diff options
Diffstat (limited to 'Documentation/git.txt')
| -rw-r--r-- | Documentation/git.txt | 1037 |
1 files changed, 1037 insertions, 0 deletions
diff --git a/Documentation/git.txt b/Documentation/git.txt new file mode 100644 index 0000000000..4448ce2704 --- /dev/null +++ b/Documentation/git.txt @@ -0,0 +1,1037 @@ +git(1) +====== + +NAME +---- +git - the stupid content tracker + + +SYNOPSIS +-------- +[verse] +'git' [--version] [--help] [-C <path>] [-c <name>=<value>] + [--exec-path[=<path>]] [--html-path] [--man-path] [--info-path] + [-p|--paginate|--no-pager] [--no-replace-objects] [--bare] + [--git-dir=<path>] [--work-tree=<path>] [--namespace=<name>] + <command> [<args>] + +DESCRIPTION +----------- +Git is a fast, scalable, distributed revision control system with an +unusually rich command set that provides both high-level operations +and full access to internals. + +See linkgit:gittutorial[7] to get started, then see +link:everyday.html[Everyday Git] for a useful minimum set of +commands. The link:user-manual.html[Git User's Manual] has a more +in-depth introduction. + +After you mastered the basic concepts, you can come back to this +page to learn what commands Git offers. You can learn more about +individual Git commands with "git help command". linkgit:gitcli[7] +manual page gives you an overview of the command line command syntax. + +Formatted and hyperlinked version of the latest Git documentation +can be viewed at `http://git-htmldocs.googlecode.com/git/git.html`. + +ifdef::stalenotes[] +[NOTE] +============ + +You are reading the documentation for the latest (possibly +unreleased) version of Git, that is available from 'master' +branch of the `git.git` repository. +Documentation for older releases are available here: + +* link:v1.8.5.1/git.html[documentation for release 1.8.5.1] + +* release notes for + link:RelNotes/1.8.5.1.txt[1.8.5.1], + link:RelNotes/1.8.5.txt[1.8.5]. + +* link:v1.8.4.5/git.html[documentation for release 1.8.4.5] + +* release notes for + link:RelNotes/1.8.4.5.txt[1.8.4.5], + link:RelNotes/1.8.4.4.txt[1.8.4.4], + link:RelNotes/1.8.4.3.txt[1.8.4.3], + link:RelNotes/1.8.4.2.txt[1.8.4.2], + link:RelNotes/1.8.4.1.txt[1.8.4.1], + link:RelNotes/1.8.4.txt[1.8.4]. + +* link:v1.8.3.4/git.html[documentation for release 1.8.3.4] + +* release notes for + link:RelNotes/1.8.3.4.txt[1.8.3.4], + link:RelNotes/1.8.3.3.txt[1.8.3.3], + link:RelNotes/1.8.3.2.txt[1.8.3.2], + link:RelNotes/1.8.3.1.txt[1.8.3.1], + link:RelNotes/1.8.3.txt[1.8.3]. + +* link:v1.8.2.3/git.html[documentation for release 1.8.2.3] + +* release notes for + link:RelNotes/1.8.2.3.txt[1.8.2.3], + link:RelNotes/1.8.2.2.txt[1.8.2.2], + link:RelNotes/1.8.2.1.txt[1.8.2.1], + link:RelNotes/1.8.2.txt[1.8.2]. + +* link:v1.8.1.6/git.html[documentation for release 1.8.1.6] + +* release notes for + link:RelNotes/1.8.1.6.txt[1.8.1.6], + link:RelNotes/1.8.1.5.txt[1.8.1.5], + link:RelNotes/1.8.1.4.txt[1.8.1.4], + link:RelNotes/1.8.1.3.txt[1.8.1.3], + link:RelNotes/1.8.1.2.txt[1.8.1.2], + link:RelNotes/1.8.1.1.txt[1.8.1.1], + link:RelNotes/1.8.1.txt[1.8.1]. + +* link:v1.8.0.3/git.html[documentation for release 1.8.0.3] + +* release notes for + link:RelNotes/1.8.0.3.txt[1.8.0.3], + link:RelNotes/1.8.0.2.txt[1.8.0.2], + link:RelNotes/1.8.0.1.txt[1.8.0.1], + link:RelNotes/1.8.0.txt[1.8.0]. + +* link:v1.7.12.4/git.html[documentation for release 1.7.12.4] + +* release notes for + link:RelNotes/1.7.12.4.txt[1.7.12.4], + link:RelNotes/1.7.12.3.txt[1.7.12.3], + link:RelNotes/1.7.12.2.txt[1.7.12.2], + link:RelNotes/1.7.12.1.txt[1.7.12.1], + link:RelNotes/1.7.12.txt[1.7.12]. + +* link:v1.7.11.7/git.html[documentation for release 1.7.11.7] + +* release notes for + link:RelNotes/1.7.11.7.txt[1.7.11.7], + link:RelNotes/1.7.11.6.txt[1.7.11.6], + link:RelNotes/1.7.11.5.txt[1.7.11.5], + link:RelNotes/1.7.11.4.txt[1.7.11.4], + link:RelNotes/1.7.11.3.txt[1.7.11.3], + link:RelNotes/1.7.11.2.txt[1.7.11.2], + link:RelNotes/1.7.11.1.txt[1.7.11.1], + link:RelNotes/1.7.11.txt[1.7.11]. + +* link:v1.7.10.5/git.html[documentation for release 1.7.10.5] + +* release notes for + link:RelNotes/1.7.10.5.txt[1.7.10.5], + link:RelNotes/1.7.10.4.txt[1.7.10.4], + link:RelNotes/1.7.10.3.txt[1.7.10.3], + link:RelNotes/1.7.10.2.txt[1.7.10.2], + link:RelNotes/1.7.10.1.txt[1.7.10.1], + link:RelNotes/1.7.10.txt[1.7.10]. + +* link:v1.7.9.7/git.html[documentation for release 1.7.9.7] + +* release notes for + link:RelNotes/1.7.9.7.txt[1.7.9.7], + link:RelNotes/1.7.9.6.txt[1.7.9.6], + link:RelNotes/1.7.9.5.txt[1.7.9.5], + link:RelNotes/1.7.9.4.txt[1.7.9.4], + link:RelNotes/1.7.9.3.txt[1.7.9.3], + link:RelNotes/1.7.9.2.txt[1.7.9.2], + link:RelNotes/1.7.9.1.txt[1.7.9.1], + link:RelNotes/1.7.9.txt[1.7.9]. + +* link:v1.7.8.6/git.html[documentation for release 1.7.8.6] + +* release notes for + link:RelNotes/1.7.8.6.txt[1.7.8.6], + link:RelNotes/1.7.8.5.txt[1.7.8.5], + link:RelNotes/1.7.8.4.txt[1.7.8.4], + link:RelNotes/1.7.8.3.txt[1.7.8.3], + link:RelNotes/1.7.8.2.txt[1.7.8.2], + link:RelNotes/1.7.8.1.txt[1.7.8.1], + link:RelNotes/1.7.8.txt[1.7.8]. + +* link:v1.7.7.7/git.html[documentation for release 1.7.7.7] + +* release notes for + link:RelNotes/1.7.7.7.txt[1.7.7.7], + link:RelNotes/1.7.7.6.txt[1.7.7.6], + link:RelNotes/1.7.7.5.txt[1.7.7.5], + link:RelNotes/1.7.7.4.txt[1.7.7.4], + link:RelNotes/1.7.7.3.txt[1.7.7.3], + link:RelNotes/1.7.7.2.txt[1.7.7.2], + link:RelNotes/1.7.7.1.txt[1.7.7.1], + link:RelNotes/1.7.7.txt[1.7.7]. + +* link:v1.7.6.6/git.html[documentation for release 1.7.6.6] + +* release notes for + link:RelNotes/1.7.6.6.txt[1.7.6.6], + link:RelNotes/1.7.6.5.txt[1.7.6.5], + link:RelNotes/1.7.6.4.txt[1.7.6.4], + link:RelNotes/1.7.6.3.txt[1.7.6.3], + link:RelNotes/1.7.6.2.txt[1.7.6.2], + link:RelNotes/1.7.6.1.txt[1.7.6.1], + link:RelNotes/1.7.6.txt[1.7.6]. + +* link:v1.7.5.4/git.html[documentation for release 1.7.5.4] + +* release notes for + link:RelNotes/1.7.5.4.txt[1.7.5.4], + link:RelNotes/1.7.5.3.txt[1.7.5.3], + link:RelNotes/1.7.5.2.txt[1.7.5.2], + link:RelNotes/1.7.5.1.txt[1.7.5.1], + link:RelNotes/1.7.5.txt[1.7.5]. + +* link:v1.7.4.5/git.html[documentation for release 1.7.4.5] + +* release notes for + link:RelNotes/1.7.4.5.txt[1.7.4.5], + link:RelNotes/1.7.4.4.txt[1.7.4.4], + link:RelNotes/1.7.4.3.txt[1.7.4.3], + link:RelNotes/1.7.4.2.txt[1.7.4.2], + link:RelNotes/1.7.4.1.txt[1.7.4.1], + link:RelNotes/1.7.4.txt[1.7.4]. + +* link:v1.7.3.5/git.html[documentation for release 1.7.3.5] + +* release notes for + link:RelNotes/1.7.3.5.txt[1.7.3.5], + link:RelNotes/1.7.3.4.txt[1.7.3.4], + link:RelNotes/1.7.3.3.txt[1.7.3.3], + link:RelNotes/1.7.3.2.txt[1.7.3.2], + link:RelNotes/1.7.3.1.txt[1.7.3.1], + link:RelNotes/1.7.3.txt[1.7.3]. + +* link:v1.7.2.5/git.html[documentation for release 1.7.2.5] + +* release notes for + link:RelNotes/1.7.2.5.txt[1.7.2.5], + link:RelNotes/1.7.2.4.txt[1.7.2.4], + link:RelNotes/1.7.2.3.txt[1.7.2.3], + link:RelNotes/1.7.2.2.txt[1.7.2.2], + link:RelNotes/1.7.2.1.txt[1.7.2.1], + link:RelNotes/1.7.2.txt[1.7.2]. + +* link:v1.7.1.4/git.html[documentation for release 1.7.1.4] + +* release notes for + link:RelNotes/1.7.1.4.txt[1.7.1.4], + link:RelNotes/1.7.1.3.txt[1.7.1.3], + link:RelNotes/1.7.1.2.txt[1.7.1.2], + link:RelNotes/1.7.1.1.txt[1.7.1.1], + link:RelNotes/1.7.1.txt[1.7.1]. + +* link:v1.7.0.9/git.html[documentation for release 1.7.0.9] + +* release notes for + link:RelNotes/1.7.0.9.txt[1.7.0.9], + link:RelNotes/1.7.0.8.txt[1.7.0.8], + link:RelNotes/1.7.0.7.txt[1.7.0.7], + link:RelNotes/1.7.0.6.txt[1.7.0.6], + link:RelNotes/1.7.0.5.txt[1.7.0.5], + link:RelNotes/1.7.0.4.txt[1.7.0.4], + link:RelNotes/1.7.0.3.txt[1.7.0.3], + link:RelNotes/1.7.0.2.txt[1.7.0.2], + link:RelNotes/1.7.0.1.txt[1.7.0.1], + link:RelNotes/1.7.0.txt[1.7.0]. + +* link:v1.6.6.3/git.html[documentation for release 1.6.6.3] + +* release notes for + link:RelNotes/1.6.6.3.txt[1.6.6.3], + link:RelNotes/1.6.6.2.txt[1.6.6.2], + link:RelNotes/1.6.6.1.txt[1.6.6.1], + link:RelNotes/1.6.6.txt[1.6.6]. + +* link:v1.6.5.9/git.html[documentation for release 1.6.5.9] + +* release notes for + link:RelNotes/1.6.5.9.txt[1.6.5.9], + link:RelNotes/1.6.5.8.txt[1.6.5.8], + link:RelNotes/1.6.5.7.txt[1.6.5.7], + link:RelNotes/1.6.5.6.txt[1.6.5.6], + link:RelNotes/1.6.5.5.txt[1.6.5.5], + link:RelNotes/1.6.5.4.txt[1.6.5.4], + link:RelNotes/1.6.5.3.txt[1.6.5.3], + link:RelNotes/1.6.5.2.txt[1.6.5.2], + link:RelNotes/1.6.5.1.txt[1.6.5.1], + link:RelNotes/1.6.5.txt[1.6.5]. + +* link:v1.6.4.5/git.html[documentation for release 1.6.4.5] + +* release notes for + link:RelNotes/1.6.4.5.txt[1.6.4.5], + link:RelNotes/1.6.4.4.txt[1.6.4.4], + link:RelNotes/1.6.4.3.txt[1.6.4.3], + link:RelNotes/1.6.4.2.txt[1.6.4.2], + link:RelNotes/1.6.4.1.txt[1.6.4.1], + link:RelNotes/1.6.4.txt[1.6.4]. + +* link:v1.6.3.4/git.html[documentation for release 1.6.3.4] + +* release notes for + link:RelNotes/1.6.3.4.txt[1.6.3.4], + link:RelNotes/1.6.3.3.txt[1.6.3.3], + link:RelNotes/1.6.3.2.txt[1.6.3.2], + link:RelNotes/1.6.3.1.txt[1.6.3.1], + link:RelNotes/1.6.3.txt[1.6.3]. + +* release notes for + link:RelNotes/1.6.2.5.txt[1.6.2.5], + link:RelNotes/1.6.2.4.txt[1.6.2.4], + link:RelNotes/1.6.2.3.txt[1.6.2.3], + link:RelNotes/1.6.2.2.txt[1.6.2.2], + link:RelNotes/1.6.2.1.txt[1.6.2.1], + link:RelNotes/1.6.2.txt[1.6.2]. + +* link:v1.6.1.3/git.html[documentation for release 1.6.1.3] + +* release notes for + link:RelNotes/1.6.1.3.txt[1.6.1.3], + link:RelNotes/1.6.1.2.txt[1.6.1.2], + link:RelNotes/1.6.1.1.txt[1.6.1.1], + link:RelNotes/1.6.1.txt[1.6.1]. + +* link:v1.6.0.6/git.html[documentation for release 1.6.0.6] + +* release notes for + link:RelNotes/1.6.0.6.txt[1.6.0.6], + link:RelNotes/1.6.0.5.txt[1.6.0.5], + link:RelNotes/1.6.0.4.txt[1.6.0.4], + link:RelNotes/1.6.0.3.txt[1.6.0.3], + link:RelNotes/1.6.0.2.txt[1.6.0.2], + link:RelNotes/1.6.0.1.txt[1.6.0.1], + link:RelNotes/1.6.0.txt[1.6.0]. + +* link:v1.5.6.6/git.html[documentation for release 1.5.6.6] + +* release notes for + link:RelNotes/1.5.6.6.txt[1.5.6.6], + link:RelNotes/1.5.6.5.txt[1.5.6.5], + link:RelNotes/1.5.6.4.txt[1.5.6.4], + link:RelNotes/1.5.6.3.txt[1.5.6.3], + link:RelNotes/1.5.6.2.txt[1.5.6.2], + link:RelNotes/1.5.6.1.txt[1.5.6.1], + link:RelNotes/1.5.6.txt[1.5.6]. + +* link:v1.5.5.6/git.html[documentation for release 1.5.5.6] + +* release notes for + link:RelNotes/1.5.5.6.txt[1.5.5.6], + link:RelNotes/1.5.5.5.txt[1.5.5.5], + link:RelNotes/1.5.5.4.txt[1.5.5.4], + link:RelNotes/1.5.5.3.txt[1.5.5.3], + link:RelNotes/1.5.5.2.txt[1.5.5.2], + link:RelNotes/1.5.5.1.txt[1.5.5.1], + link:RelNotes/1.5.5.txt[1.5.5]. + +* link:v1.5.4.7/git.html[documentation for release 1.5.4.7] + +* release notes for + link:RelNotes/1.5.4.7.txt[1.5.4.7], + link:RelNotes/1.5.4.6.txt[1.5.4.6], + link:RelNotes/1.5.4.5.txt[1.5.4.5], + link:RelNotes/1.5.4.4.txt[1.5.4.4], + link:RelNotes/1.5.4.3.txt[1.5.4.3], + link:RelNotes/1.5.4.2.txt[1.5.4.2], + link:RelNotes/1.5.4.1.txt[1.5.4.1], + link:RelNotes/1.5.4.txt[1.5.4]. + +* link:v1.5.3.8/git.html[documentation for release 1.5.3.8] + +* release notes for + link:RelNotes/1.5.3.8.txt[1.5.3.8], + link:RelNotes/1.5.3.7.txt[1.5.3.7], + link:RelNotes/1.5.3.6.txt[1.5.3.6], + link:RelNotes/1.5.3.5.txt[1.5.3.5], + link:RelNotes/1.5.3.4.txt[1.5.3.4], + link:RelNotes/1.5.3.3.txt[1.5.3.3], + link:RelNotes/1.5.3.2.txt[1.5.3.2], + link:RelNotes/1.5.3.1.txt[1.5.3.1], + link:RelNotes/1.5.3.txt[1.5.3]. + +* link:v1.5.2.5/git.html[documentation for release 1.5.2.5] + +* release notes for + link:RelNotes/1.5.2.5.txt[1.5.2.5], + link:RelNotes/1.5.2.4.txt[1.5.2.4], + link:RelNotes/1.5.2.3.txt[1.5.2.3], + link:RelNotes/1.5.2.2.txt[1.5.2.2], + link:RelNotes/1.5.2.1.txt[1.5.2.1], + link:RelNotes/1.5.2.txt[1.5.2]. + +* link:v1.5.1.6/git.html[documentation for release 1.5.1.6] + +* release notes for + link:RelNotes/1.5.1.6.txt[1.5.1.6], + link:RelNotes/1.5.1.5.txt[1.5.1.5], + link:RelNotes/1.5.1.4.txt[1.5.1.4], + link:RelNotes/1.5.1.3.txt[1.5.1.3], + link:RelNotes/1.5.1.2.txt[1.5.1.2], + link:RelNotes/1.5.1.1.txt[1.5.1.1], + link:RelNotes/1.5.1.txt[1.5.1]. + +* link:v1.5.0.7/git.html[documentation for release 1.5.0.7] + +* release notes for + link:RelNotes/1.5.0.7.txt[1.5.0.7], + link:RelNotes/1.5.0.6.txt[1.5.0.6], + link:RelNotes/1.5.0.5.txt[1.5.0.5], + link:RelNotes/1.5.0.3.txt[1.5.0.3], + link:RelNotes/1.5.0.2.txt[1.5.0.2], + link:RelNotes/1.5.0.1.txt[1.5.0.1], + link:RelNotes/1.5.0.txt[1.5.0]. + +* documentation for release link:v1.4.4.4/git.html[1.4.4.4], + link:v1.3.3/git.html[1.3.3], + link:v1.2.6/git.html[1.2.6], + link:v1.0.13/git.html[1.0.13]. + +============ + +endif::stalenotes[] + +OPTIONS +------- +--version:: + Prints the Git suite version that the 'git' program came from. + +--help:: + Prints the synopsis and a list of the most commonly used + commands. If the option '--all' or '-a' is given then all + available commands are printed. If a Git command is named this + option will bring up the manual page for that command. ++ +Other options are available to control how the manual page is +displayed. See linkgit:git-help[1] for more information, +because `git --help ...` is converted internally into `git +help ...