diff options
Diffstat (limited to 'Documentation/rev-list-options.txt')
| -rw-r--r-- | Documentation/rev-list-options.txt | 217 |
1 files changed, 183 insertions, 34 deletions
diff --git a/Documentation/rev-list-options.txt b/Documentation/rev-list-options.txt index 735cf07b20..81c0e6f184 100644 --- a/Documentation/rev-list-options.txt +++ b/Documentation/rev-list-options.txt @@ -13,7 +13,7 @@ include::pretty-options.txt[] Synonym for `--date=relative`. ---date={relative,local,default,iso,rfc,short}:: +--date={relative,local,default,iso,rfc,short,raw}:: Only takes effect for dates shown in human-readable format, such as when using "--pretty". `log.date` config variable sets a default @@ -31,6 +31,8 @@ format, often found in E-mail messages. + `--date=short` shows only date but not time, in `YYYY-MM-DD` format. + +`--date=raw` shows the date in the internal raw git format `%s %z` format. ++ `--date=default` shows timestamps in the original timezone (either committer's or author's). @@ -138,42 +140,46 @@ limiting may be applied. -- -n 'number':: ---max-count='number':: +--max-count=<number>:: Limit the number of commits output. ---skip='number':: +--skip=<number>:: Skip 'number' commits before starting to show the commit output. ---since='date':: ---after='date':: +--since=<date>:: +--after=<date>:: Show commits more recent than a specific date. ---until='date':: ---before='date':: +--until=<date>:: +--before=<date>:: Show commits older than a specific date. ifdef::git-rev-list[] ---max-age='timestamp':: ---min-age='timestamp':: +--max-age=<timestamp>:: +--min-age=<timestamp>:: Limit the commits output to specified time range. endif::git-rev-list[] ---author='pattern':: ---committer='pattern':: +--author=<pattern>:: +--committer=<pattern>:: Limit the commits output to ones with author/committer header lines that match the specified pattern (regular expression). ---grep='pattern':: +--grep=<pattern>:: Limit the commits output to ones with log message that matches the specified pattern (regular expression). +--all-match:: + Limit the commits output to ones that match all given --grep, + --author and --committer instead of ones that match at least one. + -i:: --regexp-ignore-case:: @@ -195,6 +201,10 @@ endif::git-rev-list[] Stop when a given path disappears from the tree. +--merges:: + + Print only merge commits. + --no-merges:: Do not print commits with more than one parent. @@ -215,15 +225,54 @@ endif::git-rev-list[] --all:: - Pretend as if all the refs in `$GIT_DIR/refs/` are listed on the + Pretend as if all the refs in `refs/` are listed on the command line as '<commit>'. -ifdef::git-rev-list[] +--branches[=pattern]:: + + Pretend as if all the refs in `refs/heads` are listed + on the command line as '<commit>'. If `pattern` is given, limit + branches to ones matching given shell glob. If pattern lacks '?', + '*', or '[', '/*' at the end is implied. + +--tags[=pattern]:: + + Pretend as if all the refs in `refs/tags` are listed + on the command line as '<commit>'. If `pattern` is given, limit + tags to ones matching given shell glob. If pattern lacks '?', '*', + or '[', '/*' at the end is implied. + +--remotes[=pattern]:: + + Pretend as if all the refs in `refs/remotes` are listed + on the command line as '<commit>'. If `pattern`is given, limit + remote tracking branches to ones matching given shell glob. + If pattern lacks '?', '*', or '[', '/*' at the end is implied. + +--glob=glob-pattern:: + Pretend as if all the refs matching shell glob `glob-pattern` + are listed on the command line as '<commit>'. Leading 'refs/', + is automatically prepended if missing. If pattern lacks '?', '*', + or '[', '/*' at the end is implied. + + +ifndef::git-rev-list[] +--bisect:: + + Pretend as if the bad bisection ref `refs/bisect/bad` + was listed and as if it was followed by `--not` and the good + bisection refs `refs/bisect/good-*` on the command + line. +endif::git-rev-list[] + --stdin:: In addition to the '<commit>' listed on the command - line, read them from the standard input. + line, read them from the standard input. If a '--' separator is + seen, stop reading commits and start reading paths to limit the + result. +ifdef::git-rev-list[] --quiet:: Don't print anything to standard output. This form @@ -281,8 +330,52 @@ See also linkgit:git-reflog[1]. History Simplification ~~~~~~~~~~~~~~~~~~~~~~ -When optional paths are given, 'git-rev-list' simplifies commits with -various strategies, according to the options you have selected. +Sometimes you are only interested in parts of the history, for example the +commits modifying a particular <path>. But there are two parts of +'History Simplification', one part is selecting the commits and the other +is how to do it, as there are various strategies to simplify the history. + +The following options select the commits to be shown: + +<paths>:: + + Commits modifying the given <paths> are selected. + +--simplify-by-decoration:: + + Commits that are referred by some branch or tag are selected. + +Note that extra commits can be shown to give a meaningful history. + +The following options affect the way the simplification is performed: + +Default mode:: + + Simplifies the history to the simplest history explaining the + final state of the tree. Simplest because it prunes some side + branches if the end result is the same (i.e. merging branches + with the same content) + +--full-history:: + + As the default mode but does not prune some history. + +--dense:: + + Only the selected commits are shown, plus some to