diff options
Diffstat (limited to 'Documentation/git-stash.txt')
| -rw-r--r-- | Documentation/git-stash.txt | 123 |
1 files changed, 77 insertions, 46 deletions
diff --git a/Documentation/git-stash.txt b/Documentation/git-stash.txt index 8728f7a514..00f95fee1f 100644 --- a/Documentation/git-stash.txt +++ b/Documentation/git-stash.txt @@ -13,9 +13,14 @@ SYNOPSIS 'git stash' drop [-q|--quiet] [<stash>] 'git stash' ( pop | apply ) [--index] [-q|--quiet] [<stash>] 'git stash' branch <branchname> [<stash>] -'git stash' [save [--patch] [-k|--[no-]keep-index] [-q|--quiet] [<message>]] +'git stash' save [-p|--patch] [-k|--[no-]keep-index] [-q|--quiet] + [-u|--include-untracked] [-a|--all] [<message>] +'git stash' [push [-p|--patch] [-k|--[no-]keep-index] [-q|--quiet] + [-u|--include-untracked] [-a|--all] [-m|--message <message>]] + [--] [<pathspec>...]] 'git stash' clear -'git stash' create +'git stash' create [<message>] +'git stash' store [-m|--message <message>] [-q|--quiet] <commit> DESCRIPTION ----------- @@ -35,41 +40,59 @@ you create one. The latest stash you created is stored in `refs/stash`; older stashes are found in the reflog of this reference and can be named using -the usual reflog syntax (e.g. `stash@\{0}` is the most recently -created stash, `stash@\{1}` is the one before it, `stash@\{2.hours.ago}` -is also possible). +the usual reflog syntax (e.g. `stash@{0}` is the most recently +created stash, `stash@{1}` is the one before it, `stash@{2.hours.ago}` +is also possible). Stashes may also be referenced by specifying just the +stash index (e.g. the integer `n` is equivalent to `stash@{n}`). OPTIONS ------- -save [--patch] [--[no-]keep-index] [-q|--quiet] [<message>]:: +save [-p|--patch] [-k|--[no-]keep-index] [-u|--include-untracked] [-a|--all] [-q|--quiet] [<message>]:: +push [-p|--patch] [-k|--[no-]keep-index] [-u|--include-untracked] [-a|--all] [-q|--quiet] [-m|--message <message>] [--] [<pathspec>...]:: - Save your local modifications to a new 'stash', and run `git reset - --hard` to revert them. The <message> part is optional and gives - the description along with the stashed state. For quickly making - a snapshot, you can omit _both_ "save" and <message>, but giving - only <message> does not trigger this action to prevent a misspelled - subcommand from making an unwanted stash. + Save your local modifications to a new 'stash entry' and roll them + back to HEAD (in the working tree and in the index). + The <message> part is optional and gives + the description along with the stashed state. ++ +For quickly making a snapshot, you can omit "push". In this mode, +non-option arguments are not allowed to prevent a misspelled +subcommand from making an unwanted stash entry. The two exceptions to this +are `stash -p` which acts as alias for `stash push -p` and pathspecs, +which are allowed after a double hyphen `--` for disambiguation. ++ +When pathspec is given to 'git stash push', the new stash entry records the +modified states only for the files that match the pathspec. The index +entries and working tree files are then rolled back to the state in +HEAD only for these files, too, leaving files that do not match the +pathspec intact. + If the `--keep-index` option is used, all changes already added to the index are left intact. + -With `--patch`, you can interactively select hunks from in the diff +If the `--include-untracked` option is used, all untracked files are also +stashed and then cleaned up with `git clean`, leaving the working directory +in a very clean state. If the `--all` option is used instead then the +ignored files are stashed and cleaned in addition to the untracked files. ++ +With `--patch`, you can interactively select hunks from the diff between HEAD and the working tree to be stashed. The stash entry is constructed such that its index state is the same as the index state of your repository, and its worktree contains only the changes you selected interactively. The selected changes are then rolled back -from your worktree. +from your worktree. See the ``Interactive Mode'' section of +linkgit:git-add[1] to learn how to operate the `--patch` mode. + The `--patch` option implies `--keep-index`. You can use `--no-keep-index` to override this. list [<options>]:: - List the stashes that you currently have. Each 'stash' is listed - with its name (e.g. `stash@\{0}` is the latest stash, `stash@\{1}` is + List the stash entries that you currently have. Each 'stash entry' is + listed with its name (e.g. `stash@{0}` is the latest entry, `stash@{1}` is the one before, etc.), the name of the branch that was current when the - stash was made, and a short description of the commit the stash was + entry was made, and a short description of the commit the entry was based on. + ---------------------------------------------------------------- @@ -82,11 +105,14 @@ command to control what is shown and how. See linkgit:git-log[1]. show [<stash>]:: - Show