`. + +-C <path>:: + Run as if git was started in '<path>' instead of the current working + directory. When multiple `-C` options are given, each subsequent + non-absolute `-C <path>` is interpreted relative to the preceding `-C + <path>`. ++ +This option affects options that expect path name like `--git-dir` and +`--work-tree` in that their interpretations of the path names would be +made relative to the working directory caused by the `-C` option. For +example the following invocations are equivalent: + + git --git-dir=a.git --work-tree=b -C c status + git --git-dir=c/a.git --work-tree=c/b status + +-c <name>=<value>:: + Pass a configuration parameter to the command. The value + given will override values from configuration files. + The <name> is expected in the same format as listed by + 'git config' (subkeys separated by dots). + +--exec-path[=<path>]:: + Path to wherever your core Git programs are installed. + This can also be controlled by setting the GIT_EXEC_PATH + environment variable. If no path is given, 'git' will print + the current setting and then exit. + +--html-path:: + Print the path, without trailing slash, where Git's HTML + documentation is installed and exit. + +--man-path:: + Print the manpath (see `man(1)`) for the man pages for + this version of Git and exit. + +--info-path:: + Print the path where the Info files documenting this + version of Git are installed and exit. + +-p:: +--paginate:: + Pipe all output into 'less' (or if set, $PAGER) if standard + output is a terminal. This overrides the `pager.<cmd>` + configuration options (see the "Configuration Mechanism" section + below). + +--no-pager:: + Do not pipe Git output into a pager. + +--git-dir=<path>:: + Set the path to the repository. This can also be controlled by + setting the GIT_DIR environment variable. It can be an absolute + path or relative path to current working directory. + +--work-tree=<path>:: + Set the path to the working tree. It can be an absolute path + or a path relative to the current working directory. + This can also be controlled by setting the GIT_WORK_TREE + environment variable and the core.worktree configuration + variable (see core.worktree in linkgit:git-config[1] for a + more detailed discussion). + +--namespace=<path>:: + Set the Git namespace. See linkgit:gitnamespaces[7] for more + details. Equivalent to setting the `GIT_NAMESPACE` environment + variable. + +--bare:: + Treat the repository as a bare repository. If GIT_DIR + environment is not set, it is set to the current working + directory. + +--no-replace-objects:: + Do not use replacement refs to replace Git objects. See + linkgit:git-replace[1] for more information. + +--literal-pathspecs:: + Treat pathspecs literally (i.e. no globbing, no pathspec magic). + This is equivalent to setting the `GIT_LITERAL_PATHSPECS` environment + variable to `1`. + +--glob-pathspecs:: + Add "glob" magic to all pathspec. This is equivalent to setting + the `GIT_GLOB_PATHSPECS` environment variable to `1`. Disabling + globbing on individual pathspecs can be done using pathspec + magic ":(literal)" + +--noglob-pathspecs:: + Add "literal" magic to all pathspec. This is equivalent to setting + the `GIT_NOGLOB_PATHSPECS` environment variable to `1`. Enabling + globbing on individual pathspecs can be done using pathspec + magic ":(glob)" + +--icase-pathspecs:: + Add "icase" magic to all pathspec. This is equivalent to setting + the `GIT_ICASE_PATHSPECS` environment variable to `1`. + +GIT COMMANDS +------------ + +We divide Git into high level ("porcelain") commands and low level +("plumbing") commands. + +High-level commands (porcelain) +------------------------------- + +We separate the porcelain commands into the main commands and some +ancillary user utilities. + +Main porcelain commands +~~~~~~~~~~~~~~~~~~~~~~~ + +include::cmds-mainporcelain.txt[] + +Ancillary Commands +~~~~~~~~~~~~~~~~~~ +Manipulators: + +include::cmds-ancillarymanipulators.txt[] + +Interrogators: + +include::cmds-ancillaryinterrogators.txt[] + + +Interacting with Others +~~~~~~~~~~~~~~~~~~~~~~~ + +These commands are to interact with foreign SCM and with other +people via patch over e-mail. + +include::cmds-foreignscminterface.txt[] + + +Low-level commands (plumbing) +----------------------------- + +Although Git includes its +own porcelain layer, its low-level commands are sufficient to support +development of alternative porcelains. Developers of such porcelains +might start by reading about linkgit:git-update-index[1] and +linkgit:git-read-tree[1]. + +The interface (input, output, set of options and the semantics) +to