diff options
Diffstat (limited to 'Documentation/git-send-email.txt')
| -rw-r--r-- | Documentation/git-send-email.txt | 153 |
1 files changed, 103 insertions, 50 deletions
diff --git a/Documentation/git-send-email.txt b/Documentation/git-send-email.txt index 66bf3b2fcd..d6b192b7b9 100644 --- a/Documentation/git-send-email.txt +++ b/Documentation/git-send-email.txt @@ -14,6 +14,10 @@ SYNOPSIS DESCRIPTION ----------- Takes the patches given on the command line and emails them out. +Patches can be specified as files, directories (which will send all +files in the directory), or directly as a revision list. In the +last case, any format accepted by linkgit:git-format-patch[1] can +be passed to git send-email. The header of the email is configurable by command line options. If not specified on the command line, the user will be prompted with a ReadLine @@ -39,54 +43,57 @@ OPTIONS Composing ~~~~~~~~~ ---bcc:: +--annotate:: + Review and edit each patch you're about to send. See the + CONFIGURATION section for 'sendemail.multiedit'. + +--bcc=<address>:: Specify a "Bcc:" value for each email. Default is the value of 'sendemail.bcc'. + The --bcc option must be repeated for each user you want on the bcc list. ---cc:: +--cc=<address>:: Specify a starting "Cc:" value for each email. Default is the value of 'sendemail.cc'. + The --cc option must be repeated for each user you want on the cc list. ---annotate:: - Review each patch you're about to send in an editor. The setting - 'sendemail.multiedit' defines if this will spawn one editor per patch - or one for all of them at once. - --compose:: Use $GIT_EDITOR, core.editor, $VISUAL, or $EDITOR to edit an introductory message for the patch series. + -When '--compose' is used, git send-email gets less interactive will use the -values of the headers you set there. If the body of the email (what you type -after the headers and a blank line) only contains blank (or GIT: prefixed) -lines, the summary won't be sent, but git-send-email will still use the -Headers values if you don't removed them. +When '--compose' is used, git send-email will use the From, Subject, and +In-Reply-To headers specified in the message. If the body of the message +(what you type after the headers and a blank line) only contains blank +(or GIT: prefixed) lines the summary won't be sent, but From, Subject, +and In-Reply-To headers will be used unless they are removed. + -If it wasn't able to see a header in the summary it will ask you about it -interactively after quitting your editor. +Missing From or In-Reply-To headers will be prompted for. ++ +See the CONFIGURATION section for 'sendemail.multiedit'. ---from:: - Specify the sender of the emails. This will default to - the value GIT_COMMITTER_IDENT, as returned by "git var -l". - The user will still be prompted to confirm this entry. +--from=<address>:: + Specify the sender of the emails. If not specified on the command line, + the value of the 'sendemail.from' configuration option is used. If + neither the command line option nor 'sendemail.from' are set, then the + user will be prompted for the value. The default for the prompt will be + the value of GIT_AUTHOR_IDENT, or GIT_COMMITTER_IDENT if that is not + set, as returned by "git var -l". ---in-reply-to:: +--in-reply-to=<identifier>:: Specify the contents of the first In-Reply-To header. Subsequent emails will refer to the previous email instead of this if --chain-reply-to is set (the default) Only necessary if --compose is also set. If --compose is not set, this will be prompted for. ---subject:: +--subject=<string>:: Specify the initial subject of the email thread. Only necessary if --compose is also set. If --compose is not set, this will be prompted for. ---to:: +--to=<address>:: Specify the primary recipient of the emails generated. Generally, this will be the upstream maintainer of the project involved. Default is the value of the 'sendemail.to' configuration value; if that is unspecified, @@ -98,7 +105,7 @@ The --to option must be repeated for each user you want on the to list. Sending ~~~~~~~ ---envelope-sender:: +--envelope-sender=<address>:: Specify the envelope sender used to send the emails. This is useful if your default address is not the address that is subscribed to a list. If you use the sendmail binary, you must have @@ -106,12 +113,12 @@ Sending the 'sendemail.envelopesender' configuration variable; if that is unspecified, choosing the envelope sender is left to your MTA. ---smtp-encryption:: +--smtp-encryption=<encryption>:: Specify the encryption to use, either 'ssl' or 'tls'. Any other value reverts to plain SMTP. Default is the value of 'sendemail.smtpencryption'. ---smtp-pass:: +--smtp-pass[=<password>]:: Password for SMTP-AUTH. The argument is optional: If no argument is specified, then the empty string is used as the password. Default is the value of 'sendemail.smtppass', @@ -123,7 +130,7 @@ or on the command line. If a username has been specified (with specified (with '--smtp-pass' or 'sendemail.smtppass'), then the user is prompted for a password while the input is masked for privacy. ---smtp-server:: +--smtp-server=<host>:: If set, specifies the outgoing SMTP server to use (e.g. `smtp.example.com` or a raw IP address). Alternatively it can specify a full pathname of a sendmail-like program instead; @@ -133,15 +140,17 @@ user is prompted for a password while the input is masked for privacy. `/usr/lib/sendmail` if such program is available, or `localhost` otherwise. ---smtp-server-port:: +--smtp-server-port=<port>:: Specifies a port different from the default port (SMTP servers typically listen to smtp port 25 and ssmtp port - 465). This can be set with 'sendemail.smtpserverport'. + 465); symbolic port names (e.g. "submission" instead of 465) + are also accepted. The port can also be set with the + 'sendemail.smtpserverport' configuration variable. --smtp-ssl:: Legacy alias for '--smtp-encryption ssl'. ---smtp-user:: +--smtp-user=<user>:: Username for SMTP-AUTH. Default is the value of 'sendemail.smtpuser'; if a username is not specified (with '--smtp-user' or 'sendemail.smtpuser'), then authentication is not attempted. @@ -150,7 +159,7 @@ user is prompted for a password while the input is masked for privacy. Automating ~~~~~~~~~~ ---cc-cmd:: +--cc-cmd=<command>:: Specify a command to execute once per patch file which should generate patch file specific "Cc:" entries. Output of this command must be single email address per line. @@ -164,7 +173,7 @@ Automating entire patch series. Default is the value of the 'sendemail.chainreplyto' configuration value; if that is unspecified, default to --chain-reply-to. ---identity:: +--identity=<identity>:: A configuration identity. When given, causes values in the 'sendemail.