diff options
Diffstat (limited to 'Documentation/howto/maintain-git.txt')
| -rw-r--r-- | Documentation/howto/maintain-git.txt | 128 |
1 files changed, 79 insertions, 49 deletions
diff --git a/Documentation/howto/maintain-git.txt b/Documentation/howto/maintain-git.txt index 816c791502..a67130debb 100644 --- a/Documentation/howto/maintain-git.txt +++ b/Documentation/howto/maintain-git.txt @@ -1,7 +1,7 @@ From: Junio C Hamano <gitster@pobox.com> Date: Wed, 21 Nov 2007 16:32:55 -0800 Subject: Addendum to "MaintNotes" -Abstract: Imagine that git development is racing along as usual, when our friendly +Abstract: Imagine that Git development is racing along as usual, when our friendly neighborhood maintainer is struck down by a wayward bus. Out of the hordes of suckers (loyal developers), you have been tricked (chosen) to step up as the new maintainer. This howto will show you "how to" do it. @@ -13,7 +13,7 @@ How to maintain Git Activities ---------- -The maintainer's git time is spent on three activities. +The maintainer's Git time is spent on three activities. - Communication (45%) @@ -39,26 +39,26 @@ The policy on Integration is informally mentioned in "A Note from the maintainer" message, which is periodically posted to this mailing list after each feature release is made. - - Feature releases are numbered as vX.Y.Z and are meant to + - Feature releases are numbered as vX.Y.0 and are meant to contain bugfixes and enhancements in any area, including functionality, performance and usability, without regression. - One release cycle for a feature release is expected to last for eight to ten weeks. - - Maintenance releases are numbered as vX.Y.Z.W and are meant - to contain only bugfixes for the corresponding vX.Y.Z feature - release and earlier maintenance releases vX.Y.Z.V (V < W). + - Maintenance releases are numbered as vX.Y.Z and are meant + to contain only bugfixes for the corresponding vX.Y.0 feature + release and earlier maintenance releases vX.Y.W (W < Z). - 'master' branch is used to prepare for the next feature release. In other words, at some point, the tip of 'master' - branch is tagged with vX.Y.Z. + branch is tagged with vX.Y.0. - 'maint' branch is used to prepare for the next maintenance - release. After the feature release vX.Y.Z is made, the tip + release. After the feature release vX.Y.0 is made, the tip of 'maint' branch is set to that release, and bugfixes will accumulate on the branch, and at some point, the tip of the - branch is tagged with vX.Y.Z.1, vX.Y.Z.2, and so on. + branch is tagged with vX.Y.1, vX.Y.2, and so on. - 'next' branch is used to publish changes (both enhancements and fixes) that (1) have worthwhile goal, (2) are in a fairly @@ -66,7 +66,7 @@ this mailing list after each feature release is made. demonstrated to be regression free. New changes are tested in 'next' before merged to 'master'. - - 'pu' branch is used to publish other proposed changes that do + - 'seen' branch is used to publish other proposed changes that do not yet pass the criteria set for 'next'. - The tips of 'master' and 'maint' branches will not be rewound to @@ -76,7 +76,7 @@ this mailing list after each feature release is made. of the cycle. - Usually 'master' contains all of 'maint' and 'next' contains all - of 'master'. 'pu' contains all the topics merged to 'next', but + of 'master'. 'seen' contains all the topics merged to 'next', but is rebuilt directly on 'master'. - The tip of 'master' is meant to be more stable than any @@ -86,11 +86,15 @@ this mailing list after each feature release is made. users are encouraged to test it so that regressions and bugs are found before new topics are merged to 'master'. +Note that before v1.9.0 release, the version numbers used to be +structured slightly differently. vX.Y.Z were feature releases while +vX.Y.Z.W were maintenance releases for vX.Y.Z. + A Typical Git Day ----------------- -A typical git day for the maintainer implements the above policy +A typical Git day for the maintainer implements the above policy by doing the following: - Scan mailing list. Respond with review comments, suggestions @@ -150,15 +154,17 @@ by doing the following: - Anything unobvious that is applicable to 'master' (in other words, does not depend on anything that is still in 'next' and not in 'master') is applied to a new topic branch that - is forked from the tip of 'master'. This includes