these low-level commands are meant to be a lot more stable +than Porcelain level commands, because these commands are +primarily for scripted use. The interface to Porcelain commands +on the other hand are subject to change in order to improve the +end user experience. + +The following description divides +the low-level commands into commands that manipulate objects (in +the repository, index, and working tree), commands that interrogate and +compare objects, and commands that move objects and references between +repositories. + + +Manipulation commands +~~~~~~~~~~~~~~~~~~~~~ + +include::cmds-plumbingmanipulators.txt[] + + +Interrogation commands +~~~~~~~~~~~~~~~~~~~~~~ + +include::cmds-plumbinginterrogators.txt[] + +In general, the interrogate commands do not touch the files in +the working tree. + + +Synching repositories +~~~~~~~~~~~~~~~~~~~~~ + +include::cmds-synchingrepositories.txt[] + +The following are helper commands used by the above; end users +typically do not use them directly. + +include::cmds-synchelpers.txt[] + + +Internal helper commands +~~~~~~~~~~~~~~~~~~~~~~~~ + +These are internal helper commands used by other commands; end +users typically do not use them directly. + +include::cmds-purehelpers.txt[] + + +Configuration Mechanism +----------------------- + +Git uses a simple text format to store customizations that are per +repository and are per user. Such a configuration file may look +like this: + +------------ +# +# A '#' or ';' character indicates a comment. +# + +; core variables +[core] + ; Don't trust file modes + filemode = false + +; user identity +[user] + name = "Junio C Hamano" + email = "gitster@pobox.com" + +------------ + +Various commands read from the configuration file and adjust +their operation accordingly. See linkgit:git-config[1] for a +list and more details about the configuration mechanism. + + +Identifier Terminology +---------------------- +<object>:: + Indicates the object name for any type of object. + +<blob>:: + Indicates a blob object name. + +<tree>:: + Indicates a tree object name. + +<commit>:: + Indicates a commit object name. + +<tree-ish>:: + Indicates a tree, commit or tag object name. A + command that takes a <tree-ish> argument ultimately wants to + operate on a <tree> object but automatically dereferences + <commit> and <tag> objects that point at a <tree>. + +<commit-ish>:: + Indicates a commit or tag object name. A + command that takes a <commit-ish> argument ultimately wants to + operate on a <commit> object but automatically dereferences + <tag> objects that point at a <commit>. + +<type>:: + Indicates that an object type is required. + Currently one of: `blob`, `tree`, `commit`, or `tag`. + +<file>:: + Indicates a filename - almost always relative to the + root of the tree structure `GIT_INDEX_FILE` describes. + +Symbolic Identifiers +-------------------- +Any Git command accepting any <object> can also use the following +symbolic notation: + +HEAD:: + indicates the head of the current branch. + +<tag>:: + a valid tag 'name' + (i.e. a `refs/tags/<tag>` reference). + +<head>:: + a valid head 'name' + (i.e. a `refs/heads/<head>` reference). + +For a more complete list of ways to spell object names, see +"SPECIFYING REVISIONS" section in linkgit:gitrevisions[7]. + + +File/Directory Structure +------------------------ + +Please see the linkgit:gitrepository-layout[5] document. + +Read linkgit:githooks[5] for more details about each hook. + +Higher level SCMs may provide and manage additional information in the +`$GIT_DIR`. + + +Terminology +----------- +Please see linkgit:gitglossary[7]. + + +Environment Variables +--------------------- +Various Git commands use the following environment variables: + +The Git Repository +~~~~~~~~~~~~~~~~~~ +These environment variables apply to 'all' core Git commands. Nb: it +is worth noting that they may be used/overridden by SCMS sitting above +Git so take care if using Cogito etc. + +'GIT_INDEX_FILE':: + This environment allows the specification of an alternate + index file. If not specified, the default of `$GIT_DIR/index` + is used. + +'GIT_OBJECT_DIRECTORY':: + If the object storage directory is specified via this + environment variable then the sha1 directories are created + underneath - otherwise the default `$GIT_DIR/objects` + directory is used. + +'GIT_ALTERNATE_OBJECT_DIRECTORIES':: + Due to the immutable nature of Git objects, old objects