diff options
Diffstat (limited to 'Documentation/rev-list-options.txt')
| -rw-r--r-- | Documentation/rev-list-options.txt | 741 |
1 files changed, 566 insertions, 175 deletions
diff --git a/Documentation/rev-list-options.txt b/Documentation/rev-list-options.txt index 37dd1d61ea..1ae3c899ef 100644 --- a/Documentation/rev-list-options.txt +++ b/Documentation/rev-list-options.txt @@ -1,171 +1,54 @@ -Commit Formatting -~~~~~~~~~~~~~~~~~ - -ifdef::git-rev-list[] -Using these options, linkgit:git-rev-list[1] will act similar to the -more specialized family of commit log tools: linkgit:git-log[1], -linkgit:git-show[1], and linkgit:git-whatchanged[1] -endif::git-rev-list[] - -include::pretty-options.txt[] - ---relative-date:: - - Synonym for `--date=relative`. - ---date={relative,local,default,iso,rfc,short}:: - - Only takes effect for dates shown in human-readable format, such - as when using "--pretty". `log.date` config variable sets a default - value for log command's --date option. -+ -`--date=relative` shows dates relative to the current time, -e.g. "2 hours ago". -+ -`--date=local` shows timestamps in user's local timezone. -+ -`--date=iso` (or `--date=iso8601`) shows timestamps in ISO 8601 format. -+ -`--date=rfc` (or `--date=rfc2822`) shows timestamps in RFC 2822 -format, often found in E-mail messages. -+ -`--date=short` shows only date but not time, in `YYYY-MM-DD` format. -+ -`--date=default` shows timestamps in the original timezone -(either committer's or author's). - -ifdef::git-rev-list[] ---header:: - - Print the contents of the commit in raw-format; each record is - separated with a NUL character. -endif::git-rev-list[] - ---parents:: - - Print the parents of the commit. - -ifdef::git-rev-list[] ---timestamp:: - Print the raw commit timestamp. -endif::git-rev-list[] - ---left-right:: - - Mark which side of a symmetric diff a commit is reachable from. - Commits from the left side are prefixed with `<` and those from - the right with `>`. If combined with `--boundary`, those - commits are prefixed with `-`. -+ -For example, if you have this topology: -+ ------------------------------------------------------------------------ - y---b---b branch B - / \ / - / . - / / \ - o---x---a---a branch A ------------------------------------------------------------------------ -+ -you would get an output line this: -+ ------------------------------------------------------------------------ - $ git rev-list --left-right --boundary --pretty=oneline A...B - - >bbbbbbb... 3rd on b - >bbbbbbb... 2nd on b - <aaaaaaa... 3rd on a - <aaaaaaa... 2nd on a - -yyyyyyy... 1st on b - -xxxxxxx... 1st on a ------------------------------------------------------------------------ - ---graph:: - - Draw a text-based graphical representation of the commit history - on the left hand side of the output. This may cause extra lines - to be printed in between commits, in order for the graph history - to be drawn properly. -+ -This implies the '--topo-order' option by default, but the -'--date-order' option may also be specified. - -Diff Formatting -~~~~~~~~~~~~~~~ - -Below are listed options that control the formatting of diff output. -Some of them are specific to linkgit:git-rev-list[1], however other diff -options may be given. See linkgit:git-diff-files[1] for more options. - --c:: - - This flag changes the way a merge commit is displayed. It shows - the differences from each of the parents to the merge result - simultaneously instead of showing pairwise diff between a parent - and the result one at a time. Furthermore, it lists only files - which were modified from all parents. - ---cc:: - - This flag implies the '-c' options and further compresses the - patch output by omitting hunks that show differences from only - one parent, or show the same change from all but one parent for - an Octopus merge. - --r:: - - Show recursive diffs. - --t:: - - Show the tree objects in the diff output. This implies '-r'. - Commit Limiting ~~~~~~~~~~~~~~~ Besides specifying a range of commits that should be listed using the special notations explained in the description, additional commit -limiting may be applied. +limiting may be applied. Note that they are applied before commit +ordering and formatting options, such as '--reverse'. -- -n 'number':: ---max-count='number':: +--max-count=<number>:: - Limit the number of commits output. + Limit the number of commits to output. ---skip='number':: +--skip=<number>:: Skip 'number' commits before starting to show the commit output. ---since='date':: ---after='date':: +--since=<date>:: +--after=<date>:: Show commits more recent than a specific date. ---until='date':: ---before='date':: +--until=<date>:: +--before=<date>:: Show commits older than a specific date. ifdef::git-rev-list[] ---max-age='timestamp':: ---min-age='timestamp':: +--max-age=<timestamp>:: +--min-age=<timestamp>:: Limit the commits output to specified time