diff options
Diffstat (limited to 'Documentation/gitweb.conf.txt')
| -rw-r--r-- | Documentation/gitweb.conf.txt | 118 |
1 files changed, 90 insertions, 28 deletions
diff --git a/Documentation/gitweb.conf.txt b/Documentation/gitweb.conf.txt index 49474557d8..ebe7a6c24c 100644 --- a/Documentation/gitweb.conf.txt +++ b/Documentation/gitweb.conf.txt @@ -3,7 +3,7 @@ gitweb.conf(5) NAME ---- -gitweb.conf - Gitweb (git web interface) configuration file +gitweb.conf - Gitweb (Git web interface) configuration file SYNOPSIS -------- @@ -79,7 +79,7 @@ stops declaring it. You can include other configuration file using read_config_file() subroutine. For example, one might want to put gitweb configuration related to access control for viewing repositories via Gitolite (one -of git repository management tools) in a separate file, e.g. in +of Git repository management tools) in a separate file, e.g. in '/etc/gitweb-gitolite.conf'. To include it, put -------------------------------------------------- @@ -111,7 +111,7 @@ and installing gitweb. Location of repositories ~~~~~~~~~~~~~~~~~~~~~~~~ The configuration variables described below control how gitweb finds -git repositories, and how repositories are displayed and accessed. +Git repositories, and how repositories are displayed and accessed. See also "Repositories" and later subsections in linkgit:gitweb[1] manpage. @@ -159,7 +159,7 @@ will fall back to scanning the `$projectroot` directory for repositories. $project_maxdepth:: If `$projects_list` variable is unset, gitweb will recursively - scan filesystem for git repositories. The `$project_maxdepth` + scan filesystem for Git repositories. The `$project_maxdepth` is used to limit traversing depth, relative to `$projectroot` (starting point); it means that directories which are further from `$projectroot` than `$project_maxdepth` will be skipped. @@ -200,7 +200,7 @@ our $export_ok = "git-daemon-export-ok"; + If not set (default), it means that this feature is disabled. + -See also more involved example in "Controlling access to git repositories" +See also more involved example in "Controlling access to Git repositories" subsection on linkgit:gitweb[1] manpage. $strict_export:: @@ -222,18 +222,18 @@ The values of these variables are paths on the filesystem. $GIT:: Core git executable to use. By default set to `$GIT_BINDIR/git`, which - in turn is by default set to `$(bindir)/git`. If you use git installed + in turn is by default set to `$(bindir)/git`. If you use Git installed from a binary package, you should usually set this to "/usr/bin/git". This can just be "git" if your web server has a sensible PATH; from security point of view it is better to use absolute path to git binary. - If you have multiple git versions installed it can be used to choose + If you have multiple Git versions installed it can be used to choose which one to use. Must be (correctly) set for gitweb to be able to work. $mimetypes_file:: File to use for (filename extension based) guessing of MIME types before trying '/etc/mime.types'. *NOTE* that this path, if relative, is taken - as relative to the current git repository, not to CGI script. If unset, + as relative to the current Git repository, not to CGI script. If unset, only '/etc/mime.types' is used (if present on filesystem). If no mimetypes file is found, mimetype guessing based on extension of file is disabled. Unset by default. @@ -336,15 +336,33 @@ $home_link_str:: used as the first component of gitweb's "breadcrumb trail": `<home link> / <project> / <action>`. Can be set at build time using the `GITWEB_HOME_LINK_STR` variable. By default it is set to "projects", - as this link leads to the list of projects. Other popular choice it to - set it to the name of site. + as this link leads to the list of projects. Another popular choice is to + set it to the name of site. Note that it is treated as raw HTML so it + should not be set from untrusted sources. + +@extra_breadcrumbs:: + Additional links to be added to the start of the breadcrumb trail before + the home link, to pages that are logically "above" the gitweb projects + list, such as the organization and department which host the gitweb + server. Each element of the list is a reference to an array, in which + element 0 is the link text (equivalent to `$home_link_str`) and element + 1 is the target URL (equivalent to `$home_link`). ++ +For example, the following setting produces a breadcrumb trail like +"home / dev / projects / ..." where "projects" is the home link. +---------------------------------------------------------------------------- + our @extra_breadcrumbs = ( + [ 'home' => 'https://www.example.org/' ], + [ 'dev' => 'https://dev.example.org/' ], + ); +---------------------------------------------------------------------------- $logo_url:: $logo_label:: URI and label (title) for the Git logo link (or your site logo, if you chose to use different logo image). By default, these both - refer to git homepage, http://git-scm.com[]; in the past, they pointed - to git documentation at http://www.kernel.org[]. + refer to Git homepage, http://git-scm.com[]; in the past, they pointed + to Git documentation at http://www.kernel.org[]. Changing gitweb's look @@ -436,7 +454,7 @@ $fallback_encoding:: detection. + *Note* that rename and especially copy detection can be quite -CPU-intensive. Note also that non git tools can have problems with +CPU-intensive. Note also that non Git tools can have problems with patches generated with options mentioned above, especially when they involve file copies (\'-C') or criss-cross renames (\'-B'). @@ -451,7 +469,7 @@ looks does contain variables configuring administrative side of gitweb affects how "summary" pages look like, or load limiting). @git_base_url_list:: - List of git base URLs. These URLs are used to generate URLs + List of Git base URLs. These URLs are used to generate URLs describing from where to fetch a project, which are shown on project summary page. The full fetch URL is "`$git_base_url/$project`", for each element of this list. You can set up multiple base URLs @@ -612,13 +630,13 @@ need to set this element to empty list i.e. `[]`. override:: If this field has a true value then the given feature is - overriddable, which means that it can be configured + overridable, which means that it can be configured (or enabled/disabled) on a per-repository basis. + Usually given "<feature>" is configurable via the `gitweb.