can be + archived into shared, read-only directories. This variable + specifies a ":" separated (on Windows ";" separated) list + of Git object directories which can be used to search for Git + objects. New objects will not be written to these directories. + +'GIT_DIR':: + If the 'GIT_DIR' environment variable is set then it + specifies a path to use instead of the default `.git` + for the base of the repository. + The '--git-dir' command-line option also sets this value. + +'GIT_WORK_TREE':: + Set the path to the root of the working tree. + This can also be controlled by the '--work-tree' command line + option and the core.worktree configuration variable. + +'GIT_NAMESPACE':: + Set the Git namespace; see linkgit:gitnamespaces[7] for details. + The '--namespace' command-line option also sets this value. + +'GIT_CEILING_DIRECTORIES':: + This should be a colon-separated list of absolute paths. If + set, it is a list of directories that Git should not chdir up + into while looking for a repository directory (useful for + excluding slow-loading network directories). It will not + exclude the current working directory or a GIT_DIR set on the + command line or in the environment. Normally, Git has to read + the entries in this list and resolve any symlink that + might be present in order to compare them with the current + directory. However, if even this access is slow, you + can add an empty entry to the list to tell Git that the + subsequent entries are not symlinks and needn't be resolved; + e.g., + 'GIT_CEILING_DIRECTORIES=/maybe/symlink::/very/slow/non/symlink'. + +'GIT_DISCOVERY_ACROSS_FILESYSTEM':: + When run in a directory that does not have ".git" repository + directory, Git tries to find such a directory in the parent + directories to find the top of the working tree, but by default it + does not cross filesystem boundaries. This environment variable + can be set to true to tell Git not to stop at filesystem + boundaries. Like 'GIT_CEILING_DIRECTORIES', this will not affect + an explicit repository directory set via 'GIT_DIR' or on the + command line. + +Git Commits +~~~~~~~~~~~ +'GIT_AUTHOR_NAME':: +'GIT_AUTHOR_EMAIL':: +'GIT_AUTHOR_DATE':: +'GIT_COMMITTER_NAME':: +'GIT_COMMITTER_EMAIL':: +'GIT_COMMITTER_DATE':: +'EMAIL':: + see linkgit:git-commit-tree[1] + +Git Diffs +~~~~~~~~~ +'GIT_DIFF_OPTS':: + Only valid setting is "--unified=??" or "-u??" to set the + number of context lines shown when a unified diff is created. + This takes precedence over any "-U" or "--unified" option + value passed on the Git diff command line. + +'GIT_EXTERNAL_DIFF':: + When the environment variable 'GIT_EXTERNAL_DIFF' is set, the + program named by it is called, instead of the diff invocation + described above. For a path that is added, removed, or modified, + 'GIT_EXTERNAL_DIFF' is called with 7 parameters: + + path old-file old-hex old-mode new-file new-hex new-mode ++ +where: + + <old|new>-file:: are files GIT_EXTERNAL_DIFF can use to read the + contents of <old|new>, + <old|new>-hex:: are the 40-hexdigit SHA-1 hashes, + <old|new>-mode:: are the octal representation of the file modes. ++ +The file parameters can point at the user's working file +(e.g. `new-file` in "git-diff-files"), `/dev/null` (e.g. `old-file` +when a new file is added), or a temporary file (e.g. `old-file` in the +index). 'GIT_EXTERNAL_DIFF' should not worry about unlinking the +temporary file --- it is removed when 'GIT_EXTERNAL_DIFF' exits. ++ +For a path that is unmerged, 'GIT_EXTERNAL_DIFF' is called with 1 +parameter, <path>. + +other +~~~~~ +'GIT_MERGE_VERBOSITY':: + A number controlling the amount of output shown by + the recursive merge strategy. Overrides merge.verbosity. + See linkgit:git-merge[1] + +'GIT_PAGER':: + This environment variable overrides `$PAGER`. If it is set + to an empty string or to the value "cat", Git will not launch + a pager. See also the `core.pager` option in + linkgit:git-config[1]. + +'GIT_EDITOR':: + This environment variable overrides `$EDITOR` and `$VISUAL`. + It is used by several Git commands when, on interactive mode, + an editor is to be launched. See also linkgit:git-var[1] + and the `core.editor` option in linkgit:git-config[1]. + +'GIT_SSH':: + If this environment variable is set then 'git fetch' + and 'git push' will use this command instead + of 'ssh' when they need to connect to a remote system. + The '$GIT_SSH' command will be given exactly