both + is forked from the tip of 'master' (or the last feature release, + which is a bit older than 'master'). This includes both enhancements and unobvious fixes to 'master'. A topic branch is named as ai/topic where "ai" is two-letter string named after author's initial and "topic" is a descriptive name of the topic (in other words, "what's the series is about"). - An unobvious fix meant for 'maint' is applied to a new - topic branch that is forked from the tip of 'maint'. The - topic is named as ai/maint-topic. + topic branch that is forked from the tip of 'maint' (or the + oldest and still relevant maintenance branch). The + topic may be named as ai/maint-topic. - Changes that pertain to an existing topic are applied to the branch, but: @@ -170,24 +176,40 @@ by doing the following: - Replacement patches to an existing topic are accepted only for commits not in 'next'. - The above except the "replacement" are all done with: + The initial round is done with: $ git checkout ai/topic ;# or "git checkout -b ai/topic master" $ git am -sc3 mailbox - while patch replacement is often done by: + and replacing an existing topic with subsequent round is done with: + + $ git checkout master...ai/topic ;# try to reapply to the same base + $ git am -sc3 mailbox + + to prepare the new round on a detached HEAD, and then - $ git format-patch ai/topic~$n..ai/topic ;# export existing + $ git range-diff @{-1}... + $ git diff @{-1} - then replace some parts with the new patch, and reapplying: + to double check what changed since the last round, and finally - $ git checkout ai/topic - $ git reset --hard ai/topic~$n - $ git am -sc3 -s 000*.txt + $ git checkout -B @{-1} + + to conclude (the last step is why a topic already in 'next' is + not replaced but updated incrementally). + + Whether it is the initial round or a subsequent round, the topic + may not build even in isolation, or may break the build when + merged to integration branches due to bugs. There may already + be obvious and trivial improvements suggested on the list. The + maintainer often adds an extra commit, with "SQUASH???" in its + title, to fix things up, before publishing the integration + branches to make it usable by other developers for testing. + These changes are what the maintainer is not 100% committed to + (trivial typofixes etc. are often squashed directly into the + patches that need fixing, without being applied as a separate + "SQUASH???" commit), so that they can be removed easily as needed. - The full test suite is always run for 'maint' and 'master' - after patch application; for topic branches the tests are run - as time permits. - Merge maint to master as needed: @@ -207,12 +229,12 @@ by doing the following: series?) - Prepare 'jch' branch, which is used to represent somewhere - between 'master' and 'pu' and often is slightly ahead of 'next'. + between 'master' and 'seen' and often is slightly ahead of 'next'. - $ Meta/Reintegrate master..pu >Meta/redo-jch.sh + $ Meta/Reintegrate master..seen >Meta/redo-jch.sh The result is a script that lists topics to be merged in order to - rebuild 'pu' as the input to Meta/Reintegrate script. Remove + rebuild 'seen' as the input to Meta/Reintegrate script. Remove later topics that should not be in 'jch' yet. Add a line that consists of '### match next' before the name of the first topic in the output that should be in 'jch' but not in 'next' yet. @@ -269,29 +291,29 @@ by doing the following: merged to 'master'. This may lose '### match next' marker; add it again to the appropriate place when it happens. - - Rebuild 'pu'. + - Rebuild 'seen'. - $ Meta/Reintegrate master..pu >Meta/redo-pu.sh + $ Meta/Reintegrate master..seen >Meta/redo-seen.sh - Edit the result by adding new topics that are not still in 'pu' + Edit the result by adding new topics that are not still in 'seen' in the script. Then - $ git checkout -B pu jch - $ sh Meta/redo-pu.sh + $ git checkout -B seen jch + $ sh Meta/redo-seen.sh - When all is well, clean up the redo-pu.sh script with + When all is well, clean up the redo-seen.sh script with - $ sh Meta/redo-pu.sh -u + $ sh Meta/redo-seen.sh -u Double check by running - $ git branch --no-merged pu + $ git branch --no-merged seen to see there is no unexpected leftover topics. At this point, build-test the result for semantic conflicts, and if there are, prepare an appropriate merge-fix first (see - appendix), and rebuild the 'pu' branch from scratch, starting at + appendix), and rebuild the 'seen' branch from scratch, starting at the tip of 'jch'. - Update "What's cooking" message to review the updates to @@ -301,14 +323,14 @@ by doing the following: $ Meta/cook - This script inspects the history between master..pu, finds tips + This script inspects the history between master..seen, finds tips of topic branches, compares what it found with the current contents in Meta/whats-cooking.txt, and updates that file. - Topics not listed in the file but are found in master..pu are + Topics not listed in the file but are found in master..seen are added to the "New topics" section, topics listed in the file that - are no longer found in master..pu are moved to the "Graduated to + are no longer found in master..seen are moved to the "Graduated to master" section, and topics whose commits changed their states - (e.g. used to be only in 'pu', now merged to 'next') are updated + (e.g. used to be only in 'seen', now merged to 'next') are updated with change markers "<<" and ">>". Look for lines enclosed in "<<" and ">>"; they hold contents from @@ -338,7 +360,7 @@ Observations Some observations to be made. * Each topic is tested individually, and also together with other - topics cooking first in 'pu', then in 'jch' and then in 'next'. + topics cooking first in 'seen', then in 'jch' and then in 'next'. Until it matures, no part of it is merged to 'master'. * A topic already in 'next' can get fixes while still in @@ -367,6 +389,14 @@ Some observations to be made. be included in the next feature release. Being in the 'master' branch typically is. + * Due to the nature of "SQUASH???" fix-ups, if the original author + agrees with the suggested changes, it is OK to squash them to + appropriate patches in the next round (when the suggested change + is small enough, the author should not even bother with + "Helped-by"). It is also OK to drop them from the next round + when the original author does not agree with the suggestion, but + the author is expected to say why somewhere in the discussion. + Appendix -------- @@ -381,7 +411,7 @@ new use of the variable under its old name. When these two topics are merged together, the reference to the variable newly added by the latter topic will still use the old name in the result. -The Meta/Reintegrate script that is used by redo-jch and redo-pu +The Meta/Reintegrate script that is used by redo-jch and redo-seen scripts implements a crude but usable way to work this issue around. When the script merges branch $X, it checks if "refs/merge-fix/$X" exists, and if so, the effect of it is squashed into the result of @@ -401,14 +431,14 @@ commit that can be squashed into a result of mechanical merge to correct semantic conflicts. After finding that the result of merging branch "ai/topic" to an -integration branch had such a semantic conflict, say pu~4, check the +integration branch had such a semantic conflict, say seen~4, check the problematic merge out on a detached HEAD, edit the working tree to fix the semantic conflict, and make a separate commit to record the fix-up: - $ git checkout pu~4 + $ git checkout seen~4 $ git show -s --pretty=%s ;# double check - Merge branch 'ai/topic' to pu + Merge branch 'ai/topic' to seen $ edit $ git commit -m 'merge-fix/ai/topic' -a @@ -420,9 +450,9 @@ result: Then double check the result by asking Meta/Reintegrate to redo the merge: - $ git checkout pu~5 ;# the parent of the problem merge + $ git checkout seen~5 ;# the parent of the problem merge $ echo ai/topic | Meta/Reintegrate - $ git diff pu~4 + $ git diff seen~4 This time, because you prepared refs/merge-fix/ai/topic, the resulting merge should have been tweaked to include the fix for the @@ -434,7 +464,7 @@ branch needs this merge-fix is because another branch merged earlier to the integration branch changed the underlying assumption ai/topic branch made (e.g. ai/topic branch added a site to refer to a variable, while the other branch renamed that variable and adjusted -existing use sites), and if you changed redo-jch (or redo-pu) script +existing use sites), and if you changed redo-jch (or redo-seen) script to merge ai/topic branch before the other branch, then the above merge-fix should not be applied while merging ai/topic, but should instead be applied while merging the other branch. You would need |