diff options
Diffstat (limited to 'Documentation/git-push.txt')
| -rw-r--r-- | Documentation/git-push.txt | 359 |
1 files changed, 289 insertions, 70 deletions
diff --git a/Documentation/git-push.txt b/Documentation/git-push.txt index 89e0049bce..620f8b421f 100644 --- a/Documentation/git-push.txt +++ b/Documentation/git-push.txt @@ -9,8 +9,9 @@ git-push - Update remote refs along with associated objects SYNOPSIS -------- [verse] -'git-push' [--all] [--dry-run] [--tags] [--receive-pack=<git-receive-pack>] - [--repo=all] [-f | --force] [-v | --verbose] [<repository> <refspec>...] +'git push' [--all | --mirror | --tags] [-n | --dry-run] [--receive-pack=<git-receive-pack>] + [--repo=<repository>] [-f | --force] [--prune] [-v | --verbose] [-u | --set-upstream] + [<repository> [<refspec>...]] DESCRIPTION ----------- @@ -23,51 +24,65 @@ every time you push into it, by setting up 'hooks' there. See documentation for linkgit:git-receive-pack[1]. -OPTIONS -------- +OPTIONS[[OPTIONS]] +------------------ <repository>:: The "remote" repository that is destination of a push - operation. See the section <<URLS,GIT URLS>> below. - -<refspec>:: - The canonical format of a <refspec> parameter is - `+?<src>:<dst>`; that is, an optional plus `+`, followed - by the source ref, followed by a colon `:`, followed by - the destination ref. + operation. This parameter can be either a URL + (see the section <<URLS,GIT URLS>> below) or the name + of a remote (see the section <<REMOTES,REMOTES>> below). + +<refspec>...:: + The format of a <refspec> parameter is an optional plus + `+`, followed by the source ref <src>, followed + by a colon `:`, followed by the destination ref <dst>. + It is used to specify with what <src> object the <dst> ref + in the remote repository is to be updated. + -The <src> side represents the source branch (or arbitrary -"SHA1 expression", such as `master~4` (four parents before the -tip of `master` branch); see linkgit:git-rev-parse[1]) that you -want to push. The <dst> side represents the destination location. +The <src> is often the name of the branch you would want to push, but +it can be any arbitrary "SHA-1 expression", such as `master~4` or +`HEAD` (see linkgit:gitrevisions[7]). + -The local ref that matches <src> is used -to fast forward the remote ref that matches <dst> (or, if no <dst> was -specified, the same ref that <src> referred to locally). If -the optional leading plus `+` is used, the remote ref is updated -even if it does not result in a fast forward update. +The <dst> tells which ref on the remote side is updated with this +push. Arbitrary expressions cannot be used here, an actual ref must +be named. If `:`<dst> is omitted, the same ref as <src> will be +updated. + -`tag <tag>` means the same as `refs/tags/<tag>:refs/tags/<tag>`. +The object referenced by <src> is used to update the <dst> reference +on the remote side, but by default this is only allowed if the +update can fast-forward <dst>. By having the optional leading `+`, +you can tell git to update the <dst> ref even when the update is not a +fast-forward. This does *not* attempt to merge <src> into <dst>. See +EXAMPLES below for details. + -A parameter <ref> without a colon pushes the <ref> from the source -repository to the destination repository under the same name. +`tag <tag>` means the same as `refs/tags/<tag>:refs/tags/<tag>`. + Pushing an empty <src> allows you to delete the <dst> ref from the remote repository. + -The special refspec `:` (or `+:` to allow non-fast forward updates) -directs git to push "matching" heads: for every head that exists on -the local side, the remote side is updated if a head of the same name +The special refspec `:` (or `+:` to allow non-fast-forward updates) +directs git to push "matching" branches: for every branch that exists on +the local side, the remote side is updated if a branch of the same name already exists on the remote side. This is the default operation mode if no explicit refspec is found (that is neither on the command line nor in any Push line of the corresponding remotes file---see below). --all:: Instead of naming each ref to push, specifies that all - refs under `$GIT_DIR/refs/heads/` be pushed. + refs under `refs/heads/` be pushed. + +--prune:: + Remove remote branches that don't have a local counterpart. For example + a remote branch `tmp` will be removed if a local branch with the same + name doesn't exist any more. This also respects refspecs, e.g. + `git push --prune remote refs/heads/*:refs/tmp/*` would + make sure that remote `refs/tmp/foo` will be removed if `refs/heads/foo` + doesn't exist. --mirror:: Instead of naming each ref to push, specifies that all - refs under `$GIT_DIR/refs/heads/` and `$GIT_DIR/refs/tags/` + refs under `refs/` (which includes but is not + limited to `refs/heads/`, `refs/remotes/`, and `refs/tags/`) be mirrored to the remote repository. Newly created local refs will be pushed to the remote end, locally updated refs will be force updated on the remote end, and deleted refs @@ -75,23 +90,31 @@ nor in any Push line of the corresponding remotes file---see below). if the configuration option `remote.