diff options
Diffstat (limited to 'Documentation/git-rebase.txt')
| -rw-r--r-- | Documentation/git-rebase.txt | 424 |
1 files changed, 336 insertions, 88 deletions
diff --git a/Documentation/git-rebase.txt b/Documentation/git-rebase.txt index dff17b3178..55af6fd24e 100644 --- a/Documentation/git-rebase.txt +++ b/Documentation/git-rebase.txt @@ -8,16 +8,16 @@ git-rebase - Reapply commits on top of another base tip SYNOPSIS -------- [verse] -'git rebase' [-i | --interactive] [<options>] [--exec <cmd>] [--onto <newbase>] - [<upstream> [<branch>]] +'git rebase' [-i | --interactive] [<options>] [--exec <cmd>] + [--onto <newbase> | --keep-base] [<upstream> [<branch>]] 'git rebase' [-i | --interactive] [<options>] [--exec <cmd>] [--onto <newbase>] --root [<branch>] -'git rebase' --continue | --skip | --abort | --quit | --edit-todo | --show-current-patch +'git rebase' (--continue | --skip | --abort | --quit | --edit-todo | --show-current-patch) DESCRIPTION ----------- If <branch> is specified, 'git rebase' will perform an automatic -`git checkout <branch>` before doing anything else. Otherwise +`git switch <branch>` before doing anything else. Otherwise it remains on the current branch. If <upstream> is not specified, the upstream configured in @@ -200,11 +200,6 @@ Alternatively, you can undo the 'git rebase' with git rebase --abort -CONFIGURATION -------------- - -include::config/rebase.txt[] - OPTIONS ------- --onto <newbase>:: @@ -217,6 +212,24 @@ As a special case, you may use "A\...B" as a shortcut for the merge base of A and B if there is exactly one merge base. You can leave out at most one of A and B, in which case it defaults to HEAD. +--keep-base:: + Set the starting point at which to create the new commits to the + merge base of <upstream> <branch>. Running + 'git rebase --keep-base <upstream> <branch>' is equivalent to + running 'git rebase --onto <upstream>... <upstream>'. ++ +This option is useful in the case where one is developing a feature on +top of an upstream branch. While the feature is being worked on, the +upstream branch may advance and it may not be the best idea to keep +rebasing on top of the upstream but to keep the base commit as-is. ++ +Although both this option and --fork-point find the merge base between +<upstream> and <branch>, this option uses the merge base as the _starting +point_ on which new commits will be created, whereas --fork-point uses +the merge base to determine the _set of commits_ which will be rebased. ++ +See also INCOMPATIBLE OPTIONS below. + <upstream>:: Upstream branch to compare against. May be any valid commit, not just an existing branch name. Defaults to the configured @@ -238,18 +251,79 @@ leave out at most one of A and B, in which case it defaults to HEAD. --quit:: Abort the rebase operation but HEAD is not reset back to the original branch. The index and working tree are also left - unchanged as a result. + unchanged as a result. If a temporary stash entry was created + using --autostash, it will be saved to the stash list. +--apply:: + Use applying strategies to rebase (calling `git-am` + internally). This option may become a no-op in the future + once the merge backend handles everything the apply one does. ++ +See also INCOMPATIBLE OPTIONS below. + +--empty={drop,keep,ask}:: + How to handle commits that are not empty to start and are not + clean cherry-picks of any upstream commit, but which become + empty after rebasing (because they contain a subset of already + upstream changes). With drop (the default), commits that + become empty are dropped. With keep, such commits are kept. + With ask (implied by --interactive), the rebase will halt when + an empty commit is applied allowing you to choose whether to + drop it, edit files more, or just commit the empty changes. + Other options, like --exec, will use the default of drop unless + -i/--interactive is explicitly specified. ++ +Note that commits which start empty are kept (unless --no-keep-empty +is specified), and commits which are clean cherry-picks (as determined +by `git log --cherry-mark ...