summaryrefslogtreecommitdiff
path: root/Documentation/technical/api-credentials.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/technical/api-credentials.txt')
-rw-r--r--Documentation/technical/api-credentials.txt271
1 files changed, 0 insertions, 271 deletions
diff --git a/Documentation/technical/api-credentials.txt b/Documentation/technical/api-credentials.txt
deleted file mode 100644
index 75368f26ca..0000000000
--- a/Documentation/technical/api-credentials.txt
+++ /dev/null
@@ -1,271 +0,0 @@
-credentials API
-===============
-
-The credentials API provides an abstracted way of gathering username and
-password credentials from the user (even though credentials in the wider
-world can take many forms, in this document the word "credential" always
-refers to a username and password pair).
-
-This document describes two interfaces: the C API that the credential
-subsystem provides to the rest of Git, and the protocol that Git uses to
-communicate with system-specific "credential helpers". If you are
-writing Git code that wants to look up or prompt for credentials, see
-the section "C API" below. If you want to write your own helper, see
-the section on "Credential Helpers" below.
-
-Typical setup
--------------
-
-------------
-+-----------------------+
-| Git code (C) |--- to server requiring --->
-| | authentication
-|.......................|
-| C credential API |--- prompt ---> User
-+-----------------------+
- ^ |
- | pipe |
- | v
-+-----------------------+
-| Git credential helper |
-+-----------------------+
-------------
-
-The Git code (typically a remote-helper) will call the C API to obtain
-credential data like a login/password pair (credential_fill). The
-API will itself call a remote helper (e.g. "git credential-cache" or
-"git credential-store") that may retrieve credential data from a
-store. If the credential helper cannot find the information, the C API
-will prompt the user. Then, the caller of the API takes care of
-contacting the server, and does the actual authentication.
-
-C API
------
-
-The credential C API is meant to be called by Git code which needs to
-acquire or store a credential. It is centered around an object
-representing a single credential and provides three basic operations:
-fill (acquire credentials by calling helpers and/or prompting the user),
-approve (mark a credential as successfully used so that it can be stored
-for later use), and reject (mark a credential as unsuccessful so that it
-can be erased from any persistent storage).
-
-Data Structures
-~~~~~~~~~~~~~~~
-
-`struct credential`::
-
- This struct represents a single username/password combination
- along with any associated context. All string fields should be
- heap-allocated (or NULL if they are not known or not applicable).
- The meaning of the individual context fields is the same as
- their counterparts in the helper protocol; see the section below
- for a description of each field.
-+
-The `helpers` member of the struct is a `string_list` of helpers. Each
-string specifies an external helper which will be run, in order, to
-either acquire or store credentials. See the section on credential
-helpers below. This list is filled-in by the API functions
-according to the corresponding configuration variables before
-consulting helpers, so there usually is no need for a caller to
-modify the helpers field at all.
-+
-This struct should always be initialized with `CREDENTIAL_INIT` or
-`credential_init`.
-
-
-Functions
-~~~~~~~~~
-
-`credential_init`::
-
- Initialize a credential structure, setting all fields to empty.
-
-`credential_clear`::
-
- Free any resources associated with the credential structure,
- returning it to a pristine initialized state.
-
-`credential_fill`::
-
- Instruct the credential subsystem to fill the username and
- password fields of the passed credential struct by first
- consulting helpers, then asking the user. After this function
- returns, the username and password fields of the credential are
- guaranteed to be non-NULL. If an error occurs, the function will
- die().
-
-`credential_reject`::
-
- Inform the credential subsystem that the provided credentials
- have been rejected. This will cause the credential subsystem to
- notify any helpers of the rejection (which allows them, for
- example, to purge the invalid credentials from storage). It
- will also free() the username and password fields of the
- credential and set them to NULL (readying the credential for
- another call to `credential_fill`). Any errors from helpers are
- ignored.
-
-`credential_approve`::
-
- Inform the credential subsystem that the provided credentials
- were successfully used for authentication. This will cause the
- credential subsystem to notify any helpers of the approval, so
- that they may store the result to be used again. Any errors
- from helpers are ignored.
-
-`credential_from_url`::
-
- Parse a URL into broken-down credential fields.
-
-Example
-~~~~~~~
-
-The example below shows how the functions of the credential API could be
-used to login to a fictitious "foo" service on a remote host:
-
------------------------------------------------------------------------
-int foo_login(struct foo_connection *f)
-{
- int status;
- /*
- * Create a credential with some context; we don't yet know the
- * username or password.
