diff options
Diffstat (limited to 'Documentation/technical/pack-protocol.txt')
| -rw-r--r-- | Documentation/technical/pack-protocol.txt | 129 |
1 files changed, 103 insertions, 26 deletions
diff --git a/Documentation/technical/pack-protocol.txt b/Documentation/technical/pack-protocol.txt index a34917153f..e13a2c064d 100644 --- a/Documentation/technical/pack-protocol.txt +++ b/Documentation/technical/pack-protocol.txt @@ -22,6 +22,16 @@ protocol-common.txt. When the grammar indicate `PKT-LINE(...)`, unless otherwise noted the usual pkt-line LF rules apply: the sender SHOULD include a LF, but the receiver MUST NOT complain if it is not present. +An error packet is a special pkt-line that contains an error string. + +---- + error-line = PKT-LINE("ERR" SP explanation-text) +---- + +Throughout the protocol, where `PKT-LINE(...)` is expected, an error packet MAY +be sent. Once this packet is sent by a client or a server, the data transfer +process defined in this protocol is terminated. + Transports ---------- There are three transports over which the packfile protocol is @@ -39,6 +49,20 @@ communicates with that invoked process over the SSH connection. The file:// transport runs the 'upload-pack' or 'receive-pack' process locally and communicates with it over a pipe. +Extra Parameters +---------------- + +The protocol provides a mechanism in which clients can send additional +information in its first message to the server. These are called "Extra +Parameters", and are supported by the Git, SSH, and HTTP protocols. + +Each Extra Parameter takes the form of `<key>=<value>` or `<key>`. + +Servers that receive any such Extra Parameters MUST ignore all +unrecognized keys. Currently, the only Extra Parameter recognized is +"version" with a value of '1' or '2'. See protocol-v2.txt for more +information on protocol version 2. + Git Transport ------------- @@ -46,18 +70,25 @@ The Git transport starts off by sending the command and repository on the wire using the pkt-line format, followed by a NUL byte and a hostname parameter, terminated by a NUL byte. - 0032git-upload-pack /project.git\0host=myserver.com\0 + 0033git-upload-pack /project.git\0host=myserver.com\0 + +The transport may send Extra Parameters by adding an additional NUL +byte, and then adding one or more NUL-terminated strings: + + 003egit-upload-pack /project.git\0host=myserver.com\0\0version=1\0 -- - git-proto-request = request-command SP pathname NUL [ host-parameter NUL ] + git-proto-request = request-command SP pathname NUL + [ host-parameter NUL ] [ NUL extra-parameters ] request-command = "git-upload-pack" / "git-receive-pack" / "git-upload-archive" ; case sensitive pathname = *( %x01-ff ) ; exclude NUL host-parameter = "host=" hostname [ ":" port ] + extra-parameters = 1*extra-parameter + extra-parameter = 1*( %x01-ff ) NUL -- -Only host-parameter is allowed in the git-proto-request. Clients -MUST NOT attempt to send additional parameters. It is used for the +host-parameter is used for the git-daemon name based virtual hosting. See --interpolated-path option to git daemon, with the %H/%CH format characters. @@ -65,16 +96,9 @@ Basically what the Git client is doing to connect to an 'upload-pack' process on the server side over the Git protocol is this: $ echo -e -n \ - "0039git-upload-pack /schacon/gitbook.git\0host=example.com\0" | + "003agit-upload-pack /schacon/gitbook.git\0host=example.com\0" | nc -v example.com 9418 -If the server refuses the request for some reasons, it could abort -gracefully with an error message. - ----- - error-line = PKT-LINE("ERR" SP explanation-text) ----- - SSH Transport ------------- @@ -117,6 +141,12 @@ we execute it without the leading '/'. v ssh user@example.com "git-upload-pack '~alice/project.git'" +Depending on the value of the `protocol.version` configuration variable, +Git may attempt to send Extra Parameters as a colon-separated string in +the GIT_PROTOCOL environment variable. This is done only if +the `ssh.variant` configuration variable indicates that the ssh command +supports passing environment variables as an argument. + A few things to remember here: - The "command name" is spelled with dash (e.g. git-upload-pack), but @@ -137,11 +167,13 @@ Reference Discovery ------------------- When the client initially connects the server will immediately respond -with a listing of each reference it has (all branches and tags) along +with a version number (if "version=1" is sent as an Extra Parameter), +and a listing of each reference it has (all branches and tags) along with the object name that each reference currently points to. - $ echo -e -n "0039git-upload-pack /schacon/gitbook.git\0host=example.com\0" | + $ echo -e -n "0045git-upload-pack /schacon/gitbook.git\0host=example.com\0\0version=1\0" | nc -v example.com 9418 + 000eversion 1 00887217a7c7e582c46cec22a130adf4b9d7d950fba0 HEAD\0multi_ack thin-pack side-band side-band-64k ofs-delta shallow no-progress include-tag 00441d3fcd5ced445d1abc402225c0b8a1299641f497 refs/heads/integration @@ -165,7 +197,8 @@ immediately after the ref itself, if presented. A conforming server MUST peel the ref if it's an annotated tag. ---- - advertised-refs = (no-refs / list-of-refs) + advertised-refs = *1("version 1") + (no-refs / list-of-refs) *shallow flush-pkt @@ -199,7 +232,7 @@ After reference and capabilities discovery, the client can decide to terminate the connection by sending a flush-pkt, telling the server it can now gracefully terminate, and disconnect, when it does not need any pack data. This can happen