diff options
Diffstat (limited to 'Documentation/rev-list-options.txt')
| -rw-r--r-- | Documentation/rev-list-options.txt | 668 |
1 files changed, 668 insertions, 0 deletions
diff --git a/Documentation/rev-list-options.txt b/Documentation/rev-list-options.txt new file mode 100644 index 0000000000..3ef71179d9 --- /dev/null +++ b/Documentation/rev-list-options.txt @@ -0,0 +1,668 @@ +Commit Formatting +~~~~~~~~~~~~~~~~~ + +ifdef::git-rev-list[] +Using these options, linkgit:git-rev-list[1] will act similar to the +more specialized family of commit log tools: linkgit:git-log[1], +linkgit:git-show[1], and linkgit:git-whatchanged[1] +endif::git-rev-list[] + +include::pretty-options.txt[] + +--relative-date:: + + Synonym for `--date=relative`. + +--date={relative,local,default,iso,rfc,short,raw}:: + + Only takes effect for dates shown in human-readable format, such + as when using "--pretty". `log.date` config variable sets a default + value for log command's --date option. ++ +`--date=relative` shows dates relative to the current time, +e.g. "2 hours ago". ++ +`--date=local` shows timestamps in user's local timezone. ++ +`--date=iso` (or `--date=iso8601`) shows timestamps in ISO 8601 format. ++ +`--date=rfc` (or `--date=rfc2822`) shows timestamps in RFC 2822 +format, often found in E-mail messages. ++ +`--date=short` shows only date but not time, in `YYYY-MM-DD` format. ++ +`--date=raw` shows the date in the internal raw git format `%s %z` format. ++ +`--date=default` shows timestamps in the original timezone +(either committer's or author's). + +ifdef::git-rev-list[] +--header:: + + Print the contents of the commit in raw-format; each record is + separated with a NUL character. +endif::git-rev-list[] + +--parents:: + + Print the parents of the commit. Also enables parent + rewriting, see 'History Simplification' below. + +--children:: + + Print the children of the commit. Also enables parent + rewriting, see 'History Simplification' below. + +ifdef::git-rev-list[] +--timestamp:: + Print the raw commit timestamp. +endif::git-rev-list[] + +--left-right:: + + Mark which side of a symmetric diff a commit is reachable from. + Commits from the left side are prefixed with `<` and those from + the right with `>`. If combined with `--boundary`, those + commits are prefixed with `-`. ++ +For example, if you have this topology: ++ +----------------------------------------------------------------------- + y---b---b branch B + / \ / + / . + / / \ + o---x---a---a branch A +----------------------------------------------------------------------- ++ +you would get an output like this: ++ +----------------------------------------------------------------------- + $ git rev-list --left-right --boundary --pretty=oneline A...B + + >bbbbbbb... 3rd on b + >bbbbbbb... 2nd on b + <aaaaaaa... 3rd on a + <aaaaaaa... 2nd on a + -yyyyyyy... 1st on b + -xxxxxxx... 1st on a +----------------------------------------------------------------------- + +--graph:: + + Draw a text-based graphical representation of the commit history + on the left hand side of the output. This may cause extra lines + to be printed in between commits, in order for the graph history + to be drawn properly. ++ +This implies the '--topo-order' option by default, but the +'--date-order' option may also be specified. + +ifndef::git-rev-list[] +Diff Formatting +~~~~~~~~~~~~~~~ + +Below are listed options that control the formatting of diff output. +Some of them are specific to linkgit:git-rev-list[1], however other diff +options may be given. See linkgit:git-diff-files[1] for more options. + +-c:: + + This flag changes the way a merge commit is displayed. It shows + the differences from each of the parents to the merge result + simultaneously instead of showing pairwise diff between a parent + and the result one at a time. Furthermore, it lists only files + which were modified from all parents. + +--cc:: + + This flag implies the '-c' options and further compresses the + patch output by omitting uninteresting hunks whose contents in + the parents have only two variants and the merge result picks + one of them without modification. + +-r:: + + Show recursive diffs. + +-t:: + + Show the tree objects in the diff output. This implies '-r'. +endif::git-rev-list[] + +Commit Limiting +~~~~~~~~~~~~~~~ + +Besides specifying a range of commits that should be listed using the +special notations explained