diff options
Diffstat (limited to 'Documentation/git-send-email.txt')
| -rw-r--r-- | Documentation/git-send-email.txt | 151 |
1 files changed, 114 insertions, 37 deletions
diff --git a/Documentation/git-send-email.txt b/Documentation/git-send-email.txt index 327233c85b..b9134d234f 100644 --- a/Documentation/git-send-email.txt +++ b/Documentation/git-send-email.txt @@ -20,7 +20,7 @@ files in the directory), or directly as a revision list. In the last case, any format accepted by linkgit:git-format-patch[1] can be passed to git send-email. -The header of the email is configurable by command line options. If not +The header of the email is configurable via command-line options. If not specified on the command line, the user will be prompted with a ReadLine enabled interface to provide the necessary information. @@ -45,20 +45,21 @@ Composing ~~~~~~~~~ --annotate:: - Review and edit each patch you're about to send. See the - CONFIGURATION section for 'sendemail.multiedit'. + Review and edit each patch you're about to send. Default is the value + of 'sendemail.annotate'. See the CONFIGURATION section for + 'sendemail.multiEdit'. ---bcc=<address>:: +--bcc=<address>,...:: Specify a "Bcc:" value for each email. Default is the value of 'sendemail.bcc'. + -The --bcc option must be repeated for each user you want on the bcc list. +This option may be specified multiple times. ---cc=<address>:: +--cc=<address>,...:: Specify a starting "Cc:" value for each email. Default is the value of 'sendemail.cc'. + -The --cc option must be repeated for each user you want on the cc list. +This option may be specified multiple times. --compose:: Invoke a text editor (see GIT_EDITOR in linkgit:git-var[1]) @@ -67,17 +68,17 @@ The --cc option must be repeated for each user you want on the cc list. When '--compose' is used, git send-email will use the From, Subject, and In-Reply-To headers specified in the message. If the body of the message (what you type after the headers and a blank line) only contains blank -(or GIT: prefixed) lines the summary won't be sent, but From, Subject, +(or Git: prefixed) lines, the summary won't be sent, but From, Subject, and In-Reply-To headers will be used unless they are removed. + Missing From or In-Reply-To headers will be prompted for. + -See the CONFIGURATION section for 'sendemail.multiedit'. +See the CONFIGURATION section for 'sendemail.multiEdit'. --from=<address>:: Specify the sender of the emails. If not specified on the command line, the value of the 'sendemail.from' configuration option is used. If - neither the command line option nor 'sendemail.from' are set, then the + neither the command-line option nor 'sendemail.from' are set, then the user will be prompted for the value. The default for the prompt will be the value of GIT_AUTHOR_IDENT, or GIT_COMMITTER_IDENT if that is not set, as returned by "git var -l". @@ -109,13 +110,13 @@ is not set, this will be prompted for. Only necessary if --compose is also set. If --compose is not set, this will be prompted for. ---to=<address>:: +--to=<address>,...:: Specify the primary recipient of the emails generated. Generally, this will be the upstream maintainer of the project involved. Default is the value of the 'sendemail.to' configuration value; if that is unspecified, and --to-cmd is not specified, this will be prompted for. + -The --to option must be repeated for each user you want on the to list. +This option may be specified multiple times. --8bit-encoding=<encoding>:: When encountering a non-ASCII message or subject that does not @@ -126,6 +127,25 @@ The --to option must be repeated for each user you want on the to list. + Note that no attempts whatsoever are made to validate the encoding. +--compose-encoding=<encoding>:: + Specify encoding of compose message. Default is the value of the + 'sendemail.composeencoding'; if that is unspecified, UTF-8 is assumed. + +--transfer-encoding=(7bit|8bit|quoted-printable|base64):: + Specify the transfer encoding to be used to send the message over SMTP. + 7bit will fail upon encountering a non-ASCII message. quoted-printable + can be useful when the repository contains files that contain carriage + returns, but makes the raw patch email file (as saved from a MUA) much + harder to inspect manually. base64 is even more fool proof, but also + even more opaque. Default is the value of the 'sendemail.transferEncoding' + configuration value; if that is unspecified, git will use 8bit and not + add a Content-Transfer-Encoding header. + +--xmailer:: +--no-xmailer:: + Add (or prevent adding) the "X-Mailer:" header. By default, + the header is added, but it can be turned off by setting the + `sendemail.xmailer` configuration variable to `false`. Sending ~~~~~~~ @@ -136,39 +156,52 @@ Sending subscribed to a list. In order to use the 'From' address, set the value to "auto". If you use the sendmail binary, you must have suitable privileges for the -f parameter. Default is the value of the - 'sendemail.envelopesender' configuration variable; if that is + 'sendemail.envelopeSender' configuration variable; if that is unspecified, choosing the envelope sender is left to your MTA. --smtp-encryption=<encryption>:: Specify the encryption to use, either 'ssl' or 'tls'. Any other value reverts to plain SMTP. Default is the value of - 'sendemail.smtpencryption'. + 'sendemail.smtpEncryption'. --smtp-domain=<FQDN>:: Specifies the Fully Qualified Domain Name (FQDN) used in the HELO/EHLO command to the SMTP server. Some servers require the FQDN to match your IP address. If not set, git send-email attempts to determine your FQDN automatically. Default is the value of - 'sendemail.smtpdomain'. + 'sendemail.smtpDomain'. + +--smtp-auth=<mechanisms>:: + Whitespace-separated list of allowed SMTP-AUTH mechanisms. This setting + forces using only the listed mechanisms. Example: ++ +------ +$ git send-email --smtp-auth="PLAIN LOGIN GSSAPI" ... +------ ++ +If at least one of the specified mechanisms matches the ones advertised by the +SMTP server and if it is supported by the utilized SASL library, the mechanism +is used for authentication. If neither 'sendemail.smtpAuth' nor '--smtp-auth' +is specified, all mechanisms supported by the SASL library can be used. --smtp-pass[=<password>]:: Password for SMTP-AUTH. The argument is optional: If no argument is specified, then the empty string is used as - the password. Default is the value of 'sendemail.smtppass', + the password. Default is the value of 'sendemail.smtpPass', however '--smtp-pass' always overrides this value. + Furthermore, passwords need not be specified in configuration files or on the command line. If a username has been specified (with -'--smtp-user' or a 'sendemail.smtpuser'), but no password has been -specified (with '--smtp-pass' or 'sendemail.smtppass'), then the -user is prompted for a password while the input is masked for privacy. +'--smtp-user' or a 'sendemail.smtpUser'), but no password has been +specified (with '--smtp-pass' or 'sendemail.smtpPass'), then +a password is obtained using 'git-credential'. --smtp-server=<host>:: If set, specifies the outgoing SMTP server to use (e.g. `smtp.example.com` or a raw IP address). Alternatively it can specify a full pathname of a sendmail-like program instead; the program must support the `-i` option. Default value can - be specified by the 'sendemail.smtpserver' configuration + be specified by the 'sendemail.smtpServer' configuration option; the built-in default is `/usr/sbin/sendmail` or `/usr/lib/sendmail` if such program is available, or `localhost` otherwise. @@ -179,11 +212,11 @@ user is prompted for a password while the input is masked for privacy. submission port 587, or the common SSL smtp port 465); symbolic port names (e.g. "submission" instead of 587) are also accepted. The port can also be set with the - 'sendemail.smtpserverport' configuration variable. + 'sendemail.smtpServerPort' configuration variable. --smtp-server-option=<option>:: If set, specifies the outgoing SMTP server option to use. - Default value can be specified by the 'sendemail.smtpserveroption' + Default value can be specified by the 'sendemail.smtpServerOption' configuration option. + The --smtp-server-option option must be repeated for each option you want @@ -193,11 +226,26 @@ must be used for each option. --smtp-ssl:: Legacy alias for '--smtp-encryption ssl'. +--smtp-ssl-cert-path:: + Path to a store of trusted CA certificates for SMTP SSL/TLS + certificate validation (either a directory that has been processed + by 'c_rehash', or a single file containing one or more PEM format + certificates concatenated together: see verify(1) -CAfile and + -CApath for more information on these). Set it to an empty string + to disable certificate verification. Defaults to the value of the + 'sendemail.smtpsslcertpath' configuration variable, if set, or the + backing SSL library's compiled-in default otherwise (which should + be the best choice on most platforms). + --smtp-user=<user>:: - Username for SMTP-AUTH. Default is the value of 'sendemail.smtpuser'; - if a username