diff options
Diffstat (limited to 'Documentation/gitattributes.txt')
| -rw-r--r-- | Documentation/gitattributes.txt | 444 |
1 files changed, 366 insertions, 78 deletions
diff --git a/Documentation/gitattributes.txt b/Documentation/gitattributes.txt index 8b90a5b980..d892e642ed 100644 --- a/Documentation/gitattributes.txt +++ b/Documentation/gitattributes.txt @@ -7,7 +7,7 @@ gitattributes - defining attributes per path SYNOPSIS -------- -$GIT_DIR/info/attributes, gitattributes +$GIT_DIR/info/attributes, .gitattributes DESCRIPTION @@ -18,10 +18,10 @@ A `gitattributes` file is a simple text file that gives Each line in `gitattributes` file is of form: - glob attr1 attr2 ... + pattern attr1 attr2 ... -That is, a glob pattern followed by an attributes list, -separated by whitespaces. When the glob pattern matches the +That is, a pattern followed by an attributes list, +separated by whitespaces. When the pattern matches the path in question, the attributes listed on the line are given to the path. @@ -48,20 +48,28 @@ Set to a value:: Unspecified:: - No glob pattern matches the path, and nothing says if + No pattern matches the path, and nothing says if the path has or does not have the attribute, the attribute for the path is said to be Unspecified. -When more than one glob pattern matches the path, a later line +When more than one pattern matches the path, a later line overrides an earlier line. This overriding is done per -attribute. +attribute. The rules how the pattern matches paths are the +same as in `.gitignore` files; see linkgit:gitignore[5]. When deciding what attributes are assigned to a path, git consults `$GIT_DIR/info/attributes` file (which has the highest precedence), `.gitattributes` file in the same directory as the -path in question, and its parent directories (the further the -directory that contains `.gitattributes` is from the path in -question, the lower its precedence). +path in question, and its parent directories up to the toplevel of the +work tree (the further the directory that contains `.gitattributes` +is from the path in question, the lower its precedence). + +If you wish to affect only a single repository (i.e., to assign +attributes to files that are particular to one user's workflow), then +attributes should be placed in the `$GIT_DIR/info/attributes` file. +Attributes which should be version-controlled and distributed to other +repositories (i.e., attributes of interest to all users) should go into +`.gitattributes` files. Sometimes you would need to override an setting of an attribute for a path to `unspecified` state. This can be done by listing @@ -80,9 +88,9 @@ Checking-out and checking-in These attributes affect how the contents stored in the repository are copied to the working tree files when commands -such as `git checkout` and `git merge` run. They also affect how +such as 'git checkout' and 'git merge' run. They also affect how git stores the contents you prepare in the working tree in the -repository upon `git add` and `git commit`. +repository upon 'git add' and 'git commit'. `crlf` ^^^^^^ @@ -98,9 +106,8 @@ Set:: Unset:: - Unsetting the `crlf` attribute on a path is meant to - mark the path as a "binary" file. The path never goes - through line endings conversion upon checkin/checkout. + Unsetting the `crlf` attribute on a path tells git not to + attempt any end-of-line conversion upon checkin or checkout. Unspecified:: @@ -133,53 +140,81 @@ When `core.autocrlf` is set to "input", line endings are converted to LF upon checkin, but there is no conversion done upon checkout. +If `core.safecrlf` is set to "true" or "warn", git verifies if +the conversion is reversible for the current setting of +`core.autocrlf`. For "true", git rejects irreversible +conversions; for "warn", git only prints a warning but accepts +an irreversible conversion. The safety triggers to prevent such +a conversion done to the files in the work tree, but there are a +few exceptions. Even though... + +- 'git add' itself does not touch the files in the work tree, the + next checkout would, so the safety triggers; + +- 'git apply' to update a text file with a patch does touch the files + in the work tree, but the operation is about text files and CRLF + conversion is about fixing the line ending inconsistencies, so the + safety does not trigger; + +- 'git diff' itself does not touch the files in the work tree, it is + often run to inspect the changes you intend to next 'git add'. To + catch potential problems early, safety triggers. + `ident` ^^^^^^^ -When the attribute `ident` is set to a path, git replaces -`$Id$` in the blob object with `$Id:`, followed by +When the attribute `ident` is set for a path, git replaces +`$Id$` in the blob object with `$Id:`, followed by the 40-character hexadecimal blob object name, followed by a dollar sign `$` upon checkout. Any byte sequence that begins with `$Id:` and ends with `$` in the worktree file is replaced with `$Id$` upon check-in. -Interaction between checkin/checkout attributes -^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ - -In the check-in codepath, the worktree file is first converted -with `ident` (if specified), and then with `crlf` (again, if -specified and applicable). - -In the check-out codepath, the blob content is first converted -with `crlf`, and then `ident`. - - `filter` ^^^^^^^^ -A `filter` attribute can be set to a string value. This names +A `filter` attribute can be set to a string value that names a filter driver specified in the configuration. -A filter driver consists of `clean` command and `smudge` +A filter driver consists of a `clean` command and a `smudge` command, either of which can be left unspecified. Upon -checkout, when `smudge` command is specified, the command is fed -the blob object from its standard input, and its standard output -is used to update the worktree file. Similarly, `clean` command -is used to convert the contents of worktree file upon checkin. +checkout, when the `smudge` command is specified, the command is +fed the blob object from its standard input, and its standard +output is used to update the worktree file. Similarly, the +`clean` command is used to convert the contents of worktree file +upon checkin. -Missing filter driver definition in the config is not an error +A missing filter driver definition in the config is not an error but makes the filter a no-op passthru. The content filtering is done to massage the content into a shape that is more convenient for the platform, filesystem, and -the user to use. The keyword here is "more convenient" and not -"turning something unusable into usable". In other words, it is -"hanging yourself because we gave you a long rope" if your -project uses filtering mechanism in such a way that it makes -your project unusable unless the checkout is done with a -specific filter in effect. +the user to use. The key phrase here is "more convenient" and not +"turning something unusable into usable". In other words, the +intent is that if someone unsets the filter driver definition, +or does not have the appropriate filter program, the project +should still be usable. + +For example, in .gitattributes, you would assign the `filter` +attribute for paths. + +------------------------ +*.c filter=indent +------------------------ + +Then you would define a "filter.indent.clean" and "filter.indent.smudge" +configuration in your .git/config to specify a pair of commands to +modify the contents of C programs when the source files are checked +in ("clean" is run) and checked out (no change is made because the +command is "cat"). + +------------------------ +[filter "indent"] + clean = indent + smudge = cat +------------------------ Interaction between checkin/checkout attributes @@ -198,10 +233,15 @@ with `crlf`, and then `ident` and fed to `filter`. Generating diff text ~~~~~~~~~~~~~~~~~~~~ -The attribute `diff` affects if `git diff` generates textual -patch for the path or just says `Binary files differ`. It also -can affect what line is shown on the hunk header `@@ -k,l +n,m @@` -line. +`diff` +^^^^^^ + +The attribute `diff` affects how 'git' generates diffs for particular +files. It can tell git whether to generate a textual patch for the path +or to treat the path as a binary file. It can also affect what line is +shown on the hunk header `@@ -k,l +n,m @@` line, tell git to use an +external command to generate the diff, or ask git to convert binary +files to a text format before generating the diff. Set:: @@ -212,7 +252,8 @@ Set:: Unset:: A path to which the `diff` attribute is unset will - generate `Binary files differ`. + generate `Binary files differ` (or a binary patch, if + binary patches are enabled). Unspecified:: @@ -223,21 +264,21 @@ Unspecified:: String:: - Diff is shown using the specified custom diff driver. - The driver program is given its input using the same - calling convention as used for GIT_EXTERNAL_DIFF - program. This name is also used for custom hunk header - selection. + Diff is shown using the specified diff driver. Each driver may + specify one or more options, as described in the following + section. The options for the diff driver "foo" are defined + by the configuration variables in the "diff.foo" section of the + git config