diff options
Diffstat (limited to 'Documentation/technical/pack-protocol.txt')
| -rw-r--r-- | Documentation/technical/pack-protocol.txt | 93 |
1 files changed, 64 insertions, 29 deletions
diff --git a/Documentation/technical/pack-protocol.txt b/Documentation/technical/pack-protocol.txt index 4064fc796f..a34917153f 100644 --- a/Documentation/technical/pack-protocol.txt +++ b/Documentation/technical/pack-protocol.txt @@ -14,6 +14,14 @@ data. The protocol functions to have a server tell a client what is currently on the server, then for the two to negotiate the smallest amount of data to send in order to fully update one or the other. +pkt-line Format +--------------- + +The descriptions below build on the pkt-line format described in +protocol-common.txt. When the grammar indicate `PKT-LINE(...)`, unless +otherwise noted the usual pkt-line LF rules apply: the sender SHOULD +include a LF, but the receiver MUST NOT complain if it is not present. + Transports ---------- There are three transports over which the packfile protocol is @@ -143,9 +151,6 @@ with the object name that each reference currently points to. 003fe92df48743b7bc7d26bcaabfddde0a1e20cae47c refs/tags/v1.0^{} 0000 -Server SHOULD terminate each non-flush line using LF ("\n") terminator; -client MUST NOT complain if there is no terminator. - The returned response is a pkt-line stream describing each ref and its current value. The stream MUST be sorted by name according to the C locale ordering. @@ -165,15 +170,15 @@ MUST peel the ref if it's an annotated tag. flush-pkt no-refs = PKT-LINE(zero-id SP "capabilities^{}" - NUL capability-list LF) + NUL capability-list) list-of-refs = first-ref *other-ref first-ref = PKT-LINE(obj-id SP refname - NUL capability-list LF) + NUL capability-list) other-ref = PKT-LINE(other-tip / other-peeled) - other-tip = obj-id SP refname LF - other-peeled = obj-id SP refname "^{}" LF + other-tip = obj-id SP refname + other-peeled = obj-id SP refname "^{}" shallow = PKT-LINE("shallow" SP obj-id) @@ -214,10 +219,12 @@ out of what the server said it could do with the first 'want' line. shallow-line = PKT-LINE("shallow" SP obj-id) - depth-request = PKT-LINE("deepen" SP depth) + depth-request = PKT-LINE("deepen" SP depth) / + PKT-LINE("deepen-since" SP timestamp) / + PKT-LINE("deepen-not" SP ref) - first-want = PKT-LINE("want" SP obj-id SP capability-list LF) - additional-want = PKT-LINE("want" SP obj-id LF) + first-want = PKT-LINE("want" SP obj-id SP capability-list) + additional-want = PKT-LINE("want" SP obj-id) depth = 1*DIGIT ---- @@ -284,7 +291,7 @@ so that there is always a block of 32 "in-flight on the wire" at a time. compute-end have-list = *have-line - have-line = PKT-LINE("have" SP obj-id LF) + have-line = PKT-LINE("have" SP obj-id) compute-end = flush-pkt / PKT-LINE("done") ---- @@ -302,7 +309,7 @@ In multi_ack mode: ready to make a packfile, it will blindly ACK all 'have' obj-ids back to the client. - * the server will then send a 'NACK' and then wait for another response + * the server will then send a 'NAK' and then wait for another response from the client - either a 'done' or another list of 'have' lines. In multi_ack_detailed mode: @@ -344,14 +351,19 @@ ACK after 'done' if there is at least one common base and multi_ack or multi_ack_detailed is enabled. The server always sends NAK after 'done' if there is no common base found. +Instead of 'ACK' or 'NAK', the server may send an error message (for +example, if it does not recognize an object in a 'want' line received +from the client). + Then the server will start sending its packfile data. ---- - server-response = *ack_multi ack / nak - ack_multi = PKT-LINE("ACK" SP obj-id ack_status LF) + server-response = *ack_multi ack / nak / error-line + ack_multi = PKT-LINE("ACK" SP obj-id ack_status) ack_status = "continue" / "common" / "ready" - ack = PKT-LINE("ACK SP obj-id LF) - nak = PKT-LINE("NAK" LF) + ack = PKT-LINE("ACK" SP obj-id) + nak = PKT-LINE("NAK") + error-line = PKT-LINE("ERR" SP explanation-text) ---- A simple clone may look like this (with no 'have' lines): @@ -449,7 +461,8 @@ The reference discovery phase is done nearly the same way as it is in the fetching protocol. Each reference obj-id and name on the server is sent in packet-line format to the client, followed by a flush-pkt. The only real difference is that the capability listing is different - the only -possible values are 'report-status', 'delete-refs' and 'ofs-delta'. +possible values are 'report-status', 'delete-refs', 'ofs-delta' and +'push-options'. Reference Update Request and Packfile Transfer ---------------------------------------------- @@ -460,17 +473,15 @@ that it wants to update, it sends a line listing the obj-id currently on the server, the obj-id the client would like to update it to and the name of the reference. -This list is followed by a flush-pkt and then the packfile that should -contain all the objects that the server will need to complete the new -references. +This list is followed by a flush-pkt. ---- - update-request = *shallow ( command-list | push-cert ) [packfile] + update-requests = *shallow ( command-list | push-cert ) - shallow = PKT-LINE("shallow" SP obj-id LF) + shallow = PKT-LINE("shallow" SP obj-id) - command-list = PKT-LINE(command NUL capability-list LF) - *PKT-LINE(command LF) + command-list = PKT-LINE(command NUL capability-list) + *PKT-LINE(command) flush-pkt command = create / delete / update @@ -486,12 +497,35 @@ references. PKT-LINE("pusher" SP ident LF) PKT-LINE("pushee" SP url LF) PKT-LINE("nonce" SP nonce LF) + *PKT-LINE("push-option" SP push-option LF) PKT-LINE(LF) *PKT-LINE(command LF) *PKT-LINE(gpg-signature-lines LF) PKT-LINE("push-cert-end" LF) - packfile = "PACK" 28*(OCTET) + push-option = 1*( VCHAR | SP ) +---- + +If the server has advertised the 'push-options' capability and the client has +specified 'push-options' as part of the capability list above, the client then +sends its push options followed by a flush-pkt. + +---- + push-options = *PKT-LINE(push-option) flush-pkt +---- + +For backwards compatibility with older Git servers, if the client sends a push +cert and push options, it MUST send its push options both embedded within the +push cert and after the push cert. (Note that the push options within the cert +are prefixed, but the push options after the cert are not.) Both these lists +MUST be the same, modulo the prefix. + +After that the packfile that +should contain all the objects that the server will need to complete the new +references will be sent. + +---- + packfile = "PACK" 28*(OCTET) ---- If the receiving end does not support delete-refs, the sending end MUST @@ -521,7 +555,8 @@ Push Certificate A push certificate begins with a set of header lines. After the header and an empty line, the protocol commands follow, one per -line. +line. Note that the trailing LF in push-cert PKT-LINEs is _not_ +optional; it must be present. Currently, the following header fields are defined: @@ -560,12 +595,12 @@ update was successful, or 'ng [refname] [error]' if the update was not. 1*(command-status) flush-pkt - unpack-status = PKT-LINE("unpack" SP unpack-result LF) + unpack-status = PKT-LINE("unpack" SP unpack-result) unpack-result = "ok" / error-msg command-status = command-ok / command-fail - command-ok = PKT-LINE("ok" SP refname LF) - command-fail = PKT-LINE("ng" SP refname SP error-msg LF) + command-ok = PKT-LINE("ok" SP refname) + command-fail = PKT-LINE("ng" SP refname SP error-msg) error-msg = 1*(OCTECT) ; where not "ok" ---- |