with the ls-remote command, and also can happen when -the client already is up-to-date. +the client already is up to date. Otherwise, it enters the negotiation phase, where the client and server determine what the minimal packfile necessary for transport is, @@ -212,6 +245,7 @@ out of what the server said it could do with the first 'want' line. upload-request = want-list *shallow-line *1depth-request + [filter-request] flush-pkt want-list = first-want @@ -227,6 +261,8 @@ out of what the server said it could do with the first 'want' line. additional-want = PKT-LINE("want" SP obj-id) depth = 1*DIGIT + + filter-request = PKT-LINE("filter" SP filter-spec) ---- Clients MUST send all the obj-ids it wants from the reference @@ -249,6 +285,13 @@ complete those commits. Commits whose parents are not received as a result are defined as shallow and marked as such in the server. This information is sent back to the client in the next step. +The client can optionally request that pack-objects omit various +objects from the packfile using one of several filtering techniques. +These are intended for use with partial clone and partial fetch +operations. An object that does not meet a filter-spec value is +omitted unless explicitly requested in a 'want' line. See `rev-list` +for possible filter-spec values. + Once all the 'want's and 'shallow's (and optional 'deepen') are transferred, clients MUST send a flush-pkt, to tell the server side that it is done sending the list. @@ -358,12 +401,11 @@ from the client). Then the server will start sending its packfile data. ---- - server-response = *ack_multi ack / nak / error-line + server-response = *ack_multi ack / nak ack_multi = PKT-LINE("ACK" SP obj-id ack_status) ack_status = "continue" / "common" / "ready" ack = PKT-LINE("ACK" SP obj-id) nak = PKT-LINE("NAK") - error-line = PKT-LINE("ERR" SP explanation-text) ---- A simple clone may look like this (with no 'have' lines): @@ -461,8 +503,8 @@ The reference discovery phase is done nearly the same way as it is in the fetching protocol. Each reference obj-id and name on the server is sent in packet-line format to the client, followed by a flush-pkt. The only real difference is that the capability listing is different - the only -possible values are 'report-status', 'delete-refs', 'ofs-delta' and -'push-options'. +possible values are 'report-status', 'report-status-v2', 'delete-refs', +'ofs-delta', 'atomic' and 'push-options'. Reference Update Request and Packfile Transfer ---------------------------------------------- @@ -583,7 +625,7 @@ Report Status ------------- After receiving the pack data from the sender, the receiver sends a -report if 'report-status' capability is in effect. +report if 'report-status' or 'report-status-v2' capability is in effect. It is a short listing of what happened in that update. It will first list the status of the packfile unpacking as either 'unpack ok' or 'unpack [error]'. Then it will list the status for each of the references @@ -602,7 +644,42 @@ update was successful, or 'ng [refname] [error]' if the update was not. command-ok = PKT-LINE("ok" SP refname) command-fail = PKT-LINE("ng" SP refname SP error-msg) - error-msg = 1*(OCTECT) ; where not "ok" + error-msg = 1*(OCTET) ; where not "ok" +---- + +The 'report-status-v2' capability extends the protocol by adding new option +lines in order to support reporting of reference rewritten by the +'proc-receive' hook. The 'proc-receive' hook may handle a command for a +pseudo-reference which may create or update one or more references, and each +reference may have different name, different new-oid, and different old-oid. + +---- + report-status-v2 = unpack-status + 1*(command-status-v2) + flush-pkt + + unpack-status = PKT-LINE("unpack" SP unpack-result) + unpack-result = "ok" / error-msg + + command-status-v2 = command-ok-v2 / command-fail + command-ok-v2 = command-ok + *option-line + + command-ok = PKT-LINE("ok" SP refname) + command-fail = PKT-LINE("ng" SP refname SP error-msg) + + error-msg = 1*(OCTET) ; where not "ok" + + option-line = *1(option-refname) + *1(option-old-oid) + *1(option-new-oid) + *1(option-forced-update) + + option-refname = PKT-LINE("option" SP "refname" SP refname) + option-old-oid = PKT-LINE("option" SP "old-oid" SP obj-id) + option-new-oid = PKT-LINE("option" SP "new-oid" SP obj-id) + option-force = PKT-LINE("option" SP "forced-update") + ---- Updates can be unsuccessful for a number of reasons. The reference can have @@ -615,14 +692,14 @@ can be rejected. An example client/server communication might look like this: ---- - S: 007c74730d410fcb6603ace96f1dc55ea6196122532d refs/heads/local\0report-status delete-refs ofs-delta\n + S: 006274730d410fcb6603ace96f1dc55ea6196122532d refs/heads/local\0report-status delete-refs ofs-delta\n S: 003e7d1665144a3a975c05f1f43902ddaf084e784dbe refs/heads/debug\n S: 003f74730d410fcb6603ace96f1dc55ea6196122532d refs/heads/master\n - S: 003f74730d410fcb6603ace96f1dc55ea6196122532d refs/heads/team\n + S: 003d74730d410fcb6603ace96f1dc55ea6196122532d refs/heads/team\n S: 0000 - C: 003e7d1665144a3a975c05f1f43902ddaf084e784dbe 74730d410fcb6603ace96f1dc55ea6196122532d refs/heads/debug\n - C: 003e74730d410fcb6603ace96f1dc55ea6196122532d 5a3f6be755bbb7deae50065988cbfa1ffa9ab68a refs/heads/master\n + C: 00677d1665144a3a975c05f1f43902ddaf084e784dbe 74730d410fcb6603ace96f1dc55ea6196122532d refs/heads/debug\n + C: 006874730d410fcb6603ace96f1dc55ea6196122532d 5a3f6be755bbb7deae50065988cbfa1ffa9ab68a refs/heads/master\n C: 0000 C: [PACKDATA] |