diff options
Diffstat (limited to 'Documentation/git-submodule.txt')
| -rw-r--r-- | Documentation/git-submodule.txt | 195 |
1 files changed, 195 insertions, 0 deletions
diff --git a/Documentation/git-submodule.txt b/Documentation/git-submodule.txt new file mode 100644 index 0000000000..babaa9bc46 --- /dev/null +++ b/Documentation/git-submodule.txt @@ -0,0 +1,195 @@ +git-submodule(1) +================ + +NAME +---- +git-submodule - Initialize, update or inspect submodules + + +SYNOPSIS +-------- +[verse] +'git submodule' [--quiet] add [-b branch] [--] <repository> <path> +'git submodule' [--quiet] status [--cached] [--] [<path>...] +'git submodule' [--quiet] init [--] [<path>...] +'git submodule' [--quiet] update [--init] [--] [<path>...] +'git submodule' [--quiet] summary [--summary-limit <n>] [commit] [--] [<path>...] +'git submodule' [--quiet] foreach <command> +'git submodule' [--quiet] sync [--] [<path>...] + + +DESCRIPTION +----------- +Submodules allow foreign repositories to be embedded within +a dedicated subdirectory of the source tree, always pointed +at a particular commit. + +They are not to be confused with remotes, which are meant mainly +for branches of the same project; submodules are meant for +different projects you would like to make part of your source tree, +while the history of the two projects still stays completely +independent and you cannot modify the contents of the submodule +from within the main project. +If you want to merge the project histories and want to treat the +aggregated whole as a single project from then on, you may want to +add a remote for the other project and use the 'subtree' merge strategy, +instead of treating the other project as a submodule. Directories +that come from both projects can be cloned and checked out as a whole +if you choose to go that route. + +Submodules are composed from a so-called `gitlink` tree entry +in the main repository that refers to a particular commit object +within the inner repository that is completely separate. +A record in the `.gitmodules` file at the root of the source +tree assigns a logical name to the submodule and describes +the default URL the submodule shall be cloned from. +The logical name can be used for overriding this URL within your +local repository configuration (see 'submodule init'). + +This command will manage the tree entries and contents of the +gitmodules file for you, as well as inspect the status of your +submodules and update them. +When adding a new submodule to the tree, the 'add' subcommand +is to be used. However, when pulling a tree containing submodules, +these will not be checked out by default; +the 'init' and 'update' subcommands will maintain submodules +checked out and at appropriate revision in your working tree. +You can briefly inspect the up-to-date status of your submodules +using the 'status' subcommand and get a detailed overview of the +difference between the index and checkouts using the 'summary' +subcommand. + + +COMMANDS +-------- +add:: + Add the given repository as a submodule at the given path + to the changeset to be committed next to the current + project: the current project is termed the "superproject". ++ +This requires two arguments: <repository> and <path>. ++ +<repository> is the URL of the new submodule's origin repository. +This may be either an absolute URL, or (if it begins with ./ +or ../), the location relative to the superproject's origin +repository. ++ +<path> is the relative location for the cloned submodule to +exist in the superproject. If <path> does not exist, then the +submodule is created by cloning from the named URL. If <path> does +exist and is already a valid git repository, then this is added +to the changeset without cloning. This second form is provided +to ease creating a new submodule from scratch, and presumes +the user will later push the submodule to the given URL. ++ +In either case, the given URL is recorded into .gitmodules for +use by subsequent users cloning the superproject. If the URL is +given relative to the superproject's repository, the presumption +is the superproject and submodule repositories will be kept +together in the same relative location, and only the +superproject's URL need be provided: git-submodule will correctly +locate the submodule using the relative URL in .gitmodules. + +status:: + Show the status of the submodules. This will print the SHA-1 of the + currently checked out commit for each submodule, along with the + submodule path and the output of 'git-describe' for the + SHA-1. Each SHA-1 will be prefixed with `-` if the submodule is not + initialized and `+` if the currently checked out submodule commit + does not match the SHA-1 found in the index of the containing + repository. This command is the default command for 'git-submodule'. + +init:: + Initialize the submodules, i.e. register each submodule name + and url found in .gitmodules into .git/config. + The key used in .git/config is `submodule.$name.url`. + This command does not alter existing information in .git/config. + You can then customize the submodule clone URLs in .git/config + for your local setup and proceed to 'git submodule update'; + you can also just use 'git submodule update --init' without + the explicit 'init' step if you do not intend to customize + any submodule locations. + +update:: + Update the registered submodules, i.e. clone missing submodules and + checkout the commit specified in the index of the containing repository. + This will make the submodules HEAD be detached. ++ +If the submodule is not yet initialized, and you just want to use the +setting as stored in .gitmodules, you can automatically initialize the +submodule with the --init option. + +summary:: + Show commit summary between the given commit (defaults to HEAD) and + working tree/index. For a submodule in question, a series of commits + in the submodule between the given super project commit and the + index or working tree (switched by --cached) are shown. + +foreach:: + Evaluates an arbitrary shell command in each checked out submodule. + The command has access to the variables $path and $sha1: + $path is the name of the submodule directory relative to the + superproject, and $sha1 is the commit as recorded in the superproject. + Any submodules defined in the superproject but not checked out are + ignored by this command. Unless given --quiet, foreach prints the name + of each submodule before evaluating the command. + A non-zero return from the command in any submodule causes + the processing to terminate. This can be overridden by adding '|| :' + to the end of the command. ++ +As an example, "git submodule foreach 'echo $path `git rev-parse HEAD`' will +show the path and currently checked out commit for each submodule. + +sync:: + Synchronizes submodules' remote URL configuration setting + to the value specified in .gitmodules. This is useful when + submodule URLs change upstream and you need to update your local + repositories accordingly. ++ +"git submodule sync" synchronizes all submodules while +"git submodule sync -- A" synchronizes submodule "A" only. + +OPTIONS +------- +-q:: +--quiet:: + Only print error messages. + +-b:: +--branch:: + Branch of repository to add as submodule. + +--cached:: + This option is only valid for status and summary commands. These + commands typically use the commit found in the submodule HEAD, but + with this option, the commit stored in the index is used instead. + +-n:: +--summary-limit:: + This option is only valid for the summary command. + Limit the summary size (number of commits shown in total). + Giving 0 will disable the summary; a negative number means unlimited + (the default). This limit only applies to modified submodules. The + size is always limited to 1 for added/deleted/typechanged submodules. + +<path>...:: + Paths to submodule(s). When specified this will restrict the command + to only operate on the submodules found at the specified paths. + (This argument is required with add). + +FILES +----- +When initializing submodules, a .gitmodules file in the top-level directory +of the containing repository is used to find the url of each submodule. +This file should be formatted in the same way as `$GIT_DIR/config`. The key +to each submodule url is "submodule.$name.url". See linkgit:gitmodules[5] +for details. + + +AUTHOR +------ +Written by Lars Hjemli <hjemli@gmail.com> + +GIT +--- +Part of the linkgit:git[1] suite |