<identity>' subsection to take precedence over values in the 'sendemail' section. The default identity is @@ -175,16 +184,27 @@ Automating cc list. Default is the value of 'sendemail.signedoffbycc' configuration value; if that is unspecified, default to --signed-off-by-cc. ---suppress-cc:: +--suppress-cc=<category>:: Specify an additional category of recipients to suppress the - auto-cc of. 'self' will avoid including the sender, 'author' will - avoid including the patch author, 'cc' will avoid including anyone - mentioned in Cc lines in the patch, 'sob' will avoid including - anyone mentioned in Signed-off-by lines, and 'cccmd' will avoid - running the --cc-cmd. 'all' will suppress all auto cc values. - Default is the value of 'sendemail.suppresscc' configuration value; - if that is unspecified, default to 'self' if --suppress-from is - specified, as well as 'sob' if --no-signed-off-cc is specified. + auto-cc of: ++ +-- +- 'author' will avoid including the patch author +- 'self' will avoid including the sender +- 'cc' will avoid including anyone mentioned in Cc lines in the patch header + except for self (use 'self' for that). +- 'bodycc' will avoid including anyone mentioned in Cc lines in the + patch body (commit message) except for self (use 'self' for that). +- 'sob' will avoid including anyone mentioned in Signed-off-by lines except + for self (use 'self' for that). +- 'cccmd' will avoid running the --cc-cmd. +- 'body' is equivalent to 'sob' + 'bodycc' +- 'all' will suppress all auto cc values. +-- ++ +Default is the value of 'sendemail.suppresscc' configuration value; if +that is unspecified, default to 'self' if --suppress-from is +specified, as well as 'body' if --no-signed-off-cc is specified. --[no-]suppress-from:: If this is set, do not add the From: address to the cc: list. @@ -192,18 +212,52 @@ Automating value; if that is unspecified, default to --no-suppress-from. --[no-]thread:: - If this is set, the In-Reply-To header will be set on each email sent. - If disabled with "--no-thread", no emails will have the In-Reply-To - header set. Default is the value of the 'sendemail.thread' configuration - value; if that is unspecified, default to --thread. + If this is set, the In-Reply-To and References headers will be + added to each email sent. Whether each mail refers to the + previous email (`deep` threading per 'git format-patch' + wording) or to the first email (`shallow` threading) is + governed by "--[no-]chain-reply-to". ++ +If disabled with "--no-thread", those headers will not be added +(unless specified with --in-reply-to). Default is the value of the +'sendemail.thread' configuration value; if that is unspecified, +default to --thread. ++ +It is up to the user to ensure that no In-Reply-To header already +exists when 'git send-email' is asked to add it (especially note that +'git format-patch' can be configured to do the threading itself). +Failure to do so may not produce the expected result in the +recipient's MUA. Administering ~~~~~~~~~~~~~ +--confirm=<mode>:: + Confirm just before sending: ++ +-- +- 'always' will always confirm before sending +- 'never' will never confirm before sending +- 'cc' will confirm before sending when send-email has automatically + added addresses from the patch to the Cc list +- 'compose' will confirm before sending the first message when using --compose. +- 'auto' is equivalent to 'cc' + 'compose' +-- ++ +Default is the value of 'sendemail.confirm' configuration value; if that +is unspecified, default to 'auto' unless any of the suppress options +have been specified, in which case default to 'compose'. + --dry-run:: Do everything except actually send the emails. +--[no-]format-patch:: + When an argument may be understood either as a reference or as a file name, + choose to understand it as a format-patch argument ('--format-patch') + or as a file name ('--no-format-patch'). By default, when such a conflict + occurs, git send-email will fail. + --quiet:: Make git-send-email less verbose. One line per email should be all that is output. @@ -220,12 +274,6 @@ Administering Default is the value of 'sendemail.validate'; if this is not set, default to '--validate'. ---[no-]format-patch:: - When an argument may be understood either as a reference or as a file name, - choose to understand it as a format-patch argument ('--format-patch') - or as a file name ('--no-format-patch'). By default, when such a conflict - occurs, git send-email will fail. - CONFIGURATION ------------- @@ -236,7 +284,7 @@ sendemail.aliasesfile:: sendemail.aliasfiletype:: Format of the file(s) specified in sendemail.aliasesfile. Must be - one of 'mutt', 'mailrc', 'pine', or 'gnus'. + one of 'mutt', 'mailrc', 'pine', 'elm', or 'gnus'. sendemail.multiedit:: If true (default), a single editor instance will be spawned to edit @@ -244,6 +292,11 @@ sendemail.multiedit:: summary when '--compose' is used). If false, files will be edited one after the other, spawning a new editor each time. +sendemail.confirm:: + Sets the default for whether to confirm before sending. Must be + one of 'always', 'never', 'cc', 'compose', or 'auto'. See '--confirm' + in the previous section for the meaning of these values. + Author ------ |