diff options
Diffstat (limited to 'Documentation/git-push.txt')
| -rw-r--r-- | Documentation/git-push.txt | 183 |
1 files changed, 126 insertions, 57 deletions
diff --git a/Documentation/git-push.txt b/Documentation/git-push.txt index ba6a8a2fb2..8b637d339f 100644 --- a/Documentation/git-push.txt +++ b/Documentation/git-push.txt @@ -10,8 +10,8 @@ SYNOPSIS -------- [verse] 'git push' [--all | --mirror | --tags] [-n | --dry-run] [--receive-pack=<git-receive-pack>] - [--repo=<repository>] [-f | --force] [-v | --verbose] - [<repository> <refspec>...] + [--repo=<repository>] [-f | --force] [--prune] [-v | --verbose] [-u | --set-upstream] + [<repository> [<refspec>...]] DESCRIPTION ----------- @@ -34,14 +34,16 @@ OPTIONS[[OPTIONS]] <refspec>...:: The format of a <refspec> parameter is an optional plus - `{plus}`, followed by the source ref <src>, followed + `+`, followed by the source ref <src>, followed by a colon `:`, followed by the destination ref <dst>. It is used to specify with what <src> object the <dst> ref - in the remote repository is to be updated. + in the remote repository is to be updated. If not specified, + the behavior of the command is controlled by the `push.default` + configuration variable. + The <src> is often the name of the branch you would want to push, but it can be any arbitrary "SHA-1 expression", such as `master~4` or -`HEAD` (see linkgit:git-rev-parse[1]). +`HEAD` (see linkgit:gitrevisions[7]). + The <dst> tells which ref on the remote side is updated with this push. Arbitrary expressions cannot be used here, an actual ref must @@ -50,9 +52,9 @@ updated. + The object referenced by <src> is used to update the <dst> reference on the remote side, but by default this is only allowed if the -update can fast forward <dst>. By having the optional leading `{plus}`, +update can fast-forward <dst>. By having the optional leading `+`, you can tell git to update the <dst> ref even when the update is not a -fast forward. This does *not* attempt to merge <src> into <dst>. See +fast-forward. This does *not* attempt to merge <src> into <dst>. See EXAMPLES below for details. + `tag <tag>` means the same as `refs/tags/<tag>:refs/tags/<tag>`. @@ -60,20 +62,29 @@ EXAMPLES below for details. Pushing an empty <src> allows you to delete the <dst> ref from the remote repository. + -The special refspec `:` (or `{plus}:` to allow non-fast forward updates) +The special refspec `:` (or `+:` to allow non-fast-forward updates) directs git to push "matching" branches: for every branch that exists on the local side, the remote side is updated if a branch of the same name already exists on the remote side. This is the default operation mode if no explicit refspec is found (that is neither on the command line -nor in any Push line of the corresponding remotes file---see below). +nor in any Push line of the corresponding remotes file---see below) and +no `push.default` configuration variable is set. --all:: Instead of naming each ref to push, specifies that all - refs under `$GIT_DIR/refs/heads/` be pushed. + refs under `refs/heads/` be pushed. + +--prune:: + Remove remote branches that don't have a local counterpart. For example + a remote branch `tmp` will be removed if a local branch with the same + name doesn't exist any more. This also respects refspecs, e.g. + `git push --prune remote refs/heads/*:refs/tmp/*` would + make sure that remote `refs/tmp/foo` will be removed if `refs/heads/foo` + doesn't exist. --mirror:: Instead of naming each ref to push, specifies that all - refs under `$GIT_DIR/refs/` (which includes but is not + refs under `refs/` (which includes but is not limited to `refs/heads/`, `refs/remotes/`, and `refs/tags/`) be mirrored to the remote repository. Newly created local refs will be pushed to the remote end, locally updated refs @@ -91,8 +102,12 @@ nor in any Push line of the corresponding remotes file---see below). will be tab-separated and sent to stdout instead of stderr. The full symbolic names of the refs will be given. +--delete:: + All listed refs are deleted from the remote repository. This is + the same as prefixing all refs with a colon. + --tags:: - All refs under `$GIT_DIR/refs/tags` are pushed, in + All refs under `refs/tags` are pushed, in addition to refspecs explicitly listed on the command line. @@ -112,7 +127,7 @@ nor in any Push line of the corresponding remotes file---see below). --repo=<repository>:: This option is only relevant if no <repository> argument is - passed in the invocation. In this case, 'git-push' derives the + passed in the invocation. In this case, 'git push' derives the remote name from the current branch: If it tracks a remote branch, then that remote repository is pushed to. Otherwise, the name "origin" is used. For this latter case, this option @@ -126,18 +141,50 @@ git push --repo=public #2 + is that #1 always pushes to "public" whereas #2 pushes to "public" only if the current branch does not track a remote branch. This is -useful if you write an alias or script around 'git-push'. +useful if you write an alias or script around 'git push'. + +-u:: +--set-upstream:: + For every branch that is up to date or successfully pushed, add + upstream (tracking) reference, used by argument-less + linkgit:git-pull[1] and other commands. For more information, + see 'branch.