- */
-
- struct credential c = CREDENTIAL_INIT;
- c.protocol = xstrdup("foo");
- c.host = xstrdup(f->hostname);
-
- /*
- * Fill in the username and password fields by contacting
- * helpers and/or asking the user. The function will die if it
- * fails.
- */
- credential_fill(&c);
-
- /*
- * Otherwise, we have a username and password. Try to use it.
- */
- status = send_foo_login(f, c.username, c.password);
- switch (status) {
- case FOO_OK:
- /* It worked. Store the credential for later use. */
- credential_accept(&c);
- break;
- case FOO_BAD_LOGIN:
- /* Erase the credential from storage so we don't try it
- * again. */
- credential_reject(&c);
- break;
- default:
- /*
- * Some other error occurred. We don't know if the
- * credential is good or bad, so report nothing to the
- * credential subsystem.
- */
- }
-
- /* Free any associated resources. */
- credential_clear(&c);
-
- return status;
-}
------------------------------------------------------------------------
-
-
-Credential Helpers
-------------------
-
-Credential helpers are programs executed by Git to fetch or save
-credentials from and to long-term storage (where "long-term" is simply
-longer than a single Git process; e.g., credentials may be stored
-in-memory for a few minutes, or indefinitely on disk).
-
-Each helper is specified by a single string in the configuration
-variable `credential.helper` (and others, see linkgit:git-config[1]).
-The string is transformed by Git into a command to be executed using
-these rules:
-
- 1. If the helper string begins with "!", it is considered a shell
- snippet, and everything after the "!" becomes the command.
-
- 2. Otherwise, if the helper string begins with an absolute path, the
- verbatim helper string becomes the command.
-
- 3. Otherwise, the string "git credential-" is prepended to the helper
- string, and the result becomes the command.
-
-The resulting command then has an "operation" argument appended to it
-(see below for details), and the result is executed by the shell.
-
-Here are some example specifications:
-
-----------------------------------------------------
-# run "git credential-foo"
-foo
-
-# same as above, but pass an argument to the helper
-foo --bar=baz
-
-# the arguments are parsed by the shell, so use shell
-# quoting if necessary
-foo --bar="whitespace arg"
-
-# you can also use an absolute path, which will not use the git wrapper
-/path/to/my/helper --with-arguments
-
-# or you can specify your own shell snippet
-!f() { echo "password=`cat $HOME/.secret`"; }; f
-----------------------------------------------------
-
-Generally speaking, rule (3) above is the simplest for users to specify.
-Authors of credential helpers should make an effort to assist their
-users by naming their program "git-credential-$NAME", and putting it in
-the $PATH or $GIT_EXEC_PATH during installation, which will allow a user
-to enable it with `git config credential.helper $NAME`.
-
-When a helper is executed, it will have one "operation" argument
-appended to its command line, which is one of:
-
-`get`::
-
- Return a matching credential, if any exists.
-
-`store`::
-
- Store the credential, if applicable to the helper.
-
-`erase`::
-
- Remove a matching credential, if any, from the helper's storage.
-
-The details of the credential will be provided on the helper's stdin
-stream. The exact format is the same as the input/output format of the
-`git credential` plumbing command (see the section `INPUT/OUTPUT
-FORMAT` in linkgit:git-credential[1] for a detailed specification).
-
-For a `get` operation, the helper should produce a list of attributes
-on stdout in the same format. A helper is free to produce a subset, or
-even no values at all if it has nothing useful to provide. Any provided
-attributes will overwrite those already known about by Git. If a helper
-outputs a `quit` attribute with a value of `true` or `1`, no further
-helpers will be consulted, nor will the user be prompted (if no
-credential has been provided, the operation will then fail).
-
-For a `store` or `erase` operation, the helper's output is ignored.
-If it fails to perform the requested operation, it may complain to
-stderr to inform the user. If it does not support the requested
-operation (e.g., a read-only store), it should silently ignore the
-request.
-
-If a helper receives any other operation, it should silently ignore the
-request. This leaves room for future operations to be added (older
-helpers will just ignore the new requests).
-
-See also
---------
-
-linkgit:gitcredentials[7]
-
-linkgit:git-config[1] (See configuration variables `credential.*`)