file. -Defining a custom diff driver -^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Defining an external diff driver +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ The definition of a diff driver is done in `gitconfig`, not `gitattributes` file, so strictly speaking this manual page is a wrong place to talk about it. However... -To define a custom diff driver `jcdiff`, add a section to your +To define an external diff driver `jcdiff`, add a section to your `$GIT_DIR/config` file (or `$HOME/.gitconfig` file) like this: ---------------------------------------------------------------- @@ -249,64 +290,145 @@ When git needs to show you a diff for the path with `diff` attribute set to `jcdiff`, it calls the command you specified with the above configuration, i.e. `j-c-diff`, with 7 parameters, just like `GIT_EXTERNAL_DIFF` program is called. -See gitlink:git[7] for details. +See linkgit:git[1] for details. Defining a custom hunk-header ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ -Each group of changes (called "hunk") in the textual diff output +Each group of changes (called a "hunk") in the textual diff output is prefixed with a line of the form: @@ -k,l +n,m @@ TEXT -The text is called 'hunk header', and by default a line that -begins with an alphabet, an underscore or a dollar sign is used, -which matches what GNU `diff -p` output uses. This default -selection however is not suited for some contents, and you can -use customized pattern to make a selection. +This is called a 'hunk header'. The "TEXT" portion is by default a line +that begins with an alphabet, an underscore or a dollar sign; this +matches what GNU 'diff -p' output uses. This default selection however +is not suited for some contents, and you can use a customized pattern +to make a selection. -First in .gitattributes, you would assign the `diff` attribute +First, in .gitattributes, you would assign the `diff` attribute for paths. ------------------------ *.tex diff=tex ------------------------ -Then, you would define "diff.tex.funcname" configuration to +Then, you would define a "diff.tex.xfuncname" configuration to specify a regular expression that matches a line that you would -want to appear as the hunk header, like this: +want to appear as the hunk header "TEXT". Add a section to your +`$GIT_DIR/config` file (or `$HOME/.gitconfig` file) like this: ------------------------ [diff "tex"] - funcname = "^\\(\\\\\\(sub\\)*section{.*\\)$" + xfuncname = "^(\\\\(sub)*section\\{.*)$" ------------------------ Note. A single level of backslashes are eaten by the configuration file parser, so you would need to double the backslashes; the pattern above picks a line that begins with a -backslash, and zero or more occurences of `sub` followed by +backslash, and zero or more occurrences of `sub` followed by `section` followed by open brace, to the end of line. There are a few built-in patterns to make this easier, and `tex` is one of them, so you do not have to write the above in your configuration file (you still need to enable this with the -attribute mechanism, via `.gitattributes`). Another built-in -pattern is defined for `java` that defines a pattern suitable -for program text in Java language. +attribute mechanism, via `.gitattributes`). The following built in +patterns are available: + +- `bibtex` suitable for files with BibTeX coded references. + +- `cpp` suitable for source code in the C and C++ languages. + +- `html` suitable for HTML/XHTML documents. + +- `java` suitable for source code in the Java language. + +- `objc` suitable for source code in the Objective-C language. + +- `pascal` suitable for source code in the Pascal/Delphi language. + +- `php` suitable for source code in the PHP language. + +- `python` suitable for source code in the Python language. + +- `ruby` suitable for source code in the Ruby language. + +- `tex` suitable for source code for LaTeX documents. + + +Customizing word diff +^^^^^^^^^^^^^^^^^^^^^ + +You can customize the rules that `git diff --color-words` uses to +split words in a line, by specifying an appropriate regular expression +in the "diff.*.wordRegex" configuration variable. For example, in TeX +a backslash followed by a sequence of letters forms a command, but +several such commands can be run together without intervening +whitespace. To separate them, use a regular expression in your +`$GIT_DIR/config` file (or `$HOME/.gitconfig` file) like this: + +------------------------ +[diff "tex"] + wordRegex = "\\\\[a-zA-Z]+|[{}]|\\\\.