diff options
Diffstat (limited to 'Documentation/git.txt')
| -rw-r--r-- | Documentation/git.txt | 301 |
1 files changed, 264 insertions, 37 deletions
diff --git a/Documentation/git.txt b/Documentation/git.txt index 4c4d1746e0..b4c2bcc45b 100644 --- a/Documentation/git.txt +++ b/Documentation/git.txt @@ -1,4 +1,4 @@ -git(7) +git(1) ====== NAME @@ -9,7 +9,8 @@ git - the stupid content tracker SYNOPSIS -------- [verse] -'git' [--version] [--exec-path[=GIT_EXEC_PATH]] [-p|--paginate] +'git' [--version] [--exec-path[=GIT_EXEC_PATH]] [--html-path] + [-p|--paginate|--no-pager] [--no-replace-objects] [--bare] [--git-dir=GIT_DIR] [--work-tree=GIT_WORK_TREE] [--help] COMMAND [ARGS] @@ -19,15 +20,15 @@ Git is a fast, scalable, distributed revision control system with an unusually rich command set that provides both high-level operations and full access to internals. -See this link:tutorial.html[tutorial] to get started, then see +See linkgit:gittutorial[7] to get started, then see link:everyday.html[Everyday Git] for a useful minimum set of commands, and "man git-commandname" for documentation of each command. CVS users may -also want to read link:cvs-migration.html[CVS migration]. See -link:user-manual.html[Git User's Manual] for a more in-depth +also want to read linkgit:gitcvs-migration[7]. See +the link:user-manual.html[Git User's Manual] for a more in-depth introduction. The COMMAND is either a name of a Git command (see below) or an alias -as defined in the configuration file (see gitlink:git-config[1]). +as defined in the configuration file (see linkgit:git-config[1]). Formatted and hyperlinked version of the latest git documentation can be viewed at @@ -42,9 +43,122 @@ unreleased) version of git, that is available from 'master' branch of the `git.git` repository. Documentation for older releases are available here: -* link:v1.5.2.4/git.html[documentation for release 1.5.2.4] +* link:v1.6.6.2/git.html[documentation for release 1.6.6.2] * release notes for + link:RelNotes-1.6.6.2.txt[1.6.6.2], + link:RelNotes-1.6.6.1.txt[1.6.6.1], + link:RelNotes-1.6.6.txt[1.6.6]. + +* link:v1.6.5.8/git.html[documentation for release 1.6.5.8] + +* release notes for + link:RelNotes-1.6.5.8.txt[1.6.5.8], + link:RelNotes-1.6.5.7.txt[1.6.5.7], + link:RelNotes-1.6.5.6.txt[1.6.5.6], + link:RelNotes-1.6.5.5.txt[1.6.5.5], + link:RelNotes-1.6.5.4.txt[1.6.5.4], + link:RelNotes-1.6.5.3.txt[1.6.5.3], + link:RelNotes-1.6.5.2.txt[1.6.5.2], + link:RelNotes-1.6.5.1.txt[1.6.5.1], + link:RelNotes-1.6.5.txt[1.6.5]. + +* link:v1.6.4.4/git.html[documentation for release 1.6.4.4] + +* release notes for + link:RelNotes-1.6.4.4.txt[1.6.4.4], + link:RelNotes-1.6.4.3.txt[1.6.4.3], + link:RelNotes-1.6.4.2.txt[1.6.4.2], + link:RelNotes-1.6.4.1.txt[1.6.4.1], + link:RelNotes-1.6.4.txt[1.6.4]. + +* link:v1.6.3.4/git.html[documentation for release 1.6.3.4] + +* release notes for + link:RelNotes-1.6.3.4.txt[1.6.3.4], + link:RelNotes-1.6.3.3.txt[1.6.3.3], + link:RelNotes-1.6.3.2.txt[1.6.3.2], + link:RelNotes-1.6.3.1.txt[1.6.3.1], + link:RelNotes-1.6.3.txt[1.6.3]. + +* release notes for + link:RelNotes-1.6.2.5.txt[1.6.2.5], + link:RelNotes-1.6.2.4.txt[1.6.2.4], + link:RelNotes-1.6.2.3.txt[1.6.2.3], + link:RelNotes-1.6.2.2.txt[1.6.2.2], + link:RelNotes-1.6.2.1.txt[1.6.2.1], + link:RelNotes-1.6.2.txt[1.6.2]. + +* link:v1.6.1.3/git.html[documentation for release 1.6.1.3] + +* release notes for + link:RelNotes-1.6.1.3.txt[1.6.1.3], + link:RelNotes-1.6.1.2.txt[1.6.1.2], + link:RelNotes-1.6.1.1.txt[1.6.1.1], + link:RelNotes-1.6.1.txt[1.6.1]. + +* link:v1.6.0.6/git.html[documentation for release 1.6.0.6] + +* release notes for + link:RelNotes-1.6.0.6.txt[1.6.0.6], + link:RelNotes-1.6.0.5.txt[1.6.0.5], + link:RelNotes-1.6.0.4.txt[1.6.0.4], + link:RelNotes-1.6.0.3.txt[1.6.0.3], + link:RelNotes-1.6.0.2.txt[1.6.0.2], + link:RelNotes-1.6.0.1.txt[1.6.0.1], + link:RelNotes-1.6.0.txt[1.6.0]. + +* link:v1.5.6.6/git.html[documentation for release 1.5.6.6] + +* release notes for + link:RelNotes-1.5.6.6.txt[1.5.6.6], + link:RelNotes-1.5.6.5.txt[1.5.6.5], + link:RelNotes-1.5.6.4.txt[1.5.6.4], + link:RelNotes-1.5.6.3.txt[1.5.6.3], + link:RelNotes-1.5.6.2.txt[1.5.6.2], + link:RelNotes-1.5.6.1.txt[1.5.6.1], + link:RelNotes-1.5.6.txt[1.5.6]. + +* link:v1.5.5.6/git.html[documentation for release 