two or + four arguments: the 'username@host' (or just 'host') + from the URL and the shell command to execute on that + remote system, optionally preceded by '-p' (literally) and + the 'port' from the URL when it specifies something other + than the default SSH port. ++ +To pass options to the program that you want to list in GIT_SSH +you will need to wrap the program and options into a shell script, +then set GIT_SSH to refer to the shell script. ++ +Usually it is easier to configure any desired options through your +personal `.ssh/config` file. Please consult your ssh documentation +for further details. + +'GIT_ASKPASS':: + If this environment variable is set, then Git commands which need to + acquire passwords or passphrases (e.g. for HTTP or IMAP authentication) + will call this program with a suitable prompt as command line argument + and read the password from its STDOUT. See also the 'core.askpass' + option in linkgit:git-config[1]. + +'GIT_CONFIG_NOSYSTEM':: + Whether to skip reading settings from the system-wide + `$(prefix)/etc/gitconfig` file. This environment variable can + be used along with `$HOME` and `$XDG_CONFIG_HOME` to create a + predictable environment for a picky script, or you can set it + temporarily to avoid using a buggy `/etc/gitconfig` file while + waiting for someone with sufficient permissions to fix it. + +'GIT_FLUSH':: + If this environment variable is set to "1", then commands such + as 'git blame' (in incremental mode), 'git rev-list', 'git log', + 'git check-attr' and 'git check-ignore' will + force a flush of the output stream after each record have been + flushed. If this + variable is set to "0", the output of these commands will be done + using completely buffered I/O. If this environment variable is + not set, Git will choose buffered or record-oriented flushing + based on whether stdout appears to be redirected to a file or not. + +'GIT_TRACE':: + If this variable is set to "1", "2" or "true" (comparison + is case insensitive), Git will print `trace:` messages on + stderr telling about alias expansion, built-in command + execution and external command execution. + If this variable is set to an integer value greater than 1 + and lower than 10 (strictly) then Git will interpret this + value as an open file descriptor and will try to write the + trace messages into this file descriptor. + Alternatively, if this variable is set to an absolute path + (starting with a '/' character), Git will interpret this + as a file path and will try to write the trace messages + into it. + +'GIT_TRACE_PACK_ACCESS':: + If this variable is set to a path, a file will be created at + the given path logging all accesses to any packs. For each + access, the pack file name and an offset in the pack is + recorded. This may be helpful for troubleshooting some + pack-related performance problems. + +'GIT_TRACE_PACKET':: + If this variable is set, it shows a trace of all packets + coming in or out of a given program. This can help with + debugging object negotiation or other protocol issues. Tracing + is turned off at a packet starting with "PACK". + +GIT_LITERAL_PATHSPECS:: + Setting this variable to `1` will cause Git to treat all + pathspecs literally, rather than as glob patterns. For example, + running `GIT_LITERAL_PATHSPECS=1 git log -- '*.c'` will search + for commits that touch the path `*.c`, not any paths that the + glob `*.c` matches. You might want this if you are feeding + literal paths to Git (e.g., paths previously given to you by + `git ls-tree`, `--raw` diff output, etc). + +GIT_GLOB_PATHSPECS:: + Setting this variable to `1` will cause Git to treat all + pathspecs as glob patterns (aka "glob" magic). + +GIT_NOGLOB_PATHSPECS:: + Setting this variable to `1` will cause Git to treat all + pathspecs as literal (aka "literal" magic). + +GIT_ICASE_PATHSPECS:: + Setting this variable to `1` will cause Git to treat all + pathspecs as case-insensitive. + +'GIT_REFLOG_ACTION':: + When a ref is updated, reflog entries are created to keep + track of the reason why the ref was updated (which is + typically the name of the high-level command that updated + the ref), in addition to the old and new values of the ref. + A scripted Porcelain command can use set_reflog_action + helper function in `git-sh-setup` to set its name to this + variable when it is invoked as the top level command by the + end user, to be recorded in the body of the