<name>.merge' in linkgit:git-config[1]. --thin:: --no-thin:: - These options are passed to 'git-send-pack'. Thin - transfer spends extra cycles to minimize the number of - objects to be sent and meant to be used on slower connection. + These options are passed to linkgit:git-send-pack[1]. A thin transfer + significantly reduces the amount of sent data when the sender and + receiver share many of the same objects in common. The default is + \--thin. + +-q:: +--quiet:: + Suppress all output, including the listing of updated refs, + unless an error occurs. Progress is not reported to the standard + error stream. -v:: --verbose:: Run verbosely. +--progress:: + Progress status is reported on the standard error stream + by default when it is attached to a terminal, unless -q + is specified. This flag forces progress status even if the + standard error stream is not directed to a terminal. + +--recurse-submodules=check|on-demand:: + Make sure all submodule commits used by the revisions to be + pushed are available on a remote-tracking branch. If 'check' is + used git will verify that all submodule commits that changed in + the revisions to be pushed are available on at least one remote + of the submodule. If any commits are missing the push will be + aborted and exit with non-zero status. If 'on-demand' is used + all submodules that changed in the revisions to be pushed will + be pushed. If on-demand was not able to push all necessary + revisions it will also be aborted and exit with non-zero status. + + include::urls-remotes.txt[] OUTPUT @@ -160,27 +207,45 @@ If --porcelain is used, then each line of the output is of the form: <flag> \t <from>:<to> \t <summary> (<reason>) ------------------------------- +The status of up-to-date refs is shown only if --porcelain or --verbose +option is used. + flag:: - A single character indicating the status of the ref. This is - blank for a successfully pushed ref, `!` for a ref that was - rejected or failed to push, and '=' for a ref that was up to - date and did not need pushing (note that the status of up to - date refs is shown only when `git push` is running verbosely). + A single character indicating the status of the ref: +(space);; for a successfully pushed fast-forward; +`+`;; for a successful forced update; +`-`;; for a successfully deleted ref; +`*`;; for a successfully pushed new ref; +`!`;; for a ref that was rejected or failed to push; and +`=`;; for a ref that was up to date and did not need pushing. summary:: For a successfully pushed ref, the summary shows the old and new values of the ref in a form suitable for using as an argument to `git log` (this is `<old>..<new>` in most cases, and - `<old>...<new>` for forced non-fast forward updates). For a - failed update, more details are given for the failure. - The string `rejected` indicates that git did not try to send the - ref at all (typically because it is not a fast forward). The - string `remote rejected` indicates that the remote end refused - the update; this rejection is typically caused by a hook on the - remote side. The string `remote failure` indicates that the - remote end did not report the successful update of the ref - (perhaps because of a temporary error on the remote side, a - break in the network connection, or other transient error). + `<old>...<new>` for forced non-fast-forward updates). ++ +For a failed update, more details are given: ++ +-- +rejected:: + Git did not try to send the ref at all, typically because it + is not a fast-forward and you did not force the update. + +remote rejected:: + The remote end refused the update. Usually caused by a hook + on the remote side, or because the remote repository has one + of the following safety options in effect: + `receive.denyCurrentBranch` (for pushes to the checked out + branch), `receive.denyNonFastForwards` (for forced + non-fast-forward updates), `receive.denyDeletes` or + `receive.denyDeleteCurrent`. See linkgit:git-config[1]. + +remote failure:: + The remote end did not report the successful update of the ref, + perhaps because of a temporary error on the remote side, a + break in the network connection, or other