range. endif::git-rev-list[] ---author='pattern':: ---committer='pattern':: +--author=<pattern>:: +--committer=<pattern>:: Limit the commits output to ones with author/committer header lines that match the specified pattern (regular expression). ---grep='pattern':: +--grep=<pattern>:: Limit the commits output to ones with log message that matches the specified pattern (regular expression). +--all-match:: + Limit the commits output to ones that match all given --grep, + --author and --committer instead of ones that match at least one. + -i:: --regexp-ignore-case:: @@ -187,17 +70,28 @@ endif::git-rev-list[] Stop when a given path disappears from the tree. ---full-history:: +--merges:: - Show also parts of history irrelevant to current state of a given - path. This turns off history simplification, which removed merges - which didn't change anything at all at some child. It will still actually - simplify away merges that didn't change anything at all into either - child. + Print only merge commits. This is exactly the same as `--min-parents=2`. --no-merges:: - Do not print commits with more than one parent. + Do not print commits with more than one parent. This is + exactly the same as `--max-parents=1`. + +--min-parents=<number>:: +--max-parents=<number>:: +--no-min-parents:: +--no-max-parents:: + + Show only commits which have at least (or at most) that many + commits. In particular, `--max-parents=1` is the same as `--no-merges`, + `--min-parents=2` is the same as `--merges`. `--max-parents=0` + gives all root commits and `--min-parents=3` all octopus merges. ++ +`--no-min-parents` and `--no-max-parents` reset these limits (to no limit) +again. Equivalent forms are `--min-parents=0` (any commit has 0 or more +parents) and `--max-parents=-1` (negative numbers denote no upper limit). --first-parent:: Follow only the first parent commit upon seeing a merge @@ -215,15 +109,58 @@ endif::git-rev-list[] --all:: - Pretend as if all the refs in `$GIT_DIR/refs/` are listed on the + Pretend as if all the refs in `refs/` are listed on the command line as '<commit>'. -ifdef::git-rev-list[] +--branches[=<pattern>]:: + + Pretend as if all the refs in `refs/heads` are listed + on the command line as '<commit>'. If '<pattern>' is given, limit + branches to ones matching given shell glob. If pattern lacks '?', + '{asterisk}', or '[', '/{asterisk}' at the end is implied. + +--tags[=<pattern>]:: + + Pretend as if all the refs in `refs/tags` are listed + on the command line as '<commit>'. If '<pattern>' is given, limit + tags to ones matching given shell glob. If pattern lacks '?', '{asterisk}', + or '[', '/{asterisk}' at the end is implied. + +--remotes[=<pattern>]:: + + Pretend as if all the refs in `refs/remotes` are listed + on the command line as '<commit>'. If '<pattern>' is given, limit + remote-tracking branches to ones matching given shell glob. + If pattern lacks '?', '{asterisk}', or '[', '/{asterisk}' at the end is implied. + +--glob=<glob-pattern>:: + Pretend as if all the refs matching shell glob '<glob-pattern>' + are listed on the command line as '<commit>'. Leading 'refs/', + is automatically prepended if missing. If pattern lacks '?', '{asterisk}', + or '[', '/{asterisk}' at the end is implied. + +--ignore-missing:: + + Upon seeing an invalid object name in the input, pretend as if + the bad input was not given. + +ifndef::git-rev-list[] +--bisect:: + + Pretend as if the bad bisection ref `refs/bisect/bad` + was listed and as if it was followed by `--not` and the good + bisection refs `refs/bisect/good-*` on the command + line. +endif::git-rev-list[] + --stdin:: In addition to the '<commit>' listed on the command - line, read them from the standard input. + line, read them from the standard input. If a '--' separator is + seen, stop reading commits and start reading paths to limit the + result. +ifdef::git-rev-list[] --quiet:: Don't print anything to standard output. This form @@ -233,6 +170,11 @@ ifdef::git-rev-list[] to /dev/null as the output does not have to be formatted. endif::git-rev-list[] +--cherry-mark:: + + Like `--cherry-pick` (see below) but mark equivalent commits + with `=` rather than omitting them, and inequivalent ones with `+`. + --cherry-pick:: Omit any commit that introduces the same change as @@ -241,12 +183,33 @@ endif::git-rev-list[] + For example, if you have two branches, `A` and `B`, a usual way to list all commits on only one side of them is with -`--left-right`, like the example above in the description of -that option. It however shows the commits that were cherry-picked +`--left-right` (see the example below in the description of +the `--left-right` option). It however shows the commits that were cherry-picked from the other branch (for example, "3rd on b" may be cherry-picked from branch A). With this option, such pairs of commits are excluded from the output. +--left-only:: +--right-only:: + + List only commits on the respective side of a symmetric range, + i.e. only those which would be marked `<` resp. `>` by + `--left-right`. ++ +For example, `--cherry-pick --right-only A...B` omits those +commits from `B` which are in `A` or are patch-equivalent to a commit in +`A`. In other words, this lists the `+` commits from `git cherry A B`. +More precisely, `--cherry-pick --right-only --no-merges` gives the exact +list. + +--cherry:: + + A synonym for `--right-only --cherry-mark --no-merges`; useful to + limit the output to the commits on our side and mark those that + have been applied to the other side of a forked history with + `git log --cherry upstream...mybranch`, similar to + `git cherry upstream mybranch`. + -g:: --walk-reflogs:: @@ -254,17 +217,16 @@ excluded from the output. reflog entries from the most recent one to older ones. When this option is used you cannot specify commits to exclude (that is, '{caret}commit', 'commit1..commit2', - nor 'commit1...commit2' notations cannot be used). + nor 'commit1\...commit2' notations cannot be used). + With '\--pretty' format other than oneline (for obvious reasons), this causes the output to have two extra lines of information taken from the reflog. By default, 'commit@\{Nth}' notation is used in the output. When the starting commit is specified as -'commit@{now}', output also uses 'commit@\{timestamp}' notation +'commit@\{now}', output also uses 'commit@\{timestamp}' notation instead. Under '\--pretty=oneline', the commit message is prefixed with this information on the same line. - -Cannot be combined with '\--reverse'. +This option cannot be combined with '\--reverse'. See also linkgit:git-reflog[1]. --merge:: @@ -277,32 +239,302 @@ See also linkgit:git-reflog[1]. Output uninteresting commits at the boundary, which are usually not shown. +-- + +History Simplification +~~~~~~~~~~~~~~~~~~~~~~ + +Sometimes you are only interested in parts of the history, for example the +commits modifying a particular <path>. But there are two parts of +'History Simplification', one part is selecting the commits and the other +is how to do it, as there are various strategies to simplify the history. + +The following options select the commits to be shown: + +<paths>:: + + Commits modifying the given <paths> are selected. + +--simplify-by-decoration:: + + Commits that are referred by some branch or tag are selected. + +Note that extra commits can be shown to give a meaningful history. + +The following options affect the way the simplification is performed: + +Default mode:: + + Simplifies the history to the simplest history explaining the + final state of the tree. Simplest because it prunes some side + branches if the end result is the same (i.e. merging branches + with the same content) + +--full-history:: + + Same as the default mode, but does not prune some history. + +--dense:: + + Only the selected commits are shown, plus some to have a + meaningful history. + +--sparse:: + + All commits in the simplified history are shown. + +--simplify-merges:: + + Additional option to '--full-history' to remove some needless + merges from the resulting history, as there are no selected + commits contributing to this merge. + +--ancestry-path:: + + When given a range of commits to display (e.g. 'commit1..commit2' + or 'commit2 {caret}commit1'), only display commits that exist + directly on the ancestry chain between the 'commit1' and + 'commit2', i.e. commits that are both descendants of 'commit1', + and ancestors of 'commit2'. + +A more detailed explanation follows. + +Suppose you specified `foo` as the <paths>. We shall call commits +that modify `foo` !TREESAME, and the rest TREESAME. (In a diff +filtered for `foo`, they look different and equal, respectively.) + +In the following, we will always refer to the same example history to +illustrate the differences between simplification settings. We assume +that you are filtering for a file `foo` in this commit graph: +----------------------------------------------------------------------- + .-A---M---N---O---P + / / / / / + I B C D E + \ / / / / + `-------------' +----------------------------------------------------------------------- +The horizontal line of history A---P is taken to be the first parent of +each merge. The commits are: + +* `I` is the initial commit, in which `foo` exists with contents + "asdf", and a file `quux` exists with contents "quux". Initial + commits are compared to an empty tree, so `I` is !TREESAME. + +* In `A`, `foo` contains just "foo". + +* `B` contains the same change as `A`. Its merge `M` is trivial and + hence TREESAME to all parents. + +* `C` does not change `foo`, but its merge `N` changes it to "foobar", + so it is not TREESAME to any parent. + +* `D` sets `foo` to "baz". Its merge `O` combines the strings from + `N` and `D` to "foobarbaz"; i.e., it is not TREESAME to any parent. + +* `E` changes `quux` to "xyzzy", and its merge `P` combines the + strings to "quux xyzzy". Despite appearing interesting, `P` is + TREESAME to all parents. + +'rev-list' walks backwards through history, including or excluding +commits based on whether '\--full-history' and/or parent rewriting +(via '\--parents' or '\--children') are used. The following settings +are available. + +Default mode:: + + Commits are included if they are not TREESAME to any parent + (though this can be changed, see '\--sparse' below). If the + commit was a merge, and it was TREESAME to one parent, follow + only that parent. (Even if there are several TREESAME + parents, follow only one of them.) Otherwise, follow all + parents. ++ +This results in: ++ +----------------------------------------------------------------------- + .