<feature>` -config variable in the per-repository git configuration file. +config variable in the per-repository Git configuration file. + -*Note* that no feature is overriddable by default. +*Note* that no feature is overridable by default. sub:: Internal detail of implementation. What is important is that @@ -782,7 +800,7 @@ filesystem (i.e. "$projectroot/$project"), `%h` to the current hash (\'hb' gitweb parameter); `%%` expands to \'%'. + For example, at the time this page was written, the http://repo.or.cz[] -git hosting site set it to the following to enable graphical log +Git hosting site set it to the following to enable graphical log (using the third party tool *git-browser*): + ---------------------------------------------------------------------- @@ -796,26 +814,26 @@ This adds a link titled "graphiclog" after the "summary" link, leading to Project specific override is not supported. timed:: - Enable displaying how much time and how many git commands it took to + Enable displaying how much time and how many Git commands it took to generate and display each page in the page footer (at the bottom of page). For example the footer might contain: "This page took 6.53325 - seconds and 13 git commands to generate." Disabled by default. + seconds and 13 Git commands to generate." Disabled by default. + Project specific override is not supported. javascript-timezone:: - Enable and configure the ability to change a common timezone for dates + Enable and configure the ability to change a common time zone for dates in gitweb output via JavaScript. Dates in gitweb output include authordate and committerdate in "commit", "commitdiff" and "log" views, and taggerdate in "tag" view. Enabled by default. + -The value is a list of three values: a default timezone (for if the client -hasn't selected some other timezone and saved it in a cookie), a name of cookie -where to store selected timezone, and a CSS class used to mark up +The value is a list of three values: a default time zone (for if the client +hasn't selected some other time zone and saved it in a cookie), a name of cookie +where to store selected time zone, and a CSS class used to mark up dates for manipulation. If you want to turn this feature off, set "default" to empty list: `[]`. + -Typical gitweb config files will only change starting (default) timezone, +Typical gitweb config files will only change starting (default) time zone, and leave other elements at their default values: + --------------------------------------------------------------------------- @@ -825,12 +843,49 @@ $feature{'javascript-timezone'}{'default'}[0] = "utc"; The example configuration presented here is guaranteed to be backwards and forward compatible. + -Timezone values can be "local" (for local timezone that browser uses), "utc" +Time zone values can be "local" (for local time zone that browser uses), "utc" (what gitweb uses when JavaScript or this feature is disabled), or numerical -timezones in the form of "+/-HHMM", such as "+0200". +time zones in the form of "+/-HHMM", such as "+0200". + Project specific override is not supported. +extra-branch-refs:: + List of additional directories under "refs" which are going to + be used as branch refs. For example if you have a gerrit setup + where all branches under refs/heads/ are official, + push-after-review ones and branches under refs/sandbox/, + refs/wip and refs/other are user ones where permissions are + much wider, then you might want to set this variable as + follows: ++ +-------------------------------------------------------------------------------- +$feature{'extra-branch-refs'}{'default'} = + ['sandbox', 'wip', 'other']; +-------------------------------------------------------------------------------- ++ +This feature can be configured on per-repository basis after setting +$feature{'extra-branch-refs'}{'override'} to true, via repository's +`gitweb.extraBranchRefs` configuration variable, which contains a +space separated list of refs. An example: ++ +-------------------------------------------------------------------------------- +[gitweb] + extraBranchRefs = sandbox wip other +-------------------------------------------------------------------------------- ++ +The gitweb.extraBranchRefs is actually a multi-valued configuration +variable, so following example is also correct and the result is the +same as of the snippet above: ++ +-------------------------------------------------------------------------------- +[gitweb] + extraBranchRefs = sandbox + extraBranchRefs = wip other +-------------------------------------------------------------------------------- ++ +It is an error to specify a ref that does not pass "git check-ref-format" +scrutiny. Duplicated values are filtered. + EXAMPLES -------- @@ -849,7 +904,7 @@ the following in your GITWEB_CONFIG file: $feature{'snapshot'}{'override'} = 1; If you allow overriding for the snapshot feature, you can specify which -snapshot formats are globally disabled. You can also add any command line +snapshot formats are globally disabled. You can also add any command-line options you want (such as setting the compression level). For instance, you can disable Zip compressed snapshots and set *gzip*(1) to run at level 6 by adding the following lines to your gitweb configuration file: @@ -857,6 +912,13 @@ adding the following lines to your gitweb configuration file: $known_snapshot_formats{'zip'}{'disabled'} = 1; $known_snapshot_formats{'tgz'}{'compressor'} = ['gzip','-6']; +BUGS +---- +Debugging would be easier if the fallback configuration file +(`/etc/gitweb.conf`) and environment variable to override its location +('GITWEB_CONFIG_SYSTEM') had names reflecting their "fallback" role. +The current names are kept to avoid breaking working setups. + ENVIRONMENT ----------- The location of per-instance and system-wide configuration files can be |