diff options
Diffstat (limited to 'Documentation/git-status.txt')
| -rw-r--r-- | Documentation/git-status.txt | 213 |
1 files changed, 196 insertions, 17 deletions
diff --git a/Documentation/git-status.txt b/Documentation/git-status.txt index 335f312335..6c230c0c72 100644 --- a/Documentation/git-status.txt +++ b/Documentation/git-status.txt @@ -32,11 +32,17 @@ OPTIONS --branch:: Show the branch and tracking info even in short-format. ---porcelain:: +--show-stash:: + Show the number of entries currently stashed away. + +--porcelain[=<version>]:: Give the output in an easy-to-parse format for scripts. This is similar to the short output, but will remain stable across Git versions and regardless of user configuration. See below for details. ++ +The version parameter is used to specify the format version. +This is optional and defaults to the original version 'v1' format. --long:: Give the output in the long-format. This is the default. @@ -53,8 +59,9 @@ OPTIONS --untracked-files[=<mode>]:: Show untracked files. + -The mode parameter is optional (defaults to 'all'), and is used to -specify the handling of untracked files. +The mode parameter is used to specify the handling of untracked files. +It is optional: it defaults to 'all', and if specified, it must be +stuck to the option (e.g. `-uno`, but not `-u no`). + The possible options are: + @@ -90,12 +97,31 @@ configuration variable documented in linkgit:git-config[1]. (and suppresses the output of submodule summaries when the config option `status.submoduleSummary` is set). ---ignored:: +--ignored[=<mode>]:: Show ignored files as well. ++ +The mode parameter is used to specify the handling of ignored files. +It is optional: it defaults to 'traditional'. ++ +The possible options are: ++ + - 'traditional' - Shows ignored files and directories, unless + --untracked-files=all is specifed, in which case + individual files in ignored directories are + displayed. + - 'no' - Show no ignored files. + - 'matching' - Shows ignored files and directories matching an + ignore pattern. ++ +When 'matching' mode is specified, paths that explicity match an +ignored pattern are shown. If a directory matches an ignore pattern, +then it is shown, but not paths contained in the ignored directory. If +a directory does not match an ignore pattern, but all contents are +ignored, then the directory is not shown, but all contents are shown. -z:: Terminate entries with NUL, instead of LF. This implies - the `--porcelain` output format if no other format is given. + the `--porcelain=v1` output format if no other format is given. --column[=<options>]:: --no-column:: @@ -104,6 +130,13 @@ configuration variable documented in linkgit:git-config[1]. without options are equivalent to 'always' and 'never' respectively. +--ahead-behind:: +--no-ahead-behind:: + Display or do not display detailed ahead/behind counts for the + branch relative to its upstream branch. Defaults to true. + +<pathspec>...:: + See the 'pathspec' entry in linkgit:gitglossary[7]. OUTPUT ------ @@ -121,14 +154,15 @@ the status.relativePaths config option below. Short Format ~~~~~~~~~~~~ -In the short-format, the status of each path is shown as +In the short-format, the status of each path is shown as one of these +forms - XY PATH1 -> PATH2 + XY PATH + XY ORIG_PATH -> PATH -where `PATH1` is the path in the `HEAD`, and the " `-> PATH2`" part is -shown only when `PATH1` corresponds to a different path in the -index/worktree (i.e. the file is renamed). The `XY` is a two-letter -status code. +where `ORIG_PATH` is where the renamed/copied contents came +from. `ORIG_PATH` is only shown when the entry is renamed or +copied. The `XY` is a two-letter status code. The fields (including the `->`) are separated from each other by a single space. If a filename contains whitespace or other nonprintable @@ -155,15 +189,17 @@ in which case `XY` are `!!`. X Y Meaning ------------------------------------------------- - [MD] not updated + [AMD] not updated M [ MD] updated in index A [ MD] added to index - D [ M] deleted from index + D deleted from index R [ MD] renamed in index C [ MD] copied in index [MARC] index and work tree matches [ MARC] M work tree changed since index [ MARC] D deleted in work tree + [ D] R renamed in work tree + [ D] C copied in work tree ------------------------------------------------- D D unmerged, both deleted A U unmerged, added by us @@ -177,14 +213,25 @@ in which case `XY` are `!!`. ! ! ignored ------------------------------------------------- +Submodules have more state and instead report + M the submodule has a different HEAD than + recorded in the index + m the submodule has modified content + ? the submodule has untracked files +since modified content or untracked files in a submodule cannot be added +via `git add` in the superproject to prepare a commit. + +'m' and '?' are applied recursively. For example if a nested submodule +in a submodule contains an untracked file, this is reported as '?' as well. + If -b is used the short-format status is preceded by a line -## branchname tracking info + ## branchname tracking info -Porcelain Format -~~~~~~~~~~~~~~~~ +Porcelain Format Version 1 +~~~~~~~~~~~~~~~~~~~~~~~~~~ -The porcelain format is similar to the short format, but is guaranteed +Version 1 porcelain format is similar to the short format, but is guaranteed not to change in a backwards-incompatible way between Git versions or based on user configuration. This makes it ideal for parsing by scripts. The description of the short format above also describes the porcelain @@ -206,6 +253,125 @@ field from the first filename). Third, filenames containing special characters are not specially formatted; no quoting or backslash-escaping is performed. +Any submodule changes are reported as modified `M` instead of `m` or single `?