diff options
Diffstat (limited to 'Documentation/gitattributes.txt')
| -rw-r--r-- | Documentation/gitattributes.txt | 294 |
1 files changed, 244 insertions, 50 deletions
diff --git a/Documentation/gitattributes.txt b/Documentation/gitattributes.txt index e3b1de8033..1094fe2b5b 100644 --- a/Documentation/gitattributes.txt +++ b/Documentation/gitattributes.txt @@ -21,9 +21,11 @@ Each line in `gitattributes` file is of form: pattern attr1 attr2 ... That is, a pattern followed by an attributes list, -separated by whitespaces. When the pattern matches the -path in question, the attributes listed on the line are given to -the path. +separated by whitespaces. Leading and trailing whitespaces are +ignored. Lines that begin with '#' are ignored. Patterns +that begin with a double quote are quoted in C style. +When the pattern matches the path in question, the attributes +listed on the line are given to the path. Each attribute can be in one of these states for a given path: @@ -54,9 +56,16 @@ Unspecified:: When more than one pattern matches the path, a later line overrides an earlier line. This overriding is done per -attribute. The rules how the pattern matches paths are the -same as in `.gitignore` files; see linkgit:gitignore[5]. -Unlike `.gitignore`, negative patterns are forbidden. +attribute. + +The rules by which the pattern matches paths are the same as in +`.gitignore` files (see linkgit:gitignore[5]), with a few exceptions: + + - negative patterns are forbidden + + - patterns that match a directory do not recursively match paths + inside that directory (so using the trailing-slash `path/` syntax is + pointless in an attributes file; use `path/**` instead) When deciding what attributes are assigned to a path, Git consults `$GIT_DIR/info/attributes` file (which has the highest @@ -86,7 +95,7 @@ is either not set or empty, $HOME/.config/git/attributes is used instead. Attributes for all users on a system should be placed in the `$(prefix)/etc/gitattributes` file. -Sometimes you would need to override an setting of an attribute +Sometimes you would need to override a setting of an attribute for a path to `Unspecified` state. This can be done by listing the name of the attribute prefixed with an exclamation point `!`. @@ -115,6 +124,7 @@ text file is normalized, its line endings are converted to LF in the repository. To control what line ending style is used in the working directory, use the `eol` attribute for a single file and the `core.eol` configuration variable for all text files. +Note that `core.autocrlf` overrides `core.eol` Set:: @@ -130,8 +140,9 @@ Unset:: Set to string value "auto":: When `text` is set to "auto", the path is marked for automatic - end-of-line normalization. If Git decides that the content is - text, its line endings are normalized to LF on checkin. + end-of-line conversion. If Git decides that the content is + text, its line endings are converted to LF on checkin. + When the file has been committed with CRLF, no conversion is done. Unspecified:: @@ -146,8 +157,11 @@ unspecified. ^^^^^ This attribute sets a specific line-ending style to be used in the -working directory. It enables end-of-line normalization without any -content checks, effectively setting the `text` attribute. +working directory. It enables end-of-line conversion without any +content checks, effectively setting the `text` attribute. Note that +setting this attribute on paths which are in the index with CRLF line +endings may make the paths to be considered dirty. Adding the path to +the index again will normalize the line endings in the index. Set to string value "crlf":: @@ -180,65 +194,53 @@ While Git normally leaves file contents alone, it can be configured to normalize line endings to LF in the repository and, optionally, to convert them to CRLF when files are checked out. -Here is an example that will make Git normalize .txt, .vcproj and .sh -files, ensure that .vcproj files have CRLF and .sh files have LF in -the working directory, and prevent .jpg files from being normalized -regardless of their content. - ------------------------- -*.txt text -*.vcproj eol=crlf -*.sh eol=lf -*.jpg -text ------------------------- - -Other source code management systems normalize all text files in their -repositories, and there are two ways to enable similar automatic -normalization in Git. - If you simply want to have CRLF line endings in your working directory regardless of the repository you are working with, you can set the -config variable "core.autocrlf" without changing any attributes. +config variable "core.autocrlf" without using any attributes. ------------------------ [core] autocrlf = true ------------------------ -This does not force normalization of all text files, but does ensure +This does not force normalization of text files, but does ensure that text files that you introduce to the repository have their line endings normalized to LF when they are added, and that files that are already normalized in the repository stay normalized. -If you want to interoperate with a source code management system that -enforces end-of-line normalization, or you simply want all text files -in your repository to be normalized, you should instead set the `text` -attribute to "auto" for _all_ files. +If you want to ensure that text files that any contributor introduces to +the repository have their line endings normalized, you can set the +`text` attribute to "auto" for _all_ files. ------------------------ * text=auto ------------------------ -This ensures that all files that Git considers to be text will have -normalized (LF) line endings in the repository. The `core.eol` -configuration variable controls which line endings Git will use for -normalized files in your working directory; the default is to use the -native line ending for your platform, or CRLF if `core.autocrlf` is -set. +The attributes allow a fine-grained control, how the line endings +are converted. +Here is an example that will make Git normalize .txt, .vcproj and .sh +files, ensure that .vcproj files have CRLF and .sh files have LF in +the working directory, and prevent .jpg files from being normalized +regardless of their content. + +------------------------ +* text=auto +*.txt text +*.vcproj text eol=crlf +*.sh text eol=lf +*.jpg -text +------------------------ + +NOTE: When `text=auto` conversion is enabled in a cross-platform +project using push and pull to a central repository the text files +containing CRLFs should be normalized. -NOTE: When `text=auto` normalization is enabled in an existing -repository, any text files containing CRLFs should be normalized. If -they are not they will be normalized the next time someone tries to -change them, causing unfortunate misattribution. From a clean working -directory: +From a clean working directory: ------------------------------------------------- -$ echo "* text=auto" >>.gitattributes -$ rm .git/index # Remove the index to force Git to -$ git reset # re-scan the working directory +$ echo "* text=auto" >.gitattributes +$ git add --renormalize . $ git status # Show files that will be normalized -$ git add -u -$ git add .gitattributes $ git commit -m "Introduce end-of-line normalization" ------------------------------------------------- @@ -300,7 +302,15 @@ checkout, when the `smudge` command is specified, the command is fed the blob object from its standard input, and its standard output is used to update the worktree file. Similarly, the `clean` command is used to convert the contents of worktree file -upon checkin. +upon checkin. By default these commands process only a single +blob and terminate. If a long running `process` filter is used +in place of `clean` and/or `smudge` filters, then Git can process +all blobs with a single filter command invocation for the entire +life of a single Git command, for example `git add --all`. If a +long running `process` filter is configured then it always takes +precedence over a configured single blob filter. See section +below for the description of the protocol used to communicate with +a `process` filter. One use of the content filtering is to massage the content into a shape that is more convenient for the platform, filesystem, and the user to use. @@ -324,6 +334,9 @@ You can declare that a filter turns a content that by itself is unusable into a usable content by setting the filter.<driver>.required configuration variable to `true`. +Note: Whenever the clean filter is changed, the repo should be renormalized: +$ git add --renormalize . + For example, in .gitattributes, you would assign the `filter` attribute for paths. @@ -374,6 +387,183 @@ substitution. For example: smudge = git-p4-filter --smudge %f ------------------------ +Note that "%f" is the name of the path that is being worked on. Depending +on the version that is being filtered, the corresponding file on disk may +not exist, or may have different contents. So, smudge and clean commands +should not try to access the file on disk, but only act as filters on the +content provided to them on standard input. + +Long Running Filter Process +^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +If the filter command (a string value) is defined via +`filter.<driver>.process` then Git can process all blobs with a +single filter invocation for the entire life of a single Git +command. This is achieved by using the long-running process protocol +(described in technical/long-running-process-protocol.txt). + +When Git encounters the first file that needs to be cleaned or smudged, +it starts the filter and performs the handshake. In the handshake, the +welcome message sent by Git is "git-filter-client", only version 2 is +suppported, and the supported capabilities are "clean", "smudge", and +"delay". + +Afterwards Git sends a list of "key=value" pairs terminated with +a flush packet. The list will contain at least the filter command +(based on the supported capabilities) and the pathname of the file +to filter relative to the repository root. Right after the flush packet +Git sends the content split in zero or more pkt-line packets and a +flush packet to terminate content. Please note, that the filter +must not send any response before it received the content and the +final flush packet. Also note that the "value" of a "key=value" pair +can contain the "=" character whereas the key would never contain +that character. +------------------------ +packet: git> command=smudge +packet: git> pathname=path/testfile.dat +packet: git> 0000 +packet: git> CONTENT +packet: git> 0000 +------------------------ + +The filter is expected to respond with a list of "key=value" pairs +terminated with a flush packet. If the filter does not experience +problems then the list must contain a "success" status. Right after +these packets the filter is expected to send the content in zero +or more pkt-line packets and a flush packet at the end. Finally, a +second list of "key=value" pairs terminated with a flush packet +is expected. The filter