1.5.5.6] + +* release notes for + link:RelNotes-1.5.5.6.txt[1.5.5.6], + link:RelNotes-1.5.5.5.txt[1.5.5.5], + link:RelNotes-1.5.5.4.txt[1.5.5.4], + link:RelNotes-1.5.5.3.txt[1.5.5.3], + link:RelNotes-1.5.5.2.txt[1.5.5.2], + link:RelNotes-1.5.5.1.txt[1.5.5.1], + link:RelNotes-1.5.5.txt[1.5.5]. + +* link:v1.5.4.7/git.html[documentation for release 1.5.4.7] + +* release notes for + link:RelNotes-1.5.4.7.txt[1.5.4.7], + link:RelNotes-1.5.4.6.txt[1.5.4.6], + link:RelNotes-1.5.4.5.txt[1.5.4.5], + link:RelNotes-1.5.4.4.txt[1.5.4.4], + link:RelNotes-1.5.4.3.txt[1.5.4.3], + link:RelNotes-1.5.4.2.txt[1.5.4.2], + link:RelNotes-1.5.4.1.txt[1.5.4.1], + link:RelNotes-1.5.4.txt[1.5.4]. + +* link:v1.5.3.8/git.html[documentation for release 1.5.3.8] + +* release notes for + link:RelNotes-1.5.3.8.txt[1.5.3.8], + link:RelNotes-1.5.3.7.txt[1.5.3.7], + link:RelNotes-1.5.3.6.txt[1.5.3.6], + link:RelNotes-1.5.3.5.txt[1.5.3.5], + link:RelNotes-1.5.3.4.txt[1.5.3.4], + link:RelNotes-1.5.3.3.txt[1.5.3.3], + link:RelNotes-1.5.3.2.txt[1.5.3.2], + link:RelNotes-1.5.3.1.txt[1.5.3.1], + link:RelNotes-1.5.3.txt[1.5.3]. + +* link:v1.5.2.5/git.html[documentation for release 1.5.2.5] + +* release notes for + link:RelNotes-1.5.2.5.txt[1.5.2.5], link:RelNotes-1.5.2.4.txt[1.5.2.4], link:RelNotes-1.5.2.3.txt[1.5.2.3], link:RelNotes-1.5.2.2.txt[1.5.2.2], @@ -89,22 +203,36 @@ OPTIONS --help:: Prints the synopsis and a list of the most commonly used - commands. If a git command is named this option will bring up - the man-page for that command. If the option '--all' or '-a' is - given then all available commands are printed. + commands. If the option '--all' or '-a' is given then all + available commands are printed. If a git command is named this + option will bring up the manual page for that command. ++ +Other options are available to control how the manual page is +displayed. See linkgit:git-help[1] for more information, +because `git --help ...` is converted internally into `git +help ...`. --exec-path:: Path to wherever your core git programs are installed. This can also be controlled by setting the GIT_EXEC_PATH - environment variable. If no path is given 'git' will print + environment variable. If no path is given, 'git' will print the current setting and then exit. --p|--paginate:: +--html-path:: + Print the path to wherever your git HTML documentation is installed + and exit. + +-p:: +--paginate:: Pipe all output into 'less' (or if set, $PAGER). +--no-pager:: + Do not pipe git output into a pager. + --git-dir=<path>:: Set the path to the repository. This can also be controlled by - setting the GIT_DIR environment variable. + setting the GIT_DIR environment variable. It can be an absolute + path or relative path to current working directory. --work-tree=<path>:: Set the path to the working tree. The value will not be @@ -112,10 +240,22 @@ OPTIONS a .git directory (i.e. $GIT_DIR is not set). This can also be controlled by setting the GIT_WORK_TREE environment variable and the core.worktree configuration - variable. + variable. It can be an absolute path or relative path to + the directory specified by --git-dir or GIT_DIR. + Note: If --git-dir or GIT_DIR are specified but none of + --work-tree, GIT_WORK_TREE and core.worktree is specified, + the current working directory is regarded as the top directory + of your working tree. --bare:: - Same as --git-dir=`pwd`. + Treat the repository as a bare repository. If GIT_DIR + environment is not set, it is set to the current working + directory. + +--no-replace-objects:: + Do not use replacement refs to replace git objects. See + linkgit:git-replace[1] for more information. + FURTHER DOCUMENTATION --------------------- @@ -123,13 +263,18 @@ FURTHER DOCUMENTATION See the references above to get started using git. The following is probably more detail than necessary for a first-time user. -The <<Discussion,Discussion>> section below and the -link:core-tutorial.html[Core tutorial] both provide introductions to the -underlying git architecture. +The link:user-manual.html#git-concepts[git concepts chapter of the +user-manual] and linkgit:gitcore-tutorial[7] both provide +introductions to the underlying git architecture. + +See linkgit:gitworkflows[7] for an overview of recommended workflows. See also the