`. + +Porcelain Format Version 2 +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Version 2 format adds more detailed information about the state of +the worktree and changed items. Version 2 also defines an extensible +set of easy to parse optional headers. + +Header lines start with "#" and are added in response to specific +command line arguments. Parsers should ignore headers they +don't recognize. + +### Branch Headers + +If `--branch` is given, a series of header lines are printed with +information about the current branch. + + Line Notes + ------------------------------------------------------------ + # branch.oid <commit> | (initial) Current commit. + # branch.head <branch> | (detached) Current branch. + # branch.upstream <upstream_branch> If upstream is set. + # branch.ab +<ahead> -<behind> If upstream is set and + the commit is present. + ------------------------------------------------------------ + +### Changed Tracked Entries + +Following the headers, a series of lines are printed for tracked +entries. One of three different line formats may be used to describe +an entry depending on the type of change. Tracked entries are printed +in an undefined order; parsers should allow for a mixture of the 3 +line types in any order. + +Ordinary changed entries have the following format: + + 1 <XY> <sub> <mH> <mI> <mW> <hH> <hI> <path> + +Renamed or copied entries have the following format: + + 2 <XY> <sub> <mH> <mI> <mW> <hH> <hI> <X><score> <path><sep><origPath> + + Field Meaning + -------------------------------------------------------- + <XY> A 2 character field containing the staged and + unstaged XY values described in the short format, + with unchanged indicated by a "." rather than + a space. + <sub> A 4 character field describing the submodule state. + "N..." when the entry is not a submodule. + "S<c><m><u>" when the entry is a submodule. + <c> is "C" if the commit changed; otherwise ".". + <m> is "M" if it has tracked changes; otherwise ".". + <u> is "U" if there are untracked changes; otherwise ".". + <mH> The octal file mode in HEAD. + <mI> The octal file mode in the index. + <mW> The octal file mode in the worktree. + <hH> The object name in HEAD. + <hI> The object name in the index. + <X><score> The rename or copy score (denoting the percentage + of similarity between the source and target of the + move or copy). For example "R100" or "C75". + <path> The pathname. In a renamed/copied entry, this + is the target path. + <sep> When the `-z` option is used, the 2 pathnames are separated + with a NUL (ASCII 0x00) byte; otherwise, a tab (ASCII 0x09) + byte separates them. + <origPath> The pathname in the commit at HEAD or in the index. + This is only present in a renamed/copied entry, and + tells where the renamed/copied contents came from. + -------------------------------------------------------- + +Unmerged entries have the following format; the first character is +a "u" to distinguish from ordinary changed entries. + + u <xy> <sub> <m1> <m2> <m3> <mW> <h1> <h2> <h3> <path> + + Field Meaning + -------------------------------------------------------- + <XY> A 2 character field describing the conflict type + as described in the short format. + <sub> A 4 character field describing the submodule state + as described above. + <m1> The octal file mode in stage 1. + <m2> The octal file mode in stage 2. + <m3> The octal file mode in stage 3. + <mW> The octal file mode in the worktree. + <h1> The object name in stage 1. + <h2> The object name in stage 2. + <h3> The object name in stage 3. + <path> The pathname. + -------------------------------------------------------- + +### Other Items + +Following the tracked entries (and if requested), a series of +lines will be printed for untracked and then ignored items +found in the worktree. + +Untracked items have the following format: + + ? <path> + +Ignored items have the following format: + + ! <path> + +### Pathname Format Notes and -z + +When the `-z` option is given, pathnames are printed as is and +without any quoting and lines are terminated with a NUL (ASCII 0x00) +byte. + +Without the `-z` option, pathnames with "unusual" characters are +quoted as explained for the configuration variable `core.quotePath` +(see linkgit:git-config[1]). + + CONFIGURATION ------------- @@ -229,6 +395,19 @@ ignored submodules you can either use the --ignore-submodules=dirty command line option or the 'git submodule summary' command, which shows a similar output but does not honor these settings. +BACKGROUND REFRESH +------------------ + +By default, `git status` will automatically refresh the index, updating +the cached stat information from the working tree and writing out the +result. Writing out the updated index is an optimization that isn't +strictly necessary (`status` computes the values for itself, but writing +them out is just to save subsequent programs from repeating our +computation). When `status` is run in the background, the lock held +during the write may conflict with other simultaneous processes, causing +them to fail. Scripts running `status` in the background should consider +using `git --no-optional-locks status` (see linkgit:git[1] for details). + SEE ALSO -------- linkgit:gitignore[5] |