in the description, additional commit +limiting may be applied. + +-- + +-n 'number':: +--max-count=<number>:: + + Limit the number of commits output. + +--skip=<number>:: + + Skip 'number' commits before starting to show the commit output. + +--since=<date>:: +--after=<date>:: + + Show commits more recent than a specific date. + +--until=<date>:: +--before=<date>:: + + Show commits older than a specific date. + +ifdef::git-rev-list[] +--max-age=<timestamp>:: +--min-age=<timestamp>:: + + Limit the commits output to specified time range. +endif::git-rev-list[] + +--author=<pattern>:: +--committer=<pattern>:: + + Limit the commits output to ones with author/committer + header lines that match the specified pattern (regular expression). + +--grep=<pattern>:: + + Limit the commits output to ones with log message that + matches the specified pattern (regular expression). + +--all-match:: + Limit the commits output to ones that match all given --grep, + --author and --committer instead of ones that match at least one. + +-i:: +--regexp-ignore-case:: + + Match the regexp limiting patterns without regard to letters case. + +-E:: +--extended-regexp:: + + Consider the limiting patterns to be extended regular expressions + instead of the default basic regular expressions. + +-F:: +--fixed-strings:: + + Consider the limiting patterns to be fixed strings (don't interpret + pattern as a regular expression). + +--remove-empty:: + + Stop when a given path disappears from the tree. + +--merges:: + + Print only merge commits. + +--no-merges:: + + Do not print commits with more than one parent. + +--first-parent:: + Follow only the first parent commit upon seeing a merge + commit. This option can give a better overview when + viewing the evolution of a particular topic branch, + because merges into a topic branch tend to be only about + adjusting to updated upstream from time to time, and + this option allows you to ignore the individual commits + brought in to your history by such a merge. + +--not:: + + Reverses the meaning of the '{caret}' prefix (or lack thereof) + for all following revision specifiers, up to the next '--not'. + +--all:: + + Pretend as if all the refs in `$GIT_DIR/refs/` are listed on the + command line as '<commit>'. + +--branches[=pattern]:: + + Pretend as if all the refs in `$GIT_DIR/refs/heads` are listed + on the command line as '<commit>'. If `pattern` is given, limit + branches to ones matching given shell glob. If pattern lacks '?', + '*', or '[', '/*' at the end is impiled. + +--tags[=pattern]:: + + Pretend as if all the refs in `$GIT_DIR/refs/tags` are listed + on the command line as '<commit>'. If `pattern` is given, limit + tags to ones matching given shell glob. If pattern lacks '?', '*', + or '[', '/*' at the end is impiled. + +--remotes[=pattern]:: + + Pretend as if all the refs in `$GIT_DIR/refs/remotes` are listed + on the command line as '<commit>'. If `pattern`is given, limit + remote tracking branches to ones matching given shell glob. + If pattern lacks '?', '*', or '[', '/*' at the end is impiled. + +--glob=glob-pattern:: + Pretend as if all the refs matching shell glob `glob-pattern` + are listed on the command line as '<commit>'. Leading 'refs/', + is automatically prepended if missing. If pattern lacks '?', '*', + or '[', '/*' at the end is impiled. + + +ifndef::git-rev-list[] +--bisect:: + + Pretend as if the bad bisection ref `$GIT_DIR/refs/bisect/bad` + was listed and as if it was followed by `--not` and the good + bisection refs `$GIT_DIR/refs/bisect/good-*` on the command + line. +endif::git-rev-list[] + +--stdin:: + + In addition to the '<commit>' listed on the command + line, read them from the standard input. If a '--' separator is + seen, stop reading commits and start reading paths to limit the + result. + +ifdef::git-rev-list[] +--quiet:: + + Don't print anything to standard output. This form + is primarily meant to allow the caller to + test the exit status to see if a range of objects is fully + connected (or not). It is faster than redirecting stdout + to /dev/null as the output does not have to be formatted. +endif::git-rev-list[] + +--cherry-pick:: + + Omit any commit that introduces the same change as + another commit on the "other side" when the set of + commits are limited with symmetric difference. ++ +For example, if you have two branches, `A` and `B`, a usual way +to list