transient error. +-- from:: The name of the local ref being pushed, minus its @@ -221,7 +286,8 @@ leading to commit A. The history looks like this: ---------------- Further suppose that the other person already pushed changes leading to A -back to the original repository you two obtained the original commit X. +back to the original repository from which you two obtained the original +commit X. The push done by the other person updated the branch that used to point at commit X to point at commit A. It is a fast-forward. @@ -285,66 +351,79 @@ a case where you do mean to lose history. Examples -------- -git push:: +`git push`:: Works like `git push <remote>`, where <remote> is the current branch's remote (or `origin`, if no remote is configured for the current branch). -git push origin:: +`git push origin`:: Without additional configuration, works like `git push origin :`. + The default behavior of this command when no <refspec> is given can be -configured by setting the `push` option of the remote. +configured by setting the `push` option of the remote, or the `push.default` +configuration variable. + For example, to default to pushing only the current branch to `origin` use `git config remote.origin.push HEAD`. Any valid <refspec> (like the ones in the examples below) can be configured as the default for `git push origin`. -git push origin ::: +`git push origin :`:: Push "matching" branches to `origin`. See <refspec> in the <<OPTIONS,OPTIONS>> section above for a description of "matching" branches. -git push origin master:: +`git push origin master`:: Find a ref that matches `master` in the source repository (most likely, it would find `refs/heads/master`), and update the same ref (e.g. `refs/heads/master`) in `origin` repository with it. If `master` did not exist remotely, it would be created. -git push origin HEAD:: +`git push origin HEAD`:: A handy way to push the current branch to the same name on the remote. -git push origin master:satellite/master dev:satellite/dev:: +`git push mothership master:satellite/master dev:satellite/dev`:: Use the source ref that matches `master` (e.g. `refs/heads/master`) to update the ref that matches `satellite/master` (most probably - `refs/remotes/satellite/master`) in the `origin` repository, then + `refs/remotes/satellite/master`) in the `mothership` repository; do the same for `dev` and `satellite/dev`. ++ +This is to emulate `git fetch` run on the `mothership` using `git +push` that is run in the opposite direction in order to integrate +the work done on `satellite`, and is often necessary when you can +only make connection in one way (i.e. satellite can ssh into +mothership but mothership cannot initiate connection to satellite +because the latter is behind a firewall or does not run sshd). ++ +After running this `git push` on the `satellite` machine, you would +ssh into the `mothership` and run `git merge` there to complete the +emulation of `git pull` that were run on `mothership` to pull changes +made on `satellite`. -git push origin HEAD:master:: +`git push origin HEAD:master`:: Push the current branch to the remote ref matching `master` in the `origin` repository. This form is convenient to push the current branch without thinking about its local name. -git push origin master:refs/heads/experimental:: +`git push origin master:refs/heads/experimental`:: Create the branch `experimental` in the `origin` repository by copying the current `master` branch. This form is only needed to create a new branch or tag in the remote repository when the local name and the remote name are different; otherwise, the ref name on its own will work. -git push origin :experimental:: +`git push origin :experimental`:: Find a ref that matches `experimental` in the `origin` repository (e.g. `refs/heads/experimental`), and delete it. -git push origin {plus}dev:master:: +`git push origin +dev:master`:: Update the origin repository's master branch with the dev branch, - allowing non-fast forward updates. *This can leave unreferenced + allowing non-fast-forward updates. *This can leave unreferenced commits dangling in the origin repository.* Consider the - following situation, where a fast forward is not possible: + following situation, where a fast-forward is not possible: + ---- o---o---o---A---B origin/master @@ -364,16 +443,6 @@ Commits A and B would no longer belong to a branch with a symbolic name, and so would be unreachable. As such, these commits would be removed by a `git gc` command on the origin repository. - -Author ------- -Written by Junio C Hamano <gitster@pobox.com>, later rewritten in C -by Linus Torvalds <torvalds@osdl.org> - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. - GIT --- Part of the linkgit:git[1] suite |