link:howto-index.html[howto] documents for some useful examples. +The internals are documented in the +link:technical/api-index.html[GIT API documentation]. + GIT COMMANDS ------------ @@ -173,8 +318,8 @@ Low-level commands (plumbing) Although git includes its own porcelain layer, its low-level commands are sufficient to support development of alternative porcelains. Developers of such porcelains -might start by reading about gitlink:git-update-index[1] and -gitlink:git-read-tree[1]. +might start by reading about linkgit:git-update-index[1] and +linkgit:git-read-tree[1]. The interface (input, output, set of options and the semantics) to these low-level commands are meant to be a lot more stable @@ -210,7 +355,7 @@ Synching repositories include::cmds-synchingrepositories.txt[] -The following are helper programs used by the above; end users +The following are helper commands used by the above; end users typically do not use them directly. include::cmds-synchelpers.txt[] @@ -306,15 +451,15 @@ HEAD:: (i.e. the contents of `$GIT_DIR/refs/heads/<head>`). For a more complete list of ways to spell object names, see -"SPECIFYING REVISIONS" section in gitlink:git-rev-parse[1]. +"SPECIFYING REVISIONS" section in linkgit:git-rev-parse[1]. File/Directory Structure ------------------------ -Please see link:repository-layout.html[repository layout] document. +Please see the linkgit:gitrepository-layout[5] document. -Read link:hooks.html[hooks] for more details about each hook. +Read linkgit:githooks[5] for more details about each hook. Higher level SCMs may provide and manage additional information in the `$GIT_DIR`. @@ -322,7 +467,7 @@ Higher level SCMs may provide and manage additional information in the Terminology ----------- -Please see link:glossary.html[glossary] document. +Please see linkgit:gitglossary[7]. Environment Variables @@ -349,9 +494,9 @@ git so take care if using Cogito etc. 'GIT_ALTERNATE_OBJECT_DIRECTORIES':: Due to the immutable nature of git objects, old objects can be archived into shared, read-only directories. This variable - specifies a ":" separated list of git object directories which - can be used to search for git objects. New objects will not be - written to these directories. + specifies a ":" separated (on Windows ";" separated) list + of git object directories which can be used to search for git + objects. New objects will not be written to these directories. 'GIT_DIR':: If the 'GIT_DIR' environment variable is set then it @@ -365,6 +510,14 @@ git so take care if using Cogito etc. This can also be controlled by the '--work-tree' command line option and the core.worktree configuration variable. +'GIT_CEILING_DIRECTORIES':: + This should be a colon-separated list of absolute paths. + If set, it is a list of directories that git should not chdir + up into while looking for a repository directory. + It will not exclude the current working directory or + a GIT_DIR set on the command line or in the environment. + (Useful for excluding slow-loading network directories.) + git Commits ~~~~~~~~~~~ 'GIT_AUTHOR_NAME':: @@ -374,7 +527,7 @@ git Commits 'GIT_COMMITTER_EMAIL':: 'GIT_COMMITTER_DATE':: 'EMAIL':: - see gitlink:git-commit-tree[1] + see linkgit:git-commit-tree[1] git Diffs ~~~~~~~~~ @@ -414,17 +567,34 @@ other 'GIT_MERGE_VERBOSITY':: A number controlling the amount of output shown by the recursive merge strategy. Overrides merge.verbosity. - See gitlink:git-merge[1] + See linkgit:git-merge[1] 'GIT_PAGER':: This environment variable overrides `$PAGER`. If it is set to an empty string or to the value "cat", git will not launch - a pager. + a pager. See also the `core.pager` option in + linkgit:git-config[1]. + +'GIT_SSH':: + If this environment variable is set then 'git-fetch' + and 'git-push' will use this command instead + of 'ssh' when they need to connect to a remote system. + The '$GIT_SSH' command will be given exactly two arguments: + the 'username@host' (or just 'host') from the URL and the + shell command to execute on that remote system. ++ +To pass options to the program that you want to list in GIT_SSH +you will need to wrap the program and options into a shell script, +then set GIT_SSH to refer to the shell script. ++ +Usually it is easier to configure any desired options through your +personal `.ssh/config` file. Please consult your ssh documentation +for further details. 