<remote>.mirror` is set. +-n:: --dry-run:: Do everything except actually send the updates. +--porcelain:: + Produce machine-readable output. The output status line for each ref + will be tab-separated and sent to stdout instead of stderr. The full + symbolic names of the refs will be given. + +--delete:: + All listed refs are deleted from the remote repository. This is + the same as prefixing all refs with a colon. + --tags:: - All refs under `$GIT_DIR/refs/tags` are pushed, in + All refs under `refs/tags` are pushed, in addition to refspecs explicitly listed on the command line. --receive-pack=<git-receive-pack>:: +--exec=<git-receive-pack>:: Path to the 'git-receive-pack' program on the remote end. Sometimes useful when pushing to a remote repository over ssh, and you do not have the program in a directory on the default $PATH. ---exec=<git-receive-pack>:: - Same as \--receive-pack=<git-receive-pack>. - -f:: --force:: Usually, the command refuses to update a remote ref that is @@ -99,20 +122,60 @@ nor in any Push line of the corresponding remotes file---see below). This flag disables the check. This can cause the remote repository to lose commits; use it with care. ---repo=<repo>:: - When no repository is specified the command defaults to - "origin"; this overrides it. +--repo=<repository>:: + This option is only relevant if no <repository> argument is + passed in the invocation. In this case, 'git push' derives the + remote name from the current branch: If it tracks a remote + branch, then that remote repository is pushed to. Otherwise, + the name "origin" is used. For this latter case, this option + can be used to override the name "origin". In other words, + the difference between these two commands ++ +-------------------------- +git push public #1 +git push --repo=public #2 +-------------------------- ++ +is that #1 always pushes to "public" whereas #2 pushes to "public" +only if the current branch does not track a remote branch. This is +useful if you write an alias or script around 'git push'. + +-u:: +--set-upstream:: + For every branch that is up to date or successfully pushed, add + upstream (tracking) reference, used by argument-less + linkgit:git-pull[1] and other commands. For more information, + see 'branch.<name>.merge' in linkgit:git-config[1]. --thin:: --no-thin:: - These options are passed to `git-send-pack`. Thin - transfer spends extra cycles to minimize the number of - objects to be sent and meant to be used on slower connection. + These options are passed to linkgit:git-send-pack[1]. A thin transfer + significantly reduces the amount of sent data when the sender and + receiver share many of the same objects in common. The default is + \--thin. + +-q:: +--quiet:: + Suppress all output, including the listing of updated refs, + unless an error occurs. Progress is not reported to the standard + error stream. -v:: --verbose:: Run verbosely. +--progress:: + Progress status is reported on the standard error stream + by default when it is attached to a terminal, unless -q + is specified. This flag forces progress status even if the + standard error stream is not directed to a terminal. + +--recurse-submodules=check:: + Check whether all submodule commits used by the revisions to be + pushed are available on a remote tracking branch. Otherwise the + push will be aborted and the command will exit with non-zero status. + + include::urls-remotes.txt[] OUTPUT @@ -129,27 +192,51 @@ representing the status of a single ref. Each line is of the form: <flag> <summary> <from> -> <to> (<reason>) ------------------------------- +If --porcelain is used, then each line of the output is of the form: + +------------------------------- + <flag> \t <from>:<to> \t <summary> (<reason>) +------------------------------- + +The status of up-to-date refs is shown only if --porcelain or --verbose +option is used. + flag:: - A single character indicating the status of the ref. This is - blank for a successfully pushed ref, `!