|[^\\{}[:space:]]+" +------------------------ + +A built-in pattern is provided for all languages listed in the +previous section. + + +Performing text diffs of binary files +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Sometimes it is desirable to see the diff of a text-converted +version of some binary files. For example, a word processor +document can be converted to an ASCII text representation, and +the diff of the text shown. Even though this conversion loses +some information, the resulting diff is useful for human +viewing (but cannot be applied directly). + +The `textconv` config option is used to define a program for +performing such a conversion. The program should take a single +argument, the name of a file to convert, and produce the +resulting text on stdout. + +For example, to show the diff of the exif information of a +file instead of the binary information (assuming you have the +exif tool installed), add the following section to your +`$GIT_DIR/config` file (or `$HOME/.gitconfig` file): + +------------------------ +[diff "jpg"] + textconv = exif +------------------------ + +NOTE: The text conversion is generally a one-way conversion; +in this example, we lose the actual image contents and focus +just on the text data. This means that diffs generated by +textconv are _not_ suitable for applying. For this reason, +only `git diff` and the `git log` family of commands (i.e., +log, whatchanged, show) will perform text conversion. `git +format-patch` will never generate this output. If you want to +send somebody a text-converted diff of a binary file (e.g., +because it quickly conveys the changes you have made), you +should generate it separately and send it as a comment _in +addition to_ the usual binary diff that you might send. Performing a three-way merge ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +`merge` +^^^^^^^ + The attribute `merge` affects how three versions of a file is merged when a file-level merge is necessary during `git merge`, -and other programs such as `git revert` and `git cherry-pick`. +and other commands such as `git revert` and `git cherry-pick`. Set:: Built-in 3-way merge driver is used to merge the - contents in a way similar to `merge` command of `RCS` + contents in a way similar to 'merge' command of `RCS` suite. This is suitable for ordinary text files. Unset:: @@ -333,12 +455,43 @@ String:: requested with "binary". +Built-in merge drivers +^^^^^^^^^^^^^^^^^^^^^^ + +There are a few built-in low-level merge drivers defined that +can be asked for via the `merge` attribute. + +text:: + + Usual 3-way file level merge for text files. Conflicted + regions are marked with conflict markers `<<<<<<<`, + `=======` and `>>>>>>>`. The version from your branch + appears before the `=======` marker, and the version + from the merged branch appears after the `=======` + marker. + +binary:: + + Keep the version from your branch in the work tree, but + leave the path in the conflicted state for the user to + sort out. + +union:: + + Run 3-way file level merge for text files, but take + lines from both versions, instead of leaving conflict + markers. This tends to leave the added lines in the + resulting file in random order and the user should + verify the result. Do not use this if you do not + understand the implications. + + Defining a custom merge driver ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ -The definition of a merge driver is done in `gitconfig` not -`gitattributes` file, so strictly speaking this manual page is a -wrong place to talk about it. However... +The definition of a merge driver is done in the `.git/config` +file, not in the `gitattributes` file, so strictly speaking this +manual page is a wrong place to talk about it. However... To define a custom merge driver `filfre`, add a section to your `$GIT_DIR/config` file (or `$HOME/.gitconfig` file) like this: @@ -358,7 +511,8 @@ command to run to merge ancestor's version (`%O`), current version (`%A`) and the other branches' version (`%B`). These three tokens are replaced with the names of temporary files that hold the contents of these versions when the command line is -built. +built. Additionally, %L will be replaced with the conflict marker +size (see below). The merge driver is expected to leave the result of the merge in the file named with `%A` by overwriting it, and exit with zero @@ -372,6 +526,139 @@ When left unspecified, the driver itself is used for both internal merge and the final merge. +`conflict-marker-size` +^^^^^^^^^^^^^^^^^^^^^^ + +This attribute controls the length of conflict markers left in +the work tree file during a conflicted merge. Only setting to +the value to a positive integer has any meaningful effect. + +For