diff options
Diffstat (limited to 'Documentation/rev-list-options.txt')
| -rw-r--r-- | Documentation/rev-list-options.txt | 119 |
1 files changed, 53 insertions, 66 deletions
diff --git a/Documentation/rev-list-options.txt b/Documentation/rev-list-options.txt index 04ad7dd36e..24569b06d1 100644 --- a/Documentation/rev-list-options.txt +++ b/Documentation/rev-list-options.txt @@ -128,8 +128,12 @@ parents) and `--max-parents=-1` (negative numbers denote no upper limit). because merges into a topic branch tend to be only about adjusting to updated upstream from time to time, and this option allows you to ignore the individual commits - brought in to your history by such a merge. Cannot be - combined with --bisect. + brought in to your history by such a merge. +ifdef::git-log[] ++ +This option also changes default diff format for merge commits +to `first-parent`, see `--diff-merges=first-parent` for details. +endif::git-log[] --not:: Reverses the meaning of the '{caret}' prefix (or lack thereof) @@ -207,7 +211,7 @@ ifndef::git-rev-list[] Pretend as if the bad bisection ref `refs/bisect/bad` was listed and as if it was followed by `--not` and the good bisection refs `refs/bisect/good-*` on the command - line. Cannot be combined with --first-parent. + line. endif::git-rev-list[] --stdin:: @@ -223,6 +227,15 @@ ifdef::git-rev-list[] test the exit status to see if a range of objects is fully connected (or not). It is faster than redirecting stdout to `/dev/null` as the output does not have to be formatted. + +--disk-usage:: + Suppress normal output; instead, print the sum of the bytes used + for on-disk storage by the selected commits or objects. This is + equivalent to piping the output into `git cat-file + --batch-check='%(objectsize:disk)'`, except that it runs much + faster (especially with `--use-bitmap-index`). See the `CAVEATS` + section in linkgit:git-cat-file[1] for the limitations of what + "on-disk storage" means. endif::git-rev-list[] --cherry-mark:: @@ -581,12 +594,12 @@ option does. Applied to the 'D..M' range, it results in: Before discussing another option, `--show-pulls`, we need to create a new example history. -+ + A common problem users face when looking at simplified history is that a commit they know changed a file somehow does not appear in the file's simplified history. Let's demonstrate a new example and show how options such as `--full-history` and `--simplify-merges` works in that case: -+ + ----------------------------------------------------------------------- .-A---M-----C--N---O---P / / \ \ \/ / / @@ -595,7 +608,7 @@ such as `--full-history` and `--simplify-merges` works in that case: \ / /\ / `---X--' `---Y--' ----------------------------------------------------------------------- -+ + For this example, suppose `I` created `file.txt` which was modified by `A`, `B`, and `X` in different ways. The single-parent commits `C`, `Z`, and `Y` do not change `file.txt`. The merge commit `M` was created by @@ -607,19 +620,19 @@ the contents of `file.txt` at `X`. Hence, `R` is TREESAME to `X` but not contents of `file.txt` at `R`, so `N` is TREESAME to `R` but not `C`. The merge commits `O` and `P` are TREESAME to their first parents, but not to their second parents, `Z` and `Y` respectively. -+ + When using the default mode, `N` and `R` both have a TREESAME parent, so those edges are walked and the others are ignored. The resulting history graph is: -+ + ----------------------------------------------------------------------- I---X ----------------------------------------------------------------------- -+ + When using `--full-history`, Git walks every edge. This will discover the commits `A` and `B` and the merge `M`, but also will reveal the merge commits `O` and `P`. With parent rewriting, the resulting graph is: -+ + ----------------------------------------------------------------------- .-A---M--------N---O---P / / \ \ \/ / / @@ -628,21 +641,21 @@ merge commits `O` and `P`. With parent rewriting, the resulting graph is: \ / /\ / `---X--' `------' ----------------------------------------------------------------------- -+ + Here, the merge commits `O` and `P` contribute extra noise, as they did not actually contribute a change to `file.txt`. They only merged a topic that was based on an older version of `file.txt`. This is a common issue in repositories using a workflow where many contributors work in parallel and merge their topic branches along a single trunk: manu unrelated merges appear in the `--full-history` results. -+ + When using the `--simplify-merges` option, the commits `O` and `P` disappear from the results. This is because the rewritten second parents of `O` and `P` are reachable from their first parents. Those edges are removed and then the commits look like single-parent commits that are TREESAME to their parent. This also happens to the commit `N`, resulting in a history view as follows: -+ + ----------------------------------------------------------------------- .