`) are detected and dropped as a +preliminary step (unless --reapply-cherry-picks is passed). ++ +See also INCOMPATIBLE OPTIONS below. + +--no-keep-empty:: --keep-empty:: - Keep the commits that do not change anything from its - parents in the result. + Do not keep commits that start empty before the rebase + (i.e. that do not change anything from its parent) in the + result. The default is to keep commits which start empty, + since creating such commits requires passing the --allow-empty + override flag to `git commit`, signifying that a user is very + intentionally creating such a commit and thus wants to keep + it. ++ +Usage of this flag will probably be rare, since you can get rid of +commits that start empty by just firing up an interactive rebase and +removing the lines corresponding to the commits you don't want. This +flag exists as a convenient shortcut, such as for cases where external +tools generate many empty commits and you want them all removed. ++ +For commits which do not start empty but become empty after rebasing, +see the --empty flag. ++ +See also INCOMPATIBLE OPTIONS below. + +--reapply-cherry-picks:: +--no-reapply-cherry-picks:: + Reapply all clean cherry-picks of any upstream commit instead + of preemptively dropping them. (If these commits then become + empty after rebasing, because they contain a subset of already + upstream changes, the behavior towards them is controlled by + the `--empty` flag.) ++ +By default (or if `--no-reapply-cherry-picks` is given), these commits +will be automatically dropped. Because this necessitates reading all +upstream commits, this can be expensive in repos with a large number +of upstream commits that need to be read. ++ +`--reapply-cherry-picks` allows rebase to forgo reading all upstream +commits, potentially improving performance. + See also INCOMPATIBLE OPTIONS below. --allow-empty-message:: - By default, rebasing commits with an empty message will fail. - This option overrides that behavior, allowing commits with empty - messages to be rebased. + No-op. Rebasing commits with an empty message used to fail + and this option would override that behavior, allowing commits + with empty messages to be rebased. Now commits with an empty + message do not cause rebasing to halt. + See also INCOMPATIBLE OPTIONS below. @@ -268,7 +342,7 @@ See also INCOMPATIBLE OPTIONS below. --merge:: Use merging strategies to rebase. When the recursive (default) merge strategy is used, this allows rebase to be aware of renames on the - upstream side. + upstream side. This is the default. + Note that a rebase merge works by replaying each commit from the working branch on top of the <upstream> branch. Because of this, when a merge @@ -300,11 +374,19 @@ See also INCOMPATIBLE OPTIONS below. + See also INCOMPATIBLE OPTIONS below. +--rerere-autoupdate:: +--no-rerere-autoupdate:: + Allow the rerere mechanism to update the index with the + result of auto-conflict resolution if possible. + -S[<keyid>]:: --gpg-sign[=<keyid>]:: +--no-gpg-sign:: GPG-sign commits. The `keyid` argument is optional and defaults to the committer identity; if specified, it must be - stuck to the option without a space. + stuck to the option without a space. `--no-gpg-sign` is useful to + countermand both `commit.gpgSign` configuration variable, and + earlier `--gpg-sign`. -q:: --quiet:: @@ -333,7 +415,7 @@ See also INCOMPATIBLE OPTIONS below. Ensure at least <n> lines of surrounding context match before and after each change. When fewer lines of surrounding context exist they all must match. By default no context is - ever ignored. + ever ignored. Implies --apply. + See also INCOMPATIBLE OPTIONS below. @@ -362,25 +444,53 @@ When --fork-point is active, 'fork_point' will be used instead of <branch>` command (see linkgit:git-merge-base[1]). If 'fork_point' ends up being empty, the <upstream> will be used as a fallback. + -If either <upstream> or --root is given on the command line, then the -default is `--no-fork-point`, otherwise the default is `--fork-point`. +If <upstream> is given on the command line, then the default is +`--no-fork-point`, otherwise the default is `--fork-point`. ++ +If your branch was based on <upstream> but <upstream> was rewound and +your branch contains commits which were dropped, this option can be used +with `--keep-base` in order to drop those commits from your branch. ++ +See also INCOMPATIBLE OPTIONS below. --ignore-whitespace:: + Ignore whitespace differences when trying to reconcile +differences. Currently, each backend implements an approximation of +this behavior: ++ +apply backend: When applying a patch, ignore changes in whitespace in +context lines. Unfortunately, this means that if the "old" lines being +replaced by the patch differ only in whitespace from the existing +file, you will get a merge conflict instead of a successful patch +application. ++ +merge backend: Treat lines with only whitespace changes as unchanged +when merging. Unfortunately, this means that any patch hunks that were +intended to modify whitespace and nothing else will be dropped, even +if the other side had no changes