` for a ref that was - rejected or failed to push, and '=' for a ref that was up to - date and did not need pushing (note that the status of up to - date refs is shown only when `git push` is running verbosely). + A single character indicating the status of the ref: +(space);; for a successfully pushed fast-forward; +`+`;; for a successful forced update; +`-`;; for a successfully deleted ref; +`*`;; for a successfully pushed new ref; +`!`;; for a ref that was rejected or failed to push; and +`=`;; for a ref that was up to date and did not need pushing. summary:: For a successfully pushed ref, the summary shows the old and new values of the ref in a form suitable for using as an argument to `git log` (this is `<old>..<new>` in most cases, and - `<old>...<new>` for forced non-fast forward updates). For a - failed update, more details are given for the failure. - The string `rejected` indicates that git did not try to send the - ref at all (typically because it is not a fast forward). The - string `remote rejected` indicates that the remote end refused - the update; this rejection is typically caused by a hook on the - remote side. The string `remote failure` indicates that the - remote end did not report the successful update of the ref - (perhaps because of a temporary error on the remote side, a - break in the network connection, or other transient error). + `<old>...<new>` for forced non-fast-forward updates). ++ +For a failed update, more details are given: ++ +-- +rejected:: + Git did not try to send the ref at all, typically because it + is not a fast-forward and you did not force the update. + +remote rejected:: + The remote end refused the update. Usually caused by a hook + on the remote side, or because the remote repository has one + of the following safety options in effect: + `receive.denyCurrentBranch` (for pushes to the checked out + branch), `receive.denyNonFastForwards` (for forced + non-fast-forward updates), `receive.denyDeletes` or + `receive.denyDeleteCurrent`. See linkgit:git-config[1]. + +remote failure:: + The remote end did not report the successful update of the ref, + perhaps because of a temporary error on the remote side, a + break in the network connection, or other transient error. +-- from:: The name of the local ref being pushed, minus its @@ -165,41 +252,173 @@ reason:: refs, no explanation is needed. For a failed ref, the reason for failure is described. +Note about fast-forwards +------------------------ + +When an update changes a branch (or more in general, a ref) that used to +point at commit A to point at another commit B, it is called a +fast-forward update if and only if B is a descendant of A. + +In a fast-forward update from A to B, the set of commits that the original +commit A built on top of is a subset of the commits the new commit B +builds on top of. Hence, it does not lose any history. + +In contrast, a non-fast-forward update will lose history. For example, +suppose you and somebody else started at the same commit X, and you built +a history leading to commit B while the other person built a history +leading to commit A. The history looks like this: + +---------------- + + B + / + ---X---A + +---------------- + +Further suppose that the other person already pushed changes leading to A +back to the original repository you two obtained the original commit X. + +The push done by the other person updated the branch that used to point at +commit X to point at commit A. It is a fast-forward. + +But if you try to push, you will attempt to update the branch (that +now points at A) with commit B. This does _not_ fast-forward. If you did +so, the changes introduced by commit A will be lost, because everybody +will now start building on top of B. + +The command by default does not allow an update that is not a fast-forward +to prevent such loss of history. + +If you do not want to lose your work (history from X to B) nor the work by +the other person (history from X to A), you would need to first fetch the +history from the repository, create a history that contains changes done +by both parties, and push the result back. + +You can perform "git pull", resolve potential conflicts, and "git push" +the result. A "git pull" will create a merge commit C between commits A +and B. + +---------------- + + B---C + / / + ---X---A + +---------------- + +Updating A with the resulting merge commit will fast-forward and your +push will be accepted. + +Alternatively, you can rebase your change between X and B on top of A, +with "git pull --rebase", and push the