-A---M--. / / \ @@ -651,18 +664,18 @@ in a history view as follows: \ / / `---X--' ----------------------------------------------------------------------- -+ + In this view, we see all of the important single-parent changes from `A`, `B`, and `X`. We also see the carefully-resolved merge `M` and the not-so-carefully-resolved merge `R`. This is usually enough information to determine why the commits `A` and `B` "disappeared" from history in the default view. However, there are a few issues with this approach. -+ + The first issue is performance. Unlike any previous option, the `--simplify-merges` option requires walking the entire commit history before returning a single result. This can make the option difficult to use for very large repositories. -+ + The second issue is one of auditing. When many contributors are working on the same repository, it is important which merge commits introduced a change into an important branch. The problematic merge `R` above is @@ -671,10 +684,13 @@ important branch. Instead, the merge `N` was used to merge `R` and `X` into the important branch. This commit may have information about why the change `X` came to override the changes from `A` and `B` in its commit message. + +--show-pulls:: + In addition to the commits shown in the default history, show + each merge commit that is not TREESAME to its first parent but + is TREESAME to a later parent. + -The `--show-pulls` option helps with both of these issues by adding more -merge commits to the history results. If a merge is not TREESAME to its -first parent but is TREESAME to a later parent, then that merge is +When a merge commit is included by `--show-pulls`, the merge is treated as if it "pulled" the change from another branch. When using `--show-pulls` on this example (and no other options) the resulting graph is: @@ -740,7 +756,7 @@ outputs 'midpoint', the output of the two commands would be of roughly the same length. Finding the change which introduces a regression is thus reduced to a binary search: repeatedly generate and test new 'midpoint's until the commit chain is of length -one. Cannot be combined with --first-parent. +one. --bisect-vars:: This calculates the same as `--bisect`, except that refs in @@ -876,9 +892,12 @@ or units. n may be zero. The suffixes k, m, and g can be used to name units in KiB, MiB, or GiB. For example, 'blob:limit=1k' is the same as 'blob:limit=1024'. + +The form '--filter=object:type=(tag|commit|tree|blob)' omits all objects +which are not of the requested type. ++ The form '--filter=sparse:oid=<blob-ish>' uses a sparse-checkout specification contained in the blob (or blob-expression) '<blob-ish>' -to omit blobs that would not be not required for a sparse checkout on +to omit blobs that would not be required for a sparse checkout on the requested refs. + The form '--filter=tree:<depth>' omits all blobs and trees whose depth @@ -914,6 +933,11 @@ equivalent. --no-filter:: Turn off any previous `--filter=` argument. +--filter-provided-objects:: + Filter the list of explicitly provided objects, which would otherwise + always be printed even if they did not match any of the filters. Only + useful with `--filter=`. + --filter-print-omitted:: Only useful with `--filter=`; prints a list of the objects omitted by the filter. Object IDs are prefixed with a ``~'' character. @@ -1040,6 +1064,14 @@ ifdef::git-rev-list[] --header:: Print the contents of the commit in raw-format; each record is separated with a NUL character. + +--no-commit-header:: + Suppress the header line containing "commit" and the object ID printed before + the specified format. This has no effect on the built-in formats; only custom + formats are affected. + +--commit-header:: + Overrides a previous `--no-commit-header`. endif::git-rev-list[] --parents:: @@ -1114,48 +1146,3 @@ ifdef::git-rev-list[] by a tab. endif::git-rev-list[] endif::git-shortlog[] - -ifndef::git-shortlog[] -ifndef::git-rev-list[] -Diff Formatting -~~~~~~~~~~~~~~~ - -Listed below are options that control the formatting of diff output. -Some of them are specific to linkgit:git-rev-list[1], however other diff -options may be given. See linkgit:git-diff-files[1] for more options. - --c:: - With this option, diff output for a merge commit - shows the differences from each of the parents to the merge result - simultaneously instead of showing pairwise diff between a parent - and the result one at a time. Furthermore, it lists only files - which were modified from all parents. - ---cc:: - This flag implies the `-c` option and further compresses the - patch output by omitting uninteresting hunks whose contents in - the parents have only two variants and the merge result picks - one of them without modification. - ---combined-all-paths:: - This flag causes combined diffs (used for merge commits) to - list the name of the file from all parents. It thus only has - effect when -c or --cc are specified, and is likely only - useful if filename changes are detected (i.e. when either - rename or copy detection have been requested). - --m:: - This flag makes the merge commits show the full diff like - regular commits; for each merge parent, a separate log entry - and diff is generated. An exception is that only diff against - the first parent is shown when `--first-parent` option is given; - in that case, the output represents the changes the merge - brought _into_ the then-current branch. - --r:: - Show recursive diffs. - --t:: - Show the tree objects in the diff output. This implies `-r`. -endif::git-rev-list[] -endif::git-shortlog[] |