that conflicted. + --whitespace=<option>:: - These flag are passed to the 'git apply' program + This flag is passed to the 'git apply' program (see linkgit:git-apply[1]) that applies the patch. + Implies --apply. + See also INCOMPATIBLE OPTIONS below. --committer-date-is-author-date:: + Instead of using the current time as the committer date, use + the author date of the commit being rebased as the committer + date. This option implies `--force-rebase`. + --ignore-date:: - These flags are passed to 'git am' to easily change the dates - of the rebased commits (see linkgit:git-am[1]). +--reset-author-date:: + Instead of using the author date of the original commit, use + the current time as the author date of the rebased commit. This + option implies `--force-rebase`. + See also INCOMPATIBLE OPTIONS below. --signoff:: - Add a Signed-off-by: trailer to all the rebased commits. Note + Add a `Signed-off-by` trailer to all the rebased commits. Note that if `--interactive` is given then only commits marked to be picked, edited or reworded will have the trailer added. + @@ -410,14 +520,14 @@ See also INCOMPATIBLE OPTIONS below. + By default, or when `no-rebase-cousins` was specified, commits which do not have `<upstream>` as direct ancestor will keep their original branch point, -i.e. commits that would be excluded by gitlink:git-log[1]'s +i.e. commits that would be excluded by linkgit:git-log[1]'s `--ancestry-path` option will keep their original ancestry by default. If the `rebase-cousins` mode is turned on, such commits are instead rebased onto `<upstream>` (or `<onto>`, if specified). + -The `--rebase-merges` mode is similar in spirit to `--preserve-merges`, but -in contrast to that option works well in interactive rebases: commits can be -reordered, inserted and dropped at will. +The `--rebase-merges` mode is similar in spirit to the deprecated +`--preserve-merges` but works with interactive rebases, +where commits can be reordered, inserted and dropped at will. + It is currently only possible to recreate the merge commits using the `recursive` merge strategy; Different merge strategies can be used only via @@ -427,9 +537,10 @@ See also REBASING MERGES and INCOMPATIBLE OPTIONS below. -p:: --preserve-merges:: - Recreate merge commits instead of flattening the history by replaying - commits a merge commit introduces. Merge conflict resolutions or manual - amendments to merge commits are not preserved. + [DEPRECATED: use `--rebase-merges` instead] Recreate merge commits + instead of flattening the history by replaying commits a merge commit + introduces. Merge conflict resolutions or manual amendments to merge + commits are not preserved. + This uses the `--interactive` machinery internally, but combining it with the `--interactive` option explicitly is generally not a good @@ -476,16 +587,17 @@ See also INCOMPATIBLE OPTIONS below. --autosquash:: --no-autosquash:: - When the commit log message begins with "squash! ..." (or - "fixup! ..."), and there is already a commit in the todo list that - matches the same `...`, automatically modify the todo list of rebase - -i so that the commit marked for squashing comes right after the - commit to be modified, and change the action of the moved commit - from `pick` to `squash` (or `fixup`). A commit matches the `...` if - the commit subject matches, or if the `...` refers to the commit's - hash. As a fall-back, partial matches of the commit subject work, - too. The recommended way to create fixup/squash commits is by using - the `--fixup`/`--squash` options of linkgit:git-commit[1]. + When the commit log message begins with "squash! ..." or "fixup! ..." + or "amend! ...", and there is already a commit in the todo list that + matches the same `...`, automatically modify the todo list of + `rebase -i`, so that the commit marked for squashing comes right after + the commit to be modified, and change the action of the moved commit + from `pick` to `squash` or `fixup` or `fixup -C` respectively. A commit + matches the `...` if the commit subject matches, or if the `...