-A---N---O + / / / + I---------D +----------------------------------------------------------------------- ++ +Note how the rule to only follow the TREESAME parent, if one is +available, removed `B` from consideration entirely. `C` was +considered via `N`, but is TREESAME. Root commits are compared to an +empty tree, so `I` is !TREESAME. ++ +Parent/child relations are only visible with --parents, but that does +not affect the commits selected in default mode, so we have shown the +parent lines. + +--full-history without parent rewriting:: + + This mode differs from the default in one point: always follow + all parents of a merge, even if it is TREESAME to one of them. + Even if more than one side of the merge has commits that are + included, this does not imply that the merge itself is! In + the example, we get ++ +----------------------------------------------------------------------- + I A B N D O +----------------------------------------------------------------------- ++ +`P` and `M` were excluded because they are TREESAME to a parent. `E`, +`C` and `B` were all walked, but only `B` was !TREESAME, so the others +do not appear. ++ +Note that without parent rewriting, it is not really possible to talk +about the parent/child relationships between the commits, so we show +them disconnected. + +--full-history with parent rewriting:: + + Ordinary commits are only included if they are !TREESAME + (though this can be changed, see '\--sparse' below). ++ +Merges are always included. However, their parent list is rewritten: +Along each parent, prune away commits that are not included +themselves. This results in ++ +----------------------------------------------------------------------- + .-A---M---N---O---P + / / / / / + I B / D / + \ / / / / + `-------------' +----------------------------------------------------------------------- ++ +Compare to '\--full-history' without rewriting above. Note that `E` +was pruned away because it is TREESAME, but the parent list of P was +rewritten to contain `E`'s parent `I`. The same happened for `C` and +`N`. Note also that `P` was included despite being TREESAME. + +In addition to the above settings, you can change whether TREESAME +affects inclusion: + --dense:: + + Commits that are walked are included if they are not TREESAME + to any parent. + --sparse:: -When optional paths are given, the default behaviour ('--dense') is to -only output commits that changes at least one of them, and also ignore -merges that do not touch the given paths. + All commits that are walked are included. ++ +Note that without '\--full-history', this still simplifies merges: if +one of the parents is TREESAME, we follow only that one, so the other +sides of the merge are never walked. + +--simplify-merges:: + + First, build a history graph in the same way that + '\--full-history' with parent rewriting does (see above). ++ +Then simplify each commit `C` to its replacement `C'` in the final +history according to the following rules: ++ +-- +* Set `C'` to `C`. ++ +* Replace each parent `P` of `C'` with its simplification `P'`. In + the process, drop parents that are ancestors of other parents, and + remove duplicates. ++ +* If after this parent rewriting, `C'` is a root or merge commit (has + zero or >1 parents), a boundary commit, or !TREESAME, it remains. + Otherwise, it is replaced with its only parent. +-- ++ +The effect of this is best shown by way of comparing to +'\--full-history' with parent rewriting. The example turns into: ++ +----------------------------------------------------------------------- + .-A---M---N---O + / / / + I B D + \ / / + `---------' +----------------------------------------------------------------------- ++ +Note the major differences in `N` and `P` over '--full-history': ++ +-- +* `N`'s parent list had `I` removed, because it is an ancestor of the + other parent `M`. Still, `N` remained because it is !TREESAME. ++ +* `P`'s parent list similarly had `I` removed. `P` was then + removed completely, because it had one parent and is TREESAME. +-- + +Finally, there is a fifth simplification mode available: + +--ancestry-path:: + + Limit the displayed commits to those directly on the ancestry + chain between the "from" and "to" commits in the given commit + range. I.e. only display commits that are ancestor of the "to" + commit, and descendants of