diff options
Diffstat (limited to 'Documentation/git-send-email.txt')
| -rw-r--r-- | Documentation/git-send-email.txt | 127 |
1 files changed, 82 insertions, 45 deletions
diff --git a/Documentation/git-send-email.txt b/Documentation/git-send-email.txt index 7ae467ba41..642d0ef199 100644 --- a/Documentation/git-send-email.txt +++ b/Documentation/git-send-email.txt @@ -10,6 +10,7 @@ SYNOPSIS -------- [verse] 'git send-email' [options] <file|directory|rev-list options>... +'git send-email' --dump-aliases DESCRIPTION @@ -46,26 +47,26 @@ Composing --annotate:: Review and edit each patch you're about to send. Default is the value - of 'sendemail.annotate'. See the CONFIGURATION section for - 'sendemail.multiEdit'. + of `sendemail.annotate`. See the CONFIGURATION section for + `sendemail.multiEdit`. ---bcc=<address>:: +--bcc=<address>,...:: Specify a "Bcc:" value for each email. Default is the value of - 'sendemail.bcc'. + `sendemail.bcc`. + -The --bcc option must be repeated for each user you want on the bcc list. +This option may be specified multiple times. ---cc=<address>:: +--cc=<address>,...:: Specify a starting "Cc:" value for each email. - Default is the value of 'sendemail.cc'. + Default is the value of `sendemail.cc`. + -The --cc option must be repeated for each user you want on the cc list. +This option may be specified multiple times. --compose:: Invoke a text editor (see GIT_EDITOR in linkgit:git-var[1]) to edit an introductory message for the patch series. + -When '--compose' is used, git send-email will use the From, Subject, and +When `--compose` is used, git send-email will use the From, Subject, and In-Reply-To headers specified in the message. If the body of the message (what you type after the headers and a blank line) only contains blank (or Git: prefixed) lines, the summary won't be sent, but From, Subject, @@ -73,12 +74,12 @@ and In-Reply-To headers will be used unless they are removed. + Missing From or In-Reply-To headers will be prompted for. + -See the CONFIGURATION section for 'sendemail.multiEdit'. +See the CONFIGURATION section for `sendemail.multiEdit`. --from=<address>:: Specify the sender of the emails. If not specified on the command line, - the value of the 'sendemail.from' configuration option is used. If - neither the command-line option nor 'sendemail.from' are set, then the + the value of the `sendemail.from` configuration option is used. If + neither the command-line option nor `sendemail.from` are set, then the user will be prompted for the value. The default for the prompt will be the value of GIT_AUTHOR_IDENT, or GIT_COMMITTER_IDENT if that is not set, as returned by "git var -l". @@ -110,13 +111,13 @@ is not set, this will be prompted for. Only necessary if --compose is also set. If --compose is not set, this will be prompted for. ---to=<address>:: +--to=<address>,...:: Specify the primary recipient of the emails generated. Generally, this will be the upstream maintainer of the project involved. Default is the - value of the 'sendemail.to' configuration value; if that is unspecified, + value of the `sendemail.to` configuration value; if that is unspecified, and --to-cmd is not specified, this will be prompted for. + -The --to option must be repeated for each user you want on the to list. +This option may be specified multiple times. --8bit-encoding=<encoding>:: When encountering a non-ASCII message or subject that does not @@ -137,7 +138,7 @@ Note that no attempts whatsoever are made to validate the encoding. can be useful when the repository contains files that contain carriage returns, but makes the raw patch email file (as saved from a MUA) much harder to inspect manually. base64 is even more fool proof, but also - even more opaque. Default is the value of the 'sendemail.transferEncoding' + even more opaque. Default is the value of the `sendemail.transferEncoding` configuration value; if that is unspecified, git will use 8bit and not add a Content-Transfer-Encoding header. @@ -156,31 +157,44 @@ Sending subscribed to a list. In order to use the 'From' address, set the value to "auto". If you use the sendmail binary, you must have suitable privileges for the -f parameter. Default is the value of the - 'sendemail.envelopeSender' configuration variable; if that is + `sendemail.envelopeSender` configuration variable; if that is unspecified, choosing the envelope sender is left to your MTA. --smtp-encryption=<encryption>:: Specify the encryption to use, either 'ssl' or 'tls'. Any other value reverts to plain SMTP. Default is the value of - 'sendemail.smtpEncryption'. + `sendemail.smtpEncryption`. --smtp-domain=<FQDN>:: Specifies the Fully Qualified Domain Name (FQDN) used in the HELO/EHLO command to the SMTP server. Some