but not limited to the format of the repository directory, the repository configuration file, and the object and ref storage. Specifying the complete behavior of git is beyond the scope of this document. -Version `1` ------------ +=== Version `1` This format is identical to version `0`, with the following exceptions: @@ -74,21 +71,18 @@ it here, in order to claim the name. The defined extensions are: -`noop` -~~~~~~ +==== `noop` This extension does not change git's behavior at all. It is useful only for testing format-1 compatibility. -`preciousObjects` -~~~~~~~~~~~~~~~~~ +==== `preciousObjects` When the config key `extensions.preciousObjects` is set to `true`, objects in the repository MUST NOT be deleted (e.g., by `git-prune` or `git repack -d`). -`partialclone` -~~~~~~~~~~~~~~ +==== `partialclone` When the config key `extensions.partialclone` is set, it indicates that the repo was created with a partial clone (or later performed @@ -98,3 +92,11 @@ and it promises that all such omitted objects can be fetched from it in the future. The value of this key is the name of the promisor remote. + +==== `worktreeConfig` + +If set, by default "git config" reads from both "config" and +"config.worktree" file from GIT_DIR in that order. In +multiple working directory mode, "config" file is shared while +"config.worktree" is per-working directory (i.e., it's in +GIT_COMMON_DIR/worktrees/<id>/config.worktree) diff --git a/Documentation/technical/rerere.txt b/Documentation/technical/rerere.txt new file mode 100644 index 0000000000..aa22d7ace8 --- /dev/null +++ b/Documentation/technical/rerere.txt @@ -0,0 +1,186 @@ +Rerere +====== + +This document describes the rerere logic. + +Conflict normalization +---------------------- + +To ensure recorded conflict resolutions can be looked up in the rerere +database, even when branches are merged in a different order, +different branches are merged that result in the same conflict, or +when different conflict style settings are used, rerere normalizes the +conflicts before writing them to the rerere database. + +Different conflict styles and branch names are normalized by stripping +the labels from the conflict markers, and removing the common ancestor +version from the `diff3` conflict style. Branches that are merged +in different order are normalized by sorting the conflict hunks. More +on each of those steps in the following sections. + +Once these two normalization operations are applied, a conflict ID is +calculated based on the normalized conflict, which is later used by +rerere to look up the conflict in the rerere database. + +Removing the common ancestor version +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Say we have three branches AB, AC and AC2. The common ancestor of +these branches has a file with a line containing the string "A" (for +brevity this is called "line A" in the rest of the document). In +branch AB this line is changed to "B", in AC, this line is changed to +"C", and branch AC2 is forked off of AC, after the line was changed to +"C". + +Forking a branch ABAC off of branch AB and then merging AC into it, we +get a conflict like the following: + + <<<<<<< HEAD + B + ======= + C + >>>>>>> AC + +Doing the analogous with AC2 (forking a branch ABAC2 off of branch AB +and then merging branch AC2 into it), using the diff3 conflict style, +we get a conflict like the following: + + <<<<<<< HEAD + B + ||||||| merged common ancestors + A + ======= + C + >>>>>>> AC2 + +By resolving this conflict, to leave line D, the user declares: + + After examining what branches AB and AC did, I believe that making + line A into line D is the best thing to do that is compatible with + what AB and AC wanted to do. + +As branch AC2 refers to the same commit as AC, the above implies that +this is also compatible what AB and AC2 wanted to do. + +By extension, this means that rerere should recognize that the above +conflicts are the same. To do this, the labels on the conflict +markers are stripped, and the common ancestor version is removed. The above +examples would both result in the following normalized conflict: + + <<<<<<< + B + ======= + C + >>>>>>> + +Sorting hunks +~~~~~~~~~~~~~ + +As before, lets imagine that a common ancestor had a file with line A +its early part, and line X in its late part. And then four branches +are forked that do these things: + + - AB: changes A to B + - AC: changes A to C + - XY: changes X to Y + - XZ: changes X to Z + +Now, forking a branch ABAC off of branch AB and then merging AC into +it, and forking a branch ACAB off of branch AC and then merging AB +into it, would yield the conflict in a different order. The former +would say "A became B or C, what now?" while the latter would say "A +became C or B, what now?" + +As a reminder, the act of merging AC into ABAC and resolving the +conflict to leave line D means that the user declares: + + After examining what branches AB and AC did, I believe that + making line A into line D is the best thing to do that is + compatible with what AB and AC wanted to do. + +So the conflict we would see when merging AB into ACAB should be +resolved the same way---it is the resolution that is in line with that +declaration. + +Imagine that similarly previously a branch XYXZ was forked from XY, +and XZ was merged into it, and resolved "X became Y or Z" into "X +became W". + +Now, if a branch ABXY was forked from AB and then merged XY, then ABXY +would have line B in its early part and line Y in its later part. +Such a merge would be quite clean. We can construct 4 combinations +using these four branches ((AB, AC) x (XY, XZ)). + +Merging ABXY and ACXZ would make "an early A became B or C, a late X +became Y or Z" conflict, while merging ACXY and ABXZ would make "an +early A became C or B, a late X became Y or Z". We can see there are +4 combinations of ("B or C", "C or B") x ("X or Y", "Y or X"). + +By sorting, the conflict is given its canonical name, namely, "an +early part became B or C, a late part becames X or Y", and whenever +any of these four patterns appear, and we can get to the same conflict +and resolution that we saw earlier. + +Without the sorting, we'd have to somehow find a previous resolution +from combinatorial explosion. + +Conflict ID calculation +~~~~~~~~~~~~~~~~~~~~~~~ + +Once the conflict normalization is done, the conflict ID is calculated +as the sha1 hash of the conflict hunks appended to each other, +separated by <NUL> characters. The conflict markers are stripped out +before the sha1 is calculated. So in the example above, where we +merge branch AC which changes line A to line C, into branch AB, which +changes line A to line C, the conflict ID would be +SHA1('B<NUL>C<NUL>'). + +If there are multiple conflicts in one file, the sha1 is calculated +the same way with all hunks appended to each other, in the order in +which they appear in the file, separated by a <NUL> character. + +Nested conflicts +~~~~~~~~~~~~~~~~ + +Nested conflicts are handled very similarly to "simple" conflicts. +Similar to simple conflicts, the conflict is first normalized by +stripping the labels from conflict markers, stripping the common ancestor +version, and the sorting the conflict hunks, both for the outer and the +inner conflict. This is done recursively, so any number of nested +conflicts can be handled. + +Note that this only works for conflict markers that "cleanly nest". If +there are any unmatched conflict markers, rerere will fail to handle +the conflict and record a conflict resolution. + +The only difference is in how the conflict ID is calculated. For the +inner conflict, the conflict markers themselves are not stripped out +before calculating the sha1. + +Say we have the following conflict for example: + + <<<<<<< HEAD + 1 + ======= + <<<<<<< HEAD + 3 + ======= + 2 + >>>>>>> branch-2 + >>>>>>> branch-3~ + +After stripping out the labels of the conflict markers, and sorting +the hunks, the conflict would look as follows: + + <<<<<<< + 1 + ======= + <<<<<<< + 2 + ======= + 3 + >>>>>>> + >>>>>>> + +and finally the conflict ID would be calculated as: +`sha1('1<NUL><<<<<<<\n3\n=======\n2\n>>>>>>><NUL>')` |