all commits on only one side of them is with +`--left-right`, like the example above in the description of +that option. It however shows the commits that were cherry-picked +from the other branch (for example, "3rd on b" may be cherry-picked +from branch A). With this option, such pairs of commits are +excluded from the output. + +-g:: +--walk-reflogs:: + + Instead of walking the commit ancestry chain, walk + reflog entries from the most recent one to older ones. + When this option is used you cannot specify commits to + exclude (that is, '{caret}commit', 'commit1..commit2', + nor 'commit1...commit2' notations cannot be used). ++ +With '\--pretty' format other than oneline (for obvious reasons), +this causes the output to have two extra lines of information +taken from the reflog. By default, 'commit@\{Nth}' notation is +used in the output. When the starting commit is specified as +'commit@\{now}', output also uses 'commit@\{timestamp}' notation +instead. Under '\--pretty=oneline', the commit message is +prefixed with this information on the same line. +This option cannot be combined with '\--reverse'. +See also linkgit:git-reflog[1]. + +--merge:: + + After a failed merge, show refs that touch files having a + conflict and don't exist on all heads to merge. + +--boundary:: + + Output uninteresting commits at the boundary, which are usually + not shown. + +-- + +History Simplification +~~~~~~~~~~~~~~~~~~~~~~ + +Sometimes you are only interested in parts of the history, for example the +commits modifying a particular <path>. But there are two parts of +'History Simplification', one part is selecting the commits and the other +is how to do it, as there are various strategies to simplify the history. + +The following options select the commits to be shown: + +<paths>:: + + Commits modifying the given <paths> are selected. + +--simplify-by-decoration:: + + Commits that are referred by some branch or tag are selected. + +Note that extra commits can be shown to give a meaningful history. + +The following options affect the way the simplification is performed: + +Default mode:: + + Simplifies the history to the simplest history explaining the + final state of the tree. Simplest because it prunes some side + branches if the end result is the same (i.e. merging branches + with the same content) + +--full-history:: + + As the default mode but does not prune some history. + +--dense:: + + Only the selected commits are shown, plus some to have a + meaningful history. + +--sparse:: + + All commits in the simplified history are shown. + +--simplify-merges:: + + Additional option to '--full-history' to remove some needless + merges from the resulting history, as there are no selected + commits contributing to this merge. + +A more detailed explanation follows. + +Suppose you specified `foo` as the <paths>. We shall call commits +that modify `foo` !TREESAME, and the rest TREESAME. (In a diff +filtered for `foo`, they look different and equal, respectively.) + +In the following, we will always refer to the same example history to +illustrate the differences between simplification settings. We assume +that you are filtering for a file `foo` in this commit graph: +----------------------------------------------------------------------- + .-A---M---N---O---P + / / / / / + I B C D E + \ / / / / + `-------------' +----------------------------------------------------------------------- +The horizontal line of history A--P is taken to be the first parent of +each merge. The commits are: + +* `I` is the initial commit, in which `foo` exists with contents + "asdf", and a file `quux` exists with contents "quux". Initial + commits are compared to an empty tree, so `I` is !TREESAME. + +* In `A`, `foo` contains just "foo". + +* `B` contains the same change as `A`. Its merge `M` is trivial and + hence TREESAME to all parents. + +* `C` does not change `foo`, but its merge `N` changes it to "foobar", + so it is not TREESAME to any parent. + +* `D` sets `foo` to "baz". Its merge `O` combines the strings from + `N` and `D` to "foobarbaz"; i.e., it is not TREESAME to any parent. + +* `E` changes `quux` to "xyzzy", and its merge `P` combines the + strings to "quux xyzzy". Despite appearing interesting, `P` is + TREESAME to all parents. + +'rev-list' walks backwards through history, including or excluding +commits based on whether '\--full-history' and/or parent rewriting +(via '\--parents' or '\--children') are used. The following settings +are available. + +Default mode:: + + Commits are included if they are not TREESAME to any parent + (though this can be changed, see '\--sparse' below). If the + commit was a merge, and it was TREESAME to one parent, follow + only that parent. (Even if there are several TREESAME + parents, follow only one of them.) Otherwise, follow all + parents. ++ +This results in: ++ +----------------------------------------------------------------------- + .