servers require the FQDN to match your IP address. If not set, git send-email attempts to determine your FQDN automatically. Default is the value of - 'sendemail.smtpDomain'. + `sendemail.smtpDomain`. + +--smtp-auth=<mechanisms>:: + Whitespace-separated list of allowed SMTP-AUTH mechanisms. This setting + forces using only the listed mechanisms. Example: ++ +------ +$ git send-email --smtp-auth="PLAIN LOGIN GSSAPI" ... +------ ++ +If at least one of the specified mechanisms matches the ones advertised by the +SMTP server and if it is supported by the utilized SASL library, the mechanism +is used for authentication. If neither 'sendemail.smtpAuth' nor `--smtp-auth` +is specified, all mechanisms supported by the SASL library can be used. --smtp-pass[=<password>]:: Password for SMTP-AUTH. The argument is optional: If no argument is specified, then the empty string is used as - the password. Default is the value of 'sendemail.smtpPass', - however '--smtp-pass' always overrides this value. + the password. Default is the value of `sendemail.smtpPass`, + however `--smtp-pass` always overrides this value. + Furthermore, passwords need not be specified in configuration files or on the command line. If a username has been specified (with -'--smtp-user' or a 'sendemail.smtpUser'), but no password has been -specified (with '--smtp-pass' or 'sendemail.smtpPass'), then +`--smtp-user` or a `sendemail.smtpUser`), but no password has been +specified (with `--smtp-pass` or `sendemail.smtpPass`), then a password is obtained using 'git-credential'. --smtp-server=<host>:: @@ -188,7 +202,7 @@ a password is obtained using 'git-credential'. `smtp.example.com` or a raw IP address). Alternatively it can specify a full pathname of a sendmail-like program instead; the program must support the `-i` option. Default value can - be specified by the 'sendemail.smtpServer' configuration + be specified by the `sendemail.smtpServer` configuration option; the built-in default is `/usr/sbin/sendmail` or `/usr/lib/sendmail` if such program is available, or `localhost` otherwise. @@ -199,11 +213,11 @@ a password is obtained using 'git-credential'. submission port 587, or the common SSL smtp port 465); symbolic port names (e.g. "submission" instead of 587) are also accepted. The port can also be set with the - 'sendemail.smtpServerPort' configuration variable. + `sendemail.smtpServerPort` configuration variable. --smtp-server-option=<option>:: If set, specifies the outgoing SMTP server option to use. - Default value can be specified by the 'sendemail.smtpServerOption' + Default value can be specified by the `sendemail.smtpServerOption` configuration option. + The --smtp-server-option option must be repeated for each option you want @@ -220,13 +234,13 @@ must be used for each option. certificates concatenated together: see verify(1) -CAfile and -CApath for more information on these). Set it to an empty string to disable certificate verification. Defaults to the value of the - 'sendemail.smtpsslcertpath' configuration variable, if set, or the + `sendemail.smtpsslcertpath` configuration variable, if set, or the backing SSL library's compiled-in default otherwise (which should be the best choice on most platforms). --smtp-user=<user>:: - Username for SMTP-AUTH. Default is the value of 'sendemail.smtpUser'; - if a username is not specified (with '--smtp-user' or 'sendemail.smtpUser'), + Username for SMTP-AUTH. Default is the value of `sendemail.smtpUser`; + if a username is not specified (with `--smtp-user` or `sendemail.smtpUser`), then authentication is not attempted. --smtp-debug=0|1:: @@ -247,25 +261,25 @@ Automating Specify a command to execute once per patch file which should generate patch file specific "Cc:" entries. Output of this command must be single email address per line. - Default is the value of 'sendemail.ccCmd' configuration value. + Default is the value of `sendemail.ccCmd` configuration value. --[no-]chain-reply-to:: If this is set, each email will be sent as a reply to the previous email sent. If disabled with "--no-chain-reply-to", all emails after the first will be sent as replies to the first email sent. When using this, it is recommended that the first file given be an overview of the - entire patch series. Disabled by default, but the 'sendemail.chainReplyTo' + entire patch series. Disabled by default, but the `sendemail.chainReplyTo` configuration variable can be used to enable it. --identity=<identity>:: A configuration identity. When given, causes values in the 'sendemail.