have a + meaningful history. + +--sparse:: + + All commits in the simplified history are shown. + +--simplify-merges:: + + Additional option to '--full-history' to remove some needless + merges from the resulting history, as there are no selected + commits contributing to this merge. + +A more detailed explanation follows. Suppose you specified `foo` as the <paths>. We shall call commits that modify `foo` !TREESAME, and the rest TREESAME. (In a diff @@ -409,6 +502,56 @@ Note that without '\--full-history', this still simplifies merges: if one of the parents is TREESAME, we follow only that one, so the other sides of the merge are never walked. +Finally, there is a fourth simplification mode available: + +--simplify-merges:: + + First, build a history graph in the same way that + '\--full-history' with parent rewriting does (see above). ++ +Then simplify each commit `C` to its replacement `C'` in the final +history according to the following rules: ++ +-- +* Set `C'` to `C`. ++ +* Replace each parent `P` of `C'` with its simplification `P'`. In + the process, drop parents that are ancestors of other parents, and + remove duplicates. ++ +* If after this parent rewriting, `C'` is a root or merge commit (has + zero or >1 parents), a boundary commit, or !TREESAME, it remains. + Otherwise, it is replaced with its only parent. +-- ++ +The effect of this is best shown by way of comparing to +'\--full-history' with parent rewriting. The example turns into: ++ +----------------------------------------------------------------------- + .-A---M---N---O + / / / + I B D + \ / / + `---------' +----------------------------------------------------------------------- ++ +Note the major differences in `N` and `P` over '\--full-history': ++ +-- +* `N`'s parent list had `I` removed, because it is an ancestor of the + other parent `M`. Still, `N` remained because it is !TREESAME. ++ +* `P`'s parent list similarly had `I` removed. `P` was then + removed completely, because it had one parent and is TREESAME. +-- + +The '\--simplify-by-decoration' option allows you to view only the +big picture of the topology of the history, by omitting commits +that are not referenced by tags. Commits are marked as !TREESAME +(in other words, kept after history simplification rules described +above) if (1) they are referenced by tags, or (2) they change the +contents of the paths given on the command line. All other +commits are marked as TREESAME (subject to be simplified away). ifdef::git-rev-list[] Bisection Helpers @@ -417,17 +560,21 @@ Bisection Helpers --bisect:: Limit output to the one commit object which is roughly halfway between -the included and excluded commits. Thus, if +included and excluded commits. Note that the bad bisection ref +`refs/bisect/bad` is added to the included commits (if it +exists) and the good bisection refs `refs/bisect/good-*` are +added to the excluded commits (if they exist). Thus, supposing there +are no refs in `refs/bisect/`, if ----------------------------------------------------------------------- - $ git-rev-list --bisect foo ^bar ^baz + $ git rev-list --bisect foo ^bar ^baz ----------------------------------------------------------------------- outputs 'midpoint', the output of the two commands ----------------------------------------------------------------------- - $ git-rev-list foo ^midpoint - $ git-rev-list midpoint ^bar ^baz + $ git rev-list foo ^midpoint + $ git rev-list midpoint ^bar ^baz ----------------------------------------------------------------------- would be of roughly the same length. Finding the change which @@ -437,27 +584,29 @@ one. --bisect-vars:: -This calculates the same as `--bisect`, but outputs text ready -to be eval'ed by the shell. These lines will assign the name of -the midpoint revision to the variable `bisect_rev`, and the -expected number of commits to be tested after `bisect_rev` is -tested to `bisect_nr`, the expected number of commits to be -tested if `bisect_rev` turns out to be good to `bisect_good`, -the expected number of commits to be tested if `bisect_rev` -turns out to be bad to `bisect_bad`, and the number of commits -we are bisecting right now to `bisect_all`. +This calculates the same as `--bisect`, except that refs in +`refs/bisect/` are not used, and except that this outputs +text ready to be eval'ed by the shell. These lines will assign the +name of the midpoint revision to the variable `bisect_rev`, and the +expected number of commits to be tested after `bisect_rev` is tested +to `bisect_nr`, the expected number of commits to be tested if +`bisect_rev` turns out to be good to `bisect_good`, the expected +number of commits to be tested if `bisect_rev` turns out to be bad to +`bisect_bad`, and the number of commits we are bisecting right now to +`bisect_all`. --bisect-all:: This outputs all the commit objects between the included and excluded commits, ordered by their distance to the included and excluded -commits. The farthest from them is displayed first. (This is the only -one displayed by `--bisect`.) - +commits. Refs in `refs/bisect/` are not used. The farthest +from them is displayed first. (This is the only one displayed by +`--bisect`.) ++ This is useful because it makes it easy to choose a good commit to test when you want to avoid to test some of them for some reason (they may not compile for example). - ++ This option can be used along with `--bisect-vars`, in this case, after all the sorted commit objects, there will be the same text as if `--bisect-vars` had been used alone. |