'GIT_FLUSH':: If this environment variable is set to "1", then commands such - as git-blame (in incremental mode), git-rev-list, git-log, - git-whatchanged, etc., will force a flush of the output stream + as 'git-blame' (in incremental mode), 'git-rev-list', 'git-log', + and 'git-whatchanged' will force a flush of the output stream after each commit-oriented record have been flushed. If this variable is set to "0", the output of these commands will be done using completely buffered I/O. If this environment variable is @@ -447,13 +617,62 @@ other Discussion[[Discussion]] ------------------------ -include::core-intro.txt[] + +More detail on the following is available from the +link:user-manual.html#git-concepts[git concepts chapter of the +user-manual] and linkgit:gitcore-tutorial[7]. + +A git project normally consists of a working directory with a ".git" +subdirectory at the top level. The .git directory contains, among other +things, a compressed object database representing the complete history +of the project, an "index" file which links that history to the current +contents of the working tree, and named pointers into that history such +as tags and branch heads. + +The object database contains objects of three main types: blobs, which +hold file data; trees, which point to blobs and other trees to build up +directory hierarchies; and commits, which each reference a single tree +and some number of parent commits. + +The commit, equivalent to what other systems call a "changeset" or +"version", represents a step in the project's history, and each parent +represents an immediately preceding step. Commits with more than one +parent represent merges of independent lines of development. + +All objects are named by the SHA1 hash of their contents, normally +written as a string of 40 hex digits. Such names are globally unique. +The entire history leading up to a commit can be vouched for by signing +just that commit. A fourth object type, the tag, is provided for this +purpose. + +When first created, objects are stored in individual files, but for +efficiency may later be compressed together into "pack files". + +Named pointers called refs mark interesting points in history. A ref +may contain the SHA1 name of an object or the name of another ref. Refs +with names beginning `ref/head/` contain the SHA1 name of the most +recent commit (or "head") of a branch under development. SHA1 names of +tags of interest are stored under `ref/tags/`. A special ref named +`HEAD` contains the name of the currently checked-out branch. + +The index file is initialized with a list of all paths and, for each +path, a blob object and a set of attributes. The blob object represents +the contents of the file as of the head of the current branch. The +attributes (last modified time, size, etc.) are taken from the +corresponding file in the working tree. Subsequent changes to the +working tree can be found by comparing these attributes. The index may +be updated with new content, and new commits may be created from the +content stored in the index. + +The index is also capable of storing multiple entries (called "stages") +for a given pathname. These stages are used to hold the various +unmerged version of a file when a merge is in progress. Authors ------- * git's founding father is Linus Torvalds <torvalds@osdl.org>. -* The current git nurse is Junio C Hamano <junkio@cox.net>. -* The git potty was written by Andres Ericsson <ae@op5.se>. +* The current git nurse is Junio C Hamano <gitster@pobox.com>. +* The git potty was written by Andreas Ericsson <ae@op5.se>. * General upbringing is handled by the git-list <git@vger.kernel.org>. Documentation @@ -462,6 +681,14 @@ The documentation for git suite was started by David Greaves <david@dgreaves.com>, and later enhanced greatly by the contributors on the git-list <git@vger.kernel.org>. +SEE ALSO +-------- +linkgit:gittutorial[7], linkgit:gittutorial-2[7], +link:everyday.html[Everyday Git], linkgit:gitcvs-migration[7], +linkgit:gitglossary[7], linkgit:gitcore-tutorial[7], +linkgit:gitcli[7], link:user-manual.html[The Git User's Manual], +linkgit:gitworkflows[7] + GIT --- -Part of the gitlink:git[7] suite +Part of the linkgit:git[1] suite |