result back. The rebase will +create a new commit D that builds the change between X and B on top of +A. + +---------------- + + B D + / / + ---X---A + +---------------- + +Again, updating A with this commit will fast-forward and your push will be +accepted. + +There is another common situation where you may encounter non-fast-forward +rejection when you try to push, and it is possible even when you are +pushing into a repository nobody else pushes into. After you push commit +A yourself (in the first picture in this section), replace it with "git +commit --amend" to produce commit B, and you try to push it out, because +forgot that you have pushed A out already. In such a case, and only if +you are certain that nobody in the meantime fetched your earlier commit A +(and started building on top of it), you can run "git push --force" to +overwrite it. In other words, "git push --force" is a method reserved for +a case where you do mean to lose history. + + Examples -------- -git push origin master:: +`git push`:: + Works like `git push <remote>`, where <remote> is the + current branch's remote (or `origin`, if no remote is + configured for the current branch). + +`git push origin`:: + Without additional configuration, works like + `git push origin :`. ++ +The default behavior of this command when no <refspec> is given can be +configured by setting the `push` option of the remote. ++ +For example, to default to pushing only the current branch to `origin` +use `git config remote.origin.push HEAD`. Any valid <refspec> (like +the ones in the examples below) can be configured as the default for +`git push origin`. + +`git push origin :`:: + Push "matching" branches to `origin`. See + <refspec> in the <<OPTIONS,OPTIONS>> section above for a + description of "matching" branches. + +`git push origin master`:: Find a ref that matches `master` in the source repository (most likely, it would find `refs/heads/master`), and update the same ref (e.g. `refs/heads/master`) in `origin` repository with it. If `master` did not exist remotely, it would be created. -git push origin :experimental:: - Find a ref that matches `experimental` in the `origin` repository - (e.g. `refs/heads/experimental`), and delete it. +`git push origin HEAD`:: + A handy way to push the current branch to the same name on the + remote. -git push origin master:satellite/master:: - Find a ref that matches `master` in the source repository - (most likely, it would find `refs/heads/master`), and update - the ref that matches `satellite/master` (most likely, it would - be `refs/remotes/satellite/master`) in `origin` repository with it. +`git push origin master:satellite/master dev:satellite/dev`:: + Use the source ref that matches `master` (e.g. `refs/heads/master`) + to update the ref that matches `satellite/master` (most probably + `refs/remotes/satellite/master`) in the `origin` repository, then + do the same for `dev` and `satellite/dev`. -git push origin master:refs/heads/experimental:: +`git push origin HEAD:master`:: + Push the current branch to the remote ref matching `master` in the + `origin` repository. This form is convenient to push the current + branch without thinking about its local name. + +`git push origin master:refs/heads/experimental`:: Create the branch `experimental` in the `origin` repository by copying the current `master` branch. This form is only needed to create a new branch or tag in the remote repository when the local name and the remote name are different; otherwise, the ref name on its own will work. -Author ------- -Written by Junio C Hamano <junkio@cox.net>, later rewritten in C -by Linus Torvalds <torvalds@osdl.org> +`git push origin :experimental`:: + Find a ref that matches `experimental` in the `origin` repository + (e.g. `refs/heads/experimental`), and delete it. -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. +`git push origin +dev:master`:: + Update the origin repository's master branch with the dev branch, + allowing non-fast-forward updates. *This can leave unreferenced + commits dangling in the origin repository.* Consider the + following situation, where a fast-forward is not possible: ++ +---- + o---o---o---A---B origin/master + \ + X---Y---Z dev +---- ++ +The above command would change the origin repository to ++ +---- + A---B (unnamed branch) + / + o---o---o---X---Y---Z master +---- ++ +Commits A and B would no longer belong to a branch with a symbolic name, +and so would be unreachable. As such, these commits would be removed by +a `git gc` command on the origin repository. GIT --- |