-A---N---O + / / + I---------D +----------------------------------------------------------------------- ++ +Note how the rule to only follow the TREESAME parent, if one is +available, removed `B` from consideration entirely. `C` was +considered via `N`, but is TREESAME. Root commits are compared to an +empty tree, so `I` is !TREESAME. ++ +Parent/child relations are only visible with --parents, but that does +not affect the commits selected in default mode, so we have shown the +parent lines. + +--full-history without parent rewriting:: + + This mode differs from the default in one point: always follow + all parents of a merge, even if it is TREESAME to one of them. + Even if more than one side of the merge has commits that are + included, this does not imply that the merge itself is! In + the example, we get ++ +----------------------------------------------------------------------- + I A B N D O +----------------------------------------------------------------------- ++ +`P` and `M` were excluded because they are TREESAME to a parent. `E`, +`C` and `B` were all walked, but only `B` was !TREESAME, so the others +do not appear. ++ +Note that without parent rewriting, it is not really possible to talk +about the parent/child relationships between the commits, so we show +them disconnected. + +--full-history with parent rewriting:: + + Ordinary commits are only included if they are !TREESAME + (though this can be changed, see '\--sparse' below). ++ +Merges are always included. However, their parent list is rewritten: +Along each parent, prune away commits that are not included +themselves. This results in ++ +----------------------------------------------------------------------- + .-A---M---N---O---P + / / / / / + I B / D / + \ / / / / + `-------------' +----------------------------------------------------------------------- ++ +Compare to '\--full-history' without rewriting above. Note that `E` +was pruned away because it is TREESAME, but the parent list of P was +rewritten to contain `E`'s parent `I`. The same happened for `C` and +`N`. Note also that `P` was included despite being TREESAME. + +In addition to the above settings, you can change whether TREESAME +affects inclusion: + +--dense:: + + Commits that are walked are included if they are not TREESAME + to any parent. + +--sparse:: + + All commits that are walked are included. ++ +Note that without '\--full-history', this still simplifies merges: if +one of the parents is TREESAME, we follow only that one, so the other +sides of the merge are never walked. + +Finally, there is a fourth simplification mode available: + +--simplify-merges:: + + First, build a history graph in the same way that + '\--full-history' with parent rewriting does (see above). ++ +Then simplify each commit `C` to its replacement `C'` in the final +history according to the following rules: ++ +-- +* Set `C'` to `C`. ++ +* Replace each parent `P` of `C'` with its simplification `P'`. In + the process, drop parents that are ancestors of other parents, and + remove duplicates. ++ +* If after this parent rewriting, `C'` is a root or merge commit (has + zero or >1 parents), a boundary commit, or !TREESAME, it remains. + Otherwise, it is replaced with its only parent. +-- ++ +The effect of this is best shown by way of comparing to +'\--full-history' with parent rewriting. The example turns into: ++ +----------------------------------------------------------------------- + .