diff options
Diffstat (limited to 'Documentation/git-receive-pack.txt')
| -rw-r--r-- | Documentation/git-receive-pack.txt | 223 |
1 files changed, 223 insertions, 0 deletions
diff --git a/Documentation/git-receive-pack.txt b/Documentation/git-receive-pack.txt new file mode 100644 index 0000000000..0ccd5fbc78 --- /dev/null +++ b/Documentation/git-receive-pack.txt @@ -0,0 +1,223 @@ +git-receive-pack(1) +=================== + +NAME +---- +git-receive-pack - Receive what is pushed into the repository + + +SYNOPSIS +-------- +[verse] +'git-receive-pack' <directory> + +DESCRIPTION +----------- +Invoked by 'git send-pack' and updates the repository with the +information fed from the remote end. + +This command is usually not invoked directly by the end user. +The UI for the protocol is on the 'git send-pack' side, and the +program pair is meant to be used to push updates to remote +repository. For pull operations, see linkgit:git-fetch-pack[1]. + +The command allows for creation and fast-forwarding of sha1 refs +(heads/tags) on the remote end (strictly speaking, it is the +local end 'git-receive-pack' runs, but to the user who is sitting at +the send-pack end, it is updating the remote. Confused?) + +There are other real-world examples of using update and +post-update hooks found in the Documentation/howto directory. + +'git-receive-pack' honours the receive.denyNonFastForwards config +option, which tells it if updates to a ref should be denied if they +are not fast-forwards. + +A number of other receive.* config options are available to tweak +its behavior, see linkgit:git-config[1]. + +OPTIONS +------- +<directory>:: + The repository to sync into. + +pre-receive Hook +---------------- +Before any ref is updated, if $GIT_DIR/hooks/pre-receive file exists +and is executable, it will be invoked once with no parameters. The +standard input of the hook will be one line per ref to be updated: + + sha1-old SP sha1-new SP refname LF + +The refname value is relative to $GIT_DIR; e.g. for the master +head this is "refs/heads/master". The two sha1 values before +each refname are the object names for the refname before and after +the update. Refs to be created will have sha1-old equal to 0\{40}, +while refs to be deleted will have sha1-new equal to 0\{40}, otherwise +sha1-old and sha1-new should be valid objects in the repository. + +When accepting a signed push (see linkgit:git-push[1]), the signed +push certificate is stored in a blob and an environment variable +`GIT_PUSH_CERT` can be consulted for its object name. See the +description of `post-receive` hook for an example. In addition, the +certificate is verified using GPG and the result is exported with +the following environment variables: + +`GIT_PUSH_CERT_SIGNER`:: + The name and the e-mail address of the owner of the key that + signed the push certificate. + +`GIT_PUSH_CERT_KEY`:: + The GPG key ID of the key that signed the push certificate. + +`GIT_PUSH_CERT_STATUS`:: + The status of GPG verification of the push certificate, + using the same mnemonic as used in `%G?` format of `git log` + family of commands (see linkgit:git-log[1]). + +`GIT_PUSH_CERT_NONCE`:: + The nonce string the process asked the signer to include + in the push certificate. If this does not match the value + recorded on the "nonce" header in the push certificate, it + may indicate that the certificate is a valid one that is + being replayed from a separate "git push" session. + +`GIT_PUSH_CERT_NONCE_STATUS`:: +`UNSOLICITED`;; + "git push --signed" sent a nonce when we did not ask it to + send one. +`MISSING`;; + "git push --signed" did not send any nonce header. +`BAD`;; + "git push --signed" sent a bogus nonce. +`OK`;; + "git push --signed" sent the nonce we asked it to send. +`SLOP`;; + "git push --signed" sent a nonce different from what we + asked it to send now, but in a previous session. See + `GIT_PUSH_CERT_NONCE_SLOP` environment variable. + +`GIT_PUSH_CERT_NONCE_SLOP`:: + "git push --signed" sent a nonce different from what we + asked it to send now, but in a different session whose + starting time is different by this many seconds from the + current session. Only meaningful when + `GIT_PUSH_CERT_NONCE_STATUS` says `SLOP`. + Also read about `receive.certNonceSlop` variable in + linkgit:git-config[1]. + +This hook is called before