the "from" commit. ++ +As an example use case, consider the following commit history: ++ +----------------------------------------------------------------------- + D---E-------F + / \ \ + B---C---G---H---I---J + / \ + A-------K---------------L--M +----------------------------------------------------------------------- ++ +A regular 'D..M' computes the set of commits that are ancestors of `M`, +but excludes the ones that are ancestors of `D`. This is useful to see +what happened to the history leading to `M` since `D`, in the sense +that "what does `M` have that did not exist in `D`". The result in this +example would be all the commits, except `A` and `B` (and `D` itself, +of course). ++ +When we want to find out what commits in `M` are contaminated with the +bug introduced by `D` and need fixing, however, we might want to view +only the subset of 'D..M' that are actually descendants of `D`, i.e. +excluding `C` and `K`. This is exactly what the '--ancestry-path' +option does. Applied to the 'D..M' range, it results in: ++ +----------------------------------------------------------------------- + E-------F + \ \ + G---H---I---J + \ + L--M +----------------------------------------------------------------------- -Use the '--sparse' flag to makes the command output all eligible commits -(still subject to count and age limitation), but apply merge -simplification nevertheless. +The '\--simplify-by-decoration' option allows you to view only the +big picture of the topology of the history, by omitting commits +that are not referenced by tags. Commits are marked as !TREESAME +(in other words, kept after history simplification rules described +above) if (1) they are referenced by tags, or (2) they change the +contents of the paths given on the command line. All other +commits are marked as TREESAME (subject to be simplified away). ifdef::git-rev-list[] +Bisection Helpers +~~~~~~~~~~~~~~~~~ + --bisect:: Limit output to the one commit object which is roughly halfway between -the included and excluded commits. Thus, if +included and excluded commits. Note that the bad bisection ref +`refs/bisect/bad` is added to the included commits (if it +exists) and the good bisection refs `refs/bisect/good-*` are +added to the excluded commits (if they exist). Thus, supposing there +are no refs in `refs/bisect/`, if ----------------------------------------------------------------------- - $ git-rev-list --bisect foo ^bar ^baz + $ git rev-list --bisect foo ^bar ^baz ----------------------------------------------------------------------- outputs 'midpoint', the output of the two commands ----------------------------------------------------------------------- - $ git-rev-list foo ^midpoint - $ git-rev-list midpoint ^bar ^baz + $ git rev-list foo ^midpoint + $ git rev-list midpoint ^bar ^baz ----------------------------------------------------------------------- would be of roughly the same length. Finding the change which @@ -312,33 +544,34 @@ one. --bisect-vars:: -This calculates the same as `--bisect`, but outputs text ready -to be eval'ed by the shell. These lines will assign the name of -the midpoint revision to the variable `bisect_rev`, and the -expected number of commits to be tested after `bisect_rev` is -tested to `bisect_nr`, the expected number of commits to be -tested if `bisect_rev` turns out to be good to `bisect_good`, -the expected number of commits to be tested if `bisect_rev` -turns out to be bad to `bisect_bad`, and the number of commits -we are bisecting right now to `bisect_all`. +This calculates the same as `--bisect`, except that refs in +`refs/bisect/` are not used, and except that this outputs +text ready to be eval'ed by the shell. These lines will assign the +name of the midpoint revision to the variable `bisect_rev`, and the +expected number of commits to be tested after `bisect_rev` is tested +to `bisect_nr`, the expected number of commits to be tested if +`bisect_rev` turns out to be good to `bisect_good`, the expected +number of commits to be tested if `bisect_rev` turns out to be bad to +`bisect_bad`, and the number of commits we are bisecting right now to +`bisect_all`. --bisect-all:: This outputs all the commit objects between the included and excluded commits, ordered by their distance to the included and excluded -commits. The farthest from them is displayed first. (This is the only -one displayed by `--bisect`.) - +commits. Refs in `refs/bisect/` are not used. The farthest +from them is displayed first. (This is the only one displayed by +`--bisect`.) ++ This is useful because it makes it easy to choose a good commit to test when you want to avoid to test some of them for some reason (they may not compile for example). - ++ This option can be used along with `--bisect-vars`, in this case, after all the sorted commit objects, there will be the same text as if `--bisect-vars` had been used alone. endif::git-rev-list[] --- Commit Ordering ~~~~~~~~~~~~~~~ @@ -393,3 +626,161 @@ These options are mostly targeted for packing of git repositories. --do-walk:: Overrides a previous --no-walk. + +Commit Formatting +~~~~~~~~~~~~~~~~~ + +ifdef::git-rev-list[] +Using these options, linkgit:git-rev-list[1] will act similar to the +more specialized family of commit log tools: linkgit:git-log[1], +linkgit:git-show[1], and linkgit:git-whatchanged[1] +endif::git-rev-list[] + +include::pretty-options.txt[] + +--relative-date:: + + Synonym for `--date=relative`. + +--date=(relative|local|default|iso|rfc|short|raw):: + + Only takes effect for dates shown in human-readable format, such + as when using "--pretty". `log.date` config variable sets a default + value for log command's --date option. ++ +`--date=relative` shows dates relative to the current time, +e.g. "2 hours ago". ++ +`--date=local` shows timestamps in user's local timezone. ++ +`--date=iso` (or `--date=iso8601`) shows timestamps in ISO 8601 format. ++ +`--date=rfc` (or `--date=rfc2822`) shows timestamps in RFC 2822 +format, often found in E-mail messages. ++ +`--date=short` shows only date but not time, in `YYYY-MM-DD` format. ++ +`--date=raw` shows the date in the internal raw git format `%s %z` format. ++ +`--date=default` shows timestamps in the original timezone +(either committer's or author's). + +ifdef::git-rev-list[] +--header:: + + Print the contents of the commit in raw-format; each record is + separated with a NUL character. +endif::git-rev-list[] + +--parents:: + + Print also the parents of the commit (in the form "commit parent..."). + Also enables parent rewriting, see 'History Simplification' below. + +--children:: + + Print also the children of the commit (in the form "commit child..."). + Also enables parent rewriting, see 'History Simplification' below. + +ifdef::git-rev-list[] +--timestamp:: + Print the raw commit timestamp. +endif::git-rev-list[] + +--left-right:: + + Mark which side of a symmetric diff a commit is reachable from. + Commits from the left side are prefixed with `<` and those from + the right with `>`. If combined with `--boundary`, those + commits are prefixed with `-`. ++ +For example, if you have this topology: ++ +----------------------------------------------------------------------- + y---b---b branch B + / \ / + / . + / / \ + o---x---a---a branch A +----------------------------------------------------------------------- ++ +you would get an output like this: ++ +----------------------------------------------------------------------- + $ git rev-list --left-right --boundary --pretty=oneline A...B + + >bbbbbbb... 3rd on b + >bbbbbbb... 2nd on b + <aaaaaaa... 3rd on a + <aaaaaaa... 2nd on a + -yyyyyyy... 1st on b + -xxxxxxx... 1st on a +----------------------------------------------------------------------- + +--graph:: + + Draw a text-based graphical representation of the commit history + on the left hand side of the output. This may cause extra lines + to be printed in between commits, in order for the graph history + to be drawn properly. ++ +This enables parent rewriting, see 'History Simplification' below. ++ +This implies the '--topo-order' option by default, but the +'--date-order' option may also be specified. + +ifdef::git-rev-list[] +--count:: + Print a number stating how many commits would have been + listed, and suppress all other output. When used together + with '--left-right', instead print the counts for left and + right commits, separated by a tab. When used together with + '--cherry-mark', omit patch equivalent commits from these + counts and print the count for equivalent commits separated + by a tab. +endif::git-rev-list[] + + +ifndef::git-rev-list[] +Diff Formatting +~~~~~~~~~~~~~~~ + +Below are listed options that control the formatting of diff output. +Some of them are specific to linkgit:git-rev-list[1], however other diff +options may be given. See linkgit:git-diff-files[1] for more options. + +-c:: + + With this option, diff output for a merge commit + shows the differences from each of the parents to the merge result + simultaneously instead of showing pairwise diff between a parent + and the result one at a time. Furthermore, it lists only files + which were modified from all parents. + +--cc:: + + This flag implies the '-c' options and further compresses the + patch output by omitting uninteresting hunks whose contents in + the parents have only two variants and the merge result picks + one of them without modification. + +-m:: + + This flag makes the merge commits show the full diff like + regular commits; for each merge parent, a separate log entry + and diff is generated. An exception is that only diff against + the first parent is shown when '--first-parent' option is given; + in that case, the output represents the changes the merge + brought _into_ the then-current branch. + +-r:: + + Show recursive diffs. + +-t:: + + Show the tree objects in the diff output. This implies '-r'. + +-s:: + Suppress diff output. +endif::git-rev-list[] |