-A---M---N---O + / / / + I B D + \ / / + `---------' +----------------------------------------------------------------------- ++ +Note the major differences in `N` and `P` over '\--full-history': ++ +-- +* `N`'s parent list had `I` removed, because it is an ancestor of the + other parent `M`. Still, `N` remained because it is !TREESAME. ++ +* `P`'s parent list similarly had `I` removed. `P` was then + removed completely, because it had one parent and is TREESAME. +-- + +The '\--simplify-by-decoration' option allows you to view only the +big picture of the topology of the history, by omitting commits +that are not referenced by tags. Commits are marked as !TREESAME +(in other words, kept after history simplification rules described +above) if (1) they are referenced by tags, or (2) they change the +contents of the paths given on the command line. All other +commits are marked as TREESAME (subject to be simplified away). + +ifdef::git-rev-list[] +Bisection Helpers +~~~~~~~~~~~~~~~~~ + +--bisect:: + +Limit output to the one commit object which is roughly halfway between +included and excluded commits. Note that the bad bisection ref +`$GIT_DIR/refs/bisect/bad` is added to the included commits (if it +exists) and the good bisection refs `$GIT_DIR/refs/bisect/good-*` are +added to the excluded commits (if they exist). Thus, supposing there +are no refs in `$GIT_DIR/refs/bisect/`, if + +----------------------------------------------------------------------- + $ git rev-list --bisect foo ^bar ^baz +----------------------------------------------------------------------- + +outputs 'midpoint', the output of the two commands + +----------------------------------------------------------------------- + $ git rev-list foo ^midpoint + $ git rev-list midpoint ^bar ^baz +----------------------------------------------------------------------- + +would be of roughly the same length. Finding the change which +introduces a regression is thus reduced to a binary search: repeatedly +generate and test new 'midpoint's until the commit chain is of length +one. + +--bisect-vars:: + +This calculates the same as `--bisect`, except that refs in +`$GIT_DIR/refs/bisect/` are not used, and except that this outputs +text ready to be eval'ed by the shell. These lines will assign the +name of the midpoint revision to the variable `bisect_rev`, and the +expected number of commits to be tested after `bisect_rev` is tested +to `bisect_nr`, the expected number of commits to be tested if +`bisect_rev` turns out to be good to `bisect_good`, the expected +number of commits to be tested if `bisect_rev` turns out to be bad to +`bisect_bad`, and the number of commits we are bisecting right now to +`bisect_all`. + +--bisect-all:: + +This outputs all the commit objects between the included and excluded +commits, ordered by their distance to the included and excluded +commits. Refs in `$GIT_DIR/refs/bisect/` are not used. The farthest +from them is displayed first. (This is the only one displayed by +`--bisect`.) ++ +This is useful because it makes it easy to choose a good commit to +test when you want to avoid to test some of them for some reason (they +may not compile for example). ++ +This option can be used along with `--bisect-vars`, in this case, +after all the sorted commit objects, there will be the same text as if +`--bisect-vars` had been used alone. +endif::git-rev-list[] + + +Commit Ordering +~~~~~~~~~~~~~~~ + +By default, the commits are shown in reverse chronological order. + +--topo-order:: + + This option makes them appear in topological order (i.e. + descendant commits are shown before their parents). + +--date-order:: + + This option is similar to '--topo-order' in the sense that no + parent comes before all of its children, but otherwise things + are still ordered in the commit timestamp order. + +--reverse:: + + Output the commits in reverse order. + Cannot be combined with '\--walk-reflogs'. + +Object Traversal +~~~~~~~~~~~~~~~~ + +These options are mostly targeted for packing of git repositories. + +--objects:: + + Print the object IDs of any object referenced by the listed + commits. '--objects foo ^bar' thus means "send me + all object IDs which I need to download if I have the commit + object 'bar', but not 'foo'". + +--objects-edge:: + + Similar to '--objects', but also print the IDs of excluded + commits prefixed with a "-" character. This is used by + linkgit:git-pack-objects[1] to build "thin" pack, which records + objects in deltified form based on objects contained in these + excluded commits to reduce network traffic. + +--unpacked:: + + Only useful with '--objects'; print the object IDs that are not + in packs. + +--no-walk:: + + Only show the given revs, but do not traverse their ancestors. + +--do-walk:: + + Overrides a previous --no-walk. |