any refname is updated and before any +fast-forward checks are performed. + +If the pre-receive hook exits with a non-zero exit status no updates +will be performed, and the update, post-receive and post-update +hooks will not be invoked either. This can be useful to quickly +bail out if the update is not to be supported. + +update Hook +----------- +Before each ref is updated, if $GIT_DIR/hooks/update file exists +and is executable, it is invoked once per ref, with three parameters: + + $GIT_DIR/hooks/update refname sha1-old sha1-new + +The refname parameter is relative to $GIT_DIR; e.g. for the master +head this is "refs/heads/master". The two sha1 arguments are +the object names for the refname before and after the update. +Note that the hook is called before the refname is updated, +so either sha1-old is 0\{40} (meaning there is no such ref yet), +or it should match what is recorded in refname. + +The hook should exit with non-zero status if it wants to disallow +updating the named ref. Otherwise it should exit with zero. + +Successful execution (a zero exit status) of this hook does not +ensure the ref will actually be updated, it is only a prerequisite. +As such it is not a good idea to send notices (e.g. email) from +this hook. Consider using the post-receive hook instead. + +post-receive Hook +----------------- +After all refs were updated (or attempted to be updated), if any +ref update was successful, and if $GIT_DIR/hooks/post-receive +file exists and is executable, it will be invoked once with no +parameters. The standard input of the hook will be one line +for each successfully updated ref: + + sha1-old SP sha1-new SP refname LF + +The refname value is relative to $GIT_DIR; e.g. for the master +head this is "refs/heads/master". The two sha1 values before +each refname are the object names for the refname before and after +the update. Refs that were created will have sha1-old equal to +0\{40}, while refs that were deleted will have sha1-new equal to +0\{40}, otherwise sha1-old and sha1-new should be valid objects in +the repository. + +The `GIT_PUSH_CERT*` environment variables can be inspected, just as +in `pre-receive` hook, after accepting a signed push. + +Using this hook, it is easy to generate mails describing the updates +to the repository. This example script sends one mail message per +ref listing the commits pushed to the repository, and logs the push +certificates of signed pushes with good signatures to a logger +service: + + #!/bin/sh + # mail out commit update information. + while read oval nval ref + do + if expr "$oval" : '0*$' >/dev/null + then + echo "Created a new ref, with the following commits:" + git rev-list --pretty "$nval" + else + echo "New commits:" + git rev-list --pretty "$nval" "^$oval" + fi | + mail -s "Changes to ref $ref" commit-list@mydomain + done + # log signed push certificate, if any + if test -n "${GIT_PUSH_CERT-}" && test ${GIT_PUSH_CERT_STATUS} = G + then + ( + echo expected nonce is ${GIT_PUSH_NONCE} + git cat-file blob ${GIT_PUSH_CERT} + ) | mail -s "push certificate from $GIT_PUSH_CERT_SIGNER" push-log@mydomain + fi + exit 0 + +The exit code from this hook invocation is ignored, however a +non-zero exit code will generate an error message. + +Note that it is possible for refname to not have sha1-new when this +hook runs. This can easily occur if another user modifies the ref +after it was updated by 'git-receive-pack', but before the hook was able +to evaluate it. It is recommended that hooks rely on sha1-new +rather than the current value of refname. + +post-update Hook +---------------- +After all other processing, if at least one ref was updated, and +if $GIT_DIR/hooks/post-update file exists and is executable, then +post-update will be called with the list of refs that have been updated. +This can be used to implement any repository wide cleanup tasks. + +The exit code from this hook invocation is ignored; the only thing +left for 'git-receive-pack' to do at that point is to exit itself +anyway. + +This hook can be used, for example, to run `git update-server-info` +if the repository is packed and is served via a dumb transport. + + #!/bin/sh + exec git update-server-info + + +SEE ALSO +-------- +linkgit:git-send-pack[1], linkgit:gitnamespaces[7] + +GIT +--- +Part of the linkgit:git[1] suite |