the changes recorded in the stash as a diff between the - stashed state and its original parent. When no `<stash>` is given, - shows the latest one. By default, the command shows the diffstat, but - it will accept any format known to 'git diff' (e.g., `git stash show - -p stash@\{1}` to view the second most recent stash in patch form). + Show the changes recorded in the stash entry as a diff between the + stashed contents and the commit back when the stash entry was first + created. When no `<stash>` is given, it shows the latest one. + By default, the command shows the diffstat, but it will accept any + format known to 'git diff' (e.g., `git stash show -p stash@{1}` + to view the second most recent entry in patch form). + You can use stash.showStat and/or stash.showPatch config variables + to change the default behavior. pop [--index] [-q|--quiet] [<stash>]:: @@ -104,8 +130,8 @@ tree's changes, but also the index's ones. However, this can fail, when you have conflicts (which are stored in the index, where you therefore can no longer apply the changes as they were originally). + -When no `<stash>` is given, `stash@\{0}` is assumed, otherwise `<stash>` must -be a reference of the form `stash@\{<revision>}`. +When no `<stash>` is given, `stash@{0}` is assumed, otherwise `<stash>` must +be a reference of the form `stash@{<revision>}`. apply [--index] [-q|--quiet] [<stash>]:: @@ -124,35 +150,44 @@ branch <branchname> [<stash>]:: + This is useful if the branch on which you ran `git stash save` has changed enough that `git stash apply` fails due to conflicts. Since -the stash is applied on top of the commit that was HEAD at the time -`git stash` was run, it restores the originally stashed state with -no conflicts. +the stash entry is applied on top of the commit that was HEAD at the +time `git stash` was run, it restores the originally stashed state +with no conflicts. clear:: - Remove all the stashed states. Note that those states will then + Remove all the stash entries. Note that those entries will then be subject to pruning, and may be impossible to recover (see 'Examples' below for a possible strategy). drop [-q|--quiet] [<stash>]:: - Remove a single stashed state from the stash list. When no `<stash>` - is given, it removes the latest one. i.e. `stash@\{0}`, otherwise - `<stash>` must a valid stash log reference of the form - `stash@\{<revision>}`. + Remove a single stash entry from the list of stash entries. + When no `<stash>` is given, it removes the latest one. + i.e. `stash@{0}`, otherwise `<stash>` must be a valid stash + log reference of the form `stash@{<revision>}`. create:: - Create a stash (which is a regular commit object) and return its - object name, without storing it anywhere in the ref namespace. + Create a stash entry (which is a regular commit object) and + return its object name, without storing it anywhere in the ref + namespace. + This is intended to be useful for scripts. It is probably not + the command you want to use; see "save" above. +store:: + + Store a given stash created via 'git stash create' (which is a + dangling merge commit) in the stash ref, updating the stash + reflog. This is intended to be useful for scripts. It is + probably not the command you want to use; see "save" above. DISCUSSION ---------- -A stash is represented as a commit whose tree records the state of the -working directory, and its first parent is the commit at `HEAD` when -the stash was created. The tree of the second parent records the -state of the index when the stash is made, and it is made a child of +A stash entry is represented as a commit whose tree records the state +of the working directory, and its first parent is the commit at `HEAD` +when the entry was created. The tree of the second parent records the +state of the index when the entry is made, and it is made a child of the `HEAD` commit. The ancestry graph looks like this: .----W @@ -236,12 +271,12 @@ $ edit/build/test remaining parts $ git commit foo -m 'Remaining parts' ---------------------------------------------------------------- -Recovering stashes that were cleared/dropped erroneously:: +Recovering stash entries that were cleared/dropped erroneously:: -If you mistakenly drop or clear stashes, they cannot be recovered +If you mistakenly drop or clear stash entries, they cannot be recovered through the normal safety mechanisms. However, you can try the -following incantation to get a list of stashes that are still in your -repository, but not reachable any more: +following incantation to get a list of stash entries that are still in +your repository, but not reachable any more: + ---------------------------------------------------------------- git fsck --unreachable | @@ -257,10 +292,6 @@ linkgit:git-commit[1], linkgit:git-reflog[1], linkgit:git-reset[1] -AUTHOR ------- -Written by Nanako Shiraishi <nanako3@bluebottle.com> - GIT --- Part of the linkgit:git[1] suite |