diff options
Diffstat (limited to 'Documentation/git-reset.txt')
| -rw-r--r-- | Documentation/git-reset.txt | 403 |
1 files changed, 403 insertions, 0 deletions
diff --git a/Documentation/git-reset.txt b/Documentation/git-reset.txt new file mode 100644 index 0000000000..f445cb38fa --- /dev/null +++ b/Documentation/git-reset.txt @@ -0,0 +1,403 @@ +git-reset(1) +============ + +NAME +---- +git-reset - Reset current HEAD to the specified state + +SYNOPSIS +-------- +[verse] +'git reset' [-q] [<tree-ish>] [--] <paths>... +'git reset' (--patch | -p) [<tree-ish>] [--] [<paths>...] +'git reset' [--soft | --mixed | --hard | --merge | --keep] [-q] [<commit>] + +DESCRIPTION +----------- +In the first and second form, copy entries from <tree-ish> to the index. +In the third form, set the current branch head (HEAD) to <commit>, optionally +modifying index and working tree to match. The <tree-ish>/<commit> defaults +to HEAD in all forms. + +'git reset' [-q] [<tree-ish>] [--] <paths>...:: + This form resets the index entries for all <paths> to their + state at <tree-ish>. (It does not affect the working tree, nor + the current branch.) ++ +This means that `git reset <paths>` is the opposite of `git add +<paths>`. ++ +After running `git reset <paths>` to update the index entry, you can +use linkgit:git-checkout[1] to check the contents out of the index to +the working tree. +Alternatively, using linkgit:git-checkout[1] and specifying a commit, you +can copy the contents of a path out of a commit to the index and to the +working tree in one go. + +'git reset' (--patch | -p) [<tree-ish>] [--] [<paths>...]:: + Interactively select hunks in the difference between the index + and <tree-ish> (defaults to HEAD). The chosen hunks are applied + in reverse to the index. ++ +This means that `git reset -p` is the opposite of `git add -p`, i.e. +you can use it to selectively reset hunks. See the ``Interactive Mode'' +section of linkgit:git-add[1] to learn how to operate the `--patch` mode. + +'git reset' [<mode>] [<commit>]:: + This form resets the current branch head to <commit> and + possibly updates the index (resetting it to the tree of <commit>) and + the working tree depending on <mode>. If <mode> is omitted, + defaults to "--mixed". The <mode> must be one of the following: ++ +-- +--soft:: + Does not touch the index file nor the working tree at all (but + resets the head to <commit>, just like all modes do). This leaves + all your changed files "Changes to be committed", as 'git status' + would put it. + +--mixed:: + Resets the index but not the working tree (i.e., the changed files + are preserved but not marked for commit) and reports what has not + been updated. This is the default action. + +--hard:: + Resets the index and working tree. Any changes to tracked files in the + working tree since <commit> are discarded. + +--merge:: + Resets the index and updates the files in the working tree that are + different between <commit> and HEAD, but keeps those which are + different between the index and working tree (i.e. which have changes + which have not been added). + If a file that is different between <commit> and the index has unstaged + changes, reset is aborted. ++ +In other words, --merge does something like a 'git read-tree -u -m <commit>', +but carries forward unmerged index entries. + +--keep:: + Resets index entries and updates files in the working tree that are + different between <commit> and HEAD. + If a file that is different between <commit> and HEAD has local changes, + reset is aborted. +-- + +If you want to undo a commit other than the latest on a branch, +linkgit:git-revert[1] is your friend. + + +OPTIONS +------- + +-q:: +--quiet:: + Be quiet, only report errors. + + +EXAMPLES +-------- + +Undo add:: ++ +------------ +$ edit <1> +$ git add frotz.c filfre.c +$ mailx <2> +$ git reset <3> +$ git pull git://info.example.com/ nitfol <4> +------------ ++ +<1> You are happily working on something, and find the changes +in these files are in good order. You do not want to see them +when you run "git diff", because you plan to work on other files +and changes with these files are distracting. +<2> Somebody asks you to pull, and the changes sounds worthy of merging. +<3> However, you already dirtied the index (i.e. your index does +not match the HEAD commit). But you know the pull you are going +to make does not affect frotz.c nor filfre.c, so you revert the +index changes for these two files. Your changes in working tree +remain there. +<4> Then you can pull and merge, leaving frotz.c and filfre.c +changes still in the working tree. + +Undo a commit and redo:: ++ +------------ +$ git commit ... +$ git reset --soft HEAD^ <1> +$ edit <2> +$ git commit -a -c ORIG_HEAD <3> +------------ ++ +<1> This is most often done when you remembered what you +just committed is incomplete, or you misspelled your commit +message, or both. Leaves working tree as it was before "reset". +<2> Make corrections to working tree files. +<3> "reset" copies the old head to .git/ORIG_HEAD; redo the +commit by starting with its log message. If you do not need to +edit the message further, you can give -C option instead. ++ +See also the --amend option to linkgit:git-commit[1]. + +Undo a commit, making it a topic branch:: ++ +------------ +$ git branch topic/wip <1> +$ git reset --hard HEAD~3 <2> +$ git checkout topic/wip <3> +------------ ++ +<1> You have made some commits, but realize they were premature +to be in the "master" branch. You want to continue polishing +them in a topic branch, so create "topic/wip" branch off of the +current HEAD. +<2> Rewind the master branch to get rid of those three commits. +<3> Switch to "topic/wip" branch and keep working. + +Undo commits permanently:: ++ +------------ +$ git commit ... +$ git reset --hard HEAD~3 <1> +------------ ++ +<1> The last three commits (HEAD, HEAD^, and HEAD~2) were bad +and you do not want to ever see them again. Do *not* do this if +you have already given these commits to somebody else. (See the +"RECOVERING FROM UPSTREAM REBASE" section in linkgit:git-rebase[1] for +the implications of doing so.) + +Undo a merge or pull:: ++ +------------ +$ git pull <1> +Auto-merging nitfol +CONFLICT (content): Merge conflict in nitfol +Automatic merge failed; fix conflicts and then commit the result. +$ git reset --hard <2> +$ git pull . topic/branch <3> +Updating from 41223... to 13134... +Fast-forward +$ git reset --hard ORIG_HEAD <4> +------------ ++ +<1> Try to update from the upstream resulted in a lot of +conflicts; you were not ready to spend a lot of time merging +right now, so you decide to do that later. +<2> "pull" has not made merge commit, so "git reset --hard" +which is a synonym for "git reset --hard HEAD" clears the mess +from the index file and the working tree. +<3> Merge a topic branch into the current branch, which resulted +in a fast-forward. +<4> But you decided that the topic branch is not ready for public +consumption yet. "pull" or "merge" always leaves the original +tip of the current branch in ORIG_HEAD, so resetting hard to it +brings your index file and the working tree back to that state, +and resets the tip of the branch to that commit. + +Undo a merge or pull inside a dirty working tree:: ++ +------------ +$ git pull <1> +Auto-merging nitfol +Merge made by recursive. + nitfol | 20 +++++---- + ... +$ git reset --merge ORIG_HEAD <2> +------------ ++ +<1> Even if you may have local modifications in your +working tree, you can safely say "git pull" when you know +that the change in the other branch does not overlap with +them. +<2> After inspecting the result of the merge, you may find +that the change in the other branch is unsatisfactory. Running +"git reset --hard ORIG_HEAD" will let you go back to where you +were, but it will discard your local changes, which you do not +want. "git reset --merge" keeps your local changes. + + +Interrupted workflow:: ++ +Suppose you are interrupted by an urgent fix request while you +are in the middle of a large change. The files in your +working tree are not in any shape to be committed yet, but you +need to get to the other branch for a quick bugfix. ++ +------------ +$ git checkout feature ;# you were working in "feature" branch and +$ work work work ;# got interrupted +$ git commit -a -m "snapshot WIP" <1> +$ git checkout master +$ fix fix fix +$ git commit ;# commit with real log +$ git checkout feature +$ git reset --soft HEAD^ ;# go back to WIP state <2> +$ git reset <3> +------------ ++ +<1> This commit will get blown away so a throw-away log message is OK. +<2> This removes the 'WIP' commit from the commit history, and sets + your working tree to the state just before you made that snapshot. +<3> At this point the index file still has all the WIP changes you + committed as 'snapshot WIP'. This updates the index to show your + WIP files as uncommitted. ++ +See also linkgit:git-stash[1]. + +Reset a single file in the index:: ++ +Suppose you have added a file to your index, but later decide you do not +want to add it to your commit. You can remove the file from the index +while keeping your changes with git reset. ++ +------------ +$ git reset -- frotz.c <1> +$ git commit -m "Commit files in index" <2> +$ git add frotz.c <3> +------------ ++ +<1> This removes the file from the