` refers + to the commit's hash. As a fall-back, partial matches of the commit + subject work, too. The recommended way to create fixup/amend/squash + commits is by using the `--fixup`, `--fixup=amend:` or `--fixup=reword:` + and `--squash` options respectively of linkgit:git-commit[1]. + If the `--autosquash` option is enabled by default using the configuration variable `rebase.autoSquash`, this option can be @@ -501,77 +613,196 @@ See also INCOMPATIBLE OPTIONS below. with care: the final stash application after a successful rebase might result in non-trivial conflicts. +--reschedule-failed-exec:: +--no-reschedule-failed-exec:: + Automatically reschedule `exec` commands that failed. This only makes + sense in interactive mode (or when an `--exec` option was provided). ++ +Even though this option applies once a rebase is started, it's set for +the whole rebase at the start based on either the +`rebase.rescheduleFailedExec` configuration (see linkgit:git-config[1] +or "CONFIGURATION" below) or whether this option is +provided. Otherwise an explicit `--no-reschedule-failed-exec` at the +start would be overridden by the presence of +`rebase.rescheduleFailedExec=true` configuration. + INCOMPATIBLE OPTIONS -------------------- -git-rebase has many flags that are incompatible with each other, -predominantly due to the fact that it has three different underlying -implementations: - - * one based on linkgit:git-am[1] (the default) - * one based on git-merge-recursive (merge backend) - * one based on linkgit:git-cherry-pick[1] (interactive backend) - -Flags only understood by the am backend: +The following options: - * --committer-date-is-author-date - * --ignore-date + * --apply * --whitespace - * --ignore-whitespace * -C -Flags understood by both merge and interactive backends: +are incompatible with the following options: * --merge * --strategy * --strategy-option * --allow-empty-message - -Flags only understood by the interactive backend: - * --[no-]autosquash * --rebase-merges * --preserve-merges * --interactive * --exec - * --keep-empty - * --autosquash + * --no-keep-empty + * --empty= + * --reapply-cherry-picks * --edit-todo * --root when used in combination with --onto -Other incompatible flag pairs: +In addition, the following pairs of options are incompatible: * --preserve-merges and --interactive * --preserve-merges and --signoff * --preserve-merges and --rebase-merges - * --rebase-merges and --strategy - * --rebase-merges and --strategy-option + * --preserve-merges and --empty= + * --preserve-merges and --ignore-whitespace + * --preserve-merges and --committer-date-is-author-date + * --preserve-merges and --ignore-date + * --keep-base and --onto + * --keep-base and --root + * --fork-point and --root BEHAVIORAL DIFFERENCES ----------------------- -There are some subtle differences how the backends behave. +git rebase has two primary backends: apply and merge. (The apply +backend used to be known as the 'am' backend, but the name led to +confusion as it looks like a verb instead of a noun. Also, the merge +backend used to be known as the interactive backend, but it is now +used for non-interactive cases as well. Both were renamed based on +lower-level functionality that underpinned each.) There are some +subtle differences in how these two backends behave: Empty commits ~~~~~~~~~~~~~ -The am backend drops any "empty" commits, regardless of whether the -commit started empty (had no changes relative to its parent to -start with) or ended empty (all changes were already applied -upstream in other commits). +The apply backend unfortunately drops intentionally empty commits, i.e. +commits that started empty, though these are rare in practice. It +also drops commits that become empty and has no option for controlling +this behavior. -The merge backend does the same. +The merge backend keeps intentionally empty commits by default (though +with -i they are marked as empty in the todo list editor, or they can +be dropped automatically with --no-keep-empty). -The interactive backend drops commits by default that -started empty and halts if it hits a commit that ended up empty. -The `--keep-empty` option exists for the interactive backend to allow -it to keep commits that started empty. +Similar to the apply backend, by default the merge backend drops +commits that become empty unless -i/--interactive is specified (in +which case it stops and asks the user what to do). The merge backend +also has an --empty={drop,keep,ask} option for changing the behavior +of handling commits that become empty. Directory rename detection ~~~~~~~~~~~~~~~~~~~~~~~~~~ -The merge and interactive backends work fine with -directory rename detection. The am backend sometimes does not. +Due to the lack of accurate tree information (arising from +constructing fake ancestors with the limited information available in +patches), directory rename detection is disabled in the apply backend. +Disabled directory rename detection means that if one side of history +renames a directory and the other adds new files to the old directory, +then the new files will be left behind in the old