diff options
Diffstat (limited to 'Documentation/git-stash.txt')
| -rw-r--r-- | Documentation/git-stash.txt | 95 |
1 files changed, 70 insertions, 25 deletions
diff --git a/Documentation/git-stash.txt b/Documentation/git-stash.txt index 1c64a02fe5..375213fe46 100644 --- a/Documentation/git-stash.txt +++ b/Documentation/git-stash.txt @@ -13,14 +13,16 @@ SYNOPSIS 'git stash' drop [-q|--quiet] [<stash>] 'git stash' ( pop | apply ) [--index] [-q|--quiet] [<stash>] 'git stash' branch <branchname> [<stash>] -'git stash' [save [--keep-index] [-q|--quiet] [<message>]] +'git stash' [save [-p|--patch] [-k|--[no-]keep-index] [-q|--quiet] + [-u|--include-untracked] [-a|--all] [<message>]] 'git stash' clear -'git stash' create +'git stash' create [<message>] +'git stash' store [-m|--message <message>] [-q|--quiet] <commit> DESCRIPTION ----------- -Use 'git stash' when you want to record the current state of the +Use `git stash` when you want to record the current state of the working directory and the index, but want to go back to a clean working directory. The command saves your local modifications away and reverts the working directory to match the `HEAD` commit. @@ -33,29 +35,47 @@ A stash is by default listed as "WIP on 'branchname' ...", but you can give a more descriptive message on the command line when you create one. -The latest stash you created is stored in `$GIT_DIR/refs/stash`; older +The latest stash you created is stored in `refs/stash`; older stashes are found in the reflog of this reference and can be named using -the usual reflog syntax (e.g. `stash@\{0}` is the most recently -created stash, `stash@\{1}` is the one before it, `stash@\{2.hours.ago}` +the usual reflog syntax (e.g. `stash@{0}` is the most recently +created stash, `stash@{1}` is the one before it, `stash@{2.hours.ago}` is also possible). OPTIONS ------- -save [--keep-index] [-q|--quiet] [<message>]:: +save [-p|--patch] [-k|--[no-]keep-index] [-u|--include-untracked] [-a|--all] [-q|--quiet] [<message>]:: Save your local modifications to a new 'stash', and run `git reset - --hard` to revert them. This is the default action when no - subcommand is given. The <message> part is optional and gives - the description along with the stashed state. + --hard` to revert them. The <message> part is optional and gives + the description along with the stashed state. For quickly making + a snapshot, you can omit _both_ "save" and <message>, but giving + only <message> does not trigger this action to prevent a misspelled + subcommand from making an unwanted stash. + If the `--keep-index` option is used, all changes already added to the index are left intact. ++ +If the `--include-untracked` option is used, all untracked files are also +stashed and then cleaned up with `git clean`, leaving the working directory +in a very clean state. If the `--all` option is used instead then the +ignored files are stashed and cleaned in addition to the untracked files. ++ +With `--patch`, you can interactively select hunks from the diff +between HEAD and the working tree to be stashed. The stash entry is +constructed such that its index state is the same as the index state +of your repository, and its worktree contains only the changes you +selected interactively. The selected changes are then rolled back +from your worktree. See the ``Interactive Mode'' section of +linkgit:git-add[1] to learn how to operate the `--patch` mode. ++ +The `--patch` option implies `--keep-index`. You can use +`--no-keep-index` to override this. list [<options>]:: List the stashes that you currently have. Each 'stash' is listed - with its name (e.g. `stash@\{0}` is the latest stash, `stash@\{1}` is + with its name (e.g. `stash@{0}` is the latest stash, `stash@{1}` is the one before, etc.), the name of the branch that was current when the stash was made, and a short description of the commit the stash was based on. @@ -65,7 +85,7 @@ stash@{0}: WIP on submit: 6ebd0e2... Update git-stash documentation stash@{1}: On master: 9cc0589... Add git-stash ---------------------------------------------------------------- + -The command takes options applicable to the 'git-log' +The command takes options applicable to the 'git log' command to control what is shown and how. See linkgit:git-log[1]. show [<stash>]:: @@ -73,8 +93,8 @@ show [<stash>]:: Show the changes recorded in the stash as a diff between the stashed state and its original parent. When no `<stash>` is given, shows the latest one. By default, the command shows the diffstat, but - it will accept any format known to 'git-diff' (e.g., `git stash show - -p stash@\{1}` to view the second most recent stash in patch form). + it will accept any format known to 'git diff' (e.g., `git stash show + -p stash@{1}` to view the second most recent stash in patch form). pop [--index] [-q|--quiet] [<stash>]:: @@ -92,18 +112,22 @@ tree's changes, but also the index's ones. However, this can fail, when you have conflicts (which are stored in the index, where you therefore can no longer apply the changes as they were originally). + -When no `<stash>` is given, `stash@\{0}` is assumed. +When no `<stash>` is given, `stash@{0}` is assumed, otherwise `<stash>` must +be a reference of the form `stash@{<revision>}`. apply [--index] [-q|--quiet] [<stash>]:: - Like `pop`, but do not remove the state from the stash list. + Like `pop`, but do not remove the state from the stash list. Unlike `pop`, + `<stash>` may be any commit that looks like a commit created by + `stash save` or `stash create`. branch <branchname> [<stash>]:: Creates and checks out a new branch named `<branchname>` starting from the commit at which the `<stash>` was originally created, applies the - changes recorded in `<stash>` to the new working tree and index, then - drops the `<stash>` if that completes successfully. When no `<stash>` + changes recorded in `<stash>` to the new working tree and index. + If that succeeds, and `<stash>` is a reference of the form + `stash@{<revision>}`, it then drops the `<stash>`. When no `<stash>` is given, applies the latest one. + This is useful if the branch on which you ran `git stash save` has @@ -114,18 +138,29 @@ no conflicts. clear:: Remove all the stashed states. Note that those states will then - be subject to pruning, and may be difficult or impossible to recover. + be subject to pruning, and may be impossible to recover (see + 'Examples' below for a possible strategy). drop [-q|--quiet] [<stash>]:: Remove a single stashed state from the stash list. When no `<stash>` - is given, it removes the latest one. i.e. `stash@\{0}` + is given, it removes the latest one. i.e. `stash@{0}`, otherwise + `<stash>` must be a valid stash log reference of the form + `stash@{<revision>}`. create:: Create a stash (which is a regular commit object) and return its object name, without storing it anywhere in the ref namespace. + This is intended to be useful for scripts. It is probably not + the command you want to use; see "save" above. +store:: + + Store a given stash created via 'git stash create' (which is a + dangling merge commit) in the stash ref, updating the stash + reflog. This is intended to be useful for scripts. It is + probably not the command you want to use; see "save" above. DISCUSSION ---------- @@ -188,7 +223,7 @@ $ git reset --soft HEAD^ # ... continue hacking ... ---------------------------------------------------------------- + -You can use 'git-stash' to simplify the above, like this: +You can use 'git stash' to simplify the above, like this: + ---------------------------------------------------------------- # ... hack hack hack ... @@ -217,6 +252,20 @@ $ edit/build/test remaining parts $ git commit foo -m 'Remaining parts' ---------------------------------------------------------------- +Recovering stashes that were cleared/dropped erroneously:: + +If you mistakenly drop or clear stashes, they cannot be recovered +through the normal safety mechanisms. However, you can try the +following incantation to get a list of stashes that are still in your +repository, but not reachable any more: ++ +---------------------------------------------------------------- +git fsck --unreachable | +grep commit | cut -d\ -f3 | +xargs git log --merges --no-walk --grep=WIP +---------------------------------------------------------------- + + SEE ALSO -------- linkgit:git-checkout[1], @@ -224,10 +273,6 @@ linkgit:git-commit[1], linkgit:git-reflog[1], linkgit:git-reset[1] -AUTHOR ------- -Written by Nanako Shiraishi <nanako3@bluebottle.com> - GIT --- Part of the linkgit:git[1] suite |