index while keeping it in the working + directory. +<2> This commits all other changes in the index. +<3> Adds the file to the index again. + +Keep changes in working tree while discarding some previous commits:: ++ +Suppose you are working on something and you commit it, and then you +continue working a bit more, but now you think that what you have in +your working tree should be in another branch that has nothing to do +with what you committed previously. You can start a new branch and +reset it while keeping the changes in your working tree. ++ +------------ +$ git tag start +$ git checkout -b branch1 +$ edit +$ git commit ... <1> +$ edit +$ git checkout -b branch2 <2> +$ git reset --keep start <3> +------------ ++ +<1> This commits your first edits in branch1. +<2> In the ideal world, you could have realized that the earlier + commit did not belong to the new topic when you created and switched + to branch2 (i.e. "git checkout -b branch2 start"), but nobody is + perfect. +<3> But you can use "reset --keep" to remove the unwanted commit after + you switched to "branch2". + + +DISCUSSION +---------- + +The tables below show what happens when running: + +---------- +git reset --option target +---------- + +to reset the HEAD to another commit (`target`) with the different +reset options depending on the state of the files. + +In these tables, A, B, C and D are some different states of a +file. For example, the first line of the first table means that if a +file is in state A in the working tree, in state B in the index, in +state C in HEAD and in state D in the target, then "git reset --soft +target" will leave the file in the working tree in state A and in the +index in state B. It resets (i.e. moves) the HEAD (i.e. the tip of +the current branch, if you are on one) to "target" (which has the file +in state D). + + working index HEAD target working index HEAD + ---------------------------------------------------- + A B C D --soft A B D + --mixed A D D + --hard D D D + --merge (disallowed) + --keep (disallowed) + + working index HEAD target working index HEAD + ---------------------------------------------------- + A B C C --soft A B C + --mixed A C C + --hard C C C + --merge (disallowed) + --keep A C C + + working index HEAD target working index HEAD + ---------------------------------------------------- + B B C D --soft B B D + --mixed B D D + --hard D D D + --merge D D D + --keep (disallowed) + + working index HEAD target working index HEAD + ---------------------------------------------------- + B B C C --soft B B C + --mixed B C C + --hard C C C + --merge C C C + --keep B C C + + working index HEAD target working index HEAD + ---------------------------------------------------- + B C C D --soft B C D + --mixed B D D + --hard D D D + --merge (disallowed) + --keep (disallowed) + + working index HEAD target working index HEAD + ---------------------------------------------------- + B C C C --soft B C C + --mixed B C C + --hard C C C + --merge B C C + --keep B C C + +"reset --merge" is meant to be used when resetting out of a conflicted +merge. Any mergy operation guarantees that the working tree file that is +involved in the merge does not have local change wrt the index before +it starts, and that it writes the result out to the working tree. So if +we see some difference between the index and the target and also +between the index and the working tree, then it means that we are not +resetting out from a state that a mergy operation left after failing +with a conflict. That is why we disallow --merge option in this case. + +"reset --keep" is meant to be used when removing some of the last +commits in the current branch while keeping changes in the working +tree. If there could be conflicts between the changes in the commit we +want to remove and the changes in the working tree we want to keep, +the reset is disallowed. That's why it is disallowed if there are both +changes between the working tree and HEAD, and between HEAD and the +target. To be safe, it is also disallowed when there are unmerged +entries. + +The following tables show what happens when there are unmerged +entries: + + working index HEAD target working index HEAD + ---------------------------------------------------- + X U A B --soft (disallowed) + --mixed X B B + --hard B B B + --merge B B B + --keep (disallowed) + + working index HEAD target working index HEAD + ---------------------------------------------------- + X U A A --soft (disallowed) + --mixed X A A + --hard A A A + --merge A A A + --keep (disallowed) + +X means any state and U means an unmerged index. + +GIT +--- +Part of the linkgit:git[1] suite |