is not specified (with '--smtp-user' or 'sendemail.smtpuser'), + Username for SMTP-AUTH. Default is the value of 'sendemail.smtpUser'; + if a username is not specified (with '--smtp-user' or 'sendemail.smtpUser'), then authentication is not attempted. +--smtp-debug=0|1:: + Enable (1) or disable (0) debug output. If enabled, SMTP + commands and replies will be printed. Useful to debug TLS + connection and authentication problems. Automating ~~~~~~~~~~ @@ -212,14 +260,14 @@ Automating Specify a command to execute once per patch file which should generate patch file specific "Cc:" entries. Output of this command must be single email address per line. - Default is the value of 'sendemail.cccmd' configuration value. + Default is the value of 'sendemail.ccCmd' configuration value. --[no-]chain-reply-to:: If this is set, each email will be sent as a reply to the previous email sent. If disabled with "--no-chain-reply-to", all emails after the first will be sent as replies to the first email sent. When using this, it is recommended that the first file given be an overview of the - entire patch series. Disabled by default, but the 'sendemail.chainreplyto' + entire patch series. Disabled by default, but the 'sendemail.chainReplyTo' configuration variable can be used to enable it. --identity=<identity>:: @@ -233,6 +281,18 @@ Automating cc list. Default is the value of 'sendemail.signedoffbycc' configuration value; if that is unspecified, default to --signed-off-by-cc. +--[no-]cc-cover:: + If this is set, emails found in Cc: headers in the first patch of + the series (typically the cover letter) are added to the cc list + for each email set. Default is the value of 'sendemail.cccover' + configuration value; if that is unspecified, default to --no-cc-cover. + +--[no-]to-cover:: + If this is set, emails found in To: headers in the first patch of + the series (typically the cover letter) are added to the to list + for each email set. Default is the value of 'sendemail.tocover' + configuration value; if that is unspecified, default to --no-to-cover. + --suppress-cc=<category>:: Specify an additional category of recipients to suppress the auto-cc of: @@ -257,7 +317,7 @@ specified, as well as 'body' if --no-signed-off-cc is specified. --[no-]suppress-from:: If this is set, do not add the From: address to the cc: list. - Default is the value of 'sendemail.suppressfrom' configuration + Default is the value of 'sendemail.suppressFrom' configuration value; if that is unspecified, default to --no-suppress-from. --[no-]thread:: @@ -330,15 +390,32 @@ default to '--validate'. CONFIGURATION ------------- -sendemail.aliasesfile:: +sendemail.aliasesFile:: To avoid typing long email addresses, point this to one or more - email aliases files. You must also supply 'sendemail.aliasfiletype'. + email aliases files. You must also supply 'sendemail.aliasFileType'. -sendemail.aliasfiletype:: - Format of the file(s) specified in sendemail.aliasesfile. Must be - one of 'mutt', 'mailrc', 'pine', 'elm', or 'gnus'. +sendemail.aliasFileType:: + Format of the file(s) specified in sendemail.aliasesFile. Must be + one of 'mutt', 'mailrc', 'pine', 'elm', or 'gnus', or 'sendmail'. ++ +What an alias file in each format looks like can be found in +the documentation of the email program of the same name. The +differences and limitations from the standard formats are +described below: ++ +-- +sendmail;; +* Quoted aliases and quoted addresses are not supported: lines that + contain a `"` symbol are ignored. +* Redirection to a file (`/path/name`) or pipe (`|command`) is not + supported. +* File inclusion (`:include: /path/name`) is not supported. +* Warnings are printed on the standard error output for any + explicitly unsupported constructs, and any other lines that are not + recognized by the parser. +-- -sendemail.multiedit:: +sendemail.multiEdit:: If true (default), a single editor instance will be spawned to edit files you have to edit (patches when '--annotate' is used, and the summary when '--compose' is used). If false, files will be edited one @@ -357,10 +434,10 @@ To use 'git send-email' to send your patches through the GMail SMTP server, edit ~/.gitconfig to specify your account settings: [sendemail] - smtpencryption = tls - smtpserver = smtp.gmail.com - smtpuser = yourname@gmail.com - smtpserverport = 587 + smtpEncryption = tls + smtpServer = smtp.gmail.com + smtpUser = yourname@gmail.com + smtpServerPort = 587 Once your commits are ready to be sent to the mailing list, run the following commands: |