diff options
Diffstat (limited to 'Documentation/howto')
| -rw-r--r-- | Documentation/howto/new-command.txt | 2 | ||||
| -rw-r--r-- | Documentation/howto/recover-corrupted-object-harder.txt | 242 | ||||
| -rw-r--r-- | Documentation/howto/revert-a-faulty-merge.txt | 8 | ||||
| -rw-r--r-- | Documentation/howto/revert-branch-rebase.txt | 4 | ||||
| -rw-r--r-- | Documentation/howto/setup-git-server-over-http.txt | 8 |
5 files changed, 255 insertions, 9 deletions
diff --git a/Documentation/howto/new-command.txt b/Documentation/howto/new-command.txt index 2abc3a0a0e..d7de5a3e9e 100644 --- a/Documentation/howto/new-command.txt +++ b/Documentation/howto/new-command.txt @@ -94,7 +94,7 @@ your language, document it in the INSTALL file. 6. There is a file command-list.txt in the distribution main directory that categorizes commands by type, so they can be listed in appropriate subsections in the documentation's summary command list. Add an entry -for yours. To understand the categories, look at git-cmmands.txt +for yours. To understand the categories, look at git-commands.txt in the main directory. 7. Give the maintainer one paragraph to include in the RelNotes file diff --git a/Documentation/howto/recover-corrupted-object-harder.txt b/Documentation/howto/recover-corrupted-object-harder.txt new file mode 100644 index 0000000000..6f33dac0e0 --- /dev/null +++ b/Documentation/howto/recover-corrupted-object-harder.txt @@ -0,0 +1,242 @@ +Date: Wed, 16 Oct 2013 04:34:01 -0400 +From: Jeff King <peff@peff.net> +Subject: pack corruption post-mortem +Abstract: Recovering a corrupted object when no good copy is available. +Content-type: text/asciidoc + +How to recover an object from scratch +===================================== + +I was recently presented with a repository with a corrupted packfile, +and was asked if the data was recoverable. This post-mortem describes +the steps I took to investigate and fix the problem. I thought others +might find the process interesting, and it might help somebody in the +same situation. + +******************************** +Note: In this case, no good copy of the repository was available. For +the much easier case where you can get the corrupted object from +elsewhere, see link:recover-corrupted-blob-object.html[this howto]. +******************************** + +I started with an fsck, which found a problem with exactly one object +(I've used $pack and $obj below to keep the output readable, and also +because I'll refer to them later): + +----------- + $ git fsck + error: $pack SHA1 checksum mismatch + error: index CRC mismatch for object $obj from $pack at offset 51653873 + error: inflate: data stream error (incorrect data check) + error: cannot unpack $obj from $pack at offset 51653873 +----------- + +The pack checksum failing means a byte is munged somewhere, and it is +presumably in the object mentioned (since both the index checksum and +zlib were failing). + +Reading the zlib source code, I found that "incorrect data check" means +that the adler-32 checksum at the end of the zlib data did not match the +inflated data. So stepping the data through zlib would not help, as it +did not fail until the very end, when we realize the crc does not match. +The problematic bytes could be anywhere in the object data. + +The first thing I did was pull the broken data out of the packfile. I +needed to know how big the object was, which I found out with: + +------------ + $ git show-index <$idx | cut -d' ' -f1 | sort -n | grep -A1 51653873 + 51653873 + 51664736 +------------ + +Show-index gives us the list of objects and their offsets. We throw away +everything but the offsets, and then sort them so that our interesting +offset (which we got from the fsck output above) is followed immediately +by the offset of the next object. Now we know that the object data is +10863 bytes long, and we can grab it with: + +------------ + dd if=$pack of=object bs=1 skip=51653873 count=10863 +------------ + +I inspected a hexdump of the data, looking for any obvious bogosity +(e.g., a 4K run of zeroes would be a good sign of filesystem +corruption). But everything looked pretty reasonable. + +Note that the "object" file isn't fit for feeding straight to zlib; it +has the git packed object header, which is variable-length. We want to +strip that off so we can start playing with the zlib data directly. You +can either work your way through it manually (the format is described in +link:../technical/pack-format.html[Documentation/technical/pack-format.txt]), +or you can walk through it in a debugger. I did the latter, creating a +valid pack like: + +------------ + # pack magic and version + printf 'PACK\0\0\0\2' >tmp.pack + # pack has one object + printf '\0\0\0\1' >>tmp.pack + # now add our object data + cat object >>tmp.pack + # and then append the pack trailer + /path/to/git.git/test-sha1 -b <tmp.pack >trailer + cat trailer >>tmp.pack +------------ + +and then running "git index-pack tmp.pack" in the debugger (stop at +unpack_raw_entry). Doing this, I found that there were 3 bytes of header +(and the header itself had a sane type and size). So I stripped those +off with: + +------------ + dd if=object of=zlib bs=1 skip=3 +------------ + +I ran the result through zlib's inflate using a custom C program. And +while it did report the error, I did get the right number of output +bytes (i.e., it matched git's size header that we decoded above). But +feeding the result back to "git hash-object" didn't produce the same +sha1. So there were some wrong bytes, but I didn't know which. The file +happened to be C source code, so I hoped I could notice something +obviously wrong with it, but I didn't. I even got it to compile! + +I also tried comparing it to other versions of the same path in the +repository, hoping that there would be some part of the diff that didn't +make sense. Unfortunately, this happened to be the only revision of this +particular file in the repository, so I had nothing to compare against. + +So I took a different approach. Working under the guess that the +corruption was limited to a single byte, I wrote a program to munge each +byte individually, and try inflating the result. Since the object was +only 10K compressed, that worked out to about 2.5M attempts, which took +a few minutes. + +The program I used is here: + +---------------------------------------------- +#include <stdio.h> +#include <unistd.h> +#include <string.h> +#include <signal.h> +#include <zlib.h> + +static int try_zlib(unsigned char *buf, int len) +{ + /* make this absurdly large so we don't have to loop */ + static unsigned char out[1024*1024]; + z_stream z; + int ret; + + memset(&z, 0, sizeof(z)); + inflateInit(&z); + + z.next_in = buf; + z.avail_in = len; + z.next_out = out; + z.avail_out = sizeof(out); + + ret = inflate(&z, 0); + inflateEnd(&z); + return ret >= 0; +} + +/* eye candy */ +static int counter = 0; +static void progress(int sig) +{ + fprintf(stderr, "\r%d", counter); + alarm(1); +} + +int main(void) +{ + /* oversized so we can read the whole buffer in */ + unsigned char buf[1024*1024]; + int len; + unsigned i, j; + + signal(SIGALRM, progress); + alarm(1); + + len = read(0, buf, sizeof(buf)); + for (i = 0; i < len; i++) { + unsigned char c = buf[i]; + for (j = 0; j <= 0xff; j++) { + buf[i] = j; + + counter++; + if (try_zlib(buf, len)) + printf("i=%d, j=%x\n", i, j); + } + buf[i] = c; + } + + alarm(0); + fprintf(stderr, "\n"); + return 0; +} +---------------------------------------------- + +I compiled and ran with: + +------- + gcc -Wall -Werror -O3 munge.c -o munge -lz + ./munge <zlib +------- + + +There were a few false positives early on (if you write "no data" in the +zlib header, zlib thinks it's just fine :) ). But I got a hit about +halfway through: + +------- + i=5642, j=c7 +------- + +I let it run to completion, and got a few more hits at the end (where it +was munging the crc to match our broken data). So there was a good +chance this middle hit was the source of the problem. + +I confirmed by tweaking the byte in a hex editor, zlib inflating the +result (no errors!), and then piping the output into "git hash-object", +which reported the sha1 of the broken object. Success! + +I fixed the packfile itself with: + +------- + chmod +w $pack + printf '\xc7' | dd of=$pack bs=1 seek=51659518 conv=notrunc + chmod -w $pack +------- + +The `\xc7` comes from the replacement byte our "munge" program found. +The offset 51659518 is derived by taking the original object offset +(51653873), adding the replacement offset found by "munge" (5642), and +then adding back in the 3 bytes of git header we stripped. + +After that, "git fsck" ran clean. + +As for the corruption itself, I was lucky that it was indeed a single +byte. In fact, it turned out to be a single bit. The byte 0xc7 was +corrupted to 0xc5. So presumably it was caused by faulty hardware, or a +cosmic ray. + +And the aborted attempt to look at the inflated output to