reflog. + + +Discussion[[Discussion]] +------------------------ + +More detail on the following is available from the +link:user-manual.html#git-concepts[Git concepts chapter of the +user-manual] and linkgit:gitcore-tutorial[7]. + +A Git project normally consists of a working directory with a ".git" +subdirectory at the top level. The .git directory contains, among other +things, a compressed object database representing the complete history +of the project, an "index" file which links that history to the current +contents of the working tree, and named pointers into that history such +as tags and branch heads. + +The object database contains objects of three main types: blobs, which +hold file data; trees, which point to blobs and other trees to build up +directory hierarchies; and commits, which each reference a single tree +and some number of parent commits. + +The commit, equivalent to what other systems call a "changeset" or +"version", represents a step in the project's history, and each parent +represents an immediately preceding step. Commits with more than one +parent represent merges of independent lines of development. + +All objects are named by the SHA-1 hash of their contents, normally +written as a string of 40 hex digits. Such names are globally unique. +The entire history leading up to a commit can be vouched for by signing +just that commit. A fourth object type, the tag, is provided for this +purpose. + +When first created, objects are stored in individual files, but for +efficiency may later be compressed together into "pack files". + +Named pointers called refs mark interesting points in history. A ref +may contain the SHA-1 name of an object or the name of another ref. Refs +with names beginning `ref/head/` contain the SHA-1 name of the most +recent commit (or "head") of a branch under development. SHA-1 names of +tags of interest are stored under `ref/tags/`. A special ref named +`HEAD` contains the name of the currently checked-out branch. + +The index file is initialized with a list of all paths and, for each +path, a blob object and a set of attributes. The blob object represents +the contents of the file as of the head of the current branch. The +attributes (last modified time, size, etc.) are taken from the +corresponding file in the working tree. Subsequent changes to the +working tree can be found by comparing these attributes. The index may +be updated with new content, and new commits may be created from the +content stored in the index. + +The index is also capable of storing multiple entries (called "stages") +for a given pathname. These stages are used to hold the various +unmerged version of a file when a merge is in progress. + +FURTHER DOCUMENTATION +--------------------- + +See the references in the "description" section to get started +using Git. The following is probably more detail than necessary +for a first-time user. + +The link:user-manual.html#git-concepts[Git concepts chapter of the +user-manual] and linkgit:gitcore-tutorial[7] both provide +introductions to the underlying Git architecture. + +See linkgit:gitworkflows[7] for an overview of recommended workflows. + +See also the link:howto-index.html[howto] documents for some useful +examples. + +The internals are documented in the +link:technical/api-index.html[Git API documentation]. + +Users migrating from CVS may also want to +read linkgit:gitcvs-migration[7]. + + +Authors +------- +Git was started by Linus Torvalds, and is currently maintained by Junio +C Hamano. Numerous contributions have come from the Git mailing list +<git@vger.kernel.org>. http://www.ohloh.net/p/git/contributors/summary +gives you a more complete list of contributors. + +If you have a clone of git.git itself, the +output of linkgit:git-shortlog[1] and linkgit:git-blame[1] can show you +the authors for specific parts of the project. + +Reporting Bugs +-------------- + +Report bugs to the Git mailing list <git@vger.kernel.org> where the +development and maintenance is primarily done. You do not have to be +subscribed to the list to send a message there. + +SEE ALSO +-------- +linkgit:gittutorial[7], linkgit:gittutorial-2[7], +link:everyday.html[Everyday Git], linkgit:gitcvs-migration[7], +linkgit:gitglossary[7], linkgit:gitcore-tutorial[7], +linkgit:gitcli[7], link:user-manual.html[The Git User's Manual], +linkgit:gitworkflows[7] + +GIT +--- +Part of the linkgit:git[1] suite |