example, this line in `.gitattributes` can be used to tell the merge +machinery to leave much longer (instead of the usual 7-character-long) +conflict markers when merging the file `Documentation/git-merge.txt` +results in a conflict. + +------------------------ +Documentation/git-merge.txt conflict-marker-size=32 +------------------------ + + +Checking whitespace errors +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +`whitespace` +^^^^^^^^^^^^ + +The `core.whitespace` configuration variable allows you to define what +'diff' and 'apply' should consider whitespace errors for all paths in +the project (See linkgit:git-config[1]). This attribute gives you finer +control per path. + +Set:: + + Notice all types of potential whitespace errors known to git. + +Unset:: + + Do not notice anything as error. + +Unspecified:: + + Use the value of `core.whitespace` configuration variable to + decide what to notice as error. + +String:: + + Specify a comma separate list of common whitespace problems to + notice in the same format as `core.whitespace` configuration + variable. + + +Creating an archive +~~~~~~~~~~~~~~~~~~~ + +`export-ignore` +^^^^^^^^^^^^^^^ + +Files and directories with the attribute `export-ignore` won't be added to +archive files. + +`export-subst` +^^^^^^^^^^^^^^ + +If the attribute `export-subst` is set for a file then git will expand +several placeholders when adding this file to an archive. The +expansion depends on the availability of a commit ID, i.e., if +linkgit:git-archive[1] has been given a tree instead of a commit or a +tag then no replacement will be done. The placeholders are the same +as those for the option `--pretty=format:` of linkgit:git-log[1], +except that they need to be wrapped like this: `$Format:PLACEHOLDERS$` +in the file. E.g. the string `$Format:%H$` will be replaced by the +commit hash. + + +Packing objects +~~~~~~~~~~~~~~~ + +`delta` +^^^^^^^ + +Delta compression will not be attempted for blobs for paths with the +attribute `delta` set to false. + + +Viewing files in GUI tools +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +`encoding` +^^^^^^^^^^ + +The value of this attribute specifies the character encoding that should +be used by GUI tools (e.g. linkgit:gitk[1] and linkgit:git-gui[1]) to +display the contents of the relevant file. Note that due to performance +considerations linkgit:gitk[1] does not use this attribute unless you +manually enable per-file encodings in its options. + +If this attribute is not set or has an invalid value, the value of the +`gui.encoding` configuration variable is used instead +(See linkgit:git-config[1]). + + +USING ATTRIBUTE MACROS +---------------------- + +You do not want any end-of-line conversions applied to, nor textual diffs +produced for, any binary file you track. You would need to specify e.g. + +------------ +*.jpg -crlf -diff +------------ + +but that may become cumbersome, when you have many attributes. Using +attribute macros, you can specify groups of attributes set or unset at +the same time. The system knows a built-in attribute macro, `binary`: + +------------ +*.jpg binary +------------ + +which is equivalent to the above. Note that the attribute macros can only +be "Set" (see the above example that sets "binary" macro as if it were an +ordinary attribute --- setting it in turn unsets "crlf" and "diff"). + + +DEFINING ATTRIBUTE MACROS +------------------------- + +Custom attribute macros can be defined only in the `.gitattributes` file +at the toplevel (i.e. not in any subdirectory). The built-in attribute +macro "binary" is equivalent to: + +------------ +[attr]binary -diff -crlf +------------ + + EXAMPLE ------- @@ -394,7 +681,7 @@ abc -foo -bar the attributes given to path `t/abc` are computed as follows: 1. By examining `t/.gitattributes` (which is in the same - diretory as the path in question), git finds that the first + directory as the path in question), git finds that the first line matches. `merge` attribute is set. It also finds that the second line matches, and attributes `foo` and `bar` are unset. @@ -410,7 +697,7 @@ the attributes given to path `t/abc` are computed as follows: a match, and `foo` is set, `bar` is reverted to unspecified state, and `baz` is unset. -As the result, the attributes assignement to `t/abc` becomes: +As the result, the attributes assignment to `t/abc` becomes: ---------------------------------------------------------------- foo set to true @@ -421,6 +708,7 @@ frotz unspecified ---------------------------------------------------------------- + GIT --- -Part of the gitlink:git[7] suite +Part of the linkgit:git[1] suite |