<identity>' subsection to take precedence over values in the 'sendemail' section. The default identity is - the value of 'sendemail.identity'. + the value of `sendemail.identity`. --[no-]signed-off-by-cc:: If this is set, add emails found in Signed-off-by: or Cc: lines to the - cc list. Default is the value of 'sendemail.signedoffbycc' configuration + cc list. Default is the value of `sendemail.signedoffbycc` configuration value; if that is unspecified, default to --signed-off-by-cc. --[no-]cc-cover:: @@ -298,13 +312,13 @@ Automating - 'all' will suppress all auto cc values. -- + -Default is the value of 'sendemail.suppresscc' configuration value; if +Default is the value of `sendemail.suppresscc` configuration value; if that is unspecified, default to 'self' if --suppress-from is specified, as well as 'body' if --no-signed-off-cc is specified. --[no-]suppress-from:: If this is set, do not add the From: address to the cc: list. - Default is the value of 'sendemail.suppressFrom' configuration + Default is the value of `sendemail.suppressFrom` configuration value; if that is unspecified, default to --no-suppress-from. --[no-]thread:: @@ -316,7 +330,7 @@ specified, as well as 'body' if --no-signed-off-cc is specified. + If disabled with "--no-thread", those headers will not be added (unless specified with --in-reply-to). Default is the value of the -'sendemail.thread' configuration value; if that is unspecified, +`sendemail.thread` configuration value; if that is unspecified, default to --thread. + It is up to the user to ensure that no In-Reply-To header already @@ -341,7 +355,7 @@ Administering - 'auto' is equivalent to 'cc' + 'compose' -- + -Default is the value of 'sendemail.confirm' configuration value; if that +Default is the value of `sendemail.confirm` configuration value; if that is unspecified, default to 'auto' unless any of the suppress options have been specified, in which case default to 'compose'. @@ -350,8 +364,8 @@ have been specified, in which case default to 'compose'. --[no-]format-patch:: When an argument may be understood either as a reference or as a file name, - choose to understand it as a format-patch argument ('--format-patch') - or as a file name ('--no-format-patch'). By default, when such a conflict + choose to understand it as a format-patch argument (`--format-patch`) + or as a file name (`--no-format-patch`). By default, when such a conflict occurs, git send-email will fail. --quiet:: @@ -367,19 +381,29 @@ have been specified, in which case default to 'compose'. is due to SMTP limits as described by http://www.ietf.org/rfc/rfc2821.txt. -- + -Default is the value of 'sendemail.validate'; if this is not set, -default to '--validate'. +Default is the value of `sendemail.validate`; if this is not set, +default to `--validate`. --force:: Send emails even if safety checks would prevent it. +Information +~~~~~~~~~~~ + +--dump-aliases:: + Instead of the normal operation, dump the shorthand alias names from + the configured alias file(s), one per line in alphabetical order. Note, + this only includes the alias name and not its expanded email addresses. + See 'sendemail.aliasesfile' for more information about aliases. + + CONFIGURATION ------------- sendemail.aliasesFile:: To avoid typing long email addresses, point this to one or more - email aliases files. You must also supply 'sendemail.aliasFileType'. + email aliases files. You must also supply `sendemail.aliasFileType`. sendemail.aliasFileType:: Format of the file(s) specified in sendemail.aliasesFile. Must be @@ -404,13 +428,13 @@ sendmail;; sendemail.multiEdit:: If true (default), a single editor instance will be spawned to edit - files you have to edit (patches when '--annotate' is used, and the - summary when '--compose' is used). If false, files will be edited one + files you have to edit (patches when `--annotate` is used, and the + summary when `--compose` is used). If false, files will be edited one after the other, spawning a new editor each time. sendemail.confirm:: Sets the default for whether to confirm before sending. Must be - one of 'always', 'never', 'cc', 'compose', or 'auto'. See '--confirm' + one of 'always', 'never', 'cc', 'compose', or 'auto'. See `--confirm` in the previous section for the meaning of these values. EXAMPLE @@ -426,6 +450,19 @@ edit ~/.gitconfig to specify your account settings: smtpUser = yourname@gmail.com smtpServerPort = 587 +If you have multifactor authentication setup on your gmail account, you will +need to generate an app-specific password for use with 'git send-email'. Visit +https://security.google.com/settings/security/apppasswords to setup an +app-specific password. Once setup, you can store it with the credentials +helper: + + $ git credential fill + protocol=smtp + host=smtp.gmail.com + username=youname@gmail.com + password=app-password + + Once your commits are ready to be sent to the mailing list, run the following commands: |