see what was +wrong? I could have looked forever and never found it. Here's the diff +between what the corrupted data inflates to, versus the real data: + +-------------- + - cp = strtok (arg, "+"); + + cp = strtok (arg, "."); +-------------- + +It tweaked one byte and still ended up as valid, readable C that just +happened to do something totally different! One takeaway is that on a +less unlucky day, looking at the zlib output might have actually been +helpful, as most random changes would actually break the C code. + +But more importantly, git's hashing and checksumming noticed a problem +that easily could have gone undetected in another system. The result +still compiled, but would have caused an interesting bug (that would +have been blamed on some random commit). diff --git a/Documentation/howto/revert-a-faulty-merge.txt b/Documentation/howto/revert-a-faulty-merge.txt index 075418eeeb..acf3e477e5 100644 --- a/Documentation/howto/revert-a-faulty-merge.txt +++ b/Documentation/howto/revert-a-faulty-merge.txt @@ -37,7 +37,7 @@ where A and B are on the side development that was not so good, M is the merge that brings these premature changes into the mainline, x are changes unrelated to what the side branch did and already made on the mainline, and W is the "revert of the merge M" (doesn't W look M upside down?). -IOW, "diff W^..W" is similar to "diff -R M^..M". +IOW, `"diff W^..W"` is similar to `"diff -R M^..M"`. Such a "revert" of a merge can be made with: @@ -121,9 +121,9 @@ If you reverted the revert in such a case as in the previous example: ---A---B A'--B'--C' where Y is the revert of W, A' and B' are rerolled A and B, and there may -also be a further fix-up C' on the side branch. "diff Y^..Y" is similar -to "diff -R W^..W" (which in turn means it is similar to "diff M^..M"), -and "diff A'^..C'" by definition would be similar but different from that, +also be a further fix-up C' on the side branch. `"diff Y^..Y"` is similar +to `"diff -R W^..W"` (which in turn means it is similar to `"diff M^..M"`), +and `"diff A'^..C'"` by definition would be similar but different from that, because it is a rerolled series of the earlier change. There will be a lot of overlapping changes that result in conflicts. So do not do "revert of revert" blindly without thinking.. diff --git a/Documentation/howto/revert-branch-rebase.txt b/Documentation/howto/revert-branch-rebase.txt index 84dd839db4..85f69dbac9 100644 --- a/Documentation/howto/revert-branch-rebase.txt +++ b/Documentation/howto/revert-branch-rebase.txt @@ -12,7 +12,7 @@ How to revert an existing commit ================================ One of the changes I pulled into the 'master' branch turns out to -break building Git with GCC 2.95. While they were well intentioned +break building Git with GCC 2.95. While they were well-intentioned portability fixes, keeping things working with gcc-2.95 was also important. Here is what I did to revert the change in the 'master' branch and to adjust the 'pu' branch, using core Git tools and @@ -154,7 +154,7 @@ $ git pull . master Packing 0 objects Unpacking 0 objects -* committish: e3a693c... refs/heads/master from . +* commit-ish: e3a693c... refs/heads/master from . Trying to merge e3a693c... into 8c1f5f0... using 10d781b... Committed merge 7fb9b7262a1d1e0a47bbfdcbbcf50ce0635d3f8f cache.h | 8 ++++---- diff --git a/Documentation/howto/setup-git-server-over-http.txt b/Documentation/howto/setup-git-server-over-http.txt index 7f4943e102..6de4f3c487 100644 --- a/Documentation/howto/setup-git-server-over-http.txt +++ b/Documentation/howto/setup-git-server-over-http.txt @@ -6,6 +6,10 @@ Content-type: text/asciidoc How to setup Git server over http ================================= +NOTE: This document is from 2006. A lot has happened since then, and this +document is now relevant mainly if your web host is not CGI capable. +Almost everyone else should instead look at linkgit:git-http-backend[1]. + Since Apache is one of those packages people like to compile themselves while others prefer the bureaucrat's dream Debian, it is impossible to give guidelines which will work for everyone. Just send @@ -81,8 +85,8 @@ Initialize a bare repository $ git --bare init -Change the ownership to your web-server's credentials. Use "grep ^User -httpd.conf" and "grep ^Group httpd.conf" to find out: +Change the ownership to your web-server's credentials. Use `"grep ^User +httpd.conf"` and `"grep ^Group httpd.conf"` to find out: $ chown -R www.www . |