directory without +any warning at the time of rebasing that you may want to move these +files into the new directory. + +Directory rename detection works with the merge backend to provide you +warnings in such cases. + +Context +~~~~~~~ + +The apply backend works by creating a sequence of patches (by calling +`format-patch` internally), and then applying the patches in sequence +(calling `am` internally). Patches are composed of multiple hunks, +each with line numbers, a context region, and the actual changes. The +line numbers have to be taken with some fuzz, since the other side +will likely have inserted or deleted lines earlier in the file. The +context region is meant to help find how to adjust the line numbers in +order to apply the changes to the right lines. However, if multiple +areas of the code have the same surrounding lines of context, the +wrong one can be picked. There are real-world cases where this has +caused commits to be reapplied incorrectly with no conflicts reported. +Setting diff.context to a larger value may prevent such types of +problems, but increases the chance of spurious conflicts (since it +will require more lines of matching context to apply). + +The merge backend works with a full copy of each relevant file, +insulating it from these types of problems. + +Labelling of conflicts markers +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +When there are content conflicts, the merge machinery tries to +annotate each side's conflict markers with the commits where the +content came from. Since the apply backend drops the original +information about the rebased commits and their parents (and instead +generates new fake commits based off limited information in the +generated patches), those commits cannot be identified; instead it has +to fall back to a commit summary. Also, when merge.conflictStyle is +set to diff3, the apply backend will use "constructed merge base" to +label the content from the merge base, and thus provide no information +about the merge base commit whatsoever. + +The merge backend works with the full commits on both sides of history +and thus has no such limitations. + +Hooks +~~~~~ + +The apply backend has not traditionally called the post-commit hook, +while the merge backend has. Both have called the post-checkout hook, +though the merge backend has squelched its output. Further, both +backends only call the post-checkout hook with the starting point +commit of the rebase, not the intermediate commits nor the final +commit. In each case, the calling of these hooks was by accident of +implementation rather than by design (both backends were originally +implemented as shell scripts and happened to invoke other commands +like 'git checkout' or 'git commit' that would call the hooks). Both +backends should have the same behavior, though it is not entirely +clear which, if any, is correct. We will likely make rebase stop +calling either of these hooks in the future. + +Interruptability +~~~~~~~~~~~~~~~~ + +The apply backend has safety problems with an ill-timed interrupt; if +the user presses Ctrl-C at the wrong time to try to abort the rebase, +the rebase can enter a state where it cannot be aborted with a +subsequent `git rebase --abort`. The merge backend does not appear to +suffer from the same shortcoming. (See +https://lore.kernel.org/git/20200207132152.GC2868@szeder.dev/ for +details.) + +Commit Rewording +~~~~~~~~~~~~~~~~ + +When a conflict occurs while rebasing, rebase stops and asks the user +to resolve. Since the user may need to make notable changes while +resolving conflicts, after conflicts are resolved and the user has run +`git rebase --continue`, the rebase should open an editor and ask the +user to update the commit message. The merge backend does this, while +the apply backend blindly applies the original commit message. + +Miscellaneous differences +~~~~~~~~~~~~~~~~~~~~~~~~~ + +There are a few more behavioral differences that most folks would +probably consider inconsequential but which are mentioned for +completeness: + +* Reflog: The two backends will use different wording when describing + the changes made in the reflog, though both will make use of the + word "rebase". + +* Progress, informational, and error messages: The two backends + provide slightly different progress and informational messages. + Also, the apply backend writes error messages (such as "Your files + would be overwritten...") to stdout, while the merge backend writes + them to stderr. + +* State directories: The two backends keep their state in different + directories under .git/ include::merge-strategies.txt[] @@ -659,9 +890,17 @@ If you want to fold two or more commits into one, replace the command "pick" for the second and subsequent commits with "squash" or "fixup". If the commits had different authors, the folded commit will be attributed to the author of the first commit. The suggested commit -message for the folded commit is the concatenation of the commit -messages of the first commit and of those with the "squash" command, -but omits the commit messages of commits with the "fixup" command. +message for the folded commit is the concatenation of the first +commit's message with those identified by "squash" commands, omitting the +messages of commits identified by "fixup" commands, unless "fixup -c" +is used. In that case the suggested commit message is only the message +of the "fixup -c" commit, and an editor is opened allowing you to edit +the message. The contents (patch) of the "fixup -c" commit are still +incorporated into the folded commit. If there is more than one "fixup -c" +commit, the message from the final one is used. You can also use +"fixup -C" to get the same behavior as "fixup -c" except without opening +an editor. + 'git rebase' will stop when "pick" has been replaced with "edit" or when a command fails due to merge errors. When you are done editing @@ -677,7 +916,8 @@ $ git rebase -i HEAD~5 And move the first patch to the end of the list. -You might want to preserve merges, if you have a history like this: +You might want to recreate merge commits, e.g. if you have a history +like this: ------------------ X @@ -691,7 +931,7 @@ Suppose you want to rebase the side branch starting at "A" to "Q". Make sure that the current HEAD is "B", and call ----------------------------- -$ git rebase -i -p --onto Q O +$ git rebase -i -r --onto Q O ----------------------------- Reordering and editing commits usually creates untested intermediate @@ -833,7 +1073,8 @@ Hard case: The changes are not the same.:: This happens if the 'subsystem' rebase had conflicts, or used `--interactive` to omit, edit, squash, or fixup commits; or if the upstream used one of `commit --amend`, `reset`, or - `filter-branch`. + a full history rewriting command like + https://github.com/newren/git-filter-repo[`filter-repo`]. The easy case @@ -844,7 +1085,8 @@ Only works if the changes (patch IDs based on the diff contents) on 'subsystem' did. In that case, the fix is easy because 'git rebase' knows to skip -changes that are already present in the new upstream. So if you say +changes that are already present in the new upstream (unless +`--reapply-cherry-picks` is given). So if you say (assuming you're on 'topic') ------------ $ git rebase subsystem @@ -871,7 +1113,7 @@ NOTE: While an "easy case recovery" sometimes appears to be successful --interactive` will be **resurrected**! The idea is to manually tell 'git rebase' "where the old 'subsystem' -ended and your 'topic' began", that is, what the old merge-base +ended and your 'topic' began", that is, what the old merge base between them was. You will have to find a way to name the last commit of the old 'subsystem', for example: @@ -979,7 +1221,7 @@ when the merge operation did not even start), it is rescheduled immediately. At this time, the `merge` command will *always* use the `recursive` merge strategy for regular merges, and `octopus` for octopus merges, -strategy, with no way to choose a different one. To work around +with no way to choose a different one. To work around this, an `exec` command can be used to call `git merge` explicitly, using the fact that the labels are worktree-local refs (the ref `refs/rewritten/onto` would correspond to the label `onto`, for example). @@ -1026,13 +1268,19 @@ merge tlsv1.3 merge cmake ------------ +CONFIGURATION +------------- + +include::config/rebase.txt[] +include::config/sequencer.txt[] + BUGS ---- -The todo list presented by `--preserve-merges --interactive` does not -represent the topology of the revision graph. Editing commits and -rewording their commit messages should work fine, but attempts to -reorder commits tend to produce counterintuitive results. Use -`--rebase-merges` in such scenarios instead. +The todo list presented by the deprecated `--preserve-merges --interactive` +does not represent the topology of the revision graph (use `--rebase-merges` +instead). Editing commits and rewording their commit messages should work +fine, but attempts to reorder commits tend to produce counterintuitive results. +Use `--rebase-merges` in such scenarios instead. For example, an attempt to rearrange ------------ |