can change the status in the second list +or keep the status as is with an empty list. Please note that the +empty list must be terminated with a flush packet regardless. + +------------------------ +packet: git< status=success +packet: git< 0000 +packet: git< SMUDGED_CONTENT +packet: git< 0000 +packet: git< 0000 # empty list, keep "status=success" unchanged! +------------------------ + +If the result content is empty then the filter is expected to respond +with a "success" status and a flush packet to signal the empty content. +------------------------ +packet: git< status=success +packet: git< 0000 +packet: git< 0000 # empty content! +packet: git< 0000 # empty list, keep "status=success" unchanged! +------------------------ + +In case the filter cannot or does not want to process the content, +it is expected to respond with an "error" status. +------------------------ +packet: git< status=error +packet: git< 0000 +------------------------ + +If the filter experiences an error during processing, then it can +send the status "error" after the content was (partially or +completely) sent. +------------------------ +packet: git< status=success +packet: git< 0000 +packet: git< HALF_WRITTEN_ERRONEOUS_CONTENT +packet: git< 0000 +packet: git< status=error +packet: git< 0000 +------------------------ + +In case the filter cannot or does not want to process the content +as well as any future content for the lifetime of the Git process, +then it is expected to respond with an "abort" status at any point +in the protocol. +------------------------ +packet: git< status=abort +packet: git< 0000 +------------------------ + +Git neither stops nor restarts the filter process in case the +"error"/"abort" status is set. However, Git sets its exit code +according to the `filter.<driver>.required` flag, mimicking the +behavior of the `filter.<driver>.clean` / `filter.<driver>.smudge` +mechanism. + +If the filter dies during the communication or does not adhere to +the protocol then Git will stop the filter process and restart it +with the next file that needs to be processed. Depending on the +`filter.<driver>.required` flag Git will interpret that as error. + +Delay +^^^^^ + +If the filter supports the "delay" capability, then Git can send the +flag "can-delay" after the filter command and pathname. This flag +denotes that the filter can delay filtering the current blob (e.g. to +compensate network latencies) by responding with no content but with +the status "delayed" and a flush packet. +------------------------ +packet: git> command=smudge +packet: git> pathname=path/testfile.dat +packet: git> can-delay=1 +packet: git> 0000 +packet: git> CONTENT +packet: git> 0000 +packet: git< status=delayed +packet: git< 0000 +------------------------ + +If the filter supports the "delay" capability then it must support the +"list_available_blobs" command. If Git sends this command, then the +filter is expected to return a list of pathnames representing blobs +that have been delayed earlier and are now available. +The list must be terminated with a flush packet followed +by a "success" status that is also terminated with a flush packet. If +no blobs for the delayed paths are available, yet, then the filter is +expected to block the response until at least one blob becomes +available. The filter can tell Git that it has no more delayed blobs +by sending an empty list. As soon as the filter responds with an empty +list, Git stops asking. All blobs that Git has not received at this +point are considered missing and will result in an error. + +------------------------ +packet: git> command=list_available_blobs +packet: git> 0000 +packet: git< pathname=path/testfile.dat +packet: git< pathname=path/otherfile.dat +packet: git< 0000 +packet: git< status=success +packet: git< 0000 +------------------------ + +After Git received the pathnames, it will request the corresponding +blobs again. These requests contain a pathname and an empty content +section. The filter is expected to respond with the smudged content +in the usual way as explained above. +------------------------ +packet: git> command=smudge +packet: git> pathname=path/testfile.dat +packet: git> 0000 +packet: git> 0000 # empty content! +packet: git< status=success +packet: git< 0000 +packet: git< SMUDGED_CONTENT +packet: git< 0000 +packet: git< 0000 # empty list, keep "status=success" unchanged! +------------------------ + +Example +^^^^^^^ + +A long running filter demo implementation can be found in +`contrib/long-running-filter/example.pl` located in the Git +core repository. If you develop your own long running filter +process then the `GIT_TRACE_PACKET` environment variables can be +very helpful for debugging (see linkgit:git[1]). + +Please note that you cannot use an existing `filter.<driver>.clean` +or `filter.<driver>.smudge` command with `filter.<driver>.process` +because the former two use a different inter process communication +protocol than the latter one. + Interaction between checkin/checkout attributes ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ @@ -525,10 +715,14 @@ patterns are available: - `csharp` suitable for source code in the C# language. +- `css` suitable for cascading style sheets. + - `fortran` suitable for source code in the Fortran language. - `fountain` suitable for Fountain documents. +- `golang` suitable for source code in the Go language. + - `html` suitable for HTML/XHTML documents. - `java` suitable for source code in the Java language. |